diff options
Diffstat (limited to '')
| -rw-r--r-- | doc/tarlz.texi | 171 |
1 files changed, 106 insertions, 65 deletions
diff --git a/doc/tarlz.texi b/doc/tarlz.texi index 3d2f668..25acaf8 100644 --- a/doc/tarlz.texi +++ b/doc/tarlz.texi @@ -6,8 +6,8 @@ @finalout @c %**end of header -@set UPDATED 11 April 2019 -@set VERSION 0.15 +@set UPDATED 8 October 2019 +@set VERSION 0.16 @dircategory Data Compression @direntry @@ -37,6 +37,7 @@ This manual is for Tarlz (version @value{VERSION}, @value{UPDATED}). @menu * Introduction:: Purpose and features of tarlz * Invoking tarlz:: Command line interface +* Portable character set:: POSIX portable filename character set * File format:: Detailed format of the compressed archive * Amendments to pax format:: The reasons for the differences with pax * Multi-threaded tar:: Limitations of parallel tar decoding @@ -60,13 +61,19 @@ to copy, distribute and modify it. @uref{http://www.nongnu.org/lzip/tarlz.html,,Tarlz} is a massively parallel (multi-threaded) combined implementation of the tar archiver and the @uref{http://www.nongnu.org/lzip/lzip.html,,lzip} compressor. Tarlz creates, -lists and extracts archives in a simplified posix pax format compressed with -lzip, keeping the alignment between tar members and lzip members. This -method adds an indexed lzip layer on top of the tar archive, making it -possible to decode the archive safely in parallel. The resulting multimember -tar.lz archive is fully backward compatible with standard tar tools like GNU -tar, which treat it like any other tar.lz archive. Tarlz can append files to -the end of such compressed archives. +lists and extracts archives in a simplified and safer variant of the POSIX +pax format compressed with lzip, keeping the alignment between tar members +and lzip members. The resulting multimember tar.lz archive is fully backward +compatible with standard tar tools like GNU tar, which treat it like any +other tar.lz archive. Tarlz can append files to the end of such compressed +archives. + +Keeping the alignment between tar members and lzip members has two +advantages. It adds an indexed lzip layer on top of the tar archive, making +it possible to decode the archive safely in parallel. It also minimizes the +amount of data lost in case of corruption. Compressing a tar archive with +plzip may even double the amount of files lost for each lzip member damaged +because it does not keep the members aligned. Tarlz can create tar archives with five levels of compression granularity; per file (---no-solid), per block (---bsolid, default), per directory @@ -88,7 +95,7 @@ member), and unwanted members can be deleted from the archive. Just like an uncompressed tar archive. @item -It is a safe posix-style backup format. In case of corruption, +It is a safe POSIX-style backup format. In case of corruption, tarlz can extract all the undamaged members from the tar.lz archive, skipping over the damaged members, just like the standard (uncompressed) tar. Moreover, the option @samp{--keep-damaged} can be @@ -105,7 +112,9 @@ Tarlz protects the extended records with a CRC in a way compatible with standard tar tools. @xref{crc32}. Tarlz does not understand other tar formats like @samp{gnu}, @samp{oldgnu}, -@samp{star} or @samp{v7}. +@samp{star} or @samp{v7}. @w{@samp{tarlz -tf archive.tar.lz > /dev/null}} +can be used to verify that the format of the archive is compatible with +tarlz. @node Invoking tarlz @@ -126,10 +135,10 @@ All operations except @samp{--concatenate} operate on whole trees if any @var{file} is a directory. On archive creation or appending tarlz archives the files specified, but -removes from member names any leading and trailing slashes and any filename +removes from member names any leading and trailing slashes and any file name prefixes containing a @samp{..} component. On extraction, leading and trailing slashes are also removed from member names, and archive members -containing a @samp{..} component in the filename are skipped. Tarlz detects +containing a @samp{..} component in the file name are skipped. Tarlz detects when the archive being created or enlarged is among the files to be dumped, appended or concatenated, and skips it. @@ -179,30 +188,30 @@ Create a new archive from @var{files}. @item -C @var{dir} @itemx --directory=@var{dir} -Change to directory @var{dir}. When creating or appending, the position -of each @samp{-C} option in the command line is significant; it will -change the current working directory for the following @var{files} until -a new @samp{-C} option appears in the command line. When extracting, all -the @samp{-C} options are executed in sequence before starting the -extraction. Listing ignores any @samp{-C} options specified. @var{dir} -is relative to the then current working directory, perhaps changed by a +Change to directory @var{dir}. When creating or appending, the position of +each @samp{-C} option in the command line is significant; it will change the +current working directory for the following @var{files} until a new +@samp{-C} option appears in the command line. When extracting or comparing, +all the @samp{-C} options are executed in sequence before reading the +archive. Listing ignores any @samp{-C} options specified. @var{dir} is +relative to the then current working directory, perhaps changed by a previous @samp{-C} option. Note that a process can only have one current working directory (CWD). Therefore multi-threading can't be used to create an archive if a @samp{-C} -option appears after a relative filename in the command line. +option appears after a relative file name in the command line. @item -d @itemx --diff -Find differences between archive and file system. For each tar member in the -archive, verify that the corresponding file exists and is of the same type -(regular file, directory, etc). Report on standard output the differences -found in type, mode (permissions), owner and group IDs, modification time, -file size, file contents (of regular files), target (of symlinks) and device -number (of block/character special files). +Compare and report differences between archive and file system. For each tar +member in the archive, verify that the corresponding file in the file system +exists and is of the same type (regular file, directory, etc). Report on +standard output the differences found in type, mode (permissions), owner and +group IDs, modification time, file size, file contents (of regular files), +target (of symlinks) and device number (of block/character special files). As tarlz removes leading slashes from member names, the @samp{-C} option may -be used in combination with @samp{--diff} when absolute filenames were used +be used in combination with @samp{--diff} when absolute file names were used on archive creation: @w{@samp{tarlz -C / -d}}. Alternatively, tarlz may be run from the root directory to perform the comparison. @@ -213,16 +222,22 @@ useful when comparing an @samp{--anonymous} archive. @item --delete Delete the specified files and directories from an archive in place. It currently can delete only from uncompressed archives and from archives with -individually compressed files (@samp{--no-solid} archives). To delete a +individually compressed files (@samp{--no-solid} archives). Note that files +of about @samp{--data-size} or larger are compressed individually even if +@samp{--bsolid} is used, and can therefore be deleted. Tarlz takes care to +not delete a tar member unless it is possible to do so. For example it won't +try to delete a tar member that is not individually compressed. To delete a directory without deleting the files under it, use -@w{@code{tarlz --delete -f foo --exclude='dir/*' dir}}. Deleting in place +@w{@samp{tarlz --delete -f foo --exclude='dir/*' dir}}. Deleting in place may be dangerous. A corrupt archive, a power cut, or an I/O error may cause data loss. @item --exclude=@var{pattern} Exclude files matching a shell pattern like @samp{*.o}. A file is considered -to match if any component of the filename matches. For example, @samp{*.o} -matches @samp{foo.o}, @samp{foo.o/bar} and @samp{foo/bar.o}. +to match if any component of the file name matches. For example, @samp{*.o} +matches @samp{foo.o}, @samp{foo.o/bar} and @samp{foo/bar.o}. If +@var{pattern} contains a @samp{/}, it matches a corresponding @samp{/} in +the file name. For example, @samp{foo/*.o} matches @samp{foo/bar.o}. @item -f @var{archive} @itemx --file=@var{archive} @@ -261,12 +276,13 @@ Append files to the end of an archive. The archive must be a regular be appended to an uncompressed archive, nor vice versa. If the archive is compressed, it must be a multimember lzip file with the two end-of-file blocks plus any zero padding contained in the last lzip member of the -archive. Appending works as follows; first the end-of-file blocks are -removed, then the new members are appended, and finally two new end-of-file -blocks are appended to the archive. If the archive is uncompressed, tarlz -parses and skips tar headers until it finds the end-of-file blocks. Exit -with status 0 without modifying the archive if no @var{files} have been -specified. +archive. It is possible to append files to an archive with a different +compression granularity. Appending works as follows; first the end-of-file +blocks are removed, then the new members are appended, and finally two new +end-of-file blocks are appended to the archive. If the archive is +uncompressed, tarlz parses and skips tar headers until it finds the +end-of-file blocks. Exit with status 0 without modifying the archive if no +@var{files} have been specified. @item -t @itemx --list @@ -282,7 +298,7 @@ Verbosely list files processed. Extract files from an archive. If @var{files} are given, extract only the @var{files} given. Else extract all the files in the archive. To extract a directory without extracting the files under it, use -@w{@code{tarlz -xf foo --exclude='dir/*' dir}}. +@w{@samp{tarlz -xf foo --exclude='dir/*' dir}}. @item -0 .. -9 Set the compression level for @samp{--create} and @samp{--append}. The @@ -326,7 +342,7 @@ compressed data block must contain an integer number of tar members. Block compression is the default because it improves compression ratio for archives with many files smaller than the block size. This option allows tarlz revert to default behavior if, for example, it is invoked through an -alias like @code{tar='tarlz --solid'}. @xref{--data-size}, to set the target +alias like @samp{tar='tarlz --solid'}. @xref{--data-size}, to set the target block size. @item --dsolid @@ -374,7 +390,7 @@ When this option is used, tarlz detects any corruption in the extended records (only limited by CRC collisions). But note that a corrupt @samp{GNU.crc32} keyword, for example @samp{GNU.crc33}, is reported as a missing CRC instead of as a corrupt record. This misleading -@samp{Missing CRC} message is the consequence of a flaw in the posix pax +@samp{Missing CRC} message is the consequence of a flaw in the POSIX pax format; i.e., the lack of a mandatory check sequence in the extended records. @xref{crc32}. @@ -400,6 +416,22 @@ invalid input file, 3 for an internal consistency error (eg, bug) which caused tarlz to panic. +@node Portable character set +@chapter POSIX portable filename character set +@cindex portable character set + +The set of characters from which portable file names are constructed. + +@example +A B C D E F G H I J K L M N O P Q R S T U V W X Y Z +a b c d e f g h i j k l m n o p q r s t u v w x y z +0 1 2 3 4 5 6 7 8 9 . _ - +@end example + +The last three characters are the period, underscore, and hyphen-minus +characters, respectively. + + @node File format @chapter File format @cindex file format @@ -426,7 +458,7 @@ A tar.lz file consists of a series of lzip members (compressed data sets). The members simply appear one after another in the file, with no additional information before, between, or after them. -Each lzip member contains one or more tar members in a simplified posix +Each lzip member contains one or more tar members in a simplified POSIX pax interchange format. The only pax typeflag value supported by tarlz (in addition to the typeflag values defined by the ustar format) is @samp{x}. The pax format is an extension on top of the ustar format that @@ -506,7 +538,7 @@ extraction. @xref{flawed-compat}. The pax extended header data consists of one or more records, each of them constructed as follows:@* -@code{"%d %s=%s\n", <length>, <keyword>, <value>} +@samp{"%d %s=%s\n", <length>, <keyword>, <value>} The <length>, <blank>, <keyword>, <equals-sign>, and <newline> in the record must be limited to the portable character set. The <length> field @@ -577,11 +609,11 @@ shown in the following table. All lengths and offsets are in decimal. All characters in the header block are coded using the ISO/IEC 646:1991 (ASCII) standard, except in fields storing names for files, users, and -groups. For maximum portability between implementations, names should -only contain characters from the portable filename character set. But if -an implementation supports the use of characters outside of @samp{/} and -the portable filename character set in names for files, users, and -groups, tarlz will use the byte values in these names unmodified. +groups. For maximum portability between implementations, names should only +contain characters from the portable character set. But if an implementation +supports the use of characters outside of @samp{/} and the portable +character set in names for files, users, and groups, tarlz will use the byte +values in these names unmodified. The fields name, linkname, and prefix are null-terminated character strings except when all characters in the array contain non-null @@ -679,32 +711,39 @@ ustar by not requiring a terminating null character. @chapter The reasons for the differences with pax @cindex Amendments to pax format -Tarlz is meant to reliably detect invalid or corrupt metadata during -decoding, and to create safe archives where corrupt metadata can be reliably -detected. In order to achieve these goals, tarlz makes some changes to the -variant of the pax format that it uses. This chapter describes these changes -and the concrete reasons to implement them. +Tarlz creates safe archives that allow the reliable detection of invalid or +corrupt metadata during decoding even when the integrity checking of lzip +can't be used because the lzip members are only decompressed partially, as +it happens in parallel @samp{--list} and @samp{--extract}. In order to +achieve this goal, tarlz makes some changes to the variant of the pax format +that it uses. This chapter describes these changes and the concrete reasons +to implement them. @sp 1 @anchor{crc32} @section Add a CRC of the extended records -The posix pax format has a serious flaw. The metadata stored in pax extended +The POSIX pax format has a serious flaw. The metadata stored in pax extended records are not protected by any kind of check sequence. Corruption in a -long filename may cause the extraction of the file in the wrong place +long file name may cause the extraction of the file in the wrong place without warning. Corruption in a large file size may cause the truncation of the file or the appending of garbage to the file, both followed by a spurious warning about a corrupt header far from the place of the undetected corruption. -Metadata like filename and file size must be always protected in an archive +Metadata like file name and file size must be always protected in an archive format because of the adverse effects of undetected corruption in them, potentially much worse that undetected corruption in the data. Even more so in the case of pax because the amount of metadata it stores is potentially large, making undetected corruption more probable. -Because of the above, tarlz protects the extended records with a CRC in -a way compatible with standard tar tools. @xref{key_crc32}. +Headers and metadata must be protected separately from data because the +integrity checking of lzip may not be able to detect the corruption before +the metadata has been used, for example, to create a new file in the wrong +place. + +Because of the above, tarlz protects the extended records with a CRC in a +way compatible with standard tar tools. @xref{key_crc32}. @sp 1 @anchor{flawed-compat} @@ -714,12 +753,12 @@ In order to allow the extraction of pax archives by a tar utility conforming to the POSIX-2:1993 standard, POSIX.1-2008 recommends selecting extended header field values that allow such tar to create a regular file containing the extended header records as data. This approach is broken because if the -extended header is needed because of a long filename, the name and prefix +extended header is needed because of a long file name, the name and prefix fields will be unable to contain the full pathname of the file. Therefore the files corresponding to both the extended header and the overridden ustar -header will be extracted using truncated filenames, perhaps overwriting +header will be extracted using truncated file names, perhaps overwriting existing files or directories. It may be a security risk to extract a file -with a truncated filename. +with a truncated file name. To avoid this problem, tarlz writes extended headers with all fields zeroed except size, chksum, typeflag, magic and version. This prevents old tar @@ -729,8 +768,8 @@ extended records. If an extended header is required for any reason (for example a file size larger than @w{8 GiB} or a link name longer than 100 bytes), tarlz moves the -filename also to the extended header to prevent an ustar tool from trying to -extract the file or link. This also makes easier during parallel decoding +file name also to the extended header to prevent an ustar tool from trying +to extract the file or link. This also makes easier during parallel decoding the detection of a tar member split between two lzip members at the boundary between the extended header and the ustar header. @@ -738,10 +777,11 @@ between the extended header and the ustar header. @section As simple as possible (but not simpler) The tarlz format is mainly ustar. Extended pax headers are used only when -needed because the length of a filename or link name, or the size of a file +needed because the length of a file name or link name, or the size of a file exceed the limits of the ustar format. Adding extended headers to each member just to record subsecond timestamps seems wasteful for a backup -format. +format. Moreover, minimizing the overhead may help recovering the archive +with lziprecover in case of corruption. Global pax headers are tolerated, but not supported; they are parsed and ignored. Some operations may not behave as expected if the archive contains @@ -759,6 +799,7 @@ be adjusted with a command line option in the future. @node Multi-threaded tar @chapter Limitations of parallel tar decoding +@cindex parallel tar decoding Safely decoding an arbitrary tar archive in parallel is impossible. For example, if a tar archive containing another tar archive is decoded starting |