path: root/doc/tarlz.info

This is tarlz.info, produced by makeinfo version 4.13+ from tarlz.texi.

INFO-DIR-SECTION Data Compression
START-INFO-DIR-ENTRY
* Tarlz: (tarlz).               Archiver with multimember lzip compression
END-INFO-DIR-ENTRY


File: tarlz.info,  Node: Top,  Next: Introduction,  Up: (dir)

Tarlz Manual
************

This manual is for Tarlz (version 0.22, 5 January 2022).

* Menu:

* Introduction::              Purpose and features of tarlz
* Invoking tarlz::            Command line interface
* Portable character set::    POSIX portable filename character set
* File format::               Detailed format of the compressed archive
* Amendments to pax format::  The reasons for the differences with pax
* Program design::            Internal structure of tarlz
* Multi-threaded decoding::   Limitations of parallel tar decoding
* Minimum archive sizes::     Sizes required for full multi-threaded speed
* Examples::                  A small tutorial with examples
* Problems::                  Reporting bugs
* Concept index::             Index of concepts


   Copyright (C) 2013-2022 Antonio Diaz Diaz.

   This manual is free documentation: you have unlimited permission to copy,
distribute, and modify it.


File: tarlz.info,  Node: Introduction,  Next: Invoking tarlz,  Prev: Top,  Up: Top

1 Introduction
**************

Tarlz is a massively parallel (multi-threaded) combined implementation of
the tar archiver and the lzip compressor. Tarlz uses the compression
library lzlib.

   Tarlz creates tar archives using a simplified and safer variant of the
POSIX pax format compressed in lzip format, keeping the alignment between
tar members and lzip members. The resulting multimember tar.lz archive is
fully backward compatible with standard tar tools like GNU tar, which treat
it like any other tar.lz archive. Tarlz can append files to the end of such
compressed archives.

   Keeping the alignment between tar members and lzip members has two
advantages. It adds an indexed lzip layer on top of the tar archive, making
it possible to decode the archive safely in parallel. It also minimizes the
amount of data lost in case of corruption. Compressing a tar archive with
plzip may even double the amount of files lost for each lzip member damaged
because it does not keep the members aligned.

   Tarlz can create tar archives with five levels of compression
granularity: per file (--no-solid), per block (--bsolid, default), per
directory (--dsolid), appendable solid (--asolid), and solid (--solid). It
can also create uncompressed tar archives.

Of course, compressing each file (or each directory) individually can't
achieve a compression ratio as high as compressing solidly the whole tar
archive, but it has the following advantages:

   * The resulting multimember tar.lz archive can be decompressed in
     parallel, multiplying the decompression speed.

   * New members can be appended to the archive (by removing the EOF
     member), and unwanted members can be deleted from the archive. Just
     like an uncompressed tar archive.

   * It is a safe POSIX-style backup format. In case of corruption, tarlz
     can extract all the undamaged members from the tar.lz archive,
     skipping over the damaged members, just like the standard
     (uncompressed) tar. Moreover, the option '--keep-damaged' can be used
     to recover as much data as possible from each damaged member, and
     lziprecover can be used to recover some of the damaged members.

   * A multimember tar.lz archive is usually smaller than the corresponding
     solidly compressed tar.gz archive, except when individually
     compressing files smaller than about 32 KiB.

   Tarlz protects the extended records with a Cyclic Redundancy Check (CRC)
in a way compatible with standard tar tools. *Note crc32::.

   Tarlz does not understand other tar formats like 'gnu', 'oldgnu', 'star'
or 'v7'. The command 'tarlz -tf archive.tar.lz > /dev/null' can be used to
verify that the format of the archive is compatible with tarlz.


File: tarlz.info,  Node: Invoking tarlz,  Next: Portable character set,  Prev: Introduction,  Up: Top

2 Invoking tarlz
****************

The format for running tarlz is:

     tarlz [OPTIONS] [FILES]

All operations except '--concatenate' and '--compress' operate on whole
trees if any FILE is a directory. All operations except '--compress'
overwrite output files without warning.

   On archive creation or appending tarlz archives the files specified, but
removes from member names any leading and trailing slashes and any file name
prefixes containing a '..' component. On extraction, leading and trailing
slashes are also removed from member names, and archive members containing
a '..' component in the file name are skipped. Tarlz detects when the
archive being created or enlarged is among the files to be dumped, appended
or concatenated, and skips it.

   On extraction and listing, tarlz removes leading './' strings from
member names in the archive or given in the command line, so that
'tarlz -xf foo ./bar baz' extracts members 'bar' and './baz' from archive
'foo'.

   If several compression levels or '--*solid' options are given, the last
setting is used. For example '-9 --solid --uncompressed -1' is equivalent
to '-1 --solid'.

   tarlz supports the following options: *Note Argument syntax:
(arg_parser)Argument syntax.

'--help'
     Print an informative help message describing the options and exit.

'-V'
'--version'
     Print the version number of tarlz on the standard output and exit.
     This version number should be included in all bug reports.

'-A'
'--concatenate'
     Append one or more archives to the end of an archive. If no archive is
     specified with the option '-f', the input archives are concatenated to
     standard output. All the archives involved must be regular (seekable)
     files, and must be either all compressed or all uncompressed.
     Compressed and uncompressed archives can't be mixed. Compressed
     archives must be multimember lzip files with the two end-of-file
     blocks plus any zero padding contained in the last lzip member of each
     archive. The intermediate end-of-file blocks are removed as each new
     archive is concatenated. If the archive is uncompressed, tarlz parses
     and skips tar headers until it finds the end-of-file blocks. Exit with
     status 0 without modifying the archive if no FILES have been specified.

'-B BYTES'
'--data-size=BYTES'
     Set target size of input data blocks for the option '--bsolid'. *Note
     --bsolid::. Valid values range from 8 KiB to 1 GiB. Default value is
     two times the dictionary size, except for option '-0' where it
     defaults to 1 MiB. *Note Minimum archive sizes::.

'-c'
'--create'
     Create a new archive from FILES.

'-C DIR'
'--directory=DIR'
     Change to directory DIR. When creating or appending, the position of
     each '-C' option in the command line is significant; it will change the
     current working directory for the following FILES until a new '-C'
     option appears in the command line. When extracting or comparing, all
     the '-C' options are executed in sequence before reading the archive.
     Listing ignores any '-C' options specified. DIR is relative to the
     then current working directory, perhaps changed by a previous '-C'
     option.

     Note that a process can only have one current working directory (CWD).
     Therefore multi-threading can't be used to create an archive if a '-C'
     option appears after a relative file name in the command line.

'-d'
'--diff'
     Compare and report differences between archive and file system. For
     each tar member in the archive, verify that the corresponding file in
     the file system exists and is of the same type (regular file,
     directory, etc). Report on standard output the differences found in
     type, mode (permissions), owner and group IDs, modification time, file
     size, file contents (of regular files), target (of symlinks) and
     device number (of block/character special files).

     As tarlz removes leading slashes from member names, the option '-C' may
     be used in combination with '--diff' when absolute file names were used
     on archive creation: 'tarlz -C / -d'. Alternatively, tarlz may be run
     from the root directory to perform the comparison.

'--ignore-ids'
     Make '--diff' ignore differences in owner and group IDs. This option is
     useful when comparing an '--anonymous' archive.

'--delete'
     Delete files and directories from an archive in place. It currently can
     delete only from uncompressed archives and from archives with files
     compressed individually ('--no-solid' archives). Note that files of
     about '--data-size' or larger are compressed individually even if
     '--bsolid' is used, and can therefore be deleted. Tarlz takes care to
     not delete a tar member unless it is possible to do so. For example it
     won't try to delete a tar member that is not compressed individually.
     Even in the case of finding a corrupt member after having deleted some
     member(s), tarlz stops and copies the rest of the file as soon as
     corruption is found, leaving it just as corrupt as it was, but not
     worse.

     To delete a directory without deleting the files under it, use
     'tarlz --delete -f foo --exclude='dir/*' dir'. Deleting in place may
     be dangerous. A corrupt archive, a power cut, or an I/O error may cause
     data loss.

'--exclude=PATTERN'
     Exclude files matching a shell pattern like '*.o'. A file is considered
     to match if any component of the file name matches. For example, '*.o'
     matches 'foo.o', 'foo.o/bar' and 'foo/bar.o'. If PATTERN contains a
     '/', it matches a corresponding '/' in the file name. For example,
     'foo/*.o' matches 'foo/bar.o'.

'-f ARCHIVE'
'--file=ARCHIVE'
     Use archive file ARCHIVE. A hyphen '-' used as an ARCHIVE argument
     reads from standard input or writes to standard output.

'-h'
'--dereference'
     Follow symbolic links during archive creation, appending or comparison.
     Archive or compare the files they point to instead of the links
     themselves.

'--mtime=DATE'
     When creating or appending, use DATE as the modification time for
     files added to the archive instead of their actual modification times.
     The value of DATE may be either '@' followed by the number of seconds
     since the epoch, or a date in format 'YYYY-MM-DD HH:MM:SS', or the
     name of an existing file starting with '.' or '/'. In the latter case,
     the modification time of that file is used.

'-n N'
'--threads=N'
     Set the number of (de)compression threads, overriding the system's
     default. Valid values range from 0 to "as many as your system can
     support". A value of 0 disables threads entirely. If this option is
     not used, tarlz tries to detect the number of processors in the system
     and use it as default value. 'tarlz --help' shows the system's default
     value. See the note about multi-threaded archive creation in the
     option '-C' above.

     Note that the number of usable threads is limited during compression to
     ceil( uncompressed_size / data_size ) (*note Minimum archive sizes::),
     and during decompression to the number of lzip members in the tar.lz
     archive, which you can find by running 'lzip -lv archive.tar.lz'.

'-o FILE'
'--output=FILE'
     Write the compressed output to FILE. '-o -' writes the compressed
     output to standard output. Currently '--output' only works with
     '--compress'.

'-p'
'--preserve-permissions'
     On extraction, set file permissions as they appear in the archive.
     This is the default behavior when tarlz is run by the superuser. The
     default for other users is to subtract the umask of the user running
     tarlz from the permissions specified in the archive.

'-q'
'--quiet'
     Quiet operation. Suppress all messages.

'-r'
'--append'
     Append files to the end of an archive. The archive must be a regular
     (seekable) file either compressed or uncompressed. Compressed members
     can't be appended to an uncompressed archive, nor vice versa. If the
     archive is compressed, it must be a multimember lzip file with the two
     end-of-file blocks plus any zero padding contained in the last lzip
     member of the archive. It is possible to append files to an archive
     with a different compression granularity. Appending works as follows;
     first the end-of-file blocks are removed, then the new members are
     appended, and finally two new end-of-file blocks are appended to the
     archive. If the archive is uncompressed, tarlz parses and skips tar
     headers until it finds the end-of-file blocks. Exit with status 0
     without modifying the archive if no FILES have been specified.

'-t'
'--list'
     List the contents of an archive. If FILES are given, list only the
     FILES given.

'-v'
'--verbose'
     Verbosely list files processed. Further -v's (up to 4) increase the
     verbosity level.

'-x'
'--extract'
     Extract files from an archive. If FILES are given, extract only the
     FILES given. Else extract all the files in the archive. To extract a
     directory without extracting the files under it, use
     'tarlz -xf foo --exclude='dir/*' dir'. Tarlz will not make any special
     effort to extract a file over an incompatible type of file. For
     example, extracting a link over a directory will usually fail.
     (Principle of least surprise).

'-z'
'--compress'
     Compress existing POSIX tar archives aligning the lzip members to the
     tar members with choice of granularity (--bsolid by default, --dsolid
     works like --asolid). The input archives are kept unchanged. Existing
     compressed archives are not overwritten. A hyphen '-' used as the name
     of an input archive reads from standard input and writes to standard
     output (unless the option '--output' is used). Tarlz can be used as
     compressor for GNU tar using a command like
     'tar -c -Hustar foo | tarlz -z -o foo.tar.lz'. Note that tarlz only
     works reliably on archives without global headers, or with global
     headers whose content can be ignored.

     The compression is reversible, including any garbage present after the
     EOF blocks. Tarlz stops parsing after the first EOF block is found,
     and then compresses the rest of the archive. Unless solid compression
     is requested, the EOF blocks are compressed in a lzip member separated
     from the preceding members and from any non-zero garbage following the
     EOF blocks. '--compress' implies plzip argument style, not tar style.
     Each input archive is compressed to a file with the extension '.lz'
     added unless the option '--output' is used. When '--output' is used,
     only one input archive can be specified. '-f' can't be used with
     '--compress'.

'-0 .. -9'
     Set the compression level for '--create', '--append', and
     '--compress'. The default compression level is '-6'. Like lzip, tarlz
     also minimizes the dictionary size of the lzip members it creates,
     reducing the amount of memory required for decompression.

     Level   Dictionary size   Match length limit
     -0      64 KiB            16 bytes
     -1      1 MiB             5 bytes
     -2      1.5 MiB           6 bytes
     -3      2 MiB             8 bytes
     -4      3 MiB             12 bytes
     -5      4 MiB             20 bytes
     -6      8 MiB             36 bytes
     -7      16 MiB            68 bytes
     -8      24 MiB            132 bytes
     -9      32 MiB            273 bytes

'--uncompressed'
     With '--create', don't compress the tar archive created. Create an
     uncompressed tar archive instead. With '--append', don't compress the
     new members appended to the tar archive. Compressed members can't be
     appended to an uncompressed archive, nor vice versa.

'--asolid'
     When creating or appending to a compressed archive, use appendable
     solid compression. All the files being added to the archive are
     compressed into a single lzip member, but the end-of-file blocks are
     compressed into a separate lzip member. This creates a solidly
     compressed appendable archive. Solid archives can't be created nor
     decoded in parallel.

'--bsolid'
     When creating or appending to a compressed archive, use block
     compression. Tar members are compressed together in a lzip member
     until they approximate a target uncompressed size. The size can't be
     exact because each solidly compressed data block must contain an
     integer number of tar members. Block compression is the default
     because it improves compression ratio for archives with many files
     smaller than the block size. This option allows tarlz revert to
     default behavior if, for example, it is invoked through an alias like
     'tar='tarlz --solid''. *Note --data-size::, to set the target block
     size.

'--dsolid'
     When creating or appending to a compressed archive, compress each file
     specified in the command line separately in its own lzip member, and
     use solid compression for each directory specified in the command
     line. The end-of-file blocks are compressed into a separate lzip
     member. This creates a compressed appendable archive with a separate
     lzip member for each file or top-level directory specified.

'--no-solid'
     When creating or appending to a compressed archive, compress each file
     separately in its own lzip member. The end-of-file blocks are
     compressed into a separate lzip member. This creates a compressed
     appendable archive with a lzip member for each file.

'--solid'
     When creating or appending to a compressed archive, use solid
     compression. The files being added to the archive, along with the
     end-of-file blocks, are compressed into a single lzip member. The
     resulting archive is not appendable. No more files can be later
     appended to the archive. Solid archives can't be created nor decoded
     in parallel.

'--anonymous'
     Equivalent to '--owner=root --group=root'.

'--owner=OWNER'
     When creating or appending, use OWNER for files added to the archive.
     If OWNER is not a valid user name, it is decoded as a decimal numeric
     user ID.

'--group=GROUP'
     When creating or appending, use GROUP for files added to the archive.
     If GROUP is not a valid group name, it is decoded as a decimal numeric
     group ID.

'--keep-damaged'
     Don't delete partially extracted files. If a decompression error
     happens while extracting a file, keep the partial data extracted. Use
     this option to recover as much data as possible from each damaged
     member. It is recommended to run tarlz in single-threaded mode
     (-threads=0) when using this option.

'--missing-crc'
     Exit with error status 2 if the CRC of the extended records is missing.
     When this option is used, tarlz detects any corruption in the extended
     records (only limited by CRC collisions). But note that a corrupt
     'GNU.crc32' keyword, for example 'GNU.crc33', is reported as a missing
     CRC instead of as a corrupt record. This misleading 'Missing CRC'
     message is the consequence of a flaw in the POSIX pax format; i.e.,
     the lack of a mandatory check sequence in the extended records. *Note
     crc32::.

'--out-slots=N'
     Number of 1 MiB output packets buffered per worker thread during
     multi-threaded creation or appending to compressed archives.
     Increasing the number of packets may increase compression speed if the
     files being archived are larger than 64 MiB compressed, but requires
     more memory. Valid values range from 1 to 1024. The default value is
     64.

'--check-lib'
     Compare the version of lzlib used to compile tarlz with the version
     actually being used at run time and exit. Report any differences
     found. Exit with error status 1 if differences are found. A mismatch
     may indicate that lzlib is not correctly installed or that a different
     version of lzlib has been installed after compiling tarlz. Exit with
     error status 2 if LZ_API_VERSION and LZ_version_string don't match.
     'tarlz -v --check-lib' shows the version of lzlib being used and the
     value of LZ_API_VERSION (if defined). *Note Library version:
     (lzlib)Library version.

'--warn-newer'
     During archive creation, warn if any file being archived has a
     modification time newer than the archive creation time. This option
     may slow archive creation somewhat because it makes an extra call to
     'stat' after archiving each file, but it guarantees that file contents
     were not modified during the creation of the archive. Note that the
     file must be at least one second newer than the archive for it to be
     detected as newer.


   Exit status: 0 for a normal exit, 1 for environmental problems (file not
found, files differ, invalid flags, I/O errors, etc), 2 to indicate a
corrupt or invalid input file, 3 for an internal consistency error (e.g.
bug) which caused tarlz to panic.


File: tarlz.info,  Node: Portable character set,  Next: File format,  Prev: Invoking tarlz,  Up: Top

3 POSIX portable filename character set
***************************************

The set of characters from which portable file names are constructed.

     A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
     a b c d e f g h i j k l m n o p q r s t u v w x y z
     0 1 2 3 4 5 6 7 8 9 . _ -

   The last three characters are the period, underscore, and hyphen-minus
characters, respectively.

   File names are identifiers. Therefore, archiving works better when file
names use only the portable character set without spaces added. Unicode is
for human consumption. It should be avoided in computing environments,
specially in file names. *Note why not Unicode: (moe)why not Unicode.


File: tarlz.info,  Node: File format,  Next: Amendments to pax format,  Prev: Portable character set,  Up: Top

4 File format
*************

In the diagram below, a box like this:

+---+
|   | <-- the vertical bars might be missing
+---+

   represents one byte; a box like this:

+==============+
|              |
+==============+

   represents a variable number of bytes or a fixed but large number of
bytes (for example 512).


   A tar.lz file consists of a series of lzip members (compressed data
sets). The members simply appear one after another in the file, with no
additional information before, between, or after them.

   Each lzip member contains one or more tar members in a simplified POSIX
pax interchange format. The only pax typeflag value supported by tarlz (in
addition to the typeflag values defined by the ustar format) is 'x'. The
pax format is an extension on top of the ustar format that removes the size
limitations of the ustar format.

   Each tar member contains one file archived, and is represented by the
following sequence:

   * An optional extended header block with extended header records. This
     header block is of the form described in pax header block, with a
     typeflag value of 'x'. The extended header records are included as the
     data for this header block.

   * A header block in ustar format that describes the file. Any fields
     defined in the preceding optional extended header records override the
     associated fields in this header block for this file.

   * Zero or more blocks that contain the contents of the file.

   Each tar member must be contiguously stored in a lzip member for the
parallel decoding operations like '--list' to work. If any tar member is
split over two or more lzip members, the archive must be decoded
sequentially. *Note Multi-threaded decoding::.

   At the end of the archive file there are two 512-byte blocks filled with
binary zeros, interpreted as an end-of-archive indicator. These EOF blocks
are either compressed in a separate lzip member or compressed along with
the tar members contained in the last lzip member.

   The diagram below shows the correspondence between each tar member
(formed by one or two headers plus optional data) in the tar archive and
each lzip member in the resulting multimember tar.lz archive, when per file
compression is used: *Note File format: (lzip)File format.

tar
+========+======+=================+===============+========+======+========+
| header | data | extended header | extended data | header | data |   EOF  |
+========+======+=================+===============+========+======+========+

tar.lz
+===============+=================================================+========+
|     member    |                      member                     | member |
+===============+=================================================+========+


4.1 Pax header block
====================

The pax header block is identical to the ustar header block described below
except that the typeflag has the value 'x' (extended). The field 'size' is
the size of the extended header data in bytes. Most other fields in the pax
header block are zeroed on archive creation to prevent trouble if the
archive is read by an ustar tool, and are ignored by tarlz on archive
extraction. *Note flawed-compat::.

   The pax extended header data consists of one or more records, each of
them constructed as follows:
'"%d %s=%s\n", <length>, <keyword>, <value>'

   The fields <length> and <keyword> in the record must be limited to the
portable character set (*note Portable character set::). The field <length>
contains the decimal length of the record in bytes, including the trailing
newline. The field <value> is stored as-is, without conversion to UTF-8 nor
any other transformation. The fields are separated by the ASCII characters
space, equal-sign, and newline.

   These are the <keyword> values currently supported by tarlz:

'linkpath'
     The pathname of a link being created to another file, of any type,
     previously archived. This record overrides the field 'linkname' in the
     following ustar header block. The following ustar header block
     determines the type of link created. If typeflag of the following
     header block is 1, it will be a hard link. If typeflag is 2, it will
     be a symbolic link and the linkpath value will be used as the contents
     of the symbolic link.

'path'
     The pathname of the following file. This record overrides the fields
     'name' and 'prefix' in the following ustar header block.

'size'
     The size of the file in bytes, expressed as a decimal number using
     digits from the ISO/IEC 646:1991 (ASCII) standard. This record
     overrides the size field in the following ustar header block. The size
     record is used only for files with a size value greater than
     8_589_934_591 (octal 77777777777). This is 2^33 bytes or larger.

'GNU.crc32'
     CRC32-C (Castagnoli) of the extended header data excluding the 8 bytes
     representing the CRC <value> itself. The <value> is represented as 8
     hexadecimal digits in big endian order, '22 GNU.crc32=00000000\n'. The
     keyword of the CRC record is protected by the CRC to guarante that
     corruption is always detected when using '--missing-crc' (except in
     case of CRC collision). A CRC was chosen because a checksum is too
     weak for a potentially large list of variable sized records. A
     checksum can't detect simple errors like the swapping of two bytes.


   At verbosity level 1 or higher tarlz prints a diagnostic for each unknown
extended header keyword found in an archive, once per keyword.


4.2 Ustar header block
======================

The ustar header block has a length of 512 bytes and is structured as shown
in the following table. All lengths and offsets are in decimal.

Field Name   Offset   Length (in bytes)
name         0        100
mode         100      8
uid          108      8
gid          116      8
size         124      12
mtime        136      12
chksum       148      8
typeflag     156      1
linkname     157      100
magic        257      6
version      263      2
uname        265      32
gname        297      32
devmajor     329      8
devminor     337      8
prefix       345      155

   All characters in the header block are coded using the ISO/IEC 646:1991
(ASCII) standard, except in fields storing names for files, users, and
groups. For maximum portability between implementations, names should only
contain characters from the portable character set (*note Portable
character set::), but if an implementation supports the use of characters
outside of '/' and the portable character set in names for files, users,
and groups, tarlz will use the byte values in these names unmodified.

   The fields 'name', 'linkname', and 'prefix' are null-terminated
character strings except when all characters in the array contain non-null
characters including the last character.

   The fields 'prefix' and 'name' produce the pathname of the file. A new
pathname is formed, if prefix is not an empty string (its first character
is not null), by concatenating prefix (up to the first null character), a
slash character, and name; otherwise, name is used alone. In either case,
name is terminated at the first null character. If prefix begins with a
null character, it is ignored. In this manner, pathnames of at most 256
characters can be supported. If a pathname does not fit in the space
provided, an extended record is used to store the pathname.

   The field 'linkname' does not use the prefix to produce a pathname. If
the linkname does not fit in the 100 characters provided, an extended record
is used to store the linkname.

   The field 'mode' provides 12 access permission bits. The following table
shows the symbolic name of each bit and its octal value:

Bit Name   Value   Bit Name   Value   Bit Name   Value
---------------------------------------------------
S_ISUID    04000   S_ISGID    02000   S_ISVTX    01000
S_IRUSR    00400   S_IWUSR    00200   S_IXUSR    00100
S_IRGRP    00040   S_IWGRP    00020   S_IXGRP    00010
S_IROTH    00004   S_IWOTH    00002   S_IXOTH    00001

   The fields 'uid' and 'gid' are the user and group IDs of the owner and
group of the file, respectively.

   The field 'size' contains the octal representation of the size of the
file in bytes. If the field 'typeflag' specifies a file of type '0'
(regular file) or '7' (high performance regular file), the number of logical
records following the header is (size / 512) rounded to the next integer.
For all other values of typeflag, tarlz either sets the size field to 0 or
ignores it, and does not store or expect any logical records following the
header. If the file size is larger than 8_589_934_591 bytes
(octal 77777777777), an extended record is used to store the file size.

   The field 'mtime' contains the octal representation of the modification
time of the file at the time it was archived, obtained from the function
'stat'.

   The field 'chksum' contains the octal representation of the value of the
simple sum of all bytes in the header logical record. Each byte in the
header is treated as an unsigned value. When calculating the checksum, the
chksum field is treated as if it were all space characters.

   The field 'typeflag' contains a single character specifying the type of
file archived:

''0''
     Regular file.

''1''
     Hard link to another file, of any type, previously archived.

''2''
     Symbolic link.

''3', '4''
     Character special file and block special file respectively. In this
     case the fields 'devmajor' and 'devminor' contain information defining
     the device in unspecified format.

''5''
     Directory.

''6''
     FIFO special file.

''7''
     Reserved to represent a file to which an implementation has associated
     some high-performance attribute. Tarlz treats this type of file as a
     regular file (type 0).


   The field 'magic' contains the ASCII null-terminated string "ustar". The
field 'version' contains the characters "00" (0x30,0x30). The fields
'uname' and 'gname' are null-terminated character strings except when all
characters in the array contain non-null characters including the last
character. Each numeric field contains a leading space- or zero-filled,
optionally null-terminated octal number using digits from the ISO/IEC
646:1991 (ASCII) standard. Tarlz is able to decode numeric fields 1 byte
longer than standard ustar by not requiring a terminating null character.


File: tarlz.info,  Node: Amendments to pax format,  Next: Program design,  Prev: File format,  Up: Top

5 The reasons for the differences with pax
******************************************

Tarlz creates safe archives that allow the reliable detection of invalid or
corrupt metadata during decoding even when the integrity checking of lzip
can't be used because the lzip members are only decompressed partially, as
it happens in parallel '--diff', '--list', and '--extract'. In order to
achieve this goal, tarlz makes some changes to the variant of the pax
format that it uses. This chapter describes these changes and the concrete
reasons to implement them.


5.1 Add a CRC of the extended records
=====================================

The POSIX pax format has a serious flaw. The metadata stored in pax extended
records are not protected by any kind of check sequence. Corruption in a
long file name may cause the extraction of the file in the wrong place
without warning. Corruption in a large file size may cause the truncation of
the file or the appending of garbage to the file, both followed by a
spurious warning about a corrupt header far from the place of the undetected
corruption.

   Metadata like file name and file size must be always protected in an
archive format because of the adverse effects of undetected corruption in
them, potentially much worse that undetected corruption in the data. Even
more so in the case of pax because the amount of metadata it stores is
potentially large, making undetected corruption and archiver misbehavior
more probable.

   Headers and metadata must be protected separately from data because the
integrity checking of lzip may not be able to detect the corruption before
the metadata has been used, for example, to create a new file in the wrong
place.

   Because of the above, tarlz protects the extended records with a Cyclic
Redundancy Check (CRC) in a way compatible with standard tar tools. *Note
key_crc32::.


5.2 Remove flawed backward compatibility
========================================

In order to allow the extraction of pax archives by a tar utility conforming
to the POSIX-2:1993 standard, POSIX.1-2008 recommends selecting extended
header field values that allow such tar to create a regular file containing
the extended header records as data. This approach is broken because if the
extended header is needed because of a long file name, the fields 'prefix'
and 'name' will be unable to contain the full pathname of the file.
Therefore the files corresponding to both the extended header and the
overridden ustar header will be extracted using truncated file names,
perhaps overwriting existing files or directories. It may be a security risk
to extract a file with a truncated file name.

   To avoid this problem, tarlz writes extended headers with all fields
zeroed except size, chksum, typeflag, magic and version. This prevents old
tar programs from extracting the extended records as a file in the wrong
place. Tarlz also sets to zero those fields of the ustar header overridden
by extended records. Finally, tarlz skips members without name when decoding
except when listing. This is needed to detect certain format violations
during parallel extraction.

   If an extended header is required for any reason (for example a file size
larger than 8 GiB or a link name longer than 100 bytes), tarlz moves the
file name also to the extended header to prevent an ustar tool from trying
to extract the file or link. This also makes easier during parallel decoding
the detection of a tar member split between two lzip members at the boundary
between the extended header and the ustar header.


5.3 As simple as possible (but not simpler)
===========================================

The tarlz format is mainly ustar. Extended pax headers are used only when
needed because the length of a file name or link name, or the size of a file
exceed the limits of the ustar format. Adding 1 KiB of extended headers to
each member just to record subsecond timestamps seems wasteful for a backup
format. Moreover, minimizing the overhead may help recovering the archive
with lziprecover in case of corruption.

   Global pax headers are tolerated, but not supported; they are parsed and
ignored. Some operations may not behave as expected if the archive contains
global headers.


5.4 Avoid misconversions to/from UTF-8
======================================

There is no portable way to tell what charset a text string is coded into.
Therefore, tarlz stores all fields representing text strings unmodified,
without conversion to UTF-8 nor any other transformation. This prevents
accidental double UTF-8 conversions. If the need arises this behavior will
be adjusted with a command line option in the future.


File: tarlz.info,  Node: Program design,  Next: Multi-threaded decoding,  Prev: Amendments to pax format,  Up: Top

6 Internal structure of tarlz
*****************************

The parts of tarlz related to sequential processing of the archive are more
or less similar to any other tar and won't be described here. The
interesting parts described here are those related to Multi-threaded
processing.

   The structure of the part of tarlz performing Multi-threaded archive
creation is somewhat similar to that of plzip with the added complication
of the solidity levels. *Note Program design: (plzip)Program design. A
grouper thread and several worker threads are created, acting the main
thread as muxer (multiplexer) thread. A "packet courier" takes care of data
transfers among threads and limits the maximum number of data blocks
(packets) being processed simultaneously.

   The grouper traverses the directory tree, groups together the metadata of
the files to be archived in each lzip member, and distributes them to the
workers. The workers compress the metadata received from the grouper along
with the file data read from the file system. The muxer collects processed
packets from the workers, and writes them to the archive.

.--------.
|    data|---> to each worker below
|        |                    .------------.
| file   |                ,-->| worker   0 |--,
| system |                |   `------------'  |
|        |    .---------. |   .------------.  |   .-------.   .---------.
|metadata|--->| grouper |-+-->| worker   1 |--+-->| muxer |-->| archive |
`--------'    `---------' |   `------------'  |   `-------'   `---------'
                          |        ...        |
                          |   .------------.  |
                          `-->| worker N-1 |--'
                              `------------'

   Decoding an archive is somewhat similar to how plzip decompresses a
regular file to standard output, with the differences that it is not the
data but only messages what is written to stdout/stderr, and that each
worker may access files in the file system either to read them (diff) or
write them (extract). As in plzip, each worker reads members directly from
the archive.

.--------.
| file   |<---> data to/from each worker below
| system |
`--------'      .------------.
            ,-->| worker   0 |--,
            |   `------------'  |
.---------. |   .------------.  |   .-------.   .--------.
| archive |-+-->| worker   1 |--+-->| muxer |-->| stdout |
`---------' |   `------------'  |   `-------'   | stderr |
            |        ...        |               `--------'
            |   .------------.  |
            `-->| worker N-1 |--'
                `------------'

   As misaligned tar.lz archives can't be decoded in parallel, and the
misalignment can't be detected until after decoding has started, a
"mastership request" mechanism has been designed that allows the decoding to
continue instead of signalling an error.

   During parallel decoding, if a worker finds a misalignment, it requests
mastership to decode the rest of the archive. When mastership is requested,
an error_member_id is set, and all subsequently received packets with
member_id > error_member_id are rejected. All workers requesting mastership
are blocked at the request_mastership call until mastership is granted.
Mastership is granted to the delivering worker when its queue is empty to
make sure that all preceding packets have been processed. When mastership is
granted, all packets are deleted and all subsequently received packets not
coming from the master are rejected.

   If a worker can't continue decoding for any cause (for example lack of
memory or finding a split tar member at the beginning of a lzip member), it
requests mastership to print an error and terminate the program. Only if
some other worker requests mastership in a previous lzip member can this
error be avoided.


File: tarlz.info,  Node: Multi-threaded decoding,  Next: Minimum archive sizes,  Prev: Program design,  Up: Top

7 Limitations of parallel tar decoding
**************************************

Safely decoding an arbitrary tar archive in parallel is only possible if one
decodes the headers sequentially first. For example, if a tar archive
containing another tar archive is decoded starting from some position other
than the beginning, there is no way to know if the first header found there
belongs to the outer tar archive or to the inner tar archive. Tar is a
format inherently serial; it was designed for tapes.

   The pax format is even more serial than the ustar format. Two headers
need to be decoded sequentially for each file. The extended header may even
need parsing to reveal something as basic as file size. If a thread decodes
the ustar header skipping the preceding extended header, it may extract a
file of incorrect size at the wrong place. Moreover, a pax archive with
global headers can't be decoded in parallel because each thread can't know
about the global headers decoded by other threads.

   In the case of compressed tar archives, the start of each compressed
block determines one point through which the tar archive can be decoded in
parallel. Therefore, in tar.lz archives the decoding operations can't be
parallelized if the tar members are not aligned with the lzip members. Tar
archives compressed with plzip can't be decoded in parallel because tar and
plzip do not have a way to align both sets of members. Certainly one can
decompress one such archive with a multi-threaded tool like plzip, but the
increase in speed is not as large as it could be because plzip must
serialize the decompressed data and pass them to tar, which decodes them
sequentially, one tar member at a time.

   On the other hand, if the tar.lz archive is created with a tool like
tarlz, which can guarantee the alignment between tar members and lzip
members because it controls both archiving and compression, then the lzip
format becomes an indexed layer on top of the tar archive which makes
possible decoding it safely in parallel.

   Tarlz is able to automatically decode aligned and unaligned multimember
tar.lz archives, keeping backwards compatibility. If tarlz finds a member
misalignment during multi-threaded decoding, it switches to single-threaded
mode and continues decoding the archive.

   If the files in the archive are large, multi-threaded '--list' on a
regular (seekable) tar.lz archive can be hundreds of times faster than
sequential '--list' because, in addition to using several processors, it
only needs to decompress part of each lzip member. See the following
example listing the Silesia corpus on a dual core machine:

     tarlz -9 --no-solid -cf silesia.tar.lz silesia
     time lzip -cd silesia.tar.lz | tar -tf -            (5.032s)
     time plzip -cd silesia.tar.lz | tar -tf -           (3.256s)
     time tarlz -tf silesia.tar.lz                       (0.020s)

   On the other hand, multi-threaded '--list' won't detect corruption in
the tar member data because it only decodes the part of each lzip member
corresponding to the tar member header. This is another reason why the tar
headers must provide their own integrity checking.


7.1 Limitations of multi-threaded extraction
============================================

Multi-threaded extraction may produce different output than single-threaded
extraction in some cases:

   During multi-threaded extraction, several independent processes are
simultaneously reading the archive and creating files in the file system.
The archive is not read sequentially. As a consequence, any error or
weirdness in the archive (like a corrupt member or an EOF block in the
middle of the archive) won't be usually detected until part of the archive
beyond that point has been processed.

   If the archive contains two or more tar members with the same name,
single-threaded extraction extracts the members in the order they appear in
the archive and leaves in the file system the last version of the file. But
multi-threaded extraction may extract the members in any order and leave in
the file system any version of the file nondeterministically. It is
unspecified which of the tar members is extracted.

   If the same file is extracted through several paths (different member
names resolve to the same file in the file system), the result is undefined.
(Probably the resulting file will be mangled).


File: tarlz.info,  Node: Minimum archive sizes,  Next: Examples,  Prev: Multi-threaded decoding,  Up: Top

8 Minimum archive sizes required for multi-threaded block compression
*********************************************************************

When creating or appending to a compressed archive using multi-threaded
block compression, tarlz puts tar members together in blocks and compresses
as many blocks simultaneously as worker threads are chosen, creating a
multimember compressed archive.

   For this to work as expected (and roughly multiply the compression speed
by the number of available processors), the uncompressed archive must be at
least as large as the number of worker threads times the block size (*note
--data-size::). Else some processors will not get any data to compress, and
compression will be proportionally slower. The maximum speed increase
achievable on a given archive is limited by the ratio
(uncompressed_size / data_size). For example, a tarball the size of gcc or
linux will scale up to 10 or 14 processors at level -9.

   The following table shows the minimum uncompressed archive size needed
for full use of N processors at a given compression level, using the default
data size for each level:

Processors   2         4         8         16        64        256
------------------------------------------------------------------
Level                                                          
-0           2 MiB     4 MiB     8 MiB     16 MiB    64 MiB    256 MiB
-1           4 MiB     8 MiB     16 MiB    32 MiB    128 MiB   512 MiB
-2           6 MiB     12 MiB    24 MiB    48 MiB    192 MiB   768 MiB
-3           8 MiB     16 MiB    32 MiB    64 MiB    256 MiB   1 GiB
-4           12 MiB    24 MiB    48 MiB    96 MiB    384 MiB   1.5 GiB
-5           16 MiB    32 MiB    64 MiB    128 MiB   512 MiB   2 GiB
-6           32 MiB    64 MiB    128 MiB   256 MiB   1 GiB     4 GiB
-7           64 MiB    128 MiB   256 MiB   512 MiB   2 GiB     8 GiB
-8           96 MiB    192 MiB   384 MiB   768 MiB   3 GiB     12 GiB
-9           128 MiB   256 MiB   512 MiB   1 GiB     4 GiB     16 GiB


File: tarlz.info,  Node: Examples,  Next: Problems,  Prev: Minimum archive sizes,  Up: Top

9 A small tutorial with examples
********************************

Example 1: Create a multimember compressed archive 'archive.tar.lz'
containing files 'a', 'b' and 'c'.

     tarlz -cf archive.tar.lz a b c


Example 2: Append files 'd' and 'e' to the multimember compressed archive
'archive.tar.lz'.

     tarlz -rf archive.tar.lz d e


Example 3: Create a solidly compressed appendable archive 'archive.tar.lz'
containing files 'a', 'b' and 'c'. Then append files 'd' and 'e' to the
archive.

     tarlz --asolid -cf archive.tar.lz a b c
     tarlz --asolid -rf archive.tar.lz d e


Example 4: Create a compressed appendable archive containing directories
'dir1', 'dir2' and 'dir3' with a separate lzip member per directory. Then
append files 'a', 'b', 'c', 'd' and 'e' to the archive, all of them
contained in a single lzip member. The resulting archive 'archive.tar.lz'
contains 5 lzip members (including the EOF member).

     tarlz --dsolid -cf archive.tar.lz dir1 dir2 dir3
     tarlz --asolid -rf archive.tar.lz a b c d e


Example 5: Create a solidly compressed archive 'archive.tar.lz' containing
files 'a', 'b' and 'c'. Note that no more files can be later appended to
the archive.

     tarlz --solid -cf archive.tar.lz a b c


Example 6: Extract all files from archive 'archive.tar.lz'.

     tarlz -xf archive.tar.lz


Example 7: Extract files 'a' and 'c', and the whole tree under directory
'dir1' from archive 'archive.tar.lz'.

     tarlz -xf archive.tar.lz a c dir1


Example 8: Copy the contents of directory 'sourcedir' to the directory
'destdir'.

     tarlz -C sourcedir -c . | tarlz -C destdir -x


Example 9: Compress the existing POSIX archive 'archive.tar' and write the
output to 'archive.tar.lz'. Compress each member individually for maximum
availability. (If one member in the compressed archive gets damaged, the
other members can still be extracted).

     tarlz -z --no-solid archive.tar


File: tarlz.info,  Node: Problems,  Next: Concept index,  Prev: Examples,  Up: Top

10 Reporting bugs
*****************

There are probably bugs in tarlz. There are certainly errors and omissions
in this manual. If you report them, they will get fixed. If you don't, no
one will ever know about them and they will remain unfixed for all
eternity, if not longer.

   If you find a bug in tarlz, please send electronic mail to
<lzip-bug@nongnu.org>. Include the version number, which you can find by
running 'tarlz --version' and 'tarlz -v --check-lib'.


File: tarlz.info,  Node: Concept index,  Prev: Problems,  Up: Top

Concept index
*************

[index]
* Menu:

* Amendments to pax format:              Amendments to pax format.  (line 6)
* bugs:                                  Problems.                  (line 6)
* examples:                              Examples.                  (line 6)
* file format:                           File format.               (line 6)
* getting help:                          Problems.                  (line 6)
* introduction:                          Introduction.              (line 6)
* invoking:                              Invoking tarlz.            (line 6)
* minimum archive sizes:                 Minimum archive sizes.     (line 6)
* options:                               Invoking tarlz.            (line 6)
* parallel tar decoding:                 Multi-threaded decoding.   (line 6)
* portable character set:                Portable character set.    (line 6)
* program design:                        Program design.            (line 6)
* usage:                                 Invoking tarlz.            (line 6)
* version:                               Invoking tarlz.            (line 6)



Tag Table:
Node: Top223
Node: Introduction1214
Node: Invoking tarlz4022
Ref: --data-size6436
Ref: --bsolid16388
Node: Portable character set21224
Node: File format22019
Ref: key_crc3226944
Node: Amendments to pax format32572
Ref: crc3233236
Ref: flawed-compat34547
Node: Program design37348
Node: Multi-threaded decoding41273
Node: Minimum archive sizes45764
Node: Examples47902
Node: Problems49918
Node: Concept index50473

End Tag Table


Local Variables:
coding: iso-8859-15
End: