Adding upstream version 0.7.upstream/0.7

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

15 files changed, 74 insertions, 74 deletions

diff --git a/ChangeLog b/ChangeLog
index 218c806..7b6ede5 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,8 @@
+2021-01-01  Antonio Diaz Diaz  <antonio@gnu.org>
+
+	* Version 0.7 released.
+	* main.c (main): Do not open output if input is a terminal.
+
 2020-06-24  Antonio Diaz Diaz  <antonio@gnu.org>
 
 	* Version 0.6 released.
@@ -51,7 +56,7 @@
 	* Tests the code shipped in linux patches before june 2018.
 
 
-Copyright (C) 2016-2020 Antonio Diaz Diaz.
+Copyright (C) 2016-2021 Antonio Diaz Diaz.
 
 This file is a collection of facts, and thus it is not copyrightable,
 but just in case, you have unlimited permission to copy, distribute, and
diff --git a/INSTALL b/INSTALL
index d6f1bc5..6c8bfa7 100644
--- a/INSTALL
+++ b/INSTALL
@@ -1,6 +1,6 @@
 Requirements
 ------------
-You will need a C99 compiler. (gcc 2.95 or newer is recommended).
+You will need a C99 compiler. (gcc 3.3.6 or newer is recommended).
 I use gcc 6.1.0 and 4.1.2, but the code should compile with any standards
 compliant compiler.
 Gcc is available at http://gcc.gnu.org.
@@ -69,7 +69,7 @@ After running 'configure', you can run 'make' and 'make install' as
 explained above.
 
 
-Copyright (C) 2016-2020 Antonio Diaz Diaz.
+Copyright (C) 2016-2021 Antonio Diaz Diaz.
 
 This file is free documentation: you have unlimited permission to copy,
 distribute, and modify it.
diff --git a/NEWS b/NEWS
index e78dfd5..7125322 100644
--- a/NEWS
+++ b/NEWS
@@ -1,19 +1,3 @@
-Changes in version 0.6:
+Changes in version 0.7:
 
-Option '-o, --output' now behaves like '-c, --stdout', but sending the
-output unconditionally to a file instead of to standard output. See the new
-description of '-o' in the manual. This change is not backwards compatible.
-Therefore commands like:
-  xlunzip -d -o foo - bar.lz < foo.lz
-must now be split into:
-  xlunzip -d -o foo - < foo.lz
-  xlunzip -d bar.lz
-or rewritten as:
-  xlunzip -d - bar.lz < foo.lz > foo
-
-In-place decompression of concatenated files should now work for any
-combination of files as long as they fit in memory and their total
-decompressed size is smaller than LONG_MAX minus a small extra space.
-
-The README file now includes an analysis of the amount of memory required
-for in-place decompression.
+Xlunzip now does not even open the output file if the input file is a terminal.
diff --git a/README b/README
index 3e26a40..7395a92 100644
--- a/README
+++ b/README
@@ -18,7 +18,7 @@ masked by a low compression ratio in the last members.
 
 The xlunzip tarball contains a copy of the lzip_decompress module and can be
 compiled and tested without downloading or applying the patch to the kernel.
- 
+
 My lzip patch for linux can be found at
 http://download.savannah.gnu.org/releases/lzip/kernel/
 
@@ -61,8 +61,8 @@ data is uncompressible. The worst case is very compressible data followed by
 uncompressible data because in this case the output pointer increases faster
 when the input pointer is smaller.
 
-        |                        *   <-- input pointer
-        |                    *   ,   <-- output pointer
+        |                        *   <-- input pointer (*)
+        |                    *   ,   <-- output pointer (,)
         |                * ,  '
         |            x  '            <-- overrun (x)
 memory  |        * ,'
@@ -71,7 +71,7 @@ address |    *   ,'
         |    ,'
         |  ,'
         |,'
-        `--------------------------
+        '--------------------------
                     time
 
 All we need to know to calculate the minimum required extra space is:
@@ -82,19 +82,23 @@ All we need to know to calculate the minimum required extra space is:
 The maximum expansion ratio of LZMA data is of about 1.4%. Rounding this up
 to 1/64 (1.5625%) and adding 36 bytes per input member, the extra space
 required to decompress lzip data in place is:
+
   extra_bytes = ( compressed_size >> 6 ) + members * 36
 
-Using the compressed size to calculate the extra_bytes (as in the equation
+Using the compressed size to calculate the extra_bytes (as in the formula
 above) may slightly overestimate the amount of space required in the worst
 case. But calculating the extra_bytes from the uncompressed size (as does
-linux) is wrong (and inefficient for high compression ratios). The formula
-used in arch/x86/boot/header.S
-  extra_bytes = (uncompressed_size >> 8) + 65536
-fails with 1 MB of zeros followed by 8 MB of random data, and wastes memory
-for compression ratios > 4:1.
+linux currently) is wrong (and inefficient for high compression ratios). The
+formula used in arch/x86/boot/header.S
+
+  extra_bytes = ( uncompressed_size >> 8 ) + 65536
+
+fails to decompress 1 MB of zeros followed by 8 MB of random data, wastes
+memory for compression ratios larger than 4:1, and does not even consider
+multimember data.
 
 
-Copyright (C) 2016-2020 Antonio Diaz Diaz.
+Copyright (C) 2016-2021 Antonio Diaz Diaz.
 
 This file is free documentation: you have unlimited permission to copy,
 distribute, and modify it.
diff --git a/carg_parser.c b/carg_parser.c
index 0f60878..d0c05d5 100644
--- a/carg_parser.c
+++ b/carg_parser.c
@@ -1,5 +1,5 @@
 /* Arg_parser - POSIX/GNU command line argument parser. (C version)
-   Copyright (C) 2006-2020 Antonio Diaz Diaz.
+   Copyright (C) 2006-2021 Antonio Diaz Diaz.
 
    This library is free software. Redistribution and use in source and
    binary forms, with or without modification, are permitted provided
diff --git a/carg_parser.h b/carg_parser.h
index a442b7b..c5f2352 100644
--- a/carg_parser.h
+++ b/carg_parser.h
@@ -1,5 +1,5 @@
 /* Arg_parser - POSIX/GNU command line argument parser. (C version)
-   Copyright (C) 2006-2020 Antonio Diaz Diaz.
+   Copyright (C) 2006-2021 Antonio Diaz Diaz.
 
    This library is free software. Redistribution and use in source and
    binary forms, with or without modification, are permitted provided
diff --git a/configure b/configure
index da06771..b33c121 100755
--- a/configure
+++ b/configure
@@ -1,12 +1,12 @@
 #! /bin/sh
 # configure script for Xlunzip - Test tool for the lzip_decompress linux module
-# Copyright (C) 2016-2020 Antonio Diaz Diaz.
+# Copyright (C) 2016-2021 Antonio Diaz Diaz.
 #
 # This configure script is free software: you have unlimited permission
 # to copy, distribute, and modify it.
 
 pkgname=xlunzip
-pkgversion=0.6
+pkgversion=0.7
 progname=xlunzip
 srctrigger=doc/${progname}.1
 
@@ -167,7 +167,7 @@ echo "LDFLAGS = ${LDFLAGS}"
 rm -f Makefile
 cat > Makefile << EOF
 # Makefile for Xlunzip - Test tool for the lzip_decompress linux module
-# Copyright (C) 2016-2020 Antonio Diaz Diaz.
+# Copyright (C) 2016-2021 Antonio Diaz Diaz.
 # This file was generated automatically by configure. Don't edit.
 #
 # This Makefile is free software: you have unlimited permission
diff --git a/decompress_lunzip.c b/decompress_lunzip.c
index d492095..9586bb5 100644
--- a/decompress_lunzip.c
+++ b/decompress_lunzip.c
@@ -1,7 +1,7 @@
 /*
  * Wrapper for decompressing LZIP-compressed kernel, initramfs, and initrd
  *
- * Copyright (C) 2016-2020 Antonio Diaz Diaz.
+ * Copyright (C) 2016-2021 Antonio Diaz Diaz.
  *
  * Licensed under GPLv2 or later, see file LICENSE in this source tree.
  */
diff --git a/doc/xlunzip.1 b/doc/xlunzip.1
index 2f7ccb1..51c800d 100644
--- a/doc/xlunzip.1
+++ b/doc/xlunzip.1
@@ -1,5 +1,5 @@
-.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.46.1.
-.TH XLUNZIP "1" "June 2020" "xlunzip 0.6" "User Commands"
+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.47.16.
+.TH XLUNZIP "1" "January 2021" "xlunzip 0.7" "User Commands"
 .SH NAME
 xlunzip \- test tool for the lzip_decompress linux module
 .SH SYNOPSIS
@@ -86,7 +86,7 @@ Report bugs to lzip\-bug@nongnu.org
 .br
 Xlunzip home page: http://www.nongnu.org/lzip/xlunzip.html
 .SH COPYRIGHT
-Copyright \(co 2020 Antonio Diaz Diaz.
+Copyright \(co 2021 Antonio Diaz Diaz.
 License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl.html>
 .br
 This is free software: you are free to change and redistribute it.
diff --git a/in_place.c b/in_place.c
index 7f00933..1f2fe22 100644
--- a/in_place.c
+++ b/in_place.c
@@ -1,5 +1,5 @@
 /* Xlunzip - Test tool for the lzip_decompress linux module
-   Copyright (C) 2016-2020 Antonio Diaz Diaz.
+   Copyright (C) 2016-2021 Antonio Diaz Diaz.
 
    This program is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
@@ -84,14 +84,15 @@ static uint8_t * read_file( const int infd, long * const buffer_sizep,
 
 struct File_sizes
   {
-  unsigned long long csize;
-  unsigned long long dsize;
+  unsigned long long csize;		/* compressed size */
+  unsigned long long dsize;		/* decompressed size */
+  unsigned long tsize;			/* trailing data size */
   long members;
-  long trailing;
   };
 
 static const char * set_file_sizes( struct File_sizes * const file_sizes,
-                      const uint8_t * const buffer, const long file_size )
+                                    const uint8_t * const buffer,
+                                    const unsigned long file_size )
   {
   if( file_size <= Lh_size ) return "File ends unexpectedly at member header.";
   if( file_size < min_member_size ) return "Input file is too short.";
@@ -101,8 +102,8 @@ static const char * set_file_sizes( struct File_sizes * const file_sizes,
   if( !Lh_verify_version( *header ) )
     return "Version of lzip member format not supported.";
 
-  file_sizes->csize = file_sizes->dsize = 0;
-  file_sizes->members = file_sizes->trailing = 0;
+  file_sizes->csize = file_sizes->dsize = file_sizes->tsize = 0;
+  file_sizes->members = 0;
   unsigned long pos = file_size;	/* always points to a header or to EOF */
   while( pos >= min_member_size )
     {
@@ -128,7 +129,7 @@ static const char * set_file_sizes( struct File_sizes * const file_sizes,
       }
     if( file_sizes->csize == 0 && file_size - pos > 0 )
       {
-      file_sizes->trailing = file_size - pos;
+      file_sizes->tsize = file_size - pos;
       header = (const Lzip_header *)( buffer + pos );
       if( file_size - pos > Lh_size &&
           Lh_verify_magic( *header ) && Lh_verify_version( *header ) )
@@ -140,7 +141,7 @@ static const char * set_file_sizes( struct File_sizes * const file_sizes,
     ++file_sizes->members;
     }
   if( pos != 0 || file_sizes->csize == 0 ) return "Can't get file sizes.";
-  if( file_sizes->csize + file_sizes->trailing != (unsigned long)file_size )
+  if( file_sizes->csize + file_sizes->tsize != file_size )
     return "Error getting file sizes.";
   if( file_sizes->csize > LONG_MAX ) return "File is larger than LONG_MAX.";
   if( file_sizes->dsize > LONG_MAX ) return "Data is larger than LONG_MAX.";
@@ -192,8 +193,6 @@ int decompress_in_place( const int infd, struct Pretty_print * const pp,
   buffer_size = target_buffer_size;
   const long cbegin = buffer_size - csize;	/* overwrite trailing data */
   if( cbegin > 0 ) memmove( buffer + cbegin, buffer, csize );
-/*fprintf( stderr, "buffer_size = %ld, cbegin = %ld, extra_bytes = %ld\n",
-         buffer_size, cbegin, extra_bytes );*/
 
   long in_pos, out_pos;
   int retval;
diff --git a/linux_lzip.h b/linux_lzip.h
index 90d54e8..398ef84 100644
--- a/linux_lzip.h
+++ b/linux_lzip.h
@@ -4,7 +4,7 @@
 /*
  * LZIP decompressor
  *
- * Copyright (C) 2016-2020 Antonio Diaz Diaz.
+ * Copyright (C) 2016-2021 Antonio Diaz Diaz.
  */
 
 /* Return values (< 0 = Error) */
diff --git a/lzip.h b/lzip.h
index f06c084..15713ec 100644
--- a/lzip.h
+++ b/lzip.h
@@ -1,5 +1,5 @@
 /* Xlunzip - Test tool for the lzip_decompress linux module
-   Copyright (C) 2016-2020 Antonio Diaz Diaz.
+   Copyright (C) 2016-2021 Antonio Diaz Diaz.
 
    This program is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
@@ -75,6 +75,9 @@ static inline unsigned long long Lt_get_member_size( const Lzip_trailer data )
   }
 
 
+static inline void set_retval( int * retval, const int new_val )
+  { if( *retval < new_val ) *retval = new_val; }
+
 static const char * const mem_msg = "Not enough memory.";
 
 /* defined in in_place.c */
diff --git a/lzip_decompress.c b/lzip_decompress.c
index 8fa8bf1..157a798 100644
--- a/lzip_decompress.c
+++ b/lzip_decompress.c
@@ -1,7 +1,7 @@
 /*
  * LZIP decompressor
  *
- * Copyright (C) 2016-2020 Antonio Diaz Diaz.
+ * Copyright (C) 2016-2021 Antonio Diaz Diaz.
  *
  * Licensed under GPLv2 or later, see file LICENSE in this source tree.
  */
diff --git a/main.c b/main.c
index 0dc02c7..dc403da 100644
--- a/main.c
+++ b/main.c
@@ -1,5 +1,5 @@
 /* Xlunzip - Test tool for the lzip_decompress linux module
-   Copyright (C) 2016-2020 Antonio Diaz Diaz.
+   Copyright (C) 2016-2021 Antonio Diaz Diaz.
 
    This program is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
@@ -75,7 +75,7 @@ static void show_error( const char * const msg, const int errcode,
                         const bool help );
 
 static const char * const program_name = "xlunzip";
-static const char * const program_year = "2020";
+static const char * const program_year = "2021";
 static const char * invocation_name = "xlunzip";	/* default value */
 
 static const struct { const char * from; const char * to; } known_extensions[] = {
@@ -393,6 +393,19 @@ static void signal_handler( int sig )
   }
 
 
+static bool check_tty_in( const char * const input_filename, const int infd,
+                          const bool testing, int * const retval )
+  {
+  if( isatty( infd ) )				/* for example /dev/tty */
+    { show_file_error( input_filename,
+                       "I won't read compressed data from a terminal.", 0 );
+      close( infd ); set_retval( retval, 1 );
+      if( !testing ) cleanup_and_fail( *retval );
+      return false; }
+  return true;
+  }
+
+
 /* Set permissions, owner, and times. */
 static void close_and_set_permissions( const struct stat * const in_statsp )
   {
@@ -538,9 +551,6 @@ void show_results( struct Pretty_print * const pp, const long in_pos,
   }
 
 
-static inline void set_retval( int * retval, const int new_val )
-  { if( *retval < new_val ) *retval = new_val; }
-
 static void show_error( const char * const msg, const int errcode,
                         const bool help )
   {
@@ -692,10 +702,12 @@ int main( const int argc, const char * const argv[] )
     struct stat in_stats;
     const struct stat * in_statsp;
 
+    Pp_set_name( &pp, filenames[i] );
     if( strcmp( filenames[i], "-" ) == 0 )
       {
       if( stdin_used ) continue; else stdin_used = true;
       infd = STDIN_FILENO;
+      if( !check_tty_in( pp.name, infd, testing, &retval ) ) continue;
       if( one_to_one ) { outfd = STDOUT_FILENO; output_filename[0] = 0; }
       }
     else
@@ -703,24 +715,15 @@ int main( const int argc, const char * const argv[] )
       input_filename = filenames[i];
       infd = open_instream( input_filename, &in_stats, one_to_one );
       if( infd < 0 ) { set_retval( &retval, 1 ); continue; }
-      if( one_to_one )
+      if( !check_tty_in( pp.name, infd, testing, &retval ) ) continue;
+      if( one_to_one )			/* open outfd after verifying infd */
         {
         set_d_outname( input_filename, extension_index( input_filename ) );
         if( !open_outstream( force, true ) )
-          { set_retval( &retval, 1 ); close( infd ); infd = -1; continue; }
+          { close( infd ); infd = -1; set_retval( &retval, 1 ); continue; }
         }
       }
 
-    Pp_set_name( &pp, input_filename );
-    if( isatty( infd ) )			/* for example /dev/tty */
-      {
-      show_file_error( pp.name,
-                       "I won't read compressed data from a terminal.", 0 );
-      set_retval( &retval, 1 );
-      if( testing ) { close( infd ); infd = -1; continue; }
-      cleanup_and_fail( retval );
-      }
-
     if( to_file && outfd < 0 )		/* open outfd after verifying infd */
       {
       output_filename = resize_buffer( output_filename,
diff --git a/testsuite/check.sh b/testsuite/check.sh
index 5625ac2..5609a88 100755
--- a/testsuite/check.sh
+++ b/testsuite/check.sh
@@ -1,6 +1,6 @@
 #! /bin/sh
 # check script for Xlunzip - Test tool for the lzip_decompress linux module
-# Copyright (C) 2016-2020 Antonio Diaz Diaz.
+# Copyright (C) 2016-2021 Antonio Diaz Diaz.
 #
 # This script is free software: you have unlimited permission
 # to copy, distribute, and modify it.
@@ -104,6 +104,8 @@ printf "to be overwritten" > copy || framework_failure
 cmp in copy || test_failed $LINENO
 
 printf "to be overwritten" > copy || framework_failure
+"${LZIP}" -d -o copy < "${in_lz}" 2> /dev/null
+[ $? = 1 ] || test_failed $LINENO
 "${LZIP}" -df -o copy < "${in_lz}" || test_failed $LINENO
 cmp in copy || test_failed $LINENO
 rm -f out copy || framework_failure
@@ -228,9 +230,9 @@ cat "${in_lz}" > ingin.lz || framework_failure
 printf "g" >> ingin.lz || framework_failure
 cat "${in_lz}" >> ingin.lz || framework_failure
 "${LZIP}" -t ingin.lz || test_failed $LINENO
+"${LZIP}" -t < ingin.lz || test_failed $LINENO
 "${LZIP}" -cd ingin.lz > copy || test_failed $LINENO
 cmp in copy || test_failed $LINENO
-"${LZIP}" -t < ingin.lz || test_failed $LINENO
 "${LZIP}" -d < ingin.lz > copy || test_failed $LINENO
 cmp in copy || test_failed $LINENO