Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 38 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.txt b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.txt
new file mode 100644
index 000000000..733b64a4d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.txt
@@ -0,0 +1,38 @@
+* BROADCOM BRCMSTB/BMIPS SDHCI Controller
+
+This file documents differences between the core properties in mmc.txt
+and the properties used by the sdhci-brcmstb driver.
+
+NOTE: The driver disables all UHS speed modes by default and depends
+on Device Tree properties to enable them for SoC/Board combinations
+that support them.
+
+Required properties:
+- compatible: should be one of the following
+  - "brcm,bcm7425-sdhci"
+  - "brcm,bcm7445-sdhci"
+
+Refer to clocks/clock-bindings.txt for generic clock consumer properties.
+
+Example:
+
+	sdhci@f03e0100 {
+		compatible = "brcm,bcm7425-sdhci";
+		reg = <0xf03e0000 0x100>;
+		interrupts = <0x0 0x26 0x0>;
+		sdhci,auto-cmd12;
+		clocks = <&sw_sdio>;
+		sd-uhs-sdr50;
+		sd-uhs-ddr50;
+	};
+
+	sdhci@f03e0300 {
+		non-removable;
+		bus-width = <0x8>;
+		compatible = "brcm,bcm7425-sdhci";
+		reg = <0xf03e0200 0x100>;
+		interrupts = <0x0 0x27 0x0>;
+		sdhci,auto-cmd12;
+		clocks = <sw_sdio>;
+		mmc-hs200-1_8v;
+	};