Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

3 files changed, 1288 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/opp/kryo-cpufreq.txt b/Documentation/devicetree/bindings/opp/kryo-cpufreq.txt
new file mode 100644
index 000000000..c2127b968
--- /dev/null
+++ b/Documentation/devicetree/bindings/opp/kryo-cpufreq.txt
@@ -0,0 +1,680 @@
+Qualcomm Technologies, Inc. KRYO CPUFreq and OPP bindings
+===================================
+
+In Certain Qualcomm Technologies, Inc. SoCs like apq8096 and msm8996
+that have KRYO processors, the CPU ferequencies subset and voltage value
+of each OPP varies based on the silicon variant in use.
+Qualcomm Technologies, Inc. Process Voltage Scaling Tables
+defines the voltage and frequency value based on the msm-id in SMEM
+and speedbin blown in the efuse combination.
+The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the SoC
+to provide the OPP framework with required information (existing HW bitmap).
+This is used to determine the voltage and frequency value for each OPP of
+operating-points-v2 table when it is parsed by the OPP framework.
+
+Required properties:
+--------------------
+In 'cpus' nodes:
+- operating-points-v2: Phandle to the operating-points-v2 table to use.
+
+In 'operating-points-v2' table:
+- compatible: Should be
+	- 'operating-points-v2-kryo-cpu' for apq8096 and msm8996.
+- nvmem-cells: A phandle pointing to a nvmem-cells node representing the
+		efuse registers that has information about the
+		speedbin that is used to select the right frequency/voltage
+		value pair.
+		Please refer the for nvmem-cells
+		bindings Documentation/devicetree/bindings/nvmem/nvmem.txt
+		and also examples below.
+
+In every OPP node:
+- opp-supported-hw: A single 32 bit bitmap value, representing compatible HW.
+		    Bitmap:
+			0:	MSM8996 V3, speedbin 0
+			1:	MSM8996 V3, speedbin 1
+			2:	MSM8996 V3, speedbin 2
+			3:	unused
+			4:	MSM8996 SG, speedbin 0
+			5:	MSM8996 SG, speedbin 1
+			6:	MSM8996 SG, speedbin 2
+			7-31:	unused
+
+Example 1:
+---------
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			clocks = <&kryocc 0>;
+			cpu-supply = <&pm8994_s11_saw>;
+			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+			      compatible = "cache";
+			      cache-level = <2>;
+			};
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			clocks = <&kryocc 0>;
+			cpu-supply = <&pm8994_s11_saw>;
+			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU2: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			clocks = <&kryocc 1>;
+			cpu-supply = <&pm8994_s11_saw>;
+			operating-points-v2 = <&cluster1_opp>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_1>;
+			L2_1: l2-cache {
+			      compatible = "cache";
+			      cache-level = <2>;
+			};
+		};
+
+		CPU3: cpu@101 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+			clocks = <&kryocc 1>;
+			cpu-supply = <&pm8994_s11_saw>;
+			operating-points-v2 = <&cluster1_opp>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_1>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&CPU2>;
+				};
+
+				core1 {
+					cpu = <&CPU3>;
+				};
+			};
+		};
+	};
+
+	cluster0_opp: opp_table0 {
+		compatible = "operating-points-v2-kryo-cpu";
+		nvmem-cells = <&speedbin_efuse>;
+		opp-shared;
+
+		opp-307200000 {
+			opp-hz = /bits/ 64 <307200000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x77>;
+			clock-latency-ns = <200000>;
+		};
+		opp-384000000 {
+			opp-hz = /bits/ 64 <384000000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-422400000 {
+			opp-hz = /bits/ 64 <422400000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-460800000 {
+			opp-hz = /bits/ 64 <460800000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-480000000 {
+			opp-hz = /bits/ 64 <480000000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-537600000 {
+			opp-hz = /bits/ 64 <537600000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-556800000 {
+			opp-hz = /bits/ 64 <556800000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-614400000 {
+			opp-hz = /bits/ 64 <614400000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-652800000 {
+			opp-hz = /bits/ 64 <652800000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-691200000 {
+			opp-hz = /bits/ 64 <691200000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-729600000 {
+			opp-hz = /bits/ 64 <729600000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-768000000 {
+			opp-hz = /bits/ 64 <768000000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-844800000 {
+			opp-hz = /bits/ 64 <844800000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x77>;
+			clock-latency-ns = <200000>;
+		};
+		opp-902400000 {
+			opp-hz = /bits/ 64 <902400000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-960000000 {
+			opp-hz = /bits/ 64 <960000000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-979200000 {
+			opp-hz = /bits/ 64 <979200000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1036800000 {
+			opp-hz = /bits/ 64 <1036800000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1113600000 {
+			opp-hz = /bits/ 64 <1113600000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1132800000 {
+			opp-hz = /bits/ 64 <1132800000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1190400000 {
+			opp-hz = /bits/ 64 <1190400000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1209600000 {
+			opp-hz = /bits/ 64 <1209600000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1228800000 {
+			opp-hz = /bits/ 64 <1228800000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1286400000 {
+			opp-hz = /bits/ 64 <1286400000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1324800000 {
+			opp-hz = /bits/ 64 <1324800000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x5>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1363200000 {
+			opp-hz = /bits/ 64 <1363200000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x72>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1401600000 {
+			opp-hz = /bits/ 64 <1401600000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x5>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1440000000 {
+			opp-hz = /bits/ 64 <1440000000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1478400000 {
+			opp-hz = /bits/ 64 <1478400000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x1>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1497600000 {
+			opp-hz = /bits/ 64 <1497600000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x4>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1593600000 {
+			opp-hz = /bits/ 64 <1593600000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x71>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1996800000 {
+			opp-hz = /bits/ 64 <1996800000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x20>;
+			clock-latency-ns = <200000>;
+		};
+		opp-2188800000 {
+			opp-hz = /bits/ 64 <2188800000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x10>;
+			clock-latency-ns = <200000>;
+		};
+	};
+
+	cluster1_opp: opp_table1 {
+		compatible = "operating-points-v2-kryo-cpu";
+		nvmem-cells = <&speedbin_efuse>;
+		opp-shared;
+
+		opp-307200000 {
+			opp-hz = /bits/ 64 <307200000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x77>;
+			clock-latency-ns = <200000>;
+		};
+		opp-384000000 {
+			opp-hz = /bits/ 64 <384000000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-403200000 {
+			opp-hz = /bits/ 64 <403200000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-460800000 {
+			opp-hz = /bits/ 64 <460800000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-480000000 {
+			opp-hz = /bits/ 64 <480000000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-537600000 {
+			opp-hz = /bits/ 64 <537600000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-556800000 {
+			opp-hz = /bits/ 64 <556800000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-614400000 {
+			opp-hz = /bits/ 64 <614400000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-652800000 {
+			opp-hz = /bits/ 64 <652800000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-691200000 {
+			opp-hz = /bits/ 64 <691200000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-729600000 {
+			opp-hz = /bits/ 64 <729600000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-748800000 {
+			opp-hz = /bits/ 64 <748800000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-806400000 {
+			opp-hz = /bits/ 64 <806400000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-825600000 {
+			opp-hz = /bits/ 64 <825600000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-883200000 {
+			opp-hz = /bits/ 64 <883200000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-902400000 {
+			opp-hz = /bits/ 64 <902400000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-940800000 {
+			opp-hz = /bits/ 64 <940800000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-979200000 {
+			opp-hz = /bits/ 64 <979200000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1036800000 {
+			opp-hz = /bits/ 64 <1036800000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1113600000 {
+			opp-hz = /bits/ 64 <1113600000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1132800000 {
+			opp-hz = /bits/ 64 <1132800000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1190400000 {
+			opp-hz = /bits/ 64 <1190400000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1209600000 {
+			opp-hz = /bits/ 64 <1209600000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1248000000 {
+			opp-hz = /bits/ 64 <1248000000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1286400000 {
+			opp-hz = /bits/ 64 <1286400000>;
+			opp-microvolt = <905000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1324800000 {
+			opp-hz = /bits/ 64 <1324800000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1363200000 {
+			opp-hz = /bits/ 64 <1363200000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1401600000 {
+			opp-hz = /bits/ 64 <1401600000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1440000000 {
+			opp-hz = /bits/ 64 <1440000000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1478400000 {
+			opp-hz = /bits/ 64 <1478400000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1555200000 {
+			opp-hz = /bits/ 64 <1555200000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1593600000 {
+			opp-hz = /bits/ 64 <1593600000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1632000000 {
+			opp-hz = /bits/ 64 <1632000000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1670400000 {
+			opp-hz = /bits/ 64 <1670400000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1708800000 {
+			opp-hz = /bits/ 64 <1708800000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1747200000 {
+			opp-hz = /bits/ 64 <1747200000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x70>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1785600000 {
+			opp-hz = /bits/ 64 <1785600000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x7>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1804800000 {
+			opp-hz = /bits/ 64 <1804800000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x6>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1824000000 {
+			opp-hz = /bits/ 64 <1824000000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x71>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1900800000 {
+			opp-hz = /bits/ 64 <1900800000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x74>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1920000000 {
+			opp-hz = /bits/ 64 <1920000000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x1>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1977600000 {
+			opp-hz = /bits/ 64 <1977600000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x30>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1996800000 {
+			opp-hz = /bits/ 64 <1996800000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x1>;
+			clock-latency-ns = <200000>;
+		};
+		opp-2054400000 {
+			opp-hz = /bits/ 64 <2054400000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x30>;
+			clock-latency-ns = <200000>;
+		};
+		opp-2073600000 {
+			opp-hz = /bits/ 64 <2073600000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x1>;
+			clock-latency-ns = <200000>;
+		};
+		opp-2150400000 {
+			opp-hz = /bits/ 64 <2150400000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x31>;
+			clock-latency-ns = <200000>;
+		};
+		opp-2246400000 {
+			opp-hz = /bits/ 64 <2246400000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x10>;
+			clock-latency-ns = <200000>;
+		};
+		opp-2342400000 {
+			opp-hz = /bits/ 64 <2342400000>;
+			opp-microvolt = <1140000 905000 1140000>;
+			opp-supported-hw = <0x10>;
+			clock-latency-ns = <200000>;
+		};
+	};
+
+....
+
+reserved-memory {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	ranges;
+....
+	smem_mem: smem-mem@86000000 {
+		reg = <0x0 0x86000000 0x0 0x200000>;
+		no-map;
+	};
+....
+};
+
+smem {
+	compatible = "qcom,smem";
+	memory-region = <&smem_mem>;
+	hwlocks = <&tcsr_mutex 3>;
+};
+
+soc {
+....
+	qfprom: qfprom@74000 {
+		compatible = "qcom,qfprom";
+		reg = <0x00074000 0x8ff>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		....
+		speedbin_efuse: speedbin@133 {
+			reg = <0x133 0x1>;
+			bits = <5 3>;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt
new file mode 100644
index 000000000..c396c4c0a
--- /dev/null
+++ b/Documentation/devicetree/bindings/opp/opp.txt
@@ -0,0 +1,545 @@
+Generic OPP (Operating Performance Points) Bindings
+----------------------------------------------------
+
+Devices work at voltage-current-frequency combinations and some implementations
+have the liberty of choosing these. These combinations are called Operating
+Performance Points aka OPPs. This document defines bindings for these OPPs
+applicable across wide range of devices. For illustration purpose, this document
+uses CPU as a device.
+
+This document contain multiple versions of OPP binding and only one of them
+should be used per device.
+
+Binding 1: operating-points
+============================
+
+This binding only supports voltage-frequency pairs.
+
+Properties:
+- operating-points: An array of 2-tuples items, and each item consists
+  of frequency and voltage like <freq-kHz vol-uV>.
+	freq: clock frequency in kHz
+	vol: voltage in microvolt
+
+Examples:
+
+cpu@0 {
+	compatible = "arm,cortex-a9";
+	reg = <0>;
+	next-level-cache = <&L2>;
+	operating-points = <
+		/* kHz    uV */
+		792000  1100000
+		396000  950000
+		198000  850000
+	>;
+};
+
+
+Binding 2: operating-points-v2
+============================
+
+* Property: operating-points-v2
+
+Devices supporting OPPs must set their "operating-points-v2" property with
+phandle to a OPP table in their DT node. The OPP core will use this phandle to
+find the operating points for the device.
+
+This can contain more than one phandle for power domain providers that provide
+multiple power domains. That is, one phandle for each power domain. If only one
+phandle is available, then the same OPP table will be used for all power domains
+provided by the power domain provider.
+
+If required, this can be extended for SoC vendor specific bindings. Such bindings
+should be documented as Documentation/devicetree/bindings/power/<vendor>-opp.txt
+and should have a compatible description like: "operating-points-v2-<vendor>".
+
+* OPP Table Node
+
+This describes the OPPs belonging to a device. This node can have following
+properties:
+
+Required properties:
+- compatible: Allow OPPs to express their compatibility. It should be:
+  "operating-points-v2".
+
+- OPP nodes: One or more OPP nodes describing voltage-current-frequency
+  combinations. Their name isn't significant but their phandle can be used to
+  reference an OPP.
+
+Optional properties:
+- opp-shared: Indicates that device nodes using this OPP Table Node's phandle
+  switch their DVFS state together, i.e. they share clock/voltage/current lines.
+  Missing property means devices have independent clock/voltage/current lines,
+  but they share OPP tables.
+
+- status: Marks the OPP table enabled/disabled.
+
+
+* OPP Node
+
+This defines voltage-current-frequency combinations along with other related
+properties.
+
+Required properties:
+- opp-hz: Frequency in Hz, expressed as a 64-bit big-endian integer. This is a
+  required property for all device nodes but devices like power domains. The
+  power domain nodes must have another (implementation dependent) property which
+  uniquely identifies the OPP nodes.
+
+Optional properties:
+- opp-microvolt: voltage in micro Volts.
+
+  A single regulator's voltage is specified with an array of size one or three.
+  Single entry is for target voltage and three entries are for <target min max>
+  voltages.
+
+  Entries for multiple regulators shall be provided in the same field separated
+  by angular brackets <>. The OPP binding doesn't provide any provisions to
+  relate the values to their power supplies or the order in which the supplies
+  need to be configured and that is left for the implementation specific
+  binding.
+
+  Entries for all regulators shall be of the same size, i.e. either all use a
+  single value or triplets.
+
+- opp-microvolt-<name>: Named opp-microvolt property. This is exactly similar to
+  the above opp-microvolt property, but allows multiple voltage ranges to be
+  provided for the same OPP. At runtime, the platform can pick a <name> and
+  matching opp-microvolt-<name> property will be enabled for all OPPs. If the
+  platform doesn't pick a specific <name> or the <name> doesn't match with any
+  opp-microvolt-<name> properties, then opp-microvolt property shall be used, if
+  present.
+
+- opp-microamp: The maximum current drawn by the device in microamperes
+  considering system specific parameters (such as transients, process, aging,
+  maximum operating temperature range etc.) as necessary. This may be used to
+  set the most efficient regulator operating mode.
+
+  Should only be set if opp-microvolt is set for the OPP.
+
+  Entries for multiple regulators shall be provided in the same field separated
+  by angular brackets <>. If current values aren't required for a regulator,
+  then it shall be filled with 0. If current values aren't required for any of
+  the regulators, then this field is not required. The OPP binding doesn't
+  provide any provisions to relate the values to their power supplies or the
+  order in which the supplies need to be configured and that is left for the
+  implementation specific binding.
+
+- opp-microamp-<name>: Named opp-microamp property. Similar to
+  opp-microvolt-<name> property, but for microamp instead.
+
+- clock-latency-ns: Specifies the maximum possible transition latency (in
+  nanoseconds) for switching to this OPP from any other OPP.
+
+- turbo-mode: Marks the OPP to be used only for turbo modes. Turbo mode is
+  available on some platforms, where the device can run over its operating
+  frequency for a short duration of time limited by the device's power, current
+  and thermal limits.
+
+- opp-suspend: Marks the OPP to be used during device suspend. Only one OPP in
+  the table should have this.
+
+- opp-supported-hw: This enables us to select only a subset of OPPs from the
+  larger OPP table, based on what version of the hardware we are running on. We
+  still can't have multiple nodes with the same opp-hz value in OPP table.
+
+  It's a user defined array containing a hierarchy of hardware version numbers,
+  supported by the OPP. For example: a platform with hierarchy of three levels
+  of versions (A, B and C), this field should be like <X Y Z>, where X
+  corresponds to Version hierarchy A, Y corresponds to version hierarchy B and Z
+  corresponds to version hierarchy C.
+
+  Each level of hierarchy is represented by a 32 bit value, and so there can be
+  only 32 different supported version per hierarchy. i.e. 1 bit per version. A
+  value of 0xFFFFFFFF will enable the OPP for all versions for that hierarchy
+  level. And a value of 0x00000000 will disable the OPP completely, and so we
+  never want that to happen.
+
+  If 32 values aren't sufficient for a version hierarchy, than that version
+  hierarchy can be contained in multiple 32 bit values. i.e. <X Y Z1 Z2> in the
+  above example, Z1 & Z2 refer to the version hierarchy Z.
+
+- status: Marks the node enabled/disabled.
+
+- required-opps: This contains phandle to an OPP node in another device's OPP
+  table. It may contain an array of phandles, where each phandle points to an
+  OPP of a different device. It should not contain multiple phandles to the OPP
+  nodes in the same OPP table. This specifies the minimum required OPP of the
+  device(s), whose OPP's phandle is present in this property, for the
+  functioning of the current device at the current OPP (where this property is
+  present).
+
+Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states together.
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			next-level-cache = <&L2>;
+			clocks = <&clk_controller 0>;
+			clock-names = "cpu";
+			cpu-supply = <&cpu_supply0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			next-level-cache = <&L2>;
+			clocks = <&clk_controller 0>;
+			clock-names = "cpu";
+			cpu-supply = <&cpu_supply0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+	};
+
+	cpu0_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <975000 970000 985000>;
+			opp-microamp = <70000>;
+			clock-latency-ns = <300000>;
+			opp-suspend;
+		};
+		opp-1100000000 {
+			opp-hz = /bits/ 64 <1100000000>;
+			opp-microvolt = <1000000 980000 1010000>;
+			opp-microamp = <80000>;
+			clock-latency-ns = <310000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1025000>;
+			clock-latency-ns = <290000>;
+			turbo-mode;
+		};
+	};
+};
+
+Example 2: Single cluster, Quad-core Qualcom-krait, switches DVFS states
+independently.
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "qcom,krait";
+			reg = <0>;
+			next-level-cache = <&L2>;
+			clocks = <&clk_controller 0>;
+			clock-names = "cpu";
+			cpu-supply = <&cpu_supply0>;
+			operating-points-v2 = <&cpu_opp_table>;
+		};
+
+		cpu@1 {
+			compatible = "qcom,krait";
+			reg = <1>;
+			next-level-cache = <&L2>;
+			clocks = <&clk_controller 1>;
+			clock-names = "cpu";
+			cpu-supply = <&cpu_supply1>;
+			operating-points-v2 = <&cpu_opp_table>;
+		};
+
+		cpu@2 {
+			compatible = "qcom,krait";
+			reg = <2>;
+			next-level-cache = <&L2>;
+			clocks = <&clk_controller 2>;
+			clock-names = "cpu";
+			cpu-supply = <&cpu_supply2>;
+			operating-points-v2 = <&cpu_opp_table>;
+		};
+
+		cpu@3 {
+			compatible = "qcom,krait";
+			reg = <3>;
+			next-level-cache = <&L2>;
+			clocks = <&clk_controller 3>;
+			clock-names = "cpu";
+			cpu-supply = <&cpu_supply3>;
+			operating-points-v2 = <&cpu_opp_table>;
+		};
+	};
+
+	cpu_opp_table: opp_table {
+		compatible = "operating-points-v2";
+
+		/*
+		 * Missing opp-shared property means CPUs switch DVFS states
+		 * independently.
+		 */
+
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <975000 970000 985000>;
+			opp-microamp = <70000>;
+			clock-latency-ns = <300000>;
+			opp-suspend;
+		};
+		opp-1100000000 {
+			opp-hz = /bits/ 64 <1100000000>;
+			opp-microvolt = <1000000 980000 1010000>;
+			opp-microamp = <80000>;
+			clock-latency-ns = <310000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1025000>;
+			opp-microamp = <90000;
+			lock-latency-ns = <290000>;
+			turbo-mode;
+		};
+	};
+};
+
+Example 3: Dual-cluster, Dual-core per cluster. CPUs within a cluster switch
+DVFS state together.
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a7";
+			reg = <0>;
+			next-level-cache = <&L2>;
+			clocks = <&clk_controller 0>;
+			clock-names = "cpu";
+			cpu-supply = <&cpu_supply0>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a7";
+			reg = <1>;
+			next-level-cache = <&L2>;
+			clocks = <&clk_controller 0>;
+			clock-names = "cpu";
+			cpu-supply = <&cpu_supply0>;
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		cpu@100 {
+			compatible = "arm,cortex-a15";
+			reg = <100>;
+			next-level-cache = <&L2>;
+			clocks = <&clk_controller 1>;
+			clock-names = "cpu";
+			cpu-supply = <&cpu_supply1>;
+			operating-points-v2 = <&cluster1_opp>;
+		};
+
+		cpu@101 {
+			compatible = "arm,cortex-a15";
+			reg = <101>;
+			next-level-cache = <&L2>;
+			clocks = <&clk_controller 1>;
+			clock-names = "cpu";
+			cpu-supply = <&cpu_supply1>;
+			operating-points-v2 = <&cluster1_opp>;
+		};
+	};
+
+	cluster0_opp: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <975000 970000 985000>;
+			opp-microamp = <70000>;
+			clock-latency-ns = <300000>;
+			opp-suspend;
+		};
+		opp-1100000000 {
+			opp-hz = /bits/ 64 <1100000000>;
+			opp-microvolt = <1000000 980000 1010000>;
+			opp-microamp = <80000>;
+			clock-latency-ns = <310000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1025000>;
+			opp-microamp = <90000>;
+			clock-latency-ns = <290000>;
+			turbo-mode;
+		};
+	};
+
+	cluster1_opp: opp_table1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <1050000 1045000 1055000>;
+			opp-microamp = <95000>;
+			clock-latency-ns = <400000>;
+			opp-suspend;
+		};
+		opp-1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+			opp-microvolt = <1075000>;
+			opp-microamp = <100000>;
+			clock-latency-ns = <400000>;
+		};
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <1100000 1010000 1110000>;
+			opp-microamp = <95000>;
+			clock-latency-ns = <400000>;
+			turbo-mode;
+		};
+	};
+};
+
+Example 4: Handling multiple regulators
+
+/ {
+	cpus {
+		cpu@0 {
+			compatible = "vendor,cpu-type";
+			...
+
+			vcc0-supply = <&cpu_supply0>;
+			vcc1-supply = <&cpu_supply1>;
+			vcc2-supply = <&cpu_supply2>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+	};
+
+	cpu0_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <970000>, /* Supply 0 */
+					<960000>, /* Supply 1 */
+					<960000>; /* Supply 2 */
+			opp-microamp =  <70000>,  /* Supply 0 */
+					<70000>,  /* Supply 1 */
+					<70000>;  /* Supply 2 */
+			clock-latency-ns = <300000>;
+		};
+
+		/* OR */
+
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <975000 970000 985000>, /* Supply 0 */
+					<965000 960000 975000>, /* Supply 1 */
+					<965000 960000 975000>; /* Supply 2 */
+			opp-microamp =  <70000>,		/* Supply 0 */
+					<70000>,		/* Supply 1 */
+					<70000>;		/* Supply 2 */
+			clock-latency-ns = <300000>;
+		};
+
+		/* OR */
+
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <975000 970000 985000>, /* Supply 0 */
+					<965000 960000 975000>, /* Supply 1 */
+					<965000 960000 975000>; /* Supply 2 */
+			opp-microamp =  <70000>,		/* Supply 0 */
+					<0>,			/* Supply 1 doesn't need this */
+					<70000>;		/* Supply 2 */
+			clock-latency-ns = <300000>;
+		};
+	};
+};
+
+Example 5: opp-supported-hw
+(example: three level hierarchy of versions: cuts, substrate and process)
+
+/ {
+	cpus {
+		cpu@0 {
+			compatible = "arm,cortex-a7";
+			...
+
+			cpu-supply = <&cpu_supply>
+			operating-points-v2 = <&cpu0_opp_table_slow>;
+		};
+	};
+
+	opp_table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-600000000 {
+			/*
+			 * Supports all substrate and process versions for 0xF
+			 * cuts, i.e. only first four cuts.
+			 */
+			opp-supported-hw = <0xF 0xFFFFFFFF 0xFFFFFFFF>
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <915000 900000 925000>;
+			...
+		};
+
+		opp-800000000 {
+			/*
+			 * Supports:
+			 * - cuts: only one, 6th cut (represented by 6th bit).
+			 * - substrate: supports 16 different substrate versions
+			 * - process: supports 9 different process versions
+			 */
+			opp-supported-hw = <0x20 0xff0000ff 0x0000f4f0>
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <915000 900000 925000>;
+			...
+		};
+	};
+};
+
+Example 6: opp-microvolt-<name>, opp-microamp-<name>:
+(example: device with two possible microvolt ranges: slow and fast)
+
+/ {
+	cpus {
+		cpu@0 {
+			compatible = "arm,cortex-a7";
+			...
+
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+	};
+
+	cpu0_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt-slow = <915000 900000 925000>;
+			opp-microvolt-fast = <975000 970000 985000>;
+			opp-microamp-slow =  <70000>;
+			opp-microamp-fast =  <71000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt-slow = <915000 900000 925000>, /* Supply vcc0 */
+					      <925000 910000 935000>; /* Supply vcc1 */
+			opp-microvolt-fast = <975000 970000 985000>, /* Supply vcc0 */
+					     <965000 960000 975000>; /* Supply vcc1 */
+			opp-microamp =  <70000>; /* Will be used for both slow/fast */
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/opp/ti-omap5-opp-supply.txt b/Documentation/devicetree/bindings/opp/ti-omap5-opp-supply.txt
new file mode 100644
index 000000000..832346e48
--- /dev/null
+++ b/Documentation/devicetree/bindings/opp/ti-omap5-opp-supply.txt
@@ -0,0 +1,63 @@
+Texas Instruments OMAP compatible OPP supply description
+
+OMAP5, DRA7, and AM57 family of SoCs have Class0 AVS eFuse registers which
+contain data that can be used to adjust voltages programmed for some of their
+supplies for more efficient operation. This binding provides the information
+needed to read these values and use them to program the main regulator during
+an OPP transitions.
+
+Also, some supplies may have an associated vbb-supply which is an Adaptive Body
+Bias regulator which much be transitioned in a specific sequence with regards
+to the vdd-supply and clk when making an OPP transition. By supplying two
+regulators to the device that will undergo OPP transitions we can make use
+of the multi regulator binding that is part of the OPP core described here [1]
+to describe both regulators needed by the platform.
+
+[1] Documentation/devicetree/bindings/opp/opp.txt
+
+Required Properties for Device Node:
+- vdd-supply: phandle to regulator controlling VDD supply
+- vbb-supply: phandle to regulator controlling Body Bias supply
+	      (Usually Adaptive Body Bias regulator)
+
+Required Properties for opp-supply node:
+- compatible: Should be one of:
+	"ti,omap-opp-supply" - basic OPP supply controlling VDD and VBB
+	"ti,omap5-opp-supply" - OMAP5+ optimized voltages in efuse(class0)VDD
+			    along with VBB
+	"ti,omap5-core-opp-supply" - OMAP5+ optimized voltages in efuse(class0) VDD
+			    but no VBB.
+- reg: Address and length of the efuse register set for the device (mandatory
+	only for "ti,omap5-opp-supply")
+- ti,efuse-settings: An array of u32 tuple items providing information about
+	optimized efuse configuration. Each item consists of the following:
+	volt: voltage in uV - reference voltage (OPP voltage)
+	efuse_offseet: efuse offset from reg where the optimized voltage is stored.
+- ti,absolute-max-voltage-uv: absolute maximum voltage for the OPP supply.
+
+Example:
+
+/* Device Node (CPU)  */
+cpus {
+	cpu0: cpu@0 {
+		device_type = "cpu";
+
+		...
+
+		vdd-supply = <&vcc>;
+		vbb-supply = <&abb_mpu>;
+	};
+};
+
+/* OMAP OPP Supply with Class0 registers */
+opp_supply_mpu: opp_supply@4a003b20 {
+	compatible = "ti,omap5-opp-supply";
+	reg = <0x4a003b20 0x8>;
+	ti,efuse-settings = <
+	/* uV   offset */
+	1060000 0x0
+	1160000 0x4
+	1210000 0x8
+	>;
+	ti,absolute-max-voltage-uv = <1500000>;
+};