Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 43 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/regulator/gpio-regulator.txt b/Documentation/devicetree/bindings/regulator/gpio-regulator.txt
new file mode 100644
index 000000000..1f496159e
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/gpio-regulator.txt
@@ -0,0 +1,43 @@
+GPIO controlled regulators
+
+Required properties:
+- compatible		: Must be "regulator-gpio".
+- regulator-name	: Defined in regulator.txt as optional, but required
+			  here.
+- states		: Selection of available voltages and GPIO configs.
+                          if there are no states, then use a fixed regulator
+
+Optional properties:
+- enable-gpio		: GPIO to use to enable/disable the regulator.
+- gpios			: GPIO group used to control voltage.
+- gpios-states		: gpios pin's initial states array. 0: LOW, 1: HIGH.
+			  defualt is LOW if nothing is specified.
+- startup-delay-us	: Startup time in microseconds.
+- enable-active-high	: Polarity of GPIO is active high (default is low).
+- regulator-type	: Specifies what is being regulated, must be either
+			  "voltage" or "current", defaults to voltage.
+
+Any property defined as part of the core regulator binding defined in
+regulator.txt can also be used.
+
+Example:
+
+	mmciv: gpio-regulator {
+		compatible = "regulator-gpio";
+
+		regulator-name = "mmci-gpio-supply";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2600000>;
+		regulator-boot-on;
+
+		enable-gpio = <&gpio0 23 0x4>;
+		gpios = <&gpio0 24 0x4
+			 &gpio0 25 0x4>;
+		states = <1800000 0x3
+			  2200000 0x2
+			  2600000 0x1
+			  2900000 0x0>;
+
+		startup-delay-us = <100000>;
+		enable-active-high;
+	};