Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 54 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/usb/keystone-usb.txt b/Documentation/devicetree/bindings/usb/keystone-usb.txt
new file mode 100644
index 000000000..f96e09f78
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/keystone-usb.txt
@@ -0,0 +1,54 @@
+TI Keystone Soc USB Controller
+
+DWC3 GLUE
+
+Required properties:
+ - compatible: should be "ti,keystone-dwc3".
+ - #address-cells, #size-cells : should be '1' if the device has sub-nodes
+   with 'reg' property.
+ - reg : Address and length of the register set for the USB subsystem on
+   the SOC.
+ - interrupts : The irq number of this device that is used to interrupt the
+   MPU.
+ - ranges: allows valid 1:1 translation between child's address space and
+   parent's address space.
+
+SoC-specific Required Properties:
+The following are mandatory properties for Keystone 2 66AK2HK, 66AK2L and 66AK2E
+SoCs only:
+
+- clocks:		Clock ID for USB functional clock.
+- clock-names:		Must be "usb".
+
+
+The following are mandatory properties for Keystone 2 66AK2G SoCs only:
+
+- power-domains:	Should contain a phandle to a PM domain provider node
+			and an args specifier containing the USB device id
+			value. This property is as per the binding,
+			Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
+
+Sub-nodes:
+The dwc3 core should be added as subnode to Keystone DWC3 glue.
+- dwc3 :
+   The binding details of dwc3 can be found in:
+   Documentation/devicetree/bindings/usb/dwc3.txt
+
+Example:
+	usb: usb@2680000 {
+		compatible = "ti,keystone-dwc3";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x2680000 0x10000>;
+		clocks = <&clkusb>;
+		clock-names = "usb";
+		interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
+		ranges;
+
+		dwc3@2690000 {
+			compatible = "synopsys,dwc3";
+			reg = <0x2690000 0x70000>;
+			interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
+			usb-phy = <&usb_phy>, <&usb_phy>;
+		};
+	};