Adding upstream version 4.19.304.upstream/4.19.304upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

2 files changed, 211 insertions, 173 deletions

diff --git a/arch/arc/include/asm/entry-arcv2.h b/arch/arc/include/asm/entry-arcv2.h
index 225e7df2d..0733752ce 100644
--- a/arch/arc/include/asm/entry-arcv2.h
+++ b/arch/arc/include/asm/entry-arcv2.h
@@ -7,232 +7,252 @@
 #include <asm/irqflags-arcv2.h>
 #include <asm/thread_info.h>	/* For THREAD_SIZE */
 
+/*
+ * Interrupt/Exception stack layout (pt_regs) for ARCv2
+ *   (End of struct aligned to end of page [unless nested])
+ *
+ *  INTERRUPT                          EXCEPTION
+ *
+ *    manual    ---------------------  manual
+ *              |      orig_r0      |
+ *              |      event/ECR    |
+ *              |      bta          |
+ *              |      user_r25     |
+ *              |      gp           |
+ *              |      fp           |
+ *              |      sp           |
+ *              |      r12          |
+ *              |      r30          |
+ *              |      r58          |
+ *              |      r59          |
+ *  hw autosave ---------------------
+ *    optional  |      r0           |
+ *              |      r1           |
+ *              ~                   ~
+ *              |      r9           |
+ *              |      r10          |
+ *              |      r11          |
+ *              |      blink        |
+ *              |      lpe          |
+ *              |      lps          |
+ *              |      lpc          |
+ *              |      ei base      |
+ *              |      ldi base     |
+ *              |      jli base     |
+ *              ---------------------
+ *  hw autosave |       pc / eret   |
+ *   mandatory  | stat32 / erstatus |
+ *              ---------------------
+ */
+
 /*------------------------------------------------------------------------*/
-.macro INTERRUPT_PROLOGUE	called_from
+.macro INTERRUPT_PROLOGUE
 
-	; Before jumping to Interrupt Vector, hardware micro-ops did following:
+	; (A) Before jumping to Interrupt Vector, hardware micro-ops did following:
 	;   1. SP auto-switched to kernel mode stack
-	;   2. STATUS32.Z flag set to U mode at time of interrupt (U:1, K:0)
-	;   3. Auto saved: r0-r11, blink, LPE,LPS,LPC, JLI,LDI,EI, PC, STAT32
+	;   2. STATUS32.Z flag set if in U mode at time of interrupt (U:1,K:0)
+	;   3. Auto save: (mandatory) Push PC and STAT32 on stack
+	;                 hardware does even if CONFIG_ARC_IRQ_NO_AUTOSAVE
+	;   4. Auto save: (optional) r0-r11, blink, LPE,LPS,LPC, JLI,LDI,EI
 	;
-	; Now manually save: r12, sp, fp, gp, r25
+	; (B) Manually saved some regs: r12,r25,r30, sp,fp,gp, ACCL pair
 
 #ifdef CONFIG_ARC_IRQ_NO_AUTOSAVE
-.ifnc \called_from, exception
-	st.as	r9, [sp, -10]	; save r9 in it's final stack slot
-	sub	sp, sp, 12	; skip JLI, LDI, EI
-
-	PUSH	lp_count
-	PUSHAX	lp_start
-	PUSHAX	lp_end
-	PUSH	blink
-
-	PUSH	r11
-	PUSH	r10
-
-	sub	sp, sp, 4	; skip r9
-
-	PUSH	r8
-	PUSH	r7
-	PUSH	r6
-	PUSH	r5
-	PUSH	r4
-	PUSH	r3
-	PUSH	r2
-	PUSH	r1
-	PUSH	r0
-.endif
-#endif
+	; carve pt_regs on stack (case #3), PC/STAT32 already on stack
+	sub	sp, sp, SZ_PT_REGS - 8
 
-#ifdef CONFIG_ARC_HAS_ACCL_REGS
-	PUSH	r59
-	PUSH	r58
+	__SAVE_REGFILE_HARD
+#else
+	; carve pt_regs on stack (case #4), which grew partially already
+	sub	sp, sp, PT_r0
 #endif
 
-	PUSH	r30
-	PUSH	r12
+	__SAVE_REGFILE_SOFT
+.endm
+
+/*------------------------------------------------------------------------*/
+.macro EXCEPTION_PROLOGUE
+
+	; (A) Before jumping to Exception Vector, hardware micro-ops did following:
+	;   1. SP auto-switched to kernel mode stack
+	;   2. STATUS32.Z flag set if in U mode at time of exception (U:1,K:0)
+	;
+	; (B) Manually save the complete reg file below
+
+	sub	sp, sp, SZ_PT_REGS	; carve pt_regs
+
+	; _HARD saves r10 clobbered by _SOFT as scratch hence comes first
+
+	__SAVE_REGFILE_HARD
+	__SAVE_REGFILE_SOFT
+
+	st	r0, [sp]	; orig_r0
+
+	lr	r10, [eret]
+	lr	r11, [erstatus]
+	ST2	r10, r11, PT_ret
+
+	lr	r10, [ecr]
+	lr	r11, [erbta]
+	ST2	r10, r11, PT_event
+	mov	r9, r10
+
+	; OUTPUT: r9 has ECR
+.endm
+
+/*------------------------------------------------------------------------
+ * This macro saves the registers manually which would normally be autosaved
+ * by hardware on taken interrupts. It is used by
+ *   - exception handlers (which don't have autosave)
+ *   - interrupt autosave disabled due to CONFIG_ARC_IRQ_NO_AUTOSAVE
+ */
+.macro __SAVE_REGFILE_HARD
+
+	ST2	r0,  r1,  PT_r0
+	ST2	r2,  r3,  PT_r2
+	ST2	r4,  r5,  PT_r4
+	ST2	r6,  r7,  PT_r6
+	ST2	r8,  r9,  PT_r8
+	ST2	r10, r11, PT_r10
+
+	st	blink, [sp, PT_blink]
+
+	lr	r10, [lp_end]
+	lr	r11, [lp_start]
+	ST2	r10, r11, PT_lpe
+
+	st	lp_count, [sp, PT_lpc]
+
+	; skip JLI, LDI, EI for now
+.endm
+
+/*------------------------------------------------------------------------
+ * This macros saves a bunch of other registers which can't be autosaved for
+ * various reasons:
+ *   - r12: the last caller saved scratch reg since hardware saves in pairs so r0-r11
+ *   - r30: free reg, used by gcc as scratch
+ *   - ACCL/ACCH pair when they exist
+ */
+.macro __SAVE_REGFILE_SOFT
+
+	ST2	gp, fp, PT_r26		; gp (r26), fp (r27)
+
+	st	r12, [sp, PT_sp + 4]
+	st	r30, [sp, PT_sp + 8]
 
 	; Saving pt_regs->sp correctly requires some extra work due to the way
 	; Auto stack switch works
 	;  - U mode: retrieve it from AUX_USER_SP
 	;  - K mode: add the offset from current SP where H/w starts auto push
 	;
-	; Utilize the fact that Z bit is set if Intr taken in U mode
-	mov.nz	r9, sp
-	add.nz	r9, r9, SZ_PT_REGS - PT_sp - 4
-	bnz	1f
+	; 1. Utilize the fact that Z bit is set if Intr taken in U mode
+	; 2. Upon entry SP is always saved (for any inspection, unwinding etc),
+	;    but on return, restored only if U mode
 
-	lr	r9, [AUX_USER_SP]
-1:
-	PUSH	r9	; SP
+	lr	r10, [AUX_USER_SP]	; U mode SP
+
+	; ISA requires ADD.nz to have same dest and src reg operands
+	mov.nz	r10, sp
+	add.nz	r10, r10, SZ_PT_REGS	; K mode SP
 
-	PUSH	fp
-	PUSH	gp
+	st	r10, [sp, PT_sp]	; SP (pt_regs->sp)
 
 #ifdef CONFIG_ARC_CURR_IN_REG
-	PUSH	r25			; user_r25
+	st	r25, [sp, PT_user_r25]
 	GET_CURR_TASK_ON_CPU	r25
-#else
-	sub	sp, sp, 4
 #endif
 
-.ifnc \called_from, exception
-	sub	sp, sp, 12	; BTA/ECR/orig_r0 placeholder per pt_regs
-.endif
+#ifdef CONFIG_ARC_HAS_ACCL_REGS
+	ST2	r58, r59, PT_sp + 12
+#endif
 
 .endm
 
 /*------------------------------------------------------------------------*/
-.macro INTERRUPT_EPILOGUE	called_from
+.macro __RESTORE_REGFILE_SOFT
 
-.ifnc \called_from, exception
-	add	sp, sp, 12	; skip BTA/ECR/orig_r0 placeholderss
-.endif
+	LD2	gp, fp, PT_r26		; gp (r26), fp (r27)
 
-#ifdef CONFIG_ARC_CURR_IN_REG
-	POP	r25
-#else
-	add	sp, sp, 4
-#endif
+	ld	r12, [sp, PT_sp + 4]
+	ld	r30, [sp, PT_sp + 8]
 
-	POP	gp
-	POP	fp
-
-	; Don't touch AUX_USER_SP if returning to K mode (Z bit set)
-	; (Z bit set on K mode is inverse of INTERRUPT_PROLOGUE)
-	add.z	sp, sp, 4
+	; Restore SP (into AUX_USER_SP) only if returning to U mode
+	;  - for K mode, it will be implicitly restored as stack is unwound
+	;  - Z flag set on K is inverse of what hardware does on interrupt entry
+	;    but that doesn't really matter
 	bz	1f
 
-	POPAX	AUX_USER_SP
+	ld	r10, [sp, PT_sp]	; SP (pt_regs->sp)
+	sr	r10, [AUX_USER_SP]
 1:
-	POP	r12
-	POP	r30
 
-#ifdef CONFIG_ARC_HAS_ACCL_REGS
-	POP	r58
-	POP	r59
+#ifdef CONFIG_ARC_CURR_IN_REG
+	ld	r25, [sp, PT_user_r25]
 #endif
 
-#ifdef CONFIG_ARC_IRQ_NO_AUTOSAVE
-.ifnc \called_from, exception
-	POP	r0
-	POP	r1
-	POP	r2
-	POP	r3
-	POP	r4
-	POP	r5
-	POP	r6
-	POP	r7
-	POP	r8
-	POP	r9
-	POP	r10
-	POP	r11
-
-	POP	blink
-	POPAX	lp_end
-	POPAX	lp_start
-
-	POP	r9
-	mov	lp_count, r9
-
-	add	sp, sp, 12	; skip JLI, LDI, EI
-	ld.as	r9, [sp, -10]	; reload r9 which got clobbered
-.endif
+#ifdef CONFIG_ARC_HAS_ACCL_REGS
+	LD2	r58, r59, PT_sp + 12
 #endif
+.endm
 
+/*------------------------------------------------------------------------*/
+.macro __RESTORE_REGFILE_HARD
+
+	ld	blink, [sp, PT_blink]
+
+	LD2	r10, r11, PT_lpe
+	sr	r10, [lp_end]
+	sr	r11, [lp_start]
+
+	ld	r10, [sp, PT_lpc]	; lp_count can't be target of LD
+	mov	lp_count, r10
+
+	LD2	r0,  r1,  PT_r0
+	LD2	r2,  r3,  PT_r2
+	LD2	r4,  r5,  PT_r4
+	LD2	r6,  r7,  PT_r6
+	LD2	r8,  r9,  PT_r8
+	LD2	r10, r11, PT_r10
 .endm
 
+
 /*------------------------------------------------------------------------*/
-.macro EXCEPTION_PROLOGUE
+.macro INTERRUPT_EPILOGUE
 
-	; Before jumping to Exception Vector, hardware micro-ops did following:
-	;   1. SP auto-switched to kernel mode stack
-	;   2. STATUS32.Z flag set to U mode at time of interrupt (U:1,K:0)
-	;
-	; Now manually save the complete reg file
-
-	PUSH	r9		; freeup a register: slot of erstatus
-
-	PUSHAX	eret
-	sub	sp, sp, 12	; skip JLI, LDI, EI
-	PUSH	lp_count
-	PUSHAX	lp_start
-	PUSHAX	lp_end
-	PUSH	blink
-
-	PUSH	r11
-	PUSH	r10
-
-	ld.as	r9,  [sp, 10]	; load stashed r9 (status32 stack slot)
-	lr	r10, [erstatus]
-	st.as	r10, [sp, 10]	; save status32 at it's right stack slot
-
-	PUSH	r9
-	PUSH	r8
-	PUSH	r7
-	PUSH	r6
-	PUSH	r5
-	PUSH	r4
-	PUSH	r3
-	PUSH	r2
-	PUSH	r1
-	PUSH	r0
-
-	; -- for interrupts, regs above are auto-saved by h/w in that order --
-	; Now do what ISR prologue does (manually save r12, sp, fp, gp, r25)
-	;
-	; Set Z flag if this was from U mode (expected by INTERRUPT_PROLOGUE)
-	; Although H/w exception micro-ops do set Z flag for U mode (just like
-	; for interrupts), it could get clobbered in case we soft land here from
-	; a TLB Miss exception handler (tlbex.S)
+	; INPUT: r0 has STAT32 of calling context
+	; INPUT: Z flag set if returning to K mode
 
-	and	r10, r10, STATUS_U_MASK
-	xor.f	0, r10, STATUS_U_MASK
+	; _SOFT clobbers r10 restored by _HARD hence the order
 
-	INTERRUPT_PROLOGUE  exception
+	__RESTORE_REGFILE_SOFT
 
-	PUSHAX	erbta
-	PUSHAX	ecr		; r9 contains ECR, expected by EV_Trap
+#ifdef CONFIG_ARC_IRQ_NO_AUTOSAVE
+	__RESTORE_REGFILE_HARD
+	add	sp, sp, SZ_PT_REGS - 8
+#else
+	add	sp, sp, PT_r0
+#endif
 
-	PUSH	r0		; orig_r0
 .endm
 
 /*------------------------------------------------------------------------*/
 .macro EXCEPTION_EPILOGUE
 
-	; Assumes r0 has PT_status32
-	btst   r0, STATUS_U_BIT	; Z flag set if K, used in INTERRUPT_EPILOGUE
-
-	add	sp, sp, 8	; orig_r0/ECR don't need restoring
-	POPAX	erbta
-
-	INTERRUPT_EPILOGUE  exception
+	; INPUT: r0 has STAT32 of calling context
 
-	POP	r0
-	POP	r1
-	POP	r2
-	POP	r3
-	POP	r4
-	POP	r5
-	POP	r6
-	POP	r7
-	POP	r8
-	POP	r9
-	POP	r10
-	POP	r11
+	btst	r0, STATUS_U_BIT	; Z flag set if K, used in restoring SP
 
-	POP	blink
-	POPAX	lp_end
-	POPAX	lp_start
+	ld	r10, [sp, PT_event + 4]
+	sr	r10, [erbta]
 
-	POP	r9
-	mov	lp_count, r9
+	LD2	r10, r11, PT_ret
+	sr	r10, [eret]
+	sr	r11, [erstatus]
 
-	add	sp, sp, 12	; skip JLI, LDI, EI
-	POPAX	eret
-	POPAX	erstatus
+	__RESTORE_REGFILE_SOFT
+	__RESTORE_REGFILE_HARD
 
-	ld.as	r9, [sp, -12]	; reload r9 which got clobbered
+	add	sp, sp, SZ_PT_REGS
 .endm
 
 .macro FAKE_RET_FROM_EXCPN
diff --git a/arch/arc/include/asm/linkage.h b/arch/arc/include/asm/linkage.h
index 07c8e1a6c..b89ca8b4d 100644
--- a/arch/arc/include/asm/linkage.h
+++ b/arch/arc/include/asm/linkage.h
@@ -11,12 +11,30 @@
 
 #include <asm/dwarf.h>
 
-#ifdef __ASSEMBLY__
-
 #define ASM_NL		 `	/* use '`' to mark new line in macro */
 #define __ALIGN		.align 4
 #define __ALIGN_STR	__stringify(__ALIGN)
 
+#ifdef __ASSEMBLY__
+
+.macro ST2 e, o, off
+#ifdef CONFIG_ARC_HAS_LL64
+	std	\e, [sp, \off]
+#else
+	st	\e, [sp, \off]
+	st	\o, [sp, \off+4]
+#endif
+.endm
+
+.macro LD2 e, o, off
+#ifdef CONFIG_ARC_HAS_LL64
+	ldd	\e, [sp, \off]
+#else
+	ld	\e, [sp, \off]
+	ld	\o, [sp, \off+4]
+#endif
+.endm
+
 /* annotation for data we want in DCCM - if enabled in .config */
 .macro ARCFP_DATA nm
 #ifdef CONFIG_ARC_HAS_DCCM