Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 134 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
new file mode 100644
index 000000000..bfdd38d6b
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
@@ -0,0 +1,134 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sun5i-reference-design-tablet.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Utoo P66";
+	compatible = "utoo,p66", "allwinner,sun5i-a13";
+
+	/* The P66 uses the uart pins as gpios */
+	aliases {
+		/delete-property/serial0;
+	};
+
+	chosen {
+		/delete-property/stdout-path;
+	};
+
+	i2c_lcd: i2c@0 {
+		/* The lcd panel i2c interface is hooked up via gpios */
+		compatible = "i2c-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_lcd_pins>;
+		gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>, /* PG12, sda */
+			<&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10, scl */
+		i2c-gpio,delay-us = <5>;
+	};
+};
+
+&backlight {
+	/* Note levels of 10 / 20% result in backlight off */
+	brightness-levels = <0 30 40 50 60 70 80 90 100>;
+	default-brightness-level = <6>;
+};
+
+&codec {
+	allwinner,pa-gpios = <&pio 6 3 GPIO_ACTIVE_HIGH>; /* PG3 */
+};
+
+&codec_pa_pin {
+	pins = "PG3";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+
+	mmccard: mmccard@0 {
+		reg = <0>;
+		compatible = "mmc-card";
+		broken-hpi;
+	};
+};
+
+&pio {
+	i2c_lcd_pins: i2c_lcd_pin@0 {
+		pins = "PG10", "PG12";
+		function = "gpio_out";
+		bias-pull-up;
+	};
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+};
+
+&touchscreen {
+	compatible = "chipone,icn8318";
+	reg = <0x40>;
+	/* The P66 uses a different EINT then the reference design */
+	interrupts = <6 9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */
+	/* The icn8318 binding expects wake-gpios instead of power-gpios */
+	wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+	touchscreen-size-x = <800>;
+	touchscreen-size-y = <480>;
+	touchscreen-inverted-x;
+	touchscreen-swapped-x-y;
+	status = "okay";
+};
+
+&uart1 {
+	/* The P66 uses the uart pins as gpios */
+	status = "disabled";
+};
+
+&usb0_vbus_pin_a {
+	pins = "PB4";
+};