Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 337 insertions, 0 deletions

diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
new file mode 100644
index 000000000..7d80a0ae7
--- /dev/null
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -0,0 +1,337 @@
+/*
+ * Copyright 2011-2013 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/cpu.h>
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/pm_opp.h>
+#include <linux/pci.h>
+#include <linux/phy.h>
+#include <linux/reboot.h>
+#include <linux/regmap.h>
+#include <linux/micrel_phy.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/system_misc.h>
+
+#include "common.h"
+#include "cpuidle.h"
+#include "hardware.h"
+
+/* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */
+static int ksz9021rn_phy_fixup(struct phy_device *phydev)
+{
+	if (IS_BUILTIN(CONFIG_PHYLIB)) {
+		/* min rx data delay */
+		phy_write(phydev, MICREL_KSZ9021_EXTREG_CTRL,
+			0x8000 | MICREL_KSZ9021_RGMII_RX_DATA_PAD_SCEW);
+		phy_write(phydev, MICREL_KSZ9021_EXTREG_DATA_WRITE, 0x0000);
+
+		/* max rx/tx clock delay, min rx/tx control delay */
+		phy_write(phydev, MICREL_KSZ9021_EXTREG_CTRL,
+			0x8000 | MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW);
+		phy_write(phydev, MICREL_KSZ9021_EXTREG_DATA_WRITE, 0xf0f0);
+		phy_write(phydev, MICREL_KSZ9021_EXTREG_CTRL,
+			MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW);
+	}
+
+	return 0;
+}
+
+static void mmd_write_reg(struct phy_device *dev, int device, int reg, int val)
+{
+	phy_write(dev, 0x0d, device);
+	phy_write(dev, 0x0e, reg);
+	phy_write(dev, 0x0d, (1 << 14) | device);
+	phy_write(dev, 0x0e, val);
+}
+
+static int ksz9031rn_phy_fixup(struct phy_device *dev)
+{
+	/*
+	 * min rx data delay, max rx/tx clock delay,
+	 * min rx/tx control delay
+	 */
+	mmd_write_reg(dev, 2, 4, 0);
+	mmd_write_reg(dev, 2, 5, 0);
+	mmd_write_reg(dev, 2, 8, 0x003ff);
+
+	return 0;
+}
+
+/*
+ * fixup for PLX PEX8909 bridge to configure GPIO1-7 as output High
+ * as they are used for slots1-7 PERST#
+ */
+static void ventana_pciesw_early_fixup(struct pci_dev *dev)
+{
+	u32 dw;
+
+	if (!of_machine_is_compatible("gw,ventana"))
+		return;
+
+	if (dev->devfn != 0)
+		return;
+
+	pci_read_config_dword(dev, 0x62c, &dw);
+	dw |= 0xaaa8; // GPIO1-7 outputs
+	pci_write_config_dword(dev, 0x62c, dw);
+
+	pci_read_config_dword(dev, 0x644, &dw);
+	dw |= 0xfe;   // GPIO1-7 output high
+	pci_write_config_dword(dev, 0x644, dw);
+
+	msleep(100);
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8609, ventana_pciesw_early_fixup);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8606, ventana_pciesw_early_fixup);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8604, ventana_pciesw_early_fixup);
+
+static int ar8031_phy_fixup(struct phy_device *dev)
+{
+	u16 val;
+
+	/* To enable AR8031 output a 125MHz clk from CLK_25M */
+	phy_write(dev, 0xd, 0x7);
+	phy_write(dev, 0xe, 0x8016);
+	phy_write(dev, 0xd, 0x4007);
+
+	val = phy_read(dev, 0xe);
+	val &= 0xffe3;
+	val |= 0x18;
+	phy_write(dev, 0xe, val);
+
+	/* introduce tx clock delay */
+	phy_write(dev, 0x1d, 0x5);
+	val = phy_read(dev, 0x1e);
+	val |= 0x0100;
+	phy_write(dev, 0x1e, val);
+
+	return 0;
+}
+
+#define PHY_ID_AR8031	0x004dd074
+
+static int ar8035_phy_fixup(struct phy_device *dev)
+{
+	u16 val;
+
+	/* Ar803x phy SmartEEE feature cause link status generates glitch,
+	 * which cause ethernet link down/up issue, so disable SmartEEE
+	 */
+	phy_write(dev, 0xd, 0x3);
+	phy_write(dev, 0xe, 0x805d);
+	phy_write(dev, 0xd, 0x4003);
+
+	val = phy_read(dev, 0xe);
+	phy_write(dev, 0xe, val & ~(1 << 8));
+
+	/*
+	 * Enable 125MHz clock from CLK_25M on the AR8031.  This
+	 * is fed in to the IMX6 on the ENET_REF_CLK (V22) pad.
+	 * Also, introduce a tx clock delay.
+	 *
+	 * This is the same as is the AR8031 fixup.
+	 */
+	ar8031_phy_fixup(dev);
+
+	/*check phy power*/
+	val = phy_read(dev, 0x0);
+	if (val & BMCR_PDOWN)
+		phy_write(dev, 0x0, val & ~BMCR_PDOWN);
+
+	return 0;
+}
+
+#define PHY_ID_AR8035 0x004dd072
+
+static void __init imx6q_enet_phy_init(void)
+{
+	if (IS_BUILTIN(CONFIG_PHYLIB)) {
+		phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
+				ksz9021rn_phy_fixup);
+		phy_register_fixup_for_uid(PHY_ID_KSZ9031, MICREL_PHY_ID_MASK,
+				ksz9031rn_phy_fixup);
+		phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffef,
+				ar8031_phy_fixup);
+		phy_register_fixup_for_uid(PHY_ID_AR8035, 0xffffffef,
+				ar8035_phy_fixup);
+	}
+}
+
+static void __init imx6q_1588_init(void)
+{
+	struct device_node *np;
+	struct clk *ptp_clk;
+	struct clk *enet_ref;
+	struct regmap *gpr;
+	u32 clksel;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-fec");
+	if (!np) {
+		pr_warn("%s: failed to find fec node\n", __func__);
+		return;
+	}
+
+	ptp_clk = of_clk_get(np, 2);
+	if (IS_ERR(ptp_clk)) {
+		pr_warn("%s: failed to get ptp clock\n", __func__);
+		goto put_node;
+	}
+
+	enet_ref = clk_get_sys(NULL, "enet_ref");
+	if (IS_ERR(enet_ref)) {
+		pr_warn("%s: failed to get enet clock\n", __func__);
+		goto put_ptp_clk;
+	}
+
+	/*
+	 * If enet_ref from ANATOP/CCM is the PTP clock source, we need to
+	 * set bit IOMUXC_GPR1[21].  Or the PTP clock must be from pad
+	 * (external OSC), and we need to clear the bit.
+	 */
+	clksel = clk_is_match(ptp_clk, enet_ref) ?
+				IMX6Q_GPR1_ENET_CLK_SEL_ANATOP :
+				IMX6Q_GPR1_ENET_CLK_SEL_PAD;
+	gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
+	if (!IS_ERR(gpr))
+		regmap_update_bits(gpr, IOMUXC_GPR1,
+				IMX6Q_GPR1_ENET_CLK_SEL_MASK,
+				clksel);
+	else
+		pr_err("failed to find fsl,imx6q-iomuxc-gpr regmap\n");
+
+	clk_put(enet_ref);
+put_ptp_clk:
+	clk_put(ptp_clk);
+put_node:
+	of_node_put(np);
+}
+
+static void __init imx6q_axi_init(void)
+{
+	struct regmap *gpr;
+	unsigned int mask;
+
+	gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
+	if (!IS_ERR(gpr)) {
+		/*
+		 * Enable the cacheable attribute of VPU and IPU
+		 * AXI transactions.
+		 */
+		mask = IMX6Q_GPR4_VPU_WR_CACHE_SEL |
+			IMX6Q_GPR4_VPU_RD_CACHE_SEL |
+			IMX6Q_GPR4_VPU_P_WR_CACHE_VAL |
+			IMX6Q_GPR4_VPU_P_RD_CACHE_VAL_MASK |
+			IMX6Q_GPR4_IPU_WR_CACHE_CTL |
+			IMX6Q_GPR4_IPU_RD_CACHE_CTL;
+		regmap_update_bits(gpr, IOMUXC_GPR4, mask, mask);
+
+		/* Increase IPU read QoS priority */
+		regmap_update_bits(gpr, IOMUXC_GPR6,
+				IMX6Q_GPR6_IPU1_ID00_RD_QOS_MASK |
+				IMX6Q_GPR6_IPU1_ID01_RD_QOS_MASK,
+				(0xf << 16) | (0x7 << 20));
+		regmap_update_bits(gpr, IOMUXC_GPR7,
+				IMX6Q_GPR7_IPU2_ID00_RD_QOS_MASK |
+				IMX6Q_GPR7_IPU2_ID01_RD_QOS_MASK,
+				(0xf << 16) | (0x7 << 20));
+	} else {
+		pr_warn("failed to find fsl,imx6q-iomuxc-gpr regmap\n");
+	}
+}
+
+static void __init imx6q_init_machine(void)
+{
+	struct device *parent;
+
+	if (cpu_is_imx6q() && imx_get_soc_revision() == IMX_CHIP_REVISION_2_0)
+		imx_print_silicon_rev("i.MX6QP", IMX_CHIP_REVISION_1_0);
+	else
+		imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q",
+				imx_get_soc_revision());
+
+	parent = imx_soc_device_init();
+	if (parent == NULL)
+		pr_warn("failed to initialize soc device\n");
+
+	imx6q_enet_phy_init();
+
+	of_platform_default_populate(NULL, NULL, parent);
+
+	imx_anatop_init();
+	cpu_is_imx6q() ?  imx6q_pm_init() : imx6dl_pm_init();
+	imx6q_1588_init();
+	imx6q_axi_init();
+}
+
+static void __init imx6q_init_late(void)
+{
+	/*
+	 * WAIT mode is broken on imx6 Dual/Quad revision 1.0 and 1.1 so
+	 * there is no point to run cpuidle on them.
+	 *
+	 * It does work on imx6 Solo/DualLite starting from 1.1
+	 */
+	if ((cpu_is_imx6q() && imx_get_soc_revision() > IMX_CHIP_REVISION_1_1) ||
+	    (cpu_is_imx6dl() && imx_get_soc_revision() > IMX_CHIP_REVISION_1_0))
+		imx6q_cpuidle_init();
+
+	if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ))
+		platform_device_register_simple("imx6q-cpufreq", -1, NULL, 0);
+}
+
+static void __init imx6q_map_io(void)
+{
+	debug_ll_io_init();
+	imx_scu_map_io();
+}
+
+static void __init imx6q_init_irq(void)
+{
+	imx_gpc_check_dt();
+	imx_init_revision_from_anatop();
+	imx_init_l2cache();
+	imx_src_init();
+	irqchip_init();
+	imx6_pm_ccm_init("fsl,imx6q-ccm");
+}
+
+static const char * const imx6q_dt_compat[] __initconst = {
+	"fsl,imx6dl",
+	"fsl,imx6q",
+	"fsl,imx6qp",
+	NULL,
+};
+
+DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad/DualLite (Device Tree)")
+	.l2c_aux_val 	= 0,
+	.l2c_aux_mask	= ~0,
+	.smp		= smp_ops(imx_smp_ops),
+	.map_io		= imx6q_map_io,
+	.init_irq	= imx6q_init_irq,
+	.init_machine	= imx6q_init_machine,
+	.init_late      = imx6q_init_late,
+	.dt_compat	= imx6q_dt_compat,
+MACHINE_END