Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 206 insertions, 0 deletions

diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts
new file mode 100644
index 000000000..d30f6eb8a
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts
@@ -0,0 +1,206 @@
+/*
+ * DTS File for HiSilicon Poplar Development Board
+ *
+ * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd.
+ *
+ * Released under the GPLv2 only.
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "hi3798cv200.dtsi"
+#include "poplar-pinctrl.dtsi"
+
+/ {
+	model = "HiSilicon Poplar Development Board";
+	compatible = "hisilicon,hi3798cv200-poplar", "hisilicon,hi3798cv200";
+
+	aliases {
+		serial0 = &uart0;
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user-led0 {
+			label = "USER-LED0";
+			gpios = <&gpio6 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		user-led1 {
+			label = "USER-LED1";
+			gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		user-led2 {
+			label = "USER-LED2";
+			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+			default-state = "off";
+		};
+
+		user-led3 {
+			label = "USER-LED3";
+			gpios = <&gpio10 6 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "cpu0";
+			default-state = "off";
+		};
+	};
+
+	reg_pcie: regulator-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3_PCIE0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio6 7 0>;
+		enable-active-high;
+	};
+};
+
+&ehci {
+	status = "okay";
+};
+
+&emmc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_pins_1 &emmc_pins_2
+		     &emmc_pins_3 &emmc_pins_4>;
+	fifo-depth = <256>;
+	clock-frequency = <200000000>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	non-removable;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&gmac1 {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	phy-handle = <&eth_phy1>;
+	phy-mode = "rgmii";
+	hisilicon,phy-reset-delays-us = <10000 10000 30000>;
+
+	eth_phy1: phy@3 {
+		reg = <3>;
+	};
+};
+
+&gpio1 {
+	status = "okay";
+	gpio-line-names = "GPIO-E",	"",
+			  "",		"",
+			  "",		"GPIO-F",
+			  "",		"GPIO-J";
+};
+
+&gpio2 {
+	status = "okay";
+	gpio-line-names = "GPIO-H",	"GPIO-I",
+			  "GPIO-L",	"GPIO-G",
+			  "GPIO-K",	"",
+			  "",		"";
+};
+
+&gpio3 {
+	status = "okay";
+	gpio-line-names = "",		"",
+			  "",		"",
+			  "GPIO-C",	"",
+			  "",		"GPIO-B";
+};
+
+&gpio4 {
+	status = "okay";
+	gpio-line-names = "",		"",
+			  "",		"",
+			  "",		"GPIO-D",
+			  "",		"";
+};
+
+&gpio5 {
+	status = "okay";
+	gpio-line-names = "",		"USER-LED-1",
+			  "USER-LED-2",	"",
+			  "",		"GPIO-A",
+			  "",		"";
+};
+
+&gpio6 {
+	status = "okay";
+	gpio-line-names = "",		"",
+			  "",		"USER-LED-0",
+			  "",		"",
+			  "",		"";
+};
+
+&gpio10 {
+	status = "okay";
+	gpio-line-names = "",		"",
+			  "",		"",
+			  "",		"",
+			  "USER-LED-3",	"";
+};
+
+&i2c0 {
+	status = "okay";
+	label = "LS-I2C0";
+};
+
+&i2c2 {
+	status = "okay";
+	label = "LS-I2C1";
+};
+
+&ir {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&pcie {
+	reset-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
+	vpcie-supply = <&reg_pcie>;
+	status = "okay";
+};
+
+&sd0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+	label = "LS-SPI0";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+	label = "LS-UART0";
+};
+/* No optional LS-UART1 on Low Speed Expansion Connector. */