Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 665 insertions, 0 deletions

diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c
new file mode 100644
index 000000000..db3104c9f
--- /dev/null
+++ b/arch/ia64/mm/discontig.c
@@ -0,0 +1,665 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2000, 2003 Silicon Graphics, Inc.  All rights reserved.
+ * Copyright (c) 2001 Intel Corp.
+ * Copyright (c) 2001 Tony Luck <tony.luck@intel.com>
+ * Copyright (c) 2002 NEC Corp.
+ * Copyright (c) 2002 Kimio Suganuma <k-suganuma@da.jp.nec.com>
+ * Copyright (c) 2004 Silicon Graphics, Inc
+ *	Russ Anderson <rja@sgi.com>
+ *	Jesse Barnes <jbarnes@sgi.com>
+ *	Jack Steiner <steiner@sgi.com>
+ */
+
+/*
+ * Platform initialization for Discontig Memory
+ */
+
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/nmi.h>
+#include <linux/swap.h>
+#include <linux/bootmem.h>
+#include <linux/memblock.h>
+#include <linux/acpi.h>
+#include <linux/efi.h>
+#include <linux/nodemask.h>
+#include <linux/slab.h>
+#include <asm/pgalloc.h>
+#include <asm/tlb.h>
+#include <asm/meminit.h>
+#include <asm/numa.h>
+#include <asm/sections.h>
+
+/*
+ * Track per-node information needed to setup the boot memory allocator, the
+ * per-node areas, and the real VM.
+ */
+struct early_node_data {
+	struct ia64_node_data *node_data;
+	unsigned long pernode_addr;
+	unsigned long pernode_size;
+	unsigned long min_pfn;
+	unsigned long max_pfn;
+};
+
+static struct early_node_data mem_data[MAX_NUMNODES] __initdata;
+static nodemask_t memory_less_mask __initdata;
+
+pg_data_t *pgdat_list[MAX_NUMNODES];
+
+/*
+ * To prevent cache aliasing effects, align per-node structures so that they
+ * start at addresses that are strided by node number.
+ */
+#define MAX_NODE_ALIGN_OFFSET	(32 * 1024 * 1024)
+#define NODEDATA_ALIGN(addr, node)						\
+	((((addr) + 1024*1024-1) & ~(1024*1024-1)) + 				\
+	     (((node)*PERCPU_PAGE_SIZE) & (MAX_NODE_ALIGN_OFFSET - 1)))
+
+/**
+ * build_node_maps - callback to setup mem_data structs for each node
+ * @start: physical start of range
+ * @len: length of range
+ * @node: node where this range resides
+ *
+ * Detect extents of each piece of memory that we wish to
+ * treat as a virtually contiguous block (i.e. each node). Each such block
+ * must start on an %IA64_GRANULE_SIZE boundary, so we round the address down
+ * if necessary.  Any non-existent pages will simply be part of the virtual
+ * memmap.
+ */
+static int __init build_node_maps(unsigned long start, unsigned long len,
+				  int node)
+{
+	unsigned long spfn, epfn, end = start + len;
+
+	epfn = GRANULEROUNDUP(end) >> PAGE_SHIFT;
+	spfn = GRANULEROUNDDOWN(start) >> PAGE_SHIFT;
+
+	if (!mem_data[node].min_pfn) {
+		mem_data[node].min_pfn = spfn;
+		mem_data[node].max_pfn = epfn;
+	} else {
+		mem_data[node].min_pfn = min(spfn, mem_data[node].min_pfn);
+		mem_data[node].max_pfn = max(epfn, mem_data[node].max_pfn);
+	}
+
+	return 0;
+}
+
+/**
+ * early_nr_cpus_node - return number of cpus on a given node
+ * @node: node to check
+ *
+ * Count the number of cpus on @node.  We can't use nr_cpus_node() yet because
+ * acpi_boot_init() (which builds the node_to_cpu_mask array) hasn't been
+ * called yet.  Note that node 0 will also count all non-existent cpus.
+ */
+static int early_nr_cpus_node(int node)
+{
+	int cpu, n = 0;
+
+	for_each_possible_early_cpu(cpu)
+		if (node == node_cpuid[cpu].nid)
+			n++;
+
+	return n;
+}
+
+/**
+ * compute_pernodesize - compute size of pernode data
+ * @node: the node id.
+ */
+static unsigned long compute_pernodesize(int node)
+{
+	unsigned long pernodesize = 0, cpus;
+
+	cpus = early_nr_cpus_node(node);
+	pernodesize += PERCPU_PAGE_SIZE * cpus;
+	pernodesize += node * L1_CACHE_BYTES;
+	pernodesize += L1_CACHE_ALIGN(sizeof(pg_data_t));
+	pernodesize += L1_CACHE_ALIGN(sizeof(struct ia64_node_data));
+	pernodesize += L1_CACHE_ALIGN(sizeof(pg_data_t));
+	pernodesize = PAGE_ALIGN(pernodesize);
+	return pernodesize;
+}
+
+/**
+ * per_cpu_node_setup - setup per-cpu areas on each node
+ * @cpu_data: per-cpu area on this node
+ * @node: node to setup
+ *
+ * Copy the static per-cpu data into the region we just set aside and then
+ * setup __per_cpu_offset for each CPU on this node.  Return a pointer to
+ * the end of the area.
+ */
+static void *per_cpu_node_setup(void *cpu_data, int node)
+{
+#ifdef CONFIG_SMP
+	int cpu;
+
+	for_each_possible_early_cpu(cpu) {
+		void *src = cpu == 0 ? __cpu0_per_cpu : __phys_per_cpu_start;
+
+		if (node != node_cpuid[cpu].nid)
+			continue;
+
+		memcpy(__va(cpu_data), src, __per_cpu_end - __per_cpu_start);
+		__per_cpu_offset[cpu] = (char *)__va(cpu_data) -
+			__per_cpu_start;
+
+		/*
+		 * percpu area for cpu0 is moved from the __init area
+		 * which is setup by head.S and used till this point.
+		 * Update ar.k3.  This move is ensures that percpu
+		 * area for cpu0 is on the correct node and its
+		 * virtual address isn't insanely far from other
+		 * percpu areas which is important for congruent
+		 * percpu allocator.
+		 */
+		if (cpu == 0)
+			ia64_set_kr(IA64_KR_PER_CPU_DATA,
+				    (unsigned long)cpu_data -
+				    (unsigned long)__per_cpu_start);
+
+		cpu_data += PERCPU_PAGE_SIZE;
+	}
+#endif
+	return cpu_data;
+}
+
+#ifdef CONFIG_SMP
+/**
+ * setup_per_cpu_areas - setup percpu areas
+ *
+ * Arch code has already allocated and initialized percpu areas.  All
+ * this function has to do is to teach the determined layout to the
+ * dynamic percpu allocator, which happens to be more complex than
+ * creating whole new ones using helpers.
+ */
+void __init setup_per_cpu_areas(void)
+{
+	struct pcpu_alloc_info *ai;
+	struct pcpu_group_info *uninitialized_var(gi);
+	unsigned int *cpu_map;
+	void *base;
+	unsigned long base_offset;
+	unsigned int cpu;
+	ssize_t static_size, reserved_size, dyn_size;
+	int node, prev_node, unit, nr_units, rc;
+
+	ai = pcpu_alloc_alloc_info(MAX_NUMNODES, nr_cpu_ids);
+	if (!ai)
+		panic("failed to allocate pcpu_alloc_info");
+	cpu_map = ai->groups[0].cpu_map;
+
+	/* determine base */
+	base = (void *)ULONG_MAX;
+	for_each_possible_cpu(cpu)
+		base = min(base,
+			   (void *)(__per_cpu_offset[cpu] + __per_cpu_start));
+	base_offset = (void *)__per_cpu_start - base;
+
+	/* build cpu_map, units are grouped by node */
+	unit = 0;
+	for_each_node(node)
+		for_each_possible_cpu(cpu)
+			if (node == node_cpuid[cpu].nid)
+				cpu_map[unit++] = cpu;
+	nr_units = unit;
+
+	/* set basic parameters */
+	static_size = __per_cpu_end - __per_cpu_start;
+	reserved_size = PERCPU_MODULE_RESERVE;
+	dyn_size = PERCPU_PAGE_SIZE - static_size - reserved_size;
+	if (dyn_size < 0)
+		panic("percpu area overflow static=%zd reserved=%zd\n",
+		      static_size, reserved_size);
+
+	ai->static_size		= static_size;
+	ai->reserved_size	= reserved_size;
+	ai->dyn_size		= dyn_size;
+	ai->unit_size		= PERCPU_PAGE_SIZE;
+	ai->atom_size		= PAGE_SIZE;
+	ai->alloc_size		= PERCPU_PAGE_SIZE;
+
+	/*
+	 * CPUs are put into groups according to node.  Walk cpu_map
+	 * and create new groups at node boundaries.
+	 */
+	prev_node = -1;
+	ai->nr_groups = 0;
+	for (unit = 0; unit < nr_units; unit++) {
+		cpu = cpu_map[unit];
+		node = node_cpuid[cpu].nid;
+
+		if (node == prev_node) {
+			gi->nr_units++;
+			continue;
+		}
+		prev_node = node;
+
+		gi = &ai->groups[ai->nr_groups++];
+		gi->nr_units		= 1;
+		gi->base_offset		= __per_cpu_offset[cpu] + base_offset;
+		gi->cpu_map		= &cpu_map[unit];
+	}
+
+	rc = pcpu_setup_first_chunk(ai, base);
+	if (rc)
+		panic("failed to setup percpu area (err=%d)", rc);
+
+	pcpu_free_alloc_info(ai);
+}
+#endif
+
+/**
+ * fill_pernode - initialize pernode data.
+ * @node: the node id.
+ * @pernode: physical address of pernode data
+ * @pernodesize: size of the pernode data
+ */
+static void __init fill_pernode(int node, unsigned long pernode,
+	unsigned long pernodesize)
+{
+	void *cpu_data;
+	int cpus = early_nr_cpus_node(node);
+
+	mem_data[node].pernode_addr = pernode;
+	mem_data[node].pernode_size = pernodesize;
+	memset(__va(pernode), 0, pernodesize);
+
+	cpu_data = (void *)pernode;
+	pernode += PERCPU_PAGE_SIZE * cpus;
+	pernode += node * L1_CACHE_BYTES;
+
+	pgdat_list[node] = __va(pernode);
+	pernode += L1_CACHE_ALIGN(sizeof(pg_data_t));
+
+	mem_data[node].node_data = __va(pernode);
+	pernode += L1_CACHE_ALIGN(sizeof(struct ia64_node_data));
+	pernode += L1_CACHE_ALIGN(sizeof(pg_data_t));
+
+	cpu_data = per_cpu_node_setup(cpu_data, node);
+
+	return;
+}
+
+/**
+ * find_pernode_space - allocate memory for memory map and per-node structures
+ * @start: physical start of range
+ * @len: length of range
+ * @node: node where this range resides
+ *
+ * This routine reserves space for the per-cpu data struct, the list of
+ * pg_data_ts and the per-node data struct.  Each node will have something like
+ * the following in the first chunk of addr. space large enough to hold it.
+ *
+ *    ________________________
+ *   |                        |
+ *   |~~~~~~~~~~~~~~~~~~~~~~~~| <-- NODEDATA_ALIGN(start, node) for the first
+ *   |    PERCPU_PAGE_SIZE *  |     start and length big enough
+ *   |    cpus_on_this_node   | Node 0 will also have entries for all non-existent cpus.
+ *   |------------------------|
+ *   |   local pg_data_t *    |
+ *   |------------------------|
+ *   |  local ia64_node_data  |
+ *   |------------------------|
+ *   |          ???           |
+ *   |________________________|
+ *
+ * Once this space has been set aside, the bootmem maps are initialized.  We
+ * could probably move the allocation of the per-cpu and ia64_node_data space
+ * outside of this function and use alloc_bootmem_node(), but doing it here
+ * is straightforward and we get the alignments we want so...
+ */
+static int __init find_pernode_space(unsigned long start, unsigned long len,
+				     int node)
+{
+	unsigned long spfn, epfn;
+	unsigned long pernodesize = 0, pernode;
+
+	spfn = start >> PAGE_SHIFT;
+	epfn = (start + len) >> PAGE_SHIFT;
+
+	/*
+	 * Make sure this memory falls within this node's usable memory
+	 * since we may have thrown some away in build_maps().
+	 */
+	if (spfn < mem_data[node].min_pfn || epfn > mem_data[node].max_pfn)
+		return 0;
+
+	/* Don't setup this node's local space twice... */
+	if (mem_data[node].pernode_addr)
+		return 0;
+
+	/*
+	 * Calculate total size needed, incl. what's necessary
+	 * for good alignment and alias prevention.
+	 */
+	pernodesize = compute_pernodesize(node);
+	pernode = NODEDATA_ALIGN(start, node);
+
+	/* Is this range big enough for what we want to store here? */
+	if (start + len > (pernode + pernodesize))
+		fill_pernode(node, pernode, pernodesize);
+
+	return 0;
+}
+
+/**
+ * reserve_pernode_space - reserve memory for per-node space
+ *
+ * Reserve the space used by the bootmem maps & per-node space in the boot
+ * allocator so that when we actually create the real mem maps we don't
+ * use their memory.
+ */
+static void __init reserve_pernode_space(void)
+{
+	unsigned long base, size;
+	int node;
+
+	for_each_online_node(node) {
+		if (node_isset(node, memory_less_mask))
+			continue;
+
+		/* Now the per-node space */
+		size = mem_data[node].pernode_size;
+		base = __pa(mem_data[node].pernode_addr);
+		memblock_reserve(base, size);
+	}
+}
+
+static void scatter_node_data(void)
+{
+	pg_data_t **dst;
+	int node;
+
+	/*
+	 * for_each_online_node() can't be used at here.
+	 * node_online_map is not set for hot-added nodes at this time,
+	 * because we are halfway through initialization of the new node's
+	 * structures.  If for_each_online_node() is used, a new node's
+	 * pg_data_ptrs will be not initialized. Instead of using it,
+	 * pgdat_list[] is checked.
+	 */
+	for_each_node(node) {
+		if (pgdat_list[node]) {
+			dst = LOCAL_DATA_ADDR(pgdat_list[node])->pg_data_ptrs;
+			memcpy(dst, pgdat_list, sizeof(pgdat_list));
+		}
+	}
+}
+
+/**
+ * initialize_pernode_data - fixup per-cpu & per-node pointers
+ *
+ * Each node's per-node area has a copy of the global pg_data_t list, so
+ * we copy that to each node here, as well as setting the per-cpu pointer
+ * to the local node data structure.  The active_cpus field of the per-node
+ * structure gets setup by the platform_cpu_init() function later.
+ */
+static void __init initialize_pernode_data(void)
+{
+	int cpu, node;
+
+	scatter_node_data();
+
+#ifdef CONFIG_SMP
+	/* Set the node_data pointer for each per-cpu struct */
+	for_each_possible_early_cpu(cpu) {
+		node = node_cpuid[cpu].nid;
+		per_cpu(ia64_cpu_info, cpu).node_data =
+			mem_data[node].node_data;
+	}
+#else
+	{
+		struct cpuinfo_ia64 *cpu0_cpu_info;
+		cpu = 0;
+		node = node_cpuid[cpu].nid;
+		cpu0_cpu_info = (struct cpuinfo_ia64 *)(__phys_per_cpu_start +
+			((char *)&ia64_cpu_info - __per_cpu_start));
+		cpu0_cpu_info->node_data = mem_data[node].node_data;
+	}
+#endif /* CONFIG_SMP */
+}
+
+/**
+ * memory_less_node_alloc - * attempt to allocate memory on the best NUMA slit
+ * 	node but fall back to any other node when __alloc_bootmem_node fails
+ *	for best.
+ * @nid: node id
+ * @pernodesize: size of this node's pernode data
+ */
+static void __init *memory_less_node_alloc(int nid, unsigned long pernodesize)
+{
+	void *ptr = NULL;
+	u8 best = 0xff;
+	int bestnode = -1, node, anynode = 0;
+
+	for_each_online_node(node) {
+		if (node_isset(node, memory_less_mask))
+			continue;
+		else if (node_distance(nid, node) < best) {
+			best = node_distance(nid, node);
+			bestnode = node;
+		}
+		anynode = node;
+	}
+
+	if (bestnode == -1)
+		bestnode = anynode;
+
+	ptr = __alloc_bootmem_node(pgdat_list[bestnode], pernodesize,
+		PERCPU_PAGE_SIZE, __pa(MAX_DMA_ADDRESS));
+
+	return ptr;
+}
+
+/**
+ * memory_less_nodes - allocate and initialize CPU only nodes pernode
+ *	information.
+ */
+static void __init memory_less_nodes(void)
+{
+	unsigned long pernodesize;
+	void *pernode;
+	int node;
+
+	for_each_node_mask(node, memory_less_mask) {
+		pernodesize = compute_pernodesize(node);
+		pernode = memory_less_node_alloc(node, pernodesize);
+		fill_pernode(node, __pa(pernode), pernodesize);
+	}
+
+	return;
+}
+
+/**
+ * find_memory - walk the EFI memory map and setup the bootmem allocator
+ *
+ * Called early in boot to setup the bootmem allocator, and to
+ * allocate the per-cpu and per-node structures.
+ */
+void __init find_memory(void)
+{
+	int node;
+
+	reserve_memory();
+	efi_memmap_walk(filter_memory, register_active_ranges);
+
+	if (num_online_nodes() == 0) {
+		printk(KERN_ERR "node info missing!\n");
+		node_set_online(0);
+	}
+
+	nodes_or(memory_less_mask, memory_less_mask, node_online_map);
+	min_low_pfn = -1;
+	max_low_pfn = 0;
+
+	/* These actually end up getting called by call_pernode_memory() */
+	efi_memmap_walk(filter_rsvd_memory, build_node_maps);
+	efi_memmap_walk(filter_rsvd_memory, find_pernode_space);
+	efi_memmap_walk(find_max_min_low_pfn, NULL);
+
+	for_each_online_node(node)
+		if (mem_data[node].min_pfn)
+			node_clear(node, memory_less_mask);
+
+	reserve_pernode_space();
+	memory_less_nodes();
+	initialize_pernode_data();
+
+	max_pfn = max_low_pfn;
+
+	find_initrd();
+}
+
+#ifdef CONFIG_SMP
+/**
+ * per_cpu_init - setup per-cpu variables
+ *
+ * find_pernode_space() does most of this already, we just need to set
+ * local_per_cpu_offset
+ */
+void *per_cpu_init(void)
+{
+	int cpu;
+	static int first_time = 1;
+
+	if (first_time) {
+		first_time = 0;
+		for_each_possible_early_cpu(cpu)
+			per_cpu(local_per_cpu_offset, cpu) = __per_cpu_offset[cpu];
+	}
+
+	return __per_cpu_start + __per_cpu_offset[smp_processor_id()];
+}
+#endif /* CONFIG_SMP */
+
+/**
+ * call_pernode_memory - use SRAT to call callback functions with node info
+ * @start: physical start of range
+ * @len: length of range
+ * @arg: function to call for each range
+ *
+ * efi_memmap_walk() knows nothing about layout of memory across nodes. Find
+ * out to which node a block of memory belongs.  Ignore memory that we cannot
+ * identify, and split blocks that run across multiple nodes.
+ *
+ * Take this opportunity to round the start address up and the end address
+ * down to page boundaries.
+ */
+void call_pernode_memory(unsigned long start, unsigned long len, void *arg)
+{
+	unsigned long rs, re, end = start + len;
+	void (*func)(unsigned long, unsigned long, int);
+	int i;
+
+	start = PAGE_ALIGN(start);
+	end &= PAGE_MASK;
+	if (start >= end)
+		return;
+
+	func = arg;
+
+	if (!num_node_memblks) {
+		/* No SRAT table, so assume one node (node 0) */
+		if (start < end)
+			(*func)(start, end - start, 0);
+		return;
+	}
+
+	for (i = 0; i < num_node_memblks; i++) {
+		rs = max(start, node_memblk[i].start_paddr);
+		re = min(end, node_memblk[i].start_paddr +
+			 node_memblk[i].size);
+
+		if (rs < re)
+			(*func)(rs, re - rs, node_memblk[i].nid);
+
+		if (re == end)
+			break;
+	}
+}
+
+/**
+ * paging_init - setup page tables
+ *
+ * paging_init() sets up the page tables for each node of the system and frees
+ * the bootmem allocator memory for general use.
+ */
+void __init paging_init(void)
+{
+	unsigned long max_dma;
+	unsigned long pfn_offset = 0;
+	unsigned long max_pfn = 0;
+	int node;
+	unsigned long max_zone_pfns[MAX_NR_ZONES];
+
+	max_dma = virt_to_phys((void *) MAX_DMA_ADDRESS) >> PAGE_SHIFT;
+
+	sparse_memory_present_with_active_regions(MAX_NUMNODES);
+	sparse_init();
+
+#ifdef CONFIG_VIRTUAL_MEM_MAP
+	VMALLOC_END -= PAGE_ALIGN(ALIGN(max_low_pfn, MAX_ORDER_NR_PAGES) *
+		sizeof(struct page));
+	vmem_map = (struct page *) VMALLOC_END;
+	efi_memmap_walk(create_mem_map_page_table, NULL);
+	printk("Virtual mem_map starts at 0x%p\n", vmem_map);
+#endif
+
+	for_each_online_node(node) {
+		pfn_offset = mem_data[node].min_pfn;
+
+#ifdef CONFIG_VIRTUAL_MEM_MAP
+		NODE_DATA(node)->node_mem_map = vmem_map + pfn_offset;
+#endif
+		if (mem_data[node].max_pfn > max_pfn)
+			max_pfn = mem_data[node].max_pfn;
+	}
+
+	memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
+#ifdef CONFIG_ZONE_DMA32
+	max_zone_pfns[ZONE_DMA32] = max_dma;
+#endif
+	max_zone_pfns[ZONE_NORMAL] = max_pfn;
+	free_area_init_nodes(max_zone_pfns);
+
+	zero_page_memmap_ptr = virt_to_page(ia64_imva(empty_zero_page));
+}
+
+#ifdef CONFIG_MEMORY_HOTPLUG
+pg_data_t *arch_alloc_nodedata(int nid)
+{
+	unsigned long size = compute_pernodesize(nid);
+
+	return kzalloc(size, GFP_KERNEL);
+}
+
+void arch_free_nodedata(pg_data_t *pgdat)
+{
+	kfree(pgdat);
+}
+
+void arch_refresh_nodedata(int update_node, pg_data_t *update_pgdat)
+{
+	pgdat_list[update_node] = update_pgdat;
+	scatter_node_data();
+}
+#endif
+
+#ifdef CONFIG_SPARSEMEM_VMEMMAP
+int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node,
+		struct vmem_altmap *altmap)
+{
+	return vmemmap_populate_basepages(start, end, node);
+}
+
+void vmemmap_free(unsigned long start, unsigned long end,
+		struct vmem_altmap *altmap)
+{
+}
+#endif