Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 326 insertions, 0 deletions

diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c
new file mode 100644
index 000000000..080d49b26
--- /dev/null
+++ b/arch/powerpc/mm/fsl_booke_mmu.c
@@ -0,0 +1,326 @@
+/*
+ * Modifications by Kumar Gala (galak@kernel.crashing.org) to support
+ * E500 Book E processors.
+ *
+ * Copyright 2004,2010 Freescale Semiconductor, Inc.
+ *
+ * This file contains the routines for initializing the MMU
+ * on the 4xx series of chips.
+ *  -- paulus
+ *
+ *  Derived from arch/ppc/mm/init.c:
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
+ *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
+ *    Copyright (C) 1996 Paul Mackerras
+ *
+ *  Derived from "arch/i386/mm/init.c"
+ *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/stddef.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/highmem.h>
+#include <linux/memblock.h>
+
+#include <asm/pgalloc.h>
+#include <asm/prom.h>
+#include <asm/io.h>
+#include <asm/mmu_context.h>
+#include <asm/pgtable.h>
+#include <asm/mmu.h>
+#include <linux/uaccess.h>
+#include <asm/smp.h>
+#include <asm/machdep.h>
+#include <asm/setup.h>
+#include <asm/paca.h>
+
+#include "mmu_decl.h"
+
+unsigned int tlbcam_index;
+
+#define NUM_TLBCAMS	(64)
+struct tlbcam TLBCAM[NUM_TLBCAMS];
+
+struct tlbcamrange {
+	unsigned long start;
+	unsigned long limit;
+	phys_addr_t phys;
+} tlbcam_addrs[NUM_TLBCAMS];
+
+unsigned long tlbcam_sz(int idx)
+{
+	return tlbcam_addrs[idx].limit - tlbcam_addrs[idx].start + 1;
+}
+
+#ifdef CONFIG_FSL_BOOKE
+/*
+ * Return PA for this VA if it is mapped by a CAM, or 0
+ */
+phys_addr_t v_block_mapped(unsigned long va)
+{
+	int b;
+	for (b = 0; b < tlbcam_index; ++b)
+		if (va >= tlbcam_addrs[b].start && va < tlbcam_addrs[b].limit)
+			return tlbcam_addrs[b].phys + (va - tlbcam_addrs[b].start);
+	return 0;
+}
+
+/*
+ * Return VA for a given PA or 0 if not mapped
+ */
+unsigned long p_block_mapped(phys_addr_t pa)
+{
+	int b;
+	for (b = 0; b < tlbcam_index; ++b)
+		if (pa >= tlbcam_addrs[b].phys
+			&& pa < (tlbcam_addrs[b].limit-tlbcam_addrs[b].start)
+		              +tlbcam_addrs[b].phys)
+			return tlbcam_addrs[b].start+(pa-tlbcam_addrs[b].phys);
+	return 0;
+}
+#endif
+
+/*
+ * Set up a variable-size TLB entry (tlbcam). The parameters are not checked;
+ * in particular size must be a power of 4 between 4k and the max supported by
+ * an implementation; max may further be limited by what can be represented in
+ * an unsigned long (for example, 32-bit implementations cannot support a 4GB
+ * size).
+ */
+static void settlbcam(int index, unsigned long virt, phys_addr_t phys,
+		unsigned long size, unsigned long flags, unsigned int pid)
+{
+	unsigned int tsize;
+
+	tsize = __ilog2(size) - 10;
+
+#if defined(CONFIG_SMP) || defined(CONFIG_PPC_E500MC)
+	if ((flags & _PAGE_NO_CACHE) == 0)
+		flags |= _PAGE_COHERENT;
+#endif
+
+	TLBCAM[index].MAS0 = MAS0_TLBSEL(1) | MAS0_ESEL(index) | MAS0_NV(index+1);
+	TLBCAM[index].MAS1 = MAS1_VALID | MAS1_IPROT | MAS1_TSIZE(tsize) | MAS1_TID(pid);
+	TLBCAM[index].MAS2 = virt & PAGE_MASK;
+
+	TLBCAM[index].MAS2 |= (flags & _PAGE_WRITETHRU) ? MAS2_W : 0;
+	TLBCAM[index].MAS2 |= (flags & _PAGE_NO_CACHE) ? MAS2_I : 0;
+	TLBCAM[index].MAS2 |= (flags & _PAGE_COHERENT) ? MAS2_M : 0;
+	TLBCAM[index].MAS2 |= (flags & _PAGE_GUARDED) ? MAS2_G : 0;
+	TLBCAM[index].MAS2 |= (flags & _PAGE_ENDIAN) ? MAS2_E : 0;
+
+	TLBCAM[index].MAS3 = (phys & MAS3_RPN) | MAS3_SX | MAS3_SR;
+	TLBCAM[index].MAS3 |= ((flags & _PAGE_RW) ? MAS3_SW : 0);
+	if (mmu_has_feature(MMU_FTR_BIG_PHYS))
+		TLBCAM[index].MAS7 = (u64)phys >> 32;
+
+	/* Below is unlikely -- only for large user pages or similar */
+	if (pte_user(__pte(flags))) {
+	   TLBCAM[index].MAS3 |= MAS3_UX | MAS3_UR;
+	   TLBCAM[index].MAS3 |= ((flags & _PAGE_RW) ? MAS3_UW : 0);
+	}
+
+	tlbcam_addrs[index].start = virt;
+	tlbcam_addrs[index].limit = virt + size - 1;
+	tlbcam_addrs[index].phys = phys;
+}
+
+unsigned long calc_cam_sz(unsigned long ram, unsigned long virt,
+			  phys_addr_t phys)
+{
+	unsigned int camsize = __ilog2(ram);
+	unsigned int align = __ffs(virt | phys);
+	unsigned long max_cam;
+
+	if ((mfspr(SPRN_MMUCFG) & MMUCFG_MAVN) == MMUCFG_MAVN_V1) {
+		/* Convert (4^max) kB to (2^max) bytes */
+		max_cam = ((mfspr(SPRN_TLB1CFG) >> 16) & 0xf) * 2 + 10;
+		camsize &= ~1U;
+		align &= ~1U;
+	} else {
+		/* Convert (2^max) kB to (2^max) bytes */
+		max_cam = __ilog2(mfspr(SPRN_TLB1PS)) + 10;
+	}
+
+	if (camsize > align)
+		camsize = align;
+	if (camsize > max_cam)
+		camsize = max_cam;
+
+	return 1UL << camsize;
+}
+
+static unsigned long map_mem_in_cams_addr(phys_addr_t phys, unsigned long virt,
+					unsigned long ram, int max_cam_idx,
+					bool dryrun)
+{
+	int i;
+	unsigned long amount_mapped = 0;
+
+	/* Calculate CAM values */
+	for (i = 0; ram && i < max_cam_idx; i++) {
+		unsigned long cam_sz;
+
+		cam_sz = calc_cam_sz(ram, virt, phys);
+		if (!dryrun)
+			settlbcam(i, virt, phys, cam_sz,
+				  pgprot_val(PAGE_KERNEL_X), 0);
+
+		ram -= cam_sz;
+		amount_mapped += cam_sz;
+		virt += cam_sz;
+		phys += cam_sz;
+	}
+
+	if (dryrun)
+		return amount_mapped;
+
+	loadcam_multi(0, i, max_cam_idx);
+	tlbcam_index = i;
+
+#ifdef CONFIG_PPC64
+	get_paca()->tcd.esel_next = i;
+	get_paca()->tcd.esel_max = mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY;
+	get_paca()->tcd.esel_first = i;
+#endif
+
+	return amount_mapped;
+}
+
+unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx, bool dryrun)
+{
+	unsigned long virt = PAGE_OFFSET;
+	phys_addr_t phys = memstart_addr;
+
+	return map_mem_in_cams_addr(phys, virt, ram, max_cam_idx, dryrun);
+}
+
+#ifdef CONFIG_PPC32
+
+#if defined(CONFIG_LOWMEM_CAM_NUM_BOOL) && (CONFIG_LOWMEM_CAM_NUM >= NUM_TLBCAMS)
+#error "LOWMEM_CAM_NUM must be less than NUM_TLBCAMS"
+#endif
+
+unsigned long __init mmu_mapin_ram(unsigned long top)
+{
+	return tlbcam_addrs[tlbcam_index - 1].limit - PAGE_OFFSET + 1;
+}
+
+/*
+ * MMU_init_hw does the chip-specific initialization of the MMU hardware.
+ */
+void __init MMU_init_hw(void)
+{
+	flush_instruction_cache();
+}
+
+void __init adjust_total_lowmem(void)
+{
+	unsigned long ram;
+	int i;
+
+	/* adjust lowmem size to __max_low_memory */
+	ram = min((phys_addr_t)__max_low_memory, (phys_addr_t)total_lowmem);
+
+	i = switch_to_as1();
+	__max_low_memory = map_mem_in_cams(ram, CONFIG_LOWMEM_CAM_NUM, false);
+	restore_to_as0(i, 0, 0, 1);
+
+	pr_info("Memory CAM mapping: ");
+	for (i = 0; i < tlbcam_index - 1; i++)
+		pr_cont("%lu/", tlbcam_sz(i) >> 20);
+	pr_cont("%lu Mb, residual: %dMb\n", tlbcam_sz(tlbcam_index - 1) >> 20,
+	        (unsigned int)((total_lowmem - __max_low_memory) >> 20));
+
+	memblock_set_current_limit(memstart_addr + __max_low_memory);
+}
+
+void setup_initial_memory_limit(phys_addr_t first_memblock_base,
+				phys_addr_t first_memblock_size)
+{
+	phys_addr_t limit = first_memblock_base + first_memblock_size;
+
+	/* 64M mapped initially according to head_fsl_booke.S */
+	memblock_set_current_limit(min_t(u64, limit, 0x04000000));
+}
+
+#ifdef CONFIG_RELOCATABLE
+int __initdata is_second_reloc;
+notrace void __init relocate_init(u64 dt_ptr, phys_addr_t start)
+{
+	unsigned long base = KERNELBASE;
+
+	kernstart_addr = start;
+	if (is_second_reloc) {
+		virt_phys_offset = PAGE_OFFSET - memstart_addr;
+		return;
+	}
+
+	/*
+	 * Relocatable kernel support based on processing of dynamic
+	 * relocation entries. Before we get the real memstart_addr,
+	 * We will compute the virt_phys_offset like this:
+	 * virt_phys_offset = stext.run - kernstart_addr
+	 *
+	 * stext.run = (KERNELBASE & ~0x3ffffff) +
+	 *				(kernstart_addr & 0x3ffffff)
+	 * When we relocate, we have :
+	 *
+	 *	(kernstart_addr & 0x3ffffff) = (stext.run & 0x3ffffff)
+	 *
+	 * hence:
+	 *  virt_phys_offset = (KERNELBASE & ~0x3ffffff) -
+	 *                              (kernstart_addr & ~0x3ffffff)
+	 *
+	 */
+	start &= ~0x3ffffff;
+	base &= ~0x3ffffff;
+	virt_phys_offset = base - start;
+	early_get_first_memblock_info(__va(dt_ptr), NULL);
+	/*
+	 * We now get the memstart_addr, then we should check if this
+	 * address is the same as what the PAGE_OFFSET map to now. If
+	 * not we have to change the map of PAGE_OFFSET to memstart_addr
+	 * and do a second relocation.
+	 */
+	if (start != memstart_addr) {
+		int n;
+		long offset = start - memstart_addr;
+
+		is_second_reloc = 1;
+		n = switch_to_as1();
+		/* map a 64M area for the second relocation */
+		if (memstart_addr > start)
+			map_mem_in_cams(0x4000000, CONFIG_LOWMEM_CAM_NUM,
+					false);
+		else
+			map_mem_in_cams_addr(start, PAGE_OFFSET + offset,
+					0x4000000, CONFIG_LOWMEM_CAM_NUM,
+					false);
+		restore_to_as0(n, offset, __va(dt_ptr), 1);
+		/* We should never reach here */
+		panic("Relocation error");
+	}
+}
+#endif
+#endif