Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 374 insertions, 0 deletions

diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c
new file mode 100644
index 000000000..d1fee2d35
--- /dev/null
+++ b/arch/powerpc/platforms/maple/setup.c
@@ -0,0 +1,374 @@
+/*
+ *  Maple (970 eval board) setup code
+ *
+ *  (c) Copyright 2004 Benjamin Herrenschmidt (benh@kernel.crashing.org),
+ *                     IBM Corp. 
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+#undef DEBUG
+
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/mm.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/user.h>
+#include <linux/tty.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/major.h>
+#include <linux/initrd.h>
+#include <linux/vt_kern.h>
+#include <linux/console.h>
+#include <linux/pci.h>
+#include <linux/adb.h>
+#include <linux/cuda.h>
+#include <linux/pmu.h>
+#include <linux/irq.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/serial.h>
+#include <linux/smp.h>
+#include <linux/bitops.h>
+#include <linux/of_device.h>
+#include <linux/memblock.h>
+
+#include <asm/processor.h>
+#include <asm/sections.h>
+#include <asm/prom.h>
+#include <asm/pgtable.h>
+#include <asm/io.h>
+#include <asm/pci-bridge.h>
+#include <asm/iommu.h>
+#include <asm/machdep.h>
+#include <asm/dma.h>
+#include <asm/cputable.h>
+#include <asm/time.h>
+#include <asm/mpic.h>
+#include <asm/rtas.h>
+#include <asm/udbg.h>
+#include <asm/nvram.h>
+
+#include "maple.h"
+
+#ifdef DEBUG
+#define DBG(fmt...) udbg_printf(fmt)
+#else
+#define DBG(fmt...)
+#endif
+
+static unsigned long maple_find_nvram_base(void)
+{
+	struct device_node *rtcs;
+	unsigned long result = 0;
+
+	/* find NVRAM device */
+	rtcs = of_find_compatible_node(NULL, "nvram", "AMD8111");
+	if (rtcs) {
+		struct resource r;
+		if (of_address_to_resource(rtcs, 0, &r)) {
+			printk(KERN_EMERG "Maple: Unable to translate NVRAM"
+			       " address\n");
+			goto bail;
+		}
+		if (!(r.flags & IORESOURCE_IO)) {
+			printk(KERN_EMERG "Maple: NVRAM address isn't PIO!\n");
+			goto bail;
+		}
+		result = r.start;
+	} else
+		printk(KERN_EMERG "Maple: Unable to find NVRAM\n");
+ bail:
+	of_node_put(rtcs);
+	return result;
+}
+
+static void __noreturn maple_restart(char *cmd)
+{
+	unsigned int maple_nvram_base;
+	const unsigned int *maple_nvram_offset, *maple_nvram_command;
+	struct device_node *sp;
+
+	maple_nvram_base = maple_find_nvram_base();
+	if (maple_nvram_base == 0)
+		goto fail;
+
+	/* find service processor device */
+	sp = of_find_node_by_name(NULL, "service-processor");
+	if (!sp) {
+		printk(KERN_EMERG "Maple: Unable to find Service Processor\n");
+		goto fail;
+	}
+	maple_nvram_offset = of_get_property(sp, "restart-addr", NULL);
+	maple_nvram_command = of_get_property(sp, "restart-value", NULL);
+	of_node_put(sp);
+
+	/* send command */
+	outb_p(*maple_nvram_command, maple_nvram_base + *maple_nvram_offset);
+	for (;;) ;
+ fail:
+	printk(KERN_EMERG "Maple: Manual Restart Required\n");
+	for (;;) ;
+}
+
+static void __noreturn maple_power_off(void)
+{
+	unsigned int maple_nvram_base;
+	const unsigned int *maple_nvram_offset, *maple_nvram_command;
+	struct device_node *sp;
+
+	maple_nvram_base = maple_find_nvram_base();
+	if (maple_nvram_base == 0)
+		goto fail;
+
+	/* find service processor device */
+	sp = of_find_node_by_name(NULL, "service-processor");
+	if (!sp) {
+		printk(KERN_EMERG "Maple: Unable to find Service Processor\n");
+		goto fail;
+	}
+	maple_nvram_offset = of_get_property(sp, "power-off-addr", NULL);
+	maple_nvram_command = of_get_property(sp, "power-off-value", NULL);
+	of_node_put(sp);
+
+	/* send command */
+	outb_p(*maple_nvram_command, maple_nvram_base + *maple_nvram_offset);
+	for (;;) ;
+ fail:
+	printk(KERN_EMERG "Maple: Manual Power-Down Required\n");
+	for (;;) ;
+}
+
+static void __noreturn maple_halt(void)
+{
+	maple_power_off();
+}
+
+#ifdef CONFIG_SMP
+static struct smp_ops_t maple_smp_ops = {
+	.probe		= smp_mpic_probe,
+	.message_pass	= smp_mpic_message_pass,
+	.kick_cpu	= smp_generic_kick_cpu,
+	.setup_cpu	= smp_mpic_setup_cpu,
+	.give_timebase	= smp_generic_give_timebase,
+	.take_timebase	= smp_generic_take_timebase,
+};
+#endif /* CONFIG_SMP */
+
+static void __init maple_use_rtas_reboot_and_halt_if_present(void)
+{
+	if (rtas_service_present("system-reboot") &&
+	    rtas_service_present("power-off")) {
+		ppc_md.restart = rtas_restart;
+		pm_power_off = rtas_power_off;
+		ppc_md.halt = rtas_halt;
+	}
+}
+
+static void __init maple_setup_arch(void)
+{
+	/* init to some ~sane value until calibrate_delay() runs */
+	loops_per_jiffy = 50000000;
+
+	/* Setup SMP callback */
+#ifdef CONFIG_SMP
+	smp_ops = &maple_smp_ops;
+#endif
+	/* Lookup PCI hosts */
+       	maple_pci_init();
+
+#ifdef CONFIG_DUMMY_CONSOLE
+	conswitchp = &dummy_con;
+#endif
+	maple_use_rtas_reboot_and_halt_if_present();
+
+	printk(KERN_DEBUG "Using native/NAP idle loop\n");
+
+	mmio_nvram_init();
+}
+
+/*
+ * This is almost identical to pSeries and CHRP. We need to make that
+ * code generic at one point, with appropriate bits in the device-tree to
+ * identify the presence of an HT APIC
+ */
+static void __init maple_init_IRQ(void)
+{
+	struct device_node *root, *np, *mpic_node = NULL;
+	const unsigned int *opprop;
+	unsigned long openpic_addr = 0;
+	int naddr, n, i, opplen, has_isus = 0;
+	struct mpic *mpic;
+	unsigned int flags = 0;
+
+	/* Locate MPIC in the device-tree. Note that there is a bug
+	 * in Maple device-tree where the type of the controller is
+	 * open-pic and not interrupt-controller
+	 */
+
+	for_each_node_by_type(np, "interrupt-controller")
+		if (of_device_is_compatible(np, "open-pic")) {
+			mpic_node = np;
+			break;
+		}
+	if (mpic_node == NULL)
+		for_each_node_by_type(np, "open-pic") {
+			mpic_node = np;
+			break;
+		}
+	if (mpic_node == NULL) {
+		printk(KERN_ERR
+		       "Failed to locate the MPIC interrupt controller\n");
+		return;
+	}
+
+	/* Find address list in /platform-open-pic */
+	root = of_find_node_by_path("/");
+	naddr = of_n_addr_cells(root);
+	opprop = of_get_property(root, "platform-open-pic", &opplen);
+	if (opprop != 0) {
+		openpic_addr = of_read_number(opprop, naddr);
+		has_isus = (opplen > naddr);
+		printk(KERN_DEBUG "OpenPIC addr: %lx, has ISUs: %d\n",
+		       openpic_addr, has_isus);
+	}
+
+	BUG_ON(openpic_addr == 0);
+
+	/* Check for a big endian MPIC */
+	if (of_get_property(np, "big-endian", NULL) != NULL)
+		flags |= MPIC_BIG_ENDIAN;
+
+	/* XXX Maple specific bits */
+	flags |= MPIC_U3_HT_IRQS;
+	/* All U3/U4 are big-endian, older SLOF firmware doesn't encode this */
+	flags |= MPIC_BIG_ENDIAN;
+
+	/* Setup the openpic driver. More device-tree junks, we hard code no
+	 * ISUs for now. I'll have to revisit some stuffs with the folks doing
+	 * the firmware for those
+	 */
+	mpic = mpic_alloc(mpic_node, openpic_addr, flags,
+			  /*has_isus ? 16 :*/ 0, 0, " MPIC     ");
+	BUG_ON(mpic == NULL);
+
+	/* Add ISUs */
+	opplen /= sizeof(u32);
+	for (n = 0, i = naddr; i < opplen; i += naddr, n++) {
+		unsigned long isuaddr = of_read_number(opprop + i, naddr);
+		mpic_assign_isu(mpic, n, isuaddr);
+	}
+
+	/* All ISUs are setup, complete initialization */
+	mpic_init(mpic);
+	ppc_md.get_irq = mpic_get_irq;
+	of_node_put(mpic_node);
+	of_node_put(root);
+}
+
+static void __init maple_progress(char *s, unsigned short hex)
+{
+	printk("*** %04x : %s\n", hex, s ? s : "");
+}
+
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init maple_probe(void)
+{
+	if (!of_machine_is_compatible("Momentum,Maple") &&
+	    !of_machine_is_compatible("Momentum,Apache"))
+		return 0;
+
+	pm_power_off = maple_power_off;
+
+	iommu_init_early_dart(&maple_pci_controller_ops);
+
+	return 1;
+}
+
+#ifdef CONFIG_EDAC
+/*
+ * Register a platform device for CPC925 memory controller on
+ * all boards with U3H (CPC925) bridge.
+ */
+static int __init maple_cpc925_edac_setup(void)
+{
+	struct platform_device *pdev;
+	struct device_node *np = NULL;
+	struct resource r;
+	int ret;
+	volatile void __iomem *mem;
+	u32 rev;
+
+	np = of_find_node_by_type(NULL, "memory-controller");
+	if (!np) {
+		printk(KERN_ERR "%s: Unable to find memory-controller node\n",
+			__func__);
+		return -ENODEV;
+	}
+
+	ret = of_address_to_resource(np, 0, &r);
+	of_node_put(np);
+
+	if (ret < 0) {
+		printk(KERN_ERR "%s: Unable to get memory-controller reg\n",
+			__func__);
+		return -ENODEV;
+	}
+
+	mem = ioremap(r.start, resource_size(&r));
+	if (!mem) {
+		printk(KERN_ERR "%s: Unable to map memory-controller memory\n",
+				__func__);
+		return -ENOMEM;
+	}
+
+	rev = __raw_readl(mem);
+	iounmap(mem);
+
+	if (rev < 0x34 || rev > 0x3f) { /* U3H */
+		printk(KERN_ERR "%s: Non-CPC925(U3H) bridge revision: %02x\n",
+			__func__, rev);
+		return 0;
+	}
+
+	pdev = platform_device_register_simple("cpc925_edac", 0, &r, 1);
+	if (IS_ERR(pdev))
+		return PTR_ERR(pdev);
+
+	printk(KERN_INFO "%s: CPC925 platform device created\n", __func__);
+
+	return 0;
+}
+machine_device_initcall(maple, maple_cpc925_edac_setup);
+#endif
+
+define_machine(maple) {
+	.name			= "Maple",
+	.probe			= maple_probe,
+	.setup_arch		= maple_setup_arch,
+	.init_IRQ		= maple_init_IRQ,
+	.pci_irq_fixup		= maple_pci_irq_fixup,
+	.pci_get_legacy_ide_irq	= maple_pci_get_legacy_ide_irq,
+	.restart		= maple_restart,
+	.halt			= maple_halt,
+	.get_boot_time		= maple_get_boot_time,
+	.set_rtc_time		= maple_set_rtc_time,
+	.get_rtc_time		= maple_get_rtc_time,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= maple_progress,
+	.power_save		= power4_idle,
+};