Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1033 insertions, 0 deletions

diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
new file mode 100644
index 000000000..447da6db4
--- /dev/null
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -0,0 +1,1033 @@
+/*
+ * SMP support for power macintosh.
+ *
+ * We support both the old "powersurge" SMP architecture
+ * and the current Core99 (G4 PowerMac) machines.
+ *
+ * Note that we don't support the very first rev. of
+ * Apple/DayStar 2 CPUs board, the one with the funky
+ * watchdog. Hopefully, none of these should be there except
+ * maybe internally to Apple. I should probably still add some
+ * code to detect this card though and disable SMP. --BenH.
+ *
+ * Support Macintosh G4 SMP by Troy Benjegerdes (hozer@drgw.net)
+ * and Ben Herrenschmidt <benh@kernel.crashing.org>.
+ *
+ * Support for DayStar quad CPU cards
+ * Copyright (C) XLR8, Inc. 1994-2000
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/sched/hotplug.h>
+#include <linux/smp.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/hardirq.h>
+#include <linux/cpu.h>
+#include <linux/compiler.h>
+
+#include <asm/ptrace.h>
+#include <linux/atomic.h>
+#include <asm/code-patching.h>
+#include <asm/irq.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/sections.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/smp.h>
+#include <asm/machdep.h>
+#include <asm/pmac_feature.h>
+#include <asm/time.h>
+#include <asm/mpic.h>
+#include <asm/cacheflush.h>
+#include <asm/keylargo.h>
+#include <asm/pmac_low_i2c.h>
+#include <asm/pmac_pfunc.h>
+
+#include "pmac.h"
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(fmt...) udbg_printf(fmt)
+#else
+#define DBG(fmt...)
+#endif
+
+extern void __secondary_start_pmac_0(void);
+
+static void (*pmac_tb_freeze)(int freeze);
+static u64 timebase;
+static int tb_req;
+
+#ifdef CONFIG_PPC_PMAC32_PSURGE
+
+/*
+ * Powersurge (old powermac SMP) support.
+ */
+
+/* Addresses for powersurge registers */
+#define HAMMERHEAD_BASE		0xf8000000
+#define HHEAD_CONFIG		0x90
+#define HHEAD_SEC_INTR		0xc0
+
+/* register for interrupting the primary processor on the powersurge */
+/* N.B. this is actually the ethernet ROM! */
+#define PSURGE_PRI_INTR		0xf3019000
+
+/* register for storing the start address for the secondary processor */
+/* N.B. this is the PCI config space address register for the 1st bridge */
+#define PSURGE_START		0xf2800000
+
+/* Daystar/XLR8 4-CPU card */
+#define PSURGE_QUAD_REG_ADDR	0xf8800000
+
+#define PSURGE_QUAD_IRQ_SET	0
+#define PSURGE_QUAD_IRQ_CLR	1
+#define PSURGE_QUAD_IRQ_PRIMARY	2
+#define PSURGE_QUAD_CKSTOP_CTL	3
+#define PSURGE_QUAD_PRIMARY_ARB	4
+#define PSURGE_QUAD_BOARD_ID	6
+#define PSURGE_QUAD_WHICH_CPU	7
+#define PSURGE_QUAD_CKSTOP_RDBK	8
+#define PSURGE_QUAD_RESET_CTL	11
+
+#define PSURGE_QUAD_OUT(r, v)	(out_8(quad_base + ((r) << 4) + 4, (v)))
+#define PSURGE_QUAD_IN(r)	(in_8(quad_base + ((r) << 4) + 4) & 0x0f)
+#define PSURGE_QUAD_BIS(r, v)	(PSURGE_QUAD_OUT((r), PSURGE_QUAD_IN(r) | (v)))
+#define PSURGE_QUAD_BIC(r, v)	(PSURGE_QUAD_OUT((r), PSURGE_QUAD_IN(r) & ~(v)))
+
+/* virtual addresses for the above */
+static volatile u8 __iomem *hhead_base;
+static volatile u8 __iomem *quad_base;
+static volatile u32 __iomem *psurge_pri_intr;
+static volatile u8 __iomem *psurge_sec_intr;
+static volatile u32 __iomem *psurge_start;
+
+/* values for psurge_type */
+#define PSURGE_NONE		-1
+#define PSURGE_DUAL		0
+#define PSURGE_QUAD_OKEE	1
+#define PSURGE_QUAD_COTTON	2
+#define PSURGE_QUAD_ICEGRASS	3
+
+/* what sort of powersurge board we have */
+static int psurge_type = PSURGE_NONE;
+
+/* irq for secondary cpus to report */
+static struct irq_domain *psurge_host;
+int psurge_secondary_virq;
+
+/*
+ * Set and clear IPIs for powersurge.
+ */
+static inline void psurge_set_ipi(int cpu)
+{
+	if (psurge_type == PSURGE_NONE)
+		return;
+	if (cpu == 0)
+		in_be32(psurge_pri_intr);
+	else if (psurge_type == PSURGE_DUAL)
+		out_8(psurge_sec_intr, 0);
+	else
+		PSURGE_QUAD_OUT(PSURGE_QUAD_IRQ_SET, 1 << cpu);
+}
+
+static inline void psurge_clr_ipi(int cpu)
+{
+	if (cpu > 0) {
+		switch(psurge_type) {
+		case PSURGE_DUAL:
+			out_8(psurge_sec_intr, ~0);
+		case PSURGE_NONE:
+			break;
+		default:
+			PSURGE_QUAD_OUT(PSURGE_QUAD_IRQ_CLR, 1 << cpu);
+		}
+	}
+}
+
+/*
+ * On powersurge (old SMP powermac architecture) we don't have
+ * separate IPIs for separate messages like openpic does.  Instead
+ * use the generic demux helpers
+ *  -- paulus.
+ */
+static irqreturn_t psurge_ipi_intr(int irq, void *d)
+{
+	psurge_clr_ipi(smp_processor_id());
+	smp_ipi_demux();
+
+	return IRQ_HANDLED;
+}
+
+static void smp_psurge_cause_ipi(int cpu)
+{
+	psurge_set_ipi(cpu);
+}
+
+static int psurge_host_map(struct irq_domain *h, unsigned int virq,
+			 irq_hw_number_t hw)
+{
+	irq_set_chip_and_handler(virq, &dummy_irq_chip, handle_percpu_irq);
+
+	return 0;
+}
+
+static const struct irq_domain_ops psurge_host_ops = {
+	.map	= psurge_host_map,
+};
+
+static int psurge_secondary_ipi_init(void)
+{
+	int rc = -ENOMEM;
+
+	psurge_host = irq_domain_add_nomap(NULL, ~0, &psurge_host_ops, NULL);
+
+	if (psurge_host)
+		psurge_secondary_virq = irq_create_direct_mapping(psurge_host);
+
+	if (psurge_secondary_virq)
+		rc = request_irq(psurge_secondary_virq, psurge_ipi_intr,
+			IRQF_PERCPU | IRQF_NO_THREAD, "IPI", NULL);
+
+	if (rc)
+		pr_err("Failed to setup secondary cpu IPI\n");
+
+	return rc;
+}
+
+/*
+ * Determine a quad card presence. We read the board ID register, we
+ * force the data bus to change to something else, and we read it again.
+ * It it's stable, then the register probably exist (ugh !)
+ */
+static int __init psurge_quad_probe(void)
+{
+	int type;
+	unsigned int i;
+
+	type = PSURGE_QUAD_IN(PSURGE_QUAD_BOARD_ID);
+	if (type < PSURGE_QUAD_OKEE || type > PSURGE_QUAD_ICEGRASS
+	    || type != PSURGE_QUAD_IN(PSURGE_QUAD_BOARD_ID))
+		return PSURGE_DUAL;
+
+	/* looks OK, try a slightly more rigorous test */
+	/* bogus is not necessarily cacheline-aligned,
+	   though I don't suppose that really matters.  -- paulus */
+	for (i = 0; i < 100; i++) {
+		volatile u32 bogus[8];
+		bogus[(0+i)%8] = 0x00000000;
+		bogus[(1+i)%8] = 0x55555555;
+		bogus[(2+i)%8] = 0xFFFFFFFF;
+		bogus[(3+i)%8] = 0xAAAAAAAA;
+		bogus[(4+i)%8] = 0x33333333;
+		bogus[(5+i)%8] = 0xCCCCCCCC;
+		bogus[(6+i)%8] = 0xCCCCCCCC;
+		bogus[(7+i)%8] = 0x33333333;
+		wmb();
+		asm volatile("dcbf 0,%0" : : "r" (bogus) : "memory");
+		mb();
+		if (type != PSURGE_QUAD_IN(PSURGE_QUAD_BOARD_ID))
+			return PSURGE_DUAL;
+	}
+	return type;
+}
+
+static void __init psurge_quad_init(void)
+{
+	int procbits;
+
+	if (ppc_md.progress) ppc_md.progress("psurge_quad_init", 0x351);
+	procbits = ~PSURGE_QUAD_IN(PSURGE_QUAD_WHICH_CPU);
+	if (psurge_type == PSURGE_QUAD_ICEGRASS)
+		PSURGE_QUAD_BIS(PSURGE_QUAD_RESET_CTL, procbits);
+	else
+		PSURGE_QUAD_BIC(PSURGE_QUAD_CKSTOP_CTL, procbits);
+	mdelay(33);
+	out_8(psurge_sec_intr, ~0);
+	PSURGE_QUAD_OUT(PSURGE_QUAD_IRQ_CLR, procbits);
+	PSURGE_QUAD_BIS(PSURGE_QUAD_RESET_CTL, procbits);
+	if (psurge_type != PSURGE_QUAD_ICEGRASS)
+		PSURGE_QUAD_BIS(PSURGE_QUAD_CKSTOP_CTL, procbits);
+	PSURGE_QUAD_BIC(PSURGE_QUAD_PRIMARY_ARB, procbits);
+	mdelay(33);
+	PSURGE_QUAD_BIC(PSURGE_QUAD_RESET_CTL, procbits);
+	mdelay(33);
+	PSURGE_QUAD_BIS(PSURGE_QUAD_PRIMARY_ARB, procbits);
+	mdelay(33);
+}
+
+static void __init smp_psurge_probe(void)
+{
+	int i, ncpus;
+	struct device_node *dn;
+
+	/* We don't do SMP on the PPC601 -- paulus */
+	if (PVR_VER(mfspr(SPRN_PVR)) == 1)
+		return;
+
+	/*
+	 * The powersurge cpu board can be used in the generation
+	 * of powermacs that have a socket for an upgradeable cpu card,
+	 * including the 7500, 8500, 9500, 9600.
+	 * The device tree doesn't tell you if you have 2 cpus because
+	 * OF doesn't know anything about the 2nd processor.
+	 * Instead we look for magic bits in magic registers,
+	 * in the hammerhead memory controller in the case of the
+	 * dual-cpu powersurge board.  -- paulus.
+	 */
+	dn = of_find_node_by_name(NULL, "hammerhead");
+	if (dn == NULL)
+		return;
+	of_node_put(dn);
+
+	hhead_base = ioremap(HAMMERHEAD_BASE, 0x800);
+	quad_base = ioremap(PSURGE_QUAD_REG_ADDR, 1024);
+	psurge_sec_intr = hhead_base + HHEAD_SEC_INTR;
+
+	psurge_type = psurge_quad_probe();
+	if (psurge_type != PSURGE_DUAL) {
+		psurge_quad_init();
+		/* All released cards using this HW design have 4 CPUs */
+		ncpus = 4;
+		/* No sure how timebase sync works on those, let's use SW */
+		smp_ops->give_timebase = smp_generic_give_timebase;
+		smp_ops->take_timebase = smp_generic_take_timebase;
+	} else {
+		iounmap(quad_base);
+		if ((in_8(hhead_base + HHEAD_CONFIG) & 0x02) == 0) {
+			/* not a dual-cpu card */
+			iounmap(hhead_base);
+			psurge_type = PSURGE_NONE;
+			return;
+		}
+		ncpus = 2;
+	}
+
+	if (psurge_secondary_ipi_init())
+		return;
+
+	psurge_start = ioremap(PSURGE_START, 4);
+	psurge_pri_intr = ioremap(PSURGE_PRI_INTR, 4);
+
+	/* This is necessary because OF doesn't know about the
+	 * secondary cpu(s), and thus there aren't nodes in the
+	 * device tree for them, and smp_setup_cpu_maps hasn't
+	 * set their bits in cpu_present_mask.
+	 */
+	if (ncpus > NR_CPUS)
+		ncpus = NR_CPUS;
+	for (i = 1; i < ncpus ; ++i)
+		set_cpu_present(i, true);
+
+	if (ppc_md.progress) ppc_md.progress("smp_psurge_probe - done", 0x352);
+}
+
+static int __init smp_psurge_kick_cpu(int nr)
+{
+	unsigned long start = __pa(__secondary_start_pmac_0) + nr * 8;
+	unsigned long a, flags;
+	int i, j;
+
+	/* Defining this here is evil ... but I prefer hiding that
+	 * crap to avoid giving people ideas that they can do the
+	 * same.
+	 */
+	extern volatile unsigned int cpu_callin_map[NR_CPUS];
+
+	/* may need to flush here if secondary bats aren't setup */
+	for (a = KERNELBASE; a < KERNELBASE + 0x800000; a += 32)
+		asm volatile("dcbf 0,%0" : : "r" (a) : "memory");
+	asm volatile("sync");
+
+	if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu", 0x353);
+
+	/* This is going to freeze the timeebase, we disable interrupts */
+	local_irq_save(flags);
+
+	out_be32(psurge_start, start);
+	mb();
+
+	psurge_set_ipi(nr);
+
+	/*
+	 * We can't use udelay here because the timebase is now frozen.
+	 */
+	for (i = 0; i < 2000; ++i)
+		asm volatile("nop" : : : "memory");
+	psurge_clr_ipi(nr);
+
+	/*
+	 * Also, because the timebase is frozen, we must not return to the
+	 * caller which will try to do udelay's etc... Instead, we wait -here-
+	 * for the CPU to callin.
+	 */
+	for (i = 0; i < 100000 && !cpu_callin_map[nr]; ++i) {
+		for (j = 1; j < 10000; j++)
+			asm volatile("nop" : : : "memory");
+		asm volatile("sync" : : : "memory");
+	}
+	if (!cpu_callin_map[nr])
+		goto stuck;
+
+	/* And we do the TB sync here too for standard dual CPU cards */
+	if (psurge_type == PSURGE_DUAL) {
+		while(!tb_req)
+			barrier();
+		tb_req = 0;
+		mb();
+		timebase = get_tb();
+		mb();
+		while (timebase)
+			barrier();
+		mb();
+	}
+ stuck:
+	/* now interrupt the secondary, restarting both TBs */
+	if (psurge_type == PSURGE_DUAL)
+		psurge_set_ipi(1);
+
+	if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu - done", 0x354);
+
+	return 0;
+}
+
+static struct irqaction psurge_irqaction = {
+	.handler = psurge_ipi_intr,
+	.flags = IRQF_PERCPU | IRQF_NO_THREAD,
+	.name = "primary IPI",
+};
+
+static void __init smp_psurge_setup_cpu(int cpu_nr)
+{
+	if (cpu_nr != 0 || !psurge_start)
+		return;
+
+	/* reset the entry point so if we get another intr we won't
+	 * try to startup again */
+	out_be32(psurge_start, 0x100);
+	if (setup_irq(irq_create_mapping(NULL, 30), &psurge_irqaction))
+		printk(KERN_ERR "Couldn't get primary IPI interrupt");
+}
+
+void __init smp_psurge_take_timebase(void)
+{
+	if (psurge_type != PSURGE_DUAL)
+		return;
+
+	tb_req = 1;
+	mb();
+	while (!timebase)
+		barrier();
+	mb();
+	set_tb(timebase >> 32, timebase & 0xffffffff);
+	timebase = 0;
+	mb();
+	set_dec(tb_ticks_per_jiffy/2);
+}
+
+void __init smp_psurge_give_timebase(void)
+{
+	/* Nothing to do here */
+}
+
+/* PowerSurge-style Macs */
+struct smp_ops_t psurge_smp_ops = {
+	.message_pass	= NULL,	/* Use smp_muxed_ipi_message_pass */
+	.cause_ipi	= smp_psurge_cause_ipi,
+	.cause_nmi_ipi	= NULL,
+	.probe		= smp_psurge_probe,
+	.kick_cpu	= smp_psurge_kick_cpu,
+	.setup_cpu	= smp_psurge_setup_cpu,
+	.give_timebase	= smp_psurge_give_timebase,
+	.take_timebase	= smp_psurge_take_timebase,
+};
+#endif /* CONFIG_PPC_PMAC32_PSURGE */
+
+/*
+ * Core 99 and later support
+ */
+
+
+static void smp_core99_give_timebase(void)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	while(!tb_req)
+		barrier();
+	tb_req = 0;
+	(*pmac_tb_freeze)(1);
+	mb();
+	timebase = get_tb();
+	mb();
+	while (timebase)
+		barrier();
+	mb();
+	(*pmac_tb_freeze)(0);
+	mb();
+
+	local_irq_restore(flags);
+}
+
+
+static void smp_core99_take_timebase(void)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	tb_req = 1;
+	mb();
+	while (!timebase)
+		barrier();
+	mb();
+	set_tb(timebase >> 32, timebase & 0xffffffff);
+	timebase = 0;
+	mb();
+
+	local_irq_restore(flags);
+}
+
+#ifdef CONFIG_PPC64
+/*
+ * G5s enable/disable the timebase via an i2c-connected clock chip.
+ */
+static struct pmac_i2c_bus *pmac_tb_clock_chip_host;
+static u8 pmac_tb_pulsar_addr;
+
+static void smp_core99_cypress_tb_freeze(int freeze)
+{
+	u8 data;
+	int rc;
+
+	/* Strangely, the device-tree says address is 0xd2, but darwin
+	 * accesses 0xd0 ...
+	 */
+	pmac_i2c_setmode(pmac_tb_clock_chip_host,
+			 pmac_i2c_mode_combined);
+	rc = pmac_i2c_xfer(pmac_tb_clock_chip_host,
+			   0xd0 | pmac_i2c_read,
+			   1, 0x81, &data, 1);
+	if (rc != 0)
+		goto bail;
+
+	data = (data & 0xf3) | (freeze ? 0x00 : 0x0c);
+
+       	pmac_i2c_setmode(pmac_tb_clock_chip_host, pmac_i2c_mode_stdsub);
+	rc = pmac_i2c_xfer(pmac_tb_clock_chip_host,
+			   0xd0 | pmac_i2c_write,
+			   1, 0x81, &data, 1);
+
+ bail:
+	if (rc != 0) {
+		printk("Cypress Timebase %s rc: %d\n",
+		       freeze ? "freeze" : "unfreeze", rc);
+		panic("Timebase freeze failed !\n");
+	}
+}
+
+
+static void smp_core99_pulsar_tb_freeze(int freeze)
+{
+	u8 data;
+	int rc;
+
+	pmac_i2c_setmode(pmac_tb_clock_chip_host,
+			 pmac_i2c_mode_combined);
+	rc = pmac_i2c_xfer(pmac_tb_clock_chip_host,
+			   pmac_tb_pulsar_addr | pmac_i2c_read,
+			   1, 0x2e, &data, 1);
+	if (rc != 0)
+		goto bail;
+
+	data = (data & 0x88) | (freeze ? 0x11 : 0x22);
+
+	pmac_i2c_setmode(pmac_tb_clock_chip_host, pmac_i2c_mode_stdsub);
+	rc = pmac_i2c_xfer(pmac_tb_clock_chip_host,
+			   pmac_tb_pulsar_addr | pmac_i2c_write,
+			   1, 0x2e, &data, 1);
+ bail:
+	if (rc != 0) {
+		printk(KERN_ERR "Pulsar Timebase %s rc: %d\n",
+		       freeze ? "freeze" : "unfreeze", rc);
+		panic("Timebase freeze failed !\n");
+	}
+}
+
+static void __init smp_core99_setup_i2c_hwsync(int ncpus)
+{
+	struct device_node *cc = NULL;	
+	struct device_node *p;
+	const char *name = NULL;
+	const u32 *reg;
+	int ok;
+
+	/* Look for the clock chip */
+	for_each_node_by_name(cc, "i2c-hwclock") {
+		p = of_get_parent(cc);
+		ok = p && of_device_is_compatible(p, "uni-n-i2c");
+		of_node_put(p);
+		if (!ok)
+			continue;
+
+		pmac_tb_clock_chip_host = pmac_i2c_find_bus(cc);
+		if (pmac_tb_clock_chip_host == NULL)
+			continue;
+		reg = of_get_property(cc, "reg", NULL);
+		if (reg == NULL)
+			continue;
+		switch (*reg) {
+		case 0xd2:
+			if (of_device_is_compatible(cc,"pulsar-legacy-slewing")) {
+				pmac_tb_freeze = smp_core99_pulsar_tb_freeze;
+				pmac_tb_pulsar_addr = 0xd2;
+				name = "Pulsar";
+			} else if (of_device_is_compatible(cc, "cy28508")) {
+				pmac_tb_freeze = smp_core99_cypress_tb_freeze;
+				name = "Cypress";
+			}
+			break;
+		case 0xd4:
+			pmac_tb_freeze = smp_core99_pulsar_tb_freeze;
+			pmac_tb_pulsar_addr = 0xd4;
+			name = "Pulsar";
+			break;
+		}
+		if (pmac_tb_freeze != NULL)
+			break;
+	}
+	if (pmac_tb_freeze != NULL) {
+		/* Open i2c bus for synchronous access */
+		if (pmac_i2c_open(pmac_tb_clock_chip_host, 1)) {
+			printk(KERN_ERR "Failed top open i2c bus for clock"
+			       " sync, fallback to software sync !\n");
+			goto no_i2c_sync;
+		}
+		printk(KERN_INFO "Processor timebase sync using %s i2c clock\n",
+		       name);
+		return;
+	}
+ no_i2c_sync:
+	pmac_tb_freeze = NULL;
+	pmac_tb_clock_chip_host = NULL;
+}
+
+
+
+/*
+ * Newer G5s uses a platform function
+ */
+
+static void smp_core99_pfunc_tb_freeze(int freeze)
+{
+	struct device_node *cpus;
+	struct pmf_args args;
+
+	cpus = of_find_node_by_path("/cpus");
+	BUG_ON(cpus == NULL);
+	args.count = 1;
+	args.u[0].v = !freeze;
+	pmf_call_function(cpus, "cpu-timebase", &args);
+	of_node_put(cpus);
+}
+
+#else /* CONFIG_PPC64 */
+
+/*
+ * SMP G4 use a GPIO to enable/disable the timebase.
+ */
+
+static unsigned int core99_tb_gpio;	/* Timebase freeze GPIO */
+
+static void smp_core99_gpio_tb_freeze(int freeze)
+{
+	if (freeze)
+		pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, core99_tb_gpio, 4);
+	else
+		pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, core99_tb_gpio, 0);
+	pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, core99_tb_gpio, 0);
+}
+
+
+#endif /* !CONFIG_PPC64 */
+
+/* L2 and L3 cache settings to pass from CPU0 to CPU1 on G4 cpus */
+volatile static long int core99_l2_cache;
+volatile static long int core99_l3_cache;
+
+static void core99_init_caches(int cpu)
+{
+#ifndef CONFIG_PPC64
+	if (!cpu_has_feature(CPU_FTR_L2CR))
+		return;
+
+	if (cpu == 0) {
+		core99_l2_cache = _get_L2CR();
+		printk("CPU0: L2CR is %lx\n", core99_l2_cache);
+	} else {
+		printk("CPU%d: L2CR was %lx\n", cpu, _get_L2CR());
+		_set_L2CR(0);
+		_set_L2CR(core99_l2_cache);
+		printk("CPU%d: L2CR set to %lx\n", cpu, core99_l2_cache);
+	}
+
+	if (!cpu_has_feature(CPU_FTR_L3CR))
+		return;
+
+	if (cpu == 0){
+		core99_l3_cache = _get_L3CR();
+		printk("CPU0: L3CR is %lx\n", core99_l3_cache);
+	} else {
+		printk("CPU%d: L3CR was %lx\n", cpu, _get_L3CR());
+		_set_L3CR(0);
+		_set_L3CR(core99_l3_cache);
+		printk("CPU%d: L3CR set to %lx\n", cpu, core99_l3_cache);
+	}
+#endif /* !CONFIG_PPC64 */
+}
+
+static void __init smp_core99_setup(int ncpus)
+{
+#ifdef CONFIG_PPC64
+
+	/* i2c based HW sync on some G5s */
+	if (of_machine_is_compatible("PowerMac7,2") ||
+	    of_machine_is_compatible("PowerMac7,3") ||
+	    of_machine_is_compatible("RackMac3,1"))
+		smp_core99_setup_i2c_hwsync(ncpus);
+
+	/* pfunc based HW sync on recent G5s */
+	if (pmac_tb_freeze == NULL) {
+		struct device_node *cpus =
+			of_find_node_by_path("/cpus");
+		if (cpus &&
+		    of_get_property(cpus, "platform-cpu-timebase", NULL)) {
+			pmac_tb_freeze = smp_core99_pfunc_tb_freeze;
+			printk(KERN_INFO "Processor timebase sync using"
+			       " platform function\n");
+		}
+	}
+
+#else /* CONFIG_PPC64 */
+
+	/* GPIO based HW sync on ppc32 Core99 */
+	if (pmac_tb_freeze == NULL && !of_machine_is_compatible("MacRISC4")) {
+		struct device_node *cpu;
+		const u32 *tbprop = NULL;
+
+		core99_tb_gpio = KL_GPIO_TB_ENABLE;	/* default value */
+		cpu = of_find_node_by_type(NULL, "cpu");
+		if (cpu != NULL) {
+			tbprop = of_get_property(cpu, "timebase-enable", NULL);
+			if (tbprop)
+				core99_tb_gpio = *tbprop;
+			of_node_put(cpu);
+		}
+		pmac_tb_freeze = smp_core99_gpio_tb_freeze;
+		printk(KERN_INFO "Processor timebase sync using"
+		       " GPIO 0x%02x\n", core99_tb_gpio);
+	}
+
+#endif /* CONFIG_PPC64 */
+
+	/* No timebase sync, fallback to software */
+	if (pmac_tb_freeze == NULL) {
+		smp_ops->give_timebase = smp_generic_give_timebase;
+		smp_ops->take_timebase = smp_generic_take_timebase;
+		printk(KERN_INFO "Processor timebase sync using software\n");
+	}
+
+#ifndef CONFIG_PPC64
+	{
+		int i;
+
+		/* XXX should get this from reg properties */
+		for (i = 1; i < ncpus; ++i)
+			set_hard_smp_processor_id(i, i);
+	}
+#endif
+
+	/* 32 bits SMP can't NAP */
+	if (!of_machine_is_compatible("MacRISC4"))
+		powersave_nap = 0;
+}
+
+static void __init smp_core99_probe(void)
+{
+	struct device_node *cpus;
+	int ncpus = 0;
+
+	if (ppc_md.progress) ppc_md.progress("smp_core99_probe", 0x345);
+
+	/* Count CPUs in the device-tree */
+	for_each_node_by_type(cpus, "cpu")
+		++ncpus;
+
+	printk(KERN_INFO "PowerMac SMP probe found %d cpus\n", ncpus);
+
+	/* Nothing more to do if less than 2 of them */
+	if (ncpus <= 1)
+		return;
+
+	/* We need to perform some early initialisations before we can start
+	 * setting up SMP as we are running before initcalls
+	 */
+	pmac_pfunc_base_install();
+	pmac_i2c_init();
+
+	/* Setup various bits like timebase sync method, ability to nap, ... */
+	smp_core99_setup(ncpus);
+
+	/* Install IPIs */
+	mpic_request_ipis();
+
+	/* Collect l2cr and l3cr values from CPU 0 */
+	core99_init_caches(0);
+}
+
+static int smp_core99_kick_cpu(int nr)
+{
+	unsigned int save_vector;
+	unsigned long target, flags;
+	unsigned int *vector = (unsigned int *)(PAGE_OFFSET+0x100);
+
+	if (nr < 0 || nr > 3)
+		return -ENOENT;
+
+	if (ppc_md.progress)
+		ppc_md.progress("smp_core99_kick_cpu", 0x346);
+
+	local_irq_save(flags);
+
+	/* Save reset vector */
+	save_vector = *vector;
+
+	/* Setup fake reset vector that does
+	 *   b __secondary_start_pmac_0 + nr*8
+	 */
+	target = (unsigned long) __secondary_start_pmac_0 + nr * 8;
+	patch_branch(vector, target, BRANCH_SET_LINK);
+
+	/* Put some life in our friend */
+	pmac_call_feature(PMAC_FTR_RESET_CPU, NULL, nr, 0);
+
+	/* FIXME: We wait a bit for the CPU to take the exception, I should
+	 * instead wait for the entry code to set something for me. Well,
+	 * ideally, all that crap will be done in prom.c and the CPU left
+	 * in a RAM-based wait loop like CHRP.
+	 */
+	mdelay(1);
+
+	/* Restore our exception vector */
+	*vector = save_vector;
+	flush_icache_range((unsigned long) vector, (unsigned long) vector + 4);
+
+	local_irq_restore(flags);
+	if (ppc_md.progress) ppc_md.progress("smp_core99_kick_cpu done", 0x347);
+
+	return 0;
+}
+
+static void smp_core99_setup_cpu(int cpu_nr)
+{
+	/* Setup L2/L3 */
+	if (cpu_nr != 0)
+		core99_init_caches(cpu_nr);
+
+	/* Setup openpic */
+	mpic_setup_this_cpu();
+}
+
+#ifdef CONFIG_PPC64
+#ifdef CONFIG_HOTPLUG_CPU
+static unsigned int smp_core99_host_open;
+
+static int smp_core99_cpu_prepare(unsigned int cpu)
+{
+	int rc;
+
+	/* Open i2c bus if it was used for tb sync */
+	if (pmac_tb_clock_chip_host && !smp_core99_host_open) {
+		rc = pmac_i2c_open(pmac_tb_clock_chip_host, 1);
+		if (rc) {
+			pr_err("Failed to open i2c bus for time sync\n");
+			return notifier_from_errno(rc);
+		}
+		smp_core99_host_open = 1;
+	}
+	return 0;
+}
+
+static int smp_core99_cpu_online(unsigned int cpu)
+{
+	/* Close i2c bus if it was used for tb sync */
+	if (pmac_tb_clock_chip_host && smp_core99_host_open) {
+		pmac_i2c_close(pmac_tb_clock_chip_host);
+		smp_core99_host_open = 0;
+	}
+	return 0;
+}
+#endif /* CONFIG_HOTPLUG_CPU */
+
+static void __init smp_core99_bringup_done(void)
+{
+	extern void g5_phy_disable_cpu1(void);
+
+	/* Close i2c bus if it was used for tb sync */
+	if (pmac_tb_clock_chip_host)
+		pmac_i2c_close(pmac_tb_clock_chip_host);
+
+	/* If we didn't start the second CPU, we must take
+	 * it off the bus.
+	 */
+	if (of_machine_is_compatible("MacRISC4") &&
+	    num_online_cpus() < 2) {
+		set_cpu_present(1, false);
+		g5_phy_disable_cpu1();
+	}
+#ifdef CONFIG_HOTPLUG_CPU
+	cpuhp_setup_state_nocalls(CPUHP_POWERPC_PMAC_PREPARE,
+				  "powerpc/pmac:prepare", smp_core99_cpu_prepare,
+				  NULL);
+	cpuhp_setup_state_nocalls(CPUHP_AP_ONLINE_DYN, "powerpc/pmac:online",
+				  smp_core99_cpu_online, NULL);
+#endif
+
+	if (ppc_md.progress)
+		ppc_md.progress("smp_core99_bringup_done", 0x349);
+}
+#endif /* CONFIG_PPC64 */
+
+#ifdef CONFIG_HOTPLUG_CPU
+
+static int smp_core99_cpu_disable(void)
+{
+	int rc = generic_cpu_disable();
+	if (rc)
+		return rc;
+
+	mpic_cpu_set_priority(0xf);
+
+	return 0;
+}
+
+#ifdef CONFIG_PPC32
+
+static void pmac_cpu_die(void)
+{
+	int cpu = smp_processor_id();
+
+	local_irq_disable();
+	idle_task_exit();
+	pr_debug("CPU%d offline\n", cpu);
+	generic_set_cpu_dead(cpu);
+	smp_wmb();
+	mb();
+	low_cpu_die();
+}
+
+#else /* CONFIG_PPC32 */
+
+static void pmac_cpu_die(void)
+{
+	int cpu = smp_processor_id();
+
+	local_irq_disable();
+	idle_task_exit();
+
+	/*
+	 * turn off as much as possible, we'll be
+	 * kicked out as this will only be invoked
+	 * on core99 platforms for now ...
+	 */
+
+	printk(KERN_INFO "CPU#%d offline\n", cpu);
+	generic_set_cpu_dead(cpu);
+	smp_wmb();
+
+	/*
+	 * Re-enable interrupts. The NAP code needs to enable them
+	 * anyways, do it now so we deal with the case where one already
+	 * happened while soft-disabled.
+	 * We shouldn't get any external interrupts, only decrementer, and the
+	 * decrementer handler is safe for use on offline CPUs
+	 */
+	local_irq_enable();
+
+	while (1) {
+		/* let's not take timer interrupts too often ... */
+		set_dec(0x7fffffff);
+
+		/* Enter NAP mode */
+		power4_idle();
+	}
+}
+
+#endif /* else CONFIG_PPC32 */
+#endif /* CONFIG_HOTPLUG_CPU */
+
+/* Core99 Macs (dual G4s and G5s) */
+static struct smp_ops_t core99_smp_ops = {
+	.message_pass	= smp_mpic_message_pass,
+	.probe		= smp_core99_probe,
+#ifdef CONFIG_PPC64
+	.bringup_done	= smp_core99_bringup_done,
+#endif
+	.kick_cpu	= smp_core99_kick_cpu,
+	.setup_cpu	= smp_core99_setup_cpu,
+	.give_timebase	= smp_core99_give_timebase,
+	.take_timebase	= smp_core99_take_timebase,
+#if defined(CONFIG_HOTPLUG_CPU)
+	.cpu_disable	= smp_core99_cpu_disable,
+	.cpu_die	= generic_cpu_die,
+#endif
+};
+
+void __init pmac_setup_smp(void)
+{
+	struct device_node *np;
+
+	/* Check for Core99 */
+	np = of_find_node_by_name(NULL, "uni-n");
+	if (!np)
+		np = of_find_node_by_name(NULL, "u3");
+	if (!np)
+		np = of_find_node_by_name(NULL, "u4");
+	if (np) {
+		of_node_put(np);
+		smp_ops = &core99_smp_ops;
+	}
+#ifdef CONFIG_PPC_PMAC32_PSURGE
+	else {
+		/* We have to set bits in cpu_possible_mask here since the
+		 * secondary CPU(s) aren't in the device tree. Various
+		 * things won't be initialized for CPUs not in the possible
+		 * map, so we really need to fix it up here.
+		 */
+		int cpu;
+
+		for (cpu = 1; cpu < 4 && cpu < NR_CPUS; ++cpu)
+			set_cpu_possible(cpu, true);
+		smp_ops = &psurge_smp_ops;
+	}
+#endif /* CONFIG_PPC_PMAC32_PSURGE */
+
+#ifdef CONFIG_HOTPLUG_CPU
+	ppc_md.cpu_die = pmac_cpu_die;
+#endif
+}
+
+