Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 134 insertions, 0 deletions

diff --git a/arch/unicore32/mm/proc-ucv2.S b/arch/unicore32/mm/proc-ucv2.S
new file mode 100644
index 000000000..9d296092e
--- /dev/null
+++ b/arch/unicore32/mm/proc-ucv2.S
@@ -0,0 +1,134 @@
+/*
+ * linux/arch/unicore32/mm/proc-ucv2.S
+ *
+ * Code specific to PKUnity SoC and UniCore ISA
+ *
+ * Copyright (C) 2001-2010 GUAN Xue-tao
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/hwcap.h>
+#include <asm/pgtable-hwdef.h>
+#include <asm/pgtable.h>
+
+#include "proc-macros.S"
+
+ENTRY(cpu_proc_fin)
+	stm.w	(lr), [sp-]
+	mov	ip, #PSR_R_BIT | PSR_I_BIT | PRIV_MODE
+	mov.a	asr, ip
+	b.l	__cpuc_flush_kern_all
+	ldm.w	(pc), [sp]+
+
+/*
+ *	cpu_reset(loc)
+ *
+ *	Perform a soft reset of the system.  Put the CPU into the
+ *	same state as it would be if it had been reset, and branch
+ *	to what would be the reset vector.
+ *
+ *	- loc   - location to jump to for soft reset
+ */
+	.align	5
+ENTRY(cpu_reset)
+	mov	ip, #0
+	movc	p0.c5, ip, #28			@ Cache invalidate all
+	nop8
+
+	movc	p0.c6, ip, #6			@ TLB invalidate all
+	nop8
+
+	movc	ip, p0.c1, #0			@ ctrl register
+	or	ip, ip, #0x2000			@ vector base address
+	andn	ip, ip, #0x000f			@ ............idam
+	movc	p0.c1, ip, #0			@ disable caches and mmu
+	nop
+	mov	pc, r0				@ jump to loc
+	nop8
+
+/*
+ *	cpu_do_idle()
+ *
+ *	Idle the processor (eg, wait for interrupt).
+ *
+ *	IRQs are already disabled.
+ */
+ENTRY(cpu_do_idle)
+	mov	r0, #0				@ PCI address
+	.rept	8
+	ldw	r1, [r0]
+	.endr
+	mov	pc, lr
+
+ENTRY(cpu_dcache_clean_area)
+#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE
+	csub.a	r1, #MAX_AREA_SIZE
+	bsg	101f
+	mov	r9, #PAGE_SZ
+	sub	r9, r9, #1			@ PAGE_MASK
+1:	va2pa	r0, r10, r11, r12, r13		@ r10 is PA
+	b	3f
+2:	cand.a	r0, r9
+	beq	1b
+3:	movc	p0.c5, r10, #11			@ clean D entry
+	nop8
+	add	r0, r0, #CACHE_LINESIZE
+	add	r10, r10, #CACHE_LINESIZE
+	sub.a	r1, r1, #CACHE_LINESIZE
+	bua	2b
+	mov	pc, lr
+#endif
+101:	mov	ip, #0
+	movc	p0.c5, ip, #10			@ Dcache clean all
+	nop8
+
+	mov	pc, lr
+
+/*
+ *	cpu_do_switch_mm(pgd_phys)
+ *
+ *	Set the translation table base pointer to be pgd_phys
+ *
+ *	- pgd_phys - physical address of new pgd
+ *
+ *	It is assumed that:
+ *	- we are not using split page tables
+ */
+	.align	5
+ENTRY(cpu_do_switch_mm)
+	movc	p0.c2, r0, #0			@ update page table ptr
+	nop8
+
+	movc	p0.c6, ip, #6			@ TLB invalidate all
+	nop8
+
+	mov	pc, lr
+
+/*
+ *	cpu_set_pte(ptep, pte)
+ *
+ *	Set a level 2 translation table entry.
+ *
+ *	- ptep  - pointer to level 2 translation table entry
+ *	- pte   - PTE value to store
+ */
+	.align	5
+ENTRY(cpu_set_pte)
+	stw	r1, [r0]
+#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE
+	sub	r2, r0, #PAGE_OFFSET
+	movc	p0.c5, r2, #11				@ Dcache clean line
+	nop8
+#else
+	mov	ip, #0
+	movc	p0.c5, ip, #10				@ Dcache clean all
+	nop8
+	@dcacheline_flush	r0, r2, ip
+#endif
+	mov	pc, lr
+