Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 172 insertions, 0 deletions

diff --git a/drivers/block/paride/paride.h b/drivers/block/paride/paride.h
new file mode 100644
index 000000000..ddb9e589d
--- /dev/null
+++ b/drivers/block/paride/paride.h
@@ -0,0 +1,172 @@
+#ifndef __DRIVERS_PARIDE_H__
+#define __DRIVERS_PARIDE_H__
+
+/* 
+	paride.h	(c) 1997-8  Grant R. Guenther <grant@torque.net>
+   		                    Under the terms of the GPL.
+
+   This file defines the interface between the high-level parallel
+   IDE device drivers (pd, pf, pcd, pt) and the adapter chips.
+
+*/
+
+/* Changes:
+
+	1.01	GRG 1998.05.05	init_proto, release_proto
+*/
+
+#define PARIDE_H_VERSION 	"1.01"
+
+/* Some adapters need to know what kind of device they are in
+
+   Values for devtype:
+*/
+
+#define	PI_PD	0	/* IDE disk */
+#define PI_PCD	1	/* ATAPI CDrom */
+#define PI_PF   2	/* ATAPI disk */
+#define PI_PT	3	/* ATAPI tape */
+#define PI_PG   4       /* ATAPI generic */
+
+/* The paride module contains no state, instead the drivers allocate
+   a pi_adapter data structure and pass it to paride in every operation.
+
+*/
+
+struct pi_adapter  {
+
+	struct pi_protocol *proto;   /* adapter protocol */
+	int	port;		     /* base address of parallel port */
+	int	mode;		     /* transfer mode in use */
+	int     delay;		     /* adapter delay setting */
+	int	devtype;	     /* device type: PI_PD etc. */
+	char    *device;	     /* name of driver */
+	int     unit;		     /* unit number for chained adapters */
+	int	saved_r0;	     /* saved port state */
+	int	saved_r2;	     /* saved port state */
+	int	reserved;	     /* number of ports reserved */
+	unsigned long	private;     /* for protocol module */
+
+	wait_queue_head_t parq;     /* semaphore for parport sharing */
+	void	*pardev;	     /* pointer to pardevice */
+	char	*parname;	     /* parport name */
+	int	claimed;	     /* parport has already been claimed */
+	void (*claim_cont)(void);    /* continuation for parport wait */
+};
+
+typedef struct pi_adapter PIA;
+
+/* functions exported by paride to the high level drivers */
+
+extern int pi_init(PIA *pi, 
+	int autoprobe,		/* 1 to autoprobe */
+	int port, 		/* base port address */
+	int mode, 		/* -1 for autoprobe */
+	int unit,		/* unit number, if supported */
+	int protocol, 		/* protocol to use */
+	int delay, 		/* -1 to use adapter specific default */
+	char * scratch, 	/* address of 512 byte buffer */
+	int devtype,		/* device type: PI_PD, PI_PCD, etc ... */
+	int verbose,		/* log verbose data while probing */
+	char *device		/* name of the driver */
+	);			/* returns 0 on failure, 1 on success */
+
+extern void pi_release(PIA *pi);
+
+/* registers are addressed as (cont,regr)
+
+       	cont: 0 for command register file, 1 for control register(s)
+	regr: 0-7 for register number.
+
+*/
+
+extern void pi_write_regr(PIA *pi, int cont, int regr, int val);
+
+extern int pi_read_regr(PIA *pi, int cont, int regr);
+
+extern void pi_write_block(PIA *pi, char * buf, int count);
+
+extern void pi_read_block(PIA *pi, char * buf, int count);
+
+extern void pi_connect(PIA *pi);
+
+extern void pi_disconnect(PIA *pi);
+
+extern void pi_do_claimed(PIA *pi, void (*cont)(void));
+extern int pi_schedule_claimed(PIA *pi, void (*cont)(void));
+
+/* macros and functions exported to the protocol modules */
+
+#define delay_p			(pi->delay?udelay(pi->delay):(void)0)
+#define out_p(offs,byte)	outb(byte,pi->port+offs); delay_p;
+#define in_p(offs)		(delay_p,inb(pi->port+offs))
+
+#define w0(byte)                {out_p(0,byte);}
+#define r0()                    (in_p(0) & 0xff)
+#define w1(byte)                {out_p(1,byte);}
+#define r1()                    (in_p(1) & 0xff)
+#define w2(byte)                {out_p(2,byte);}
+#define r2()                    (in_p(2) & 0xff)
+#define w3(byte)                {out_p(3,byte);}
+#define w4(byte)                {out_p(4,byte);}
+#define r4()                    (in_p(4) & 0xff)
+#define w4w(data)     		{outw(data,pi->port+4); delay_p;}
+#define w4l(data)     		{outl(data,pi->port+4); delay_p;}
+#define r4w()         		(delay_p,inw(pi->port+4)&0xffff)
+#define r4l()         		(delay_p,inl(pi->port+4)&0xffffffff)
+
+static inline u16 pi_swab16( char *b, int k)
+
+{ 	union { u16 u; char t[2]; } r;
+
+	r.t[0]=b[2*k+1]; r.t[1]=b[2*k];
+        return r.u;
+}
+
+static inline u32 pi_swab32( char *b, int k)
+
+{ 	union { u32 u; char f[4]; } r;
+
+	r.f[0]=b[4*k+1]; r.f[1]=b[4*k];
+	r.f[2]=b[4*k+3]; r.f[3]=b[4*k+2];
+        return r.u;
+}
+
+struct pi_protocol {
+
+	char	name[8];	/* name for this protocol */
+	int	index;		/* index into protocol table */
+
+	int	max_mode;	/* max mode number */
+	int	epp_first;	/* modes >= this use 8 ports */
+	
+	int	default_delay;  /* delay parameter if not specified */
+	int	max_units;	/* max chained units probed for */
+
+	void (*write_regr)(PIA *,int,int,int);
+	int  (*read_regr)(PIA *,int,int);
+	void (*write_block)(PIA *,char *,int);
+	void (*read_block)(PIA *,char *,int);
+
+	void (*connect)(PIA *);
+	void (*disconnect)(PIA *);
+	
+	int  (*test_port)(PIA *);
+	int  (*probe_unit)(PIA *);
+	int  (*test_proto)(PIA *,char *,int);
+	void (*log_adapter)(PIA *,char *,int);
+	
+	int (*init_proto)(PIA *);
+	void (*release_proto)(PIA *);
+	struct module *owner;
+};
+
+typedef struct pi_protocol PIP;
+
+extern int paride_register( PIP * );
+extern void paride_unregister ( PIP * );
+void *pi_register_driver(char *);
+void pi_unregister_driver(void *);
+
+#endif /* __DRIVERS_PARIDE_H__ */
+/* end of paride.h */