Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1388 insertions, 0 deletions

diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c
new file mode 100644
index 000000000..1a298f13b
--- /dev/null
+++ b/drivers/bluetooth/hci_bcm.c
@@ -0,0 +1,1388 @@
+/*
+ *
+ *  Bluetooth HCI UART driver for Broadcom devices
+ *
+ *  Copyright (C) 2015  Intel Corporation
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/skbuff.h>
+#include <linux/firmware.h>
+#include <linux/module.h>
+#include <linux/acpi.h>
+#include <linux/of.h>
+#include <linux/property.h>
+#include <linux/platform_data/x86/apple.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/gpio/consumer.h>
+#include <linux/tty.h>
+#include <linux/interrupt.h>
+#include <linux/dmi.h>
+#include <linux/pm_runtime.h>
+#include <linux/serdev.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "btbcm.h"
+#include "hci_uart.h"
+
+#define BCM_NULL_PKT 0x00
+#define BCM_NULL_SIZE 0
+
+#define BCM_LM_DIAG_PKT 0x07
+#define BCM_LM_DIAG_SIZE 63
+
+#define BCM_TYPE49_PKT 0x31
+#define BCM_TYPE49_SIZE 0
+
+#define BCM_TYPE52_PKT 0x34
+#define BCM_TYPE52_SIZE 0
+
+#define BCM_AUTOSUSPEND_DELAY	5000 /* default autosleep delay */
+
+/**
+ * struct bcm_device - device driver resources
+ * @serdev_hu: HCI UART controller struct
+ * @list: bcm_device_list node
+ * @dev: physical UART slave
+ * @name: device name logged by bt_dev_*() functions
+ * @device_wakeup: BT_WAKE pin,
+ *	assert = Bluetooth device must wake up or remain awake,
+ *	deassert = Bluetooth device may sleep when sleep criteria are met
+ * @shutdown: BT_REG_ON pin,
+ *	power up or power down Bluetooth device internal regulators
+ * @set_device_wakeup: callback to toggle BT_WAKE pin
+ *	either by accessing @device_wakeup or by calling @btlp
+ * @set_shutdown: callback to toggle BT_REG_ON pin
+ *	either by accessing @shutdown or by calling @btpu/@btpd
+ * @btlp: Apple ACPI method to toggle BT_WAKE pin ("Bluetooth Low Power")
+ * @btpu: Apple ACPI method to drive BT_REG_ON pin high ("Bluetooth Power Up")
+ * @btpd: Apple ACPI method to drive BT_REG_ON pin low ("Bluetooth Power Down")
+ * @clk: clock used by Bluetooth device
+ * @clk_enabled: whether @clk is prepared and enabled
+ * @init_speed: default baudrate of Bluetooth device;
+ *	the host UART is initially set to this baudrate so that
+ *	it can configure the Bluetooth device for @oper_speed
+ * @oper_speed: preferred baudrate of Bluetooth device;
+ *	set to 0 if @init_speed is already the preferred baudrate
+ * @irq: interrupt triggered by HOST_WAKE_BT pin
+ * @irq_active_low: whether @irq is active low
+ * @hu: pointer to HCI UART controller struct,
+ *	used to disable flow control during runtime suspend and system sleep
+ * @is_suspended: whether flow control is currently disabled
+ */
+struct bcm_device {
+	/* Must be the first member, hci_serdev.c expects this. */
+	struct hci_uart		serdev_hu;
+	struct list_head	list;
+
+	struct device		*dev;
+
+	const char		*name;
+	struct gpio_desc	*device_wakeup;
+	struct gpio_desc	*shutdown;
+	int			(*set_device_wakeup)(struct bcm_device *, bool);
+	int			(*set_shutdown)(struct bcm_device *, bool);
+#ifdef CONFIG_ACPI
+	acpi_handle		btlp, btpu, btpd;
+	int			gpio_count;
+	int			gpio_int_idx;
+#endif
+
+	struct clk		*clk;
+	bool			clk_enabled;
+
+	u32			init_speed;
+	u32			oper_speed;
+	int			irq;
+	bool			irq_active_low;
+	bool			irq_acquired;
+
+#ifdef CONFIG_PM
+	struct hci_uart		*hu;
+	bool			is_suspended;
+#endif
+};
+
+/* generic bcm uart resources */
+struct bcm_data {
+	struct sk_buff		*rx_skb;
+	struct sk_buff_head	txq;
+
+	struct bcm_device	*dev;
+};
+
+/* List of BCM BT UART devices */
+static DEFINE_MUTEX(bcm_device_lock);
+static LIST_HEAD(bcm_device_list);
+
+static int irq_polarity = -1;
+module_param(irq_polarity, int, 0444);
+MODULE_PARM_DESC(irq_polarity, "IRQ polarity 0: active-high 1: active-low");
+
+static inline void host_set_baudrate(struct hci_uart *hu, unsigned int speed)
+{
+	if (hu->serdev)
+		serdev_device_set_baudrate(hu->serdev, speed);
+	else
+		hci_uart_set_baudrate(hu, speed);
+}
+
+static int bcm_set_baudrate(struct hci_uart *hu, unsigned int speed)
+{
+	struct hci_dev *hdev = hu->hdev;
+	struct sk_buff *skb;
+	struct bcm_update_uart_baud_rate param;
+
+	if (speed > 3000000) {
+		struct bcm_write_uart_clock_setting clock;
+
+		clock.type = BCM_UART_CLOCK_48MHZ;
+
+		bt_dev_dbg(hdev, "Set Controller clock (%d)", clock.type);
+
+		/* This Broadcom specific command changes the UART's controller
+		 * clock for baud rate > 3000000.
+		 */
+		skb = __hci_cmd_sync(hdev, 0xfc45, 1, &clock, HCI_INIT_TIMEOUT);
+		if (IS_ERR(skb)) {
+			int err = PTR_ERR(skb);
+			bt_dev_err(hdev, "BCM: failed to write clock (%d)",
+				   err);
+			return err;
+		}
+
+		kfree_skb(skb);
+	}
+
+	bt_dev_dbg(hdev, "Set Controller UART speed to %d bit/s", speed);
+
+	param.zero = cpu_to_le16(0);
+	param.baud_rate = cpu_to_le32(speed);
+
+	/* This Broadcom specific command changes the UART's controller baud
+	 * rate.
+	 */
+	skb = __hci_cmd_sync(hdev, 0xfc18, sizeof(param), &param,
+			     HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		int err = PTR_ERR(skb);
+		bt_dev_err(hdev, "BCM: failed to write update baudrate (%d)",
+			   err);
+		return err;
+	}
+
+	kfree_skb(skb);
+
+	return 0;
+}
+
+/* bcm_device_exists should be protected by bcm_device_lock */
+static bool bcm_device_exists(struct bcm_device *device)
+{
+	struct list_head *p;
+
+#ifdef CONFIG_PM
+	/* Devices using serdev always exist */
+	if (device && device->hu && device->hu->serdev)
+		return true;
+#endif
+
+	list_for_each(p, &bcm_device_list) {
+		struct bcm_device *dev = list_entry(p, struct bcm_device, list);
+
+		if (device == dev)
+			return true;
+	}
+
+	return false;
+}
+
+static int bcm_gpio_set_power(struct bcm_device *dev, bool powered)
+{
+	int err;
+
+	if (powered && !IS_ERR(dev->clk) && !dev->clk_enabled) {
+		err = clk_prepare_enable(dev->clk);
+		if (err)
+			return err;
+	}
+
+	err = dev->set_shutdown(dev, powered);
+	if (err)
+		goto err_clk_disable;
+
+	err = dev->set_device_wakeup(dev, powered);
+	if (err)
+		goto err_revert_shutdown;
+
+	if (!powered && !IS_ERR(dev->clk) && dev->clk_enabled)
+		clk_disable_unprepare(dev->clk);
+
+	dev->clk_enabled = powered;
+
+	return 0;
+
+err_revert_shutdown:
+	dev->set_shutdown(dev, !powered);
+err_clk_disable:
+	if (powered && !IS_ERR(dev->clk) && !dev->clk_enabled)
+		clk_disable_unprepare(dev->clk);
+	return err;
+}
+
+#ifdef CONFIG_PM
+static irqreturn_t bcm_host_wake(int irq, void *data)
+{
+	struct bcm_device *bdev = data;
+
+	bt_dev_dbg(bdev, "Host wake IRQ");
+
+	pm_runtime_get(bdev->dev);
+	pm_runtime_mark_last_busy(bdev->dev);
+	pm_runtime_put_autosuspend(bdev->dev);
+
+	return IRQ_HANDLED;
+}
+
+static int bcm_request_irq(struct bcm_data *bcm)
+{
+	struct bcm_device *bdev = bcm->dev;
+	int err;
+
+	mutex_lock(&bcm_device_lock);
+	if (!bcm_device_exists(bdev)) {
+		err = -ENODEV;
+		goto unlock;
+	}
+
+	if (bdev->irq <= 0) {
+		err = -EOPNOTSUPP;
+		goto unlock;
+	}
+
+	err = devm_request_irq(bdev->dev, bdev->irq, bcm_host_wake,
+			       bdev->irq_active_low ? IRQF_TRIGGER_FALLING :
+						      IRQF_TRIGGER_RISING,
+			       "host_wake", bdev);
+	if (err) {
+		bdev->irq = err;
+		goto unlock;
+	}
+
+	bdev->irq_acquired = true;
+
+	device_init_wakeup(bdev->dev, true);
+
+	pm_runtime_set_autosuspend_delay(bdev->dev,
+					 BCM_AUTOSUSPEND_DELAY);
+	pm_runtime_use_autosuspend(bdev->dev);
+	pm_runtime_set_active(bdev->dev);
+	pm_runtime_enable(bdev->dev);
+
+unlock:
+	mutex_unlock(&bcm_device_lock);
+
+	return err;
+}
+
+static const struct bcm_set_sleep_mode default_sleep_params = {
+	.sleep_mode = 1,	/* 0=Disabled, 1=UART, 2=Reserved, 3=USB */
+	.idle_host = 2,		/* idle threshold HOST, in 300ms */
+	.idle_dev = 2,		/* idle threshold device, in 300ms */
+	.bt_wake_active = 1,	/* BT_WAKE active mode: 1 = high, 0 = low */
+	.host_wake_active = 0,	/* HOST_WAKE active mode: 1 = high, 0 = low */
+	.allow_host_sleep = 1,	/* Allow host sleep in SCO flag */
+	.combine_modes = 1,	/* Combine sleep and LPM flag */
+	.tristate_control = 0,	/* Allow tri-state control of UART tx flag */
+	/* Irrelevant USB flags */
+	.usb_auto_sleep = 0,
+	.usb_resume_timeout = 0,
+	.break_to_host = 0,
+	.pulsed_host_wake = 1,
+};
+
+static int bcm_setup_sleep(struct hci_uart *hu)
+{
+	struct bcm_data *bcm = hu->priv;
+	struct sk_buff *skb;
+	struct bcm_set_sleep_mode sleep_params = default_sleep_params;
+
+	sleep_params.host_wake_active = !bcm->dev->irq_active_low;
+
+	skb = __hci_cmd_sync(hu->hdev, 0xfc27, sizeof(sleep_params),
+			     &sleep_params, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		int err = PTR_ERR(skb);
+		bt_dev_err(hu->hdev, "Sleep VSC failed (%d)", err);
+		return err;
+	}
+	kfree_skb(skb);
+
+	bt_dev_dbg(hu->hdev, "Set Sleep Parameters VSC succeeded");
+
+	return 0;
+}
+#else
+static inline int bcm_request_irq(struct bcm_data *bcm) { return 0; }
+static inline int bcm_setup_sleep(struct hci_uart *hu) { return 0; }
+#endif
+
+static int bcm_set_diag(struct hci_dev *hdev, bool enable)
+{
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+	struct bcm_data *bcm = hu->priv;
+	struct sk_buff *skb;
+
+	if (!test_bit(HCI_RUNNING, &hdev->flags))
+		return -ENETDOWN;
+
+	skb = bt_skb_alloc(3, GFP_KERNEL);
+	if (!skb)
+		return -ENOMEM;
+
+	skb_put_u8(skb, BCM_LM_DIAG_PKT);
+	skb_put_u8(skb, 0xf0);
+	skb_put_u8(skb, enable);
+
+	skb_queue_tail(&bcm->txq, skb);
+	hci_uart_tx_wakeup(hu);
+
+	return 0;
+}
+
+static int bcm_open(struct hci_uart *hu)
+{
+	struct bcm_data *bcm;
+	struct list_head *p;
+	int err;
+
+	bt_dev_dbg(hu->hdev, "hu %p", hu);
+
+	if (!hci_uart_has_flow_control(hu))
+		return -EOPNOTSUPP;
+
+	bcm = kzalloc(sizeof(*bcm), GFP_KERNEL);
+	if (!bcm)
+		return -ENOMEM;
+
+	skb_queue_head_init(&bcm->txq);
+
+	hu->priv = bcm;
+
+	mutex_lock(&bcm_device_lock);
+
+	if (hu->serdev) {
+		bcm->dev = serdev_device_get_drvdata(hu->serdev);
+		goto out;
+	}
+
+	if (!hu->tty->dev)
+		goto out;
+
+	list_for_each(p, &bcm_device_list) {
+		struct bcm_device *dev = list_entry(p, struct bcm_device, list);
+
+		/* Retrieve saved bcm_device based on parent of the
+		 * platform device (saved during device probe) and
+		 * parent of tty device used by hci_uart
+		 */
+		if (hu->tty->dev->parent == dev->dev->parent) {
+			bcm->dev = dev;
+#ifdef CONFIG_PM
+			dev->hu = hu;
+#endif
+			break;
+		}
+	}
+
+out:
+	if (bcm->dev) {
+		hu->init_speed = bcm->dev->init_speed;
+		hu->oper_speed = bcm->dev->oper_speed;
+		err = bcm_gpio_set_power(bcm->dev, true);
+		if (err)
+			goto err_unset_hu;
+	}
+
+	mutex_unlock(&bcm_device_lock);
+	return 0;
+
+err_unset_hu:
+#ifdef CONFIG_PM
+	if (!hu->serdev)
+		bcm->dev->hu = NULL;
+#endif
+	mutex_unlock(&bcm_device_lock);
+	hu->priv = NULL;
+	kfree(bcm);
+	return err;
+}
+
+static int bcm_close(struct hci_uart *hu)
+{
+	struct bcm_data *bcm = hu->priv;
+	struct bcm_device *bdev = NULL;
+	int err;
+
+	bt_dev_dbg(hu->hdev, "hu %p", hu);
+
+	/* Protect bcm->dev against removal of the device or driver */
+	mutex_lock(&bcm_device_lock);
+
+	if (hu->serdev) {
+		bdev = serdev_device_get_drvdata(hu->serdev);
+	} else if (bcm_device_exists(bcm->dev)) {
+		bdev = bcm->dev;
+#ifdef CONFIG_PM
+		bdev->hu = NULL;
+#endif
+	}
+
+	if (bdev) {
+		if (IS_ENABLED(CONFIG_PM) && bdev->irq_acquired) {
+			devm_free_irq(bdev->dev, bdev->irq, bdev);
+			device_init_wakeup(bdev->dev, false);
+			pm_runtime_disable(bdev->dev);
+		}
+
+		err = bcm_gpio_set_power(bdev, false);
+		if (err)
+			bt_dev_err(hu->hdev, "Failed to power down");
+		else
+			pm_runtime_set_suspended(bdev->dev);
+	}
+	mutex_unlock(&bcm_device_lock);
+
+	skb_queue_purge(&bcm->txq);
+	kfree_skb(bcm->rx_skb);
+	kfree(bcm);
+
+	hu->priv = NULL;
+	return 0;
+}
+
+static int bcm_flush(struct hci_uart *hu)
+{
+	struct bcm_data *bcm = hu->priv;
+
+	bt_dev_dbg(hu->hdev, "hu %p", hu);
+
+	skb_queue_purge(&bcm->txq);
+
+	return 0;
+}
+
+static int bcm_setup(struct hci_uart *hu)
+{
+	struct bcm_data *bcm = hu->priv;
+	char fw_name[64];
+	const struct firmware *fw;
+	unsigned int speed;
+	int err;
+
+	bt_dev_dbg(hu->hdev, "hu %p", hu);
+
+	hu->hdev->set_diag = bcm_set_diag;
+	hu->hdev->set_bdaddr = btbcm_set_bdaddr;
+
+	err = btbcm_initialize(hu->hdev, fw_name, sizeof(fw_name), false);
+	if (err)
+		return err;
+
+	err = request_firmware(&fw, fw_name, &hu->hdev->dev);
+	if (err < 0) {
+		bt_dev_info(hu->hdev, "BCM: Patch %s not found", fw_name);
+		return 0;
+	}
+
+	err = btbcm_patchram(hu->hdev, fw);
+	if (err) {
+		bt_dev_info(hu->hdev, "BCM: Patch failed (%d)", err);
+		goto finalize;
+	}
+
+	/* Init speed if any */
+	if (hu->init_speed)
+		speed = hu->init_speed;
+	else if (hu->proto->init_speed)
+		speed = hu->proto->init_speed;
+	else
+		speed = 0;
+
+	if (speed)
+		host_set_baudrate(hu, speed);
+
+	/* Operational speed if any */
+	if (hu->oper_speed)
+		speed = hu->oper_speed;
+	else if (hu->proto->oper_speed)
+		speed = hu->proto->oper_speed;
+	else
+		speed = 0;
+
+	if (speed) {
+		err = bcm_set_baudrate(hu, speed);
+		if (!err)
+			host_set_baudrate(hu, speed);
+	}
+
+finalize:
+	release_firmware(fw);
+
+	err = btbcm_finalize(hu->hdev);
+	if (err)
+		return err;
+
+	if (!bcm_request_irq(bcm))
+		err = bcm_setup_sleep(hu);
+
+	return err;
+}
+
+#define BCM_RECV_LM_DIAG \
+	.type = BCM_LM_DIAG_PKT, \
+	.hlen = BCM_LM_DIAG_SIZE, \
+	.loff = 0, \
+	.lsize = 0, \
+	.maxlen = BCM_LM_DIAG_SIZE
+
+#define BCM_RECV_NULL \
+	.type = BCM_NULL_PKT, \
+	.hlen = BCM_NULL_SIZE, \
+	.loff = 0, \
+	.lsize = 0, \
+	.maxlen = BCM_NULL_SIZE
+
+#define BCM_RECV_TYPE49 \
+	.type = BCM_TYPE49_PKT, \
+	.hlen = BCM_TYPE49_SIZE, \
+	.loff = 0, \
+	.lsize = 0, \
+	.maxlen = BCM_TYPE49_SIZE
+
+#define BCM_RECV_TYPE52 \
+	.type = BCM_TYPE52_PKT, \
+	.hlen = BCM_TYPE52_SIZE, \
+	.loff = 0, \
+	.lsize = 0, \
+	.maxlen = BCM_TYPE52_SIZE
+
+static const struct h4_recv_pkt bcm_recv_pkts[] = {
+	{ H4_RECV_ACL,      .recv = hci_recv_frame },
+	{ H4_RECV_SCO,      .recv = hci_recv_frame },
+	{ H4_RECV_EVENT,    .recv = hci_recv_frame },
+	{ BCM_RECV_LM_DIAG, .recv = hci_recv_diag  },
+	{ BCM_RECV_NULL,    .recv = hci_recv_diag  },
+	{ BCM_RECV_TYPE49,  .recv = hci_recv_diag  },
+	{ BCM_RECV_TYPE52,  .recv = hci_recv_diag  },
+};
+
+static int bcm_recv(struct hci_uart *hu, const void *data, int count)
+{
+	struct bcm_data *bcm = hu->priv;
+
+	if (!test_bit(HCI_UART_REGISTERED, &hu->flags))
+		return -EUNATCH;
+
+	bcm->rx_skb = h4_recv_buf(hu->hdev, bcm->rx_skb, data, count,
+				  bcm_recv_pkts, ARRAY_SIZE(bcm_recv_pkts));
+	if (IS_ERR(bcm->rx_skb)) {
+		int err = PTR_ERR(bcm->rx_skb);
+		bt_dev_err(hu->hdev, "Frame reassembly failed (%d)", err);
+		bcm->rx_skb = NULL;
+		return err;
+	} else if (!bcm->rx_skb) {
+		/* Delay auto-suspend when receiving completed packet */
+		mutex_lock(&bcm_device_lock);
+		if (bcm->dev && bcm_device_exists(bcm->dev)) {
+			pm_runtime_get(bcm->dev->dev);
+			pm_runtime_mark_last_busy(bcm->dev->dev);
+			pm_runtime_put_autosuspend(bcm->dev->dev);
+		}
+		mutex_unlock(&bcm_device_lock);
+	}
+
+	return count;
+}
+
+static int bcm_enqueue(struct hci_uart *hu, struct sk_buff *skb)
+{
+	struct bcm_data *bcm = hu->priv;
+
+	bt_dev_dbg(hu->hdev, "hu %p skb %p", hu, skb);
+
+	/* Prepend skb with frame type */
+	memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1);
+	skb_queue_tail(&bcm->txq, skb);
+
+	return 0;
+}
+
+static struct sk_buff *bcm_dequeue(struct hci_uart *hu)
+{
+	struct bcm_data *bcm = hu->priv;
+	struct sk_buff *skb = NULL;
+	struct bcm_device *bdev = NULL;
+
+	mutex_lock(&bcm_device_lock);
+
+	if (bcm_device_exists(bcm->dev)) {
+		bdev = bcm->dev;
+		pm_runtime_get_sync(bdev->dev);
+		/* Shall be resumed here */
+	}
+
+	skb = skb_dequeue(&bcm->txq);
+
+	if (bdev) {
+		pm_runtime_mark_last_busy(bdev->dev);
+		pm_runtime_put_autosuspend(bdev->dev);
+	}
+
+	mutex_unlock(&bcm_device_lock);
+
+	return skb;
+}
+
+#ifdef CONFIG_PM
+static int bcm_suspend_device(struct device *dev)
+{
+	struct bcm_device *bdev = dev_get_drvdata(dev);
+	int err;
+
+	bt_dev_dbg(bdev, "");
+
+	if (!bdev->is_suspended && bdev->hu) {
+		hci_uart_set_flow_control(bdev->hu, true);
+
+		/* Once this returns, driver suspends BT via GPIO */
+		bdev->is_suspended = true;
+	}
+
+	/* Suspend the device */
+	err = bdev->set_device_wakeup(bdev, false);
+	if (err) {
+		if (bdev->is_suspended && bdev->hu) {
+			bdev->is_suspended = false;
+			hci_uart_set_flow_control(bdev->hu, false);
+		}
+		return -EBUSY;
+	}
+
+	bt_dev_dbg(bdev, "suspend, delaying 15 ms");
+	msleep(15);
+
+	return 0;
+}
+
+static int bcm_resume_device(struct device *dev)
+{
+	struct bcm_device *bdev = dev_get_drvdata(dev);
+	int err;
+
+	bt_dev_dbg(bdev, "");
+
+	err = bdev->set_device_wakeup(bdev, true);
+	if (err) {
+		dev_err(dev, "Failed to power up\n");
+		return err;
+	}
+
+	bt_dev_dbg(bdev, "resume, delaying 15 ms");
+	msleep(15);
+
+	/* When this executes, the device has woken up already */
+	if (bdev->is_suspended && bdev->hu) {
+		bdev->is_suspended = false;
+
+		hci_uart_set_flow_control(bdev->hu, false);
+	}
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_PM_SLEEP
+/* suspend callback */
+static int bcm_suspend(struct device *dev)
+{
+	struct bcm_device *bdev = dev_get_drvdata(dev);
+	int error;
+
+	bt_dev_dbg(bdev, "suspend: is_suspended %d", bdev->is_suspended);
+
+	/*
+	 * When used with a device instantiated as platform_device, bcm_suspend
+	 * can be called at any time as long as the platform device is bound,
+	 * so it should use bcm_device_lock to protect access to hci_uart
+	 * and device_wake-up GPIO.
+	 */
+	mutex_lock(&bcm_device_lock);
+
+	if (!bdev->hu)
+		goto unlock;
+
+	if (pm_runtime_active(dev))
+		bcm_suspend_device(dev);
+
+	if (device_may_wakeup(dev) && bdev->irq > 0) {
+		error = enable_irq_wake(bdev->irq);
+		if (!error)
+			bt_dev_dbg(bdev, "BCM irq: enabled");
+	}
+
+unlock:
+	mutex_unlock(&bcm_device_lock);
+
+	return 0;
+}
+
+/* resume callback */
+static int bcm_resume(struct device *dev)
+{
+	struct bcm_device *bdev = dev_get_drvdata(dev);
+	int err = 0;
+
+	bt_dev_dbg(bdev, "resume: is_suspended %d", bdev->is_suspended);
+
+	/*
+	 * When used with a device instantiated as platform_device, bcm_resume
+	 * can be called at any time as long as platform device is bound,
+	 * so it should use bcm_device_lock to protect access to hci_uart
+	 * and device_wake-up GPIO.
+	 */
+	mutex_lock(&bcm_device_lock);
+
+	if (!bdev->hu)
+		goto unlock;
+
+	if (device_may_wakeup(dev) && bdev->irq > 0) {
+		disable_irq_wake(bdev->irq);
+		bt_dev_dbg(bdev, "BCM irq: disabled");
+	}
+
+	err = bcm_resume_device(dev);
+
+unlock:
+	mutex_unlock(&bcm_device_lock);
+
+	if (!err) {
+		pm_runtime_disable(dev);
+		pm_runtime_set_active(dev);
+		pm_runtime_enable(dev);
+	}
+
+	return 0;
+}
+#endif
+
+static const struct acpi_gpio_params first_gpio = { 0, 0, false };
+static const struct acpi_gpio_params second_gpio = { 1, 0, false };
+static const struct acpi_gpio_params third_gpio = { 2, 0, false };
+
+static const struct acpi_gpio_mapping acpi_bcm_int_last_gpios[] = {
+	{ "device-wakeup-gpios", &first_gpio, 1 },
+	{ "shutdown-gpios", &second_gpio, 1 },
+	{ "host-wakeup-gpios", &third_gpio, 1 },
+	{ },
+};
+
+static const struct acpi_gpio_mapping acpi_bcm_int_first_gpios[] = {
+	{ "host-wakeup-gpios", &first_gpio, 1 },
+	{ "device-wakeup-gpios", &second_gpio, 1 },
+	{ "shutdown-gpios", &third_gpio, 1 },
+	{ },
+};
+
+/* Some firmware reports an IRQ which does not work (wrong pin in fw table?) */
+static const struct dmi_system_id bcm_broken_irq_dmi_table[] = {
+	{
+		.ident = "Meegopad T08",
+		.matches = {
+			DMI_EXACT_MATCH(DMI_BOARD_VENDOR,
+					"To be filled by OEM."),
+			DMI_EXACT_MATCH(DMI_BOARD_NAME, "T3 MRD"),
+			DMI_EXACT_MATCH(DMI_BOARD_VERSION, "V1.1"),
+		},
+	},
+	{ }
+};
+
+#ifdef CONFIG_ACPI
+static int bcm_resource(struct acpi_resource *ares, void *data)
+{
+	struct bcm_device *dev = data;
+	struct acpi_resource_extended_irq *irq;
+	struct acpi_resource_gpio *gpio;
+	struct acpi_resource_uart_serialbus *sb;
+
+	switch (ares->type) {
+	case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
+		irq = &ares->data.extended_irq;
+		if (irq->polarity != ACPI_ACTIVE_LOW)
+			dev_info(dev->dev, "ACPI Interrupt resource is active-high, this is usually wrong, treating the IRQ as active-low\n");
+		dev->irq_active_low = true;
+		break;
+
+	case ACPI_RESOURCE_TYPE_GPIO:
+		gpio = &ares->data.gpio;
+		if (gpio->connection_type == ACPI_RESOURCE_GPIO_TYPE_INT) {
+			dev->gpio_int_idx = dev->gpio_count;
+			dev->irq_active_low = gpio->polarity == ACPI_ACTIVE_LOW;
+		}
+		dev->gpio_count++;
+		break;
+
+	case ACPI_RESOURCE_TYPE_SERIAL_BUS:
+		sb = &ares->data.uart_serial_bus;
+		if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_UART) {
+			dev->init_speed = sb->default_baud_rate;
+			dev->oper_speed = 4000000;
+		}
+		break;
+
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static int bcm_apple_set_device_wakeup(struct bcm_device *dev, bool awake)
+{
+	if (ACPI_FAILURE(acpi_execute_simple_method(dev->btlp, NULL, !awake)))
+		return -EIO;
+
+	return 0;
+}
+
+static int bcm_apple_set_shutdown(struct bcm_device *dev, bool powered)
+{
+	if (ACPI_FAILURE(acpi_evaluate_object(powered ? dev->btpu : dev->btpd,
+					      NULL, NULL, NULL)))
+		return -EIO;
+
+	return 0;
+}
+
+static int bcm_apple_get_resources(struct bcm_device *dev)
+{
+	struct acpi_device *adev = ACPI_COMPANION(dev->dev);
+	const union acpi_object *obj;
+
+	if (!adev ||
+	    ACPI_FAILURE(acpi_get_handle(adev->handle, "BTLP", &dev->btlp)) ||
+	    ACPI_FAILURE(acpi_get_handle(adev->handle, "BTPU", &dev->btpu)) ||
+	    ACPI_FAILURE(acpi_get_handle(adev->handle, "BTPD", &dev->btpd)))
+		return -ENODEV;
+
+	if (!acpi_dev_get_property(adev, "baud", ACPI_TYPE_BUFFER, &obj) &&
+	    obj->buffer.length == 8)
+		dev->init_speed = *(u64 *)obj->buffer.pointer;
+
+	dev->set_device_wakeup = bcm_apple_set_device_wakeup;
+	dev->set_shutdown = bcm_apple_set_shutdown;
+
+	return 0;
+}
+#else
+static inline int bcm_apple_get_resources(struct bcm_device *dev)
+{
+	return -EOPNOTSUPP;
+}
+#endif /* CONFIG_ACPI */
+
+static int bcm_gpio_set_device_wakeup(struct bcm_device *dev, bool awake)
+{
+	gpiod_set_value_cansleep(dev->device_wakeup, awake);
+	return 0;
+}
+
+static int bcm_gpio_set_shutdown(struct bcm_device *dev, bool powered)
+{
+	gpiod_set_value_cansleep(dev->shutdown, powered);
+	return 0;
+}
+
+static int bcm_get_resources(struct bcm_device *dev)
+{
+	const struct dmi_system_id *dmi_id;
+
+	dev->name = dev_name(dev->dev);
+
+	if (x86_apple_machine && !bcm_apple_get_resources(dev))
+		return 0;
+
+	dev->clk = devm_clk_get(dev->dev, NULL);
+
+	/* Handle deferred probing */
+	if (dev->clk == ERR_PTR(-EPROBE_DEFER))
+		return PTR_ERR(dev->clk);
+
+	dev->device_wakeup = devm_gpiod_get_optional(dev->dev, "device-wakeup",
+						     GPIOD_OUT_LOW);
+	if (IS_ERR(dev->device_wakeup))
+		return PTR_ERR(dev->device_wakeup);
+
+	dev->shutdown = devm_gpiod_get_optional(dev->dev, "shutdown",
+						GPIOD_OUT_LOW);
+	if (IS_ERR(dev->shutdown))
+		return PTR_ERR(dev->shutdown);
+
+	dev->set_device_wakeup = bcm_gpio_set_device_wakeup;
+	dev->set_shutdown = bcm_gpio_set_shutdown;
+
+	/* IRQ can be declared in ACPI table as Interrupt or GpioInt */
+	if (dev->irq <= 0) {
+		struct gpio_desc *gpio;
+
+		gpio = devm_gpiod_get_optional(dev->dev, "host-wakeup",
+					       GPIOD_IN);
+		if (IS_ERR(gpio))
+			return PTR_ERR(gpio);
+
+		dev->irq = gpiod_to_irq(gpio);
+	}
+
+	dmi_id = dmi_first_match(bcm_broken_irq_dmi_table);
+	if (dmi_id) {
+		dev_info(dev->dev, "%s: Has a broken IRQ config, disabling IRQ support / runtime-pm\n",
+			 dmi_id->ident);
+		dev->irq = 0;
+	}
+
+	dev_dbg(dev->dev, "BCM irq: %d\n", dev->irq);
+	return 0;
+}
+
+#ifdef CONFIG_ACPI
+static int bcm_acpi_probe(struct bcm_device *dev)
+{
+	LIST_HEAD(resources);
+	const struct acpi_gpio_mapping *gpio_mapping = acpi_bcm_int_last_gpios;
+	struct resource_entry *entry;
+	int ret;
+
+	/* Retrieve UART ACPI info */
+	dev->gpio_int_idx = -1;
+	ret = acpi_dev_get_resources(ACPI_COMPANION(dev->dev),
+				     &resources, bcm_resource, dev);
+	if (ret < 0)
+		return ret;
+
+	resource_list_for_each_entry(entry, &resources) {
+		if (resource_type(entry->res) == IORESOURCE_IRQ) {
+			dev->irq = entry->res->start;
+			break;
+		}
+	}
+	acpi_dev_free_resource_list(&resources);
+
+	/* If the DSDT uses an Interrupt resource for the IRQ, then there are
+	 * only 2 GPIO resources, we use the irq-last mapping for this, since
+	 * we already have an irq the 3th / last mapping will not be used.
+	 */
+	if (dev->irq)
+		gpio_mapping = acpi_bcm_int_last_gpios;
+	else if (dev->gpio_int_idx == 0)
+		gpio_mapping = acpi_bcm_int_first_gpios;
+	else if (dev->gpio_int_idx == 2)
+		gpio_mapping = acpi_bcm_int_last_gpios;
+	else
+		dev_warn(dev->dev, "Unexpected ACPI gpio_int_idx: %d\n",
+			 dev->gpio_int_idx);
+
+	/* Warn if our expectations are not met. */
+	if (dev->gpio_count != (dev->irq ? 2 : 3))
+		dev_warn(dev->dev, "Unexpected number of ACPI GPIOs: %d\n",
+			 dev->gpio_count);
+
+	ret = devm_acpi_dev_add_driver_gpios(dev->dev, gpio_mapping);
+	if (ret)
+		return ret;
+
+	if (irq_polarity != -1) {
+		dev->irq_active_low = irq_polarity;
+		dev_warn(dev->dev, "Overwriting IRQ polarity to active %s by module-param\n",
+			 dev->irq_active_low ? "low" : "high");
+	}
+
+	return 0;
+}
+#else
+static int bcm_acpi_probe(struct bcm_device *dev)
+{
+	return -EINVAL;
+}
+#endif /* CONFIG_ACPI */
+
+static int bcm_of_probe(struct bcm_device *bdev)
+{
+	device_property_read_u32(bdev->dev, "max-speed", &bdev->oper_speed);
+	return 0;
+}
+
+static int bcm_probe(struct platform_device *pdev)
+{
+	struct bcm_device *dev;
+	int ret;
+
+	dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
+
+	dev->dev = &pdev->dev;
+
+	ret = platform_get_irq(pdev, 0);
+	if (ret < 0)
+		return ret;
+
+	dev->irq = ret;
+
+	if (has_acpi_companion(&pdev->dev)) {
+		ret = bcm_acpi_probe(dev);
+		if (ret)
+			return ret;
+	}
+
+	ret = bcm_get_resources(dev);
+	if (ret)
+		return ret;
+
+	platform_set_drvdata(pdev, dev);
+
+	dev_info(&pdev->dev, "%s device registered.\n", dev->name);
+
+	/* Place this instance on the device list */
+	mutex_lock(&bcm_device_lock);
+	list_add_tail(&dev->list, &bcm_device_list);
+	mutex_unlock(&bcm_device_lock);
+
+	ret = bcm_gpio_set_power(dev, false);
+	if (ret)
+		dev_err(&pdev->dev, "Failed to power down\n");
+
+	return 0;
+}
+
+static int bcm_remove(struct platform_device *pdev)
+{
+	struct bcm_device *dev = platform_get_drvdata(pdev);
+
+	mutex_lock(&bcm_device_lock);
+	list_del(&dev->list);
+	mutex_unlock(&bcm_device_lock);
+
+	dev_info(&pdev->dev, "%s device unregistered.\n", dev->name);
+
+	return 0;
+}
+
+static const struct hci_uart_proto bcm_proto = {
+	.id		= HCI_UART_BCM,
+	.name		= "Broadcom",
+	.manufacturer	= 15,
+	.init_speed	= 115200,
+	.open		= bcm_open,
+	.close		= bcm_close,
+	.flush		= bcm_flush,
+	.setup		= bcm_setup,
+	.set_baudrate	= bcm_set_baudrate,
+	.recv		= bcm_recv,
+	.enqueue	= bcm_enqueue,
+	.dequeue	= bcm_dequeue,
+};
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id bcm_acpi_match[] = {
+	{ "BCM2E00" },
+	{ "BCM2E01" },
+	{ "BCM2E02" },
+	{ "BCM2E03" },
+	{ "BCM2E04" },
+	{ "BCM2E05" },
+	{ "BCM2E06" },
+	{ "BCM2E07" },
+	{ "BCM2E08" },
+	{ "BCM2E09" },
+	{ "BCM2E0A" },
+	{ "BCM2E0B" },
+	{ "BCM2E0C" },
+	{ "BCM2E0D" },
+	{ "BCM2E0E" },
+	{ "BCM2E0F" },
+	{ "BCM2E10" },
+	{ "BCM2E11" },
+	{ "BCM2E12" },
+	{ "BCM2E13" },
+	{ "BCM2E14" },
+	{ "BCM2E15" },
+	{ "BCM2E16" },
+	{ "BCM2E17" },
+	{ "BCM2E18" },
+	{ "BCM2E19" },
+	{ "BCM2E1A" },
+	{ "BCM2E1B" },
+	{ "BCM2E1C" },
+	{ "BCM2E1D" },
+	{ "BCM2E1F" },
+	{ "BCM2E20" },
+	{ "BCM2E21" },
+	{ "BCM2E22" },
+	{ "BCM2E23" },
+	{ "BCM2E24" },
+	{ "BCM2E25" },
+	{ "BCM2E26" },
+	{ "BCM2E27" },
+	{ "BCM2E28" },
+	{ "BCM2E29" },
+	{ "BCM2E2A" },
+	{ "BCM2E2B" },
+	{ "BCM2E2C" },
+	{ "BCM2E2D" },
+	{ "BCM2E2E" },
+	{ "BCM2E2F" },
+	{ "BCM2E30" },
+	{ "BCM2E31" },
+	{ "BCM2E32" },
+	{ "BCM2E33" },
+	{ "BCM2E34" },
+	{ "BCM2E35" },
+	{ "BCM2E36" },
+	{ "BCM2E37" },
+	{ "BCM2E38" },
+	{ "BCM2E39" },
+	{ "BCM2E3A" },
+	{ "BCM2E3B" },
+	{ "BCM2E3C" },
+	{ "BCM2E3D" },
+	{ "BCM2E3E" },
+	{ "BCM2E3F" },
+	{ "BCM2E40" },
+	{ "BCM2E41" },
+	{ "BCM2E42" },
+	{ "BCM2E43" },
+	{ "BCM2E44" },
+	{ "BCM2E45" },
+	{ "BCM2E46" },
+	{ "BCM2E47" },
+	{ "BCM2E48" },
+	{ "BCM2E49" },
+	{ "BCM2E4A" },
+	{ "BCM2E4B" },
+	{ "BCM2E4C" },
+	{ "BCM2E4D" },
+	{ "BCM2E4E" },
+	{ "BCM2E4F" },
+	{ "BCM2E50" },
+	{ "BCM2E51" },
+	{ "BCM2E52" },
+	{ "BCM2E53" },
+	{ "BCM2E54" },
+	{ "BCM2E55" },
+	{ "BCM2E56" },
+	{ "BCM2E57" },
+	{ "BCM2E58" },
+	{ "BCM2E59" },
+	{ "BCM2E5A" },
+	{ "BCM2E5B" },
+	{ "BCM2E5C" },
+	{ "BCM2E5D" },
+	{ "BCM2E5E" },
+	{ "BCM2E5F" },
+	{ "BCM2E60" },
+	{ "BCM2E61" },
+	{ "BCM2E62" },
+	{ "BCM2E63" },
+	{ "BCM2E64" },
+	{ "BCM2E65" },
+	{ "BCM2E66" },
+	{ "BCM2E67" },
+	{ "BCM2E68" },
+	{ "BCM2E69" },
+	{ "BCM2E6B" },
+	{ "BCM2E6D" },
+	{ "BCM2E6E" },
+	{ "BCM2E6F" },
+	{ "BCM2E70" },
+	{ "BCM2E71" },
+	{ "BCM2E72" },
+	{ "BCM2E73" },
+	{ "BCM2E74" },
+	{ "BCM2E75" },
+	{ "BCM2E76" },
+	{ "BCM2E77" },
+	{ "BCM2E78" },
+	{ "BCM2E79" },
+	{ "BCM2E7A" },
+	{ "BCM2E7B" },
+	{ "BCM2E7C" },
+	{ "BCM2E7D" },
+	{ "BCM2E7E" },
+	{ "BCM2E7F" },
+	{ "BCM2E80" },
+	{ "BCM2E81" },
+	{ "BCM2E82" },
+	{ "BCM2E83" },
+	{ "BCM2E84" },
+	{ "BCM2E85" },
+	{ "BCM2E86" },
+	{ "BCM2E87" },
+	{ "BCM2E88" },
+	{ "BCM2E89" },
+	{ "BCM2E8A" },
+	{ "BCM2E8B" },
+	{ "BCM2E8C" },
+	{ "BCM2E8D" },
+	{ "BCM2E8E" },
+	{ "BCM2E90" },
+	{ "BCM2E92" },
+	{ "BCM2E93" },
+	{ "BCM2E94" },
+	{ "BCM2E95" },
+	{ "BCM2E96" },
+	{ "BCM2E97" },
+	{ "BCM2E98" },
+	{ "BCM2E99" },
+	{ "BCM2E9A" },
+	{ "BCM2E9B" },
+	{ "BCM2E9C" },
+	{ "BCM2E9D" },
+	{ "BCM2EA0" },
+	{ "BCM2EA1" },
+	{ "BCM2EA2" },
+	{ "BCM2EA3" },
+	{ "BCM2EA4" },
+	{ "BCM2EA5" },
+	{ "BCM2EA6" },
+	{ "BCM2EA7" },
+	{ "BCM2EA8" },
+	{ "BCM2EA9" },
+	{ "BCM2EAA" },
+	{ "BCM2EAB" },
+	{ "BCM2EAC" },
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, bcm_acpi_match);
+#endif
+
+/* suspend and resume callbacks */
+static const struct dev_pm_ops bcm_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(bcm_suspend, bcm_resume)
+	SET_RUNTIME_PM_OPS(bcm_suspend_device, bcm_resume_device, NULL)
+};
+
+static struct platform_driver bcm_driver = {
+	.probe = bcm_probe,
+	.remove = bcm_remove,
+	.driver = {
+		.name = "hci_bcm",
+		.acpi_match_table = ACPI_PTR(bcm_acpi_match),
+		.pm = &bcm_pm_ops,
+	},
+};
+
+static int bcm_serdev_probe(struct serdev_device *serdev)
+{
+	struct bcm_device *bcmdev;
+	int err;
+
+	bcmdev = devm_kzalloc(&serdev->dev, sizeof(*bcmdev), GFP_KERNEL);
+	if (!bcmdev)
+		return -ENOMEM;
+
+	bcmdev->dev = &serdev->dev;
+#ifdef CONFIG_PM
+	bcmdev->hu = &bcmdev->serdev_hu;
+#endif
+	bcmdev->serdev_hu.serdev = serdev;
+	serdev_device_set_drvdata(serdev, bcmdev);
+
+	if (has_acpi_companion(&serdev->dev))
+		err = bcm_acpi_probe(bcmdev);
+	else
+		err = bcm_of_probe(bcmdev);
+	if (err)
+		return err;
+
+	err = bcm_get_resources(bcmdev);
+	if (err)
+		return err;
+
+	if (!bcmdev->shutdown) {
+		dev_warn(&serdev->dev,
+			 "No reset resource, using default baud rate\n");
+		bcmdev->oper_speed = bcmdev->init_speed;
+	}
+
+	err = bcm_gpio_set_power(bcmdev, false);
+	if (err)
+		dev_err(&serdev->dev, "Failed to power down\n");
+
+	return hci_uart_register_device(&bcmdev->serdev_hu, &bcm_proto);
+}
+
+static void bcm_serdev_remove(struct serdev_device *serdev)
+{
+	struct bcm_device *bcmdev = serdev_device_get_drvdata(serdev);
+
+	hci_uart_unregister_device(&bcmdev->serdev_hu);
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id bcm_bluetooth_of_match[] = {
+	{ .compatible = "brcm,bcm43438-bt" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, bcm_bluetooth_of_match);
+#endif
+
+static struct serdev_device_driver bcm_serdev_driver = {
+	.probe = bcm_serdev_probe,
+	.remove = bcm_serdev_remove,
+	.driver = {
+		.name = "hci_uart_bcm",
+		.of_match_table = of_match_ptr(bcm_bluetooth_of_match),
+		.acpi_match_table = ACPI_PTR(bcm_acpi_match),
+		.pm = &bcm_pm_ops,
+	},
+};
+
+int __init bcm_init(void)
+{
+	/* For now, we need to keep both platform device
+	 * driver (ACPI generated) and serdev driver (DT).
+	 */
+	platform_driver_register(&bcm_driver);
+	serdev_device_driver_register(&bcm_serdev_driver);
+
+	return hci_uart_register_proto(&bcm_proto);
+}
+
+int __exit bcm_deinit(void)
+{
+	platform_driver_unregister(&bcm_driver);
+	serdev_device_driver_unregister(&bcm_serdev_driver);
+
+	return hci_uart_unregister_proto(&bcm_proto);
+}