Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

41 files changed, 25816 insertions, 0 deletions

diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
new file mode 100644
index 000000000..7a3e5a8f6
--- /dev/null
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -0,0 +1,138 @@
+config DRM_BRIDGE
+	def_bool y
+	depends on DRM
+	help
+	  Bridge registration and lookup framework.
+
+config DRM_PANEL_BRIDGE
+	def_bool y
+	depends on DRM_BRIDGE
+	depends on DRM_KMS_HELPER
+	select DRM_PANEL
+	help
+	  DRM bridge wrapper of DRM panels
+
+menu "Display Interface Bridges"
+	depends on DRM && DRM_BRIDGE
+
+config DRM_ANALOGIX_ANX78XX
+	tristate "Analogix ANX78XX bridge"
+	select DRM_KMS_HELPER
+	select REGMAP_I2C
+	---help---
+	  ANX78XX is an ultra-low Full-HD SlimPort transmitter
+	  designed for portable devices. The ANX78XX transforms
+	  the HDMI output of an application processor to MyDP
+	  or DisplayPort.
+
+config DRM_CDNS_DSI
+	tristate "Cadence DPI/DSI bridge"
+	select DRM_KMS_HELPER
+	select DRM_MIPI_DSI
+	select DRM_PANEL_BRIDGE
+	depends on OF
+	help
+	  Support Cadence DPI to DSI bridge. This is an internal
+	  bridge and is meant to be directly embedded in a SoC.
+
+config DRM_DUMB_VGA_DAC
+	tristate "Dumb VGA DAC Bridge support"
+	depends on OF
+	select DRM_KMS_HELPER
+	help
+	  Support for non-programmable RGB to VGA DAC bridges, such as ADI
+	  ADV7123, TI THS8134 and THS8135 or passive resistor ladder DACs.
+
+config DRM_LVDS_ENCODER
+	tristate "Transparent parallel to LVDS encoder support"
+	depends on OF
+	select DRM_KMS_HELPER
+	select DRM_PANEL_BRIDGE
+	help
+	  Support for transparent parallel to LVDS encoders that don't require
+	  any configuration.
+
+config DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW
+	tristate "MegaChips stdp4028-ge-b850v3-fw and stdp2690-ge-b850v3-fw"
+	depends on OF
+	select DRM_KMS_HELPER
+	select DRM_PANEL
+	---help---
+          This is a driver for the display bridges of
+          GE B850v3 that convert dual channel LVDS
+          to DP++. This is used with the i.MX6 imx-ldb
+          driver. You are likely to say N here.
+
+config DRM_NXP_PTN3460
+	tristate "NXP PTN3460 DP/LVDS bridge"
+	depends on OF
+	select DRM_KMS_HELPER
+	select DRM_PANEL
+	---help---
+	  NXP PTN3460 eDP-LVDS bridge chip driver.
+
+config DRM_PARADE_PS8622
+	tristate "Parade eDP/LVDS bridge"
+	depends on OF
+	select DRM_PANEL
+	select DRM_KMS_HELPER
+	select BACKLIGHT_LCD_SUPPORT
+	select BACKLIGHT_CLASS_DEVICE
+	---help---
+	  Parade eDP-LVDS bridge chip driver.
+
+config DRM_SIL_SII8620
+	tristate "Silicon Image SII8620 HDMI/MHL bridge"
+	depends on OF
+	select DRM_KMS_HELPER
+	imply EXTCON
+	select INPUT
+	select RC_CORE
+	help
+	  Silicon Image SII8620 HDMI/MHL bridge chip driver.
+
+config DRM_SII902X
+	tristate "Silicon Image sii902x RGB/HDMI bridge"
+	depends on OF
+	select DRM_KMS_HELPER
+	select REGMAP_I2C
+	---help---
+	  Silicon Image sii902x bridge chip driver.
+
+config DRM_SII9234
+	tristate "Silicon Image SII9234 HDMI/MHL bridge"
+	depends on OF
+	---help---
+	  Say Y here if you want support for the MHL interface.
+	  It is an I2C driver, that detects connection of MHL bridge
+	  and starts encapsulation of HDMI signal.
+
+config DRM_THINE_THC63LVD1024
+	tristate "Thine THC63LVD1024 LVDS decoder bridge"
+	depends on OF
+	---help---
+	  Thine THC63LVD1024 LVDS/parallel converter driver.
+
+config DRM_TOSHIBA_TC358767
+	tristate "Toshiba TC358767 eDP bridge"
+	depends on OF
+	select DRM_KMS_HELPER
+	select REGMAP_I2C
+	select DRM_PANEL
+	---help---
+	  Toshiba TC358767 eDP bridge chip driver.
+
+config DRM_TI_TFP410
+	tristate "TI TFP410 DVI/HDMI bridge"
+	depends on OF
+	select DRM_KMS_HELPER
+	---help---
+	  Texas Instruments TFP410 DVI/HDMI Transmitter driver
+
+source "drivers/gpu/drm/bridge/analogix/Kconfig"
+
+source "drivers/gpu/drm/bridge/adv7511/Kconfig"
+
+source "drivers/gpu/drm/bridge/synopsys/Kconfig"
+
+endmenu
diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
new file mode 100644
index 000000000..35f88d48e
--- /dev/null
+++ b/drivers/gpu/drm/bridge/Makefile
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_DRM_ANALOGIX_ANX78XX) += analogix-anx78xx.o
+obj-$(CONFIG_DRM_CDNS_DSI) += cdns-dsi.o
+obj-$(CONFIG_DRM_DUMB_VGA_DAC) += dumb-vga-dac.o
+obj-$(CONFIG_DRM_LVDS_ENCODER) += lvds-encoder.o
+obj-$(CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW) += megachips-stdpxxxx-ge-b850v3-fw.o
+obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o
+obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o
+obj-$(CONFIG_DRM_SIL_SII8620) += sil-sii8620.o
+obj-$(CONFIG_DRM_SII902X) += sii902x.o
+obj-$(CONFIG_DRM_SII9234) += sii9234.o
+obj-$(CONFIG_DRM_THINE_THC63LVD1024) += thc63lvd1024.o
+obj-$(CONFIG_DRM_TOSHIBA_TC358767) += tc358767.o
+obj-$(CONFIG_DRM_ANALOGIX_DP) += analogix/
+obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511/
+obj-$(CONFIG_DRM_TI_TFP410) += ti-tfp410.o
+obj-y += synopsys/
diff --git a/drivers/gpu/drm/bridge/adv7511/Kconfig b/drivers/gpu/drm/bridge/adv7511/Kconfig
new file mode 100644
index 000000000..944e440c4
--- /dev/null
+++ b/drivers/gpu/drm/bridge/adv7511/Kconfig
@@ -0,0 +1,31 @@
+config DRM_I2C_ADV7511
+	tristate "ADV7511 encoder"
+	depends on OF
+	select DRM_KMS_HELPER
+	select REGMAP_I2C
+	help
+	  Support for the Analog Device ADV7511(W) and ADV7513 HDMI encoders.
+
+config DRM_I2C_ADV7511_AUDIO
+	bool "ADV7511 HDMI Audio driver"
+	depends on DRM_I2C_ADV7511 && SND_SOC
+	select SND_SOC_HDMI_CODEC
+	help
+	  Support the ADV7511 HDMI Audio interface. This is used in
+	  conjunction with the AV7511  HDMI driver.
+
+config DRM_I2C_ADV7533
+	bool "ADV7533 encoder"
+	depends on DRM_I2C_ADV7511
+	select DRM_MIPI_DSI
+	default y
+	help
+	  Support for the Analog Devices ADV7533 DSI to HDMI encoder.
+
+config DRM_I2C_ADV7511_CEC
+	bool "ADV7511/33 HDMI CEC driver"
+	depends on DRM_I2C_ADV7511
+	select CEC_CORE
+	default y
+	help
+	  When selected the HDMI transmitter will support the CEC feature.
diff --git a/drivers/gpu/drm/bridge/adv7511/Makefile b/drivers/gpu/drm/bridge/adv7511/Makefile
new file mode 100644
index 000000000..5bb384938
--- /dev/null
+++ b/drivers/gpu/drm/bridge/adv7511/Makefile
@@ -0,0 +1,5 @@
+adv7511-y := adv7511_drv.o
+adv7511-$(CONFIG_DRM_I2C_ADV7511_AUDIO) += adv7511_audio.o
+adv7511-$(CONFIG_DRM_I2C_ADV7511_CEC) += adv7511_cec.o
+adv7511-$(CONFIG_DRM_I2C_ADV7533) += adv7533.o
+obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511.o
diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511.h b/drivers/gpu/drm/bridge/adv7511/adv7511.h
new file mode 100644
index 000000000..73d8ccb97
--- /dev/null
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511.h
@@ -0,0 +1,456 @@
+/*
+ * Analog Devices ADV7511 HDMI transmitter driver
+ *
+ * Copyright 2012 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
+#ifndef __DRM_I2C_ADV7511_H__
+#define __DRM_I2C_ADV7511_H__
+
+#include <linux/hdmi.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_mipi_dsi.h>
+
+#define ADV7511_REG_CHIP_REVISION		0x00
+#define ADV7511_REG_N0				0x01
+#define ADV7511_REG_N1				0x02
+#define ADV7511_REG_N2				0x03
+#define ADV7511_REG_SPDIF_FREQ			0x04
+#define ADV7511_REG_CTS_AUTOMATIC1		0x05
+#define ADV7511_REG_CTS_AUTOMATIC2		0x06
+#define ADV7511_REG_CTS_MANUAL0			0x07
+#define ADV7511_REG_CTS_MANUAL1			0x08
+#define ADV7511_REG_CTS_MANUAL2			0x09
+#define ADV7511_REG_AUDIO_SOURCE		0x0a
+#define ADV7511_REG_AUDIO_CONFIG		0x0b
+#define ADV7511_REG_I2S_CONFIG			0x0c
+#define ADV7511_REG_I2S_WIDTH			0x0d
+#define ADV7511_REG_AUDIO_SUB_SRC0		0x0e
+#define ADV7511_REG_AUDIO_SUB_SRC1		0x0f
+#define ADV7511_REG_AUDIO_SUB_SRC2		0x10
+#define ADV7511_REG_AUDIO_SUB_SRC3		0x11
+#define ADV7511_REG_AUDIO_CFG1			0x12
+#define ADV7511_REG_AUDIO_CFG2			0x13
+#define ADV7511_REG_AUDIO_CFG3			0x14
+#define ADV7511_REG_I2C_FREQ_ID_CFG		0x15
+#define ADV7511_REG_VIDEO_INPUT_CFG1		0x16
+#define ADV7511_REG_CSC_UPPER(x)		(0x18 + (x) * 2)
+#define ADV7511_REG_CSC_LOWER(x)		(0x19 + (x) * 2)
+#define ADV7511_REG_SYNC_DECODER(x)		(0x30 + (x))
+#define ADV7511_REG_DE_GENERATOR		(0x35 + (x))
+#define ADV7511_REG_PIXEL_REPETITION		0x3b
+#define ADV7511_REG_VIC_MANUAL			0x3c
+#define ADV7511_REG_VIC_SEND			0x3d
+#define ADV7511_REG_VIC_DETECTED		0x3e
+#define ADV7511_REG_AUX_VIC_DETECTED		0x3f
+#define ADV7511_REG_PACKET_ENABLE0		0x40
+#define ADV7511_REG_POWER			0x41
+#define ADV7511_REG_STATUS			0x42
+#define ADV7511_REG_EDID_I2C_ADDR		0x43
+#define ADV7511_REG_PACKET_ENABLE1		0x44
+#define ADV7511_REG_PACKET_I2C_ADDR		0x45
+#define ADV7511_REG_DSD_ENABLE			0x46
+#define ADV7511_REG_VIDEO_INPUT_CFG2		0x48
+#define ADV7511_REG_INFOFRAME_UPDATE		0x4a
+#define ADV7511_REG_GC(x)			(0x4b + (x)) /* 0x4b - 0x51 */
+#define ADV7511_REG_AVI_INFOFRAME_VERSION	0x52
+#define ADV7511_REG_AVI_INFOFRAME_LENGTH	0x53
+#define ADV7511_REG_AVI_INFOFRAME_CHECKSUM	0x54
+#define ADV7511_REG_AVI_INFOFRAME(x)		(0x55 + (x)) /* 0x55 - 0x6f */
+#define ADV7511_REG_AUDIO_INFOFRAME_VERSION	0x70
+#define ADV7511_REG_AUDIO_INFOFRAME_LENGTH	0x71
+#define ADV7511_REG_AUDIO_INFOFRAME_CHECKSUM	0x72
+#define ADV7511_REG_AUDIO_INFOFRAME(x)		(0x73 + (x)) /* 0x73 - 0x7c */
+#define ADV7511_REG_INT_ENABLE(x)		(0x94 + (x))
+#define ADV7511_REG_INT(x)			(0x96 + (x))
+#define ADV7511_REG_INPUT_CLK_DIV		0x9d
+#define ADV7511_REG_PLL_STATUS			0x9e
+#define ADV7511_REG_HDMI_POWER			0xa1
+#define ADV7511_REG_HDCP_HDMI_CFG		0xaf
+#define ADV7511_REG_AN(x)			(0xb0 + (x)) /* 0xb0 - 0xb7 */
+#define ADV7511_REG_HDCP_STATUS			0xb8
+#define ADV7511_REG_BCAPS			0xbe
+#define ADV7511_REG_BKSV(x)			(0xc0 + (x)) /* 0xc0 - 0xc3 */
+#define ADV7511_REG_EDID_SEGMENT		0xc4
+#define ADV7511_REG_DDC_STATUS			0xc8
+#define ADV7511_REG_EDID_READ_CTRL		0xc9
+#define ADV7511_REG_BSTATUS(x)			(0xca + (x)) /* 0xca - 0xcb */
+#define ADV7511_REG_TIMING_GEN_SEQ		0xd0
+#define ADV7511_REG_POWER2			0xd6
+#define ADV7511_REG_HSYNC_PLACEMENT_MSB		0xfa
+
+#define ADV7511_REG_SYNC_ADJUSTMENT(x)		(0xd7 + (x)) /* 0xd7 - 0xdc */
+#define ADV7511_REG_TMDS_CLOCK_INV		0xde
+#define ADV7511_REG_ARC_CTRL			0xdf
+#define ADV7511_REG_CEC_I2C_ADDR		0xe1
+#define ADV7511_REG_CEC_CTRL			0xe2
+#define ADV7511_REG_CHIP_ID_HIGH		0xf5
+#define ADV7511_REG_CHIP_ID_LOW			0xf6
+
+/* Hardware defined default addresses for I2C register maps */
+#define ADV7511_CEC_I2C_ADDR_DEFAULT		0x3c
+#define ADV7511_EDID_I2C_ADDR_DEFAULT		0x3f
+#define ADV7511_PACKET_I2C_ADDR_DEFAULT		0x38
+
+#define ADV7511_CSC_ENABLE			BIT(7)
+#define ADV7511_CSC_UPDATE_MODE			BIT(5)
+
+#define ADV7511_INT0_HPD			BIT(7)
+#define ADV7511_INT0_VSYNC			BIT(5)
+#define ADV7511_INT0_AUDIO_FIFO_FULL		BIT(4)
+#define ADV7511_INT0_EDID_READY			BIT(2)
+#define ADV7511_INT0_HDCP_AUTHENTICATED		BIT(1)
+
+#define ADV7511_INT1_DDC_ERROR			BIT(7)
+#define ADV7511_INT1_BKSV			BIT(6)
+#define ADV7511_INT1_CEC_TX_READY		BIT(5)
+#define ADV7511_INT1_CEC_TX_ARBIT_LOST		BIT(4)
+#define ADV7511_INT1_CEC_TX_RETRY_TIMEOUT	BIT(3)
+#define ADV7511_INT1_CEC_RX_READY3		BIT(2)
+#define ADV7511_INT1_CEC_RX_READY2		BIT(1)
+#define ADV7511_INT1_CEC_RX_READY1		BIT(0)
+
+#define ADV7511_ARC_CTRL_POWER_DOWN		BIT(0)
+
+#define ADV7511_CEC_CTRL_POWER_DOWN		BIT(0)
+
+#define ADV7511_POWER_POWER_DOWN		BIT(6)
+
+#define ADV7511_HDMI_CFG_MODE_MASK		0x2
+#define ADV7511_HDMI_CFG_MODE_DVI		0x0
+#define ADV7511_HDMI_CFG_MODE_HDMI		0x2
+
+#define ADV7511_AUDIO_SELECT_I2C		0x0
+#define ADV7511_AUDIO_SELECT_SPDIF		0x1
+#define ADV7511_AUDIO_SELECT_DSD		0x2
+#define ADV7511_AUDIO_SELECT_HBR		0x3
+#define ADV7511_AUDIO_SELECT_DST		0x4
+
+#define ADV7511_I2S_SAMPLE_LEN_16		0x2
+#define ADV7511_I2S_SAMPLE_LEN_20		0x3
+#define ADV7511_I2S_SAMPLE_LEN_18		0x4
+#define ADV7511_I2S_SAMPLE_LEN_22		0x5
+#define ADV7511_I2S_SAMPLE_LEN_19		0x8
+#define ADV7511_I2S_SAMPLE_LEN_23		0x9
+#define ADV7511_I2S_SAMPLE_LEN_24		0xb
+#define ADV7511_I2S_SAMPLE_LEN_17		0xc
+#define ADV7511_I2S_SAMPLE_LEN_21		0xd
+
+#define ADV7511_SAMPLE_FREQ_44100		0x0
+#define ADV7511_SAMPLE_FREQ_48000		0x2
+#define ADV7511_SAMPLE_FREQ_32000		0x3
+#define ADV7511_SAMPLE_FREQ_88200		0x8
+#define ADV7511_SAMPLE_FREQ_96000		0xa
+#define ADV7511_SAMPLE_FREQ_176400		0xc
+#define ADV7511_SAMPLE_FREQ_192000		0xe
+
+#define ADV7511_STATUS_POWER_DOWN_POLARITY	BIT(7)
+#define ADV7511_STATUS_HPD			BIT(6)
+#define ADV7511_STATUS_MONITOR_SENSE		BIT(5)
+#define ADV7511_STATUS_I2S_32BIT_MODE		BIT(3)
+
+#define ADV7511_PACKET_ENABLE_N_CTS		BIT(8+6)
+#define ADV7511_PACKET_ENABLE_AUDIO_SAMPLE	BIT(8+5)
+#define ADV7511_PACKET_ENABLE_AVI_INFOFRAME	BIT(8+4)
+#define ADV7511_PACKET_ENABLE_AUDIO_INFOFRAME	BIT(8+3)
+#define ADV7511_PACKET_ENABLE_GC		BIT(7)
+#define ADV7511_PACKET_ENABLE_SPD		BIT(6)
+#define ADV7511_PACKET_ENABLE_MPEG		BIT(5)
+#define ADV7511_PACKET_ENABLE_ACP		BIT(4)
+#define ADV7511_PACKET_ENABLE_ISRC		BIT(3)
+#define ADV7511_PACKET_ENABLE_GM		BIT(2)
+#define ADV7511_PACKET_ENABLE_SPARE2		BIT(1)
+#define ADV7511_PACKET_ENABLE_SPARE1		BIT(0)
+
+#define ADV7511_REG_POWER2_HPD_SRC_MASK		0xc0
+#define ADV7511_REG_POWER2_HPD_SRC_BOTH		0x00
+#define ADV7511_REG_POWER2_HPD_SRC_HPD		0x40
+#define ADV7511_REG_POWER2_HPD_SRC_CEC		0x80
+#define ADV7511_REG_POWER2_HPD_SRC_NONE		0xc0
+#define ADV7511_REG_POWER2_TDMS_ENABLE		BIT(4)
+#define ADV7511_REG_POWER2_GATE_INPUT_CLK	BIT(0)
+
+#define ADV7511_LOW_REFRESH_RATE_NONE		0x0
+#define ADV7511_LOW_REFRESH_RATE_24HZ		0x1
+#define ADV7511_LOW_REFRESH_RATE_25HZ		0x2
+#define ADV7511_LOW_REFRESH_RATE_30HZ		0x3
+
+#define ADV7511_AUDIO_CFG3_LEN_MASK		0x0f
+#define ADV7511_I2C_FREQ_ID_CFG_RATE_MASK	0xf0
+
+#define ADV7511_AUDIO_SOURCE_I2S		0
+#define ADV7511_AUDIO_SOURCE_SPDIF		1
+
+#define ADV7511_I2S_FORMAT_I2S			0
+#define ADV7511_I2S_FORMAT_RIGHT_J		1
+#define ADV7511_I2S_FORMAT_LEFT_J		2
+
+#define ADV7511_PACKET(p, x)	    ((p) * 0x20 + (x))
+#define ADV7511_PACKET_SDP(x)	    ADV7511_PACKET(0, x)
+#define ADV7511_PACKET_MPEG(x)	    ADV7511_PACKET(1, x)
+#define ADV7511_PACKET_ACP(x)	    ADV7511_PACKET(2, x)
+#define ADV7511_PACKET_ISRC1(x)	    ADV7511_PACKET(3, x)
+#define ADV7511_PACKET_ISRC2(x)	    ADV7511_PACKET(4, x)
+#define ADV7511_PACKET_GM(x)	    ADV7511_PACKET(5, x)
+#define ADV7511_PACKET_SPARE(x)	    ADV7511_PACKET(6, x)
+
+#define ADV7511_REG_CEC_TX_FRAME_HDR	0x00
+#define ADV7511_REG_CEC_TX_FRAME_DATA0	0x01
+#define ADV7511_REG_CEC_TX_FRAME_LEN	0x10
+#define ADV7511_REG_CEC_TX_ENABLE	0x11
+#define ADV7511_REG_CEC_TX_RETRY	0x12
+#define ADV7511_REG_CEC_TX_LOW_DRV_CNT	0x14
+#define ADV7511_REG_CEC_RX_FRAME_HDR	0x15
+#define ADV7511_REG_CEC_RX_FRAME_DATA0	0x16
+#define ADV7511_REG_CEC_RX_FRAME_LEN	0x25
+#define ADV7511_REG_CEC_RX_ENABLE	0x26
+#define ADV7511_REG_CEC_RX_BUFFERS	0x4a
+#define ADV7511_REG_CEC_LOG_ADDR_MASK	0x4b
+#define ADV7511_REG_CEC_LOG_ADDR_0_1	0x4c
+#define ADV7511_REG_CEC_LOG_ADDR_2	0x4d
+#define ADV7511_REG_CEC_CLK_DIV		0x4e
+#define ADV7511_REG_CEC_SOFT_RESET	0x50
+
+#define ADV7533_REG_CEC_OFFSET		0x70
+
+enum adv7511_input_clock {
+	ADV7511_INPUT_CLOCK_1X,
+	ADV7511_INPUT_CLOCK_2X,
+	ADV7511_INPUT_CLOCK_DDR,
+};
+
+enum adv7511_input_justification {
+	ADV7511_INPUT_JUSTIFICATION_EVENLY = 0,
+	ADV7511_INPUT_JUSTIFICATION_RIGHT = 1,
+	ADV7511_INPUT_JUSTIFICATION_LEFT = 2,
+};
+
+enum adv7511_input_sync_pulse {
+	ADV7511_INPUT_SYNC_PULSE_DE = 0,
+	ADV7511_INPUT_SYNC_PULSE_HSYNC = 1,
+	ADV7511_INPUT_SYNC_PULSE_VSYNC = 2,
+	ADV7511_INPUT_SYNC_PULSE_NONE = 3,
+};
+
+/**
+ * enum adv7511_sync_polarity - Polarity for the input sync signals
+ * @ADV7511_SYNC_POLARITY_PASSTHROUGH:  Sync polarity matches that of
+ *				       the currently configured mode.
+ * @ADV7511_SYNC_POLARITY_LOW:	    Sync polarity is low
+ * @ADV7511_SYNC_POLARITY_HIGH:	    Sync polarity is high
+ *
+ * If the polarity is set to either LOW or HIGH the driver will configure the
+ * ADV7511 to internally invert the sync signal if required to match the sync
+ * polarity setting for the currently selected output mode.
+ *
+ * If the polarity is set to PASSTHROUGH, the ADV7511 will route the signal
+ * unchanged. This is used when the upstream graphics core already generates
+ * the sync signals with the correct polarity.
+ */
+enum adv7511_sync_polarity {
+	ADV7511_SYNC_POLARITY_PASSTHROUGH,
+	ADV7511_SYNC_POLARITY_LOW,
+	ADV7511_SYNC_POLARITY_HIGH,
+};
+
+/**
+ * struct adv7511_link_config - Describes adv7511 hardware configuration
+ * @input_color_depth:		Number of bits per color component (8, 10 or 12)
+ * @input_colorspace:		The input colorspace (RGB, YUV444, YUV422)
+ * @input_clock:		The input video clock style (1x, 2x, DDR)
+ * @input_style:		The input component arrangement variant
+ * @input_justification:	Video input format bit justification
+ * @clock_delay:		Clock delay for the input clock (in ps)
+ * @embedded_sync:		Video input uses BT.656-style embedded sync
+ * @sync_pulse:			Select the sync pulse
+ * @vsync_polarity:		vsync input signal configuration
+ * @hsync_polarity:		hsync input signal configuration
+ */
+struct adv7511_link_config {
+	unsigned int input_color_depth;
+	enum hdmi_colorspace input_colorspace;
+	enum adv7511_input_clock input_clock;
+	unsigned int input_style;
+	enum adv7511_input_justification input_justification;
+
+	int clock_delay;
+
+	bool embedded_sync;
+	enum adv7511_input_sync_pulse sync_pulse;
+	enum adv7511_sync_polarity vsync_polarity;
+	enum adv7511_sync_polarity hsync_polarity;
+};
+
+/**
+ * enum adv7511_csc_scaling - Scaling factor for the ADV7511 CSC
+ * @ADV7511_CSC_SCALING_1: CSC results are not scaled
+ * @ADV7511_CSC_SCALING_2: CSC results are scaled by a factor of two
+ * @ADV7511_CSC_SCALING_4: CSC results are scalled by a factor of four
+ */
+enum adv7511_csc_scaling {
+	ADV7511_CSC_SCALING_1 = 0,
+	ADV7511_CSC_SCALING_2 = 1,
+	ADV7511_CSC_SCALING_4 = 2,
+};
+
+/**
+ * struct adv7511_video_config - Describes adv7511 hardware configuration
+ * @csc_enable:			Whether to enable color space conversion
+ * @csc_scaling_factor:		Color space conversion scaling factor
+ * @csc_coefficents:		Color space conversion coefficents
+ * @hdmi_mode:			Whether to use HDMI or DVI output mode
+ * @avi_infoframe:		HDMI infoframe
+ */
+struct adv7511_video_config {
+	bool csc_enable;
+	enum adv7511_csc_scaling csc_scaling_factor;
+	const uint16_t *csc_coefficents;
+
+	bool hdmi_mode;
+	struct hdmi_avi_infoframe avi_infoframe;
+};
+
+enum adv7511_type {
+	ADV7511,
+	ADV7533,
+};
+
+#define ADV7511_MAX_ADDRS 3
+
+struct adv7511 {
+	struct i2c_client *i2c_main;
+	struct i2c_client *i2c_edid;
+	struct i2c_client *i2c_packet;
+	struct i2c_client *i2c_cec;
+
+	struct regmap *regmap;
+	struct regmap *regmap_cec;
+	enum drm_connector_status status;
+	bool powered;
+
+	struct drm_display_mode curr_mode;
+
+	unsigned int f_tmds;
+	unsigned int f_audio;
+	unsigned int audio_source;
+
+	unsigned int current_edid_segment;
+	uint8_t edid_buf[256];
+	bool edid_read;
+
+	wait_queue_head_t wq;
+	struct work_struct hpd_work;
+
+	struct drm_bridge bridge;
+	struct drm_connector connector;
+
+	bool embedded_sync;
+	enum adv7511_sync_polarity vsync_polarity;
+	enum adv7511_sync_polarity hsync_polarity;
+	bool rgb;
+
+	struct gpio_desc *gpio_pd;
+
+	struct regulator_bulk_data *supplies;
+	unsigned int num_supplies;
+
+	/* ADV7533 DSI RX related params */
+	struct device_node *host_node;
+	struct mipi_dsi_device *dsi;
+	u8 num_dsi_lanes;
+	bool use_timing_gen;
+
+	enum adv7511_type type;
+	struct platform_device *audio_pdev;
+
+	struct cec_adapter *cec_adap;
+	u8   cec_addr[ADV7511_MAX_ADDRS];
+	u8   cec_valid_addrs;
+	bool cec_enabled_adap;
+	struct clk *cec_clk;
+	u32 cec_clk_freq;
+};
+
+#ifdef CONFIG_DRM_I2C_ADV7511_CEC
+int adv7511_cec_init(struct device *dev, struct adv7511 *adv7511);
+void adv7511_cec_irq_process(struct adv7511 *adv7511, unsigned int irq1);
+#else
+static inline int adv7511_cec_init(struct device *dev, struct adv7511 *adv7511)
+{
+	unsigned int offset = adv7511->type == ADV7533 ?
+						ADV7533_REG_CEC_OFFSET : 0;
+
+	regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL + offset,
+		     ADV7511_CEC_CTRL_POWER_DOWN);
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_DRM_I2C_ADV7533
+void adv7533_dsi_power_on(struct adv7511 *adv);
+void adv7533_dsi_power_off(struct adv7511 *adv);
+void adv7533_mode_set(struct adv7511 *adv, struct drm_display_mode *mode);
+int adv7533_patch_registers(struct adv7511 *adv);
+int adv7533_patch_cec_registers(struct adv7511 *adv);
+int adv7533_attach_dsi(struct adv7511 *adv);
+void adv7533_detach_dsi(struct adv7511 *adv);
+int adv7533_parse_dt(struct device_node *np, struct adv7511 *adv);
+#else
+static inline void adv7533_dsi_power_on(struct adv7511 *adv)
+{
+}
+
+static inline void adv7533_dsi_power_off(struct adv7511 *adv)
+{
+}
+
+static inline void adv7533_mode_set(struct adv7511 *adv,
+				    struct drm_display_mode *mode)
+{
+}
+
+static inline int adv7533_patch_registers(struct adv7511 *adv)
+{
+	return -ENODEV;
+}
+
+static inline int adv7533_patch_cec_registers(struct adv7511 *adv)
+{
+	return -ENODEV;
+}
+
+static inline int adv7533_attach_dsi(struct adv7511 *adv)
+{
+	return -ENODEV;
+}
+
+static inline void adv7533_detach_dsi(struct adv7511 *adv)
+{
+}
+
+static inline int adv7533_parse_dt(struct device_node *np, struct adv7511 *adv)
+{
+	return -ENODEV;
+}
+#endif
+
+#ifdef CONFIG_DRM_I2C_ADV7511_AUDIO
+int adv7511_audio_init(struct device *dev, struct adv7511 *adv7511);
+void adv7511_audio_exit(struct adv7511 *adv7511);
+#else /*CONFIG_DRM_I2C_ADV7511_AUDIO */
+static inline int adv7511_audio_init(struct device *dev, struct adv7511 *adv7511)
+{
+	return 0;
+}
+static inline void adv7511_audio_exit(struct adv7511 *adv7511)
+{
+}
+#endif /* CONFIG_DRM_I2C_ADV7511_AUDIO */
+
+#endif /* __DRM_I2C_ADV7511_H__ */
diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_audio.c b/drivers/gpu/drm/bridge/adv7511/adv7511_audio.c
new file mode 100644
index 000000000..3a218b56a
--- /dev/null
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_audio.c
@@ -0,0 +1,237 @@
+/*
+ * Analog Devices ADV7511 HDMI transmitter driver
+ *
+ * Copyright 2012 Analog Devices Inc.
+ * Copyright (c) 2016, Linaro Limited
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <sound/core.h>
+#include <sound/hdmi-codec.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <linux/of_graph.h>
+
+#include "adv7511.h"
+
+static void adv7511_calc_cts_n(unsigned int f_tmds, unsigned int fs,
+			       unsigned int *cts, unsigned int *n)
+{
+	switch (fs) {
+	case 32000:
+	case 48000:
+	case 96000:
+	case 192000:
+		*n = fs * 128 / 1000;
+		break;
+	case 44100:
+	case 88200:
+	case 176400:
+		*n = fs * 128 / 900;
+		break;
+	}
+
+	*cts = ((f_tmds * *n) / (128 * fs)) * 1000;
+}
+
+static int adv7511_update_cts_n(struct adv7511 *adv7511)
+{
+	unsigned int cts = 0;
+	unsigned int n = 0;
+
+	adv7511_calc_cts_n(adv7511->f_tmds, adv7511->f_audio, &cts, &n);
+
+	regmap_write(adv7511->regmap, ADV7511_REG_N0, (n >> 16) & 0xf);
+	regmap_write(adv7511->regmap, ADV7511_REG_N1, (n >> 8) & 0xff);
+	regmap_write(adv7511->regmap, ADV7511_REG_N2, n & 0xff);
+
+	regmap_write(adv7511->regmap, ADV7511_REG_CTS_MANUAL0,
+		     (cts >> 16) & 0xf);
+	regmap_write(adv7511->regmap, ADV7511_REG_CTS_MANUAL1,
+		     (cts >> 8) & 0xff);
+	regmap_write(adv7511->regmap, ADV7511_REG_CTS_MANUAL2,
+		     cts & 0xff);
+
+	return 0;
+}
+
+int adv7511_hdmi_hw_params(struct device *dev, void *data,
+			   struct hdmi_codec_daifmt *fmt,
+			   struct hdmi_codec_params *hparms)
+{
+	struct adv7511 *adv7511 = dev_get_drvdata(dev);
+	unsigned int audio_source, i2s_format = 0;
+	unsigned int invert_clock;
+	unsigned int rate;
+	unsigned int len;
+
+	switch (hparms->sample_rate) {
+	case 32000:
+		rate = ADV7511_SAMPLE_FREQ_32000;
+		break;
+	case 44100:
+		rate = ADV7511_SAMPLE_FREQ_44100;
+		break;
+	case 48000:
+		rate = ADV7511_SAMPLE_FREQ_48000;
+		break;
+	case 88200:
+		rate = ADV7511_SAMPLE_FREQ_88200;
+		break;
+	case 96000:
+		rate = ADV7511_SAMPLE_FREQ_96000;
+		break;
+	case 176400:
+		rate = ADV7511_SAMPLE_FREQ_176400;
+		break;
+	case 192000:
+		rate = ADV7511_SAMPLE_FREQ_192000;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (hparms->sample_width) {
+	case 16:
+		len = ADV7511_I2S_SAMPLE_LEN_16;
+		break;
+	case 18:
+		len = ADV7511_I2S_SAMPLE_LEN_18;
+		break;
+	case 20:
+		len = ADV7511_I2S_SAMPLE_LEN_20;
+		break;
+	case 24:
+		len = ADV7511_I2S_SAMPLE_LEN_24;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (fmt->fmt) {
+	case HDMI_I2S:
+		audio_source = ADV7511_AUDIO_SOURCE_I2S;
+		i2s_format = ADV7511_I2S_FORMAT_I2S;
+		break;
+	case HDMI_RIGHT_J:
+		audio_source = ADV7511_AUDIO_SOURCE_I2S;
+		i2s_format = ADV7511_I2S_FORMAT_RIGHT_J;
+		break;
+	case HDMI_LEFT_J:
+		audio_source = ADV7511_AUDIO_SOURCE_I2S;
+		i2s_format = ADV7511_I2S_FORMAT_LEFT_J;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	invert_clock = fmt->bit_clk_inv;
+
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_AUDIO_SOURCE, 0x70,
+			   audio_source << 4);
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_AUDIO_CONFIG, BIT(6),
+			   invert_clock << 6);
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_I2S_CONFIG, 0x03,
+			   i2s_format);
+
+	adv7511->audio_source = audio_source;
+
+	adv7511->f_audio = hparms->sample_rate;
+
+	adv7511_update_cts_n(adv7511);
+
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_AUDIO_CFG3,
+			   ADV7511_AUDIO_CFG3_LEN_MASK, len);
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_I2C_FREQ_ID_CFG,
+			   ADV7511_I2C_FREQ_ID_CFG_RATE_MASK, rate << 4);
+	regmap_write(adv7511->regmap, 0x73, 0x1);
+
+	return 0;
+}
+
+static int audio_startup(struct device *dev, void *data)
+{
+	struct adv7511 *adv7511 = dev_get_drvdata(dev);
+
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_AUDIO_CONFIG,
+				BIT(7), 0);
+
+	/* hide Audio infoframe updates */
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_INFOFRAME_UPDATE,
+				BIT(5), BIT(5));
+	/* enable N/CTS, enable Audio sample packets */
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_PACKET_ENABLE1,
+				BIT(5), BIT(5));
+	/* enable N/CTS */
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_PACKET_ENABLE1,
+				BIT(6), BIT(6));
+	/* not copyrighted */
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_AUDIO_CFG1,
+				BIT(5), BIT(5));
+	/* enable audio infoframes */
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_PACKET_ENABLE1,
+				BIT(3), BIT(3));
+	/* AV mute disable */
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_GC(0),
+				BIT(7) | BIT(6), BIT(7));
+	/* use Audio infoframe updated info */
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_GC(1),
+				BIT(5), 0);
+	return 0;
+}
+
+static void audio_shutdown(struct device *dev, void *data)
+{
+}
+
+static int adv7511_hdmi_i2s_get_dai_id(struct snd_soc_component *component,
+					struct device_node *endpoint)
+{
+	struct of_endpoint of_ep;
+	int ret;
+
+	ret = of_graph_parse_endpoint(endpoint, &of_ep);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * HDMI sound should be located as reg = <2>
+	 * Then, it is sound port 0
+	 */
+	if (of_ep.port == 2)
+		return 0;
+
+	return -EINVAL;
+}
+
+static const struct hdmi_codec_ops adv7511_codec_ops = {
+	.hw_params	= adv7511_hdmi_hw_params,
+	.audio_shutdown = audio_shutdown,
+	.audio_startup	= audio_startup,
+	.get_dai_id	= adv7511_hdmi_i2s_get_dai_id,
+};
+
+static const struct hdmi_codec_pdata codec_data = {
+	.ops = &adv7511_codec_ops,
+	.max_i2s_channels = 2,
+	.i2s = 1,
+};
+
+int adv7511_audio_init(struct device *dev, struct adv7511 *adv7511)
+{
+	adv7511->audio_pdev = platform_device_register_data(dev,
+					HDMI_CODEC_DRV_NAME,
+					PLATFORM_DEVID_AUTO,
+					&codec_data,
+					sizeof(codec_data));
+	return PTR_ERR_OR_ZERO(adv7511->audio_pdev);
+}
+
+void adv7511_audio_exit(struct adv7511 *adv7511)
+{
+	if (adv7511->audio_pdev) {
+		platform_device_unregister(adv7511->audio_pdev);
+		adv7511->audio_pdev = NULL;
+	}
+}
diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_cec.c b/drivers/gpu/drm/bridge/adv7511/adv7511_cec.c
new file mode 100644
index 000000000..a20a45c0b
--- /dev/null
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_cec.c
@@ -0,0 +1,349 @@
+/*
+ * adv7511_cec.c - Analog Devices ADV7511/33 cec driver
+ *
+ * Copyright 2017 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+
+#include <media/cec.h>
+
+#include "adv7511.h"
+
+#define ADV7511_INT1_CEC_MASK \
+	(ADV7511_INT1_CEC_TX_READY | ADV7511_INT1_CEC_TX_ARBIT_LOST | \
+	 ADV7511_INT1_CEC_TX_RETRY_TIMEOUT | ADV7511_INT1_CEC_RX_READY1)
+
+static void adv_cec_tx_raw_status(struct adv7511 *adv7511, u8 tx_raw_status)
+{
+	unsigned int offset = adv7511->type == ADV7533 ?
+					ADV7533_REG_CEC_OFFSET : 0;
+	unsigned int val;
+
+	if (regmap_read(adv7511->regmap_cec,
+			ADV7511_REG_CEC_TX_ENABLE + offset, &val))
+		return;
+
+	if ((val & 0x01) == 0)
+		return;
+
+	if (tx_raw_status & ADV7511_INT1_CEC_TX_ARBIT_LOST) {
+		cec_transmit_attempt_done(adv7511->cec_adap,
+					  CEC_TX_STATUS_ARB_LOST);
+		return;
+	}
+	if (tx_raw_status & ADV7511_INT1_CEC_TX_RETRY_TIMEOUT) {
+		u8 status;
+		u8 err_cnt = 0;
+		u8 nack_cnt = 0;
+		u8 low_drive_cnt = 0;
+		unsigned int cnt;
+
+		/*
+		 * We set this status bit since this hardware performs
+		 * retransmissions.
+		 */
+		status = CEC_TX_STATUS_MAX_RETRIES;
+		if (regmap_read(adv7511->regmap_cec,
+			    ADV7511_REG_CEC_TX_LOW_DRV_CNT + offset, &cnt)) {
+			err_cnt = 1;
+			status |= CEC_TX_STATUS_ERROR;
+		} else {
+			nack_cnt = cnt & 0xf;
+			if (nack_cnt)
+				status |= CEC_TX_STATUS_NACK;
+			low_drive_cnt = cnt >> 4;
+			if (low_drive_cnt)
+				status |= CEC_TX_STATUS_LOW_DRIVE;
+		}
+		cec_transmit_done(adv7511->cec_adap, status,
+				  0, nack_cnt, low_drive_cnt, err_cnt);
+		return;
+	}
+	if (tx_raw_status & ADV7511_INT1_CEC_TX_READY) {
+		cec_transmit_attempt_done(adv7511->cec_adap, CEC_TX_STATUS_OK);
+		return;
+	}
+}
+
+void adv7511_cec_irq_process(struct adv7511 *adv7511, unsigned int irq1)
+{
+	unsigned int offset = adv7511->type == ADV7533 ?
+					ADV7533_REG_CEC_OFFSET : 0;
+	const u32 irq_tx_mask = ADV7511_INT1_CEC_TX_READY |
+				ADV7511_INT1_CEC_TX_ARBIT_LOST |
+				ADV7511_INT1_CEC_TX_RETRY_TIMEOUT;
+	struct cec_msg msg = {};
+	unsigned int len;
+	unsigned int val;
+	u8 i;
+
+	if (irq1 & irq_tx_mask)
+		adv_cec_tx_raw_status(adv7511, irq1);
+
+	if (!(irq1 & ADV7511_INT1_CEC_RX_READY1))
+		return;
+
+	if (regmap_read(adv7511->regmap_cec,
+			ADV7511_REG_CEC_RX_FRAME_LEN + offset, &len))
+		return;
+
+	msg.len = len & 0x1f;
+
+	if (msg.len > 16)
+		msg.len = 16;
+
+	if (!msg.len)
+		return;
+
+	for (i = 0; i < msg.len; i++) {
+		regmap_read(adv7511->regmap_cec,
+			    i + ADV7511_REG_CEC_RX_FRAME_HDR + offset, &val);
+		msg.msg[i] = val;
+	}
+
+	/* toggle to re-enable rx 1 */
+	regmap_write(adv7511->regmap_cec,
+		     ADV7511_REG_CEC_RX_BUFFERS + offset, 1);
+	regmap_write(adv7511->regmap_cec,
+		     ADV7511_REG_CEC_RX_BUFFERS + offset, 0);
+	cec_received_msg(adv7511->cec_adap, &msg);
+}
+
+static int adv7511_cec_adap_enable(struct cec_adapter *adap, bool enable)
+{
+	struct adv7511 *adv7511 = cec_get_drvdata(adap);
+	unsigned int offset = adv7511->type == ADV7533 ?
+					ADV7533_REG_CEC_OFFSET : 0;
+
+	if (adv7511->i2c_cec == NULL)
+		return -EIO;
+
+	if (!adv7511->cec_enabled_adap && enable) {
+		/* power up cec section */
+		regmap_update_bits(adv7511->regmap_cec,
+				   ADV7511_REG_CEC_CLK_DIV + offset,
+				   0x03, 0x01);
+		/* legacy mode and clear all rx buffers */
+		regmap_write(adv7511->regmap_cec,
+			     ADV7511_REG_CEC_RX_BUFFERS + offset, 0x07);
+		regmap_write(adv7511->regmap_cec,
+			     ADV7511_REG_CEC_RX_BUFFERS + offset, 0);
+		/* initially disable tx */
+		regmap_update_bits(adv7511->regmap_cec,
+				   ADV7511_REG_CEC_TX_ENABLE + offset, 1, 0);
+		/* enabled irqs: */
+		/* tx: ready */
+		/* tx: arbitration lost */
+		/* tx: retry timeout */
+		/* rx: ready 1 */
+		regmap_update_bits(adv7511->regmap,
+				   ADV7511_REG_INT_ENABLE(1), 0x3f,
+				   ADV7511_INT1_CEC_MASK);
+	} else if (adv7511->cec_enabled_adap && !enable) {
+		regmap_update_bits(adv7511->regmap,
+				   ADV7511_REG_INT_ENABLE(1), 0x3f, 0);
+		/* disable address mask 1-3 */
+		regmap_update_bits(adv7511->regmap_cec,
+				   ADV7511_REG_CEC_LOG_ADDR_MASK + offset,
+				   0x70, 0x00);
+		/* power down cec section */
+		regmap_update_bits(adv7511->regmap_cec,
+				   ADV7511_REG_CEC_CLK_DIV + offset,
+				   0x03, 0x00);
+		adv7511->cec_valid_addrs = 0;
+	}
+	adv7511->cec_enabled_adap = enable;
+	return 0;
+}
+
+static int adv7511_cec_adap_log_addr(struct cec_adapter *adap, u8 addr)
+{
+	struct adv7511 *adv7511 = cec_get_drvdata(adap);
+	unsigned int offset = adv7511->type == ADV7533 ?
+					ADV7533_REG_CEC_OFFSET : 0;
+	unsigned int i, free_idx = ADV7511_MAX_ADDRS;
+
+	if (!adv7511->cec_enabled_adap)
+		return addr == CEC_LOG_ADDR_INVALID ? 0 : -EIO;
+
+	if (addr == CEC_LOG_ADDR_INVALID) {
+		regmap_update_bits(adv7511->regmap_cec,
+				   ADV7511_REG_CEC_LOG_ADDR_MASK + offset,
+				   0x70, 0);
+		adv7511->cec_valid_addrs = 0;
+		return 0;
+	}
+
+	for (i = 0; i < ADV7511_MAX_ADDRS; i++) {
+		bool is_valid = adv7511->cec_valid_addrs & (1 << i);
+
+		if (free_idx == ADV7511_MAX_ADDRS && !is_valid)
+			free_idx = i;
+		if (is_valid && adv7511->cec_addr[i] == addr)
+			return 0;
+	}
+	if (i == ADV7511_MAX_ADDRS) {
+		i = free_idx;
+		if (i == ADV7511_MAX_ADDRS)
+			return -ENXIO;
+	}
+	adv7511->cec_addr[i] = addr;
+	adv7511->cec_valid_addrs |= 1 << i;
+
+	switch (i) {
+	case 0:
+		/* enable address mask 0 */
+		regmap_update_bits(adv7511->regmap_cec,
+				   ADV7511_REG_CEC_LOG_ADDR_MASK + offset,
+				   0x10, 0x10);
+		/* set address for mask 0 */
+		regmap_update_bits(adv7511->regmap_cec,
+				   ADV7511_REG_CEC_LOG_ADDR_0_1 + offset,
+				   0x0f, addr);
+		break;
+	case 1:
+		/* enable address mask 1 */
+		regmap_update_bits(adv7511->regmap_cec,
+				   ADV7511_REG_CEC_LOG_ADDR_MASK + offset,
+				   0x20, 0x20);
+		/* set address for mask 1 */
+		regmap_update_bits(adv7511->regmap_cec,
+				   ADV7511_REG_CEC_LOG_ADDR_0_1 + offset,
+				   0xf0, addr << 4);
+		break;
+	case 2:
+		/* enable address mask 2 */
+		regmap_update_bits(adv7511->regmap_cec,
+				   ADV7511_REG_CEC_LOG_ADDR_MASK + offset,
+				   0x40, 0x40);
+		/* set address for mask 1 */
+		regmap_update_bits(adv7511->regmap_cec,
+				   ADV7511_REG_CEC_LOG_ADDR_2 + offset,
+				   0x0f, addr);
+		break;
+	}
+	return 0;
+}
+
+static int adv7511_cec_adap_transmit(struct cec_adapter *adap, u8 attempts,
+				     u32 signal_free_time, struct cec_msg *msg)
+{
+	struct adv7511 *adv7511 = cec_get_drvdata(adap);
+	unsigned int offset = adv7511->type == ADV7533 ?
+					ADV7533_REG_CEC_OFFSET : 0;
+	u8 len = msg->len;
+	unsigned int i;
+
+	/*
+	 * The number of retries is the number of attempts - 1, but retry
+	 * at least once. It's not clear if a value of 0 is allowed, so
+	 * let's do at least one retry.
+	 */
+	regmap_update_bits(adv7511->regmap_cec,
+			   ADV7511_REG_CEC_TX_RETRY + offset,
+			   0x70, max(1, attempts - 1) << 4);
+
+	/* blocking, clear cec tx irq status */
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_INT(1), 0x38, 0x38);
+
+	/* write data */
+	for (i = 0; i < len; i++)
+		regmap_write(adv7511->regmap_cec,
+			     i + ADV7511_REG_CEC_TX_FRAME_HDR + offset,
+			     msg->msg[i]);
+
+	/* set length (data + header) */
+	regmap_write(adv7511->regmap_cec,
+		     ADV7511_REG_CEC_TX_FRAME_LEN + offset, len);
+	/* start transmit, enable tx */
+	regmap_write(adv7511->regmap_cec,
+		     ADV7511_REG_CEC_TX_ENABLE + offset, 0x01);
+	return 0;
+}
+
+static const struct cec_adap_ops adv7511_cec_adap_ops = {
+	.adap_enable = adv7511_cec_adap_enable,
+	.adap_log_addr = adv7511_cec_adap_log_addr,
+	.adap_transmit = adv7511_cec_adap_transmit,
+};
+
+static int adv7511_cec_parse_dt(struct device *dev, struct adv7511 *adv7511)
+{
+	adv7511->cec_clk = devm_clk_get(dev, "cec");
+	if (IS_ERR(adv7511->cec_clk)) {
+		int ret = PTR_ERR(adv7511->cec_clk);
+
+		adv7511->cec_clk = NULL;
+		return ret;
+	}
+	clk_prepare_enable(adv7511->cec_clk);
+	adv7511->cec_clk_freq = clk_get_rate(adv7511->cec_clk);
+	return 0;
+}
+
+int adv7511_cec_init(struct device *dev, struct adv7511 *adv7511)
+{
+	unsigned int offset = adv7511->type == ADV7533 ?
+						ADV7533_REG_CEC_OFFSET : 0;
+	int ret = adv7511_cec_parse_dt(dev, adv7511);
+
+	if (ret)
+		goto err_cec_parse_dt;
+
+	adv7511->cec_adap = cec_allocate_adapter(&adv7511_cec_adap_ops,
+		adv7511, dev_name(dev), CEC_CAP_DEFAULTS, ADV7511_MAX_ADDRS);
+	if (IS_ERR(adv7511->cec_adap)) {
+		ret = PTR_ERR(adv7511->cec_adap);
+		goto err_cec_alloc;
+	}
+
+	regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL + offset, 0);
+	/* cec soft reset */
+	regmap_write(adv7511->regmap_cec,
+		     ADV7511_REG_CEC_SOFT_RESET + offset, 0x01);
+	regmap_write(adv7511->regmap_cec,
+		     ADV7511_REG_CEC_SOFT_RESET + offset, 0x00);
+
+	/* legacy mode */
+	regmap_write(adv7511->regmap_cec,
+		     ADV7511_REG_CEC_RX_BUFFERS + offset, 0x00);
+
+	regmap_write(adv7511->regmap_cec,
+		     ADV7511_REG_CEC_CLK_DIV + offset,
+		     ((adv7511->cec_clk_freq / 750000) - 1) << 2);
+
+	ret = cec_register_adapter(adv7511->cec_adap, dev);
+	if (ret)
+		goto err_cec_register;
+	return 0;
+
+err_cec_register:
+	cec_delete_adapter(adv7511->cec_adap);
+	adv7511->cec_adap = NULL;
+err_cec_alloc:
+	dev_info(dev, "Initializing CEC failed with error %d, disabling CEC\n",
+		 ret);
+err_cec_parse_dt:
+	regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL + offset,
+		     ADV7511_CEC_CTRL_POWER_DOWN);
+	return ret == -EPROBE_DEFER ? ret : 0;
+}
diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
new file mode 100644
index 000000000..b6e7cc908
--- /dev/null
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
@@ -0,0 +1,1322 @@
+/*
+ * Analog Devices ADV7511 HDMI transmitter driver
+ *
+ * Copyright 2012 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+
+#include <drm/drmP.h>
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_edid.h>
+
+#include <media/cec.h>
+
+#include "adv7511.h"
+
+/* ADI recommended values for proper operation. */
+static const struct reg_sequence adv7511_fixed_registers[] = {
+	{ 0x98, 0x03 },
+	{ 0x9a, 0xe0 },
+	{ 0x9c, 0x30 },
+	{ 0x9d, 0x61 },
+	{ 0xa2, 0xa4 },
+	{ 0xa3, 0xa4 },
+	{ 0xe0, 0xd0 },
+	{ 0xf9, 0x00 },
+	{ 0x55, 0x02 },
+};
+
+/* -----------------------------------------------------------------------------
+ * Register access
+ */
+
+static const uint8_t adv7511_register_defaults[] = {
+	0x12, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 00 */
+	0x00, 0x00, 0x01, 0x0e, 0xbc, 0x18, 0x01, 0x13,
+	0x25, 0x37, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 10 */
+	0x46, 0x62, 0x04, 0xa8, 0x00, 0x00, 0x1c, 0x84,
+	0x1c, 0xbf, 0x04, 0xa8, 0x1e, 0x70, 0x02, 0x1e, /* 20 */
+	0x00, 0x00, 0x04, 0xa8, 0x08, 0x12, 0x1b, 0xac,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 30 */
+	0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0xb0,
+	0x00, 0x50, 0x90, 0x7e, 0x79, 0x70, 0x00, 0x00, /* 40 */
+	0x00, 0xa8, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x02, 0x0d, 0x00, 0x00, 0x00, 0x00, /* 50 */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 60 */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x01, 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 70 */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 80 */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0xc0, 0x00, 0x00, 0x00, /* 90 */
+	0x0b, 0x02, 0x00, 0x18, 0x5a, 0x60, 0x00, 0x00,
+	0x00, 0x00, 0x80, 0x80, 0x08, 0x04, 0x00, 0x00, /* a0 */
+	0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x14,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* b0 */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* c0 */
+	0x00, 0x03, 0x00, 0x00, 0x02, 0x00, 0x01, 0x04,
+	0x30, 0xff, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00, /* d0 */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x01,
+	0x80, 0x75, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, /* e0 */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x75, 0x11, 0x00, /* f0 */
+	0x00, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+};
+
+static bool adv7511_register_volatile(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case ADV7511_REG_CHIP_REVISION:
+	case ADV7511_REG_SPDIF_FREQ:
+	case ADV7511_REG_CTS_AUTOMATIC1:
+	case ADV7511_REG_CTS_AUTOMATIC2:
+	case ADV7511_REG_VIC_DETECTED:
+	case ADV7511_REG_VIC_SEND:
+	case ADV7511_REG_AUX_VIC_DETECTED:
+	case ADV7511_REG_STATUS:
+	case ADV7511_REG_GC(1):
+	case ADV7511_REG_INT(0):
+	case ADV7511_REG_INT(1):
+	case ADV7511_REG_PLL_STATUS:
+	case ADV7511_REG_AN(0):
+	case ADV7511_REG_AN(1):
+	case ADV7511_REG_AN(2):
+	case ADV7511_REG_AN(3):
+	case ADV7511_REG_AN(4):
+	case ADV7511_REG_AN(5):
+	case ADV7511_REG_AN(6):
+	case ADV7511_REG_AN(7):
+	case ADV7511_REG_HDCP_STATUS:
+	case ADV7511_REG_BCAPS:
+	case ADV7511_REG_BKSV(0):
+	case ADV7511_REG_BKSV(1):
+	case ADV7511_REG_BKSV(2):
+	case ADV7511_REG_BKSV(3):
+	case ADV7511_REG_BKSV(4):
+	case ADV7511_REG_DDC_STATUS:
+	case ADV7511_REG_EDID_READ_CTRL:
+	case ADV7511_REG_BSTATUS(0):
+	case ADV7511_REG_BSTATUS(1):
+	case ADV7511_REG_CHIP_ID_HIGH:
+	case ADV7511_REG_CHIP_ID_LOW:
+		return true;
+	}
+
+	return false;
+}
+
+static const struct regmap_config adv7511_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = 0xff,
+	.cache_type = REGCACHE_RBTREE,
+	.reg_defaults_raw = adv7511_register_defaults,
+	.num_reg_defaults_raw = ARRAY_SIZE(adv7511_register_defaults),
+
+	.volatile_reg = adv7511_register_volatile,
+};
+
+/* -----------------------------------------------------------------------------
+ * Hardware configuration
+ */
+
+static void adv7511_set_colormap(struct adv7511 *adv7511, bool enable,
+				 const uint16_t *coeff,
+				 unsigned int scaling_factor)
+{
+	unsigned int i;
+
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_CSC_UPPER(1),
+			   ADV7511_CSC_UPDATE_MODE, ADV7511_CSC_UPDATE_MODE);
+
+	if (enable) {
+		for (i = 0; i < 12; ++i) {
+			regmap_update_bits(adv7511->regmap,
+					   ADV7511_REG_CSC_UPPER(i),
+					   0x1f, coeff[i] >> 8);
+			regmap_write(adv7511->regmap,
+				     ADV7511_REG_CSC_LOWER(i),
+				     coeff[i] & 0xff);
+		}
+	}
+
+	if (enable)
+		regmap_update_bits(adv7511->regmap, ADV7511_REG_CSC_UPPER(0),
+				   0xe0, 0x80 | (scaling_factor << 5));
+	else
+		regmap_update_bits(adv7511->regmap, ADV7511_REG_CSC_UPPER(0),
+				   0x80, 0x00);
+
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_CSC_UPPER(1),
+			   ADV7511_CSC_UPDATE_MODE, 0);
+}
+
+static int adv7511_packet_enable(struct adv7511 *adv7511, unsigned int packet)
+{
+	if (packet & 0xff)
+		regmap_update_bits(adv7511->regmap, ADV7511_REG_PACKET_ENABLE0,
+				   packet, 0xff);
+
+	if (packet & 0xff00) {
+		packet >>= 8;
+		regmap_update_bits(adv7511->regmap, ADV7511_REG_PACKET_ENABLE1,
+				   packet, 0xff);
+	}
+
+	return 0;
+}
+
+static int adv7511_packet_disable(struct adv7511 *adv7511, unsigned int packet)
+{
+	if (packet & 0xff)
+		regmap_update_bits(adv7511->regmap, ADV7511_REG_PACKET_ENABLE0,
+				   packet, 0x00);
+
+	if (packet & 0xff00) {
+		packet >>= 8;
+		regmap_update_bits(adv7511->regmap, ADV7511_REG_PACKET_ENABLE1,
+				   packet, 0x00);
+	}
+
+	return 0;
+}
+
+/* Coefficients for adv7511 color space conversion */
+static const uint16_t adv7511_csc_ycbcr_to_rgb[] = {
+	0x0734, 0x04ad, 0x0000, 0x1c1b,
+	0x1ddc, 0x04ad, 0x1f24, 0x0135,
+	0x0000, 0x04ad, 0x087c, 0x1b77,
+};
+
+static void adv7511_set_config_csc(struct adv7511 *adv7511,
+				   struct drm_connector *connector,
+				   bool rgb, bool hdmi_mode)
+{
+	struct adv7511_video_config config;
+	bool output_format_422, output_format_ycbcr;
+	unsigned int mode;
+	uint8_t infoframe[17];
+
+	config.hdmi_mode = hdmi_mode;
+
+	hdmi_avi_infoframe_init(&config.avi_infoframe);
+
+	config.avi_infoframe.scan_mode = HDMI_SCAN_MODE_UNDERSCAN;
+
+	if (rgb) {
+		config.csc_enable = false;
+		config.avi_infoframe.colorspace = HDMI_COLORSPACE_RGB;
+	} else {
+		config.csc_scaling_factor = ADV7511_CSC_SCALING_4;
+		config.csc_coefficents = adv7511_csc_ycbcr_to_rgb;
+
+		if ((connector->display_info.color_formats &
+		     DRM_COLOR_FORMAT_YCRCB422) &&
+		    config.hdmi_mode) {
+			config.csc_enable = false;
+			config.avi_infoframe.colorspace =
+				HDMI_COLORSPACE_YUV422;
+		} else {
+			config.csc_enable = true;
+			config.avi_infoframe.colorspace = HDMI_COLORSPACE_RGB;
+		}
+	}
+
+	if (config.hdmi_mode) {
+		mode = ADV7511_HDMI_CFG_MODE_HDMI;
+
+		switch (config.avi_infoframe.colorspace) {
+		case HDMI_COLORSPACE_YUV444:
+			output_format_422 = false;
+			output_format_ycbcr = true;
+			break;
+		case HDMI_COLORSPACE_YUV422:
+			output_format_422 = true;
+			output_format_ycbcr = true;
+			break;
+		default:
+			output_format_422 = false;
+			output_format_ycbcr = false;
+			break;
+		}
+	} else {
+		mode = ADV7511_HDMI_CFG_MODE_DVI;
+		output_format_422 = false;
+		output_format_ycbcr = false;
+	}
+
+	adv7511_packet_disable(adv7511, ADV7511_PACKET_ENABLE_AVI_INFOFRAME);
+
+	adv7511_set_colormap(adv7511, config.csc_enable,
+			     config.csc_coefficents,
+			     config.csc_scaling_factor);
+
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_VIDEO_INPUT_CFG1, 0x81,
+			   (output_format_422 << 7) | output_format_ycbcr);
+
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_HDCP_HDMI_CFG,
+			   ADV7511_HDMI_CFG_MODE_MASK, mode);
+
+	hdmi_avi_infoframe_pack(&config.avi_infoframe, infoframe,
+				sizeof(infoframe));
+
+	/* The AVI infoframe id is not configurable */
+	regmap_bulk_write(adv7511->regmap, ADV7511_REG_AVI_INFOFRAME_VERSION,
+			  infoframe + 1, sizeof(infoframe) - 1);
+
+	adv7511_packet_enable(adv7511, ADV7511_PACKET_ENABLE_AVI_INFOFRAME);
+}
+
+static void adv7511_set_link_config(struct adv7511 *adv7511,
+				    const struct adv7511_link_config *config)
+{
+	/*
+	 * The input style values documented in the datasheet don't match the
+	 * hardware register field values :-(
+	 */
+	static const unsigned int input_styles[4] = { 0, 2, 1, 3 };
+
+	unsigned int clock_delay;
+	unsigned int color_depth;
+	unsigned int input_id;
+
+	clock_delay = (config->clock_delay + 1200) / 400;
+	color_depth = config->input_color_depth == 8 ? 3
+		    : (config->input_color_depth == 10 ? 1 : 2);
+
+	/* TODO Support input ID 6 */
+	if (config->input_colorspace != HDMI_COLORSPACE_YUV422)
+		input_id = config->input_clock == ADV7511_INPUT_CLOCK_DDR
+			 ? 5 : 0;
+	else if (config->input_clock == ADV7511_INPUT_CLOCK_DDR)
+		input_id = config->embedded_sync ? 8 : 7;
+	else if (config->input_clock == ADV7511_INPUT_CLOCK_2X)
+		input_id = config->embedded_sync ? 4 : 3;
+	else
+		input_id = config->embedded_sync ? 2 : 1;
+
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_I2C_FREQ_ID_CFG, 0xf,
+			   input_id);
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_VIDEO_INPUT_CFG1, 0x7e,
+			   (color_depth << 4) |
+			   (input_styles[config->input_style] << 2));
+	regmap_write(adv7511->regmap, ADV7511_REG_VIDEO_INPUT_CFG2,
+		     config->input_justification << 3);
+	regmap_write(adv7511->regmap, ADV7511_REG_TIMING_GEN_SEQ,
+		     config->sync_pulse << 2);
+
+	regmap_write(adv7511->regmap, 0xba, clock_delay << 5);
+
+	adv7511->embedded_sync = config->embedded_sync;
+	adv7511->hsync_polarity = config->hsync_polarity;
+	adv7511->vsync_polarity = config->vsync_polarity;
+	adv7511->rgb = config->input_colorspace == HDMI_COLORSPACE_RGB;
+}
+
+static void __adv7511_power_on(struct adv7511 *adv7511)
+{
+	adv7511->current_edid_segment = -1;
+
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
+			   ADV7511_POWER_POWER_DOWN, 0);
+	if (adv7511->i2c_main->irq) {
+		/*
+		 * Documentation says the INT_ENABLE registers are reset in
+		 * POWER_DOWN mode. My 7511w preserved the bits, however.
+		 * Still, let's be safe and stick to the documentation.
+		 */
+		regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(0),
+			     ADV7511_INT0_EDID_READY | ADV7511_INT0_HPD);
+		regmap_update_bits(adv7511->regmap,
+				   ADV7511_REG_INT_ENABLE(1),
+				   ADV7511_INT1_DDC_ERROR,
+				   ADV7511_INT1_DDC_ERROR);
+	}
+
+	/*
+	 * Per spec it is allowed to pulse the HPD signal to indicate that the
+	 * EDID information has changed. Some monitors do this when they wakeup
+	 * from standby or are enabled. When the HPD goes low the adv7511 is
+	 * reset and the outputs are disabled which might cause the monitor to
+	 * go to standby again. To avoid this we ignore the HPD pin for the
+	 * first few seconds after enabling the output.
+	 */
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2,
+			   ADV7511_REG_POWER2_HPD_SRC_MASK,
+			   ADV7511_REG_POWER2_HPD_SRC_NONE);
+}
+
+static void adv7511_power_on(struct adv7511 *adv7511)
+{
+	__adv7511_power_on(adv7511);
+
+	/*
+	 * Most of the registers are reset during power down or when HPD is low.
+	 */
+	regcache_sync(adv7511->regmap);
+
+	if (adv7511->type == ADV7533)
+		adv7533_dsi_power_on(adv7511);
+	adv7511->powered = true;
+}
+
+static void __adv7511_power_off(struct adv7511 *adv7511)
+{
+	/* TODO: setup additional power down modes */
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
+			   ADV7511_POWER_POWER_DOWN,
+			   ADV7511_POWER_POWER_DOWN);
+	regmap_update_bits(adv7511->regmap,
+			   ADV7511_REG_INT_ENABLE(1),
+			   ADV7511_INT1_DDC_ERROR, 0);
+	regcache_mark_dirty(adv7511->regmap);
+}
+
+static void adv7511_power_off(struct adv7511 *adv7511)
+{
+	__adv7511_power_off(adv7511);
+	if (adv7511->type == ADV7533)
+		adv7533_dsi_power_off(adv7511);
+	adv7511->powered = false;
+}
+
+/* -----------------------------------------------------------------------------
+ * Interrupt and hotplug detection
+ */
+
+static bool adv7511_hpd(struct adv7511 *adv7511)
+{
+	unsigned int irq0;
+	int ret;
+
+	ret = regmap_read(adv7511->regmap, ADV7511_REG_INT(0), &irq0);
+	if (ret < 0)
+		return false;
+
+	if (irq0 & ADV7511_INT0_HPD) {
+		regmap_write(adv7511->regmap, ADV7511_REG_INT(0),
+			     ADV7511_INT0_HPD);
+		return true;
+	}
+
+	return false;
+}
+
+static void adv7511_hpd_work(struct work_struct *work)
+{
+	struct adv7511 *adv7511 = container_of(work, struct adv7511, hpd_work);
+	enum drm_connector_status status;
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(adv7511->regmap, ADV7511_REG_STATUS, &val);
+	if (ret < 0)
+		status = connector_status_disconnected;
+	else if (val & ADV7511_STATUS_HPD)
+		status = connector_status_connected;
+	else
+		status = connector_status_disconnected;
+
+	/*
+	 * The bridge resets its registers on unplug. So when we get a plug
+	 * event and we're already supposed to be powered, cycle the bridge to
+	 * restore its state.
+	 */
+	if (status == connector_status_connected &&
+	    adv7511->connector.status == connector_status_disconnected &&
+	    adv7511->powered) {
+		regcache_mark_dirty(adv7511->regmap);
+		adv7511_power_on(adv7511);
+	}
+
+	if (adv7511->connector.status != status) {
+		adv7511->connector.status = status;
+		if (status == connector_status_disconnected)
+			cec_phys_addr_invalidate(adv7511->cec_adap);
+		drm_kms_helper_hotplug_event(adv7511->connector.dev);
+	}
+}
+
+static int adv7511_irq_process(struct adv7511 *adv7511, bool process_hpd)
+{
+	unsigned int irq0, irq1;
+	int ret;
+
+	ret = regmap_read(adv7511->regmap, ADV7511_REG_INT(0), &irq0);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_read(adv7511->regmap, ADV7511_REG_INT(1), &irq1);
+	if (ret < 0)
+		return ret;
+
+	regmap_write(adv7511->regmap, ADV7511_REG_INT(0), irq0);
+	regmap_write(adv7511->regmap, ADV7511_REG_INT(1), irq1);
+
+	if (process_hpd && irq0 & ADV7511_INT0_HPD && adv7511->bridge.encoder)
+		schedule_work(&adv7511->hpd_work);
+
+	if (irq0 & ADV7511_INT0_EDID_READY || irq1 & ADV7511_INT1_DDC_ERROR) {
+		adv7511->edid_read = true;
+
+		if (adv7511->i2c_main->irq)
+			wake_up_all(&adv7511->wq);
+	}
+
+#ifdef CONFIG_DRM_I2C_ADV7511_CEC
+	adv7511_cec_irq_process(adv7511, irq1);
+#endif
+
+	return 0;
+}
+
+static irqreturn_t adv7511_irq_handler(int irq, void *devid)
+{
+	struct adv7511 *adv7511 = devid;
+	int ret;
+
+	ret = adv7511_irq_process(adv7511, true);
+	return ret < 0 ? IRQ_NONE : IRQ_HANDLED;
+}
+
+/* -----------------------------------------------------------------------------
+ * EDID retrieval
+ */
+
+static int adv7511_wait_for_edid(struct adv7511 *adv7511, int timeout)
+{
+	int ret;
+
+	if (adv7511->i2c_main->irq) {
+		ret = wait_event_interruptible_timeout(adv7511->wq,
+				adv7511->edid_read, msecs_to_jiffies(timeout));
+	} else {
+		for (; timeout > 0; timeout -= 25) {
+			ret = adv7511_irq_process(adv7511, false);
+			if (ret < 0)
+				break;
+
+			if (adv7511->edid_read)
+				break;
+
+			msleep(25);
+		}
+	}
+
+	return adv7511->edid_read ? 0 : -EIO;
+}
+
+static int adv7511_get_edid_block(void *data, u8 *buf, unsigned int block,
+				  size_t len)
+{
+	struct adv7511 *adv7511 = data;
+	struct i2c_msg xfer[2];
+	uint8_t offset;
+	unsigned int i;
+	int ret;
+
+	if (len > 128)
+		return -EINVAL;
+
+	if (adv7511->current_edid_segment != block / 2) {
+		unsigned int status;
+
+		ret = regmap_read(adv7511->regmap, ADV7511_REG_DDC_STATUS,
+				  &status);
+		if (ret < 0)
+			return ret;
+
+		if (status != 2) {
+			adv7511->edid_read = false;
+			regmap_write(adv7511->regmap, ADV7511_REG_EDID_SEGMENT,
+				     block);
+			ret = adv7511_wait_for_edid(adv7511, 200);
+			if (ret < 0)
+				return ret;
+		}
+
+		/* Break this apart, hopefully more I2C controllers will
+		 * support 64 byte transfers than 256 byte transfers
+		 */
+
+		xfer[0].addr = adv7511->i2c_edid->addr;
+		xfer[0].flags = 0;
+		xfer[0].len = 1;
+		xfer[0].buf = &offset;
+		xfer[1].addr = adv7511->i2c_edid->addr;
+		xfer[1].flags = I2C_M_RD;
+		xfer[1].len = 64;
+		xfer[1].buf = adv7511->edid_buf;
+
+		offset = 0;
+
+		for (i = 0; i < 4; ++i) {
+			ret = i2c_transfer(adv7511->i2c_edid->adapter, xfer,
+					   ARRAY_SIZE(xfer));
+			if (ret < 0)
+				return ret;
+			else if (ret != 2)
+				return -EIO;
+
+			xfer[1].buf += 64;
+			offset += 64;
+		}
+
+		adv7511->current_edid_segment = block / 2;
+	}
+
+	if (block % 2 == 0)
+		memcpy(buf, adv7511->edid_buf, len);
+	else
+		memcpy(buf, adv7511->edid_buf + 128, len);
+
+	return 0;
+}
+
+/* -----------------------------------------------------------------------------
+ * ADV75xx helpers
+ */
+
+static int adv7511_get_modes(struct adv7511 *adv7511,
+			     struct drm_connector *connector)
+{
+	struct edid *edid;
+	unsigned int count;
+
+	/* Reading the EDID only works if the device is powered */
+	if (!adv7511->powered) {
+		unsigned int edid_i2c_addr =
+					(adv7511->i2c_edid->addr << 1);
+
+		__adv7511_power_on(adv7511);
+
+		/* Reset the EDID_I2C_ADDR register as it might be cleared */
+		regmap_write(adv7511->regmap, ADV7511_REG_EDID_I2C_ADDR,
+			     edid_i2c_addr);
+	}
+
+	edid = drm_do_get_edid(connector, adv7511_get_edid_block, adv7511);
+
+	if (!adv7511->powered)
+		__adv7511_power_off(adv7511);
+
+
+	drm_connector_update_edid_property(connector, edid);
+	count = drm_add_edid_modes(connector, edid);
+
+	adv7511_set_config_csc(adv7511, connector, adv7511->rgb,
+			       drm_detect_hdmi_monitor(edid));
+
+	cec_s_phys_addr_from_edid(adv7511->cec_adap, edid);
+
+	kfree(edid);
+
+	return count;
+}
+
+static enum drm_connector_status
+adv7511_detect(struct adv7511 *adv7511, struct drm_connector *connector)
+{
+	enum drm_connector_status status;
+	unsigned int val;
+	bool hpd;
+	int ret;
+
+	ret = regmap_read(adv7511->regmap, ADV7511_REG_STATUS, &val);
+	if (ret < 0)
+		return connector_status_disconnected;
+
+	if (val & ADV7511_STATUS_HPD)
+		status = connector_status_connected;
+	else
+		status = connector_status_disconnected;
+
+	hpd = adv7511_hpd(adv7511);
+
+	/* The chip resets itself when the cable is disconnected, so in case
+	 * there is a pending HPD interrupt and the cable is connected there was
+	 * at least one transition from disconnected to connected and the chip
+	 * has to be reinitialized. */
+	if (status == connector_status_connected && hpd && adv7511->powered) {
+		regcache_mark_dirty(adv7511->regmap);
+		adv7511_power_on(adv7511);
+		adv7511_get_modes(adv7511, connector);
+		if (adv7511->status == connector_status_connected)
+			status = connector_status_disconnected;
+	} else {
+		/* Renable HPD sensing */
+		regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2,
+				   ADV7511_REG_POWER2_HPD_SRC_MASK,
+				   ADV7511_REG_POWER2_HPD_SRC_BOTH);
+	}
+
+	adv7511->status = status;
+	return status;
+}
+
+static enum drm_mode_status adv7511_mode_valid(struct adv7511 *adv7511,
+			      struct drm_display_mode *mode)
+{
+	if (mode->clock > 165000)
+		return MODE_CLOCK_HIGH;
+
+	return MODE_OK;
+}
+
+static void adv7511_mode_set(struct adv7511 *adv7511,
+			     struct drm_display_mode *mode,
+			     struct drm_display_mode *adj_mode)
+{
+	unsigned int low_refresh_rate;
+	unsigned int hsync_polarity = 0;
+	unsigned int vsync_polarity = 0;
+
+	if (adv7511->embedded_sync) {
+		unsigned int hsync_offset, hsync_len;
+		unsigned int vsync_offset, vsync_len;
+
+		hsync_offset = adj_mode->crtc_hsync_start -
+			       adj_mode->crtc_hdisplay;
+		vsync_offset = adj_mode->crtc_vsync_start -
+			       adj_mode->crtc_vdisplay;
+		hsync_len = adj_mode->crtc_hsync_end -
+			    adj_mode->crtc_hsync_start;
+		vsync_len = adj_mode->crtc_vsync_end -
+			    adj_mode->crtc_vsync_start;
+
+		/* The hardware vsync generator has a off-by-one bug */
+		vsync_offset += 1;
+
+		regmap_write(adv7511->regmap, ADV7511_REG_HSYNC_PLACEMENT_MSB,
+			     ((hsync_offset >> 10) & 0x7) << 5);
+		regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(0),
+			     (hsync_offset >> 2) & 0xff);
+		regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(1),
+			     ((hsync_offset & 0x3) << 6) |
+			     ((hsync_len >> 4) & 0x3f));
+		regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(2),
+			     ((hsync_len & 0xf) << 4) |
+			     ((vsync_offset >> 6) & 0xf));
+		regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(3),
+			     ((vsync_offset & 0x3f) << 2) |
+			     ((vsync_len >> 8) & 0x3));
+		regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(4),
+			     vsync_len & 0xff);
+
+		hsync_polarity = !(adj_mode->flags & DRM_MODE_FLAG_PHSYNC);
+		vsync_polarity = !(adj_mode->flags & DRM_MODE_FLAG_PVSYNC);
+	} else {
+		enum adv7511_sync_polarity mode_hsync_polarity;
+		enum adv7511_sync_polarity mode_vsync_polarity;
+
+		/**
+		 * If the input signal is always low or always high we want to
+		 * invert or let it passthrough depending on the polarity of the
+		 * current mode.
+		 **/
+		if (adj_mode->flags & DRM_MODE_FLAG_NHSYNC)
+			mode_hsync_polarity = ADV7511_SYNC_POLARITY_LOW;
+		else
+			mode_hsync_polarity = ADV7511_SYNC_POLARITY_HIGH;
+
+		if (adj_mode->flags & DRM_MODE_FLAG_NVSYNC)
+			mode_vsync_polarity = ADV7511_SYNC_POLARITY_LOW;
+		else
+			mode_vsync_polarity = ADV7511_SYNC_POLARITY_HIGH;
+
+		if (adv7511->hsync_polarity != mode_hsync_polarity &&
+		    adv7511->hsync_polarity !=
+		    ADV7511_SYNC_POLARITY_PASSTHROUGH)
+			hsync_polarity = 1;
+
+		if (adv7511->vsync_polarity != mode_vsync_polarity &&
+		    adv7511->vsync_polarity !=
+		    ADV7511_SYNC_POLARITY_PASSTHROUGH)
+			vsync_polarity = 1;
+	}
+
+	if (drm_mode_vrefresh(mode) <= 24)
+		low_refresh_rate = ADV7511_LOW_REFRESH_RATE_24HZ;
+	else if (drm_mode_vrefresh(mode) <= 25)
+		low_refresh_rate = ADV7511_LOW_REFRESH_RATE_25HZ;
+	else if (drm_mode_vrefresh(mode) <= 30)
+		low_refresh_rate = ADV7511_LOW_REFRESH_RATE_30HZ;
+	else
+		low_refresh_rate = ADV7511_LOW_REFRESH_RATE_NONE;
+
+	regmap_update_bits(adv7511->regmap, 0xfb,
+		0x6, low_refresh_rate << 1);
+	regmap_update_bits(adv7511->regmap, 0x17,
+		0x60, (vsync_polarity << 6) | (hsync_polarity << 5));
+
+	if (adv7511->type == ADV7533)
+		adv7533_mode_set(adv7511, adj_mode);
+
+	drm_mode_copy(&adv7511->curr_mode, adj_mode);
+
+	/*
+	 * TODO Test first order 4:2:2 to 4:4:4 up conversion method, which is
+	 * supposed to give better results.
+	 */
+
+	adv7511->f_tmds = mode->clock;
+}
+
+/* Connector funcs */
+static struct adv7511 *connector_to_adv7511(struct drm_connector *connector)
+{
+	return container_of(connector, struct adv7511, connector);
+}
+
+static int adv7511_connector_get_modes(struct drm_connector *connector)
+{
+	struct adv7511 *adv = connector_to_adv7511(connector);
+
+	return adv7511_get_modes(adv, connector);
+}
+
+static enum drm_mode_status
+adv7511_connector_mode_valid(struct drm_connector *connector,
+			     struct drm_display_mode *mode)
+{
+	struct adv7511 *adv = connector_to_adv7511(connector);
+
+	return adv7511_mode_valid(adv, mode);
+}
+
+static struct drm_connector_helper_funcs adv7511_connector_helper_funcs = {
+	.get_modes = adv7511_connector_get_modes,
+	.mode_valid = adv7511_connector_mode_valid,
+};
+
+static enum drm_connector_status
+adv7511_connector_detect(struct drm_connector *connector, bool force)
+{
+	struct adv7511 *adv = connector_to_adv7511(connector);
+
+	return adv7511_detect(adv, connector);
+}
+
+static const struct drm_connector_funcs adv7511_connector_funcs = {
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.detect = adv7511_connector_detect,
+	.destroy = drm_connector_cleanup,
+	.reset = drm_atomic_helper_connector_reset,
+	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+/* Bridge funcs */
+static struct adv7511 *bridge_to_adv7511(struct drm_bridge *bridge)
+{
+	return container_of(bridge, struct adv7511, bridge);
+}
+
+static void adv7511_bridge_enable(struct drm_bridge *bridge)
+{
+	struct adv7511 *adv = bridge_to_adv7511(bridge);
+
+	adv7511_power_on(adv);
+}
+
+static void adv7511_bridge_disable(struct drm_bridge *bridge)
+{
+	struct adv7511 *adv = bridge_to_adv7511(bridge);
+
+	adv7511_power_off(adv);
+}
+
+static void adv7511_bridge_mode_set(struct drm_bridge *bridge,
+				    struct drm_display_mode *mode,
+				    struct drm_display_mode *adj_mode)
+{
+	struct adv7511 *adv = bridge_to_adv7511(bridge);
+
+	adv7511_mode_set(adv, mode, adj_mode);
+}
+
+static int adv7511_bridge_attach(struct drm_bridge *bridge)
+{
+	struct adv7511 *adv = bridge_to_adv7511(bridge);
+	int ret;
+
+	if (!bridge->encoder) {
+		DRM_ERROR("Parent encoder object not found");
+		return -ENODEV;
+	}
+
+	if (adv->i2c_main->irq)
+		adv->connector.polled = DRM_CONNECTOR_POLL_HPD;
+	else
+		adv->connector.polled = DRM_CONNECTOR_POLL_CONNECT |
+				DRM_CONNECTOR_POLL_DISCONNECT;
+
+	ret = drm_connector_init(bridge->dev, &adv->connector,
+				 &adv7511_connector_funcs,
+				 DRM_MODE_CONNECTOR_HDMIA);
+	if (ret) {
+		DRM_ERROR("Failed to initialize connector with drm\n");
+		return ret;
+	}
+	drm_connector_helper_add(&adv->connector,
+				 &adv7511_connector_helper_funcs);
+	drm_connector_attach_encoder(&adv->connector, bridge->encoder);
+
+	if (adv->type == ADV7533)
+		ret = adv7533_attach_dsi(adv);
+
+	if (adv->i2c_main->irq)
+		regmap_write(adv->regmap, ADV7511_REG_INT_ENABLE(0),
+			     ADV7511_INT0_HPD);
+
+	return ret;
+}
+
+static const struct drm_bridge_funcs adv7511_bridge_funcs = {
+	.enable = adv7511_bridge_enable,
+	.disable = adv7511_bridge_disable,
+	.mode_set = adv7511_bridge_mode_set,
+	.attach = adv7511_bridge_attach,
+};
+
+/* -----------------------------------------------------------------------------
+ * Probe & remove
+ */
+
+static const char * const adv7511_supply_names[] = {
+	"avdd",
+	"dvdd",
+	"pvdd",
+	"bgvdd",
+	"dvdd-3v",
+};
+
+static const char * const adv7533_supply_names[] = {
+	"avdd",
+	"dvdd",
+	"pvdd",
+	"a2vdd",
+	"v3p3",
+	"v1p2",
+};
+
+static int adv7511_init_regulators(struct adv7511 *adv)
+{
+	struct device *dev = &adv->i2c_main->dev;
+	const char * const *supply_names;
+	unsigned int i;
+	int ret;
+
+	if (adv->type == ADV7511) {
+		supply_names = adv7511_supply_names;
+		adv->num_supplies = ARRAY_SIZE(adv7511_supply_names);
+	} else {
+		supply_names = adv7533_supply_names;
+		adv->num_supplies = ARRAY_SIZE(adv7533_supply_names);
+	}
+
+	adv->supplies = devm_kcalloc(dev, adv->num_supplies,
+				     sizeof(*adv->supplies), GFP_KERNEL);
+	if (!adv->supplies)
+		return -ENOMEM;
+
+	for (i = 0; i < adv->num_supplies; i++)
+		adv->supplies[i].supply = supply_names[i];
+
+	ret = devm_regulator_bulk_get(dev, adv->num_supplies, adv->supplies);
+	if (ret)
+		return ret;
+
+	return regulator_bulk_enable(adv->num_supplies, adv->supplies);
+}
+
+static void adv7511_uninit_regulators(struct adv7511 *adv)
+{
+	regulator_bulk_disable(adv->num_supplies, adv->supplies);
+}
+
+static bool adv7511_cec_register_volatile(struct device *dev, unsigned int reg)
+{
+	struct i2c_client *i2c = to_i2c_client(dev);
+	struct adv7511 *adv7511 = i2c_get_clientdata(i2c);
+
+	if (adv7511->type == ADV7533)
+		reg -= ADV7533_REG_CEC_OFFSET;
+
+	switch (reg) {
+	case ADV7511_REG_CEC_RX_FRAME_HDR:
+	case ADV7511_REG_CEC_RX_FRAME_DATA0...
+		ADV7511_REG_CEC_RX_FRAME_DATA0 + 14:
+	case ADV7511_REG_CEC_RX_FRAME_LEN:
+	case ADV7511_REG_CEC_RX_BUFFERS:
+	case ADV7511_REG_CEC_TX_LOW_DRV_CNT:
+		return true;
+	}
+
+	return false;
+}
+
+static const struct regmap_config adv7511_cec_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = 0xff,
+	.cache_type = REGCACHE_RBTREE,
+	.volatile_reg = adv7511_cec_register_volatile,
+};
+
+static int adv7511_init_cec_regmap(struct adv7511 *adv)
+{
+	int ret;
+
+	adv->i2c_cec = i2c_new_secondary_device(adv->i2c_main, "cec",
+						ADV7511_CEC_I2C_ADDR_DEFAULT);
+	if (!adv->i2c_cec)
+		return -EINVAL;
+	i2c_set_clientdata(adv->i2c_cec, adv);
+
+	adv->regmap_cec = devm_regmap_init_i2c(adv->i2c_cec,
+					&adv7511_cec_regmap_config);
+	if (IS_ERR(adv->regmap_cec)) {
+		ret = PTR_ERR(adv->regmap_cec);
+		goto err;
+	}
+
+	if (adv->type == ADV7533) {
+		ret = adv7533_patch_cec_registers(adv);
+		if (ret)
+			goto err;
+	}
+
+	return 0;
+err:
+	i2c_unregister_device(adv->i2c_cec);
+	return ret;
+}
+
+static int adv7511_parse_dt(struct device_node *np,
+			    struct adv7511_link_config *config)
+{
+	const char *str;
+	int ret;
+
+	of_property_read_u32(np, "adi,input-depth", &config->input_color_depth);
+	if (config->input_color_depth != 8 && config->input_color_depth != 10 &&
+	    config->input_color_depth != 12)
+		return -EINVAL;
+
+	ret = of_property_read_string(np, "adi,input-colorspace", &str);
+	if (ret < 0)
+		return ret;
+
+	if (!strcmp(str, "rgb"))
+		config->input_colorspace = HDMI_COLORSPACE_RGB;
+	else if (!strcmp(str, "yuv422"))
+		config->input_colorspace = HDMI_COLORSPACE_YUV422;
+	else if (!strcmp(str, "yuv444"))
+		config->input_colorspace = HDMI_COLORSPACE_YUV444;
+	else
+		return -EINVAL;
+
+	ret = of_property_read_string(np, "adi,input-clock", &str);
+	if (ret < 0)
+		return ret;
+
+	if (!strcmp(str, "1x"))
+		config->input_clock = ADV7511_INPUT_CLOCK_1X;
+	else if (!strcmp(str, "2x"))
+		config->input_clock = ADV7511_INPUT_CLOCK_2X;
+	else if (!strcmp(str, "ddr"))
+		config->input_clock = ADV7511_INPUT_CLOCK_DDR;
+	else
+		return -EINVAL;
+
+	if (config->input_colorspace == HDMI_COLORSPACE_YUV422 ||
+	    config->input_clock != ADV7511_INPUT_CLOCK_1X) {
+		ret = of_property_read_u32(np, "adi,input-style",
+					   &config->input_style);
+		if (ret)
+			return ret;
+
+		if (config->input_style < 1 || config->input_style > 3)
+			return -EINVAL;
+
+		ret = of_property_read_string(np, "adi,input-justification",
+					      &str);
+		if (ret < 0)
+			return ret;
+
+		if (!strcmp(str, "left"))
+			config->input_justification =
+				ADV7511_INPUT_JUSTIFICATION_LEFT;
+		else if (!strcmp(str, "evenly"))
+			config->input_justification =
+				ADV7511_INPUT_JUSTIFICATION_EVENLY;
+		else if (!strcmp(str, "right"))
+			config->input_justification =
+				ADV7511_INPUT_JUSTIFICATION_RIGHT;
+		else
+			return -EINVAL;
+
+	} else {
+		config->input_style = 1;
+		config->input_justification = ADV7511_INPUT_JUSTIFICATION_LEFT;
+	}
+
+	of_property_read_u32(np, "adi,clock-delay", &config->clock_delay);
+	if (config->clock_delay < -1200 || config->clock_delay > 1600)
+		return -EINVAL;
+
+	config->embedded_sync = of_property_read_bool(np, "adi,embedded-sync");
+
+	/* Hardcode the sync pulse configurations for now. */
+	config->sync_pulse = ADV7511_INPUT_SYNC_PULSE_NONE;
+	config->vsync_polarity = ADV7511_SYNC_POLARITY_PASSTHROUGH;
+	config->hsync_polarity = ADV7511_SYNC_POLARITY_PASSTHROUGH;
+
+	return 0;
+}
+
+static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
+{
+	struct adv7511_link_config link_config;
+	struct adv7511 *adv7511;
+	struct device *dev = &i2c->dev;
+	unsigned int val;
+	int ret;
+
+	if (!dev->of_node)
+		return -EINVAL;
+
+	adv7511 = devm_kzalloc(dev, sizeof(*adv7511), GFP_KERNEL);
+	if (!adv7511)
+		return -ENOMEM;
+
+	adv7511->i2c_main = i2c;
+	adv7511->powered = false;
+	adv7511->status = connector_status_disconnected;
+
+	if (dev->of_node)
+		adv7511->type = (enum adv7511_type)of_device_get_match_data(dev);
+	else
+		adv7511->type = id->driver_data;
+
+	memset(&link_config, 0, sizeof(link_config));
+
+	if (adv7511->type == ADV7511)
+		ret = adv7511_parse_dt(dev->of_node, &link_config);
+	else
+		ret = adv7533_parse_dt(dev->of_node, adv7511);
+	if (ret)
+		return ret;
+
+	ret = adv7511_init_regulators(adv7511);
+	if (ret) {
+		dev_err(dev, "failed to init regulators\n");
+		return ret;
+	}
+
+	/*
+	 * The power down GPIO is optional. If present, toggle it from active to
+	 * inactive to wake up the encoder.
+	 */
+	adv7511->gpio_pd = devm_gpiod_get_optional(dev, "pd", GPIOD_OUT_HIGH);
+	if (IS_ERR(adv7511->gpio_pd)) {
+		ret = PTR_ERR(adv7511->gpio_pd);
+		goto uninit_regulators;
+	}
+
+	if (adv7511->gpio_pd) {
+		usleep_range(5000, 6000);
+		gpiod_set_value_cansleep(adv7511->gpio_pd, 0);
+	}
+
+	adv7511->regmap = devm_regmap_init_i2c(i2c, &adv7511_regmap_config);
+	if (IS_ERR(adv7511->regmap)) {
+		ret = PTR_ERR(adv7511->regmap);
+		goto uninit_regulators;
+	}
+
+	ret = regmap_read(adv7511->regmap, ADV7511_REG_CHIP_REVISION, &val);
+	if (ret)
+		goto uninit_regulators;
+	dev_dbg(dev, "Rev. %d\n", val);
+
+	if (adv7511->type == ADV7511)
+		ret = regmap_register_patch(adv7511->regmap,
+					    adv7511_fixed_registers,
+					    ARRAY_SIZE(adv7511_fixed_registers));
+	else
+		ret = adv7533_patch_registers(adv7511);
+	if (ret)
+		goto uninit_regulators;
+
+	adv7511_packet_disable(adv7511, 0xffff);
+
+	adv7511->i2c_edid = i2c_new_secondary_device(i2c, "edid",
+					ADV7511_EDID_I2C_ADDR_DEFAULT);
+	if (!adv7511->i2c_edid) {
+		ret = -EINVAL;
+		goto uninit_regulators;
+	}
+
+	regmap_write(adv7511->regmap, ADV7511_REG_EDID_I2C_ADDR,
+		     adv7511->i2c_edid->addr << 1);
+
+	adv7511->i2c_packet = i2c_new_secondary_device(i2c, "packet",
+					ADV7511_PACKET_I2C_ADDR_DEFAULT);
+	if (!adv7511->i2c_packet) {
+		ret = -EINVAL;
+		goto err_i2c_unregister_edid;
+	}
+
+	regmap_write(adv7511->regmap, ADV7511_REG_PACKET_I2C_ADDR,
+		     adv7511->i2c_packet->addr << 1);
+
+	ret = adv7511_init_cec_regmap(adv7511);
+	if (ret)
+		goto err_i2c_unregister_packet;
+
+	regmap_write(adv7511->regmap, ADV7511_REG_CEC_I2C_ADDR,
+		     adv7511->i2c_cec->addr << 1);
+
+	INIT_WORK(&adv7511->hpd_work, adv7511_hpd_work);
+
+	if (i2c->irq) {
+		init_waitqueue_head(&adv7511->wq);
+
+		ret = devm_request_threaded_irq(dev, i2c->irq, NULL,
+						adv7511_irq_handler,
+						IRQF_ONESHOT, dev_name(dev),
+						adv7511);
+		if (ret)
+			goto err_unregister_cec;
+	}
+
+	adv7511_power_off(adv7511);
+
+	i2c_set_clientdata(i2c, adv7511);
+
+	if (adv7511->type == ADV7511)
+		adv7511_set_link_config(adv7511, &link_config);
+
+	ret = adv7511_cec_init(dev, adv7511);
+	if (ret)
+		goto err_unregister_cec;
+
+	adv7511->bridge.funcs = &adv7511_bridge_funcs;
+	adv7511->bridge.of_node = dev->of_node;
+
+	drm_bridge_add(&adv7511->bridge);
+
+	adv7511_audio_init(dev, adv7511);
+	return 0;
+
+err_unregister_cec:
+	cec_unregister_adapter(adv7511->cec_adap);
+	i2c_unregister_device(adv7511->i2c_cec);
+	if (adv7511->cec_clk)
+		clk_disable_unprepare(adv7511->cec_clk);
+err_i2c_unregister_packet:
+	i2c_unregister_device(adv7511->i2c_packet);
+err_i2c_unregister_edid:
+	i2c_unregister_device(adv7511->i2c_edid);
+uninit_regulators:
+	adv7511_uninit_regulators(adv7511);
+
+	return ret;
+}
+
+static int adv7511_remove(struct i2c_client *i2c)
+{
+	struct adv7511 *adv7511 = i2c_get_clientdata(i2c);
+
+	if (adv7511->type == ADV7533)
+		adv7533_detach_dsi(adv7511);
+	i2c_unregister_device(adv7511->i2c_cec);
+	if (adv7511->cec_clk)
+		clk_disable_unprepare(adv7511->cec_clk);
+
+	adv7511_uninit_regulators(adv7511);
+
+	drm_bridge_remove(&adv7511->bridge);
+
+	adv7511_audio_exit(adv7511);
+
+	cec_unregister_adapter(adv7511->cec_adap);
+
+	i2c_unregister_device(adv7511->i2c_packet);
+	i2c_unregister_device(adv7511->i2c_edid);
+
+	return 0;
+}
+
+static const struct i2c_device_id adv7511_i2c_ids[] = {
+	{ "adv7511", ADV7511 },
+	{ "adv7511w", ADV7511 },
+	{ "adv7513", ADV7511 },
+#ifdef CONFIG_DRM_I2C_ADV7533
+	{ "adv7533", ADV7533 },
+#endif
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, adv7511_i2c_ids);
+
+static const struct of_device_id adv7511_of_ids[] = {
+	{ .compatible = "adi,adv7511", .data = (void *)ADV7511 },
+	{ .compatible = "adi,adv7511w", .data = (void *)ADV7511 },
+	{ .compatible = "adi,adv7513", .data = (void *)ADV7511 },
+#ifdef CONFIG_DRM_I2C_ADV7533
+	{ .compatible = "adi,adv7533", .data = (void *)ADV7533 },
+#endif
+	{ }
+};
+MODULE_DEVICE_TABLE(of, adv7511_of_ids);
+
+static struct mipi_dsi_driver adv7533_dsi_driver = {
+	.driver.name = "adv7533",
+};
+
+static struct i2c_driver adv7511_driver = {
+	.driver = {
+		.name = "adv7511",
+		.of_match_table = adv7511_of_ids,
+	},
+	.id_table = adv7511_i2c_ids,
+	.probe = adv7511_probe,
+	.remove = adv7511_remove,
+};
+
+static int __init adv7511_init(void)
+{
+	if (IS_ENABLED(CONFIG_DRM_MIPI_DSI))
+		mipi_dsi_driver_register(&adv7533_dsi_driver);
+
+	return i2c_add_driver(&adv7511_driver);
+}
+module_init(adv7511_init);
+
+static void __exit adv7511_exit(void)
+{
+	i2c_del_driver(&adv7511_driver);
+
+	if (IS_ENABLED(CONFIG_DRM_MIPI_DSI))
+		mipi_dsi_driver_unregister(&adv7533_dsi_driver);
+}
+module_exit(adv7511_exit);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("ADV7511 HDMI transmitter driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/bridge/adv7511/adv7533.c b/drivers/gpu/drm/bridge/adv7511/adv7533.c
new file mode 100644
index 000000000..185b6d842
--- /dev/null
+++ b/drivers/gpu/drm/bridge/adv7511/adv7533.c
@@ -0,0 +1,223 @@
+/*
+ * Copyright (c) 2016, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/of_graph.h>
+
+#include "adv7511.h"
+
+static const struct reg_sequence adv7533_fixed_registers[] = {
+	{ 0x16, 0x20 },
+	{ 0x9a, 0xe0 },
+	{ 0xba, 0x70 },
+	{ 0xde, 0x82 },
+	{ 0xe4, 0x40 },
+	{ 0xe5, 0x80 },
+};
+
+static const struct reg_sequence adv7533_cec_fixed_registers[] = {
+	{ 0x15, 0xd0 },
+	{ 0x17, 0xd0 },
+	{ 0x24, 0x20 },
+	{ 0x57, 0x11 },
+	{ 0x05, 0xc8 },
+};
+
+static void adv7511_dsi_config_timing_gen(struct adv7511 *adv)
+{
+	struct mipi_dsi_device *dsi = adv->dsi;
+	struct drm_display_mode *mode = &adv->curr_mode;
+	unsigned int hsw, hfp, hbp, vsw, vfp, vbp;
+	u8 clock_div_by_lanes[] = { 6, 4, 3 };	/* 2, 3, 4 lanes */
+
+	hsw = mode->hsync_end - mode->hsync_start;
+	hfp = mode->hsync_start - mode->hdisplay;
+	hbp = mode->htotal - mode->hsync_end;
+	vsw = mode->vsync_end - mode->vsync_start;
+	vfp = mode->vsync_start - mode->vdisplay;
+	vbp = mode->vtotal - mode->vsync_end;
+
+	/* set pixel clock divider mode */
+	regmap_write(adv->regmap_cec, 0x16,
+		     clock_div_by_lanes[dsi->lanes - 2] << 3);
+
+	/* horizontal porch params */
+	regmap_write(adv->regmap_cec, 0x28, mode->htotal >> 4);
+	regmap_write(adv->regmap_cec, 0x29, (mode->htotal << 4) & 0xff);
+	regmap_write(adv->regmap_cec, 0x2a, hsw >> 4);
+	regmap_write(adv->regmap_cec, 0x2b, (hsw << 4) & 0xff);
+	regmap_write(adv->regmap_cec, 0x2c, hfp >> 4);
+	regmap_write(adv->regmap_cec, 0x2d, (hfp << 4) & 0xff);
+	regmap_write(adv->regmap_cec, 0x2e, hbp >> 4);
+	regmap_write(adv->regmap_cec, 0x2f, (hbp << 4) & 0xff);
+
+	/* vertical porch params */
+	regmap_write(adv->regmap_cec, 0x30, mode->vtotal >> 4);
+	regmap_write(adv->regmap_cec, 0x31, (mode->vtotal << 4) & 0xff);
+	regmap_write(adv->regmap_cec, 0x32, vsw >> 4);
+	regmap_write(adv->regmap_cec, 0x33, (vsw << 4) & 0xff);
+	regmap_write(adv->regmap_cec, 0x34, vfp >> 4);
+	regmap_write(adv->regmap_cec, 0x35, (vfp << 4) & 0xff);
+	regmap_write(adv->regmap_cec, 0x36, vbp >> 4);
+	regmap_write(adv->regmap_cec, 0x37, (vbp << 4) & 0xff);
+}
+
+void adv7533_dsi_power_on(struct adv7511 *adv)
+{
+	struct mipi_dsi_device *dsi = adv->dsi;
+
+	if (adv->use_timing_gen)
+		adv7511_dsi_config_timing_gen(adv);
+
+	/* set number of dsi lanes */
+	regmap_write(adv->regmap_cec, 0x1c, dsi->lanes << 4);
+
+	if (adv->use_timing_gen) {
+		/* reset internal timing generator */
+		regmap_write(adv->regmap_cec, 0x27, 0xcb);
+		regmap_write(adv->regmap_cec, 0x27, 0x8b);
+		regmap_write(adv->regmap_cec, 0x27, 0xcb);
+	} else {
+		/* disable internal timing generator */
+		regmap_write(adv->regmap_cec, 0x27, 0x0b);
+	}
+
+	/* enable hdmi */
+	regmap_write(adv->regmap_cec, 0x03, 0x89);
+	/* disable test mode */
+	regmap_write(adv->regmap_cec, 0x55, 0x00);
+
+	regmap_register_patch(adv->regmap_cec, adv7533_cec_fixed_registers,
+			      ARRAY_SIZE(adv7533_cec_fixed_registers));
+}
+
+void adv7533_dsi_power_off(struct adv7511 *adv)
+{
+	/* disable hdmi */
+	regmap_write(adv->regmap_cec, 0x03, 0x0b);
+	/* disable internal timing generator */
+	regmap_write(adv->regmap_cec, 0x27, 0x0b);
+}
+
+void adv7533_mode_set(struct adv7511 *adv, struct drm_display_mode *mode)
+{
+	struct mipi_dsi_device *dsi = adv->dsi;
+	int lanes, ret;
+
+	if (adv->num_dsi_lanes != 4)
+		return;
+
+	if (mode->clock > 80000)
+		lanes = 4;
+	else
+		lanes = 3;
+
+	if (lanes != dsi->lanes) {
+		mipi_dsi_detach(dsi);
+		dsi->lanes = lanes;
+		ret = mipi_dsi_attach(dsi);
+		if (ret)
+			dev_err(&dsi->dev, "failed to change host lanes\n");
+	}
+}
+
+int adv7533_patch_registers(struct adv7511 *adv)
+{
+	return regmap_register_patch(adv->regmap,
+				     adv7533_fixed_registers,
+				     ARRAY_SIZE(adv7533_fixed_registers));
+}
+
+int adv7533_patch_cec_registers(struct adv7511 *adv)
+{
+	return regmap_register_patch(adv->regmap_cec,
+				    adv7533_cec_fixed_registers,
+				    ARRAY_SIZE(adv7533_cec_fixed_registers));
+}
+
+int adv7533_attach_dsi(struct adv7511 *adv)
+{
+	struct device *dev = &adv->i2c_main->dev;
+	struct mipi_dsi_host *host;
+	struct mipi_dsi_device *dsi;
+	int ret = 0;
+	const struct mipi_dsi_device_info info = { .type = "adv7533",
+						   .channel = 0,
+						   .node = NULL,
+						 };
+
+	host = of_find_mipi_dsi_host_by_node(adv->host_node);
+	if (!host) {
+		dev_err(dev, "failed to find dsi host\n");
+		return -EPROBE_DEFER;
+	}
+
+	dsi = mipi_dsi_device_register_full(host, &info);
+	if (IS_ERR(dsi)) {
+		dev_err(dev, "failed to create dsi device\n");
+		ret = PTR_ERR(dsi);
+		goto err_dsi_device;
+	}
+
+	adv->dsi = dsi;
+
+	dsi->lanes = adv->num_dsi_lanes;
+	dsi->format = MIPI_DSI_FMT_RGB888;
+	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
+			  MIPI_DSI_MODE_EOT_PACKET | MIPI_DSI_MODE_VIDEO_HSE;
+
+	ret = mipi_dsi_attach(dsi);
+	if (ret < 0) {
+		dev_err(dev, "failed to attach dsi to host\n");
+		goto err_dsi_attach;
+	}
+
+	return 0;
+
+err_dsi_attach:
+	mipi_dsi_device_unregister(dsi);
+err_dsi_device:
+	return ret;
+}
+
+void adv7533_detach_dsi(struct adv7511 *adv)
+{
+	mipi_dsi_detach(adv->dsi);
+	mipi_dsi_device_unregister(adv->dsi);
+}
+
+int adv7533_parse_dt(struct device_node *np, struct adv7511 *adv)
+{
+	u32 num_lanes;
+
+	of_property_read_u32(np, "adi,dsi-lanes", &num_lanes);
+
+	if (num_lanes < 1 || num_lanes > 4)
+		return -EINVAL;
+
+	adv->num_dsi_lanes = num_lanes;
+
+	adv->host_node = of_graph_get_remote_node(np, 0, 0);
+	if (!adv->host_node)
+		return -ENODEV;
+
+	of_node_put(adv->host_node);
+
+	adv->use_timing_gen = !of_property_read_bool(np,
+						"adi,disable-timing-generator");
+
+	/* TODO: Check if these need to be parsed by DT or not */
+	adv->rgb = true;
+	adv->embedded_sync = false;
+
+	return 0;
+}
diff --git a/drivers/gpu/drm/bridge/analogix-anx78xx.c b/drivers/gpu/drm/bridge/analogix-anx78xx.c
new file mode 100644
index 000000000..cc820e9ae
--- /dev/null
+++ b/drivers/gpu/drm/bridge/analogix-anx78xx.c
@@ -0,0 +1,1498 @@
+/*
+ * Copyright(c) 2016, Analogix Semiconductor.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Based on anx7808 driver obtained from chromeos with copyright:
+ * Copyright(c) 2013, Google Inc.
+ *
+ */
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+#include <linux/gpio/consumer.h>
+#include <linux/regulator/consumer.h>
+
+#include <drm/drmP.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_dp_helper.h>
+#include <drm/drm_edid.h>
+
+#include "analogix-anx78xx.h"
+
+#define I2C_NUM_ADDRESSES	5
+#define I2C_IDX_TX_P0		0
+#define I2C_IDX_TX_P1		1
+#define I2C_IDX_TX_P2		2
+#define I2C_IDX_RX_P0		3
+#define I2C_IDX_RX_P1		4
+
+#define XTAL_CLK		270 /* 27M */
+#define AUX_CH_BUFFER_SIZE	16
+#define AUX_WAIT_TIMEOUT_MS	15
+
+static const u8 anx78xx_i2c_addresses[] = {
+	[I2C_IDX_TX_P0] = TX_P0,
+	[I2C_IDX_TX_P1] = TX_P1,
+	[I2C_IDX_TX_P2] = TX_P2,
+	[I2C_IDX_RX_P0] = RX_P0,
+	[I2C_IDX_RX_P1] = RX_P1,
+};
+
+struct anx78xx_platform_data {
+	struct regulator *dvdd10;
+	struct gpio_desc *gpiod_hpd;
+	struct gpio_desc *gpiod_pd;
+	struct gpio_desc *gpiod_reset;
+
+	int hpd_irq;
+	int intp_irq;
+};
+
+struct anx78xx {
+	struct drm_dp_aux aux;
+	struct drm_bridge bridge;
+	struct i2c_client *client;
+	struct edid *edid;
+	struct drm_connector connector;
+	struct drm_dp_link link;
+	struct anx78xx_platform_data pdata;
+	struct mutex lock;
+
+	/*
+	 * I2C Slave addresses of ANX7814 are mapped as TX_P0, TX_P1, TX_P2,
+	 * RX_P0 and RX_P1.
+	 */
+	struct i2c_client *i2c_dummy[I2C_NUM_ADDRESSES];
+	struct regmap *map[I2C_NUM_ADDRESSES];
+
+	u16 chipid;
+	u8 dpcd[DP_RECEIVER_CAP_SIZE];
+
+	bool powered;
+};
+
+static inline struct anx78xx *connector_to_anx78xx(struct drm_connector *c)
+{
+	return container_of(c, struct anx78xx, connector);
+}
+
+static inline struct anx78xx *bridge_to_anx78xx(struct drm_bridge *bridge)
+{
+	return container_of(bridge, struct anx78xx, bridge);
+}
+
+static int anx78xx_set_bits(struct regmap *map, u8 reg, u8 mask)
+{
+	return regmap_update_bits(map, reg, mask, mask);
+}
+
+static int anx78xx_clear_bits(struct regmap *map, u8 reg, u8 mask)
+{
+	return regmap_update_bits(map, reg, mask, 0);
+}
+
+static bool anx78xx_aux_op_finished(struct anx78xx *anx78xx)
+{
+	unsigned int value;
+	int err;
+
+	err = regmap_read(anx78xx->map[I2C_IDX_TX_P0], SP_DP_AUX_CH_CTRL2_REG,
+			  &value);
+	if (err < 0)
+		return false;
+
+	return (value & SP_AUX_EN) == 0;
+}
+
+static int anx78xx_aux_wait(struct anx78xx *anx78xx)
+{
+	unsigned long timeout;
+	unsigned int status;
+	int err;
+
+	timeout = jiffies + msecs_to_jiffies(AUX_WAIT_TIMEOUT_MS) + 1;
+
+	while (!anx78xx_aux_op_finished(anx78xx)) {
+		if (time_after(jiffies, timeout)) {
+			if (!anx78xx_aux_op_finished(anx78xx)) {
+				DRM_ERROR("Timed out waiting AUX to finish\n");
+				return -ETIMEDOUT;
+			}
+
+			break;
+		}
+
+		usleep_range(1000, 2000);
+	}
+
+	/* Read the AUX channel access status */
+	err = regmap_read(anx78xx->map[I2C_IDX_TX_P0], SP_AUX_CH_STATUS_REG,
+			  &status);
+	if (err < 0) {
+		DRM_ERROR("Failed to read from AUX channel: %d\n", err);
+		return err;
+	}
+
+	if (status & SP_AUX_STATUS) {
+		DRM_ERROR("Failed to wait for AUX channel (status: %02x)\n",
+			  status);
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static int anx78xx_aux_address(struct anx78xx *anx78xx, unsigned int addr)
+{
+	int err;
+
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_AUX_ADDR_7_0_REG,
+			   addr & 0xff);
+	if (err)
+		return err;
+
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_AUX_ADDR_15_8_REG,
+			   (addr & 0xff00) >> 8);
+	if (err)
+		return err;
+
+	/*
+	 * DP AUX CH Address Register #2, only update bits[3:0]
+	 * [7:4] RESERVED
+	 * [3:0] AUX_ADDR[19:16], Register control AUX CH address.
+	 */
+	err = regmap_update_bits(anx78xx->map[I2C_IDX_TX_P0],
+				 SP_AUX_ADDR_19_16_REG,
+				 SP_AUX_ADDR_19_16_MASK,
+				 (addr & 0xf0000) >> 16);
+
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static ssize_t anx78xx_aux_transfer(struct drm_dp_aux *aux,
+				    struct drm_dp_aux_msg *msg)
+{
+	struct anx78xx *anx78xx = container_of(aux, struct anx78xx, aux);
+	u8 ctrl1 = msg->request;
+	u8 ctrl2 = SP_AUX_EN;
+	u8 *buffer = msg->buffer;
+	int err;
+
+	/* The DP AUX transmit and receive buffer has 16 bytes. */
+	if (WARN_ON(msg->size > AUX_CH_BUFFER_SIZE))
+		return -E2BIG;
+
+	/* Zero-sized messages specify address-only transactions. */
+	if (msg->size < 1)
+		ctrl2 |= SP_ADDR_ONLY;
+	else	/* For non-zero-sized set the length field. */
+		ctrl1 |= (msg->size - 1) << SP_AUX_LENGTH_SHIFT;
+
+	if ((msg->request & DP_AUX_I2C_READ) == 0) {
+		/* When WRITE | MOT write values to data buffer */
+		err = regmap_bulk_write(anx78xx->map[I2C_IDX_TX_P0],
+					SP_DP_BUF_DATA0_REG, buffer,
+					msg->size);
+		if (err)
+			return err;
+	}
+
+	/* Write address and request */
+	err = anx78xx_aux_address(anx78xx, msg->address);
+	if (err)
+		return err;
+
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_DP_AUX_CH_CTRL1_REG,
+			   ctrl1);
+	if (err)
+		return err;
+
+	/* Start transaction */
+	err = regmap_update_bits(anx78xx->map[I2C_IDX_TX_P0],
+				 SP_DP_AUX_CH_CTRL2_REG, SP_ADDR_ONLY |
+				 SP_AUX_EN, ctrl2);
+	if (err)
+		return err;
+
+	err = anx78xx_aux_wait(anx78xx);
+	if (err)
+		return err;
+
+	msg->reply = DP_AUX_I2C_REPLY_ACK;
+
+	if ((msg->size > 0) && (msg->request & DP_AUX_I2C_READ)) {
+		/* Read values from data buffer */
+		err = regmap_bulk_read(anx78xx->map[I2C_IDX_TX_P0],
+				       SP_DP_BUF_DATA0_REG, buffer,
+				       msg->size);
+		if (err)
+			return err;
+	}
+
+	err = anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P0],
+				 SP_DP_AUX_CH_CTRL2_REG, SP_ADDR_ONLY);
+	if (err)
+		return err;
+
+	return msg->size;
+}
+
+static int anx78xx_set_hpd(struct anx78xx *anx78xx)
+{
+	int err;
+
+	err = anx78xx_clear_bits(anx78xx->map[I2C_IDX_RX_P0],
+				 SP_TMDS_CTRL_BASE + 7, SP_PD_RT);
+	if (err)
+		return err;
+
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P2], SP_VID_CTRL3_REG,
+			       SP_HPD_OUT);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static int anx78xx_clear_hpd(struct anx78xx *anx78xx)
+{
+	int err;
+
+	err = anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P2], SP_VID_CTRL3_REG,
+				 SP_HPD_OUT);
+	if (err)
+		return err;
+
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_RX_P0],
+			       SP_TMDS_CTRL_BASE + 7, SP_PD_RT);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static const struct reg_sequence tmds_phy_initialization[] = {
+	{ SP_TMDS_CTRL_BASE +  1, 0x90 },
+	{ SP_TMDS_CTRL_BASE +  2, 0xa9 },
+	{ SP_TMDS_CTRL_BASE +  6, 0x92 },
+	{ SP_TMDS_CTRL_BASE +  7, 0x80 },
+	{ SP_TMDS_CTRL_BASE + 20, 0xf2 },
+	{ SP_TMDS_CTRL_BASE + 22, 0xc4 },
+	{ SP_TMDS_CTRL_BASE + 23, 0x18 },
+};
+
+static int anx78xx_rx_initialization(struct anx78xx *anx78xx)
+{
+	int err;
+
+	err = regmap_write(anx78xx->map[I2C_IDX_RX_P0], SP_HDMI_MUTE_CTRL_REG,
+			   SP_AUD_MUTE | SP_VID_MUTE);
+	if (err)
+		return err;
+
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_RX_P0], SP_CHIP_CTRL_REG,
+			       SP_MAN_HDMI5V_DET | SP_PLLLOCK_CKDT_EN |
+			       SP_DIGITAL_CKDT_EN);
+	if (err)
+		return err;
+
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_RX_P0],
+			       SP_SOFTWARE_RESET1_REG, SP_HDCP_MAN_RST |
+			       SP_SW_MAN_RST | SP_TMDS_RST | SP_VIDEO_RST);
+	if (err)
+		return err;
+
+	err = anx78xx_clear_bits(anx78xx->map[I2C_IDX_RX_P0],
+				 SP_SOFTWARE_RESET1_REG, SP_HDCP_MAN_RST |
+				 SP_SW_MAN_RST | SP_TMDS_RST | SP_VIDEO_RST);
+	if (err)
+		return err;
+
+	/* Sync detect change, GP set mute */
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_RX_P0],
+			       SP_AUD_EXCEPTION_ENABLE_BASE + 1, BIT(5) |
+			       BIT(6));
+	if (err)
+		return err;
+
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_RX_P0],
+			       SP_AUD_EXCEPTION_ENABLE_BASE + 3,
+			       SP_AEC_EN21);
+	if (err)
+		return err;
+
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_RX_P0], SP_AUDVID_CTRL_REG,
+			       SP_AVC_EN | SP_AAC_OE | SP_AAC_EN);
+	if (err)
+		return err;
+
+	err = anx78xx_clear_bits(anx78xx->map[I2C_IDX_RX_P0],
+				 SP_SYSTEM_POWER_DOWN1_REG, SP_PWDN_CTRL);
+	if (err)
+		return err;
+
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_RX_P0],
+			       SP_VID_DATA_RANGE_CTRL_REG, SP_R2Y_INPUT_LIMIT);
+	if (err)
+		return err;
+
+	/* Enable DDC stretch */
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P0],
+			   SP_DP_EXTRA_I2C_DEV_ADDR_REG, SP_I2C_EXTRA_ADDR);
+	if (err)
+		return err;
+
+	/* TMDS phy initialization */
+	err = regmap_multi_reg_write(anx78xx->map[I2C_IDX_RX_P0],
+				     tmds_phy_initialization,
+				     ARRAY_SIZE(tmds_phy_initialization));
+	if (err)
+		return err;
+
+	err = anx78xx_clear_hpd(anx78xx);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static const u8 dp_tx_output_precise_tune_bits[20] = {
+	0x01, 0x03, 0x07, 0x7f, 0x71, 0x6b, 0x7f,
+	0x73, 0x7f, 0x7f, 0x00, 0x00, 0x00, 0x00,
+	0x0c, 0x42, 0x1e, 0x3e, 0x72, 0x7e,
+};
+
+static int anx78xx_link_phy_initialization(struct anx78xx *anx78xx)
+{
+	int err;
+
+	/*
+	 * REVISIT : It is writing to a RESERVED bits in Analog Control 0
+	 * register.
+	 */
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P2], SP_ANALOG_CTRL0_REG,
+			   0x02);
+	if (err)
+		return err;
+
+	/*
+	 * Write DP TX output emphasis precise tune bits.
+	 */
+	err = regmap_bulk_write(anx78xx->map[I2C_IDX_TX_P1],
+				SP_DP_TX_LT_CTRL0_REG,
+				dp_tx_output_precise_tune_bits,
+				ARRAY_SIZE(dp_tx_output_precise_tune_bits));
+
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static int anx78xx_xtal_clk_sel(struct anx78xx *anx78xx)
+{
+	unsigned int value;
+	int err;
+
+	err = regmap_update_bits(anx78xx->map[I2C_IDX_TX_P2],
+				 SP_ANALOG_DEBUG2_REG,
+				 SP_XTAL_FRQ | SP_FORCE_SW_OFF_BYPASS,
+				 SP_XTAL_FRQ_27M);
+	if (err)
+		return err;
+
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_DP_AUX_CH_CTRL3_REG,
+			   XTAL_CLK & SP_WAIT_COUNTER_7_0_MASK);
+	if (err)
+		return err;
+
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_DP_AUX_CH_CTRL4_REG,
+			   ((XTAL_CLK & 0xff00) >> 2) | (XTAL_CLK / 10));
+	if (err)
+		return err;
+
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P0],
+			   SP_I2C_GEN_10US_TIMER0_REG, XTAL_CLK & 0xff);
+	if (err)
+		return err;
+
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P0],
+			   SP_I2C_GEN_10US_TIMER1_REG,
+			   (XTAL_CLK & 0xff00) >> 8);
+	if (err)
+		return err;
+
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_AUX_MISC_CTRL_REG,
+			   XTAL_CLK / 10 - 1);
+	if (err)
+		return err;
+
+	err = regmap_read(anx78xx->map[I2C_IDX_RX_P0],
+			  SP_HDMI_US_TIMER_CTRL_REG,
+			  &value);
+	if (err)
+		return err;
+
+	err = regmap_write(anx78xx->map[I2C_IDX_RX_P0],
+			   SP_HDMI_US_TIMER_CTRL_REG,
+			   (value & SP_MS_TIMER_MARGIN_10_8_MASK) |
+			   ((((XTAL_CLK / 10) >> 1) - 2) << 3));
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static const struct reg_sequence otp_key_protect[] = {
+	{ SP_OTP_KEY_PROTECT1_REG, SP_OTP_PSW1 },
+	{ SP_OTP_KEY_PROTECT2_REG, SP_OTP_PSW2 },
+	{ SP_OTP_KEY_PROTECT3_REG, SP_OTP_PSW3 },
+};
+
+static int anx78xx_tx_initialization(struct anx78xx *anx78xx)
+{
+	int err;
+
+	/* Set terminal resistor to 50 ohm */
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_DP_AUX_CH_CTRL2_REG,
+			   0x30);
+	if (err)
+		return err;
+
+	/* Enable aux double diff output */
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
+			       SP_DP_AUX_CH_CTRL2_REG, 0x08);
+	if (err)
+		return err;
+
+	err = anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P0],
+				 SP_DP_HDCP_CTRL_REG, SP_AUTO_EN |
+				 SP_AUTO_START);
+	if (err)
+		return err;
+
+	err = regmap_multi_reg_write(anx78xx->map[I2C_IDX_TX_P0],
+				     otp_key_protect,
+				     ARRAY_SIZE(otp_key_protect));
+	if (err)
+		return err;
+
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
+			       SP_HDCP_KEY_COMMAND_REG, SP_DISABLE_SYNC_HDCP);
+	if (err)
+		return err;
+
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P2], SP_VID_CTRL8_REG,
+			   SP_VID_VRES_TH);
+	if (err)
+		return err;
+
+	/*
+	 * DP HDCP auto authentication wait timer (when downstream starts to
+	 * auth, DP side will wait for this period then do auth automatically)
+	 */
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_HDCP_AUTO_TIMER_REG,
+			   0x00);
+	if (err)
+		return err;
+
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
+			       SP_DP_HDCP_CTRL_REG, SP_LINK_POLLING);
+	if (err)
+		return err;
+
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
+			       SP_DP_LINK_DEBUG_CTRL_REG, SP_M_VID_DEBUG);
+	if (err)
+		return err;
+
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P2],
+			       SP_ANALOG_DEBUG2_REG, SP_POWERON_TIME_1P5MS);
+	if (err)
+		return err;
+
+	err = anx78xx_xtal_clk_sel(anx78xx);
+	if (err)
+		return err;
+
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_AUX_DEFER_CTRL_REG,
+			   SP_DEFER_CTRL_EN | 0x0c);
+	if (err)
+		return err;
+
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
+			       SP_DP_POLLING_CTRL_REG,
+			       SP_AUTO_POLLING_DISABLE);
+	if (err)
+		return err;
+
+	/*
+	 * Short the link integrity check timer to speed up bstatus
+	 * polling for HDCP CTS item 1A-07
+	 */
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P0],
+			   SP_HDCP_LINK_CHECK_TIMER_REG, 0x1d);
+	if (err)
+		return err;
+
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
+			       SP_DP_MISC_CTRL_REG, SP_EQ_TRAINING_LOOP);
+	if (err)
+		return err;
+
+	/* Power down the main link by default */
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
+			       SP_DP_ANALOG_POWER_DOWN_REG, SP_CH0_PD);
+	if (err)
+		return err;
+
+	err = anx78xx_link_phy_initialization(anx78xx);
+	if (err)
+		return err;
+
+	/* Gen m_clk with downspreading */
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
+			       SP_DP_M_CALCULATION_CTRL_REG, SP_M_GEN_CLK_SEL);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static int anx78xx_enable_interrupts(struct anx78xx *anx78xx)
+{
+	int err;
+
+	/*
+	 * BIT0: INT pin assertion polarity: 1 = assert high
+	 * BIT1: INT pin output type: 0 = push/pull
+	 */
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P2], SP_INT_CTRL_REG, 0x01);
+	if (err)
+		return err;
+
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P2],
+			   SP_COMMON_INT_MASK4_REG, SP_HPD_LOST | SP_HPD_PLUG);
+	if (err)
+		return err;
+
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P2], SP_DP_INT_MASK1_REG,
+			   SP_TRAINING_FINISH);
+	if (err)
+		return err;
+
+	err = regmap_write(anx78xx->map[I2C_IDX_RX_P0], SP_INT_MASK1_REG,
+			   SP_CKDT_CHG | SP_SCDT_CHG);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static void anx78xx_poweron(struct anx78xx *anx78xx)
+{
+	struct anx78xx_platform_data *pdata = &anx78xx->pdata;
+	int err;
+
+	if (WARN_ON(anx78xx->powered))
+		return;
+
+	if (pdata->dvdd10) {
+		err = regulator_enable(pdata->dvdd10);
+		if (err) {
+			DRM_ERROR("Failed to enable DVDD10 regulator: %d\n",
+				  err);
+			return;
+		}
+
+		usleep_range(1000, 2000);
+	}
+
+	gpiod_set_value_cansleep(pdata->gpiod_reset, 1);
+	usleep_range(1000, 2000);
+
+	gpiod_set_value_cansleep(pdata->gpiod_pd, 0);
+	usleep_range(1000, 2000);
+
+	gpiod_set_value_cansleep(pdata->gpiod_reset, 0);
+
+	/* Power on registers module */
+	anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P2], SP_POWERDOWN_CTRL_REG,
+			 SP_HDCP_PD | SP_AUDIO_PD | SP_VIDEO_PD | SP_LINK_PD);
+	anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P2], SP_POWERDOWN_CTRL_REG,
+			   SP_REGISTER_PD | SP_TOTAL_PD);
+
+	anx78xx->powered = true;
+}
+
+static void anx78xx_poweroff(struct anx78xx *anx78xx)
+{
+	struct anx78xx_platform_data *pdata = &anx78xx->pdata;
+	int err;
+
+	if (WARN_ON(!anx78xx->powered))
+		return;
+
+	gpiod_set_value_cansleep(pdata->gpiod_reset, 1);
+	usleep_range(1000, 2000);
+
+	gpiod_set_value_cansleep(pdata->gpiod_pd, 1);
+	usleep_range(1000, 2000);
+
+	if (pdata->dvdd10) {
+		err = regulator_disable(pdata->dvdd10);
+		if (err) {
+			DRM_ERROR("Failed to disable DVDD10 regulator: %d\n",
+				  err);
+			return;
+		}
+
+		usleep_range(1000, 2000);
+	}
+
+	anx78xx->powered = false;
+}
+
+static int anx78xx_start(struct anx78xx *anx78xx)
+{
+	int err;
+
+	/* Power on all modules */
+	err = anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P2],
+				 SP_POWERDOWN_CTRL_REG,
+				 SP_HDCP_PD | SP_AUDIO_PD | SP_VIDEO_PD |
+				 SP_LINK_PD);
+
+	err = anx78xx_enable_interrupts(anx78xx);
+	if (err) {
+		DRM_ERROR("Failed to enable interrupts: %d\n", err);
+		goto err_poweroff;
+	}
+
+	err = anx78xx_rx_initialization(anx78xx);
+	if (err) {
+		DRM_ERROR("Failed receiver initialization: %d\n", err);
+		goto err_poweroff;
+	}
+
+	err = anx78xx_tx_initialization(anx78xx);
+	if (err) {
+		DRM_ERROR("Failed transmitter initialization: %d\n", err);
+		goto err_poweroff;
+	}
+
+	/*
+	 * This delay seems to help keep the hardware in a good state. Without
+	 * it, there are times where it fails silently.
+	 */
+	usleep_range(10000, 15000);
+
+	return 0;
+
+err_poweroff:
+	DRM_ERROR("Failed SlimPort transmitter initialization: %d\n", err);
+	anx78xx_poweroff(anx78xx);
+
+	return err;
+}
+
+static int anx78xx_init_pdata(struct anx78xx *anx78xx)
+{
+	struct anx78xx_platform_data *pdata = &anx78xx->pdata;
+	struct device *dev = &anx78xx->client->dev;
+
+	/* 1.0V digital core power regulator  */
+	pdata->dvdd10 = devm_regulator_get(dev, "dvdd10");
+	if (IS_ERR(pdata->dvdd10)) {
+		if (PTR_ERR(pdata->dvdd10) != -EPROBE_DEFER)
+			DRM_ERROR("DVDD10 regulator not found\n");
+
+		return PTR_ERR(pdata->dvdd10);
+	}
+
+	/* GPIO for HPD */
+	pdata->gpiod_hpd = devm_gpiod_get(dev, "hpd", GPIOD_IN);
+	if (IS_ERR(pdata->gpiod_hpd))
+		return PTR_ERR(pdata->gpiod_hpd);
+
+	/* GPIO for chip power down */
+	pdata->gpiod_pd = devm_gpiod_get(dev, "pd", GPIOD_OUT_HIGH);
+	if (IS_ERR(pdata->gpiod_pd))
+		return PTR_ERR(pdata->gpiod_pd);
+
+	/* GPIO for chip reset */
+	pdata->gpiod_reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+
+	return PTR_ERR_OR_ZERO(pdata->gpiod_reset);
+}
+
+static int anx78xx_dp_link_training(struct anx78xx *anx78xx)
+{
+	u8 dp_bw, value;
+	int err;
+
+	err = regmap_write(anx78xx->map[I2C_IDX_RX_P0], SP_HDMI_MUTE_CTRL_REG,
+			   0x0);
+	if (err)
+		return err;
+
+	err = anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P2],
+				 SP_POWERDOWN_CTRL_REG,
+				 SP_TOTAL_PD);
+	if (err)
+		return err;
+
+	err = drm_dp_dpcd_readb(&anx78xx->aux, DP_MAX_LINK_RATE, &dp_bw);
+	if (err < 0)
+		return err;
+
+	switch (dp_bw) {
+	case DP_LINK_BW_1_62:
+	case DP_LINK_BW_2_7:
+	case DP_LINK_BW_5_4:
+		break;
+
+	default:
+		DRM_DEBUG_KMS("DP bandwidth (%#02x) not supported\n", dp_bw);
+		return -EINVAL;
+	}
+
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P2], SP_VID_CTRL1_REG,
+			       SP_VIDEO_MUTE);
+	if (err)
+		return err;
+
+	err = anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P2],
+				 SP_VID_CTRL1_REG, SP_VIDEO_EN);
+	if (err)
+		return err;
+
+	/* Get DPCD info */
+	err = drm_dp_dpcd_read(&anx78xx->aux, DP_DPCD_REV,
+			       &anx78xx->dpcd, DP_RECEIVER_CAP_SIZE);
+	if (err < 0) {
+		DRM_ERROR("Failed to read DPCD: %d\n", err);
+		return err;
+	}
+
+	/* Clear channel x SERDES power down */
+	err = anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P0],
+				 SP_DP_ANALOG_POWER_DOWN_REG, SP_CH0_PD);
+	if (err)
+		return err;
+
+	/* Check link capabilities */
+	err = drm_dp_link_probe(&anx78xx->aux, &anx78xx->link);
+	if (err < 0) {
+		DRM_ERROR("Failed to probe link capabilities: %d\n", err);
+		return err;
+	}
+
+	/* Power up the sink */
+	err = drm_dp_link_power_up(&anx78xx->aux, &anx78xx->link);
+	if (err < 0) {
+		DRM_ERROR("Failed to power up DisplayPort link: %d\n", err);
+		return err;
+	}
+
+	/* Possibly enable downspread on the sink */
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P0],
+			   SP_DP_DOWNSPREAD_CTRL1_REG, 0);
+	if (err)
+		return err;
+
+	if (anx78xx->dpcd[DP_MAX_DOWNSPREAD] & DP_MAX_DOWNSPREAD_0_5) {
+		DRM_DEBUG("Enable downspread on the sink\n");
+		/* 4000PPM */
+		err = regmap_write(anx78xx->map[I2C_IDX_TX_P0],
+				   SP_DP_DOWNSPREAD_CTRL1_REG, 8);
+		if (err)
+			return err;
+
+		err = drm_dp_dpcd_writeb(&anx78xx->aux, DP_DOWNSPREAD_CTRL,
+					 DP_SPREAD_AMP_0_5);
+		if (err < 0)
+			return err;
+	} else {
+		err = drm_dp_dpcd_writeb(&anx78xx->aux, DP_DOWNSPREAD_CTRL, 0);
+		if (err < 0)
+			return err;
+	}
+
+	/* Set the lane count and the link rate on the sink */
+	if (drm_dp_enhanced_frame_cap(anx78xx->dpcd))
+		err = anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
+				       SP_DP_SYSTEM_CTRL_BASE + 4,
+				       SP_ENHANCED_MODE);
+	else
+		err = anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P0],
+					 SP_DP_SYSTEM_CTRL_BASE + 4,
+					 SP_ENHANCED_MODE);
+	if (err)
+		return err;
+
+	value = drm_dp_link_rate_to_bw_code(anx78xx->link.rate);
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P0],
+			   SP_DP_MAIN_LINK_BW_SET_REG, value);
+	if (err)
+		return err;
+
+	err = drm_dp_link_configure(&anx78xx->aux, &anx78xx->link);
+	if (err < 0) {
+		DRM_ERROR("Failed to configure DisplayPort link: %d\n", err);
+		return err;
+	}
+
+	/* Start training on the source */
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_DP_LT_CTRL_REG,
+			   SP_LT_EN);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static int anx78xx_config_dp_output(struct anx78xx *anx78xx)
+{
+	int err;
+
+	err = anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P2], SP_VID_CTRL1_REG,
+				 SP_VIDEO_MUTE);
+	if (err)
+		return err;
+
+	/* Enable DP output */
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P2], SP_VID_CTRL1_REG,
+			       SP_VIDEO_EN);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static int anx78xx_send_video_infoframe(struct anx78xx *anx78xx,
+					struct hdmi_avi_infoframe *frame)
+{
+	u8 buffer[HDMI_INFOFRAME_HEADER_SIZE + HDMI_AVI_INFOFRAME_SIZE];
+	int err;
+
+	err = hdmi_avi_infoframe_pack(frame, buffer, sizeof(buffer));
+	if (err < 0) {
+		DRM_ERROR("Failed to pack AVI infoframe: %d\n", err);
+		return err;
+	}
+
+	err = anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P0],
+				 SP_PACKET_SEND_CTRL_REG, SP_AVI_IF_EN);
+	if (err)
+		return err;
+
+	err = regmap_bulk_write(anx78xx->map[I2C_IDX_TX_P2],
+				SP_INFOFRAME_AVI_DB1_REG, buffer,
+				frame->length);
+	if (err)
+		return err;
+
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
+			       SP_PACKET_SEND_CTRL_REG, SP_AVI_IF_UD);
+	if (err)
+		return err;
+
+	err = anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
+			       SP_PACKET_SEND_CTRL_REG, SP_AVI_IF_EN);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static int anx78xx_get_downstream_info(struct anx78xx *anx78xx)
+{
+	u8 value;
+	int err;
+
+	err = drm_dp_dpcd_readb(&anx78xx->aux, DP_SINK_COUNT, &value);
+	if (err < 0) {
+		DRM_ERROR("Get sink count failed %d\n", err);
+		return err;
+	}
+
+	if (!DP_GET_SINK_COUNT(value)) {
+		DRM_ERROR("Downstream disconnected\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int anx78xx_get_modes(struct drm_connector *connector)
+{
+	struct anx78xx *anx78xx = connector_to_anx78xx(connector);
+	int err, num_modes = 0;
+
+	if (WARN_ON(!anx78xx->powered))
+		return 0;
+
+	if (anx78xx->edid)
+		return drm_add_edid_modes(connector, anx78xx->edid);
+
+	mutex_lock(&anx78xx->lock);
+
+	err = anx78xx_get_downstream_info(anx78xx);
+	if (err) {
+		DRM_ERROR("Failed to get downstream info: %d\n", err);
+		goto unlock;
+	}
+
+	anx78xx->edid = drm_get_edid(connector, &anx78xx->aux.ddc);
+	if (!anx78xx->edid) {
+		DRM_ERROR("Failed to read EDID\n");
+		goto unlock;
+	}
+
+	err = drm_connector_update_edid_property(connector,
+						 anx78xx->edid);
+	if (err) {
+		DRM_ERROR("Failed to update EDID property: %d\n", err);
+		goto unlock;
+	}
+
+	num_modes = drm_add_edid_modes(connector, anx78xx->edid);
+
+unlock:
+	mutex_unlock(&anx78xx->lock);
+
+	return num_modes;
+}
+
+static const struct drm_connector_helper_funcs anx78xx_connector_helper_funcs = {
+	.get_modes = anx78xx_get_modes,
+};
+
+static enum drm_connector_status anx78xx_detect(struct drm_connector *connector,
+						bool force)
+{
+	struct anx78xx *anx78xx = connector_to_anx78xx(connector);
+
+	if (!gpiod_get_value(anx78xx->pdata.gpiod_hpd))
+		return connector_status_disconnected;
+
+	return connector_status_connected;
+}
+
+static const struct drm_connector_funcs anx78xx_connector_funcs = {
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.detect = anx78xx_detect,
+	.destroy = drm_connector_cleanup,
+	.reset = drm_atomic_helper_connector_reset,
+	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static int anx78xx_bridge_attach(struct drm_bridge *bridge)
+{
+	struct anx78xx *anx78xx = bridge_to_anx78xx(bridge);
+	int err;
+
+	if (!bridge->encoder) {
+		DRM_ERROR("Parent encoder object not found");
+		return -ENODEV;
+	}
+
+	/* Register aux channel */
+	anx78xx->aux.name = "DP-AUX";
+	anx78xx->aux.dev = &anx78xx->client->dev;
+	anx78xx->aux.transfer = anx78xx_aux_transfer;
+
+	err = drm_dp_aux_register(&anx78xx->aux);
+	if (err < 0) {
+		DRM_ERROR("Failed to register aux channel: %d\n", err);
+		return err;
+	}
+
+	err = drm_connector_init(bridge->dev, &anx78xx->connector,
+				 &anx78xx_connector_funcs,
+				 DRM_MODE_CONNECTOR_DisplayPort);
+	if (err) {
+		DRM_ERROR("Failed to initialize connector: %d\n", err);
+		return err;
+	}
+
+	drm_connector_helper_add(&anx78xx->connector,
+				 &anx78xx_connector_helper_funcs);
+
+	err = drm_connector_register(&anx78xx->connector);
+	if (err) {
+		DRM_ERROR("Failed to register connector: %d\n", err);
+		return err;
+	}
+
+	anx78xx->connector.polled = DRM_CONNECTOR_POLL_HPD;
+
+	err = drm_connector_attach_encoder(&anx78xx->connector,
+					   bridge->encoder);
+	if (err) {
+		DRM_ERROR("Failed to link up connector to encoder: %d\n", err);
+		return err;
+	}
+
+	return 0;
+}
+
+static enum drm_mode_status
+anx78xx_bridge_mode_valid(struct drm_bridge *bridge,
+			  const struct drm_display_mode *mode)
+{
+	if (mode->flags & DRM_MODE_FLAG_INTERLACE)
+		return MODE_NO_INTERLACE;
+
+	/* Max 1200p at 5.4 Ghz, one lane */
+	if (mode->clock > 154000)
+		return MODE_CLOCK_HIGH;
+
+	return MODE_OK;
+}
+
+static void anx78xx_bridge_disable(struct drm_bridge *bridge)
+{
+	struct anx78xx *anx78xx = bridge_to_anx78xx(bridge);
+
+	/* Power off all modules except configuration registers access */
+	anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P2], SP_POWERDOWN_CTRL_REG,
+			 SP_HDCP_PD | SP_AUDIO_PD | SP_VIDEO_PD | SP_LINK_PD);
+}
+
+static void anx78xx_bridge_mode_set(struct drm_bridge *bridge,
+				    struct drm_display_mode *mode,
+				    struct drm_display_mode *adjusted_mode)
+{
+	struct anx78xx *anx78xx = bridge_to_anx78xx(bridge);
+	struct hdmi_avi_infoframe frame;
+	int err;
+
+	if (WARN_ON(!anx78xx->powered))
+		return;
+
+	mutex_lock(&anx78xx->lock);
+
+	err = drm_hdmi_avi_infoframe_from_display_mode(&frame, adjusted_mode,
+						       false);
+	if (err) {
+		DRM_ERROR("Failed to setup AVI infoframe: %d\n", err);
+		goto unlock;
+	}
+
+	err = anx78xx_send_video_infoframe(anx78xx, &frame);
+	if (err)
+		DRM_ERROR("Failed to send AVI infoframe: %d\n", err);
+
+unlock:
+	mutex_unlock(&anx78xx->lock);
+}
+
+static void anx78xx_bridge_enable(struct drm_bridge *bridge)
+{
+	struct anx78xx *anx78xx = bridge_to_anx78xx(bridge);
+	int err;
+
+	err = anx78xx_start(anx78xx);
+	if (err) {
+		DRM_ERROR("Failed to initialize: %d\n", err);
+		return;
+	}
+
+	err = anx78xx_set_hpd(anx78xx);
+	if (err)
+		DRM_ERROR("Failed to set HPD: %d\n", err);
+}
+
+static const struct drm_bridge_funcs anx78xx_bridge_funcs = {
+	.attach = anx78xx_bridge_attach,
+	.mode_valid = anx78xx_bridge_mode_valid,
+	.disable = anx78xx_bridge_disable,
+	.mode_set = anx78xx_bridge_mode_set,
+	.enable = anx78xx_bridge_enable,
+};
+
+static irqreturn_t anx78xx_hpd_threaded_handler(int irq, void *data)
+{
+	struct anx78xx *anx78xx = data;
+	int err;
+
+	if (anx78xx->powered)
+		return IRQ_HANDLED;
+
+	mutex_lock(&anx78xx->lock);
+
+	/* Cable is pulled, power on the chip */
+	anx78xx_poweron(anx78xx);
+
+	err = anx78xx_enable_interrupts(anx78xx);
+	if (err)
+		DRM_ERROR("Failed to enable interrupts: %d\n", err);
+
+	mutex_unlock(&anx78xx->lock);
+
+	return IRQ_HANDLED;
+}
+
+static int anx78xx_handle_dp_int_1(struct anx78xx *anx78xx, u8 irq)
+{
+	int err;
+
+	DRM_DEBUG_KMS("Handle DP interrupt 1: %02x\n", irq);
+
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P2], SP_DP_INT_STATUS1_REG,
+			   irq);
+	if (err)
+		return err;
+
+	if (irq & SP_TRAINING_FINISH) {
+		DRM_DEBUG_KMS("IRQ: hardware link training finished\n");
+		err = anx78xx_config_dp_output(anx78xx);
+	}
+
+	return err;
+}
+
+static bool anx78xx_handle_common_int_4(struct anx78xx *anx78xx, u8 irq)
+{
+	bool event = false;
+	int err;
+
+	DRM_DEBUG_KMS("Handle common interrupt 4: %02x\n", irq);
+
+	err = regmap_write(anx78xx->map[I2C_IDX_TX_P2],
+			   SP_COMMON_INT_STATUS4_REG, irq);
+	if (err) {
+		DRM_ERROR("Failed to write SP_COMMON_INT_STATUS4 %d\n", err);
+		return event;
+	}
+
+	if (irq & SP_HPD_LOST) {
+		DRM_DEBUG_KMS("IRQ: Hot plug detect - cable is pulled out\n");
+		event = true;
+		anx78xx_poweroff(anx78xx);
+		/* Free cached EDID */
+		kfree(anx78xx->edid);
+		anx78xx->edid = NULL;
+	} else if (irq & SP_HPD_PLUG) {
+		DRM_DEBUG_KMS("IRQ: Hot plug detect - cable plug\n");
+		event = true;
+	}
+
+	return event;
+}
+
+static void anx78xx_handle_hdmi_int_1(struct anx78xx *anx78xx, u8 irq)
+{
+	unsigned int value;
+	int err;
+
+	DRM_DEBUG_KMS("Handle HDMI interrupt 1: %02x\n", irq);
+
+	err = regmap_write(anx78xx->map[I2C_IDX_RX_P0], SP_INT_STATUS1_REG,
+			   irq);
+	if (err) {
+		DRM_ERROR("Write HDMI int 1 failed: %d\n", err);
+		return;
+	}
+
+	if ((irq & SP_CKDT_CHG) || (irq & SP_SCDT_CHG)) {
+		DRM_DEBUG_KMS("IRQ: HDMI input detected\n");
+
+		err = regmap_read(anx78xx->map[I2C_IDX_RX_P0],
+				  SP_SYSTEM_STATUS_REG, &value);
+		if (err) {
+			DRM_ERROR("Read system status reg failed: %d\n", err);
+			return;
+		}
+
+		if (!(value & SP_TMDS_CLOCK_DET)) {
+			DRM_DEBUG_KMS("IRQ: *** Waiting for HDMI clock ***\n");
+			return;
+		}
+
+		if (!(value & SP_TMDS_DE_DET)) {
+			DRM_DEBUG_KMS("IRQ: *** Waiting for HDMI signal ***\n");
+			return;
+		}
+
+		err = anx78xx_dp_link_training(anx78xx);
+		if (err)
+			DRM_ERROR("Failed to start link training: %d\n", err);
+	}
+}
+
+static irqreturn_t anx78xx_intp_threaded_handler(int unused, void *data)
+{
+	struct anx78xx *anx78xx = data;
+	bool event = false;
+	unsigned int irq;
+	int err;
+
+	mutex_lock(&anx78xx->lock);
+
+	err = regmap_read(anx78xx->map[I2C_IDX_TX_P2], SP_DP_INT_STATUS1_REG,
+			  &irq);
+	if (err) {
+		DRM_ERROR("Failed to read DP interrupt 1 status: %d\n", err);
+		goto unlock;
+	}
+
+	if (irq)
+		anx78xx_handle_dp_int_1(anx78xx, irq);
+
+	err = regmap_read(anx78xx->map[I2C_IDX_TX_P2],
+			  SP_COMMON_INT_STATUS4_REG, &irq);
+	if (err) {
+		DRM_ERROR("Failed to read common interrupt 4 status: %d\n",
+			  err);
+		goto unlock;
+	}
+
+	if (irq)
+		event = anx78xx_handle_common_int_4(anx78xx, irq);
+
+	/* Make sure we are still powered after handle HPD events */
+	if (!anx78xx->powered)
+		goto unlock;
+
+	err = regmap_read(anx78xx->map[I2C_IDX_RX_P0], SP_INT_STATUS1_REG,
+			  &irq);
+	if (err) {
+		DRM_ERROR("Failed to read HDMI int 1 status: %d\n", err);
+		goto unlock;
+	}
+
+	if (irq)
+		anx78xx_handle_hdmi_int_1(anx78xx, irq);
+
+unlock:
+	mutex_unlock(&anx78xx->lock);
+
+	if (event)
+		drm_helper_hpd_irq_event(anx78xx->connector.dev);
+
+	return IRQ_HANDLED;
+}
+
+static void unregister_i2c_dummy_clients(struct anx78xx *anx78xx)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(anx78xx->i2c_dummy); i++)
+		i2c_unregister_device(anx78xx->i2c_dummy[i]);
+}
+
+static const struct regmap_config anx78xx_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static const u16 anx78xx_chipid_list[] = {
+	0x7812,
+	0x7814,
+	0x7818,
+};
+
+static int anx78xx_i2c_probe(struct i2c_client *client,
+			     const struct i2c_device_id *id)
+{
+	struct anx78xx *anx78xx;
+	struct anx78xx_platform_data *pdata;
+	unsigned int i, idl, idh, version;
+	bool found = false;
+	int err;
+
+	anx78xx = devm_kzalloc(&client->dev, sizeof(*anx78xx), GFP_KERNEL);
+	if (!anx78xx)
+		return -ENOMEM;
+
+	pdata = &anx78xx->pdata;
+
+	mutex_init(&anx78xx->lock);
+
+#if IS_ENABLED(CONFIG_OF)
+	anx78xx->bridge.of_node = client->dev.of_node;
+#endif
+
+	anx78xx->client = client;
+	i2c_set_clientdata(client, anx78xx);
+
+	err = anx78xx_init_pdata(anx78xx);
+	if (err) {
+		if (err != -EPROBE_DEFER)
+			DRM_ERROR("Failed to initialize pdata: %d\n", err);
+
+		return err;
+	}
+
+	pdata->hpd_irq = gpiod_to_irq(pdata->gpiod_hpd);
+	if (pdata->hpd_irq < 0) {
+		DRM_ERROR("Failed to get HPD IRQ: %d\n", pdata->hpd_irq);
+		return -ENODEV;
+	}
+
+	pdata->intp_irq = client->irq;
+	if (!pdata->intp_irq) {
+		DRM_ERROR("Failed to get CABLE_DET and INTP IRQ\n");
+		return -ENODEV;
+	}
+
+	/* Map slave addresses of ANX7814 */
+	for (i = 0; i < I2C_NUM_ADDRESSES; i++) {
+		anx78xx->i2c_dummy[i] = i2c_new_dummy(client->adapter,
+						anx78xx_i2c_addresses[i] >> 1);
+		if (!anx78xx->i2c_dummy[i]) {
+			err = -ENOMEM;
+			DRM_ERROR("Failed to reserve I2C bus %02x\n",
+				  anx78xx_i2c_addresses[i]);
+			goto err_unregister_i2c;
+		}
+
+		anx78xx->map[i] = devm_regmap_init_i2c(anx78xx->i2c_dummy[i],
+						       &anx78xx_regmap_config);
+		if (IS_ERR(anx78xx->map[i])) {
+			err = PTR_ERR(anx78xx->map[i]);
+			DRM_ERROR("Failed regmap initialization %02x\n",
+				  anx78xx_i2c_addresses[i]);
+			goto err_unregister_i2c;
+		}
+	}
+
+	/* Look for supported chip ID */
+	anx78xx_poweron(anx78xx);
+
+	err = regmap_read(anx78xx->map[I2C_IDX_TX_P2], SP_DEVICE_IDL_REG,
+			  &idl);
+	if (err)
+		goto err_poweroff;
+
+	err = regmap_read(anx78xx->map[I2C_IDX_TX_P2], SP_DEVICE_IDH_REG,
+			  &idh);
+	if (err)
+		goto err_poweroff;
+
+	anx78xx->chipid = (u8)idl | ((u8)idh << 8);
+
+	err = regmap_read(anx78xx->map[I2C_IDX_TX_P2], SP_DEVICE_VERSION_REG,
+			  &version);
+	if (err)
+		goto err_poweroff;
+
+	for (i = 0; i < ARRAY_SIZE(anx78xx_chipid_list); i++) {
+		if (anx78xx->chipid == anx78xx_chipid_list[i]) {
+			DRM_INFO("Found ANX%x (ver. %d) SlimPort Transmitter\n",
+				 anx78xx->chipid, version);
+			found = true;
+			break;
+		}
+	}
+
+	if (!found) {
+		DRM_ERROR("ANX%x (ver. %d) not supported by this driver\n",
+			  anx78xx->chipid, version);
+		err = -ENODEV;
+		goto err_poweroff;
+	}
+
+	err = devm_request_threaded_irq(&client->dev, pdata->hpd_irq, NULL,
+					anx78xx_hpd_threaded_handler,
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					"anx78xx-hpd", anx78xx);
+	if (err) {
+		DRM_ERROR("Failed to request CABLE_DET threaded IRQ: %d\n",
+			  err);
+		goto err_poweroff;
+	}
+
+	err = devm_request_threaded_irq(&client->dev, pdata->intp_irq, NULL,
+					anx78xx_intp_threaded_handler,
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					"anx78xx-intp", anx78xx);
+	if (err) {
+		DRM_ERROR("Failed to request INTP threaded IRQ: %d\n", err);
+		goto err_poweroff;
+	}
+
+	anx78xx->bridge.funcs = &anx78xx_bridge_funcs;
+
+	drm_bridge_add(&anx78xx->bridge);
+
+	/* If cable is pulled out, just poweroff and wait for HPD event */
+	if (!gpiod_get_value(anx78xx->pdata.gpiod_hpd))
+		anx78xx_poweroff(anx78xx);
+
+	return 0;
+
+err_poweroff:
+	anx78xx_poweroff(anx78xx);
+
+err_unregister_i2c:
+	unregister_i2c_dummy_clients(anx78xx);
+	return err;
+}
+
+static int anx78xx_i2c_remove(struct i2c_client *client)
+{
+	struct anx78xx *anx78xx = i2c_get_clientdata(client);
+
+	drm_bridge_remove(&anx78xx->bridge);
+
+	unregister_i2c_dummy_clients(anx78xx);
+
+	kfree(anx78xx->edid);
+
+	return 0;
+}
+
+static const struct i2c_device_id anx78xx_id[] = {
+	{ "anx7814", 0 },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(i2c, anx78xx_id);
+
+#if IS_ENABLED(CONFIG_OF)
+static const struct of_device_id anx78xx_match_table[] = {
+	{ .compatible = "analogix,anx7814", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, anx78xx_match_table);
+#endif
+
+static struct i2c_driver anx78xx_driver = {
+	.driver = {
+		   .name = "anx7814",
+		   .of_match_table = of_match_ptr(anx78xx_match_table),
+		  },
+	.probe = anx78xx_i2c_probe,
+	.remove = anx78xx_i2c_remove,
+	.id_table = anx78xx_id,
+};
+module_i2c_driver(anx78xx_driver);
+
+MODULE_DESCRIPTION("ANX78xx SlimPort Transmitter driver");
+MODULE_AUTHOR("Enric Balletbo i Serra <enric.balletbo@collabora.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpu/drm/bridge/analogix-anx78xx.h b/drivers/gpu/drm/bridge/analogix-anx78xx.h
new file mode 100644
index 000000000..38753c870
--- /dev/null
+++ b/drivers/gpu/drm/bridge/analogix-anx78xx.h
@@ -0,0 +1,719 @@
+/*
+ * Copyright(c) 2016, Analogix Semiconductor. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ANX78xx_H
+#define __ANX78xx_H
+
+#define TX_P0				0x70
+#define TX_P1				0x7a
+#define TX_P2				0x72
+
+#define RX_P0				0x7e
+#define RX_P1				0x80
+
+/***************************************************************/
+/* Register definition of device address 0x7e                  */
+/***************************************************************/
+
+/*
+ * System Control and Status
+ */
+
+/* Software Reset Register 1 */
+#define SP_SOFTWARE_RESET1_REG		0x11
+#define SP_VIDEO_RST			BIT(4)
+#define SP_HDCP_MAN_RST			BIT(2)
+#define SP_TMDS_RST			BIT(1)
+#define SP_SW_MAN_RST			BIT(0)
+
+/* System Status Register */
+#define SP_SYSTEM_STATUS_REG		0x14
+#define SP_TMDS_CLOCK_DET		BIT(1)
+#define SP_TMDS_DE_DET			BIT(0)
+
+/* HDMI Status Register */
+#define SP_HDMI_STATUS_REG		0x15
+#define SP_HDMI_AUD_LAYOUT		BIT(3)
+#define SP_HDMI_DET			BIT(0)
+#  define SP_DVI_MODE			0
+#  define SP_HDMI_MODE			1
+
+/* HDMI Mute Control Register */
+#define SP_HDMI_MUTE_CTRL_REG		0x16
+#define SP_AUD_MUTE			BIT(1)
+#define SP_VID_MUTE			BIT(0)
+
+/* System Power Down Register 1 */
+#define SP_SYSTEM_POWER_DOWN1_REG	0x18
+#define SP_PWDN_CTRL			BIT(0)
+
+/*
+ * Audio and Video Auto Control
+ */
+
+/* Auto Audio and Video Control register */
+#define SP_AUDVID_CTRL_REG		0x20
+#define SP_AVC_OE			BIT(7)
+#define SP_AAC_OE			BIT(6)
+#define SP_AVC_EN			BIT(1)
+#define SP_AAC_EN			BIT(0)
+
+/* Audio Exception Enable Registers */
+#define SP_AUD_EXCEPTION_ENABLE_BASE	(0x24 - 1)
+/* Bits for Audio Exception Enable Register 3 */
+#define SP_AEC_EN21			BIT(5)
+
+/*
+ * Interrupt
+ */
+
+/* Interrupt Status Register 1 */
+#define SP_INT_STATUS1_REG		0x31
+/* Bits for Interrupt Status Register 1 */
+#define SP_HDMI_DVI			BIT(7)
+#define SP_CKDT_CHG			BIT(6)
+#define SP_SCDT_CHG			BIT(5)
+#define SP_PCLK_CHG			BIT(4)
+#define SP_PLL_UNLOCK			BIT(3)
+#define SP_CABLE_PLUG_CHG		BIT(2)
+#define SP_SET_MUTE			BIT(1)
+#define SP_SW_INTR			BIT(0)
+/* Bits for Interrupt Status Register 2 */
+#define SP_HDCP_ERR			BIT(5)
+#define SP_AUDIO_SAMPLE_CHG		BIT(0)	/* undocumented */
+/* Bits for Interrupt Status Register 3 */
+#define SP_AUD_MODE_CHG			BIT(0)
+/* Bits for Interrupt Status Register 5 */
+#define SP_AUDIO_RCV			BIT(0)
+/* Bits for Interrupt Status Register 6 */
+#define SP_INT_STATUS6_REG		0x36
+#define SP_CTS_RCV			BIT(7)
+#define SP_NEW_AUD_PKT			BIT(4)
+#define SP_NEW_AVI_PKT			BIT(1)
+#define SP_NEW_CP_PKT			BIT(0)
+/* Bits for Interrupt Status Register 7 */
+#define SP_NO_VSI			BIT(7)
+#define SP_NEW_VS			BIT(4)
+
+/* Interrupt Mask 1 Status Registers */
+#define SP_INT_MASK1_REG		0x41
+
+/* HDMI US TIMER Control Register */
+#define SP_HDMI_US_TIMER_CTRL_REG	0x49
+#define SP_MS_TIMER_MARGIN_10_8_MASK	0x07
+
+/*
+ * TMDS Control
+ */
+
+/* TMDS Control Registers */
+#define SP_TMDS_CTRL_BASE		(0x50 - 1)
+/* Bits for TMDS Control Register 7 */
+#define SP_PD_RT			BIT(0)
+
+/*
+ * Video Control
+ */
+
+/* Video Status Register */
+#define SP_VIDEO_STATUS_REG		0x70
+#define SP_COLOR_DEPTH_MASK		0xf0
+#define SP_COLOR_DEPTH_SHIFT		4
+#  define SP_COLOR_DEPTH_MODE_LEGACY	0x00
+#  define SP_COLOR_DEPTH_MODE_24BIT	0x04
+#  define SP_COLOR_DEPTH_MODE_30BIT	0x05
+#  define SP_COLOR_DEPTH_MODE_36BIT	0x06
+#  define SP_COLOR_DEPTH_MODE_48BIT	0x07
+
+/* Video Data Range Control Register */
+#define SP_VID_DATA_RANGE_CTRL_REG	0x83
+#define SP_R2Y_INPUT_LIMIT		BIT(1)
+
+/* Pixel Clock High Resolution Counter Registers */
+#define SP_PCLK_HIGHRES_CNT_BASE	(0x8c - 1)
+
+/*
+ * Audio Control
+ */
+
+/* Number of Audio Channels Status Registers */
+#define SP_AUD_CH_STATUS_REG_NUM	6
+
+/* Audio IN S/PDIF Channel Status Registers */
+#define SP_AUD_SPDIF_CH_STATUS_BASE	0xc7
+
+/* Audio IN S/PDIF Channel Status Register 4 */
+#define SP_FS_FREQ_MASK			0x0f
+#  define SP_FS_FREQ_44100HZ		0x00
+#  define SP_FS_FREQ_48000HZ		0x02
+#  define SP_FS_FREQ_32000HZ		0x03
+#  define SP_FS_FREQ_88200HZ		0x08
+#  define SP_FS_FREQ_96000HZ		0x0a
+#  define SP_FS_FREQ_176400HZ		0x0c
+#  define SP_FS_FREQ_192000HZ		0x0e
+
+/*
+ * Micellaneous Control Block
+ */
+
+/* CHIP Control Register */
+#define SP_CHIP_CTRL_REG		0xe3
+#define SP_MAN_HDMI5V_DET		BIT(3)
+#define SP_PLLLOCK_CKDT_EN		BIT(2)
+#define SP_ANALOG_CKDT_EN		BIT(1)
+#define SP_DIGITAL_CKDT_EN		BIT(0)
+
+/* Packet Receiving Status Register */
+#define SP_PACKET_RECEIVING_STATUS_REG	0xf3
+#define SP_AVI_RCVD			BIT(5)
+#define SP_VSI_RCVD			BIT(1)
+
+/***************************************************************/
+/* Register definition of device address 0x80                  */
+/***************************************************************/
+
+/* HDCP BCAPS Shadow Register */
+#define SP_HDCP_BCAPS_SHADOW_REG	0x2a
+#define SP_BCAPS_REPEATER		BIT(5)
+
+/* HDCP Status Register */
+#define SP_RX_HDCP_STATUS_REG		0x3f
+#define SP_AUTH_EN			BIT(4)
+
+/*
+ * InfoFrame and Control Packet Registers
+ */
+
+/* AVI InfoFrame packet checksum */
+#define SP_AVI_INFOFRAME_CHECKSUM	0xa3
+
+/* AVI InfoFrame Registers */
+#define SP_AVI_INFOFRAME_DATA_BASE	0xa4
+
+#define SP_AVI_COLOR_F_MASK		0x60
+#define SP_AVI_COLOR_F_SHIFT		5
+
+/* Audio InfoFrame Registers */
+#define SP_AUD_INFOFRAME_DATA_BASE	0xc4
+#define SP_AUD_INFOFRAME_LAYOUT_MASK	0x0f
+
+/* MPEG/HDMI Vendor Specific InfoFrame Packet type code */
+#define SP_MPEG_VS_INFOFRAME_TYPE_REG	0xe0
+
+/* MPEG/HDMI Vendor Specific InfoFrame Packet length */
+#define SP_MPEG_VS_INFOFRAME_LEN_REG	0xe2
+
+/* MPEG/HDMI Vendor Specific InfoFrame Packet version number */
+#define SP_MPEG_VS_INFOFRAME_VER_REG	0xe1
+
+/* MPEG/HDMI Vendor Specific InfoFrame Packet content */
+#define SP_MPEG_VS_INFOFRAME_DATA_BASE	0xe4
+
+/* General Control Packet Register */
+#define SP_GENERAL_CTRL_PACKET_REG	0x9f
+#define SP_CLEAR_AVMUTE			BIT(4)
+#define SP_SET_AVMUTE			BIT(0)
+
+/***************************************************************/
+/* Register definition of device address 0x70                  */
+/***************************************************************/
+
+/* HDCP Status Register */
+#define SP_TX_HDCP_STATUS_REG		0x00
+#define SP_AUTH_FAIL			BIT(5)
+#define SP_AUTHEN_PASS			BIT(1)
+
+/* HDCP Control Register 0 */
+#define SP_HDCP_CTRL0_REG		0x01
+#define SP_RX_REPEATER			BIT(6)
+#define SP_RE_AUTH			BIT(5)
+#define SP_SW_AUTH_OK			BIT(4)
+#define SP_HARD_AUTH_EN			BIT(3)
+#define SP_HDCP_ENC_EN			BIT(2)
+#define SP_BKSV_SRM_PASS		BIT(1)
+#define SP_KSVLIST_VLD			BIT(0)
+/* HDCP Function Enabled */
+#define SP_HDCP_FUNCTION_ENABLED	(BIT(0) | BIT(1) | BIT(2) | BIT(3))
+
+/* HDCP Receiver BSTATUS Register 0 */
+#define	SP_HDCP_RX_BSTATUS0_REG		0x1b
+/* HDCP Receiver BSTATUS Register 1 */
+#define	SP_HDCP_RX_BSTATUS1_REG		0x1c
+
+/* HDCP Embedded "Blue Screen" Content Registers */
+#define SP_HDCP_VID0_BLUE_SCREEN_REG	0x2c
+#define SP_HDCP_VID1_BLUE_SCREEN_REG	0x2d
+#define SP_HDCP_VID2_BLUE_SCREEN_REG	0x2e
+
+/* HDCP Wait R0 Timing Register */
+#define SP_HDCP_WAIT_R0_TIME_REG	0x40
+
+/* HDCP Link Integrity Check Timer Register */
+#define SP_HDCP_LINK_CHECK_TIMER_REG	0x41
+
+/* HDCP Repeater Ready Wait Timer Register */
+#define SP_HDCP_RPTR_RDY_WAIT_TIME_REG	0x42
+
+/* HDCP Auto Timer Register */
+#define SP_HDCP_AUTO_TIMER_REG		0x51
+
+/* HDCP Key Status Register */
+#define SP_HDCP_KEY_STATUS_REG		0x5e
+
+/* HDCP Key Command Register */
+#define SP_HDCP_KEY_COMMAND_REG		0x5f
+#define SP_DISABLE_SYNC_HDCP		BIT(2)
+
+/* OTP Memory Key Protection Registers */
+#define SP_OTP_KEY_PROTECT1_REG		0x60
+#define SP_OTP_KEY_PROTECT2_REG		0x61
+#define SP_OTP_KEY_PROTECT3_REG		0x62
+#define SP_OTP_PSW1			0xa2
+#define SP_OTP_PSW2			0x7e
+#define SP_OTP_PSW3			0xc6
+
+/* DP System Control Registers */
+#define SP_DP_SYSTEM_CTRL_BASE		(0x80 - 1)
+/* Bits for DP System Control Register 2 */
+#define SP_CHA_STA			BIT(2)
+/* Bits for DP System Control Register 3 */
+#define SP_HPD_STATUS			BIT(6)
+#define SP_STRM_VALID			BIT(2)
+/* Bits for DP System Control Register 4 */
+#define SP_ENHANCED_MODE		BIT(3)
+
+/* DP Video Control Register */
+#define SP_DP_VIDEO_CTRL_REG		0x84
+#define SP_COLOR_F_MASK			0x06
+#define SP_COLOR_F_SHIFT		1
+#define SP_BPC_MASK			0xe0
+#define SP_BPC_SHIFT			5
+#  define SP_BPC_6BITS			0x00
+#  define SP_BPC_8BITS			0x01
+#  define SP_BPC_10BITS			0x02
+#  define SP_BPC_12BITS			0x03
+
+/* DP Audio Control Register */
+#define SP_DP_AUDIO_CTRL_REG		0x87
+#define SP_AUD_EN			BIT(0)
+
+/* 10us Pulse Generate Timer Registers */
+#define SP_I2C_GEN_10US_TIMER0_REG	0x88
+#define SP_I2C_GEN_10US_TIMER1_REG	0x89
+
+/* Packet Send Control Register */
+#define SP_PACKET_SEND_CTRL_REG		0x90
+#define SP_AUD_IF_UP			BIT(7)
+#define SP_AVI_IF_UD			BIT(6)
+#define SP_MPEG_IF_UD			BIT(5)
+#define SP_SPD_IF_UD			BIT(4)
+#define SP_AUD_IF_EN			BIT(3)
+#define SP_AVI_IF_EN			BIT(2)
+#define SP_MPEG_IF_EN			BIT(1)
+#define SP_SPD_IF_EN			BIT(0)
+
+/* DP HDCP Control Register */
+#define SP_DP_HDCP_CTRL_REG		0x92
+#define SP_AUTO_EN			BIT(7)
+#define SP_AUTO_START			BIT(5)
+#define SP_LINK_POLLING			BIT(1)
+
+/* DP Main Link Bandwidth Setting Register */
+#define SP_DP_MAIN_LINK_BW_SET_REG	0xa0
+#define SP_LINK_BW_SET_MASK		0x1f
+#define SP_INITIAL_SLIM_M_AUD_SEL	BIT(5)
+
+/* DP Training Pattern Set Register */
+#define SP_DP_TRAINING_PATTERN_SET_REG	0xa2
+
+/* DP Lane 0 Link Training Control Register */
+#define SP_DP_LANE0_LT_CTRL_REG		0xa3
+#define SP_TX_SW_SET_MASK		0x1b
+#define SP_MAX_PRE_REACH		BIT(5)
+#define SP_MAX_DRIVE_REACH		BIT(4)
+#define SP_PRE_EMP_LEVEL1		BIT(3)
+#define SP_DRVIE_CURRENT_LEVEL1		BIT(0)
+
+/* DP Link Training Control Register */
+#define SP_DP_LT_CTRL_REG		0xa8
+#define SP_LT_ERROR_TYPE_MASK		0x70
+#  define SP_LT_NO_ERROR		0x00
+#  define SP_LT_AUX_WRITE_ERROR		0x01
+#  define SP_LT_MAX_DRIVE_REACHED	0x02
+#  define SP_LT_WRONG_LANE_COUNT_SET	0x03
+#  define SP_LT_LOOP_SAME_5_TIME	0x04
+#  define SP_LT_CR_FAIL_IN_EQ		0x05
+#  define SP_LT_EQ_LOOP_5_TIME		0x06
+#define SP_LT_EN			BIT(0)
+
+/* DP CEP Training Control Registers */
+#define SP_DP_CEP_TRAINING_CTRL0_REG	0xa9
+#define SP_DP_CEP_TRAINING_CTRL1_REG	0xaa
+
+/* DP Debug Register 1 */
+#define SP_DP_DEBUG1_REG		0xb0
+#define SP_DEBUG_PLL_LOCK		BIT(4)
+#define SP_POLLING_EN			BIT(1)
+
+/* DP Polling Control Register */
+#define SP_DP_POLLING_CTRL_REG		0xb4
+#define SP_AUTO_POLLING_DISABLE		BIT(0)
+
+/* DP Link Debug Control Register */
+#define SP_DP_LINK_DEBUG_CTRL_REG	0xb8
+#define SP_M_VID_DEBUG			BIT(5)
+#define SP_NEW_PRBS7			BIT(4)
+#define SP_INSERT_ER			BIT(1)
+#define SP_PRBS31_EN			BIT(0)
+
+/* AUX Misc control Register */
+#define SP_AUX_MISC_CTRL_REG		0xbf
+
+/* DP PLL control Register */
+#define SP_DP_PLL_CTRL_REG		0xc7
+#define SP_PLL_RST			BIT(6)
+
+/* DP Analog Power Down Register */
+#define SP_DP_ANALOG_POWER_DOWN_REG	0xc8
+#define SP_CH0_PD			BIT(0)
+
+/* DP Misc Control Register */
+#define SP_DP_MISC_CTRL_REG		0xcd
+#define SP_EQ_TRAINING_LOOP		BIT(6)
+
+/* DP Extra I2C Device Address Register */
+#define SP_DP_EXTRA_I2C_DEV_ADDR_REG	0xce
+#define SP_I2C_STRETCH_DISABLE		BIT(7)
+
+#define SP_I2C_EXTRA_ADDR		0x50
+
+/* DP Downspread Control Register 1 */
+#define SP_DP_DOWNSPREAD_CTRL1_REG	0xd0
+
+/* DP M Value Calculation Control Register */
+#define SP_DP_M_CALCULATION_CTRL_REG	0xd9
+#define SP_M_GEN_CLK_SEL		BIT(0)
+
+/* AUX Channel Access Status Register */
+#define SP_AUX_CH_STATUS_REG		0xe0
+#define SP_AUX_STATUS			0x0f
+
+/* AUX Channel DEFER Control Register */
+#define SP_AUX_DEFER_CTRL_REG		0xe2
+#define SP_DEFER_CTRL_EN		BIT(7)
+
+/* DP Buffer Data Count Register */
+#define SP_BUF_DATA_COUNT_REG		0xe4
+#define SP_BUF_DATA_COUNT_MASK		0x1f
+#define SP_BUF_CLR			BIT(7)
+
+/* DP AUX Channel Control Register 1 */
+#define SP_DP_AUX_CH_CTRL1_REG		0xe5
+#define SP_AUX_TX_COMM_MASK		0x0f
+#define SP_AUX_LENGTH_MASK		0xf0
+#define SP_AUX_LENGTH_SHIFT		4
+
+/* DP AUX CH Address Register 0 */
+#define SP_AUX_ADDR_7_0_REG		0xe6
+
+/* DP AUX CH Address Register 1 */
+#define SP_AUX_ADDR_15_8_REG		0xe7
+
+/* DP AUX CH Address Register 2 */
+#define SP_AUX_ADDR_19_16_REG		0xe8
+#define SP_AUX_ADDR_19_16_MASK		0x0f
+
+/* DP AUX Channel Control Register 2 */
+#define SP_DP_AUX_CH_CTRL2_REG		0xe9
+#define SP_AUX_SEL_RXCM			BIT(6)
+#define SP_AUX_CHSEL			BIT(3)
+#define SP_AUX_PN_INV			BIT(2)
+#define SP_ADDR_ONLY			BIT(1)
+#define SP_AUX_EN			BIT(0)
+
+/* DP Video Stream Control InfoFrame Register */
+#define SP_DP_3D_VSC_CTRL_REG		0xea
+#define SP_INFO_FRAME_VSC_EN		BIT(0)
+
+/* DP Video Stream Data Byte 1 Register */
+#define SP_DP_VSC_DB1_REG		0xeb
+
+/* DP AUX Channel Control Register 3 */
+#define SP_DP_AUX_CH_CTRL3_REG		0xec
+#define SP_WAIT_COUNTER_7_0_MASK	0xff
+
+/* DP AUX Channel Control Register 4 */
+#define SP_DP_AUX_CH_CTRL4_REG		0xed
+
+/* DP AUX Buffer Data Registers */
+#define SP_DP_BUF_DATA0_REG		0xf0
+
+/***************************************************************/
+/* Register definition of device address 0x72                  */
+/***************************************************************/
+
+/*
+ * Core Register Definitions
+ */
+
+/* Device ID Low Byte Register */
+#define SP_DEVICE_IDL_REG		0x02
+
+/* Device ID High Byte Register */
+#define SP_DEVICE_IDH_REG		0x03
+
+/* Device version register */
+#define SP_DEVICE_VERSION_REG		0x04
+
+/* Power Down Control Register */
+#define SP_POWERDOWN_CTRL_REG		0x05
+#define SP_REGISTER_PD			BIT(7)
+#define SP_HDCP_PD			BIT(5)
+#define SP_AUDIO_PD			BIT(4)
+#define SP_VIDEO_PD			BIT(3)
+#define SP_LINK_PD			BIT(2)
+#define SP_TOTAL_PD			BIT(1)
+
+/* Reset Control Register 1 */
+#define SP_RESET_CTRL1_REG		0x06
+#define SP_MISC_RST			BIT(7)
+#define SP_VIDCAP_RST			BIT(6)
+#define SP_VIDFIF_RST			BIT(5)
+#define SP_AUDFIF_RST			BIT(4)
+#define SP_AUDCAP_RST			BIT(3)
+#define SP_HDCP_RST			BIT(2)
+#define SP_SW_RST			BIT(1)
+#define SP_HW_RST			BIT(0)
+
+/* Reset Control Register 2 */
+#define SP_RESET_CTRL2_REG		0x07
+#define SP_AUX_RST			BIT(2)
+#define SP_SERDES_FIFO_RST		BIT(1)
+#define SP_I2C_REG_RST			BIT(0)
+
+/* Video Control Register 1 */
+#define SP_VID_CTRL1_REG		0x08
+#define SP_VIDEO_EN			BIT(7)
+#define SP_VIDEO_MUTE			BIT(2)
+#define SP_DE_GEN			BIT(1)
+#define SP_DEMUX			BIT(0)
+
+/* Video Control Register 2 */
+#define SP_VID_CTRL2_REG		0x09
+#define SP_IN_COLOR_F_MASK		0x03
+#define SP_IN_YC_BIT_SEL		BIT(2)
+#define SP_IN_BPC_MASK			0x70
+#define SP_IN_BPC_SHIFT			4
+#  define SP_IN_BPC_12BIT		0x03
+#  define SP_IN_BPC_10BIT		0x02
+#  define SP_IN_BPC_8BIT		0x01
+#  define SP_IN_BPC_6BIT		0x00
+#define SP_IN_D_RANGE			BIT(7)
+
+/* Video Control Register 3 */
+#define SP_VID_CTRL3_REG		0x0a
+#define SP_HPD_OUT			BIT(6)
+
+/* Video Control Register 5 */
+#define SP_VID_CTRL5_REG		0x0c
+#define SP_CSC_STD_SEL			BIT(7)
+#define SP_XVYCC_RNG_LMT		BIT(6)
+#define SP_RANGE_Y2R			BIT(5)
+#define SP_CSPACE_Y2R			BIT(4)
+#define SP_RGB_RNG_LMT			BIT(3)
+#define SP_Y_RNG_LMT			BIT(2)
+#define SP_RANGE_R2Y			BIT(1)
+#define SP_CSPACE_R2Y			BIT(0)
+
+/* Video Control Register 6 */
+#define SP_VID_CTRL6_REG		0x0d
+#define SP_TEST_PATTERN_EN		BIT(7)
+#define SP_VIDEO_PROCESS_EN		BIT(6)
+#define SP_VID_US_MODE			BIT(3)
+#define SP_VID_DS_MODE			BIT(2)
+#define SP_UP_SAMPLE			BIT(1)
+#define SP_DOWN_SAMPLE			BIT(0)
+
+/* Video Control Register 8 */
+#define SP_VID_CTRL8_REG		0x0f
+#define SP_VID_VRES_TH			BIT(0)
+
+/* Total Line Status Low Byte Register */
+#define SP_TOTAL_LINE_STAL_REG		0x24
+
+/* Total Line Status High Byte Register */
+#define SP_TOTAL_LINE_STAH_REG		0x25
+
+/* Active Line Status Low Byte Register */
+#define SP_ACT_LINE_STAL_REG		0x26
+
+/* Active Line Status High Byte Register */
+#define SP_ACT_LINE_STAH_REG		0x27
+
+/* Vertical Front Porch Status Register */
+#define SP_V_F_PORCH_STA_REG		0x28
+
+/* Vertical SYNC Width Status Register */
+#define SP_V_SYNC_STA_REG		0x29
+
+/* Vertical Back Porch Status Register */
+#define SP_V_B_PORCH_STA_REG		0x2a
+
+/* Total Pixel Status Low Byte Register */
+#define SP_TOTAL_PIXEL_STAL_REG		0x2b
+
+/* Total Pixel Status High Byte Register */
+#define SP_TOTAL_PIXEL_STAH_REG		0x2c
+
+/* Active Pixel Status Low Byte Register */
+#define SP_ACT_PIXEL_STAL_REG		0x2d
+
+/* Active Pixel Status High Byte Register */
+#define SP_ACT_PIXEL_STAH_REG		0x2e
+
+/* Horizontal Front Porch Status Low Byte Register */
+#define SP_H_F_PORCH_STAL_REG		0x2f
+
+/* Horizontal Front Porch Statys High Byte Register */
+#define SP_H_F_PORCH_STAH_REG		0x30
+
+/* Horizontal SYNC Width Status Low Byte Register */
+#define SP_H_SYNC_STAL_REG		0x31
+
+/* Horizontal SYNC Width Status High Byte Register */
+#define SP_H_SYNC_STAH_REG		0x32
+
+/* Horizontal Back Porch Status Low Byte Register */
+#define SP_H_B_PORCH_STAL_REG		0x33
+
+/* Horizontal Back Porch Status High Byte Register */
+#define SP_H_B_PORCH_STAH_REG		0x34
+
+/* InfoFrame AVI Packet DB1 Register */
+#define SP_INFOFRAME_AVI_DB1_REG	0x70
+
+/* Bit Control Specific Register */
+#define SP_BIT_CTRL_SPECIFIC_REG	0x80
+#define SP_BIT_CTRL_SELECT_SHIFT	1
+#define SP_ENABLE_BIT_CTRL		BIT(0)
+
+/* InfoFrame Audio Packet DB1 Register */
+#define SP_INFOFRAME_AUD_DB1_REG	0x83
+
+/* InfoFrame MPEG Packet DB1 Register */
+#define SP_INFOFRAME_MPEG_DB1_REG	0xb0
+
+/* Audio Channel Status Registers */
+#define SP_AUD_CH_STATUS_BASE		0xd0
+
+/* Audio Channel Num Register 5 */
+#define SP_I2S_CHANNEL_NUM_MASK		0xe0
+#  define SP_I2S_CH_NUM_1		(0x00 << 5)
+#  define SP_I2S_CH_NUM_2		(0x01 << 5)
+#  define SP_I2S_CH_NUM_3		(0x02 << 5)
+#  define SP_I2S_CH_NUM_4		(0x03 << 5)
+#  define SP_I2S_CH_NUM_5		(0x04 << 5)
+#  define SP_I2S_CH_NUM_6		(0x05 << 5)
+#  define SP_I2S_CH_NUM_7		(0x06 << 5)
+#  define SP_I2S_CH_NUM_8		(0x07 << 5)
+#define SP_EXT_VUCP			BIT(2)
+#define SP_VBIT				BIT(1)
+#define SP_AUDIO_LAYOUT			BIT(0)
+
+/* Analog Debug Register 2 */
+#define SP_ANALOG_DEBUG2_REG		0xdd
+#define SP_FORCE_SW_OFF_BYPASS		0x20
+#define SP_XTAL_FRQ			0x1c
+#  define SP_XTAL_FRQ_19M2		(0x00 << 2)
+#  define SP_XTAL_FRQ_24M		(0x01 << 2)
+#  define SP_XTAL_FRQ_25M		(0x02 << 2)
+#  define SP_XTAL_FRQ_26M		(0x03 << 2)
+#  define SP_XTAL_FRQ_27M		(0x04 << 2)
+#  define SP_XTAL_FRQ_38M4		(0x05 << 2)
+#  define SP_XTAL_FRQ_52M		(0x06 << 2)
+#define SP_POWERON_TIME_1P5MS		0x03
+
+/* Analog Control 0 Register */
+#define SP_ANALOG_CTRL0_REG		0xe1
+
+/* Common Interrupt Status Register 1 */
+#define SP_COMMON_INT_STATUS_BASE	(0xf1 - 1)
+#define SP_PLL_LOCK_CHG			0x40
+
+/* Common Interrupt Status Register 2 */
+#define SP_COMMON_INT_STATUS2		0xf2
+#define SP_HDCP_AUTH_CHG		BIT(1)
+#define SP_HDCP_AUTH_DONE		BIT(0)
+
+#define SP_HDCP_LINK_CHECK_FAIL		BIT(0)
+
+/* Common Interrupt Status Register 4 */
+#define SP_COMMON_INT_STATUS4_REG	0xf4
+#define SP_HPD_IRQ			BIT(6)
+#define SP_HPD_ESYNC_ERR		BIT(4)
+#define SP_HPD_CHG			BIT(2)
+#define SP_HPD_LOST			BIT(1)
+#define SP_HPD_PLUG			BIT(0)
+
+/* DP Interrupt Status Register */
+#define SP_DP_INT_STATUS1_REG		0xf7
+#define SP_TRAINING_FINISH		BIT(5)
+#define SP_POLLING_ERR			BIT(4)
+
+/* Common Interrupt Mask Register */
+#define SP_COMMON_INT_MASK_BASE		(0xf8 - 1)
+
+#define SP_COMMON_INT_MASK4_REG		0xfb
+
+/* DP Interrupts Mask Register */
+#define SP_DP_INT_MASK1_REG		0xfe
+
+/* Interrupt Control Register */
+#define SP_INT_CTRL_REG			0xff
+
+/***************************************************************/
+/* Register definition of device address 0x7a                  */
+/***************************************************************/
+
+/* DP TX Link Training Control Register */
+#define SP_DP_TX_LT_CTRL0_REG		0x30
+
+/* PD 1.2 Lint Training 80bit Pattern Register */
+#define SP_DP_LT_80BIT_PATTERN0_REG	0x80
+#define SP_DP_LT_80BIT_PATTERN_REG_NUM	10
+
+/* Audio Interface Control Register 0 */
+#define SP_AUD_INTERFACE_CTRL0_REG	0x5f
+#define SP_AUD_INTERFACE_DISABLE	0x80
+
+/* Audio Interface Control Register 2 */
+#define SP_AUD_INTERFACE_CTRL2_REG	0x60
+#define SP_M_AUD_ADJUST_ST		0x04
+
+/* Audio Interface Control Register 3 */
+#define SP_AUD_INTERFACE_CTRL3_REG	0x62
+
+/* Audio Interface Control Register 4 */
+#define SP_AUD_INTERFACE_CTRL4_REG	0x67
+
+/* Audio Interface Control Register 5 */
+#define SP_AUD_INTERFACE_CTRL5_REG	0x68
+
+/* Audio Interface Control Register 6 */
+#define SP_AUD_INTERFACE_CTRL6_REG	0x69
+
+/* Firmware Version Register */
+#define SP_FW_VER_REG			0xb7
+
+#endif
diff --git a/drivers/gpu/drm/bridge/analogix/Kconfig b/drivers/gpu/drm/bridge/analogix/Kconfig
new file mode 100644
index 000000000..80f286fa3
--- /dev/null
+++ b/drivers/gpu/drm/bridge/analogix/Kconfig
@@ -0,0 +1,3 @@
+config DRM_ANALOGIX_DP
+	tristate
+	depends on DRM
diff --git a/drivers/gpu/drm/bridge/analogix/Makefile b/drivers/gpu/drm/bridge/analogix/Makefile
new file mode 100644
index 000000000..cd4010ba6
--- /dev/null
+++ b/drivers/gpu/drm/bridge/analogix/Makefile
@@ -0,0 +1,2 @@
+analogix_dp-objs := analogix_dp_core.o analogix_dp_reg.o
+obj-$(CONFIG_DRM_ANALOGIX_DP) += analogix_dp.o
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
new file mode 100644
index 000000000..e21c7673c
--- /dev/null
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -0,0 +1,1749 @@
+/*
+* Analogix DP (Display Port) core interface driver.
+*
+* Copyright (C) 2012 Samsung Electronics Co., Ltd.
+* Author: Jingoo Han <jg1.han@samsung.com>
+*
+* This program is free software; you can redistribute it and/or modify it
+* under the terms of the GNU General Public License as published by the
+* Free Software Foundation; either version 2 of the License, or (at your
+* option) any later version.
+*/
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/interrupt.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/gpio.h>
+#include <linux/component.h>
+#include <linux/phy/phy.h>
+
+#include <drm/drmP.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_panel.h>
+
+#include <drm/bridge/analogix_dp.h>
+
+#include "analogix_dp_core.h"
+#include "analogix_dp_reg.h"
+
+#define to_dp(nm)	container_of(nm, struct analogix_dp_device, nm)
+
+static const bool verify_fast_training;
+
+struct bridge_init {
+	struct i2c_client *client;
+	struct device_node *node;
+};
+
+static int analogix_dp_init_dp(struct analogix_dp_device *dp)
+{
+	int ret;
+
+	analogix_dp_reset(dp);
+
+	analogix_dp_swreset(dp);
+
+	analogix_dp_init_analog_param(dp);
+	analogix_dp_init_interrupt(dp);
+
+	/* SW defined function Normal operation */
+	analogix_dp_enable_sw_function(dp);
+
+	analogix_dp_config_interrupt(dp);
+	ret = analogix_dp_init_analog_func(dp);
+	if (ret)
+		return ret;
+
+	analogix_dp_init_hpd(dp);
+	analogix_dp_init_aux(dp);
+	return 0;
+}
+
+static int analogix_dp_detect_hpd(struct analogix_dp_device *dp)
+{
+	int timeout_loop = 0;
+
+	while (timeout_loop < DP_TIMEOUT_LOOP_COUNT) {
+		if (analogix_dp_get_plug_in_status(dp) == 0)
+			return 0;
+
+		timeout_loop++;
+		usleep_range(1000, 1100);
+	}
+
+	/*
+	 * Some edp screen do not have hpd signal, so we can't just
+	 * return failed when hpd plug in detect failed, DT property
+	 * "force-hpd" would indicate whether driver need this.
+	 */
+	if (!dp->force_hpd)
+		return -ETIMEDOUT;
+
+	/*
+	 * The eDP TRM indicate that if HPD_STATUS(RO) is 0, AUX CH
+	 * will not work, so we need to give a force hpd action to
+	 * set HPD_STATUS manually.
+	 */
+	dev_dbg(dp->dev, "failed to get hpd plug status, try to force hpd\n");
+
+	analogix_dp_force_hpd(dp);
+
+	if (analogix_dp_get_plug_in_status(dp) != 0) {
+		dev_err(dp->dev, "failed to get hpd plug in status\n");
+		return -EINVAL;
+	}
+
+	dev_dbg(dp->dev, "success to get plug in status after force hpd\n");
+
+	return 0;
+}
+
+int analogix_dp_psr_enabled(struct analogix_dp_device *dp)
+{
+
+	return dp->psr_enable;
+}
+EXPORT_SYMBOL_GPL(analogix_dp_psr_enabled);
+
+int analogix_dp_enable_psr(struct analogix_dp_device *dp)
+{
+	struct edp_vsc_psr psr_vsc;
+
+	if (!dp->psr_enable)
+		return 0;
+
+	/* Prepare VSC packet as per EDP 1.4 spec, Table 6.9 */
+	memset(&psr_vsc, 0, sizeof(psr_vsc));
+	psr_vsc.sdp_header.HB0 = 0;
+	psr_vsc.sdp_header.HB1 = 0x7;
+	psr_vsc.sdp_header.HB2 = 0x2;
+	psr_vsc.sdp_header.HB3 = 0x8;
+
+	psr_vsc.DB0 = 0;
+	psr_vsc.DB1 = EDP_VSC_PSR_STATE_ACTIVE | EDP_VSC_PSR_CRC_VALUES_VALID;
+
+	return analogix_dp_send_psr_spd(dp, &psr_vsc, true);
+}
+EXPORT_SYMBOL_GPL(analogix_dp_enable_psr);
+
+int analogix_dp_disable_psr(struct analogix_dp_device *dp)
+{
+	struct edp_vsc_psr psr_vsc;
+	int ret;
+
+	if (!dp->psr_enable)
+		return 0;
+
+	/* Prepare VSC packet as per EDP 1.4 spec, Table 6.9 */
+	memset(&psr_vsc, 0, sizeof(psr_vsc));
+	psr_vsc.sdp_header.HB0 = 0;
+	psr_vsc.sdp_header.HB1 = 0x7;
+	psr_vsc.sdp_header.HB2 = 0x2;
+	psr_vsc.sdp_header.HB3 = 0x8;
+
+	psr_vsc.DB0 = 0;
+	psr_vsc.DB1 = 0;
+
+	ret = drm_dp_dpcd_writeb(&dp->aux, DP_SET_POWER, DP_SET_POWER_D0);
+	if (ret != 1) {
+		dev_err(dp->dev, "Failed to set DP Power0 %d\n", ret);
+		return ret;
+	}
+
+	return analogix_dp_send_psr_spd(dp, &psr_vsc, false);
+}
+EXPORT_SYMBOL_GPL(analogix_dp_disable_psr);
+
+static int analogix_dp_detect_sink_psr(struct analogix_dp_device *dp)
+{
+	unsigned char psr_version;
+	int ret;
+
+	ret = drm_dp_dpcd_readb(&dp->aux, DP_PSR_SUPPORT, &psr_version);
+	if (ret != 1) {
+		dev_err(dp->dev, "failed to get PSR version, disable it\n");
+		return ret;
+	}
+
+	dev_dbg(dp->dev, "Panel PSR version : %x\n", psr_version);
+
+	dp->psr_enable = (psr_version & DP_PSR_IS_SUPPORTED) ? true : false;
+
+	return 0;
+}
+
+static int analogix_dp_enable_sink_psr(struct analogix_dp_device *dp)
+{
+	unsigned char psr_en;
+	int ret;
+
+	/* Disable psr function */
+	ret = drm_dp_dpcd_readb(&dp->aux, DP_PSR_EN_CFG, &psr_en);
+	if (ret != 1) {
+		dev_err(dp->dev, "failed to get psr config\n");
+		goto end;
+	}
+
+	psr_en &= ~DP_PSR_ENABLE;
+	ret = drm_dp_dpcd_writeb(&dp->aux, DP_PSR_EN_CFG, psr_en);
+	if (ret != 1) {
+		dev_err(dp->dev, "failed to disable panel psr\n");
+		goto end;
+	}
+
+	/* Main-Link transmitter remains active during PSR active states */
+	psr_en = DP_PSR_MAIN_LINK_ACTIVE | DP_PSR_CRC_VERIFICATION;
+	ret = drm_dp_dpcd_writeb(&dp->aux, DP_PSR_EN_CFG, psr_en);
+	if (ret != 1) {
+		dev_err(dp->dev, "failed to set panel psr\n");
+		goto end;
+	}
+
+	/* Enable psr function */
+	psr_en = DP_PSR_ENABLE | DP_PSR_MAIN_LINK_ACTIVE |
+		 DP_PSR_CRC_VERIFICATION;
+	ret = drm_dp_dpcd_writeb(&dp->aux, DP_PSR_EN_CFG, psr_en);
+	if (ret != 1) {
+		dev_err(dp->dev, "failed to set panel psr\n");
+		goto end;
+	}
+
+	analogix_dp_enable_psr_crc(dp);
+
+	return 0;
+end:
+	dev_err(dp->dev, "enable psr fail, force to disable psr\n");
+	dp->psr_enable = false;
+
+	return ret;
+}
+
+static int
+analogix_dp_enable_rx_to_enhanced_mode(struct analogix_dp_device *dp,
+				       bool enable)
+{
+	u8 data;
+	int ret;
+
+	ret = drm_dp_dpcd_readb(&dp->aux, DP_LANE_COUNT_SET, &data);
+	if (ret != 1)
+		return ret;
+
+	if (enable)
+		ret = drm_dp_dpcd_writeb(&dp->aux, DP_LANE_COUNT_SET,
+					 DP_LANE_COUNT_ENHANCED_FRAME_EN |
+					 DPCD_LANE_COUNT_SET(data));
+	else
+		ret = drm_dp_dpcd_writeb(&dp->aux, DP_LANE_COUNT_SET,
+					 DPCD_LANE_COUNT_SET(data));
+
+	return ret < 0 ? ret : 0;
+}
+
+static int analogix_dp_is_enhanced_mode_available(struct analogix_dp_device *dp,
+						  u8 *enhanced_mode_support)
+{
+	u8 data;
+	int ret;
+
+	ret = drm_dp_dpcd_readb(&dp->aux, DP_MAX_LANE_COUNT, &data);
+	if (ret != 1) {
+		*enhanced_mode_support = 0;
+		return ret;
+	}
+
+	*enhanced_mode_support = DPCD_ENHANCED_FRAME_CAP(data);
+
+	return 0;
+}
+
+static int analogix_dp_set_enhanced_mode(struct analogix_dp_device *dp)
+{
+	u8 data;
+	int ret;
+
+	ret = analogix_dp_is_enhanced_mode_available(dp, &data);
+	if (ret < 0)
+		return ret;
+
+	ret = analogix_dp_enable_rx_to_enhanced_mode(dp, data);
+	if (ret < 0)
+		return ret;
+
+	analogix_dp_enable_enhanced_mode(dp, data);
+
+	return 0;
+}
+
+static int analogix_dp_training_pattern_dis(struct analogix_dp_device *dp)
+{
+	int ret;
+
+	analogix_dp_set_training_pattern(dp, DP_NONE);
+
+	ret = drm_dp_dpcd_writeb(&dp->aux, DP_TRAINING_PATTERN_SET,
+				 DP_TRAINING_PATTERN_DISABLE);
+
+	return ret < 0 ? ret : 0;
+}
+
+static void
+analogix_dp_set_lane_lane_pre_emphasis(struct analogix_dp_device *dp,
+				       int pre_emphasis, int lane)
+{
+	switch (lane) {
+	case 0:
+		analogix_dp_set_lane0_pre_emphasis(dp, pre_emphasis);
+		break;
+	case 1:
+		analogix_dp_set_lane1_pre_emphasis(dp, pre_emphasis);
+		break;
+
+	case 2:
+		analogix_dp_set_lane2_pre_emphasis(dp, pre_emphasis);
+		break;
+
+	case 3:
+		analogix_dp_set_lane3_pre_emphasis(dp, pre_emphasis);
+		break;
+	}
+}
+
+static int analogix_dp_link_start(struct analogix_dp_device *dp)
+{
+	u8 buf[4];
+	int lane, lane_count, pll_tries, retval;
+
+	lane_count = dp->link_train.lane_count;
+
+	dp->link_train.lt_state = CLOCK_RECOVERY;
+	dp->link_train.eq_loop = 0;
+
+	for (lane = 0; lane < lane_count; lane++)
+		dp->link_train.cr_loop[lane] = 0;
+
+	/* Set link rate and count as you want to establish*/
+	analogix_dp_set_link_bandwidth(dp, dp->link_train.link_rate);
+	analogix_dp_set_lane_count(dp, dp->link_train.lane_count);
+
+	/* Setup RX configuration */
+	buf[0] = dp->link_train.link_rate;
+	buf[1] = dp->link_train.lane_count;
+	retval = drm_dp_dpcd_write(&dp->aux, DP_LINK_BW_SET, buf, 2);
+	if (retval < 0)
+		return retval;
+	/* set enhanced mode if available */
+	retval = analogix_dp_set_enhanced_mode(dp);
+	if (retval < 0) {
+		dev_err(dp->dev, "failed to set enhance mode\n");
+		return retval;
+	}
+
+	/* Set TX pre-emphasis to minimum */
+	for (lane = 0; lane < lane_count; lane++)
+		analogix_dp_set_lane_lane_pre_emphasis(dp,
+			PRE_EMPHASIS_LEVEL_0, lane);
+
+	/* Wait for PLL lock */
+	pll_tries = 0;
+	while (analogix_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) {
+		if (pll_tries == DP_TIMEOUT_LOOP_COUNT) {
+			dev_err(dp->dev, "Wait for PLL lock timed out\n");
+			return -ETIMEDOUT;
+		}
+
+		pll_tries++;
+		usleep_range(90, 120);
+	}
+
+	/* Set training pattern 1 */
+	analogix_dp_set_training_pattern(dp, TRAINING_PTN1);
+
+	/* Set RX training pattern */
+	retval = drm_dp_dpcd_writeb(&dp->aux, DP_TRAINING_PATTERN_SET,
+				    DP_LINK_SCRAMBLING_DISABLE |
+					DP_TRAINING_PATTERN_1);
+	if (retval < 0)
+		return retval;
+
+	for (lane = 0; lane < lane_count; lane++)
+		buf[lane] = DP_TRAIN_PRE_EMPH_LEVEL_0 |
+			    DP_TRAIN_VOLTAGE_SWING_LEVEL_0;
+
+	retval = drm_dp_dpcd_write(&dp->aux, DP_TRAINING_LANE0_SET, buf,
+				   lane_count);
+	if (retval < 0)
+		return retval;
+
+	return 0;
+}
+
+static unsigned char analogix_dp_get_lane_status(u8 link_status[2], int lane)
+{
+	int shift = (lane & 1) * 4;
+	u8 link_value = link_status[lane >> 1];
+
+	return (link_value >> shift) & 0xf;
+}
+
+static int analogix_dp_clock_recovery_ok(u8 link_status[2], int lane_count)
+{
+	int lane;
+	u8 lane_status;
+
+	for (lane = 0; lane < lane_count; lane++) {
+		lane_status = analogix_dp_get_lane_status(link_status, lane);
+		if ((lane_status & DP_LANE_CR_DONE) == 0)
+			return -EINVAL;
+	}
+	return 0;
+}
+
+static int analogix_dp_channel_eq_ok(u8 link_status[2], u8 link_align,
+				     int lane_count)
+{
+	int lane;
+	u8 lane_status;
+
+	if ((link_align & DP_INTERLANE_ALIGN_DONE) == 0)
+		return -EINVAL;
+
+	for (lane = 0; lane < lane_count; lane++) {
+		lane_status = analogix_dp_get_lane_status(link_status, lane);
+		lane_status &= DP_CHANNEL_EQ_BITS;
+		if (lane_status != DP_CHANNEL_EQ_BITS)
+			return -EINVAL;
+	}
+
+	return 0;
+}
+
+static unsigned char
+analogix_dp_get_adjust_request_voltage(u8 adjust_request[2], int lane)
+{
+	int shift = (lane & 1) * 4;
+	u8 link_value = adjust_request[lane >> 1];
+
+	return (link_value >> shift) & 0x3;
+}
+
+static unsigned char analogix_dp_get_adjust_request_pre_emphasis(
+					u8 adjust_request[2],
+					int lane)
+{
+	int shift = (lane & 1) * 4;
+	u8 link_value = adjust_request[lane >> 1];
+
+	return ((link_value >> shift) & 0xc) >> 2;
+}
+
+static void analogix_dp_set_lane_link_training(struct analogix_dp_device *dp,
+					       u8 training_lane_set, int lane)
+{
+	switch (lane) {
+	case 0:
+		analogix_dp_set_lane0_link_training(dp, training_lane_set);
+		break;
+	case 1:
+		analogix_dp_set_lane1_link_training(dp, training_lane_set);
+		break;
+
+	case 2:
+		analogix_dp_set_lane2_link_training(dp, training_lane_set);
+		break;
+
+	case 3:
+		analogix_dp_set_lane3_link_training(dp, training_lane_set);
+		break;
+	}
+}
+
+static unsigned int
+analogix_dp_get_lane_link_training(struct analogix_dp_device *dp,
+				   int lane)
+{
+	u32 reg;
+
+	switch (lane) {
+	case 0:
+		reg = analogix_dp_get_lane0_link_training(dp);
+		break;
+	case 1:
+		reg = analogix_dp_get_lane1_link_training(dp);
+		break;
+	case 2:
+		reg = analogix_dp_get_lane2_link_training(dp);
+		break;
+	case 3:
+		reg = analogix_dp_get_lane3_link_training(dp);
+		break;
+	default:
+		WARN_ON(1);
+		return 0;
+	}
+
+	return reg;
+}
+
+static void analogix_dp_reduce_link_rate(struct analogix_dp_device *dp)
+{
+	analogix_dp_training_pattern_dis(dp);
+	analogix_dp_set_enhanced_mode(dp);
+
+	dp->link_train.lt_state = FAILED;
+}
+
+static void analogix_dp_get_adjust_training_lane(struct analogix_dp_device *dp,
+						 u8 adjust_request[2])
+{
+	int lane, lane_count;
+	u8 voltage_swing, pre_emphasis, training_lane;
+
+	lane_count = dp->link_train.lane_count;
+	for (lane = 0; lane < lane_count; lane++) {
+		voltage_swing = analogix_dp_get_adjust_request_voltage(
+						adjust_request, lane);
+		pre_emphasis = analogix_dp_get_adjust_request_pre_emphasis(
+						adjust_request, lane);
+		training_lane = DPCD_VOLTAGE_SWING_SET(voltage_swing) |
+				DPCD_PRE_EMPHASIS_SET(pre_emphasis);
+
+		if (voltage_swing == VOLTAGE_LEVEL_3)
+			training_lane |= DP_TRAIN_MAX_SWING_REACHED;
+		if (pre_emphasis == PRE_EMPHASIS_LEVEL_3)
+			training_lane |= DP_TRAIN_MAX_PRE_EMPHASIS_REACHED;
+
+		dp->link_train.training_lane[lane] = training_lane;
+	}
+}
+
+static int analogix_dp_process_clock_recovery(struct analogix_dp_device *dp)
+{
+	int lane, lane_count, retval;
+	u8 voltage_swing, pre_emphasis, training_lane;
+	u8 link_status[2], adjust_request[2];
+
+	usleep_range(100, 101);
+
+	lane_count = dp->link_train.lane_count;
+
+	retval = drm_dp_dpcd_read(&dp->aux, DP_LANE0_1_STATUS, link_status, 2);
+	if (retval < 0)
+		return retval;
+
+	retval = drm_dp_dpcd_read(&dp->aux, DP_ADJUST_REQUEST_LANE0_1,
+				  adjust_request, 2);
+	if (retval < 0)
+		return retval;
+
+	if (analogix_dp_clock_recovery_ok(link_status, lane_count) == 0) {
+		/* set training pattern 2 for EQ */
+		analogix_dp_set_training_pattern(dp, TRAINING_PTN2);
+
+		retval = drm_dp_dpcd_writeb(&dp->aux, DP_TRAINING_PATTERN_SET,
+					    DP_LINK_SCRAMBLING_DISABLE |
+						DP_TRAINING_PATTERN_2);
+		if (retval < 0)
+			return retval;
+
+		dev_info(dp->dev, "Link Training Clock Recovery success\n");
+		dp->link_train.lt_state = EQUALIZER_TRAINING;
+	} else {
+		for (lane = 0; lane < lane_count; lane++) {
+			training_lane = analogix_dp_get_lane_link_training(
+							dp, lane);
+			voltage_swing = analogix_dp_get_adjust_request_voltage(
+							adjust_request, lane);
+			pre_emphasis = analogix_dp_get_adjust_request_pre_emphasis(
+							adjust_request, lane);
+
+			if (DPCD_VOLTAGE_SWING_GET(training_lane) ==
+					voltage_swing &&
+			    DPCD_PRE_EMPHASIS_GET(training_lane) ==
+					pre_emphasis)
+				dp->link_train.cr_loop[lane]++;
+
+			if (dp->link_train.cr_loop[lane] == MAX_CR_LOOP ||
+			    voltage_swing == VOLTAGE_LEVEL_3 ||
+			    pre_emphasis == PRE_EMPHASIS_LEVEL_3) {
+				dev_err(dp->dev, "CR Max reached (%d,%d,%d)\n",
+					dp->link_train.cr_loop[lane],
+					voltage_swing, pre_emphasis);
+				analogix_dp_reduce_link_rate(dp);
+				return -EIO;
+			}
+		}
+	}
+
+	analogix_dp_get_adjust_training_lane(dp, adjust_request);
+
+	for (lane = 0; lane < lane_count; lane++)
+		analogix_dp_set_lane_link_training(dp,
+			dp->link_train.training_lane[lane], lane);
+
+	retval = drm_dp_dpcd_write(&dp->aux, DP_TRAINING_LANE0_SET,
+				   dp->link_train.training_lane, lane_count);
+	if (retval < 0)
+		return retval;
+
+	return 0;
+}
+
+static int analogix_dp_process_equalizer_training(struct analogix_dp_device *dp)
+{
+	int lane, lane_count, retval;
+	u32 reg;
+	u8 link_align, link_status[2], adjust_request[2];
+
+	usleep_range(400, 401);
+
+	lane_count = dp->link_train.lane_count;
+
+	retval = drm_dp_dpcd_read(&dp->aux, DP_LANE0_1_STATUS, link_status, 2);
+	if (retval < 0)
+		return retval;
+
+	if (analogix_dp_clock_recovery_ok(link_status, lane_count)) {
+		analogix_dp_reduce_link_rate(dp);
+		return -EIO;
+	}
+
+	retval = drm_dp_dpcd_read(&dp->aux, DP_ADJUST_REQUEST_LANE0_1,
+				  adjust_request, 2);
+	if (retval < 0)
+		return retval;
+
+	retval = drm_dp_dpcd_readb(&dp->aux, DP_LANE_ALIGN_STATUS_UPDATED,
+				   &link_align);
+	if (retval < 0)
+		return retval;
+
+	analogix_dp_get_adjust_training_lane(dp, adjust_request);
+
+	if (!analogix_dp_channel_eq_ok(link_status, link_align, lane_count)) {
+		/* traing pattern Set to Normal */
+		retval = analogix_dp_training_pattern_dis(dp);
+		if (retval < 0)
+			return retval;
+
+		dev_info(dp->dev, "Link Training success!\n");
+		analogix_dp_get_link_bandwidth(dp, &reg);
+		dp->link_train.link_rate = reg;
+		dev_dbg(dp->dev, "final bandwidth = %.2x\n",
+			dp->link_train.link_rate);
+
+		analogix_dp_get_lane_count(dp, &reg);
+		dp->link_train.lane_count = reg;
+		dev_dbg(dp->dev, "final lane count = %.2x\n",
+			dp->link_train.lane_count);
+
+		dp->link_train.lt_state = FINISHED;
+
+		return 0;
+	}
+
+	/* not all locked */
+	dp->link_train.eq_loop++;
+
+	if (dp->link_train.eq_loop > MAX_EQ_LOOP) {
+		dev_err(dp->dev, "EQ Max loop\n");
+		analogix_dp_reduce_link_rate(dp);
+		return -EIO;
+	}
+
+	for (lane = 0; lane < lane_count; lane++)
+		analogix_dp_set_lane_link_training(dp,
+			dp->link_train.training_lane[lane], lane);
+
+	retval = drm_dp_dpcd_write(&dp->aux, DP_TRAINING_LANE0_SET,
+				   dp->link_train.training_lane, lane_count);
+	if (retval < 0)
+		return retval;
+
+	return 0;
+}
+
+static void analogix_dp_get_max_rx_bandwidth(struct analogix_dp_device *dp,
+					     u8 *bandwidth)
+{
+	u8 data;
+
+	/*
+	 * For DP rev.1.1, Maximum link rate of Main Link lanes
+	 * 0x06 = 1.62 Gbps, 0x0a = 2.7 Gbps
+	 * For DP rev.1.2, Maximum link rate of Main Link lanes
+	 * 0x06 = 1.62 Gbps, 0x0a = 2.7 Gbps, 0x14 = 5.4Gbps
+	 */
+	drm_dp_dpcd_readb(&dp->aux, DP_MAX_LINK_RATE, &data);
+	*bandwidth = data;
+}
+
+static void analogix_dp_get_max_rx_lane_count(struct analogix_dp_device *dp,
+					      u8 *lane_count)
+{
+	u8 data;
+
+	/*
+	 * For DP rev.1.1, Maximum number of Main Link lanes
+	 * 0x01 = 1 lane, 0x02 = 2 lanes, 0x04 = 4 lanes
+	 */
+	drm_dp_dpcd_readb(&dp->aux, DP_MAX_LANE_COUNT, &data);
+	*lane_count = DPCD_MAX_LANE_COUNT(data);
+}
+
+static int analogix_dp_full_link_train(struct analogix_dp_device *dp,
+				       u32 max_lanes, u32 max_rate)
+{
+	int retval = 0;
+	bool training_finished = false;
+
+	/*
+	 * MACRO_RST must be applied after the PLL_LOCK to avoid
+	 * the DP inter pair skew issue for at least 10 us
+	 */
+	analogix_dp_reset_macro(dp);
+
+	/* Initialize by reading RX's DPCD */
+	analogix_dp_get_max_rx_bandwidth(dp, &dp->link_train.link_rate);
+	analogix_dp_get_max_rx_lane_count(dp, &dp->link_train.lane_count);
+
+	if ((dp->link_train.link_rate != DP_LINK_BW_1_62) &&
+	    (dp->link_train.link_rate != DP_LINK_BW_2_7) &&
+	    (dp->link_train.link_rate != DP_LINK_BW_5_4)) {
+		dev_err(dp->dev, "Rx Max Link Rate is abnormal :%x !\n",
+			dp->link_train.link_rate);
+		dp->link_train.link_rate = DP_LINK_BW_1_62;
+	}
+
+	if (dp->link_train.lane_count == 0) {
+		dev_err(dp->dev, "Rx Max Lane count is abnormal :%x !\n",
+			dp->link_train.lane_count);
+		dp->link_train.lane_count = (u8)LANE_COUNT1;
+	}
+
+	/* Setup TX lane count & rate */
+	if (dp->link_train.lane_count > max_lanes)
+		dp->link_train.lane_count = max_lanes;
+	if (dp->link_train.link_rate > max_rate)
+		dp->link_train.link_rate = max_rate;
+
+	/* All DP analog module power up */
+	analogix_dp_set_analog_power_down(dp, POWER_ALL, 0);
+
+	dp->link_train.lt_state = START;
+
+	/* Process here */
+	while (!retval && !training_finished) {
+		switch (dp->link_train.lt_state) {
+		case START:
+			retval = analogix_dp_link_start(dp);
+			if (retval)
+				dev_err(dp->dev, "LT link start failed!\n");
+			break;
+		case CLOCK_RECOVERY:
+			retval = analogix_dp_process_clock_recovery(dp);
+			if (retval)
+				dev_err(dp->dev, "LT CR failed!\n");
+			break;
+		case EQUALIZER_TRAINING:
+			retval = analogix_dp_process_equalizer_training(dp);
+			if (retval)
+				dev_err(dp->dev, "LT EQ failed!\n");
+			break;
+		case FINISHED:
+			training_finished = 1;
+			break;
+		case FAILED:
+			return -EREMOTEIO;
+		}
+	}
+	if (retval)
+		dev_err(dp->dev, "eDP link training failed (%d)\n", retval);
+
+	return retval;
+}
+
+static int analogix_dp_fast_link_train(struct analogix_dp_device *dp)
+{
+	int i, ret;
+	u8 link_align, link_status[2];
+	enum pll_status status;
+
+	analogix_dp_reset_macro(dp);
+
+	analogix_dp_set_link_bandwidth(dp, dp->link_train.link_rate);
+	analogix_dp_set_lane_count(dp, dp->link_train.lane_count);
+
+	for (i = 0; i < dp->link_train.lane_count; i++) {
+		analogix_dp_set_lane_link_training(dp,
+			dp->link_train.training_lane[i], i);
+	}
+
+	ret = readx_poll_timeout(analogix_dp_get_pll_lock_status, dp, status,
+				 status != PLL_UNLOCKED, 120,
+				 120 * DP_TIMEOUT_LOOP_COUNT);
+	if (ret) {
+		DRM_DEV_ERROR(dp->dev, "Wait for pll lock failed %d\n", ret);
+		return ret;
+	}
+
+	/* source Set training pattern 1 */
+	analogix_dp_set_training_pattern(dp, TRAINING_PTN1);
+	/* From DP spec, pattern must be on-screen for a minimum 500us */
+	usleep_range(500, 600);
+
+	analogix_dp_set_training_pattern(dp, TRAINING_PTN2);
+	/* From DP spec, pattern must be on-screen for a minimum 500us */
+	usleep_range(500, 600);
+
+	/* TODO: enhanced_mode?*/
+	analogix_dp_set_training_pattern(dp, DP_NONE);
+
+	/*
+	 * Useful for debugging issues with fast link training, disable for more
+	 * speed
+	 */
+	if (verify_fast_training) {
+		ret = drm_dp_dpcd_readb(&dp->aux, DP_LANE_ALIGN_STATUS_UPDATED,
+					&link_align);
+		if (ret < 0) {
+			DRM_DEV_ERROR(dp->dev, "Read align status failed %d\n",
+				      ret);
+			return ret;
+		}
+
+		ret = drm_dp_dpcd_read(&dp->aux, DP_LANE0_1_STATUS, link_status,
+				       2);
+		if (ret < 0) {
+			DRM_DEV_ERROR(dp->dev, "Read link status failed %d\n",
+				      ret);
+			return ret;
+		}
+
+		if (analogix_dp_clock_recovery_ok(link_status,
+						  dp->link_train.lane_count)) {
+			DRM_DEV_ERROR(dp->dev, "Clock recovery failed\n");
+			analogix_dp_reduce_link_rate(dp);
+			return -EIO;
+		}
+
+		if (analogix_dp_channel_eq_ok(link_status, link_align,
+					      dp->link_train.lane_count)) {
+			DRM_DEV_ERROR(dp->dev, "Channel EQ failed\n");
+			analogix_dp_reduce_link_rate(dp);
+			return -EIO;
+		}
+	}
+
+	return 0;
+}
+
+static int analogix_dp_train_link(struct analogix_dp_device *dp)
+{
+	if (dp->fast_train_enable)
+		return analogix_dp_fast_link_train(dp);
+
+	return analogix_dp_full_link_train(dp, dp->video_info.max_lane_count,
+					   dp->video_info.max_link_rate);
+}
+
+static int analogix_dp_config_video(struct analogix_dp_device *dp)
+{
+	int timeout_loop = 0;
+	int done_count = 0;
+
+	analogix_dp_config_video_slave_mode(dp);
+
+	analogix_dp_set_video_color_format(dp);
+
+	if (analogix_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) {
+		dev_err(dp->dev, "PLL is not locked yet.\n");
+		return -EINVAL;
+	}
+
+	for (;;) {
+		timeout_loop++;
+		if (analogix_dp_is_slave_video_stream_clock_on(dp) == 0)
+			break;
+		if (timeout_loop > DP_TIMEOUT_LOOP_COUNT) {
+			dev_err(dp->dev, "Timeout of slave video streamclk ok\n");
+			return -ETIMEDOUT;
+		}
+		usleep_range(1000, 1001);
+	}
+
+	/* Set to use the register calculated M/N video */
+	analogix_dp_set_video_cr_mn(dp, CALCULATED_M, 0, 0);
+
+	/* For video bist, Video timing must be generated by register */
+	analogix_dp_set_video_timing_mode(dp, VIDEO_TIMING_FROM_CAPTURE);
+
+	/* Disable video mute */
+	analogix_dp_enable_video_mute(dp, 0);
+
+	/* Configure video slave mode */
+	analogix_dp_enable_video_master(dp, 0);
+
+	/* Enable video */
+	analogix_dp_start_video(dp);
+
+	timeout_loop = 0;
+
+	for (;;) {
+		timeout_loop++;
+		if (analogix_dp_is_video_stream_on(dp) == 0) {
+			done_count++;
+			if (done_count > 10)
+				break;
+		} else if (done_count) {
+			done_count = 0;
+		}
+		if (timeout_loop > DP_TIMEOUT_LOOP_COUNT) {
+			dev_warn(dp->dev,
+				 "Ignoring timeout of video streamclk ok\n");
+			break;
+		}
+
+		usleep_range(1000, 1001);
+	}
+
+	return 0;
+}
+
+static int analogix_dp_enable_scramble(struct analogix_dp_device *dp,
+				       bool enable)
+{
+	u8 data;
+	int ret;
+
+	if (enable) {
+		analogix_dp_enable_scrambling(dp);
+
+		ret = drm_dp_dpcd_readb(&dp->aux, DP_TRAINING_PATTERN_SET,
+					&data);
+		if (ret != 1)
+			return ret;
+		ret = drm_dp_dpcd_writeb(&dp->aux, DP_TRAINING_PATTERN_SET,
+				   (u8)(data & ~DP_LINK_SCRAMBLING_DISABLE));
+	} else {
+		analogix_dp_disable_scrambling(dp);
+
+		ret = drm_dp_dpcd_readb(&dp->aux, DP_TRAINING_PATTERN_SET,
+					&data);
+		if (ret != 1)
+			return ret;
+		ret = drm_dp_dpcd_writeb(&dp->aux, DP_TRAINING_PATTERN_SET,
+				   (u8)(data | DP_LINK_SCRAMBLING_DISABLE));
+	}
+	return ret < 0 ? ret : 0;
+}
+
+static irqreturn_t analogix_dp_hardirq(int irq, void *arg)
+{
+	struct analogix_dp_device *dp = arg;
+	irqreturn_t ret = IRQ_NONE;
+	enum dp_irq_type irq_type;
+
+	irq_type = analogix_dp_get_irq_type(dp);
+	if (irq_type != DP_IRQ_TYPE_UNKNOWN) {
+		analogix_dp_mute_hpd_interrupt(dp);
+		ret = IRQ_WAKE_THREAD;
+	}
+
+	return ret;
+}
+
+static irqreturn_t analogix_dp_irq_thread(int irq, void *arg)
+{
+	struct analogix_dp_device *dp = arg;
+	enum dp_irq_type irq_type;
+
+	irq_type = analogix_dp_get_irq_type(dp);
+	if (irq_type & DP_IRQ_TYPE_HP_CABLE_IN ||
+	    irq_type & DP_IRQ_TYPE_HP_CABLE_OUT) {
+		dev_dbg(dp->dev, "Detected cable status changed!\n");
+		if (dp->drm_dev)
+			drm_helper_hpd_irq_event(dp->drm_dev);
+	}
+
+	if (irq_type != DP_IRQ_TYPE_UNKNOWN) {
+		analogix_dp_clear_hotplug_interrupts(dp);
+		analogix_dp_unmute_hpd_interrupt(dp);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int analogix_dp_fast_link_train_detection(struct analogix_dp_device *dp)
+{
+	int ret;
+	u8 spread;
+
+	ret = drm_dp_dpcd_readb(&dp->aux, DP_MAX_DOWNSPREAD, &spread);
+	if (ret != 1) {
+		dev_err(dp->dev, "failed to read downspread %d\n", ret);
+		return ret;
+	}
+	dp->fast_train_enable = !!(spread & DP_NO_AUX_HANDSHAKE_LINK_TRAINING);
+	dev_dbg(dp->dev, "fast link training %s\n",
+		dp->fast_train_enable ? "supported" : "unsupported");
+	return 0;
+}
+
+static int analogix_dp_commit(struct analogix_dp_device *dp)
+{
+	int ret;
+
+	/* Keep the panel disabled while we configure video */
+	if (dp->plat_data->panel) {
+		if (drm_panel_disable(dp->plat_data->panel))
+			DRM_ERROR("failed to disable the panel\n");
+	}
+
+	ret = analogix_dp_train_link(dp);
+	if (ret) {
+		dev_err(dp->dev, "unable to do link train, ret=%d\n", ret);
+		return ret;
+	}
+
+	ret = analogix_dp_enable_scramble(dp, 1);
+	if (ret < 0) {
+		dev_err(dp->dev, "can not enable scramble\n");
+		return ret;
+	}
+
+	analogix_dp_init_video(dp);
+	ret = analogix_dp_config_video(dp);
+	if (ret) {
+		dev_err(dp->dev, "unable to config video\n");
+		return ret;
+	}
+
+	/* Safe to enable the panel now */
+	if (dp->plat_data->panel) {
+		ret = drm_panel_enable(dp->plat_data->panel);
+		if (ret) {
+			DRM_ERROR("failed to enable the panel\n");
+			return ret;
+		}
+	}
+
+	ret = analogix_dp_detect_sink_psr(dp);
+	if (ret)
+		return ret;
+
+	/* Check whether panel supports fast training */
+	ret = analogix_dp_fast_link_train_detection(dp);
+	if (ret)
+		dp->psr_enable = false;
+
+	if (dp->psr_enable) {
+		ret = analogix_dp_enable_sink_psr(dp);
+		if (ret)
+			return ret;
+	}
+
+
+	return ret;
+}
+
+/*
+ * This function is a bit of a catch-all for panel preparation, hopefully
+ * simplifying the logic of functions that need to prepare/unprepare the panel
+ * below.
+ *
+ * If @prepare is true, this function will prepare the panel. Conversely, if it
+ * is false, the panel will be unprepared.
+ *
+ * If @is_modeset_prepare is true, the function will disregard the current state
+ * of the panel and either prepare/unprepare the panel based on @prepare. Once
+ * it finishes, it will update dp->panel_is_modeset to reflect the current state
+ * of the panel.
+ */
+static int analogix_dp_prepare_panel(struct analogix_dp_device *dp,
+				     bool prepare, bool is_modeset_prepare)
+{
+	int ret = 0;
+
+	if (!dp->plat_data->panel)
+		return 0;
+
+	mutex_lock(&dp->panel_lock);
+
+	/*
+	 * Exit early if this is a temporary prepare/unprepare and we're already
+	 * modeset (since we neither want to prepare twice or unprepare early).
+	 */
+	if (dp->panel_is_modeset && !is_modeset_prepare)
+		goto out;
+
+	if (prepare)
+		ret = drm_panel_prepare(dp->plat_data->panel);
+	else
+		ret = drm_panel_unprepare(dp->plat_data->panel);
+
+	if (ret)
+		goto out;
+
+	if (is_modeset_prepare)
+		dp->panel_is_modeset = prepare;
+
+out:
+	mutex_unlock(&dp->panel_lock);
+	return ret;
+}
+
+static int analogix_dp_get_modes(struct drm_connector *connector)
+{
+	struct analogix_dp_device *dp = to_dp(connector);
+	struct edid *edid;
+	int ret, num_modes = 0;
+
+	if (dp->plat_data->panel) {
+		num_modes += drm_panel_get_modes(dp->plat_data->panel);
+	} else {
+		ret = analogix_dp_prepare_panel(dp, true, false);
+		if (ret) {
+			DRM_ERROR("Failed to prepare panel (%d)\n", ret);
+			return 0;
+		}
+
+		pm_runtime_get_sync(dp->dev);
+		edid = drm_get_edid(connector, &dp->aux.ddc);
+		pm_runtime_put(dp->dev);
+		if (edid) {
+			drm_connector_update_edid_property(&dp->connector,
+							   edid);
+			num_modes += drm_add_edid_modes(&dp->connector, edid);
+			kfree(edid);
+		}
+
+		ret = analogix_dp_prepare_panel(dp, false, false);
+		if (ret)
+			DRM_ERROR("Failed to unprepare panel (%d)\n", ret);
+	}
+
+	if (dp->plat_data->get_modes)
+		num_modes += dp->plat_data->get_modes(dp->plat_data, connector);
+
+	return num_modes;
+}
+
+static struct drm_encoder *
+analogix_dp_best_encoder(struct drm_connector *connector)
+{
+	struct analogix_dp_device *dp = to_dp(connector);
+
+	return dp->encoder;
+}
+
+static const struct drm_connector_helper_funcs analogix_dp_connector_helper_funcs = {
+	.get_modes = analogix_dp_get_modes,
+	.best_encoder = analogix_dp_best_encoder,
+};
+
+static enum drm_connector_status
+analogix_dp_detect(struct drm_connector *connector, bool force)
+{
+	struct analogix_dp_device *dp = to_dp(connector);
+	enum drm_connector_status status = connector_status_disconnected;
+	int ret;
+
+	if (dp->plat_data->panel)
+		return connector_status_connected;
+
+	ret = analogix_dp_prepare_panel(dp, true, false);
+	if (ret) {
+		DRM_ERROR("Failed to prepare panel (%d)\n", ret);
+		return connector_status_disconnected;
+	}
+
+	if (!analogix_dp_detect_hpd(dp))
+		status = connector_status_connected;
+
+	ret = analogix_dp_prepare_panel(dp, false, false);
+	if (ret)
+		DRM_ERROR("Failed to unprepare panel (%d)\n", ret);
+
+	return status;
+}
+
+static const struct drm_connector_funcs analogix_dp_connector_funcs = {
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.detect = analogix_dp_detect,
+	.destroy = drm_connector_cleanup,
+	.reset = drm_atomic_helper_connector_reset,
+	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static int analogix_dp_bridge_attach(struct drm_bridge *bridge)
+{
+	struct analogix_dp_device *dp = bridge->driver_private;
+	struct drm_encoder *encoder = dp->encoder;
+	struct drm_connector *connector = NULL;
+	int ret = 0;
+
+	if (!bridge->encoder) {
+		DRM_ERROR("Parent encoder object not found");
+		return -ENODEV;
+	}
+
+	if (!dp->plat_data->skip_connector) {
+		connector = &dp->connector;
+		connector->polled = DRM_CONNECTOR_POLL_HPD;
+
+		ret = drm_connector_init(dp->drm_dev, connector,
+					 &analogix_dp_connector_funcs,
+					 DRM_MODE_CONNECTOR_eDP);
+		if (ret) {
+			DRM_ERROR("Failed to initialize connector with drm\n");
+			return ret;
+		}
+
+		drm_connector_helper_add(connector,
+					 &analogix_dp_connector_helper_funcs);
+		drm_connector_attach_encoder(connector, encoder);
+	}
+
+	/*
+	 * NOTE: the connector registration is implemented in analogix
+	 * platform driver, that to say connector would be exist after
+	 * plat_data->attch return, that's why we record the connector
+	 * point after plat attached.
+	 */
+	 if (dp->plat_data->attach) {
+		 ret = dp->plat_data->attach(dp->plat_data, bridge, connector);
+		 if (ret) {
+			 DRM_ERROR("Failed at platform attch func\n");
+			 return ret;
+		 }
+	}
+
+	if (dp->plat_data->panel) {
+		ret = drm_panel_attach(dp->plat_data->panel, &dp->connector);
+		if (ret) {
+			DRM_ERROR("Failed to attach panel\n");
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static void analogix_dp_bridge_pre_enable(struct drm_bridge *bridge)
+{
+	struct analogix_dp_device *dp = bridge->driver_private;
+	int ret;
+
+	ret = analogix_dp_prepare_panel(dp, true, true);
+	if (ret)
+		DRM_ERROR("failed to setup the panel ret = %d\n", ret);
+}
+
+static int analogix_dp_set_bridge(struct analogix_dp_device *dp)
+{
+	int ret;
+
+	pm_runtime_get_sync(dp->dev);
+
+	ret = clk_prepare_enable(dp->clock);
+	if (ret < 0) {
+		DRM_ERROR("Failed to prepare_enable the clock clk [%d]\n", ret);
+		goto out_dp_clk_pre;
+	}
+
+	if (dp->plat_data->power_on_start)
+		dp->plat_data->power_on_start(dp->plat_data);
+
+	phy_power_on(dp->phy);
+
+	ret = analogix_dp_init_dp(dp);
+	if (ret)
+		goto out_dp_init;
+
+	/*
+	 * According to DP spec v1.3 chap 3.5.1.2 Link Training,
+	 * We should first make sure the HPD signal is asserted high by device
+	 * when we want to establish a link with it.
+	 */
+	ret = analogix_dp_detect_hpd(dp);
+	if (ret) {
+		DRM_ERROR("failed to get hpd single ret = %d\n", ret);
+		goto out_dp_init;
+	}
+
+	ret = analogix_dp_commit(dp);
+	if (ret) {
+		DRM_ERROR("dp commit error, ret = %d\n", ret);
+		goto out_dp_init;
+	}
+
+	if (dp->plat_data->power_on_end)
+		dp->plat_data->power_on_end(dp->plat_data);
+
+	enable_irq(dp->irq);
+	return 0;
+
+out_dp_init:
+	phy_power_off(dp->phy);
+	if (dp->plat_data->power_off)
+		dp->plat_data->power_off(dp->plat_data);
+	clk_disable_unprepare(dp->clock);
+out_dp_clk_pre:
+	pm_runtime_put_sync(dp->dev);
+
+	return ret;
+}
+
+static void analogix_dp_bridge_enable(struct drm_bridge *bridge)
+{
+	struct analogix_dp_device *dp = bridge->driver_private;
+	int timeout_loop = 0;
+
+	if (dp->dpms_mode == DRM_MODE_DPMS_ON)
+		return;
+
+	while (timeout_loop < MAX_PLL_LOCK_LOOP) {
+		if (analogix_dp_set_bridge(dp) == 0) {
+			dp->dpms_mode = DRM_MODE_DPMS_ON;
+			return;
+		}
+		dev_err(dp->dev, "failed to set bridge, retry: %d\n",
+			timeout_loop);
+		timeout_loop++;
+		usleep_range(10, 11);
+	}
+	dev_err(dp->dev, "too many times retry set bridge, give it up\n");
+}
+
+static void analogix_dp_bridge_disable(struct drm_bridge *bridge)
+{
+	struct analogix_dp_device *dp = bridge->driver_private;
+	int ret;
+
+	if (dp->dpms_mode != DRM_MODE_DPMS_ON)
+		return;
+
+	if (dp->plat_data->panel) {
+		if (drm_panel_disable(dp->plat_data->panel)) {
+			DRM_ERROR("failed to disable the panel\n");
+			return;
+		}
+	}
+
+	disable_irq(dp->irq);
+
+	if (dp->plat_data->power_off)
+		dp->plat_data->power_off(dp->plat_data);
+
+	analogix_dp_set_analog_power_down(dp, POWER_ALL, 1);
+	phy_power_off(dp->phy);
+
+	clk_disable_unprepare(dp->clock);
+
+	pm_runtime_put_sync(dp->dev);
+
+	ret = analogix_dp_prepare_panel(dp, false, true);
+	if (ret)
+		DRM_ERROR("failed to setup the panel ret = %d\n", ret);
+
+	dp->psr_enable = false;
+	dp->fast_train_enable = false;
+	dp->dpms_mode = DRM_MODE_DPMS_OFF;
+}
+
+static void analogix_dp_bridge_mode_set(struct drm_bridge *bridge,
+					struct drm_display_mode *orig_mode,
+					struct drm_display_mode *mode)
+{
+	struct analogix_dp_device *dp = bridge->driver_private;
+	struct drm_display_info *display_info = &dp->connector.display_info;
+	struct video_info *video = &dp->video_info;
+	struct device_node *dp_node = dp->dev->of_node;
+	int vic;
+
+	/* Input video interlaces & hsync pol & vsync pol */
+	video->interlaced = !!(mode->flags & DRM_MODE_FLAG_INTERLACE);
+	video->v_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NVSYNC);
+	video->h_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NHSYNC);
+
+	/* Input video dynamic_range & colorimetry */
+	vic = drm_match_cea_mode(mode);
+	if ((vic == 6) || (vic == 7) || (vic == 21) || (vic == 22) ||
+	    (vic == 2) || (vic == 3) || (vic == 17) || (vic == 18)) {
+		video->dynamic_range = CEA;
+		video->ycbcr_coeff = COLOR_YCBCR601;
+	} else if (vic) {
+		video->dynamic_range = CEA;
+		video->ycbcr_coeff = COLOR_YCBCR709;
+	} else {
+		video->dynamic_range = VESA;
+		video->ycbcr_coeff = COLOR_YCBCR709;
+	}
+
+	/* Input vide bpc and color_formats */
+	switch (display_info->bpc) {
+	case 12:
+		video->color_depth = COLOR_12;
+		break;
+	case 10:
+		video->color_depth = COLOR_10;
+		break;
+	case 8:
+		video->color_depth = COLOR_8;
+		break;
+	case 6:
+		video->color_depth = COLOR_6;
+		break;
+	default:
+		video->color_depth = COLOR_8;
+		break;
+	}
+	if (display_info->color_formats & DRM_COLOR_FORMAT_YCRCB444)
+		video->color_space = COLOR_YCBCR444;
+	else if (display_info->color_formats & DRM_COLOR_FORMAT_YCRCB422)
+		video->color_space = COLOR_YCBCR422;
+	else if (display_info->color_formats & DRM_COLOR_FORMAT_RGB444)
+		video->color_space = COLOR_RGB;
+	else
+		video->color_space = COLOR_RGB;
+
+	/*
+	 * NOTE: those property parsing code is used for providing backward
+	 * compatibility for samsung platform.
+	 * Due to we used the "of_property_read_u32" interfaces, when this
+	 * property isn't present, the "video_info" can keep the original
+	 * values and wouldn't be modified.
+	 */
+	of_property_read_u32(dp_node, "samsung,color-space",
+			     &video->color_space);
+	of_property_read_u32(dp_node, "samsung,dynamic-range",
+			     &video->dynamic_range);
+	of_property_read_u32(dp_node, "samsung,ycbcr-coeff",
+			     &video->ycbcr_coeff);
+	of_property_read_u32(dp_node, "samsung,color-depth",
+			     &video->color_depth);
+	if (of_property_read_bool(dp_node, "hsync-active-high"))
+		video->h_sync_polarity = true;
+	if (of_property_read_bool(dp_node, "vsync-active-high"))
+		video->v_sync_polarity = true;
+	if (of_property_read_bool(dp_node, "interlaced"))
+		video->interlaced = true;
+}
+
+static void analogix_dp_bridge_nop(struct drm_bridge *bridge)
+{
+	/* do nothing */
+}
+
+static const struct drm_bridge_funcs analogix_dp_bridge_funcs = {
+	.pre_enable = analogix_dp_bridge_pre_enable,
+	.enable = analogix_dp_bridge_enable,
+	.disable = analogix_dp_bridge_disable,
+	.post_disable = analogix_dp_bridge_nop,
+	.mode_set = analogix_dp_bridge_mode_set,
+	.attach = analogix_dp_bridge_attach,
+};
+
+static int analogix_dp_create_bridge(struct drm_device *drm_dev,
+				     struct analogix_dp_device *dp)
+{
+	struct drm_bridge *bridge;
+	int ret;
+
+	bridge = devm_kzalloc(drm_dev->dev, sizeof(*bridge), GFP_KERNEL);
+	if (!bridge) {
+		DRM_ERROR("failed to allocate for drm bridge\n");
+		return -ENOMEM;
+	}
+
+	dp->bridge = bridge;
+
+	bridge->driver_private = dp;
+	bridge->funcs = &analogix_dp_bridge_funcs;
+
+	ret = drm_bridge_attach(dp->encoder, bridge, NULL);
+	if (ret) {
+		DRM_ERROR("failed to attach drm bridge\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int analogix_dp_dt_parse_pdata(struct analogix_dp_device *dp)
+{
+	struct device_node *dp_node = dp->dev->of_node;
+	struct video_info *video_info = &dp->video_info;
+
+	switch (dp->plat_data->dev_type) {
+	case RK3288_DP:
+	case RK3399_EDP:
+		/*
+		 * Like Rk3288 DisplayPort TRM indicate that "Main link
+		 * containing 4 physical lanes of 2.7/1.62 Gbps/lane".
+		 */
+		video_info->max_link_rate = 0x0A;
+		video_info->max_lane_count = 0x04;
+		break;
+	case EXYNOS_DP:
+		/*
+		 * NOTE: those property parseing code is used for
+		 * providing backward compatibility for samsung platform.
+		 */
+		of_property_read_u32(dp_node, "samsung,link-rate",
+				     &video_info->max_link_rate);
+		of_property_read_u32(dp_node, "samsung,lane-count",
+				     &video_info->max_lane_count);
+		break;
+	}
+
+	return 0;
+}
+
+static ssize_t analogix_dpaux_transfer(struct drm_dp_aux *aux,
+				       struct drm_dp_aux_msg *msg)
+{
+	struct analogix_dp_device *dp = to_dp(aux);
+	int ret;
+
+	pm_runtime_get_sync(dp->dev);
+
+	ret = analogix_dp_detect_hpd(dp);
+	if (ret)
+		goto out;
+
+	ret = analogix_dp_transfer(dp, msg);
+out:
+	pm_runtime_put(dp->dev);
+
+	return ret;
+}
+
+struct analogix_dp_device *
+analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,
+		 struct analogix_dp_plat_data *plat_data)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct analogix_dp_device *dp;
+	struct resource *res;
+	unsigned int irq_flags;
+	int ret;
+
+	if (!plat_data) {
+		dev_err(dev, "Invalided input plat_data\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	dp = devm_kzalloc(dev, sizeof(struct analogix_dp_device), GFP_KERNEL);
+	if (!dp)
+		return ERR_PTR(-ENOMEM);
+
+	dp->dev = &pdev->dev;
+	dp->dpms_mode = DRM_MODE_DPMS_OFF;
+
+	mutex_init(&dp->panel_lock);
+	dp->panel_is_modeset = false;
+
+	/*
+	 * platform dp driver need containor_of the plat_data to get
+	 * the driver private data, so we need to store the point of
+	 * plat_data, not the context of plat_data.
+	 */
+	dp->plat_data = plat_data;
+
+	ret = analogix_dp_dt_parse_pdata(dp);
+	if (ret)
+		return ERR_PTR(ret);
+
+	dp->phy = devm_phy_get(dp->dev, "dp");
+	if (IS_ERR(dp->phy)) {
+		dev_err(dp->dev, "no DP phy configured\n");
+		ret = PTR_ERR(dp->phy);
+		if (ret) {
+			/*
+			 * phy itself is not enabled, so we can move forward
+			 * assigning NULL to phy pointer.
+			 */
+			if (ret == -ENOSYS || ret == -ENODEV)
+				dp->phy = NULL;
+			else
+				return ERR_PTR(ret);
+		}
+	}
+
+	dp->clock = devm_clk_get(&pdev->dev, "dp");
+	if (IS_ERR(dp->clock)) {
+		dev_err(&pdev->dev, "failed to get clock\n");
+		return ERR_CAST(dp->clock);
+	}
+
+	clk_prepare_enable(dp->clock);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	dp->reg_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(dp->reg_base))
+		return ERR_CAST(dp->reg_base);
+
+	dp->force_hpd = of_property_read_bool(dev->of_node, "force-hpd");
+
+	dp->hpd_gpio = of_get_named_gpio(dev->of_node, "hpd-gpios", 0);
+	if (!gpio_is_valid(dp->hpd_gpio))
+		dp->hpd_gpio = of_get_named_gpio(dev->of_node,
+						 "samsung,hpd-gpio", 0);
+
+	if (gpio_is_valid(dp->hpd_gpio)) {
+		/*
+		 * Set up the hotplug GPIO from the device tree as an interrupt.
+		 * Simply specifying a different interrupt in the device tree
+		 * doesn't work since we handle hotplug rather differently when
+		 * using a GPIO.  We also need the actual GPIO specifier so
+		 * that we can get the current state of the GPIO.
+		 */
+		ret = devm_gpio_request_one(&pdev->dev, dp->hpd_gpio, GPIOF_IN,
+					    "hpd_gpio");
+		if (ret) {
+			dev_err(&pdev->dev, "failed to get hpd gpio\n");
+			return ERR_PTR(ret);
+		}
+		dp->irq = gpio_to_irq(dp->hpd_gpio);
+		irq_flags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING;
+	} else {
+		dp->hpd_gpio = -ENODEV;
+		dp->irq = platform_get_irq(pdev, 0);
+		irq_flags = 0;
+	}
+
+	if (dp->irq == -ENXIO) {
+		dev_err(&pdev->dev, "failed to get irq\n");
+		return ERR_PTR(-ENODEV);
+	}
+
+	ret = devm_request_threaded_irq(&pdev->dev, dp->irq,
+					analogix_dp_hardirq,
+					analogix_dp_irq_thread,
+					irq_flags, "analogix-dp", dp);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to request irq\n");
+		goto err_disable_pm_runtime;
+	}
+	disable_irq(dp->irq);
+
+	dp->drm_dev = drm_dev;
+	dp->encoder = dp->plat_data->encoder;
+
+	dp->aux.name = "DP-AUX";
+	dp->aux.transfer = analogix_dpaux_transfer;
+	dp->aux.dev = &pdev->dev;
+
+	ret = drm_dp_aux_register(&dp->aux);
+	if (ret)
+		return ERR_PTR(ret);
+
+	pm_runtime_enable(dev);
+
+	ret = analogix_dp_create_bridge(drm_dev, dp);
+	if (ret) {
+		DRM_ERROR("failed to create bridge (%d)\n", ret);
+		goto err_disable_pm_runtime;
+	}
+
+	return dp;
+
+err_disable_pm_runtime:
+
+	pm_runtime_disable(dev);
+
+	return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(analogix_dp_bind);
+
+void analogix_dp_unbind(struct analogix_dp_device *dp)
+{
+	analogix_dp_bridge_disable(dp->bridge);
+	dp->connector.funcs->destroy(&dp->connector);
+
+	if (dp->plat_data->panel) {
+		if (drm_panel_unprepare(dp->plat_data->panel))
+			DRM_ERROR("failed to turnoff the panel\n");
+		if (drm_panel_detach(dp->plat_data->panel))
+			DRM_ERROR("failed to detach the panel\n");
+	}
+
+	drm_dp_aux_unregister(&dp->aux);
+	pm_runtime_disable(dp->dev);
+	clk_disable_unprepare(dp->clock);
+}
+EXPORT_SYMBOL_GPL(analogix_dp_unbind);
+
+#ifdef CONFIG_PM
+int analogix_dp_suspend(struct analogix_dp_device *dp)
+{
+	clk_disable_unprepare(dp->clock);
+
+	if (dp->plat_data->panel) {
+		if (drm_panel_unprepare(dp->plat_data->panel))
+			DRM_ERROR("failed to turnoff the panel\n");
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(analogix_dp_suspend);
+
+int analogix_dp_resume(struct analogix_dp_device *dp)
+{
+	int ret;
+
+	ret = clk_prepare_enable(dp->clock);
+	if (ret < 0) {
+		DRM_ERROR("Failed to prepare_enable the clock clk [%d]\n", ret);
+		return ret;
+	}
+
+	if (dp->plat_data->panel) {
+		if (drm_panel_prepare(dp->plat_data->panel)) {
+			DRM_ERROR("failed to setup the panel\n");
+			return -EBUSY;
+		}
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(analogix_dp_resume);
+#endif
+
+int analogix_dp_start_crc(struct drm_connector *connector)
+{
+	struct analogix_dp_device *dp = to_dp(connector);
+
+	if (!connector->state->crtc) {
+		DRM_ERROR("Connector %s doesn't currently have a CRTC.\n",
+			  connector->name);
+		return -EINVAL;
+	}
+
+	return drm_dp_start_crc(&dp->aux, connector->state->crtc);
+}
+EXPORT_SYMBOL_GPL(analogix_dp_start_crc);
+
+int analogix_dp_stop_crc(struct drm_connector *connector)
+{
+	struct analogix_dp_device *dp = to_dp(connector);
+
+	return drm_dp_stop_crc(&dp->aux);
+}
+EXPORT_SYMBOL_GPL(analogix_dp_stop_crc);
+
+MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>");
+MODULE_DESCRIPTION("Analogix DP Core Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
new file mode 100644
index 000000000..769255dc6
--- /dev/null
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
@@ -0,0 +1,261 @@
+/*
+ * Header file for Analogix DP (Display Port) core interface driver.
+ *
+ * Copyright (C) 2012 Samsung Electronics Co., Ltd.
+ * Author: Jingoo Han <jg1.han@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef _ANALOGIX_DP_CORE_H
+#define _ANALOGIX_DP_CORE_H
+
+#include <drm/drm_crtc.h>
+#include <drm/drm_dp_helper.h>
+
+#define DP_TIMEOUT_LOOP_COUNT 100
+#define MAX_CR_LOOP 5
+#define MAX_EQ_LOOP 5
+#define MAX_PLL_LOCK_LOOP 5
+
+/* Training takes 22ms if AUX channel comm fails. Use this as retry interval */
+#define DP_TIMEOUT_TRAINING_US			22000
+#define DP_TIMEOUT_PSR_LOOP_MS			300
+
+/* DP_MAX_LANE_COUNT */
+#define DPCD_ENHANCED_FRAME_CAP(x)		(((x) >> 7) & 0x1)
+#define DPCD_MAX_LANE_COUNT(x)			((x) & 0x1f)
+
+/* DP_LANE_COUNT_SET */
+#define DPCD_LANE_COUNT_SET(x)			((x) & 0x1f)
+
+/* DP_TRAINING_LANE0_SET */
+#define DPCD_PRE_EMPHASIS_SET(x)		(((x) & 0x3) << 3)
+#define DPCD_PRE_EMPHASIS_GET(x)		(((x) >> 3) & 0x3)
+#define DPCD_VOLTAGE_SWING_SET(x)		(((x) & 0x3) << 0)
+#define DPCD_VOLTAGE_SWING_GET(x)		(((x) >> 0) & 0x3)
+
+enum link_lane_count_type {
+	LANE_COUNT1 = 1,
+	LANE_COUNT2 = 2,
+	LANE_COUNT4 = 4
+};
+
+enum link_training_state {
+	START,
+	CLOCK_RECOVERY,
+	EQUALIZER_TRAINING,
+	FINISHED,
+	FAILED
+};
+
+enum voltage_swing_level {
+	VOLTAGE_LEVEL_0,
+	VOLTAGE_LEVEL_1,
+	VOLTAGE_LEVEL_2,
+	VOLTAGE_LEVEL_3,
+};
+
+enum pre_emphasis_level {
+	PRE_EMPHASIS_LEVEL_0,
+	PRE_EMPHASIS_LEVEL_1,
+	PRE_EMPHASIS_LEVEL_2,
+	PRE_EMPHASIS_LEVEL_3,
+};
+
+enum pattern_set {
+	PRBS7,
+	D10_2,
+	TRAINING_PTN1,
+	TRAINING_PTN2,
+	DP_NONE
+};
+
+enum color_space {
+	COLOR_RGB,
+	COLOR_YCBCR422,
+	COLOR_YCBCR444
+};
+
+enum color_depth {
+	COLOR_6,
+	COLOR_8,
+	COLOR_10,
+	COLOR_12
+};
+
+enum color_coefficient {
+	COLOR_YCBCR601,
+	COLOR_YCBCR709
+};
+
+enum dynamic_range {
+	VESA,
+	CEA
+};
+
+enum pll_status {
+	PLL_UNLOCKED,
+	PLL_LOCKED
+};
+
+enum clock_recovery_m_value_type {
+	CALCULATED_M,
+	REGISTER_M
+};
+
+enum video_timing_recognition_type {
+	VIDEO_TIMING_FROM_CAPTURE,
+	VIDEO_TIMING_FROM_REGISTER
+};
+
+enum analog_power_block {
+	AUX_BLOCK,
+	CH0_BLOCK,
+	CH1_BLOCK,
+	CH2_BLOCK,
+	CH3_BLOCK,
+	ANALOG_TOTAL,
+	POWER_ALL
+};
+
+enum dp_irq_type {
+	DP_IRQ_TYPE_HP_CABLE_IN  = BIT(0),
+	DP_IRQ_TYPE_HP_CABLE_OUT = BIT(1),
+	DP_IRQ_TYPE_HP_CHANGE    = BIT(2),
+	DP_IRQ_TYPE_UNKNOWN      = BIT(3),
+};
+
+struct video_info {
+	char *name;
+
+	bool h_sync_polarity;
+	bool v_sync_polarity;
+	bool interlaced;
+
+	enum color_space color_space;
+	enum dynamic_range dynamic_range;
+	enum color_coefficient ycbcr_coeff;
+	enum color_depth color_depth;
+
+	int max_link_rate;
+	enum link_lane_count_type max_lane_count;
+};
+
+struct link_train {
+	int eq_loop;
+	int cr_loop[4];
+
+	u8 link_rate;
+	u8 lane_count;
+	u8 training_lane[4];
+
+	enum link_training_state lt_state;
+};
+
+struct analogix_dp_device {
+	struct drm_encoder	*encoder;
+	struct device		*dev;
+	struct drm_device	*drm_dev;
+	struct drm_connector	connector;
+	struct drm_bridge	*bridge;
+	struct drm_dp_aux       aux;
+	struct clk		*clock;
+	unsigned int		irq;
+	void __iomem		*reg_base;
+
+	struct video_info	video_info;
+	struct link_train	link_train;
+	struct phy		*phy;
+	int			dpms_mode;
+	int			hpd_gpio;
+	bool                    force_hpd;
+	bool			psr_enable;
+	bool			fast_train_enable;
+
+	struct mutex		panel_lock;
+	bool			panel_is_modeset;
+
+	struct analogix_dp_plat_data *plat_data;
+};
+
+/* analogix_dp_reg.c */
+void analogix_dp_enable_video_mute(struct analogix_dp_device *dp, bool enable);
+void analogix_dp_stop_video(struct analogix_dp_device *dp);
+void analogix_dp_lane_swap(struct analogix_dp_device *dp, bool enable);
+void analogix_dp_init_analog_param(struct analogix_dp_device *dp);
+void analogix_dp_init_interrupt(struct analogix_dp_device *dp);
+void analogix_dp_reset(struct analogix_dp_device *dp);
+void analogix_dp_swreset(struct analogix_dp_device *dp);
+void analogix_dp_config_interrupt(struct analogix_dp_device *dp);
+void analogix_dp_mute_hpd_interrupt(struct analogix_dp_device *dp);
+void analogix_dp_unmute_hpd_interrupt(struct analogix_dp_device *dp);
+enum pll_status analogix_dp_get_pll_lock_status(struct analogix_dp_device *dp);
+void analogix_dp_set_pll_power_down(struct analogix_dp_device *dp, bool enable);
+void analogix_dp_set_analog_power_down(struct analogix_dp_device *dp,
+				       enum analog_power_block block,
+				       bool enable);
+int analogix_dp_init_analog_func(struct analogix_dp_device *dp);
+void analogix_dp_init_hpd(struct analogix_dp_device *dp);
+void analogix_dp_force_hpd(struct analogix_dp_device *dp);
+enum dp_irq_type analogix_dp_get_irq_type(struct analogix_dp_device *dp);
+void analogix_dp_clear_hotplug_interrupts(struct analogix_dp_device *dp);
+void analogix_dp_reset_aux(struct analogix_dp_device *dp);
+void analogix_dp_init_aux(struct analogix_dp_device *dp);
+int analogix_dp_get_plug_in_status(struct analogix_dp_device *dp);
+void analogix_dp_enable_sw_function(struct analogix_dp_device *dp);
+void analogix_dp_set_link_bandwidth(struct analogix_dp_device *dp, u32 bwtype);
+void analogix_dp_get_link_bandwidth(struct analogix_dp_device *dp, u32 *bwtype);
+void analogix_dp_set_lane_count(struct analogix_dp_device *dp, u32 count);
+void analogix_dp_get_lane_count(struct analogix_dp_device *dp, u32 *count);
+void analogix_dp_enable_enhanced_mode(struct analogix_dp_device *dp,
+				      bool enable);
+void analogix_dp_set_training_pattern(struct analogix_dp_device *dp,
+				      enum pattern_set pattern);
+void analogix_dp_set_lane0_pre_emphasis(struct analogix_dp_device *dp,
+					u32 level);
+void analogix_dp_set_lane1_pre_emphasis(struct analogix_dp_device *dp,
+					u32 level);
+void analogix_dp_set_lane2_pre_emphasis(struct analogix_dp_device *dp,
+					u32 level);
+void analogix_dp_set_lane3_pre_emphasis(struct analogix_dp_device *dp,
+					u32 level);
+void analogix_dp_set_lane0_link_training(struct analogix_dp_device *dp,
+					 u32 training_lane);
+void analogix_dp_set_lane1_link_training(struct analogix_dp_device *dp,
+					 u32 training_lane);
+void analogix_dp_set_lane2_link_training(struct analogix_dp_device *dp,
+					 u32 training_lane);
+void analogix_dp_set_lane3_link_training(struct analogix_dp_device *dp,
+					 u32 training_lane);
+u32 analogix_dp_get_lane0_link_training(struct analogix_dp_device *dp);
+u32 analogix_dp_get_lane1_link_training(struct analogix_dp_device *dp);
+u32 analogix_dp_get_lane2_link_training(struct analogix_dp_device *dp);
+u32 analogix_dp_get_lane3_link_training(struct analogix_dp_device *dp);
+void analogix_dp_reset_macro(struct analogix_dp_device *dp);
+void analogix_dp_init_video(struct analogix_dp_device *dp);
+
+void analogix_dp_set_video_color_format(struct analogix_dp_device *dp);
+int analogix_dp_is_slave_video_stream_clock_on(struct analogix_dp_device *dp);
+void analogix_dp_set_video_cr_mn(struct analogix_dp_device *dp,
+				 enum clock_recovery_m_value_type type,
+				 u32 m_value,
+				 u32 n_value);
+void analogix_dp_set_video_timing_mode(struct analogix_dp_device *dp, u32 type);
+void analogix_dp_enable_video_master(struct analogix_dp_device *dp,
+				     bool enable);
+void analogix_dp_start_video(struct analogix_dp_device *dp);
+int analogix_dp_is_video_stream_on(struct analogix_dp_device *dp);
+void analogix_dp_config_video_slave_mode(struct analogix_dp_device *dp);
+void analogix_dp_enable_scrambling(struct analogix_dp_device *dp);
+void analogix_dp_disable_scrambling(struct analogix_dp_device *dp);
+void analogix_dp_enable_psr_crc(struct analogix_dp_device *dp);
+int analogix_dp_send_psr_spd(struct analogix_dp_device *dp,
+			     struct edp_vsc_psr *vsc, bool blocking);
+ssize_t analogix_dp_transfer(struct analogix_dp_device *dp,
+			     struct drm_dp_aux_msg *msg);
+
+#endif /* _ANALOGIX_DP_CORE_H */
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
new file mode 100644
index 000000000..a5f2763d7
--- /dev/null
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
@@ -0,0 +1,1236 @@
+/*
+ * Analogix DP (Display port) core register interface driver.
+ *
+ * Copyright (C) 2012 Samsung Electronics Co., Ltd.
+ * Author: Jingoo Han <jg1.han@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+
+#include <drm/bridge/analogix_dp.h>
+
+#include "analogix_dp_core.h"
+#include "analogix_dp_reg.h"
+
+#define COMMON_INT_MASK_1	0
+#define COMMON_INT_MASK_2	0
+#define COMMON_INT_MASK_3	0
+#define COMMON_INT_MASK_4	(HOTPLUG_CHG | HPD_LOST | PLUG)
+#define INT_STA_MASK		INT_HPD
+
+void analogix_dp_enable_video_mute(struct analogix_dp_device *dp, bool enable)
+{
+	u32 reg;
+
+	if (enable) {
+		reg = readl(dp->reg_base + ANALOGIX_DP_VIDEO_CTL_1);
+		reg |= HDCP_VIDEO_MUTE;
+		writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_1);
+	} else {
+		reg = readl(dp->reg_base + ANALOGIX_DP_VIDEO_CTL_1);
+		reg &= ~HDCP_VIDEO_MUTE;
+		writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_1);
+	}
+}
+
+void analogix_dp_stop_video(struct analogix_dp_device *dp)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_VIDEO_CTL_1);
+	reg &= ~VIDEO_EN;
+	writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_1);
+}
+
+void analogix_dp_lane_swap(struct analogix_dp_device *dp, bool enable)
+{
+	u32 reg;
+
+	if (enable)
+		reg = LANE3_MAP_LOGIC_LANE_0 | LANE2_MAP_LOGIC_LANE_1 |
+		      LANE1_MAP_LOGIC_LANE_2 | LANE0_MAP_LOGIC_LANE_3;
+	else
+		reg = LANE3_MAP_LOGIC_LANE_3 | LANE2_MAP_LOGIC_LANE_2 |
+		      LANE1_MAP_LOGIC_LANE_1 | LANE0_MAP_LOGIC_LANE_0;
+
+	writel(reg, dp->reg_base + ANALOGIX_DP_LANE_MAP);
+}
+
+void analogix_dp_init_analog_param(struct analogix_dp_device *dp)
+{
+	u32 reg;
+
+	reg = TX_TERMINAL_CTRL_50_OHM;
+	writel(reg, dp->reg_base + ANALOGIX_DP_ANALOG_CTL_1);
+
+	reg = SEL_24M | TX_DVDD_BIT_1_0625V;
+	writel(reg, dp->reg_base + ANALOGIX_DP_ANALOG_CTL_2);
+
+	if (dp->plat_data && is_rockchip(dp->plat_data->dev_type)) {
+		reg = REF_CLK_24M;
+		if (dp->plat_data->dev_type == RK3288_DP)
+			reg ^= REF_CLK_MASK;
+
+		writel(reg, dp->reg_base + ANALOGIX_DP_PLL_REG_1);
+		writel(0x95, dp->reg_base + ANALOGIX_DP_PLL_REG_2);
+		writel(0x40, dp->reg_base + ANALOGIX_DP_PLL_REG_3);
+		writel(0x58, dp->reg_base + ANALOGIX_DP_PLL_REG_4);
+		writel(0x22, dp->reg_base + ANALOGIX_DP_PLL_REG_5);
+	}
+
+	reg = DRIVE_DVDD_BIT_1_0625V | VCO_BIT_600_MICRO;
+	writel(reg, dp->reg_base + ANALOGIX_DP_ANALOG_CTL_3);
+
+	reg = PD_RING_OSC | AUX_TERMINAL_CTRL_50_OHM |
+		TX_CUR1_2X | TX_CUR_16_MA;
+	writel(reg, dp->reg_base + ANALOGIX_DP_PLL_FILTER_CTL_1);
+
+	reg = CH3_AMP_400_MV | CH2_AMP_400_MV |
+		CH1_AMP_400_MV | CH0_AMP_400_MV;
+	writel(reg, dp->reg_base + ANALOGIX_DP_TX_AMP_TUNING_CTL);
+}
+
+void analogix_dp_init_interrupt(struct analogix_dp_device *dp)
+{
+	/* Set interrupt pin assertion polarity as high */
+	writel(INT_POL1 | INT_POL0, dp->reg_base + ANALOGIX_DP_INT_CTL);
+
+	/* Clear pending regisers */
+	writel(0xff, dp->reg_base + ANALOGIX_DP_COMMON_INT_STA_1);
+	writel(0x4f, dp->reg_base + ANALOGIX_DP_COMMON_INT_STA_2);
+	writel(0xe0, dp->reg_base + ANALOGIX_DP_COMMON_INT_STA_3);
+	writel(0xe7, dp->reg_base + ANALOGIX_DP_COMMON_INT_STA_4);
+	writel(0x63, dp->reg_base + ANALOGIX_DP_INT_STA);
+
+	/* 0:mask,1: unmask */
+	writel(0x00, dp->reg_base + ANALOGIX_DP_COMMON_INT_MASK_1);
+	writel(0x00, dp->reg_base + ANALOGIX_DP_COMMON_INT_MASK_2);
+	writel(0x00, dp->reg_base + ANALOGIX_DP_COMMON_INT_MASK_3);
+	writel(0x00, dp->reg_base + ANALOGIX_DP_COMMON_INT_MASK_4);
+	writel(0x00, dp->reg_base + ANALOGIX_DP_INT_STA_MASK);
+}
+
+void analogix_dp_reset(struct analogix_dp_device *dp)
+{
+	u32 reg;
+
+	analogix_dp_stop_video(dp);
+	analogix_dp_enable_video_mute(dp, 0);
+
+	if (dp->plat_data && is_rockchip(dp->plat_data->dev_type))
+		reg = RK_VID_CAP_FUNC_EN_N | RK_VID_FIFO_FUNC_EN_N |
+			SW_FUNC_EN_N;
+	else
+		reg = MASTER_VID_FUNC_EN_N | SLAVE_VID_FUNC_EN_N |
+			AUD_FIFO_FUNC_EN_N | AUD_FUNC_EN_N |
+			HDCP_FUNC_EN_N | SW_FUNC_EN_N;
+
+	writel(reg, dp->reg_base + ANALOGIX_DP_FUNC_EN_1);
+
+	reg = SSC_FUNC_EN_N | AUX_FUNC_EN_N |
+		SERDES_FIFO_FUNC_EN_N |
+		LS_CLK_DOMAIN_FUNC_EN_N;
+	writel(reg, dp->reg_base + ANALOGIX_DP_FUNC_EN_2);
+
+	usleep_range(20, 30);
+
+	analogix_dp_lane_swap(dp, 0);
+
+	writel(0x0, dp->reg_base + ANALOGIX_DP_SYS_CTL_1);
+	writel(0x40, dp->reg_base + ANALOGIX_DP_SYS_CTL_2);
+	writel(0x0, dp->reg_base + ANALOGIX_DP_SYS_CTL_3);
+	writel(0x0, dp->reg_base + ANALOGIX_DP_SYS_CTL_4);
+
+	writel(0x0, dp->reg_base + ANALOGIX_DP_PKT_SEND_CTL);
+	writel(0x0, dp->reg_base + ANALOGIX_DP_HDCP_CTL);
+
+	writel(0x5e, dp->reg_base + ANALOGIX_DP_HPD_DEGLITCH_L);
+	writel(0x1a, dp->reg_base + ANALOGIX_DP_HPD_DEGLITCH_H);
+
+	writel(0x10, dp->reg_base + ANALOGIX_DP_LINK_DEBUG_CTL);
+
+	writel(0x0, dp->reg_base + ANALOGIX_DP_PHY_TEST);
+
+	writel(0x0, dp->reg_base + ANALOGIX_DP_VIDEO_FIFO_THRD);
+	writel(0x20, dp->reg_base + ANALOGIX_DP_AUDIO_MARGIN);
+
+	writel(0x4, dp->reg_base + ANALOGIX_DP_M_VID_GEN_FILTER_TH);
+	writel(0x2, dp->reg_base + ANALOGIX_DP_M_AUD_GEN_FILTER_TH);
+
+	writel(0x00000101, dp->reg_base + ANALOGIX_DP_SOC_GENERAL_CTL);
+}
+
+void analogix_dp_swreset(struct analogix_dp_device *dp)
+{
+	writel(RESET_DP_TX, dp->reg_base + ANALOGIX_DP_TX_SW_RESET);
+}
+
+void analogix_dp_config_interrupt(struct analogix_dp_device *dp)
+{
+	u32 reg;
+
+	/* 0: mask, 1: unmask */
+	reg = COMMON_INT_MASK_1;
+	writel(reg, dp->reg_base + ANALOGIX_DP_COMMON_INT_MASK_1);
+
+	reg = COMMON_INT_MASK_2;
+	writel(reg, dp->reg_base + ANALOGIX_DP_COMMON_INT_MASK_2);
+
+	reg = COMMON_INT_MASK_3;
+	writel(reg, dp->reg_base + ANALOGIX_DP_COMMON_INT_MASK_3);
+
+	reg = COMMON_INT_MASK_4;
+	writel(reg, dp->reg_base + ANALOGIX_DP_COMMON_INT_MASK_4);
+
+	reg = INT_STA_MASK;
+	writel(reg, dp->reg_base + ANALOGIX_DP_INT_STA_MASK);
+}
+
+void analogix_dp_mute_hpd_interrupt(struct analogix_dp_device *dp)
+{
+	u32 reg;
+
+	/* 0: mask, 1: unmask */
+	reg = readl(dp->reg_base + ANALOGIX_DP_COMMON_INT_MASK_4);
+	reg &= ~COMMON_INT_MASK_4;
+	writel(reg, dp->reg_base + ANALOGIX_DP_COMMON_INT_MASK_4);
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_INT_STA_MASK);
+	reg &= ~INT_STA_MASK;
+	writel(reg, dp->reg_base + ANALOGIX_DP_INT_STA_MASK);
+}
+
+void analogix_dp_unmute_hpd_interrupt(struct analogix_dp_device *dp)
+{
+	u32 reg;
+
+	/* 0: mask, 1: unmask */
+	reg = COMMON_INT_MASK_4;
+	writel(reg, dp->reg_base + ANALOGIX_DP_COMMON_INT_MASK_4);
+
+	reg = INT_STA_MASK;
+	writel(reg, dp->reg_base + ANALOGIX_DP_INT_STA_MASK);
+}
+
+enum pll_status analogix_dp_get_pll_lock_status(struct analogix_dp_device *dp)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_DEBUG_CTL);
+	if (reg & PLL_LOCK)
+		return PLL_LOCKED;
+	else
+		return PLL_UNLOCKED;
+}
+
+void analogix_dp_set_pll_power_down(struct analogix_dp_device *dp, bool enable)
+{
+	u32 reg;
+	u32 mask = DP_PLL_PD;
+	u32 pd_addr = ANALOGIX_DP_PLL_CTL;
+
+	if (dp->plat_data && is_rockchip(dp->plat_data->dev_type)) {
+		pd_addr = ANALOGIX_DP_PD;
+		mask = RK_PLL_PD;
+	}
+
+	reg = readl(dp->reg_base + pd_addr);
+	if (enable)
+		reg |= mask;
+	else
+		reg &= ~mask;
+	writel(reg, dp->reg_base + pd_addr);
+}
+
+void analogix_dp_set_analog_power_down(struct analogix_dp_device *dp,
+				       enum analog_power_block block,
+				       bool enable)
+{
+	u32 reg;
+	u32 phy_pd_addr = ANALOGIX_DP_PHY_PD;
+	u32 mask;
+
+	if (dp->plat_data && is_rockchip(dp->plat_data->dev_type))
+		phy_pd_addr = ANALOGIX_DP_PD;
+
+	switch (block) {
+	case AUX_BLOCK:
+		if (dp->plat_data && is_rockchip(dp->plat_data->dev_type))
+			mask = RK_AUX_PD;
+		else
+			mask = AUX_PD;
+
+		reg = readl(dp->reg_base + phy_pd_addr);
+		if (enable)
+			reg |= mask;
+		else
+			reg &= ~mask;
+		writel(reg, dp->reg_base + phy_pd_addr);
+		break;
+	case CH0_BLOCK:
+		mask = CH0_PD;
+		reg = readl(dp->reg_base + phy_pd_addr);
+
+		if (enable)
+			reg |= mask;
+		else
+			reg &= ~mask;
+		writel(reg, dp->reg_base + phy_pd_addr);
+		break;
+	case CH1_BLOCK:
+		mask = CH1_PD;
+		reg = readl(dp->reg_base + phy_pd_addr);
+
+		if (enable)
+			reg |= mask;
+		else
+			reg &= ~mask;
+		writel(reg, dp->reg_base + phy_pd_addr);
+		break;
+	case CH2_BLOCK:
+		mask = CH2_PD;
+		reg = readl(dp->reg_base + phy_pd_addr);
+
+		if (enable)
+			reg |= mask;
+		else
+			reg &= ~mask;
+		writel(reg, dp->reg_base + phy_pd_addr);
+		break;
+	case CH3_BLOCK:
+		mask = CH3_PD;
+		reg = readl(dp->reg_base + phy_pd_addr);
+
+		if (enable)
+			reg |= mask;
+		else
+			reg &= ~mask;
+		writel(reg, dp->reg_base + phy_pd_addr);
+		break;
+	case ANALOG_TOTAL:
+		/*
+		 * There is no bit named DP_PHY_PD, so We used DP_INC_BG
+		 * to power off everything instead of DP_PHY_PD in
+		 * Rockchip
+		 */
+		if (dp->plat_data && is_rockchip(dp->plat_data->dev_type))
+			mask = DP_INC_BG;
+		else
+			mask = DP_PHY_PD;
+
+		reg = readl(dp->reg_base + phy_pd_addr);
+		if (enable)
+			reg |= mask;
+		else
+			reg &= ~mask;
+
+		writel(reg, dp->reg_base + phy_pd_addr);
+		if (dp->plat_data && is_rockchip(dp->plat_data->dev_type))
+			usleep_range(10, 15);
+		break;
+	case POWER_ALL:
+		if (enable) {
+			reg = DP_ALL_PD;
+			writel(reg, dp->reg_base + phy_pd_addr);
+		} else {
+			reg = DP_ALL_PD;
+			writel(reg, dp->reg_base + phy_pd_addr);
+			usleep_range(10, 15);
+			reg &= ~DP_INC_BG;
+			writel(reg, dp->reg_base + phy_pd_addr);
+			usleep_range(10, 15);
+
+			writel(0x00, dp->reg_base + phy_pd_addr);
+		}
+		break;
+	default:
+		break;
+	}
+}
+
+int analogix_dp_init_analog_func(struct analogix_dp_device *dp)
+{
+	u32 reg;
+	int timeout_loop = 0;
+
+	analogix_dp_set_analog_power_down(dp, POWER_ALL, 0);
+
+	reg = PLL_LOCK_CHG;
+	writel(reg, dp->reg_base + ANALOGIX_DP_COMMON_INT_STA_1);
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_DEBUG_CTL);
+	reg &= ~(F_PLL_LOCK | PLL_LOCK_CTRL);
+	writel(reg, dp->reg_base + ANALOGIX_DP_DEBUG_CTL);
+
+	/* Power up PLL */
+	if (analogix_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) {
+		analogix_dp_set_pll_power_down(dp, 0);
+
+		while (analogix_dp_get_pll_lock_status(dp) == PLL_UNLOCKED) {
+			timeout_loop++;
+			if (DP_TIMEOUT_LOOP_COUNT < timeout_loop) {
+				dev_err(dp->dev, "failed to get pll lock status\n");
+				return -ETIMEDOUT;
+			}
+			usleep_range(10, 20);
+		}
+	}
+
+	/* Enable Serdes FIFO function and Link symbol clock domain module */
+	reg = readl(dp->reg_base + ANALOGIX_DP_FUNC_EN_2);
+	reg &= ~(SERDES_FIFO_FUNC_EN_N | LS_CLK_DOMAIN_FUNC_EN_N
+		| AUX_FUNC_EN_N);
+	writel(reg, dp->reg_base + ANALOGIX_DP_FUNC_EN_2);
+	return 0;
+}
+
+void analogix_dp_clear_hotplug_interrupts(struct analogix_dp_device *dp)
+{
+	u32 reg;
+
+	if (gpio_is_valid(dp->hpd_gpio))
+		return;
+
+	reg = HOTPLUG_CHG | HPD_LOST | PLUG;
+	writel(reg, dp->reg_base + ANALOGIX_DP_COMMON_INT_STA_4);
+
+	reg = INT_HPD;
+	writel(reg, dp->reg_base + ANALOGIX_DP_INT_STA);
+}
+
+void analogix_dp_init_hpd(struct analogix_dp_device *dp)
+{
+	u32 reg;
+
+	if (gpio_is_valid(dp->hpd_gpio))
+		return;
+
+	analogix_dp_clear_hotplug_interrupts(dp);
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_SYS_CTL_3);
+	reg &= ~(F_HPD | HPD_CTRL);
+	writel(reg, dp->reg_base + ANALOGIX_DP_SYS_CTL_3);
+}
+
+void analogix_dp_force_hpd(struct analogix_dp_device *dp)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_SYS_CTL_3);
+	reg = (F_HPD | HPD_CTRL);
+	writel(reg, dp->reg_base + ANALOGIX_DP_SYS_CTL_3);
+}
+
+enum dp_irq_type analogix_dp_get_irq_type(struct analogix_dp_device *dp)
+{
+	u32 reg;
+
+	if (gpio_is_valid(dp->hpd_gpio)) {
+		reg = gpio_get_value(dp->hpd_gpio);
+		if (reg)
+			return DP_IRQ_TYPE_HP_CABLE_IN;
+		else
+			return DP_IRQ_TYPE_HP_CABLE_OUT;
+	} else {
+		/* Parse hotplug interrupt status register */
+		reg = readl(dp->reg_base + ANALOGIX_DP_COMMON_INT_STA_4);
+
+		if (reg & PLUG)
+			return DP_IRQ_TYPE_HP_CABLE_IN;
+
+		if (reg & HPD_LOST)
+			return DP_IRQ_TYPE_HP_CABLE_OUT;
+
+		if (reg & HOTPLUG_CHG)
+			return DP_IRQ_TYPE_HP_CHANGE;
+
+		return DP_IRQ_TYPE_UNKNOWN;
+	}
+}
+
+void analogix_dp_reset_aux(struct analogix_dp_device *dp)
+{
+	u32 reg;
+
+	/* Disable AUX channel module */
+	reg = readl(dp->reg_base + ANALOGIX_DP_FUNC_EN_2);
+	reg |= AUX_FUNC_EN_N;
+	writel(reg, dp->reg_base + ANALOGIX_DP_FUNC_EN_2);
+}
+
+void analogix_dp_init_aux(struct analogix_dp_device *dp)
+{
+	u32 reg;
+
+	/* Clear inerrupts related to AUX channel */
+	reg = RPLY_RECEIV | AUX_ERR;
+	writel(reg, dp->reg_base + ANALOGIX_DP_INT_STA);
+
+	analogix_dp_set_analog_power_down(dp, AUX_BLOCK, true);
+	usleep_range(10, 11);
+	analogix_dp_set_analog_power_down(dp, AUX_BLOCK, false);
+
+	analogix_dp_reset_aux(dp);
+
+	/* AUX_BIT_PERIOD_EXPECTED_DELAY doesn't apply to Rockchip IP */
+	if (dp->plat_data && is_rockchip(dp->plat_data->dev_type))
+		reg = 0;
+	else
+		reg = AUX_BIT_PERIOD_EXPECTED_DELAY(3);
+
+	/* Disable AUX transaction H/W retry */
+	reg |= AUX_HW_RETRY_COUNT_SEL(0) |
+	       AUX_HW_RETRY_INTERVAL_600_MICROSECONDS;
+
+	writel(reg, dp->reg_base + ANALOGIX_DP_AUX_HW_RETRY_CTL);
+
+	/* Receive AUX Channel DEFER commands equal to DEFFER_COUNT*64 */
+	reg = DEFER_CTRL_EN | DEFER_COUNT(1);
+	writel(reg, dp->reg_base + ANALOGIX_DP_AUX_CH_DEFER_CTL);
+
+	/* Enable AUX channel module */
+	reg = readl(dp->reg_base + ANALOGIX_DP_FUNC_EN_2);
+	reg &= ~AUX_FUNC_EN_N;
+	writel(reg, dp->reg_base + ANALOGIX_DP_FUNC_EN_2);
+}
+
+int analogix_dp_get_plug_in_status(struct analogix_dp_device *dp)
+{
+	u32 reg;
+
+	if (gpio_is_valid(dp->hpd_gpio)) {
+		if (gpio_get_value(dp->hpd_gpio))
+			return 0;
+	} else {
+		reg = readl(dp->reg_base + ANALOGIX_DP_SYS_CTL_3);
+		if (reg & HPD_STATUS)
+			return 0;
+	}
+
+	return -EINVAL;
+}
+
+void analogix_dp_enable_sw_function(struct analogix_dp_device *dp)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_FUNC_EN_1);
+	reg &= ~SW_FUNC_EN_N;
+	writel(reg, dp->reg_base + ANALOGIX_DP_FUNC_EN_1);
+}
+
+int analogix_dp_start_aux_transaction(struct analogix_dp_device *dp)
+{
+	int reg;
+	int retval = 0;
+	int timeout_loop = 0;
+
+	/* Enable AUX CH operation */
+	reg = readl(dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_2);
+	reg |= AUX_EN;
+	writel(reg, dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_2);
+
+	/* Is AUX CH command reply received? */
+	reg = readl(dp->reg_base + ANALOGIX_DP_INT_STA);
+	while (!(reg & RPLY_RECEIV)) {
+		timeout_loop++;
+		if (DP_TIMEOUT_LOOP_COUNT < timeout_loop) {
+			dev_err(dp->dev, "AUX CH command reply failed!\n");
+			return -ETIMEDOUT;
+		}
+		reg = readl(dp->reg_base + ANALOGIX_DP_INT_STA);
+		usleep_range(10, 11);
+	}
+
+	/* Clear interrupt source for AUX CH command reply */
+	writel(RPLY_RECEIV, dp->reg_base + ANALOGIX_DP_INT_STA);
+
+	/* Clear interrupt source for AUX CH access error */
+	reg = readl(dp->reg_base + ANALOGIX_DP_INT_STA);
+	if (reg & AUX_ERR) {
+		writel(AUX_ERR, dp->reg_base + ANALOGIX_DP_INT_STA);
+		return -EREMOTEIO;
+	}
+
+	/* Check AUX CH error access status */
+	reg = readl(dp->reg_base + ANALOGIX_DP_AUX_CH_STA);
+	if ((reg & AUX_STATUS_MASK) != 0) {
+		dev_err(dp->dev, "AUX CH error happens: %d\n\n",
+			reg & AUX_STATUS_MASK);
+		return -EREMOTEIO;
+	}
+
+	return retval;
+}
+
+int analogix_dp_write_byte_to_dpcd(struct analogix_dp_device *dp,
+				   unsigned int reg_addr,
+				   unsigned char data)
+{
+	u32 reg;
+	int i;
+	int retval;
+
+	for (i = 0; i < 3; i++) {
+		/* Clear AUX CH data buffer */
+		reg = BUF_CLR;
+		writel(reg, dp->reg_base + ANALOGIX_DP_BUFFER_DATA_CTL);
+
+		/* Select DPCD device address */
+		reg = AUX_ADDR_7_0(reg_addr);
+		writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_7_0);
+		reg = AUX_ADDR_15_8(reg_addr);
+		writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_15_8);
+		reg = AUX_ADDR_19_16(reg_addr);
+		writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_19_16);
+
+		/* Write data buffer */
+		reg = (unsigned int)data;
+		writel(reg, dp->reg_base + ANALOGIX_DP_BUF_DATA_0);
+
+		/*
+		 * Set DisplayPort transaction and write 1 byte
+		 * If bit 3 is 1, DisplayPort transaction.
+		 * If Bit 3 is 0, I2C transaction.
+		 */
+		reg = AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_WRITE;
+		writel(reg, dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_1);
+
+		/* Start AUX transaction */
+		retval = analogix_dp_start_aux_transaction(dp);
+		if (retval == 0)
+			break;
+
+		dev_dbg(dp->dev, "%s: Aux Transaction fail!\n", __func__);
+	}
+
+	return retval;
+}
+
+void analogix_dp_set_link_bandwidth(struct analogix_dp_device *dp, u32 bwtype)
+{
+	u32 reg;
+
+	reg = bwtype;
+	if ((bwtype == DP_LINK_BW_2_7) || (bwtype == DP_LINK_BW_1_62))
+		writel(reg, dp->reg_base + ANALOGIX_DP_LINK_BW_SET);
+}
+
+void analogix_dp_get_link_bandwidth(struct analogix_dp_device *dp, u32 *bwtype)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_LINK_BW_SET);
+	*bwtype = reg;
+}
+
+void analogix_dp_set_lane_count(struct analogix_dp_device *dp, u32 count)
+{
+	u32 reg;
+
+	reg = count;
+	writel(reg, dp->reg_base + ANALOGIX_DP_LANE_COUNT_SET);
+}
+
+void analogix_dp_get_lane_count(struct analogix_dp_device *dp, u32 *count)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_LANE_COUNT_SET);
+	*count = reg;
+}
+
+void analogix_dp_enable_enhanced_mode(struct analogix_dp_device *dp,
+				      bool enable)
+{
+	u32 reg;
+
+	if (enable) {
+		reg = readl(dp->reg_base + ANALOGIX_DP_SYS_CTL_4);
+		reg |= ENHANCED;
+		writel(reg, dp->reg_base + ANALOGIX_DP_SYS_CTL_4);
+	} else {
+		reg = readl(dp->reg_base + ANALOGIX_DP_SYS_CTL_4);
+		reg &= ~ENHANCED;
+		writel(reg, dp->reg_base + ANALOGIX_DP_SYS_CTL_4);
+	}
+}
+
+void analogix_dp_set_training_pattern(struct analogix_dp_device *dp,
+				      enum pattern_set pattern)
+{
+	u32 reg;
+
+	switch (pattern) {
+	case PRBS7:
+		reg = SCRAMBLING_ENABLE | LINK_QUAL_PATTERN_SET_PRBS7;
+		writel(reg, dp->reg_base + ANALOGIX_DP_TRAINING_PTN_SET);
+		break;
+	case D10_2:
+		reg = SCRAMBLING_ENABLE | LINK_QUAL_PATTERN_SET_D10_2;
+		writel(reg, dp->reg_base + ANALOGIX_DP_TRAINING_PTN_SET);
+		break;
+	case TRAINING_PTN1:
+		reg = SCRAMBLING_DISABLE | SW_TRAINING_PATTERN_SET_PTN1;
+		writel(reg, dp->reg_base + ANALOGIX_DP_TRAINING_PTN_SET);
+		break;
+	case TRAINING_PTN2:
+		reg = SCRAMBLING_DISABLE | SW_TRAINING_PATTERN_SET_PTN2;
+		writel(reg, dp->reg_base + ANALOGIX_DP_TRAINING_PTN_SET);
+		break;
+	case DP_NONE:
+		reg = SCRAMBLING_ENABLE |
+			LINK_QUAL_PATTERN_SET_DISABLE |
+			SW_TRAINING_PATTERN_SET_NORMAL;
+		writel(reg, dp->reg_base + ANALOGIX_DP_TRAINING_PTN_SET);
+		break;
+	default:
+		break;
+	}
+}
+
+void analogix_dp_set_lane0_pre_emphasis(struct analogix_dp_device *dp,
+					u32 level)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_LN0_LINK_TRAINING_CTL);
+	reg &= ~PRE_EMPHASIS_SET_MASK;
+	reg |= level << PRE_EMPHASIS_SET_SHIFT;
+	writel(reg, dp->reg_base + ANALOGIX_DP_LN0_LINK_TRAINING_CTL);
+}
+
+void analogix_dp_set_lane1_pre_emphasis(struct analogix_dp_device *dp,
+					u32 level)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_LN1_LINK_TRAINING_CTL);
+	reg &= ~PRE_EMPHASIS_SET_MASK;
+	reg |= level << PRE_EMPHASIS_SET_SHIFT;
+	writel(reg, dp->reg_base + ANALOGIX_DP_LN1_LINK_TRAINING_CTL);
+}
+
+void analogix_dp_set_lane2_pre_emphasis(struct analogix_dp_device *dp,
+					u32 level)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_LN2_LINK_TRAINING_CTL);
+	reg &= ~PRE_EMPHASIS_SET_MASK;
+	reg |= level << PRE_EMPHASIS_SET_SHIFT;
+	writel(reg, dp->reg_base + ANALOGIX_DP_LN2_LINK_TRAINING_CTL);
+}
+
+void analogix_dp_set_lane3_pre_emphasis(struct analogix_dp_device *dp,
+					u32 level)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_LN3_LINK_TRAINING_CTL);
+	reg &= ~PRE_EMPHASIS_SET_MASK;
+	reg |= level << PRE_EMPHASIS_SET_SHIFT;
+	writel(reg, dp->reg_base + ANALOGIX_DP_LN3_LINK_TRAINING_CTL);
+}
+
+void analogix_dp_set_lane0_link_training(struct analogix_dp_device *dp,
+					 u32 training_lane)
+{
+	u32 reg;
+
+	reg = training_lane;
+	writel(reg, dp->reg_base + ANALOGIX_DP_LN0_LINK_TRAINING_CTL);
+}
+
+void analogix_dp_set_lane1_link_training(struct analogix_dp_device *dp,
+					 u32 training_lane)
+{
+	u32 reg;
+
+	reg = training_lane;
+	writel(reg, dp->reg_base + ANALOGIX_DP_LN1_LINK_TRAINING_CTL);
+}
+
+void analogix_dp_set_lane2_link_training(struct analogix_dp_device *dp,
+					 u32 training_lane)
+{
+	u32 reg;
+
+	reg = training_lane;
+	writel(reg, dp->reg_base + ANALOGIX_DP_LN2_LINK_TRAINING_CTL);
+}
+
+void analogix_dp_set_lane3_link_training(struct analogix_dp_device *dp,
+					 u32 training_lane)
+{
+	u32 reg;
+
+	reg = training_lane;
+	writel(reg, dp->reg_base + ANALOGIX_DP_LN3_LINK_TRAINING_CTL);
+}
+
+u32 analogix_dp_get_lane0_link_training(struct analogix_dp_device *dp)
+{
+	return readl(dp->reg_base + ANALOGIX_DP_LN0_LINK_TRAINING_CTL);
+}
+
+u32 analogix_dp_get_lane1_link_training(struct analogix_dp_device *dp)
+{
+	return readl(dp->reg_base + ANALOGIX_DP_LN1_LINK_TRAINING_CTL);
+}
+
+u32 analogix_dp_get_lane2_link_training(struct analogix_dp_device *dp)
+{
+	return readl(dp->reg_base + ANALOGIX_DP_LN2_LINK_TRAINING_CTL);
+}
+
+u32 analogix_dp_get_lane3_link_training(struct analogix_dp_device *dp)
+{
+	return readl(dp->reg_base + ANALOGIX_DP_LN3_LINK_TRAINING_CTL);
+}
+
+void analogix_dp_reset_macro(struct analogix_dp_device *dp)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_PHY_TEST);
+	reg |= MACRO_RST;
+	writel(reg, dp->reg_base + ANALOGIX_DP_PHY_TEST);
+
+	/* 10 us is the minimum reset time. */
+	usleep_range(10, 20);
+
+	reg &= ~MACRO_RST;
+	writel(reg, dp->reg_base + ANALOGIX_DP_PHY_TEST);
+}
+
+void analogix_dp_init_video(struct analogix_dp_device *dp)
+{
+	u32 reg;
+
+	reg = VSYNC_DET | VID_FORMAT_CHG | VID_CLK_CHG;
+	writel(reg, dp->reg_base + ANALOGIX_DP_COMMON_INT_STA_1);
+
+	reg = 0x0;
+	writel(reg, dp->reg_base + ANALOGIX_DP_SYS_CTL_1);
+
+	reg = CHA_CRI(4) | CHA_CTRL;
+	writel(reg, dp->reg_base + ANALOGIX_DP_SYS_CTL_2);
+
+	reg = 0x0;
+	writel(reg, dp->reg_base + ANALOGIX_DP_SYS_CTL_3);
+
+	reg = VID_HRES_TH(2) | VID_VRES_TH(0);
+	writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_8);
+}
+
+void analogix_dp_set_video_color_format(struct analogix_dp_device *dp)
+{
+	u32 reg;
+
+	/* Configure the input color depth, color space, dynamic range */
+	reg = (dp->video_info.dynamic_range << IN_D_RANGE_SHIFT) |
+		(dp->video_info.color_depth << IN_BPC_SHIFT) |
+		(dp->video_info.color_space << IN_COLOR_F_SHIFT);
+	writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_2);
+
+	/* Set Input Color YCbCr Coefficients to ITU601 or ITU709 */
+	reg = readl(dp->reg_base + ANALOGIX_DP_VIDEO_CTL_3);
+	reg &= ~IN_YC_COEFFI_MASK;
+	if (dp->video_info.ycbcr_coeff)
+		reg |= IN_YC_COEFFI_ITU709;
+	else
+		reg |= IN_YC_COEFFI_ITU601;
+	writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_3);
+}
+
+int analogix_dp_is_slave_video_stream_clock_on(struct analogix_dp_device *dp)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_SYS_CTL_1);
+	writel(reg, dp->reg_base + ANALOGIX_DP_SYS_CTL_1);
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_SYS_CTL_1);
+
+	if (!(reg & DET_STA)) {
+		dev_dbg(dp->dev, "Input stream clock not detected.\n");
+		return -EINVAL;
+	}
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_SYS_CTL_2);
+	writel(reg, dp->reg_base + ANALOGIX_DP_SYS_CTL_2);
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_SYS_CTL_2);
+	dev_dbg(dp->dev, "wait SYS_CTL_2.\n");
+
+	if (reg & CHA_STA) {
+		dev_dbg(dp->dev, "Input stream clk is changing\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+void analogix_dp_set_video_cr_mn(struct analogix_dp_device *dp,
+				 enum clock_recovery_m_value_type type,
+				 u32 m_value, u32 n_value)
+{
+	u32 reg;
+
+	if (type == REGISTER_M) {
+		reg = readl(dp->reg_base + ANALOGIX_DP_SYS_CTL_4);
+		reg |= FIX_M_VID;
+		writel(reg, dp->reg_base + ANALOGIX_DP_SYS_CTL_4);
+		reg = m_value & 0xff;
+		writel(reg, dp->reg_base + ANALOGIX_DP_M_VID_0);
+		reg = (m_value >> 8) & 0xff;
+		writel(reg, dp->reg_base + ANALOGIX_DP_M_VID_1);
+		reg = (m_value >> 16) & 0xff;
+		writel(reg, dp->reg_base + ANALOGIX_DP_M_VID_2);
+
+		reg = n_value & 0xff;
+		writel(reg, dp->reg_base + ANALOGIX_DP_N_VID_0);
+		reg = (n_value >> 8) & 0xff;
+		writel(reg, dp->reg_base + ANALOGIX_DP_N_VID_1);
+		reg = (n_value >> 16) & 0xff;
+		writel(reg, dp->reg_base + ANALOGIX_DP_N_VID_2);
+	} else  {
+		reg = readl(dp->reg_base + ANALOGIX_DP_SYS_CTL_4);
+		reg &= ~FIX_M_VID;
+		writel(reg, dp->reg_base + ANALOGIX_DP_SYS_CTL_4);
+
+		writel(0x00, dp->reg_base + ANALOGIX_DP_N_VID_0);
+		writel(0x80, dp->reg_base + ANALOGIX_DP_N_VID_1);
+		writel(0x00, dp->reg_base + ANALOGIX_DP_N_VID_2);
+	}
+}
+
+void analogix_dp_set_video_timing_mode(struct analogix_dp_device *dp, u32 type)
+{
+	u32 reg;
+
+	if (type == VIDEO_TIMING_FROM_CAPTURE) {
+		reg = readl(dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
+		reg &= ~FORMAT_SEL;
+		writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
+	} else {
+		reg = readl(dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
+		reg |= FORMAT_SEL;
+		writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
+	}
+}
+
+void analogix_dp_enable_video_master(struct analogix_dp_device *dp, bool enable)
+{
+	u32 reg;
+
+	if (enable) {
+		reg = readl(dp->reg_base + ANALOGIX_DP_SOC_GENERAL_CTL);
+		reg &= ~VIDEO_MODE_MASK;
+		reg |= VIDEO_MASTER_MODE_EN | VIDEO_MODE_MASTER_MODE;
+		writel(reg, dp->reg_base + ANALOGIX_DP_SOC_GENERAL_CTL);
+	} else {
+		reg = readl(dp->reg_base + ANALOGIX_DP_SOC_GENERAL_CTL);
+		reg &= ~VIDEO_MODE_MASK;
+		reg |= VIDEO_MODE_SLAVE_MODE;
+		writel(reg, dp->reg_base + ANALOGIX_DP_SOC_GENERAL_CTL);
+	}
+}
+
+void analogix_dp_start_video(struct analogix_dp_device *dp)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_VIDEO_CTL_1);
+	reg |= VIDEO_EN;
+	writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_1);
+}
+
+int analogix_dp_is_video_stream_on(struct analogix_dp_device *dp)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_SYS_CTL_3);
+	writel(reg, dp->reg_base + ANALOGIX_DP_SYS_CTL_3);
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_SYS_CTL_3);
+	if (!(reg & STRM_VALID)) {
+		dev_dbg(dp->dev, "Input video stream is not detected.\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+void analogix_dp_config_video_slave_mode(struct analogix_dp_device *dp)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_FUNC_EN_1);
+	if (dp->plat_data && is_rockchip(dp->plat_data->dev_type)) {
+		reg &= ~(RK_VID_CAP_FUNC_EN_N | RK_VID_FIFO_FUNC_EN_N);
+	} else {
+		reg &= ~(MASTER_VID_FUNC_EN_N | SLAVE_VID_FUNC_EN_N);
+		reg |= MASTER_VID_FUNC_EN_N;
+	}
+	writel(reg, dp->reg_base + ANALOGIX_DP_FUNC_EN_1);
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
+	reg &= ~INTERACE_SCAN_CFG;
+	reg |= (dp->video_info.interlaced << 2);
+	writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
+	reg &= ~VSYNC_POLARITY_CFG;
+	reg |= (dp->video_info.v_sync_polarity << 1);
+	writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
+	reg &= ~HSYNC_POLARITY_CFG;
+	reg |= (dp->video_info.h_sync_polarity << 0);
+	writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
+
+	reg = AUDIO_MODE_SPDIF_MODE | VIDEO_MODE_SLAVE_MODE;
+	writel(reg, dp->reg_base + ANALOGIX_DP_SOC_GENERAL_CTL);
+}
+
+void analogix_dp_enable_scrambling(struct analogix_dp_device *dp)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_TRAINING_PTN_SET);
+	reg &= ~SCRAMBLING_DISABLE;
+	writel(reg, dp->reg_base + ANALOGIX_DP_TRAINING_PTN_SET);
+}
+
+void analogix_dp_disable_scrambling(struct analogix_dp_device *dp)
+{
+	u32 reg;
+
+	reg = readl(dp->reg_base + ANALOGIX_DP_TRAINING_PTN_SET);
+	reg |= SCRAMBLING_DISABLE;
+	writel(reg, dp->reg_base + ANALOGIX_DP_TRAINING_PTN_SET);
+}
+
+void analogix_dp_enable_psr_crc(struct analogix_dp_device *dp)
+{
+	writel(PSR_VID_CRC_ENABLE, dp->reg_base + ANALOGIX_DP_CRC_CON);
+}
+
+static ssize_t analogix_dp_get_psr_status(struct analogix_dp_device *dp)
+{
+	ssize_t val;
+	u8 status;
+
+	val = drm_dp_dpcd_readb(&dp->aux, DP_PSR_STATUS, &status);
+	if (val < 0) {
+		dev_err(dp->dev, "PSR_STATUS read failed ret=%zd", val);
+		return val;
+	}
+	return status;
+}
+
+int analogix_dp_send_psr_spd(struct analogix_dp_device *dp,
+			     struct edp_vsc_psr *vsc, bool blocking)
+{
+	unsigned int val;
+	int ret;
+	ssize_t psr_status;
+
+	/* don't send info frame */
+	val = readl(dp->reg_base + ANALOGIX_DP_PKT_SEND_CTL);
+	val &= ~IF_EN;
+	writel(val, dp->reg_base + ANALOGIX_DP_PKT_SEND_CTL);
+
+	/* configure single frame update mode */
+	writel(PSR_FRAME_UP_TYPE_BURST | PSR_CRC_SEL_HARDWARE,
+	       dp->reg_base + ANALOGIX_DP_PSR_FRAME_UPDATE_CTRL);
+
+	/* configure VSC HB0~HB3 */
+	writel(vsc->sdp_header.HB0, dp->reg_base + ANALOGIX_DP_SPD_HB0);
+	writel(vsc->sdp_header.HB1, dp->reg_base + ANALOGIX_DP_SPD_HB1);
+	writel(vsc->sdp_header.HB2, dp->reg_base + ANALOGIX_DP_SPD_HB2);
+	writel(vsc->sdp_header.HB3, dp->reg_base + ANALOGIX_DP_SPD_HB3);
+
+	/* configure reused VSC PB0~PB3, magic number from vendor */
+	writel(0x00, dp->reg_base + ANALOGIX_DP_SPD_PB0);
+	writel(0x16, dp->reg_base + ANALOGIX_DP_SPD_PB1);
+	writel(0xCE, dp->reg_base + ANALOGIX_DP_SPD_PB2);
+	writel(0x5D, dp->reg_base + ANALOGIX_DP_SPD_PB3);
+
+	/* configure DB0 / DB1 values */
+	writel(vsc->DB0, dp->reg_base + ANALOGIX_DP_VSC_SHADOW_DB0);
+	writel(vsc->DB1, dp->reg_base + ANALOGIX_DP_VSC_SHADOW_DB1);
+
+	/* set reuse spd inforframe */
+	val = readl(dp->reg_base + ANALOGIX_DP_VIDEO_CTL_3);
+	val |= REUSE_SPD_EN;
+	writel(val, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_3);
+
+	/* mark info frame update */
+	val = readl(dp->reg_base + ANALOGIX_DP_PKT_SEND_CTL);
+	val = (val | IF_UP) & ~IF_EN;
+	writel(val, dp->reg_base + ANALOGIX_DP_PKT_SEND_CTL);
+
+	/* send info frame */
+	val = readl(dp->reg_base + ANALOGIX_DP_PKT_SEND_CTL);
+	val |= IF_EN;
+	writel(val, dp->reg_base + ANALOGIX_DP_PKT_SEND_CTL);
+
+	if (!blocking)
+		return 0;
+
+	ret = readx_poll_timeout(analogix_dp_get_psr_status, dp, psr_status,
+		psr_status >= 0 &&
+		((vsc->DB1 && psr_status == DP_PSR_SINK_ACTIVE_RFB) ||
+		(!vsc->DB1 && psr_status == DP_PSR_SINK_INACTIVE)), 1500,
+		DP_TIMEOUT_PSR_LOOP_MS * 1000);
+	if (ret) {
+		dev_warn(dp->dev, "Failed to apply PSR %d\n", ret);
+		return ret;
+	}
+	return 0;
+}
+
+ssize_t analogix_dp_transfer(struct analogix_dp_device *dp,
+			     struct drm_dp_aux_msg *msg)
+{
+	u32 reg;
+	u32 status_reg;
+	u8 *buffer = msg->buffer;
+	unsigned int i;
+	int num_transferred = 0;
+	int ret;
+
+	/* Buffer size of AUX CH is 16 bytes */
+	if (WARN_ON(msg->size > 16))
+		return -E2BIG;
+
+	/* Clear AUX CH data buffer */
+	reg = BUF_CLR;
+	writel(reg, dp->reg_base + ANALOGIX_DP_BUFFER_DATA_CTL);
+
+	switch (msg->request & ~DP_AUX_I2C_MOT) {
+	case DP_AUX_I2C_WRITE:
+		reg = AUX_TX_COMM_WRITE | AUX_TX_COMM_I2C_TRANSACTION;
+		if (msg->request & DP_AUX_I2C_MOT)
+			reg |= AUX_TX_COMM_MOT;
+		break;
+
+	case DP_AUX_I2C_READ:
+		reg = AUX_TX_COMM_READ | AUX_TX_COMM_I2C_TRANSACTION;
+		if (msg->request & DP_AUX_I2C_MOT)
+			reg |= AUX_TX_COMM_MOT;
+		break;
+
+	case DP_AUX_NATIVE_WRITE:
+		reg = AUX_TX_COMM_WRITE | AUX_TX_COMM_DP_TRANSACTION;
+		break;
+
+	case DP_AUX_NATIVE_READ:
+		reg = AUX_TX_COMM_READ | AUX_TX_COMM_DP_TRANSACTION;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	reg |= AUX_LENGTH(msg->size);
+	writel(reg, dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_1);
+
+	/* Select DPCD device address */
+	reg = AUX_ADDR_7_0(msg->address);
+	writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_7_0);
+	reg = AUX_ADDR_15_8(msg->address);
+	writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_15_8);
+	reg = AUX_ADDR_19_16(msg->address);
+	writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_19_16);
+
+	if (!(msg->request & DP_AUX_I2C_READ)) {
+		for (i = 0; i < msg->size; i++) {
+			reg = buffer[i];
+			writel(reg, dp->reg_base + ANALOGIX_DP_BUF_DATA_0 +
+			       4 * i);
+			num_transferred++;
+		}
+	}
+
+	/* Enable AUX CH operation */
+	reg = AUX_EN;
+
+	/* Zero-sized messages specify address-only transactions. */
+	if (msg->size < 1)
+		reg |= ADDR_ONLY;
+
+	writel(reg, dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_2);
+
+	ret = readx_poll_timeout(readl, dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_2,
+				 reg, !(reg & AUX_EN), 25, 500 * 1000);
+	if (ret) {
+		dev_err(dp->dev, "AUX CH enable timeout!\n");
+		goto aux_error;
+	}
+
+	/* TODO: Wait for an interrupt instead of looping? */
+	/* Is AUX CH command reply received? */
+	ret = readx_poll_timeout(readl, dp->reg_base + ANALOGIX_DP_INT_STA,
+				 reg, reg & RPLY_RECEIV, 10, 20 * 1000);
+	if (ret) {
+		dev_err(dp->dev, "AUX CH cmd reply timeout!\n");
+		goto aux_error;
+	}
+
+	/* Clear interrupt source for AUX CH command reply */
+	writel(RPLY_RECEIV, dp->reg_base + ANALOGIX_DP_INT_STA);
+
+	/* Clear interrupt source for AUX CH access error */
+	reg = readl(dp->reg_base + ANALOGIX_DP_INT_STA);
+	status_reg = readl(dp->reg_base + ANALOGIX_DP_AUX_CH_STA);
+	if ((reg & AUX_ERR) || (status_reg & AUX_STATUS_MASK)) {
+		writel(AUX_ERR, dp->reg_base + ANALOGIX_DP_INT_STA);
+
+		dev_warn(dp->dev, "AUX CH error happened: %#x (%d)\n",
+			 status_reg & AUX_STATUS_MASK, !!(reg & AUX_ERR));
+		goto aux_error;
+	}
+
+	if (msg->request & DP_AUX_I2C_READ) {
+		for (i = 0; i < msg->size; i++) {
+			reg = readl(dp->reg_base + ANALOGIX_DP_BUF_DATA_0 +
+				    4 * i);
+			buffer[i] = (unsigned char)reg;
+			num_transferred++;
+		}
+	}
+
+	/* Check if Rx sends defer */
+	reg = readl(dp->reg_base + ANALOGIX_DP_AUX_RX_COMM);
+	if (reg == AUX_RX_COMM_AUX_DEFER)
+		msg->reply = DP_AUX_NATIVE_REPLY_DEFER;
+	else if (reg == AUX_RX_COMM_I2C_DEFER)
+		msg->reply = DP_AUX_I2C_REPLY_DEFER;
+	else if ((msg->request & ~DP_AUX_I2C_MOT) == DP_AUX_I2C_WRITE ||
+		 (msg->request & ~DP_AUX_I2C_MOT) == DP_AUX_I2C_READ)
+		msg->reply = DP_AUX_I2C_REPLY_ACK;
+	else if ((msg->request & ~DP_AUX_I2C_MOT) == DP_AUX_NATIVE_WRITE ||
+		 (msg->request & ~DP_AUX_I2C_MOT) == DP_AUX_NATIVE_READ)
+		msg->reply = DP_AUX_NATIVE_REPLY_ACK;
+
+	return num_transferred > 0 ? num_transferred : -EBUSY;
+
+aux_error:
+	/* if aux err happen, reset aux */
+	analogix_dp_init_aux(dp);
+
+	return -EREMOTEIO;
+}
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
new file mode 100644
index 000000000..0cf27c731
--- /dev/null
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
@@ -0,0 +1,420 @@
+/*
+ * Register definition file for Analogix DP core driver
+ *
+ * Copyright (C) 2012 Samsung Electronics Co., Ltd.
+ * Author: Jingoo Han <jg1.han@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _ANALOGIX_DP_REG_H
+#define _ANALOGIX_DP_REG_H
+
+#define ANALOGIX_DP_TX_SW_RESET			0x14
+#define ANALOGIX_DP_FUNC_EN_1			0x18
+#define ANALOGIX_DP_FUNC_EN_2			0x1C
+#define ANALOGIX_DP_VIDEO_CTL_1			0x20
+#define ANALOGIX_DP_VIDEO_CTL_2			0x24
+#define ANALOGIX_DP_VIDEO_CTL_3			0x28
+
+#define ANALOGIX_DP_VIDEO_CTL_8			0x3C
+#define ANALOGIX_DP_VIDEO_CTL_10		0x44
+
+#define ANALOGIX_DP_SPDIF_AUDIO_CTL_0		0xD8
+
+#define ANALOGIX_DP_PLL_REG_1			0xfc
+#define ANALOGIX_DP_PLL_REG_2			0x9e4
+#define ANALOGIX_DP_PLL_REG_3			0x9e8
+#define ANALOGIX_DP_PLL_REG_4			0x9ec
+#define ANALOGIX_DP_PLL_REG_5			0xa00
+
+#define ANALOGIX_DP_PD				0x12c
+
+#define ANALOGIX_DP_IF_TYPE			0x244
+#define ANALOGIX_DP_IF_PKT_DB1			0x254
+#define ANALOGIX_DP_IF_PKT_DB2			0x258
+#define ANALOGIX_DP_SPD_HB0			0x2F8
+#define ANALOGIX_DP_SPD_HB1			0x2FC
+#define ANALOGIX_DP_SPD_HB2			0x300
+#define ANALOGIX_DP_SPD_HB3			0x304
+#define ANALOGIX_DP_SPD_PB0			0x308
+#define ANALOGIX_DP_SPD_PB1			0x30C
+#define ANALOGIX_DP_SPD_PB2			0x310
+#define ANALOGIX_DP_SPD_PB3			0x314
+#define ANALOGIX_DP_PSR_FRAME_UPDATE_CTRL	0x318
+#define ANALOGIX_DP_VSC_SHADOW_DB0		0x31C
+#define ANALOGIX_DP_VSC_SHADOW_DB1		0x320
+
+#define ANALOGIX_DP_LANE_MAP			0x35C
+
+#define ANALOGIX_DP_ANALOG_CTL_1		0x370
+#define ANALOGIX_DP_ANALOG_CTL_2		0x374
+#define ANALOGIX_DP_ANALOG_CTL_3		0x378
+#define ANALOGIX_DP_PLL_FILTER_CTL_1		0x37C
+#define ANALOGIX_DP_TX_AMP_TUNING_CTL		0x380
+
+#define ANALOGIX_DP_AUX_HW_RETRY_CTL		0x390
+
+#define ANALOGIX_DP_COMMON_INT_STA_1		0x3C4
+#define ANALOGIX_DP_COMMON_INT_STA_2		0x3C8
+#define ANALOGIX_DP_COMMON_INT_STA_3		0x3CC
+#define ANALOGIX_DP_COMMON_INT_STA_4		0x3D0
+#define ANALOGIX_DP_INT_STA			0x3DC
+#define ANALOGIX_DP_COMMON_INT_MASK_1		0x3E0
+#define ANALOGIX_DP_COMMON_INT_MASK_2		0x3E4
+#define ANALOGIX_DP_COMMON_INT_MASK_3		0x3E8
+#define ANALOGIX_DP_COMMON_INT_MASK_4		0x3EC
+#define ANALOGIX_DP_INT_STA_MASK		0x3F8
+#define ANALOGIX_DP_INT_CTL			0x3FC
+
+#define ANALOGIX_DP_SYS_CTL_1			0x600
+#define ANALOGIX_DP_SYS_CTL_2			0x604
+#define ANALOGIX_DP_SYS_CTL_3			0x608
+#define ANALOGIX_DP_SYS_CTL_4			0x60C
+
+#define ANALOGIX_DP_PKT_SEND_CTL		0x640
+#define ANALOGIX_DP_HDCP_CTL			0x648
+
+#define ANALOGIX_DP_LINK_BW_SET			0x680
+#define ANALOGIX_DP_LANE_COUNT_SET		0x684
+#define ANALOGIX_DP_TRAINING_PTN_SET		0x688
+#define ANALOGIX_DP_LN0_LINK_TRAINING_CTL	0x68C
+#define ANALOGIX_DP_LN1_LINK_TRAINING_CTL	0x690
+#define ANALOGIX_DP_LN2_LINK_TRAINING_CTL	0x694
+#define ANALOGIX_DP_LN3_LINK_TRAINING_CTL	0x698
+
+#define ANALOGIX_DP_DEBUG_CTL			0x6C0
+#define ANALOGIX_DP_HPD_DEGLITCH_L		0x6C4
+#define ANALOGIX_DP_HPD_DEGLITCH_H		0x6C8
+#define ANALOGIX_DP_LINK_DEBUG_CTL		0x6E0
+
+#define ANALOGIX_DP_M_VID_0			0x700
+#define ANALOGIX_DP_M_VID_1			0x704
+#define ANALOGIX_DP_M_VID_2			0x708
+#define ANALOGIX_DP_N_VID_0			0x70C
+#define ANALOGIX_DP_N_VID_1			0x710
+#define ANALOGIX_DP_N_VID_2			0x714
+
+#define ANALOGIX_DP_PLL_CTL			0x71C
+#define ANALOGIX_DP_PHY_PD			0x720
+#define ANALOGIX_DP_PHY_TEST			0x724
+
+#define ANALOGIX_DP_VIDEO_FIFO_THRD		0x730
+#define ANALOGIX_DP_AUDIO_MARGIN		0x73C
+
+#define ANALOGIX_DP_M_VID_GEN_FILTER_TH		0x764
+#define ANALOGIX_DP_M_AUD_GEN_FILTER_TH		0x778
+#define ANALOGIX_DP_AUX_CH_STA			0x780
+#define ANALOGIX_DP_AUX_CH_DEFER_CTL		0x788
+#define ANALOGIX_DP_AUX_RX_COMM			0x78C
+#define ANALOGIX_DP_BUFFER_DATA_CTL		0x790
+#define ANALOGIX_DP_AUX_CH_CTL_1		0x794
+#define ANALOGIX_DP_AUX_ADDR_7_0		0x798
+#define ANALOGIX_DP_AUX_ADDR_15_8		0x79C
+#define ANALOGIX_DP_AUX_ADDR_19_16		0x7A0
+#define ANALOGIX_DP_AUX_CH_CTL_2		0x7A4
+
+#define ANALOGIX_DP_BUF_DATA_0			0x7C0
+
+#define ANALOGIX_DP_SOC_GENERAL_CTL		0x800
+
+#define ANALOGIX_DP_CRC_CON			0x890
+
+/* ANALOGIX_DP_TX_SW_RESET */
+#define RESET_DP_TX				(0x1 << 0)
+
+/* ANALOGIX_DP_FUNC_EN_1 */
+#define MASTER_VID_FUNC_EN_N			(0x1 << 7)
+#define RK_VID_CAP_FUNC_EN_N			(0x1 << 6)
+#define SLAVE_VID_FUNC_EN_N			(0x1 << 5)
+#define RK_VID_FIFO_FUNC_EN_N			(0x1 << 5)
+#define AUD_FIFO_FUNC_EN_N			(0x1 << 4)
+#define AUD_FUNC_EN_N				(0x1 << 3)
+#define HDCP_FUNC_EN_N				(0x1 << 2)
+#define CRC_FUNC_EN_N				(0x1 << 1)
+#define SW_FUNC_EN_N				(0x1 << 0)
+
+/* ANALOGIX_DP_FUNC_EN_2 */
+#define SSC_FUNC_EN_N				(0x1 << 7)
+#define AUX_FUNC_EN_N				(0x1 << 2)
+#define SERDES_FIFO_FUNC_EN_N			(0x1 << 1)
+#define LS_CLK_DOMAIN_FUNC_EN_N			(0x1 << 0)
+
+/* ANALOGIX_DP_VIDEO_CTL_1 */
+#define VIDEO_EN				(0x1 << 7)
+#define HDCP_VIDEO_MUTE				(0x1 << 6)
+
+/* ANALOGIX_DP_VIDEO_CTL_1 */
+#define IN_D_RANGE_MASK				(0x1 << 7)
+#define IN_D_RANGE_SHIFT			(7)
+#define IN_D_RANGE_CEA				(0x1 << 7)
+#define IN_D_RANGE_VESA				(0x0 << 7)
+#define IN_BPC_MASK				(0x7 << 4)
+#define IN_BPC_SHIFT				(4)
+#define IN_BPC_12_BITS				(0x3 << 4)
+#define IN_BPC_10_BITS				(0x2 << 4)
+#define IN_BPC_8_BITS				(0x1 << 4)
+#define IN_BPC_6_BITS				(0x0 << 4)
+#define IN_COLOR_F_MASK				(0x3 << 0)
+#define IN_COLOR_F_SHIFT			(0)
+#define IN_COLOR_F_YCBCR444			(0x2 << 0)
+#define IN_COLOR_F_YCBCR422			(0x1 << 0)
+#define IN_COLOR_F_RGB				(0x0 << 0)
+
+/* ANALOGIX_DP_VIDEO_CTL_3 */
+#define IN_YC_COEFFI_MASK			(0x1 << 7)
+#define IN_YC_COEFFI_SHIFT			(7)
+#define IN_YC_COEFFI_ITU709			(0x1 << 7)
+#define IN_YC_COEFFI_ITU601			(0x0 << 7)
+#define VID_CHK_UPDATE_TYPE_MASK		(0x1 << 4)
+#define VID_CHK_UPDATE_TYPE_SHIFT		(4)
+#define VID_CHK_UPDATE_TYPE_1			(0x1 << 4)
+#define VID_CHK_UPDATE_TYPE_0			(0x0 << 4)
+#define REUSE_SPD_EN				(0x1 << 3)
+
+/* ANALOGIX_DP_VIDEO_CTL_8 */
+#define VID_HRES_TH(x)				(((x) & 0xf) << 4)
+#define VID_VRES_TH(x)				(((x) & 0xf) << 0)
+
+/* ANALOGIX_DP_VIDEO_CTL_10 */
+#define FORMAT_SEL				(0x1 << 4)
+#define INTERACE_SCAN_CFG			(0x1 << 2)
+#define VSYNC_POLARITY_CFG			(0x1 << 1)
+#define HSYNC_POLARITY_CFG			(0x1 << 0)
+
+/* ANALOGIX_DP_PLL_REG_1 */
+#define REF_CLK_24M				(0x1 << 0)
+#define REF_CLK_27M				(0x0 << 0)
+#define REF_CLK_MASK				(0x1 << 0)
+
+/* ANALOGIX_DP_PSR_FRAME_UPDATE_CTRL */
+#define PSR_FRAME_UP_TYPE_BURST			(0x1 << 0)
+#define PSR_FRAME_UP_TYPE_SINGLE		(0x0 << 0)
+#define PSR_CRC_SEL_HARDWARE			(0x1 << 1)
+#define PSR_CRC_SEL_MANUALLY			(0x0 << 1)
+
+/* ANALOGIX_DP_LANE_MAP */
+#define LANE3_MAP_LOGIC_LANE_0			(0x0 << 6)
+#define LANE3_MAP_LOGIC_LANE_1			(0x1 << 6)
+#define LANE3_MAP_LOGIC_LANE_2			(0x2 << 6)
+#define LANE3_MAP_LOGIC_LANE_3			(0x3 << 6)
+#define LANE2_MAP_LOGIC_LANE_0			(0x0 << 4)
+#define LANE2_MAP_LOGIC_LANE_1			(0x1 << 4)
+#define LANE2_MAP_LOGIC_LANE_2			(0x2 << 4)
+#define LANE2_MAP_LOGIC_LANE_3			(0x3 << 4)
+#define LANE1_MAP_LOGIC_LANE_0			(0x0 << 2)
+#define LANE1_MAP_LOGIC_LANE_1			(0x1 << 2)
+#define LANE1_MAP_LOGIC_LANE_2			(0x2 << 2)
+#define LANE1_MAP_LOGIC_LANE_3			(0x3 << 2)
+#define LANE0_MAP_LOGIC_LANE_0			(0x0 << 0)
+#define LANE0_MAP_LOGIC_LANE_1			(0x1 << 0)
+#define LANE0_MAP_LOGIC_LANE_2			(0x2 << 0)
+#define LANE0_MAP_LOGIC_LANE_3			(0x3 << 0)
+
+/* ANALOGIX_DP_ANALOG_CTL_1 */
+#define TX_TERMINAL_CTRL_50_OHM			(0x1 << 4)
+
+/* ANALOGIX_DP_ANALOG_CTL_2 */
+#define SEL_24M					(0x1 << 3)
+#define TX_DVDD_BIT_1_0625V			(0x4 << 0)
+
+/* ANALOGIX_DP_ANALOG_CTL_3 */
+#define DRIVE_DVDD_BIT_1_0625V			(0x4 << 5)
+#define VCO_BIT_600_MICRO			(0x5 << 0)
+
+/* ANALOGIX_DP_PLL_FILTER_CTL_1 */
+#define PD_RING_OSC				(0x1 << 6)
+#define AUX_TERMINAL_CTRL_50_OHM		(0x2 << 4)
+#define TX_CUR1_2X				(0x1 << 2)
+#define TX_CUR_16_MA				(0x3 << 0)
+
+/* ANALOGIX_DP_TX_AMP_TUNING_CTL */
+#define CH3_AMP_400_MV				(0x0 << 24)
+#define CH2_AMP_400_MV				(0x0 << 16)
+#define CH1_AMP_400_MV				(0x0 << 8)
+#define CH0_AMP_400_MV				(0x0 << 0)
+
+/* ANALOGIX_DP_AUX_HW_RETRY_CTL */
+#define AUX_BIT_PERIOD_EXPECTED_DELAY(x)	(((x) & 0x7) << 8)
+#define AUX_HW_RETRY_INTERVAL_MASK		(0x3 << 3)
+#define AUX_HW_RETRY_INTERVAL_600_MICROSECONDS	(0x0 << 3)
+#define AUX_HW_RETRY_INTERVAL_800_MICROSECONDS	(0x1 << 3)
+#define AUX_HW_RETRY_INTERVAL_1000_MICROSECONDS	(0x2 << 3)
+#define AUX_HW_RETRY_INTERVAL_1800_MICROSECONDS	(0x3 << 3)
+#define AUX_HW_RETRY_COUNT_SEL(x)		(((x) & 0x7) << 0)
+
+/* ANALOGIX_DP_COMMON_INT_STA_1 */
+#define VSYNC_DET				(0x1 << 7)
+#define PLL_LOCK_CHG				(0x1 << 6)
+#define SPDIF_ERR				(0x1 << 5)
+#define SPDIF_UNSTBL				(0x1 << 4)
+#define VID_FORMAT_CHG				(0x1 << 3)
+#define AUD_CLK_CHG				(0x1 << 2)
+#define VID_CLK_CHG				(0x1 << 1)
+#define SW_INT					(0x1 << 0)
+
+/* ANALOGIX_DP_COMMON_INT_STA_2 */
+#define ENC_EN_CHG				(0x1 << 6)
+#define HW_BKSV_RDY				(0x1 << 3)
+#define HW_SHA_DONE				(0x1 << 2)
+#define HW_AUTH_STATE_CHG			(0x1 << 1)
+#define HW_AUTH_DONE				(0x1 << 0)
+
+/* ANALOGIX_DP_COMMON_INT_STA_3 */
+#define AFIFO_UNDER				(0x1 << 7)
+#define AFIFO_OVER				(0x1 << 6)
+#define R0_CHK_FLAG				(0x1 << 5)
+
+/* ANALOGIX_DP_COMMON_INT_STA_4 */
+#define PSR_ACTIVE				(0x1 << 7)
+#define PSR_INACTIVE				(0x1 << 6)
+#define SPDIF_BI_PHASE_ERR			(0x1 << 5)
+#define HOTPLUG_CHG				(0x1 << 2)
+#define HPD_LOST				(0x1 << 1)
+#define PLUG					(0x1 << 0)
+
+/* ANALOGIX_DP_INT_STA */
+#define INT_HPD					(0x1 << 6)
+#define HW_TRAINING_FINISH			(0x1 << 5)
+#define RPLY_RECEIV				(0x1 << 1)
+#define AUX_ERR					(0x1 << 0)
+
+/* ANALOGIX_DP_INT_CTL */
+#define SOFT_INT_CTRL				(0x1 << 2)
+#define INT_POL1				(0x1 << 1)
+#define INT_POL0				(0x1 << 0)
+
+/* ANALOGIX_DP_SYS_CTL_1 */
+#define DET_STA					(0x1 << 2)
+#define FORCE_DET				(0x1 << 1)
+#define DET_CTRL				(0x1 << 0)
+
+/* ANALOGIX_DP_SYS_CTL_2 */
+#define CHA_CRI(x)				(((x) & 0xf) << 4)
+#define CHA_STA					(0x1 << 2)
+#define FORCE_CHA				(0x1 << 1)
+#define CHA_CTRL				(0x1 << 0)
+
+/* ANALOGIX_DP_SYS_CTL_3 */
+#define HPD_STATUS				(0x1 << 6)
+#define F_HPD					(0x1 << 5)
+#define HPD_CTRL				(0x1 << 4)
+#define HDCP_RDY				(0x1 << 3)
+#define STRM_VALID				(0x1 << 2)
+#define F_VALID					(0x1 << 1)
+#define VALID_CTRL				(0x1 << 0)
+
+/* ANALOGIX_DP_SYS_CTL_4 */
+#define FIX_M_AUD				(0x1 << 4)
+#define ENHANCED				(0x1 << 3)
+#define FIX_M_VID				(0x1 << 2)
+#define M_VID_UPDATE_CTRL			(0x3 << 0)
+
+/* ANALOGIX_DP_TRAINING_PTN_SET */
+#define SCRAMBLER_TYPE				(0x1 << 9)
+#define HW_LINK_TRAINING_PATTERN		(0x1 << 8)
+#define SCRAMBLING_DISABLE			(0x1 << 5)
+#define SCRAMBLING_ENABLE			(0x0 << 5)
+#define LINK_QUAL_PATTERN_SET_MASK		(0x3 << 2)
+#define LINK_QUAL_PATTERN_SET_PRBS7		(0x3 << 2)
+#define LINK_QUAL_PATTERN_SET_D10_2		(0x1 << 2)
+#define LINK_QUAL_PATTERN_SET_DISABLE		(0x0 << 2)
+#define SW_TRAINING_PATTERN_SET_MASK		(0x3 << 0)
+#define SW_TRAINING_PATTERN_SET_PTN2		(0x2 << 0)
+#define SW_TRAINING_PATTERN_SET_PTN1		(0x1 << 0)
+#define SW_TRAINING_PATTERN_SET_NORMAL		(0x0 << 0)
+
+/* ANALOGIX_DP_LN0_LINK_TRAINING_CTL */
+#define PRE_EMPHASIS_SET_MASK			(0x3 << 3)
+#define PRE_EMPHASIS_SET_SHIFT			(3)
+
+/* ANALOGIX_DP_DEBUG_CTL */
+#define PLL_LOCK				(0x1 << 4)
+#define F_PLL_LOCK				(0x1 << 3)
+#define PLL_LOCK_CTRL				(0x1 << 2)
+#define PN_INV					(0x1 << 0)
+
+/* ANALOGIX_DP_PLL_CTL */
+#define DP_PLL_PD				(0x1 << 7)
+#define DP_PLL_RESET				(0x1 << 6)
+#define DP_PLL_LOOP_BIT_DEFAULT			(0x1 << 4)
+#define DP_PLL_REF_BIT_1_1250V			(0x5 << 0)
+#define DP_PLL_REF_BIT_1_2500V			(0x7 << 0)
+
+/* ANALOGIX_DP_PHY_PD */
+#define DP_INC_BG				(0x1 << 7)
+#define DP_EXP_BG				(0x1 << 6)
+#define DP_PHY_PD				(0x1 << 5)
+#define RK_AUX_PD				(0x1 << 5)
+#define AUX_PD					(0x1 << 4)
+#define RK_PLL_PD				(0x1 << 4)
+#define CH3_PD					(0x1 << 3)
+#define CH2_PD					(0x1 << 2)
+#define CH1_PD					(0x1 << 1)
+#define CH0_PD					(0x1 << 0)
+#define DP_ALL_PD				(0xff)
+
+/* ANALOGIX_DP_PHY_TEST */
+#define MACRO_RST				(0x1 << 5)
+#define CH1_TEST				(0x1 << 1)
+#define CH0_TEST				(0x1 << 0)
+
+/* ANALOGIX_DP_AUX_CH_STA */
+#define AUX_BUSY				(0x1 << 4)
+#define AUX_STATUS_MASK				(0xf << 0)
+
+/* ANALOGIX_DP_AUX_CH_DEFER_CTL */
+#define DEFER_CTRL_EN				(0x1 << 7)
+#define DEFER_COUNT(x)				(((x) & 0x7f) << 0)
+
+/* ANALOGIX_DP_AUX_RX_COMM */
+#define AUX_RX_COMM_I2C_DEFER			(0x2 << 2)
+#define AUX_RX_COMM_AUX_DEFER			(0x2 << 0)
+
+/* ANALOGIX_DP_BUFFER_DATA_CTL */
+#define BUF_CLR					(0x1 << 7)
+#define BUF_DATA_COUNT(x)			(((x) & 0x1f) << 0)
+
+/* ANALOGIX_DP_AUX_CH_CTL_1 */
+#define AUX_LENGTH(x)				(((x - 1) & 0xf) << 4)
+#define AUX_TX_COMM_MASK			(0xf << 0)
+#define AUX_TX_COMM_DP_TRANSACTION		(0x1 << 3)
+#define AUX_TX_COMM_I2C_TRANSACTION		(0x0 << 3)
+#define AUX_TX_COMM_MOT				(0x1 << 2)
+#define AUX_TX_COMM_WRITE			(0x0 << 0)
+#define AUX_TX_COMM_READ			(0x1 << 0)
+
+/* ANALOGIX_DP_AUX_ADDR_7_0 */
+#define AUX_ADDR_7_0(x)				(((x) >> 0) & 0xff)
+
+/* ANALOGIX_DP_AUX_ADDR_15_8 */
+#define AUX_ADDR_15_8(x)			(((x) >> 8) & 0xff)
+
+/* ANALOGIX_DP_AUX_ADDR_19_16 */
+#define AUX_ADDR_19_16(x)			(((x) >> 16) & 0x0f)
+
+/* ANALOGIX_DP_AUX_CH_CTL_2 */
+#define ADDR_ONLY				(0x1 << 1)
+#define AUX_EN					(0x1 << 0)
+
+/* ANALOGIX_DP_SOC_GENERAL_CTL */
+#define AUDIO_MODE_SPDIF_MODE			(0x1 << 8)
+#define AUDIO_MODE_MASTER_MODE			(0x0 << 8)
+#define MASTER_VIDEO_INTERLACE_EN		(0x1 << 4)
+#define VIDEO_MASTER_CLK_SEL			(0x1 << 2)
+#define VIDEO_MASTER_MODE_EN			(0x1 << 1)
+#define VIDEO_MODE_MASK				(0x1 << 0)
+#define VIDEO_MODE_SLAVE_MODE			(0x1 << 0)
+#define VIDEO_MODE_MASTER_MODE			(0x0 << 0)
+
+/* ANALOGIX_DP_PKT_SEND_CTL */
+#define IF_UP					(0x1 << 4)
+#define IF_EN					(0x1 << 0)
+
+/* ANALOGIX_DP_CRC_CON */
+#define PSR_VID_CRC_FLUSH			(0x1 << 2)
+#define PSR_VID_CRC_ENABLE			(0x1 << 0)
+
+#endif /* _ANALOGIX_DP_REG_H */
diff --git a/drivers/gpu/drm/bridge/cdns-dsi.c b/drivers/gpu/drm/bridge/cdns-dsi.c
new file mode 100644
index 000000000..0573c5250
--- /dev/null
+++ b/drivers/gpu/drm/bridge/cdns-dsi.c
@@ -0,0 +1,1624 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright: 2017 Cadence Design Systems, Inc.
+ *
+ * Author: Boris Brezillon <boris.brezillon@bootlin.com>
+ */
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_bridge.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_panel.h>
+#include <video/mipi_display.h>
+
+#include <linux/clk.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_graph.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/reset.h>
+
+#define IP_CONF				0x0
+#define SP_HS_FIFO_DEPTH(x)		(((x) & GENMASK(30, 26)) >> 26)
+#define SP_LP_FIFO_DEPTH(x)		(((x) & GENMASK(25, 21)) >> 21)
+#define VRS_FIFO_DEPTH(x)		(((x) & GENMASK(20, 16)) >> 16)
+#define DIRCMD_FIFO_DEPTH(x)		(((x) & GENMASK(15, 13)) >> 13)
+#define SDI_IFACE_32			BIT(12)
+#define INTERNAL_DATAPATH_32		(0 << 10)
+#define INTERNAL_DATAPATH_16		(1 << 10)
+#define INTERNAL_DATAPATH_8		(3 << 10)
+#define INTERNAL_DATAPATH_SIZE		((x) & GENMASK(11, 10))
+#define NUM_IFACE(x)			((((x) & GENMASK(9, 8)) >> 8) + 1)
+#define MAX_LANE_NB(x)			(((x) & GENMASK(7, 6)) >> 6)
+#define RX_FIFO_DEPTH(x)		((x) & GENMASK(5, 0))
+
+#define MCTL_MAIN_DATA_CTL		0x4
+#define TE_MIPI_POLLING_EN		BIT(25)
+#define TE_HW_POLLING_EN		BIT(24)
+#define DISP_EOT_GEN			BIT(18)
+#define HOST_EOT_GEN			BIT(17)
+#define DISP_GEN_CHECKSUM		BIT(16)
+#define DISP_GEN_ECC			BIT(15)
+#define BTA_EN				BIT(14)
+#define READ_EN				BIT(13)
+#define REG_TE_EN			BIT(12)
+#define IF_TE_EN(x)			BIT(8 + (x))
+#define TVG_SEL				BIT(6)
+#define VID_EN				BIT(5)
+#define IF_VID_SELECT(x)		((x) << 2)
+#define IF_VID_SELECT_MASK		GENMASK(3, 2)
+#define IF_VID_MODE			BIT(1)
+#define LINK_EN				BIT(0)
+
+#define MCTL_MAIN_PHY_CTL		0x8
+#define HS_INVERT_DAT(x)		BIT(19 + ((x) * 2))
+#define SWAP_PINS_DAT(x)		BIT(18 + ((x) * 2))
+#define HS_INVERT_CLK			BIT(17)
+#define SWAP_PINS_CLK			BIT(16)
+#define HS_SKEWCAL_EN			BIT(15)
+#define WAIT_BURST_TIME(x)		((x) << 10)
+#define DATA_ULPM_EN(x)			BIT(6 + (x))
+#define CLK_ULPM_EN			BIT(5)
+#define CLK_CONTINUOUS			BIT(4)
+#define DATA_LANE_EN(x)			BIT((x) - 1)
+
+#define MCTL_MAIN_EN			0xc
+#define DATA_FORCE_STOP			BIT(17)
+#define CLK_FORCE_STOP			BIT(16)
+#define IF_EN(x)			BIT(13 + (x))
+#define DATA_LANE_ULPM_REQ(l)		BIT(9 + (l))
+#define CLK_LANE_ULPM_REQ		BIT(8)
+#define DATA_LANE_START(x)		BIT(4 + (x))
+#define CLK_LANE_EN			BIT(3)
+#define PLL_START			BIT(0)
+
+#define MCTL_DPHY_CFG0			0x10
+#define DPHY_C_RSTB			BIT(20)
+#define DPHY_D_RSTB(x)			GENMASK(15 + (x), 16)
+#define DPHY_PLL_PDN			BIT(10)
+#define DPHY_CMN_PDN			BIT(9)
+#define DPHY_C_PDN			BIT(8)
+#define DPHY_D_PDN(x)			GENMASK(3 + (x), 4)
+#define DPHY_ALL_D_PDN			GENMASK(7, 4)
+#define DPHY_PLL_PSO			BIT(1)
+#define DPHY_CMN_PSO			BIT(0)
+
+#define MCTL_DPHY_TIMEOUT1		0x14
+#define HSTX_TIMEOUT(x)			((x) << 4)
+#define HSTX_TIMEOUT_MAX		GENMASK(17, 0)
+#define CLK_DIV(x)			(x)
+#define CLK_DIV_MAX			GENMASK(3, 0)
+
+#define MCTL_DPHY_TIMEOUT2		0x18
+#define LPRX_TIMEOUT(x)			(x)
+
+#define MCTL_ULPOUT_TIME		0x1c
+#define DATA_LANE_ULPOUT_TIME(x)	((x) << 9)
+#define CLK_LANE_ULPOUT_TIME(x)		(x)
+
+#define MCTL_3DVIDEO_CTL		0x20
+#define VID_VSYNC_3D_EN			BIT(7)
+#define VID_VSYNC_3D_LR			BIT(5)
+#define VID_VSYNC_3D_SECOND_EN		BIT(4)
+#define VID_VSYNC_3DFORMAT_LINE		(0 << 2)
+#define VID_VSYNC_3DFORMAT_FRAME	(1 << 2)
+#define VID_VSYNC_3DFORMAT_PIXEL	(2 << 2)
+#define VID_VSYNC_3DMODE_OFF		0
+#define VID_VSYNC_3DMODE_PORTRAIT	1
+#define VID_VSYNC_3DMODE_LANDSCAPE	2
+
+#define MCTL_MAIN_STS			0x24
+#define MCTL_MAIN_STS_CTL		0x130
+#define MCTL_MAIN_STS_CLR		0x150
+#define MCTL_MAIN_STS_FLAG		0x170
+#define HS_SKEWCAL_DONE			BIT(11)
+#define IF_UNTERM_PKT_ERR(x)		BIT(8 + (x))
+#define LPRX_TIMEOUT_ERR		BIT(7)
+#define HSTX_TIMEOUT_ERR		BIT(6)
+#define DATA_LANE_RDY(l)		BIT(2 + (l))
+#define CLK_LANE_RDY			BIT(1)
+#define PLL_LOCKED			BIT(0)
+
+#define MCTL_DPHY_ERR			0x28
+#define MCTL_DPHY_ERR_CTL1		0x148
+#define MCTL_DPHY_ERR_CLR		0x168
+#define MCTL_DPHY_ERR_FLAG		0x188
+#define ERR_CONT_LP(x, l)		BIT(18 + ((x) * 4) + (l))
+#define ERR_CONTROL(l)			BIT(14 + (l))
+#define ERR_SYNESC(l)			BIT(10 + (l))
+#define ERR_ESC(l)			BIT(6 + (l))
+
+#define MCTL_DPHY_ERR_CTL2		0x14c
+#define ERR_CONT_LP_EDGE(x, l)		BIT(12 + ((x) * 4) + (l))
+#define ERR_CONTROL_EDGE(l)		BIT(8 + (l))
+#define ERR_SYN_ESC_EDGE(l)		BIT(4 + (l))
+#define ERR_ESC_EDGE(l)			BIT(0 + (l))
+
+#define MCTL_LANE_STS			0x2c
+#define PPI_C_TX_READY_HS		BIT(18)
+#define DPHY_PLL_LOCK			BIT(17)
+#define PPI_D_RX_ULPS_ESC(x)		(((x) & GENMASK(15, 12)) >> 12)
+#define LANE_STATE_START		0
+#define LANE_STATE_IDLE			1
+#define LANE_STATE_WRITE		2
+#define LANE_STATE_ULPM			3
+#define LANE_STATE_READ			4
+#define DATA_LANE_STATE(l, val)		\
+	(((val) >> (2 + 2 * (l) + ((l) ? 1 : 0))) & GENMASK((l) ? 1 : 2, 0))
+#define CLK_LANE_STATE_HS		2
+#define CLK_LANE_STATE(val)		((val) & GENMASK(1, 0))
+
+#define DSC_MODE_CTL			0x30
+#define DSC_MODE_EN			BIT(0)
+
+#define DSC_CMD_SEND			0x34
+#define DSC_SEND_PPS			BIT(0)
+#define DSC_EXECUTE_QUEUE		BIT(1)
+
+#define DSC_PPS_WRDAT			0x38
+
+#define DSC_MODE_STS			0x3c
+#define DSC_PPS_DONE			BIT(1)
+#define DSC_EXEC_DONE			BIT(2)
+
+#define CMD_MODE_CTL			0x70
+#define IF_LP_EN(x)			BIT(9 + (x))
+#define IF_VCHAN_ID(x, c)		((c) << ((x) * 2))
+
+#define CMD_MODE_CTL2			0x74
+#define TE_TIMEOUT(x)			((x) << 11)
+#define FILL_VALUE(x)			((x) << 3)
+#define ARB_IF_WITH_HIGHEST_PRIORITY(x)	((x) << 1)
+#define ARB_ROUND_ROBIN_MODE		BIT(0)
+
+#define CMD_MODE_STS			0x78
+#define CMD_MODE_STS_CTL		0x134
+#define CMD_MODE_STS_CLR		0x154
+#define CMD_MODE_STS_FLAG		0x174
+#define ERR_IF_UNDERRUN(x)		BIT(4 + (x))
+#define ERR_UNWANTED_READ		BIT(3)
+#define ERR_TE_MISS			BIT(2)
+#define ERR_NO_TE			BIT(1)
+#define CSM_RUNNING			BIT(0)
+
+#define DIRECT_CMD_SEND			0x80
+
+#define DIRECT_CMD_MAIN_SETTINGS	0x84
+#define TRIGGER_VAL(x)			((x) << 25)
+#define CMD_LP_EN			BIT(24)
+#define CMD_SIZE(x)			((x) << 16)
+#define CMD_VCHAN_ID(x)			((x) << 14)
+#define CMD_DATATYPE(x)			((x) << 8)
+#define CMD_LONG			BIT(3)
+#define WRITE_CMD			0
+#define READ_CMD			1
+#define TE_REQ				4
+#define TRIGGER_REQ			5
+#define BTA_REQ				6
+
+#define DIRECT_CMD_STS			0x88
+#define DIRECT_CMD_STS_CTL		0x138
+#define DIRECT_CMD_STS_CLR		0x158
+#define DIRECT_CMD_STS_FLAG		0x178
+#define RCVD_ACK_VAL(val)		((val) >> 16)
+#define RCVD_TRIGGER_VAL(val)		(((val) & GENMASK(14, 11)) >> 11)
+#define READ_COMPLETED_WITH_ERR		BIT(10)
+#define BTA_FINISHED			BIT(9)
+#define BTA_COMPLETED			BIT(8)
+#define TE_RCVD				BIT(7)
+#define TRIGGER_RCVD			BIT(6)
+#define ACK_WITH_ERR_RCVD		BIT(5)
+#define ACK_RCVD			BIT(4)
+#define READ_COMPLETED			BIT(3)
+#define TRIGGER_COMPLETED		BIT(2)
+#define WRITE_COMPLETED			BIT(1)
+#define SENDING_CMD			BIT(0)
+
+#define DIRECT_CMD_STOP_READ		0x8c
+
+#define DIRECT_CMD_WRDATA		0x90
+
+#define DIRECT_CMD_FIFO_RST		0x94
+
+#define DIRECT_CMD_RDDATA		0xa0
+
+#define DIRECT_CMD_RD_PROPS		0xa4
+#define RD_DCS				BIT(18)
+#define RD_VCHAN_ID(val)		(((val) >> 16) & GENMASK(1, 0))
+#define RD_SIZE(val)			((val) & GENMASK(15, 0))
+
+#define DIRECT_CMD_RD_STS		0xa8
+#define DIRECT_CMD_RD_STS_CTL		0x13c
+#define DIRECT_CMD_RD_STS_CLR		0x15c
+#define DIRECT_CMD_RD_STS_FLAG		0x17c
+#define ERR_EOT_WITH_ERR		BIT(8)
+#define ERR_MISSING_EOT			BIT(7)
+#define ERR_WRONG_LENGTH		BIT(6)
+#define ERR_OVERSIZE			BIT(5)
+#define ERR_RECEIVE			BIT(4)
+#define ERR_UNDECODABLE			BIT(3)
+#define ERR_CHECKSUM			BIT(2)
+#define ERR_UNCORRECTABLE		BIT(1)
+#define ERR_FIXED			BIT(0)
+
+#define VID_MAIN_CTL			0xb0
+#define VID_IGNORE_MISS_VSYNC		BIT(31)
+#define VID_FIELD_SW			BIT(28)
+#define VID_INTERLACED_EN		BIT(27)
+#define RECOVERY_MODE(x)		((x) << 25)
+#define RECOVERY_MODE_NEXT_HSYNC	0
+#define RECOVERY_MODE_NEXT_STOP_POINT	2
+#define RECOVERY_MODE_NEXT_VSYNC	3
+#define REG_BLKEOL_MODE(x)		((x) << 23)
+#define REG_BLKLINE_MODE(x)		((x) << 21)
+#define REG_BLK_MODE_NULL_PKT		0
+#define REG_BLK_MODE_BLANKING_PKT	1
+#define REG_BLK_MODE_LP			2
+#define SYNC_PULSE_HORIZONTAL		BIT(20)
+#define SYNC_PULSE_ACTIVE		BIT(19)
+#define BURST_MODE			BIT(18)
+#define VID_PIXEL_MODE_MASK		GENMASK(17, 14)
+#define VID_PIXEL_MODE_RGB565		(0 << 14)
+#define VID_PIXEL_MODE_RGB666_PACKED	(1 << 14)
+#define VID_PIXEL_MODE_RGB666		(2 << 14)
+#define VID_PIXEL_MODE_RGB888		(3 << 14)
+#define VID_PIXEL_MODE_RGB101010	(4 << 14)
+#define VID_PIXEL_MODE_RGB121212	(5 << 14)
+#define VID_PIXEL_MODE_YUV420		(8 << 14)
+#define VID_PIXEL_MODE_YUV422_PACKED	(9 << 14)
+#define VID_PIXEL_MODE_YUV422		(10 << 14)
+#define VID_PIXEL_MODE_YUV422_24B	(11 << 14)
+#define VID_PIXEL_MODE_DSC_COMP		(12 << 14)
+#define VID_DATATYPE(x)			((x) << 8)
+#define VID_VIRTCHAN_ID(iface, x)	((x) << (4 + (iface) * 2))
+#define STOP_MODE(x)			((x) << 2)
+#define START_MODE(x)			(x)
+
+#define VID_VSIZE1			0xb4
+#define VFP_LEN(x)			((x) << 12)
+#define VBP_LEN(x)			((x) << 6)
+#define VSA_LEN(x)			(x)
+
+#define VID_VSIZE2			0xb8
+#define VACT_LEN(x)			(x)
+
+#define VID_HSIZE1			0xc0
+#define HBP_LEN(x)			((x) << 16)
+#define HSA_LEN(x)			(x)
+
+#define VID_HSIZE2			0xc4
+#define HFP_LEN(x)			((x) << 16)
+#define HACT_LEN(x)			(x)
+
+#define VID_BLKSIZE1			0xcc
+#define BLK_EOL_PKT_LEN(x)		((x) << 15)
+#define BLK_LINE_EVENT_PKT_LEN(x)	(x)
+
+#define VID_BLKSIZE2			0xd0
+#define BLK_LINE_PULSE_PKT_LEN(x)	(x)
+
+#define VID_PKT_TIME			0xd8
+#define BLK_EOL_DURATION(x)		(x)
+
+#define VID_DPHY_TIME			0xdc
+#define REG_WAKEUP_TIME(x)		((x) << 17)
+#define REG_LINE_DURATION(x)		(x)
+
+#define VID_ERR_COLOR1			0xe0
+#define COL_GREEN(x)			((x) << 12)
+#define COL_RED(x)			(x)
+
+#define VID_ERR_COLOR2			0xe4
+#define PAD_VAL(x)			((x) << 12)
+#define COL_BLUE(x)			(x)
+
+#define VID_VPOS			0xe8
+#define LINE_VAL(val)			(((val) & GENMASK(14, 2)) >> 2)
+#define LINE_POS(val)			((val) & GENMASK(1, 0))
+
+#define VID_HPOS			0xec
+#define HORIZ_VAL(val)			(((val) & GENMASK(17, 3)) >> 3)
+#define HORIZ_POS(val)			((val) & GENMASK(2, 0))
+
+#define VID_MODE_STS			0xf0
+#define VID_MODE_STS_CTL		0x140
+#define VID_MODE_STS_CLR		0x160
+#define VID_MODE_STS_FLAG		0x180
+#define VSG_RECOVERY			BIT(10)
+#define ERR_VRS_WRONG_LEN		BIT(9)
+#define ERR_LONG_READ			BIT(8)
+#define ERR_LINE_WRITE			BIT(7)
+#define ERR_BURST_WRITE			BIT(6)
+#define ERR_SMALL_HEIGHT		BIT(5)
+#define ERR_SMALL_LEN			BIT(4)
+#define ERR_MISSING_VSYNC		BIT(3)
+#define ERR_MISSING_HSYNC		BIT(2)
+#define ERR_MISSING_DATA		BIT(1)
+#define VSG_RUNNING			BIT(0)
+
+#define VID_VCA_SETTING1		0xf4
+#define BURST_LP			BIT(16)
+#define MAX_BURST_LIMIT(x)		(x)
+
+#define VID_VCA_SETTING2		0xf8
+#define MAX_LINE_LIMIT(x)		((x) << 16)
+#define EXACT_BURST_LIMIT(x)		(x)
+
+#define TVG_CTL				0xfc
+#define TVG_STRIPE_SIZE(x)		((x) << 5)
+#define TVG_MODE_MASK			GENMASK(4, 3)
+#define TVG_MODE_SINGLE_COLOR		(0 << 3)
+#define TVG_MODE_VSTRIPES		(2 << 3)
+#define TVG_MODE_HSTRIPES		(3 << 3)
+#define TVG_STOPMODE_MASK		GENMASK(2, 1)
+#define TVG_STOPMODE_EOF		(0 << 1)
+#define TVG_STOPMODE_EOL		(1 << 1)
+#define TVG_STOPMODE_NOW		(2 << 1)
+#define TVG_RUN				BIT(0)
+
+#define TVG_IMG_SIZE			0x100
+#define TVG_NBLINES(x)			((x) << 16)
+#define TVG_LINE_SIZE(x)		(x)
+
+#define TVG_COLOR1			0x104
+#define TVG_COL1_GREEN(x)		((x) << 12)
+#define TVG_COL1_RED(x)			(x)
+
+#define TVG_COLOR1_BIS			0x108
+#define TVG_COL1_BLUE(x)		(x)
+
+#define TVG_COLOR2			0x10c
+#define TVG_COL2_GREEN(x)		((x) << 12)
+#define TVG_COL2_RED(x)			(x)
+
+#define TVG_COLOR2_BIS			0x110
+#define TVG_COL2_BLUE(x)		(x)
+
+#define TVG_STS				0x114
+#define TVG_STS_CTL			0x144
+#define TVG_STS_CLR			0x164
+#define TVG_STS_FLAG			0x184
+#define TVG_STS_RUNNING			BIT(0)
+
+#define STS_CTL_EDGE(e)			((e) << 16)
+
+#define DPHY_LANES_MAP			0x198
+#define DAT_REMAP_CFG(b, l)		((l) << ((b) * 8))
+
+#define DPI_IRQ_EN			0x1a0
+#define DPI_IRQ_CLR			0x1a4
+#define DPI_IRQ_STS			0x1a8
+#define PIXEL_BUF_OVERFLOW		BIT(0)
+
+#define DPI_CFG				0x1ac
+#define DPI_CFG_FIFO_DEPTH(x)		((x) >> 16)
+#define DPI_CFG_FIFO_LEVEL(x)		((x) & GENMASK(15, 0))
+
+#define TEST_GENERIC			0x1f0
+#define TEST_STATUS(x)			((x) >> 16)
+#define TEST_CTRL(x)			(x)
+
+#define ID_REG				0x1fc
+#define REV_VENDOR_ID(x)		(((x) & GENMASK(31, 20)) >> 20)
+#define REV_PRODUCT_ID(x)		(((x) & GENMASK(19, 12)) >> 12)
+#define REV_HW(x)			(((x) & GENMASK(11, 8)) >> 8)
+#define REV_MAJOR(x)			(((x) & GENMASK(7, 4)) >> 4)
+#define REV_MINOR(x)			((x) & GENMASK(3, 0))
+
+#define DSI_OUTPUT_PORT			0
+#define DSI_INPUT_PORT(inputid)		(1 + (inputid))
+
+#define DSI_HBP_FRAME_OVERHEAD		12
+#define DSI_HSA_FRAME_OVERHEAD		14
+#define DSI_HFP_FRAME_OVERHEAD		6
+#define DSI_HSS_VSS_VSE_FRAME_OVERHEAD	4
+#define DSI_BLANKING_FRAME_OVERHEAD	6
+#define DSI_NULL_FRAME_OVERHEAD		6
+#define DSI_EOT_PKT_SIZE		4
+
+#define REG_WAKEUP_TIME_NS		800
+#define DPHY_PLL_RATE_HZ		108000000
+
+/* DPHY registers */
+#define DPHY_PMA_CMN(reg)		(reg)
+#define DPHY_PMA_LCLK(reg)		(0x100 + (reg))
+#define DPHY_PMA_LDATA(lane, reg)	(0x200 + ((lane) * 0x100) + (reg))
+#define DPHY_PMA_RCLK(reg)		(0x600 + (reg))
+#define DPHY_PMA_RDATA(lane, reg)	(0x700 + ((lane) * 0x100) + (reg))
+#define DPHY_PCS(reg)			(0xb00 + (reg))
+
+#define DPHY_CMN_SSM			DPHY_PMA_CMN(0x20)
+#define DPHY_CMN_SSM_EN			BIT(0)
+#define DPHY_CMN_TX_MODE_EN		BIT(9)
+
+#define DPHY_CMN_PWM			DPHY_PMA_CMN(0x40)
+#define DPHY_CMN_PWM_DIV(x)		((x) << 20)
+#define DPHY_CMN_PWM_LOW(x)		((x) << 10)
+#define DPHY_CMN_PWM_HIGH(x)		(x)
+
+#define DPHY_CMN_FBDIV			DPHY_PMA_CMN(0x4c)
+#define DPHY_CMN_FBDIV_VAL(low, high)	(((high) << 11) | ((low) << 22))
+#define DPHY_CMN_FBDIV_FROM_REG		(BIT(10) | BIT(21))
+
+#define DPHY_CMN_OPIPDIV		DPHY_PMA_CMN(0x50)
+#define DPHY_CMN_IPDIV_FROM_REG		BIT(0)
+#define DPHY_CMN_IPDIV(x)		((x) << 1)
+#define DPHY_CMN_OPDIV_FROM_REG		BIT(6)
+#define DPHY_CMN_OPDIV(x)		((x) << 7)
+
+#define DPHY_PSM_CFG			DPHY_PCS(0x4)
+#define DPHY_PSM_CFG_FROM_REG		BIT(0)
+#define DPHY_PSM_CLK_DIV(x)		((x) << 1)
+
+struct cdns_dsi_output {
+	struct mipi_dsi_device *dev;
+	struct drm_panel *panel;
+	struct drm_bridge *bridge;
+};
+
+enum cdns_dsi_input_id {
+	CDNS_SDI_INPUT,
+	CDNS_DPI_INPUT,
+	CDNS_DSC_INPUT,
+};
+
+struct cdns_dphy_cfg {
+	u8 pll_ipdiv;
+	u8 pll_opdiv;
+	u16 pll_fbdiv;
+	unsigned long lane_bps;
+	unsigned int nlanes;
+};
+
+struct cdns_dsi_cfg {
+	unsigned int hfp;
+	unsigned int hsa;
+	unsigned int hbp;
+	unsigned int hact;
+	unsigned int htotal;
+};
+
+struct cdns_dphy;
+
+enum cdns_dphy_clk_lane_cfg {
+	DPHY_CLK_CFG_LEFT_DRIVES_ALL = 0,
+	DPHY_CLK_CFG_LEFT_DRIVES_RIGHT = 1,
+	DPHY_CLK_CFG_LEFT_DRIVES_LEFT = 2,
+	DPHY_CLK_CFG_RIGHT_DRIVES_ALL = 3,
+};
+
+struct cdns_dphy_ops {
+	int (*probe)(struct cdns_dphy *dphy);
+	void (*remove)(struct cdns_dphy *dphy);
+	void (*set_psm_div)(struct cdns_dphy *dphy, u8 div);
+	void (*set_clk_lane_cfg)(struct cdns_dphy *dphy,
+				 enum cdns_dphy_clk_lane_cfg cfg);
+	void (*set_pll_cfg)(struct cdns_dphy *dphy,
+			    const struct cdns_dphy_cfg *cfg);
+	unsigned long (*get_wakeup_time_ns)(struct cdns_dphy *dphy);
+};
+
+struct cdns_dphy {
+	struct cdns_dphy_cfg cfg;
+	void __iomem *regs;
+	struct clk *psm_clk;
+	struct clk *pll_ref_clk;
+	const struct cdns_dphy_ops *ops;
+};
+
+struct cdns_dsi_input {
+	enum cdns_dsi_input_id id;
+	struct drm_bridge bridge;
+};
+
+struct cdns_dsi {
+	struct mipi_dsi_host base;
+	void __iomem *regs;
+	struct cdns_dsi_input input;
+	struct cdns_dsi_output output;
+	unsigned int direct_cmd_fifo_depth;
+	unsigned int rx_fifo_depth;
+	struct completion direct_cmd_comp;
+	struct clk *dsi_p_clk;
+	struct reset_control *dsi_p_rst;
+	struct clk *dsi_sys_clk;
+	bool link_initialized;
+	struct cdns_dphy *dphy;
+};
+
+static inline struct cdns_dsi *input_to_dsi(struct cdns_dsi_input *input)
+{
+	return container_of(input, struct cdns_dsi, input);
+}
+
+static inline struct cdns_dsi *to_cdns_dsi(struct mipi_dsi_host *host)
+{
+	return container_of(host, struct cdns_dsi, base);
+}
+
+static inline struct cdns_dsi_input *
+bridge_to_cdns_dsi_input(struct drm_bridge *bridge)
+{
+	return container_of(bridge, struct cdns_dsi_input, bridge);
+}
+
+static int cdns_dsi_get_dphy_pll_cfg(struct cdns_dphy *dphy,
+				     struct cdns_dphy_cfg *cfg,
+				     unsigned int dpi_htotal,
+				     unsigned int dpi_bpp,
+				     unsigned int dpi_hz,
+				     unsigned int dsi_htotal,
+				     unsigned int dsi_nlanes,
+				     unsigned int *dsi_hfp_ext)
+{
+	u64 dlane_bps, dlane_bps_max, fbdiv, fbdiv_max, adj_dsi_htotal;
+	unsigned long pll_ref_hz = clk_get_rate(dphy->pll_ref_clk);
+
+	memset(cfg, 0, sizeof(*cfg));
+
+	cfg->nlanes = dsi_nlanes;
+
+	if (pll_ref_hz < 9600000 || pll_ref_hz >= 150000000)
+		return -EINVAL;
+	else if (pll_ref_hz < 19200000)
+		cfg->pll_ipdiv = 1;
+	else if (pll_ref_hz < 38400000)
+		cfg->pll_ipdiv = 2;
+	else if (pll_ref_hz < 76800000)
+		cfg->pll_ipdiv = 4;
+	else
+		cfg->pll_ipdiv = 8;
+
+	/*
+	 * Make sure DSI htotal is aligned on a lane boundary when calculating
+	 * the expected data rate. This is done by extending HFP in case of
+	 * misalignment.
+	 */
+	adj_dsi_htotal = dsi_htotal;
+	if (dsi_htotal % dsi_nlanes)
+		adj_dsi_htotal += dsi_nlanes - (dsi_htotal % dsi_nlanes);
+
+	dlane_bps = (u64)dpi_hz * adj_dsi_htotal;
+
+	/* data rate in bytes/sec is not an integer, refuse the mode. */
+	if (do_div(dlane_bps, dsi_nlanes * dpi_htotal))
+		return -EINVAL;
+
+	/* data rate was in bytes/sec, convert to bits/sec. */
+	dlane_bps *= 8;
+
+	if (dlane_bps > 2500000000UL || dlane_bps < 160000000UL)
+		return -EINVAL;
+	else if (dlane_bps >= 1250000000)
+		cfg->pll_opdiv = 1;
+	else if (dlane_bps >= 630000000)
+		cfg->pll_opdiv = 2;
+	else if (dlane_bps >= 320000000)
+		cfg->pll_opdiv = 4;
+	else if (dlane_bps >= 160000000)
+		cfg->pll_opdiv = 8;
+
+	/*
+	 * Allow a deviation of 0.2% on the per-lane data rate to try to
+	 * recover a potential mismatch between DPI and PPI clks.
+	 */
+	dlane_bps_max = dlane_bps + DIV_ROUND_DOWN_ULL(dlane_bps, 500);
+	fbdiv_max = DIV_ROUND_DOWN_ULL(dlane_bps_max * 2 *
+				       cfg->pll_opdiv * cfg->pll_ipdiv,
+				       pll_ref_hz);
+	fbdiv = DIV_ROUND_UP_ULL(dlane_bps * 2 * cfg->pll_opdiv *
+				 cfg->pll_ipdiv,
+				 pll_ref_hz);
+
+	/*
+	 * Iterate over all acceptable fbdiv and try to find an adjusted DSI
+	 * htotal length providing an exact match.
+	 *
+	 * Note that we could do something even trickier by relying on the fact
+	 * that a new line is not necessarily aligned on a lane boundary, so,
+	 * by making adj_dsi_htotal non aligned on a dsi_lanes we can improve a
+	 * bit the precision. With this, the step would be
+	 *
+	 *	pll_ref_hz / (2 * opdiv * ipdiv * nlanes)
+	 *
+	 * instead of
+	 *
+	 *	pll_ref_hz / (2 * opdiv * ipdiv)
+	 *
+	 * The drawback of this approach is that we would need to make sure the
+	 * number or lines is a multiple of the realignment periodicity which is
+	 * a function of the number of lanes and the original misalignment. For
+	 * example, for NLANES = 4 and HTOTAL % NLANES = 3, it takes 4 lines
+	 * to realign on a lane:
+	 * LINE 0: expected number of bytes, starts emitting first byte of
+	 *	   LINE 1 on LANE 3
+	 * LINE 1: expected number of bytes, starts emitting first 2 bytes of
+	 *	   LINE 2 on LANES 2 and 3
+	 * LINE 2: expected number of bytes, starts emitting first 3 bytes of
+	 *	   of LINE 3 on LANES 1, 2 and 3
+	 * LINE 3: one byte less, now things are realigned on LANE 0 for LINE 4
+	 *
+	 * I figured this extra complexity was not worth the benefit, but if
+	 * someone really has unfixable mismatch, that would be something to
+	 * investigate.
+	 */
+	for (; fbdiv <= fbdiv_max; fbdiv++) {
+		u32 rem;
+
+		adj_dsi_htotal = (u64)fbdiv * pll_ref_hz * dsi_nlanes *
+				 dpi_htotal;
+
+		/*
+		 * Do the division in 2 steps to avoid an overflow on the
+		 * divider.
+		 */
+		rem = do_div(adj_dsi_htotal, dpi_hz);
+		if (rem)
+			continue;
+
+		rem = do_div(adj_dsi_htotal,
+			     cfg->pll_opdiv * cfg->pll_ipdiv * 2 * 8);
+		if (rem)
+			continue;
+
+		cfg->pll_fbdiv = fbdiv;
+		*dsi_hfp_ext = adj_dsi_htotal - dsi_htotal;
+		break;
+	}
+
+	/* No match, let's just reject the display mode. */
+	if (!cfg->pll_fbdiv)
+		return -EINVAL;
+
+	dlane_bps = DIV_ROUND_DOWN_ULL((u64)dpi_hz * adj_dsi_htotal * 8,
+				       dsi_nlanes * dpi_htotal);
+	cfg->lane_bps = dlane_bps;
+
+	return 0;
+}
+
+static int cdns_dphy_setup_psm(struct cdns_dphy *dphy)
+{
+	unsigned long psm_clk_hz = clk_get_rate(dphy->psm_clk);
+	unsigned long psm_div;
+
+	if (!psm_clk_hz || psm_clk_hz > 100000000)
+		return -EINVAL;
+
+	psm_div = DIV_ROUND_CLOSEST(psm_clk_hz, 1000000);
+	if (dphy->ops->set_psm_div)
+		dphy->ops->set_psm_div(dphy, psm_div);
+
+	return 0;
+}
+
+static void cdns_dphy_set_clk_lane_cfg(struct cdns_dphy *dphy,
+				       enum cdns_dphy_clk_lane_cfg cfg)
+{
+	if (dphy->ops->set_clk_lane_cfg)
+		dphy->ops->set_clk_lane_cfg(dphy, cfg);
+}
+
+static void cdns_dphy_set_pll_cfg(struct cdns_dphy *dphy,
+				  const struct cdns_dphy_cfg *cfg)
+{
+	if (dphy->ops->set_pll_cfg)
+		dphy->ops->set_pll_cfg(dphy, cfg);
+}
+
+static unsigned long cdns_dphy_get_wakeup_time_ns(struct cdns_dphy *dphy)
+{
+	return dphy->ops->get_wakeup_time_ns(dphy);
+}
+
+static unsigned int dpi_to_dsi_timing(unsigned int dpi_timing,
+				      unsigned int dpi_bpp,
+				      unsigned int dsi_pkt_overhead)
+{
+	unsigned int dsi_timing = DIV_ROUND_UP(dpi_timing * dpi_bpp, 8);
+
+	if (dsi_timing < dsi_pkt_overhead)
+		dsi_timing = 0;
+	else
+		dsi_timing -= dsi_pkt_overhead;
+
+	return dsi_timing;
+}
+
+static int cdns_dsi_mode2cfg(struct cdns_dsi *dsi,
+			     const struct drm_display_mode *mode,
+			     struct cdns_dsi_cfg *dsi_cfg,
+			     struct cdns_dphy_cfg *dphy_cfg,
+			     bool mode_valid_check)
+{
+	unsigned long dsi_htotal = 0, dsi_hss_hsa_hse_hbp = 0;
+	struct cdns_dsi_output *output = &dsi->output;
+	unsigned int dsi_hfp_ext = 0, dpi_hfp, tmp;
+	bool sync_pulse = false;
+	int bpp, nlanes, ret;
+
+	memset(dsi_cfg, 0, sizeof(*dsi_cfg));
+
+	if (output->dev->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE)
+		sync_pulse = true;
+
+	bpp = mipi_dsi_pixel_format_to_bpp(output->dev->format);
+	nlanes = output->dev->lanes;
+
+	if (mode_valid_check)
+		tmp = mode->htotal -
+		      (sync_pulse ? mode->hsync_end : mode->hsync_start);
+	else
+		tmp = mode->crtc_htotal -
+		      (sync_pulse ?
+		       mode->crtc_hsync_end : mode->crtc_hsync_start);
+
+	dsi_cfg->hbp = dpi_to_dsi_timing(tmp, bpp, DSI_HBP_FRAME_OVERHEAD);
+	dsi_htotal += dsi_cfg->hbp + DSI_HBP_FRAME_OVERHEAD;
+	dsi_hss_hsa_hse_hbp += dsi_cfg->hbp + DSI_HBP_FRAME_OVERHEAD;
+
+	if (sync_pulse) {
+		if (mode_valid_check)
+			tmp = mode->hsync_end - mode->hsync_start;
+		else
+			tmp = mode->crtc_hsync_end - mode->crtc_hsync_start;
+
+		dsi_cfg->hsa = dpi_to_dsi_timing(tmp, bpp,
+						 DSI_HSA_FRAME_OVERHEAD);
+		dsi_htotal += dsi_cfg->hsa + DSI_HSA_FRAME_OVERHEAD;
+		dsi_hss_hsa_hse_hbp += dsi_cfg->hsa + DSI_HSA_FRAME_OVERHEAD;
+	}
+
+	dsi_cfg->hact = dpi_to_dsi_timing(mode_valid_check ?
+					  mode->hdisplay : mode->crtc_hdisplay,
+					  bpp, 0);
+	dsi_htotal += dsi_cfg->hact;
+
+	if (mode_valid_check)
+		dpi_hfp = mode->hsync_start - mode->hdisplay;
+	else
+		dpi_hfp = mode->crtc_hsync_start - mode->crtc_hdisplay;
+
+	dsi_cfg->hfp = dpi_to_dsi_timing(dpi_hfp, bpp, DSI_HFP_FRAME_OVERHEAD);
+	dsi_htotal += dsi_cfg->hfp + DSI_HFP_FRAME_OVERHEAD;
+
+	if (mode_valid_check)
+		ret = cdns_dsi_get_dphy_pll_cfg(dsi->dphy, dphy_cfg,
+						mode->htotal, bpp,
+						mode->clock * 1000,
+						dsi_htotal, nlanes,
+						&dsi_hfp_ext);
+	else
+		ret = cdns_dsi_get_dphy_pll_cfg(dsi->dphy, dphy_cfg,
+						mode->crtc_htotal, bpp,
+						mode->crtc_clock * 1000,
+						dsi_htotal, nlanes,
+						&dsi_hfp_ext);
+
+	if (ret)
+		return ret;
+
+	dsi_cfg->hfp += dsi_hfp_ext;
+	dsi_htotal += dsi_hfp_ext;
+	dsi_cfg->htotal = dsi_htotal;
+
+	/*
+	 * Make sure DPI(HFP) > DSI(HSS+HSA+HSE+HBP) to guarantee that the FIFO
+	 * is empty before we start a receiving a new line on the DPI
+	 * interface.
+	 */
+	if ((u64)dphy_cfg->lane_bps * dpi_hfp * nlanes <
+	    (u64)dsi_hss_hsa_hse_hbp *
+	    (mode_valid_check ? mode->clock : mode->crtc_clock) * 1000)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int cdns_dsi_bridge_attach(struct drm_bridge *bridge)
+{
+	struct cdns_dsi_input *input = bridge_to_cdns_dsi_input(bridge);
+	struct cdns_dsi *dsi = input_to_dsi(input);
+	struct cdns_dsi_output *output = &dsi->output;
+
+	if (!drm_core_check_feature(bridge->dev, DRIVER_ATOMIC)) {
+		dev_err(dsi->base.dev,
+			"cdns-dsi driver is only compatible with DRM devices supporting atomic updates");
+		return -ENOTSUPP;
+	}
+
+	return drm_bridge_attach(bridge->encoder, output->bridge, bridge);
+}
+
+static enum drm_mode_status
+cdns_dsi_bridge_mode_valid(struct drm_bridge *bridge,
+			   const struct drm_display_mode *mode)
+{
+	struct cdns_dsi_input *input = bridge_to_cdns_dsi_input(bridge);
+	struct cdns_dsi *dsi = input_to_dsi(input);
+	struct cdns_dsi_output *output = &dsi->output;
+	struct cdns_dphy_cfg dphy_cfg;
+	struct cdns_dsi_cfg dsi_cfg;
+	int bpp, nlanes, ret;
+
+	/*
+	 * VFP_DSI should be less than VFP_DPI and VFP_DSI should be at
+	 * least 1.
+	 */
+	if (mode->vtotal - mode->vsync_end < 2)
+		return MODE_V_ILLEGAL;
+
+	/* VSA_DSI = VSA_DPI and must be at least 2. */
+	if (mode->vsync_end - mode->vsync_start < 2)
+		return MODE_V_ILLEGAL;
+
+	/* HACT must be 32-bits aligned. */
+	bpp = mipi_dsi_pixel_format_to_bpp(output->dev->format);
+	if ((mode->hdisplay * bpp) % 32)
+		return MODE_H_ILLEGAL;
+
+	nlanes = output->dev->lanes;
+
+	ret = cdns_dsi_mode2cfg(dsi, mode, &dsi_cfg, &dphy_cfg, true);
+	if (ret)
+		return MODE_CLOCK_RANGE;
+
+	return MODE_OK;
+}
+
+static void cdns_dsi_bridge_disable(struct drm_bridge *bridge)
+{
+	struct cdns_dsi_input *input = bridge_to_cdns_dsi_input(bridge);
+	struct cdns_dsi *dsi = input_to_dsi(input);
+	u32 val;
+
+	val = readl(dsi->regs + MCTL_MAIN_DATA_CTL);
+	val &= ~(IF_VID_SELECT_MASK | IF_VID_MODE | VID_EN | HOST_EOT_GEN |
+		 DISP_EOT_GEN);
+	writel(val, dsi->regs + MCTL_MAIN_DATA_CTL);
+
+	val = readl(dsi->regs + MCTL_MAIN_EN) & ~IF_EN(input->id);
+	writel(val, dsi->regs + MCTL_MAIN_EN);
+	pm_runtime_put(dsi->base.dev);
+}
+
+static void cdns_dsi_hs_init(struct cdns_dsi *dsi,
+			     const struct cdns_dphy_cfg *dphy_cfg)
+{
+	u32 status;
+
+	/*
+	 * Power all internal DPHY blocks down and maintain their reset line
+	 * asserted before changing the DPHY config.
+	 */
+	writel(DPHY_CMN_PSO | DPHY_PLL_PSO | DPHY_ALL_D_PDN | DPHY_C_PDN |
+	       DPHY_CMN_PDN | DPHY_PLL_PDN,
+	       dsi->regs + MCTL_DPHY_CFG0);
+
+	/*
+	 * Configure the internal PSM clk divider so that the DPHY has a
+	 * 1MHz clk (or something close).
+	 */
+	WARN_ON_ONCE(cdns_dphy_setup_psm(dsi->dphy));
+
+	/*
+	 * Configure attach clk lanes to data lanes: the DPHY has 2 clk lanes
+	 * and 8 data lanes, each clk lane can be attache different set of
+	 * data lanes. The 2 groups are named 'left' and 'right', so here we
+	 * just say that we want the 'left' clk lane to drive the 'left' data
+	 * lanes.
+	 */
+	cdns_dphy_set_clk_lane_cfg(dsi->dphy, DPHY_CLK_CFG_LEFT_DRIVES_LEFT);
+
+	/*
+	 * Configure the DPHY PLL that will be used to generate the TX byte
+	 * clk.
+	 */
+	cdns_dphy_set_pll_cfg(dsi->dphy, dphy_cfg);
+
+	/* Start TX state machine. */
+	writel(DPHY_CMN_SSM_EN | DPHY_CMN_TX_MODE_EN,
+	       dsi->dphy->regs + DPHY_CMN_SSM);
+
+	/* Activate the PLL and wait until it's locked. */
+	writel(PLL_LOCKED, dsi->regs + MCTL_MAIN_STS_CLR);
+	writel(DPHY_CMN_PSO | DPHY_ALL_D_PDN | DPHY_C_PDN | DPHY_CMN_PDN,
+	       dsi->regs + MCTL_DPHY_CFG0);
+	WARN_ON_ONCE(readl_poll_timeout(dsi->regs + MCTL_MAIN_STS, status,
+					status & PLL_LOCKED, 100, 100));
+	/* De-assert data and clock reset lines. */
+	writel(DPHY_CMN_PSO | DPHY_ALL_D_PDN | DPHY_C_PDN | DPHY_CMN_PDN |
+	       DPHY_D_RSTB(dphy_cfg->nlanes) | DPHY_C_RSTB,
+	       dsi->regs + MCTL_DPHY_CFG0);
+}
+
+static void cdns_dsi_init_link(struct cdns_dsi *dsi)
+{
+	struct cdns_dsi_output *output = &dsi->output;
+	unsigned long sysclk_period, ulpout;
+	u32 val;
+	int i;
+
+	if (dsi->link_initialized)
+		return;
+
+	val = 0;
+	for (i = 1; i < output->dev->lanes; i++)
+		val |= DATA_LANE_EN(i);
+
+	if (!(output->dev->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS))
+		val |= CLK_CONTINUOUS;
+
+	writel(val, dsi->regs + MCTL_MAIN_PHY_CTL);
+
+	/* ULPOUT should be set to 1ms and is expressed in sysclk cycles. */
+	sysclk_period = NSEC_PER_SEC / clk_get_rate(dsi->dsi_sys_clk);
+	ulpout = DIV_ROUND_UP(NSEC_PER_MSEC, sysclk_period);
+	writel(CLK_LANE_ULPOUT_TIME(ulpout) | DATA_LANE_ULPOUT_TIME(ulpout),
+	       dsi->regs + MCTL_ULPOUT_TIME);
+
+	writel(LINK_EN, dsi->regs + MCTL_MAIN_DATA_CTL);
+
+	val = CLK_LANE_EN | PLL_START;
+	for (i = 0; i < output->dev->lanes; i++)
+		val |= DATA_LANE_START(i);
+
+	writel(val, dsi->regs + MCTL_MAIN_EN);
+
+	dsi->link_initialized = true;
+}
+
+static void cdns_dsi_bridge_enable(struct drm_bridge *bridge)
+{
+	struct cdns_dsi_input *input = bridge_to_cdns_dsi_input(bridge);
+	struct cdns_dsi *dsi = input_to_dsi(input);
+	struct cdns_dsi_output *output = &dsi->output;
+	struct drm_display_mode *mode;
+	struct cdns_dphy_cfg dphy_cfg;
+	unsigned long tx_byte_period;
+	struct cdns_dsi_cfg dsi_cfg;
+	u32 tmp, reg_wakeup, div;
+	int bpp, nlanes;
+
+	if (WARN_ON(pm_runtime_get_sync(dsi->base.dev) < 0))
+		return;
+
+	mode = &bridge->encoder->crtc->state->adjusted_mode;
+	bpp = mipi_dsi_pixel_format_to_bpp(output->dev->format);
+	nlanes = output->dev->lanes;
+
+	WARN_ON_ONCE(cdns_dsi_mode2cfg(dsi, mode, &dsi_cfg, &dphy_cfg, false));
+
+	cdns_dsi_hs_init(dsi, &dphy_cfg);
+	cdns_dsi_init_link(dsi);
+
+	writel(HBP_LEN(dsi_cfg.hbp) | HSA_LEN(dsi_cfg.hsa),
+	       dsi->regs + VID_HSIZE1);
+	writel(HFP_LEN(dsi_cfg.hfp) | HACT_LEN(dsi_cfg.hact),
+	       dsi->regs + VID_HSIZE2);
+
+	writel(VBP_LEN(mode->crtc_vtotal - mode->crtc_vsync_end - 1) |
+	       VFP_LEN(mode->crtc_vsync_start - mode->crtc_vdisplay) |
+	       VSA_LEN(mode->crtc_vsync_end - mode->crtc_vsync_start + 1),
+	       dsi->regs + VID_VSIZE1);
+	writel(mode->crtc_vdisplay, dsi->regs + VID_VSIZE2);
+
+	tmp = dsi_cfg.htotal -
+	      (dsi_cfg.hsa + DSI_BLANKING_FRAME_OVERHEAD +
+	       DSI_HSA_FRAME_OVERHEAD);
+	writel(BLK_LINE_PULSE_PKT_LEN(tmp), dsi->regs + VID_BLKSIZE2);
+	if (output->dev->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE)
+		writel(MAX_LINE_LIMIT(tmp - DSI_NULL_FRAME_OVERHEAD),
+		       dsi->regs + VID_VCA_SETTING2);
+
+	tmp = dsi_cfg.htotal -
+	      (DSI_HSS_VSS_VSE_FRAME_OVERHEAD + DSI_BLANKING_FRAME_OVERHEAD);
+	writel(BLK_LINE_EVENT_PKT_LEN(tmp), dsi->regs + VID_BLKSIZE1);
+	if (!(output->dev->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE))
+		writel(MAX_LINE_LIMIT(tmp - DSI_NULL_FRAME_OVERHEAD),
+		       dsi->regs + VID_VCA_SETTING2);
+
+	tmp = DIV_ROUND_UP(dsi_cfg.htotal, nlanes) -
+	      DIV_ROUND_UP(dsi_cfg.hsa, nlanes);
+
+	if (!(output->dev->mode_flags & MIPI_DSI_MODE_EOT_PACKET))
+		tmp -= DIV_ROUND_UP(DSI_EOT_PKT_SIZE, nlanes);
+
+	tx_byte_period = DIV_ROUND_DOWN_ULL((u64)NSEC_PER_SEC * 8,
+					    dphy_cfg.lane_bps);
+	reg_wakeup = cdns_dphy_get_wakeup_time_ns(dsi->dphy) /
+		     tx_byte_period;
+	writel(REG_WAKEUP_TIME(reg_wakeup) | REG_LINE_DURATION(tmp),
+	       dsi->regs + VID_DPHY_TIME);
+
+	/*
+	 * HSTX and LPRX timeouts are both expressed in TX byte clk cycles and
+	 * both should be set to at least the time it takes to transmit a
+	 * frame.
+	 */
+	tmp = NSEC_PER_SEC / drm_mode_vrefresh(mode);
+	tmp /= tx_byte_period;
+
+	for (div = 0; div <= CLK_DIV_MAX; div++) {
+		if (tmp <= HSTX_TIMEOUT_MAX)
+			break;
+
+		tmp >>= 1;
+	}
+
+	if (tmp > HSTX_TIMEOUT_MAX)
+		tmp = HSTX_TIMEOUT_MAX;
+
+	writel(CLK_DIV(div) | HSTX_TIMEOUT(tmp),
+	       dsi->regs + MCTL_DPHY_TIMEOUT1);
+
+	writel(LPRX_TIMEOUT(tmp), dsi->regs + MCTL_DPHY_TIMEOUT2);
+
+	if (output->dev->mode_flags & MIPI_DSI_MODE_VIDEO) {
+		switch (output->dev->format) {
+		case MIPI_DSI_FMT_RGB888:
+			tmp = VID_PIXEL_MODE_RGB888 |
+			      VID_DATATYPE(MIPI_DSI_PACKED_PIXEL_STREAM_24);
+			break;
+
+		case MIPI_DSI_FMT_RGB666:
+			tmp = VID_PIXEL_MODE_RGB666 |
+			      VID_DATATYPE(MIPI_DSI_PIXEL_STREAM_3BYTE_18);
+			break;
+
+		case MIPI_DSI_FMT_RGB666_PACKED:
+			tmp = VID_PIXEL_MODE_RGB666_PACKED |
+			      VID_DATATYPE(MIPI_DSI_PACKED_PIXEL_STREAM_18);
+			break;
+
+		case MIPI_DSI_FMT_RGB565:
+			tmp = VID_PIXEL_MODE_RGB565 |
+			      VID_DATATYPE(MIPI_DSI_PACKED_PIXEL_STREAM_16);
+			break;
+
+		default:
+			dev_err(dsi->base.dev, "Unsupported DSI format\n");
+			return;
+		}
+
+		if (output->dev->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE)
+			tmp |= SYNC_PULSE_ACTIVE | SYNC_PULSE_HORIZONTAL;
+
+		tmp |= REG_BLKLINE_MODE(REG_BLK_MODE_BLANKING_PKT) |
+		       REG_BLKEOL_MODE(REG_BLK_MODE_BLANKING_PKT) |
+		       RECOVERY_MODE(RECOVERY_MODE_NEXT_HSYNC) |
+		       VID_IGNORE_MISS_VSYNC;
+
+		writel(tmp, dsi->regs + VID_MAIN_CTL);
+	}
+
+	tmp = readl(dsi->regs + MCTL_MAIN_DATA_CTL);
+	tmp &= ~(IF_VID_SELECT_MASK | HOST_EOT_GEN | IF_VID_MODE);
+
+	if (!(output->dev->mode_flags & MIPI_DSI_MODE_EOT_PACKET))
+		tmp |= HOST_EOT_GEN;
+
+	if (output->dev->mode_flags & MIPI_DSI_MODE_VIDEO)
+		tmp |= IF_VID_MODE | IF_VID_SELECT(input->id) | VID_EN;
+
+	writel(tmp, dsi->regs + MCTL_MAIN_DATA_CTL);
+
+	tmp = readl(dsi->regs + MCTL_MAIN_EN) | IF_EN(input->id);
+	writel(tmp, dsi->regs + MCTL_MAIN_EN);
+}
+
+static const struct drm_bridge_funcs cdns_dsi_bridge_funcs = {
+	.attach = cdns_dsi_bridge_attach,
+	.mode_valid = cdns_dsi_bridge_mode_valid,
+	.disable = cdns_dsi_bridge_disable,
+	.enable = cdns_dsi_bridge_enable,
+};
+
+static int cdns_dsi_attach(struct mipi_dsi_host *host,
+			   struct mipi_dsi_device *dev)
+{
+	struct cdns_dsi *dsi = to_cdns_dsi(host);
+	struct cdns_dsi_output *output = &dsi->output;
+	struct cdns_dsi_input *input = &dsi->input;
+	struct drm_bridge *bridge;
+	struct drm_panel *panel;
+	struct device_node *np;
+	int ret;
+
+	/*
+	 * We currently do not support connecting several DSI devices to the
+	 * same host. In order to support that we'd need the DRM bridge
+	 * framework to allow dynamic reconfiguration of the bridge chain.
+	 */
+	if (output->dev)
+		return -EBUSY;
+
+	/* We do not support burst mode yet. */
+	if (dev->mode_flags & MIPI_DSI_MODE_VIDEO_BURST)
+		return -ENOTSUPP;
+
+	/*
+	 * The host <-> device link might be described using an OF-graph
+	 * representation, in this case we extract the device of_node from
+	 * this representation, otherwise we use dsidev->dev.of_node which
+	 * should have been filled by the core.
+	 */
+	np = of_graph_get_remote_node(dsi->base.dev->of_node, DSI_OUTPUT_PORT,
+				      dev->channel);
+	if (!np)
+		np = of_node_get(dev->dev.of_node);
+
+	panel = of_drm_find_panel(np);
+	if (!IS_ERR(panel)) {
+		bridge = drm_panel_bridge_add(panel, DRM_MODE_CONNECTOR_DSI);
+	} else {
+		bridge = of_drm_find_bridge(dev->dev.of_node);
+		if (!bridge)
+			bridge = ERR_PTR(-EINVAL);
+	}
+
+	of_node_put(np);
+
+	if (IS_ERR(bridge)) {
+		ret = PTR_ERR(bridge);
+		dev_err(host->dev, "failed to add DSI device %s (err = %d)",
+			dev->name, ret);
+		return ret;
+	}
+
+	output->dev = dev;
+	output->bridge = bridge;
+	output->panel = panel;
+
+	/*
+	 * The DSI output has been properly configured, we can now safely
+	 * register the input to the bridge framework so that it can take place
+	 * in a display pipeline.
+	 */
+	drm_bridge_add(&input->bridge);
+
+	return 0;
+}
+
+static int cdns_dsi_detach(struct mipi_dsi_host *host,
+			   struct mipi_dsi_device *dev)
+{
+	struct cdns_dsi *dsi = to_cdns_dsi(host);
+	struct cdns_dsi_output *output = &dsi->output;
+	struct cdns_dsi_input *input = &dsi->input;
+
+	drm_bridge_remove(&input->bridge);
+	if (output->panel)
+		drm_panel_bridge_remove(output->bridge);
+
+	return 0;
+}
+
+static irqreturn_t cdns_dsi_interrupt(int irq, void *data)
+{
+	struct cdns_dsi *dsi = data;
+	irqreturn_t ret = IRQ_NONE;
+	u32 flag, ctl;
+
+	flag = readl(dsi->regs + DIRECT_CMD_STS_FLAG);
+	if (flag) {
+		ctl = readl(dsi->regs + DIRECT_CMD_STS_CTL);
+		ctl &= ~flag;
+		writel(ctl, dsi->regs + DIRECT_CMD_STS_CTL);
+		complete(&dsi->direct_cmd_comp);
+		ret = IRQ_HANDLED;
+	}
+
+	return ret;
+}
+
+static ssize_t cdns_dsi_transfer(struct mipi_dsi_host *host,
+				 const struct mipi_dsi_msg *msg)
+{
+	struct cdns_dsi *dsi = to_cdns_dsi(host);
+	u32 cmd, sts, val, wait = WRITE_COMPLETED, ctl = 0;
+	struct mipi_dsi_packet packet;
+	int ret, i, tx_len, rx_len;
+
+	ret = pm_runtime_get_sync(host->dev);
+	if (ret < 0)
+		return ret;
+
+	cdns_dsi_init_link(dsi);
+
+	ret = mipi_dsi_create_packet(&packet, msg);
+	if (ret)
+		goto out;
+
+	tx_len = msg->tx_buf ? msg->tx_len : 0;
+	rx_len = msg->rx_buf ? msg->rx_len : 0;
+
+	/* For read operations, the maximum TX len is 2. */
+	if (rx_len && tx_len > 2) {
+		ret = -ENOTSUPP;
+		goto out;
+	}
+
+	/* TX len is limited by the CMD FIFO depth. */
+	if (tx_len > dsi->direct_cmd_fifo_depth) {
+		ret = -ENOTSUPP;
+		goto out;
+	}
+
+	/* RX len is limited by the RX FIFO depth. */
+	if (rx_len > dsi->rx_fifo_depth) {
+		ret = -ENOTSUPP;
+		goto out;
+	}
+
+	cmd = CMD_SIZE(tx_len) | CMD_VCHAN_ID(msg->channel) |
+	      CMD_DATATYPE(msg->type);
+
+	if (msg->flags & MIPI_DSI_MSG_USE_LPM)
+		cmd |= CMD_LP_EN;
+
+	if (mipi_dsi_packet_format_is_long(msg->type))
+		cmd |= CMD_LONG;
+
+	if (rx_len) {
+		cmd |= READ_CMD;
+		wait = READ_COMPLETED_WITH_ERR | READ_COMPLETED;
+		ctl = READ_EN | BTA_EN;
+	} else if (msg->flags & MIPI_DSI_MSG_REQ_ACK) {
+		cmd |= BTA_REQ;
+		wait = ACK_WITH_ERR_RCVD | ACK_RCVD;
+		ctl = BTA_EN;
+	}
+
+	writel(readl(dsi->regs + MCTL_MAIN_DATA_CTL) | ctl,
+	       dsi->regs + MCTL_MAIN_DATA_CTL);
+
+	writel(cmd, dsi->regs + DIRECT_CMD_MAIN_SETTINGS);
+
+	for (i = 0; i < tx_len; i += 4) {
+		const u8 *buf = msg->tx_buf;
+		int j;
+
+		val = 0;
+		for (j = 0; j < 4 && j + i < tx_len; j++)
+			val |= (u32)buf[i + j] << (8 * j);
+
+		writel(val, dsi->regs + DIRECT_CMD_WRDATA);
+	}
+
+	/* Clear status flags before sending the command. */
+	writel(wait, dsi->regs + DIRECT_CMD_STS_CLR);
+	writel(wait, dsi->regs + DIRECT_CMD_STS_CTL);
+	reinit_completion(&dsi->direct_cmd_comp);
+	writel(0, dsi->regs + DIRECT_CMD_SEND);
+
+	wait_for_completion_timeout(&dsi->direct_cmd_comp,
+				    msecs_to_jiffies(1000));
+
+	sts = readl(dsi->regs + DIRECT_CMD_STS);
+	writel(wait, dsi->regs + DIRECT_CMD_STS_CLR);
+	writel(0, dsi->regs + DIRECT_CMD_STS_CTL);
+
+	writel(readl(dsi->regs + MCTL_MAIN_DATA_CTL) & ~ctl,
+	       dsi->regs + MCTL_MAIN_DATA_CTL);
+
+	/* We did not receive the events we were waiting for. */
+	if (!(sts & wait)) {
+		ret = -ETIMEDOUT;
+		goto out;
+	}
+
+	/* 'READ' or 'WRITE with ACK' failed. */
+	if (sts & (READ_COMPLETED_WITH_ERR | ACK_WITH_ERR_RCVD)) {
+		ret = -EIO;
+		goto out;
+	}
+
+	for (i = 0; i < rx_len; i += 4) {
+		u8 *buf = msg->rx_buf;
+		int j;
+
+		val = readl(dsi->regs + DIRECT_CMD_RDDATA);
+		for (j = 0; j < 4 && j + i < rx_len; j++)
+			buf[i + j] = val >> (8 * j);
+	}
+
+out:
+	pm_runtime_put(host->dev);
+	return ret;
+}
+
+static const struct mipi_dsi_host_ops cdns_dsi_ops = {
+	.attach = cdns_dsi_attach,
+	.detach = cdns_dsi_detach,
+	.transfer = cdns_dsi_transfer,
+};
+
+static int __maybe_unused cdns_dsi_resume(struct device *dev)
+{
+	struct cdns_dsi *dsi = dev_get_drvdata(dev);
+
+	reset_control_deassert(dsi->dsi_p_rst);
+	clk_prepare_enable(dsi->dsi_p_clk);
+	clk_prepare_enable(dsi->dsi_sys_clk);
+	clk_prepare_enable(dsi->dphy->psm_clk);
+	clk_prepare_enable(dsi->dphy->pll_ref_clk);
+
+	return 0;
+}
+
+static int __maybe_unused cdns_dsi_suspend(struct device *dev)
+{
+	struct cdns_dsi *dsi = dev_get_drvdata(dev);
+
+	clk_disable_unprepare(dsi->dphy->pll_ref_clk);
+	clk_disable_unprepare(dsi->dphy->psm_clk);
+	clk_disable_unprepare(dsi->dsi_sys_clk);
+	clk_disable_unprepare(dsi->dsi_p_clk);
+	reset_control_assert(dsi->dsi_p_rst);
+	dsi->link_initialized = false;
+	return 0;
+}
+
+static UNIVERSAL_DEV_PM_OPS(cdns_dsi_pm_ops, cdns_dsi_suspend, cdns_dsi_resume,
+			    NULL);
+
+static unsigned long cdns_dphy_ref_get_wakeup_time_ns(struct cdns_dphy *dphy)
+{
+	/* Default wakeup time is 800 ns (in a simulated environment). */
+	return 800;
+}
+
+static void cdns_dphy_ref_set_pll_cfg(struct cdns_dphy *dphy,
+				      const struct cdns_dphy_cfg *cfg)
+{
+	u32 fbdiv_low, fbdiv_high;
+
+	fbdiv_low = (cfg->pll_fbdiv / 4) - 2;
+	fbdiv_high = cfg->pll_fbdiv - fbdiv_low - 2;
+
+	writel(DPHY_CMN_IPDIV_FROM_REG | DPHY_CMN_OPDIV_FROM_REG |
+	       DPHY_CMN_IPDIV(cfg->pll_ipdiv) |
+	       DPHY_CMN_OPDIV(cfg->pll_opdiv),
+	       dphy->regs + DPHY_CMN_OPIPDIV);
+	writel(DPHY_CMN_FBDIV_FROM_REG |
+	       DPHY_CMN_FBDIV_VAL(fbdiv_low, fbdiv_high),
+	       dphy->regs + DPHY_CMN_FBDIV);
+	writel(DPHY_CMN_PWM_HIGH(6) | DPHY_CMN_PWM_LOW(0x101) |
+	       DPHY_CMN_PWM_DIV(0x8),
+	       dphy->regs + DPHY_CMN_PWM);
+}
+
+static void cdns_dphy_ref_set_psm_div(struct cdns_dphy *dphy, u8 div)
+{
+	writel(DPHY_PSM_CFG_FROM_REG | DPHY_PSM_CLK_DIV(div),
+	       dphy->regs + DPHY_PSM_CFG);
+}
+
+/*
+ * This is the reference implementation of DPHY hooks. Specific integration of
+ * this IP may have to re-implement some of them depending on how they decided
+ * to wire things in the SoC.
+ */
+static const struct cdns_dphy_ops ref_dphy_ops = {
+	.get_wakeup_time_ns = cdns_dphy_ref_get_wakeup_time_ns,
+	.set_pll_cfg = cdns_dphy_ref_set_pll_cfg,
+	.set_psm_div = cdns_dphy_ref_set_psm_div,
+};
+
+static const struct of_device_id cdns_dphy_of_match[] = {
+	{ .compatible = "cdns,dphy", .data = &ref_dphy_ops },
+	{ /* sentinel */ },
+};
+
+static struct cdns_dphy *cdns_dphy_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *match;
+	struct cdns_dphy *dphy;
+	struct of_phandle_args args;
+	struct resource res;
+	int ret;
+
+	ret = of_parse_phandle_with_args(pdev->dev.of_node, "phys",
+					 "#phy-cells", 0, &args);
+	if (ret)
+		return ERR_PTR(-ENOENT);
+
+	match = of_match_node(cdns_dphy_of_match, args.np);
+	if (!match || !match->data)
+		return ERR_PTR(-EINVAL);
+
+	dphy = devm_kzalloc(&pdev->dev, sizeof(*dphy), GFP_KERNEL);
+	if (!dphy)
+		return ERR_PTR(-ENOMEM);
+
+	dphy->ops = match->data;
+
+	ret = of_address_to_resource(args.np, 0, &res);
+	if (ret)
+		return ERR_PTR(ret);
+
+	dphy->regs = devm_ioremap_resource(&pdev->dev, &res);
+	if (IS_ERR(dphy->regs))
+		return ERR_CAST(dphy->regs);
+
+	dphy->psm_clk = of_clk_get_by_name(args.np, "psm");
+	if (IS_ERR(dphy->psm_clk))
+		return ERR_CAST(dphy->psm_clk);
+
+	dphy->pll_ref_clk = of_clk_get_by_name(args.np, "pll_ref");
+	if (IS_ERR(dphy->pll_ref_clk)) {
+		ret = PTR_ERR(dphy->pll_ref_clk);
+		goto err_put_psm_clk;
+	}
+
+	if (dphy->ops->probe) {
+		ret = dphy->ops->probe(dphy);
+		if (ret)
+			goto err_put_pll_ref_clk;
+	}
+
+	return dphy;
+
+err_put_pll_ref_clk:
+	clk_put(dphy->pll_ref_clk);
+
+err_put_psm_clk:
+	clk_put(dphy->psm_clk);
+
+	return ERR_PTR(ret);
+}
+
+static void cdns_dphy_remove(struct cdns_dphy *dphy)
+{
+	if (dphy->ops->remove)
+		dphy->ops->remove(dphy);
+
+	clk_put(dphy->pll_ref_clk);
+	clk_put(dphy->psm_clk);
+}
+
+static int cdns_dsi_drm_probe(struct platform_device *pdev)
+{
+	struct cdns_dsi *dsi;
+	struct cdns_dsi_input *input;
+	struct resource *res;
+	int ret, irq;
+	u32 val;
+
+	dsi = devm_kzalloc(&pdev->dev, sizeof(*dsi), GFP_KERNEL);
+	if (!dsi)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, dsi);
+
+	input = &dsi->input;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	dsi->regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(dsi->regs))
+		return PTR_ERR(dsi->regs);
+
+	dsi->dsi_p_clk = devm_clk_get(&pdev->dev, "dsi_p_clk");
+	if (IS_ERR(dsi->dsi_p_clk))
+		return PTR_ERR(dsi->dsi_p_clk);
+
+	dsi->dsi_p_rst = devm_reset_control_get_optional_exclusive(&pdev->dev,
+								"dsi_p_rst");
+	if (IS_ERR(dsi->dsi_p_rst))
+		return PTR_ERR(dsi->dsi_p_rst);
+
+	dsi->dsi_sys_clk = devm_clk_get(&pdev->dev, "dsi_sys_clk");
+	if (IS_ERR(dsi->dsi_sys_clk))
+		return PTR_ERR(dsi->dsi_sys_clk);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	dsi->dphy = cdns_dphy_probe(pdev);
+	if (IS_ERR(dsi->dphy))
+		return PTR_ERR(dsi->dphy);
+
+	ret = clk_prepare_enable(dsi->dsi_p_clk);
+	if (ret)
+		goto err_remove_dphy;
+
+	val = readl(dsi->regs + ID_REG);
+	if (REV_VENDOR_ID(val) != 0xcad) {
+		dev_err(&pdev->dev, "invalid vendor id\n");
+		ret = -EINVAL;
+		goto err_disable_pclk;
+	}
+
+	val = readl(dsi->regs + IP_CONF);
+	dsi->direct_cmd_fifo_depth = 1 << (DIRCMD_FIFO_DEPTH(val) + 2);
+	dsi->rx_fifo_depth = RX_FIFO_DEPTH(val);
+	init_completion(&dsi->direct_cmd_comp);
+
+	writel(0, dsi->regs + MCTL_MAIN_DATA_CTL);
+	writel(0, dsi->regs + MCTL_MAIN_EN);
+	writel(0, dsi->regs + MCTL_MAIN_PHY_CTL);
+
+	/*
+	 * We only support the DPI input, so force input->id to
+	 * CDNS_DPI_INPUT.
+	 */
+	input->id = CDNS_DPI_INPUT;
+	input->bridge.funcs = &cdns_dsi_bridge_funcs;
+	input->bridge.of_node = pdev->dev.of_node;
+
+	/* Mask all interrupts before registering the IRQ handler. */
+	writel(0, dsi->regs + MCTL_MAIN_STS_CTL);
+	writel(0, dsi->regs + MCTL_DPHY_ERR_CTL1);
+	writel(0, dsi->regs + CMD_MODE_STS_CTL);
+	writel(0, dsi->regs + DIRECT_CMD_STS_CTL);
+	writel(0, dsi->regs + DIRECT_CMD_RD_STS_CTL);
+	writel(0, dsi->regs + VID_MODE_STS_CTL);
+	writel(0, dsi->regs + TVG_STS_CTL);
+	writel(0, dsi->regs + DPI_IRQ_EN);
+	ret = devm_request_irq(&pdev->dev, irq, cdns_dsi_interrupt, 0,
+			       dev_name(&pdev->dev), dsi);
+	if (ret)
+		goto err_disable_pclk;
+
+	pm_runtime_enable(&pdev->dev);
+	dsi->base.dev = &pdev->dev;
+	dsi->base.ops = &cdns_dsi_ops;
+
+	ret = mipi_dsi_host_register(&dsi->base);
+	if (ret)
+		goto err_disable_runtime_pm;
+
+	clk_disable_unprepare(dsi->dsi_p_clk);
+
+	return 0;
+
+err_disable_runtime_pm:
+	pm_runtime_disable(&pdev->dev);
+
+err_disable_pclk:
+	clk_disable_unprepare(dsi->dsi_p_clk);
+
+err_remove_dphy:
+	cdns_dphy_remove(dsi->dphy);
+
+	return ret;
+}
+
+static int cdns_dsi_drm_remove(struct platform_device *pdev)
+{
+	struct cdns_dsi *dsi = platform_get_drvdata(pdev);
+
+	mipi_dsi_host_unregister(&dsi->base);
+	pm_runtime_disable(&pdev->dev);
+	cdns_dphy_remove(dsi->dphy);
+
+	return 0;
+}
+
+static const struct of_device_id cdns_dsi_of_match[] = {
+	{ .compatible = "cdns,dsi" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, cdns_dsi_of_match);
+
+static struct platform_driver cdns_dsi_platform_driver = {
+	.probe  = cdns_dsi_drm_probe,
+	.remove = cdns_dsi_drm_remove,
+	.driver = {
+		.name   = "cdns-dsi",
+		.of_match_table = cdns_dsi_of_match,
+		.pm = &cdns_dsi_pm_ops,
+	},
+};
+module_platform_driver(cdns_dsi_platform_driver);
+
+MODULE_AUTHOR("Boris Brezillon <boris.brezillon@bootlin.com>");
+MODULE_DESCRIPTION("Cadence DSI driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:cdns-dsi");
+
diff --git a/drivers/gpu/drm/bridge/dumb-vga-dac.c b/drivers/gpu/drm/bridge/dumb-vga-dac.c
new file mode 100644
index 000000000..9b706789a
--- /dev/null
+++ b/drivers/gpu/drm/bridge/dumb-vga-dac.c
@@ -0,0 +1,300 @@
+/*
+ * Copyright (C) 2015-2016 Free Electrons
+ * Copyright (C) 2015-2016 NextThing Co
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_graph.h>
+#include <linux/regulator/consumer.h>
+
+#include <drm/drmP.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_crtc_helper.h>
+
+struct dumb_vga {
+	struct drm_bridge	bridge;
+	struct drm_connector	connector;
+
+	struct i2c_adapter	*ddc;
+	struct regulator	*vdd;
+};
+
+static inline struct dumb_vga *
+drm_bridge_to_dumb_vga(struct drm_bridge *bridge)
+{
+	return container_of(bridge, struct dumb_vga, bridge);
+}
+
+static inline struct dumb_vga *
+drm_connector_to_dumb_vga(struct drm_connector *connector)
+{
+	return container_of(connector, struct dumb_vga, connector);
+}
+
+static int dumb_vga_get_modes(struct drm_connector *connector)
+{
+	struct dumb_vga *vga = drm_connector_to_dumb_vga(connector);
+	struct edid *edid;
+	int ret;
+
+	if (IS_ERR(vga->ddc))
+		goto fallback;
+
+	edid = drm_get_edid(connector, vga->ddc);
+	if (!edid) {
+		DRM_INFO("EDID readout failed, falling back to standard modes\n");
+		goto fallback;
+	}
+
+	drm_connector_update_edid_property(connector, edid);
+	ret = drm_add_edid_modes(connector, edid);
+	kfree(edid);
+	return ret;
+
+fallback:
+	/*
+	 * In case we cannot retrieve the EDIDs (broken or missing i2c
+	 * bus), fallback on the XGA standards
+	 */
+	ret = drm_add_modes_noedid(connector, 1920, 1200);
+
+	/* And prefer a mode pretty much anyone can handle */
+	drm_set_preferred_mode(connector, 1024, 768);
+
+	return ret;
+}
+
+static const struct drm_connector_helper_funcs dumb_vga_con_helper_funcs = {
+	.get_modes	= dumb_vga_get_modes,
+};
+
+static enum drm_connector_status
+dumb_vga_connector_detect(struct drm_connector *connector, bool force)
+{
+	struct dumb_vga *vga = drm_connector_to_dumb_vga(connector);
+
+	/*
+	 * Even if we have an I2C bus, we can't assume that the cable
+	 * is disconnected if drm_probe_ddc fails. Some cables don't
+	 * wire the DDC pins, or the I2C bus might not be working at
+	 * all.
+	 */
+	if (!IS_ERR(vga->ddc) && drm_probe_ddc(vga->ddc))
+		return connector_status_connected;
+
+	return connector_status_unknown;
+}
+
+static const struct drm_connector_funcs dumb_vga_con_funcs = {
+	.detect			= dumb_vga_connector_detect,
+	.fill_modes		= drm_helper_probe_single_connector_modes,
+	.destroy		= drm_connector_cleanup,
+	.reset			= drm_atomic_helper_connector_reset,
+	.atomic_duplicate_state	= drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state	= drm_atomic_helper_connector_destroy_state,
+};
+
+static int dumb_vga_attach(struct drm_bridge *bridge)
+{
+	struct dumb_vga *vga = drm_bridge_to_dumb_vga(bridge);
+	int ret;
+
+	if (!bridge->encoder) {
+		DRM_ERROR("Missing encoder\n");
+		return -ENODEV;
+	}
+
+	drm_connector_helper_add(&vga->connector,
+				 &dumb_vga_con_helper_funcs);
+	ret = drm_connector_init(bridge->dev, &vga->connector,
+				 &dumb_vga_con_funcs, DRM_MODE_CONNECTOR_VGA);
+	if (ret) {
+		DRM_ERROR("Failed to initialize connector\n");
+		return ret;
+	}
+
+	drm_connector_attach_encoder(&vga->connector,
+					  bridge->encoder);
+
+	return 0;
+}
+
+static void dumb_vga_enable(struct drm_bridge *bridge)
+{
+	struct dumb_vga *vga = drm_bridge_to_dumb_vga(bridge);
+	int ret = 0;
+
+	if (vga->vdd)
+		ret = regulator_enable(vga->vdd);
+
+	if (ret)
+		DRM_ERROR("Failed to enable vdd regulator: %d\n", ret);
+}
+
+static void dumb_vga_disable(struct drm_bridge *bridge)
+{
+	struct dumb_vga *vga = drm_bridge_to_dumb_vga(bridge);
+
+	if (vga->vdd)
+		regulator_disable(vga->vdd);
+}
+
+static const struct drm_bridge_funcs dumb_vga_bridge_funcs = {
+	.attach		= dumb_vga_attach,
+	.enable		= dumb_vga_enable,
+	.disable	= dumb_vga_disable,
+};
+
+static struct i2c_adapter *dumb_vga_retrieve_ddc(struct device *dev)
+{
+	struct device_node *phandle, *remote;
+	struct i2c_adapter *ddc;
+
+	remote = of_graph_get_remote_node(dev->of_node, 1, -1);
+	if (!remote)
+		return ERR_PTR(-EINVAL);
+
+	phandle = of_parse_phandle(remote, "ddc-i2c-bus", 0);
+	of_node_put(remote);
+	if (!phandle)
+		return ERR_PTR(-ENODEV);
+
+	ddc = of_get_i2c_adapter_by_node(phandle);
+	of_node_put(phandle);
+	if (!ddc)
+		return ERR_PTR(-EPROBE_DEFER);
+
+	return ddc;
+}
+
+static int dumb_vga_probe(struct platform_device *pdev)
+{
+	struct dumb_vga *vga;
+
+	vga = devm_kzalloc(&pdev->dev, sizeof(*vga), GFP_KERNEL);
+	if (!vga)
+		return -ENOMEM;
+	platform_set_drvdata(pdev, vga);
+
+	vga->vdd = devm_regulator_get_optional(&pdev->dev, "vdd");
+	if (IS_ERR(vga->vdd)) {
+		int ret = PTR_ERR(vga->vdd);
+		if (ret == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+		vga->vdd = NULL;
+		dev_dbg(&pdev->dev, "No vdd regulator found: %d\n", ret);
+	}
+
+	vga->ddc = dumb_vga_retrieve_ddc(&pdev->dev);
+	if (IS_ERR(vga->ddc)) {
+		if (PTR_ERR(vga->ddc) == -ENODEV) {
+			dev_dbg(&pdev->dev,
+				"No i2c bus specified. Disabling EDID readout\n");
+		} else {
+			dev_err(&pdev->dev, "Couldn't retrieve i2c bus\n");
+			return PTR_ERR(vga->ddc);
+		}
+	}
+
+	vga->bridge.funcs = &dumb_vga_bridge_funcs;
+	vga->bridge.of_node = pdev->dev.of_node;
+	vga->bridge.timings = of_device_get_match_data(&pdev->dev);
+
+	drm_bridge_add(&vga->bridge);
+
+	return 0;
+}
+
+static int dumb_vga_remove(struct platform_device *pdev)
+{
+	struct dumb_vga *vga = platform_get_drvdata(pdev);
+
+	drm_bridge_remove(&vga->bridge);
+
+	if (!IS_ERR(vga->ddc))
+		i2c_put_adapter(vga->ddc);
+
+	return 0;
+}
+
+/*
+ * We assume the ADV7123 DAC is the "default" for historical reasons
+ * Information taken from the ADV7123 datasheet, revision D.
+ * NOTE: the ADV7123EP seems to have other timings and need a new timings
+ * set if used.
+ */
+static const struct drm_bridge_timings default_dac_timings = {
+	/* Timing specifications, datasheet page 7 */
+	.sampling_edge = DRM_BUS_FLAG_PIXDATA_POSEDGE,
+	.setup_time_ps = 500,
+	.hold_time_ps = 1500,
+};
+
+/*
+ * Information taken from the THS8134, THS8134A, THS8134B datasheet named
+ * "SLVS205D", dated May 1990, revised March 2000.
+ */
+static const struct drm_bridge_timings ti_ths8134_dac_timings = {
+	/* From timing diagram, datasheet page 9 */
+	.sampling_edge = DRM_BUS_FLAG_PIXDATA_POSEDGE,
+	/* From datasheet, page 12 */
+	.setup_time_ps = 3000,
+	/* I guess this means latched input */
+	.hold_time_ps = 0,
+};
+
+/*
+ * Information taken from the THS8135 datasheet named "SLAS343B", dated
+ * May 2001, revised April 2013.
+ */
+static const struct drm_bridge_timings ti_ths8135_dac_timings = {
+	/* From timing diagram, datasheet page 14 */
+	.sampling_edge = DRM_BUS_FLAG_PIXDATA_POSEDGE,
+	/* From datasheet, page 16 */
+	.setup_time_ps = 2000,
+	.hold_time_ps = 500,
+};
+
+static const struct of_device_id dumb_vga_match[] = {
+	{
+		.compatible = "dumb-vga-dac",
+		.data = NULL,
+	},
+	{
+		.compatible = "adi,adv7123",
+		.data = &default_dac_timings,
+	},
+	{
+		.compatible = "ti,ths8135",
+		.data = &ti_ths8135_dac_timings,
+	},
+	{
+		.compatible = "ti,ths8134",
+		.data = &ti_ths8134_dac_timings,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, dumb_vga_match);
+
+static struct platform_driver dumb_vga_driver = {
+	.probe	= dumb_vga_probe,
+	.remove	= dumb_vga_remove,
+	.driver		= {
+		.name		= "dumb-vga-dac",
+		.of_match_table	= dumb_vga_match,
+	},
+};
+module_platform_driver(dumb_vga_driver);
+
+MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>");
+MODULE_DESCRIPTION("Dumb VGA DAC bridge driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/bridge/lvds-encoder.c b/drivers/gpu/drm/bridge/lvds-encoder.c
new file mode 100644
index 000000000..f56c92f7a
--- /dev/null
+++ b/drivers/gpu/drm/bridge/lvds-encoder.c
@@ -0,0 +1,123 @@
+/*
+ * Copyright (C) 2016 Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <drm/drmP.h>
+#include <drm/drm_bridge.h>
+#include <drm/drm_panel.h>
+
+#include <linux/of_graph.h>
+
+struct lvds_encoder {
+	struct drm_bridge bridge;
+	struct drm_bridge *panel_bridge;
+};
+
+static int lvds_encoder_attach(struct drm_bridge *bridge)
+{
+	struct lvds_encoder *lvds_encoder = container_of(bridge,
+							 struct lvds_encoder,
+							 bridge);
+
+	return drm_bridge_attach(bridge->encoder, lvds_encoder->panel_bridge,
+				 bridge);
+}
+
+static struct drm_bridge_funcs funcs = {
+	.attach = lvds_encoder_attach,
+};
+
+static int lvds_encoder_probe(struct platform_device *pdev)
+{
+	struct device_node *port;
+	struct device_node *endpoint;
+	struct device_node *panel_node;
+	struct drm_panel *panel;
+	struct lvds_encoder *lvds_encoder;
+
+	lvds_encoder = devm_kzalloc(&pdev->dev, sizeof(*lvds_encoder),
+				    GFP_KERNEL);
+	if (!lvds_encoder)
+		return -ENOMEM;
+
+	/* Locate the panel DT node. */
+	port = of_graph_get_port_by_id(pdev->dev.of_node, 1);
+	if (!port) {
+		dev_dbg(&pdev->dev, "port 1 not found\n");
+		return -ENXIO;
+	}
+
+	endpoint = of_get_child_by_name(port, "endpoint");
+	of_node_put(port);
+	if (!endpoint) {
+		dev_dbg(&pdev->dev, "no endpoint for port 1\n");
+		return -ENXIO;
+	}
+
+	panel_node = of_graph_get_remote_port_parent(endpoint);
+	of_node_put(endpoint);
+	if (!panel_node) {
+		dev_dbg(&pdev->dev, "no remote endpoint for port 1\n");
+		return -ENXIO;
+	}
+
+	panel = of_drm_find_panel(panel_node);
+	of_node_put(panel_node);
+	if (IS_ERR(panel)) {
+		dev_dbg(&pdev->dev, "panel not found, deferring probe\n");
+		return PTR_ERR(panel);
+	}
+
+	lvds_encoder->panel_bridge =
+		devm_drm_panel_bridge_add(&pdev->dev,
+					  panel, DRM_MODE_CONNECTOR_LVDS);
+	if (IS_ERR(lvds_encoder->panel_bridge))
+		return PTR_ERR(lvds_encoder->panel_bridge);
+
+	/* The panel_bridge bridge is attached to the panel's of_node,
+	 * but we need a bridge attached to our of_node for our user
+	 * to look up.
+	 */
+	lvds_encoder->bridge.of_node = pdev->dev.of_node;
+	lvds_encoder->bridge.funcs = &funcs;
+	drm_bridge_add(&lvds_encoder->bridge);
+
+	platform_set_drvdata(pdev, lvds_encoder);
+
+	return 0;
+}
+
+static int lvds_encoder_remove(struct platform_device *pdev)
+{
+	struct lvds_encoder *lvds_encoder = platform_get_drvdata(pdev);
+
+	drm_bridge_remove(&lvds_encoder->bridge);
+
+	return 0;
+}
+
+static const struct of_device_id lvds_encoder_match[] = {
+	{ .compatible = "lvds-encoder" },
+	{ .compatible = "thine,thc63lvdm83d" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, lvds_encoder_match);
+
+static struct platform_driver lvds_encoder_driver = {
+	.probe	= lvds_encoder_probe,
+	.remove	= lvds_encoder_remove,
+	.driver		= {
+		.name		= "lvds-encoder",
+		.of_match_table	= lvds_encoder_match,
+	},
+};
+module_platform_driver(lvds_encoder_driver);
+
+MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>");
+MODULE_DESCRIPTION("Transparent parallel to LVDS encoder");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c b/drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c
new file mode 100644
index 000000000..a8d776edc
--- /dev/null
+++ b/drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c
@@ -0,0 +1,452 @@
+/*
+ * Driver for MegaChips STDP4028 with GE B850v3 firmware (LVDS-DP)
+ * Driver for MegaChips STDP2690 with GE B850v3 firmware (DP-DP++)
+
+ * Copyright (c) 2017, Collabora Ltd.
+ * Copyright (c) 2017, General Electric Company
+
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+ * This driver creates a drm_bridge and a drm_connector for the LVDS to DP++
+ * display bridge of the GE B850v3. There are two physical bridges on the video
+ * signal pipeline: a STDP4028(LVDS to DP) and a STDP2690(DP to DP++). The
+ * physical bridges are automatically configured by the input video signal, and
+ * the driver has no access to the video processing pipeline. The driver is
+ * only needed to read EDID from the STDP2690 and to handle HPD events from the
+ * STDP4028. The driver communicates with both bridges over i2c. The video
+ * signal pipeline is as follows:
+ *
+ *   Host -> LVDS|--(STDP4028)--|DP -> DP|--(STDP2690)--|DP++ -> Video output
+ *
+ */
+
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_edid.h>
+#include <drm/drmP.h>
+
+#define EDID_EXT_BLOCK_CNT 0x7E
+
+#define STDP4028_IRQ_OUT_CONF_REG 0x02
+#define STDP4028_DPTX_IRQ_EN_REG 0x3C
+#define STDP4028_DPTX_IRQ_STS_REG 0x3D
+#define STDP4028_DPTX_STS_REG 0x3E
+
+#define STDP4028_DPTX_DP_IRQ_EN 0x1000
+
+#define STDP4028_DPTX_HOTPLUG_IRQ_EN 0x0400
+#define STDP4028_DPTX_LINK_CH_IRQ_EN 0x2000
+#define STDP4028_DPTX_IRQ_CONFIG \
+		(STDP4028_DPTX_LINK_CH_IRQ_EN | STDP4028_DPTX_HOTPLUG_IRQ_EN)
+
+#define STDP4028_DPTX_HOTPLUG_STS 0x0200
+#define STDP4028_DPTX_LINK_STS 0x1000
+#define STDP4028_CON_STATE_CONNECTED \
+		(STDP4028_DPTX_HOTPLUG_STS | STDP4028_DPTX_LINK_STS)
+
+#define STDP4028_DPTX_HOTPLUG_CH_STS 0x0400
+#define STDP4028_DPTX_LINK_CH_STS 0x2000
+#define STDP4028_DPTX_IRQ_CLEAR \
+		(STDP4028_DPTX_LINK_CH_STS | STDP4028_DPTX_HOTPLUG_CH_STS)
+
+static DEFINE_MUTEX(ge_b850v3_lvds_dev_mutex);
+
+struct ge_b850v3_lvds {
+	struct drm_connector connector;
+	struct drm_bridge bridge;
+	struct i2c_client *stdp4028_i2c;
+	struct i2c_client *stdp2690_i2c;
+	struct edid *edid;
+};
+
+static struct ge_b850v3_lvds *ge_b850v3_lvds_ptr;
+
+static u8 *stdp2690_get_edid(struct i2c_client *client)
+{
+	struct i2c_adapter *adapter = client->adapter;
+	unsigned char start = 0x00;
+	unsigned int total_size;
+	u8 *block = kmalloc(EDID_LENGTH, GFP_KERNEL);
+
+	struct i2c_msg msgs[] = {
+		{
+			.addr	= client->addr,
+			.flags	= 0,
+			.len	= 1,
+			.buf	= &start,
+		}, {
+			.addr	= client->addr,
+			.flags	= I2C_M_RD,
+			.len	= EDID_LENGTH,
+			.buf	= block,
+		}
+	};
+
+	if (!block)
+		return NULL;
+
+	if (i2c_transfer(adapter, msgs, 2) != 2) {
+		DRM_ERROR("Unable to read EDID.\n");
+		goto err;
+	}
+
+	if (!drm_edid_block_valid(block, 0, false, NULL)) {
+		DRM_ERROR("Invalid EDID data\n");
+		goto err;
+	}
+
+	total_size = (block[EDID_EXT_BLOCK_CNT] + 1) * EDID_LENGTH;
+	if (total_size > EDID_LENGTH) {
+		kfree(block);
+		block = kmalloc(total_size, GFP_KERNEL);
+		if (!block)
+			return NULL;
+
+		/* Yes, read the entire buffer, and do not skip the first
+		 * EDID_LENGTH bytes.
+		 */
+		start = 0x00;
+		msgs[1].len = total_size;
+		msgs[1].buf = block;
+
+		if (i2c_transfer(adapter, msgs, 2) != 2) {
+			DRM_ERROR("Unable to read EDID extension blocks.\n");
+			goto err;
+		}
+		if (!drm_edid_block_valid(block, 1, false, NULL)) {
+			DRM_ERROR("Invalid EDID data\n");
+			goto err;
+		}
+	}
+
+	return block;
+
+err:
+	kfree(block);
+	return NULL;
+}
+
+static int ge_b850v3_lvds_get_modes(struct drm_connector *connector)
+{
+	struct i2c_client *client;
+	int num_modes = 0;
+
+	client = ge_b850v3_lvds_ptr->stdp2690_i2c;
+
+	kfree(ge_b850v3_lvds_ptr->edid);
+	ge_b850v3_lvds_ptr->edid = (struct edid *)stdp2690_get_edid(client);
+
+	if (ge_b850v3_lvds_ptr->edid) {
+		drm_connector_update_edid_property(connector,
+						      ge_b850v3_lvds_ptr->edid);
+		num_modes = drm_add_edid_modes(connector,
+					       ge_b850v3_lvds_ptr->edid);
+	}
+
+	return num_modes;
+}
+
+static enum drm_mode_status ge_b850v3_lvds_mode_valid(
+		struct drm_connector *connector, struct drm_display_mode *mode)
+{
+	return MODE_OK;
+}
+
+static const struct
+drm_connector_helper_funcs ge_b850v3_lvds_connector_helper_funcs = {
+	.get_modes = ge_b850v3_lvds_get_modes,
+	.mode_valid = ge_b850v3_lvds_mode_valid,
+};
+
+static enum drm_connector_status ge_b850v3_lvds_detect(
+		struct drm_connector *connector, bool force)
+{
+	struct i2c_client *stdp4028_i2c =
+			ge_b850v3_lvds_ptr->stdp4028_i2c;
+	s32 link_state;
+
+	link_state = i2c_smbus_read_word_data(stdp4028_i2c,
+					      STDP4028_DPTX_STS_REG);
+
+	if (link_state == STDP4028_CON_STATE_CONNECTED)
+		return connector_status_connected;
+
+	if (link_state == 0)
+		return connector_status_disconnected;
+
+	return connector_status_unknown;
+}
+
+static const struct drm_connector_funcs ge_b850v3_lvds_connector_funcs = {
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.detect = ge_b850v3_lvds_detect,
+	.destroy = drm_connector_cleanup,
+	.reset = drm_atomic_helper_connector_reset,
+	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static irqreturn_t ge_b850v3_lvds_irq_handler(int irq, void *dev_id)
+{
+	struct i2c_client *stdp4028_i2c
+			= ge_b850v3_lvds_ptr->stdp4028_i2c;
+
+	i2c_smbus_write_word_data(stdp4028_i2c,
+				  STDP4028_DPTX_IRQ_STS_REG,
+				  STDP4028_DPTX_IRQ_CLEAR);
+
+	if (ge_b850v3_lvds_ptr->connector.dev)
+		drm_kms_helper_hotplug_event(ge_b850v3_lvds_ptr->connector.dev);
+
+	return IRQ_HANDLED;
+}
+
+static int ge_b850v3_lvds_attach(struct drm_bridge *bridge)
+{
+	struct drm_connector *connector = &ge_b850v3_lvds_ptr->connector;
+	struct i2c_client *stdp4028_i2c
+			= ge_b850v3_lvds_ptr->stdp4028_i2c;
+	int ret;
+
+	if (!bridge->encoder) {
+		DRM_ERROR("Parent encoder object not found");
+		return -ENODEV;
+	}
+
+	connector->polled = DRM_CONNECTOR_POLL_HPD;
+
+	drm_connector_helper_add(connector,
+				 &ge_b850v3_lvds_connector_helper_funcs);
+
+	ret = drm_connector_init(bridge->dev, connector,
+				 &ge_b850v3_lvds_connector_funcs,
+				 DRM_MODE_CONNECTOR_DisplayPort);
+	if (ret) {
+		DRM_ERROR("Failed to initialize connector with drm\n");
+		return ret;
+	}
+
+	ret = drm_connector_attach_encoder(connector, bridge->encoder);
+	if (ret)
+		return ret;
+
+	/* Configures the bridge to re-enable interrupts after each ack. */
+	i2c_smbus_write_word_data(stdp4028_i2c,
+				  STDP4028_IRQ_OUT_CONF_REG,
+				  STDP4028_DPTX_DP_IRQ_EN);
+
+	/* Enable interrupts */
+	i2c_smbus_write_word_data(stdp4028_i2c,
+				  STDP4028_DPTX_IRQ_EN_REG,
+				  STDP4028_DPTX_IRQ_CONFIG);
+
+	return 0;
+}
+
+static const struct drm_bridge_funcs ge_b850v3_lvds_funcs = {
+	.attach = ge_b850v3_lvds_attach,
+};
+
+static int ge_b850v3_lvds_init(struct device *dev)
+{
+	mutex_lock(&ge_b850v3_lvds_dev_mutex);
+
+	if (ge_b850v3_lvds_ptr)
+		goto success;
+
+	ge_b850v3_lvds_ptr = devm_kzalloc(dev,
+					  sizeof(*ge_b850v3_lvds_ptr),
+					  GFP_KERNEL);
+
+	if (!ge_b850v3_lvds_ptr) {
+		mutex_unlock(&ge_b850v3_lvds_dev_mutex);
+		return -ENOMEM;
+	}
+
+success:
+	mutex_unlock(&ge_b850v3_lvds_dev_mutex);
+	return 0;
+}
+
+static void ge_b850v3_lvds_remove(void)
+{
+	mutex_lock(&ge_b850v3_lvds_dev_mutex);
+	/*
+	 * This check is to avoid both the drivers
+	 * removing the bridge in their remove() function
+	 */
+	if (!ge_b850v3_lvds_ptr)
+		goto out;
+
+	drm_bridge_remove(&ge_b850v3_lvds_ptr->bridge);
+
+	kfree(ge_b850v3_lvds_ptr->edid);
+
+	ge_b850v3_lvds_ptr = NULL;
+out:
+	mutex_unlock(&ge_b850v3_lvds_dev_mutex);
+}
+
+static int ge_b850v3_register(void)
+{
+	struct i2c_client *stdp4028_i2c = ge_b850v3_lvds_ptr->stdp4028_i2c;
+	struct device *dev = &stdp4028_i2c->dev;
+
+	/* drm bridge initialization */
+	ge_b850v3_lvds_ptr->bridge.funcs = &ge_b850v3_lvds_funcs;
+	ge_b850v3_lvds_ptr->bridge.of_node = dev->of_node;
+	drm_bridge_add(&ge_b850v3_lvds_ptr->bridge);
+
+	/* Clear pending interrupts since power up. */
+	i2c_smbus_write_word_data(stdp4028_i2c,
+				  STDP4028_DPTX_IRQ_STS_REG,
+				  STDP4028_DPTX_IRQ_CLEAR);
+
+	if (!stdp4028_i2c->irq)
+		return 0;
+
+	return devm_request_threaded_irq(&stdp4028_i2c->dev,
+			stdp4028_i2c->irq, NULL,
+			ge_b850v3_lvds_irq_handler,
+			IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+			"ge-b850v3-lvds-dp", ge_b850v3_lvds_ptr);
+}
+
+static int stdp4028_ge_b850v3_fw_probe(struct i2c_client *stdp4028_i2c,
+				       const struct i2c_device_id *id)
+{
+	struct device *dev = &stdp4028_i2c->dev;
+	int ret;
+
+	ret = ge_b850v3_lvds_init(dev);
+
+	if (ret)
+		return ret;
+
+	ge_b850v3_lvds_ptr->stdp4028_i2c = stdp4028_i2c;
+	i2c_set_clientdata(stdp4028_i2c, ge_b850v3_lvds_ptr);
+
+	/* Only register after both bridges are probed */
+	if (!ge_b850v3_lvds_ptr->stdp2690_i2c)
+		return 0;
+
+	return ge_b850v3_register();
+}
+
+static int stdp4028_ge_b850v3_fw_remove(struct i2c_client *stdp4028_i2c)
+{
+	ge_b850v3_lvds_remove();
+
+	return 0;
+}
+
+static const struct i2c_device_id stdp4028_ge_b850v3_fw_i2c_table[] = {
+	{"stdp4028_ge_fw", 0},
+	{},
+};
+MODULE_DEVICE_TABLE(i2c, stdp4028_ge_b850v3_fw_i2c_table);
+
+static const struct of_device_id stdp4028_ge_b850v3_fw_match[] = {
+	{ .compatible = "megachips,stdp4028-ge-b850v3-fw" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, stdp4028_ge_b850v3_fw_match);
+
+static struct i2c_driver stdp4028_ge_b850v3_fw_driver = {
+	.id_table	= stdp4028_ge_b850v3_fw_i2c_table,
+	.probe		= stdp4028_ge_b850v3_fw_probe,
+	.remove		= stdp4028_ge_b850v3_fw_remove,
+	.driver		= {
+		.name		= "stdp4028-ge-b850v3-fw",
+		.of_match_table = stdp4028_ge_b850v3_fw_match,
+	},
+};
+
+static int stdp2690_ge_b850v3_fw_probe(struct i2c_client *stdp2690_i2c,
+				       const struct i2c_device_id *id)
+{
+	struct device *dev = &stdp2690_i2c->dev;
+	int ret;
+
+	ret = ge_b850v3_lvds_init(dev);
+
+	if (ret)
+		return ret;
+
+	ge_b850v3_lvds_ptr->stdp2690_i2c = stdp2690_i2c;
+	i2c_set_clientdata(stdp2690_i2c, ge_b850v3_lvds_ptr);
+
+	/* Only register after both bridges are probed */
+	if (!ge_b850v3_lvds_ptr->stdp4028_i2c)
+		return 0;
+
+	return ge_b850v3_register();
+}
+
+static int stdp2690_ge_b850v3_fw_remove(struct i2c_client *stdp2690_i2c)
+{
+	ge_b850v3_lvds_remove();
+
+	return 0;
+}
+
+static const struct i2c_device_id stdp2690_ge_b850v3_fw_i2c_table[] = {
+	{"stdp2690_ge_fw", 0},
+	{},
+};
+MODULE_DEVICE_TABLE(i2c, stdp2690_ge_b850v3_fw_i2c_table);
+
+static const struct of_device_id stdp2690_ge_b850v3_fw_match[] = {
+	{ .compatible = "megachips,stdp2690-ge-b850v3-fw" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, stdp2690_ge_b850v3_fw_match);
+
+static struct i2c_driver stdp2690_ge_b850v3_fw_driver = {
+	.id_table	= stdp2690_ge_b850v3_fw_i2c_table,
+	.probe		= stdp2690_ge_b850v3_fw_probe,
+	.remove		= stdp2690_ge_b850v3_fw_remove,
+	.driver		= {
+		.name		= "stdp2690-ge-b850v3-fw",
+		.of_match_table = stdp2690_ge_b850v3_fw_match,
+	},
+};
+
+static int __init stdpxxxx_ge_b850v3_init(void)
+{
+	int ret;
+
+	ret = i2c_add_driver(&stdp4028_ge_b850v3_fw_driver);
+	if (ret)
+		return ret;
+
+	return i2c_add_driver(&stdp2690_ge_b850v3_fw_driver);
+}
+module_init(stdpxxxx_ge_b850v3_init);
+
+static void __exit stdpxxxx_ge_b850v3_exit(void)
+{
+	i2c_del_driver(&stdp2690_ge_b850v3_fw_driver);
+	i2c_del_driver(&stdp4028_ge_b850v3_fw_driver);
+}
+module_exit(stdpxxxx_ge_b850v3_exit);
+
+MODULE_AUTHOR("Peter Senna Tschudin <peter.senna@collabora.com>");
+MODULE_AUTHOR("Martyn Welch <martyn.welch@collabora.co.uk>");
+MODULE_DESCRIPTION("GE LVDS to DP++ display bridge)");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpu/drm/bridge/nxp-ptn3460.c b/drivers/gpu/drm/bridge/nxp-ptn3460.c
new file mode 100644
index 000000000..a3e817aba
--- /dev/null
+++ b/drivers/gpu/drm/bridge/nxp-ptn3460.c
@@ -0,0 +1,375 @@
+/*
+ * NXP PTN3460 DP/LVDS bridge driver
+ *
+ * Copyright (C) 2013 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_edid.h>
+#include <drm/drm_of.h>
+#include <drm/drm_panel.h>
+#include <drm/drmP.h>
+
+#define PTN3460_EDID_ADDR			0x0
+#define PTN3460_EDID_EMULATION_ADDR		0x84
+#define PTN3460_EDID_ENABLE_EMULATION		0
+#define PTN3460_EDID_EMULATION_SELECTION	1
+#define PTN3460_EDID_SRAM_LOAD_ADDR		0x85
+
+struct ptn3460_bridge {
+	struct drm_connector connector;
+	struct i2c_client *client;
+	struct drm_bridge bridge;
+	struct edid *edid;
+	struct drm_panel *panel;
+	struct gpio_desc *gpio_pd_n;
+	struct gpio_desc *gpio_rst_n;
+	u32 edid_emulation;
+	bool enabled;
+};
+
+static inline struct ptn3460_bridge *
+		bridge_to_ptn3460(struct drm_bridge *bridge)
+{
+	return container_of(bridge, struct ptn3460_bridge, bridge);
+}
+
+static inline struct ptn3460_bridge *
+		connector_to_ptn3460(struct drm_connector *connector)
+{
+	return container_of(connector, struct ptn3460_bridge, connector);
+}
+
+static int ptn3460_read_bytes(struct ptn3460_bridge *ptn_bridge, char addr,
+		u8 *buf, int len)
+{
+	int ret;
+
+	ret = i2c_master_send(ptn_bridge->client, &addr, 1);
+	if (ret <= 0) {
+		DRM_ERROR("Failed to send i2c command, ret=%d\n", ret);
+		return ret;
+	}
+
+	ret = i2c_master_recv(ptn_bridge->client, buf, len);
+	if (ret <= 0) {
+		DRM_ERROR("Failed to recv i2c data, ret=%d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int ptn3460_write_byte(struct ptn3460_bridge *ptn_bridge, char addr,
+		char val)
+{
+	int ret;
+	char buf[2];
+
+	buf[0] = addr;
+	buf[1] = val;
+
+	ret = i2c_master_send(ptn_bridge->client, buf, ARRAY_SIZE(buf));
+	if (ret <= 0) {
+		DRM_ERROR("Failed to send i2c command, ret=%d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int ptn3460_select_edid(struct ptn3460_bridge *ptn_bridge)
+{
+	int ret;
+	char val;
+
+	/* Load the selected edid into SRAM (accessed at PTN3460_EDID_ADDR) */
+	ret = ptn3460_write_byte(ptn_bridge, PTN3460_EDID_SRAM_LOAD_ADDR,
+			ptn_bridge->edid_emulation);
+	if (ret) {
+		DRM_ERROR("Failed to transfer EDID to sram, ret=%d\n", ret);
+		return ret;
+	}
+
+	/* Enable EDID emulation and select the desired EDID */
+	val = 1 << PTN3460_EDID_ENABLE_EMULATION |
+		ptn_bridge->edid_emulation << PTN3460_EDID_EMULATION_SELECTION;
+
+	ret = ptn3460_write_byte(ptn_bridge, PTN3460_EDID_EMULATION_ADDR, val);
+	if (ret) {
+		DRM_ERROR("Failed to write EDID value, ret=%d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void ptn3460_pre_enable(struct drm_bridge *bridge)
+{
+	struct ptn3460_bridge *ptn_bridge = bridge_to_ptn3460(bridge);
+	int ret;
+
+	if (ptn_bridge->enabled)
+		return;
+
+	gpiod_set_value(ptn_bridge->gpio_pd_n, 1);
+
+	gpiod_set_value(ptn_bridge->gpio_rst_n, 0);
+	usleep_range(10, 20);
+	gpiod_set_value(ptn_bridge->gpio_rst_n, 1);
+
+	if (drm_panel_prepare(ptn_bridge->panel)) {
+		DRM_ERROR("failed to prepare panel\n");
+		return;
+	}
+
+	/*
+	 * There's a bug in the PTN chip where it falsely asserts hotplug before
+	 * it is fully functional. We're forced to wait for the maximum start up
+	 * time specified in the chip's datasheet to make sure we're really up.
+	 */
+	msleep(90);
+
+	ret = ptn3460_select_edid(ptn_bridge);
+	if (ret)
+		DRM_ERROR("Select EDID failed ret=%d\n", ret);
+
+	ptn_bridge->enabled = true;
+}
+
+static void ptn3460_enable(struct drm_bridge *bridge)
+{
+	struct ptn3460_bridge *ptn_bridge = bridge_to_ptn3460(bridge);
+
+	if (drm_panel_enable(ptn_bridge->panel)) {
+		DRM_ERROR("failed to enable panel\n");
+		return;
+	}
+}
+
+static void ptn3460_disable(struct drm_bridge *bridge)
+{
+	struct ptn3460_bridge *ptn_bridge = bridge_to_ptn3460(bridge);
+
+	if (!ptn_bridge->enabled)
+		return;
+
+	ptn_bridge->enabled = false;
+
+	if (drm_panel_disable(ptn_bridge->panel)) {
+		DRM_ERROR("failed to disable panel\n");
+		return;
+	}
+
+	gpiod_set_value(ptn_bridge->gpio_rst_n, 1);
+	gpiod_set_value(ptn_bridge->gpio_pd_n, 0);
+}
+
+static void ptn3460_post_disable(struct drm_bridge *bridge)
+{
+	struct ptn3460_bridge *ptn_bridge = bridge_to_ptn3460(bridge);
+
+	if (drm_panel_unprepare(ptn_bridge->panel)) {
+		DRM_ERROR("failed to unprepare panel\n");
+		return;
+	}
+}
+
+static int ptn3460_get_modes(struct drm_connector *connector)
+{
+	struct ptn3460_bridge *ptn_bridge;
+	u8 *edid;
+	int ret, num_modes = 0;
+	bool power_off;
+
+	ptn_bridge = connector_to_ptn3460(connector);
+
+	if (ptn_bridge->edid)
+		return drm_add_edid_modes(connector, ptn_bridge->edid);
+
+	power_off = !ptn_bridge->enabled;
+	ptn3460_pre_enable(&ptn_bridge->bridge);
+
+	edid = kmalloc(EDID_LENGTH, GFP_KERNEL);
+	if (!edid) {
+		DRM_ERROR("Failed to allocate EDID\n");
+		return 0;
+	}
+
+	ret = ptn3460_read_bytes(ptn_bridge, PTN3460_EDID_ADDR, edid,
+			EDID_LENGTH);
+	if (ret) {
+		kfree(edid);
+		goto out;
+	}
+
+	ptn_bridge->edid = (struct edid *)edid;
+	drm_connector_update_edid_property(connector, ptn_bridge->edid);
+
+	num_modes = drm_add_edid_modes(connector, ptn_bridge->edid);
+
+out:
+	if (power_off)
+		ptn3460_disable(&ptn_bridge->bridge);
+
+	return num_modes;
+}
+
+static const struct drm_connector_helper_funcs ptn3460_connector_helper_funcs = {
+	.get_modes = ptn3460_get_modes,
+};
+
+static const struct drm_connector_funcs ptn3460_connector_funcs = {
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.destroy = drm_connector_cleanup,
+	.reset = drm_atomic_helper_connector_reset,
+	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static int ptn3460_bridge_attach(struct drm_bridge *bridge)
+{
+	struct ptn3460_bridge *ptn_bridge = bridge_to_ptn3460(bridge);
+	int ret;
+
+	if (!bridge->encoder) {
+		DRM_ERROR("Parent encoder object not found");
+		return -ENODEV;
+	}
+
+	ptn_bridge->connector.polled = DRM_CONNECTOR_POLL_HPD;
+	ret = drm_connector_init(bridge->dev, &ptn_bridge->connector,
+			&ptn3460_connector_funcs, DRM_MODE_CONNECTOR_LVDS);
+	if (ret) {
+		DRM_ERROR("Failed to initialize connector with drm\n");
+		return ret;
+	}
+	drm_connector_helper_add(&ptn_bridge->connector,
+					&ptn3460_connector_helper_funcs);
+	drm_connector_register(&ptn_bridge->connector);
+	drm_connector_attach_encoder(&ptn_bridge->connector,
+							bridge->encoder);
+
+	if (ptn_bridge->panel)
+		drm_panel_attach(ptn_bridge->panel, &ptn_bridge->connector);
+
+	drm_helper_hpd_irq_event(ptn_bridge->connector.dev);
+
+	return ret;
+}
+
+static const struct drm_bridge_funcs ptn3460_bridge_funcs = {
+	.pre_enable = ptn3460_pre_enable,
+	.enable = ptn3460_enable,
+	.disable = ptn3460_disable,
+	.post_disable = ptn3460_post_disable,
+	.attach = ptn3460_bridge_attach,
+};
+
+static int ptn3460_probe(struct i2c_client *client,
+				const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct ptn3460_bridge *ptn_bridge;
+	int ret;
+
+	ptn_bridge = devm_kzalloc(dev, sizeof(*ptn_bridge), GFP_KERNEL);
+	if (!ptn_bridge) {
+		return -ENOMEM;
+	}
+
+	ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0, &ptn_bridge->panel, NULL);
+	if (ret)
+		return ret;
+
+	ptn_bridge->client = client;
+
+	ptn_bridge->gpio_pd_n = devm_gpiod_get(&client->dev, "powerdown",
+					       GPIOD_OUT_HIGH);
+	if (IS_ERR(ptn_bridge->gpio_pd_n)) {
+		ret = PTR_ERR(ptn_bridge->gpio_pd_n);
+		dev_err(dev, "cannot get gpio_pd_n %d\n", ret);
+		return ret;
+	}
+
+	/*
+	 * Request the reset pin low to avoid the bridge being
+	 * initialized prematurely
+	 */
+	ptn_bridge->gpio_rst_n = devm_gpiod_get(&client->dev, "reset",
+						GPIOD_OUT_LOW);
+	if (IS_ERR(ptn_bridge->gpio_rst_n)) {
+		ret = PTR_ERR(ptn_bridge->gpio_rst_n);
+		DRM_ERROR("cannot get gpio_rst_n %d\n", ret);
+		return ret;
+	}
+
+	ret = of_property_read_u32(dev->of_node, "edid-emulation",
+			&ptn_bridge->edid_emulation);
+	if (ret) {
+		dev_err(dev, "Can't read EDID emulation value\n");
+		return ret;
+	}
+
+	ptn_bridge->bridge.funcs = &ptn3460_bridge_funcs;
+	ptn_bridge->bridge.of_node = dev->of_node;
+	drm_bridge_add(&ptn_bridge->bridge);
+
+	i2c_set_clientdata(client, ptn_bridge);
+
+	return 0;
+}
+
+static int ptn3460_remove(struct i2c_client *client)
+{
+	struct ptn3460_bridge *ptn_bridge = i2c_get_clientdata(client);
+
+	drm_bridge_remove(&ptn_bridge->bridge);
+
+	return 0;
+}
+
+static const struct i2c_device_id ptn3460_i2c_table[] = {
+	{"ptn3460", 0},
+	{},
+};
+MODULE_DEVICE_TABLE(i2c, ptn3460_i2c_table);
+
+static const struct of_device_id ptn3460_match[] = {
+	{ .compatible = "nxp,ptn3460" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, ptn3460_match);
+
+static struct i2c_driver ptn3460_driver = {
+	.id_table	= ptn3460_i2c_table,
+	.probe		= ptn3460_probe,
+	.remove		= ptn3460_remove,
+	.driver		= {
+		.name	= "nxp,ptn3460",
+		.of_match_table = ptn3460_match,
+	},
+};
+module_i2c_driver(ptn3460_driver);
+
+MODULE_AUTHOR("Sean Paul <seanpaul@chromium.org>");
+MODULE_DESCRIPTION("NXP ptn3460 eDP-LVDS converter driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpu/drm/bridge/panel.c b/drivers/gpu/drm/bridge/panel.c
new file mode 100644
index 000000000..7cbaba213
--- /dev/null
+++ b/drivers/gpu/drm/bridge/panel.c
@@ -0,0 +1,234 @@
+/*
+ * Copyright (C) 2016 Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ * Copyright (C) 2017 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <drm/drmP.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_connector.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_encoder.h>
+#include <drm/drm_modeset_helper_vtables.h>
+#include <drm/drm_panel.h>
+
+struct panel_bridge {
+	struct drm_bridge bridge;
+	struct drm_connector connector;
+	struct drm_panel *panel;
+	u32 connector_type;
+};
+
+static inline struct panel_bridge *
+drm_bridge_to_panel_bridge(struct drm_bridge *bridge)
+{
+	return container_of(bridge, struct panel_bridge, bridge);
+}
+
+static inline struct panel_bridge *
+drm_connector_to_panel_bridge(struct drm_connector *connector)
+{
+	return container_of(connector, struct panel_bridge, connector);
+}
+
+static int panel_bridge_connector_get_modes(struct drm_connector *connector)
+{
+	struct panel_bridge *panel_bridge =
+		drm_connector_to_panel_bridge(connector);
+
+	return drm_panel_get_modes(panel_bridge->panel);
+}
+
+static const struct drm_connector_helper_funcs
+panel_bridge_connector_helper_funcs = {
+	.get_modes = panel_bridge_connector_get_modes,
+};
+
+static const struct drm_connector_funcs panel_bridge_connector_funcs = {
+	.reset = drm_atomic_helper_connector_reset,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.destroy = drm_connector_cleanup,
+	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static int panel_bridge_attach(struct drm_bridge *bridge)
+{
+	struct panel_bridge *panel_bridge = drm_bridge_to_panel_bridge(bridge);
+	struct drm_connector *connector = &panel_bridge->connector;
+	int ret;
+
+	if (!bridge->encoder) {
+		DRM_ERROR("Missing encoder\n");
+		return -ENODEV;
+	}
+
+	drm_connector_helper_add(connector,
+				 &panel_bridge_connector_helper_funcs);
+
+	ret = drm_connector_init(bridge->dev, connector,
+				 &panel_bridge_connector_funcs,
+				 panel_bridge->connector_type);
+	if (ret) {
+		DRM_ERROR("Failed to initialize connector\n");
+		return ret;
+	}
+
+	drm_connector_attach_encoder(&panel_bridge->connector,
+					  bridge->encoder);
+
+	ret = drm_panel_attach(panel_bridge->panel, &panel_bridge->connector);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static void panel_bridge_detach(struct drm_bridge *bridge)
+{
+	struct panel_bridge *panel_bridge = drm_bridge_to_panel_bridge(bridge);
+
+	drm_panel_detach(panel_bridge->panel);
+}
+
+static void panel_bridge_pre_enable(struct drm_bridge *bridge)
+{
+	struct panel_bridge *panel_bridge = drm_bridge_to_panel_bridge(bridge);
+
+	drm_panel_prepare(panel_bridge->panel);
+}
+
+static void panel_bridge_enable(struct drm_bridge *bridge)
+{
+	struct panel_bridge *panel_bridge = drm_bridge_to_panel_bridge(bridge);
+
+	drm_panel_enable(panel_bridge->panel);
+}
+
+static void panel_bridge_disable(struct drm_bridge *bridge)
+{
+	struct panel_bridge *panel_bridge = drm_bridge_to_panel_bridge(bridge);
+
+	drm_panel_disable(panel_bridge->panel);
+}
+
+static void panel_bridge_post_disable(struct drm_bridge *bridge)
+{
+	struct panel_bridge *panel_bridge = drm_bridge_to_panel_bridge(bridge);
+
+	drm_panel_unprepare(panel_bridge->panel);
+}
+
+static const struct drm_bridge_funcs panel_bridge_bridge_funcs = {
+	.attach = panel_bridge_attach,
+	.detach = panel_bridge_detach,
+	.pre_enable = panel_bridge_pre_enable,
+	.enable = panel_bridge_enable,
+	.disable = panel_bridge_disable,
+	.post_disable = panel_bridge_post_disable,
+};
+
+/**
+ * drm_panel_bridge_add - Creates a drm_bridge and drm_connector that
+ * just calls the appropriate functions from drm_panel.
+ *
+ * @panel: The drm_panel being wrapped.  Must be non-NULL.
+ * @connector_type: The DRM_MODE_CONNECTOR_* for the connector to be
+ * created.
+ *
+ * For drivers converting from directly using drm_panel: The expected
+ * usage pattern is that during either encoder module probe or DSI
+ * host attach, a drm_panel will be looked up through
+ * drm_of_find_panel_or_bridge().  drm_panel_bridge_add() is used to
+ * wrap that panel in the new bridge, and the result can then be
+ * passed to drm_bridge_attach().  The drm_panel_prepare() and related
+ * functions can be dropped from the encoder driver (they're now
+ * called by the KMS helpers before calling into the encoder), along
+ * with connector creation.  When done with the bridge,
+ * drm_bridge_detach() should be called as normal, then
+ * drm_panel_bridge_remove() to free it.
+ */
+struct drm_bridge *drm_panel_bridge_add(struct drm_panel *panel,
+					u32 connector_type)
+{
+	struct panel_bridge *panel_bridge;
+
+	if (!panel)
+		return ERR_PTR(-EINVAL);
+
+	panel_bridge = devm_kzalloc(panel->dev, sizeof(*panel_bridge),
+				    GFP_KERNEL);
+	if (!panel_bridge)
+		return ERR_PTR(-ENOMEM);
+
+	panel_bridge->connector_type = connector_type;
+	panel_bridge->panel = panel;
+
+	panel_bridge->bridge.funcs = &panel_bridge_bridge_funcs;
+#ifdef CONFIG_OF
+	panel_bridge->bridge.of_node = panel->dev->of_node;
+#endif
+
+	drm_bridge_add(&panel_bridge->bridge);
+
+	return &panel_bridge->bridge;
+}
+EXPORT_SYMBOL(drm_panel_bridge_add);
+
+/**
+ * drm_panel_bridge_remove - Unregisters and frees a drm_bridge
+ * created by drm_panel_bridge_add().
+ *
+ * @bridge: The drm_bridge being freed.
+ */
+void drm_panel_bridge_remove(struct drm_bridge *bridge)
+{
+	struct panel_bridge *panel_bridge;
+
+	if (!bridge)
+		return;
+
+	if (bridge->funcs != &panel_bridge_bridge_funcs)
+		return;
+
+	panel_bridge = drm_bridge_to_panel_bridge(bridge);
+
+	drm_bridge_remove(bridge);
+	devm_kfree(panel_bridge->panel->dev, bridge);
+}
+EXPORT_SYMBOL(drm_panel_bridge_remove);
+
+static void devm_drm_panel_bridge_release(struct device *dev, void *res)
+{
+	struct drm_bridge **bridge = res;
+
+	drm_panel_bridge_remove(*bridge);
+}
+
+struct drm_bridge *devm_drm_panel_bridge_add(struct device *dev,
+					     struct drm_panel *panel,
+					     u32 connector_type)
+{
+	struct drm_bridge **ptr, *bridge;
+
+	ptr = devres_alloc(devm_drm_panel_bridge_release, sizeof(*ptr),
+			   GFP_KERNEL);
+	if (!ptr)
+		return ERR_PTR(-ENOMEM);
+
+	bridge = drm_panel_bridge_add(panel, connector_type);
+	if (!IS_ERR(bridge)) {
+		*ptr = bridge;
+		devres_add(dev, ptr);
+	} else {
+		devres_free(ptr);
+	}
+
+	return bridge;
+}
+EXPORT_SYMBOL(devm_drm_panel_bridge_add);
diff --git a/drivers/gpu/drm/bridge/parade-ps8622.c b/drivers/gpu/drm/bridge/parade-ps8622.c
new file mode 100644
index 000000000..7334d1b62
--- /dev/null
+++ b/drivers/gpu/drm/bridge/parade-ps8622.c
@@ -0,0 +1,638 @@
+/*
+ * Parade PS8622 eDP/LVDS bridge driver
+ *
+ * Copyright (C) 2014 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/backlight.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pm.h>
+#include <linux/regulator/consumer.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_of.h>
+#include <drm/drm_panel.h>
+#include <drm/drmP.h>
+
+/* Brightness scale on the Parade chip */
+#define PS8622_MAX_BRIGHTNESS 0xff
+
+/* Timings taken from the version 1.7 datasheet for the PS8622/PS8625 */
+#define PS8622_POWER_RISE_T1_MIN_US 10
+#define PS8622_POWER_RISE_T1_MAX_US 10000
+#define PS8622_RST_HIGH_T2_MIN_US 3000
+#define PS8622_RST_HIGH_T2_MAX_US 30000
+#define PS8622_PWMO_END_T12_MS 200
+#define PS8622_POWER_FALL_T16_MAX_US 10000
+#define PS8622_POWER_OFF_T17_MS 500
+
+#if ((PS8622_RST_HIGH_T2_MIN_US + PS8622_POWER_RISE_T1_MAX_US) > \
+	(PS8622_RST_HIGH_T2_MAX_US + PS8622_POWER_RISE_T1_MIN_US))
+#error "T2.min + T1.max must be less than T2.max + T1.min"
+#endif
+
+struct ps8622_bridge {
+	struct drm_connector connector;
+	struct i2c_client *client;
+	struct drm_bridge bridge;
+	struct drm_panel *panel;
+	struct regulator *v12;
+	struct backlight_device *bl;
+
+	struct gpio_desc *gpio_slp;
+	struct gpio_desc *gpio_rst;
+
+	u32 max_lane_count;
+	u32 lane_count;
+
+	bool enabled;
+};
+
+static inline struct ps8622_bridge *
+		bridge_to_ps8622(struct drm_bridge *bridge)
+{
+	return container_of(bridge, struct ps8622_bridge, bridge);
+}
+
+static inline struct ps8622_bridge *
+		connector_to_ps8622(struct drm_connector *connector)
+{
+	return container_of(connector, struct ps8622_bridge, connector);
+}
+
+static int ps8622_set(struct i2c_client *client, u8 page, u8 reg, u8 val)
+{
+	int ret;
+	struct i2c_adapter *adap = client->adapter;
+	struct i2c_msg msg;
+	u8 data[] = {reg, val};
+
+	msg.addr = client->addr + page;
+	msg.flags = 0;
+	msg.len = sizeof(data);
+	msg.buf = data;
+
+	ret = i2c_transfer(adap, &msg, 1);
+	if (ret != 1)
+		pr_warn("PS8622 I2C write (0x%02x,0x%02x,0x%02x) failed: %d\n",
+			client->addr + page, reg, val, ret);
+	return !(ret == 1);
+}
+
+static int ps8622_send_config(struct ps8622_bridge *ps8622)
+{
+	struct i2c_client *cl = ps8622->client;
+	int err = 0;
+
+	/* HPD low */
+	err = ps8622_set(cl, 0x02, 0xa1, 0x01);
+	if (err)
+		goto error;
+
+	/* SW setting: [1:0] SW output 1.2V voltage is lower to 96% */
+	err = ps8622_set(cl, 0x04, 0x14, 0x01);
+	if (err)
+		goto error;
+
+	/* RCO SS setting: [5:4] = b01 0.5%, b10 1%, b11 1.5% */
+	err = ps8622_set(cl, 0x04, 0xe3, 0x20);
+	if (err)
+		goto error;
+
+	/* [7] RCO SS enable */
+	err = ps8622_set(cl, 0x04, 0xe2, 0x80);
+	if (err)
+		goto error;
+
+	/* RPHY Setting
+	 * [3:2] CDR tune wait cycle before measure for fine tune
+	 * b00: 1us b01: 0.5us b10:2us, b11: 4us
+	 */
+	err = ps8622_set(cl, 0x04, 0x8a, 0x0c);
+	if (err)
+		goto error;
+
+	/* [3] RFD always on */
+	err = ps8622_set(cl, 0x04, 0x89, 0x08);
+	if (err)
+		goto error;
+
+	/* CTN lock in/out: 20000ppm/80000ppm. Lock out 2 times. */
+	err = ps8622_set(cl, 0x04, 0x71, 0x2d);
+	if (err)
+		goto error;
+
+	/* 2.7G CDR settings: NOF=40LSB for HBR CDR  setting */
+	err = ps8622_set(cl, 0x04, 0x7d, 0x07);
+	if (err)
+		goto error;
+
+	/* [1:0] Fmin=+4bands */
+	err = ps8622_set(cl, 0x04, 0x7b, 0x00);
+	if (err)
+		goto error;
+
+	/* [7:5] DCO_FTRNG=+-40% */
+	err = ps8622_set(cl, 0x04, 0x7a, 0xfd);
+	if (err)
+		goto error;
+
+	/* 1.62G CDR settings: [5:2]NOF=64LSB [1:0]DCO scale is 2/5 */
+	err = ps8622_set(cl, 0x04, 0xc0, 0x12);
+	if (err)
+		goto error;
+
+	/* Gitune=-37% */
+	err = ps8622_set(cl, 0x04, 0xc1, 0x92);
+	if (err)
+		goto error;
+
+	/* Fbstep=100% */
+	err = ps8622_set(cl, 0x04, 0xc2, 0x1c);
+	if (err)
+		goto error;
+
+	/* [7] LOS signal disable */
+	err = ps8622_set(cl, 0x04, 0x32, 0x80);
+	if (err)
+		goto error;
+
+	/* RPIO Setting: [7:4] LVDS driver bias current : 75% (250mV swing) */
+	err = ps8622_set(cl, 0x04, 0x00, 0xb0);
+	if (err)
+		goto error;
+
+	/* [7:6] Right-bar GPIO output strength is 8mA */
+	err = ps8622_set(cl, 0x04, 0x15, 0x40);
+	if (err)
+		goto error;
+
+	/* EQ Training State Machine Setting, RCO calibration start */
+	err = ps8622_set(cl, 0x04, 0x54, 0x10);
+	if (err)
+		goto error;
+
+	/* Logic, needs more than 10 I2C command */
+	/* [4:0] MAX_LANE_COUNT set to max supported lanes */
+	err = ps8622_set(cl, 0x01, 0x02, 0x80 | ps8622->max_lane_count);
+	if (err)
+		goto error;
+
+	/* [4:0] LANE_COUNT_SET set to chosen lane count */
+	err = ps8622_set(cl, 0x01, 0x21, 0x80 | ps8622->lane_count);
+	if (err)
+		goto error;
+
+	err = ps8622_set(cl, 0x00, 0x52, 0x20);
+	if (err)
+		goto error;
+
+	/* HPD CP toggle enable */
+	err = ps8622_set(cl, 0x00, 0xf1, 0x03);
+	if (err)
+		goto error;
+
+	err = ps8622_set(cl, 0x00, 0x62, 0x41);
+	if (err)
+		goto error;
+
+	/* Counter number, add 1ms counter delay */
+	err = ps8622_set(cl, 0x00, 0xf6, 0x01);
+	if (err)
+		goto error;
+
+	/* [6]PWM function control by DPCD0040f[7], default is PWM block */
+	err = ps8622_set(cl, 0x00, 0x77, 0x06);
+	if (err)
+		goto error;
+
+	/* 04h Adjust VTotal toleranceto fix the 30Hz no display issue */
+	err = ps8622_set(cl, 0x00, 0x4c, 0x04);
+	if (err)
+		goto error;
+
+	/* DPCD00400='h00, Parade OUI ='h001cf8 */
+	err = ps8622_set(cl, 0x01, 0xc0, 0x00);
+	if (err)
+		goto error;
+
+	/* DPCD00401='h1c */
+	err = ps8622_set(cl, 0x01, 0xc1, 0x1c);
+	if (err)
+		goto error;
+
+	/* DPCD00402='hf8 */
+	err = ps8622_set(cl, 0x01, 0xc2, 0xf8);
+	if (err)
+		goto error;
+
+	/* DPCD403~408 = ASCII code, D2SLV5='h4432534c5635 */
+	err = ps8622_set(cl, 0x01, 0xc3, 0x44);
+	if (err)
+		goto error;
+
+	/* DPCD404 */
+	err = ps8622_set(cl, 0x01, 0xc4, 0x32);
+	if (err)
+		goto error;
+
+	/* DPCD405 */
+	err = ps8622_set(cl, 0x01, 0xc5, 0x53);
+	if (err)
+		goto error;
+
+	/* DPCD406 */
+	err = ps8622_set(cl, 0x01, 0xc6, 0x4c);
+	if (err)
+		goto error;
+
+	/* DPCD407 */
+	err = ps8622_set(cl, 0x01, 0xc7, 0x56);
+	if (err)
+		goto error;
+
+	/* DPCD408 */
+	err = ps8622_set(cl, 0x01, 0xc8, 0x35);
+	if (err)
+		goto error;
+
+	/* DPCD40A, Initial Code major revision '01' */
+	err = ps8622_set(cl, 0x01, 0xca, 0x01);
+	if (err)
+		goto error;
+
+	/* DPCD40B, Initial Code minor revision '05' */
+	err = ps8622_set(cl, 0x01, 0xcb, 0x05);
+	if (err)
+		goto error;
+
+
+	if (ps8622->bl) {
+		/* DPCD720, internal PWM */
+		err = ps8622_set(cl, 0x01, 0xa5, 0xa0);
+		if (err)
+			goto error;
+
+		/* FFh for 100% brightness, 0h for 0% brightness */
+		err = ps8622_set(cl, 0x01, 0xa7,
+				ps8622->bl->props.brightness);
+		if (err)
+			goto error;
+	} else {
+		/* DPCD720, external PWM */
+		err = ps8622_set(cl, 0x01, 0xa5, 0x80);
+		if (err)
+			goto error;
+	}
+
+	/* Set LVDS output as 6bit-VESA mapping, single LVDS channel */
+	err = ps8622_set(cl, 0x01, 0xcc, 0x13);
+	if (err)
+		goto error;
+
+	/* Enable SSC set by register */
+	err = ps8622_set(cl, 0x02, 0xb1, 0x20);
+	if (err)
+		goto error;
+
+	/* Set SSC enabled and +/-1% central spreading */
+	err = ps8622_set(cl, 0x04, 0x10, 0x16);
+	if (err)
+		goto error;
+
+	/* Logic end */
+	/* MPU Clock source: LC => RCO */
+	err = ps8622_set(cl, 0x04, 0x59, 0x60);
+	if (err)
+		goto error;
+
+	/* LC -> RCO */
+	err = ps8622_set(cl, 0x04, 0x54, 0x14);
+	if (err)
+		goto error;
+
+	/* HPD high */
+	err = ps8622_set(cl, 0x02, 0xa1, 0x91);
+
+error:
+	return err ? -EIO : 0;
+}
+
+static int ps8622_backlight_update(struct backlight_device *bl)
+{
+	struct ps8622_bridge *ps8622 = dev_get_drvdata(&bl->dev);
+	int ret, brightness = bl->props.brightness;
+
+	if (bl->props.power != FB_BLANK_UNBLANK ||
+	    bl->props.state & (BL_CORE_SUSPENDED | BL_CORE_FBBLANK))
+		brightness = 0;
+
+	if (!ps8622->enabled)
+		return -EINVAL;
+
+	ret = ps8622_set(ps8622->client, 0x01, 0xa7, brightness);
+
+	return ret;
+}
+
+static const struct backlight_ops ps8622_backlight_ops = {
+	.update_status	= ps8622_backlight_update,
+};
+
+static void ps8622_pre_enable(struct drm_bridge *bridge)
+{
+	struct ps8622_bridge *ps8622 = bridge_to_ps8622(bridge);
+	int ret;
+
+	if (ps8622->enabled)
+		return;
+
+	gpiod_set_value(ps8622->gpio_rst, 0);
+
+	if (ps8622->v12) {
+		ret = regulator_enable(ps8622->v12);
+		if (ret)
+			DRM_ERROR("fails to enable ps8622->v12");
+	}
+
+	if (drm_panel_prepare(ps8622->panel)) {
+		DRM_ERROR("failed to prepare panel\n");
+		return;
+	}
+
+	gpiod_set_value(ps8622->gpio_slp, 1);
+
+	/*
+	 * T1 is the range of time that it takes for the power to rise after we
+	 * enable the lcd/ps8622 fet. T2 is the range of time in which the
+	 * data sheet specifies we should deassert the reset pin.
+	 *
+	 * If it takes T1.max for the power to rise, we need to wait atleast
+	 * T2.min before deasserting the reset pin. If it takes T1.min for the
+	 * power to rise, we need to wait at most T2.max before deasserting the
+	 * reset pin.
+	 */
+	usleep_range(PS8622_RST_HIGH_T2_MIN_US + PS8622_POWER_RISE_T1_MAX_US,
+		     PS8622_RST_HIGH_T2_MAX_US + PS8622_POWER_RISE_T1_MIN_US);
+
+	gpiod_set_value(ps8622->gpio_rst, 1);
+
+	/* wait 20ms after RST high */
+	usleep_range(20000, 30000);
+
+	ret = ps8622_send_config(ps8622);
+	if (ret) {
+		DRM_ERROR("Failed to send config to bridge (%d)\n", ret);
+		return;
+	}
+
+	ps8622->enabled = true;
+}
+
+static void ps8622_enable(struct drm_bridge *bridge)
+{
+	struct ps8622_bridge *ps8622 = bridge_to_ps8622(bridge);
+
+	if (drm_panel_enable(ps8622->panel)) {
+		DRM_ERROR("failed to enable panel\n");
+		return;
+	}
+}
+
+static void ps8622_disable(struct drm_bridge *bridge)
+{
+	struct ps8622_bridge *ps8622 = bridge_to_ps8622(bridge);
+
+	if (drm_panel_disable(ps8622->panel)) {
+		DRM_ERROR("failed to disable panel\n");
+		return;
+	}
+	msleep(PS8622_PWMO_END_T12_MS);
+}
+
+static void ps8622_post_disable(struct drm_bridge *bridge)
+{
+	struct ps8622_bridge *ps8622 = bridge_to_ps8622(bridge);
+
+	if (!ps8622->enabled)
+		return;
+
+	ps8622->enabled = false;
+
+	/*
+	 * This doesn't matter if the regulators are turned off, but something
+	 * else might keep them on. In that case, we want to assert the slp gpio
+	 * to lower power.
+	 */
+	gpiod_set_value(ps8622->gpio_slp, 0);
+
+	if (drm_panel_unprepare(ps8622->panel)) {
+		DRM_ERROR("failed to unprepare panel\n");
+		return;
+	}
+
+	if (ps8622->v12)
+		regulator_disable(ps8622->v12);
+
+	/*
+	 * Sleep for at least the amount of time that it takes the power rail to
+	 * fall to prevent asserting the rst gpio from doing anything.
+	 */
+	usleep_range(PS8622_POWER_FALL_T16_MAX_US,
+		     2 * PS8622_POWER_FALL_T16_MAX_US);
+	gpiod_set_value(ps8622->gpio_rst, 0);
+
+	msleep(PS8622_POWER_OFF_T17_MS);
+}
+
+static int ps8622_get_modes(struct drm_connector *connector)
+{
+	struct ps8622_bridge *ps8622;
+
+	ps8622 = connector_to_ps8622(connector);
+
+	return drm_panel_get_modes(ps8622->panel);
+}
+
+static const struct drm_connector_helper_funcs ps8622_connector_helper_funcs = {
+	.get_modes = ps8622_get_modes,
+};
+
+static const struct drm_connector_funcs ps8622_connector_funcs = {
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.destroy = drm_connector_cleanup,
+	.reset = drm_atomic_helper_connector_reset,
+	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static int ps8622_attach(struct drm_bridge *bridge)
+{
+	struct ps8622_bridge *ps8622 = bridge_to_ps8622(bridge);
+	int ret;
+
+	if (!bridge->encoder) {
+		DRM_ERROR("Parent encoder object not found");
+		return -ENODEV;
+	}
+
+	ps8622->connector.polled = DRM_CONNECTOR_POLL_HPD;
+	ret = drm_connector_init(bridge->dev, &ps8622->connector,
+			&ps8622_connector_funcs, DRM_MODE_CONNECTOR_LVDS);
+	if (ret) {
+		DRM_ERROR("Failed to initialize connector with drm\n");
+		return ret;
+	}
+	drm_connector_helper_add(&ps8622->connector,
+					&ps8622_connector_helper_funcs);
+	drm_connector_register(&ps8622->connector);
+	drm_connector_attach_encoder(&ps8622->connector,
+							bridge->encoder);
+
+	if (ps8622->panel)
+		drm_panel_attach(ps8622->panel, &ps8622->connector);
+
+	drm_helper_hpd_irq_event(ps8622->connector.dev);
+
+	return ret;
+}
+
+static const struct drm_bridge_funcs ps8622_bridge_funcs = {
+	.pre_enable = ps8622_pre_enable,
+	.enable = ps8622_enable,
+	.disable = ps8622_disable,
+	.post_disable = ps8622_post_disable,
+	.attach = ps8622_attach,
+};
+
+static const struct of_device_id ps8622_devices[] = {
+	{.compatible = "parade,ps8622",},
+	{.compatible = "parade,ps8625",},
+	{}
+};
+MODULE_DEVICE_TABLE(of, ps8622_devices);
+
+static int ps8622_probe(struct i2c_client *client,
+					const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct ps8622_bridge *ps8622;
+	int ret;
+
+	ps8622 = devm_kzalloc(dev, sizeof(*ps8622), GFP_KERNEL);
+	if (!ps8622)
+		return -ENOMEM;
+
+	ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0, &ps8622->panel, NULL);
+	if (ret)
+		return ret;
+
+	ps8622->client = client;
+
+	ps8622->v12 = devm_regulator_get(dev, "vdd12");
+	if (IS_ERR(ps8622->v12)) {
+		dev_info(dev, "no 1.2v regulator found for PS8622\n");
+		ps8622->v12 = NULL;
+	}
+
+	ps8622->gpio_slp = devm_gpiod_get(dev, "sleep", GPIOD_OUT_HIGH);
+	if (IS_ERR(ps8622->gpio_slp)) {
+		ret = PTR_ERR(ps8622->gpio_slp);
+		dev_err(dev, "cannot get gpio_slp %d\n", ret);
+		return ret;
+	}
+
+	/*
+	 * Assert the reset pin high to avoid the bridge being
+	 * initialized prematurely
+	 */
+	ps8622->gpio_rst = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(ps8622->gpio_rst)) {
+		ret = PTR_ERR(ps8622->gpio_rst);
+		dev_err(dev, "cannot get gpio_rst %d\n", ret);
+		return ret;
+	}
+
+	ps8622->max_lane_count = id->driver_data;
+
+	if (of_property_read_u32(dev->of_node, "lane-count",
+						&ps8622->lane_count)) {
+		ps8622->lane_count = ps8622->max_lane_count;
+	} else if (ps8622->lane_count > ps8622->max_lane_count) {
+		dev_info(dev, "lane-count property is too high,"
+						"using max_lane_count\n");
+		ps8622->lane_count = ps8622->max_lane_count;
+	}
+
+	if (!of_find_property(dev->of_node, "use-external-pwm", NULL)) {
+		ps8622->bl = backlight_device_register("ps8622-backlight",
+				dev, ps8622, &ps8622_backlight_ops,
+				NULL);
+		if (IS_ERR(ps8622->bl)) {
+			DRM_ERROR("failed to register backlight\n");
+			ret = PTR_ERR(ps8622->bl);
+			ps8622->bl = NULL;
+			return ret;
+		}
+		ps8622->bl->props.max_brightness = PS8622_MAX_BRIGHTNESS;
+		ps8622->bl->props.brightness = PS8622_MAX_BRIGHTNESS;
+	}
+
+	ps8622->bridge.funcs = &ps8622_bridge_funcs;
+	ps8622->bridge.of_node = dev->of_node;
+	drm_bridge_add(&ps8622->bridge);
+
+	i2c_set_clientdata(client, ps8622);
+
+	return 0;
+}
+
+static int ps8622_remove(struct i2c_client *client)
+{
+	struct ps8622_bridge *ps8622 = i2c_get_clientdata(client);
+
+	backlight_device_unregister(ps8622->bl);
+	drm_bridge_remove(&ps8622->bridge);
+
+	return 0;
+}
+
+static const struct i2c_device_id ps8622_i2c_table[] = {
+	/* Device type, max_lane_count */
+	{"ps8622", 1},
+	{"ps8625", 2},
+	{},
+};
+MODULE_DEVICE_TABLE(i2c, ps8622_i2c_table);
+
+static struct i2c_driver ps8622_driver = {
+	.id_table	= ps8622_i2c_table,
+	.probe		= ps8622_probe,
+	.remove		= ps8622_remove,
+	.driver		= {
+		.name	= "ps8622",
+		.of_match_table = ps8622_devices,
+	},
+};
+module_i2c_driver(ps8622_driver);
+
+MODULE_AUTHOR("Vincent Palatin <vpalatin@chromium.org>");
+MODULE_DESCRIPTION("Parade ps8622/ps8625 eDP-LVDS converter driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpu/drm/bridge/sii902x.c b/drivers/gpu/drm/bridge/sii902x.c
new file mode 100644
index 000000000..0cc6dbbcd
--- /dev/null
+++ b/drivers/gpu/drm/bridge/sii902x.c
@@ -0,0 +1,475 @@
+/*
+ * Copyright (C) 2016 Atmel
+ *		      Bo Shen <voice.shen@atmel.com>
+ *
+ * Authors:	      Bo Shen <voice.shen@atmel.com>
+ *		      Boris Brezillon <boris.brezillon@free-electrons.com>
+ *		      Wu, Songjun <Songjun.Wu@atmel.com>
+ *
+ *
+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+#include <drm/drmP.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_edid.h>
+
+#define SII902X_TPI_VIDEO_DATA			0x0
+
+#define SII902X_TPI_PIXEL_REPETITION		0x8
+#define SII902X_TPI_AVI_PIXEL_REP_BUS_24BIT     BIT(5)
+#define SII902X_TPI_AVI_PIXEL_REP_RISING_EDGE   BIT(4)
+#define SII902X_TPI_AVI_PIXEL_REP_4X		3
+#define SII902X_TPI_AVI_PIXEL_REP_2X		1
+#define SII902X_TPI_AVI_PIXEL_REP_NONE		0
+#define SII902X_TPI_CLK_RATIO_HALF		(0 << 6)
+#define SII902X_TPI_CLK_RATIO_1X		(1 << 6)
+#define SII902X_TPI_CLK_RATIO_2X		(2 << 6)
+#define SII902X_TPI_CLK_RATIO_4X		(3 << 6)
+
+#define SII902X_TPI_AVI_IN_FORMAT		0x9
+#define SII902X_TPI_AVI_INPUT_BITMODE_12BIT	BIT(7)
+#define SII902X_TPI_AVI_INPUT_DITHER		BIT(6)
+#define SII902X_TPI_AVI_INPUT_RANGE_LIMITED	(2 << 2)
+#define SII902X_TPI_AVI_INPUT_RANGE_FULL	(1 << 2)
+#define SII902X_TPI_AVI_INPUT_RANGE_AUTO	(0 << 2)
+#define SII902X_TPI_AVI_INPUT_COLORSPACE_BLACK	(3 << 0)
+#define SII902X_TPI_AVI_INPUT_COLORSPACE_YUV422	(2 << 0)
+#define SII902X_TPI_AVI_INPUT_COLORSPACE_YUV444	(1 << 0)
+#define SII902X_TPI_AVI_INPUT_COLORSPACE_RGB	(0 << 0)
+
+#define SII902X_TPI_AVI_INFOFRAME		0x0c
+
+#define SII902X_SYS_CTRL_DATA			0x1a
+#define SII902X_SYS_CTRL_PWR_DWN		BIT(4)
+#define SII902X_SYS_CTRL_AV_MUTE		BIT(3)
+#define SII902X_SYS_CTRL_DDC_BUS_REQ		BIT(2)
+#define SII902X_SYS_CTRL_DDC_BUS_GRTD		BIT(1)
+#define SII902X_SYS_CTRL_OUTPUT_MODE		BIT(0)
+#define SII902X_SYS_CTRL_OUTPUT_HDMI		1
+#define SII902X_SYS_CTRL_OUTPUT_DVI		0
+
+#define SII902X_REG_CHIPID(n)			(0x1b + (n))
+
+#define SII902X_PWR_STATE_CTRL			0x1e
+#define SII902X_AVI_POWER_STATE_MSK		GENMASK(1, 0)
+#define SII902X_AVI_POWER_STATE_D(l)		((l) & SII902X_AVI_POWER_STATE_MSK)
+
+#define SII902X_INT_ENABLE			0x3c
+#define SII902X_INT_STATUS			0x3d
+#define SII902X_HOTPLUG_EVENT			BIT(0)
+#define SII902X_PLUGGED_STATUS			BIT(2)
+
+#define SII902X_REG_TPI_RQB			0xc7
+
+#define SII902X_I2C_BUS_ACQUISITION_TIMEOUT_MS	500
+
+struct sii902x {
+	struct i2c_client *i2c;
+	struct regmap *regmap;
+	struct drm_bridge bridge;
+	struct drm_connector connector;
+	struct gpio_desc *reset_gpio;
+};
+
+static inline struct sii902x *bridge_to_sii902x(struct drm_bridge *bridge)
+{
+	return container_of(bridge, struct sii902x, bridge);
+}
+
+static inline struct sii902x *connector_to_sii902x(struct drm_connector *con)
+{
+	return container_of(con, struct sii902x, connector);
+}
+
+static void sii902x_reset(struct sii902x *sii902x)
+{
+	if (!sii902x->reset_gpio)
+		return;
+
+	gpiod_set_value(sii902x->reset_gpio, 1);
+
+	/* The datasheet says treset-min = 100us. Make it 150us to be sure. */
+	usleep_range(150, 200);
+
+	gpiod_set_value(sii902x->reset_gpio, 0);
+}
+
+static enum drm_connector_status
+sii902x_connector_detect(struct drm_connector *connector, bool force)
+{
+	struct sii902x *sii902x = connector_to_sii902x(connector);
+	unsigned int status;
+
+	regmap_read(sii902x->regmap, SII902X_INT_STATUS, &status);
+
+	return (status & SII902X_PLUGGED_STATUS) ?
+	       connector_status_connected : connector_status_disconnected;
+}
+
+static const struct drm_connector_funcs sii902x_connector_funcs = {
+	.detect = sii902x_connector_detect,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.destroy = drm_connector_cleanup,
+	.reset = drm_atomic_helper_connector_reset,
+	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static int sii902x_get_modes(struct drm_connector *connector)
+{
+	struct sii902x *sii902x = connector_to_sii902x(connector);
+	struct regmap *regmap = sii902x->regmap;
+	u32 bus_format = MEDIA_BUS_FMT_RGB888_1X24;
+	struct device *dev = &sii902x->i2c->dev;
+	unsigned long timeout;
+	unsigned int retries;
+	unsigned int status;
+	struct edid *edid;
+	int num = 0;
+	int ret;
+
+	ret = regmap_update_bits(regmap, SII902X_SYS_CTRL_DATA,
+				 SII902X_SYS_CTRL_DDC_BUS_REQ,
+				 SII902X_SYS_CTRL_DDC_BUS_REQ);
+	if (ret)
+		return ret;
+
+	timeout = jiffies +
+		  msecs_to_jiffies(SII902X_I2C_BUS_ACQUISITION_TIMEOUT_MS);
+	do {
+		ret = regmap_read(regmap, SII902X_SYS_CTRL_DATA, &status);
+		if (ret)
+			return ret;
+	} while (!(status & SII902X_SYS_CTRL_DDC_BUS_GRTD) &&
+		 time_before(jiffies, timeout));
+
+	if (!(status & SII902X_SYS_CTRL_DDC_BUS_GRTD)) {
+		dev_err(dev, "failed to acquire the i2c bus\n");
+		return -ETIMEDOUT;
+	}
+
+	ret = regmap_write(regmap, SII902X_SYS_CTRL_DATA, status);
+	if (ret)
+		return ret;
+
+	edid = drm_get_edid(connector, sii902x->i2c->adapter);
+	drm_connector_update_edid_property(connector, edid);
+	if (edid) {
+		num = drm_add_edid_modes(connector, edid);
+		kfree(edid);
+	}
+
+	ret = drm_display_info_set_bus_formats(&connector->display_info,
+					       &bus_format, 1);
+	if (ret)
+		return ret;
+
+	/*
+	 * Sometimes the I2C bus can stall after failure to use the
+	 * EDID channel. Retry a few times to see if things clear
+	 * up, else continue anyway.
+	 */
+	retries = 5;
+	do {
+		ret = regmap_read(regmap, SII902X_SYS_CTRL_DATA,
+				  &status);
+		retries--;
+	} while (ret && retries);
+	if (ret)
+		dev_err(dev, "failed to read status (%d)\n", ret);
+
+	ret = regmap_update_bits(regmap, SII902X_SYS_CTRL_DATA,
+				 SII902X_SYS_CTRL_DDC_BUS_REQ |
+				 SII902X_SYS_CTRL_DDC_BUS_GRTD, 0);
+	if (ret)
+		return ret;
+
+	timeout = jiffies +
+		  msecs_to_jiffies(SII902X_I2C_BUS_ACQUISITION_TIMEOUT_MS);
+	do {
+		ret = regmap_read(regmap, SII902X_SYS_CTRL_DATA, &status);
+		if (ret)
+			return ret;
+	} while (status & (SII902X_SYS_CTRL_DDC_BUS_REQ |
+			   SII902X_SYS_CTRL_DDC_BUS_GRTD) &&
+		 time_before(jiffies, timeout));
+
+	if (status & (SII902X_SYS_CTRL_DDC_BUS_REQ |
+		      SII902X_SYS_CTRL_DDC_BUS_GRTD)) {
+		dev_err(dev, "failed to release the i2c bus\n");
+		return -ETIMEDOUT;
+	}
+
+	return num;
+}
+
+static enum drm_mode_status sii902x_mode_valid(struct drm_connector *connector,
+					       struct drm_display_mode *mode)
+{
+	/* TODO: check mode */
+
+	return MODE_OK;
+}
+
+static const struct drm_connector_helper_funcs sii902x_connector_helper_funcs = {
+	.get_modes = sii902x_get_modes,
+	.mode_valid = sii902x_mode_valid,
+};
+
+static void sii902x_bridge_disable(struct drm_bridge *bridge)
+{
+	struct sii902x *sii902x = bridge_to_sii902x(bridge);
+
+	regmap_update_bits(sii902x->regmap, SII902X_SYS_CTRL_DATA,
+			   SII902X_SYS_CTRL_PWR_DWN,
+			   SII902X_SYS_CTRL_PWR_DWN);
+}
+
+static void sii902x_bridge_enable(struct drm_bridge *bridge)
+{
+	struct sii902x *sii902x = bridge_to_sii902x(bridge);
+
+	regmap_update_bits(sii902x->regmap, SII902X_PWR_STATE_CTRL,
+			   SII902X_AVI_POWER_STATE_MSK,
+			   SII902X_AVI_POWER_STATE_D(0));
+	regmap_update_bits(sii902x->regmap, SII902X_SYS_CTRL_DATA,
+			   SII902X_SYS_CTRL_PWR_DWN, 0);
+}
+
+static void sii902x_bridge_mode_set(struct drm_bridge *bridge,
+				    struct drm_display_mode *mode,
+				    struct drm_display_mode *adj)
+{
+	struct sii902x *sii902x = bridge_to_sii902x(bridge);
+	struct regmap *regmap = sii902x->regmap;
+	u8 buf[HDMI_INFOFRAME_SIZE(AVI)];
+	struct hdmi_avi_infoframe frame;
+	u16 pixel_clock_10kHz = adj->clock / 10;
+	int ret;
+
+	buf[0] = pixel_clock_10kHz & 0xff;
+	buf[1] = pixel_clock_10kHz >> 8;
+	buf[2] = adj->vrefresh;
+	buf[3] = 0x00;
+	buf[4] = adj->hdisplay;
+	buf[5] = adj->hdisplay >> 8;
+	buf[6] = adj->vdisplay;
+	buf[7] = adj->vdisplay >> 8;
+	buf[8] = SII902X_TPI_CLK_RATIO_1X | SII902X_TPI_AVI_PIXEL_REP_NONE |
+		 SII902X_TPI_AVI_PIXEL_REP_BUS_24BIT;
+	buf[9] = SII902X_TPI_AVI_INPUT_RANGE_AUTO |
+		 SII902X_TPI_AVI_INPUT_COLORSPACE_RGB;
+
+	ret = regmap_bulk_write(regmap, SII902X_TPI_VIDEO_DATA, buf, 10);
+	if (ret)
+		return;
+
+	ret = drm_hdmi_avi_infoframe_from_display_mode(&frame, adj, false);
+	if (ret < 0) {
+		DRM_ERROR("couldn't fill AVI infoframe\n");
+		return;
+	}
+
+	ret = hdmi_avi_infoframe_pack(&frame, buf, sizeof(buf));
+	if (ret < 0) {
+		DRM_ERROR("failed to pack AVI infoframe: %d\n", ret);
+		return;
+	}
+
+	/* Do not send the infoframe header, but keep the CRC field. */
+	regmap_bulk_write(regmap, SII902X_TPI_AVI_INFOFRAME,
+			  buf + HDMI_INFOFRAME_HEADER_SIZE - 1,
+			  HDMI_AVI_INFOFRAME_SIZE + 1);
+}
+
+static int sii902x_bridge_attach(struct drm_bridge *bridge)
+{
+	struct sii902x *sii902x = bridge_to_sii902x(bridge);
+	struct drm_device *drm = bridge->dev;
+	int ret;
+
+	drm_connector_helper_add(&sii902x->connector,
+				 &sii902x_connector_helper_funcs);
+
+	if (!drm_core_check_feature(drm, DRIVER_ATOMIC)) {
+		dev_err(&sii902x->i2c->dev,
+			"sii902x driver is only compatible with DRM devices supporting atomic updates\n");
+		return -ENOTSUPP;
+	}
+
+	ret = drm_connector_init(drm, &sii902x->connector,
+				 &sii902x_connector_funcs,
+				 DRM_MODE_CONNECTOR_HDMIA);
+	if (ret)
+		return ret;
+
+	if (sii902x->i2c->irq > 0)
+		sii902x->connector.polled = DRM_CONNECTOR_POLL_HPD;
+	else
+		sii902x->connector.polled = DRM_CONNECTOR_POLL_CONNECT;
+
+	drm_connector_attach_encoder(&sii902x->connector, bridge->encoder);
+
+	return 0;
+}
+
+static const struct drm_bridge_funcs sii902x_bridge_funcs = {
+	.attach = sii902x_bridge_attach,
+	.mode_set = sii902x_bridge_mode_set,
+	.disable = sii902x_bridge_disable,
+	.enable = sii902x_bridge_enable,
+};
+
+static const struct regmap_range sii902x_volatile_ranges[] = {
+	{ .range_min = 0, .range_max = 0xff },
+};
+
+static const struct regmap_access_table sii902x_volatile_table = {
+	.yes_ranges = sii902x_volatile_ranges,
+	.n_yes_ranges = ARRAY_SIZE(sii902x_volatile_ranges),
+};
+
+static const struct regmap_config sii902x_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.volatile_table = &sii902x_volatile_table,
+	.cache_type = REGCACHE_NONE,
+};
+
+static irqreturn_t sii902x_interrupt(int irq, void *data)
+{
+	struct sii902x *sii902x = data;
+	unsigned int status = 0;
+
+	regmap_read(sii902x->regmap, SII902X_INT_STATUS, &status);
+	regmap_write(sii902x->regmap, SII902X_INT_STATUS, status);
+
+	if ((status & SII902X_HOTPLUG_EVENT) && sii902x->bridge.dev)
+		drm_helper_hpd_irq_event(sii902x->bridge.dev);
+
+	return IRQ_HANDLED;
+}
+
+static int sii902x_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	unsigned int status = 0;
+	struct sii902x *sii902x;
+	u8 chipid[4];
+	int ret;
+
+	sii902x = devm_kzalloc(dev, sizeof(*sii902x), GFP_KERNEL);
+	if (!sii902x)
+		return -ENOMEM;
+
+	sii902x->i2c = client;
+	sii902x->regmap = devm_regmap_init_i2c(client, &sii902x_regmap_config);
+	if (IS_ERR(sii902x->regmap))
+		return PTR_ERR(sii902x->regmap);
+
+	sii902x->reset_gpio = devm_gpiod_get_optional(dev, "reset",
+						      GPIOD_OUT_LOW);
+	if (IS_ERR(sii902x->reset_gpio)) {
+		dev_err(dev, "Failed to retrieve/request reset gpio: %ld\n",
+			PTR_ERR(sii902x->reset_gpio));
+		return PTR_ERR(sii902x->reset_gpio);
+	}
+
+	sii902x_reset(sii902x);
+
+	ret = regmap_write(sii902x->regmap, SII902X_REG_TPI_RQB, 0x0);
+	if (ret)
+		return ret;
+
+	ret = regmap_bulk_read(sii902x->regmap, SII902X_REG_CHIPID(0),
+			       &chipid, 4);
+	if (ret) {
+		dev_err(dev, "regmap_read failed %d\n", ret);
+		return ret;
+	}
+
+	if (chipid[0] != 0xb0) {
+		dev_err(dev, "Invalid chipid: %02x (expecting 0xb0)\n",
+			chipid[0]);
+		return -EINVAL;
+	}
+
+	/* Clear all pending interrupts */
+	regmap_read(sii902x->regmap, SII902X_INT_STATUS, &status);
+	regmap_write(sii902x->regmap, SII902X_INT_STATUS, status);
+
+	if (client->irq > 0) {
+		regmap_write(sii902x->regmap, SII902X_INT_ENABLE,
+			     SII902X_HOTPLUG_EVENT);
+
+		ret = devm_request_threaded_irq(dev, client->irq, NULL,
+						sii902x_interrupt,
+						IRQF_ONESHOT, dev_name(dev),
+						sii902x);
+		if (ret)
+			return ret;
+	}
+
+	sii902x->bridge.funcs = &sii902x_bridge_funcs;
+	sii902x->bridge.of_node = dev->of_node;
+	drm_bridge_add(&sii902x->bridge);
+
+	i2c_set_clientdata(client, sii902x);
+
+	return 0;
+}
+
+static int sii902x_remove(struct i2c_client *client)
+
+{
+	struct sii902x *sii902x = i2c_get_clientdata(client);
+
+	drm_bridge_remove(&sii902x->bridge);
+
+	return 0;
+}
+
+static const struct of_device_id sii902x_dt_ids[] = {
+	{ .compatible = "sil,sii9022", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sii902x_dt_ids);
+
+static const struct i2c_device_id sii902x_i2c_ids[] = {
+	{ "sii9022", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, sii902x_i2c_ids);
+
+static struct i2c_driver sii902x_driver = {
+	.probe = sii902x_probe,
+	.remove = sii902x_remove,
+	.driver = {
+		.name = "sii902x",
+		.of_match_table = sii902x_dt_ids,
+	},
+	.id_table = sii902x_i2c_ids,
+};
+module_i2c_driver(sii902x_driver);
+
+MODULE_AUTHOR("Boris Brezillon <boris.brezillon@free-electrons.com>");
+MODULE_DESCRIPTION("SII902x RGB -> HDMI bridges");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/bridge/sii9234.c b/drivers/gpu/drm/bridge/sii9234.c
new file mode 100644
index 000000000..c77000626
--- /dev/null
+++ b/drivers/gpu/drm/bridge/sii9234.c
@@ -0,0 +1,994 @@
+/*
+ * Copyright (C) 2017 Samsung Electronics
+ *
+ * Authors:
+ *    Tomasz Stanislawski <t.stanislaws@samsung.com>
+ *    Maciej Purski <m.purski@samsung.com>
+ *
+ * Based on sii9234 driver created by:
+ *    Adam Hampson <ahampson@sta.samsung.com>
+ *    Erik Gilling <konkers@android.com>
+ *    Shankar Bandal <shankar.b@samsung.com>
+ *    Dharam Kumar <dharam.kr@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program
+ *
+ */
+#include <drm/bridge/mhl.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_edid.h>
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+
+#define CBUS_DEVCAP_OFFSET		0x80
+
+#define SII9234_MHL_VERSION		0x11
+#define SII9234_SCRATCHPAD_SIZE		0x10
+#define SII9234_INT_STAT_SIZE		0x33
+
+#define BIT_TMDS_CCTRL_TMDS_OE		BIT(4)
+#define MHL_HPD_OUT_OVR_EN		BIT(4)
+#define MHL_HPD_OUT_OVR_VAL		BIT(5)
+#define MHL_INIT_TIMEOUT		0x0C
+
+/* MHL Tx registers and bits */
+#define MHL_TX_SRST			0x05
+#define MHL_TX_SYSSTAT_REG		0x09
+#define MHL_TX_INTR1_REG		0x71
+#define MHL_TX_INTR4_REG		0x74
+#define MHL_TX_INTR1_ENABLE_REG		0x75
+#define MHL_TX_INTR4_ENABLE_REG		0x78
+#define MHL_TX_INT_CTRL_REG		0x79
+#define MHL_TX_TMDS_CCTRL		0x80
+#define MHL_TX_DISC_CTRL1_REG		0x90
+#define MHL_TX_DISC_CTRL2_REG		0x91
+#define MHL_TX_DISC_CTRL3_REG		0x92
+#define MHL_TX_DISC_CTRL4_REG		0x93
+#define MHL_TX_DISC_CTRL5_REG		0x94
+#define MHL_TX_DISC_CTRL6_REG		0x95
+#define MHL_TX_DISC_CTRL7_REG		0x96
+#define MHL_TX_DISC_CTRL8_REG		0x97
+#define MHL_TX_STAT2_REG		0x99
+#define MHL_TX_MHLTX_CTL1_REG		0xA0
+#define MHL_TX_MHLTX_CTL2_REG		0xA1
+#define MHL_TX_MHLTX_CTL4_REG		0xA3
+#define MHL_TX_MHLTX_CTL6_REG		0xA5
+#define MHL_TX_MHLTX_CTL7_REG		0xA6
+
+#define RSEN_STATUS			BIT(2)
+#define HPD_CHANGE_INT			BIT(6)
+#define RSEN_CHANGE_INT			BIT(5)
+#define RGND_READY_INT			BIT(6)
+#define VBUS_LOW_INT			BIT(5)
+#define CBUS_LKOUT_INT			BIT(4)
+#define MHL_DISC_FAIL_INT		BIT(3)
+#define MHL_EST_INT			BIT(2)
+#define HPD_CHANGE_INT_MASK		BIT(6)
+#define RSEN_CHANGE_INT_MASK		BIT(5)
+
+#define RGND_READY_MASK			BIT(6)
+#define CBUS_LKOUT_MASK			BIT(4)
+#define MHL_DISC_FAIL_MASK		BIT(3)
+#define MHL_EST_MASK			BIT(2)
+
+#define SKIP_GND			BIT(6)
+
+#define ATT_THRESH_SHIFT		0x04
+#define ATT_THRESH_MASK			(0x03 << ATT_THRESH_SHIFT)
+#define USB_D_OEN			BIT(3)
+#define DEGLITCH_TIME_MASK		0x07
+#define DEGLITCH_TIME_2MS		0
+#define DEGLITCH_TIME_4MS		1
+#define DEGLITCH_TIME_8MS		2
+#define DEGLITCH_TIME_16MS		3
+#define DEGLITCH_TIME_40MS		4
+#define DEGLITCH_TIME_50MS		5
+#define DEGLITCH_TIME_60MS		6
+#define DEGLITCH_TIME_128MS		7
+
+#define USB_D_OVR			BIT(7)
+#define USB_ID_OVR			BIT(6)
+#define DVRFLT_SEL			BIT(5)
+#define BLOCK_RGND_INT			BIT(4)
+#define SKIP_DEG			BIT(3)
+#define CI2CA_POL			BIT(2)
+#define CI2CA_WKUP			BIT(1)
+#define SINGLE_ATT			BIT(0)
+
+#define USB_D_ODN			BIT(5)
+#define VBUS_CHECK			BIT(2)
+#define RGND_INTP_MASK			0x03
+#define RGND_INTP_OPEN			0
+#define RGND_INTP_2K			1
+#define RGND_INTP_1K			2
+#define RGND_INTP_SHORT			3
+
+/* HDMI registers */
+#define HDMI_RX_TMDS0_CCTRL1_REG	0x10
+#define HDMI_RX_TMDS_CLK_EN_REG		0x11
+#define HDMI_RX_TMDS_CH_EN_REG		0x12
+#define HDMI_RX_PLL_CALREFSEL_REG	0x17
+#define HDMI_RX_PLL_VCOCAL_REG		0x1A
+#define HDMI_RX_EQ_DATA0_REG		0x22
+#define HDMI_RX_EQ_DATA1_REG		0x23
+#define HDMI_RX_EQ_DATA2_REG		0x24
+#define HDMI_RX_EQ_DATA3_REG		0x25
+#define HDMI_RX_EQ_DATA4_REG		0x26
+#define HDMI_RX_TMDS_ZONE_CTRL_REG	0x4C
+#define HDMI_RX_TMDS_MODE_CTRL_REG	0x4D
+
+/* CBUS registers */
+#define CBUS_INT_STATUS_1_REG		0x08
+#define CBUS_INTR1_ENABLE_REG		0x09
+#define CBUS_MSC_REQ_ABORT_REASON_REG	0x0D
+#define CBUS_INT_STATUS_2_REG		0x1E
+#define CBUS_INTR2_ENABLE_REG		0x1F
+#define CBUS_LINK_CONTROL_2_REG		0x31
+#define CBUS_MHL_STATUS_REG_0		0xB0
+#define CBUS_MHL_STATUS_REG_1		0xB1
+
+#define BIT_CBUS_RESET			BIT(3)
+#define SET_HPD_DOWNSTREAM		BIT(6)
+
+/* TPI registers */
+#define TPI_DPD_REG			0x3D
+
+/* Timeouts in msec */
+#define T_SRC_VBUS_CBUS_TO_STABLE	200
+#define T_SRC_CBUS_FLOAT		100
+#define T_SRC_CBUS_DEGLITCH		2
+#define T_SRC_RXSENSE_DEGLITCH		110
+
+#define MHL1_MAX_CLK			75000 /* in kHz */
+
+#define I2C_TPI_ADDR			0x3D
+#define I2C_HDMI_ADDR			0x49
+#define I2C_CBUS_ADDR			0x64
+
+enum sii9234_state {
+	ST_OFF,
+	ST_D3,
+	ST_RGND_INIT,
+	ST_RGND_1K,
+	ST_RSEN_HIGH,
+	ST_MHL_ESTABLISHED,
+	ST_FAILURE_DISCOVERY,
+	ST_FAILURE,
+};
+
+struct sii9234 {
+	struct i2c_client *client[4];
+	struct drm_bridge bridge;
+	struct device *dev;
+	struct gpio_desc *gpio_reset;
+	int i2c_error;
+	struct regulator_bulk_data supplies[4];
+
+	struct mutex lock; /* Protects fields below and device registers */
+	enum sii9234_state state;
+};
+
+enum sii9234_client_id {
+	I2C_MHL,
+	I2C_TPI,
+	I2C_HDMI,
+	I2C_CBUS,
+};
+
+static const char * const sii9234_client_name[] = {
+	[I2C_MHL] = "MHL",
+	[I2C_TPI] = "TPI",
+	[I2C_HDMI] = "HDMI",
+	[I2C_CBUS] = "CBUS",
+};
+
+static int sii9234_writeb(struct sii9234 *ctx, int id, int offset,
+			  int value)
+{
+	int ret;
+	struct i2c_client *client = ctx->client[id];
+
+	if (ctx->i2c_error)
+		return ctx->i2c_error;
+
+	ret = i2c_smbus_write_byte_data(client, offset, value);
+	if (ret < 0)
+		dev_err(ctx->dev, "writeb: %4s[0x%02x] <- 0x%02x\n",
+			sii9234_client_name[id], offset, value);
+	ctx->i2c_error = ret;
+
+	return ret;
+}
+
+static int sii9234_writebm(struct sii9234 *ctx, int id, int offset,
+			   int value, int mask)
+{
+	int ret;
+	struct i2c_client *client = ctx->client[id];
+
+	if (ctx->i2c_error)
+		return ctx->i2c_error;
+
+	ret = i2c_smbus_write_byte(client, offset);
+	if (ret < 0) {
+		dev_err(ctx->dev, "writebm: %4s[0x%02x] <- 0x%02x\n",
+			sii9234_client_name[id], offset, value);
+		ctx->i2c_error = ret;
+		return ret;
+	}
+
+	ret = i2c_smbus_read_byte(client);
+	if (ret < 0) {
+		dev_err(ctx->dev, "writebm: %4s[0x%02x] <- 0x%02x\n",
+			sii9234_client_name[id], offset, value);
+		ctx->i2c_error = ret;
+		return ret;
+	}
+
+	value = (value & mask) | (ret & ~mask);
+
+	ret = i2c_smbus_write_byte_data(client, offset, value);
+	if (ret < 0) {
+		dev_err(ctx->dev, "writebm: %4s[0x%02x] <- 0x%02x\n",
+			sii9234_client_name[id], offset, value);
+		ctx->i2c_error = ret;
+	}
+
+	return ret;
+}
+
+static int sii9234_readb(struct sii9234 *ctx, int id, int offset)
+{
+	int ret;
+	struct i2c_client *client = ctx->client[id];
+
+	if (ctx->i2c_error)
+		return ctx->i2c_error;
+
+	ret = i2c_smbus_write_byte(client, offset);
+	if (ret < 0) {
+		dev_err(ctx->dev, "readb: %4s[0x%02x]\n",
+			sii9234_client_name[id], offset);
+		ctx->i2c_error = ret;
+		return ret;
+	}
+
+	ret = i2c_smbus_read_byte(client);
+	if (ret < 0) {
+		dev_err(ctx->dev, "readb: %4s[0x%02x]\n",
+			sii9234_client_name[id], offset);
+		ctx->i2c_error = ret;
+	}
+
+	return ret;
+}
+
+static int sii9234_clear_error(struct sii9234 *ctx)
+{
+	int ret = ctx->i2c_error;
+
+	ctx->i2c_error = 0;
+
+	return ret;
+}
+
+#define mhl_tx_writeb(sii9234, offset, value) \
+	sii9234_writeb(sii9234, I2C_MHL, offset, value)
+#define mhl_tx_writebm(sii9234, offset, value, mask) \
+	sii9234_writebm(sii9234, I2C_MHL, offset, value, mask)
+#define mhl_tx_readb(sii9234, offset) \
+	sii9234_readb(sii9234, I2C_MHL, offset)
+#define cbus_writeb(sii9234, offset, value) \
+	sii9234_writeb(sii9234, I2C_CBUS, offset, value)
+#define cbus_writebm(sii9234, offset, value, mask) \
+	sii9234_writebm(sii9234, I2C_CBUS, offset, value, mask)
+#define cbus_readb(sii9234, offset) \
+	sii9234_readb(sii9234, I2C_CBUS, offset)
+#define hdmi_writeb(sii9234, offset, value) \
+	sii9234_writeb(sii9234, I2C_HDMI, offset, value)
+#define hdmi_writebm(sii9234, offset, value, mask) \
+	sii9234_writebm(sii9234, I2C_HDMI, offset, value, mask)
+#define hdmi_readb(sii9234, offset) \
+	sii9234_readb(sii9234, I2C_HDMI, offset)
+#define tpi_writeb(sii9234, offset, value) \
+	sii9234_writeb(sii9234, I2C_TPI, offset, value)
+#define tpi_writebm(sii9234, offset, value, mask) \
+	sii9234_writebm(sii9234, I2C_TPI, offset, value, mask)
+#define tpi_readb(sii9234, offset) \
+	sii9234_readb(sii9234, I2C_TPI, offset)
+
+static u8 sii9234_tmds_control(struct sii9234 *ctx, bool enable)
+{
+	mhl_tx_writebm(ctx, MHL_TX_TMDS_CCTRL, enable ? ~0 : 0,
+		       BIT_TMDS_CCTRL_TMDS_OE);
+	mhl_tx_writebm(ctx, MHL_TX_INT_CTRL_REG, enable ? ~0 : 0,
+		       MHL_HPD_OUT_OVR_EN | MHL_HPD_OUT_OVR_VAL);
+	return sii9234_clear_error(ctx);
+}
+
+static int sii9234_cbus_reset(struct sii9234 *ctx)
+{
+	int i;
+
+	mhl_tx_writebm(ctx, MHL_TX_SRST, ~0, BIT_CBUS_RESET);
+	msleep(T_SRC_CBUS_DEGLITCH);
+	mhl_tx_writebm(ctx, MHL_TX_SRST, 0, BIT_CBUS_RESET);
+
+	for (i = 0; i < 4; i++) {
+		/*
+		 * Enable WRITE_STAT interrupt for writes to all
+		 * 4 MSC Status registers.
+		 */
+		cbus_writeb(ctx, 0xE0 + i, 0xF2);
+		/*
+		 * Enable SET_INT interrupt for writes to all
+		 * 4 MSC Interrupt registers.
+		 */
+		cbus_writeb(ctx, 0xF0 + i, 0xF2);
+	}
+
+	return sii9234_clear_error(ctx);
+}
+
+/* Require to chek mhl imformation of samsung in cbus_init_register */
+static int sii9234_cbus_init(struct sii9234 *ctx)
+{
+	cbus_writeb(ctx, 0x07, 0xF2);
+	cbus_writeb(ctx, 0x40, 0x03);
+	cbus_writeb(ctx, 0x42, 0x06);
+	cbus_writeb(ctx, 0x36, 0x0C);
+	cbus_writeb(ctx, 0x3D, 0xFD);
+	cbus_writeb(ctx, 0x1C, 0x01);
+	cbus_writeb(ctx, 0x1D, 0x0F);
+	cbus_writeb(ctx, 0x44, 0x02);
+	/* Setup our devcap */
+	cbus_writeb(ctx, CBUS_DEVCAP_OFFSET + MHL_DCAP_DEV_STATE, 0x00);
+	cbus_writeb(ctx, CBUS_DEVCAP_OFFSET + MHL_DCAP_MHL_VERSION,
+		    SII9234_MHL_VERSION);
+	cbus_writeb(ctx, CBUS_DEVCAP_OFFSET + MHL_DCAP_CAT,
+		    MHL_DCAP_CAT_SOURCE);
+	cbus_writeb(ctx, CBUS_DEVCAP_OFFSET + MHL_DCAP_ADOPTER_ID_H, 0x01);
+	cbus_writeb(ctx, CBUS_DEVCAP_OFFSET + MHL_DCAP_ADOPTER_ID_L, 0x41);
+	cbus_writeb(ctx, CBUS_DEVCAP_OFFSET + MHL_DCAP_VID_LINK_MODE,
+		    MHL_DCAP_VID_LINK_RGB444 | MHL_DCAP_VID_LINK_YCBCR444);
+	cbus_writeb(ctx, CBUS_DEVCAP_OFFSET + MHL_DCAP_VIDEO_TYPE,
+		    MHL_DCAP_VT_GRAPHICS);
+	cbus_writeb(ctx, CBUS_DEVCAP_OFFSET + MHL_DCAP_LOG_DEV_MAP,
+		    MHL_DCAP_LD_GUI);
+	cbus_writeb(ctx, CBUS_DEVCAP_OFFSET + MHL_DCAP_BANDWIDTH, 0x0F);
+	cbus_writeb(ctx, CBUS_DEVCAP_OFFSET + MHL_DCAP_FEATURE_FLAG,
+		    MHL_DCAP_FEATURE_RCP_SUPPORT | MHL_DCAP_FEATURE_RAP_SUPPORT
+			| MHL_DCAP_FEATURE_SP_SUPPORT);
+	cbus_writeb(ctx, CBUS_DEVCAP_OFFSET + MHL_DCAP_DEVICE_ID_H, 0x0);
+	cbus_writeb(ctx, CBUS_DEVCAP_OFFSET + MHL_DCAP_DEVICE_ID_L, 0x0);
+	cbus_writeb(ctx, CBUS_DEVCAP_OFFSET + MHL_DCAP_SCRATCHPAD_SIZE,
+		    SII9234_SCRATCHPAD_SIZE);
+	cbus_writeb(ctx, CBUS_DEVCAP_OFFSET + MHL_DCAP_INT_STAT_SIZE,
+		    SII9234_INT_STAT_SIZE);
+	cbus_writeb(ctx, CBUS_DEVCAP_OFFSET + MHL_DCAP_RESERVED, 0);
+	cbus_writebm(ctx, 0x31, 0x0C, 0x0C);
+	cbus_writeb(ctx, 0x30, 0x01);
+	cbus_writebm(ctx, 0x3C, 0x30, 0x38);
+	cbus_writebm(ctx, 0x22, 0x0D, 0x0F);
+	cbus_writebm(ctx, 0x2E, 0x15, 0x15);
+	cbus_writeb(ctx, CBUS_INTR1_ENABLE_REG, 0);
+	cbus_writeb(ctx, CBUS_INTR2_ENABLE_REG, 0);
+
+	return sii9234_clear_error(ctx);
+}
+
+static void force_usb_id_switch_open(struct sii9234 *ctx)
+{
+	/* Disable CBUS discovery */
+	mhl_tx_writebm(ctx, MHL_TX_DISC_CTRL1_REG, 0, 0x01);
+	/* Force USB ID switch to open */
+	mhl_tx_writebm(ctx, MHL_TX_DISC_CTRL6_REG, ~0, USB_ID_OVR);
+	mhl_tx_writebm(ctx, MHL_TX_DISC_CTRL3_REG, ~0, 0x86);
+	/* Force upstream HPD to 0 when not in MHL mode. */
+	mhl_tx_writebm(ctx, MHL_TX_INT_CTRL_REG, 0, 0x30);
+}
+
+static void release_usb_id_switch_open(struct sii9234 *ctx)
+{
+	msleep(T_SRC_CBUS_FLOAT);
+	/* Clear USB ID switch to open */
+	mhl_tx_writebm(ctx, MHL_TX_DISC_CTRL6_REG, 0, USB_ID_OVR);
+	/* Enable CBUS discovery */
+	mhl_tx_writebm(ctx, MHL_TX_DISC_CTRL1_REG, ~0, 0x01);
+}
+
+static int sii9234_power_init(struct sii9234 *ctx)
+{
+	/* Force the SiI9234 into the D0 state. */
+	tpi_writeb(ctx, TPI_DPD_REG, 0x3F);
+	/* Enable TxPLL Clock */
+	hdmi_writeb(ctx, HDMI_RX_TMDS_CLK_EN_REG, 0x01);
+	/* Enable Tx Clock Path & Equalizer */
+	hdmi_writeb(ctx, HDMI_RX_TMDS_CH_EN_REG, 0x15);
+	/* Power Up TMDS */
+	mhl_tx_writeb(ctx, 0x08, 0x35);
+	return sii9234_clear_error(ctx);
+}
+
+static int sii9234_hdmi_init(struct sii9234 *ctx)
+{
+	hdmi_writeb(ctx, HDMI_RX_TMDS0_CCTRL1_REG, 0xC1);
+	hdmi_writeb(ctx, HDMI_RX_PLL_CALREFSEL_REG, 0x03);
+	hdmi_writeb(ctx, HDMI_RX_PLL_VCOCAL_REG, 0x20);
+	hdmi_writeb(ctx, HDMI_RX_EQ_DATA0_REG, 0x8A);
+	hdmi_writeb(ctx, HDMI_RX_EQ_DATA1_REG, 0x6A);
+	hdmi_writeb(ctx, HDMI_RX_EQ_DATA2_REG, 0xAA);
+	hdmi_writeb(ctx, HDMI_RX_EQ_DATA3_REG, 0xCA);
+	hdmi_writeb(ctx, HDMI_RX_EQ_DATA4_REG, 0xEA);
+	hdmi_writeb(ctx, HDMI_RX_TMDS_ZONE_CTRL_REG, 0xA0);
+	hdmi_writeb(ctx, HDMI_RX_TMDS_MODE_CTRL_REG, 0x00);
+	mhl_tx_writeb(ctx, MHL_TX_TMDS_CCTRL, 0x34);
+	hdmi_writeb(ctx, 0x45, 0x44);
+	hdmi_writeb(ctx, 0x31, 0x0A);
+	hdmi_writeb(ctx, HDMI_RX_TMDS0_CCTRL1_REG, 0xC1);
+
+	return sii9234_clear_error(ctx);
+}
+
+static int sii9234_mhl_tx_ctl_int(struct sii9234 *ctx)
+{
+	mhl_tx_writeb(ctx, MHL_TX_MHLTX_CTL1_REG, 0xD0);
+	mhl_tx_writeb(ctx, MHL_TX_MHLTX_CTL2_REG, 0xFC);
+	mhl_tx_writeb(ctx, MHL_TX_MHLTX_CTL4_REG, 0xEB);
+	mhl_tx_writeb(ctx, MHL_TX_MHLTX_CTL7_REG, 0x0C);
+
+	return sii9234_clear_error(ctx);
+}
+
+static int sii9234_reset(struct sii9234 *ctx)
+{
+	int ret;
+
+	sii9234_clear_error(ctx);
+
+	ret = sii9234_power_init(ctx);
+	if (ret < 0)
+		return ret;
+	ret = sii9234_cbus_reset(ctx);
+	if (ret < 0)
+		return ret;
+	ret = sii9234_hdmi_init(ctx);
+	if (ret < 0)
+		return ret;
+	ret = sii9234_mhl_tx_ctl_int(ctx);
+	if (ret < 0)
+		return ret;
+
+	/* Enable HDCP Compliance safety */
+	mhl_tx_writeb(ctx, 0x2B, 0x01);
+	/* CBUS discovery cycle time for each drive and float = 150us */
+	mhl_tx_writebm(ctx, MHL_TX_DISC_CTRL1_REG, 0x04, 0x06);
+	/* Clear bit 6 (reg_skip_rgnd) */
+	mhl_tx_writeb(ctx, MHL_TX_DISC_CTRL2_REG, (1 << 7) /* Reserved */
+		      | 2 << ATT_THRESH_SHIFT | DEGLITCH_TIME_50MS);
+	/*
+	 * Changed from 66 to 65 for 94[1:0] = 01 = 5k reg_cbusmhl_pup_sel
+	 * 1.8V CBUS VTH & GND threshold
+	 * to meet CTS 3.3.7.2 spec
+	 */
+	mhl_tx_writeb(ctx, MHL_TX_DISC_CTRL5_REG, 0x77);
+	cbus_writebm(ctx, CBUS_LINK_CONTROL_2_REG, ~0, MHL_INIT_TIMEOUT);
+	mhl_tx_writeb(ctx, MHL_TX_MHLTX_CTL6_REG, 0xA0);
+	/* RGND & single discovery attempt (RGND blocking) */
+	mhl_tx_writeb(ctx, MHL_TX_DISC_CTRL6_REG, BLOCK_RGND_INT |
+		      DVRFLT_SEL | SINGLE_ATT);
+	/* Use VBUS path of discovery state machine */
+	mhl_tx_writeb(ctx, MHL_TX_DISC_CTRL8_REG, 0);
+	/* 0x92[3] sets the CBUS / ID switch */
+	mhl_tx_writebm(ctx, MHL_TX_DISC_CTRL6_REG, ~0, USB_ID_OVR);
+	/*
+	 * To allow RGND engine to operate correctly.
+	 * When moving the chip from D2 to D0 (power up, init regs)
+	 * the values should be
+	 * 94[1:0] = 01  reg_cbusmhl_pup_sel[1:0] should be set for 5k
+	 * 93[7:6] = 10  reg_cbusdisc_pup_sel[1:0] should be
+	 * set for 10k (default)
+	 * 93[5:4] = 00  reg_cbusidle_pup_sel[1:0] = open (default)
+	 */
+	mhl_tx_writebm(ctx, MHL_TX_DISC_CTRL3_REG, ~0, 0x86);
+	/*
+	 * Change from CC to 8C to match 5K
+	 * to meet CTS 3.3.72 spec
+	 */
+	mhl_tx_writebm(ctx, MHL_TX_DISC_CTRL4_REG, ~0, 0x8C);
+	/* Configure the interrupt as active high */
+	mhl_tx_writebm(ctx, MHL_TX_INT_CTRL_REG, 0, 0x06);
+
+	msleep(25);
+
+	/* Release usb_id switch */
+	mhl_tx_writebm(ctx, MHL_TX_DISC_CTRL6_REG, 0,  USB_ID_OVR);
+	mhl_tx_writeb(ctx, MHL_TX_DISC_CTRL1_REG, 0x27);
+
+	ret = sii9234_clear_error(ctx);
+	if (ret < 0)
+		return ret;
+	ret = sii9234_cbus_init(ctx);
+	if (ret < 0)
+		return ret;
+
+	/* Enable Auto soft reset on SCDT = 0 */
+	mhl_tx_writeb(ctx, 0x05, 0x04);
+	/* HDMI Transcode mode enable */
+	mhl_tx_writeb(ctx, 0x0D, 0x1C);
+	mhl_tx_writeb(ctx, MHL_TX_INTR4_ENABLE_REG,
+		      RGND_READY_MASK | CBUS_LKOUT_MASK
+			| MHL_DISC_FAIL_MASK | MHL_EST_MASK);
+	mhl_tx_writeb(ctx, MHL_TX_INTR1_ENABLE_REG, 0x60);
+
+	/* This point is very important before measure RGND impedance */
+	force_usb_id_switch_open(ctx);
+	mhl_tx_writebm(ctx, MHL_TX_DISC_CTRL4_REG, 0, 0xF0);
+	mhl_tx_writebm(ctx, MHL_TX_DISC_CTRL5_REG, 0, 0x03);
+	release_usb_id_switch_open(ctx);
+
+	/* Force upstream HPD to 0 when not in MHL mode */
+	mhl_tx_writebm(ctx, MHL_TX_INT_CTRL_REG, 0, 1 << 5);
+	mhl_tx_writebm(ctx, MHL_TX_INT_CTRL_REG, ~0, 1 << 4);
+
+	return sii9234_clear_error(ctx);
+}
+
+static int sii9234_goto_d3(struct sii9234 *ctx)
+{
+	int ret;
+
+	dev_dbg(ctx->dev, "sii9234: detection started d3\n");
+
+	ret = sii9234_reset(ctx);
+	if (ret < 0)
+		goto exit;
+
+	hdmi_writeb(ctx, 0x01, 0x03);
+	tpi_writebm(ctx, TPI_DPD_REG, 0, 1);
+	/* I2C above is expected to fail because power goes down */
+	sii9234_clear_error(ctx);
+
+	ctx->state = ST_D3;
+
+	return 0;
+ exit:
+	dev_err(ctx->dev, "%s failed\n", __func__);
+	return -1;
+}
+
+static int sii9234_hw_on(struct sii9234 *ctx)
+{
+	return regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+}
+
+static void sii9234_hw_off(struct sii9234 *ctx)
+{
+	gpiod_set_value(ctx->gpio_reset, 1);
+	msleep(20);
+	regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+}
+
+static void sii9234_hw_reset(struct sii9234 *ctx)
+{
+	gpiod_set_value(ctx->gpio_reset, 1);
+	msleep(20);
+	gpiod_set_value(ctx->gpio_reset, 0);
+}
+
+static void sii9234_cable_in(struct sii9234 *ctx)
+{
+	int ret;
+
+	mutex_lock(&ctx->lock);
+	if (ctx->state != ST_OFF)
+		goto unlock;
+	ret = sii9234_hw_on(ctx);
+	if (ret < 0)
+		goto unlock;
+
+	sii9234_hw_reset(ctx);
+	sii9234_goto_d3(ctx);
+	/* To avoid irq storm, when hw is in meta state */
+	enable_irq(to_i2c_client(ctx->dev)->irq);
+
+unlock:
+	mutex_unlock(&ctx->lock);
+}
+
+static void sii9234_cable_out(struct sii9234 *ctx)
+{
+	mutex_lock(&ctx->lock);
+
+	if (ctx->state == ST_OFF)
+		goto unlock;
+
+	disable_irq(to_i2c_client(ctx->dev)->irq);
+	tpi_writeb(ctx, TPI_DPD_REG, 0);
+	/* Turn on&off hpd festure for only QCT HDMI */
+	sii9234_hw_off(ctx);
+
+	ctx->state = ST_OFF;
+
+unlock:
+	mutex_unlock(&ctx->lock);
+}
+
+static enum sii9234_state sii9234_rgnd_ready_irq(struct sii9234 *ctx)
+{
+	int value;
+
+	if (ctx->state == ST_D3) {
+		int ret;
+
+		dev_dbg(ctx->dev, "RGND_READY_INT\n");
+		sii9234_hw_reset(ctx);
+
+		ret = sii9234_reset(ctx);
+		if (ret < 0) {
+			dev_err(ctx->dev, "sii9234_reset() failed\n");
+			return ST_FAILURE;
+		}
+
+		return ST_RGND_INIT;
+	}
+
+	/* Got interrupt in inappropriate state */
+	if (ctx->state != ST_RGND_INIT)
+		return ST_FAILURE;
+
+	value = mhl_tx_readb(ctx, MHL_TX_STAT2_REG);
+	if (sii9234_clear_error(ctx))
+		return ST_FAILURE;
+
+	if ((value & RGND_INTP_MASK) != RGND_INTP_1K) {
+		dev_warn(ctx->dev, "RGND is not 1k\n");
+		return ST_RGND_INIT;
+	}
+	dev_dbg(ctx->dev, "RGND 1K!!\n");
+	mhl_tx_writebm(ctx, MHL_TX_DISC_CTRL4_REG, ~0, 0x8C);
+	mhl_tx_writeb(ctx, MHL_TX_DISC_CTRL5_REG, 0x77);
+	mhl_tx_writebm(ctx, MHL_TX_DISC_CTRL6_REG, ~0, 0x05);
+	if (sii9234_clear_error(ctx))
+		return ST_FAILURE;
+
+	msleep(T_SRC_VBUS_CBUS_TO_STABLE);
+	return ST_RGND_1K;
+}
+
+static enum sii9234_state sii9234_mhl_established(struct sii9234 *ctx)
+{
+	dev_dbg(ctx->dev, "mhl est interrupt\n");
+
+	/* Discovery override */
+	mhl_tx_writeb(ctx, MHL_TX_MHLTX_CTL1_REG, 0x10);
+	/* Increase DDC translation layer timer (byte mode) */
+	cbus_writeb(ctx, 0x07, 0x32);
+	cbus_writebm(ctx, 0x44, ~0, 1 << 1);
+	/* Keep the discovery enabled. Need RGND interrupt */
+	mhl_tx_writebm(ctx, MHL_TX_DISC_CTRL1_REG, ~0, 1);
+	mhl_tx_writeb(ctx, MHL_TX_INTR1_ENABLE_REG,
+		      RSEN_CHANGE_INT_MASK | HPD_CHANGE_INT_MASK);
+
+	if (sii9234_clear_error(ctx))
+		return ST_FAILURE;
+
+	return ST_MHL_ESTABLISHED;
+}
+
+static enum sii9234_state sii9234_hpd_change(struct sii9234 *ctx)
+{
+	int value;
+
+	value = cbus_readb(ctx, CBUS_MSC_REQ_ABORT_REASON_REG);
+	if (sii9234_clear_error(ctx))
+		return ST_FAILURE;
+
+	if (value & SET_HPD_DOWNSTREAM) {
+		/* Downstream HPD High, Enable TMDS */
+		sii9234_tmds_control(ctx, true);
+	} else {
+		/* Downstream HPD Low, Disable TMDS */
+		sii9234_tmds_control(ctx, false);
+	}
+
+	return ctx->state;
+}
+
+static enum sii9234_state sii9234_rsen_change(struct sii9234 *ctx)
+{
+	int value;
+
+	/* Work_around code to handle wrong interrupt */
+	if (ctx->state != ST_RGND_1K) {
+		dev_err(ctx->dev, "RSEN_HIGH without RGND_1K\n");
+		return ST_FAILURE;
+	}
+	value = mhl_tx_readb(ctx, MHL_TX_SYSSTAT_REG);
+	if (value < 0)
+		return ST_FAILURE;
+
+	if (value & RSEN_STATUS) {
+		dev_dbg(ctx->dev, "MHL cable connected.. RSEN High\n");
+		return ST_RSEN_HIGH;
+	}
+	dev_dbg(ctx->dev, "RSEN lost\n");
+	/*
+	 * Once RSEN loss is confirmed,we need to check
+	 * based on cable status and chip power status,whether
+	 * it is SINK Loss(HDMI cable not connected, TV Off)
+	 * or MHL cable disconnection
+	 * TODO: Define the below mhl_disconnection()
+	 */
+	msleep(T_SRC_RXSENSE_DEGLITCH);
+	value = mhl_tx_readb(ctx, MHL_TX_SYSSTAT_REG);
+	if (value < 0)
+		return ST_FAILURE;
+	dev_dbg(ctx->dev, "sys_stat: %x\n", value);
+
+	if (value & RSEN_STATUS) {
+		dev_dbg(ctx->dev, "RSEN recovery\n");
+		return ST_RSEN_HIGH;
+	}
+	dev_dbg(ctx->dev, "RSEN Really LOW\n");
+	/* To meet CTS 3.3.22.2 spec */
+	sii9234_tmds_control(ctx, false);
+	force_usb_id_switch_open(ctx);
+	release_usb_id_switch_open(ctx);
+
+	return ST_FAILURE;
+}
+
+static irqreturn_t sii9234_irq_thread(int irq, void *data)
+{
+	struct sii9234 *ctx = data;
+	int intr1, intr4;
+	int intr1_en, intr4_en;
+	int cbus_intr1, cbus_intr2;
+
+	dev_dbg(ctx->dev, "%s\n", __func__);
+
+	mutex_lock(&ctx->lock);
+
+	intr1 = mhl_tx_readb(ctx, MHL_TX_INTR1_REG);
+	intr4 = mhl_tx_readb(ctx, MHL_TX_INTR4_REG);
+	intr1_en = mhl_tx_readb(ctx, MHL_TX_INTR1_ENABLE_REG);
+	intr4_en = mhl_tx_readb(ctx, MHL_TX_INTR4_ENABLE_REG);
+	cbus_intr1 = cbus_readb(ctx, CBUS_INT_STATUS_1_REG);
+	cbus_intr2 = cbus_readb(ctx, CBUS_INT_STATUS_2_REG);
+
+	if (sii9234_clear_error(ctx))
+		goto done;
+
+	dev_dbg(ctx->dev, "irq %02x/%02x %02x/%02x %02x/%02x\n",
+		intr1, intr1_en, intr4, intr4_en, cbus_intr1, cbus_intr2);
+
+	if (intr4 & RGND_READY_INT)
+		ctx->state = sii9234_rgnd_ready_irq(ctx);
+	if (intr1 & RSEN_CHANGE_INT)
+		ctx->state = sii9234_rsen_change(ctx);
+	if (intr4 & MHL_EST_INT)
+		ctx->state = sii9234_mhl_established(ctx);
+	if (intr1 & HPD_CHANGE_INT)
+		ctx->state = sii9234_hpd_change(ctx);
+	if (intr4 & CBUS_LKOUT_INT)
+		ctx->state = ST_FAILURE;
+	if (intr4 & MHL_DISC_FAIL_INT)
+		ctx->state = ST_FAILURE_DISCOVERY;
+
+ done:
+	/* Clean interrupt status and pending flags */
+	mhl_tx_writeb(ctx, MHL_TX_INTR1_REG, intr1);
+	mhl_tx_writeb(ctx, MHL_TX_INTR4_REG, intr4);
+	cbus_writeb(ctx, CBUS_MHL_STATUS_REG_0, 0xFF);
+	cbus_writeb(ctx, CBUS_MHL_STATUS_REG_1, 0xFF);
+	cbus_writeb(ctx, CBUS_INT_STATUS_1_REG, cbus_intr1);
+	cbus_writeb(ctx, CBUS_INT_STATUS_2_REG, cbus_intr2);
+
+	sii9234_clear_error(ctx);
+
+	if (ctx->state == ST_FAILURE) {
+		dev_dbg(ctx->dev, "try to reset after failure\n");
+		sii9234_hw_reset(ctx);
+		sii9234_goto_d3(ctx);
+	}
+
+	if (ctx->state == ST_FAILURE_DISCOVERY) {
+		dev_err(ctx->dev, "discovery failed, no power for MHL?\n");
+		tpi_writebm(ctx, TPI_DPD_REG, 0, 1);
+		ctx->state = ST_D3;
+	}
+
+	mutex_unlock(&ctx->lock);
+
+	return IRQ_HANDLED;
+}
+
+static int sii9234_init_resources(struct sii9234 *ctx,
+				  struct i2c_client *client)
+{
+	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
+	int ret;
+
+	if (!ctx->dev->of_node) {
+		dev_err(ctx->dev, "not DT device\n");
+		return -ENODEV;
+	}
+
+	ctx->gpio_reset = devm_gpiod_get(ctx->dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(ctx->gpio_reset)) {
+		dev_err(ctx->dev, "failed to get reset gpio from DT\n");
+		return PTR_ERR(ctx->gpio_reset);
+	}
+
+	ctx->supplies[0].supply = "avcc12";
+	ctx->supplies[1].supply = "avcc33";
+	ctx->supplies[2].supply = "iovcc18";
+	ctx->supplies[3].supply = "cvcc12";
+	ret = devm_regulator_bulk_get(ctx->dev, 4, ctx->supplies);
+	if (ret) {
+		dev_err(ctx->dev, "regulator_bulk failed\n");
+		return ret;
+	}
+
+	ctx->client[I2C_MHL] = client;
+
+	ctx->client[I2C_TPI] = i2c_new_dummy(adapter, I2C_TPI_ADDR);
+	if (!ctx->client[I2C_TPI]) {
+		dev_err(ctx->dev, "failed to create TPI client\n");
+		return -ENODEV;
+	}
+
+	ctx->client[I2C_HDMI] = i2c_new_dummy(adapter, I2C_HDMI_ADDR);
+	if (!ctx->client[I2C_HDMI]) {
+		dev_err(ctx->dev, "failed to create HDMI RX client\n");
+		goto fail_tpi;
+	}
+
+	ctx->client[I2C_CBUS] = i2c_new_dummy(adapter, I2C_CBUS_ADDR);
+	if (!ctx->client[I2C_CBUS]) {
+		dev_err(ctx->dev, "failed to create CBUS client\n");
+		goto fail_hdmi;
+	}
+
+	return 0;
+
+fail_hdmi:
+	i2c_unregister_device(ctx->client[I2C_HDMI]);
+fail_tpi:
+	i2c_unregister_device(ctx->client[I2C_TPI]);
+
+	return -ENODEV;
+}
+
+static void sii9234_deinit_resources(struct sii9234 *ctx)
+{
+	i2c_unregister_device(ctx->client[I2C_CBUS]);
+	i2c_unregister_device(ctx->client[I2C_HDMI]);
+	i2c_unregister_device(ctx->client[I2C_TPI]);
+}
+
+static inline struct sii9234 *bridge_to_sii9234(struct drm_bridge *bridge)
+{
+	return container_of(bridge, struct sii9234, bridge);
+}
+
+static enum drm_mode_status sii9234_mode_valid(struct drm_bridge *bridge,
+					 const struct drm_display_mode *mode)
+{
+	if (mode->clock > MHL1_MAX_CLK)
+		return MODE_CLOCK_HIGH;
+
+	return MODE_OK;
+}
+
+static const struct drm_bridge_funcs sii9234_bridge_funcs = {
+	.mode_valid = sii9234_mode_valid,
+};
+
+static int sii9234_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
+	struct sii9234 *ctx;
+	struct device *dev = &client->dev;
+	int ret;
+
+	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	ctx->dev = dev;
+	mutex_init(&ctx->lock);
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
+		dev_err(dev, "I2C adapter lacks SMBUS feature\n");
+		return -EIO;
+	}
+
+	if (!client->irq) {
+		dev_err(dev, "no irq provided\n");
+		return -EINVAL;
+	}
+
+	irq_set_status_flags(client->irq, IRQ_NOAUTOEN);
+	ret = devm_request_threaded_irq(dev, client->irq, NULL,
+					sii9234_irq_thread,
+					IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+					"sii9234", ctx);
+	if (ret < 0) {
+		dev_err(dev, "failed to install IRQ handler\n");
+		return ret;
+	}
+
+	ret = sii9234_init_resources(ctx, client);
+	if (ret < 0)
+		return ret;
+
+	i2c_set_clientdata(client, ctx);
+
+	ctx->bridge.funcs = &sii9234_bridge_funcs;
+	ctx->bridge.of_node = dev->of_node;
+	drm_bridge_add(&ctx->bridge);
+
+	sii9234_cable_in(ctx);
+
+	return 0;
+}
+
+static int sii9234_remove(struct i2c_client *client)
+{
+	struct sii9234 *ctx = i2c_get_clientdata(client);
+
+	sii9234_cable_out(ctx);
+	drm_bridge_remove(&ctx->bridge);
+	sii9234_deinit_resources(ctx);
+
+	return 0;
+}
+
+static const struct of_device_id sii9234_dt_match[] = {
+	{ .compatible = "sil,sii9234" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, sii9234_dt_match);
+
+static const struct i2c_device_id sii9234_id[] = {
+	{ "SII9234", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, sii9234_id);
+
+static struct i2c_driver sii9234_driver = {
+	.driver = {
+		.name	= "sii9234",
+		.of_match_table = sii9234_dt_match,
+	},
+	.probe = sii9234_probe,
+	.remove = sii9234_remove,
+	.id_table = sii9234_id,
+};
+
+module_i2c_driver(sii9234_driver);
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/bridge/sil-sii8620.c b/drivers/gpu/drm/bridge/sil-sii8620.c
new file mode 100644
index 000000000..ea433bb18
--- /dev/null
+++ b/drivers/gpu/drm/bridge/sil-sii8620.c
@@ -0,0 +1,2390 @@
+/*
+ * Silicon Image SiI8620 HDMI/MHL bridge driver
+ *
+ * Copyright (C) 2015, Samsung Electronics Co., Ltd.
+ * Andrzej Hajda <a.hajda@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <asm/unaligned.h>
+
+#include <drm/bridge/mhl.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_edid.h>
+#include <drm/drm_encoder.h>
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/extcon.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_graph.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+
+#include <media/rc-core.h>
+
+#include "sil-sii8620.h"
+
+#define SII8620_BURST_BUF_LEN 288
+#define VAL_RX_HDMI_CTRL2_DEFVAL VAL_RX_HDMI_CTRL2_IDLE_CNT(3)
+
+#define MHL1_MAX_PCLK 75000
+#define MHL1_MAX_PCLK_PP_MODE 150000
+#define MHL3_MAX_PCLK 200000
+#define MHL3_MAX_PCLK_PP_MODE 300000
+
+enum sii8620_mode {
+	CM_DISCONNECTED,
+	CM_DISCOVERY,
+	CM_MHL1,
+	CM_MHL3,
+	CM_ECBUS_S
+};
+
+enum sii8620_sink_type {
+	SINK_NONE,
+	SINK_HDMI,
+	SINK_DVI
+};
+
+enum sii8620_mt_state {
+	MT_STATE_READY,
+	MT_STATE_BUSY,
+	MT_STATE_DONE
+};
+
+struct sii8620 {
+	struct drm_bridge bridge;
+	struct device *dev;
+	struct rc_dev *rc_dev;
+	struct clk *clk_xtal;
+	struct gpio_desc *gpio_reset;
+	struct gpio_desc *gpio_int;
+	struct regulator_bulk_data supplies[2];
+	struct mutex lock; /* context lock, protects fields below */
+	int error;
+	unsigned int use_packed_pixel:1;
+	enum sii8620_mode mode;
+	enum sii8620_sink_type sink_type;
+	u8 cbus_status;
+	u8 stat[MHL_DST_SIZE];
+	u8 xstat[MHL_XDS_SIZE];
+	u8 devcap[MHL_DCAP_SIZE];
+	u8 xdevcap[MHL_XDC_SIZE];
+	bool feature_complete;
+	bool devcap_read;
+	bool sink_detected;
+	struct edid *edid;
+	unsigned int gen2_write_burst:1;
+	enum sii8620_mt_state mt_state;
+	struct extcon_dev *extcon;
+	struct notifier_block extcon_nb;
+	struct work_struct extcon_wq;
+	int cable_state;
+	struct list_head mt_queue;
+	struct {
+		int r_size;
+		int r_count;
+		int rx_ack;
+		int rx_count;
+		u8 rx_buf[32];
+		int tx_count;
+		u8 tx_buf[32];
+	} burst;
+};
+
+struct sii8620_mt_msg;
+
+typedef void (*sii8620_mt_msg_cb)(struct sii8620 *ctx,
+				  struct sii8620_mt_msg *msg);
+
+typedef void (*sii8620_cb)(struct sii8620 *ctx, int ret);
+
+struct sii8620_mt_msg {
+	struct list_head node;
+	u8 reg[4];
+	u8 ret;
+	sii8620_mt_msg_cb send;
+	sii8620_mt_msg_cb recv;
+	sii8620_cb continuation;
+};
+
+static const u8 sii8620_i2c_page[] = {
+	0x39, /* Main System */
+	0x3d, /* TDM and HSIC */
+	0x49, /* TMDS Receiver, MHL EDID */
+	0x4d, /* eMSC, HDCP, HSIC */
+	0x5d, /* MHL Spec */
+	0x64, /* MHL CBUS */
+	0x59, /* Hardware TPI (Transmitter Programming Interface) */
+	0x61, /* eCBUS-S, eCBUS-D */
+};
+
+static void sii8620_fetch_edid(struct sii8620 *ctx);
+static void sii8620_set_upstream_edid(struct sii8620 *ctx);
+static void sii8620_enable_hpd(struct sii8620 *ctx);
+static void sii8620_mhl_disconnected(struct sii8620 *ctx);
+static void sii8620_disconnect(struct sii8620 *ctx);
+
+static int sii8620_clear_error(struct sii8620 *ctx)
+{
+	int ret = ctx->error;
+
+	ctx->error = 0;
+	return ret;
+}
+
+static void sii8620_read_buf(struct sii8620 *ctx, u16 addr, u8 *buf, int len)
+{
+	struct device *dev = ctx->dev;
+	struct i2c_client *client = to_i2c_client(dev);
+	u8 data = addr;
+	struct i2c_msg msg[] = {
+		{
+			.addr = sii8620_i2c_page[addr >> 8],
+			.flags = client->flags,
+			.len = 1,
+			.buf = &data
+		},
+		{
+			.addr = sii8620_i2c_page[addr >> 8],
+			.flags = client->flags | I2C_M_RD,
+			.len = len,
+			.buf = buf
+		},
+	};
+	int ret;
+
+	if (ctx->error)
+		return;
+
+	ret = i2c_transfer(client->adapter, msg, 2);
+	dev_dbg(dev, "read at %04x: %*ph, %d\n", addr, len, buf, ret);
+
+	if (ret != 2) {
+		dev_err(dev, "Read at %#06x of %d bytes failed with code %d.\n",
+			addr, len, ret);
+		ctx->error = ret < 0 ? ret : -EIO;
+	}
+}
+
+static u8 sii8620_readb(struct sii8620 *ctx, u16 addr)
+{
+	u8 ret = 0;
+
+	sii8620_read_buf(ctx, addr, &ret, 1);
+	return ret;
+}
+
+static void sii8620_write_buf(struct sii8620 *ctx, u16 addr, const u8 *buf,
+			      int len)
+{
+	struct device *dev = ctx->dev;
+	struct i2c_client *client = to_i2c_client(dev);
+	u8 data[2];
+	struct i2c_msg msg = {
+		.addr = sii8620_i2c_page[addr >> 8],
+		.flags = client->flags,
+		.len = len + 1,
+	};
+	int ret;
+
+	if (ctx->error)
+		return;
+
+	if (len > 1) {
+		msg.buf = kmalloc(len + 1, GFP_KERNEL);
+		if (!msg.buf) {
+			ctx->error = -ENOMEM;
+			return;
+		}
+		memcpy(msg.buf + 1, buf, len);
+	} else {
+		msg.buf = data;
+		msg.buf[1] = *buf;
+	}
+
+	msg.buf[0] = addr;
+
+	ret = i2c_transfer(client->adapter, &msg, 1);
+	dev_dbg(dev, "write at %04x: %*ph, %d\n", addr, len, buf, ret);
+
+	if (ret != 1) {
+		dev_err(dev, "Write at %#06x of %*ph failed with code %d.\n",
+			addr, len, buf, ret);
+		ctx->error = ret ?: -EIO;
+	}
+
+	if (len > 1)
+		kfree(msg.buf);
+}
+
+#define sii8620_write(ctx, addr, arr...) \
+({\
+	u8 d[] = { arr }; \
+	sii8620_write_buf(ctx, addr, d, ARRAY_SIZE(d)); \
+})
+
+static void __sii8620_write_seq(struct sii8620 *ctx, const u16 *seq, int len)
+{
+	int i;
+
+	for (i = 0; i < len; i += 2)
+		sii8620_write(ctx, seq[i], seq[i + 1]);
+}
+
+#define sii8620_write_seq(ctx, seq...) \
+({\
+	const u16 d[] = { seq }; \
+	__sii8620_write_seq(ctx, d, ARRAY_SIZE(d)); \
+})
+
+#define sii8620_write_seq_static(ctx, seq...) \
+({\
+	static const u16 d[] = { seq }; \
+	__sii8620_write_seq(ctx, d, ARRAY_SIZE(d)); \
+})
+
+static void sii8620_setbits(struct sii8620 *ctx, u16 addr, u8 mask, u8 val)
+{
+	val = (val & mask) | (sii8620_readb(ctx, addr) & ~mask);
+	sii8620_write(ctx, addr, val);
+}
+
+static inline bool sii8620_is_mhl3(struct sii8620 *ctx)
+{
+	return ctx->mode >= CM_MHL3;
+}
+
+static void sii8620_mt_cleanup(struct sii8620 *ctx)
+{
+	struct sii8620_mt_msg *msg, *n;
+
+	list_for_each_entry_safe(msg, n, &ctx->mt_queue, node) {
+		list_del(&msg->node);
+		kfree(msg);
+	}
+	ctx->mt_state = MT_STATE_READY;
+}
+
+static void sii8620_mt_work(struct sii8620 *ctx)
+{
+	struct sii8620_mt_msg *msg;
+
+	if (ctx->error)
+		return;
+	if (ctx->mt_state == MT_STATE_BUSY || list_empty(&ctx->mt_queue))
+		return;
+
+	if (ctx->mt_state == MT_STATE_DONE) {
+		ctx->mt_state = MT_STATE_READY;
+		msg = list_first_entry(&ctx->mt_queue, struct sii8620_mt_msg,
+				       node);
+		list_del(&msg->node);
+		if (msg->recv)
+			msg->recv(ctx, msg);
+		if (msg->continuation)
+			msg->continuation(ctx, msg->ret);
+		kfree(msg);
+	}
+
+	if (ctx->mt_state != MT_STATE_READY || list_empty(&ctx->mt_queue))
+		return;
+
+	ctx->mt_state = MT_STATE_BUSY;
+	msg = list_first_entry(&ctx->mt_queue, struct sii8620_mt_msg, node);
+	if (msg->send)
+		msg->send(ctx, msg);
+}
+
+static void sii8620_enable_gen2_write_burst(struct sii8620 *ctx)
+{
+	u8 ctrl = BIT_MDT_RCV_CTRL_MDT_RCV_EN;
+
+	if (ctx->gen2_write_burst)
+		return;
+
+	if (ctx->mode >= CM_MHL1)
+		ctrl |= BIT_MDT_RCV_CTRL_MDT_DELAY_RCV_EN;
+
+	sii8620_write_seq(ctx,
+		REG_MDT_RCV_TIMEOUT, 100,
+		REG_MDT_RCV_CTRL, ctrl
+	);
+	ctx->gen2_write_burst = 1;
+}
+
+static void sii8620_disable_gen2_write_burst(struct sii8620 *ctx)
+{
+	if (!ctx->gen2_write_burst)
+		return;
+
+	sii8620_write_seq_static(ctx,
+		REG_MDT_XMIT_CTRL, 0,
+		REG_MDT_RCV_CTRL, 0
+	);
+	ctx->gen2_write_burst = 0;
+}
+
+static void sii8620_start_gen2_write_burst(struct sii8620 *ctx)
+{
+	sii8620_write_seq_static(ctx,
+		REG_MDT_INT_1_MASK, BIT_MDT_RCV_TIMEOUT
+			| BIT_MDT_RCV_SM_ABORT_PKT_RCVD | BIT_MDT_RCV_SM_ERROR
+			| BIT_MDT_XMIT_TIMEOUT | BIT_MDT_XMIT_SM_ABORT_PKT_RCVD
+			| BIT_MDT_XMIT_SM_ERROR,
+		REG_MDT_INT_0_MASK, BIT_MDT_XFIFO_EMPTY
+			| BIT_MDT_IDLE_AFTER_HAWB_DISABLE
+			| BIT_MDT_RFIFO_DATA_RDY
+	);
+	sii8620_enable_gen2_write_burst(ctx);
+}
+
+static void sii8620_mt_msc_cmd_send(struct sii8620 *ctx,
+				    struct sii8620_mt_msg *msg)
+{
+	if (msg->reg[0] == MHL_SET_INT &&
+	    msg->reg[1] == MHL_INT_REG(RCHANGE) &&
+	    msg->reg[2] == MHL_INT_RC_FEAT_REQ)
+		sii8620_enable_gen2_write_burst(ctx);
+	else
+		sii8620_disable_gen2_write_burst(ctx);
+
+	switch (msg->reg[0]) {
+	case MHL_WRITE_STAT:
+	case MHL_SET_INT:
+		sii8620_write_buf(ctx, REG_MSC_CMD_OR_OFFSET, msg->reg + 1, 2);
+		sii8620_write(ctx, REG_MSC_COMMAND_START,
+			      BIT_MSC_COMMAND_START_WRITE_STAT);
+		break;
+	case MHL_MSC_MSG:
+		sii8620_write_buf(ctx, REG_MSC_CMD_OR_OFFSET, msg->reg, 3);
+		sii8620_write(ctx, REG_MSC_COMMAND_START,
+			      BIT_MSC_COMMAND_START_MSC_MSG);
+		break;
+	case MHL_READ_DEVCAP_REG:
+	case MHL_READ_XDEVCAP_REG:
+		sii8620_write(ctx, REG_MSC_CMD_OR_OFFSET, msg->reg[1]);
+		sii8620_write(ctx, REG_MSC_COMMAND_START,
+			      BIT_MSC_COMMAND_START_READ_DEVCAP);
+		break;
+	default:
+		dev_err(ctx->dev, "%s: command %#x not supported\n", __func__,
+			msg->reg[0]);
+	}
+}
+
+static struct sii8620_mt_msg *sii8620_mt_msg_new(struct sii8620 *ctx)
+{
+	struct sii8620_mt_msg *msg = kzalloc(sizeof(*msg), GFP_KERNEL);
+
+	if (!msg)
+		ctx->error = -ENOMEM;
+	else
+		list_add_tail(&msg->node, &ctx->mt_queue);
+
+	return msg;
+}
+
+static void sii8620_mt_set_cont(struct sii8620 *ctx, sii8620_cb cont)
+{
+	struct sii8620_mt_msg *msg;
+
+	if (ctx->error)
+		return;
+
+	if (list_empty(&ctx->mt_queue)) {
+		ctx->error = -EINVAL;
+		return;
+	}
+	msg = list_last_entry(&ctx->mt_queue, struct sii8620_mt_msg, node);
+	msg->continuation = cont;
+}
+
+static void sii8620_mt_msc_cmd(struct sii8620 *ctx, u8 cmd, u8 arg1, u8 arg2)
+{
+	struct sii8620_mt_msg *msg = sii8620_mt_msg_new(ctx);
+
+	if (!msg)
+		return;
+
+	msg->reg[0] = cmd;
+	msg->reg[1] = arg1;
+	msg->reg[2] = arg2;
+	msg->send = sii8620_mt_msc_cmd_send;
+}
+
+static void sii8620_mt_write_stat(struct sii8620 *ctx, u8 reg, u8 val)
+{
+	sii8620_mt_msc_cmd(ctx, MHL_WRITE_STAT, reg, val);
+}
+
+static inline void sii8620_mt_set_int(struct sii8620 *ctx, u8 irq, u8 mask)
+{
+	sii8620_mt_msc_cmd(ctx, MHL_SET_INT, irq, mask);
+}
+
+static void sii8620_mt_msc_msg(struct sii8620 *ctx, u8 cmd, u8 data)
+{
+	sii8620_mt_msc_cmd(ctx, MHL_MSC_MSG, cmd, data);
+}
+
+static void sii8620_mt_rap(struct sii8620 *ctx, u8 code)
+{
+	sii8620_mt_msc_msg(ctx, MHL_MSC_MSG_RAP, code);
+}
+
+static void sii8620_mt_rcpk(struct sii8620 *ctx, u8 code)
+{
+	sii8620_mt_msc_msg(ctx, MHL_MSC_MSG_RCPK, code);
+}
+
+static void sii8620_mt_rcpe(struct sii8620 *ctx, u8 code)
+{
+	sii8620_mt_msc_msg(ctx, MHL_MSC_MSG_RCPE, code);
+}
+
+static void sii8620_mt_read_devcap_send(struct sii8620 *ctx,
+					struct sii8620_mt_msg *msg)
+{
+	u8 ctrl = BIT_EDID_CTRL_DEVCAP_SELECT_DEVCAP
+			| BIT_EDID_CTRL_EDID_FIFO_ADDR_AUTO
+			| BIT_EDID_CTRL_EDID_MODE_EN;
+
+	if (msg->reg[0] == MHL_READ_XDEVCAP)
+		ctrl |= BIT_EDID_CTRL_XDEVCAP_EN;
+
+	sii8620_write_seq(ctx,
+		REG_INTR9_MASK, BIT_INTR9_DEVCAP_DONE,
+		REG_EDID_CTRL, ctrl,
+		REG_TPI_CBUS_START, BIT_TPI_CBUS_START_GET_DEVCAP_START
+	);
+}
+
+/* copy src to dst and set changed bits in src */
+static void sii8620_update_array(u8 *dst, u8 *src, int count)
+{
+	while (--count >= 0) {
+		*src ^= *dst;
+		*dst++ ^= *src++;
+	}
+}
+
+static void sii8620_identify_sink(struct sii8620 *ctx)
+{
+	static const char * const sink_str[] = {
+		[SINK_NONE] = "NONE",
+		[SINK_HDMI] = "HDMI",
+		[SINK_DVI] = "DVI"
+	};
+
+	char sink_name[20];
+	struct device *dev = ctx->dev;
+
+	if (!ctx->sink_detected || !ctx->devcap_read)
+		return;
+
+	sii8620_fetch_edid(ctx);
+	if (!ctx->edid) {
+		dev_err(ctx->dev, "Cannot fetch EDID\n");
+		sii8620_mhl_disconnected(ctx);
+		return;
+	}
+	sii8620_set_upstream_edid(ctx);
+
+	if (drm_detect_hdmi_monitor(ctx->edid))
+		ctx->sink_type = SINK_HDMI;
+	else
+		ctx->sink_type = SINK_DVI;
+
+	drm_edid_get_monitor_name(ctx->edid, sink_name, ARRAY_SIZE(sink_name));
+
+	dev_info(dev, "detected sink(type: %s): %s\n",
+		 sink_str[ctx->sink_type], sink_name);
+}
+
+static void sii8620_mr_devcap(struct sii8620 *ctx)
+{
+	u8 dcap[MHL_DCAP_SIZE];
+	struct device *dev = ctx->dev;
+
+	sii8620_read_buf(ctx, REG_EDID_FIFO_RD_DATA, dcap, MHL_DCAP_SIZE);
+	if (ctx->error < 0)
+		return;
+
+	dev_info(dev, "detected dongle MHL %d.%d, ChipID %02x%02x:%02x%02x\n",
+		 dcap[MHL_DCAP_MHL_VERSION] / 16,
+		 dcap[MHL_DCAP_MHL_VERSION] % 16,
+		 dcap[MHL_DCAP_ADOPTER_ID_H], dcap[MHL_DCAP_ADOPTER_ID_L],
+		 dcap[MHL_DCAP_DEVICE_ID_H], dcap[MHL_DCAP_DEVICE_ID_L]);
+	sii8620_update_array(ctx->devcap, dcap, MHL_DCAP_SIZE);
+	ctx->devcap_read = true;
+	sii8620_identify_sink(ctx);
+}
+
+static void sii8620_mr_xdevcap(struct sii8620 *ctx)
+{
+	sii8620_read_buf(ctx, REG_EDID_FIFO_RD_DATA, ctx->xdevcap,
+			 MHL_XDC_SIZE);
+}
+
+static void sii8620_mt_read_devcap_recv(struct sii8620 *ctx,
+					struct sii8620_mt_msg *msg)
+{
+	u8 ctrl = BIT_EDID_CTRL_DEVCAP_SELECT_DEVCAP
+		| BIT_EDID_CTRL_EDID_FIFO_ADDR_AUTO
+		| BIT_EDID_CTRL_EDID_MODE_EN;
+
+	if (msg->reg[0] == MHL_READ_XDEVCAP)
+		ctrl |= BIT_EDID_CTRL_XDEVCAP_EN;
+
+	sii8620_write_seq(ctx,
+		REG_INTR9_MASK, BIT_INTR9_DEVCAP_DONE | BIT_INTR9_EDID_DONE
+			| BIT_INTR9_EDID_ERROR,
+		REG_EDID_CTRL, ctrl,
+		REG_EDID_FIFO_ADDR, 0
+	);
+
+	if (msg->reg[0] == MHL_READ_XDEVCAP)
+		sii8620_mr_xdevcap(ctx);
+	else
+		sii8620_mr_devcap(ctx);
+}
+
+static void sii8620_mt_read_devcap(struct sii8620 *ctx, bool xdevcap)
+{
+	struct sii8620_mt_msg *msg = sii8620_mt_msg_new(ctx);
+
+	if (!msg)
+		return;
+
+	msg->reg[0] = xdevcap ? MHL_READ_XDEVCAP : MHL_READ_DEVCAP;
+	msg->send = sii8620_mt_read_devcap_send;
+	msg->recv = sii8620_mt_read_devcap_recv;
+}
+
+static void sii8620_mt_read_devcap_reg_recv(struct sii8620 *ctx,
+		struct sii8620_mt_msg *msg)
+{
+	u8 reg = msg->reg[1] & 0x7f;
+
+	if (msg->reg[1] & 0x80)
+		ctx->xdevcap[reg] = msg->ret;
+	else
+		ctx->devcap[reg] = msg->ret;
+}
+
+static void sii8620_mt_read_devcap_reg(struct sii8620 *ctx, u8 reg)
+{
+	struct sii8620_mt_msg *msg = sii8620_mt_msg_new(ctx);
+
+	if (!msg)
+		return;
+
+	msg->reg[0] = (reg & 0x80) ? MHL_READ_XDEVCAP_REG : MHL_READ_DEVCAP_REG;
+	msg->reg[1] = reg;
+	msg->send = sii8620_mt_msc_cmd_send;
+	msg->recv = sii8620_mt_read_devcap_reg_recv;
+}
+
+static inline void sii8620_mt_read_xdevcap_reg(struct sii8620 *ctx, u8 reg)
+{
+	sii8620_mt_read_devcap_reg(ctx, reg | 0x80);
+}
+
+static void *sii8620_burst_get_tx_buf(struct sii8620 *ctx, int len)
+{
+	u8 *buf = &ctx->burst.tx_buf[ctx->burst.tx_count];
+	int size = len + 2;
+
+	if (ctx->burst.tx_count + size > ARRAY_SIZE(ctx->burst.tx_buf)) {
+		dev_err(ctx->dev, "TX-BLK buffer exhausted\n");
+		ctx->error = -EINVAL;
+		return NULL;
+	}
+
+	ctx->burst.tx_count += size;
+	buf[1] = len;
+
+	return buf + 2;
+}
+
+static u8 *sii8620_burst_get_rx_buf(struct sii8620 *ctx, int len)
+{
+	u8 *buf = &ctx->burst.rx_buf[ctx->burst.rx_count];
+	int size = len + 1;
+
+	if (ctx->burst.tx_count + size > ARRAY_SIZE(ctx->burst.tx_buf)) {
+		dev_err(ctx->dev, "RX-BLK buffer exhausted\n");
+		ctx->error = -EINVAL;
+		return NULL;
+	}
+
+	ctx->burst.rx_count += size;
+	buf[0] = len;
+
+	return buf + 1;
+}
+
+static void sii8620_burst_send(struct sii8620 *ctx)
+{
+	int tx_left = ctx->burst.tx_count;
+	u8 *d = ctx->burst.tx_buf;
+
+	while (tx_left > 0) {
+		int len = d[1] + 2;
+
+		if (ctx->burst.r_count + len > ctx->burst.r_size)
+			break;
+		d[0] = min(ctx->burst.rx_ack, 255);
+		ctx->burst.rx_ack -= d[0];
+		sii8620_write_buf(ctx, REG_EMSC_XMIT_WRITE_PORT, d, len);
+		ctx->burst.r_count += len;
+		tx_left -= len;
+		d += len;
+	}
+
+	ctx->burst.tx_count = tx_left;
+
+	while (ctx->burst.rx_ack > 0) {
+		u8 b[2] = { min(ctx->burst.rx_ack, 255), 0 };
+
+		if (ctx->burst.r_count + 2 > ctx->burst.r_size)
+			break;
+		ctx->burst.rx_ack -= b[0];
+		sii8620_write_buf(ctx, REG_EMSC_XMIT_WRITE_PORT, b, 2);
+		ctx->burst.r_count += 2;
+	}
+}
+
+static void sii8620_burst_receive(struct sii8620 *ctx)
+{
+	u8 buf[3], *d;
+	int count;
+
+	sii8620_read_buf(ctx, REG_EMSCRFIFOBCNTL, buf, 2);
+	count = get_unaligned_le16(buf);
+	while (count > 0) {
+		int len = min(count, 3);
+
+		sii8620_read_buf(ctx, REG_EMSC_RCV_READ_PORT, buf, len);
+		count -= len;
+		ctx->burst.rx_ack += len - 1;
+		ctx->burst.r_count -= buf[1];
+		if (ctx->burst.r_count < 0)
+			ctx->burst.r_count = 0;
+
+		if (len < 3 || !buf[2])
+			continue;
+
+		len = buf[2];
+		d = sii8620_burst_get_rx_buf(ctx, len);
+		if (!d)
+			continue;
+		sii8620_read_buf(ctx, REG_EMSC_RCV_READ_PORT, d, len);
+		count -= len;
+		ctx->burst.rx_ack += len;
+	}
+}
+
+static void sii8620_burst_tx_rbuf_info(struct sii8620 *ctx, int size)
+{
+	struct mhl_burst_blk_rcv_buffer_info *d =
+		sii8620_burst_get_tx_buf(ctx, sizeof(*d));
+	if (!d)
+		return;
+
+	d->id = cpu_to_be16(MHL_BURST_ID_BLK_RCV_BUFFER_INFO);
+	d->size = cpu_to_le16(size);
+}
+
+static u8 sii8620_checksum(void *ptr, int size)
+{
+	u8 *d = ptr, sum = 0;
+
+	while (size--)
+		sum += *d++;
+
+	return sum;
+}
+
+static void sii8620_mhl_burst_hdr_set(struct mhl3_burst_header *h,
+	enum mhl_burst_id id)
+{
+	h->id = cpu_to_be16(id);
+	h->total_entries = 1;
+	h->sequence_index = 1;
+}
+
+static void sii8620_burst_tx_bits_per_pixel_fmt(struct sii8620 *ctx, u8 fmt)
+{
+	struct mhl_burst_bits_per_pixel_fmt *d;
+	const int size = sizeof(*d) + sizeof(d->desc[0]);
+
+	d = sii8620_burst_get_tx_buf(ctx, size);
+	if (!d)
+		return;
+
+	sii8620_mhl_burst_hdr_set(&d->hdr, MHL_BURST_ID_BITS_PER_PIXEL_FMT);
+	d->num_entries = 1;
+	d->desc[0].stream_id = 0;
+	d->desc[0].pixel_format = fmt;
+	d->hdr.checksum -= sii8620_checksum(d, size);
+}
+
+static void sii8620_burst_rx_all(struct sii8620 *ctx)
+{
+	u8 *d = ctx->burst.rx_buf;
+	int count = ctx->burst.rx_count;
+
+	while (count-- > 0) {
+		int len = *d++;
+		int id = get_unaligned_be16(&d[0]);
+
+		switch (id) {
+		case MHL_BURST_ID_BLK_RCV_BUFFER_INFO:
+			ctx->burst.r_size = get_unaligned_le16(&d[2]);
+			break;
+		default:
+			break;
+		}
+		count -= len;
+		d += len;
+	}
+	ctx->burst.rx_count = 0;
+}
+
+static void sii8620_fetch_edid(struct sii8620 *ctx)
+{
+	u8 lm_ddc, ddc_cmd, int3, cbus;
+	unsigned long timeout;
+	int fetched, i;
+	int edid_len = EDID_LENGTH;
+	u8 *edid;
+
+	sii8620_readb(ctx, REG_CBUS_STATUS);
+	lm_ddc = sii8620_readb(ctx, REG_LM_DDC);
+	ddc_cmd = sii8620_readb(ctx, REG_DDC_CMD);
+
+	sii8620_write_seq(ctx,
+		REG_INTR9_MASK, 0,
+		REG_EDID_CTRL, BIT_EDID_CTRL_EDID_FIFO_ADDR_AUTO,
+		REG_HDCP2X_POLL_CS, 0x71,
+		REG_HDCP2X_CTRL_0, BIT_HDCP2X_CTRL_0_HDCP2X_HDCPTX,
+		REG_LM_DDC, lm_ddc | BIT_LM_DDC_SW_TPI_EN_DISABLED,
+	);
+
+	for (i = 0; i < 256; ++i) {
+		u8 ddc_stat = sii8620_readb(ctx, REG_DDC_STATUS);
+
+		if (!(ddc_stat & BIT_DDC_STATUS_DDC_I2C_IN_PROG))
+			break;
+		sii8620_write(ctx, REG_DDC_STATUS,
+			      BIT_DDC_STATUS_DDC_FIFO_EMPTY);
+	}
+
+	sii8620_write(ctx, REG_DDC_ADDR, 0x50 << 1);
+
+	edid = kmalloc(EDID_LENGTH, GFP_KERNEL);
+	if (!edid) {
+		ctx->error = -ENOMEM;
+		return;
+	}
+
+#define FETCH_SIZE 16
+	for (fetched = 0; fetched < edid_len; fetched += FETCH_SIZE) {
+		sii8620_readb(ctx, REG_DDC_STATUS);
+		sii8620_write_seq(ctx,
+			REG_DDC_CMD, ddc_cmd | VAL_DDC_CMD_DDC_CMD_ABORT,
+			REG_DDC_CMD, ddc_cmd | VAL_DDC_CMD_DDC_CMD_CLEAR_FIFO,
+			REG_DDC_STATUS, BIT_DDC_STATUS_DDC_FIFO_EMPTY
+		);
+		sii8620_write_seq(ctx,
+			REG_DDC_SEGM, fetched >> 8,
+			REG_DDC_OFFSET, fetched & 0xff,
+			REG_DDC_DIN_CNT1, FETCH_SIZE,
+			REG_DDC_DIN_CNT2, 0,
+			REG_DDC_CMD, ddc_cmd | VAL_DDC_CMD_ENH_DDC_READ_NO_ACK
+		);
+
+		int3 = 0;
+		timeout = jiffies + msecs_to_jiffies(200);
+		for (;;) {
+			cbus = sii8620_readb(ctx, REG_CBUS_STATUS);
+			if (~cbus & BIT_CBUS_STATUS_CBUS_CONNECTED) {
+				kfree(edid);
+				edid = NULL;
+				goto end;
+			}
+			if (int3 & BIT_DDC_CMD_DONE) {
+				if (sii8620_readb(ctx, REG_DDC_DOUT_CNT)
+				    >= FETCH_SIZE)
+					break;
+			} else {
+				int3 = sii8620_readb(ctx, REG_INTR3);
+			}
+			if (time_is_before_jiffies(timeout)) {
+				ctx->error = -ETIMEDOUT;
+				dev_err(ctx->dev, "timeout during EDID read\n");
+				kfree(edid);
+				edid = NULL;
+				goto end;
+			}
+			usleep_range(10, 20);
+		}
+
+		sii8620_read_buf(ctx, REG_DDC_DATA, edid + fetched, FETCH_SIZE);
+		if (fetched + FETCH_SIZE == EDID_LENGTH) {
+			u8 ext = ((struct edid *)edid)->extensions;
+
+			if (ext) {
+				u8 *new_edid;
+
+				edid_len += ext * EDID_LENGTH;
+				new_edid = krealloc(edid, edid_len, GFP_KERNEL);
+				if (!new_edid) {
+					kfree(edid);
+					ctx->error = -ENOMEM;
+					return;
+				}
+				edid = new_edid;
+			}
+		}
+	}
+
+	sii8620_write_seq(ctx,
+		REG_INTR3_MASK, BIT_DDC_CMD_DONE,
+		REG_LM_DDC, lm_ddc
+	);
+
+end:
+	kfree(ctx->edid);
+	ctx->edid = (struct edid *)edid;
+}
+
+static void sii8620_set_upstream_edid(struct sii8620 *ctx)
+{
+	sii8620_setbits(ctx, REG_DPD, BIT_DPD_PDNRX12 | BIT_DPD_PDIDCK_N
+			| BIT_DPD_PD_MHL_CLK_N, 0xff);
+
+	sii8620_write_seq_static(ctx,
+		REG_RX_HDMI_CTRL3, 0x00,
+		REG_PKT_FILTER_0, 0xFF,
+		REG_PKT_FILTER_1, 0xFF,
+		REG_ALICE0_BW_I2C, 0x06
+	);
+
+	sii8620_setbits(ctx, REG_RX_HDMI_CLR_BUFFER,
+			BIT_RX_HDMI_CLR_BUFFER_VSI_CLR_EN, 0xff);
+
+	sii8620_write_seq_static(ctx,
+		REG_EDID_CTRL, BIT_EDID_CTRL_EDID_FIFO_ADDR_AUTO
+			| BIT_EDID_CTRL_EDID_MODE_EN,
+		REG_EDID_FIFO_ADDR, 0,
+	);
+
+	sii8620_write_buf(ctx, REG_EDID_FIFO_WR_DATA, (u8 *)ctx->edid,
+			  (ctx->edid->extensions + 1) * EDID_LENGTH);
+
+	sii8620_write_seq_static(ctx,
+		REG_EDID_CTRL, BIT_EDID_CTRL_EDID_PRIME_VALID
+			| BIT_EDID_CTRL_EDID_FIFO_ADDR_AUTO
+			| BIT_EDID_CTRL_EDID_MODE_EN,
+		REG_INTR5_MASK, BIT_INTR_SCDT_CHANGE,
+		REG_INTR9_MASK, 0
+	);
+}
+
+static void sii8620_xtal_set_rate(struct sii8620 *ctx)
+{
+	static const struct {
+		unsigned int rate;
+		u8 div;
+		u8 tp1;
+	} rates[] = {
+		{ 19200, 0x04, 0x53 },
+		{ 20000, 0x04, 0x62 },
+		{ 24000, 0x05, 0x75 },
+		{ 30000, 0x06, 0x92 },
+		{ 38400, 0x0c, 0xbc },
+	};
+	unsigned long rate = clk_get_rate(ctx->clk_xtal) / 1000;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(rates) - 1; ++i)
+		if (rate <= rates[i].rate)
+			break;
+
+	if (rate != rates[i].rate)
+		dev_err(ctx->dev, "xtal clock rate(%lukHz) not supported, setting MHL for %ukHz.\n",
+			rate, rates[i].rate);
+
+	sii8620_write(ctx, REG_DIV_CTL_MAIN, rates[i].div);
+	sii8620_write(ctx, REG_HDCP2X_TP1, rates[i].tp1);
+}
+
+static int sii8620_hw_on(struct sii8620 *ctx)
+{
+	int ret;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+	if (ret)
+		return ret;
+
+	usleep_range(10000, 20000);
+	ret = clk_prepare_enable(ctx->clk_xtal);
+	if (ret)
+		return ret;
+
+	msleep(100);
+	gpiod_set_value(ctx->gpio_reset, 0);
+	msleep(100);
+
+	return 0;
+}
+
+static int sii8620_hw_off(struct sii8620 *ctx)
+{
+	clk_disable_unprepare(ctx->clk_xtal);
+	gpiod_set_value(ctx->gpio_reset, 1);
+	return regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+}
+
+static void sii8620_cbus_reset(struct sii8620 *ctx)
+{
+	sii8620_write(ctx, REG_PWD_SRST, BIT_PWD_SRST_CBUS_RST
+		      | BIT_PWD_SRST_CBUS_RST_SW_EN);
+	usleep_range(10000, 20000);
+	sii8620_write(ctx, REG_PWD_SRST, BIT_PWD_SRST_CBUS_RST_SW_EN);
+}
+
+static void sii8620_set_auto_zone(struct sii8620 *ctx)
+{
+	if (ctx->mode != CM_MHL1) {
+		sii8620_write_seq_static(ctx,
+			REG_TX_ZONE_CTL1, 0x0,
+			REG_MHL_PLL_CTL0, VAL_MHL_PLL_CTL0_HDMI_CLK_RATIO_1X
+				| BIT_MHL_PLL_CTL0_CRYSTAL_CLK_SEL
+				| BIT_MHL_PLL_CTL0_ZONE_MASK_OE
+		);
+	} else {
+		sii8620_write_seq_static(ctx,
+			REG_TX_ZONE_CTL1, VAL_TX_ZONE_CTL1_TX_ZONE_CTRL_MODE,
+			REG_MHL_PLL_CTL0, VAL_MHL_PLL_CTL0_HDMI_CLK_RATIO_1X
+				| BIT_MHL_PLL_CTL0_ZONE_MASK_OE
+		);
+	}
+}
+
+static void sii8620_stop_video(struct sii8620 *ctx)
+{
+	u8 uninitialized_var(val);
+
+	sii8620_write_seq_static(ctx,
+		REG_TPI_INTR_EN, 0,
+		REG_HDCP2X_INTR0_MASK, 0,
+		REG_TPI_COPP_DATA2, 0,
+		REG_TPI_INTR_ST0, ~0,
+	);
+
+	switch (ctx->sink_type) {
+	case SINK_DVI:
+		val = BIT_TPI_SC_REG_TMDS_OE_POWER_DOWN
+			| BIT_TPI_SC_TPI_AV_MUTE;
+		break;
+	case SINK_HDMI:
+	default:
+		val = BIT_TPI_SC_REG_TMDS_OE_POWER_DOWN
+			| BIT_TPI_SC_TPI_AV_MUTE
+			| BIT_TPI_SC_TPI_OUTPUT_MODE_0_HDMI;
+		break;
+	}
+
+	sii8620_write(ctx, REG_TPI_SC, val);
+}
+
+static void sii8620_set_format(struct sii8620 *ctx)
+{
+	u8 out_fmt;
+
+	if (sii8620_is_mhl3(ctx)) {
+		sii8620_setbits(ctx, REG_M3_P0CTRL,
+				BIT_M3_P0CTRL_MHL3_P0_PIXEL_MODE_PACKED,
+				ctx->use_packed_pixel ? ~0 : 0);
+	} else {
+		if (ctx->use_packed_pixel) {
+			sii8620_write_seq_static(ctx,
+				REG_VID_MODE, BIT_VID_MODE_M1080P,
+				REG_MHL_TOP_CTL, BIT_MHL_TOP_CTL_MHL_PP_SEL | 1,
+				REG_MHLTX_CTL6, 0x60
+			);
+		} else {
+			sii8620_write_seq_static(ctx,
+				REG_VID_MODE, 0,
+				REG_MHL_TOP_CTL, 1,
+				REG_MHLTX_CTL6, 0xa0
+			);
+		}
+	}
+
+	if (ctx->use_packed_pixel)
+		out_fmt = VAL_TPI_FORMAT(YCBCR422, FULL);
+	else
+		out_fmt = VAL_TPI_FORMAT(RGB, FULL);
+
+	sii8620_write_seq(ctx,
+		REG_TPI_INPUT, VAL_TPI_FORMAT(RGB, FULL),
+		REG_TPI_OUTPUT, out_fmt,
+	);
+}
+
+static int mhl3_infoframe_init(struct mhl3_infoframe *frame)
+{
+	memset(frame, 0, sizeof(*frame));
+
+	frame->version = 3;
+	frame->hev_format = -1;
+	return 0;
+}
+
+static ssize_t mhl3_infoframe_pack(struct mhl3_infoframe *frame,
+		 void *buffer, size_t size)
+{
+	const int frm_len = HDMI_INFOFRAME_HEADER_SIZE + MHL3_INFOFRAME_SIZE;
+	u8 *ptr = buffer;
+
+	if (size < frm_len)
+		return -ENOSPC;
+
+	memset(buffer, 0, size);
+	ptr[0] = HDMI_INFOFRAME_TYPE_VENDOR;
+	ptr[1] = frame->version;
+	ptr[2] = MHL3_INFOFRAME_SIZE;
+	ptr[4] = MHL3_IEEE_OUI & 0xff;
+	ptr[5] = (MHL3_IEEE_OUI >> 8) & 0xff;
+	ptr[6] = (MHL3_IEEE_OUI >> 16) & 0xff;
+	ptr[7] = frame->video_format & 0x3;
+	ptr[7] |= (frame->format_type & 0x7) << 2;
+	ptr[7] |= frame->sep_audio ? BIT(5) : 0;
+	if (frame->hev_format >= 0) {
+		ptr[9] = 1;
+		ptr[10] = (frame->hev_format >> 8) & 0xff;
+		ptr[11] = frame->hev_format & 0xff;
+	}
+	if (frame->av_delay) {
+		bool sign = frame->av_delay < 0;
+		int delay = sign ? -frame->av_delay : frame->av_delay;
+
+		ptr[12] = (delay >> 16) & 0xf;
+		if (sign)
+			ptr[12] |= BIT(4);
+		ptr[13] = (delay >> 8) & 0xff;
+		ptr[14] = delay & 0xff;
+	}
+	ptr[3] -= sii8620_checksum(buffer, frm_len);
+	return frm_len;
+}
+
+static void sii8620_set_infoframes(struct sii8620 *ctx,
+				   struct drm_display_mode *mode)
+{
+	struct mhl3_infoframe mhl_frm;
+	union hdmi_infoframe frm;
+	u8 buf[31];
+	int ret;
+
+	ret = drm_hdmi_avi_infoframe_from_display_mode(&frm.avi,
+						       mode,
+						       true);
+	if (ctx->use_packed_pixel)
+		frm.avi.colorspace = HDMI_COLORSPACE_YUV422;
+
+	if (!ret)
+		ret = hdmi_avi_infoframe_pack(&frm.avi, buf, ARRAY_SIZE(buf));
+	if (ret > 0)
+		sii8620_write_buf(ctx, REG_TPI_AVI_CHSUM, buf + 3, ret - 3);
+
+	if (!sii8620_is_mhl3(ctx) || !ctx->use_packed_pixel) {
+		sii8620_write(ctx, REG_TPI_SC,
+			BIT_TPI_SC_TPI_OUTPUT_MODE_0_HDMI);
+		sii8620_write(ctx, REG_PKT_FILTER_0,
+			BIT_PKT_FILTER_0_DROP_CEA_GAMUT_PKT |
+			BIT_PKT_FILTER_0_DROP_MPEG_PKT |
+			BIT_PKT_FILTER_0_DROP_GCP_PKT,
+			BIT_PKT_FILTER_1_DROP_GEN_PKT);
+		return;
+	}
+
+	sii8620_write(ctx, REG_PKT_FILTER_0,
+		BIT_PKT_FILTER_0_DROP_CEA_GAMUT_PKT |
+		BIT_PKT_FILTER_0_DROP_MPEG_PKT |
+		BIT_PKT_FILTER_0_DROP_AVI_PKT |
+		BIT_PKT_FILTER_0_DROP_GCP_PKT,
+		BIT_PKT_FILTER_1_VSI_OVERRIDE_DIS |
+		BIT_PKT_FILTER_1_DROP_GEN_PKT |
+		BIT_PKT_FILTER_1_DROP_VSIF_PKT);
+
+	sii8620_write(ctx, REG_TPI_INFO_FSEL, BIT_TPI_INFO_FSEL_EN
+		| BIT_TPI_INFO_FSEL_RPT | VAL_TPI_INFO_FSEL_VSI);
+	ret = mhl3_infoframe_init(&mhl_frm);
+	if (!ret)
+		ret = mhl3_infoframe_pack(&mhl_frm, buf, ARRAY_SIZE(buf));
+	sii8620_write_buf(ctx, REG_TPI_INFO_B0, buf, ret);
+}
+
+static void sii8620_start_video(struct sii8620 *ctx)
+{
+	struct drm_display_mode *mode =
+		&ctx->bridge.encoder->crtc->state->adjusted_mode;
+
+	if (!sii8620_is_mhl3(ctx))
+		sii8620_stop_video(ctx);
+
+	if (ctx->sink_type == SINK_DVI && !sii8620_is_mhl3(ctx)) {
+		sii8620_write(ctx, REG_RX_HDMI_CTRL2,
+			      VAL_RX_HDMI_CTRL2_DEFVAL);
+		sii8620_write(ctx, REG_TPI_SC, 0);
+		return;
+	}
+
+	sii8620_write_seq_static(ctx,
+		REG_RX_HDMI_CTRL2, VAL_RX_HDMI_CTRL2_DEFVAL
+			| BIT_RX_HDMI_CTRL2_USE_AV_MUTE,
+		REG_VID_OVRRD, BIT_VID_OVRRD_PP_AUTO_DISABLE
+			| BIT_VID_OVRRD_M1080P_OVRRD);
+	sii8620_set_format(ctx);
+
+	if (!sii8620_is_mhl3(ctx)) {
+		u8 link_mode = MHL_DST_LM_PATH_ENABLED;
+
+		if (ctx->use_packed_pixel)
+			link_mode |= MHL_DST_LM_CLK_MODE_PACKED_PIXEL;
+		else
+			link_mode |= MHL_DST_LM_CLK_MODE_NORMAL;
+
+		sii8620_mt_write_stat(ctx, MHL_DST_REG(LINK_MODE), link_mode);
+		sii8620_set_auto_zone(ctx);
+	} else {
+		static const struct {
+			int max_clk;
+			u8 zone;
+			u8 link_rate;
+			u8 rrp_decode;
+		} clk_spec[] = {
+			{ 150000, VAL_TX_ZONE_CTL3_TX_ZONE_1_5GBPS,
+			  MHL_XDS_LINK_RATE_1_5_GBPS, 0x38 },
+			{ 300000, VAL_TX_ZONE_CTL3_TX_ZONE_3GBPS,
+			  MHL_XDS_LINK_RATE_3_0_GBPS, 0x40 },
+			{ 600000, VAL_TX_ZONE_CTL3_TX_ZONE_6GBPS,
+			  MHL_XDS_LINK_RATE_6_0_GBPS, 0x40 },
+		};
+		u8 p0_ctrl = BIT_M3_P0CTRL_MHL3_P0_PORT_EN;
+		int clk = mode->clock * (ctx->use_packed_pixel ? 2 : 3);
+		int i;
+
+		for (i = 0; i < ARRAY_SIZE(clk_spec) - 1; ++i)
+			if (clk < clk_spec[i].max_clk)
+				break;
+
+		if (100 * clk >= 98 * clk_spec[i].max_clk)
+			p0_ctrl |= BIT_M3_P0CTRL_MHL3_P0_UNLIMIT_EN;
+
+		sii8620_burst_tx_bits_per_pixel_fmt(ctx, ctx->use_packed_pixel);
+		sii8620_burst_send(ctx);
+		sii8620_write_seq(ctx,
+			REG_MHL_DP_CTL0, 0xf0,
+			REG_MHL3_TX_ZONE_CTL, clk_spec[i].zone);
+		sii8620_setbits(ctx, REG_M3_P0CTRL,
+			BIT_M3_P0CTRL_MHL3_P0_PORT_EN
+			| BIT_M3_P0CTRL_MHL3_P0_UNLIMIT_EN, p0_ctrl);
+		sii8620_setbits(ctx, REG_M3_POSTM, MSK_M3_POSTM_RRP_DECODE,
+			clk_spec[i].rrp_decode);
+		sii8620_write_seq_static(ctx,
+			REG_M3_CTRL, VAL_M3_CTRL_MHL3_VALUE
+				| BIT_M3_CTRL_H2M_SWRST,
+			REG_M3_CTRL, VAL_M3_CTRL_MHL3_VALUE
+		);
+		sii8620_mt_write_stat(ctx, MHL_XDS_REG(AVLINK_MODE_CONTROL),
+			clk_spec[i].link_rate);
+	}
+
+	sii8620_set_infoframes(ctx, mode);
+}
+
+static void sii8620_disable_hpd(struct sii8620 *ctx)
+{
+	sii8620_setbits(ctx, REG_EDID_CTRL, BIT_EDID_CTRL_EDID_PRIME_VALID, 0);
+	sii8620_write_seq_static(ctx,
+		REG_HPD_CTRL, BIT_HPD_CTRL_HPD_OUT_OVR_EN,
+		REG_INTR8_MASK, 0
+	);
+}
+
+static void sii8620_enable_hpd(struct sii8620 *ctx)
+{
+	sii8620_setbits(ctx, REG_TMDS_CSTAT_P3,
+			BIT_TMDS_CSTAT_P3_SCDT_CLR_AVI_DIS
+			| BIT_TMDS_CSTAT_P3_CLR_AVI, ~0);
+	sii8620_write_seq_static(ctx,
+		REG_HPD_CTRL, BIT_HPD_CTRL_HPD_OUT_OVR_EN
+			| BIT_HPD_CTRL_HPD_HIGH,
+	);
+}
+
+static void sii8620_mhl_discover(struct sii8620 *ctx)
+{
+	sii8620_write_seq_static(ctx,
+		REG_DISC_CTRL9, BIT_DISC_CTRL9_WAKE_DRVFLT
+			| BIT_DISC_CTRL9_DISC_PULSE_PROCEED,
+		REG_DISC_CTRL4, VAL_DISC_CTRL4(VAL_PUP_5K, VAL_PUP_20K),
+		REG_CBUS_DISC_INTR0_MASK, BIT_MHL3_EST_INT
+			| BIT_MHL_EST_INT
+			| BIT_NOT_MHL_EST_INT
+			| BIT_CBUS_MHL3_DISCON_INT
+			| BIT_CBUS_MHL12_DISCON_INT
+			| BIT_RGND_READY_INT,
+		REG_MHL_PLL_CTL0, VAL_MHL_PLL_CTL0_HDMI_CLK_RATIO_1X
+			| BIT_MHL_PLL_CTL0_CRYSTAL_CLK_SEL
+			| BIT_MHL_PLL_CTL0_ZONE_MASK_OE,
+		REG_MHL_DP_CTL0, BIT_MHL_DP_CTL0_DP_OE
+			| BIT_MHL_DP_CTL0_TX_OE_OVR,
+		REG_M3_CTRL, VAL_M3_CTRL_MHL3_VALUE,
+		REG_MHL_DP_CTL1, 0xA2,
+		REG_MHL_DP_CTL2, 0x03,
+		REG_MHL_DP_CTL3, 0x35,
+		REG_MHL_DP_CTL5, 0x02,
+		REG_MHL_DP_CTL6, 0x02,
+		REG_MHL_DP_CTL7, 0x03,
+		REG_COC_CTLC, 0xFF,
+		REG_DPD, BIT_DPD_PWRON_PLL | BIT_DPD_PDNTX12
+			| BIT_DPD_OSC_EN | BIT_DPD_PWRON_HSIC,
+		REG_COC_INTR_MASK, BIT_COC_PLL_LOCK_STATUS_CHANGE
+			| BIT_COC_CALIBRATION_DONE,
+		REG_CBUS_INT_1_MASK, BIT_CBUS_MSC_ABORT_RCVD
+			| BIT_CBUS_CMD_ABORT,
+		REG_CBUS_INT_0_MASK, BIT_CBUS_MSC_MT_DONE
+			| BIT_CBUS_HPD_CHG
+			| BIT_CBUS_MSC_MR_WRITE_STAT
+			| BIT_CBUS_MSC_MR_MSC_MSG
+			| BIT_CBUS_MSC_MR_WRITE_BURST
+			| BIT_CBUS_MSC_MR_SET_INT
+			| BIT_CBUS_MSC_MT_DONE_NACK
+	);
+}
+
+static void sii8620_peer_specific_init(struct sii8620 *ctx)
+{
+	if (sii8620_is_mhl3(ctx))
+		sii8620_write_seq_static(ctx,
+			REG_SYS_CTRL1, BIT_SYS_CTRL1_BLOCK_DDC_BY_HPD,
+			REG_EMSCINTRMASK1,
+				BIT_EMSCINTR1_EMSC_TRAINING_COMMA_ERR
+		);
+	else
+		sii8620_write_seq_static(ctx,
+			REG_HDCP2X_INTR0_MASK, 0x00,
+			REG_EMSCINTRMASK1, 0x00,
+			REG_HDCP2X_INTR0, 0xFF,
+			REG_INTR1, 0xFF,
+			REG_SYS_CTRL1, BIT_SYS_CTRL1_BLOCK_DDC_BY_HPD
+				| BIT_SYS_CTRL1_TX_CTRL_HDMI
+		);
+}
+
+#define SII8620_MHL_VERSION			0x32
+#define SII8620_SCRATCHPAD_SIZE			16
+#define SII8620_INT_STAT_SIZE			0x33
+
+static void sii8620_set_dev_cap(struct sii8620 *ctx)
+{
+	static const u8 devcap[MHL_DCAP_SIZE] = {
+		[MHL_DCAP_MHL_VERSION] = SII8620_MHL_VERSION,
+		[MHL_DCAP_CAT] = MHL_DCAP_CAT_SOURCE | MHL_DCAP_CAT_POWER,
+		[MHL_DCAP_ADOPTER_ID_H] = 0x01,
+		[MHL_DCAP_ADOPTER_ID_L] = 0x41,
+		[MHL_DCAP_VID_LINK_MODE] = MHL_DCAP_VID_LINK_RGB444
+			| MHL_DCAP_VID_LINK_PPIXEL
+			| MHL_DCAP_VID_LINK_16BPP,
+		[MHL_DCAP_AUD_LINK_MODE] = MHL_DCAP_AUD_LINK_2CH,
+		[MHL_DCAP_VIDEO_TYPE] = MHL_DCAP_VT_GRAPHICS,
+		[MHL_DCAP_LOG_DEV_MAP] = MHL_DCAP_LD_GUI,
+		[MHL_DCAP_BANDWIDTH] = 0x0f,
+		[MHL_DCAP_FEATURE_FLAG] = MHL_DCAP_FEATURE_RCP_SUPPORT
+			| MHL_DCAP_FEATURE_RAP_SUPPORT
+			| MHL_DCAP_FEATURE_SP_SUPPORT,
+		[MHL_DCAP_SCRATCHPAD_SIZE] = SII8620_SCRATCHPAD_SIZE,
+		[MHL_DCAP_INT_STAT_SIZE] = SII8620_INT_STAT_SIZE,
+	};
+	static const u8 xdcap[MHL_XDC_SIZE] = {
+		[MHL_XDC_ECBUS_SPEEDS] = MHL_XDC_ECBUS_S_075
+			| MHL_XDC_ECBUS_S_8BIT,
+		[MHL_XDC_TMDS_SPEEDS] = MHL_XDC_TMDS_150
+			| MHL_XDC_TMDS_300 | MHL_XDC_TMDS_600,
+		[MHL_XDC_ECBUS_ROLES] = MHL_XDC_DEV_HOST,
+		[MHL_XDC_LOG_DEV_MAPX] = MHL_XDC_LD_PHONE,
+	};
+
+	sii8620_write_buf(ctx, REG_MHL_DEVCAP_0, devcap, ARRAY_SIZE(devcap));
+	sii8620_write_buf(ctx, REG_MHL_EXTDEVCAP_0, xdcap, ARRAY_SIZE(xdcap));
+}
+
+static void sii8620_mhl_init(struct sii8620 *ctx)
+{
+	sii8620_write_seq_static(ctx,
+		REG_DISC_CTRL4, VAL_DISC_CTRL4(VAL_PUP_OFF, VAL_PUP_20K),
+		REG_CBUS_MSC_COMPAT_CTRL,
+			BIT_CBUS_MSC_COMPAT_CTRL_XDEVCAP_EN,
+	);
+
+	sii8620_peer_specific_init(ctx);
+
+	sii8620_disable_hpd(ctx);
+
+	sii8620_write_seq_static(ctx,
+		REG_EDID_CTRL, BIT_EDID_CTRL_EDID_FIFO_ADDR_AUTO,
+		REG_DISC_CTRL9, BIT_DISC_CTRL9_WAKE_DRVFLT
+			| BIT_DISC_CTRL9_WAKE_PULSE_BYPASS,
+		REG_TMDS0_CCTRL1, 0x90,
+		REG_TMDS_CLK_EN, 0x01,
+		REG_TMDS_CH_EN, 0x11,
+		REG_BGR_BIAS, 0x87,
+		REG_ALICE0_ZONE_CTRL, 0xE8,
+		REG_ALICE0_MODE_CTRL, 0x04,
+	);
+	sii8620_setbits(ctx, REG_LM_DDC, BIT_LM_DDC_SW_TPI_EN_DISABLED, 0);
+	sii8620_write_seq_static(ctx,
+		REG_TPI_HW_OPT3, 0x76,
+		REG_TMDS_CCTRL, BIT_TMDS_CCTRL_TMDS_OE,
+		REG_TPI_DTD_B2, 79,
+	);
+	sii8620_set_dev_cap(ctx);
+	sii8620_write_seq_static(ctx,
+		REG_MDT_XMIT_TIMEOUT, 100,
+		REG_MDT_XMIT_CTRL, 0x03,
+		REG_MDT_XFIFO_STAT, 0x00,
+		REG_MDT_RCV_TIMEOUT, 100,
+		REG_CBUS_LINK_CTRL_8, 0x1D,
+	);
+
+	sii8620_start_gen2_write_burst(ctx);
+	sii8620_write_seq_static(ctx,
+		REG_BIST_CTRL, 0x00,
+		REG_COC_CTL1, 0x10,
+		REG_COC_CTL2, 0x18,
+		REG_COC_CTLF, 0x07,
+		REG_COC_CTL11, 0xF8,
+		REG_COC_CTL17, 0x61,
+		REG_COC_CTL18, 0x46,
+		REG_COC_CTL19, 0x15,
+		REG_COC_CTL1A, 0x01,
+		REG_MHL_COC_CTL3, BIT_MHL_COC_CTL3_COC_AECHO_EN,
+		REG_MHL_COC_CTL4, 0x2D,
+		REG_MHL_COC_CTL5, 0xF9,
+		REG_MSC_HEARTBEAT_CTRL, 0x27,
+	);
+	sii8620_disable_gen2_write_burst(ctx);
+
+	sii8620_mt_write_stat(ctx, MHL_DST_REG(VERSION), SII8620_MHL_VERSION);
+	sii8620_mt_write_stat(ctx, MHL_DST_REG(CONNECTED_RDY),
+			      MHL_DST_CONN_DCAP_RDY | MHL_DST_CONN_XDEVCAPP_SUPP
+			      | MHL_DST_CONN_POW_STAT);
+	sii8620_mt_set_int(ctx, MHL_INT_REG(RCHANGE), MHL_INT_RC_DCAP_CHG);
+}
+
+static void sii8620_emsc_enable(struct sii8620 *ctx)
+{
+	u8 reg;
+
+	sii8620_setbits(ctx, REG_GENCTL, BIT_GENCTL_EMSC_EN
+					 | BIT_GENCTL_CLR_EMSC_RFIFO
+					 | BIT_GENCTL_CLR_EMSC_XFIFO, ~0);
+	sii8620_setbits(ctx, REG_GENCTL, BIT_GENCTL_CLR_EMSC_RFIFO
+					 | BIT_GENCTL_CLR_EMSC_XFIFO, 0);
+	sii8620_setbits(ctx, REG_COMMECNT, BIT_COMMECNT_I2C_TO_EMSC_EN, ~0);
+	reg = sii8620_readb(ctx, REG_EMSCINTR);
+	sii8620_write(ctx, REG_EMSCINTR, reg);
+	sii8620_write(ctx, REG_EMSCINTRMASK, BIT_EMSCINTR_SPI_DVLD);
+}
+
+static int sii8620_wait_for_fsm_state(struct sii8620 *ctx, u8 state)
+{
+	int i;
+
+	for (i = 0; i < 10; ++i) {
+		u8 s = sii8620_readb(ctx, REG_COC_STAT_0);
+
+		if ((s & MSK_COC_STAT_0_FSM_STATE) == state)
+			return 0;
+		if (!(s & BIT_COC_STAT_0_PLL_LOCKED))
+			return -EBUSY;
+		usleep_range(4000, 6000);
+	}
+	return -ETIMEDOUT;
+}
+
+static void sii8620_set_mode(struct sii8620 *ctx, enum sii8620_mode mode)
+{
+	int ret;
+
+	if (ctx->mode == mode)
+		return;
+
+	switch (mode) {
+	case CM_MHL1:
+		sii8620_write_seq_static(ctx,
+			REG_CBUS_MSC_COMPAT_CTRL, 0x02,
+			REG_M3_CTRL, VAL_M3_CTRL_MHL1_2_VALUE,
+			REG_DPD, BIT_DPD_PWRON_PLL | BIT_DPD_PDNTX12
+				| BIT_DPD_OSC_EN,
+			REG_COC_INTR_MASK, 0
+		);
+		ctx->mode = mode;
+		break;
+	case CM_MHL3:
+		sii8620_write(ctx, REG_M3_CTRL, VAL_M3_CTRL_MHL3_VALUE);
+		ctx->mode = mode;
+		return;
+	case CM_ECBUS_S:
+		sii8620_emsc_enable(ctx);
+		sii8620_write_seq_static(ctx,
+			REG_TTXSPINUMS, 4,
+			REG_TRXSPINUMS, 4,
+			REG_TTXHSICNUMS, 0x14,
+			REG_TRXHSICNUMS, 0x14,
+			REG_TTXTOTNUMS, 0x18,
+			REG_TRXTOTNUMS, 0x18,
+			REG_PWD_SRST, BIT_PWD_SRST_COC_DOC_RST
+				      | BIT_PWD_SRST_CBUS_RST_SW_EN,
+			REG_MHL_COC_CTL1, 0xbd,
+			REG_PWD_SRST, BIT_PWD_SRST_CBUS_RST_SW_EN,
+			REG_COC_CTLB, 0x01,
+			REG_COC_CTL0, 0x5c,
+			REG_COC_CTL14, 0x03,
+			REG_COC_CTL15, 0x80,
+			REG_MHL_DP_CTL6, BIT_MHL_DP_CTL6_DP_TAP1_SGN
+					 | BIT_MHL_DP_CTL6_DP_TAP1_EN
+					 | BIT_MHL_DP_CTL6_DT_PREDRV_FEEDCAP_EN,
+			REG_MHL_DP_CTL8, 0x03
+		);
+		ret = sii8620_wait_for_fsm_state(ctx, 0x03);
+		sii8620_write_seq_static(ctx,
+			REG_COC_CTL14, 0x00,
+			REG_COC_CTL15, 0x80
+		);
+		if (!ret)
+			sii8620_write(ctx, REG_CBUS3_CNVT, 0x85);
+		else
+			sii8620_disconnect(ctx);
+		return;
+	case CM_DISCONNECTED:
+		ctx->mode = mode;
+		break;
+	default:
+		dev_err(ctx->dev, "%s mode %d not supported\n", __func__, mode);
+		break;
+	}
+
+	sii8620_set_auto_zone(ctx);
+
+	if (mode != CM_MHL1)
+		return;
+
+	sii8620_write_seq_static(ctx,
+		REG_MHL_DP_CTL0, 0xBC,
+		REG_MHL_DP_CTL1, 0xBB,
+		REG_MHL_DP_CTL3, 0x48,
+		REG_MHL_DP_CTL5, 0x39,
+		REG_MHL_DP_CTL2, 0x2A,
+		REG_MHL_DP_CTL6, 0x2A,
+		REG_MHL_DP_CTL7, 0x08
+	);
+}
+
+static void sii8620_hpd_unplugged(struct sii8620 *ctx)
+{
+	sii8620_disable_hpd(ctx);
+	ctx->sink_type = SINK_NONE;
+	ctx->sink_detected = false;
+	ctx->feature_complete = false;
+	kfree(ctx->edid);
+	ctx->edid = NULL;
+}
+
+static void sii8620_disconnect(struct sii8620 *ctx)
+{
+	sii8620_disable_gen2_write_burst(ctx);
+	sii8620_stop_video(ctx);
+	msleep(100);
+	sii8620_cbus_reset(ctx);
+	sii8620_set_mode(ctx, CM_DISCONNECTED);
+	sii8620_write_seq_static(ctx,
+		REG_TX_ZONE_CTL1, 0,
+		REG_MHL_PLL_CTL0, 0x07,
+		REG_COC_CTL0, 0x40,
+		REG_CBUS3_CNVT, 0x84,
+		REG_COC_CTL14, 0x00,
+		REG_COC_CTL0, 0x40,
+		REG_HRXCTRL3, 0x07,
+		REG_MHL_PLL_CTL0, VAL_MHL_PLL_CTL0_HDMI_CLK_RATIO_1X
+			| BIT_MHL_PLL_CTL0_CRYSTAL_CLK_SEL
+			| BIT_MHL_PLL_CTL0_ZONE_MASK_OE,
+		REG_MHL_DP_CTL0, BIT_MHL_DP_CTL0_DP_OE
+			| BIT_MHL_DP_CTL0_TX_OE_OVR,
+		REG_MHL_DP_CTL1, 0xBB,
+		REG_MHL_DP_CTL3, 0x48,
+		REG_MHL_DP_CTL5, 0x3F,
+		REG_MHL_DP_CTL2, 0x2F,
+		REG_MHL_DP_CTL6, 0x2A,
+		REG_MHL_DP_CTL7, 0x03
+	);
+	sii8620_hpd_unplugged(ctx);
+	sii8620_write_seq_static(ctx,
+		REG_M3_CTRL, VAL_M3_CTRL_MHL3_VALUE,
+		REG_MHL_COC_CTL1, 0x07,
+		REG_DISC_CTRL4, VAL_DISC_CTRL4(VAL_PUP_OFF, VAL_PUP_20K),
+		REG_DISC_CTRL8, 0x00,
+		REG_DISC_CTRL9, BIT_DISC_CTRL9_WAKE_DRVFLT
+			| BIT_DISC_CTRL9_WAKE_PULSE_BYPASS,
+		REG_INT_CTRL, 0x00,
+		REG_MSC_HEARTBEAT_CTRL, 0x27,
+		REG_DISC_CTRL1, 0x25,
+		REG_CBUS_DISC_INTR0, (u8)~BIT_RGND_READY_INT,
+		REG_CBUS_DISC_INTR0_MASK, BIT_RGND_READY_INT,
+		REG_MDT_INT_1, 0xff,
+		REG_MDT_INT_1_MASK, 0x00,
+		REG_MDT_INT_0, 0xff,
+		REG_MDT_INT_0_MASK, 0x00,
+		REG_COC_INTR, 0xff,
+		REG_COC_INTR_MASK, 0x00,
+		REG_TRXINTH, 0xff,
+		REG_TRXINTMH, 0x00,
+		REG_CBUS_INT_0, 0xff,
+		REG_CBUS_INT_0_MASK, 0x00,
+		REG_CBUS_INT_1, 0xff,
+		REG_CBUS_INT_1_MASK, 0x00,
+		REG_EMSCINTR, 0xff,
+		REG_EMSCINTRMASK, 0x00,
+		REG_EMSCINTR1, 0xff,
+		REG_EMSCINTRMASK1, 0x00,
+		REG_INTR8, 0xff,
+		REG_INTR8_MASK, 0x00,
+		REG_TPI_INTR_ST0, 0xff,
+		REG_TPI_INTR_EN, 0x00,
+		REG_HDCP2X_INTR0, 0xff,
+		REG_HDCP2X_INTR0_MASK, 0x00,
+		REG_INTR9, 0xff,
+		REG_INTR9_MASK, 0x00,
+		REG_INTR3, 0xff,
+		REG_INTR3_MASK, 0x00,
+		REG_INTR5, 0xff,
+		REG_INTR5_MASK, 0x00,
+		REG_INTR2, 0xff,
+		REG_INTR2_MASK, 0x00,
+	);
+	memset(ctx->stat, 0, sizeof(ctx->stat));
+	memset(ctx->xstat, 0, sizeof(ctx->xstat));
+	memset(ctx->devcap, 0, sizeof(ctx->devcap));
+	memset(ctx->xdevcap, 0, sizeof(ctx->xdevcap));
+	ctx->devcap_read = false;
+	ctx->cbus_status = 0;
+	sii8620_mt_cleanup(ctx);
+}
+
+static void sii8620_mhl_disconnected(struct sii8620 *ctx)
+{
+	sii8620_write_seq_static(ctx,
+		REG_DISC_CTRL4, VAL_DISC_CTRL4(VAL_PUP_OFF, VAL_PUP_20K),
+		REG_CBUS_MSC_COMPAT_CTRL,
+			BIT_CBUS_MSC_COMPAT_CTRL_XDEVCAP_EN
+	);
+	sii8620_disconnect(ctx);
+}
+
+static void sii8620_irq_disc(struct sii8620 *ctx)
+{
+	u8 stat = sii8620_readb(ctx, REG_CBUS_DISC_INTR0);
+
+	if (stat & VAL_CBUS_MHL_DISCON)
+		sii8620_mhl_disconnected(ctx);
+
+	if (stat & BIT_RGND_READY_INT) {
+		u8 stat2 = sii8620_readb(ctx, REG_DISC_STAT2);
+
+		if ((stat2 & MSK_DISC_STAT2_RGND) == VAL_RGND_1K) {
+			sii8620_mhl_discover(ctx);
+		} else {
+			sii8620_write_seq_static(ctx,
+				REG_DISC_CTRL9, BIT_DISC_CTRL9_WAKE_DRVFLT
+					| BIT_DISC_CTRL9_NOMHL_EST
+					| BIT_DISC_CTRL9_WAKE_PULSE_BYPASS,
+				REG_CBUS_DISC_INTR0_MASK, BIT_RGND_READY_INT
+					| BIT_CBUS_MHL3_DISCON_INT
+					| BIT_CBUS_MHL12_DISCON_INT
+					| BIT_NOT_MHL_EST_INT
+			);
+		}
+	}
+	if (stat & BIT_MHL_EST_INT)
+		sii8620_mhl_init(ctx);
+
+	sii8620_write(ctx, REG_CBUS_DISC_INTR0, stat);
+}
+
+static void sii8620_read_burst(struct sii8620 *ctx)
+{
+	u8 buf[17];
+
+	sii8620_read_buf(ctx, REG_MDT_RCV_READ_PORT, buf, ARRAY_SIZE(buf));
+	sii8620_write(ctx, REG_MDT_RCV_CTRL, BIT_MDT_RCV_CTRL_MDT_RCV_EN |
+		      BIT_MDT_RCV_CTRL_MDT_DELAY_RCV_EN |
+		      BIT_MDT_RCV_CTRL_MDT_RFIFO_CLR_CUR);
+	sii8620_readb(ctx, REG_MDT_RFIFO_STAT);
+}
+
+static void sii8620_irq_g2wb(struct sii8620 *ctx)
+{
+	u8 stat = sii8620_readb(ctx, REG_MDT_INT_0);
+
+	if (stat & BIT_MDT_IDLE_AFTER_HAWB_DISABLE)
+		if (sii8620_is_mhl3(ctx))
+			sii8620_mt_set_int(ctx, MHL_INT_REG(RCHANGE),
+				MHL_INT_RC_FEAT_COMPLETE);
+
+	if (stat & BIT_MDT_RFIFO_DATA_RDY)
+		sii8620_read_burst(ctx);
+
+	if (stat & BIT_MDT_XFIFO_EMPTY)
+		sii8620_write(ctx, REG_MDT_XMIT_CTRL, 0);
+
+	sii8620_write(ctx, REG_MDT_INT_0, stat);
+}
+
+static void sii8620_status_dcap_ready(struct sii8620 *ctx)
+{
+	enum sii8620_mode mode;
+
+	mode = ctx->stat[MHL_DST_VERSION] >= 0x30 ? CM_MHL3 : CM_MHL1;
+	if (mode > ctx->mode)
+		sii8620_set_mode(ctx, mode);
+	sii8620_peer_specific_init(ctx);
+	sii8620_write(ctx, REG_INTR9_MASK, BIT_INTR9_DEVCAP_DONE
+		      | BIT_INTR9_EDID_DONE | BIT_INTR9_EDID_ERROR);
+}
+
+static void sii8620_status_changed_path(struct sii8620 *ctx)
+{
+	u8 link_mode;
+
+	if (ctx->use_packed_pixel)
+		link_mode = MHL_DST_LM_CLK_MODE_PACKED_PIXEL;
+	else
+		link_mode = MHL_DST_LM_CLK_MODE_NORMAL;
+
+	if (ctx->stat[MHL_DST_LINK_MODE] & MHL_DST_LM_PATH_ENABLED)
+		link_mode |= MHL_DST_LM_PATH_ENABLED;
+
+	sii8620_mt_write_stat(ctx, MHL_DST_REG(LINK_MODE),
+			      link_mode);
+}
+
+static void sii8620_msc_mr_write_stat(struct sii8620 *ctx)
+{
+	u8 st[MHL_DST_SIZE], xst[MHL_XDS_SIZE];
+
+	sii8620_read_buf(ctx, REG_MHL_STAT_0, st, MHL_DST_SIZE);
+	sii8620_read_buf(ctx, REG_MHL_EXTSTAT_0, xst, MHL_XDS_SIZE);
+
+	sii8620_update_array(ctx->stat, st, MHL_DST_SIZE);
+	sii8620_update_array(ctx->xstat, xst, MHL_XDS_SIZE);
+
+	if (ctx->stat[MHL_DST_CONNECTED_RDY] & st[MHL_DST_CONNECTED_RDY] &
+	    MHL_DST_CONN_DCAP_RDY) {
+		sii8620_status_dcap_ready(ctx);
+
+		if (!sii8620_is_mhl3(ctx))
+			sii8620_mt_read_devcap(ctx, false);
+	}
+
+	if (st[MHL_DST_LINK_MODE] & MHL_DST_LM_PATH_ENABLED)
+		sii8620_status_changed_path(ctx);
+}
+
+static void sii8620_ecbus_up(struct sii8620 *ctx, int ret)
+{
+	if (ret < 0)
+		return;
+
+	sii8620_set_mode(ctx, CM_ECBUS_S);
+}
+
+static void sii8620_got_ecbus_speed(struct sii8620 *ctx, int ret)
+{
+	if (ret < 0)
+		return;
+
+	sii8620_mt_write_stat(ctx, MHL_XDS_REG(CURR_ECBUS_MODE),
+			      MHL_XDS_ECBUS_S | MHL_XDS_SLOT_MODE_8BIT);
+	sii8620_mt_rap(ctx, MHL_RAP_CBUS_MODE_UP);
+	sii8620_mt_set_cont(ctx, sii8620_ecbus_up);
+}
+
+static void sii8620_mhl_burst_emsc_support_set(struct mhl_burst_emsc_support *d,
+	enum mhl_burst_id id)
+{
+	sii8620_mhl_burst_hdr_set(&d->hdr, MHL_BURST_ID_EMSC_SUPPORT);
+	d->num_entries = 1;
+	d->burst_id[0] = cpu_to_be16(id);
+}
+
+static void sii8620_send_features(struct sii8620 *ctx)
+{
+	u8 buf[16];
+
+	sii8620_write(ctx, REG_MDT_XMIT_CTRL, BIT_MDT_XMIT_CTRL_EN
+		| BIT_MDT_XMIT_CTRL_FIXED_BURST_LEN);
+	sii8620_mhl_burst_emsc_support_set((void *)buf,
+		MHL_BURST_ID_HID_PAYLOAD);
+	sii8620_write_buf(ctx, REG_MDT_XMIT_WRITE_PORT, buf, ARRAY_SIZE(buf));
+}
+
+static bool sii8620_rcp_consume(struct sii8620 *ctx, u8 scancode)
+{
+	bool pressed = !(scancode & MHL_RCP_KEY_RELEASED_MASK);
+
+	scancode &= MHL_RCP_KEY_ID_MASK;
+
+	if (!ctx->rc_dev) {
+		dev_dbg(ctx->dev, "RCP input device not initialized\n");
+		return false;
+	}
+
+	if (pressed)
+		rc_keydown(ctx->rc_dev, RC_PROTO_CEC, scancode, 0);
+	else
+		rc_keyup(ctx->rc_dev);
+
+	return true;
+}
+
+static void sii8620_msc_mr_set_int(struct sii8620 *ctx)
+{
+	u8 ints[MHL_INT_SIZE];
+
+	sii8620_read_buf(ctx, REG_MHL_INT_0, ints, MHL_INT_SIZE);
+	sii8620_write_buf(ctx, REG_MHL_INT_0, ints, MHL_INT_SIZE);
+
+	if (ints[MHL_INT_RCHANGE] & MHL_INT_RC_DCAP_CHG) {
+		switch (ctx->mode) {
+		case CM_MHL3:
+			sii8620_mt_read_xdevcap_reg(ctx, MHL_XDC_ECBUS_SPEEDS);
+			sii8620_mt_set_cont(ctx, sii8620_got_ecbus_speed);
+			break;
+		case CM_ECBUS_S:
+			sii8620_mt_read_devcap(ctx, true);
+			break;
+		default:
+			break;
+		}
+	}
+	if (ints[MHL_INT_RCHANGE] & MHL_INT_RC_FEAT_REQ)
+		sii8620_send_features(ctx);
+	if (ints[MHL_INT_RCHANGE] & MHL_INT_RC_FEAT_COMPLETE) {
+		ctx->feature_complete = true;
+		if (ctx->edid)
+			sii8620_enable_hpd(ctx);
+	}
+}
+
+static struct sii8620_mt_msg *sii8620_msc_msg_first(struct sii8620 *ctx)
+{
+	struct device *dev = ctx->dev;
+
+	if (list_empty(&ctx->mt_queue)) {
+		dev_err(dev, "unexpected MSC MT response\n");
+		return NULL;
+	}
+
+	return list_first_entry(&ctx->mt_queue, struct sii8620_mt_msg, node);
+}
+
+static void sii8620_msc_mt_done(struct sii8620 *ctx)
+{
+	struct sii8620_mt_msg *msg = sii8620_msc_msg_first(ctx);
+
+	if (!msg)
+		return;
+
+	msg->ret = sii8620_readb(ctx, REG_MSC_MT_RCVD_DATA0);
+	ctx->mt_state = MT_STATE_DONE;
+}
+
+static void sii8620_msc_mr_msc_msg(struct sii8620 *ctx)
+{
+	struct sii8620_mt_msg *msg;
+	u8 buf[2];
+
+	sii8620_read_buf(ctx, REG_MSC_MR_MSC_MSG_RCVD_1ST_DATA, buf, 2);
+
+	switch (buf[0]) {
+	case MHL_MSC_MSG_RAPK:
+		msg = sii8620_msc_msg_first(ctx);
+		if (!msg)
+			return;
+		msg->ret = buf[1];
+		ctx->mt_state = MT_STATE_DONE;
+		break;
+	case MHL_MSC_MSG_RCP:
+		if (!sii8620_rcp_consume(ctx, buf[1]))
+			sii8620_mt_rcpe(ctx,
+					MHL_RCPE_STATUS_INEFFECTIVE_KEY_CODE);
+		sii8620_mt_rcpk(ctx, buf[1]);
+		break;
+	default:
+		dev_err(ctx->dev, "%s message type %d,%d not supported",
+			__func__, buf[0], buf[1]);
+	}
+}
+
+static void sii8620_irq_msc(struct sii8620 *ctx)
+{
+	u8 stat = sii8620_readb(ctx, REG_CBUS_INT_0);
+
+	if (stat & ~BIT_CBUS_HPD_CHG)
+		sii8620_write(ctx, REG_CBUS_INT_0, stat & ~BIT_CBUS_HPD_CHG);
+
+	if (stat & BIT_CBUS_HPD_CHG) {
+		u8 cbus_stat = sii8620_readb(ctx, REG_CBUS_STATUS);
+
+		if ((cbus_stat ^ ctx->cbus_status) & BIT_CBUS_STATUS_CBUS_HPD) {
+			sii8620_write(ctx, REG_CBUS_INT_0, BIT_CBUS_HPD_CHG);
+		} else {
+			stat ^= BIT_CBUS_STATUS_CBUS_HPD;
+			cbus_stat ^= BIT_CBUS_STATUS_CBUS_HPD;
+		}
+		ctx->cbus_status = cbus_stat;
+	}
+
+	if (stat & BIT_CBUS_MSC_MR_WRITE_STAT)
+		sii8620_msc_mr_write_stat(ctx);
+
+	if (stat & BIT_CBUS_HPD_CHG) {
+		if (ctx->cbus_status & BIT_CBUS_STATUS_CBUS_HPD) {
+			ctx->sink_detected = true;
+			sii8620_identify_sink(ctx);
+		} else {
+			sii8620_hpd_unplugged(ctx);
+		}
+	}
+
+	if (stat & BIT_CBUS_MSC_MR_SET_INT)
+		sii8620_msc_mr_set_int(ctx);
+
+	if (stat & BIT_CBUS_MSC_MT_DONE)
+		sii8620_msc_mt_done(ctx);
+
+	if (stat & BIT_CBUS_MSC_MR_MSC_MSG)
+		sii8620_msc_mr_msc_msg(ctx);
+}
+
+static void sii8620_irq_coc(struct sii8620 *ctx)
+{
+	u8 stat = sii8620_readb(ctx, REG_COC_INTR);
+
+	if (stat & BIT_COC_CALIBRATION_DONE) {
+		u8 cstat = sii8620_readb(ctx, REG_COC_STAT_0);
+
+		cstat &= BIT_COC_STAT_0_PLL_LOCKED | MSK_COC_STAT_0_FSM_STATE;
+		if (cstat == (BIT_COC_STAT_0_PLL_LOCKED | 0x02)) {
+			sii8620_write_seq_static(ctx,
+				REG_COC_CTLB, 0,
+				REG_TRXINTMH, BIT_TDM_INTR_SYNC_DATA
+					      | BIT_TDM_INTR_SYNC_WAIT
+			);
+		}
+	}
+
+	sii8620_write(ctx, REG_COC_INTR, stat);
+}
+
+static void sii8620_irq_merr(struct sii8620 *ctx)
+{
+	u8 stat = sii8620_readb(ctx, REG_CBUS_INT_1);
+
+	sii8620_write(ctx, REG_CBUS_INT_1, stat);
+}
+
+static void sii8620_irq_edid(struct sii8620 *ctx)
+{
+	u8 stat = sii8620_readb(ctx, REG_INTR9);
+
+	sii8620_write(ctx, REG_INTR9, stat);
+
+	if (stat & BIT_INTR9_DEVCAP_DONE)
+		ctx->mt_state = MT_STATE_DONE;
+}
+
+static void sii8620_irq_scdt(struct sii8620 *ctx)
+{
+	u8 stat = sii8620_readb(ctx, REG_INTR5);
+
+	if (stat & BIT_INTR_SCDT_CHANGE) {
+		u8 cstat = sii8620_readb(ctx, REG_TMDS_CSTAT_P3);
+
+		if (cstat & BIT_TMDS_CSTAT_P3_SCDT)
+			sii8620_start_video(ctx);
+	}
+
+	sii8620_write(ctx, REG_INTR5, stat);
+}
+
+static void sii8620_got_xdevcap(struct sii8620 *ctx, int ret)
+{
+	if (ret < 0)
+		return;
+
+	sii8620_mt_read_devcap(ctx, false);
+}
+
+static void sii8620_irq_tdm(struct sii8620 *ctx)
+{
+	u8 stat = sii8620_readb(ctx, REG_TRXINTH);
+	u8 tdm = sii8620_readb(ctx, REG_TRXSTA2);
+
+	if ((tdm & MSK_TDM_SYNCHRONIZED) == VAL_TDM_SYNCHRONIZED) {
+		ctx->mode = CM_ECBUS_S;
+		ctx->burst.rx_ack = 0;
+		ctx->burst.r_size = SII8620_BURST_BUF_LEN;
+		sii8620_burst_tx_rbuf_info(ctx, SII8620_BURST_BUF_LEN);
+		sii8620_mt_read_devcap(ctx, true);
+		sii8620_mt_set_cont(ctx, sii8620_got_xdevcap);
+	} else {
+		sii8620_write_seq_static(ctx,
+			REG_MHL_PLL_CTL2, 0,
+			REG_MHL_PLL_CTL2, BIT_MHL_PLL_CTL2_CLKDETECT_EN
+		);
+	}
+
+	sii8620_write(ctx, REG_TRXINTH, stat);
+}
+
+static void sii8620_irq_block(struct sii8620 *ctx)
+{
+	u8 stat = sii8620_readb(ctx, REG_EMSCINTR);
+
+	if (stat & BIT_EMSCINTR_SPI_DVLD) {
+		u8 bstat = sii8620_readb(ctx, REG_SPIBURSTSTAT);
+
+		if (bstat & BIT_SPIBURSTSTAT_EMSC_NORMAL_MODE)
+			sii8620_burst_receive(ctx);
+	}
+
+	sii8620_write(ctx, REG_EMSCINTR, stat);
+}
+
+static void sii8620_irq_ddc(struct sii8620 *ctx)
+{
+	u8 stat = sii8620_readb(ctx, REG_INTR3);
+
+	if (stat & BIT_DDC_CMD_DONE) {
+		sii8620_write(ctx, REG_INTR3_MASK, 0);
+		if (sii8620_is_mhl3(ctx) && !ctx->feature_complete)
+			sii8620_mt_set_int(ctx, MHL_INT_REG(RCHANGE),
+					   MHL_INT_RC_FEAT_REQ);
+		else
+			sii8620_enable_hpd(ctx);
+	}
+	sii8620_write(ctx, REG_INTR3, stat);
+}
+
+/* endian agnostic, non-volatile version of test_bit */
+static bool sii8620_test_bit(unsigned int nr, const u8 *addr)
+{
+	return 1 & (addr[nr / BITS_PER_BYTE] >> (nr % BITS_PER_BYTE));
+}
+
+static irqreturn_t sii8620_irq_thread(int irq, void *data)
+{
+	static const struct {
+		int bit;
+		void (*handler)(struct sii8620 *ctx);
+	} irq_vec[] = {
+		{ BIT_FAST_INTR_STAT_DISC, sii8620_irq_disc },
+		{ BIT_FAST_INTR_STAT_G2WB, sii8620_irq_g2wb },
+		{ BIT_FAST_INTR_STAT_COC, sii8620_irq_coc },
+		{ BIT_FAST_INTR_STAT_TDM, sii8620_irq_tdm },
+		{ BIT_FAST_INTR_STAT_MSC, sii8620_irq_msc },
+		{ BIT_FAST_INTR_STAT_MERR, sii8620_irq_merr },
+		{ BIT_FAST_INTR_STAT_BLOCK, sii8620_irq_block },
+		{ BIT_FAST_INTR_STAT_EDID, sii8620_irq_edid },
+		{ BIT_FAST_INTR_STAT_DDC, sii8620_irq_ddc },
+		{ BIT_FAST_INTR_STAT_SCDT, sii8620_irq_scdt },
+	};
+	struct sii8620 *ctx = data;
+	u8 stats[LEN_FAST_INTR_STAT];
+	int i, ret;
+
+	mutex_lock(&ctx->lock);
+
+	sii8620_read_buf(ctx, REG_FAST_INTR_STAT, stats, ARRAY_SIZE(stats));
+	for (i = 0; i < ARRAY_SIZE(irq_vec); ++i)
+		if (sii8620_test_bit(irq_vec[i].bit, stats))
+			irq_vec[i].handler(ctx);
+
+	sii8620_burst_rx_all(ctx);
+	sii8620_mt_work(ctx);
+	sii8620_burst_send(ctx);
+
+	ret = sii8620_clear_error(ctx);
+	if (ret) {
+		dev_err(ctx->dev, "Error during IRQ handling, %d.\n", ret);
+		sii8620_mhl_disconnected(ctx);
+	}
+	mutex_unlock(&ctx->lock);
+
+	return IRQ_HANDLED;
+}
+
+static void sii8620_cable_in(struct sii8620 *ctx)
+{
+	struct device *dev = ctx->dev;
+	u8 ver[5];
+	int ret;
+
+	ret = sii8620_hw_on(ctx);
+	if (ret) {
+		dev_err(dev, "Error powering on, %d.\n", ret);
+		return;
+	}
+
+	sii8620_read_buf(ctx, REG_VND_IDL, ver, ARRAY_SIZE(ver));
+	ret = sii8620_clear_error(ctx);
+	if (ret) {
+		dev_err(dev, "Error accessing I2C bus, %d.\n", ret);
+		return;
+	}
+
+	dev_info(dev, "ChipID %02x%02x:%02x%02x rev %02x.\n", ver[1], ver[0],
+		 ver[3], ver[2], ver[4]);
+
+	sii8620_write(ctx, REG_DPD,
+		      BIT_DPD_PWRON_PLL | BIT_DPD_PDNTX12 | BIT_DPD_OSC_EN);
+
+	sii8620_xtal_set_rate(ctx);
+	sii8620_disconnect(ctx);
+
+	sii8620_write_seq_static(ctx,
+		REG_MHL_CBUS_CTL0, VAL_MHL_CBUS_CTL0_CBUS_DRV_SEL_STRONG
+			| VAL_MHL_CBUS_CTL0_CBUS_RGND_VBIAS_734,
+		REG_MHL_CBUS_CTL1, VAL_MHL_CBUS_CTL1_1115_OHM,
+		REG_DPD, BIT_DPD_PWRON_PLL | BIT_DPD_PDNTX12 | BIT_DPD_OSC_EN,
+	);
+
+	ret = sii8620_clear_error(ctx);
+	if (ret) {
+		dev_err(dev, "Error accessing I2C bus, %d.\n", ret);
+		return;
+	}
+
+	enable_irq(to_i2c_client(ctx->dev)->irq);
+}
+
+static void sii8620_init_rcp_input_dev(struct sii8620 *ctx)
+{
+	struct rc_dev *rc_dev;
+	int ret;
+
+	rc_dev = rc_allocate_device(RC_DRIVER_SCANCODE);
+	if (!rc_dev) {
+		dev_err(ctx->dev, "Failed to allocate RC device\n");
+		ctx->error = -ENOMEM;
+		return;
+	}
+
+	rc_dev->input_phys = "sii8620/input0";
+	rc_dev->input_id.bustype = BUS_VIRTUAL;
+	rc_dev->map_name = RC_MAP_CEC;
+	rc_dev->allowed_protocols = RC_PROTO_BIT_CEC;
+	rc_dev->driver_name = "sii8620";
+	rc_dev->device_name = "sii8620";
+
+	ret = rc_register_device(rc_dev);
+
+	if (ret) {
+		dev_err(ctx->dev, "Failed to register RC device\n");
+		ctx->error = ret;
+		rc_free_device(rc_dev);
+		return;
+	}
+	ctx->rc_dev = rc_dev;
+}
+
+static void sii8620_cable_out(struct sii8620 *ctx)
+{
+	disable_irq(to_i2c_client(ctx->dev)->irq);
+	sii8620_hw_off(ctx);
+}
+
+static void sii8620_extcon_work(struct work_struct *work)
+{
+	struct sii8620 *ctx =
+		container_of(work, struct sii8620, extcon_wq);
+	int state = extcon_get_state(ctx->extcon, EXTCON_DISP_MHL);
+
+	if (state == ctx->cable_state)
+		return;
+
+	ctx->cable_state = state;
+
+	if (state > 0)
+		sii8620_cable_in(ctx);
+	else
+		sii8620_cable_out(ctx);
+}
+
+static int sii8620_extcon_notifier(struct notifier_block *self,
+			unsigned long event, void *ptr)
+{
+	struct sii8620 *ctx =
+		container_of(self, struct sii8620, extcon_nb);
+
+	schedule_work(&ctx->extcon_wq);
+
+	return NOTIFY_DONE;
+}
+
+static int sii8620_extcon_init(struct sii8620 *ctx)
+{
+	struct extcon_dev *edev;
+	struct device_node *musb, *muic;
+	int ret;
+
+	/* get micro-USB connector node */
+	musb = of_graph_get_remote_node(ctx->dev->of_node, 1, -1);
+	/* next get micro-USB Interface Controller node */
+	muic = of_get_next_parent(musb);
+
+	if (!muic) {
+		dev_info(ctx->dev, "no extcon found, switching to 'always on' mode\n");
+		return 0;
+	}
+
+	edev = extcon_find_edev_by_node(muic);
+	of_node_put(muic);
+	if (IS_ERR(edev)) {
+		if (PTR_ERR(edev) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+		dev_err(ctx->dev, "Invalid or missing extcon\n");
+		return PTR_ERR(edev);
+	}
+
+	ctx->extcon = edev;
+	ctx->extcon_nb.notifier_call = sii8620_extcon_notifier;
+	INIT_WORK(&ctx->extcon_wq, sii8620_extcon_work);
+	ret = extcon_register_notifier(edev, EXTCON_DISP_MHL, &ctx->extcon_nb);
+	if (ret) {
+		dev_err(ctx->dev, "failed to register notifier for MHL\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static inline struct sii8620 *bridge_to_sii8620(struct drm_bridge *bridge)
+{
+	return container_of(bridge, struct sii8620, bridge);
+}
+
+static int sii8620_attach(struct drm_bridge *bridge)
+{
+	struct sii8620 *ctx = bridge_to_sii8620(bridge);
+
+	sii8620_init_rcp_input_dev(ctx);
+
+	return sii8620_clear_error(ctx);
+}
+
+static void sii8620_detach(struct drm_bridge *bridge)
+{
+	struct sii8620 *ctx = bridge_to_sii8620(bridge);
+
+	rc_unregister_device(ctx->rc_dev);
+}
+
+static int sii8620_is_packing_required(struct sii8620 *ctx,
+				       const struct drm_display_mode *mode)
+{
+	int max_pclk, max_pclk_pp_mode;
+
+	if (sii8620_is_mhl3(ctx)) {
+		max_pclk = MHL3_MAX_PCLK;
+		max_pclk_pp_mode = MHL3_MAX_PCLK_PP_MODE;
+	} else {
+		max_pclk = MHL1_MAX_PCLK;
+		max_pclk_pp_mode = MHL1_MAX_PCLK_PP_MODE;
+	}
+
+	if (mode->clock < max_pclk)
+		return 0;
+	else if (mode->clock < max_pclk_pp_mode)
+		return 1;
+	else
+		return -1;
+}
+
+static enum drm_mode_status sii8620_mode_valid(struct drm_bridge *bridge,
+					 const struct drm_display_mode *mode)
+{
+	struct sii8620 *ctx = bridge_to_sii8620(bridge);
+	int pack_required = sii8620_is_packing_required(ctx, mode);
+	bool can_pack = ctx->devcap[MHL_DCAP_VID_LINK_MODE] &
+			MHL_DCAP_VID_LINK_PPIXEL;
+
+	switch (pack_required) {
+	case 0:
+		return MODE_OK;
+	case 1:
+		return (can_pack) ? MODE_OK : MODE_CLOCK_HIGH;
+	default:
+		return MODE_CLOCK_HIGH;
+	}
+}
+
+static bool sii8620_mode_fixup(struct drm_bridge *bridge,
+			       const struct drm_display_mode *mode,
+			       struct drm_display_mode *adjusted_mode)
+{
+	struct sii8620 *ctx = bridge_to_sii8620(bridge);
+
+	mutex_lock(&ctx->lock);
+
+	ctx->use_packed_pixel = sii8620_is_packing_required(ctx, adjusted_mode);
+
+	mutex_unlock(&ctx->lock);
+
+	return true;
+}
+
+static const struct drm_bridge_funcs sii8620_bridge_funcs = {
+	.attach = sii8620_attach,
+	.detach = sii8620_detach,
+	.mode_fixup = sii8620_mode_fixup,
+	.mode_valid = sii8620_mode_valid,
+};
+
+static int sii8620_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct sii8620 *ctx;
+	int ret;
+
+	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	ctx->dev = dev;
+	mutex_init(&ctx->lock);
+	INIT_LIST_HEAD(&ctx->mt_queue);
+
+	ctx->clk_xtal = devm_clk_get(dev, "xtal");
+	if (IS_ERR(ctx->clk_xtal)) {
+		dev_err(dev, "failed to get xtal clock from DT\n");
+		return PTR_ERR(ctx->clk_xtal);
+	}
+
+	if (!client->irq) {
+		dev_err(dev, "no irq provided\n");
+		return -EINVAL;
+	}
+	irq_set_status_flags(client->irq, IRQ_NOAUTOEN);
+	ret = devm_request_threaded_irq(dev, client->irq, NULL,
+					sii8620_irq_thread,
+					IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+					"sii8620", ctx);
+	if (ret < 0) {
+		dev_err(dev, "failed to install IRQ handler\n");
+		return ret;
+	}
+
+	ctx->gpio_reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(ctx->gpio_reset)) {
+		dev_err(dev, "failed to get reset gpio from DT\n");
+		return PTR_ERR(ctx->gpio_reset);
+	}
+
+	ctx->supplies[0].supply = "cvcc10";
+	ctx->supplies[1].supply = "iovcc18";
+	ret = devm_regulator_bulk_get(dev, 2, ctx->supplies);
+	if (ret)
+		return ret;
+
+	ret = sii8620_extcon_init(ctx);
+	if (ret < 0) {
+		dev_err(ctx->dev, "failed to initialize EXTCON\n");
+		return ret;
+	}
+
+	i2c_set_clientdata(client, ctx);
+
+	ctx->bridge.funcs = &sii8620_bridge_funcs;
+	ctx->bridge.of_node = dev->of_node;
+	drm_bridge_add(&ctx->bridge);
+
+	if (!ctx->extcon)
+		sii8620_cable_in(ctx);
+
+	return 0;
+}
+
+static int sii8620_remove(struct i2c_client *client)
+{
+	struct sii8620 *ctx = i2c_get_clientdata(client);
+
+	if (ctx->extcon) {
+		extcon_unregister_notifier(ctx->extcon, EXTCON_DISP_MHL,
+					   &ctx->extcon_nb);
+		flush_work(&ctx->extcon_wq);
+		if (ctx->cable_state > 0)
+			sii8620_cable_out(ctx);
+	} else {
+		sii8620_cable_out(ctx);
+	}
+	drm_bridge_remove(&ctx->bridge);
+
+	return 0;
+}
+
+static const struct of_device_id sii8620_dt_match[] = {
+	{ .compatible = "sil,sii8620" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, sii8620_dt_match);
+
+static const struct i2c_device_id sii8620_id[] = {
+	{ "sii8620", 0 },
+	{ },
+};
+
+MODULE_DEVICE_TABLE(i2c, sii8620_id);
+static struct i2c_driver sii8620_driver = {
+	.driver = {
+		.name	= "sii8620",
+		.of_match_table = of_match_ptr(sii8620_dt_match),
+	},
+	.probe		= sii8620_probe,
+	.remove		= sii8620_remove,
+	.id_table = sii8620_id,
+};
+
+module_i2c_driver(sii8620_driver);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpu/drm/bridge/sil-sii8620.h b/drivers/gpu/drm/bridge/sil-sii8620.h
new file mode 100644
index 000000000..51ab540cf
--- /dev/null
+++ b/drivers/gpu/drm/bridge/sil-sii8620.h
@@ -0,0 +1,1535 @@
+/*
+ * Registers of Silicon Image SiI8620 Mobile HD Transmitter
+ *
+ * Copyright (C) 2015, Samsung Electronics Co., Ltd.
+ * Andrzej Hajda <a.hajda@samsung.com>
+ *
+ * Based on MHL driver for Android devices.
+ * Copyright (C) 2013-2014 Silicon Image, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __SIL_SII8620_H__
+#define __SIL_SII8620_H__
+
+/* Vendor ID Low byte, default value: 0x01 */
+#define REG_VND_IDL				0x0000
+
+/* Vendor ID High byte, default value: 0x00 */
+#define REG_VND_IDH				0x0001
+
+/* Device ID Low byte, default value: 0x60 */
+#define REG_DEV_IDL				0x0002
+
+/* Device ID High byte, default value: 0x86 */
+#define REG_DEV_IDH				0x0003
+
+/* Device Revision, default value: 0x10 */
+#define REG_DEV_REV				0x0004
+
+/* OTP DBYTE510, default value: 0x00 */
+#define REG_OTP_DBYTE510			0x0006
+
+/* System Control #1, default value: 0x00 */
+#define REG_SYS_CTRL1				0x0008
+#define BIT_SYS_CTRL1_OTPVMUTEOVR_SET		BIT(7)
+#define BIT_SYS_CTRL1_VSYNCPIN			BIT(6)
+#define BIT_SYS_CTRL1_OTPADROPOVR_SET		BIT(5)
+#define BIT_SYS_CTRL1_BLOCK_DDC_BY_HPD		BIT(4)
+#define BIT_SYS_CTRL1_OTP2XVOVR_EN		BIT(3)
+#define BIT_SYS_CTRL1_OTP2XAOVR_EN		BIT(2)
+#define BIT_SYS_CTRL1_TX_CTRL_HDMI		BIT(1)
+#define BIT_SYS_CTRL1_OTPAMUTEOVR_SET		BIT(0)
+
+/* System Control DPD, default value: 0x90 */
+#define REG_DPD					0x000b
+#define BIT_DPD_PWRON_PLL			BIT(7)
+#define BIT_DPD_PDNTX12				BIT(6)
+#define BIT_DPD_PDNRX12				BIT(5)
+#define BIT_DPD_OSC_EN				BIT(4)
+#define BIT_DPD_PWRON_HSIC			BIT(3)
+#define BIT_DPD_PDIDCK_N			BIT(2)
+#define BIT_DPD_PD_MHL_CLK_N			BIT(1)
+
+/* Dual link Control, default value: 0x00 */
+#define REG_DCTL				0x000d
+#define BIT_DCTL_TDM_LCLK_PHASE			BIT(7)
+#define BIT_DCTL_HSIC_CLK_PHASE			BIT(6)
+#define BIT_DCTL_CTS_TCK_PHASE			BIT(5)
+#define BIT_DCTL_EXT_DDC_SEL			BIT(4)
+#define BIT_DCTL_TRANSCODE			BIT(3)
+#define BIT_DCTL_HSIC_RX_STROBE_PHASE		BIT(2)
+#define BIT_DCTL_HSIC_TX_BIST_START_SEL		BIT(1)
+#define BIT_DCTL_TCLKNX_PHASE			BIT(0)
+
+/* PWD Software Reset, default value: 0x20 */
+#define REG_PWD_SRST				0x000e
+#define BIT_PWD_SRST_COC_DOC_RST		BIT(7)
+#define BIT_PWD_SRST_CBUS_RST_SW		BIT(6)
+#define BIT_PWD_SRST_CBUS_RST_SW_EN		BIT(5)
+#define BIT_PWD_SRST_MHLFIFO_RST		BIT(4)
+#define BIT_PWD_SRST_CBUS_RST			BIT(3)
+#define BIT_PWD_SRST_SW_RST_AUTO		BIT(2)
+#define BIT_PWD_SRST_HDCP2X_SW_RST		BIT(1)
+#define BIT_PWD_SRST_SW_RST			BIT(0)
+
+/* AKSV_1, default value: 0x00 */
+#define REG_AKSV_1				0x001d
+
+/* Video H Resolution #1, default value: 0x00 */
+#define REG_H_RESL				0x003a
+
+/* Video Mode, default value: 0x00 */
+#define REG_VID_MODE				0x004a
+#define BIT_VID_MODE_M1080P			BIT(6)
+
+/* Video Input Mode, default value: 0xc0 */
+#define REG_VID_OVRRD				0x0051
+#define BIT_VID_OVRRD_PP_AUTO_DISABLE		BIT(7)
+#define BIT_VID_OVRRD_M1080P_OVRRD		BIT(6)
+#define BIT_VID_OVRRD_MINIVSYNC_ON		BIT(5)
+#define BIT_VID_OVRRD_3DCONV_EN_FRAME_PACK	BIT(4)
+#define BIT_VID_OVRRD_ENABLE_AUTO_PATH_EN	BIT(3)
+#define BIT_VID_OVRRD_ENRGB2YCBCR_OVRRD		BIT(2)
+#define BIT_VID_OVRRD_ENDOWNSAMPLE_OVRRD	BIT(0)
+
+/* I2C Address reassignment, default value: 0x00 */
+#define REG_PAGE_MHLSPEC_ADDR			0x0057
+#define REG_PAGE7_ADDR				0x0058
+#define REG_PAGE8_ADDR				0x005c
+
+/* Fast Interrupt Status, default value: 0x00 */
+#define REG_FAST_INTR_STAT			0x005f
+#define LEN_FAST_INTR_STAT			7
+#define BIT_FAST_INTR_STAT_TIMR			8
+#define BIT_FAST_INTR_STAT_INT2			9
+#define BIT_FAST_INTR_STAT_DDC			10
+#define BIT_FAST_INTR_STAT_SCDT			11
+#define BIT_FAST_INTR_STAT_INFR			13
+#define BIT_FAST_INTR_STAT_EDID			14
+#define BIT_FAST_INTR_STAT_HDCP			15
+#define BIT_FAST_INTR_STAT_MSC			16
+#define BIT_FAST_INTR_STAT_MERR			17
+#define BIT_FAST_INTR_STAT_G2WB			18
+#define BIT_FAST_INTR_STAT_G2WB_ERR		19
+#define BIT_FAST_INTR_STAT_DISC			28
+#define BIT_FAST_INTR_STAT_BLOCK		30
+#define BIT_FAST_INTR_STAT_LTRN			31
+#define BIT_FAST_INTR_STAT_HDCP2		32
+#define BIT_FAST_INTR_STAT_TDM			42
+#define BIT_FAST_INTR_STAT_COC			51
+
+/* GPIO Control, default value: 0x15 */
+#define REG_GPIO_CTRL1				0x006e
+#define BIT_CTRL1_GPIO_I_8			BIT(5)
+#define BIT_CTRL1_GPIO_OEN_8			BIT(4)
+#define BIT_CTRL1_GPIO_I_7			BIT(3)
+#define BIT_CTRL1_GPIO_OEN_7			BIT(2)
+#define BIT_CTRL1_GPIO_I_6			BIT(1)
+#define BIT_CTRL1_GPIO_OEN_6			BIT(0)
+
+/* Interrupt Control, default value: 0x06 */
+#define REG_INT_CTRL				0x006f
+#define BIT_INT_CTRL_SOFTWARE_WP		BIT(7)
+#define BIT_INT_CTRL_INTR_OD			BIT(2)
+#define BIT_INT_CTRL_INTR_POLARITY		BIT(1)
+
+/* Interrupt State, default value: 0x00 */
+#define REG_INTR_STATE				0x0070
+#define BIT_INTR_STATE_INTR_STATE		BIT(0)
+
+/* Interrupt Source #1, default value: 0x00 */
+#define REG_INTR1				0x0071
+
+/* Interrupt Source #2, default value: 0x00 */
+#define REG_INTR2				0x0072
+
+/* Interrupt Source #3, default value: 0x01 */
+#define REG_INTR3				0x0073
+#define BIT_DDC_CMD_DONE			BIT(3)
+
+/* Interrupt Source #5, default value: 0x00 */
+#define REG_INTR5				0x0074
+
+/* Interrupt #1 Mask, default value: 0x00 */
+#define REG_INTR1_MASK				0x0075
+
+/* Interrupt #2 Mask, default value: 0x00 */
+#define REG_INTR2_MASK				0x0076
+
+/* Interrupt #3 Mask, default value: 0x00 */
+#define REG_INTR3_MASK				0x0077
+
+/* Interrupt #5 Mask, default value: 0x00 */
+#define REG_INTR5_MASK				0x0078
+#define BIT_INTR_SCDT_CHANGE			BIT(0)
+
+/* Hot Plug Connection Control, default value: 0x45 */
+#define REG_HPD_CTRL				0x0079
+#define BIT_HPD_CTRL_HPD_DS_SIGNAL		BIT(7)
+#define BIT_HPD_CTRL_HPD_OUT_OD_EN		BIT(6)
+#define BIT_HPD_CTRL_HPD_HIGH			BIT(5)
+#define BIT_HPD_CTRL_HPD_OUT_OVR_EN		BIT(4)
+#define BIT_HPD_CTRL_GPIO_I_1			BIT(3)
+#define BIT_HPD_CTRL_GPIO_OEN_1			BIT(2)
+#define BIT_HPD_CTRL_GPIO_I_0			BIT(1)
+#define BIT_HPD_CTRL_GPIO_OEN_0			BIT(0)
+
+/* GPIO Control, default value: 0x55 */
+#define REG_GPIO_CTRL				0x007a
+#define BIT_CTRL_GPIO_I_5			BIT(7)
+#define BIT_CTRL_GPIO_OEN_5			BIT(6)
+#define BIT_CTRL_GPIO_I_4			BIT(5)
+#define BIT_CTRL_GPIO_OEN_4			BIT(4)
+#define BIT_CTRL_GPIO_I_3			BIT(3)
+#define BIT_CTRL_GPIO_OEN_3			BIT(2)
+#define BIT_CTRL_GPIO_I_2			BIT(1)
+#define BIT_CTRL_GPIO_OEN_2			BIT(0)
+
+/* Interrupt Source 7, default value: 0x00 */
+#define REG_INTR7				0x007b
+
+/* Interrupt Source 8, default value: 0x00 */
+#define REG_INTR8				0x007c
+
+/* Interrupt #7 Mask, default value: 0x00 */
+#define REG_INTR7_MASK				0x007d
+
+/* Interrupt #8 Mask, default value: 0x00 */
+#define REG_INTR8_MASK				0x007e
+#define BIT_CEA_NEW_VSI				BIT(2)
+#define BIT_CEA_NEW_AVI				BIT(1)
+
+/* IEEE, default value: 0x10 */
+#define REG_TMDS_CCTRL				0x0080
+#define BIT_TMDS_CCTRL_TMDS_OE			BIT(4)
+
+/* TMDS Control #4, default value: 0x02 */
+#define REG_TMDS_CTRL4				0x0085
+#define BIT_TMDS_CTRL4_SCDT_CKDT_SEL		BIT(1)
+#define BIT_TMDS_CTRL4_TX_EN_BY_SCDT		BIT(0)
+
+/* BIST CNTL, default value: 0x00 */
+#define REG_BIST_CTRL				0x00bb
+#define BIT_RXBIST_VGB_EN			BIT(7)
+#define BIT_TXBIST_VGB_EN			BIT(6)
+#define BIT_BIST_START_SEL			BIT(5)
+#define BIT_BIST_START_BIT			BIT(4)
+#define BIT_BIST_ALWAYS_ON			BIT(3)
+#define BIT_BIST_TRANS				BIT(2)
+#define BIT_BIST_RESET				BIT(1)
+#define BIT_BIST_EN				BIT(0)
+
+/* BIST DURATION0, default value: 0x00 */
+#define REG_BIST_TEST_SEL			0x00bd
+#define MSK_BIST_TEST_SEL_BIST_PATT_SEL		0x0f
+
+/* BIST VIDEO_MODE, default value: 0x00 */
+#define REG_BIST_VIDEO_MODE			0x00be
+#define MSK_BIST_VIDEO_MODE_BIST_VIDEO_MODE_3_0	0x0f
+
+/* BIST DURATION0, default value: 0x00 */
+#define REG_BIST_DURATION_0			0x00bf
+
+/* BIST DURATION1, default value: 0x00 */
+#define REG_BIST_DURATION_1			0x00c0
+
+/* BIST DURATION2, default value: 0x00 */
+#define REG_BIST_DURATION_2			0x00c1
+
+/* BIST 8BIT_PATTERN, default value: 0x00 */
+#define REG_BIST_8BIT_PATTERN			0x00c2
+
+/* LM DDC, default value: 0x80 */
+#define REG_LM_DDC				0x00c7
+#define BIT_LM_DDC_SW_TPI_EN_DISABLED		BIT(7)
+
+#define BIT_LM_DDC_VIDEO_MUTE_EN		BIT(5)
+#define BIT_LM_DDC_DDC_TPI_SW			BIT(2)
+#define BIT_LM_DDC_DDC_GRANT			BIT(1)
+#define BIT_LM_DDC_DDC_GPU_REQUEST		BIT(0)
+
+/* DDC I2C Manual, default value: 0x03 */
+#define REG_DDC_MANUAL				0x00ec
+#define BIT_DDC_MANUAL_MAN_DDC			BIT(7)
+#define BIT_DDC_MANUAL_VP_SEL			BIT(6)
+#define BIT_DDC_MANUAL_DSDA			BIT(5)
+#define BIT_DDC_MANUAL_DSCL			BIT(4)
+#define BIT_DDC_MANUAL_GCP_HW_CTL_EN		BIT(3)
+#define BIT_DDC_MANUAL_DDCM_ABORT_WP		BIT(2)
+#define BIT_DDC_MANUAL_IO_DSDA			BIT(1)
+#define BIT_DDC_MANUAL_IO_DSCL			BIT(0)
+
+/* DDC I2C Target Slave Address, default value: 0x00 */
+#define REG_DDC_ADDR				0x00ed
+#define MSK_DDC_ADDR_DDC_ADDR			0xfe
+
+/* DDC I2C Target Segment Address, default value: 0x00 */
+#define REG_DDC_SEGM				0x00ee
+
+/* DDC I2C Target Offset Address, default value: 0x00 */
+#define REG_DDC_OFFSET				0x00ef
+
+/* DDC I2C Data In count #1, default value: 0x00 */
+#define REG_DDC_DIN_CNT1			0x00f0
+
+/* DDC I2C Data In count #2, default value: 0x00 */
+#define REG_DDC_DIN_CNT2			0x00f1
+#define MSK_DDC_DIN_CNT2_DDC_DIN_CNT_9_8	0x03
+
+/* DDC I2C Status, default value: 0x04 */
+#define REG_DDC_STATUS				0x00f2
+#define BIT_DDC_STATUS_DDC_BUS_LOW		BIT(6)
+#define BIT_DDC_STATUS_DDC_NO_ACK		BIT(5)
+#define BIT_DDC_STATUS_DDC_I2C_IN_PROG		BIT(4)
+#define BIT_DDC_STATUS_DDC_FIFO_FULL		BIT(3)
+#define BIT_DDC_STATUS_DDC_FIFO_EMPTY		BIT(2)
+#define BIT_DDC_STATUS_DDC_FIFO_READ_IN_SUE	BIT(1)
+#define BIT_DDC_STATUS_DDC_FIFO_WRITE_IN_USE	BIT(0)
+
+/* DDC I2C Command, default value: 0x70 */
+#define REG_DDC_CMD				0x00f3
+#define BIT_DDC_CMD_HDCP_DDC_EN			BIT(6)
+#define BIT_DDC_CMD_SDA_DEL_EN			BIT(5)
+#define BIT_DDC_CMD_DDC_FLT_EN			BIT(4)
+
+#define MSK_DDC_CMD_DDC_CMD			0x0f
+#define VAL_DDC_CMD_ENH_DDC_READ_NO_ACK		0x04
+#define VAL_DDC_CMD_DDC_CMD_CLEAR_FIFO		0x09
+#define VAL_DDC_CMD_DDC_CMD_ABORT		0x0f
+
+/* DDC I2C FIFO Data In/Out, default value: 0x00 */
+#define REG_DDC_DATA				0x00f4
+
+/* DDC I2C Data Out Counter, default value: 0x00 */
+#define REG_DDC_DOUT_CNT			0x00f5
+#define BIT_DDC_DOUT_CNT_DDC_DELAY_CNT_8	BIT(7)
+#define MSK_DDC_DOUT_CNT_DDC_DATA_OUT_CNT	0x1f
+
+/* DDC I2C Delay Count, default value: 0x14 */
+#define REG_DDC_DELAY_CNT			0x00f6
+
+/* Test Control, default value: 0x80 */
+#define REG_TEST_TXCTRL				0x00f7
+#define BIT_TEST_TXCTRL_RCLK_REF_SEL		BIT(7)
+#define BIT_TEST_TXCTRL_PCLK_REF_SEL		BIT(6)
+#define MSK_TEST_TXCTRL_BYPASS_PLL_CLK		0x3c
+#define BIT_TEST_TXCTRL_HDMI_MODE		BIT(1)
+#define BIT_TEST_TXCTRL_TST_PLLCK		BIT(0)
+
+/* CBUS Address, default value: 0x00 */
+#define REG_PAGE_CBUS_ADDR			0x00f8
+
+/* I2C Device Address re-assignment */
+#define REG_PAGE1_ADDR				0x00fc
+#define REG_PAGE2_ADDR				0x00fd
+#define REG_PAGE3_ADDR				0x00fe
+#define REG_HW_TPI_ADDR				0x00ff
+
+/* USBT CTRL0, default value: 0x00 */
+#define REG_UTSRST				0x0100
+#define BIT_UTSRST_FC_SRST			BIT(5)
+#define BIT_UTSRST_KEEPER_SRST			BIT(4)
+#define BIT_UTSRST_HTX_SRST			BIT(3)
+#define BIT_UTSRST_TRX_SRST			BIT(2)
+#define BIT_UTSRST_TTX_SRST			BIT(1)
+#define BIT_UTSRST_HRX_SRST			BIT(0)
+
+/* HSIC RX Control3, default value: 0x07 */
+#define REG_HRXCTRL3				0x0104
+#define MSK_HRXCTRL3_HRX_AFFCTRL		0xf0
+#define BIT_HRXCTRL3_HRX_OUT_EN			BIT(2)
+#define BIT_HRXCTRL3_STATUS_EN			BIT(1)
+#define BIT_HRXCTRL3_HRX_STAY_RESET		BIT(0)
+
+/* HSIC RX INT Registers */
+#define REG_HRXINTL				0x0111
+#define REG_HRXINTH				0x0112
+
+/* TDM TX NUMBITS, default value: 0x0c */
+#define REG_TTXNUMB				0x0116
+#define MSK_TTXNUMB_TTX_AFFCTRL_3_0		0xf0
+#define BIT_TTXNUMB_TTX_COM1_AT_SYNC_WAIT	BIT(3)
+#define MSK_TTXNUMB_TTX_NUMBPS			0x07
+
+/* TDM TX NUMSPISYM, default value: 0x04 */
+#define REG_TTXSPINUMS				0x0117
+
+/* TDM TX NUMHSICSYM, default value: 0x14 */
+#define REG_TTXHSICNUMS				0x0118
+
+/* TDM TX NUMTOTSYM, default value: 0x18 */
+#define REG_TTXTOTNUMS				0x0119
+
+/* TDM TX INT Low, default value: 0x00 */
+#define REG_TTXINTL				0x0136
+#define BIT_TTXINTL_TTX_INTR7			BIT(7)
+#define BIT_TTXINTL_TTX_INTR6			BIT(6)
+#define BIT_TTXINTL_TTX_INTR5			BIT(5)
+#define BIT_TTXINTL_TTX_INTR4			BIT(4)
+#define BIT_TTXINTL_TTX_INTR3			BIT(3)
+#define BIT_TTXINTL_TTX_INTR2			BIT(2)
+#define BIT_TTXINTL_TTX_INTR1			BIT(1)
+#define BIT_TTXINTL_TTX_INTR0			BIT(0)
+
+/* TDM TX INT High, default value: 0x00 */
+#define REG_TTXINTH				0x0137
+#define BIT_TTXINTH_TTX_INTR15			BIT(7)
+#define BIT_TTXINTH_TTX_INTR14			BIT(6)
+#define BIT_TTXINTH_TTX_INTR13			BIT(5)
+#define BIT_TTXINTH_TTX_INTR12			BIT(4)
+#define BIT_TTXINTH_TTX_INTR11			BIT(3)
+#define BIT_TTXINTH_TTX_INTR10			BIT(2)
+#define BIT_TTXINTH_TTX_INTR9			BIT(1)
+#define BIT_TTXINTH_TTX_INTR8			BIT(0)
+
+/* TDM RX Control, default value: 0x1c */
+#define REG_TRXCTRL				0x013b
+#define BIT_TRXCTRL_TRX_CLR_WVALLOW		BIT(4)
+#define BIT_TRXCTRL_TRX_FROM_SE_COC		BIT(3)
+#define MSK_TRXCTRL_TRX_NUMBPS_2_0		0x07
+
+/* TDM RX NUMSPISYM, default value: 0x04 */
+#define REG_TRXSPINUMS				0x013c
+
+/* TDM RX NUMHSICSYM, default value: 0x14 */
+#define REG_TRXHSICNUMS				0x013d
+
+/* TDM RX NUMTOTSYM, default value: 0x18 */
+#define REG_TRXTOTNUMS				0x013e
+
+/* TDM RX Status 2nd, default value: 0x00 */
+#define REG_TRXSTA2				0x015c
+#define MSK_TDM_SYNCHRONIZED			0xc0
+#define VAL_TDM_SYNCHRONIZED			0x80
+
+/* TDM RX INT Low, default value: 0x00 */
+#define REG_TRXINTL				0x0163
+
+/* TDM RX INT High, default value: 0x00 */
+#define REG_TRXINTH				0x0164
+#define BIT_TDM_INTR_SYNC_DATA			BIT(0)
+#define BIT_TDM_INTR_SYNC_WAIT			BIT(1)
+
+/* TDM RX INTMASK High, default value: 0x00 */
+#define REG_TRXINTMH				0x0166
+
+/* HSIC TX CRTL, default value: 0x00 */
+#define REG_HTXCTRL				0x0169
+#define BIT_HTXCTRL_HTX_ALLSBE_SOP		BIT(4)
+#define BIT_HTXCTRL_HTX_RGDINV_USB		BIT(3)
+#define BIT_HTXCTRL_HTX_RSPTDM_BUSY		BIT(2)
+#define BIT_HTXCTRL_HTX_DRVCONN1		BIT(1)
+#define BIT_HTXCTRL_HTX_DRVRST1			BIT(0)
+
+/* HSIC TX INT Low, default value: 0x00 */
+#define REG_HTXINTL				0x017d
+
+/* HSIC TX INT High, default value: 0x00 */
+#define REG_HTXINTH				0x017e
+
+/* HSIC Keeper, default value: 0x00 */
+#define REG_KEEPER				0x0181
+#define MSK_KEEPER_MODE				0x03
+#define VAL_KEEPER_MODE_HOST			0
+#define VAL_KEEPER_MODE_DEVICE			2
+
+/* HSIC Flow Control General, default value: 0x02 */
+#define REG_FCGC				0x0183
+#define BIT_FCGC_HSIC_HOSTMODE			BIT(1)
+#define BIT_FCGC_HSIC_ENABLE			BIT(0)
+
+/* HSIC Flow Control CTR13, default value: 0xfc */
+#define REG_FCCTR13				0x0191
+
+/* HSIC Flow Control CTR14, default value: 0xff */
+#define REG_FCCTR14				0x0192
+
+/* HSIC Flow Control CTR15, default value: 0xff */
+#define REG_FCCTR15				0x0193
+
+/* HSIC Flow Control CTR50, default value: 0x03 */
+#define REG_FCCTR50				0x01b6
+
+/* HSIC Flow Control INTR0, default value: 0x00 */
+#define REG_FCINTR0				0x01ec
+#define REG_FCINTR1				0x01ed
+#define REG_FCINTR2				0x01ee
+#define REG_FCINTR3				0x01ef
+#define REG_FCINTR4				0x01f0
+#define REG_FCINTR5				0x01f1
+#define REG_FCINTR6				0x01f2
+#define REG_FCINTR7				0x01f3
+
+/* TDM Low Latency, default value: 0x20 */
+#define REG_TDMLLCTL				0x01fc
+#define MSK_TDMLLCTL_TRX_LL_SEL_MANUAL		0xc0
+#define MSK_TDMLLCTL_TRX_LL_SEL_MODE		0x30
+#define MSK_TDMLLCTL_TTX_LL_SEL_MANUAL		0x0c
+#define BIT_TDMLLCTL_TTX_LL_TIE_LOW		BIT(1)
+#define BIT_TDMLLCTL_TTX_LL_SEL_MODE		BIT(0)
+
+/* TMDS 0 Clock Control, default value: 0x10 */
+#define REG_TMDS0_CCTRL1			0x0210
+#define MSK_TMDS0_CCTRL1_TEST_SEL		0xc0
+#define MSK_TMDS0_CCTRL1_CLK1X_CTL		0x30
+
+/* TMDS Clock Enable, default value: 0x00 */
+#define REG_TMDS_CLK_EN				0x0211
+#define BIT_TMDS_CLK_EN_CLK_EN			BIT(0)
+
+/* TMDS Channel Enable, default value: 0x00 */
+#define REG_TMDS_CH_EN				0x0212
+#define BIT_TMDS_CH_EN_CH0_EN			BIT(4)
+#define BIT_TMDS_CH_EN_CH12_EN			BIT(0)
+
+/* BGR_BIAS, default value: 0x07 */
+#define REG_BGR_BIAS				0x0215
+#define BIT_BGR_BIAS_BGR_EN			BIT(7)
+#define MSK_BGR_BIAS_BIAS_BGR_D			0x0f
+
+/* TMDS 0 Digital I2C BW, default value: 0x0a */
+#define REG_ALICE0_BW_I2C			0x0231
+
+/* TMDS 0 Digital Zone Control, default value: 0xe0 */
+#define REG_ALICE0_ZONE_CTRL			0x024c
+#define BIT_ALICE0_ZONE_CTRL_ICRST_N		BIT(7)
+#define BIT_ALICE0_ZONE_CTRL_USE_INT_DIV20	BIT(6)
+#define MSK_ALICE0_ZONE_CTRL_SZONE_I2C		0x30
+#define MSK_ALICE0_ZONE_CTRL_ZONE_CTRL		0x0f
+
+/* TMDS 0 Digital PLL Mode Control, default value: 0x00 */
+#define REG_ALICE0_MODE_CTRL			0x024d
+#define MSK_ALICE0_MODE_CTRL_PLL_MODE_I2C	0x0c
+#define MSK_ALICE0_MODE_CTRL_DIV20_CTRL		0x03
+
+/* MHL Tx Control 6th, default value: 0xa0 */
+#define REG_MHLTX_CTL6				0x0285
+#define MSK_MHLTX_CTL6_EMI_SEL			0xe0
+#define MSK_MHLTX_CTL6_TX_CLK_SHAPE_9_8		0x03
+
+/* Packet Filter0, default value: 0x00 */
+#define REG_PKT_FILTER_0			0x0290
+#define BIT_PKT_FILTER_0_DROP_CEA_GAMUT_PKT	BIT(7)
+#define BIT_PKT_FILTER_0_DROP_CEA_CP_PKT	BIT(6)
+#define BIT_PKT_FILTER_0_DROP_MPEG_PKT		BIT(5)
+#define BIT_PKT_FILTER_0_DROP_SPIF_PKT		BIT(4)
+#define BIT_PKT_FILTER_0_DROP_AIF_PKT		BIT(3)
+#define BIT_PKT_FILTER_0_DROP_AVI_PKT		BIT(2)
+#define BIT_PKT_FILTER_0_DROP_CTS_PKT		BIT(1)
+#define BIT_PKT_FILTER_0_DROP_GCP_PKT		BIT(0)
+
+/* Packet Filter1, default value: 0x00 */
+#define REG_PKT_FILTER_1			0x0291
+#define BIT_PKT_FILTER_1_VSI_OVERRIDE_DIS	BIT(7)
+#define BIT_PKT_FILTER_1_AVI_OVERRIDE_DIS	BIT(6)
+#define BIT_PKT_FILTER_1_DROP_AUDIO_PKT		BIT(3)
+#define BIT_PKT_FILTER_1_DROP_GEN2_PKT		BIT(2)
+#define BIT_PKT_FILTER_1_DROP_GEN_PKT		BIT(1)
+#define BIT_PKT_FILTER_1_DROP_VSIF_PKT		BIT(0)
+
+/* TMDS Clock Status, default value: 0x10 */
+#define REG_TMDS_CSTAT_P3			0x02a0
+#define BIT_TMDS_CSTAT_P3_RX_HDMI_CP_CLR_MUTE	BIT(7)
+#define BIT_TMDS_CSTAT_P3_RX_HDMI_CP_SET_MUTE	BIT(6)
+#define BIT_TMDS_CSTAT_P3_RX_HDMI_CP_NEW_CP	BIT(5)
+#define BIT_TMDS_CSTAT_P3_CLR_AVI		BIT(3)
+#define BIT_TMDS_CSTAT_P3_SCDT_CLR_AVI_DIS	BIT(2)
+#define BIT_TMDS_CSTAT_P3_SCDT			BIT(1)
+#define BIT_TMDS_CSTAT_P3_CKDT			BIT(0)
+
+/* RX_HDMI Control, default value: 0x10 */
+#define REG_RX_HDMI_CTRL0			0x02a1
+#define BIT_RX_HDMI_CTRL0_BYP_DVIFILT_SYNC	BIT(5)
+#define BIT_RX_HDMI_CTRL0_HDMI_MODE_EN_ITSELF_CLR BIT(4)
+#define BIT_RX_HDMI_CTRL0_HDMI_MODE_SW_VALUE	BIT(3)
+#define BIT_RX_HDMI_CTRL0_HDMI_MODE_OVERWRITE	BIT(2)
+#define BIT_RX_HDMI_CTRL0_RX_HDMI_HDMI_MODE_EN	BIT(1)
+#define BIT_RX_HDMI_CTRL0_RX_HDMI_HDMI_MODE	BIT(0)
+
+/* RX_HDMI Control, default value: 0x38 */
+#define REG_RX_HDMI_CTRL2			0x02a3
+#define MSK_RX_HDMI_CTRL2_IDLE_CNT		0xf0
+#define VAL_RX_HDMI_CTRL2_IDLE_CNT(n)		((n) << 4)
+#define BIT_RX_HDMI_CTRL2_USE_AV_MUTE		BIT(3)
+#define BIT_RX_HDMI_CTRL2_VSI_MON_SEL_VSI	BIT(0)
+
+/* RX_HDMI Control, default value: 0x0f */
+#define REG_RX_HDMI_CTRL3			0x02a4
+#define MSK_RX_HDMI_CTRL3_PP_MODE_CLK_EN	0x0f
+
+/* rx_hdmi Clear Buffer, default value: 0x00 */
+#define REG_RX_HDMI_CLR_BUFFER			0x02ac
+#define MSK_RX_HDMI_CLR_BUFFER_AIF4VSI_CMP	0xc0
+#define BIT_RX_HDMI_CLR_BUFFER_USE_AIF4VSI	BIT(5)
+#define BIT_RX_HDMI_CLR_BUFFER_VSI_CLR_W_AVI	BIT(4)
+#define BIT_RX_HDMI_CLR_BUFFER_VSI_IEEE_ID_CHK_EN BIT(3)
+#define BIT_RX_HDMI_CLR_BUFFER_SWAP_VSI_IEEE_ID	BIT(2)
+#define BIT_RX_HDMI_CLR_BUFFER_AIF_CLR_EN	BIT(1)
+#define BIT_RX_HDMI_CLR_BUFFER_VSI_CLR_EN	BIT(0)
+
+/* RX_HDMI VSI Header1, default value: 0x00 */
+#define REG_RX_HDMI_MON_PKT_HEADER1		0x02b8
+
+/* RX_HDMI VSI MHL Monitor, default value: 0x3c */
+#define REG_RX_HDMI_VSIF_MHL_MON		0x02d7
+
+#define MSK_RX_HDMI_VSIF_MHL_MON_RX_HDMI_MHL_3D_FORMAT 0x3c
+#define MSK_RX_HDMI_VSIF_MHL_MON_RX_HDMI_MHL_VID_FORMAT 0x03
+
+/* Interrupt Source 9, default value: 0x00 */
+#define REG_INTR9				0x02e0
+#define BIT_INTR9_EDID_ERROR			BIT(6)
+#define BIT_INTR9_EDID_DONE			BIT(5)
+#define BIT_INTR9_DEVCAP_DONE			BIT(4)
+
+/* Interrupt 9 Mask, default value: 0x00 */
+#define REG_INTR9_MASK				0x02e1
+
+/* TPI CBUS Start, default value: 0x00 */
+#define REG_TPI_CBUS_START			0x02e2
+#define BIT_TPI_CBUS_START_RCP_REQ_START	BIT(7)
+#define BIT_TPI_CBUS_START_RCPK_REPLY_START	BIT(6)
+#define BIT_TPI_CBUS_START_RCPE_REPLY_START	BIT(5)
+#define BIT_TPI_CBUS_START_PUT_LINK_MODE_START	BIT(4)
+#define BIT_TPI_CBUS_START_PUT_DCAPCHG_START	BIT(3)
+#define BIT_TPI_CBUS_START_PUT_DCAPRDY_START	BIT(2)
+#define BIT_TPI_CBUS_START_GET_EDID_START_0	BIT(1)
+#define BIT_TPI_CBUS_START_GET_DEVCAP_START	BIT(0)
+
+/* EDID Control, default value: 0x10 */
+#define REG_EDID_CTRL				0x02e3
+#define BIT_EDID_CTRL_EDID_PRIME_VALID		BIT(7)
+#define BIT_EDID_CTRL_XDEVCAP_EN		BIT(6)
+#define BIT_EDID_CTRL_DEVCAP_SELECT_DEVCAP	BIT(5)
+#define BIT_EDID_CTRL_EDID_FIFO_ADDR_AUTO	BIT(4)
+#define BIT_EDID_CTRL_EDID_FIFO_ACCESS_ALWAYS_EN BIT(3)
+#define BIT_EDID_CTRL_EDID_FIFO_BLOCK_SEL	BIT(2)
+#define BIT_EDID_CTRL_INVALID_BKSV		BIT(1)
+#define BIT_EDID_CTRL_EDID_MODE_EN		BIT(0)
+
+/* EDID FIFO Addr, default value: 0x00 */
+#define REG_EDID_FIFO_ADDR			0x02e9
+
+/* EDID FIFO Write Data, default value: 0x00 */
+#define REG_EDID_FIFO_WR_DATA			0x02ea
+
+/* EDID/DEVCAP FIFO Internal Addr, default value: 0x00 */
+#define REG_EDID_FIFO_ADDR_MON			0x02eb
+
+/* EDID FIFO Read Data, default value: 0x00 */
+#define REG_EDID_FIFO_RD_DATA			0x02ec
+
+/* EDID DDC Segment Pointer, default value: 0x00 */
+#define REG_EDID_START_EXT			0x02ed
+
+/* TX IP BIST CNTL and Status, default value: 0x00 */
+#define REG_TX_IP_BIST_CNTLSTA			0x02f2
+#define BIT_TX_IP_BIST_CNTLSTA_TXBIST_QUARTER_CLK_SEL BIT(6)
+#define BIT_TX_IP_BIST_CNTLSTA_TXBIST_DONE	BIT(5)
+#define BIT_TX_IP_BIST_CNTLSTA_TXBIST_ON	BIT(4)
+#define BIT_TX_IP_BIST_CNTLSTA_TXBIST_RUN	BIT(3)
+#define BIT_TX_IP_BIST_CNTLSTA_TXCLK_HALF_SEL	BIT(2)
+#define BIT_TX_IP_BIST_CNTLSTA_TXBIST_EN	BIT(1)
+#define BIT_TX_IP_BIST_CNTLSTA_TXBIST_SEL	BIT(0)
+
+/* TX IP BIST INST LOW, default value: 0x00 */
+#define REG_TX_IP_BIST_INST_LOW			0x02f3
+#define REG_TX_IP_BIST_INST_HIGH		0x02f4
+
+/* TX IP BIST PATTERN LOW, default value: 0x00 */
+#define REG_TX_IP_BIST_PAT_LOW			0x02f5
+#define REG_TX_IP_BIST_PAT_HIGH			0x02f6
+
+/* TX IP BIST CONFIGURE LOW, default value: 0x00 */
+#define REG_TX_IP_BIST_CONF_LOW			0x02f7
+#define REG_TX_IP_BIST_CONF_HIGH		0x02f8
+
+/* E-MSC General Control, default value: 0x80 */
+#define REG_GENCTL				0x0300
+#define BIT_GENCTL_SPEC_TRANS_DIS		BIT(7)
+#define BIT_GENCTL_DIS_XMIT_ERR_STATE		BIT(6)
+#define BIT_GENCTL_SPI_MISO_EDGE		BIT(5)
+#define BIT_GENCTL_SPI_MOSI_EDGE		BIT(4)
+#define BIT_GENCTL_CLR_EMSC_RFIFO		BIT(3)
+#define BIT_GENCTL_CLR_EMSC_XFIFO		BIT(2)
+#define BIT_GENCTL_START_TRAIN_SEQ		BIT(1)
+#define BIT_GENCTL_EMSC_EN			BIT(0)
+
+/* E-MSC Comma ErrorCNT, default value: 0x03 */
+#define REG_COMMECNT				0x0305
+#define BIT_COMMECNT_I2C_TO_EMSC_EN		BIT(7)
+#define MSK_COMMECNT_COMMA_CHAR_ERR_CNT		0x0f
+
+/* E-MSC RFIFO ByteCnt, default value: 0x00 */
+#define REG_EMSCRFIFOBCNTL			0x031a
+#define REG_EMSCRFIFOBCNTH			0x031b
+
+/* SPI Burst Cnt Status, default value: 0x00 */
+#define REG_SPIBURSTCNT				0x031e
+
+/* SPI Burst Status and SWRST, default value: 0x00 */
+#define REG_SPIBURSTSTAT			0x0322
+#define BIT_SPIBURSTSTAT_SPI_HDCPRST		BIT(7)
+#define BIT_SPIBURSTSTAT_SPI_CBUSRST		BIT(6)
+#define BIT_SPIBURSTSTAT_SPI_SRST		BIT(5)
+#define BIT_SPIBURSTSTAT_EMSC_NORMAL_MODE	BIT(0)
+
+/* E-MSC 1st Interrupt, default value: 0x00 */
+#define REG_EMSCINTR				0x0323
+#define BIT_EMSCINTR_EMSC_XFIFO_EMPTY		BIT(7)
+#define BIT_EMSCINTR_EMSC_XMIT_ACK_TOUT		BIT(6)
+#define BIT_EMSCINTR_EMSC_RFIFO_READ_ERR	BIT(5)
+#define BIT_EMSCINTR_EMSC_XFIFO_WRITE_ERR	BIT(4)
+#define BIT_EMSCINTR_EMSC_COMMA_CHAR_ERR	BIT(3)
+#define BIT_EMSCINTR_EMSC_XMIT_DONE		BIT(2)
+#define BIT_EMSCINTR_EMSC_XMIT_GNT_TOUT		BIT(1)
+#define BIT_EMSCINTR_SPI_DVLD		BIT(0)
+
+/* E-MSC Interrupt Mask, default value: 0x00 */
+#define REG_EMSCINTRMASK			0x0324
+
+/* I2C E-MSC XMIT FIFO Write Port, default value: 0x00 */
+#define REG_EMSC_XMIT_WRITE_PORT		0x032a
+
+/* I2C E-MSC RCV FIFO Write Port, default value: 0x00 */
+#define REG_EMSC_RCV_READ_PORT			0x032b
+
+/* E-MSC 2nd Interrupt, default value: 0x00 */
+#define REG_EMSCINTR1				0x032c
+#define BIT_EMSCINTR1_EMSC_TRAINING_COMMA_ERR	BIT(0)
+
+/* E-MSC Interrupt Mask, default value: 0x00 */
+#define REG_EMSCINTRMASK1			0x032d
+#define BIT_EMSCINTRMASK1_EMSC_INTRMASK1_0	BIT(0)
+
+/* MHL Top Ctl, default value: 0x00 */
+#define REG_MHL_TOP_CTL				0x0330
+#define BIT_MHL_TOP_CTL_MHL3_DOC_SEL		BIT(7)
+#define BIT_MHL_TOP_CTL_MHL_PP_SEL		BIT(6)
+#define MSK_MHL_TOP_CTL_IF_TIMING_CTL		0x03
+
+/* MHL DataPath 1st Ctl, default value: 0xbc */
+#define REG_MHL_DP_CTL0				0x0331
+#define BIT_MHL_DP_CTL0_DP_OE			BIT(7)
+#define BIT_MHL_DP_CTL0_TX_OE_OVR		BIT(6)
+#define MSK_MHL_DP_CTL0_TX_OE			0x3f
+
+/* MHL DataPath 2nd Ctl, default value: 0xbb */
+#define REG_MHL_DP_CTL1				0x0332
+#define MSK_MHL_DP_CTL1_CK_SWING_CTL		0xf0
+#define MSK_MHL_DP_CTL1_DT_SWING_CTL		0x0f
+
+/* MHL DataPath 3rd Ctl, default value: 0x2f */
+#define REG_MHL_DP_CTL2				0x0333
+#define BIT_MHL_DP_CTL2_CLK_BYPASS_EN		BIT(7)
+#define MSK_MHL_DP_CTL2_DAMP_TERM_SEL		0x30
+#define MSK_MHL_DP_CTL2_CK_TERM_SEL		0x0c
+#define MSK_MHL_DP_CTL2_DT_TERM_SEL		0x03
+
+/* MHL DataPath 4th Ctl, default value: 0x48 */
+#define REG_MHL_DP_CTL3				0x0334
+#define MSK_MHL_DP_CTL3_DT_DRV_VNBC_CTL		0xf0
+#define MSK_MHL_DP_CTL3_DT_DRV_VNB_CTL		0x0f
+
+/* MHL DataPath 5th Ctl, default value: 0x48 */
+#define REG_MHL_DP_CTL4				0x0335
+#define MSK_MHL_DP_CTL4_CK_DRV_VNBC_CTL		0xf0
+#define MSK_MHL_DP_CTL4_CK_DRV_VNB_CTL		0x0f
+
+/* MHL DataPath 6th Ctl, default value: 0x3f */
+#define REG_MHL_DP_CTL5				0x0336
+#define BIT_MHL_DP_CTL5_RSEN_EN_OVR		BIT(7)
+#define BIT_MHL_DP_CTL5_RSEN_EN			BIT(6)
+#define MSK_MHL_DP_CTL5_DAMP_TERM_VGS_CTL	0x30
+#define MSK_MHL_DP_CTL5_CK_TERM_VGS_CTL		0x0c
+#define MSK_MHL_DP_CTL5_DT_TERM_VGS_CTL		0x03
+
+/* MHL PLL 1st Ctl, default value: 0x05 */
+#define REG_MHL_PLL_CTL0			0x0337
+#define BIT_MHL_PLL_CTL0_AUD_CLK_EN		BIT(7)
+
+#define MSK_MHL_PLL_CTL0_AUD_CLK_RATIO		0x70
+#define VAL_MHL_PLL_CTL0_AUD_CLK_RATIO_5_10	0x70
+#define VAL_MHL_PLL_CTL0_AUD_CLK_RATIO_5_6	0x60
+#define VAL_MHL_PLL_CTL0_AUD_CLK_RATIO_5_4	0x50
+#define VAL_MHL_PLL_CTL0_AUD_CLK_RATIO_5_2	0x40
+#define VAL_MHL_PLL_CTL0_AUD_CLK_RATIO_5_5	0x30
+#define VAL_MHL_PLL_CTL0_AUD_CLK_RATIO_5_3	0x20
+#define VAL_MHL_PLL_CTL0_AUD_CLK_RATIO_5_2_PRIME 0x10
+#define VAL_MHL_PLL_CTL0_AUD_CLK_RATIO_5_1	0x00
+
+#define MSK_MHL_PLL_CTL0_HDMI_CLK_RATIO		0x0c
+#define VAL_MHL_PLL_CTL0_HDMI_CLK_RATIO_4X	0x0c
+#define VAL_MHL_PLL_CTL0_HDMI_CLK_RATIO_2X	0x08
+#define VAL_MHL_PLL_CTL0_HDMI_CLK_RATIO_1X	0x04
+#define VAL_MHL_PLL_CTL0_HDMI_CLK_RATIO_HALF_X	0x00
+
+#define BIT_MHL_PLL_CTL0_CRYSTAL_CLK_SEL	BIT(1)
+#define BIT_MHL_PLL_CTL0_ZONE_MASK_OE		BIT(0)
+
+/* MHL PLL 3rd Ctl, default value: 0x80 */
+#define REG_MHL_PLL_CTL2			0x0339
+#define BIT_MHL_PLL_CTL2_CLKDETECT_EN		BIT(7)
+#define BIT_MHL_PLL_CTL2_MEAS_FVCO		BIT(3)
+#define BIT_MHL_PLL_CTL2_PLL_FAST_LOCK		BIT(2)
+#define MSK_MHL_PLL_CTL2_PLL_LF_SEL		0x03
+
+/* MHL CBUS 1st Ctl, default value: 0x12 */
+#define REG_MHL_CBUS_CTL0			0x0340
+#define BIT_MHL_CBUS_CTL0_CBUS_RGND_TEST_MODE	BIT(7)
+
+#define MSK_MHL_CBUS_CTL0_CBUS_RGND_VTH_CTL	0x30
+#define VAL_MHL_CBUS_CTL0_CBUS_RGND_VBIAS_734	0x00
+#define VAL_MHL_CBUS_CTL0_CBUS_RGND_VBIAS_747	0x10
+#define VAL_MHL_CBUS_CTL0_CBUS_RGND_VBIAS_740	0x20
+#define VAL_MHL_CBUS_CTL0_CBUS_RGND_VBIAS_754	0x30
+
+#define MSK_MHL_CBUS_CTL0_CBUS_RES_TEST_SEL	0x0c
+
+#define MSK_MHL_CBUS_CTL0_CBUS_DRV_SEL		0x03
+#define VAL_MHL_CBUS_CTL0_CBUS_DRV_SEL_WEAKEST	0x00
+#define VAL_MHL_CBUS_CTL0_CBUS_DRV_SEL_WEAK	0x01
+#define VAL_MHL_CBUS_CTL0_CBUS_DRV_SEL_STRONG	0x02
+#define VAL_MHL_CBUS_CTL0_CBUS_DRV_SEL_STRONGEST 0x03
+
+/* MHL CBUS 2nd Ctl, default value: 0x03 */
+#define REG_MHL_CBUS_CTL1			0x0341
+#define MSK_MHL_CBUS_CTL1_CBUS_RGND_RES_CTL	0x07
+#define VAL_MHL_CBUS_CTL1_0888_OHM		0x00
+#define VAL_MHL_CBUS_CTL1_1115_OHM		0x04
+#define VAL_MHL_CBUS_CTL1_1378_OHM		0x07
+
+/* MHL CoC 1st Ctl, default value: 0xc3 */
+#define REG_MHL_COC_CTL0			0x0342
+#define BIT_MHL_COC_CTL0_COC_BIAS_EN		BIT(7)
+#define MSK_MHL_COC_CTL0_COC_BIAS_CTL		0x70
+#define MSK_MHL_COC_CTL0_COC_TERM_CTL		0x07
+
+/* MHL CoC 2nd Ctl, default value: 0x87 */
+#define REG_MHL_COC_CTL1			0x0343
+#define BIT_MHL_COC_CTL1_COC_EN			BIT(7)
+#define MSK_MHL_COC_CTL1_COC_DRV_CTL		0x3f
+
+/* MHL CoC 4th Ctl, default value: 0x00 */
+#define REG_MHL_COC_CTL3			0x0345
+#define BIT_MHL_COC_CTL3_COC_AECHO_EN		BIT(0)
+
+/* MHL CoC 5th Ctl, default value: 0x28 */
+#define REG_MHL_COC_CTL4			0x0346
+#define MSK_MHL_COC_CTL4_COC_IF_CTL		0xf0
+#define MSK_MHL_COC_CTL4_COC_SLEW_CTL		0x0f
+
+/* MHL CoC 6th Ctl, default value: 0x0d */
+#define REG_MHL_COC_CTL5			0x0347
+
+/* MHL DoC 1st Ctl, default value: 0x18 */
+#define REG_MHL_DOC_CTL0			0x0349
+#define BIT_MHL_DOC_CTL0_DOC_RXDATA_EN		BIT(7)
+#define MSK_MHL_DOC_CTL0_DOC_DM_TERM		0x38
+#define MSK_MHL_DOC_CTL0_DOC_OPMODE		0x06
+#define BIT_MHL_DOC_CTL0_DOC_RXBIAS_EN		BIT(0)
+
+/* MHL DataPath 7th Ctl, default value: 0x2a */
+#define REG_MHL_DP_CTL6				0x0350
+#define BIT_MHL_DP_CTL6_DP_TAP2_SGN		BIT(5)
+#define BIT_MHL_DP_CTL6_DP_TAP2_EN		BIT(4)
+#define BIT_MHL_DP_CTL6_DP_TAP1_SGN		BIT(3)
+#define BIT_MHL_DP_CTL6_DP_TAP1_EN		BIT(2)
+#define BIT_MHL_DP_CTL6_DT_PREDRV_FEEDCAP_EN	BIT(1)
+#define BIT_MHL_DP_CTL6_DP_PRE_POST_SEL		BIT(0)
+
+/* MHL DataPath 8th Ctl, default value: 0x06 */
+#define REG_MHL_DP_CTL7				0x0351
+#define MSK_MHL_DP_CTL7_DT_DRV_VBIAS_CASCTL	0xf0
+#define MSK_MHL_DP_CTL7_DT_DRV_IREF_CTL		0x0f
+
+#define REG_MHL_DP_CTL8				0x0352
+
+/* Tx Zone Ctl1, default value: 0x00 */
+#define REG_TX_ZONE_CTL1			0x0361
+#define VAL_TX_ZONE_CTL1_TX_ZONE_CTRL_MODE	0x08
+
+/* MHL3 Tx Zone Ctl, default value: 0x00 */
+#define REG_MHL3_TX_ZONE_CTL			0x0364
+#define BIT_MHL3_TX_ZONE_CTL_MHL2_INTPLT_ZONE_MANU_EN BIT(7)
+#define MSK_MHL3_TX_ZONE_CTL_MHL3_TX_ZONE	0x03
+
+#define MSK_TX_ZONE_CTL3_TX_ZONE		0x03
+#define VAL_TX_ZONE_CTL3_TX_ZONE_6GBPS		0x00
+#define VAL_TX_ZONE_CTL3_TX_ZONE_3GBPS		0x01
+#define VAL_TX_ZONE_CTL3_TX_ZONE_1_5GBPS	0x02
+
+/* HDCP Polling Control and Status, default value: 0x70 */
+#define REG_HDCP2X_POLL_CS			0x0391
+
+#define BIT_HDCP2X_POLL_CS_HDCP2X_MSG_SZ_CLR_OPTION BIT(6)
+#define BIT_HDCP2X_POLL_CS_HDCP2X_RPT_READY_CLR_OPTION BIT(5)
+#define BIT_HDCP2X_POLL_CS_HDCP2X_REAUTH_REQ_CLR_OPTION BIT(4)
+#define MSK_HDCP2X_POLL_CS_			0x0c
+#define BIT_HDCP2X_POLL_CS_HDCP2X_DIS_POLL_GNT	BIT(1)
+#define BIT_HDCP2X_POLL_CS_HDCP2X_DIS_POLL_EN	BIT(0)
+
+/* HDCP Interrupt 0, default value: 0x00 */
+#define REG_HDCP2X_INTR0			0x0398
+
+/* HDCP Interrupt 0 Mask, default value: 0x00 */
+#define REG_HDCP2X_INTR0_MASK			0x0399
+
+/* HDCP General Control 0, default value: 0x02 */
+#define REG_HDCP2X_CTRL_0			0x03a0
+#define BIT_HDCP2X_CTRL_0_HDCP2X_ENCRYPT_EN	BIT(7)
+#define BIT_HDCP2X_CTRL_0_HDCP2X_POLINT_SEL	BIT(6)
+#define BIT_HDCP2X_CTRL_0_HDCP2X_POLINT_OVR	BIT(5)
+#define BIT_HDCP2X_CTRL_0_HDCP2X_PRECOMPUTE	BIT(4)
+#define BIT_HDCP2X_CTRL_0_HDCP2X_HDMIMODE	BIT(3)
+#define BIT_HDCP2X_CTRL_0_HDCP2X_REPEATER	BIT(2)
+#define BIT_HDCP2X_CTRL_0_HDCP2X_HDCPTX		BIT(1)
+#define BIT_HDCP2X_CTRL_0_HDCP2X_EN		BIT(0)
+
+/* HDCP General Control 1, default value: 0x08 */
+#define REG_HDCP2X_CTRL_1			0x03a1
+#define MSK_HDCP2X_CTRL_1_HDCP2X_REAUTH_MSK_3_0	0xf0
+#define BIT_HDCP2X_CTRL_1_HDCP2X_HPD_SW		BIT(3)
+#define BIT_HDCP2X_CTRL_1_HDCP2X_HPD_OVR	BIT(2)
+#define BIT_HDCP2X_CTRL_1_HDCP2X_CTL3MSK	BIT(1)
+#define BIT_HDCP2X_CTRL_1_HDCP2X_REAUTH_SW	BIT(0)
+
+/* HDCP Misc Control, default value: 0x00 */
+#define REG_HDCP2X_MISC_CTRL			0x03a5
+#define BIT_HDCP2X_MISC_CTRL_HDCP2X_RPT_SMNG_XFER_START BIT(4)
+#define BIT_HDCP2X_MISC_CTRL_HDCP2X_RPT_SMNG_WR_START BIT(3)
+#define BIT_HDCP2X_MISC_CTRL_HDCP2X_RPT_SMNG_WR	BIT(2)
+#define BIT_HDCP2X_MISC_CTRL_HDCP2X_RPT_RCVID_RD_START BIT(1)
+#define BIT_HDCP2X_MISC_CTRL_HDCP2X_RPT_RCVID_RD	BIT(0)
+
+/* HDCP RPT SMNG K, default value: 0x00 */
+#define REG_HDCP2X_RPT_SMNG_K			0x03a6
+
+/* HDCP RPT SMNG In, default value: 0x00 */
+#define REG_HDCP2X_RPT_SMNG_IN			0x03a7
+
+/* HDCP Auth Status, default value: 0x00 */
+#define REG_HDCP2X_AUTH_STAT			0x03aa
+
+/* HDCP RPT RCVID Out, default value: 0x00 */
+#define REG_HDCP2X_RPT_RCVID_OUT		0x03ac
+
+/* HDCP TP1, default value: 0x62 */
+#define REG_HDCP2X_TP1				0x03b4
+
+/* HDCP GP Out 0, default value: 0x00 */
+#define REG_HDCP2X_GP_OUT0			0x03c7
+
+/* HDCP Repeater RCVR ID 0, default value: 0x00 */
+#define REG_HDCP2X_RPT_RCVR_ID0			0x03d1
+
+/* HDCP DDCM Status, default value: 0x00 */
+#define REG_HDCP2X_DDCM_STS			0x03d8
+#define MSK_HDCP2X_DDCM_STS_HDCP2X_DDCM_ERR_STS_3_0 0xf0
+#define MSK_HDCP2X_DDCM_STS_HDCP2X_DDCM_CTL_CS_3_0 0x0f
+
+/* HDMI2MHL3 Control, default value: 0x0a */
+#define REG_M3_CTRL				0x03e0
+#define BIT_M3_CTRL_H2M_SWRST			BIT(4)
+#define BIT_M3_CTRL_SW_MHL3_SEL			BIT(3)
+#define BIT_M3_CTRL_M3AV_EN			BIT(2)
+#define BIT_M3_CTRL_ENC_TMDS			BIT(1)
+#define BIT_M3_CTRL_MHL3_MASTER_EN		BIT(0)
+
+#define VAL_M3_CTRL_MHL1_2_VALUE (BIT_M3_CTRL_SW_MHL3_SEL \
+				  | BIT_M3_CTRL_ENC_TMDS)
+#define VAL_M3_CTRL_MHL3_VALUE (BIT_M3_CTRL_SW_MHL3_SEL \
+				| BIT_M3_CTRL_M3AV_EN \
+				| BIT_M3_CTRL_ENC_TMDS \
+				| BIT_M3_CTRL_MHL3_MASTER_EN)
+
+/* HDMI2MHL3 Port0 Control, default value: 0x04 */
+#define REG_M3_P0CTRL				0x03e1
+#define BIT_M3_P0CTRL_MHL3_P0_HDCP_ENC_EN	BIT(4)
+#define BIT_M3_P0CTRL_MHL3_P0_UNLIMIT_EN	BIT(3)
+#define BIT_M3_P0CTRL_MHL3_P0_HDCP_EN		BIT(2)
+#define BIT_M3_P0CTRL_MHL3_P0_PIXEL_MODE_PACKED	BIT(1)
+#define BIT_M3_P0CTRL_MHL3_P0_PORT_EN		BIT(0)
+
+#define REG_M3_POSTM				0x03e2
+#define MSK_M3_POSTM_RRP_DECODE			0xf8
+#define MSK_M3_POSTM_MHL3_P0_STM_ID		0x07
+
+/* HDMI2MHL3 Scramble Control, default value: 0x41 */
+#define REG_M3_SCTRL				0x03e6
+#define MSK_M3_SCTRL_MHL3_SR_LENGTH		0xf0
+#define BIT_M3_SCTRL_MHL3_SCRAMBLER_EN		BIT(0)
+
+/* HSIC Div Ctl, default value: 0x05 */
+#define REG_DIV_CTL_MAIN			0x03f2
+#define MSK_DIV_CTL_MAIN_PRE_DIV_CTL_MAIN	0x1c
+#define MSK_DIV_CTL_MAIN_FB_DIV_CTL_MAIN	0x03
+
+/* MHL Capability 1st Byte, default value: 0x00 */
+#define REG_MHL_DEVCAP_0			0x0400
+
+/* MHL Interrupt 1st Byte, default value: 0x00 */
+#define REG_MHL_INT_0				0x0420
+
+/* Device Status 1st byte, default value: 0x00 */
+#define REG_MHL_STAT_0				0x0430
+
+/* CBUS Scratch Pad 1st Byte, default value: 0x00 */
+#define REG_MHL_SCRPAD_0			0x0440
+
+/* MHL Extended Capability 1st Byte, default value: 0x00 */
+#define REG_MHL_EXTDEVCAP_0			0x0480
+
+/* Device Extended Status 1st byte, default value: 0x00 */
+#define REG_MHL_EXTSTAT_0			0x0490
+
+/* TPI DTD Byte2, default value: 0x00 */
+#define REG_TPI_DTD_B2				0x0602
+
+#define VAL_TPI_QUAN_RANGE_LIMITED		0x01
+#define VAL_TPI_QUAN_RANGE_FULL			0x02
+#define VAL_TPI_FORMAT_RGB			0x00
+#define VAL_TPI_FORMAT_YCBCR444			0x01
+#define VAL_TPI_FORMAT_YCBCR422			0x02
+#define VAL_TPI_FORMAT_INTERNAL_RGB		0x03
+#define VAL_TPI_FORMAT(_fmt, _qr) \
+		(VAL_TPI_FORMAT_##_fmt | (VAL_TPI_QUAN_RANGE_##_qr << 2))
+
+/* Input Format, default value: 0x00 */
+#define REG_TPI_INPUT				0x0609
+#define BIT_TPI_INPUT_EXTENDEDBITMODE		BIT(7)
+#define BIT_TPI_INPUT_ENDITHER			BIT(6)
+#define MSK_TPI_INPUT_INPUT_QUAN_RANGE		0x0c
+#define MSK_TPI_INPUT_INPUT_FORMAT		0x03
+
+/* Output Format, default value: 0x00 */
+#define REG_TPI_OUTPUT				0x060a
+#define BIT_TPI_OUTPUT_CSCMODE709		BIT(4)
+#define MSK_TPI_OUTPUT_OUTPUT_QUAN_RANGE	0x0c
+#define MSK_TPI_OUTPUT_OUTPUT_FORMAT		0x03
+
+/* TPI AVI Check Sum, default value: 0x00 */
+#define REG_TPI_AVI_CHSUM			0x060c
+
+/* TPI System Control, default value: 0x00 */
+#define REG_TPI_SC				0x061a
+#define BIT_TPI_SC_TPI_UPDATE_FLG		BIT(7)
+#define BIT_TPI_SC_TPI_REAUTH_CTL		BIT(6)
+#define BIT_TPI_SC_TPI_OUTPUT_MODE_1		BIT(5)
+#define BIT_TPI_SC_REG_TMDS_OE_POWER_DOWN	BIT(4)
+#define BIT_TPI_SC_TPI_AV_MUTE			BIT(3)
+#define BIT_TPI_SC_DDC_GPU_REQUEST		BIT(2)
+#define BIT_TPI_SC_DDC_TPI_SW			BIT(1)
+#define BIT_TPI_SC_TPI_OUTPUT_MODE_0_HDMI	BIT(0)
+
+/* TPI COPP Query Data, default value: 0x00 */
+#define REG_TPI_COPP_DATA1			0x0629
+#define BIT_TPI_COPP_DATA1_COPP_GPROT		BIT(7)
+#define BIT_TPI_COPP_DATA1_COPP_LPROT		BIT(6)
+#define MSK_TPI_COPP_DATA1_COPP_LINK_STATUS	0x30
+#define VAL_TPI_COPP_LINK_STATUS_NORMAL		0x00
+#define VAL_TPI_COPP_LINK_STATUS_LINK_LOST	0x10
+#define VAL_TPI_COPP_LINK_STATUS_RENEGOTIATION_REQ 0x20
+#define VAL_TPI_COPP_LINK_STATUS_LINK_SUSPENDED	0x30
+#define BIT_TPI_COPP_DATA1_COPP_HDCP_REP	BIT(3)
+#define BIT_TPI_COPP_DATA1_COPP_CONNTYPE_0	BIT(2)
+#define BIT_TPI_COPP_DATA1_COPP_PROTYPE		BIT(1)
+#define BIT_TPI_COPP_DATA1_COPP_CONNTYPE_1	BIT(0)
+
+/* TPI COPP Control Data, default value: 0x00 */
+#define REG_TPI_COPP_DATA2			0x062a
+#define BIT_TPI_COPP_DATA2_INTR_ENCRYPTION	BIT(5)
+#define BIT_TPI_COPP_DATA2_KSV_FORWARD		BIT(4)
+#define BIT_TPI_COPP_DATA2_INTERM_RI_CHECK_EN	BIT(3)
+#define BIT_TPI_COPP_DATA2_DOUBLE_RI_CHECK	BIT(2)
+#define BIT_TPI_COPP_DATA2_DDC_SHORT_RI_RD	BIT(1)
+#define BIT_TPI_COPP_DATA2_COPP_PROTLEVEL	BIT(0)
+
+/* TPI Interrupt Enable, default value: 0x00 */
+#define REG_TPI_INTR_EN				0x063c
+
+/* TPI Interrupt Status Low Byte, default value: 0x00 */
+#define REG_TPI_INTR_ST0			0x063d
+#define BIT_TPI_INTR_ST0_TPI_AUTH_CHNGE_STAT	BIT(7)
+#define BIT_TPI_INTR_ST0_TPI_V_RDY_STAT		BIT(6)
+#define BIT_TPI_INTR_ST0_TPI_COPP_CHNGE_STAT	BIT(5)
+#define BIT_TPI_INTR_ST0_KSV_FIFO_FIRST_STAT	BIT(3)
+#define BIT_TPI_INTR_ST0_READ_BKSV_BCAPS_DONE_STAT BIT(2)
+#define BIT_TPI_INTR_ST0_READ_BKSV_BCAPS_ERR_STAT BIT(1)
+#define BIT_TPI_INTR_ST0_READ_BKSV_ERR_STAT	BIT(0)
+
+/* TPI DS BCAPS Status, default value: 0x00 */
+#define REG_TPI_DS_BCAPS			0x0644
+
+/* TPI BStatus1, default value: 0x00 */
+#define REG_TPI_BSTATUS1			0x0645
+#define BIT_TPI_BSTATUS1_DS_DEV_EXCEED		BIT(7)
+#define MSK_TPI_BSTATUS1_DS_DEV_CNT		0x7f
+
+/* TPI BStatus2, default value: 0x10 */
+#define REG_TPI_BSTATUS2			0x0646
+#define MSK_TPI_BSTATUS2_DS_BSTATUS		0xe0
+#define BIT_TPI_BSTATUS2_DS_HDMI_MODE		BIT(4)
+#define BIT_TPI_BSTATUS2_DS_CASC_EXCEED		BIT(3)
+#define MSK_TPI_BSTATUS2_DS_DEPTH		0x07
+
+/* TPI HW Optimization Control #3, default value: 0x00 */
+#define REG_TPI_HW_OPT3				0x06bb
+#define BIT_TPI_HW_OPT3_DDC_DEBUG		BIT(7)
+#define BIT_TPI_HW_OPT3_RI_CHECK_SKIP		BIT(3)
+#define BIT_TPI_HW_OPT3_TPI_DDC_BURST_MODE	BIT(2)
+#define MSK_TPI_HW_OPT3_TPI_DDC_REQ_LEVEL	0x03
+
+/* TPI Info Frame Select, default value: 0x00 */
+#define REG_TPI_INFO_FSEL			0x06bf
+#define BIT_TPI_INFO_FSEL_EN			BIT(7)
+#define BIT_TPI_INFO_FSEL_RPT			BIT(6)
+#define BIT_TPI_INFO_FSEL_READ_FLAG		BIT(5)
+#define MSK_TPI_INFO_FSEL_PKT			0x07
+#define VAL_TPI_INFO_FSEL_AVI			0x00
+#define VAL_TPI_INFO_FSEL_SPD			0x01
+#define VAL_TPI_INFO_FSEL_AUD			0x02
+#define VAL_TPI_INFO_FSEL_MPG			0x03
+#define VAL_TPI_INFO_FSEL_GEN			0x04
+#define VAL_TPI_INFO_FSEL_GEN2			0x05
+#define VAL_TPI_INFO_FSEL_VSI			0x06
+
+/* TPI Info Byte #0, default value: 0x00 */
+#define REG_TPI_INFO_B0				0x06c0
+
+/* CoC Status, default value: 0x00 */
+#define REG_COC_STAT_0				0x0700
+#define BIT_COC_STAT_0_PLL_LOCKED		BIT(7)
+#define MSK_COC_STAT_0_FSM_STATE		0x0f
+
+#define REG_COC_STAT_1				0x0701
+#define REG_COC_STAT_2				0x0702
+#define REG_COC_STAT_3				0x0703
+#define REG_COC_STAT_4				0x0704
+#define REG_COC_STAT_5				0x0705
+
+/* CoC 1st Ctl, default value: 0x40 */
+#define REG_COC_CTL0				0x0710
+
+/* CoC 2nd Ctl, default value: 0x0a */
+#define REG_COC_CTL1				0x0711
+#define MSK_COC_CTL1_COC_CTRL1_7_6		0xc0
+#define MSK_COC_CTL1_COC_CTRL1_5_0		0x3f
+
+/* CoC 3rd Ctl, default value: 0x14 */
+#define REG_COC_CTL2				0x0712
+#define MSK_COC_CTL2_COC_CTRL2_7_6		0xc0
+#define MSK_COC_CTL2_COC_CTRL2_5_0		0x3f
+
+/* CoC 4th Ctl, default value: 0x40 */
+#define REG_COC_CTL3				0x0713
+#define BIT_COC_CTL3_COC_CTRL3_7		BIT(7)
+#define MSK_COC_CTL3_COC_CTRL3_6_0		0x7f
+
+/* CoC 7th Ctl, default value: 0x00 */
+#define REG_COC_CTL6				0x0716
+#define BIT_COC_CTL6_COC_CTRL6_7		BIT(7)
+#define BIT_COC_CTL6_COC_CTRL6_6		BIT(6)
+#define MSK_COC_CTL6_COC_CTRL6_5_0		0x3f
+
+/* CoC 8th Ctl, default value: 0x06 */
+#define REG_COC_CTL7				0x0717
+#define BIT_COC_CTL7_COC_CTRL7_7		BIT(7)
+#define BIT_COC_CTL7_COC_CTRL7_6		BIT(6)
+#define BIT_COC_CTL7_COC_CTRL7_5		BIT(5)
+#define MSK_COC_CTL7_COC_CTRL7_4_3		0x18
+#define MSK_COC_CTL7_COC_CTRL7_2_0		0x07
+
+/* CoC 10th Ctl, default value: 0x00 */
+#define REG_COC_CTL9				0x0719
+
+/* CoC 11th Ctl, default value: 0x00 */
+#define REG_COC_CTLA				0x071a
+
+/* CoC 12th Ctl, default value: 0x00 */
+#define REG_COC_CTLB				0x071b
+
+/* CoC 13th Ctl, default value: 0x0f */
+#define REG_COC_CTLC				0x071c
+
+/* CoC 14th Ctl, default value: 0x0a */
+#define REG_COC_CTLD				0x071d
+#define BIT_COC_CTLD_COC_CTRLD_7		BIT(7)
+#define MSK_COC_CTLD_COC_CTRLD_6_0		0x7f
+
+/* CoC 15th Ctl, default value: 0x0a */
+#define REG_COC_CTLE				0x071e
+#define BIT_COC_CTLE_COC_CTRLE_7		BIT(7)
+#define MSK_COC_CTLE_COC_CTRLE_6_0		0x7f
+
+/* CoC 16th Ctl, default value: 0x00 */
+#define REG_COC_CTLF				0x071f
+#define MSK_COC_CTLF_COC_CTRLF_7_3		0xf8
+#define MSK_COC_CTLF_COC_CTRLF_2_0		0x07
+
+/* CoC 18th Ctl, default value: 0x32 */
+#define REG_COC_CTL11				0x0721
+#define MSK_COC_CTL11_COC_CTRL11_7_4		0xf0
+#define MSK_COC_CTL11_COC_CTRL11_3_0		0x0f
+
+/* CoC 21st Ctl, default value: 0x00 */
+#define REG_COC_CTL14				0x0724
+#define MSK_COC_CTL14_COC_CTRL14_7_4		0xf0
+#define MSK_COC_CTL14_COC_CTRL14_3_0		0x0f
+
+/* CoC 22nd Ctl, default value: 0x00 */
+#define REG_COC_CTL15				0x0725
+#define BIT_COC_CTL15_COC_CTRL15_7		BIT(7)
+#define MSK_COC_CTL15_COC_CTRL15_6_4		0x70
+#define MSK_COC_CTL15_COC_CTRL15_3_0		0x0f
+
+/* CoC Interrupt, default value: 0x00 */
+#define REG_COC_INTR				0x0726
+
+/* CoC Interrupt Mask, default value: 0x00 */
+#define REG_COC_INTR_MASK			0x0727
+#define BIT_COC_PLL_LOCK_STATUS_CHANGE		BIT(0)
+#define BIT_COC_CALIBRATION_DONE		BIT(1)
+
+/* CoC Misc Ctl, default value: 0x00 */
+#define REG_COC_MISC_CTL0			0x0728
+#define BIT_COC_MISC_CTL0_FSM_MON		BIT(7)
+
+/* CoC 24th Ctl, default value: 0x00 */
+#define REG_COC_CTL17				0x072a
+#define MSK_COC_CTL17_COC_CTRL17_7_4		0xf0
+#define MSK_COC_CTL17_COC_CTRL17_3_0		0x0f
+
+/* CoC 25th Ctl, default value: 0x00 */
+#define REG_COC_CTL18				0x072b
+#define MSK_COC_CTL18_COC_CTRL18_7_4		0xf0
+#define MSK_COC_CTL18_COC_CTRL18_3_0		0x0f
+
+/* CoC 26th Ctl, default value: 0x00 */
+#define REG_COC_CTL19				0x072c
+#define MSK_COC_CTL19_COC_CTRL19_7_4		0xf0
+#define MSK_COC_CTL19_COC_CTRL19_3_0		0x0f
+
+/* CoC 27th Ctl, default value: 0x00 */
+#define REG_COC_CTL1A				0x072d
+#define MSK_COC_CTL1A_COC_CTRL1A_7_2		0xfc
+#define MSK_COC_CTL1A_COC_CTRL1A_1_0		0x03
+
+/* DoC 9th Status, default value: 0x00 */
+#define REG_DOC_STAT_8				0x0740
+
+/* DoC 10th Status, default value: 0x00 */
+#define REG_DOC_STAT_9				0x0741
+
+/* DoC 5th CFG, default value: 0x00 */
+#define REG_DOC_CFG4				0x074e
+#define MSK_DOC_CFG4_DBG_STATE_DOC_FSM		0x0f
+
+/* DoC 1st Ctl, default value: 0x40 */
+#define REG_DOC_CTL0				0x0751
+
+/* DoC 7th Ctl, default value: 0x00 */
+#define REG_DOC_CTL6				0x0757
+#define BIT_DOC_CTL6_DOC_CTRL6_7		BIT(7)
+#define BIT_DOC_CTL6_DOC_CTRL6_6		BIT(6)
+#define MSK_DOC_CTL6_DOC_CTRL6_5_4		0x30
+#define MSK_DOC_CTL6_DOC_CTRL6_3_0		0x0f
+
+/* DoC 8th Ctl, default value: 0x00 */
+#define REG_DOC_CTL7				0x0758
+#define BIT_DOC_CTL7_DOC_CTRL7_7		BIT(7)
+#define BIT_DOC_CTL7_DOC_CTRL7_6		BIT(6)
+#define BIT_DOC_CTL7_DOC_CTRL7_5		BIT(5)
+#define MSK_DOC_CTL7_DOC_CTRL7_4_3		0x18
+#define MSK_DOC_CTL7_DOC_CTRL7_2_0		0x07
+
+/* DoC 9th Ctl, default value: 0x00 */
+#define REG_DOC_CTL8				0x076c
+#define BIT_DOC_CTL8_DOC_CTRL8_7		BIT(7)
+#define MSK_DOC_CTL8_DOC_CTRL8_6_4		0x70
+#define MSK_DOC_CTL8_DOC_CTRL8_3_2		0x0c
+#define MSK_DOC_CTL8_DOC_CTRL8_1_0		0x03
+
+/* DoC 10th Ctl, default value: 0x00 */
+#define REG_DOC_CTL9				0x076d
+
+/* DoC 11th Ctl, default value: 0x00 */
+#define REG_DOC_CTLA				0x076e
+
+/* DoC 15th Ctl, default value: 0x00 */
+#define REG_DOC_CTLE				0x0772
+#define BIT_DOC_CTLE_DOC_CTRLE_7		BIT(7)
+#define BIT_DOC_CTLE_DOC_CTRLE_6		BIT(6)
+#define MSK_DOC_CTLE_DOC_CTRLE_5_4		0x30
+#define MSK_DOC_CTLE_DOC_CTRLE_3_0		0x0f
+
+/* Interrupt Mask 1st, default value: 0x00 */
+#define REG_MHL_INT_0_MASK			0x0580
+
+/* Interrupt Mask 2nd, default value: 0x00 */
+#define REG_MHL_INT_1_MASK			0x0581
+
+/* Interrupt Mask 3rd, default value: 0x00 */
+#define REG_MHL_INT_2_MASK			0x0582
+
+/* Interrupt Mask 4th, default value: 0x00 */
+#define REG_MHL_INT_3_MASK			0x0583
+
+/* MDT Receive Time Out, default value: 0x00 */
+#define REG_MDT_RCV_TIMEOUT			0x0584
+
+/* MDT Transmit Time Out, default value: 0x00 */
+#define REG_MDT_XMIT_TIMEOUT			0x0585
+
+/* MDT Receive Control, default value: 0x00 */
+#define REG_MDT_RCV_CTRL			0x0586
+#define BIT_MDT_RCV_CTRL_MDT_RCV_EN		BIT(7)
+#define BIT_MDT_RCV_CTRL_MDT_DELAY_RCV_EN	BIT(6)
+#define BIT_MDT_RCV_CTRL_MDT_RFIFO_OVER_WR_EN	BIT(4)
+#define BIT_MDT_RCV_CTRL_MDT_XFIFO_OVER_WR_EN	BIT(3)
+#define BIT_MDT_RCV_CTRL_MDT_DISABLE		BIT(2)
+#define BIT_MDT_RCV_CTRL_MDT_RFIFO_CLR_ALL	BIT(1)
+#define BIT_MDT_RCV_CTRL_MDT_RFIFO_CLR_CUR	BIT(0)
+
+/* MDT Receive Read Port, default value: 0x00 */
+#define REG_MDT_RCV_READ_PORT			0x0587
+
+/* MDT Transmit Control, default value: 0x70 */
+#define REG_MDT_XMIT_CTRL			0x0588
+#define BIT_MDT_XMIT_CTRL_EN			BIT(7)
+#define BIT_MDT_XMIT_CTRL_CMD_MERGE_EN		BIT(6)
+#define BIT_MDT_XMIT_CTRL_FIXED_BURST_LEN	BIT(5)
+#define BIT_MDT_XMIT_CTRL_FIXED_AID		BIT(4)
+#define BIT_MDT_XMIT_CTRL_SINGLE_RUN_EN		BIT(3)
+#define BIT_MDT_XMIT_CTRL_CLR_ABORT_WAIT	BIT(2)
+#define BIT_MDT_XMIT_CTRL_XFIFO_CLR_ALL		BIT(1)
+#define BIT_MDT_XMIT_CTRL_XFIFO_CLR_CUR		BIT(0)
+
+/* MDT Receive WRITE Port, default value: 0x00 */
+#define REG_MDT_XMIT_WRITE_PORT			0x0589
+
+/* MDT RFIFO Status, default value: 0x00 */
+#define REG_MDT_RFIFO_STAT			0x058a
+#define MSK_MDT_RFIFO_STAT_MDT_RFIFO_CNT	0xe0
+#define MSK_MDT_RFIFO_STAT_MDT_RFIFO_CUR_BYTE_CNT 0x1f
+
+/* MDT XFIFO Status, default value: 0x80 */
+#define REG_MDT_XFIFO_STAT			0x058b
+#define MSK_MDT_XFIFO_STAT_MDT_XFIFO_LEVEL_AVAIL 0xe0
+#define BIT_MDT_XFIFO_STAT_MDT_XMIT_PRE_HS_EN	BIT(4)
+#define MSK_MDT_XFIFO_STAT_MDT_WRITE_BURST_LEN	0x0f
+
+/* MDT Interrupt 0, default value: 0x0c */
+#define REG_MDT_INT_0				0x058c
+#define BIT_MDT_RFIFO_DATA_RDY			BIT(0)
+#define BIT_MDT_IDLE_AFTER_HAWB_DISABLE		BIT(2)
+#define BIT_MDT_XFIFO_EMPTY			BIT(3)
+
+/* MDT Interrupt 0 Mask, default value: 0x00 */
+#define REG_MDT_INT_0_MASK			0x058d
+
+/* MDT Interrupt 1, default value: 0x00 */
+#define REG_MDT_INT_1				0x058e
+#define BIT_MDT_RCV_TIMEOUT			BIT(0)
+#define BIT_MDT_RCV_SM_ABORT_PKT_RCVD		BIT(1)
+#define BIT_MDT_RCV_SM_ERROR			BIT(2)
+#define BIT_MDT_XMIT_TIMEOUT			BIT(5)
+#define BIT_MDT_XMIT_SM_ABORT_PKT_RCVD		BIT(6)
+#define BIT_MDT_XMIT_SM_ERROR			BIT(7)
+
+/* MDT Interrupt 1 Mask, default value: 0x00 */
+#define REG_MDT_INT_1_MASK			0x058f
+
+/* CBUS Vendor ID, default value: 0x01 */
+#define REG_CBUS_VENDOR_ID			0x0590
+
+/* CBUS Connection Status, default value: 0x00 */
+#define REG_CBUS_STATUS				0x0591
+#define BIT_CBUS_STATUS_MHL_CABLE_PRESENT	BIT(4)
+#define BIT_CBUS_STATUS_MSC_HB_SUCCESS		BIT(3)
+#define BIT_CBUS_STATUS_CBUS_HPD		BIT(2)
+#define BIT_CBUS_STATUS_MHL_MODE		BIT(1)
+#define BIT_CBUS_STATUS_CBUS_CONNECTED		BIT(0)
+
+/* CBUS Interrupt 1st, default value: 0x00 */
+#define REG_CBUS_INT_0				0x0592
+#define BIT_CBUS_MSC_MT_DONE_NACK		BIT(7)
+#define BIT_CBUS_MSC_MR_SET_INT			BIT(6)
+#define BIT_CBUS_MSC_MR_WRITE_BURST		BIT(5)
+#define BIT_CBUS_MSC_MR_MSC_MSG			BIT(4)
+#define BIT_CBUS_MSC_MR_WRITE_STAT		BIT(3)
+#define BIT_CBUS_HPD_CHG			BIT(2)
+#define BIT_CBUS_MSC_MT_DONE			BIT(1)
+#define BIT_CBUS_CNX_CHG			BIT(0)
+
+/* CBUS Interrupt Mask 1st, default value: 0x00 */
+#define REG_CBUS_INT_0_MASK			0x0593
+
+/* CBUS Interrupt 2nd, default value: 0x00 */
+#define REG_CBUS_INT_1				0x0594
+#define BIT_CBUS_CMD_ABORT			BIT(6)
+#define BIT_CBUS_MSC_ABORT_RCVD			BIT(3)
+#define BIT_CBUS_DDC_ABORT			BIT(2)
+#define BIT_CBUS_CEC_ABORT			BIT(1)
+
+/* CBUS Interrupt Mask 2nd, default value: 0x00 */
+#define REG_CBUS_INT_1_MASK			0x0595
+
+/* CBUS DDC Abort Interrupt, default value: 0x00 */
+#define REG_DDC_ABORT_INT			0x0598
+
+/* CBUS DDC Abort Interrupt Mask, default value: 0x00 */
+#define REG_DDC_ABORT_INT_MASK			0x0599
+
+/* CBUS MSC Requester Abort Interrupt, default value: 0x00 */
+#define REG_MSC_MT_ABORT_INT			0x059a
+
+/* CBUS MSC Requester Abort Interrupt Mask, default value: 0x00 */
+#define REG_MSC_MT_ABORT_INT_MASK		0x059b
+
+/* CBUS MSC Responder Abort Interrupt, default value: 0x00 */
+#define REG_MSC_MR_ABORT_INT			0x059c
+
+/* CBUS MSC Responder Abort Interrupt Mask, default value: 0x00 */
+#define REG_MSC_MR_ABORT_INT_MASK		0x059d
+
+/* CBUS RX DISCOVERY interrupt, default value: 0x00 */
+#define REG_CBUS_RX_DISC_INT0			0x059e
+
+/* CBUS RX DISCOVERY Interrupt Mask, default value: 0x00 */
+#define REG_CBUS_RX_DISC_INT0_MASK		0x059f
+
+/* CBUS_Link_Layer Control #8, default value: 0x00 */
+#define REG_CBUS_LINK_CTRL_8			0x05a7
+
+/* MDT State Machine Status, default value: 0x00 */
+#define REG_MDT_SM_STAT				0x05b5
+#define MSK_MDT_SM_STAT_MDT_RCV_STATE		0xf0
+#define MSK_MDT_SM_STAT_MDT_XMIT_STATE		0x0f
+
+/* CBUS MSC command trigger, default value: 0x00 */
+#define REG_MSC_COMMAND_START			0x05b8
+#define BIT_MSC_COMMAND_START_DEBUG		BIT(5)
+#define BIT_MSC_COMMAND_START_WRITE_BURST	BIT(4)
+#define BIT_MSC_COMMAND_START_WRITE_STAT	BIT(3)
+#define BIT_MSC_COMMAND_START_READ_DEVCAP	BIT(2)
+#define BIT_MSC_COMMAND_START_MSC_MSG		BIT(1)
+#define BIT_MSC_COMMAND_START_PEER		BIT(0)
+
+/* CBUS MSC Command/Offset, default value: 0x00 */
+#define REG_MSC_CMD_OR_OFFSET			0x05b9
+
+/* CBUS MSC Transmit Data */
+#define REG_MSC_1ST_TRANSMIT_DATA		0x05ba
+#define REG_MSC_2ND_TRANSMIT_DATA		0x05bb
+
+/* CBUS MSC Requester Received Data */
+#define REG_MSC_MT_RCVD_DATA0			0x05bc
+#define REG_MSC_MT_RCVD_DATA1			0x05bd
+
+/* CBUS MSC Responder MSC_MSG Received Data */
+#define REG_MSC_MR_MSC_MSG_RCVD_1ST_DATA	0x05bf
+#define REG_MSC_MR_MSC_MSG_RCVD_2ND_DATA	0x05c0
+
+/* CBUS MSC Heartbeat Control, default value: 0x27 */
+#define REG_MSC_HEARTBEAT_CTRL			0x05c4
+#define BIT_MSC_HEARTBEAT_CTRL_MSC_HB_EN	BIT(7)
+#define MSK_MSC_HEARTBEAT_CTRL_MSC_HB_FAIL_LIMIT 0x70
+#define MSK_MSC_HEARTBEAT_CTRL_MSC_HB_PERIOD_MSB 0x0f
+
+/* CBUS MSC Compatibility Control, default value: 0x02 */
+#define REG_CBUS_MSC_COMPAT_CTRL		0x05c7
+#define BIT_CBUS_MSC_COMPAT_CTRL_XDEVCAP_EN	BIT(7)
+#define BIT_CBUS_MSC_COMPAT_CTRL_DISABLE_MSC_ON_CBUS BIT(6)
+#define BIT_CBUS_MSC_COMPAT_CTRL_DISABLE_DDC_ON_CBUS BIT(5)
+#define BIT_CBUS_MSC_COMPAT_CTRL_DISABLE_GET_DDC_ERRORCODE BIT(3)
+#define BIT_CBUS_MSC_COMPAT_CTRL_DISABLE_GET_VS1_ERRORCODE BIT(2)
+
+/* CBUS3 Converter Control, default value: 0x24 */
+#define REG_CBUS3_CNVT				0x05dc
+#define MSK_CBUS3_CNVT_CBUS3_RETRYLMT		0xf0
+#define MSK_CBUS3_CNVT_CBUS3_PEERTOUT_SEL	0x0c
+#define BIT_CBUS3_CNVT_TEARCBUS_EN		BIT(1)
+#define BIT_CBUS3_CNVT_CBUS3CNVT_EN		BIT(0)
+
+/* Discovery Control1, default value: 0x24 */
+#define REG_DISC_CTRL1				0x05e0
+#define BIT_DISC_CTRL1_CBUS_INTR_EN		BIT(7)
+#define BIT_DISC_CTRL1_HB_ONLY			BIT(6)
+#define MSK_DISC_CTRL1_DISC_ATT			0x30
+#define MSK_DISC_CTRL1_DISC_CYC			0x0c
+#define BIT_DISC_CTRL1_DISC_EN			BIT(0)
+
+#define VAL_PUP_OFF				0
+#define VAL_PUP_20K				1
+#define VAL_PUP_5K				2
+
+/* Discovery Control4, default value: 0x80 */
+#define REG_DISC_CTRL4				0x05e3
+#define MSK_DISC_CTRL4_CBUSDISC_PUP_SEL		0xc0
+#define MSK_DISC_CTRL4_CBUSIDLE_PUP_SEL		0x30
+#define VAL_DISC_CTRL4(pup_disc, pup_idle) (((pup_disc) << 6) | (pup_idle << 4))
+
+/* Discovery Control5, default value: 0x03 */
+#define REG_DISC_CTRL5				0x05e4
+#define BIT_DISC_CTRL5_DSM_OVRIDE		BIT(3)
+#define MSK_DISC_CTRL5_CBUSMHL_PUP_SEL		0x03
+
+/* Discovery Control8, default value: 0x81 */
+#define REG_DISC_CTRL8				0x05e7
+#define BIT_DISC_CTRL8_NOMHLINT_CLR_BYPASS	BIT(7)
+#define BIT_DISC_CTRL8_DELAY_CBUS_INTR_EN	BIT(0)
+
+/* Discovery Control9, default value: 0x54 */
+#define REG_DISC_CTRL9			0x05e8
+#define BIT_DISC_CTRL9_MHL3_RSEN_BYP		BIT(7)
+#define BIT_DISC_CTRL9_MHL3DISC_EN		BIT(6)
+#define BIT_DISC_CTRL9_WAKE_DRVFLT		BIT(4)
+#define BIT_DISC_CTRL9_NOMHL_EST		BIT(3)
+#define BIT_DISC_CTRL9_DISC_PULSE_PROCEED	BIT(2)
+#define BIT_DISC_CTRL9_WAKE_PULSE_BYPASS	BIT(1)
+#define BIT_DISC_CTRL9_VBUS_OUTPUT_CAPABILITY_SRC BIT(0)
+
+/* Discovery Status1, default value: 0x00 */
+#define REG_DISC_STAT1				0x05eb
+#define BIT_DISC_STAT1_PSM_OVRIDE		BIT(5)
+#define MSK_DISC_STAT1_DISC_SM			0x0f
+
+/* Discovery Status2, default value: 0x00 */
+#define REG_DISC_STAT2				0x05ec
+#define BIT_DISC_STAT2_CBUS_OE_POL		BIT(6)
+#define BIT_DISC_STAT2_CBUS_SATUS		BIT(5)
+#define BIT_DISC_STAT2_RSEN			BIT(4)
+
+#define MSK_DISC_STAT2_MHL_VRSN			0x0c
+#define VAL_DISC_STAT2_DEFAULT			0x00
+#define VAL_DISC_STAT2_MHL1_2			0x04
+#define VAL_DISC_STAT2_MHL3			0x08
+#define VAL_DISC_STAT2_RESERVED			0x0c
+
+#define MSK_DISC_STAT2_RGND			0x03
+#define VAL_RGND_OPEN				0x00
+#define VAL_RGND_2K				0x01
+#define VAL_RGND_1K				0x02
+#define VAL_RGND_SHORT				0x03
+
+/* Interrupt CBUS_reg1 INTR0, default value: 0x00 */
+#define REG_CBUS_DISC_INTR0			0x05ed
+#define BIT_RGND_READY_INT			BIT(6)
+#define BIT_CBUS_MHL12_DISCON_INT		BIT(5)
+#define BIT_CBUS_MHL3_DISCON_INT		BIT(4)
+#define BIT_NOT_MHL_EST_INT			BIT(3)
+#define BIT_MHL_EST_INT				BIT(2)
+#define BIT_MHL3_EST_INT			BIT(1)
+#define VAL_CBUS_MHL_DISCON (BIT_CBUS_MHL12_DISCON_INT \
+			    | BIT_CBUS_MHL3_DISCON_INT \
+			    | BIT_NOT_MHL_EST_INT)
+
+/* Interrupt CBUS_reg1 INTR0 Mask, default value: 0x00 */
+#define REG_CBUS_DISC_INTR0_MASK		0x05ee
+
+#endif /* __SIL_SII8620_H__ */
diff --git a/drivers/gpu/drm/bridge/synopsys/Kconfig b/drivers/gpu/drm/bridge/synopsys/Kconfig
new file mode 100644
index 000000000..3cc53b441
--- /dev/null
+++ b/drivers/gpu/drm/bridge/synopsys/Kconfig
@@ -0,0 +1,40 @@
+config DRM_DW_HDMI
+	tristate
+	select DRM_KMS_HELPER
+	select REGMAP_MMIO
+	select CEC_CORE if CEC_NOTIFIER
+
+config DRM_DW_HDMI_AHB_AUDIO
+	tristate "Synopsys Designware AHB Audio interface"
+	depends on DRM_DW_HDMI && SND
+	select SND_PCM
+	select SND_PCM_ELD
+	select SND_PCM_IEC958
+	help
+	  Support the AHB Audio interface which is part of the Synopsys
+	  Designware HDMI block.  This is used in conjunction with
+	  the i.MX6 HDMI driver.
+
+config DRM_DW_HDMI_I2S_AUDIO
+	tristate "Synopsys Designware I2S Audio interface"
+	depends on SND_SOC
+	depends on DRM_DW_HDMI
+	select SND_SOC_HDMI_CODEC
+	help
+	  Support the I2S Audio interface which is part of the Synopsys
+	  Designware HDMI block.
+
+config DRM_DW_HDMI_CEC
+	tristate "Synopsis Designware CEC interface"
+	depends on DRM_DW_HDMI
+	select CEC_CORE
+	select CEC_NOTIFIER
+	help
+	  Support the CE interface which is part of the Synopsys
+	  Designware HDMI block.
+
+config DRM_DW_MIPI_DSI
+	tristate
+	select DRM_KMS_HELPER
+	select DRM_MIPI_DSI
+	select DRM_PANEL_BRIDGE
diff --git a/drivers/gpu/drm/bridge/synopsys/Makefile b/drivers/gpu/drm/bridge/synopsys/Makefile
new file mode 100644
index 000000000..5dad97d92
--- /dev/null
+++ b/drivers/gpu/drm/bridge/synopsys/Makefile
@@ -0,0 +1,8 @@
+#ccflags-y := -Iinclude/drm
+
+obj-$(CONFIG_DRM_DW_HDMI) += dw-hdmi.o
+obj-$(CONFIG_DRM_DW_HDMI_AHB_AUDIO) += dw-hdmi-ahb-audio.o
+obj-$(CONFIG_DRM_DW_HDMI_I2S_AUDIO) += dw-hdmi-i2s-audio.o
+obj-$(CONFIG_DRM_DW_HDMI_CEC) += dw-hdmi-cec.o
+
+obj-$(CONFIG_DRM_DW_MIPI_DSI) += dw-mipi-dsi.o
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-ahb-audio.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-ahb-audio.c
new file mode 100644
index 000000000..cf3f0caf9
--- /dev/null
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-ahb-audio.c
@@ -0,0 +1,652 @@
+/*
+ * DesignWare HDMI audio driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Written and tested against the Designware HDMI Tx found in iMX6.
+ */
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <drm/bridge/dw_hdmi.h>
+#include <drm/drm_edid.h>
+
+#include <sound/asoundef.h>
+#include <sound/core.h>
+#include <sound/initval.h>
+#include <sound/pcm.h>
+#include <sound/pcm_drm_eld.h>
+#include <sound/pcm_iec958.h>
+
+#include "dw-hdmi-audio.h"
+
+#define DRIVER_NAME "dw-hdmi-ahb-audio"
+
+/* Provide some bits rather than bit offsets */
+enum {
+	HDMI_AHB_DMA_CONF0_SW_FIFO_RST = BIT(7),
+	HDMI_AHB_DMA_CONF0_EN_HLOCK = BIT(3),
+	HDMI_AHB_DMA_START_START = BIT(0),
+	HDMI_AHB_DMA_STOP_STOP = BIT(0),
+	HDMI_IH_MUTE_AHBDMAAUD_STAT0_ERROR = BIT(5),
+	HDMI_IH_MUTE_AHBDMAAUD_STAT0_LOST = BIT(4),
+	HDMI_IH_MUTE_AHBDMAAUD_STAT0_RETRY = BIT(3),
+	HDMI_IH_MUTE_AHBDMAAUD_STAT0_DONE = BIT(2),
+	HDMI_IH_MUTE_AHBDMAAUD_STAT0_BUFFFULL = BIT(1),
+	HDMI_IH_MUTE_AHBDMAAUD_STAT0_BUFFEMPTY = BIT(0),
+	HDMI_IH_MUTE_AHBDMAAUD_STAT0_ALL =
+		HDMI_IH_MUTE_AHBDMAAUD_STAT0_ERROR |
+		HDMI_IH_MUTE_AHBDMAAUD_STAT0_LOST |
+		HDMI_IH_MUTE_AHBDMAAUD_STAT0_RETRY |
+		HDMI_IH_MUTE_AHBDMAAUD_STAT0_DONE |
+		HDMI_IH_MUTE_AHBDMAAUD_STAT0_BUFFFULL |
+		HDMI_IH_MUTE_AHBDMAAUD_STAT0_BUFFEMPTY,
+	HDMI_IH_AHBDMAAUD_STAT0_ERROR = BIT(5),
+	HDMI_IH_AHBDMAAUD_STAT0_LOST = BIT(4),
+	HDMI_IH_AHBDMAAUD_STAT0_RETRY = BIT(3),
+	HDMI_IH_AHBDMAAUD_STAT0_DONE = BIT(2),
+	HDMI_IH_AHBDMAAUD_STAT0_BUFFFULL = BIT(1),
+	HDMI_IH_AHBDMAAUD_STAT0_BUFFEMPTY = BIT(0),
+	HDMI_IH_AHBDMAAUD_STAT0_ALL =
+		HDMI_IH_AHBDMAAUD_STAT0_ERROR |
+		HDMI_IH_AHBDMAAUD_STAT0_LOST |
+		HDMI_IH_AHBDMAAUD_STAT0_RETRY |
+		HDMI_IH_AHBDMAAUD_STAT0_DONE |
+		HDMI_IH_AHBDMAAUD_STAT0_BUFFFULL |
+		HDMI_IH_AHBDMAAUD_STAT0_BUFFEMPTY,
+	HDMI_AHB_DMA_CONF0_INCR16 = 2 << 1,
+	HDMI_AHB_DMA_CONF0_INCR8 = 1 << 1,
+	HDMI_AHB_DMA_CONF0_INCR4 = 0,
+	HDMI_AHB_DMA_CONF0_BURST_MODE = BIT(0),
+	HDMI_AHB_DMA_MASK_DONE = BIT(7),
+
+	HDMI_REVISION_ID = 0x0001,
+	HDMI_IH_AHBDMAAUD_STAT0 = 0x0109,
+	HDMI_IH_MUTE_AHBDMAAUD_STAT0 = 0x0189,
+	HDMI_FC_AUDICONF2 = 0x1027,
+	HDMI_FC_AUDSCONF = 0x1063,
+	HDMI_FC_AUDSCONF_LAYOUT1 = 1 << 0,
+	HDMI_FC_AUDSCONF_LAYOUT0 = 0 << 0,
+	HDMI_AHB_DMA_CONF0 = 0x3600,
+	HDMI_AHB_DMA_START = 0x3601,
+	HDMI_AHB_DMA_STOP = 0x3602,
+	HDMI_AHB_DMA_THRSLD = 0x3603,
+	HDMI_AHB_DMA_STRADDR0 = 0x3604,
+	HDMI_AHB_DMA_STPADDR0 = 0x3608,
+	HDMI_AHB_DMA_MASK = 0x3614,
+	HDMI_AHB_DMA_POL = 0x3615,
+	HDMI_AHB_DMA_CONF1 = 0x3616,
+	HDMI_AHB_DMA_BUFFPOL = 0x361a,
+};
+
+struct dw_hdmi_channel_conf {
+	u8 conf1;
+	u8 ca;
+};
+
+/*
+ * The default mapping of ALSA channels to HDMI channels and speaker
+ * allocation bits.  Note that we can't do channel remapping here -
+ * channels must be in the same order.
+ *
+ * Mappings for alsa-lib pcm/surround*.conf files:
+ *
+ *		Front	Sur4.0	Sur4.1	Sur5.0	Sur5.1	Sur7.1
+ * Channels	2	4	6	6	6	8
+ *
+ * Our mapping from ALSA channel to CEA686D speaker name and HDMI channel:
+ *
+ *				Number of ALSA channels
+ * ALSA Channel	2	3	4	5	6	7	8
+ * 0		FL:0	=	=	=	=	=	=
+ * 1		FR:1	=	=	=	=	=	=
+ * 2			FC:3	RL:4	LFE:2	=	=	=
+ * 3				RR:5	RL:4	FC:3	=	=
+ * 4					RR:5	RL:4	=	=
+ * 5						RR:5	=	=
+ * 6							RC:6	=
+ * 7							RLC/FRC	RLC/FRC
+ */
+static struct dw_hdmi_channel_conf default_hdmi_channel_config[7] = {
+	{ 0x03, 0x00 },	/* FL,FR */
+	{ 0x0b, 0x02 },	/* FL,FR,FC */
+	{ 0x33, 0x08 },	/* FL,FR,RL,RR */
+	{ 0x37, 0x09 },	/* FL,FR,LFE,RL,RR */
+	{ 0x3f, 0x0b },	/* FL,FR,LFE,FC,RL,RR */
+	{ 0x7f, 0x0f },	/* FL,FR,LFE,FC,RL,RR,RC */
+	{ 0xff, 0x13 },	/* FL,FR,LFE,FC,RL,RR,[FR]RC,[FR]LC */
+};
+
+struct snd_dw_hdmi {
+	struct snd_card *card;
+	struct snd_pcm *pcm;
+	spinlock_t lock;
+	struct dw_hdmi_audio_data data;
+	struct snd_pcm_substream *substream;
+	void (*reformat)(struct snd_dw_hdmi *, size_t, size_t);
+	void *buf_src;
+	void *buf_dst;
+	dma_addr_t buf_addr;
+	unsigned buf_offset;
+	unsigned buf_period;
+	unsigned buf_size;
+	unsigned channels;
+	u8 revision;
+	u8 iec_offset;
+	u8 cs[192][8];
+};
+
+static void dw_hdmi_writel(u32 val, void __iomem *ptr)
+{
+	writeb_relaxed(val, ptr);
+	writeb_relaxed(val >> 8, ptr + 1);
+	writeb_relaxed(val >> 16, ptr + 2);
+	writeb_relaxed(val >> 24, ptr + 3);
+}
+
+/*
+ * Convert to hardware format: The userspace buffer contains IEC958 samples,
+ * with the PCUV bits in bits 31..28 and audio samples in bits 27..4.  We
+ * need these to be in bits 27..24, with the IEC B bit in bit 28, and audio
+ * samples in 23..0.
+ *
+ * Default preamble in bits 3..0: 8 = block start, 4 = even 2 = odd
+ *
+ * Ideally, we could do with having the data properly formatted in userspace.
+ */
+static void dw_hdmi_reformat_iec958(struct snd_dw_hdmi *dw,
+	size_t offset, size_t bytes)
+{
+	u32 *src = dw->buf_src + offset;
+	u32 *dst = dw->buf_dst + offset;
+	u32 *end = dw->buf_src + offset + bytes;
+
+	do {
+		u32 b, sample = *src++;
+
+		b = (sample & 8) << (28 - 3);
+
+		sample >>= 4;
+
+		*dst++ = sample | b;
+	} while (src < end);
+}
+
+static u32 parity(u32 sample)
+{
+	sample ^= sample >> 16;
+	sample ^= sample >> 8;
+	sample ^= sample >> 4;
+	sample ^= sample >> 2;
+	sample ^= sample >> 1;
+	return (sample & 1) << 27;
+}
+
+static void dw_hdmi_reformat_s24(struct snd_dw_hdmi *dw,
+	size_t offset, size_t bytes)
+{
+	u32 *src = dw->buf_src + offset;
+	u32 *dst = dw->buf_dst + offset;
+	u32 *end = dw->buf_src + offset + bytes;
+
+	do {
+		unsigned i;
+		u8 *cs;
+
+		cs = dw->cs[dw->iec_offset++];
+		if (dw->iec_offset >= 192)
+			dw->iec_offset = 0;
+
+		i = dw->channels;
+		do {
+			u32 sample = *src++;
+
+			sample &= ~0xff000000;
+			sample |= *cs++ << 24;
+			sample |= parity(sample & ~0xf8000000);
+
+			*dst++ = sample;
+		} while (--i);
+	} while (src < end);
+}
+
+static void dw_hdmi_create_cs(struct snd_dw_hdmi *dw,
+	struct snd_pcm_runtime *runtime)
+{
+	u8 cs[4];
+	unsigned ch, i, j;
+
+	snd_pcm_create_iec958_consumer(runtime, cs, sizeof(cs));
+
+	memset(dw->cs, 0, sizeof(dw->cs));
+
+	for (ch = 0; ch < 8; ch++) {
+		cs[2] &= ~IEC958_AES2_CON_CHANNEL;
+		cs[2] |= (ch + 1) << 4;
+
+		for (i = 0; i < ARRAY_SIZE(cs); i++) {
+			unsigned c = cs[i];
+
+			for (j = 0; j < 8; j++, c >>= 1)
+				dw->cs[i * 8 + j][ch] = (c & 1) << 2;
+		}
+	}
+	dw->cs[0][0] |= BIT(4);
+}
+
+static void dw_hdmi_start_dma(struct snd_dw_hdmi *dw)
+{
+	void __iomem *base = dw->data.base;
+	unsigned offset = dw->buf_offset;
+	unsigned period = dw->buf_period;
+	u32 start, stop;
+
+	dw->reformat(dw, offset, period);
+
+	/* Clear all irqs before enabling irqs and starting DMA */
+	writeb_relaxed(HDMI_IH_AHBDMAAUD_STAT0_ALL,
+		       base + HDMI_IH_AHBDMAAUD_STAT0);
+
+	start = dw->buf_addr + offset;
+	stop = start + period - 1;
+
+	/* Setup the hardware start/stop addresses */
+	dw_hdmi_writel(start, base + HDMI_AHB_DMA_STRADDR0);
+	dw_hdmi_writel(stop, base + HDMI_AHB_DMA_STPADDR0);
+
+	writeb_relaxed((u8)~HDMI_AHB_DMA_MASK_DONE, base + HDMI_AHB_DMA_MASK);
+	writeb(HDMI_AHB_DMA_START_START, base + HDMI_AHB_DMA_START);
+
+	offset += period;
+	if (offset >= dw->buf_size)
+		offset = 0;
+	dw->buf_offset = offset;
+}
+
+static void dw_hdmi_stop_dma(struct snd_dw_hdmi *dw)
+{
+	/* Disable interrupts before disabling DMA */
+	writeb_relaxed(~0, dw->data.base + HDMI_AHB_DMA_MASK);
+	writeb_relaxed(HDMI_AHB_DMA_STOP_STOP, dw->data.base + HDMI_AHB_DMA_STOP);
+}
+
+static irqreturn_t snd_dw_hdmi_irq(int irq, void *data)
+{
+	struct snd_dw_hdmi *dw = data;
+	struct snd_pcm_substream *substream;
+	unsigned stat;
+
+	stat = readb_relaxed(dw->data.base + HDMI_IH_AHBDMAAUD_STAT0);
+	if (!stat)
+		return IRQ_NONE;
+
+	writeb_relaxed(stat, dw->data.base + HDMI_IH_AHBDMAAUD_STAT0);
+
+	substream = dw->substream;
+	if (stat & HDMI_IH_AHBDMAAUD_STAT0_DONE && substream) {
+		snd_pcm_period_elapsed(substream);
+
+		spin_lock(&dw->lock);
+		if (dw->substream)
+			dw_hdmi_start_dma(dw);
+		spin_unlock(&dw->lock);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static struct snd_pcm_hardware dw_hdmi_hw = {
+	.info = SNDRV_PCM_INFO_INTERLEAVED |
+		SNDRV_PCM_INFO_BLOCK_TRANSFER |
+		SNDRV_PCM_INFO_MMAP |
+		SNDRV_PCM_INFO_MMAP_VALID,
+	.formats = SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE |
+		   SNDRV_PCM_FMTBIT_S24_LE,
+	.rates = SNDRV_PCM_RATE_32000 |
+		 SNDRV_PCM_RATE_44100 |
+		 SNDRV_PCM_RATE_48000 |
+		 SNDRV_PCM_RATE_88200 |
+		 SNDRV_PCM_RATE_96000 |
+		 SNDRV_PCM_RATE_176400 |
+		 SNDRV_PCM_RATE_192000,
+	.channels_min = 2,
+	.channels_max = 8,
+	.buffer_bytes_max = 1024 * 1024,
+	.period_bytes_min = 256,
+	.period_bytes_max = 8192,	/* ERR004323: must limit to 8k */
+	.periods_min = 2,
+	.periods_max = 16,
+	.fifo_size = 0,
+};
+
+static int dw_hdmi_open(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct snd_dw_hdmi *dw = substream->private_data;
+	void __iomem *base = dw->data.base;
+	int ret;
+
+	runtime->hw = dw_hdmi_hw;
+
+	ret = snd_pcm_hw_constraint_eld(runtime, dw->data.eld);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_pcm_limit_hw_rates(runtime);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_pcm_hw_constraint_integer(runtime,
+					    SNDRV_PCM_HW_PARAM_PERIODS);
+	if (ret < 0)
+		return ret;
+
+	/* Limit the buffer size to the size of the preallocated buffer */
+	ret = snd_pcm_hw_constraint_minmax(runtime,
+					   SNDRV_PCM_HW_PARAM_BUFFER_SIZE,
+					   0, substream->dma_buffer.bytes);
+	if (ret < 0)
+		return ret;
+
+	/* Clear FIFO */
+	writeb_relaxed(HDMI_AHB_DMA_CONF0_SW_FIFO_RST,
+		       base + HDMI_AHB_DMA_CONF0);
+
+	/* Configure interrupt polarities */
+	writeb_relaxed(~0, base + HDMI_AHB_DMA_POL);
+	writeb_relaxed(~0, base + HDMI_AHB_DMA_BUFFPOL);
+
+	/* Keep interrupts masked, and clear any pending */
+	writeb_relaxed(~0, base + HDMI_AHB_DMA_MASK);
+	writeb_relaxed(~0, base + HDMI_IH_AHBDMAAUD_STAT0);
+
+	ret = request_irq(dw->data.irq, snd_dw_hdmi_irq, IRQF_SHARED,
+			  "dw-hdmi-audio", dw);
+	if (ret)
+		return ret;
+
+	/* Un-mute done interrupt */
+	writeb_relaxed(HDMI_IH_MUTE_AHBDMAAUD_STAT0_ALL &
+		       ~HDMI_IH_MUTE_AHBDMAAUD_STAT0_DONE,
+		       base + HDMI_IH_MUTE_AHBDMAAUD_STAT0);
+
+	return 0;
+}
+
+static int dw_hdmi_close(struct snd_pcm_substream *substream)
+{
+	struct snd_dw_hdmi *dw = substream->private_data;
+
+	/* Mute all interrupts */
+	writeb_relaxed(HDMI_IH_MUTE_AHBDMAAUD_STAT0_ALL,
+		       dw->data.base + HDMI_IH_MUTE_AHBDMAAUD_STAT0);
+
+	free_irq(dw->data.irq, dw);
+
+	return 0;
+}
+
+static int dw_hdmi_hw_free(struct snd_pcm_substream *substream)
+{
+	return snd_pcm_lib_free_vmalloc_buffer(substream);
+}
+
+static int dw_hdmi_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
+{
+	/* Allocate the PCM runtime buffer, which is exposed to userspace. */
+	return snd_pcm_lib_alloc_vmalloc_buffer(substream,
+						params_buffer_bytes(params));
+}
+
+static int dw_hdmi_prepare(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct snd_dw_hdmi *dw = substream->private_data;
+	u8 threshold, conf0, conf1, layout, ca;
+
+	/* Setup as per 3.0.5 FSL 4.1.0 BSP */
+	switch (dw->revision) {
+	case 0x0a:
+		conf0 = HDMI_AHB_DMA_CONF0_BURST_MODE |
+			HDMI_AHB_DMA_CONF0_INCR4;
+		if (runtime->channels == 2)
+			threshold = 126;
+		else
+			threshold = 124;
+		break;
+	case 0x1a:
+		conf0 = HDMI_AHB_DMA_CONF0_BURST_MODE |
+			HDMI_AHB_DMA_CONF0_INCR8;
+		threshold = 128;
+		break;
+	default:
+		/* NOTREACHED */
+		return -EINVAL;
+	}
+
+	dw_hdmi_set_sample_rate(dw->data.hdmi, runtime->rate);
+
+	/* Minimum number of bytes in the fifo. */
+	runtime->hw.fifo_size = threshold * 32;
+
+	conf0 |= HDMI_AHB_DMA_CONF0_EN_HLOCK;
+	conf1 = default_hdmi_channel_config[runtime->channels - 2].conf1;
+	ca = default_hdmi_channel_config[runtime->channels - 2].ca;
+
+	/*
+	 * For >2 channel PCM audio, we need to select layout 1
+	 * and set an appropriate channel map.
+	 */
+	if (runtime->channels > 2)
+		layout = HDMI_FC_AUDSCONF_LAYOUT1;
+	else
+		layout = HDMI_FC_AUDSCONF_LAYOUT0;
+
+	writeb_relaxed(threshold, dw->data.base + HDMI_AHB_DMA_THRSLD);
+	writeb_relaxed(conf0, dw->data.base + HDMI_AHB_DMA_CONF0);
+	writeb_relaxed(conf1, dw->data.base + HDMI_AHB_DMA_CONF1);
+	writeb_relaxed(layout, dw->data.base + HDMI_FC_AUDSCONF);
+	writeb_relaxed(ca, dw->data.base + HDMI_FC_AUDICONF2);
+
+	switch (runtime->format) {
+	case SNDRV_PCM_FORMAT_IEC958_SUBFRAME_LE:
+		dw->reformat = dw_hdmi_reformat_iec958;
+		break;
+	case SNDRV_PCM_FORMAT_S24_LE:
+		dw_hdmi_create_cs(dw, runtime);
+		dw->reformat = dw_hdmi_reformat_s24;
+		break;
+	}
+	dw->iec_offset = 0;
+	dw->channels = runtime->channels;
+	dw->buf_src  = runtime->dma_area;
+	dw->buf_dst  = substream->dma_buffer.area;
+	dw->buf_addr = substream->dma_buffer.addr;
+	dw->buf_period = snd_pcm_lib_period_bytes(substream);
+	dw->buf_size = snd_pcm_lib_buffer_bytes(substream);
+
+	return 0;
+}
+
+static int dw_hdmi_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+	struct snd_dw_hdmi *dw = substream->private_data;
+	unsigned long flags;
+	int ret = 0;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+		spin_lock_irqsave(&dw->lock, flags);
+		dw->buf_offset = 0;
+		dw->substream = substream;
+		dw_hdmi_start_dma(dw);
+		dw_hdmi_audio_enable(dw->data.hdmi);
+		spin_unlock_irqrestore(&dw->lock, flags);
+		substream->runtime->delay = substream->runtime->period_size;
+		break;
+
+	case SNDRV_PCM_TRIGGER_STOP:
+		spin_lock_irqsave(&dw->lock, flags);
+		dw->substream = NULL;
+		dw_hdmi_stop_dma(dw);
+		dw_hdmi_audio_disable(dw->data.hdmi);
+		spin_unlock_irqrestore(&dw->lock, flags);
+		break;
+
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+static snd_pcm_uframes_t dw_hdmi_pointer(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct snd_dw_hdmi *dw = substream->private_data;
+
+	/*
+	 * We are unable to report the exact hardware position as
+	 * reading the 32-bit DMA position using 8-bit reads is racy.
+	 */
+	return bytes_to_frames(runtime, dw->buf_offset);
+}
+
+static const struct snd_pcm_ops snd_dw_hdmi_ops = {
+	.open = dw_hdmi_open,
+	.close = dw_hdmi_close,
+	.ioctl = snd_pcm_lib_ioctl,
+	.hw_params = dw_hdmi_hw_params,
+	.hw_free = dw_hdmi_hw_free,
+	.prepare = dw_hdmi_prepare,
+	.trigger = dw_hdmi_trigger,
+	.pointer = dw_hdmi_pointer,
+	.page = snd_pcm_lib_get_vmalloc_page,
+};
+
+static int snd_dw_hdmi_probe(struct platform_device *pdev)
+{
+	const struct dw_hdmi_audio_data *data = pdev->dev.platform_data;
+	struct device *dev = pdev->dev.parent;
+	struct snd_dw_hdmi *dw;
+	struct snd_card *card;
+	struct snd_pcm *pcm;
+	unsigned revision;
+	int ret;
+
+	writeb_relaxed(HDMI_IH_MUTE_AHBDMAAUD_STAT0_ALL,
+		       data->base + HDMI_IH_MUTE_AHBDMAAUD_STAT0);
+	revision = readb_relaxed(data->base + HDMI_REVISION_ID);
+	if (revision != 0x0a && revision != 0x1a) {
+		dev_err(dev, "dw-hdmi-audio: unknown revision 0x%02x\n",
+			revision);
+		return -ENXIO;
+	}
+
+	ret = snd_card_new(dev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1,
+			      THIS_MODULE, sizeof(struct snd_dw_hdmi), &card);
+	if (ret < 0)
+		return ret;
+
+	strlcpy(card->driver, DRIVER_NAME, sizeof(card->driver));
+	strlcpy(card->shortname, "DW-HDMI", sizeof(card->shortname));
+	snprintf(card->longname, sizeof(card->longname),
+		 "%s rev 0x%02x, irq %d", card->shortname, revision,
+		 data->irq);
+
+	dw = card->private_data;
+	dw->card = card;
+	dw->data = *data;
+	dw->revision = revision;
+
+	spin_lock_init(&dw->lock);
+
+	ret = snd_pcm_new(card, "DW HDMI", 0, 1, 0, &pcm);
+	if (ret < 0)
+		goto err;
+
+	dw->pcm = pcm;
+	pcm->private_data = dw;
+	strlcpy(pcm->name, DRIVER_NAME, sizeof(pcm->name));
+	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &snd_dw_hdmi_ops);
+
+	/*
+	 * To support 8-channel 96kHz audio reliably, we need 512k
+	 * to satisfy alsa with our restricted period (ERR004323).
+	 */
+	snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV,
+			dev, 128 * 1024, 1024 * 1024);
+
+	ret = snd_card_register(card);
+	if (ret < 0)
+		goto err;
+
+	platform_set_drvdata(pdev, dw);
+
+	return 0;
+
+err:
+	snd_card_free(card);
+	return ret;
+}
+
+static int snd_dw_hdmi_remove(struct platform_device *pdev)
+{
+	struct snd_dw_hdmi *dw = platform_get_drvdata(pdev);
+
+	snd_card_free(dw->card);
+
+	return 0;
+}
+
+#if defined(CONFIG_PM_SLEEP) && defined(IS_NOT_BROKEN)
+/*
+ * This code is fine, but requires implementation in the dw_hdmi_trigger()
+ * method which is currently missing as I have no way to test this.
+ */
+static int snd_dw_hdmi_suspend(struct device *dev)
+{
+	struct snd_dw_hdmi *dw = dev_get_drvdata(dev);
+
+	snd_power_change_state(dw->card, SNDRV_CTL_POWER_D3cold);
+	snd_pcm_suspend_all(dw->pcm);
+
+	return 0;
+}
+
+static int snd_dw_hdmi_resume(struct device *dev)
+{
+	struct snd_dw_hdmi *dw = dev_get_drvdata(dev);
+
+	snd_power_change_state(dw->card, SNDRV_CTL_POWER_D0);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(snd_dw_hdmi_pm, snd_dw_hdmi_suspend,
+			 snd_dw_hdmi_resume);
+#define PM_OPS &snd_dw_hdmi_pm
+#else
+#define PM_OPS NULL
+#endif
+
+static struct platform_driver snd_dw_hdmi_driver = {
+	.probe	= snd_dw_hdmi_probe,
+	.remove	= snd_dw_hdmi_remove,
+	.driver	= {
+		.name = DRIVER_NAME,
+		.pm = PM_OPS,
+	},
+};
+
+module_platform_driver(snd_dw_hdmi_driver);
+
+MODULE_AUTHOR("Russell King <rmk+kernel@arm.linux.org.uk>");
+MODULE_DESCRIPTION("Synopsis Designware HDMI AHB ALSA interface");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DRIVER_NAME);
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-audio.h b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-audio.h
new file mode 100644
index 000000000..63b5756f4
--- /dev/null
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-audio.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef DW_HDMI_AUDIO_H
+#define DW_HDMI_AUDIO_H
+
+struct dw_hdmi;
+
+struct dw_hdmi_audio_data {
+	phys_addr_t phys;
+	void __iomem *base;
+	int irq;
+	struct dw_hdmi *hdmi;
+	u8 *eld;
+};
+
+struct dw_hdmi_i2s_audio_data {
+	struct dw_hdmi *hdmi;
+
+	void (*write)(struct dw_hdmi *hdmi, u8 val, int offset);
+	u8 (*read)(struct dw_hdmi *hdmi, int offset);
+};
+
+#endif
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-cec.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-cec.c
new file mode 100644
index 000000000..6c323510f
--- /dev/null
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-cec.c
@@ -0,0 +1,327 @@
+/*
+ * Designware HDMI CEC driver
+ *
+ * Copyright (C) 2015-2017 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+
+#include <drm/drm_edid.h>
+
+#include <media/cec.h>
+#include <media/cec-notifier.h>
+
+#include "dw-hdmi-cec.h"
+
+enum {
+	HDMI_IH_CEC_STAT0	= 0x0106,
+	HDMI_IH_MUTE_CEC_STAT0	= 0x0186,
+
+	HDMI_CEC_CTRL		= 0x7d00,
+	CEC_CTRL_START		= BIT(0),
+	CEC_CTRL_FRAME_TYP	= 3 << 1,
+	CEC_CTRL_RETRY		= 0 << 1,
+	CEC_CTRL_NORMAL		= 1 << 1,
+	CEC_CTRL_IMMED		= 2 << 1,
+
+	HDMI_CEC_STAT		= 0x7d01,
+	CEC_STAT_DONE		= BIT(0),
+	CEC_STAT_EOM		= BIT(1),
+	CEC_STAT_NACK		= BIT(2),
+	CEC_STAT_ARBLOST	= BIT(3),
+	CEC_STAT_ERROR_INIT	= BIT(4),
+	CEC_STAT_ERROR_FOLL	= BIT(5),
+	CEC_STAT_WAKEUP		= BIT(6),
+
+	HDMI_CEC_MASK		= 0x7d02,
+	HDMI_CEC_POLARITY	= 0x7d03,
+	HDMI_CEC_INT		= 0x7d04,
+	HDMI_CEC_ADDR_L		= 0x7d05,
+	HDMI_CEC_ADDR_H		= 0x7d06,
+	HDMI_CEC_TX_CNT		= 0x7d07,
+	HDMI_CEC_RX_CNT		= 0x7d08,
+	HDMI_CEC_TX_DATA0	= 0x7d10,
+	HDMI_CEC_RX_DATA0	= 0x7d20,
+	HDMI_CEC_LOCK		= 0x7d30,
+	HDMI_CEC_WKUPCTRL	= 0x7d31,
+};
+
+struct dw_hdmi_cec {
+	struct dw_hdmi *hdmi;
+	const struct dw_hdmi_cec_ops *ops;
+	u32 addresses;
+	struct cec_adapter *adap;
+	struct cec_msg rx_msg;
+	unsigned int tx_status;
+	bool tx_done;
+	bool rx_done;
+	struct cec_notifier *notify;
+	int irq;
+};
+
+static void dw_hdmi_write(struct dw_hdmi_cec *cec, u8 val, int offset)
+{
+	cec->ops->write(cec->hdmi, val, offset);
+}
+
+static u8 dw_hdmi_read(struct dw_hdmi_cec *cec, int offset)
+{
+	return cec->ops->read(cec->hdmi, offset);
+}
+
+static int dw_hdmi_cec_log_addr(struct cec_adapter *adap, u8 logical_addr)
+{
+	struct dw_hdmi_cec *cec = cec_get_drvdata(adap);
+
+	if (logical_addr == CEC_LOG_ADDR_INVALID)
+		cec->addresses = 0;
+	else
+		cec->addresses |= BIT(logical_addr) | BIT(15);
+
+	dw_hdmi_write(cec, cec->addresses & 255, HDMI_CEC_ADDR_L);
+	dw_hdmi_write(cec, cec->addresses >> 8, HDMI_CEC_ADDR_H);
+
+	return 0;
+}
+
+static int dw_hdmi_cec_transmit(struct cec_adapter *adap, u8 attempts,
+				u32 signal_free_time, struct cec_msg *msg)
+{
+	struct dw_hdmi_cec *cec = cec_get_drvdata(adap);
+	unsigned int i, ctrl;
+
+	switch (signal_free_time) {
+	case CEC_SIGNAL_FREE_TIME_RETRY:
+		ctrl = CEC_CTRL_RETRY;
+		break;
+	case CEC_SIGNAL_FREE_TIME_NEW_INITIATOR:
+	default:
+		ctrl = CEC_CTRL_NORMAL;
+		break;
+	case CEC_SIGNAL_FREE_TIME_NEXT_XFER:
+		ctrl = CEC_CTRL_IMMED;
+		break;
+	}
+
+	for (i = 0; i < msg->len; i++)
+		dw_hdmi_write(cec, msg->msg[i], HDMI_CEC_TX_DATA0 + i);
+
+	dw_hdmi_write(cec, msg->len, HDMI_CEC_TX_CNT);
+	dw_hdmi_write(cec, ctrl | CEC_CTRL_START, HDMI_CEC_CTRL);
+
+	return 0;
+}
+
+static irqreturn_t dw_hdmi_cec_hardirq(int irq, void *data)
+{
+	struct cec_adapter *adap = data;
+	struct dw_hdmi_cec *cec = cec_get_drvdata(adap);
+	unsigned int stat = dw_hdmi_read(cec, HDMI_IH_CEC_STAT0);
+	irqreturn_t ret = IRQ_HANDLED;
+
+	if (stat == 0)
+		return IRQ_NONE;
+
+	dw_hdmi_write(cec, stat, HDMI_IH_CEC_STAT0);
+
+	if (stat & CEC_STAT_ERROR_INIT) {
+		cec->tx_status = CEC_TX_STATUS_ERROR;
+		cec->tx_done = true;
+		ret = IRQ_WAKE_THREAD;
+	} else if (stat & CEC_STAT_DONE) {
+		cec->tx_status = CEC_TX_STATUS_OK;
+		cec->tx_done = true;
+		ret = IRQ_WAKE_THREAD;
+	} else if (stat & CEC_STAT_NACK) {
+		cec->tx_status = CEC_TX_STATUS_NACK;
+		cec->tx_done = true;
+		ret = IRQ_WAKE_THREAD;
+	}
+
+	if (stat & CEC_STAT_EOM) {
+		unsigned int len, i;
+
+		len = dw_hdmi_read(cec, HDMI_CEC_RX_CNT);
+		if (len > sizeof(cec->rx_msg.msg))
+			len = sizeof(cec->rx_msg.msg);
+
+		for (i = 0; i < len; i++)
+			cec->rx_msg.msg[i] =
+				dw_hdmi_read(cec, HDMI_CEC_RX_DATA0 + i);
+
+		dw_hdmi_write(cec, 0, HDMI_CEC_LOCK);
+
+		cec->rx_msg.len = len;
+		smp_wmb();
+		cec->rx_done = true;
+
+		ret = IRQ_WAKE_THREAD;
+	}
+
+	return ret;
+}
+
+static irqreturn_t dw_hdmi_cec_thread(int irq, void *data)
+{
+	struct cec_adapter *adap = data;
+	struct dw_hdmi_cec *cec = cec_get_drvdata(adap);
+
+	if (cec->tx_done) {
+		cec->tx_done = false;
+		cec_transmit_attempt_done(adap, cec->tx_status);
+	}
+	if (cec->rx_done) {
+		cec->rx_done = false;
+		smp_rmb();
+		cec_received_msg(adap, &cec->rx_msg);
+	}
+	return IRQ_HANDLED;
+}
+
+static int dw_hdmi_cec_enable(struct cec_adapter *adap, bool enable)
+{
+	struct dw_hdmi_cec *cec = cec_get_drvdata(adap);
+
+	if (!enable) {
+		dw_hdmi_write(cec, ~0, HDMI_CEC_MASK);
+		dw_hdmi_write(cec, ~0, HDMI_IH_MUTE_CEC_STAT0);
+		dw_hdmi_write(cec, 0, HDMI_CEC_POLARITY);
+
+		cec->ops->disable(cec->hdmi);
+	} else {
+		unsigned int irqs;
+
+		dw_hdmi_write(cec, 0, HDMI_CEC_CTRL);
+		dw_hdmi_write(cec, ~0, HDMI_IH_CEC_STAT0);
+		dw_hdmi_write(cec, 0, HDMI_CEC_LOCK);
+
+		dw_hdmi_cec_log_addr(cec->adap, CEC_LOG_ADDR_INVALID);
+
+		cec->ops->enable(cec->hdmi);
+
+		irqs = CEC_STAT_ERROR_INIT | CEC_STAT_NACK | CEC_STAT_EOM |
+		       CEC_STAT_DONE;
+		dw_hdmi_write(cec, irqs, HDMI_CEC_POLARITY);
+		dw_hdmi_write(cec, ~irqs, HDMI_CEC_MASK);
+		dw_hdmi_write(cec, ~irqs, HDMI_IH_MUTE_CEC_STAT0);
+	}
+	return 0;
+}
+
+static const struct cec_adap_ops dw_hdmi_cec_ops = {
+	.adap_enable = dw_hdmi_cec_enable,
+	.adap_log_addr = dw_hdmi_cec_log_addr,
+	.adap_transmit = dw_hdmi_cec_transmit,
+};
+
+static void dw_hdmi_cec_del(void *data)
+{
+	struct dw_hdmi_cec *cec = data;
+
+	cec_delete_adapter(cec->adap);
+}
+
+static int dw_hdmi_cec_probe(struct platform_device *pdev)
+{
+	struct dw_hdmi_cec_data *data = dev_get_platdata(&pdev->dev);
+	struct dw_hdmi_cec *cec;
+	int ret;
+
+	if (!data)
+		return -ENXIO;
+
+	/*
+	 * Our device is just a convenience - we want to link to the real
+	 * hardware device here, so that userspace can see the association
+	 * between the HDMI hardware and its associated CEC chardev.
+	 */
+	cec = devm_kzalloc(&pdev->dev, sizeof(*cec), GFP_KERNEL);
+	if (!cec)
+		return -ENOMEM;
+
+	cec->irq = data->irq;
+	cec->ops = data->ops;
+	cec->hdmi = data->hdmi;
+
+	platform_set_drvdata(pdev, cec);
+
+	dw_hdmi_write(cec, 0, HDMI_CEC_TX_CNT);
+	dw_hdmi_write(cec, ~0, HDMI_CEC_MASK);
+	dw_hdmi_write(cec, ~0, HDMI_IH_MUTE_CEC_STAT0);
+	dw_hdmi_write(cec, 0, HDMI_CEC_POLARITY);
+
+	cec->adap = cec_allocate_adapter(&dw_hdmi_cec_ops, cec, "dw_hdmi",
+					 CEC_CAP_LOG_ADDRS | CEC_CAP_TRANSMIT |
+					 CEC_CAP_RC | CEC_CAP_PASSTHROUGH,
+					 CEC_MAX_LOG_ADDRS);
+	if (IS_ERR(cec->adap))
+		return PTR_ERR(cec->adap);
+
+	/* override the module pointer */
+	cec->adap->owner = THIS_MODULE;
+
+	ret = devm_add_action(&pdev->dev, dw_hdmi_cec_del, cec);
+	if (ret) {
+		cec_delete_adapter(cec->adap);
+		return ret;
+	}
+
+	ret = devm_request_threaded_irq(&pdev->dev, cec->irq,
+					dw_hdmi_cec_hardirq,
+					dw_hdmi_cec_thread, IRQF_SHARED,
+					"dw-hdmi-cec", cec->adap);
+	if (ret < 0)
+		return ret;
+
+	cec->notify = cec_notifier_get(pdev->dev.parent);
+	if (!cec->notify)
+		return -ENOMEM;
+
+	ret = cec_register_adapter(cec->adap, pdev->dev.parent);
+	if (ret < 0) {
+		cec_notifier_put(cec->notify);
+		return ret;
+	}
+
+	/*
+	 * CEC documentation says we must not call cec_delete_adapter
+	 * after a successful call to cec_register_adapter().
+	 */
+	devm_remove_action(&pdev->dev, dw_hdmi_cec_del, cec);
+
+	cec_register_cec_notifier(cec->adap, cec->notify);
+
+	return 0;
+}
+
+static int dw_hdmi_cec_remove(struct platform_device *pdev)
+{
+	struct dw_hdmi_cec *cec = platform_get_drvdata(pdev);
+
+	cec_unregister_adapter(cec->adap);
+	cec_notifier_put(cec->notify);
+
+	return 0;
+}
+
+static struct platform_driver dw_hdmi_cec_driver = {
+	.probe	= dw_hdmi_cec_probe,
+	.remove	= dw_hdmi_cec_remove,
+	.driver = {
+		.name = "dw-hdmi-cec",
+	},
+};
+module_platform_driver(dw_hdmi_cec_driver);
+
+MODULE_AUTHOR("Russell King <rmk+kernel@armlinux.org.uk>");
+MODULE_DESCRIPTION("Synopsys Designware HDMI CEC driver for i.MX");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS(PLATFORM_MODULE_PREFIX "dw-hdmi-cec");
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-cec.h b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-cec.h
new file mode 100644
index 000000000..cf4dc121a
--- /dev/null
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-cec.h
@@ -0,0 +1,19 @@
+#ifndef DW_HDMI_CEC_H
+#define DW_HDMI_CEC_H
+
+struct dw_hdmi;
+
+struct dw_hdmi_cec_ops {
+	void (*write)(struct dw_hdmi *hdmi, u8 val, int offset);
+	u8 (*read)(struct dw_hdmi *hdmi, int offset);
+	void (*enable)(struct dw_hdmi *hdmi);
+	void (*disable)(struct dw_hdmi *hdmi);
+};
+
+struct dw_hdmi_cec_data {
+	struct dw_hdmi *hdmi;
+	const struct dw_hdmi_cec_ops *ops;
+	int irq;
+};
+
+#endif
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
new file mode 100644
index 000000000..8f9c8a6b4
--- /dev/null
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
@@ -0,0 +1,162 @@
+/*
+ * dw-hdmi-i2s-audio.c
+ *
+ * Copyright (c) 2017 Renesas Solutions Corp.
+ * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <drm/bridge/dw_hdmi.h>
+
+#include <sound/hdmi-codec.h>
+
+#include "dw-hdmi.h"
+#include "dw-hdmi-audio.h"
+
+#define DRIVER_NAME "dw-hdmi-i2s-audio"
+
+static inline void hdmi_write(struct dw_hdmi_i2s_audio_data *audio,
+			      u8 val, int offset)
+{
+	struct dw_hdmi *hdmi = audio->hdmi;
+
+	audio->write(hdmi, val, offset);
+}
+
+static inline u8 hdmi_read(struct dw_hdmi_i2s_audio_data *audio, int offset)
+{
+	struct dw_hdmi *hdmi = audio->hdmi;
+
+	return audio->read(hdmi, offset);
+}
+
+static int dw_hdmi_i2s_hw_params(struct device *dev, void *data,
+				 struct hdmi_codec_daifmt *fmt,
+				 struct hdmi_codec_params *hparms)
+{
+	struct dw_hdmi_i2s_audio_data *audio = data;
+	struct dw_hdmi *hdmi = audio->hdmi;
+	u8 conf0 = 0;
+	u8 conf1 = 0;
+	u8 inputclkfs = 0;
+
+	/* it cares I2S only */
+	if ((fmt->fmt != HDMI_I2S) ||
+	    (fmt->bit_clk_master | fmt->frame_clk_master)) {
+		dev_err(dev, "unsupported format/settings\n");
+		return -EINVAL;
+	}
+
+	inputclkfs	= HDMI_AUD_INPUTCLKFS_64FS;
+	conf0		= HDMI_AUD_CONF0_I2S_ALL_ENABLE;
+
+	switch (hparms->sample_width) {
+	case 16:
+		conf1 = HDMI_AUD_CONF1_WIDTH_16;
+		break;
+	case 24:
+	case 32:
+		conf1 = HDMI_AUD_CONF1_WIDTH_24;
+		break;
+	}
+
+	dw_hdmi_set_sample_rate(hdmi, hparms->sample_rate);
+
+	hdmi_write(audio, inputclkfs, HDMI_AUD_INPUTCLKFS);
+	hdmi_write(audio, conf0, HDMI_AUD_CONF0);
+	hdmi_write(audio, conf1, HDMI_AUD_CONF1);
+
+	dw_hdmi_audio_enable(hdmi);
+
+	return 0;
+}
+
+static void dw_hdmi_i2s_audio_shutdown(struct device *dev, void *data)
+{
+	struct dw_hdmi_i2s_audio_data *audio = data;
+	struct dw_hdmi *hdmi = audio->hdmi;
+
+	dw_hdmi_audio_disable(hdmi);
+
+	hdmi_write(audio, HDMI_AUD_CONF0_SW_RESET, HDMI_AUD_CONF0);
+}
+
+static int dw_hdmi_i2s_get_dai_id(struct snd_soc_component *component,
+				  struct device_node *endpoint)
+{
+	struct of_endpoint of_ep;
+	int ret;
+
+	ret = of_graph_parse_endpoint(endpoint, &of_ep);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * HDMI sound should be located as reg = <2>
+	 * Then, it is sound port 0
+	 */
+	if (of_ep.port == 2)
+		return 0;
+
+	return -EINVAL;
+}
+
+static struct hdmi_codec_ops dw_hdmi_i2s_ops = {
+	.hw_params	= dw_hdmi_i2s_hw_params,
+	.audio_shutdown	= dw_hdmi_i2s_audio_shutdown,
+	.get_dai_id	= dw_hdmi_i2s_get_dai_id,
+};
+
+static int snd_dw_hdmi_probe(struct platform_device *pdev)
+{
+	struct dw_hdmi_i2s_audio_data *audio = pdev->dev.platform_data;
+	struct platform_device_info pdevinfo;
+	struct hdmi_codec_pdata pdata;
+	struct platform_device *platform;
+
+	pdata.ops		= &dw_hdmi_i2s_ops;
+	pdata.i2s		= 1;
+	pdata.max_i2s_channels	= 6;
+	pdata.data		= audio;
+
+	memset(&pdevinfo, 0, sizeof(pdevinfo));
+	pdevinfo.parent		= pdev->dev.parent;
+	pdevinfo.id		= PLATFORM_DEVID_AUTO;
+	pdevinfo.name		= HDMI_CODEC_DRV_NAME;
+	pdevinfo.data		= &pdata;
+	pdevinfo.size_data	= sizeof(pdata);
+	pdevinfo.dma_mask	= DMA_BIT_MASK(32);
+
+	platform = platform_device_register_full(&pdevinfo);
+	if (IS_ERR(platform))
+		return PTR_ERR(platform);
+
+	dev_set_drvdata(&pdev->dev, platform);
+
+	return 0;
+}
+
+static int snd_dw_hdmi_remove(struct platform_device *pdev)
+{
+	struct platform_device *platform = dev_get_drvdata(&pdev->dev);
+
+	platform_device_unregister(platform);
+
+	return 0;
+}
+
+static struct platform_driver snd_dw_hdmi_driver = {
+	.probe	= snd_dw_hdmi_probe,
+	.remove	= snd_dw_hdmi_remove,
+	.driver	= {
+		.name = DRIVER_NAME,
+	},
+};
+module_platform_driver(snd_dw_hdmi_driver);
+
+MODULE_AUTHOR("Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>");
+MODULE_DESCRIPTION("Synopsis Designware HDMI I2S ALSA SoC interface");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DRIVER_NAME);
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
new file mode 100644
index 000000000..6930452a7
--- /dev/null
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -0,0 +1,2658 @@
+/*
+ * DesignWare High-Definition Multimedia Interface (HDMI) driver
+ *
+ * Copyright (C) 2013-2015 Mentor Graphics Inc.
+ * Copyright (C) 2011-2013 Freescale Semiconductor, Inc.
+ * Copyright (C) 2010, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#include <linux/module.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/hdmi.h>
+#include <linux/mutex.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/spinlock.h>
+
+#include <drm/drm_of.h>
+#include <drm/drmP.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_edid.h>
+#include <drm/drm_encoder_slave.h>
+#include <drm/bridge/dw_hdmi.h>
+
+#include <uapi/linux/media-bus-format.h>
+#include <uapi/linux/videodev2.h>
+
+#include "dw-hdmi.h"
+#include "dw-hdmi-audio.h"
+#include "dw-hdmi-cec.h"
+
+#include <media/cec-notifier.h>
+
+#define DDC_CI_ADDR		0x37
+#define DDC_SEGMENT_ADDR	0x30
+
+#define HDMI_EDID_LEN		512
+
+enum hdmi_datamap {
+	RGB444_8B = 0x01,
+	RGB444_10B = 0x03,
+	RGB444_12B = 0x05,
+	RGB444_16B = 0x07,
+	YCbCr444_8B = 0x09,
+	YCbCr444_10B = 0x0B,
+	YCbCr444_12B = 0x0D,
+	YCbCr444_16B = 0x0F,
+	YCbCr422_8B = 0x16,
+	YCbCr422_10B = 0x14,
+	YCbCr422_12B = 0x12,
+};
+
+static const u16 csc_coeff_default[3][4] = {
+	{ 0x2000, 0x0000, 0x0000, 0x0000 },
+	{ 0x0000, 0x2000, 0x0000, 0x0000 },
+	{ 0x0000, 0x0000, 0x2000, 0x0000 }
+};
+
+static const u16 csc_coeff_rgb_out_eitu601[3][4] = {
+	{ 0x2000, 0x6926, 0x74fd, 0x010e },
+	{ 0x2000, 0x2cdd, 0x0000, 0x7e9a },
+	{ 0x2000, 0x0000, 0x38b4, 0x7e3b }
+};
+
+static const u16 csc_coeff_rgb_out_eitu709[3][4] = {
+	{ 0x2000, 0x7106, 0x7a02, 0x00a7 },
+	{ 0x2000, 0x3264, 0x0000, 0x7e6d },
+	{ 0x2000, 0x0000, 0x3b61, 0x7e25 }
+};
+
+static const u16 csc_coeff_rgb_in_eitu601[3][4] = {
+	{ 0x2591, 0x1322, 0x074b, 0x0000 },
+	{ 0x6535, 0x2000, 0x7acc, 0x0200 },
+	{ 0x6acd, 0x7534, 0x2000, 0x0200 }
+};
+
+static const u16 csc_coeff_rgb_in_eitu709[3][4] = {
+	{ 0x2dc5, 0x0d9b, 0x049e, 0x0000 },
+	{ 0x62f0, 0x2000, 0x7d11, 0x0200 },
+	{ 0x6756, 0x78ab, 0x2000, 0x0200 }
+};
+
+struct hdmi_vmode {
+	bool mdataenablepolarity;
+
+	unsigned int mpixelclock;
+	unsigned int mpixelrepetitioninput;
+	unsigned int mpixelrepetitionoutput;
+};
+
+struct hdmi_data_info {
+	unsigned int enc_in_bus_format;
+	unsigned int enc_out_bus_format;
+	unsigned int enc_in_encoding;
+	unsigned int enc_out_encoding;
+	unsigned int pix_repet_factor;
+	unsigned int hdcp_enable;
+	struct hdmi_vmode video_mode;
+};
+
+struct dw_hdmi_i2c {
+	struct i2c_adapter	adap;
+
+	struct mutex		lock;	/* used to serialize data transfers */
+	struct completion	cmp;
+	u8			stat;
+
+	u8			slave_reg;
+	bool			is_regaddr;
+	bool			is_segment;
+};
+
+struct dw_hdmi_phy_data {
+	enum dw_hdmi_phy_type type;
+	const char *name;
+	unsigned int gen;
+	bool has_svsret;
+	int (*configure)(struct dw_hdmi *hdmi,
+			 const struct dw_hdmi_plat_data *pdata,
+			 unsigned long mpixelclock);
+};
+
+struct dw_hdmi {
+	struct drm_connector connector;
+	struct drm_bridge bridge;
+
+	unsigned int version;
+
+	struct platform_device *audio;
+	struct platform_device *cec;
+	struct device *dev;
+	struct clk *isfr_clk;
+	struct clk *iahb_clk;
+	struct clk *cec_clk;
+	struct dw_hdmi_i2c *i2c;
+
+	struct hdmi_data_info hdmi_data;
+	const struct dw_hdmi_plat_data *plat_data;
+
+	int vic;
+
+	u8 edid[HDMI_EDID_LEN];
+
+	struct {
+		const struct dw_hdmi_phy_ops *ops;
+		const char *name;
+		void *data;
+		bool enabled;
+	} phy;
+
+	struct drm_display_mode previous_mode;
+
+	struct i2c_adapter *ddc;
+	void __iomem *regs;
+	bool sink_is_hdmi;
+	bool sink_has_audio;
+
+	struct mutex mutex;		/* for state below and previous_mode */
+	enum drm_connector_force force;	/* mutex-protected force state */
+	bool disabled;			/* DRM has disabled our bridge */
+	bool bridge_is_on;		/* indicates the bridge is on */
+	bool rxsense;			/* rxsense state */
+	u8 phy_mask;			/* desired phy int mask settings */
+	u8 mc_clkdis;			/* clock disable register */
+
+	spinlock_t audio_lock;
+	struct mutex audio_mutex;
+	unsigned int sample_rate;
+	unsigned int audio_cts;
+	unsigned int audio_n;
+	bool audio_enable;
+
+	unsigned int reg_shift;
+	struct regmap *regm;
+	void (*enable_audio)(struct dw_hdmi *hdmi);
+	void (*disable_audio)(struct dw_hdmi *hdmi);
+
+	struct cec_notifier *cec_notifier;
+};
+
+#define HDMI_IH_PHY_STAT0_RX_SENSE \
+	(HDMI_IH_PHY_STAT0_RX_SENSE0 | HDMI_IH_PHY_STAT0_RX_SENSE1 | \
+	 HDMI_IH_PHY_STAT0_RX_SENSE2 | HDMI_IH_PHY_STAT0_RX_SENSE3)
+
+#define HDMI_PHY_RX_SENSE \
+	(HDMI_PHY_RX_SENSE0 | HDMI_PHY_RX_SENSE1 | \
+	 HDMI_PHY_RX_SENSE2 | HDMI_PHY_RX_SENSE3)
+
+static inline void hdmi_writeb(struct dw_hdmi *hdmi, u8 val, int offset)
+{
+	regmap_write(hdmi->regm, offset << hdmi->reg_shift, val);
+}
+
+static inline u8 hdmi_readb(struct dw_hdmi *hdmi, int offset)
+{
+	unsigned int val = 0;
+
+	regmap_read(hdmi->regm, offset << hdmi->reg_shift, &val);
+
+	return val;
+}
+
+static void hdmi_modb(struct dw_hdmi *hdmi, u8 data, u8 mask, unsigned reg)
+{
+	regmap_update_bits(hdmi->regm, reg << hdmi->reg_shift, mask, data);
+}
+
+static void hdmi_mask_writeb(struct dw_hdmi *hdmi, u8 data, unsigned int reg,
+			     u8 shift, u8 mask)
+{
+	hdmi_modb(hdmi, data << shift, mask, reg);
+}
+
+static void dw_hdmi_i2c_init(struct dw_hdmi *hdmi)
+{
+	/* Software reset */
+	hdmi_writeb(hdmi, 0x00, HDMI_I2CM_SOFTRSTZ);
+
+	/* Set Standard Mode speed (determined to be 100KHz on iMX6) */
+	hdmi_writeb(hdmi, 0x00, HDMI_I2CM_DIV);
+
+	/* Set done, not acknowledged and arbitration interrupt polarities */
+	hdmi_writeb(hdmi, HDMI_I2CM_INT_DONE_POL, HDMI_I2CM_INT);
+	hdmi_writeb(hdmi, HDMI_I2CM_CTLINT_NAC_POL | HDMI_I2CM_CTLINT_ARB_POL,
+		    HDMI_I2CM_CTLINT);
+
+	/* Clear DONE and ERROR interrupts */
+	hdmi_writeb(hdmi, HDMI_IH_I2CM_STAT0_ERROR | HDMI_IH_I2CM_STAT0_DONE,
+		    HDMI_IH_I2CM_STAT0);
+
+	/* Mute DONE and ERROR interrupts */
+	hdmi_writeb(hdmi, HDMI_IH_I2CM_STAT0_ERROR | HDMI_IH_I2CM_STAT0_DONE,
+		    HDMI_IH_MUTE_I2CM_STAT0);
+}
+
+static int dw_hdmi_i2c_read(struct dw_hdmi *hdmi,
+			    unsigned char *buf, unsigned int length)
+{
+	struct dw_hdmi_i2c *i2c = hdmi->i2c;
+	int stat;
+
+	if (!i2c->is_regaddr) {
+		dev_dbg(hdmi->dev, "set read register address to 0\n");
+		i2c->slave_reg = 0x00;
+		i2c->is_regaddr = true;
+	}
+
+	while (length--) {
+		reinit_completion(&i2c->cmp);
+
+		hdmi_writeb(hdmi, i2c->slave_reg++, HDMI_I2CM_ADDRESS);
+		if (i2c->is_segment)
+			hdmi_writeb(hdmi, HDMI_I2CM_OPERATION_READ_EXT,
+				    HDMI_I2CM_OPERATION);
+		else
+			hdmi_writeb(hdmi, HDMI_I2CM_OPERATION_READ,
+				    HDMI_I2CM_OPERATION);
+
+		stat = wait_for_completion_timeout(&i2c->cmp, HZ / 10);
+		if (!stat)
+			return -EAGAIN;
+
+		/* Check for error condition on the bus */
+		if (i2c->stat & HDMI_IH_I2CM_STAT0_ERROR)
+			return -EIO;
+
+		*buf++ = hdmi_readb(hdmi, HDMI_I2CM_DATAI);
+	}
+	i2c->is_segment = false;
+
+	return 0;
+}
+
+static int dw_hdmi_i2c_write(struct dw_hdmi *hdmi,
+			     unsigned char *buf, unsigned int length)
+{
+	struct dw_hdmi_i2c *i2c = hdmi->i2c;
+	int stat;
+
+	if (!i2c->is_regaddr) {
+		/* Use the first write byte as register address */
+		i2c->slave_reg = buf[0];
+		length--;
+		buf++;
+		i2c->is_regaddr = true;
+	}
+
+	while (length--) {
+		reinit_completion(&i2c->cmp);
+
+		hdmi_writeb(hdmi, *buf++, HDMI_I2CM_DATAO);
+		hdmi_writeb(hdmi, i2c->slave_reg++, HDMI_I2CM_ADDRESS);
+		hdmi_writeb(hdmi, HDMI_I2CM_OPERATION_WRITE,
+			    HDMI_I2CM_OPERATION);
+
+		stat = wait_for_completion_timeout(&i2c->cmp, HZ / 10);
+		if (!stat)
+			return -EAGAIN;
+
+		/* Check for error condition on the bus */
+		if (i2c->stat & HDMI_IH_I2CM_STAT0_ERROR)
+			return -EIO;
+	}
+
+	return 0;
+}
+
+static int dw_hdmi_i2c_xfer(struct i2c_adapter *adap,
+			    struct i2c_msg *msgs, int num)
+{
+	struct dw_hdmi *hdmi = i2c_get_adapdata(adap);
+	struct dw_hdmi_i2c *i2c = hdmi->i2c;
+	u8 addr = msgs[0].addr;
+	int i, ret = 0;
+
+	if (addr == DDC_CI_ADDR)
+		/*
+		 * The internal I2C controller does not support the multi-byte
+		 * read and write operations needed for DDC/CI.
+		 * TOFIX: Blacklist the DDC/CI address until we filter out
+		 * unsupported I2C operations.
+		 */
+		return -EOPNOTSUPP;
+
+	dev_dbg(hdmi->dev, "xfer: num: %d, addr: %#x\n", num, addr);
+
+	for (i = 0; i < num; i++) {
+		if (msgs[i].len == 0) {
+			dev_dbg(hdmi->dev,
+				"unsupported transfer %d/%d, no data\n",
+				i + 1, num);
+			return -EOPNOTSUPP;
+		}
+	}
+
+	mutex_lock(&i2c->lock);
+
+	/* Unmute DONE and ERROR interrupts */
+	hdmi_writeb(hdmi, 0x00, HDMI_IH_MUTE_I2CM_STAT0);
+
+	/* Set slave device address taken from the first I2C message */
+	hdmi_writeb(hdmi, addr, HDMI_I2CM_SLAVE);
+
+	/* Set slave device register address on transfer */
+	i2c->is_regaddr = false;
+
+	/* Set segment pointer for I2C extended read mode operation */
+	i2c->is_segment = false;
+
+	for (i = 0; i < num; i++) {
+		dev_dbg(hdmi->dev, "xfer: num: %d/%d, len: %d, flags: %#x\n",
+			i + 1, num, msgs[i].len, msgs[i].flags);
+		if (msgs[i].addr == DDC_SEGMENT_ADDR && msgs[i].len == 1) {
+			i2c->is_segment = true;
+			hdmi_writeb(hdmi, DDC_SEGMENT_ADDR, HDMI_I2CM_SEGADDR);
+			hdmi_writeb(hdmi, *msgs[i].buf, HDMI_I2CM_SEGPTR);
+		} else {
+			if (msgs[i].flags & I2C_M_RD)
+				ret = dw_hdmi_i2c_read(hdmi, msgs[i].buf,
+						       msgs[i].len);
+			else
+				ret = dw_hdmi_i2c_write(hdmi, msgs[i].buf,
+							msgs[i].len);
+		}
+		if (ret < 0)
+			break;
+	}
+
+	if (!ret)
+		ret = num;
+
+	/* Mute DONE and ERROR interrupts */
+	hdmi_writeb(hdmi, HDMI_IH_I2CM_STAT0_ERROR | HDMI_IH_I2CM_STAT0_DONE,
+		    HDMI_IH_MUTE_I2CM_STAT0);
+
+	mutex_unlock(&i2c->lock);
+
+	return ret;
+}
+
+static u32 dw_hdmi_i2c_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm dw_hdmi_algorithm = {
+	.master_xfer	= dw_hdmi_i2c_xfer,
+	.functionality	= dw_hdmi_i2c_func,
+};
+
+static struct i2c_adapter *dw_hdmi_i2c_adapter(struct dw_hdmi *hdmi)
+{
+	struct i2c_adapter *adap;
+	struct dw_hdmi_i2c *i2c;
+	int ret;
+
+	i2c = devm_kzalloc(hdmi->dev, sizeof(*i2c), GFP_KERNEL);
+	if (!i2c)
+		return ERR_PTR(-ENOMEM);
+
+	mutex_init(&i2c->lock);
+	init_completion(&i2c->cmp);
+
+	adap = &i2c->adap;
+	adap->class = I2C_CLASS_DDC;
+	adap->owner = THIS_MODULE;
+	adap->dev.parent = hdmi->dev;
+	adap->algo = &dw_hdmi_algorithm;
+	strlcpy(adap->name, "DesignWare HDMI", sizeof(adap->name));
+	i2c_set_adapdata(adap, hdmi);
+
+	ret = i2c_add_adapter(adap);
+	if (ret) {
+		dev_warn(hdmi->dev, "cannot add %s I2C adapter\n", adap->name);
+		devm_kfree(hdmi->dev, i2c);
+		return ERR_PTR(ret);
+	}
+
+	hdmi->i2c = i2c;
+
+	dev_info(hdmi->dev, "registered %s I2C bus driver\n", adap->name);
+
+	return adap;
+}
+
+static void hdmi_set_cts_n(struct dw_hdmi *hdmi, unsigned int cts,
+			   unsigned int n)
+{
+	/* Must be set/cleared first */
+	hdmi_modb(hdmi, 0, HDMI_AUD_CTS3_CTS_MANUAL, HDMI_AUD_CTS3);
+
+	/* nshift factor = 0 */
+	hdmi_modb(hdmi, 0, HDMI_AUD_CTS3_N_SHIFT_MASK, HDMI_AUD_CTS3);
+
+	hdmi_writeb(hdmi, ((cts >> 16) & HDMI_AUD_CTS3_AUDCTS19_16_MASK) |
+		    HDMI_AUD_CTS3_CTS_MANUAL, HDMI_AUD_CTS3);
+	hdmi_writeb(hdmi, (cts >> 8) & 0xff, HDMI_AUD_CTS2);
+	hdmi_writeb(hdmi, cts & 0xff, HDMI_AUD_CTS1);
+
+	hdmi_writeb(hdmi, (n >> 16) & 0x0f, HDMI_AUD_N3);
+	hdmi_writeb(hdmi, (n >> 8) & 0xff, HDMI_AUD_N2);
+	hdmi_writeb(hdmi, n & 0xff, HDMI_AUD_N1);
+}
+
+static unsigned int hdmi_compute_n(unsigned int freq, unsigned long pixel_clk)
+{
+	unsigned int n = (128 * freq) / 1000;
+	unsigned int mult = 1;
+
+	while (freq > 48000) {
+		mult *= 2;
+		freq /= 2;
+	}
+
+	switch (freq) {
+	case 32000:
+		if (pixel_clk == 25175000)
+			n = 4576;
+		else if (pixel_clk == 27027000)
+			n = 4096;
+		else if (pixel_clk == 74176000 || pixel_clk == 148352000)
+			n = 11648;
+		else
+			n = 4096;
+		n *= mult;
+		break;
+
+	case 44100:
+		if (pixel_clk == 25175000)
+			n = 7007;
+		else if (pixel_clk == 74176000)
+			n = 17836;
+		else if (pixel_clk == 148352000)
+			n = 8918;
+		else
+			n = 6272;
+		n *= mult;
+		break;
+
+	case 48000:
+		if (pixel_clk == 25175000)
+			n = 6864;
+		else if (pixel_clk == 27027000)
+			n = 6144;
+		else if (pixel_clk == 74176000)
+			n = 11648;
+		else if (pixel_clk == 148352000)
+			n = 5824;
+		else
+			n = 6144;
+		n *= mult;
+		break;
+
+	default:
+		break;
+	}
+
+	return n;
+}
+
+static void hdmi_set_clk_regenerator(struct dw_hdmi *hdmi,
+	unsigned long pixel_clk, unsigned int sample_rate)
+{
+	unsigned long ftdms = pixel_clk;
+	unsigned int n, cts;
+	u64 tmp;
+
+	n = hdmi_compute_n(sample_rate, pixel_clk);
+
+	/*
+	 * Compute the CTS value from the N value.  Note that CTS and N
+	 * can be up to 20 bits in total, so we need 64-bit math.  Also
+	 * note that our TDMS clock is not fully accurate; it is accurate
+	 * to kHz.  This can introduce an unnecessary remainder in the
+	 * calculation below, so we don't try to warn about that.
+	 */
+	tmp = (u64)ftdms * n;
+	do_div(tmp, 128 * sample_rate);
+	cts = tmp;
+
+	dev_dbg(hdmi->dev, "%s: fs=%uHz ftdms=%lu.%03luMHz N=%d cts=%d\n",
+		__func__, sample_rate, ftdms / 1000000, (ftdms / 1000) % 1000,
+		n, cts);
+
+	spin_lock_irq(&hdmi->audio_lock);
+	hdmi->audio_n = n;
+	hdmi->audio_cts = cts;
+	hdmi_set_cts_n(hdmi, cts, hdmi->audio_enable ? n : 0);
+	spin_unlock_irq(&hdmi->audio_lock);
+}
+
+static void hdmi_init_clk_regenerator(struct dw_hdmi *hdmi)
+{
+	mutex_lock(&hdmi->audio_mutex);
+	hdmi_set_clk_regenerator(hdmi, 74250000, hdmi->sample_rate);
+	mutex_unlock(&hdmi->audio_mutex);
+}
+
+static void hdmi_clk_regenerator_update_pixel_clock(struct dw_hdmi *hdmi)
+{
+	mutex_lock(&hdmi->audio_mutex);
+	hdmi_set_clk_regenerator(hdmi, hdmi->hdmi_data.video_mode.mpixelclock,
+				 hdmi->sample_rate);
+	mutex_unlock(&hdmi->audio_mutex);
+}
+
+void dw_hdmi_set_sample_rate(struct dw_hdmi *hdmi, unsigned int rate)
+{
+	mutex_lock(&hdmi->audio_mutex);
+	hdmi->sample_rate = rate;
+	hdmi_set_clk_regenerator(hdmi, hdmi->hdmi_data.video_mode.mpixelclock,
+				 hdmi->sample_rate);
+	mutex_unlock(&hdmi->audio_mutex);
+}
+EXPORT_SYMBOL_GPL(dw_hdmi_set_sample_rate);
+
+static void hdmi_enable_audio_clk(struct dw_hdmi *hdmi, bool enable)
+{
+	if (enable)
+		hdmi->mc_clkdis &= ~HDMI_MC_CLKDIS_AUDCLK_DISABLE;
+	else
+		hdmi->mc_clkdis |= HDMI_MC_CLKDIS_AUDCLK_DISABLE;
+	hdmi_writeb(hdmi, hdmi->mc_clkdis, HDMI_MC_CLKDIS);
+}
+
+static void dw_hdmi_ahb_audio_enable(struct dw_hdmi *hdmi)
+{
+	hdmi_set_cts_n(hdmi, hdmi->audio_cts, hdmi->audio_n);
+}
+
+static void dw_hdmi_ahb_audio_disable(struct dw_hdmi *hdmi)
+{
+	hdmi_set_cts_n(hdmi, hdmi->audio_cts, 0);
+}
+
+static void dw_hdmi_i2s_audio_enable(struct dw_hdmi *hdmi)
+{
+	hdmi_set_cts_n(hdmi, hdmi->audio_cts, hdmi->audio_n);
+	hdmi_enable_audio_clk(hdmi, true);
+}
+
+static void dw_hdmi_i2s_audio_disable(struct dw_hdmi *hdmi)
+{
+	hdmi_enable_audio_clk(hdmi, false);
+}
+
+void dw_hdmi_audio_enable(struct dw_hdmi *hdmi)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&hdmi->audio_lock, flags);
+	hdmi->audio_enable = true;
+	if (hdmi->enable_audio)
+		hdmi->enable_audio(hdmi);
+	spin_unlock_irqrestore(&hdmi->audio_lock, flags);
+}
+EXPORT_SYMBOL_GPL(dw_hdmi_audio_enable);
+
+void dw_hdmi_audio_disable(struct dw_hdmi *hdmi)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&hdmi->audio_lock, flags);
+	hdmi->audio_enable = false;
+	if (hdmi->disable_audio)
+		hdmi->disable_audio(hdmi);
+	spin_unlock_irqrestore(&hdmi->audio_lock, flags);
+}
+EXPORT_SYMBOL_GPL(dw_hdmi_audio_disable);
+
+static bool hdmi_bus_fmt_is_rgb(unsigned int bus_format)
+{
+	switch (bus_format) {
+	case MEDIA_BUS_FMT_RGB888_1X24:
+	case MEDIA_BUS_FMT_RGB101010_1X30:
+	case MEDIA_BUS_FMT_RGB121212_1X36:
+	case MEDIA_BUS_FMT_RGB161616_1X48:
+		return true;
+
+	default:
+		return false;
+	}
+}
+
+static bool hdmi_bus_fmt_is_yuv444(unsigned int bus_format)
+{
+	switch (bus_format) {
+	case MEDIA_BUS_FMT_YUV8_1X24:
+	case MEDIA_BUS_FMT_YUV10_1X30:
+	case MEDIA_BUS_FMT_YUV12_1X36:
+	case MEDIA_BUS_FMT_YUV16_1X48:
+		return true;
+
+	default:
+		return false;
+	}
+}
+
+static bool hdmi_bus_fmt_is_yuv422(unsigned int bus_format)
+{
+	switch (bus_format) {
+	case MEDIA_BUS_FMT_UYVY8_1X16:
+	case MEDIA_BUS_FMT_UYVY10_1X20:
+	case MEDIA_BUS_FMT_UYVY12_1X24:
+		return true;
+
+	default:
+		return false;
+	}
+}
+
+static int hdmi_bus_fmt_color_depth(unsigned int bus_format)
+{
+	switch (bus_format) {
+	case MEDIA_BUS_FMT_RGB888_1X24:
+	case MEDIA_BUS_FMT_YUV8_1X24:
+	case MEDIA_BUS_FMT_UYVY8_1X16:
+	case MEDIA_BUS_FMT_UYYVYY8_0_5X24:
+		return 8;
+
+	case MEDIA_BUS_FMT_RGB101010_1X30:
+	case MEDIA_BUS_FMT_YUV10_1X30:
+	case MEDIA_BUS_FMT_UYVY10_1X20:
+	case MEDIA_BUS_FMT_UYYVYY10_0_5X30:
+		return 10;
+
+	case MEDIA_BUS_FMT_RGB121212_1X36:
+	case MEDIA_BUS_FMT_YUV12_1X36:
+	case MEDIA_BUS_FMT_UYVY12_1X24:
+	case MEDIA_BUS_FMT_UYYVYY12_0_5X36:
+		return 12;
+
+	case MEDIA_BUS_FMT_RGB161616_1X48:
+	case MEDIA_BUS_FMT_YUV16_1X48:
+	case MEDIA_BUS_FMT_UYYVYY16_0_5X48:
+		return 16;
+
+	default:
+		return 0;
+	}
+}
+
+/*
+ * this submodule is responsible for the video data synchronization.
+ * for example, for RGB 4:4:4 input, the data map is defined as
+ *			pin{47~40} <==> R[7:0]
+ *			pin{31~24} <==> G[7:0]
+ *			pin{15~8}  <==> B[7:0]
+ */
+static void hdmi_video_sample(struct dw_hdmi *hdmi)
+{
+	int color_format = 0;
+	u8 val;
+
+	switch (hdmi->hdmi_data.enc_in_bus_format) {
+	case MEDIA_BUS_FMT_RGB888_1X24:
+		color_format = 0x01;
+		break;
+	case MEDIA_BUS_FMT_RGB101010_1X30:
+		color_format = 0x03;
+		break;
+	case MEDIA_BUS_FMT_RGB121212_1X36:
+		color_format = 0x05;
+		break;
+	case MEDIA_BUS_FMT_RGB161616_1X48:
+		color_format = 0x07;
+		break;
+
+	case MEDIA_BUS_FMT_YUV8_1X24:
+	case MEDIA_BUS_FMT_UYYVYY8_0_5X24:
+		color_format = 0x09;
+		break;
+	case MEDIA_BUS_FMT_YUV10_1X30:
+	case MEDIA_BUS_FMT_UYYVYY10_0_5X30:
+		color_format = 0x0B;
+		break;
+	case MEDIA_BUS_FMT_YUV12_1X36:
+	case MEDIA_BUS_FMT_UYYVYY12_0_5X36:
+		color_format = 0x0D;
+		break;
+	case MEDIA_BUS_FMT_YUV16_1X48:
+	case MEDIA_BUS_FMT_UYYVYY16_0_5X48:
+		color_format = 0x0F;
+		break;
+
+	case MEDIA_BUS_FMT_UYVY8_1X16:
+		color_format = 0x16;
+		break;
+	case MEDIA_BUS_FMT_UYVY10_1X20:
+		color_format = 0x14;
+		break;
+	case MEDIA_BUS_FMT_UYVY12_1X24:
+		color_format = 0x12;
+		break;
+
+	default:
+		return;
+	}
+
+	val = HDMI_TX_INVID0_INTERNAL_DE_GENERATOR_DISABLE |
+		((color_format << HDMI_TX_INVID0_VIDEO_MAPPING_OFFSET) &
+		HDMI_TX_INVID0_VIDEO_MAPPING_MASK);
+	hdmi_writeb(hdmi, val, HDMI_TX_INVID0);
+
+	/* Enable TX stuffing: When DE is inactive, fix the output data to 0 */
+	val = HDMI_TX_INSTUFFING_BDBDATA_STUFFING_ENABLE |
+		HDMI_TX_INSTUFFING_RCRDATA_STUFFING_ENABLE |
+		HDMI_TX_INSTUFFING_GYDATA_STUFFING_ENABLE;
+	hdmi_writeb(hdmi, val, HDMI_TX_INSTUFFING);
+	hdmi_writeb(hdmi, 0x0, HDMI_TX_GYDATA0);
+	hdmi_writeb(hdmi, 0x0, HDMI_TX_GYDATA1);
+	hdmi_writeb(hdmi, 0x0, HDMI_TX_RCRDATA0);
+	hdmi_writeb(hdmi, 0x0, HDMI_TX_RCRDATA1);
+	hdmi_writeb(hdmi, 0x0, HDMI_TX_BCBDATA0);
+	hdmi_writeb(hdmi, 0x0, HDMI_TX_BCBDATA1);
+}
+
+static int is_color_space_conversion(struct dw_hdmi *hdmi)
+{
+	return hdmi->hdmi_data.enc_in_bus_format != hdmi->hdmi_data.enc_out_bus_format;
+}
+
+static int is_color_space_decimation(struct dw_hdmi *hdmi)
+{
+	if (!hdmi_bus_fmt_is_yuv422(hdmi->hdmi_data.enc_out_bus_format))
+		return 0;
+
+	if (hdmi_bus_fmt_is_rgb(hdmi->hdmi_data.enc_in_bus_format) ||
+	    hdmi_bus_fmt_is_yuv444(hdmi->hdmi_data.enc_in_bus_format))
+		return 1;
+
+	return 0;
+}
+
+static int is_color_space_interpolation(struct dw_hdmi *hdmi)
+{
+	if (!hdmi_bus_fmt_is_yuv422(hdmi->hdmi_data.enc_in_bus_format))
+		return 0;
+
+	if (hdmi_bus_fmt_is_rgb(hdmi->hdmi_data.enc_out_bus_format) ||
+	    hdmi_bus_fmt_is_yuv444(hdmi->hdmi_data.enc_out_bus_format))
+		return 1;
+
+	return 0;
+}
+
+static void dw_hdmi_update_csc_coeffs(struct dw_hdmi *hdmi)
+{
+	const u16 (*csc_coeff)[3][4] = &csc_coeff_default;
+	unsigned i;
+	u32 csc_scale = 1;
+
+	if (is_color_space_conversion(hdmi)) {
+		if (hdmi_bus_fmt_is_rgb(hdmi->hdmi_data.enc_out_bus_format)) {
+			if (hdmi->hdmi_data.enc_out_encoding ==
+						V4L2_YCBCR_ENC_601)
+				csc_coeff = &csc_coeff_rgb_out_eitu601;
+			else
+				csc_coeff = &csc_coeff_rgb_out_eitu709;
+		} else if (hdmi_bus_fmt_is_rgb(
+					hdmi->hdmi_data.enc_in_bus_format)) {
+			if (hdmi->hdmi_data.enc_out_encoding ==
+						V4L2_YCBCR_ENC_601)
+				csc_coeff = &csc_coeff_rgb_in_eitu601;
+			else
+				csc_coeff = &csc_coeff_rgb_in_eitu709;
+			csc_scale = 0;
+		}
+	}
+
+	/* The CSC registers are sequential, alternating MSB then LSB */
+	for (i = 0; i < ARRAY_SIZE(csc_coeff_default[0]); i++) {
+		u16 coeff_a = (*csc_coeff)[0][i];
+		u16 coeff_b = (*csc_coeff)[1][i];
+		u16 coeff_c = (*csc_coeff)[2][i];
+
+		hdmi_writeb(hdmi, coeff_a & 0xff, HDMI_CSC_COEF_A1_LSB + i * 2);
+		hdmi_writeb(hdmi, coeff_a >> 8, HDMI_CSC_COEF_A1_MSB + i * 2);
+		hdmi_writeb(hdmi, coeff_b & 0xff, HDMI_CSC_COEF_B1_LSB + i * 2);
+		hdmi_writeb(hdmi, coeff_b >> 8, HDMI_CSC_COEF_B1_MSB + i * 2);
+		hdmi_writeb(hdmi, coeff_c & 0xff, HDMI_CSC_COEF_C1_LSB + i * 2);
+		hdmi_writeb(hdmi, coeff_c >> 8, HDMI_CSC_COEF_C1_MSB + i * 2);
+	}
+
+	hdmi_modb(hdmi, csc_scale, HDMI_CSC_SCALE_CSCSCALE_MASK,
+		  HDMI_CSC_SCALE);
+}
+
+static void hdmi_video_csc(struct dw_hdmi *hdmi)
+{
+	int color_depth = 0;
+	int interpolation = HDMI_CSC_CFG_INTMODE_DISABLE;
+	int decimation = 0;
+
+	/* YCC422 interpolation to 444 mode */
+	if (is_color_space_interpolation(hdmi))
+		interpolation = HDMI_CSC_CFG_INTMODE_CHROMA_INT_FORMULA1;
+	else if (is_color_space_decimation(hdmi))
+		decimation = HDMI_CSC_CFG_DECMODE_CHROMA_INT_FORMULA3;
+
+	switch (hdmi_bus_fmt_color_depth(hdmi->hdmi_data.enc_out_bus_format)) {
+	case 8:
+		color_depth = HDMI_CSC_SCALE_CSC_COLORDE_PTH_24BPP;
+		break;
+	case 10:
+		color_depth = HDMI_CSC_SCALE_CSC_COLORDE_PTH_30BPP;
+		break;
+	case 12:
+		color_depth = HDMI_CSC_SCALE_CSC_COLORDE_PTH_36BPP;
+		break;
+	case 16:
+		color_depth = HDMI_CSC_SCALE_CSC_COLORDE_PTH_48BPP;
+		break;
+
+	default:
+		return;
+	}
+
+	/* Configure the CSC registers */
+	hdmi_writeb(hdmi, interpolation | decimation, HDMI_CSC_CFG);
+	hdmi_modb(hdmi, color_depth, HDMI_CSC_SCALE_CSC_COLORDE_PTH_MASK,
+		  HDMI_CSC_SCALE);
+
+	dw_hdmi_update_csc_coeffs(hdmi);
+}
+
+/*
+ * HDMI video packetizer is used to packetize the data.
+ * for example, if input is YCC422 mode or repeater is used,
+ * data should be repacked this module can be bypassed.
+ */
+static void hdmi_video_packetize(struct dw_hdmi *hdmi)
+{
+	unsigned int color_depth = 0;
+	unsigned int remap_size = HDMI_VP_REMAP_YCC422_16bit;
+	unsigned int output_select = HDMI_VP_CONF_OUTPUT_SELECTOR_PP;
+	struct hdmi_data_info *hdmi_data = &hdmi->hdmi_data;
+	u8 val, vp_conf;
+
+	if (hdmi_bus_fmt_is_rgb(hdmi->hdmi_data.enc_out_bus_format) ||
+	    hdmi_bus_fmt_is_yuv444(hdmi->hdmi_data.enc_out_bus_format)) {
+		switch (hdmi_bus_fmt_color_depth(
+					hdmi->hdmi_data.enc_out_bus_format)) {
+		case 8:
+			color_depth = 4;
+			output_select = HDMI_VP_CONF_OUTPUT_SELECTOR_BYPASS;
+			break;
+		case 10:
+			color_depth = 5;
+			break;
+		case 12:
+			color_depth = 6;
+			break;
+		case 16:
+			color_depth = 7;
+			break;
+		default:
+			output_select = HDMI_VP_CONF_OUTPUT_SELECTOR_BYPASS;
+		}
+	} else if (hdmi_bus_fmt_is_yuv422(hdmi->hdmi_data.enc_out_bus_format)) {
+		switch (hdmi_bus_fmt_color_depth(
+					hdmi->hdmi_data.enc_out_bus_format)) {
+		case 0:
+		case 8:
+			remap_size = HDMI_VP_REMAP_YCC422_16bit;
+			break;
+		case 10:
+			remap_size = HDMI_VP_REMAP_YCC422_20bit;
+			break;
+		case 12:
+			remap_size = HDMI_VP_REMAP_YCC422_24bit;
+			break;
+
+		default:
+			return;
+		}
+		output_select = HDMI_VP_CONF_OUTPUT_SELECTOR_YCC422;
+	} else {
+		return;
+	}
+
+	/* set the packetizer registers */
+	val = ((color_depth << HDMI_VP_PR_CD_COLOR_DEPTH_OFFSET) &
+		HDMI_VP_PR_CD_COLOR_DEPTH_MASK) |
+		((hdmi_data->pix_repet_factor <<
+		HDMI_VP_PR_CD_DESIRED_PR_FACTOR_OFFSET) &
+		HDMI_VP_PR_CD_DESIRED_PR_FACTOR_MASK);
+	hdmi_writeb(hdmi, val, HDMI_VP_PR_CD);
+
+	hdmi_modb(hdmi, HDMI_VP_STUFF_PR_STUFFING_STUFFING_MODE,
+		  HDMI_VP_STUFF_PR_STUFFING_MASK, HDMI_VP_STUFF);
+
+	/* Data from pixel repeater block */
+	if (hdmi_data->pix_repet_factor > 1) {
+		vp_conf = HDMI_VP_CONF_PR_EN_ENABLE |
+			  HDMI_VP_CONF_BYPASS_SELECT_PIX_REPEATER;
+	} else { /* data from packetizer block */
+		vp_conf = HDMI_VP_CONF_PR_EN_DISABLE |
+			  HDMI_VP_CONF_BYPASS_SELECT_VID_PACKETIZER;
+	}
+
+	hdmi_modb(hdmi, vp_conf,
+		  HDMI_VP_CONF_PR_EN_MASK |
+		  HDMI_VP_CONF_BYPASS_SELECT_MASK, HDMI_VP_CONF);
+
+	hdmi_modb(hdmi, 1 << HDMI_VP_STUFF_IDEFAULT_PHASE_OFFSET,
+		  HDMI_VP_STUFF_IDEFAULT_PHASE_MASK, HDMI_VP_STUFF);
+
+	hdmi_writeb(hdmi, remap_size, HDMI_VP_REMAP);
+
+	if (output_select == HDMI_VP_CONF_OUTPUT_SELECTOR_PP) {
+		vp_conf = HDMI_VP_CONF_BYPASS_EN_DISABLE |
+			  HDMI_VP_CONF_PP_EN_ENABLE |
+			  HDMI_VP_CONF_YCC422_EN_DISABLE;
+	} else if (output_select == HDMI_VP_CONF_OUTPUT_SELECTOR_YCC422) {
+		vp_conf = HDMI_VP_CONF_BYPASS_EN_DISABLE |
+			  HDMI_VP_CONF_PP_EN_DISABLE |
+			  HDMI_VP_CONF_YCC422_EN_ENABLE;
+	} else if (output_select == HDMI_VP_CONF_OUTPUT_SELECTOR_BYPASS) {
+		vp_conf = HDMI_VP_CONF_BYPASS_EN_ENABLE |
+			  HDMI_VP_CONF_PP_EN_DISABLE |
+			  HDMI_VP_CONF_YCC422_EN_DISABLE;
+	} else {
+		return;
+	}
+
+	hdmi_modb(hdmi, vp_conf,
+		  HDMI_VP_CONF_BYPASS_EN_MASK | HDMI_VP_CONF_PP_EN_ENMASK |
+		  HDMI_VP_CONF_YCC422_EN_MASK, HDMI_VP_CONF);
+
+	hdmi_modb(hdmi, HDMI_VP_STUFF_PP_STUFFING_STUFFING_MODE |
+			HDMI_VP_STUFF_YCC422_STUFFING_STUFFING_MODE,
+		  HDMI_VP_STUFF_PP_STUFFING_MASK |
+		  HDMI_VP_STUFF_YCC422_STUFFING_MASK, HDMI_VP_STUFF);
+
+	hdmi_modb(hdmi, output_select, HDMI_VP_CONF_OUTPUT_SELECTOR_MASK,
+		  HDMI_VP_CONF);
+}
+
+/* -----------------------------------------------------------------------------
+ * Synopsys PHY Handling
+ */
+
+static inline void hdmi_phy_test_clear(struct dw_hdmi *hdmi,
+				       unsigned char bit)
+{
+	hdmi_modb(hdmi, bit << HDMI_PHY_TST0_TSTCLR_OFFSET,
+		  HDMI_PHY_TST0_TSTCLR_MASK, HDMI_PHY_TST0);
+}
+
+static bool hdmi_phy_wait_i2c_done(struct dw_hdmi *hdmi, int msec)
+{
+	u32 val;
+
+	while ((val = hdmi_readb(hdmi, HDMI_IH_I2CMPHY_STAT0) & 0x3) == 0) {
+		if (msec-- == 0)
+			return false;
+		udelay(1000);
+	}
+	hdmi_writeb(hdmi, val, HDMI_IH_I2CMPHY_STAT0);
+
+	return true;
+}
+
+void dw_hdmi_phy_i2c_write(struct dw_hdmi *hdmi, unsigned short data,
+			   unsigned char addr)
+{
+	hdmi_writeb(hdmi, 0xFF, HDMI_IH_I2CMPHY_STAT0);
+	hdmi_writeb(hdmi, addr, HDMI_PHY_I2CM_ADDRESS_ADDR);
+	hdmi_writeb(hdmi, (unsigned char)(data >> 8),
+		    HDMI_PHY_I2CM_DATAO_1_ADDR);
+	hdmi_writeb(hdmi, (unsigned char)(data >> 0),
+		    HDMI_PHY_I2CM_DATAO_0_ADDR);
+	hdmi_writeb(hdmi, HDMI_PHY_I2CM_OPERATION_ADDR_WRITE,
+		    HDMI_PHY_I2CM_OPERATION_ADDR);
+	hdmi_phy_wait_i2c_done(hdmi, 1000);
+}
+EXPORT_SYMBOL_GPL(dw_hdmi_phy_i2c_write);
+
+static void dw_hdmi_phy_enable_powerdown(struct dw_hdmi *hdmi, bool enable)
+{
+	hdmi_mask_writeb(hdmi, !enable, HDMI_PHY_CONF0,
+			 HDMI_PHY_CONF0_PDZ_OFFSET,
+			 HDMI_PHY_CONF0_PDZ_MASK);
+}
+
+static void dw_hdmi_phy_enable_tmds(struct dw_hdmi *hdmi, u8 enable)
+{
+	hdmi_mask_writeb(hdmi, enable, HDMI_PHY_CONF0,
+			 HDMI_PHY_CONF0_ENTMDS_OFFSET,
+			 HDMI_PHY_CONF0_ENTMDS_MASK);
+}
+
+static void dw_hdmi_phy_enable_svsret(struct dw_hdmi *hdmi, u8 enable)
+{
+	hdmi_mask_writeb(hdmi, enable, HDMI_PHY_CONF0,
+			 HDMI_PHY_CONF0_SVSRET_OFFSET,
+			 HDMI_PHY_CONF0_SVSRET_MASK);
+}
+
+void dw_hdmi_phy_gen2_pddq(struct dw_hdmi *hdmi, u8 enable)
+{
+	hdmi_mask_writeb(hdmi, enable, HDMI_PHY_CONF0,
+			 HDMI_PHY_CONF0_GEN2_PDDQ_OFFSET,
+			 HDMI_PHY_CONF0_GEN2_PDDQ_MASK);
+}
+EXPORT_SYMBOL_GPL(dw_hdmi_phy_gen2_pddq);
+
+void dw_hdmi_phy_gen2_txpwron(struct dw_hdmi *hdmi, u8 enable)
+{
+	hdmi_mask_writeb(hdmi, enable, HDMI_PHY_CONF0,
+			 HDMI_PHY_CONF0_GEN2_TXPWRON_OFFSET,
+			 HDMI_PHY_CONF0_GEN2_TXPWRON_MASK);
+}
+EXPORT_SYMBOL_GPL(dw_hdmi_phy_gen2_txpwron);
+
+static void dw_hdmi_phy_sel_data_en_pol(struct dw_hdmi *hdmi, u8 enable)
+{
+	hdmi_mask_writeb(hdmi, enable, HDMI_PHY_CONF0,
+			 HDMI_PHY_CONF0_SELDATAENPOL_OFFSET,
+			 HDMI_PHY_CONF0_SELDATAENPOL_MASK);
+}
+
+static void dw_hdmi_phy_sel_interface_control(struct dw_hdmi *hdmi, u8 enable)
+{
+	hdmi_mask_writeb(hdmi, enable, HDMI_PHY_CONF0,
+			 HDMI_PHY_CONF0_SELDIPIF_OFFSET,
+			 HDMI_PHY_CONF0_SELDIPIF_MASK);
+}
+
+void dw_hdmi_phy_reset(struct dw_hdmi *hdmi)
+{
+	/* PHY reset. The reset signal is active high on Gen2 PHYs. */
+	hdmi_writeb(hdmi, HDMI_MC_PHYRSTZ_PHYRSTZ, HDMI_MC_PHYRSTZ);
+	hdmi_writeb(hdmi, 0, HDMI_MC_PHYRSTZ);
+}
+EXPORT_SYMBOL_GPL(dw_hdmi_phy_reset);
+
+void dw_hdmi_phy_i2c_set_addr(struct dw_hdmi *hdmi, u8 address)
+{
+	hdmi_phy_test_clear(hdmi, 1);
+	hdmi_writeb(hdmi, address, HDMI_PHY_I2CM_SLAVE_ADDR);
+	hdmi_phy_test_clear(hdmi, 0);
+}
+EXPORT_SYMBOL_GPL(dw_hdmi_phy_i2c_set_addr);
+
+static void dw_hdmi_phy_power_off(struct dw_hdmi *hdmi)
+{
+	const struct dw_hdmi_phy_data *phy = hdmi->phy.data;
+	unsigned int i;
+	u16 val;
+
+	if (phy->gen == 1) {
+		dw_hdmi_phy_enable_tmds(hdmi, 0);
+		dw_hdmi_phy_enable_powerdown(hdmi, true);
+		return;
+	}
+
+	dw_hdmi_phy_gen2_txpwron(hdmi, 0);
+
+	/*
+	 * Wait for TX_PHY_LOCK to be deasserted to indicate that the PHY went
+	 * to low power mode.
+	 */
+	for (i = 0; i < 5; ++i) {
+		val = hdmi_readb(hdmi, HDMI_PHY_STAT0);
+		if (!(val & HDMI_PHY_TX_PHY_LOCK))
+			break;
+
+		usleep_range(1000, 2000);
+	}
+
+	if (val & HDMI_PHY_TX_PHY_LOCK)
+		dev_warn(hdmi->dev, "PHY failed to power down\n");
+	else
+		dev_dbg(hdmi->dev, "PHY powered down in %u iterations\n", i);
+
+	dw_hdmi_phy_gen2_pddq(hdmi, 1);
+}
+
+static int dw_hdmi_phy_power_on(struct dw_hdmi *hdmi)
+{
+	const struct dw_hdmi_phy_data *phy = hdmi->phy.data;
+	unsigned int i;
+	u8 val;
+
+	if (phy->gen == 1) {
+		dw_hdmi_phy_enable_powerdown(hdmi, false);
+
+		/* Toggle TMDS enable. */
+		dw_hdmi_phy_enable_tmds(hdmi, 0);
+		dw_hdmi_phy_enable_tmds(hdmi, 1);
+		return 0;
+	}
+
+	dw_hdmi_phy_gen2_txpwron(hdmi, 1);
+	dw_hdmi_phy_gen2_pddq(hdmi, 0);
+
+	/* Wait for PHY PLL lock */
+	for (i = 0; i < 5; ++i) {
+		val = hdmi_readb(hdmi, HDMI_PHY_STAT0) & HDMI_PHY_TX_PHY_LOCK;
+		if (val)
+			break;
+
+		usleep_range(1000, 2000);
+	}
+
+	if (!val) {
+		dev_err(hdmi->dev, "PHY PLL failed to lock\n");
+		return -ETIMEDOUT;
+	}
+
+	dev_dbg(hdmi->dev, "PHY PLL locked %u iterations\n", i);
+	return 0;
+}
+
+/*
+ * PHY configuration function for the DWC HDMI 3D TX PHY. Based on the available
+ * information the DWC MHL PHY has the same register layout and is thus also
+ * supported by this function.
+ */
+static int hdmi_phy_configure_dwc_hdmi_3d_tx(struct dw_hdmi *hdmi,
+		const struct dw_hdmi_plat_data *pdata,
+		unsigned long mpixelclock)
+{
+	const struct dw_hdmi_mpll_config *mpll_config = pdata->mpll_cfg;
+	const struct dw_hdmi_curr_ctrl *curr_ctrl = pdata->cur_ctr;
+	const struct dw_hdmi_phy_config *phy_config = pdata->phy_config;
+
+	/* PLL/MPLL Cfg - always match on final entry */
+	for (; mpll_config->mpixelclock != ~0UL; mpll_config++)
+		if (mpixelclock <= mpll_config->mpixelclock)
+			break;
+
+	for (; curr_ctrl->mpixelclock != ~0UL; curr_ctrl++)
+		if (mpixelclock <= curr_ctrl->mpixelclock)
+			break;
+
+	for (; phy_config->mpixelclock != ~0UL; phy_config++)
+		if (mpixelclock <= phy_config->mpixelclock)
+			break;
+
+	if (mpll_config->mpixelclock == ~0UL ||
+	    curr_ctrl->mpixelclock == ~0UL ||
+	    phy_config->mpixelclock == ~0UL)
+		return -EINVAL;
+
+	dw_hdmi_phy_i2c_write(hdmi, mpll_config->res[0].cpce,
+			      HDMI_3D_TX_PHY_CPCE_CTRL);
+	dw_hdmi_phy_i2c_write(hdmi, mpll_config->res[0].gmp,
+			      HDMI_3D_TX_PHY_GMPCTRL);
+	dw_hdmi_phy_i2c_write(hdmi, curr_ctrl->curr[0],
+			      HDMI_3D_TX_PHY_CURRCTRL);
+
+	dw_hdmi_phy_i2c_write(hdmi, 0, HDMI_3D_TX_PHY_PLLPHBYCTRL);
+	dw_hdmi_phy_i2c_write(hdmi, HDMI_3D_TX_PHY_MSM_CTRL_CKO_SEL_FB_CLK,
+			      HDMI_3D_TX_PHY_MSM_CTRL);
+
+	dw_hdmi_phy_i2c_write(hdmi, phy_config->term, HDMI_3D_TX_PHY_TXTERM);
+	dw_hdmi_phy_i2c_write(hdmi, phy_config->sym_ctr,
+			      HDMI_3D_TX_PHY_CKSYMTXCTRL);
+	dw_hdmi_phy_i2c_write(hdmi, phy_config->vlev_ctr,
+			      HDMI_3D_TX_PHY_VLEVCTRL);
+
+	/* Override and disable clock termination. */
+	dw_hdmi_phy_i2c_write(hdmi, HDMI_3D_TX_PHY_CKCALCTRL_OVERRIDE,
+			      HDMI_3D_TX_PHY_CKCALCTRL);
+
+	return 0;
+}
+
+static int hdmi_phy_configure(struct dw_hdmi *hdmi)
+{
+	const struct dw_hdmi_phy_data *phy = hdmi->phy.data;
+	const struct dw_hdmi_plat_data *pdata = hdmi->plat_data;
+	unsigned long mpixelclock = hdmi->hdmi_data.video_mode.mpixelclock;
+	int ret;
+
+	dw_hdmi_phy_power_off(hdmi);
+
+	/* Leave low power consumption mode by asserting SVSRET. */
+	if (phy->has_svsret)
+		dw_hdmi_phy_enable_svsret(hdmi, 1);
+
+	dw_hdmi_phy_reset(hdmi);
+
+	hdmi_writeb(hdmi, HDMI_MC_HEACPHY_RST_ASSERT, HDMI_MC_HEACPHY_RST);
+
+	dw_hdmi_phy_i2c_set_addr(hdmi, HDMI_PHY_I2CM_SLAVE_ADDR_PHY_GEN2);
+
+	/* Write to the PHY as configured by the platform */
+	if (pdata->configure_phy)
+		ret = pdata->configure_phy(hdmi, pdata, mpixelclock);
+	else
+		ret = phy->configure(hdmi, pdata, mpixelclock);
+	if (ret) {
+		dev_err(hdmi->dev, "PHY configuration failed (clock %lu)\n",
+			mpixelclock);
+		return ret;
+	}
+
+	return dw_hdmi_phy_power_on(hdmi);
+}
+
+static int dw_hdmi_phy_init(struct dw_hdmi *hdmi, void *data,
+			    struct drm_display_mode *mode)
+{
+	int i, ret;
+
+	/* HDMI Phy spec says to do the phy initialization sequence twice */
+	for (i = 0; i < 2; i++) {
+		dw_hdmi_phy_sel_data_en_pol(hdmi, 1);
+		dw_hdmi_phy_sel_interface_control(hdmi, 0);
+
+		ret = hdmi_phy_configure(hdmi);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static void dw_hdmi_phy_disable(struct dw_hdmi *hdmi, void *data)
+{
+	dw_hdmi_phy_power_off(hdmi);
+}
+
+enum drm_connector_status dw_hdmi_phy_read_hpd(struct dw_hdmi *hdmi,
+					       void *data)
+{
+	return hdmi_readb(hdmi, HDMI_PHY_STAT0) & HDMI_PHY_HPD ?
+		connector_status_connected : connector_status_disconnected;
+}
+EXPORT_SYMBOL_GPL(dw_hdmi_phy_read_hpd);
+
+void dw_hdmi_phy_update_hpd(struct dw_hdmi *hdmi, void *data,
+			    bool force, bool disabled, bool rxsense)
+{
+	u8 old_mask = hdmi->phy_mask;
+
+	if (force || disabled || !rxsense)
+		hdmi->phy_mask |= HDMI_PHY_RX_SENSE;
+	else
+		hdmi->phy_mask &= ~HDMI_PHY_RX_SENSE;
+
+	if (old_mask != hdmi->phy_mask)
+		hdmi_writeb(hdmi, hdmi->phy_mask, HDMI_PHY_MASK0);
+}
+EXPORT_SYMBOL_GPL(dw_hdmi_phy_update_hpd);
+
+void dw_hdmi_phy_setup_hpd(struct dw_hdmi *hdmi, void *data)
+{
+	/*
+	 * Configure the PHY RX SENSE and HPD interrupts polarities and clear
+	 * any pending interrupt.
+	 */
+	hdmi_writeb(hdmi, HDMI_PHY_HPD | HDMI_PHY_RX_SENSE, HDMI_PHY_POL0);
+	hdmi_writeb(hdmi, HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE,
+		    HDMI_IH_PHY_STAT0);
+
+	/* Enable cable hot plug irq. */
+	hdmi_writeb(hdmi, hdmi->phy_mask, HDMI_PHY_MASK0);
+
+	/* Clear and unmute interrupts. */
+	hdmi_writeb(hdmi, HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE,
+		    HDMI_IH_PHY_STAT0);
+	hdmi_writeb(hdmi, ~(HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE),
+		    HDMI_IH_MUTE_PHY_STAT0);
+}
+EXPORT_SYMBOL_GPL(dw_hdmi_phy_setup_hpd);
+
+static const struct dw_hdmi_phy_ops dw_hdmi_synopsys_phy_ops = {
+	.init = dw_hdmi_phy_init,
+	.disable = dw_hdmi_phy_disable,
+	.read_hpd = dw_hdmi_phy_read_hpd,
+	.update_hpd = dw_hdmi_phy_update_hpd,
+	.setup_hpd = dw_hdmi_phy_setup_hpd,
+};
+
+/* -----------------------------------------------------------------------------
+ * HDMI TX Setup
+ */
+
+static void hdmi_tx_hdcp_config(struct dw_hdmi *hdmi)
+{
+	u8 de;
+
+	if (hdmi->hdmi_data.video_mode.mdataenablepolarity)
+		de = HDMI_A_VIDPOLCFG_DATAENPOL_ACTIVE_HIGH;
+	else
+		de = HDMI_A_VIDPOLCFG_DATAENPOL_ACTIVE_LOW;
+
+	/* disable rx detect */
+	hdmi_modb(hdmi, HDMI_A_HDCPCFG0_RXDETECT_DISABLE,
+		  HDMI_A_HDCPCFG0_RXDETECT_MASK, HDMI_A_HDCPCFG0);
+
+	hdmi_modb(hdmi, de, HDMI_A_VIDPOLCFG_DATAENPOL_MASK, HDMI_A_VIDPOLCFG);
+
+	hdmi_modb(hdmi, HDMI_A_HDCPCFG1_ENCRYPTIONDISABLE_DISABLE,
+		  HDMI_A_HDCPCFG1_ENCRYPTIONDISABLE_MASK, HDMI_A_HDCPCFG1);
+}
+
+static void hdmi_config_AVI(struct dw_hdmi *hdmi, struct drm_display_mode *mode)
+{
+	struct hdmi_avi_infoframe frame;
+	u8 val;
+
+	/* Initialise info frame from DRM mode */
+	drm_hdmi_avi_infoframe_from_display_mode(&frame, mode, false);
+
+	if (hdmi_bus_fmt_is_yuv444(hdmi->hdmi_data.enc_out_bus_format))
+		frame.colorspace = HDMI_COLORSPACE_YUV444;
+	else if (hdmi_bus_fmt_is_yuv422(hdmi->hdmi_data.enc_out_bus_format))
+		frame.colorspace = HDMI_COLORSPACE_YUV422;
+	else
+		frame.colorspace = HDMI_COLORSPACE_RGB;
+
+	/* Set up colorimetry */
+	if (!hdmi_bus_fmt_is_rgb(hdmi->hdmi_data.enc_out_bus_format)) {
+		switch (hdmi->hdmi_data.enc_out_encoding) {
+		case V4L2_YCBCR_ENC_601:
+			if (hdmi->hdmi_data.enc_in_encoding == V4L2_YCBCR_ENC_XV601)
+				frame.colorimetry = HDMI_COLORIMETRY_EXTENDED;
+			else
+				frame.colorimetry = HDMI_COLORIMETRY_ITU_601;
+			frame.extended_colorimetry =
+					HDMI_EXTENDED_COLORIMETRY_XV_YCC_601;
+			break;
+		case V4L2_YCBCR_ENC_709:
+			if (hdmi->hdmi_data.enc_in_encoding == V4L2_YCBCR_ENC_XV709)
+				frame.colorimetry = HDMI_COLORIMETRY_EXTENDED;
+			else
+				frame.colorimetry = HDMI_COLORIMETRY_ITU_709;
+			frame.extended_colorimetry =
+					HDMI_EXTENDED_COLORIMETRY_XV_YCC_709;
+			break;
+		default: /* Carries no data */
+			frame.colorimetry = HDMI_COLORIMETRY_ITU_601;
+			frame.extended_colorimetry =
+					HDMI_EXTENDED_COLORIMETRY_XV_YCC_601;
+			break;
+		}
+	} else {
+		frame.colorimetry = HDMI_COLORIMETRY_NONE;
+		frame.extended_colorimetry =
+			HDMI_EXTENDED_COLORIMETRY_XV_YCC_601;
+	}
+
+	frame.scan_mode = HDMI_SCAN_MODE_NONE;
+
+	/*
+	 * The Designware IP uses a different byte format from standard
+	 * AVI info frames, though generally the bits are in the correct
+	 * bytes.
+	 */
+
+	/*
+	 * AVI data byte 1 differences: Colorspace in bits 0,1 rather than 5,6,
+	 * scan info in bits 4,5 rather than 0,1 and active aspect present in
+	 * bit 6 rather than 4.
+	 */
+	val = (frame.scan_mode & 3) << 4 | (frame.colorspace & 3);
+	if (frame.active_aspect & 15)
+		val |= HDMI_FC_AVICONF0_ACTIVE_FMT_INFO_PRESENT;
+	if (frame.top_bar || frame.bottom_bar)
+		val |= HDMI_FC_AVICONF0_BAR_DATA_HORIZ_BAR;
+	if (frame.left_bar || frame.right_bar)
+		val |= HDMI_FC_AVICONF0_BAR_DATA_VERT_BAR;
+	hdmi_writeb(hdmi, val, HDMI_FC_AVICONF0);
+
+	/* AVI data byte 2 differences: none */
+	val = ((frame.colorimetry & 0x3) << 6) |
+	      ((frame.picture_aspect & 0x3) << 4) |
+	      (frame.active_aspect & 0xf);
+	hdmi_writeb(hdmi, val, HDMI_FC_AVICONF1);
+
+	/* AVI data byte 3 differences: none */
+	val = ((frame.extended_colorimetry & 0x7) << 4) |
+	      ((frame.quantization_range & 0x3) << 2) |
+	      (frame.nups & 0x3);
+	if (frame.itc)
+		val |= HDMI_FC_AVICONF2_IT_CONTENT_VALID;
+	hdmi_writeb(hdmi, val, HDMI_FC_AVICONF2);
+
+	/* AVI data byte 4 differences: none */
+	val = frame.video_code & 0x7f;
+	hdmi_writeb(hdmi, val, HDMI_FC_AVIVID);
+
+	/* AVI Data Byte 5- set up input and output pixel repetition */
+	val = (((hdmi->hdmi_data.video_mode.mpixelrepetitioninput + 1) <<
+		HDMI_FC_PRCONF_INCOMING_PR_FACTOR_OFFSET) &
+		HDMI_FC_PRCONF_INCOMING_PR_FACTOR_MASK) |
+		((hdmi->hdmi_data.video_mode.mpixelrepetitionoutput <<
+		HDMI_FC_PRCONF_OUTPUT_PR_FACTOR_OFFSET) &
+		HDMI_FC_PRCONF_OUTPUT_PR_FACTOR_MASK);
+	hdmi_writeb(hdmi, val, HDMI_FC_PRCONF);
+
+	/*
+	 * AVI data byte 5 differences: content type in 0,1 rather than 4,5,
+	 * ycc range in bits 2,3 rather than 6,7
+	 */
+	val = ((frame.ycc_quantization_range & 0x3) << 2) |
+	      (frame.content_type & 0x3);
+	hdmi_writeb(hdmi, val, HDMI_FC_AVICONF3);
+
+	/* AVI Data Bytes 6-13 */
+	hdmi_writeb(hdmi, frame.top_bar & 0xff, HDMI_FC_AVIETB0);
+	hdmi_writeb(hdmi, (frame.top_bar >> 8) & 0xff, HDMI_FC_AVIETB1);
+	hdmi_writeb(hdmi, frame.bottom_bar & 0xff, HDMI_FC_AVISBB0);
+	hdmi_writeb(hdmi, (frame.bottom_bar >> 8) & 0xff, HDMI_FC_AVISBB1);
+	hdmi_writeb(hdmi, frame.left_bar & 0xff, HDMI_FC_AVIELB0);
+	hdmi_writeb(hdmi, (frame.left_bar >> 8) & 0xff, HDMI_FC_AVIELB1);
+	hdmi_writeb(hdmi, frame.right_bar & 0xff, HDMI_FC_AVISRB0);
+	hdmi_writeb(hdmi, (frame.right_bar >> 8) & 0xff, HDMI_FC_AVISRB1);
+}
+
+static void hdmi_config_vendor_specific_infoframe(struct dw_hdmi *hdmi,
+						 struct drm_display_mode *mode)
+{
+	struct hdmi_vendor_infoframe frame;
+	u8 buffer[10];
+	ssize_t err;
+
+	err = drm_hdmi_vendor_infoframe_from_display_mode(&frame,
+							  &hdmi->connector,
+							  mode);
+	if (err < 0)
+		/*
+		 * Going into that statement does not means vendor infoframe
+		 * fails. It just informed us that vendor infoframe is not
+		 * needed for the selected mode. Only 4k or stereoscopic 3D
+		 * mode requires vendor infoframe. So just simply return.
+		 */
+		return;
+
+	err = hdmi_vendor_infoframe_pack(&frame, buffer, sizeof(buffer));
+	if (err < 0) {
+		dev_err(hdmi->dev, "Failed to pack vendor infoframe: %zd\n",
+			err);
+		return;
+	}
+	hdmi_mask_writeb(hdmi, 0, HDMI_FC_DATAUTO0, HDMI_FC_DATAUTO0_VSD_OFFSET,
+			HDMI_FC_DATAUTO0_VSD_MASK);
+
+	/* Set the length of HDMI vendor specific InfoFrame payload */
+	hdmi_writeb(hdmi, buffer[2], HDMI_FC_VSDSIZE);
+
+	/* Set 24bit IEEE Registration Identifier */
+	hdmi_writeb(hdmi, buffer[4], HDMI_FC_VSDIEEEID0);
+	hdmi_writeb(hdmi, buffer[5], HDMI_FC_VSDIEEEID1);
+	hdmi_writeb(hdmi, buffer[6], HDMI_FC_VSDIEEEID2);
+
+	/* Set HDMI_Video_Format and HDMI_VIC/3D_Structure */
+	hdmi_writeb(hdmi, buffer[7], HDMI_FC_VSDPAYLOAD0);
+	hdmi_writeb(hdmi, buffer[8], HDMI_FC_VSDPAYLOAD1);
+
+	if (frame.s3d_struct >= HDMI_3D_STRUCTURE_SIDE_BY_SIDE_HALF)
+		hdmi_writeb(hdmi, buffer[9], HDMI_FC_VSDPAYLOAD2);
+
+	/* Packet frame interpolation */
+	hdmi_writeb(hdmi, 1, HDMI_FC_DATAUTO1);
+
+	/* Auto packets per frame and line spacing */
+	hdmi_writeb(hdmi, 0x11, HDMI_FC_DATAUTO2);
+
+	/* Configures the Frame Composer On RDRB mode */
+	hdmi_mask_writeb(hdmi, 1, HDMI_FC_DATAUTO0, HDMI_FC_DATAUTO0_VSD_OFFSET,
+			HDMI_FC_DATAUTO0_VSD_MASK);
+}
+
+static void hdmi_av_composer(struct dw_hdmi *hdmi,
+			     const struct drm_display_mode *mode)
+{
+	u8 inv_val;
+	struct hdmi_vmode *vmode = &hdmi->hdmi_data.video_mode;
+	int hblank, vblank, h_de_hs, v_de_vs, hsync_len, vsync_len;
+	unsigned int vdisplay;
+
+	vmode->mpixelclock = mode->clock * 1000;
+
+	dev_dbg(hdmi->dev, "final pixclk = %d\n", vmode->mpixelclock);
+
+	/* Set up HDMI_FC_INVIDCONF */
+	inv_val = (hdmi->hdmi_data.hdcp_enable ?
+		HDMI_FC_INVIDCONF_HDCP_KEEPOUT_ACTIVE :
+		HDMI_FC_INVIDCONF_HDCP_KEEPOUT_INACTIVE);
+
+	inv_val |= mode->flags & DRM_MODE_FLAG_PVSYNC ?
+		HDMI_FC_INVIDCONF_VSYNC_IN_POLARITY_ACTIVE_HIGH :
+		HDMI_FC_INVIDCONF_VSYNC_IN_POLARITY_ACTIVE_LOW;
+
+	inv_val |= mode->flags & DRM_MODE_FLAG_PHSYNC ?
+		HDMI_FC_INVIDCONF_HSYNC_IN_POLARITY_ACTIVE_HIGH :
+		HDMI_FC_INVIDCONF_HSYNC_IN_POLARITY_ACTIVE_LOW;
+
+	inv_val |= (vmode->mdataenablepolarity ?
+		HDMI_FC_INVIDCONF_DE_IN_POLARITY_ACTIVE_HIGH :
+		HDMI_FC_INVIDCONF_DE_IN_POLARITY_ACTIVE_LOW);
+
+	if (hdmi->vic == 39)
+		inv_val |= HDMI_FC_INVIDCONF_R_V_BLANK_IN_OSC_ACTIVE_HIGH;
+	else
+		inv_val |= mode->flags & DRM_MODE_FLAG_INTERLACE ?
+			HDMI_FC_INVIDCONF_R_V_BLANK_IN_OSC_ACTIVE_HIGH :
+			HDMI_FC_INVIDCONF_R_V_BLANK_IN_OSC_ACTIVE_LOW;
+
+	inv_val |= mode->flags & DRM_MODE_FLAG_INTERLACE ?
+		HDMI_FC_INVIDCONF_IN_I_P_INTERLACED :
+		HDMI_FC_INVIDCONF_IN_I_P_PROGRESSIVE;
+
+	inv_val |= hdmi->sink_is_hdmi ?
+		HDMI_FC_INVIDCONF_DVI_MODEZ_HDMI_MODE :
+		HDMI_FC_INVIDCONF_DVI_MODEZ_DVI_MODE;
+
+	hdmi_writeb(hdmi, inv_val, HDMI_FC_INVIDCONF);
+
+	vdisplay = mode->vdisplay;
+	vblank = mode->vtotal - mode->vdisplay;
+	v_de_vs = mode->vsync_start - mode->vdisplay;
+	vsync_len = mode->vsync_end - mode->vsync_start;
+
+	/*
+	 * When we're setting an interlaced mode, we need
+	 * to adjust the vertical timing to suit.
+	 */
+	if (mode->flags & DRM_MODE_FLAG_INTERLACE) {
+		vdisplay /= 2;
+		vblank /= 2;
+		v_de_vs /= 2;
+		vsync_len /= 2;
+	}
+
+	/* Set up horizontal active pixel width */
+	hdmi_writeb(hdmi, mode->hdisplay >> 8, HDMI_FC_INHACTV1);
+	hdmi_writeb(hdmi, mode->hdisplay, HDMI_FC_INHACTV0);
+
+	/* Set up vertical active lines */
+	hdmi_writeb(hdmi, vdisplay >> 8, HDMI_FC_INVACTV1);
+	hdmi_writeb(hdmi, vdisplay, HDMI_FC_INVACTV0);
+
+	/* Set up horizontal blanking pixel region width */
+	hblank = mode->htotal - mode->hdisplay;
+	hdmi_writeb(hdmi, hblank >> 8, HDMI_FC_INHBLANK1);
+	hdmi_writeb(hdmi, hblank, HDMI_FC_INHBLANK0);
+
+	/* Set up vertical blanking pixel region width */
+	hdmi_writeb(hdmi, vblank, HDMI_FC_INVBLANK);
+
+	/* Set up HSYNC active edge delay width (in pixel clks) */
+	h_de_hs = mode->hsync_start - mode->hdisplay;
+	hdmi_writeb(hdmi, h_de_hs >> 8, HDMI_FC_HSYNCINDELAY1);
+	hdmi_writeb(hdmi, h_de_hs, HDMI_FC_HSYNCINDELAY0);
+
+	/* Set up VSYNC active edge delay (in lines) */
+	hdmi_writeb(hdmi, v_de_vs, HDMI_FC_VSYNCINDELAY);
+
+	/* Set up HSYNC active pulse width (in pixel clks) */
+	hsync_len = mode->hsync_end - mode->hsync_start;
+	hdmi_writeb(hdmi, hsync_len >> 8, HDMI_FC_HSYNCINWIDTH1);
+	hdmi_writeb(hdmi, hsync_len, HDMI_FC_HSYNCINWIDTH0);
+
+	/* Set up VSYNC active edge delay (in lines) */
+	hdmi_writeb(hdmi, vsync_len, HDMI_FC_VSYNCINWIDTH);
+}
+
+/* HDMI Initialization Step B.4 */
+static void dw_hdmi_enable_video_path(struct dw_hdmi *hdmi)
+{
+	/* control period minimum duration */
+	hdmi_writeb(hdmi, 12, HDMI_FC_CTRLDUR);
+	hdmi_writeb(hdmi, 32, HDMI_FC_EXCTRLDUR);
+	hdmi_writeb(hdmi, 1, HDMI_FC_EXCTRLSPAC);
+
+	/* Set to fill TMDS data channels */
+	hdmi_writeb(hdmi, 0x0B, HDMI_FC_CH0PREAM);
+	hdmi_writeb(hdmi, 0x16, HDMI_FC_CH1PREAM);
+	hdmi_writeb(hdmi, 0x21, HDMI_FC_CH2PREAM);
+
+	/* Enable pixel clock and tmds data path */
+	hdmi->mc_clkdis |= HDMI_MC_CLKDIS_HDCPCLK_DISABLE |
+			   HDMI_MC_CLKDIS_CSCCLK_DISABLE |
+			   HDMI_MC_CLKDIS_AUDCLK_DISABLE |
+			   HDMI_MC_CLKDIS_PREPCLK_DISABLE |
+			   HDMI_MC_CLKDIS_TMDSCLK_DISABLE;
+	hdmi->mc_clkdis &= ~HDMI_MC_CLKDIS_PIXELCLK_DISABLE;
+	hdmi_writeb(hdmi, hdmi->mc_clkdis, HDMI_MC_CLKDIS);
+
+	hdmi->mc_clkdis &= ~HDMI_MC_CLKDIS_TMDSCLK_DISABLE;
+	hdmi_writeb(hdmi, hdmi->mc_clkdis, HDMI_MC_CLKDIS);
+
+	/* Enable csc path */
+	if (is_color_space_conversion(hdmi)) {
+		hdmi->mc_clkdis &= ~HDMI_MC_CLKDIS_CSCCLK_DISABLE;
+		hdmi_writeb(hdmi, hdmi->mc_clkdis, HDMI_MC_CLKDIS);
+	}
+
+	/* Enable color space conversion if needed */
+	if (is_color_space_conversion(hdmi))
+		hdmi_writeb(hdmi, HDMI_MC_FLOWCTRL_FEED_THROUGH_OFF_CSC_IN_PATH,
+			    HDMI_MC_FLOWCTRL);
+	else
+		hdmi_writeb(hdmi, HDMI_MC_FLOWCTRL_FEED_THROUGH_OFF_CSC_BYPASS,
+			    HDMI_MC_FLOWCTRL);
+}
+
+/* Workaround to clear the overflow condition */
+static void dw_hdmi_clear_overflow(struct dw_hdmi *hdmi)
+{
+	unsigned int count;
+	unsigned int i;
+	u8 val;
+
+	/*
+	 * Under some circumstances the Frame Composer arithmetic unit can miss
+	 * an FC register write due to being busy processing the previous one.
+	 * The issue can be worked around by issuing a TMDS software reset and
+	 * then write one of the FC registers several times.
+	 *
+	 * The number of iterations matters and depends on the HDMI TX revision
+	 * (and possibly on the platform). So far i.MX6Q (v1.30a), i.MX6DL
+	 * (v1.31a) and multiple Allwinner SoCs (v1.32a) have been identified
+	 * as needing the workaround, with 4 iterations for v1.30a and 1
+	 * iteration for others.
+	 * The Amlogic Meson GX SoCs (v2.01a) have been identified as needing
+	 * the workaround with a single iteration.
+	 */
+
+	switch (hdmi->version) {
+	case 0x130a:
+		count = 4;
+		break;
+	case 0x131a:
+	case 0x132a:
+	case 0x201a:
+		count = 1;
+		break;
+	default:
+		return;
+	}
+
+	/* TMDS software reset */
+	hdmi_writeb(hdmi, (u8)~HDMI_MC_SWRSTZ_TMDSSWRST_REQ, HDMI_MC_SWRSTZ);
+
+	val = hdmi_readb(hdmi, HDMI_FC_INVIDCONF);
+	for (i = 0; i < count; i++)
+		hdmi_writeb(hdmi, val, HDMI_FC_INVIDCONF);
+}
+
+static void hdmi_disable_overflow_interrupts(struct dw_hdmi *hdmi)
+{
+	hdmi_writeb(hdmi, HDMI_IH_MUTE_FC_STAT2_OVERFLOW_MASK,
+		    HDMI_IH_MUTE_FC_STAT2);
+}
+
+static int dw_hdmi_setup(struct dw_hdmi *hdmi, struct drm_display_mode *mode)
+{
+	int ret;
+
+	hdmi_disable_overflow_interrupts(hdmi);
+
+	hdmi->vic = drm_match_cea_mode(mode);
+
+	if (!hdmi->vic) {
+		dev_dbg(hdmi->dev, "Non-CEA mode used in HDMI\n");
+	} else {
+		dev_dbg(hdmi->dev, "CEA mode used vic=%d\n", hdmi->vic);
+	}
+
+	if ((hdmi->vic == 6) || (hdmi->vic == 7) ||
+	    (hdmi->vic == 21) || (hdmi->vic == 22) ||
+	    (hdmi->vic == 2) || (hdmi->vic == 3) ||
+	    (hdmi->vic == 17) || (hdmi->vic == 18))
+		hdmi->hdmi_data.enc_out_encoding = V4L2_YCBCR_ENC_601;
+	else
+		hdmi->hdmi_data.enc_out_encoding = V4L2_YCBCR_ENC_709;
+
+	hdmi->hdmi_data.video_mode.mpixelrepetitionoutput = 0;
+	hdmi->hdmi_data.video_mode.mpixelrepetitioninput = 0;
+
+	/* TOFIX: Get input format from plat data or fallback to RGB888 */
+	if (hdmi->plat_data->input_bus_format)
+		hdmi->hdmi_data.enc_in_bus_format =
+			hdmi->plat_data->input_bus_format;
+	else
+		hdmi->hdmi_data.enc_in_bus_format = MEDIA_BUS_FMT_RGB888_1X24;
+
+	/* TOFIX: Get input encoding from plat data or fallback to none */
+	if (hdmi->plat_data->input_bus_encoding)
+		hdmi->hdmi_data.enc_in_encoding =
+			hdmi->plat_data->input_bus_encoding;
+	else
+		hdmi->hdmi_data.enc_in_encoding = V4L2_YCBCR_ENC_DEFAULT;
+
+	/* TOFIX: Default to RGB888 output format */
+	hdmi->hdmi_data.enc_out_bus_format = MEDIA_BUS_FMT_RGB888_1X24;
+
+	hdmi->hdmi_data.pix_repet_factor = 0;
+	hdmi->hdmi_data.hdcp_enable = 0;
+	hdmi->hdmi_data.video_mode.mdataenablepolarity = true;
+
+	/* HDMI Initialization Step B.1 */
+	hdmi_av_composer(hdmi, mode);
+
+	/* HDMI Initializateion Step B.2 */
+	ret = hdmi->phy.ops->init(hdmi, hdmi->phy.data, &hdmi->previous_mode);
+	if (ret)
+		return ret;
+	hdmi->phy.enabled = true;
+
+	/* HDMI Initialization Step B.3 */
+	dw_hdmi_enable_video_path(hdmi);
+
+	if (hdmi->sink_has_audio) {
+		dev_dbg(hdmi->dev, "sink has audio support\n");
+
+		/* HDMI Initialization Step E - Configure audio */
+		hdmi_clk_regenerator_update_pixel_clock(hdmi);
+		hdmi_enable_audio_clk(hdmi, hdmi->audio_enable);
+	}
+
+	/* not for DVI mode */
+	if (hdmi->sink_is_hdmi) {
+		dev_dbg(hdmi->dev, "%s HDMI mode\n", __func__);
+
+		/* HDMI Initialization Step F - Configure AVI InfoFrame */
+		hdmi_config_AVI(hdmi, mode);
+		hdmi_config_vendor_specific_infoframe(hdmi, mode);
+	} else {
+		dev_dbg(hdmi->dev, "%s DVI mode\n", __func__);
+	}
+
+	hdmi_video_packetize(hdmi);
+	hdmi_video_csc(hdmi);
+	hdmi_video_sample(hdmi);
+	hdmi_tx_hdcp_config(hdmi);
+
+	dw_hdmi_clear_overflow(hdmi);
+
+	return 0;
+}
+
+static void dw_hdmi_setup_i2c(struct dw_hdmi *hdmi)
+{
+	hdmi_writeb(hdmi, HDMI_PHY_I2CM_INT_ADDR_DONE_POL,
+		    HDMI_PHY_I2CM_INT_ADDR);
+
+	hdmi_writeb(hdmi, HDMI_PHY_I2CM_CTLINT_ADDR_NAC_POL |
+		    HDMI_PHY_I2CM_CTLINT_ADDR_ARBITRATION_POL,
+		    HDMI_PHY_I2CM_CTLINT_ADDR);
+}
+
+static void initialize_hdmi_ih_mutes(struct dw_hdmi *hdmi)
+{
+	u8 ih_mute;
+
+	/*
+	 * Boot up defaults are:
+	 * HDMI_IH_MUTE   = 0x03 (disabled)
+	 * HDMI_IH_MUTE_* = 0x00 (enabled)
+	 *
+	 * Disable top level interrupt bits in HDMI block
+	 */
+	ih_mute = hdmi_readb(hdmi, HDMI_IH_MUTE) |
+		  HDMI_IH_MUTE_MUTE_WAKEUP_INTERRUPT |
+		  HDMI_IH_MUTE_MUTE_ALL_INTERRUPT;
+
+	hdmi_writeb(hdmi, ih_mute, HDMI_IH_MUTE);
+
+	/* by default mask all interrupts */
+	hdmi_writeb(hdmi, 0xff, HDMI_VP_MASK);
+	hdmi_writeb(hdmi, 0xff, HDMI_FC_MASK0);
+	hdmi_writeb(hdmi, 0xff, HDMI_FC_MASK1);
+	hdmi_writeb(hdmi, 0xff, HDMI_FC_MASK2);
+	hdmi_writeb(hdmi, 0xff, HDMI_PHY_MASK0);
+	hdmi_writeb(hdmi, 0xff, HDMI_PHY_I2CM_INT_ADDR);
+	hdmi_writeb(hdmi, 0xff, HDMI_PHY_I2CM_CTLINT_ADDR);
+	hdmi_writeb(hdmi, 0xff, HDMI_AUD_INT);
+	hdmi_writeb(hdmi, 0xff, HDMI_AUD_SPDIFINT);
+	hdmi_writeb(hdmi, 0xff, HDMI_AUD_HBR_MASK);
+	hdmi_writeb(hdmi, 0xff, HDMI_GP_MASK);
+	hdmi_writeb(hdmi, 0xff, HDMI_A_APIINTMSK);
+	hdmi_writeb(hdmi, 0xff, HDMI_I2CM_INT);
+	hdmi_writeb(hdmi, 0xff, HDMI_I2CM_CTLINT);
+
+	/* Disable interrupts in the IH_MUTE_* registers */
+	hdmi_writeb(hdmi, 0xff, HDMI_IH_MUTE_FC_STAT0);
+	hdmi_writeb(hdmi, 0xff, HDMI_IH_MUTE_FC_STAT1);
+	hdmi_writeb(hdmi, 0xff, HDMI_IH_MUTE_FC_STAT2);
+	hdmi_writeb(hdmi, 0xff, HDMI_IH_MUTE_AS_STAT0);
+	hdmi_writeb(hdmi, 0xff, HDMI_IH_MUTE_PHY_STAT0);
+	hdmi_writeb(hdmi, 0xff, HDMI_IH_MUTE_I2CM_STAT0);
+	hdmi_writeb(hdmi, 0xff, HDMI_IH_MUTE_CEC_STAT0);
+	hdmi_writeb(hdmi, 0xff, HDMI_IH_MUTE_VP_STAT0);
+	hdmi_writeb(hdmi, 0xff, HDMI_IH_MUTE_I2CMPHY_STAT0);
+	hdmi_writeb(hdmi, 0xff, HDMI_IH_MUTE_AHBDMAAUD_STAT0);
+
+	/* Enable top level interrupt bits in HDMI block */
+	ih_mute &= ~(HDMI_IH_MUTE_MUTE_WAKEUP_INTERRUPT |
+		    HDMI_IH_MUTE_MUTE_ALL_INTERRUPT);
+	hdmi_writeb(hdmi, ih_mute, HDMI_IH_MUTE);
+}
+
+static void dw_hdmi_poweron(struct dw_hdmi *hdmi)
+{
+	hdmi->bridge_is_on = true;
+	dw_hdmi_setup(hdmi, &hdmi->previous_mode);
+}
+
+static void dw_hdmi_poweroff(struct dw_hdmi *hdmi)
+{
+	if (hdmi->phy.enabled) {
+		hdmi->phy.ops->disable(hdmi, hdmi->phy.data);
+		hdmi->phy.enabled = false;
+	}
+
+	hdmi->bridge_is_on = false;
+}
+
+static void dw_hdmi_update_power(struct dw_hdmi *hdmi)
+{
+	int force = hdmi->force;
+
+	if (hdmi->disabled) {
+		force = DRM_FORCE_OFF;
+	} else if (force == DRM_FORCE_UNSPECIFIED) {
+		if (hdmi->rxsense)
+			force = DRM_FORCE_ON;
+		else
+			force = DRM_FORCE_OFF;
+	}
+
+	if (force == DRM_FORCE_OFF) {
+		if (hdmi->bridge_is_on)
+			dw_hdmi_poweroff(hdmi);
+	} else {
+		if (!hdmi->bridge_is_on)
+			dw_hdmi_poweron(hdmi);
+	}
+}
+
+/*
+ * Adjust the detection of RXSENSE according to whether we have a forced
+ * connection mode enabled, or whether we have been disabled.  There is
+ * no point processing RXSENSE interrupts if we have a forced connection
+ * state, or DRM has us disabled.
+ *
+ * We also disable rxsense interrupts when we think we're disconnected
+ * to avoid floating TDMS signals giving false rxsense interrupts.
+ *
+ * Note: we still need to listen for HPD interrupts even when DRM has us
+ * disabled so that we can detect a connect event.
+ */
+static void dw_hdmi_update_phy_mask(struct dw_hdmi *hdmi)
+{
+	if (hdmi->phy.ops->update_hpd)
+		hdmi->phy.ops->update_hpd(hdmi, hdmi->phy.data,
+					  hdmi->force, hdmi->disabled,
+					  hdmi->rxsense);
+}
+
+static enum drm_connector_status
+dw_hdmi_connector_detect(struct drm_connector *connector, bool force)
+{
+	struct dw_hdmi *hdmi = container_of(connector, struct dw_hdmi,
+					     connector);
+
+	mutex_lock(&hdmi->mutex);
+	hdmi->force = DRM_FORCE_UNSPECIFIED;
+	dw_hdmi_update_power(hdmi);
+	dw_hdmi_update_phy_mask(hdmi);
+	mutex_unlock(&hdmi->mutex);
+
+	return hdmi->phy.ops->read_hpd(hdmi, hdmi->phy.data);
+}
+
+static int dw_hdmi_connector_get_modes(struct drm_connector *connector)
+{
+	struct dw_hdmi *hdmi = container_of(connector, struct dw_hdmi,
+					     connector);
+	struct edid *edid;
+	int ret = 0;
+
+	if (!hdmi->ddc)
+		return 0;
+
+	edid = drm_get_edid(connector, hdmi->ddc);
+	if (edid) {
+		dev_dbg(hdmi->dev, "got edid: width[%d] x height[%d]\n",
+			edid->width_cm, edid->height_cm);
+
+		hdmi->sink_is_hdmi = drm_detect_hdmi_monitor(edid);
+		hdmi->sink_has_audio = drm_detect_monitor_audio(edid);
+		drm_connector_update_edid_property(connector, edid);
+		cec_notifier_set_phys_addr_from_edid(hdmi->cec_notifier, edid);
+		ret = drm_add_edid_modes(connector, edid);
+		kfree(edid);
+	} else {
+		dev_dbg(hdmi->dev, "failed to get edid\n");
+	}
+
+	return ret;
+}
+
+static void dw_hdmi_connector_force(struct drm_connector *connector)
+{
+	struct dw_hdmi *hdmi = container_of(connector, struct dw_hdmi,
+					     connector);
+
+	mutex_lock(&hdmi->mutex);
+	hdmi->force = connector->force;
+	dw_hdmi_update_power(hdmi);
+	dw_hdmi_update_phy_mask(hdmi);
+	mutex_unlock(&hdmi->mutex);
+}
+
+static const struct drm_connector_funcs dw_hdmi_connector_funcs = {
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.detect = dw_hdmi_connector_detect,
+	.destroy = drm_connector_cleanup,
+	.force = dw_hdmi_connector_force,
+	.reset = drm_atomic_helper_connector_reset,
+	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static const struct drm_connector_helper_funcs dw_hdmi_connector_helper_funcs = {
+	.get_modes = dw_hdmi_connector_get_modes,
+	.best_encoder = drm_atomic_helper_best_encoder,
+};
+
+static int dw_hdmi_bridge_attach(struct drm_bridge *bridge)
+{
+	struct dw_hdmi *hdmi = bridge->driver_private;
+	struct drm_encoder *encoder = bridge->encoder;
+	struct drm_connector *connector = &hdmi->connector;
+
+	connector->interlace_allowed = 1;
+	connector->polled = DRM_CONNECTOR_POLL_HPD;
+
+	drm_connector_helper_add(connector, &dw_hdmi_connector_helper_funcs);
+
+	drm_connector_init(bridge->dev, connector, &dw_hdmi_connector_funcs,
+			   DRM_MODE_CONNECTOR_HDMIA);
+
+	drm_connector_attach_encoder(connector, encoder);
+
+	return 0;
+}
+
+static enum drm_mode_status
+dw_hdmi_bridge_mode_valid(struct drm_bridge *bridge,
+			  const struct drm_display_mode *mode)
+{
+	struct dw_hdmi *hdmi = bridge->driver_private;
+	struct drm_connector *connector = &hdmi->connector;
+	enum drm_mode_status mode_status = MODE_OK;
+
+	/* We don't support double-clocked modes */
+	if (mode->flags & DRM_MODE_FLAG_DBLCLK)
+		return MODE_BAD;
+
+	if (hdmi->plat_data->mode_valid)
+		mode_status = hdmi->plat_data->mode_valid(connector, mode);
+
+	return mode_status;
+}
+
+static void dw_hdmi_bridge_mode_set(struct drm_bridge *bridge,
+				    struct drm_display_mode *orig_mode,
+				    struct drm_display_mode *mode)
+{
+	struct dw_hdmi *hdmi = bridge->driver_private;
+
+	mutex_lock(&hdmi->mutex);
+
+	/* Store the display mode for plugin/DKMS poweron events */
+	memcpy(&hdmi->previous_mode, mode, sizeof(hdmi->previous_mode));
+
+	mutex_unlock(&hdmi->mutex);
+}
+
+static void dw_hdmi_bridge_disable(struct drm_bridge *bridge)
+{
+	struct dw_hdmi *hdmi = bridge->driver_private;
+
+	mutex_lock(&hdmi->mutex);
+	hdmi->disabled = true;
+	dw_hdmi_update_power(hdmi);
+	dw_hdmi_update_phy_mask(hdmi);
+	mutex_unlock(&hdmi->mutex);
+}
+
+static void dw_hdmi_bridge_enable(struct drm_bridge *bridge)
+{
+	struct dw_hdmi *hdmi = bridge->driver_private;
+
+	mutex_lock(&hdmi->mutex);
+	hdmi->disabled = false;
+	dw_hdmi_update_power(hdmi);
+	dw_hdmi_update_phy_mask(hdmi);
+	mutex_unlock(&hdmi->mutex);
+}
+
+static const struct drm_bridge_funcs dw_hdmi_bridge_funcs = {
+	.attach = dw_hdmi_bridge_attach,
+	.enable = dw_hdmi_bridge_enable,
+	.disable = dw_hdmi_bridge_disable,
+	.mode_set = dw_hdmi_bridge_mode_set,
+	.mode_valid = dw_hdmi_bridge_mode_valid,
+};
+
+static irqreturn_t dw_hdmi_i2c_irq(struct dw_hdmi *hdmi)
+{
+	struct dw_hdmi_i2c *i2c = hdmi->i2c;
+	unsigned int stat;
+
+	stat = hdmi_readb(hdmi, HDMI_IH_I2CM_STAT0);
+	if (!stat)
+		return IRQ_NONE;
+
+	hdmi_writeb(hdmi, stat, HDMI_IH_I2CM_STAT0);
+
+	i2c->stat = stat;
+
+	complete(&i2c->cmp);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t dw_hdmi_hardirq(int irq, void *dev_id)
+{
+	struct dw_hdmi *hdmi = dev_id;
+	u8 intr_stat;
+	irqreturn_t ret = IRQ_NONE;
+
+	if (hdmi->i2c)
+		ret = dw_hdmi_i2c_irq(hdmi);
+
+	intr_stat = hdmi_readb(hdmi, HDMI_IH_PHY_STAT0);
+	if (intr_stat) {
+		hdmi_writeb(hdmi, ~0, HDMI_IH_MUTE_PHY_STAT0);
+		return IRQ_WAKE_THREAD;
+	}
+
+	return ret;
+}
+
+void dw_hdmi_setup_rx_sense(struct dw_hdmi *hdmi, bool hpd, bool rx_sense)
+{
+	mutex_lock(&hdmi->mutex);
+
+	if (!hdmi->force) {
+		/*
+		 * If the RX sense status indicates we're disconnected,
+		 * clear the software rxsense status.
+		 */
+		if (!rx_sense)
+			hdmi->rxsense = false;
+
+		/*
+		 * Only set the software rxsense status when both
+		 * rxsense and hpd indicates we're connected.
+		 * This avoids what seems to be bad behaviour in
+		 * at least iMX6S versions of the phy.
+		 */
+		if (hpd)
+			hdmi->rxsense = true;
+
+		dw_hdmi_update_power(hdmi);
+		dw_hdmi_update_phy_mask(hdmi);
+	}
+	mutex_unlock(&hdmi->mutex);
+}
+EXPORT_SYMBOL_GPL(dw_hdmi_setup_rx_sense);
+
+static irqreturn_t dw_hdmi_irq(int irq, void *dev_id)
+{
+	struct dw_hdmi *hdmi = dev_id;
+	u8 intr_stat, phy_int_pol, phy_pol_mask, phy_stat;
+
+	intr_stat = hdmi_readb(hdmi, HDMI_IH_PHY_STAT0);
+	phy_int_pol = hdmi_readb(hdmi, HDMI_PHY_POL0);
+	phy_stat = hdmi_readb(hdmi, HDMI_PHY_STAT0);
+
+	phy_pol_mask = 0;
+	if (intr_stat & HDMI_IH_PHY_STAT0_HPD)
+		phy_pol_mask |= HDMI_PHY_HPD;
+	if (intr_stat & HDMI_IH_PHY_STAT0_RX_SENSE0)
+		phy_pol_mask |= HDMI_PHY_RX_SENSE0;
+	if (intr_stat & HDMI_IH_PHY_STAT0_RX_SENSE1)
+		phy_pol_mask |= HDMI_PHY_RX_SENSE1;
+	if (intr_stat & HDMI_IH_PHY_STAT0_RX_SENSE2)
+		phy_pol_mask |= HDMI_PHY_RX_SENSE2;
+	if (intr_stat & HDMI_IH_PHY_STAT0_RX_SENSE3)
+		phy_pol_mask |= HDMI_PHY_RX_SENSE3;
+
+	if (phy_pol_mask)
+		hdmi_modb(hdmi, ~phy_int_pol, phy_pol_mask, HDMI_PHY_POL0);
+
+	/*
+	 * RX sense tells us whether the TDMS transmitters are detecting
+	 * load - in other words, there's something listening on the
+	 * other end of the link.  Use this to decide whether we should
+	 * power on the phy as HPD may be toggled by the sink to merely
+	 * ask the source to re-read the EDID.
+	 */
+	if (intr_stat &
+	    (HDMI_IH_PHY_STAT0_RX_SENSE | HDMI_IH_PHY_STAT0_HPD)) {
+		dw_hdmi_setup_rx_sense(hdmi,
+				       phy_stat & HDMI_PHY_HPD,
+				       phy_stat & HDMI_PHY_RX_SENSE);
+
+		if ((phy_stat & (HDMI_PHY_RX_SENSE | HDMI_PHY_HPD)) == 0)
+			cec_notifier_set_phys_addr(hdmi->cec_notifier,
+						   CEC_PHYS_ADDR_INVALID);
+	}
+
+	if (intr_stat & HDMI_IH_PHY_STAT0_HPD) {
+		dev_dbg(hdmi->dev, "EVENT=%s\n",
+			phy_int_pol & HDMI_PHY_HPD ? "plugin" : "plugout");
+		if (hdmi->bridge.dev)
+			drm_helper_hpd_irq_event(hdmi->bridge.dev);
+	}
+
+	hdmi_writeb(hdmi, intr_stat, HDMI_IH_PHY_STAT0);
+	hdmi_writeb(hdmi, ~(HDMI_IH_PHY_STAT0_HPD | HDMI_IH_PHY_STAT0_RX_SENSE),
+		    HDMI_IH_MUTE_PHY_STAT0);
+
+	return IRQ_HANDLED;
+}
+
+static const struct dw_hdmi_phy_data dw_hdmi_phys[] = {
+	{
+		.type = DW_HDMI_PHY_DWC_HDMI_TX_PHY,
+		.name = "DWC HDMI TX PHY",
+		.gen = 1,
+	}, {
+		.type = DW_HDMI_PHY_DWC_MHL_PHY_HEAC,
+		.name = "DWC MHL PHY + HEAC PHY",
+		.gen = 2,
+		.has_svsret = true,
+		.configure = hdmi_phy_configure_dwc_hdmi_3d_tx,
+	}, {
+		.type = DW_HDMI_PHY_DWC_MHL_PHY,
+		.name = "DWC MHL PHY",
+		.gen = 2,
+		.has_svsret = true,
+		.configure = hdmi_phy_configure_dwc_hdmi_3d_tx,
+	}, {
+		.type = DW_HDMI_PHY_DWC_HDMI_3D_TX_PHY_HEAC,
+		.name = "DWC HDMI 3D TX PHY + HEAC PHY",
+		.gen = 2,
+		.configure = hdmi_phy_configure_dwc_hdmi_3d_tx,
+	}, {
+		.type = DW_HDMI_PHY_DWC_HDMI_3D_TX_PHY,
+		.name = "DWC HDMI 3D TX PHY",
+		.gen = 2,
+		.configure = hdmi_phy_configure_dwc_hdmi_3d_tx,
+	}, {
+		.type = DW_HDMI_PHY_DWC_HDMI20_TX_PHY,
+		.name = "DWC HDMI 2.0 TX PHY",
+		.gen = 2,
+		.has_svsret = true,
+		.configure = hdmi_phy_configure_dwc_hdmi_3d_tx,
+	}, {
+		.type = DW_HDMI_PHY_VENDOR_PHY,
+		.name = "Vendor PHY",
+	}
+};
+
+static int dw_hdmi_detect_phy(struct dw_hdmi *hdmi)
+{
+	unsigned int i;
+	u8 phy_type;
+
+	phy_type = hdmi_readb(hdmi, HDMI_CONFIG2_ID);
+
+	if (phy_type == DW_HDMI_PHY_VENDOR_PHY) {
+		/* Vendor PHYs require support from the glue layer. */
+		if (!hdmi->plat_data->phy_ops || !hdmi->plat_data->phy_name) {
+			dev_err(hdmi->dev,
+				"Vendor HDMI PHY not supported by glue layer\n");
+			return -ENODEV;
+		}
+
+		hdmi->phy.ops = hdmi->plat_data->phy_ops;
+		hdmi->phy.data = hdmi->plat_data->phy_data;
+		hdmi->phy.name = hdmi->plat_data->phy_name;
+		return 0;
+	}
+
+	/* Synopsys PHYs are handled internally. */
+	for (i = 0; i < ARRAY_SIZE(dw_hdmi_phys); ++i) {
+		if (dw_hdmi_phys[i].type == phy_type) {
+			hdmi->phy.ops = &dw_hdmi_synopsys_phy_ops;
+			hdmi->phy.name = dw_hdmi_phys[i].name;
+			hdmi->phy.data = (void *)&dw_hdmi_phys[i];
+
+			if (!dw_hdmi_phys[i].configure &&
+			    !hdmi->plat_data->configure_phy) {
+				dev_err(hdmi->dev, "%s requires platform support\n",
+					hdmi->phy.name);
+				return -ENODEV;
+			}
+
+			return 0;
+		}
+	}
+
+	dev_err(hdmi->dev, "Unsupported HDMI PHY type (%02x)\n", phy_type);
+	return -ENODEV;
+}
+
+static void dw_hdmi_cec_enable(struct dw_hdmi *hdmi)
+{
+	mutex_lock(&hdmi->mutex);
+	hdmi->mc_clkdis &= ~HDMI_MC_CLKDIS_CECCLK_DISABLE;
+	hdmi_writeb(hdmi, hdmi->mc_clkdis, HDMI_MC_CLKDIS);
+	mutex_unlock(&hdmi->mutex);
+}
+
+static void dw_hdmi_cec_disable(struct dw_hdmi *hdmi)
+{
+	mutex_lock(&hdmi->mutex);
+	hdmi->mc_clkdis |= HDMI_MC_CLKDIS_CECCLK_DISABLE;
+	hdmi_writeb(hdmi, hdmi->mc_clkdis, HDMI_MC_CLKDIS);
+	mutex_unlock(&hdmi->mutex);
+}
+
+static const struct dw_hdmi_cec_ops dw_hdmi_cec_ops = {
+	.write = hdmi_writeb,
+	.read = hdmi_readb,
+	.enable = dw_hdmi_cec_enable,
+	.disable = dw_hdmi_cec_disable,
+};
+
+static const struct regmap_config hdmi_regmap_8bit_config = {
+	.reg_bits	= 32,
+	.val_bits	= 8,
+	.reg_stride	= 1,
+	.max_register	= HDMI_I2CM_FS_SCL_LCNT_0_ADDR,
+};
+
+static const struct regmap_config hdmi_regmap_32bit_config = {
+	.reg_bits	= 32,
+	.val_bits	= 32,
+	.reg_stride	= 4,
+	.max_register	= HDMI_I2CM_FS_SCL_LCNT_0_ADDR << 2,
+};
+
+static struct dw_hdmi *
+__dw_hdmi_probe(struct platform_device *pdev,
+		const struct dw_hdmi_plat_data *plat_data)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct platform_device_info pdevinfo;
+	struct device_node *ddc_node;
+	struct dw_hdmi_cec_data cec;
+	struct dw_hdmi *hdmi;
+	struct resource *iores = NULL;
+	int irq;
+	int ret;
+	u32 val = 1;
+	u8 prod_id0;
+	u8 prod_id1;
+	u8 config0;
+	u8 config3;
+
+	hdmi = devm_kzalloc(dev, sizeof(*hdmi), GFP_KERNEL);
+	if (!hdmi)
+		return ERR_PTR(-ENOMEM);
+
+	hdmi->plat_data = plat_data;
+	hdmi->dev = dev;
+	hdmi->sample_rate = 48000;
+	hdmi->disabled = true;
+	hdmi->rxsense = true;
+	hdmi->phy_mask = (u8)~(HDMI_PHY_HPD | HDMI_PHY_RX_SENSE);
+	hdmi->mc_clkdis = 0x7f;
+
+	mutex_init(&hdmi->mutex);
+	mutex_init(&hdmi->audio_mutex);
+	spin_lock_init(&hdmi->audio_lock);
+
+	ddc_node = of_parse_phandle(np, "ddc-i2c-bus", 0);
+	if (ddc_node) {
+		hdmi->ddc = of_get_i2c_adapter_by_node(ddc_node);
+		of_node_put(ddc_node);
+		if (!hdmi->ddc) {
+			dev_dbg(hdmi->dev, "failed to read ddc node\n");
+			return ERR_PTR(-EPROBE_DEFER);
+		}
+
+	} else {
+		dev_dbg(hdmi->dev, "no ddc property found\n");
+	}
+
+	if (!plat_data->regm) {
+		const struct regmap_config *reg_config;
+
+		of_property_read_u32(np, "reg-io-width", &val);
+		switch (val) {
+		case 4:
+			reg_config = &hdmi_regmap_32bit_config;
+			hdmi->reg_shift = 2;
+			break;
+		case 1:
+			reg_config = &hdmi_regmap_8bit_config;
+			break;
+		default:
+			dev_err(dev, "reg-io-width must be 1 or 4\n");
+			return ERR_PTR(-EINVAL);
+		}
+
+		iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+		hdmi->regs = devm_ioremap_resource(dev, iores);
+		if (IS_ERR(hdmi->regs)) {
+			ret = PTR_ERR(hdmi->regs);
+			goto err_res;
+		}
+
+		hdmi->regm = devm_regmap_init_mmio(dev, hdmi->regs, reg_config);
+		if (IS_ERR(hdmi->regm)) {
+			dev_err(dev, "Failed to configure regmap\n");
+			ret = PTR_ERR(hdmi->regm);
+			goto err_res;
+		}
+	} else {
+		hdmi->regm = plat_data->regm;
+	}
+
+	hdmi->isfr_clk = devm_clk_get(hdmi->dev, "isfr");
+	if (IS_ERR(hdmi->isfr_clk)) {
+		ret = PTR_ERR(hdmi->isfr_clk);
+		dev_err(hdmi->dev, "Unable to get HDMI isfr clk: %d\n", ret);
+		goto err_res;
+	}
+
+	ret = clk_prepare_enable(hdmi->isfr_clk);
+	if (ret) {
+		dev_err(hdmi->dev, "Cannot enable HDMI isfr clock: %d\n", ret);
+		goto err_res;
+	}
+
+	hdmi->iahb_clk = devm_clk_get(hdmi->dev, "iahb");
+	if (IS_ERR(hdmi->iahb_clk)) {
+		ret = PTR_ERR(hdmi->iahb_clk);
+		dev_err(hdmi->dev, "Unable to get HDMI iahb clk: %d\n", ret);
+		goto err_isfr;
+	}
+
+	ret = clk_prepare_enable(hdmi->iahb_clk);
+	if (ret) {
+		dev_err(hdmi->dev, "Cannot enable HDMI iahb clock: %d\n", ret);
+		goto err_isfr;
+	}
+
+	hdmi->cec_clk = devm_clk_get(hdmi->dev, "cec");
+	if (PTR_ERR(hdmi->cec_clk) == -ENOENT) {
+		hdmi->cec_clk = NULL;
+	} else if (IS_ERR(hdmi->cec_clk)) {
+		ret = PTR_ERR(hdmi->cec_clk);
+		if (ret != -EPROBE_DEFER)
+			dev_err(hdmi->dev, "Cannot get HDMI cec clock: %d\n",
+				ret);
+
+		hdmi->cec_clk = NULL;
+		goto err_iahb;
+	} else {
+		ret = clk_prepare_enable(hdmi->cec_clk);
+		if (ret) {
+			dev_err(hdmi->dev, "Cannot enable HDMI cec clock: %d\n",
+				ret);
+			goto err_iahb;
+		}
+	}
+
+	/* Product and revision IDs */
+	hdmi->version = (hdmi_readb(hdmi, HDMI_DESIGN_ID) << 8)
+		      | (hdmi_readb(hdmi, HDMI_REVISION_ID) << 0);
+	prod_id0 = hdmi_readb(hdmi, HDMI_PRODUCT_ID0);
+	prod_id1 = hdmi_readb(hdmi, HDMI_PRODUCT_ID1);
+
+	if (prod_id0 != HDMI_PRODUCT_ID0_HDMI_TX ||
+	    (prod_id1 & ~HDMI_PRODUCT_ID1_HDCP) != HDMI_PRODUCT_ID1_HDMI_TX) {
+		dev_err(dev, "Unsupported HDMI controller (%04x:%02x:%02x)\n",
+			hdmi->version, prod_id0, prod_id1);
+		ret = -ENODEV;
+		goto err_iahb;
+	}
+
+	ret = dw_hdmi_detect_phy(hdmi);
+	if (ret < 0)
+		goto err_iahb;
+
+	dev_info(dev, "Detected HDMI TX controller v%x.%03x %s HDCP (%s)\n",
+		 hdmi->version >> 12, hdmi->version & 0xfff,
+		 prod_id1 & HDMI_PRODUCT_ID1_HDCP ? "with" : "without",
+		 hdmi->phy.name);
+
+	initialize_hdmi_ih_mutes(hdmi);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		ret = irq;
+		goto err_iahb;
+	}
+
+	ret = devm_request_threaded_irq(dev, irq, dw_hdmi_hardirq,
+					dw_hdmi_irq, IRQF_SHARED,
+					dev_name(dev), hdmi);
+	if (ret)
+		goto err_iahb;
+
+	hdmi->cec_notifier = cec_notifier_get(dev);
+	if (!hdmi->cec_notifier) {
+		ret = -ENOMEM;
+		goto err_iahb;
+	}
+
+	/*
+	 * To prevent overflows in HDMI_IH_FC_STAT2, set the clk regenerator
+	 * N and cts values before enabling phy
+	 */
+	hdmi_init_clk_regenerator(hdmi);
+
+	/* If DDC bus is not specified, try to register HDMI I2C bus */
+	if (!hdmi->ddc) {
+		hdmi->ddc = dw_hdmi_i2c_adapter(hdmi);
+		if (IS_ERR(hdmi->ddc))
+			hdmi->ddc = NULL;
+	}
+
+	hdmi->bridge.driver_private = hdmi;
+	hdmi->bridge.funcs = &dw_hdmi_bridge_funcs;
+#ifdef CONFIG_OF
+	hdmi->bridge.of_node = pdev->dev.of_node;
+#endif
+
+	dw_hdmi_setup_i2c(hdmi);
+	if (hdmi->phy.ops->setup_hpd)
+		hdmi->phy.ops->setup_hpd(hdmi, hdmi->phy.data);
+
+	memset(&pdevinfo, 0, sizeof(pdevinfo));
+	pdevinfo.parent = dev;
+	pdevinfo.id = PLATFORM_DEVID_AUTO;
+
+	config0 = hdmi_readb(hdmi, HDMI_CONFIG0_ID);
+	config3 = hdmi_readb(hdmi, HDMI_CONFIG3_ID);
+
+	if (iores && config3 & HDMI_CONFIG3_AHBAUDDMA) {
+		struct dw_hdmi_audio_data audio;
+
+		audio.phys = iores->start;
+		audio.base = hdmi->regs;
+		audio.irq = irq;
+		audio.hdmi = hdmi;
+		audio.eld = hdmi->connector.eld;
+		hdmi->enable_audio = dw_hdmi_ahb_audio_enable;
+		hdmi->disable_audio = dw_hdmi_ahb_audio_disable;
+
+		pdevinfo.name = "dw-hdmi-ahb-audio";
+		pdevinfo.data = &audio;
+		pdevinfo.size_data = sizeof(audio);
+		pdevinfo.dma_mask = DMA_BIT_MASK(32);
+		hdmi->audio = platform_device_register_full(&pdevinfo);
+	} else if (config0 & HDMI_CONFIG0_I2S) {
+		struct dw_hdmi_i2s_audio_data audio;
+
+		audio.hdmi	= hdmi;
+		audio.write	= hdmi_writeb;
+		audio.read	= hdmi_readb;
+		hdmi->enable_audio = dw_hdmi_i2s_audio_enable;
+		hdmi->disable_audio = dw_hdmi_i2s_audio_disable;
+
+		pdevinfo.name = "dw-hdmi-i2s-audio";
+		pdevinfo.data = &audio;
+		pdevinfo.size_data = sizeof(audio);
+		pdevinfo.dma_mask = DMA_BIT_MASK(32);
+		hdmi->audio = platform_device_register_full(&pdevinfo);
+	}
+
+	if (config0 & HDMI_CONFIG0_CEC) {
+		cec.hdmi = hdmi;
+		cec.ops = &dw_hdmi_cec_ops;
+		cec.irq = irq;
+
+		pdevinfo.name = "dw-hdmi-cec";
+		pdevinfo.data = &cec;
+		pdevinfo.size_data = sizeof(cec);
+		pdevinfo.dma_mask = 0;
+
+		hdmi->cec = platform_device_register_full(&pdevinfo);
+	}
+
+	/* Reset HDMI DDC I2C master controller and mute I2CM interrupts */
+	if (hdmi->i2c)
+		dw_hdmi_i2c_init(hdmi);
+
+	return hdmi;
+
+err_iahb:
+	if (hdmi->i2c) {
+		i2c_del_adapter(&hdmi->i2c->adap);
+		hdmi->ddc = NULL;
+	}
+
+	if (hdmi->cec_notifier)
+		cec_notifier_put(hdmi->cec_notifier);
+
+	clk_disable_unprepare(hdmi->iahb_clk);
+	if (hdmi->cec_clk)
+		clk_disable_unprepare(hdmi->cec_clk);
+err_isfr:
+	clk_disable_unprepare(hdmi->isfr_clk);
+err_res:
+	i2c_put_adapter(hdmi->ddc);
+
+	return ERR_PTR(ret);
+}
+
+static void __dw_hdmi_remove(struct dw_hdmi *hdmi)
+{
+	if (hdmi->audio && !IS_ERR(hdmi->audio))
+		platform_device_unregister(hdmi->audio);
+	if (!IS_ERR(hdmi->cec))
+		platform_device_unregister(hdmi->cec);
+
+	/* Disable all interrupts */
+	hdmi_writeb(hdmi, ~0, HDMI_IH_MUTE_PHY_STAT0);
+
+	if (hdmi->cec_notifier)
+		cec_notifier_put(hdmi->cec_notifier);
+
+	clk_disable_unprepare(hdmi->iahb_clk);
+	clk_disable_unprepare(hdmi->isfr_clk);
+	if (hdmi->cec_clk)
+		clk_disable_unprepare(hdmi->cec_clk);
+
+	if (hdmi->i2c)
+		i2c_del_adapter(&hdmi->i2c->adap);
+	else
+		i2c_put_adapter(hdmi->ddc);
+}
+
+/* -----------------------------------------------------------------------------
+ * Probe/remove API, used from platforms based on the DRM bridge API.
+ */
+struct dw_hdmi *dw_hdmi_probe(struct platform_device *pdev,
+			      const struct dw_hdmi_plat_data *plat_data)
+{
+	struct dw_hdmi *hdmi;
+
+	hdmi = __dw_hdmi_probe(pdev, plat_data);
+	if (IS_ERR(hdmi))
+		return hdmi;
+
+	drm_bridge_add(&hdmi->bridge);
+
+	return hdmi;
+}
+EXPORT_SYMBOL_GPL(dw_hdmi_probe);
+
+void dw_hdmi_remove(struct dw_hdmi *hdmi)
+{
+	drm_bridge_remove(&hdmi->bridge);
+
+	__dw_hdmi_remove(hdmi);
+}
+EXPORT_SYMBOL_GPL(dw_hdmi_remove);
+
+/* -----------------------------------------------------------------------------
+ * Bind/unbind API, used from platforms based on the component framework.
+ */
+struct dw_hdmi *dw_hdmi_bind(struct platform_device *pdev,
+			     struct drm_encoder *encoder,
+			     const struct dw_hdmi_plat_data *plat_data)
+{
+	struct dw_hdmi *hdmi;
+	int ret;
+
+	hdmi = __dw_hdmi_probe(pdev, plat_data);
+	if (IS_ERR(hdmi))
+		return hdmi;
+
+	ret = drm_bridge_attach(encoder, &hdmi->bridge, NULL);
+	if (ret) {
+		dw_hdmi_remove(hdmi);
+		DRM_ERROR("Failed to initialize bridge with drm\n");
+		return ERR_PTR(ret);
+	}
+
+	return hdmi;
+}
+EXPORT_SYMBOL_GPL(dw_hdmi_bind);
+
+void dw_hdmi_unbind(struct dw_hdmi *hdmi)
+{
+	__dw_hdmi_remove(hdmi);
+}
+EXPORT_SYMBOL_GPL(dw_hdmi_unbind);
+
+MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
+MODULE_AUTHOR("Andy Yan <andy.yan@rock-chips.com>");
+MODULE_AUTHOR("Yakir Yang <ykk@rock-chips.com>");
+MODULE_AUTHOR("Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>");
+MODULE_DESCRIPTION("DW HDMI transmitter driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:dw-hdmi");
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
new file mode 100644
index 000000000..9d90eb9c4
--- /dev/null
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
@@ -0,0 +1,1113 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __DW_HDMI_H__
+#define __DW_HDMI_H__
+
+/* Identification Registers */
+#define HDMI_DESIGN_ID                          0x0000
+#define HDMI_REVISION_ID                        0x0001
+#define HDMI_PRODUCT_ID0                        0x0002
+#define HDMI_PRODUCT_ID1                        0x0003
+#define HDMI_CONFIG0_ID                         0x0004
+#define HDMI_CONFIG1_ID                         0x0005
+#define HDMI_CONFIG2_ID                         0x0006
+#define HDMI_CONFIG3_ID                         0x0007
+
+/* Interrupt Registers */
+#define HDMI_IH_FC_STAT0                        0x0100
+#define HDMI_IH_FC_STAT1                        0x0101
+#define HDMI_IH_FC_STAT2                        0x0102
+#define HDMI_IH_AS_STAT0                        0x0103
+#define HDMI_IH_PHY_STAT0                       0x0104
+#define HDMI_IH_I2CM_STAT0                      0x0105
+#define HDMI_IH_CEC_STAT0                       0x0106
+#define HDMI_IH_VP_STAT0                        0x0107
+#define HDMI_IH_I2CMPHY_STAT0                   0x0108
+#define HDMI_IH_AHBDMAAUD_STAT0                 0x0109
+
+#define HDMI_IH_MUTE_FC_STAT0                   0x0180
+#define HDMI_IH_MUTE_FC_STAT1                   0x0181
+#define HDMI_IH_MUTE_FC_STAT2                   0x0182
+#define HDMI_IH_MUTE_AS_STAT0                   0x0183
+#define HDMI_IH_MUTE_PHY_STAT0                  0x0184
+#define HDMI_IH_MUTE_I2CM_STAT0                 0x0185
+#define HDMI_IH_MUTE_CEC_STAT0                  0x0186
+#define HDMI_IH_MUTE_VP_STAT0                   0x0187
+#define HDMI_IH_MUTE_I2CMPHY_STAT0              0x0188
+#define HDMI_IH_MUTE_AHBDMAAUD_STAT0            0x0189
+#define HDMI_IH_MUTE                            0x01FF
+
+/* Video Sample Registers */
+#define HDMI_TX_INVID0                          0x0200
+#define HDMI_TX_INSTUFFING                      0x0201
+#define HDMI_TX_GYDATA0                         0x0202
+#define HDMI_TX_GYDATA1                         0x0203
+#define HDMI_TX_RCRDATA0                        0x0204
+#define HDMI_TX_RCRDATA1                        0x0205
+#define HDMI_TX_BCBDATA0                        0x0206
+#define HDMI_TX_BCBDATA1                        0x0207
+
+/* Video Packetizer Registers */
+#define HDMI_VP_STATUS                          0x0800
+#define HDMI_VP_PR_CD                           0x0801
+#define HDMI_VP_STUFF                           0x0802
+#define HDMI_VP_REMAP                           0x0803
+#define HDMI_VP_CONF                            0x0804
+#define HDMI_VP_STAT                            0x0805
+#define HDMI_VP_INT                             0x0806
+#define HDMI_VP_MASK                            0x0807
+#define HDMI_VP_POL                             0x0808
+
+/* Frame Composer Registers */
+#define HDMI_FC_INVIDCONF                       0x1000
+#define HDMI_FC_INHACTV0                        0x1001
+#define HDMI_FC_INHACTV1                        0x1002
+#define HDMI_FC_INHBLANK0                       0x1003
+#define HDMI_FC_INHBLANK1                       0x1004
+#define HDMI_FC_INVACTV0                        0x1005
+#define HDMI_FC_INVACTV1                        0x1006
+#define HDMI_FC_INVBLANK                        0x1007
+#define HDMI_FC_HSYNCINDELAY0                   0x1008
+#define HDMI_FC_HSYNCINDELAY1                   0x1009
+#define HDMI_FC_HSYNCINWIDTH0                   0x100A
+#define HDMI_FC_HSYNCINWIDTH1                   0x100B
+#define HDMI_FC_VSYNCINDELAY                    0x100C
+#define HDMI_FC_VSYNCINWIDTH                    0x100D
+#define HDMI_FC_INFREQ0                         0x100E
+#define HDMI_FC_INFREQ1                         0x100F
+#define HDMI_FC_INFREQ2                         0x1010
+#define HDMI_FC_CTRLDUR                         0x1011
+#define HDMI_FC_EXCTRLDUR                       0x1012
+#define HDMI_FC_EXCTRLSPAC                      0x1013
+#define HDMI_FC_CH0PREAM                        0x1014
+#define HDMI_FC_CH1PREAM                        0x1015
+#define HDMI_FC_CH2PREAM                        0x1016
+#define HDMI_FC_AVICONF3                        0x1017
+#define HDMI_FC_GCP                             0x1018
+#define HDMI_FC_AVICONF0                        0x1019
+#define HDMI_FC_AVICONF1                        0x101A
+#define HDMI_FC_AVICONF2                        0x101B
+#define HDMI_FC_AVIVID                          0x101C
+#define HDMI_FC_AVIETB0                         0x101D
+#define HDMI_FC_AVIETB1                         0x101E
+#define HDMI_FC_AVISBB0                         0x101F
+#define HDMI_FC_AVISBB1                         0x1020
+#define HDMI_FC_AVIELB0                         0x1021
+#define HDMI_FC_AVIELB1                         0x1022
+#define HDMI_FC_AVISRB0                         0x1023
+#define HDMI_FC_AVISRB1                         0x1024
+#define HDMI_FC_AUDICONF0                       0x1025
+#define HDMI_FC_AUDICONF1                       0x1026
+#define HDMI_FC_AUDICONF2                       0x1027
+#define HDMI_FC_AUDICONF3                       0x1028
+#define HDMI_FC_VSDIEEEID0                      0x1029
+#define HDMI_FC_VSDSIZE                         0x102A
+#define HDMI_FC_VSDIEEEID1                      0x1030
+#define HDMI_FC_VSDIEEEID2                      0x1031
+#define HDMI_FC_VSDPAYLOAD0                     0x1032
+#define HDMI_FC_VSDPAYLOAD1                     0x1033
+#define HDMI_FC_VSDPAYLOAD2                     0x1034
+#define HDMI_FC_VSDPAYLOAD3                     0x1035
+#define HDMI_FC_VSDPAYLOAD4                     0x1036
+#define HDMI_FC_VSDPAYLOAD5                     0x1037
+#define HDMI_FC_VSDPAYLOAD6                     0x1038
+#define HDMI_FC_VSDPAYLOAD7                     0x1039
+#define HDMI_FC_VSDPAYLOAD8                     0x103A
+#define HDMI_FC_VSDPAYLOAD9                     0x103B
+#define HDMI_FC_VSDPAYLOAD10                    0x103C
+#define HDMI_FC_VSDPAYLOAD11                    0x103D
+#define HDMI_FC_VSDPAYLOAD12                    0x103E
+#define HDMI_FC_VSDPAYLOAD13                    0x103F
+#define HDMI_FC_VSDPAYLOAD14                    0x1040
+#define HDMI_FC_VSDPAYLOAD15                    0x1041
+#define HDMI_FC_VSDPAYLOAD16                    0x1042
+#define HDMI_FC_VSDPAYLOAD17                    0x1043
+#define HDMI_FC_VSDPAYLOAD18                    0x1044
+#define HDMI_FC_VSDPAYLOAD19                    0x1045
+#define HDMI_FC_VSDPAYLOAD20                    0x1046
+#define HDMI_FC_VSDPAYLOAD21                    0x1047
+#define HDMI_FC_VSDPAYLOAD22                    0x1048
+#define HDMI_FC_VSDPAYLOAD23                    0x1049
+#define HDMI_FC_SPDVENDORNAME0                  0x104A
+#define HDMI_FC_SPDVENDORNAME1                  0x104B
+#define HDMI_FC_SPDVENDORNAME2                  0x104C
+#define HDMI_FC_SPDVENDORNAME3                  0x104D
+#define HDMI_FC_SPDVENDORNAME4                  0x104E
+#define HDMI_FC_SPDVENDORNAME5                  0x104F
+#define HDMI_FC_SPDVENDORNAME6                  0x1050
+#define HDMI_FC_SPDVENDORNAME7                  0x1051
+#define HDMI_FC_SDPPRODUCTNAME0                 0x1052
+#define HDMI_FC_SDPPRODUCTNAME1                 0x1053
+#define HDMI_FC_SDPPRODUCTNAME2                 0x1054
+#define HDMI_FC_SDPPRODUCTNAME3                 0x1055
+#define HDMI_FC_SDPPRODUCTNAME4                 0x1056
+#define HDMI_FC_SDPPRODUCTNAME5                 0x1057
+#define HDMI_FC_SDPPRODUCTNAME6                 0x1058
+#define HDMI_FC_SDPPRODUCTNAME7                 0x1059
+#define HDMI_FC_SDPPRODUCTNAME8                 0x105A
+#define HDMI_FC_SDPPRODUCTNAME9                 0x105B
+#define HDMI_FC_SDPPRODUCTNAME10                0x105C
+#define HDMI_FC_SDPPRODUCTNAME11                0x105D
+#define HDMI_FC_SDPPRODUCTNAME12                0x105E
+#define HDMI_FC_SDPPRODUCTNAME13                0x105F
+#define HDMI_FC_SDPPRODUCTNAME14                0x1060
+#define HDMI_FC_SPDPRODUCTNAME15                0x1061
+#define HDMI_FC_SPDDEVICEINF                    0x1062
+#define HDMI_FC_AUDSCONF                        0x1063
+#define HDMI_FC_AUDSSTAT                        0x1064
+#define HDMI_FC_DATACH0FILL                     0x1070
+#define HDMI_FC_DATACH1FILL                     0x1071
+#define HDMI_FC_DATACH2FILL                     0x1072
+#define HDMI_FC_CTRLQHIGH                       0x1073
+#define HDMI_FC_CTRLQLOW                        0x1074
+#define HDMI_FC_ACP0                            0x1075
+#define HDMI_FC_ACP28                           0x1076
+#define HDMI_FC_ACP27                           0x1077
+#define HDMI_FC_ACP26                           0x1078
+#define HDMI_FC_ACP25                           0x1079
+#define HDMI_FC_ACP24                           0x107A
+#define HDMI_FC_ACP23                           0x107B
+#define HDMI_FC_ACP22                           0x107C
+#define HDMI_FC_ACP21                           0x107D
+#define HDMI_FC_ACP20                           0x107E
+#define HDMI_FC_ACP19                           0x107F
+#define HDMI_FC_ACP18                           0x1080
+#define HDMI_FC_ACP17                           0x1081
+#define HDMI_FC_ACP16                           0x1082
+#define HDMI_FC_ACP15                           0x1083
+#define HDMI_FC_ACP14                           0x1084
+#define HDMI_FC_ACP13                           0x1085
+#define HDMI_FC_ACP12                           0x1086
+#define HDMI_FC_ACP11                           0x1087
+#define HDMI_FC_ACP10                           0x1088
+#define HDMI_FC_ACP9                            0x1089
+#define HDMI_FC_ACP8                            0x108A
+#define HDMI_FC_ACP7                            0x108B
+#define HDMI_FC_ACP6                            0x108C
+#define HDMI_FC_ACP5                            0x108D
+#define HDMI_FC_ACP4                            0x108E
+#define HDMI_FC_ACP3                            0x108F
+#define HDMI_FC_ACP2                            0x1090
+#define HDMI_FC_ACP1                            0x1091
+#define HDMI_FC_ISCR1_0                         0x1092
+#define HDMI_FC_ISCR1_16                        0x1093
+#define HDMI_FC_ISCR1_15                        0x1094
+#define HDMI_FC_ISCR1_14                        0x1095
+#define HDMI_FC_ISCR1_13                        0x1096
+#define HDMI_FC_ISCR1_12                        0x1097
+#define HDMI_FC_ISCR1_11                        0x1098
+#define HDMI_FC_ISCR1_10                        0x1099
+#define HDMI_FC_ISCR1_9                         0x109A
+#define HDMI_FC_ISCR1_8                         0x109B
+#define HDMI_FC_ISCR1_7                         0x109C
+#define HDMI_FC_ISCR1_6                         0x109D
+#define HDMI_FC_ISCR1_5                         0x109E
+#define HDMI_FC_ISCR1_4                         0x109F
+#define HDMI_FC_ISCR1_3                         0x10A0
+#define HDMI_FC_ISCR1_2                         0x10A1
+#define HDMI_FC_ISCR1_1                         0x10A2
+#define HDMI_FC_ISCR2_15                        0x10A3
+#define HDMI_FC_ISCR2_14                        0x10A4
+#define HDMI_FC_ISCR2_13                        0x10A5
+#define HDMI_FC_ISCR2_12                        0x10A6
+#define HDMI_FC_ISCR2_11                        0x10A7
+#define HDMI_FC_ISCR2_10                        0x10A8
+#define HDMI_FC_ISCR2_9                         0x10A9
+#define HDMI_FC_ISCR2_8                         0x10AA
+#define HDMI_FC_ISCR2_7                         0x10AB
+#define HDMI_FC_ISCR2_6                         0x10AC
+#define HDMI_FC_ISCR2_5                         0x10AD
+#define HDMI_FC_ISCR2_4                         0x10AE
+#define HDMI_FC_ISCR2_3                         0x10AF
+#define HDMI_FC_ISCR2_2                         0x10B0
+#define HDMI_FC_ISCR2_1                         0x10B1
+#define HDMI_FC_ISCR2_0                         0x10B2
+#define HDMI_FC_DATAUTO0                        0x10B3
+#define HDMI_FC_DATAUTO1                        0x10B4
+#define HDMI_FC_DATAUTO2                        0x10B5
+#define HDMI_FC_DATMAN                          0x10B6
+#define HDMI_FC_DATAUTO3                        0x10B7
+#define HDMI_FC_RDRB0                           0x10B8
+#define HDMI_FC_RDRB1                           0x10B9
+#define HDMI_FC_RDRB2                           0x10BA
+#define HDMI_FC_RDRB3                           0x10BB
+#define HDMI_FC_RDRB4                           0x10BC
+#define HDMI_FC_RDRB5                           0x10BD
+#define HDMI_FC_RDRB6                           0x10BE
+#define HDMI_FC_RDRB7                           0x10BF
+#define HDMI_FC_STAT0                           0x10D0
+#define HDMI_FC_INT0                            0x10D1
+#define HDMI_FC_MASK0                           0x10D2
+#define HDMI_FC_POL0                            0x10D3
+#define HDMI_FC_STAT1                           0x10D4
+#define HDMI_FC_INT1                            0x10D5
+#define HDMI_FC_MASK1                           0x10D6
+#define HDMI_FC_POL1                            0x10D7
+#define HDMI_FC_STAT2                           0x10D8
+#define HDMI_FC_INT2                            0x10D9
+#define HDMI_FC_MASK2                           0x10DA
+#define HDMI_FC_POL2                            0x10DB
+#define HDMI_FC_PRCONF                          0x10E0
+
+#define HDMI_FC_GMD_STAT                        0x1100
+#define HDMI_FC_GMD_EN                          0x1101
+#define HDMI_FC_GMD_UP                          0x1102
+#define HDMI_FC_GMD_CONF                        0x1103
+#define HDMI_FC_GMD_HB                          0x1104
+#define HDMI_FC_GMD_PB0                         0x1105
+#define HDMI_FC_GMD_PB1                         0x1106
+#define HDMI_FC_GMD_PB2                         0x1107
+#define HDMI_FC_GMD_PB3                         0x1108
+#define HDMI_FC_GMD_PB4                         0x1109
+#define HDMI_FC_GMD_PB5                         0x110A
+#define HDMI_FC_GMD_PB6                         0x110B
+#define HDMI_FC_GMD_PB7                         0x110C
+#define HDMI_FC_GMD_PB8                         0x110D
+#define HDMI_FC_GMD_PB9                         0x110E
+#define HDMI_FC_GMD_PB10                        0x110F
+#define HDMI_FC_GMD_PB11                        0x1110
+#define HDMI_FC_GMD_PB12                        0x1111
+#define HDMI_FC_GMD_PB13                        0x1112
+#define HDMI_FC_GMD_PB14                        0x1113
+#define HDMI_FC_GMD_PB15                        0x1114
+#define HDMI_FC_GMD_PB16                        0x1115
+#define HDMI_FC_GMD_PB17                        0x1116
+#define HDMI_FC_GMD_PB18                        0x1117
+#define HDMI_FC_GMD_PB19                        0x1118
+#define HDMI_FC_GMD_PB20                        0x1119
+#define HDMI_FC_GMD_PB21                        0x111A
+#define HDMI_FC_GMD_PB22                        0x111B
+#define HDMI_FC_GMD_PB23                        0x111C
+#define HDMI_FC_GMD_PB24                        0x111D
+#define HDMI_FC_GMD_PB25                        0x111E
+#define HDMI_FC_GMD_PB26                        0x111F
+#define HDMI_FC_GMD_PB27                        0x1120
+
+#define HDMI_FC_DBGFORCE                        0x1200
+#define HDMI_FC_DBGAUD0CH0                      0x1201
+#define HDMI_FC_DBGAUD1CH0                      0x1202
+#define HDMI_FC_DBGAUD2CH0                      0x1203
+#define HDMI_FC_DBGAUD0CH1                      0x1204
+#define HDMI_FC_DBGAUD1CH1                      0x1205
+#define HDMI_FC_DBGAUD2CH1                      0x1206
+#define HDMI_FC_DBGAUD0CH2                      0x1207
+#define HDMI_FC_DBGAUD1CH2                      0x1208
+#define HDMI_FC_DBGAUD2CH2                      0x1209
+#define HDMI_FC_DBGAUD0CH3                      0x120A
+#define HDMI_FC_DBGAUD1CH3                      0x120B
+#define HDMI_FC_DBGAUD2CH3                      0x120C
+#define HDMI_FC_DBGAUD0CH4                      0x120D
+#define HDMI_FC_DBGAUD1CH4                      0x120E
+#define HDMI_FC_DBGAUD2CH4                      0x120F
+#define HDMI_FC_DBGAUD0CH5                      0x1210
+#define HDMI_FC_DBGAUD1CH5                      0x1211
+#define HDMI_FC_DBGAUD2CH5                      0x1212
+#define HDMI_FC_DBGAUD0CH6                      0x1213
+#define HDMI_FC_DBGAUD1CH6                      0x1214
+#define HDMI_FC_DBGAUD2CH6                      0x1215
+#define HDMI_FC_DBGAUD0CH7                      0x1216
+#define HDMI_FC_DBGAUD1CH7                      0x1217
+#define HDMI_FC_DBGAUD2CH7                      0x1218
+#define HDMI_FC_DBGTMDS0                        0x1219
+#define HDMI_FC_DBGTMDS1                        0x121A
+#define HDMI_FC_DBGTMDS2                        0x121B
+
+/* HDMI Source PHY Registers */
+#define HDMI_PHY_CONF0                          0x3000
+#define HDMI_PHY_TST0                           0x3001
+#define HDMI_PHY_TST1                           0x3002
+#define HDMI_PHY_TST2                           0x3003
+#define HDMI_PHY_STAT0                          0x3004
+#define HDMI_PHY_INT0                           0x3005
+#define HDMI_PHY_MASK0                          0x3006
+#define HDMI_PHY_POL0                           0x3007
+
+/* HDMI Master PHY Registers */
+#define HDMI_PHY_I2CM_SLAVE_ADDR                0x3020
+#define HDMI_PHY_I2CM_ADDRESS_ADDR              0x3021
+#define HDMI_PHY_I2CM_DATAO_1_ADDR              0x3022
+#define HDMI_PHY_I2CM_DATAO_0_ADDR              0x3023
+#define HDMI_PHY_I2CM_DATAI_1_ADDR              0x3024
+#define HDMI_PHY_I2CM_DATAI_0_ADDR              0x3025
+#define HDMI_PHY_I2CM_OPERATION_ADDR            0x3026
+#define HDMI_PHY_I2CM_INT_ADDR                  0x3027
+#define HDMI_PHY_I2CM_CTLINT_ADDR               0x3028
+#define HDMI_PHY_I2CM_DIV_ADDR                  0x3029
+#define HDMI_PHY_I2CM_SOFTRSTZ_ADDR             0x302a
+#define HDMI_PHY_I2CM_SS_SCL_HCNT_1_ADDR        0x302b
+#define HDMI_PHY_I2CM_SS_SCL_HCNT_0_ADDR        0x302c
+#define HDMI_PHY_I2CM_SS_SCL_LCNT_1_ADDR        0x302d
+#define HDMI_PHY_I2CM_SS_SCL_LCNT_0_ADDR        0x302e
+#define HDMI_PHY_I2CM_FS_SCL_HCNT_1_ADDR        0x302f
+#define HDMI_PHY_I2CM_FS_SCL_HCNT_0_ADDR        0x3030
+#define HDMI_PHY_I2CM_FS_SCL_LCNT_1_ADDR        0x3031
+#define HDMI_PHY_I2CM_FS_SCL_LCNT_0_ADDR        0x3032
+
+/* Audio Sampler Registers */
+#define HDMI_AUD_CONF0                          0x3100
+#define HDMI_AUD_CONF1                          0x3101
+#define HDMI_AUD_INT                            0x3102
+#define HDMI_AUD_CONF2                          0x3103
+#define HDMI_AUD_N1                             0x3200
+#define HDMI_AUD_N2                             0x3201
+#define HDMI_AUD_N3                             0x3202
+#define HDMI_AUD_CTS1                           0x3203
+#define HDMI_AUD_CTS2                           0x3204
+#define HDMI_AUD_CTS3                           0x3205
+#define HDMI_AUD_INPUTCLKFS                     0x3206
+#define HDMI_AUD_SPDIFINT			0x3302
+#define HDMI_AUD_CONF0_HBR                      0x3400
+#define HDMI_AUD_HBR_STATUS                     0x3401
+#define HDMI_AUD_HBR_INT                        0x3402
+#define HDMI_AUD_HBR_POL                        0x3403
+#define HDMI_AUD_HBR_MASK                       0x3404
+
+/*
+ * Generic Parallel Audio Interface Registers
+ * Not used as GPAUD interface is not enabled in hw
+ */
+#define HDMI_GP_CONF0                           0x3500
+#define HDMI_GP_CONF1                           0x3501
+#define HDMI_GP_CONF2                           0x3502
+#define HDMI_GP_STAT                            0x3503
+#define HDMI_GP_INT                             0x3504
+#define HDMI_GP_MASK                            0x3505
+#define HDMI_GP_POL                             0x3506
+
+/* Audio DMA Registers */
+#define HDMI_AHB_DMA_CONF0                      0x3600
+#define HDMI_AHB_DMA_START                      0x3601
+#define HDMI_AHB_DMA_STOP                       0x3602
+#define HDMI_AHB_DMA_THRSLD                     0x3603
+#define HDMI_AHB_DMA_STRADDR0                   0x3604
+#define HDMI_AHB_DMA_STRADDR1                   0x3605
+#define HDMI_AHB_DMA_STRADDR2                   0x3606
+#define HDMI_AHB_DMA_STRADDR3                   0x3607
+#define HDMI_AHB_DMA_STPADDR0                   0x3608
+#define HDMI_AHB_DMA_STPADDR1                   0x3609
+#define HDMI_AHB_DMA_STPADDR2                   0x360a
+#define HDMI_AHB_DMA_STPADDR3                   0x360b
+#define HDMI_AHB_DMA_BSTADDR0                   0x360c
+#define HDMI_AHB_DMA_BSTADDR1                   0x360d
+#define HDMI_AHB_DMA_BSTADDR2                   0x360e
+#define HDMI_AHB_DMA_BSTADDR3                   0x360f
+#define HDMI_AHB_DMA_MBLENGTH0                  0x3610
+#define HDMI_AHB_DMA_MBLENGTH1                  0x3611
+#define HDMI_AHB_DMA_STAT                       0x3612
+#define HDMI_AHB_DMA_INT                        0x3613
+#define HDMI_AHB_DMA_MASK                       0x3614
+#define HDMI_AHB_DMA_POL                        0x3615
+#define HDMI_AHB_DMA_CONF1                      0x3616
+#define HDMI_AHB_DMA_BUFFSTAT                   0x3617
+#define HDMI_AHB_DMA_BUFFINT                    0x3618
+#define HDMI_AHB_DMA_BUFFMASK                   0x3619
+#define HDMI_AHB_DMA_BUFFPOL                    0x361a
+
+/* Main Controller Registers */
+#define HDMI_MC_SFRDIV                          0x4000
+#define HDMI_MC_CLKDIS                          0x4001
+#define HDMI_MC_SWRSTZ                          0x4002
+#define HDMI_MC_OPCTRL                          0x4003
+#define HDMI_MC_FLOWCTRL                        0x4004
+#define HDMI_MC_PHYRSTZ                         0x4005
+#define HDMI_MC_LOCKONCLOCK                     0x4006
+#define HDMI_MC_HEACPHY_RST                     0x4007
+
+/* Color Space  Converter Registers */
+#define HDMI_CSC_CFG                            0x4100
+#define HDMI_CSC_SCALE                          0x4101
+#define HDMI_CSC_COEF_A1_MSB                    0x4102
+#define HDMI_CSC_COEF_A1_LSB                    0x4103
+#define HDMI_CSC_COEF_A2_MSB                    0x4104
+#define HDMI_CSC_COEF_A2_LSB                    0x4105
+#define HDMI_CSC_COEF_A3_MSB                    0x4106
+#define HDMI_CSC_COEF_A3_LSB                    0x4107
+#define HDMI_CSC_COEF_A4_MSB                    0x4108
+#define HDMI_CSC_COEF_A4_LSB                    0x4109
+#define HDMI_CSC_COEF_B1_MSB                    0x410A
+#define HDMI_CSC_COEF_B1_LSB                    0x410B
+#define HDMI_CSC_COEF_B2_MSB                    0x410C
+#define HDMI_CSC_COEF_B2_LSB                    0x410D
+#define HDMI_CSC_COEF_B3_MSB                    0x410E
+#define HDMI_CSC_COEF_B3_LSB                    0x410F
+#define HDMI_CSC_COEF_B4_MSB                    0x4110
+#define HDMI_CSC_COEF_B4_LSB                    0x4111
+#define HDMI_CSC_COEF_C1_MSB                    0x4112
+#define HDMI_CSC_COEF_C1_LSB                    0x4113
+#define HDMI_CSC_COEF_C2_MSB                    0x4114
+#define HDMI_CSC_COEF_C2_LSB                    0x4115
+#define HDMI_CSC_COEF_C3_MSB                    0x4116
+#define HDMI_CSC_COEF_C3_LSB                    0x4117
+#define HDMI_CSC_COEF_C4_MSB                    0x4118
+#define HDMI_CSC_COEF_C4_LSB                    0x4119
+
+/* HDCP Encryption Engine Registers */
+#define HDMI_A_HDCPCFG0                         0x5000
+#define HDMI_A_HDCPCFG1                         0x5001
+#define HDMI_A_HDCPOBS0                         0x5002
+#define HDMI_A_HDCPOBS1                         0x5003
+#define HDMI_A_HDCPOBS2                         0x5004
+#define HDMI_A_HDCPOBS3                         0x5005
+#define HDMI_A_APIINTCLR                        0x5006
+#define HDMI_A_APIINTSTAT                       0x5007
+#define HDMI_A_APIINTMSK                        0x5008
+#define HDMI_A_VIDPOLCFG                        0x5009
+#define HDMI_A_OESSWCFG                         0x500A
+#define HDMI_A_TIMER1SETUP0                     0x500B
+#define HDMI_A_TIMER1SETUP1                     0x500C
+#define HDMI_A_TIMER2SETUP0                     0x500D
+#define HDMI_A_TIMER2SETUP1                     0x500E
+#define HDMI_A_100MSCFG                         0x500F
+#define HDMI_A_2SCFG0                           0x5010
+#define HDMI_A_2SCFG1                           0x5011
+#define HDMI_A_5SCFG0                           0x5012
+#define HDMI_A_5SCFG1                           0x5013
+#define HDMI_A_SRMVERLSB                        0x5014
+#define HDMI_A_SRMVERMSB                        0x5015
+#define HDMI_A_SRMCTRL                          0x5016
+#define HDMI_A_SFRSETUP                         0x5017
+#define HDMI_A_I2CHSETUP                        0x5018
+#define HDMI_A_INTSETUP                         0x5019
+#define HDMI_A_PRESETUP                         0x501A
+#define HDMI_A_SRM_BASE                         0x5020
+
+/* I2C Master Registers (E-DDC) */
+#define HDMI_I2CM_SLAVE                         0x7E00
+#define HDMI_I2CM_ADDRESS                       0x7E01
+#define HDMI_I2CM_DATAO                         0x7E02
+#define HDMI_I2CM_DATAI                         0x7E03
+#define HDMI_I2CM_OPERATION                     0x7E04
+#define HDMI_I2CM_INT                           0x7E05
+#define HDMI_I2CM_CTLINT                        0x7E06
+#define HDMI_I2CM_DIV                           0x7E07
+#define HDMI_I2CM_SEGADDR                       0x7E08
+#define HDMI_I2CM_SOFTRSTZ                      0x7E09
+#define HDMI_I2CM_SEGPTR                        0x7E0A
+#define HDMI_I2CM_SS_SCL_HCNT_1_ADDR            0x7E0B
+#define HDMI_I2CM_SS_SCL_HCNT_0_ADDR            0x7E0C
+#define HDMI_I2CM_SS_SCL_LCNT_1_ADDR            0x7E0D
+#define HDMI_I2CM_SS_SCL_LCNT_0_ADDR            0x7E0E
+#define HDMI_I2CM_FS_SCL_HCNT_1_ADDR            0x7E0F
+#define HDMI_I2CM_FS_SCL_HCNT_0_ADDR            0x7E10
+#define HDMI_I2CM_FS_SCL_LCNT_1_ADDR            0x7E11
+#define HDMI_I2CM_FS_SCL_LCNT_0_ADDR            0x7E12
+
+enum {
+/* PRODUCT_ID0 field values */
+	HDMI_PRODUCT_ID0_HDMI_TX = 0xa0,
+
+/* PRODUCT_ID1 field values */
+	HDMI_PRODUCT_ID1_HDCP = 0xc0,
+	HDMI_PRODUCT_ID1_HDMI_RX = 0x02,
+	HDMI_PRODUCT_ID1_HDMI_TX = 0x01,
+
+/* CONFIG0_ID field values */
+	HDMI_CONFIG0_I2S = 0x10,
+	HDMI_CONFIG0_CEC = 0x02,
+
+/* CONFIG1_ID field values */
+	HDMI_CONFIG1_AHB = 0x01,
+
+/* CONFIG3_ID field values */
+	HDMI_CONFIG3_AHBAUDDMA = 0x02,
+	HDMI_CONFIG3_GPAUD = 0x01,
+
+/* IH_FC_INT2 field values */
+	HDMI_IH_FC_INT2_OVERFLOW_MASK = 0x03,
+	HDMI_IH_FC_INT2_LOW_PRIORITY_OVERFLOW = 0x02,
+	HDMI_IH_FC_INT2_HIGH_PRIORITY_OVERFLOW = 0x01,
+
+/* IH_FC_STAT2 field values */
+	HDMI_IH_FC_STAT2_OVERFLOW_MASK = 0x03,
+	HDMI_IH_FC_STAT2_LOW_PRIORITY_OVERFLOW = 0x02,
+	HDMI_IH_FC_STAT2_HIGH_PRIORITY_OVERFLOW = 0x01,
+
+/* IH_PHY_STAT0 field values */
+	HDMI_IH_PHY_STAT0_RX_SENSE3 = 0x20,
+	HDMI_IH_PHY_STAT0_RX_SENSE2 = 0x10,
+	HDMI_IH_PHY_STAT0_RX_SENSE1 = 0x8,
+	HDMI_IH_PHY_STAT0_RX_SENSE0 = 0x4,
+	HDMI_IH_PHY_STAT0_TX_PHY_LOCK = 0x2,
+	HDMI_IH_PHY_STAT0_HPD = 0x1,
+
+/* IH_I2CM_STAT0 and IH_MUTE_I2CM_STAT0 field values */
+	HDMI_IH_I2CM_STAT0_DONE = 0x2,
+	HDMI_IH_I2CM_STAT0_ERROR = 0x1,
+
+/* IH_MUTE_I2CMPHY_STAT0 field values */
+	HDMI_IH_MUTE_I2CMPHY_STAT0_I2CMPHYDONE = 0x2,
+	HDMI_IH_MUTE_I2CMPHY_STAT0_I2CMPHYERROR = 0x1,
+
+/* IH_AHBDMAAUD_STAT0 field values */
+	HDMI_IH_AHBDMAAUD_STAT0_ERROR = 0x20,
+	HDMI_IH_AHBDMAAUD_STAT0_LOST = 0x10,
+	HDMI_IH_AHBDMAAUD_STAT0_RETRY = 0x08,
+	HDMI_IH_AHBDMAAUD_STAT0_DONE = 0x04,
+	HDMI_IH_AHBDMAAUD_STAT0_BUFFFULL = 0x02,
+	HDMI_IH_AHBDMAAUD_STAT0_BUFFEMPTY = 0x01,
+
+/* IH_MUTE_FC_STAT2 field values */
+	HDMI_IH_MUTE_FC_STAT2_OVERFLOW_MASK = 0x03,
+	HDMI_IH_MUTE_FC_STAT2_LOW_PRIORITY_OVERFLOW = 0x02,
+	HDMI_IH_MUTE_FC_STAT2_HIGH_PRIORITY_OVERFLOW = 0x01,
+
+/* IH_MUTE_AHBDMAAUD_STAT0 field values */
+	HDMI_IH_MUTE_AHBDMAAUD_STAT0_ERROR = 0x20,
+	HDMI_IH_MUTE_AHBDMAAUD_STAT0_LOST = 0x10,
+	HDMI_IH_MUTE_AHBDMAAUD_STAT0_RETRY = 0x08,
+	HDMI_IH_MUTE_AHBDMAAUD_STAT0_DONE = 0x04,
+	HDMI_IH_MUTE_AHBDMAAUD_STAT0_BUFFFULL = 0x02,
+	HDMI_IH_MUTE_AHBDMAAUD_STAT0_BUFFEMPTY = 0x01,
+
+/* IH_MUTE field values */
+	HDMI_IH_MUTE_MUTE_WAKEUP_INTERRUPT = 0x2,
+	HDMI_IH_MUTE_MUTE_ALL_INTERRUPT = 0x1,
+
+/* TX_INVID0 field values */
+	HDMI_TX_INVID0_INTERNAL_DE_GENERATOR_MASK = 0x80,
+	HDMI_TX_INVID0_INTERNAL_DE_GENERATOR_ENABLE = 0x80,
+	HDMI_TX_INVID0_INTERNAL_DE_GENERATOR_DISABLE = 0x00,
+	HDMI_TX_INVID0_VIDEO_MAPPING_MASK = 0x1F,
+	HDMI_TX_INVID0_VIDEO_MAPPING_OFFSET = 0,
+
+/* TX_INSTUFFING field values */
+	HDMI_TX_INSTUFFING_BDBDATA_STUFFING_MASK = 0x4,
+	HDMI_TX_INSTUFFING_BDBDATA_STUFFING_ENABLE = 0x4,
+	HDMI_TX_INSTUFFING_BDBDATA_STUFFING_DISABLE = 0x0,
+	HDMI_TX_INSTUFFING_RCRDATA_STUFFING_MASK = 0x2,
+	HDMI_TX_INSTUFFING_RCRDATA_STUFFING_ENABLE = 0x2,
+	HDMI_TX_INSTUFFING_RCRDATA_STUFFING_DISABLE = 0x0,
+	HDMI_TX_INSTUFFING_GYDATA_STUFFING_MASK = 0x1,
+	HDMI_TX_INSTUFFING_GYDATA_STUFFING_ENABLE = 0x1,
+	HDMI_TX_INSTUFFING_GYDATA_STUFFING_DISABLE = 0x0,
+
+/* VP_PR_CD field values */
+	HDMI_VP_PR_CD_COLOR_DEPTH_MASK = 0xF0,
+	HDMI_VP_PR_CD_COLOR_DEPTH_OFFSET = 4,
+	HDMI_VP_PR_CD_DESIRED_PR_FACTOR_MASK = 0x0F,
+	HDMI_VP_PR_CD_DESIRED_PR_FACTOR_OFFSET = 0,
+
+/* VP_STUFF field values */
+	HDMI_VP_STUFF_IDEFAULT_PHASE_MASK = 0x20,
+	HDMI_VP_STUFF_IDEFAULT_PHASE_OFFSET = 5,
+	HDMI_VP_STUFF_IFIX_PP_TO_LAST_MASK = 0x10,
+	HDMI_VP_STUFF_IFIX_PP_TO_LAST_OFFSET = 4,
+	HDMI_VP_STUFF_ICX_GOTO_P0_ST_MASK = 0x8,
+	HDMI_VP_STUFF_ICX_GOTO_P0_ST_OFFSET = 3,
+	HDMI_VP_STUFF_YCC422_STUFFING_MASK = 0x4,
+	HDMI_VP_STUFF_YCC422_STUFFING_STUFFING_MODE = 0x4,
+	HDMI_VP_STUFF_YCC422_STUFFING_DIRECT_MODE = 0x0,
+	HDMI_VP_STUFF_PP_STUFFING_MASK = 0x2,
+	HDMI_VP_STUFF_PP_STUFFING_STUFFING_MODE = 0x2,
+	HDMI_VP_STUFF_PP_STUFFING_DIRECT_MODE = 0x0,
+	HDMI_VP_STUFF_PR_STUFFING_MASK = 0x1,
+	HDMI_VP_STUFF_PR_STUFFING_STUFFING_MODE = 0x1,
+	HDMI_VP_STUFF_PR_STUFFING_DIRECT_MODE = 0x0,
+
+/* VP_CONF field values */
+	HDMI_VP_CONF_BYPASS_EN_MASK = 0x40,
+	HDMI_VP_CONF_BYPASS_EN_ENABLE = 0x40,
+	HDMI_VP_CONF_BYPASS_EN_DISABLE = 0x00,
+	HDMI_VP_CONF_PP_EN_ENMASK = 0x20,
+	HDMI_VP_CONF_PP_EN_ENABLE = 0x20,
+	HDMI_VP_CONF_PP_EN_DISABLE = 0x00,
+	HDMI_VP_CONF_PR_EN_MASK = 0x10,
+	HDMI_VP_CONF_PR_EN_ENABLE = 0x10,
+	HDMI_VP_CONF_PR_EN_DISABLE = 0x00,
+	HDMI_VP_CONF_YCC422_EN_MASK = 0x8,
+	HDMI_VP_CONF_YCC422_EN_ENABLE = 0x8,
+	HDMI_VP_CONF_YCC422_EN_DISABLE = 0x0,
+	HDMI_VP_CONF_BYPASS_SELECT_MASK = 0x4,
+	HDMI_VP_CONF_BYPASS_SELECT_VID_PACKETIZER = 0x4,
+	HDMI_VP_CONF_BYPASS_SELECT_PIX_REPEATER = 0x0,
+	HDMI_VP_CONF_OUTPUT_SELECTOR_MASK = 0x3,
+	HDMI_VP_CONF_OUTPUT_SELECTOR_BYPASS = 0x3,
+	HDMI_VP_CONF_OUTPUT_SELECTOR_YCC422 = 0x1,
+	HDMI_VP_CONF_OUTPUT_SELECTOR_PP = 0x0,
+
+/* VP_REMAP field values */
+	HDMI_VP_REMAP_MASK = 0x3,
+	HDMI_VP_REMAP_YCC422_24bit = 0x2,
+	HDMI_VP_REMAP_YCC422_20bit = 0x1,
+	HDMI_VP_REMAP_YCC422_16bit = 0x0,
+
+/* FC_INVIDCONF field values */
+	HDMI_FC_INVIDCONF_HDCP_KEEPOUT_MASK = 0x80,
+	HDMI_FC_INVIDCONF_HDCP_KEEPOUT_ACTIVE = 0x80,
+	HDMI_FC_INVIDCONF_HDCP_KEEPOUT_INACTIVE = 0x00,
+	HDMI_FC_INVIDCONF_VSYNC_IN_POLARITY_MASK = 0x40,
+	HDMI_FC_INVIDCONF_VSYNC_IN_POLARITY_ACTIVE_HIGH = 0x40,
+	HDMI_FC_INVIDCONF_VSYNC_IN_POLARITY_ACTIVE_LOW = 0x00,
+	HDMI_FC_INVIDCONF_HSYNC_IN_POLARITY_MASK = 0x20,
+	HDMI_FC_INVIDCONF_HSYNC_IN_POLARITY_ACTIVE_HIGH = 0x20,
+	HDMI_FC_INVIDCONF_HSYNC_IN_POLARITY_ACTIVE_LOW = 0x00,
+	HDMI_FC_INVIDCONF_DE_IN_POLARITY_MASK = 0x10,
+	HDMI_FC_INVIDCONF_DE_IN_POLARITY_ACTIVE_HIGH = 0x10,
+	HDMI_FC_INVIDCONF_DE_IN_POLARITY_ACTIVE_LOW = 0x00,
+	HDMI_FC_INVIDCONF_DVI_MODEZ_MASK = 0x8,
+	HDMI_FC_INVIDCONF_DVI_MODEZ_HDMI_MODE = 0x8,
+	HDMI_FC_INVIDCONF_DVI_MODEZ_DVI_MODE = 0x0,
+	HDMI_FC_INVIDCONF_R_V_BLANK_IN_OSC_MASK = 0x2,
+	HDMI_FC_INVIDCONF_R_V_BLANK_IN_OSC_ACTIVE_HIGH = 0x2,
+	HDMI_FC_INVIDCONF_R_V_BLANK_IN_OSC_ACTIVE_LOW = 0x0,
+	HDMI_FC_INVIDCONF_IN_I_P_MASK = 0x1,
+	HDMI_FC_INVIDCONF_IN_I_P_INTERLACED = 0x1,
+	HDMI_FC_INVIDCONF_IN_I_P_PROGRESSIVE = 0x0,
+
+/* FC_AUDICONF0 field values */
+	HDMI_FC_AUDICONF0_CC_OFFSET = 4,
+	HDMI_FC_AUDICONF0_CC_MASK = 0x70,
+	HDMI_FC_AUDICONF0_CT_OFFSET = 0,
+	HDMI_FC_AUDICONF0_CT_MASK = 0xF,
+
+/* FC_AUDICONF1 field values */
+	HDMI_FC_AUDICONF1_SS_OFFSET = 3,
+	HDMI_FC_AUDICONF1_SS_MASK = 0x18,
+	HDMI_FC_AUDICONF1_SF_OFFSET = 0,
+	HDMI_FC_AUDICONF1_SF_MASK = 0x7,
+
+/* FC_AUDICONF3 field values */
+	HDMI_FC_AUDICONF3_LFEPBL_OFFSET = 5,
+	HDMI_FC_AUDICONF3_LFEPBL_MASK = 0x60,
+	HDMI_FC_AUDICONF3_DM_INH_OFFSET = 4,
+	HDMI_FC_AUDICONF3_DM_INH_MASK = 0x10,
+	HDMI_FC_AUDICONF3_LSV_OFFSET = 0,
+	HDMI_FC_AUDICONF3_LSV_MASK = 0xF,
+
+/* FC_AUDSCHNLS0 field values */
+	HDMI_FC_AUDSCHNLS0_CGMSA_OFFSET = 4,
+	HDMI_FC_AUDSCHNLS0_CGMSA_MASK = 0x30,
+	HDMI_FC_AUDSCHNLS0_COPYRIGHT_OFFSET = 0,
+	HDMI_FC_AUDSCHNLS0_COPYRIGHT_MASK = 0x01,
+
+/* FC_AUDSCHNLS3-6 field values */
+	HDMI_FC_AUDSCHNLS3_OIEC_CH0_OFFSET = 0,
+	HDMI_FC_AUDSCHNLS3_OIEC_CH0_MASK = 0x0f,
+	HDMI_FC_AUDSCHNLS3_OIEC_CH1_OFFSET = 4,
+	HDMI_FC_AUDSCHNLS3_OIEC_CH1_MASK = 0xf0,
+	HDMI_FC_AUDSCHNLS4_OIEC_CH2_OFFSET = 0,
+	HDMI_FC_AUDSCHNLS4_OIEC_CH2_MASK = 0x0f,
+	HDMI_FC_AUDSCHNLS4_OIEC_CH3_OFFSET = 4,
+	HDMI_FC_AUDSCHNLS4_OIEC_CH3_MASK = 0xf0,
+
+	HDMI_FC_AUDSCHNLS5_OIEC_CH0_OFFSET = 0,
+	HDMI_FC_AUDSCHNLS5_OIEC_CH0_MASK = 0x0f,
+	HDMI_FC_AUDSCHNLS5_OIEC_CH1_OFFSET = 4,
+	HDMI_FC_AUDSCHNLS5_OIEC_CH1_MASK = 0xf0,
+	HDMI_FC_AUDSCHNLS6_OIEC_CH2_OFFSET = 0,
+	HDMI_FC_AUDSCHNLS6_OIEC_CH2_MASK = 0x0f,
+	HDMI_FC_AUDSCHNLS6_OIEC_CH3_OFFSET = 4,
+	HDMI_FC_AUDSCHNLS6_OIEC_CH3_MASK = 0xf0,
+
+/* HDMI_FC_AUDSCHNLS7 field values */
+	HDMI_FC_AUDSCHNLS7_ACCURACY_OFFSET = 4,
+	HDMI_FC_AUDSCHNLS7_ACCURACY_MASK = 0x30,
+
+/* HDMI_FC_AUDSCHNLS8 field values */
+	HDMI_FC_AUDSCHNLS8_ORIGSAMPFREQ_MASK = 0xf0,
+	HDMI_FC_AUDSCHNLS8_ORIGSAMPFREQ_OFFSET = 4,
+	HDMI_FC_AUDSCHNLS8_WORDLEGNTH_MASK = 0x0f,
+	HDMI_FC_AUDSCHNLS8_WORDLEGNTH_OFFSET = 0,
+
+/* FC_AUDSCONF field values */
+	HDMI_FC_AUDSCONF_AUD_PACKET_SAMPFIT_MASK = 0xF0,
+	HDMI_FC_AUDSCONF_AUD_PACKET_SAMPFIT_OFFSET = 4,
+	HDMI_FC_AUDSCONF_AUD_PACKET_LAYOUT_MASK = 0x1,
+	HDMI_FC_AUDSCONF_AUD_PACKET_LAYOUT_OFFSET = 0,
+	HDMI_FC_AUDSCONF_AUD_PACKET_LAYOUT_LAYOUT1 = 0x1,
+	HDMI_FC_AUDSCONF_AUD_PACKET_LAYOUT_LAYOUT0 = 0x0,
+
+/* FC_STAT2 field values */
+	HDMI_FC_STAT2_OVERFLOW_MASK = 0x03,
+	HDMI_FC_STAT2_LOW_PRIORITY_OVERFLOW = 0x02,
+	HDMI_FC_STAT2_HIGH_PRIORITY_OVERFLOW = 0x01,
+
+/* FC_INT2 field values */
+	HDMI_FC_INT2_OVERFLOW_MASK = 0x03,
+	HDMI_FC_INT2_LOW_PRIORITY_OVERFLOW = 0x02,
+	HDMI_FC_INT2_HIGH_PRIORITY_OVERFLOW = 0x01,
+
+/* FC_MASK2 field values */
+	HDMI_FC_MASK2_OVERFLOW_MASK = 0x03,
+	HDMI_FC_MASK2_LOW_PRIORITY_OVERFLOW = 0x02,
+	HDMI_FC_MASK2_HIGH_PRIORITY_OVERFLOW = 0x01,
+
+/* FC_PRCONF field values */
+	HDMI_FC_PRCONF_INCOMING_PR_FACTOR_MASK = 0xF0,
+	HDMI_FC_PRCONF_INCOMING_PR_FACTOR_OFFSET = 4,
+	HDMI_FC_PRCONF_OUTPUT_PR_FACTOR_MASK = 0x0F,
+	HDMI_FC_PRCONF_OUTPUT_PR_FACTOR_OFFSET = 0,
+
+/* FC_AVICONF0-FC_AVICONF3 field values */
+	HDMI_FC_AVICONF0_PIX_FMT_MASK = 0x03,
+	HDMI_FC_AVICONF0_PIX_FMT_RGB = 0x00,
+	HDMI_FC_AVICONF0_PIX_FMT_YCBCR422 = 0x01,
+	HDMI_FC_AVICONF0_PIX_FMT_YCBCR444 = 0x02,
+	HDMI_FC_AVICONF0_ACTIVE_FMT_MASK = 0x40,
+	HDMI_FC_AVICONF0_ACTIVE_FMT_INFO_PRESENT = 0x40,
+	HDMI_FC_AVICONF0_ACTIVE_FMT_NO_INFO = 0x00,
+	HDMI_FC_AVICONF0_BAR_DATA_MASK = 0x0C,
+	HDMI_FC_AVICONF0_BAR_DATA_NO_DATA = 0x00,
+	HDMI_FC_AVICONF0_BAR_DATA_VERT_BAR = 0x04,
+	HDMI_FC_AVICONF0_BAR_DATA_HORIZ_BAR = 0x08,
+	HDMI_FC_AVICONF0_BAR_DATA_VERT_HORIZ_BAR = 0x0C,
+	HDMI_FC_AVICONF0_SCAN_INFO_MASK = 0x30,
+	HDMI_FC_AVICONF0_SCAN_INFO_OVERSCAN = 0x10,
+	HDMI_FC_AVICONF0_SCAN_INFO_UNDERSCAN = 0x20,
+	HDMI_FC_AVICONF0_SCAN_INFO_NODATA = 0x00,
+
+	HDMI_FC_AVICONF1_ACTIVE_ASPECT_RATIO_MASK = 0x0F,
+	HDMI_FC_AVICONF1_ACTIVE_ASPECT_RATIO_USE_CODED = 0x08,
+	HDMI_FC_AVICONF1_ACTIVE_ASPECT_RATIO_4_3 = 0x09,
+	HDMI_FC_AVICONF1_ACTIVE_ASPECT_RATIO_16_9 = 0x0A,
+	HDMI_FC_AVICONF1_ACTIVE_ASPECT_RATIO_14_9 = 0x0B,
+	HDMI_FC_AVICONF1_CODED_ASPECT_RATIO_MASK = 0x30,
+	HDMI_FC_AVICONF1_CODED_ASPECT_RATIO_NO_DATA = 0x00,
+	HDMI_FC_AVICONF1_CODED_ASPECT_RATIO_4_3 = 0x10,
+	HDMI_FC_AVICONF1_CODED_ASPECT_RATIO_16_9 = 0x20,
+	HDMI_FC_AVICONF1_COLORIMETRY_MASK = 0xC0,
+	HDMI_FC_AVICONF1_COLORIMETRY_NO_DATA = 0x00,
+	HDMI_FC_AVICONF1_COLORIMETRY_SMPTE = 0x40,
+	HDMI_FC_AVICONF1_COLORIMETRY_ITUR = 0x80,
+	HDMI_FC_AVICONF1_COLORIMETRY_EXTENDED_INFO = 0xC0,
+
+	HDMI_FC_AVICONF2_SCALING_MASK = 0x03,
+	HDMI_FC_AVICONF2_SCALING_NONE = 0x00,
+	HDMI_FC_AVICONF2_SCALING_HORIZ = 0x01,
+	HDMI_FC_AVICONF2_SCALING_VERT = 0x02,
+	HDMI_FC_AVICONF2_SCALING_HORIZ_VERT = 0x03,
+	HDMI_FC_AVICONF2_RGB_QUANT_MASK = 0x0C,
+	HDMI_FC_AVICONF2_RGB_QUANT_DEFAULT = 0x00,
+	HDMI_FC_AVICONF2_RGB_QUANT_LIMITED_RANGE = 0x04,
+	HDMI_FC_AVICONF2_RGB_QUANT_FULL_RANGE = 0x08,
+	HDMI_FC_AVICONF2_EXT_COLORIMETRY_MASK = 0x70,
+	HDMI_FC_AVICONF2_EXT_COLORIMETRY_XVYCC601 = 0x00,
+	HDMI_FC_AVICONF2_EXT_COLORIMETRY_XVYCC709 = 0x10,
+	HDMI_FC_AVICONF2_EXT_COLORIMETRY_SYCC601 = 0x20,
+	HDMI_FC_AVICONF2_EXT_COLORIMETRY_ADOBE_YCC601 = 0x30,
+	HDMI_FC_AVICONF2_EXT_COLORIMETRY_ADOBE_RGB = 0x40,
+	HDMI_FC_AVICONF2_IT_CONTENT_MASK = 0x80,
+	HDMI_FC_AVICONF2_IT_CONTENT_NO_DATA = 0x00,
+	HDMI_FC_AVICONF2_IT_CONTENT_VALID = 0x80,
+
+	HDMI_FC_AVICONF3_IT_CONTENT_TYPE_MASK = 0x03,
+	HDMI_FC_AVICONF3_IT_CONTENT_TYPE_GRAPHICS = 0x00,
+	HDMI_FC_AVICONF3_IT_CONTENT_TYPE_PHOTO = 0x01,
+	HDMI_FC_AVICONF3_IT_CONTENT_TYPE_CINEMA = 0x02,
+	HDMI_FC_AVICONF3_IT_CONTENT_TYPE_GAME = 0x03,
+	HDMI_FC_AVICONF3_QUANT_RANGE_MASK = 0x0C,
+	HDMI_FC_AVICONF3_QUANT_RANGE_LIMITED = 0x00,
+	HDMI_FC_AVICONF3_QUANT_RANGE_FULL = 0x04,
+
+/* FC_DBGFORCE field values */
+	HDMI_FC_DBGFORCE_FORCEAUDIO = 0x10,
+	HDMI_FC_DBGFORCE_FORCEVIDEO = 0x1,
+
+/* FC_DATAUTO0 field values */
+	HDMI_FC_DATAUTO0_VSD_MASK = 0x08,
+	HDMI_FC_DATAUTO0_VSD_OFFSET = 3,
+
+/* PHY_CONF0 field values */
+	HDMI_PHY_CONF0_PDZ_MASK = 0x80,
+	HDMI_PHY_CONF0_PDZ_OFFSET = 7,
+	HDMI_PHY_CONF0_ENTMDS_MASK = 0x40,
+	HDMI_PHY_CONF0_ENTMDS_OFFSET = 6,
+	HDMI_PHY_CONF0_SVSRET_MASK = 0x20,
+	HDMI_PHY_CONF0_SVSRET_OFFSET = 5,
+	HDMI_PHY_CONF0_GEN2_PDDQ_MASK = 0x10,
+	HDMI_PHY_CONF0_GEN2_PDDQ_OFFSET = 4,
+	HDMI_PHY_CONF0_GEN2_TXPWRON_MASK = 0x8,
+	HDMI_PHY_CONF0_GEN2_TXPWRON_OFFSET = 3,
+	HDMI_PHY_CONF0_GEN2_ENHPDRXSENSE_MASK = 0x4,
+	HDMI_PHY_CONF0_GEN2_ENHPDRXSENSE_OFFSET = 2,
+	HDMI_PHY_CONF0_SELDATAENPOL_MASK = 0x2,
+	HDMI_PHY_CONF0_SELDATAENPOL_OFFSET = 1,
+	HDMI_PHY_CONF0_SELDIPIF_MASK = 0x1,
+	HDMI_PHY_CONF0_SELDIPIF_OFFSET = 0,
+
+/* PHY_TST0 field values */
+	HDMI_PHY_TST0_TSTCLR_MASK = 0x20,
+	HDMI_PHY_TST0_TSTCLR_OFFSET = 5,
+	HDMI_PHY_TST0_TSTEN_MASK = 0x10,
+	HDMI_PHY_TST0_TSTEN_OFFSET = 4,
+	HDMI_PHY_TST0_TSTCLK_MASK = 0x1,
+	HDMI_PHY_TST0_TSTCLK_OFFSET = 0,
+
+/* PHY_STAT0 field values */
+	HDMI_PHY_RX_SENSE3 = 0x80,
+	HDMI_PHY_RX_SENSE2 = 0x40,
+	HDMI_PHY_RX_SENSE1 = 0x20,
+	HDMI_PHY_RX_SENSE0 = 0x10,
+	HDMI_PHY_HPD = 0x02,
+	HDMI_PHY_TX_PHY_LOCK = 0x01,
+
+/* PHY_I2CM_SLAVE_ADDR field values */
+	HDMI_PHY_I2CM_SLAVE_ADDR_PHY_GEN2 = 0x69,
+	HDMI_PHY_I2CM_SLAVE_ADDR_HEAC_PHY = 0x49,
+
+/* PHY_I2CM_OPERATION_ADDR field values */
+	HDMI_PHY_I2CM_OPERATION_ADDR_WRITE = 0x10,
+	HDMI_PHY_I2CM_OPERATION_ADDR_READ = 0x1,
+
+/* HDMI_PHY_I2CM_INT_ADDR */
+	HDMI_PHY_I2CM_INT_ADDR_DONE_POL = 0x08,
+	HDMI_PHY_I2CM_INT_ADDR_DONE_MASK = 0x04,
+
+/* HDMI_PHY_I2CM_CTLINT_ADDR */
+	HDMI_PHY_I2CM_CTLINT_ADDR_NAC_POL = 0x80,
+	HDMI_PHY_I2CM_CTLINT_ADDR_NAC_MASK = 0x40,
+	HDMI_PHY_I2CM_CTLINT_ADDR_ARBITRATION_POL = 0x08,
+	HDMI_PHY_I2CM_CTLINT_ADDR_ARBITRATION_MASK = 0x04,
+
+/* AUD_CONF0 field values */
+	HDMI_AUD_CONF0_SW_RESET = 0x80,
+	HDMI_AUD_CONF0_I2S_ALL_ENABLE = 0x2F,
+
+/* AUD_CONF1 field values */
+	HDMI_AUD_CONF1_MODE_I2S = 0x00,
+	HDMI_AUD_CONF1_MODE_RIGHT_J = 0x02,
+	HDMI_AUD_CONF1_MODE_LEFT_J = 0x04,
+	HDMI_AUD_CONF1_WIDTH_16 = 0x10,
+	HDMI_AUD_CONF1_WIDTH_24 = 0x18,
+
+/* AUD_CTS3 field values */
+	HDMI_AUD_CTS3_N_SHIFT_OFFSET = 5,
+	HDMI_AUD_CTS3_N_SHIFT_MASK = 0xe0,
+	HDMI_AUD_CTS3_N_SHIFT_1 = 0,
+	HDMI_AUD_CTS3_N_SHIFT_16 = 0x20,
+	HDMI_AUD_CTS3_N_SHIFT_32 = 0x40,
+	HDMI_AUD_CTS3_N_SHIFT_64 = 0x60,
+	HDMI_AUD_CTS3_N_SHIFT_128 = 0x80,
+	HDMI_AUD_CTS3_N_SHIFT_256 = 0xa0,
+	/* note that the CTS3 MANUAL bit has been removed
+	   from our part. Can't set it, will read as 0. */
+	HDMI_AUD_CTS3_CTS_MANUAL = 0x10,
+	HDMI_AUD_CTS3_AUDCTS19_16_MASK = 0x0f,
+
+/* HDMI_AUD_INPUTCLKFS field values */
+	HDMI_AUD_INPUTCLKFS_128FS = 0,
+	HDMI_AUD_INPUTCLKFS_256FS = 1,
+	HDMI_AUD_INPUTCLKFS_512FS = 2,
+	HDMI_AUD_INPUTCLKFS_64FS = 4,
+
+/* AHB_DMA_CONF0 field values */
+	HDMI_AHB_DMA_CONF0_SW_FIFO_RST_OFFSET = 7,
+	HDMI_AHB_DMA_CONF0_SW_FIFO_RST_MASK = 0x80,
+	HDMI_AHB_DMA_CONF0_HBR = 0x10,
+	HDMI_AHB_DMA_CONF0_EN_HLOCK_OFFSET = 3,
+	HDMI_AHB_DMA_CONF0_EN_HLOCK_MASK = 0x08,
+	HDMI_AHB_DMA_CONF0_INCR_TYPE_OFFSET = 1,
+	HDMI_AHB_DMA_CONF0_INCR_TYPE_MASK = 0x06,
+	HDMI_AHB_DMA_CONF0_INCR4 = 0x0,
+	HDMI_AHB_DMA_CONF0_INCR8 = 0x2,
+	HDMI_AHB_DMA_CONF0_INCR16 = 0x4,
+	HDMI_AHB_DMA_CONF0_BURST_MODE = 0x1,
+
+/* HDMI_AHB_DMA_START field values */
+	HDMI_AHB_DMA_START_START_OFFSET = 0,
+	HDMI_AHB_DMA_START_START_MASK = 0x01,
+
+/* HDMI_AHB_DMA_STOP field values */
+	HDMI_AHB_DMA_STOP_STOP_OFFSET = 0,
+	HDMI_AHB_DMA_STOP_STOP_MASK = 0x01,
+
+/* AHB_DMA_STAT, AHB_DMA_INT, AHB_DMA_MASK, AHB_DMA_POL field values */
+	HDMI_AHB_DMA_DONE = 0x80,
+	HDMI_AHB_DMA_RETRY_SPLIT = 0x40,
+	HDMI_AHB_DMA_LOSTOWNERSHIP = 0x20,
+	HDMI_AHB_DMA_ERROR = 0x10,
+	HDMI_AHB_DMA_FIFO_THREMPTY = 0x04,
+	HDMI_AHB_DMA_FIFO_FULL = 0x02,
+	HDMI_AHB_DMA_FIFO_EMPTY = 0x01,
+
+/* AHB_DMA_BUFFSTAT, AHB_DMA_BUFFINT,AHB_DMA_BUFFMASK,AHB_DMA_BUFFPOL values */
+	HDMI_AHB_DMA_BUFFSTAT_FULL = 0x02,
+	HDMI_AHB_DMA_BUFFSTAT_EMPTY = 0x01,
+
+/* MC_CLKDIS field values */
+	HDMI_MC_CLKDIS_HDCPCLK_DISABLE = 0x40,
+	HDMI_MC_CLKDIS_CECCLK_DISABLE = 0x20,
+	HDMI_MC_CLKDIS_CSCCLK_DISABLE = 0x10,
+	HDMI_MC_CLKDIS_AUDCLK_DISABLE = 0x8,
+	HDMI_MC_CLKDIS_PREPCLK_DISABLE = 0x4,
+	HDMI_MC_CLKDIS_TMDSCLK_DISABLE = 0x2,
+	HDMI_MC_CLKDIS_PIXELCLK_DISABLE = 0x1,
+
+/* MC_SWRSTZ field values */
+	HDMI_MC_SWRSTZ_TMDSSWRST_REQ = 0x02,
+
+/* MC_FLOWCTRL field values */
+	HDMI_MC_FLOWCTRL_FEED_THROUGH_OFF_MASK = 0x1,
+	HDMI_MC_FLOWCTRL_FEED_THROUGH_OFF_CSC_IN_PATH = 0x1,
+	HDMI_MC_FLOWCTRL_FEED_THROUGH_OFF_CSC_BYPASS = 0x0,
+
+/* MC_PHYRSTZ field values */
+	HDMI_MC_PHYRSTZ_PHYRSTZ = 0x01,
+
+/* MC_HEACPHY_RST field values */
+	HDMI_MC_HEACPHY_RST_ASSERT = 0x1,
+	HDMI_MC_HEACPHY_RST_DEASSERT = 0x0,
+
+/* CSC_CFG field values */
+	HDMI_CSC_CFG_INTMODE_MASK = 0x30,
+	HDMI_CSC_CFG_INTMODE_OFFSET = 4,
+	HDMI_CSC_CFG_INTMODE_DISABLE = 0x00,
+	HDMI_CSC_CFG_INTMODE_CHROMA_INT_FORMULA1 = 0x10,
+	HDMI_CSC_CFG_INTMODE_CHROMA_INT_FORMULA2 = 0x20,
+	HDMI_CSC_CFG_DECMODE_MASK = 0x3,
+	HDMI_CSC_CFG_DECMODE_OFFSET = 0,
+	HDMI_CSC_CFG_DECMODE_DISABLE = 0x0,
+	HDMI_CSC_CFG_DECMODE_CHROMA_INT_FORMULA1 = 0x1,
+	HDMI_CSC_CFG_DECMODE_CHROMA_INT_FORMULA2 = 0x2,
+	HDMI_CSC_CFG_DECMODE_CHROMA_INT_FORMULA3 = 0x3,
+
+/* CSC_SCALE field values */
+	HDMI_CSC_SCALE_CSC_COLORDE_PTH_MASK = 0xF0,
+	HDMI_CSC_SCALE_CSC_COLORDE_PTH_24BPP = 0x00,
+	HDMI_CSC_SCALE_CSC_COLORDE_PTH_30BPP = 0x50,
+	HDMI_CSC_SCALE_CSC_COLORDE_PTH_36BPP = 0x60,
+	HDMI_CSC_SCALE_CSC_COLORDE_PTH_48BPP = 0x70,
+	HDMI_CSC_SCALE_CSCSCALE_MASK = 0x03,
+
+/* A_HDCPCFG0 field values */
+	HDMI_A_HDCPCFG0_ELVENA_MASK = 0x80,
+	HDMI_A_HDCPCFG0_ELVENA_ENABLE = 0x80,
+	HDMI_A_HDCPCFG0_ELVENA_DISABLE = 0x00,
+	HDMI_A_HDCPCFG0_I2CFASTMODE_MASK = 0x40,
+	HDMI_A_HDCPCFG0_I2CFASTMODE_ENABLE = 0x40,
+	HDMI_A_HDCPCFG0_I2CFASTMODE_DISABLE = 0x00,
+	HDMI_A_HDCPCFG0_BYPENCRYPTION_MASK = 0x20,
+	HDMI_A_HDCPCFG0_BYPENCRYPTION_ENABLE = 0x20,
+	HDMI_A_HDCPCFG0_BYPENCRYPTION_DISABLE = 0x00,
+	HDMI_A_HDCPCFG0_SYNCRICHECK_MASK = 0x10,
+	HDMI_A_HDCPCFG0_SYNCRICHECK_ENABLE = 0x10,
+	HDMI_A_HDCPCFG0_SYNCRICHECK_DISABLE = 0x00,
+	HDMI_A_HDCPCFG0_AVMUTE_MASK = 0x8,
+	HDMI_A_HDCPCFG0_AVMUTE_ENABLE = 0x8,
+	HDMI_A_HDCPCFG0_AVMUTE_DISABLE = 0x0,
+	HDMI_A_HDCPCFG0_RXDETECT_MASK = 0x4,
+	HDMI_A_HDCPCFG0_RXDETECT_ENABLE = 0x4,
+	HDMI_A_HDCPCFG0_RXDETECT_DISABLE = 0x0,
+	HDMI_A_HDCPCFG0_EN11FEATURE_MASK = 0x2,
+	HDMI_A_HDCPCFG0_EN11FEATURE_ENABLE = 0x2,
+	HDMI_A_HDCPCFG0_EN11FEATURE_DISABLE = 0x0,
+	HDMI_A_HDCPCFG0_HDMIDVI_MASK = 0x1,
+	HDMI_A_HDCPCFG0_HDMIDVI_HDMI = 0x1,
+	HDMI_A_HDCPCFG0_HDMIDVI_DVI = 0x0,
+
+/* A_HDCPCFG1 field values */
+	HDMI_A_HDCPCFG1_DISSHA1CHECK_MASK = 0x8,
+	HDMI_A_HDCPCFG1_DISSHA1CHECK_DISABLE = 0x8,
+	HDMI_A_HDCPCFG1_DISSHA1CHECK_ENABLE = 0x0,
+	HDMI_A_HDCPCFG1_PH2UPSHFTENC_MASK = 0x4,
+	HDMI_A_HDCPCFG1_PH2UPSHFTENC_ENABLE = 0x4,
+	HDMI_A_HDCPCFG1_PH2UPSHFTENC_DISABLE = 0x0,
+	HDMI_A_HDCPCFG1_ENCRYPTIONDISABLE_MASK = 0x2,
+	HDMI_A_HDCPCFG1_ENCRYPTIONDISABLE_DISABLE = 0x2,
+	HDMI_A_HDCPCFG1_ENCRYPTIONDISABLE_ENABLE = 0x0,
+	HDMI_A_HDCPCFG1_SWRESET_MASK = 0x1,
+	HDMI_A_HDCPCFG1_SWRESET_ASSERT = 0x0,
+
+/* A_VIDPOLCFG field values */
+	HDMI_A_VIDPOLCFG_UNENCRYPTCONF_MASK = 0x60,
+	HDMI_A_VIDPOLCFG_UNENCRYPTCONF_OFFSET = 5,
+	HDMI_A_VIDPOLCFG_DATAENPOL_MASK = 0x10,
+	HDMI_A_VIDPOLCFG_DATAENPOL_ACTIVE_HIGH = 0x10,
+	HDMI_A_VIDPOLCFG_DATAENPOL_ACTIVE_LOW = 0x0,
+	HDMI_A_VIDPOLCFG_VSYNCPOL_MASK = 0x8,
+	HDMI_A_VIDPOLCFG_VSYNCPOL_ACTIVE_HIGH = 0x8,
+	HDMI_A_VIDPOLCFG_VSYNCPOL_ACTIVE_LOW = 0x0,
+	HDMI_A_VIDPOLCFG_HSYNCPOL_MASK = 0x2,
+	HDMI_A_VIDPOLCFG_HSYNCPOL_ACTIVE_HIGH = 0x2,
+	HDMI_A_VIDPOLCFG_HSYNCPOL_ACTIVE_LOW = 0x0,
+
+/* I2CM_OPERATION field values */
+	HDMI_I2CM_OPERATION_WRITE = 0x10,
+	HDMI_I2CM_OPERATION_READ_EXT = 0x2,
+	HDMI_I2CM_OPERATION_READ = 0x1,
+
+/* I2CM_INT field values */
+	HDMI_I2CM_INT_DONE_POL = 0x8,
+	HDMI_I2CM_INT_DONE_MASK = 0x4,
+
+/* I2CM_CTLINT field values */
+	HDMI_I2CM_CTLINT_NAC_POL = 0x80,
+	HDMI_I2CM_CTLINT_NAC_MASK = 0x40,
+	HDMI_I2CM_CTLINT_ARB_POL = 0x8,
+	HDMI_I2CM_CTLINT_ARB_MASK = 0x4,
+};
+
+/*
+ * HDMI 3D TX PHY registers
+ */
+#define HDMI_3D_TX_PHY_PWRCTRL			0x00
+#define HDMI_3D_TX_PHY_SERDIVCTRL		0x01
+#define HDMI_3D_TX_PHY_SERCKCTRL		0x02
+#define HDMI_3D_TX_PHY_SERCKKILLCTRL		0x03
+#define HDMI_3D_TX_PHY_TXRESCTRL		0x04
+#define HDMI_3D_TX_PHY_CKCALCTRL		0x05
+#define HDMI_3D_TX_PHY_CPCE_CTRL		0x06
+#define HDMI_3D_TX_PHY_TXCLKMEASCTRL		0x07
+#define HDMI_3D_TX_PHY_TXMEASCTRL		0x08
+#define HDMI_3D_TX_PHY_CKSYMTXCTRL		0x09
+#define HDMI_3D_TX_PHY_CMPSEQCTRL		0x0a
+#define HDMI_3D_TX_PHY_CMPPWRCTRL		0x0b
+#define HDMI_3D_TX_PHY_CMPMODECTRL		0x0c
+#define HDMI_3D_TX_PHY_MEASCTRL			0x0d
+#define HDMI_3D_TX_PHY_VLEVCTRL			0x0e
+#define HDMI_3D_TX_PHY_D2ACTRL			0x0f
+#define HDMI_3D_TX_PHY_CURRCTRL			0x10
+#define HDMI_3D_TX_PHY_DRVANACTRL		0x11
+#define HDMI_3D_TX_PHY_PLLMEASCTRL		0x12
+#define HDMI_3D_TX_PHY_PLLPHBYCTRL		0x13
+#define HDMI_3D_TX_PHY_GRP_CTRL			0x14
+#define HDMI_3D_TX_PHY_GMPCTRL			0x15
+#define HDMI_3D_TX_PHY_MPLLMEASCTRL		0x16
+#define HDMI_3D_TX_PHY_MSM_CTRL			0x17
+#define HDMI_3D_TX_PHY_SCRPB_STATUS		0x18
+#define HDMI_3D_TX_PHY_TXTERM			0x19
+#define HDMI_3D_TX_PHY_PTRPT_ENBL		0x1a
+#define HDMI_3D_TX_PHY_PATTERNGEN		0x1b
+#define HDMI_3D_TX_PHY_SDCAP_MODE		0x1c
+#define HDMI_3D_TX_PHY_SCOPEMODE		0x1d
+#define HDMI_3D_TX_PHY_DIGTXMODE		0x1e
+#define HDMI_3D_TX_PHY_STR_STATUS		0x1f
+#define HDMI_3D_TX_PHY_SCOPECNT0		0x20
+#define HDMI_3D_TX_PHY_SCOPECNT1		0x21
+#define HDMI_3D_TX_PHY_SCOPECNT2		0x22
+#define HDMI_3D_TX_PHY_SCOPECNTCLK		0x23
+#define HDMI_3D_TX_PHY_SCOPESAMPLE		0x24
+#define HDMI_3D_TX_PHY_SCOPECNTMSB01		0x25
+#define HDMI_3D_TX_PHY_SCOPECNTMSB2CK		0x26
+
+/* HDMI_3D_TX_PHY_CKCALCTRL values */
+#define HDMI_3D_TX_PHY_CKCALCTRL_OVERRIDE		BIT(15)
+
+/* HDMI_3D_TX_PHY_MSM_CTRL values */
+#define HDMI_3D_TX_PHY_MSM_CTRL_MPLL_PH_SEL_CK		BIT(13)
+#define HDMI_3D_TX_PHY_MSM_CTRL_CKO_SEL_CLK_REF_MPLL	(0 << 1)
+#define HDMI_3D_TX_PHY_MSM_CTRL_CKO_SEL_OFF		(1 << 1)
+#define HDMI_3D_TX_PHY_MSM_CTRL_CKO_SEL_PCLK		(2 << 1)
+#define HDMI_3D_TX_PHY_MSM_CTRL_CKO_SEL_FB_CLK		(3 << 1)
+#define HDMI_3D_TX_PHY_MSM_CTRL_SCOPE_CK_SEL		BIT(0)
+
+/* HDMI_3D_TX_PHY_PTRPT_ENBL values */
+#define HDMI_3D_TX_PHY_PTRPT_ENBL_OVERRIDE		BIT(15)
+#define HDMI_3D_TX_PHY_PTRPT_ENBL_PG_SKIP_BIT2		BIT(8)
+#define HDMI_3D_TX_PHY_PTRPT_ENBL_PG_SKIP_BIT1		BIT(7)
+#define HDMI_3D_TX_PHY_PTRPT_ENBL_PG_SKIP_BIT0		BIT(6)
+#define HDMI_3D_TX_PHY_PTRPT_ENBL_CK_REF_ENB		BIT(5)
+#define HDMI_3D_TX_PHY_PTRPT_ENBL_RCAL_ENB		BIT(4)
+#define HDMI_3D_TX_PHY_PTRPT_ENBL_TX_CLK_ALIGN_ENB	BIT(3)
+#define HDMI_3D_TX_PHY_PTRPT_ENBL_TX_READY		BIT(2)
+#define HDMI_3D_TX_PHY_PTRPT_ENBL_CKO_WORD_ENB		BIT(1)
+#define HDMI_3D_TX_PHY_PTRPT_ENBL_REFCLK_ENB		BIT(0)
+
+#endif /* __DW_HDMI_H__ */
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
new file mode 100644
index 000000000..8b5f9241a
--- /dev/null
+++ b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
@@ -0,0 +1,1006 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2016, Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (C) STMicroelectronics SA 2017
+ *
+ * Modified by Philippe Cornu <philippe.cornu@st.com>
+ * This generic Synopsys DesignWare MIPI DSI host driver is based on the
+ * Rockchip version from rockchip/dw-mipi-dsi.c with phy & bridge APIs.
+ */
+
+#include <linux/clk.h>
+#include <linux/component.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/reset.h>
+#include <drm/drmP.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_bridge.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_of.h>
+#include <drm/bridge/dw_mipi_dsi.h>
+#include <video/mipi_display.h>
+
+#define HWVER_131			0x31333100	/* IP version 1.31 */
+
+#define DSI_VERSION			0x00
+#define VERSION				GENMASK(31, 8)
+
+#define DSI_PWR_UP			0x04
+#define RESET				0
+#define POWERUP				BIT(0)
+
+#define DSI_CLKMGR_CFG			0x08
+#define TO_CLK_DIVISION(div)		(((div) & 0xff) << 8)
+#define TX_ESC_CLK_DIVISION(div)	((div) & 0xff)
+
+#define DSI_DPI_VCID			0x0c
+#define DPI_VCID(vcid)			((vcid) & 0x3)
+
+#define DSI_DPI_COLOR_CODING		0x10
+#define LOOSELY18_EN			BIT(8)
+#define DPI_COLOR_CODING_16BIT_1	0x0
+#define DPI_COLOR_CODING_16BIT_2	0x1
+#define DPI_COLOR_CODING_16BIT_3	0x2
+#define DPI_COLOR_CODING_18BIT_1	0x3
+#define DPI_COLOR_CODING_18BIT_2	0x4
+#define DPI_COLOR_CODING_24BIT		0x5
+
+#define DSI_DPI_CFG_POL			0x14
+#define COLORM_ACTIVE_LOW		BIT(4)
+#define SHUTD_ACTIVE_LOW		BIT(3)
+#define HSYNC_ACTIVE_LOW		BIT(2)
+#define VSYNC_ACTIVE_LOW		BIT(1)
+#define DATAEN_ACTIVE_LOW		BIT(0)
+
+#define DSI_DPI_LP_CMD_TIM		0x18
+#define OUTVACT_LPCMD_TIME(p)		(((p) & 0xff) << 16)
+#define INVACT_LPCMD_TIME(p)		((p) & 0xff)
+
+#define DSI_DBI_VCID			0x1c
+#define DSI_DBI_CFG			0x20
+#define DSI_DBI_PARTITIONING_EN		0x24
+#define DSI_DBI_CMDSIZE			0x28
+
+#define DSI_PCKHDL_CFG			0x2c
+#define CRC_RX_EN			BIT(4)
+#define ECC_RX_EN			BIT(3)
+#define BTA_EN				BIT(2)
+#define EOTP_RX_EN			BIT(1)
+#define EOTP_TX_EN			BIT(0)
+
+#define DSI_GEN_VCID			0x30
+
+#define DSI_MODE_CFG			0x34
+#define ENABLE_VIDEO_MODE		0
+#define ENABLE_CMD_MODE			BIT(0)
+
+#define DSI_VID_MODE_CFG		0x38
+#define ENABLE_LOW_POWER		(0x3f << 8)
+#define ENABLE_LOW_POWER_MASK		(0x3f << 8)
+#define VID_MODE_TYPE_NON_BURST_SYNC_PULSES	0x0
+#define VID_MODE_TYPE_NON_BURST_SYNC_EVENTS	0x1
+#define VID_MODE_TYPE_BURST			0x2
+#define VID_MODE_TYPE_MASK			0x3
+
+#define DSI_VID_PKT_SIZE		0x3c
+#define VID_PKT_SIZE(p)			((p) & 0x3fff)
+
+#define DSI_VID_NUM_CHUNKS		0x40
+#define VID_NUM_CHUNKS(c)		((c) & 0x1fff)
+
+#define DSI_VID_NULL_SIZE		0x44
+#define VID_NULL_SIZE(b)		((b) & 0x1fff)
+
+#define DSI_VID_HSA_TIME		0x48
+#define DSI_VID_HBP_TIME		0x4c
+#define DSI_VID_HLINE_TIME		0x50
+#define DSI_VID_VSA_LINES		0x54
+#define DSI_VID_VBP_LINES		0x58
+#define DSI_VID_VFP_LINES		0x5c
+#define DSI_VID_VACTIVE_LINES		0x60
+#define DSI_EDPI_CMD_SIZE		0x64
+
+#define DSI_CMD_MODE_CFG		0x68
+#define MAX_RD_PKT_SIZE_LP		BIT(24)
+#define DCS_LW_TX_LP			BIT(19)
+#define DCS_SR_0P_TX_LP			BIT(18)
+#define DCS_SW_1P_TX_LP			BIT(17)
+#define DCS_SW_0P_TX_LP			BIT(16)
+#define GEN_LW_TX_LP			BIT(14)
+#define GEN_SR_2P_TX_LP			BIT(13)
+#define GEN_SR_1P_TX_LP			BIT(12)
+#define GEN_SR_0P_TX_LP			BIT(11)
+#define GEN_SW_2P_TX_LP			BIT(10)
+#define GEN_SW_1P_TX_LP			BIT(9)
+#define GEN_SW_0P_TX_LP			BIT(8)
+#define ACK_RQST_EN			BIT(1)
+#define TEAR_FX_EN			BIT(0)
+
+#define CMD_MODE_ALL_LP			(MAX_RD_PKT_SIZE_LP | \
+					 DCS_LW_TX_LP | \
+					 DCS_SR_0P_TX_LP | \
+					 DCS_SW_1P_TX_LP | \
+					 DCS_SW_0P_TX_LP | \
+					 GEN_LW_TX_LP | \
+					 GEN_SR_2P_TX_LP | \
+					 GEN_SR_1P_TX_LP | \
+					 GEN_SR_0P_TX_LP | \
+					 GEN_SW_2P_TX_LP | \
+					 GEN_SW_1P_TX_LP | \
+					 GEN_SW_0P_TX_LP)
+
+#define DSI_GEN_HDR			0x6c
+#define DSI_GEN_PLD_DATA		0x70
+
+#define DSI_CMD_PKT_STATUS		0x74
+#define GEN_RD_CMD_BUSY			BIT(6)
+#define GEN_PLD_R_FULL			BIT(5)
+#define GEN_PLD_R_EMPTY			BIT(4)
+#define GEN_PLD_W_FULL			BIT(3)
+#define GEN_PLD_W_EMPTY			BIT(2)
+#define GEN_CMD_FULL			BIT(1)
+#define GEN_CMD_EMPTY			BIT(0)
+
+#define DSI_TO_CNT_CFG			0x78
+#define HSTX_TO_CNT(p)			(((p) & 0xffff) << 16)
+#define LPRX_TO_CNT(p)			((p) & 0xffff)
+
+#define DSI_HS_RD_TO_CNT		0x7c
+#define DSI_LP_RD_TO_CNT		0x80
+#define DSI_HS_WR_TO_CNT		0x84
+#define DSI_LP_WR_TO_CNT		0x88
+#define DSI_BTA_TO_CNT			0x8c
+
+#define DSI_LPCLK_CTRL			0x94
+#define AUTO_CLKLANE_CTRL		BIT(1)
+#define PHY_TXREQUESTCLKHS		BIT(0)
+
+#define DSI_PHY_TMR_LPCLK_CFG		0x98
+#define PHY_CLKHS2LP_TIME(lbcc)		(((lbcc) & 0x3ff) << 16)
+#define PHY_CLKLP2HS_TIME(lbcc)		((lbcc) & 0x3ff)
+
+#define DSI_PHY_TMR_CFG			0x9c
+#define PHY_HS2LP_TIME(lbcc)		(((lbcc) & 0xff) << 24)
+#define PHY_LP2HS_TIME(lbcc)		(((lbcc) & 0xff) << 16)
+#define MAX_RD_TIME(lbcc)		((lbcc) & 0x7fff)
+#define PHY_HS2LP_TIME_V131(lbcc)	(((lbcc) & 0x3ff) << 16)
+#define PHY_LP2HS_TIME_V131(lbcc)	((lbcc) & 0x3ff)
+
+#define DSI_PHY_RSTZ			0xa0
+#define PHY_DISFORCEPLL			0
+#define PHY_ENFORCEPLL			BIT(3)
+#define PHY_DISABLECLK			0
+#define PHY_ENABLECLK			BIT(2)
+#define PHY_RSTZ			0
+#define PHY_UNRSTZ			BIT(1)
+#define PHY_SHUTDOWNZ			0
+#define PHY_UNSHUTDOWNZ			BIT(0)
+
+#define DSI_PHY_IF_CFG			0xa4
+#define PHY_STOP_WAIT_TIME(cycle)	(((cycle) & 0xff) << 8)
+#define N_LANES(n)			(((n) - 1) & 0x3)
+
+#define DSI_PHY_ULPS_CTRL		0xa8
+#define DSI_PHY_TX_TRIGGERS		0xac
+
+#define DSI_PHY_STATUS			0xb0
+#define PHY_STOP_STATE_CLK_LANE		BIT(2)
+#define PHY_LOCK			BIT(0)
+
+#define DSI_PHY_TST_CTRL0		0xb4
+#define PHY_TESTCLK			BIT(1)
+#define PHY_UNTESTCLK			0
+#define PHY_TESTCLR			BIT(0)
+#define PHY_UNTESTCLR			0
+
+#define DSI_PHY_TST_CTRL1		0xb8
+#define PHY_TESTEN			BIT(16)
+#define PHY_UNTESTEN			0
+#define PHY_TESTDOUT(n)			(((n) & 0xff) << 8)
+#define PHY_TESTDIN(n)			((n) & 0xff)
+
+#define DSI_INT_ST0			0xbc
+#define DSI_INT_ST1			0xc0
+#define DSI_INT_MSK0			0xc4
+#define DSI_INT_MSK1			0xc8
+
+#define DSI_PHY_TMR_RD_CFG		0xf4
+#define MAX_RD_TIME_V131(lbcc)		((lbcc) & 0x7fff)
+
+#define PHY_STATUS_TIMEOUT_US		10000
+#define CMD_PKT_STATUS_TIMEOUT_US	20000
+
+struct dw_mipi_dsi {
+	struct drm_bridge bridge;
+	struct mipi_dsi_host dsi_host;
+	struct drm_bridge *panel_bridge;
+	struct device *dev;
+	void __iomem *base;
+
+	struct clk *pclk;
+
+	unsigned int lane_mbps; /* per lane */
+	u32 channel;
+	u32 lanes;
+	u32 format;
+	unsigned long mode_flags;
+
+	const struct dw_mipi_dsi_plat_data *plat_data;
+};
+
+/*
+ * The controller should generate 2 frames before
+ * preparing the peripheral.
+ */
+static void dw_mipi_dsi_wait_for_two_frames(struct drm_display_mode *mode)
+{
+	int refresh, two_frames;
+
+	refresh = drm_mode_vrefresh(mode);
+	two_frames = DIV_ROUND_UP(MSEC_PER_SEC, refresh) * 2;
+	msleep(two_frames);
+}
+
+static inline struct dw_mipi_dsi *host_to_dsi(struct mipi_dsi_host *host)
+{
+	return container_of(host, struct dw_mipi_dsi, dsi_host);
+}
+
+static inline struct dw_mipi_dsi *bridge_to_dsi(struct drm_bridge *bridge)
+{
+	return container_of(bridge, struct dw_mipi_dsi, bridge);
+}
+
+static inline void dsi_write(struct dw_mipi_dsi *dsi, u32 reg, u32 val)
+{
+	writel(val, dsi->base + reg);
+}
+
+static inline u32 dsi_read(struct dw_mipi_dsi *dsi, u32 reg)
+{
+	return readl(dsi->base + reg);
+}
+
+static int dw_mipi_dsi_host_attach(struct mipi_dsi_host *host,
+				   struct mipi_dsi_device *device)
+{
+	struct dw_mipi_dsi *dsi = host_to_dsi(host);
+	struct drm_bridge *bridge;
+	struct drm_panel *panel;
+	int ret;
+
+	if (device->lanes > dsi->plat_data->max_data_lanes) {
+		dev_err(dsi->dev, "the number of data lanes(%u) is too many\n",
+			device->lanes);
+		return -EINVAL;
+	}
+
+	dsi->lanes = device->lanes;
+	dsi->channel = device->channel;
+	dsi->format = device->format;
+	dsi->mode_flags = device->mode_flags;
+
+	ret = drm_of_find_panel_or_bridge(host->dev->of_node, 1, 0,
+					  &panel, &bridge);
+	if (ret)
+		return ret;
+
+	if (panel) {
+		bridge = drm_panel_bridge_add(panel, DRM_MODE_CONNECTOR_DSI);
+		if (IS_ERR(bridge))
+			return PTR_ERR(bridge);
+	}
+
+	dsi->panel_bridge = bridge;
+
+	drm_bridge_add(&dsi->bridge);
+
+	return 0;
+}
+
+static int dw_mipi_dsi_host_detach(struct mipi_dsi_host *host,
+				   struct mipi_dsi_device *device)
+{
+	struct dw_mipi_dsi *dsi = host_to_dsi(host);
+
+	drm_of_panel_bridge_remove(host->dev->of_node, 1, 0);
+
+	drm_bridge_remove(&dsi->bridge);
+
+	return 0;
+}
+
+static void dw_mipi_message_config(struct dw_mipi_dsi *dsi,
+				   const struct mipi_dsi_msg *msg)
+{
+	bool lpm = msg->flags & MIPI_DSI_MSG_USE_LPM;
+	u32 val = 0;
+
+	if (msg->flags & MIPI_DSI_MSG_REQ_ACK)
+		val |= ACK_RQST_EN;
+	if (lpm)
+		val |= CMD_MODE_ALL_LP;
+
+	dsi_write(dsi, DSI_CMD_MODE_CFG, val);
+}
+
+static int dw_mipi_dsi_gen_pkt_hdr_write(struct dw_mipi_dsi *dsi, u32 hdr_val)
+{
+	int ret;
+	u32 val, mask;
+
+	ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
+				 val, !(val & GEN_CMD_FULL), 1000,
+				 CMD_PKT_STATUS_TIMEOUT_US);
+	if (ret) {
+		dev_err(dsi->dev, "failed to get available command FIFO\n");
+		return ret;
+	}
+
+	dsi_write(dsi, DSI_GEN_HDR, hdr_val);
+
+	mask = GEN_CMD_EMPTY | GEN_PLD_W_EMPTY;
+	ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
+				 val, (val & mask) == mask,
+				 1000, CMD_PKT_STATUS_TIMEOUT_US);
+	if (ret) {
+		dev_err(dsi->dev, "failed to write command FIFO\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int dw_mipi_dsi_write(struct dw_mipi_dsi *dsi,
+			     const struct mipi_dsi_packet *packet)
+{
+	const u8 *tx_buf = packet->payload;
+	int len = packet->payload_length, pld_data_bytes = sizeof(u32), ret;
+	__le32 word;
+	u32 val;
+
+	while (len) {
+		if (len < pld_data_bytes) {
+			word = 0;
+			memcpy(&word, tx_buf, len);
+			dsi_write(dsi, DSI_GEN_PLD_DATA, le32_to_cpu(word));
+			len = 0;
+		} else {
+			memcpy(&word, tx_buf, pld_data_bytes);
+			dsi_write(dsi, DSI_GEN_PLD_DATA, le32_to_cpu(word));
+			tx_buf += pld_data_bytes;
+			len -= pld_data_bytes;
+		}
+
+		ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
+					 val, !(val & GEN_PLD_W_FULL), 1000,
+					 CMD_PKT_STATUS_TIMEOUT_US);
+		if (ret) {
+			dev_err(dsi->dev,
+				"failed to get available write payload FIFO\n");
+			return ret;
+		}
+	}
+
+	word = 0;
+	memcpy(&word, packet->header, sizeof(packet->header));
+	return dw_mipi_dsi_gen_pkt_hdr_write(dsi, le32_to_cpu(word));
+}
+
+static int dw_mipi_dsi_read(struct dw_mipi_dsi *dsi,
+			    const struct mipi_dsi_msg *msg)
+{
+	int i, j, ret, len = msg->rx_len;
+	u8 *buf = msg->rx_buf;
+	u32 val;
+
+	/* Wait end of the read operation */
+	ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
+				 val, !(val & GEN_RD_CMD_BUSY),
+				 1000, CMD_PKT_STATUS_TIMEOUT_US);
+	if (ret) {
+		dev_err(dsi->dev, "Timeout during read operation\n");
+		return ret;
+	}
+
+	for (i = 0; i < len; i += 4) {
+		/* Read fifo must not be empty before all bytes are read */
+		ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
+					 val, !(val & GEN_PLD_R_EMPTY),
+					 1000, CMD_PKT_STATUS_TIMEOUT_US);
+		if (ret) {
+			dev_err(dsi->dev, "Read payload FIFO is empty\n");
+			return ret;
+		}
+
+		val = dsi_read(dsi, DSI_GEN_PLD_DATA);
+		for (j = 0; j < 4 && j + i < len; j++)
+			buf[i + j] = val >> (8 * j);
+	}
+
+	return ret;
+}
+
+static ssize_t dw_mipi_dsi_host_transfer(struct mipi_dsi_host *host,
+					 const struct mipi_dsi_msg *msg)
+{
+	struct dw_mipi_dsi *dsi = host_to_dsi(host);
+	struct mipi_dsi_packet packet;
+	int ret, nb_bytes;
+
+	ret = mipi_dsi_create_packet(&packet, msg);
+	if (ret) {
+		dev_err(dsi->dev, "failed to create packet: %d\n", ret);
+		return ret;
+	}
+
+	dw_mipi_message_config(dsi, msg);
+
+	ret = dw_mipi_dsi_write(dsi, &packet);
+	if (ret)
+		return ret;
+
+	if (msg->rx_buf && msg->rx_len) {
+		ret = dw_mipi_dsi_read(dsi, msg);
+		if (ret)
+			return ret;
+		nb_bytes = msg->rx_len;
+	} else {
+		nb_bytes = packet.size;
+	}
+
+	return nb_bytes;
+}
+
+static const struct mipi_dsi_host_ops dw_mipi_dsi_host_ops = {
+	.attach = dw_mipi_dsi_host_attach,
+	.detach = dw_mipi_dsi_host_detach,
+	.transfer = dw_mipi_dsi_host_transfer,
+};
+
+static void dw_mipi_dsi_video_mode_config(struct dw_mipi_dsi *dsi)
+{
+	u32 val;
+
+	/*
+	 * TODO dw drv improvements
+	 * enabling low power is panel-dependent, we should use the
+	 * panel configuration here...
+	 */
+	val = ENABLE_LOW_POWER;
+
+	if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST)
+		val |= VID_MODE_TYPE_BURST;
+	else if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE)
+		val |= VID_MODE_TYPE_NON_BURST_SYNC_PULSES;
+	else
+		val |= VID_MODE_TYPE_NON_BURST_SYNC_EVENTS;
+
+	dsi_write(dsi, DSI_VID_MODE_CFG, val);
+}
+
+static void dw_mipi_dsi_set_mode(struct dw_mipi_dsi *dsi,
+				 unsigned long mode_flags)
+{
+	u32 val;
+
+	dsi_write(dsi, DSI_PWR_UP, RESET);
+
+	if (mode_flags & MIPI_DSI_MODE_VIDEO) {
+		dsi_write(dsi, DSI_MODE_CFG, ENABLE_VIDEO_MODE);
+		dw_mipi_dsi_video_mode_config(dsi);
+	} else {
+		dsi_write(dsi, DSI_MODE_CFG, ENABLE_CMD_MODE);
+	}
+
+	val = PHY_TXREQUESTCLKHS;
+	if (dsi->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS)
+		val |= AUTO_CLKLANE_CTRL;
+	dsi_write(dsi, DSI_LPCLK_CTRL, val);
+
+	dsi_write(dsi, DSI_PWR_UP, POWERUP);
+}
+
+static void dw_mipi_dsi_disable(struct dw_mipi_dsi *dsi)
+{
+	dsi_write(dsi, DSI_PWR_UP, RESET);
+	dsi_write(dsi, DSI_PHY_RSTZ, PHY_RSTZ);
+}
+
+static void dw_mipi_dsi_init(struct dw_mipi_dsi *dsi)
+{
+	/*
+	 * The maximum permitted escape clock is 20MHz and it is derived from
+	 * lanebyteclk, which is running at "lane_mbps / 8".  Thus we want:
+	 *
+	 *     (lane_mbps >> 3) / esc_clk_division < 20
+	 * which is:
+	 *     (lane_mbps >> 3) / 20 > esc_clk_division
+	 */
+	u32 esc_clk_division = (dsi->lane_mbps >> 3) / 20 + 1;
+
+	dsi_write(dsi, DSI_PWR_UP, RESET);
+
+	/*
+	 * TODO dw drv improvements
+	 * timeout clock division should be computed with the
+	 * high speed transmission counter timeout and byte lane...
+	 */
+	dsi_write(dsi, DSI_CLKMGR_CFG, TO_CLK_DIVISION(10) |
+		  TX_ESC_CLK_DIVISION(esc_clk_division));
+}
+
+static void dw_mipi_dsi_dpi_config(struct dw_mipi_dsi *dsi,
+				   struct drm_display_mode *mode)
+{
+	u32 val = 0, color = 0;
+
+	switch (dsi->format) {
+	case MIPI_DSI_FMT_RGB888:
+		color = DPI_COLOR_CODING_24BIT;
+		break;
+	case MIPI_DSI_FMT_RGB666:
+		color = DPI_COLOR_CODING_18BIT_2 | LOOSELY18_EN;
+		break;
+	case MIPI_DSI_FMT_RGB666_PACKED:
+		color = DPI_COLOR_CODING_18BIT_1;
+		break;
+	case MIPI_DSI_FMT_RGB565:
+		color = DPI_COLOR_CODING_16BIT_1;
+		break;
+	}
+
+	if (mode->flags & DRM_MODE_FLAG_NVSYNC)
+		val |= VSYNC_ACTIVE_LOW;
+	if (mode->flags & DRM_MODE_FLAG_NHSYNC)
+		val |= HSYNC_ACTIVE_LOW;
+
+	dsi_write(dsi, DSI_DPI_VCID, DPI_VCID(dsi->channel));
+	dsi_write(dsi, DSI_DPI_COLOR_CODING, color);
+	dsi_write(dsi, DSI_DPI_CFG_POL, val);
+	/*
+	 * TODO dw drv improvements
+	 * largest packet sizes during hfp or during vsa/vpb/vfp
+	 * should be computed according to byte lane, lane number and only
+	 * if sending lp cmds in high speed is enable (PHY_TXREQUESTCLKHS)
+	 */
+	dsi_write(dsi, DSI_DPI_LP_CMD_TIM, OUTVACT_LPCMD_TIME(4)
+		  | INVACT_LPCMD_TIME(4));
+}
+
+static void dw_mipi_dsi_packet_handler_config(struct dw_mipi_dsi *dsi)
+{
+	dsi_write(dsi, DSI_PCKHDL_CFG, CRC_RX_EN | ECC_RX_EN | BTA_EN);
+}
+
+static void dw_mipi_dsi_video_packet_config(struct dw_mipi_dsi *dsi,
+					    struct drm_display_mode *mode)
+{
+	/*
+	 * TODO dw drv improvements
+	 * only burst mode is supported here. For non-burst video modes,
+	 * we should compute DSI_VID_PKT_SIZE, DSI_VCCR.NUMC &
+	 * DSI_VNPCR.NPSIZE... especially because this driver supports
+	 * non-burst video modes, see dw_mipi_dsi_video_mode_config()...
+	 */
+	dsi_write(dsi, DSI_VID_PKT_SIZE, VID_PKT_SIZE(mode->hdisplay));
+}
+
+static void dw_mipi_dsi_command_mode_config(struct dw_mipi_dsi *dsi)
+{
+	/*
+	 * TODO dw drv improvements
+	 * compute high speed transmission counter timeout according
+	 * to the timeout clock division (TO_CLK_DIVISION) and byte lane...
+	 */
+	dsi_write(dsi, DSI_TO_CNT_CFG, HSTX_TO_CNT(1000) | LPRX_TO_CNT(1000));
+	/*
+	 * TODO dw drv improvements
+	 * the Bus-Turn-Around Timeout Counter should be computed
+	 * according to byte lane...
+	 */
+	dsi_write(dsi, DSI_BTA_TO_CNT, 0xd00);
+	dsi_write(dsi, DSI_MODE_CFG, ENABLE_CMD_MODE);
+}
+
+/* Get lane byte clock cycles. */
+static u32 dw_mipi_dsi_get_hcomponent_lbcc(struct dw_mipi_dsi *dsi,
+					   struct drm_display_mode *mode,
+					   u32 hcomponent)
+{
+	u32 frac, lbcc;
+
+	lbcc = hcomponent * dsi->lane_mbps * MSEC_PER_SEC / 8;
+
+	frac = lbcc % mode->clock;
+	lbcc = lbcc / mode->clock;
+	if (frac)
+		lbcc++;
+
+	return lbcc;
+}
+
+static void dw_mipi_dsi_line_timer_config(struct dw_mipi_dsi *dsi,
+					  struct drm_display_mode *mode)
+{
+	u32 htotal, hsa, hbp, lbcc;
+
+	htotal = mode->htotal;
+	hsa = mode->hsync_end - mode->hsync_start;
+	hbp = mode->htotal - mode->hsync_end;
+
+	/*
+	 * TODO dw drv improvements
+	 * computations below may be improved...
+	 */
+	lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, htotal);
+	dsi_write(dsi, DSI_VID_HLINE_TIME, lbcc);
+
+	lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, hsa);
+	dsi_write(dsi, DSI_VID_HSA_TIME, lbcc);
+
+	lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, hbp);
+	dsi_write(dsi, DSI_VID_HBP_TIME, lbcc);
+}
+
+static void dw_mipi_dsi_vertical_timing_config(struct dw_mipi_dsi *dsi,
+					       struct drm_display_mode *mode)
+{
+	u32 vactive, vsa, vfp, vbp;
+
+	vactive = mode->vdisplay;
+	vsa = mode->vsync_end - mode->vsync_start;
+	vfp = mode->vsync_start - mode->vdisplay;
+	vbp = mode->vtotal - mode->vsync_end;
+
+	dsi_write(dsi, DSI_VID_VACTIVE_LINES, vactive);
+	dsi_write(dsi, DSI_VID_VSA_LINES, vsa);
+	dsi_write(dsi, DSI_VID_VFP_LINES, vfp);
+	dsi_write(dsi, DSI_VID_VBP_LINES, vbp);
+}
+
+static void dw_mipi_dsi_dphy_timing_config(struct dw_mipi_dsi *dsi)
+{
+	u32 hw_version;
+
+	/*
+	 * TODO dw drv improvements
+	 * data & clock lane timers should be computed according to panel
+	 * blankings and to the automatic clock lane control mode...
+	 * note: DSI_PHY_TMR_CFG.MAX_RD_TIME should be in line with
+	 * DSI_CMD_MODE_CFG.MAX_RD_PKT_SIZE_LP (see CMD_MODE_ALL_LP)
+	 */
+
+	hw_version = dsi_read(dsi, DSI_VERSION) & VERSION;
+
+	if (hw_version >= HWVER_131) {
+		dsi_write(dsi, DSI_PHY_TMR_CFG, PHY_HS2LP_TIME_V131(0x40) |
+			  PHY_LP2HS_TIME_V131(0x40));
+		dsi_write(dsi, DSI_PHY_TMR_RD_CFG, MAX_RD_TIME_V131(10000));
+	} else {
+		dsi_write(dsi, DSI_PHY_TMR_CFG, PHY_HS2LP_TIME(0x40) |
+			  PHY_LP2HS_TIME(0x40) | MAX_RD_TIME(10000));
+	}
+
+	dsi_write(dsi, DSI_PHY_TMR_LPCLK_CFG, PHY_CLKHS2LP_TIME(0x40)
+		  | PHY_CLKLP2HS_TIME(0x40));
+}
+
+static void dw_mipi_dsi_dphy_interface_config(struct dw_mipi_dsi *dsi)
+{
+	/*
+	 * TODO dw drv improvements
+	 * stop wait time should be the maximum between host dsi
+	 * and panel stop wait times
+	 */
+	dsi_write(dsi, DSI_PHY_IF_CFG, PHY_STOP_WAIT_TIME(0x20) |
+		  N_LANES(dsi->lanes));
+}
+
+static void dw_mipi_dsi_dphy_init(struct dw_mipi_dsi *dsi)
+{
+	/* Clear PHY state */
+	dsi_write(dsi, DSI_PHY_RSTZ, PHY_DISFORCEPLL | PHY_DISABLECLK
+		  | PHY_RSTZ | PHY_SHUTDOWNZ);
+	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLR);
+	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLR);
+	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLR);
+}
+
+static void dw_mipi_dsi_dphy_enable(struct dw_mipi_dsi *dsi)
+{
+	u32 val;
+	int ret;
+
+	dsi_write(dsi, DSI_PHY_RSTZ, PHY_ENFORCEPLL | PHY_ENABLECLK |
+		  PHY_UNRSTZ | PHY_UNSHUTDOWNZ);
+
+	ret = readl_poll_timeout(dsi->base + DSI_PHY_STATUS, val,
+				 val & PHY_LOCK, 1000, PHY_STATUS_TIMEOUT_US);
+	if (ret)
+		DRM_DEBUG_DRIVER("failed to wait phy lock state\n");
+
+	ret = readl_poll_timeout(dsi->base + DSI_PHY_STATUS,
+				 val, val & PHY_STOP_STATE_CLK_LANE, 1000,
+				 PHY_STATUS_TIMEOUT_US);
+	if (ret)
+		DRM_DEBUG_DRIVER("failed to wait phy clk lane stop state\n");
+}
+
+static void dw_mipi_dsi_clear_err(struct dw_mipi_dsi *dsi)
+{
+	dsi_read(dsi, DSI_INT_ST0);
+	dsi_read(dsi, DSI_INT_ST1);
+	dsi_write(dsi, DSI_INT_MSK0, 0);
+	dsi_write(dsi, DSI_INT_MSK1, 0);
+}
+
+static void dw_mipi_dsi_bridge_post_disable(struct drm_bridge *bridge)
+{
+	struct dw_mipi_dsi *dsi = bridge_to_dsi(bridge);
+
+	/*
+	 * Switch to command mode before panel-bridge post_disable &
+	 * panel unprepare.
+	 * Note: panel-bridge disable & panel disable has been called
+	 * before by the drm framework.
+	 */
+	dw_mipi_dsi_set_mode(dsi, 0);
+
+	/*
+	 * TODO Only way found to call panel-bridge post_disable &
+	 * panel unprepare before the dsi "final" disable...
+	 * This needs to be fixed in the drm_bridge framework and the API
+	 * needs to be updated to manage our own call chains...
+	 */
+	dsi->panel_bridge->funcs->post_disable(dsi->panel_bridge);
+
+	dw_mipi_dsi_disable(dsi);
+	clk_disable_unprepare(dsi->pclk);
+	pm_runtime_put(dsi->dev);
+}
+
+static void dw_mipi_dsi_bridge_mode_set(struct drm_bridge *bridge,
+					struct drm_display_mode *mode,
+					struct drm_display_mode *adjusted_mode)
+{
+	struct dw_mipi_dsi *dsi = bridge_to_dsi(bridge);
+	const struct dw_mipi_dsi_phy_ops *phy_ops = dsi->plat_data->phy_ops;
+	void *priv_data = dsi->plat_data->priv_data;
+	int ret;
+
+	clk_prepare_enable(dsi->pclk);
+
+	ret = phy_ops->get_lane_mbps(priv_data, adjusted_mode, dsi->mode_flags,
+				     dsi->lanes, dsi->format, &dsi->lane_mbps);
+	if (ret)
+		DRM_DEBUG_DRIVER("Phy get_lane_mbps() failed\n");
+
+	pm_runtime_get_sync(dsi->dev);
+	dw_mipi_dsi_init(dsi);
+	dw_mipi_dsi_dpi_config(dsi, adjusted_mode);
+	dw_mipi_dsi_packet_handler_config(dsi);
+	dw_mipi_dsi_video_mode_config(dsi);
+	dw_mipi_dsi_video_packet_config(dsi, adjusted_mode);
+	dw_mipi_dsi_command_mode_config(dsi);
+	dw_mipi_dsi_line_timer_config(dsi, adjusted_mode);
+	dw_mipi_dsi_vertical_timing_config(dsi, adjusted_mode);
+
+	dw_mipi_dsi_dphy_init(dsi);
+	dw_mipi_dsi_dphy_timing_config(dsi);
+	dw_mipi_dsi_dphy_interface_config(dsi);
+
+	dw_mipi_dsi_clear_err(dsi);
+
+	ret = phy_ops->init(priv_data);
+	if (ret)
+		DRM_DEBUG_DRIVER("Phy init() failed\n");
+
+	dw_mipi_dsi_dphy_enable(dsi);
+
+	dw_mipi_dsi_wait_for_two_frames(adjusted_mode);
+
+	/* Switch to cmd mode for panel-bridge pre_enable & panel prepare */
+	dw_mipi_dsi_set_mode(dsi, 0);
+}
+
+static void dw_mipi_dsi_bridge_enable(struct drm_bridge *bridge)
+{
+	struct dw_mipi_dsi *dsi = bridge_to_dsi(bridge);
+
+	/* Switch to video mode for panel-bridge enable & panel enable */
+	dw_mipi_dsi_set_mode(dsi, MIPI_DSI_MODE_VIDEO);
+}
+
+static enum drm_mode_status
+dw_mipi_dsi_bridge_mode_valid(struct drm_bridge *bridge,
+			      const struct drm_display_mode *mode)
+{
+	struct dw_mipi_dsi *dsi = bridge_to_dsi(bridge);
+	const struct dw_mipi_dsi_plat_data *pdata = dsi->plat_data;
+	enum drm_mode_status mode_status = MODE_OK;
+
+	if (pdata->mode_valid)
+		mode_status = pdata->mode_valid(pdata->priv_data, mode);
+
+	return mode_status;
+}
+
+static int dw_mipi_dsi_bridge_attach(struct drm_bridge *bridge)
+{
+	struct dw_mipi_dsi *dsi = bridge_to_dsi(bridge);
+
+	if (!bridge->encoder) {
+		DRM_ERROR("Parent encoder object not found\n");
+		return -ENODEV;
+	}
+
+	/* Set the encoder type as caller does not know it */
+	bridge->encoder->encoder_type = DRM_MODE_ENCODER_DSI;
+
+	/* Attach the panel-bridge to the dsi bridge */
+	return drm_bridge_attach(bridge->encoder, dsi->panel_bridge, bridge);
+}
+
+static const struct drm_bridge_funcs dw_mipi_dsi_bridge_funcs = {
+	.mode_set     = dw_mipi_dsi_bridge_mode_set,
+	.enable	      = dw_mipi_dsi_bridge_enable,
+	.post_disable = dw_mipi_dsi_bridge_post_disable,
+	.mode_valid   = dw_mipi_dsi_bridge_mode_valid,
+	.attach	      = dw_mipi_dsi_bridge_attach,
+};
+
+static struct dw_mipi_dsi *
+__dw_mipi_dsi_probe(struct platform_device *pdev,
+		    const struct dw_mipi_dsi_plat_data *plat_data)
+{
+	struct device *dev = &pdev->dev;
+	struct reset_control *apb_rst;
+	struct dw_mipi_dsi *dsi;
+	struct resource *res;
+	int ret;
+
+	dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
+	if (!dsi)
+		return ERR_PTR(-ENOMEM);
+
+	dsi->dev = dev;
+	dsi->plat_data = plat_data;
+
+	if (!plat_data->phy_ops->init || !plat_data->phy_ops->get_lane_mbps) {
+		DRM_ERROR("Phy not properly configured\n");
+		return ERR_PTR(-ENODEV);
+	}
+
+	if (!plat_data->base) {
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+		if (!res)
+			return ERR_PTR(-ENODEV);
+
+		dsi->base = devm_ioremap_resource(dev, res);
+		if (IS_ERR(dsi->base))
+			return ERR_PTR(-ENODEV);
+
+	} else {
+		dsi->base = plat_data->base;
+	}
+
+	dsi->pclk = devm_clk_get(dev, "pclk");
+	if (IS_ERR(dsi->pclk)) {
+		ret = PTR_ERR(dsi->pclk);
+		dev_err(dev, "Unable to get pclk: %d\n", ret);
+		return ERR_PTR(ret);
+	}
+
+	/*
+	 * Note that the reset was not defined in the initial device tree, so
+	 * we have to be prepared for it not being found.
+	 */
+	apb_rst = devm_reset_control_get_optional_exclusive(dev, "apb");
+	if (IS_ERR(apb_rst)) {
+		ret = PTR_ERR(apb_rst);
+
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "Unable to get reset control: %d\n", ret);
+
+		return ERR_PTR(ret);
+	}
+
+	if (apb_rst) {
+		ret = clk_prepare_enable(dsi->pclk);
+		if (ret) {
+			dev_err(dev, "%s: Failed to enable pclk\n", __func__);
+			return ERR_PTR(ret);
+		}
+
+		reset_control_assert(apb_rst);
+		usleep_range(10, 20);
+		reset_control_deassert(apb_rst);
+
+		clk_disable_unprepare(dsi->pclk);
+	}
+
+	pm_runtime_enable(dev);
+
+	dsi->dsi_host.ops = &dw_mipi_dsi_host_ops;
+	dsi->dsi_host.dev = dev;
+	ret = mipi_dsi_host_register(&dsi->dsi_host);
+	if (ret) {
+		dev_err(dev, "Failed to register MIPI host: %d\n", ret);
+		return ERR_PTR(ret);
+	}
+
+	dsi->bridge.driver_private = dsi;
+	dsi->bridge.funcs = &dw_mipi_dsi_bridge_funcs;
+#ifdef CONFIG_OF
+	dsi->bridge.of_node = pdev->dev.of_node;
+#endif
+
+	return dsi;
+}
+
+static void __dw_mipi_dsi_remove(struct dw_mipi_dsi *dsi)
+{
+	pm_runtime_disable(dsi->dev);
+}
+
+/*
+ * Probe/remove API, used from platforms based on the DRM bridge API.
+ */
+struct dw_mipi_dsi *
+dw_mipi_dsi_probe(struct platform_device *pdev,
+		  const struct dw_mipi_dsi_plat_data *plat_data)
+{
+	return __dw_mipi_dsi_probe(pdev, plat_data);
+}
+EXPORT_SYMBOL_GPL(dw_mipi_dsi_probe);
+
+void dw_mipi_dsi_remove(struct dw_mipi_dsi *dsi)
+{
+	mipi_dsi_host_unregister(&dsi->dsi_host);
+
+	__dw_mipi_dsi_remove(dsi);
+}
+EXPORT_SYMBOL_GPL(dw_mipi_dsi_remove);
+
+/*
+ * Bind/unbind API, used from platforms based on the component framework.
+ */
+struct dw_mipi_dsi *
+dw_mipi_dsi_bind(struct platform_device *pdev, struct drm_encoder *encoder,
+		 const struct dw_mipi_dsi_plat_data *plat_data)
+{
+	struct dw_mipi_dsi *dsi;
+	int ret;
+
+	dsi = __dw_mipi_dsi_probe(pdev, plat_data);
+	if (IS_ERR(dsi))
+		return dsi;
+
+	ret = drm_bridge_attach(encoder, &dsi->bridge, NULL);
+	if (ret) {
+		dw_mipi_dsi_remove(dsi);
+		DRM_ERROR("Failed to initialize bridge with drm\n");
+		return ERR_PTR(ret);
+	}
+
+	return dsi;
+}
+EXPORT_SYMBOL_GPL(dw_mipi_dsi_bind);
+
+void dw_mipi_dsi_unbind(struct dw_mipi_dsi *dsi)
+{
+	__dw_mipi_dsi_remove(dsi);
+}
+EXPORT_SYMBOL_GPL(dw_mipi_dsi_unbind);
+
+MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
+MODULE_AUTHOR("Philippe Cornu <philippe.cornu@st.com>");
+MODULE_DESCRIPTION("DW MIPI DSI host controller driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:dw-mipi-dsi");
diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
new file mode 100644
index 000000000..d728b6cf6
--- /dev/null
+++ b/drivers/gpu/drm/bridge/tc358767.c
@@ -0,0 +1,1417 @@
+/*
+ * tc358767 eDP bridge driver
+ *
+ * Copyright (C) 2016 CogentEmbedded Inc
+ * Author: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
+ *
+ * Copyright (C) 2016 Pengutronix, Philipp Zabel <p.zabel@pengutronix.de>
+ *
+ * Copyright (C) 2016 Zodiac Inflight Innovations
+ *
+ * Initially based on: drivers/gpu/drm/i2c/tda998x_drv.c
+ *
+ * Copyright (C) 2012 Texas Instruments
+ * Author: Rob Clark <robdclark@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_dp_helper.h>
+#include <drm/drm_edid.h>
+#include <drm/drm_of.h>
+#include <drm/drm_panel.h>
+
+/* Registers */
+
+/* Display Parallel Interface */
+#define DPIPXLFMT		0x0440
+#define VS_POL_ACTIVE_LOW		(1 << 10)
+#define HS_POL_ACTIVE_LOW		(1 << 9)
+#define DE_POL_ACTIVE_HIGH		(0 << 8)
+#define SUB_CFG_TYPE_CONFIG1		(0 << 2) /* LSB aligned */
+#define SUB_CFG_TYPE_CONFIG2		(1 << 2) /* Loosely Packed */
+#define SUB_CFG_TYPE_CONFIG3		(2 << 2) /* LSB aligned 8-bit */
+#define DPI_BPP_RGB888			(0 << 0)
+#define DPI_BPP_RGB666			(1 << 0)
+#define DPI_BPP_RGB565			(2 << 0)
+
+/* Video Path */
+#define VPCTRL0			0x0450
+#define OPXLFMT_RGB666			(0 << 8)
+#define OPXLFMT_RGB888			(1 << 8)
+#define FRMSYNC_DISABLED		(0 << 4) /* Video Timing Gen Disabled */
+#define FRMSYNC_ENABLED			(1 << 4) /* Video Timing Gen Enabled */
+#define MSF_DISABLED			(0 << 0) /* Magic Square FRC disabled */
+#define MSF_ENABLED			(1 << 0) /* Magic Square FRC enabled */
+#define HTIM01			0x0454
+#define HTIM02			0x0458
+#define VTIM01			0x045c
+#define VTIM02			0x0460
+#define VFUEN0			0x0464
+#define VFUEN				BIT(0)   /* Video Frame Timing Upload */
+
+/* System */
+#define TC_IDREG		0x0500
+#define SYSCTRL			0x0510
+#define DP0_AUDSRC_NO_INPUT		(0 << 3)
+#define DP0_AUDSRC_I2S_RX		(1 << 3)
+#define DP0_VIDSRC_NO_INPUT		(0 << 0)
+#define DP0_VIDSRC_DSI_RX		(1 << 0)
+#define DP0_VIDSRC_DPI_RX		(2 << 0)
+#define DP0_VIDSRC_COLOR_BAR		(3 << 0)
+
+/* Control */
+#define DP0CTL			0x0600
+#define VID_MN_GEN			BIT(6)   /* Auto-generate M/N values */
+#define EF_EN				BIT(5)   /* Enable Enhanced Framing */
+#define VID_EN				BIT(1)   /* Video transmission enable */
+#define DP_EN				BIT(0)   /* Enable DPTX function */
+
+/* Clocks */
+#define DP0_VIDMNGEN0		0x0610
+#define DP0_VIDMNGEN1		0x0614
+#define DP0_VMNGENSTATUS	0x0618
+
+/* Main Channel */
+#define DP0_SECSAMPLE		0x0640
+#define DP0_VIDSYNCDELAY	0x0644
+#define DP0_TOTALVAL		0x0648
+#define DP0_STARTVAL		0x064c
+#define DP0_ACTIVEVAL		0x0650
+#define DP0_SYNCVAL		0x0654
+#define SYNCVAL_HS_POL_ACTIVE_LOW	(1 << 15)
+#define SYNCVAL_VS_POL_ACTIVE_LOW	(1 << 31)
+#define DP0_MISC		0x0658
+#define TU_SIZE_RECOMMENDED		(63) /* LSCLK cycles per TU */
+#define BPC_6				(0 << 5)
+#define BPC_8				(1 << 5)
+
+/* AUX channel */
+#define DP0_AUXCFG0		0x0660
+#define DP0_AUXCFG1		0x0664
+#define AUX_RX_FILTER_EN		BIT(16)
+
+#define DP0_AUXADDR		0x0668
+#define DP0_AUXWDATA(i)		(0x066c + (i) * 4)
+#define DP0_AUXRDATA(i)		(0x067c + (i) * 4)
+#define DP0_AUXSTATUS		0x068c
+#define AUX_STATUS_MASK			0xf0
+#define AUX_STATUS_SHIFT		4
+#define AUX_TIMEOUT			BIT(1)
+#define AUX_BUSY			BIT(0)
+#define DP0_AUXI2CADR		0x0698
+
+/* Link Training */
+#define DP0_SRCCTRL		0x06a0
+#define DP0_SRCCTRL_SCRMBLDIS		BIT(13)
+#define DP0_SRCCTRL_EN810B		BIT(12)
+#define DP0_SRCCTRL_NOTP		(0 << 8)
+#define DP0_SRCCTRL_TP1			(1 << 8)
+#define DP0_SRCCTRL_TP2			(2 << 8)
+#define DP0_SRCCTRL_LANESKEW		BIT(7)
+#define DP0_SRCCTRL_SSCG		BIT(3)
+#define DP0_SRCCTRL_LANES_1		(0 << 2)
+#define DP0_SRCCTRL_LANES_2		(1 << 2)
+#define DP0_SRCCTRL_BW27		(1 << 1)
+#define DP0_SRCCTRL_BW162		(0 << 1)
+#define DP0_SRCCTRL_AUTOCORRECT		BIT(0)
+#define DP0_LTSTAT		0x06d0
+#define LT_LOOPDONE			BIT(13)
+#define LT_STATUS_MASK			(0x1f << 8)
+#define LT_CHANNEL1_EQ_BITS		(DP_CHANNEL_EQ_BITS << 4)
+#define LT_INTERLANE_ALIGN_DONE		BIT(3)
+#define LT_CHANNEL0_EQ_BITS		(DP_CHANNEL_EQ_BITS)
+#define DP0_SNKLTCHGREQ		0x06d4
+#define DP0_LTLOOPCTRL		0x06d8
+#define DP0_SNKLTCTRL		0x06e4
+
+#define DP1_SRCCTRL		0x07a0
+
+/* PHY */
+#define DP_PHY_CTRL		0x0800
+#define DP_PHY_RST			BIT(28)  /* DP PHY Global Soft Reset */
+#define BGREN				BIT(25)  /* AUX PHY BGR Enable */
+#define PWR_SW_EN			BIT(24)  /* PHY Power Switch Enable */
+#define PHY_M1_RST			BIT(12)  /* Reset PHY1 Main Channel */
+#define PHY_RDY				BIT(16)  /* PHY Main Channels Ready */
+#define PHY_M0_RST			BIT(8)   /* Reset PHY0 Main Channel */
+#define PHY_2LANE			BIT(2)   /* PHY Enable 2 lanes */
+#define PHY_A0_EN			BIT(1)   /* PHY Aux Channel0 Enable */
+#define PHY_M0_EN			BIT(0)   /* PHY Main Channel0 Enable */
+
+/* PLL */
+#define DP0_PLLCTRL		0x0900
+#define DP1_PLLCTRL		0x0904	/* not defined in DS */
+#define PXL_PLLCTRL		0x0908
+#define PLLUPDATE			BIT(2)
+#define PLLBYP				BIT(1)
+#define PLLEN				BIT(0)
+#define PXL_PLLPARAM		0x0914
+#define IN_SEL_REFCLK			(0 << 14)
+#define SYS_PLLPARAM		0x0918
+#define REF_FREQ_38M4			(0 << 8) /* 38.4 MHz */
+#define REF_FREQ_19M2			(1 << 8) /* 19.2 MHz */
+#define REF_FREQ_26M			(2 << 8) /* 26 MHz */
+#define REF_FREQ_13M			(3 << 8) /* 13 MHz */
+#define SYSCLK_SEL_LSCLK		(0 << 4)
+#define LSCLK_DIV_1			(0 << 0)
+#define LSCLK_DIV_2			(1 << 0)
+
+/* Test & Debug */
+#define TSTCTL			0x0a00
+#define PLL_DBG			0x0a04
+
+static bool tc_test_pattern;
+module_param_named(test, tc_test_pattern, bool, 0644);
+
+struct tc_edp_link {
+	struct drm_dp_link	base;
+	u8			assr;
+	int			scrambler_dis;
+	int			spread;
+	int			coding8b10b;
+	u8			swing;
+	u8			preemp;
+};
+
+struct tc_data {
+	struct device		*dev;
+	struct regmap		*regmap;
+	struct drm_dp_aux	aux;
+
+	struct drm_bridge	bridge;
+	struct drm_connector	connector;
+	struct drm_panel	*panel;
+
+	/* link settings */
+	struct tc_edp_link	link;
+
+	/* display edid */
+	struct edid		*edid;
+	/* current mode */
+	struct drm_display_mode	*mode;
+
+	u32			rev;
+	u8			assr;
+
+	struct gpio_desc	*sd_gpio;
+	struct gpio_desc	*reset_gpio;
+	struct clk		*refclk;
+};
+
+static inline struct tc_data *aux_to_tc(struct drm_dp_aux *a)
+{
+	return container_of(a, struct tc_data, aux);
+}
+
+static inline struct tc_data *bridge_to_tc(struct drm_bridge *b)
+{
+	return container_of(b, struct tc_data, bridge);
+}
+
+static inline struct tc_data *connector_to_tc(struct drm_connector *c)
+{
+	return container_of(c, struct tc_data, connector);
+}
+
+/* Simple macros to avoid repeated error checks */
+#define tc_write(reg, var)					\
+	do {							\
+		ret = regmap_write(tc->regmap, reg, var);	\
+		if (ret)					\
+			goto err;				\
+	} while (0)
+#define tc_read(reg, var)					\
+	do {							\
+		ret = regmap_read(tc->regmap, reg, var);	\
+		if (ret)					\
+			goto err;				\
+	} while (0)
+
+static inline int tc_poll_timeout(struct regmap *map, unsigned int addr,
+				  unsigned int cond_mask,
+				  unsigned int cond_value,
+				  unsigned long sleep_us, u64 timeout_us)
+{
+	ktime_t timeout = ktime_add_us(ktime_get(), timeout_us);
+	unsigned int val;
+	int ret;
+
+	for (;;) {
+		ret = regmap_read(map, addr, &val);
+		if (ret)
+			break;
+		if ((val & cond_mask) == cond_value)
+			break;
+		if (timeout_us && ktime_compare(ktime_get(), timeout) > 0) {
+			ret = regmap_read(map, addr, &val);
+			break;
+		}
+		if (sleep_us)
+			usleep_range((sleep_us >> 2) + 1, sleep_us);
+	}
+	return ret ?: (((val & cond_mask) == cond_value) ? 0 : -ETIMEDOUT);
+}
+
+static int tc_aux_wait_busy(struct tc_data *tc, unsigned int timeout_ms)
+{
+	return tc_poll_timeout(tc->regmap, DP0_AUXSTATUS, AUX_BUSY, 0,
+			       1000, 1000 * timeout_ms);
+}
+
+static int tc_aux_get_status(struct tc_data *tc, u8 *reply)
+{
+	int ret;
+	u32 value;
+
+	ret = regmap_read(tc->regmap, DP0_AUXSTATUS, &value);
+	if (ret < 0)
+		return ret;
+	if (value & AUX_BUSY) {
+		if (value & AUX_TIMEOUT) {
+			dev_err(tc->dev, "i2c access timeout!\n");
+			return -ETIMEDOUT;
+		}
+		return -EBUSY;
+	}
+
+	*reply = (value & AUX_STATUS_MASK) >> AUX_STATUS_SHIFT;
+	return 0;
+}
+
+static ssize_t tc_aux_transfer(struct drm_dp_aux *aux,
+			       struct drm_dp_aux_msg *msg)
+{
+	struct tc_data *tc = aux_to_tc(aux);
+	size_t size = min_t(size_t, DP_AUX_MAX_PAYLOAD_BYTES - 1, msg->size);
+	u8 request = msg->request & ~DP_AUX_I2C_MOT;
+	u8 *buf = msg->buffer;
+	u32 tmp = 0;
+	int i = 0;
+	int ret;
+
+	if (size == 0)
+		return 0;
+
+	ret = tc_aux_wait_busy(tc, 100);
+	if (ret)
+		goto err;
+
+	if (request == DP_AUX_I2C_WRITE || request == DP_AUX_NATIVE_WRITE) {
+		/* Store data */
+		while (i < size) {
+			if (request == DP_AUX_NATIVE_WRITE)
+				tmp = tmp | (buf[i] << (8 * (i & 0x3)));
+			else
+				tmp = (tmp << 8) | buf[i];
+			i++;
+			if (((i % 4) == 0) || (i == size)) {
+				tc_write(DP0_AUXWDATA((i - 1) >> 2), tmp);
+				tmp = 0;
+			}
+		}
+	} else if (request != DP_AUX_I2C_READ &&
+		   request != DP_AUX_NATIVE_READ) {
+		return -EINVAL;
+	}
+
+	/* Store address */
+	tc_write(DP0_AUXADDR, msg->address);
+	/* Start transfer */
+	tc_write(DP0_AUXCFG0, ((size - 1) << 8) | request);
+
+	ret = tc_aux_wait_busy(tc, 100);
+	if (ret)
+		goto err;
+
+	ret = tc_aux_get_status(tc, &msg->reply);
+	if (ret)
+		goto err;
+
+	if (request == DP_AUX_I2C_READ || request == DP_AUX_NATIVE_READ) {
+		/* Read data */
+		while (i < size) {
+			if ((i % 4) == 0)
+				tc_read(DP0_AUXRDATA(i >> 2), &tmp);
+			buf[i] = tmp & 0xff;
+			tmp = tmp >> 8;
+			i++;
+		}
+	}
+
+	return size;
+err:
+	return ret;
+}
+
+static const char * const training_pattern1_errors[] = {
+	"No errors",
+	"Aux write error",
+	"Aux read error",
+	"Max voltage reached error",
+	"Loop counter expired error",
+	"res", "res", "res"
+};
+
+static const char * const training_pattern2_errors[] = {
+	"No errors",
+	"Aux write error",
+	"Aux read error",
+	"Clock recovery failed error",
+	"Loop counter expired error",
+	"res", "res", "res"
+};
+
+static u32 tc_srcctrl(struct tc_data *tc)
+{
+	/*
+	 * No training pattern, skew lane 1 data by two LSCLK cycles with
+	 * respect to lane 0 data, AutoCorrect Mode = 0
+	 */
+	u32 reg = DP0_SRCCTRL_NOTP | DP0_SRCCTRL_LANESKEW;
+
+	if (tc->link.scrambler_dis)
+		reg |= DP0_SRCCTRL_SCRMBLDIS;	/* Scrambler Disabled */
+	if (tc->link.coding8b10b)
+		/* Enable 8/10B Encoder (TxData[19:16] not used) */
+		reg |= DP0_SRCCTRL_EN810B;
+	if (tc->link.spread)
+		reg |= DP0_SRCCTRL_SSCG;	/* Spread Spectrum Enable */
+	if (tc->link.base.num_lanes == 2)
+		reg |= DP0_SRCCTRL_LANES_2;	/* Two Main Channel Lanes */
+	if (tc->link.base.rate != 162000)
+		reg |= DP0_SRCCTRL_BW27;	/* 2.7 Gbps link */
+	return reg;
+}
+
+static void tc_wait_pll_lock(struct tc_data *tc)
+{
+	/* Wait for PLL to lock: up to 2.09 ms, depending on refclk */
+	usleep_range(3000, 6000);
+}
+
+static int tc_pxl_pll_en(struct tc_data *tc, u32 refclk, u32 pixelclock)
+{
+	int ret;
+	int i_pre, best_pre = 1;
+	int i_post, best_post = 1;
+	int div, best_div = 1;
+	int mul, best_mul = 1;
+	int delta, best_delta;
+	int ext_div[] = {1, 2, 3, 5, 7};
+	int best_pixelclock = 0;
+	int vco_hi = 0;
+
+	dev_dbg(tc->dev, "PLL: requested %d pixelclock, ref %d\n", pixelclock,
+		refclk);
+	best_delta = pixelclock;
+	/* Loop over all possible ext_divs, skipping invalid configurations */
+	for (i_pre = 0; i_pre < ARRAY_SIZE(ext_div); i_pre++) {
+		/*
+		 * refclk / ext_pre_div should be in the 1 to 200 MHz range.
+		 * We don't allow any refclk > 200 MHz, only check lower bounds.
+		 */
+		if (refclk / ext_div[i_pre] < 1000000)
+			continue;
+		for (i_post = 0; i_post < ARRAY_SIZE(ext_div); i_post++) {
+			for (div = 1; div <= 16; div++) {
+				u32 clk;
+				u64 tmp;
+
+				tmp = pixelclock * ext_div[i_pre] *
+				      ext_div[i_post] * div;
+				do_div(tmp, refclk);
+				mul = tmp;
+
+				/* Check limits */
+				if ((mul < 1) || (mul > 128))
+					continue;
+
+				clk = (refclk / ext_div[i_pre] / div) * mul;
+				/*
+				 * refclk * mul / (ext_pre_div * pre_div)
+				 * should be in the 150 to 650 MHz range
+				 */
+				if ((clk > 650000000) || (clk < 150000000))
+					continue;
+
+				clk = clk / ext_div[i_post];
+				delta = clk - pixelclock;
+
+				if (abs(delta) < abs(best_delta)) {
+					best_pre = i_pre;
+					best_post = i_post;
+					best_div = div;
+					best_mul = mul;
+					best_delta = delta;
+					best_pixelclock = clk;
+				}
+			}
+		}
+	}
+	if (best_pixelclock == 0) {
+		dev_err(tc->dev, "Failed to calc clock for %d pixelclock\n",
+			pixelclock);
+		return -EINVAL;
+	}
+
+	dev_dbg(tc->dev, "PLL: got %d, delta %d\n", best_pixelclock,
+		best_delta);
+	dev_dbg(tc->dev, "PLL: %d / %d / %d * %d / %d\n", refclk,
+		ext_div[best_pre], best_div, best_mul, ext_div[best_post]);
+
+	/* if VCO >= 300 MHz */
+	if (refclk / ext_div[best_pre] / best_div * best_mul >= 300000000)
+		vco_hi = 1;
+	/* see DS */
+	if (best_div == 16)
+		best_div = 0;
+	if (best_mul == 128)
+		best_mul = 0;
+
+	/* Power up PLL and switch to bypass */
+	tc_write(PXL_PLLCTRL, PLLBYP | PLLEN);
+
+	tc_write(PXL_PLLPARAM,
+		 (vco_hi << 24) |		/* For PLL VCO >= 300 MHz = 1 */
+		 (ext_div[best_pre] << 20) |	/* External Pre-divider */
+		 (ext_div[best_post] << 16) |	/* External Post-divider */
+		 IN_SEL_REFCLK |		/* Use RefClk as PLL input */
+		 (best_div << 8) |		/* Divider for PLL RefClk */
+		 (best_mul << 0));		/* Multiplier for PLL */
+
+	/* Force PLL parameter update and disable bypass */
+	tc_write(PXL_PLLCTRL, PLLUPDATE | PLLEN);
+
+	tc_wait_pll_lock(tc);
+
+	return 0;
+err:
+	return ret;
+}
+
+static int tc_pxl_pll_dis(struct tc_data *tc)
+{
+	/* Enable PLL bypass, power down PLL */
+	return regmap_write(tc->regmap, PXL_PLLCTRL, PLLBYP);
+}
+
+static int tc_stream_clock_calc(struct tc_data *tc)
+{
+	int ret;
+	/*
+	 * If the Stream clock and Link Symbol clock are
+	 * asynchronous with each other, the value of M changes over
+	 * time. This way of generating link clock and stream
+	 * clock is called Asynchronous Clock mode. The value M
+	 * must change while the value N stays constant. The
+	 * value of N in this Asynchronous Clock mode must be set
+	 * to 2^15 or 32,768.
+	 *
+	 * LSCLK = 1/10 of high speed link clock
+	 *
+	 * f_STRMCLK = M/N * f_LSCLK
+	 * M/N = f_STRMCLK / f_LSCLK
+	 *
+	 */
+	tc_write(DP0_VIDMNGEN1, 32768);
+
+	return 0;
+err:
+	return ret;
+}
+
+static int tc_aux_link_setup(struct tc_data *tc)
+{
+	unsigned long rate;
+	u32 value;
+	int ret;
+	u32 dp_phy_ctrl;
+
+	rate = clk_get_rate(tc->refclk);
+	switch (rate) {
+	case 38400000:
+		value = REF_FREQ_38M4;
+		break;
+	case 26000000:
+		value = REF_FREQ_26M;
+		break;
+	case 19200000:
+		value = REF_FREQ_19M2;
+		break;
+	case 13000000:
+		value = REF_FREQ_13M;
+		break;
+	default:
+		dev_err(tc->dev, "Invalid refclk rate: %lu Hz\n", rate);
+		return -EINVAL;
+	}
+
+	/* Setup DP-PHY / PLL */
+	value |= SYSCLK_SEL_LSCLK | LSCLK_DIV_2;
+	tc_write(SYS_PLLPARAM, value);
+
+	dp_phy_ctrl = BGREN | PWR_SW_EN | PHY_A0_EN;
+	if (tc->link.base.num_lanes == 2)
+		dp_phy_ctrl |= PHY_2LANE;
+	tc_write(DP_PHY_CTRL, dp_phy_ctrl);
+
+	/*
+	 * Initially PLLs are in bypass. Force PLL parameter update,
+	 * disable PLL bypass, enable PLL
+	 */
+	tc_write(DP0_PLLCTRL, PLLUPDATE | PLLEN);
+	tc_wait_pll_lock(tc);
+
+	tc_write(DP1_PLLCTRL, PLLUPDATE | PLLEN);
+	tc_wait_pll_lock(tc);
+
+	ret = tc_poll_timeout(tc->regmap, DP_PHY_CTRL, PHY_RDY, PHY_RDY, 1,
+			      1000);
+	if (ret == -ETIMEDOUT) {
+		dev_err(tc->dev, "Timeout waiting for PHY to become ready");
+		return ret;
+	} else if (ret)
+		goto err;
+
+	/* Setup AUX link */
+	tc_write(DP0_AUXCFG1, AUX_RX_FILTER_EN |
+		 (0x06 << 8) |	/* Aux Bit Period Calculator Threshold */
+		 (0x3f << 0));	/* Aux Response Timeout Timer */
+
+	return 0;
+err:
+	dev_err(tc->dev, "tc_aux_link_setup failed: %d\n", ret);
+	return ret;
+}
+
+static int tc_get_display_props(struct tc_data *tc)
+{
+	int ret;
+	/* temp buffer */
+	u8 tmp[8];
+
+	/* Read DP Rx Link Capability */
+	ret = drm_dp_link_probe(&tc->aux, &tc->link.base);
+	if (ret < 0)
+		goto err_dpcd_read;
+	if (tc->link.base.rate != 162000 && tc->link.base.rate != 270000) {
+		dev_dbg(tc->dev, "Falling to 2.7 Gbps rate\n");
+		tc->link.base.rate = 270000;
+	}
+
+	if (tc->link.base.num_lanes > 2) {
+		dev_dbg(tc->dev, "Falling to 2 lanes\n");
+		tc->link.base.num_lanes = 2;
+	}
+
+	ret = drm_dp_dpcd_readb(&tc->aux, DP_MAX_DOWNSPREAD, tmp);
+	if (ret < 0)
+		goto err_dpcd_read;
+	tc->link.spread = tmp[0] & BIT(0); /* 0.5% down spread */
+
+	ret = drm_dp_dpcd_readb(&tc->aux, DP_MAIN_LINK_CHANNEL_CODING, tmp);
+	if (ret < 0)
+		goto err_dpcd_read;
+	tc->link.coding8b10b = tmp[0] & BIT(0);
+	tc->link.scrambler_dis = 0;
+	/* read assr */
+	ret = drm_dp_dpcd_readb(&tc->aux, DP_EDP_CONFIGURATION_SET, tmp);
+	if (ret < 0)
+		goto err_dpcd_read;
+	tc->link.assr = tmp[0] & DP_ALTERNATE_SCRAMBLER_RESET_ENABLE;
+
+	dev_dbg(tc->dev, "DPCD rev: %d.%d, rate: %s, lanes: %d, framing: %s\n",
+		tc->link.base.revision >> 4, tc->link.base.revision & 0x0f,
+		(tc->link.base.rate == 162000) ? "1.62Gbps" : "2.7Gbps",
+		tc->link.base.num_lanes,
+		(tc->link.base.capabilities & DP_LINK_CAP_ENHANCED_FRAMING) ?
+		"enhanced" : "non-enhanced");
+	dev_dbg(tc->dev, "ANSI 8B/10B: %d\n", tc->link.coding8b10b);
+	dev_dbg(tc->dev, "Display ASSR: %d, TC358767 ASSR: %d\n",
+		tc->link.assr, tc->assr);
+
+	return 0;
+
+err_dpcd_read:
+	dev_err(tc->dev, "failed to read DPCD: %d\n", ret);
+	return ret;
+}
+
+static int tc_set_video_mode(struct tc_data *tc, struct drm_display_mode *mode)
+{
+	int ret;
+	int vid_sync_dly;
+	int max_tu_symbol;
+
+	int left_margin = mode->htotal - mode->hsync_end;
+	int right_margin = mode->hsync_start - mode->hdisplay;
+	int hsync_len = mode->hsync_end - mode->hsync_start;
+	int upper_margin = mode->vtotal - mode->vsync_end;
+	int lower_margin = mode->vsync_start - mode->vdisplay;
+	int vsync_len = mode->vsync_end - mode->vsync_start;
+
+	/*
+	 * Recommended maximum number of symbols transferred in a transfer unit:
+	 * DIV_ROUND_UP((input active video bandwidth in bytes) * tu_size,
+	 *              (output active video bandwidth in bytes))
+	 * Must be less than tu_size.
+	 */
+	max_tu_symbol = TU_SIZE_RECOMMENDED - 1;
+
+	dev_dbg(tc->dev, "set mode %dx%d\n",
+		mode->hdisplay, mode->vdisplay);
+	dev_dbg(tc->dev, "H margin %d,%d sync %d\n",
+		left_margin, right_margin, hsync_len);
+	dev_dbg(tc->dev, "V margin %d,%d sync %d\n",
+		upper_margin, lower_margin, vsync_len);
+	dev_dbg(tc->dev, "total: %dx%d\n", mode->htotal, mode->vtotal);
+
+
+	/*
+	 * LCD Ctl Frame Size
+	 * datasheet is not clear of vsdelay in case of DPI
+	 * assume we do not need any delay when DPI is a source of
+	 * sync signals
+	 */
+	tc_write(VPCTRL0, (0 << 20) /* VSDELAY */ |
+		 OPXLFMT_RGB888 | FRMSYNC_DISABLED | MSF_DISABLED);
+	tc_write(HTIM01, (ALIGN(left_margin, 2) << 16) | /* H back porch */
+			 (ALIGN(hsync_len, 2) << 0));	 /* Hsync */
+	tc_write(HTIM02, (ALIGN(right_margin, 2) << 16) |  /* H front porch */
+			 (ALIGN(mode->hdisplay, 2) << 0)); /* width */
+	tc_write(VTIM01, (upper_margin << 16) |		/* V back porch */
+			 (vsync_len << 0));		/* Vsync */
+	tc_write(VTIM02, (lower_margin << 16) |		/* V front porch */
+			 (mode->vdisplay << 0));	/* height */
+	tc_write(VFUEN0, VFUEN);		/* update settings */
+
+	/* Test pattern settings */
+	tc_write(TSTCTL,
+		 (120 << 24) |	/* Red Color component value */
+		 (20 << 16) |	/* Green Color component value */
+		 (99 << 8) |	/* Blue Color component value */
+		 (1 << 4) |	/* Enable I2C Filter */
+		 (2 << 0) |	/* Color bar Mode */
+		 0);
+
+	/* DP Main Stream Attributes */
+	vid_sync_dly = hsync_len + left_margin + mode->hdisplay;
+	tc_write(DP0_VIDSYNCDELAY,
+		 (max_tu_symbol << 16) |	/* thresh_dly */
+		 (vid_sync_dly << 0));
+
+	tc_write(DP0_TOTALVAL, (mode->vtotal << 16) | (mode->htotal));
+
+	tc_write(DP0_STARTVAL,
+		 ((upper_margin + vsync_len) << 16) |
+		 ((left_margin + hsync_len) << 0));
+
+	tc_write(DP0_ACTIVEVAL, (mode->vdisplay << 16) | (mode->hdisplay));
+
+	tc_write(DP0_SYNCVAL, (vsync_len << 16) | (hsync_len << 0) |
+		 ((mode->flags & DRM_MODE_FLAG_NHSYNC) ? SYNCVAL_HS_POL_ACTIVE_LOW : 0) |
+		 ((mode->flags & DRM_MODE_FLAG_NVSYNC) ? SYNCVAL_VS_POL_ACTIVE_LOW : 0));
+
+	tc_write(DPIPXLFMT, VS_POL_ACTIVE_LOW | HS_POL_ACTIVE_LOW |
+		 DE_POL_ACTIVE_HIGH | SUB_CFG_TYPE_CONFIG1 | DPI_BPP_RGB888);
+
+	tc_write(DP0_MISC, (max_tu_symbol << 23) | (TU_SIZE_RECOMMENDED << 16) |
+			   BPC_8);
+
+	return 0;
+err:
+	return ret;
+}
+
+static int tc_link_training(struct tc_data *tc, int pattern)
+{
+	const char * const *errors;
+	u32 srcctrl = tc_srcctrl(tc) | DP0_SRCCTRL_SCRMBLDIS |
+		      DP0_SRCCTRL_AUTOCORRECT;
+	int timeout;
+	int retry;
+	u32 value;
+	int ret;
+
+	if (pattern == DP_TRAINING_PATTERN_1) {
+		srcctrl |= DP0_SRCCTRL_TP1;
+		errors = training_pattern1_errors;
+	} else {
+		srcctrl |= DP0_SRCCTRL_TP2;
+		errors = training_pattern2_errors;
+	}
+
+	/* Set DPCD 0x102 for Training Part 1 or 2 */
+	tc_write(DP0_SNKLTCTRL, DP_LINK_SCRAMBLING_DISABLE | pattern);
+
+	tc_write(DP0_LTLOOPCTRL,
+		 (0x0f << 28) |	/* Defer Iteration Count */
+		 (0x0f << 24) |	/* Loop Iteration Count */
+		 (0x0d << 0));	/* Loop Timer Delay */
+
+	retry = 5;
+	do {
+		/* Set DP0 Training Pattern */
+		tc_write(DP0_SRCCTRL, srcctrl);
+
+		/* Enable DP0 to start Link Training */
+		tc_write(DP0CTL, DP_EN);
+
+		/* wait */
+		timeout = 1000;
+		do {
+			tc_read(DP0_LTSTAT, &value);
+			udelay(1);
+		} while ((!(value & LT_LOOPDONE)) && (--timeout));
+		if (timeout == 0) {
+			dev_err(tc->dev, "Link training timeout!\n");
+		} else {
+			int pattern = (value >> 11) & 0x3;
+			int error = (value >> 8) & 0x7;
+
+			dev_dbg(tc->dev,
+				"Link training phase %d done after %d uS: %s\n",
+				pattern, 1000 - timeout, errors[error]);
+			if (pattern == DP_TRAINING_PATTERN_1 && error == 0)
+				break;
+			if (pattern == DP_TRAINING_PATTERN_2) {
+				value &= LT_CHANNEL1_EQ_BITS |
+					 LT_INTERLANE_ALIGN_DONE |
+					 LT_CHANNEL0_EQ_BITS;
+				/* in case of two lanes */
+				if ((tc->link.base.num_lanes == 2) &&
+				    (value == (LT_CHANNEL1_EQ_BITS |
+					       LT_INTERLANE_ALIGN_DONE |
+					       LT_CHANNEL0_EQ_BITS)))
+					break;
+				/* in case of one line */
+				if ((tc->link.base.num_lanes == 1) &&
+				    (value == (LT_INTERLANE_ALIGN_DONE |
+					       LT_CHANNEL0_EQ_BITS)))
+					break;
+			}
+		}
+		/* restart */
+		tc_write(DP0CTL, 0);
+		usleep_range(10, 20);
+	} while (--retry);
+	if (retry == 0) {
+		dev_err(tc->dev, "Failed to finish training phase %d\n",
+			pattern);
+	}
+
+	return 0;
+err:
+	return ret;
+}
+
+static int tc_main_link_setup(struct tc_data *tc)
+{
+	struct drm_dp_aux *aux = &tc->aux;
+	struct device *dev = tc->dev;
+	unsigned int rate;
+	u32 dp_phy_ctrl;
+	int timeout;
+	u32 value;
+	int ret;
+	u8 tmp[8];
+
+	/* display mode should be set at this point */
+	if (!tc->mode)
+		return -EINVAL;
+
+	tc_write(DP0_SRCCTRL, tc_srcctrl(tc));
+	/* SSCG and BW27 on DP1 must be set to the same as on DP0 */
+	tc_write(DP1_SRCCTRL,
+		 (tc->link.spread ? DP0_SRCCTRL_SSCG : 0) |
+		 ((tc->link.base.rate != 162000) ? DP0_SRCCTRL_BW27 : 0));
+
+	rate = clk_get_rate(tc->refclk);
+	switch (rate) {
+	case 38400000:
+		value = REF_FREQ_38M4;
+		break;
+	case 26000000:
+		value = REF_FREQ_26M;
+		break;
+	case 19200000:
+		value = REF_FREQ_19M2;
+		break;
+	case 13000000:
+		value = REF_FREQ_13M;
+		break;
+	default:
+		return -EINVAL;
+	}
+	value |= SYSCLK_SEL_LSCLK | LSCLK_DIV_2;
+	tc_write(SYS_PLLPARAM, value);
+
+	/* Setup Main Link */
+	dp_phy_ctrl = BGREN | PWR_SW_EN | PHY_A0_EN | PHY_M0_EN;
+	if (tc->link.base.num_lanes == 2)
+		dp_phy_ctrl |= PHY_2LANE;
+	tc_write(DP_PHY_CTRL, dp_phy_ctrl);
+	msleep(100);
+
+	/* PLL setup */
+	tc_write(DP0_PLLCTRL, PLLUPDATE | PLLEN);
+	tc_wait_pll_lock(tc);
+
+	tc_write(DP1_PLLCTRL, PLLUPDATE | PLLEN);
+	tc_wait_pll_lock(tc);
+
+	/* PXL PLL setup */
+	if (tc_test_pattern) {
+		ret = tc_pxl_pll_en(tc, clk_get_rate(tc->refclk),
+				    1000 * tc->mode->clock);
+		if (ret)
+			goto err;
+	}
+
+	/* Reset/Enable Main Links */
+	dp_phy_ctrl |= DP_PHY_RST | PHY_M1_RST | PHY_M0_RST;
+	tc_write(DP_PHY_CTRL, dp_phy_ctrl);
+	usleep_range(100, 200);
+	dp_phy_ctrl &= ~(DP_PHY_RST | PHY_M1_RST | PHY_M0_RST);
+	tc_write(DP_PHY_CTRL, dp_phy_ctrl);
+
+	timeout = 1000;
+	do {
+		tc_read(DP_PHY_CTRL, &value);
+		udelay(1);
+	} while ((!(value & PHY_RDY)) && (--timeout));
+
+	if (timeout == 0) {
+		dev_err(dev, "timeout waiting for phy become ready");
+		return -ETIMEDOUT;
+	}
+
+	/* Set misc: 8 bits per color */
+	ret = regmap_update_bits(tc->regmap, DP0_MISC, BPC_8, BPC_8);
+	if (ret)
+		goto err;
+
+	/*
+	 * ASSR mode
+	 * on TC358767 side ASSR configured through strap pin
+	 * seems there is no way to change this setting from SW
+	 *
+	 * check is tc configured for same mode
+	 */
+	if (tc->assr != tc->link.assr) {
+		dev_dbg(dev, "Trying to set display to ASSR: %d\n",
+			tc->assr);
+		/* try to set ASSR on display side */
+		tmp[0] = tc->assr;
+		ret = drm_dp_dpcd_writeb(aux, DP_EDP_CONFIGURATION_SET, tmp[0]);
+		if (ret < 0)
+			goto err_dpcd_read;
+		/* read back */
+		ret = drm_dp_dpcd_readb(aux, DP_EDP_CONFIGURATION_SET, tmp);
+		if (ret < 0)
+			goto err_dpcd_read;
+
+		if (tmp[0] != tc->assr) {
+			dev_dbg(dev, "Failed to switch display ASSR to %d, falling back to unscrambled mode\n",
+				 tc->assr);
+			/* trying with disabled scrambler */
+			tc->link.scrambler_dis = 1;
+		}
+	}
+
+	/* Setup Link & DPRx Config for Training */
+	ret = drm_dp_link_configure(aux, &tc->link.base);
+	if (ret < 0)
+		goto err_dpcd_write;
+
+	/* DOWNSPREAD_CTRL */
+	tmp[0] = tc->link.spread ? DP_SPREAD_AMP_0_5 : 0x00;
+	/* MAIN_LINK_CHANNEL_CODING_SET */
+	tmp[1] =  tc->link.coding8b10b ? DP_SET_ANSI_8B10B : 0x00;
+	ret = drm_dp_dpcd_write(aux, DP_DOWNSPREAD_CTRL, tmp, 2);
+	if (ret < 0)
+		goto err_dpcd_write;
+
+	ret = tc_link_training(tc, DP_TRAINING_PATTERN_1);
+	if (ret)
+		goto err;
+
+	ret = tc_link_training(tc, DP_TRAINING_PATTERN_2);
+	if (ret)
+		goto err;
+
+	/* Clear DPCD 0x102 */
+	/* Note: Can Not use DP0_SNKLTCTRL (0x06E4) short cut */
+	tmp[0] = tc->link.scrambler_dis ? DP_LINK_SCRAMBLING_DISABLE : 0x00;
+	ret = drm_dp_dpcd_writeb(aux, DP_TRAINING_PATTERN_SET, tmp[0]);
+	if (ret < 0)
+		goto err_dpcd_write;
+
+	/* Clear Training Pattern, set AutoCorrect Mode = 1 */
+	tc_write(DP0_SRCCTRL, tc_srcctrl(tc) | DP0_SRCCTRL_AUTOCORRECT);
+
+	/* Wait */
+	timeout = 100;
+	do {
+		udelay(1);
+		/* Read DPCD 0x202-0x207 */
+		ret = drm_dp_dpcd_read_link_status(aux, tmp + 2);
+		if (ret < 0)
+			goto err_dpcd_read;
+	} while ((--timeout) &&
+		 !(drm_dp_channel_eq_ok(tmp + 2,  tc->link.base.num_lanes)));
+
+	if (timeout == 0) {
+		/* Read DPCD 0x200-0x201 */
+		ret = drm_dp_dpcd_read(aux, DP_SINK_COUNT, tmp, 2);
+		if (ret < 0)
+			goto err_dpcd_read;
+		dev_err(dev, "channel(s) EQ not ok\n");
+		dev_info(dev, "0x0200 SINK_COUNT: 0x%02x\n", tmp[0]);
+		dev_info(dev, "0x0201 DEVICE_SERVICE_IRQ_VECTOR: 0x%02x\n",
+			 tmp[1]);
+		dev_info(dev, "0x0202 LANE0_1_STATUS: 0x%02x\n", tmp[2]);
+		dev_info(dev, "0x0204 LANE_ALIGN_STATUS_UPDATED: 0x%02x\n",
+			 tmp[4]);
+		dev_info(dev, "0x0205 SINK_STATUS: 0x%02x\n", tmp[5]);
+		dev_info(dev, "0x0206 ADJUST_REQUEST_LANE0_1: 0x%02x\n",
+			 tmp[6]);
+
+		return -EAGAIN;
+	}
+
+	ret = tc_set_video_mode(tc, tc->mode);
+	if (ret)
+		goto err;
+
+	/* Set M/N */
+	ret = tc_stream_clock_calc(tc);
+	if (ret)
+		goto err;
+
+	return 0;
+err_dpcd_read:
+	dev_err(tc->dev, "Failed to read DPCD: %d\n", ret);
+	return ret;
+err_dpcd_write:
+	dev_err(tc->dev, "Failed to write DPCD: %d\n", ret);
+err:
+	return ret;
+}
+
+static int tc_main_link_stream(struct tc_data *tc, int state)
+{
+	int ret;
+	u32 value;
+
+	dev_dbg(tc->dev, "stream: %d\n", state);
+
+	if (state) {
+		value = VID_MN_GEN | DP_EN;
+		if (tc->link.base.capabilities & DP_LINK_CAP_ENHANCED_FRAMING)
+			value |= EF_EN;
+		tc_write(DP0CTL, value);
+		/*
+		 * VID_EN assertion should be delayed by at least N * LSCLK
+		 * cycles from the time VID_MN_GEN is enabled in order to
+		 * generate stable values for VID_M. LSCLK is 270 MHz or
+		 * 162 MHz, VID_N is set to 32768 in  tc_stream_clock_calc(),
+		 * so a delay of at least 203 us should suffice.
+		 */
+		usleep_range(500, 1000);
+		value |= VID_EN;
+		tc_write(DP0CTL, value);
+		/* Set input interface */
+		value = DP0_AUDSRC_NO_INPUT;
+		if (tc_test_pattern)
+			value |= DP0_VIDSRC_COLOR_BAR;
+		else
+			value |= DP0_VIDSRC_DPI_RX;
+		tc_write(SYSCTRL, value);
+	} else {
+		tc_write(DP0CTL, 0);
+	}
+
+	return 0;
+err:
+	return ret;
+}
+
+static void tc_bridge_pre_enable(struct drm_bridge *bridge)
+{
+	struct tc_data *tc = bridge_to_tc(bridge);
+
+	drm_panel_prepare(tc->panel);
+}
+
+static void tc_bridge_enable(struct drm_bridge *bridge)
+{
+	struct tc_data *tc = bridge_to_tc(bridge);
+	int ret;
+
+	ret = tc_main_link_setup(tc);
+	if (ret < 0) {
+		dev_err(tc->dev, "main link setup error: %d\n", ret);
+		return;
+	}
+
+	ret = tc_main_link_stream(tc, 1);
+	if (ret < 0) {
+		dev_err(tc->dev, "main link stream start error: %d\n", ret);
+		return;
+	}
+
+	drm_panel_enable(tc->panel);
+}
+
+static void tc_bridge_disable(struct drm_bridge *bridge)
+{
+	struct tc_data *tc = bridge_to_tc(bridge);
+	int ret;
+
+	drm_panel_disable(tc->panel);
+
+	ret = tc_main_link_stream(tc, 0);
+	if (ret < 0)
+		dev_err(tc->dev, "main link stream stop error: %d\n", ret);
+}
+
+static void tc_bridge_post_disable(struct drm_bridge *bridge)
+{
+	struct tc_data *tc = bridge_to_tc(bridge);
+
+	drm_panel_unprepare(tc->panel);
+}
+
+static bool tc_bridge_mode_fixup(struct drm_bridge *bridge,
+				 const struct drm_display_mode *mode,
+				 struct drm_display_mode *adj)
+{
+	/* Fixup sync polarities, both hsync and vsync are active low */
+	adj->flags = mode->flags;
+	adj->flags |= (DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC);
+	adj->flags &= ~(DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC);
+
+	return true;
+}
+
+static enum drm_mode_status tc_connector_mode_valid(struct drm_connector *connector,
+				   struct drm_display_mode *mode)
+{
+	struct tc_data *tc = connector_to_tc(connector);
+	u32 req, avail;
+	u32 bits_per_pixel = 24;
+
+	/* DPI interface clock limitation: upto 154 MHz */
+	if (mode->clock > 154000)
+		return MODE_CLOCK_HIGH;
+
+	req = mode->clock * bits_per_pixel / 8;
+	avail = tc->link.base.num_lanes * tc->link.base.rate;
+
+	if (req > avail)
+		return MODE_BAD;
+
+	return MODE_OK;
+}
+
+static void tc_bridge_mode_set(struct drm_bridge *bridge,
+			       struct drm_display_mode *mode,
+			       struct drm_display_mode *adj)
+{
+	struct tc_data *tc = bridge_to_tc(bridge);
+
+	tc->mode = mode;
+}
+
+static int tc_connector_get_modes(struct drm_connector *connector)
+{
+	struct tc_data *tc = connector_to_tc(connector);
+	struct edid *edid;
+	unsigned int count;
+	int ret;
+
+	ret = tc_get_display_props(tc);
+	if (ret < 0) {
+		dev_err(tc->dev, "failed to read display props: %d\n", ret);
+		return 0;
+	}
+
+	if (tc->panel && tc->panel->funcs && tc->panel->funcs->get_modes) {
+		count = tc->panel->funcs->get_modes(tc->panel);
+		if (count > 0)
+			return count;
+	}
+
+	edid = drm_get_edid(connector, &tc->aux.ddc);
+
+	kfree(tc->edid);
+	tc->edid = edid;
+	if (!edid)
+		return 0;
+
+	drm_connector_update_edid_property(connector, edid);
+	count = drm_add_edid_modes(connector, edid);
+
+	return count;
+}
+
+static void tc_connector_set_polling(struct tc_data *tc,
+				     struct drm_connector *connector)
+{
+	/* TODO: add support for HPD */
+	connector->polled = DRM_CONNECTOR_POLL_CONNECT |
+			    DRM_CONNECTOR_POLL_DISCONNECT;
+}
+
+static struct drm_encoder *
+tc_connector_best_encoder(struct drm_connector *connector)
+{
+	struct tc_data *tc = connector_to_tc(connector);
+
+	return tc->bridge.encoder;
+}
+
+static const struct drm_connector_helper_funcs tc_connector_helper_funcs = {
+	.get_modes = tc_connector_get_modes,
+	.mode_valid = tc_connector_mode_valid,
+	.best_encoder = tc_connector_best_encoder,
+};
+
+static const struct drm_connector_funcs tc_connector_funcs = {
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.destroy = drm_connector_cleanup,
+	.reset = drm_atomic_helper_connector_reset,
+	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static int tc_bridge_attach(struct drm_bridge *bridge)
+{
+	u32 bus_format = MEDIA_BUS_FMT_RGB888_1X24;
+	struct tc_data *tc = bridge_to_tc(bridge);
+	struct drm_device *drm = bridge->dev;
+	int ret;
+
+	/* Create eDP connector */
+	drm_connector_helper_add(&tc->connector, &tc_connector_helper_funcs);
+	ret = drm_connector_init(drm, &tc->connector, &tc_connector_funcs,
+				 DRM_MODE_CONNECTOR_eDP);
+	if (ret)
+		return ret;
+
+	if (tc->panel)
+		drm_panel_attach(tc->panel, &tc->connector);
+
+	drm_display_info_set_bus_formats(&tc->connector.display_info,
+					 &bus_format, 1);
+	tc->connector.display_info.bus_flags =
+		DRM_BUS_FLAG_DE_HIGH |
+		DRM_BUS_FLAG_PIXDATA_NEGEDGE |
+		DRM_BUS_FLAG_SYNC_NEGEDGE;
+	drm_connector_attach_encoder(&tc->connector, tc->bridge.encoder);
+
+	return 0;
+}
+
+static const struct drm_bridge_funcs tc_bridge_funcs = {
+	.attach = tc_bridge_attach,
+	.mode_set = tc_bridge_mode_set,
+	.pre_enable = tc_bridge_pre_enable,
+	.enable = tc_bridge_enable,
+	.disable = tc_bridge_disable,
+	.post_disable = tc_bridge_post_disable,
+	.mode_fixup = tc_bridge_mode_fixup,
+};
+
+static bool tc_readable_reg(struct device *dev, unsigned int reg)
+{
+	return reg != SYSCTRL;
+}
+
+static const struct regmap_range tc_volatile_ranges[] = {
+	regmap_reg_range(DP0_AUXWDATA(0), DP0_AUXSTATUS),
+	regmap_reg_range(DP0_LTSTAT, DP0_SNKLTCHGREQ),
+	regmap_reg_range(DP_PHY_CTRL, DP_PHY_CTRL),
+	regmap_reg_range(DP0_PLLCTRL, PXL_PLLCTRL),
+	regmap_reg_range(VFUEN0, VFUEN0),
+};
+
+static const struct regmap_access_table tc_volatile_table = {
+	.yes_ranges = tc_volatile_ranges,
+	.n_yes_ranges = ARRAY_SIZE(tc_volatile_ranges),
+};
+
+static bool tc_writeable_reg(struct device *dev, unsigned int reg)
+{
+	return (reg != TC_IDREG) &&
+	       (reg != DP0_LTSTAT) &&
+	       (reg != DP0_SNKLTCHGREQ);
+}
+
+static const struct regmap_config tc_regmap_config = {
+	.name = "tc358767",
+	.reg_bits = 16,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = PLL_DBG,
+	.cache_type = REGCACHE_RBTREE,
+	.readable_reg = tc_readable_reg,
+	.volatile_table = &tc_volatile_table,
+	.writeable_reg = tc_writeable_reg,
+	.reg_format_endian = REGMAP_ENDIAN_BIG,
+	.val_format_endian = REGMAP_ENDIAN_LITTLE,
+};
+
+static int tc_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct tc_data *tc;
+	int ret;
+
+	tc = devm_kzalloc(dev, sizeof(*tc), GFP_KERNEL);
+	if (!tc)
+		return -ENOMEM;
+
+	tc->dev = dev;
+
+	/* port@2 is the output port */
+	ret = drm_of_find_panel_or_bridge(dev->of_node, 2, 0, &tc->panel, NULL);
+	if (ret && ret != -ENODEV)
+		return ret;
+
+	/* Shut down GPIO is optional */
+	tc->sd_gpio = devm_gpiod_get_optional(dev, "shutdown", GPIOD_OUT_HIGH);
+	if (IS_ERR(tc->sd_gpio))
+		return PTR_ERR(tc->sd_gpio);
+
+	if (tc->sd_gpio) {
+		gpiod_set_value_cansleep(tc->sd_gpio, 0);
+		usleep_range(5000, 10000);
+	}
+
+	/* Reset GPIO is optional */
+	tc->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(tc->reset_gpio))
+		return PTR_ERR(tc->reset_gpio);
+
+	if (tc->reset_gpio) {
+		gpiod_set_value_cansleep(tc->reset_gpio, 1);
+		usleep_range(5000, 10000);
+	}
+
+	tc->refclk = devm_clk_get(dev, "ref");
+	if (IS_ERR(tc->refclk)) {
+		ret = PTR_ERR(tc->refclk);
+		dev_err(dev, "Failed to get refclk: %d\n", ret);
+		return ret;
+	}
+
+	tc->regmap = devm_regmap_init_i2c(client, &tc_regmap_config);
+	if (IS_ERR(tc->regmap)) {
+		ret = PTR_ERR(tc->regmap);
+		dev_err(dev, "Failed to initialize regmap: %d\n", ret);
+		return ret;
+	}
+
+	ret = regmap_read(tc->regmap, TC_IDREG, &tc->rev);
+	if (ret) {
+		dev_err(tc->dev, "can not read device ID: %d\n", ret);
+		return ret;
+	}
+
+	if ((tc->rev != 0x6601) && (tc->rev != 0x6603)) {
+		dev_err(tc->dev, "invalid device ID: 0x%08x\n", tc->rev);
+		return -EINVAL;
+	}
+
+	tc->assr = (tc->rev == 0x6601); /* Enable ASSR for eDP panels */
+
+	ret = tc_aux_link_setup(tc);
+	if (ret)
+		return ret;
+
+	/* Register DP AUX channel */
+	tc->aux.name = "TC358767 AUX i2c adapter";
+	tc->aux.dev = tc->dev;
+	tc->aux.transfer = tc_aux_transfer;
+	ret = drm_dp_aux_register(&tc->aux);
+	if (ret)
+		return ret;
+
+	ret = tc_get_display_props(tc);
+	if (ret)
+		goto err_unregister_aux;
+
+	tc_connector_set_polling(tc, &tc->connector);
+
+	tc->bridge.funcs = &tc_bridge_funcs;
+	tc->bridge.of_node = dev->of_node;
+	drm_bridge_add(&tc->bridge);
+
+	i2c_set_clientdata(client, tc);
+
+	return 0;
+err_unregister_aux:
+	drm_dp_aux_unregister(&tc->aux);
+	return ret;
+}
+
+static int tc_remove(struct i2c_client *client)
+{
+	struct tc_data *tc = i2c_get_clientdata(client);
+
+	drm_bridge_remove(&tc->bridge);
+	drm_dp_aux_unregister(&tc->aux);
+
+	tc_pxl_pll_dis(tc);
+
+	return 0;
+}
+
+static const struct i2c_device_id tc358767_i2c_ids[] = {
+	{ "tc358767", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, tc358767_i2c_ids);
+
+static const struct of_device_id tc358767_of_ids[] = {
+	{ .compatible = "toshiba,tc358767", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, tc358767_of_ids);
+
+static struct i2c_driver tc358767_driver = {
+	.driver = {
+		.name = "tc358767",
+		.of_match_table = tc358767_of_ids,
+	},
+	.id_table = tc358767_i2c_ids,
+	.probe = tc_probe,
+	.remove	= tc_remove,
+};
+module_i2c_driver(tc358767_driver);
+
+MODULE_AUTHOR("Andrey Gusakov <andrey.gusakov@cogentembedded.com>");
+MODULE_DESCRIPTION("tc358767 eDP encoder driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/bridge/thc63lvd1024.c b/drivers/gpu/drm/bridge/thc63lvd1024.c
new file mode 100644
index 000000000..c8b9edd5a
--- /dev/null
+++ b/drivers/gpu/drm/bridge/thc63lvd1024.c
@@ -0,0 +1,206 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * THC63LVD1024 LVDS to parallel data DRM bridge driver.
+ *
+ * Copyright (C) 2018 Jacopo Mondi <jacopo+renesas@jmondi.org>
+ */
+
+#include <drm/drmP.h>
+#include <drm/drm_bridge.h>
+#include <drm/drm_panel.h>
+
+#include <linux/gpio/consumer.h>
+#include <linux/of_graph.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+
+enum thc63_ports {
+	THC63_LVDS_IN0,
+	THC63_LVDS_IN1,
+	THC63_RGB_OUT0,
+	THC63_RGB_OUT1,
+};
+
+struct thc63_dev {
+	struct device *dev;
+
+	struct regulator *vcc;
+
+	struct gpio_desc *pdwn;
+	struct gpio_desc *oe;
+
+	struct drm_bridge bridge;
+	struct drm_bridge *next;
+};
+
+static inline struct thc63_dev *to_thc63(struct drm_bridge *bridge)
+{
+	return container_of(bridge, struct thc63_dev, bridge);
+}
+
+static int thc63_attach(struct drm_bridge *bridge)
+{
+	struct thc63_dev *thc63 = to_thc63(bridge);
+
+	return drm_bridge_attach(bridge->encoder, thc63->next, bridge);
+}
+
+static void thc63_enable(struct drm_bridge *bridge)
+{
+	struct thc63_dev *thc63 = to_thc63(bridge);
+	int ret;
+
+	ret = regulator_enable(thc63->vcc);
+	if (ret) {
+		dev_err(thc63->dev,
+			"Failed to enable regulator \"vcc\": %d\n", ret);
+		return;
+	}
+
+	gpiod_set_value(thc63->pdwn, 0);
+	gpiod_set_value(thc63->oe, 1);
+}
+
+static void thc63_disable(struct drm_bridge *bridge)
+{
+	struct thc63_dev *thc63 = to_thc63(bridge);
+	int ret;
+
+	gpiod_set_value(thc63->oe, 0);
+	gpiod_set_value(thc63->pdwn, 1);
+
+	ret = regulator_disable(thc63->vcc);
+	if (ret)
+		dev_err(thc63->dev,
+			"Failed to disable regulator \"vcc\": %d\n", ret);
+}
+
+static const struct drm_bridge_funcs thc63_bridge_func = {
+	.attach	= thc63_attach,
+	.enable = thc63_enable,
+	.disable = thc63_disable,
+};
+
+static int thc63_parse_dt(struct thc63_dev *thc63)
+{
+	struct device_node *thc63_out;
+	struct device_node *remote;
+
+	thc63_out = of_graph_get_endpoint_by_regs(thc63->dev->of_node,
+						  THC63_RGB_OUT0, -1);
+	if (!thc63_out) {
+		dev_err(thc63->dev, "Missing endpoint in port@%u\n",
+			THC63_RGB_OUT0);
+		return -ENODEV;
+	}
+
+	remote = of_graph_get_remote_port_parent(thc63_out);
+	of_node_put(thc63_out);
+	if (!remote) {
+		dev_err(thc63->dev, "Endpoint in port@%u unconnected\n",
+			THC63_RGB_OUT0);
+		return -ENODEV;
+	}
+
+	if (!of_device_is_available(remote)) {
+		dev_err(thc63->dev, "port@%u remote endpoint is disabled\n",
+			THC63_RGB_OUT0);
+		of_node_put(remote);
+		return -ENODEV;
+	}
+
+	thc63->next = of_drm_find_bridge(remote);
+	of_node_put(remote);
+	if (!thc63->next)
+		return -EPROBE_DEFER;
+
+	return 0;
+}
+
+static int thc63_gpio_init(struct thc63_dev *thc63)
+{
+	thc63->oe = devm_gpiod_get_optional(thc63->dev, "oe", GPIOD_OUT_LOW);
+	if (IS_ERR(thc63->oe)) {
+		dev_err(thc63->dev, "Unable to get \"oe-gpios\": %ld\n",
+			PTR_ERR(thc63->oe));
+		return PTR_ERR(thc63->oe);
+	}
+
+	thc63->pdwn = devm_gpiod_get_optional(thc63->dev, "powerdown",
+					      GPIOD_OUT_HIGH);
+	if (IS_ERR(thc63->pdwn)) {
+		dev_err(thc63->dev, "Unable to get \"powerdown-gpios\": %ld\n",
+			PTR_ERR(thc63->pdwn));
+		return PTR_ERR(thc63->pdwn);
+	}
+
+	return 0;
+}
+
+static int thc63_probe(struct platform_device *pdev)
+{
+	struct thc63_dev *thc63;
+	int ret;
+
+	thc63 = devm_kzalloc(&pdev->dev, sizeof(*thc63), GFP_KERNEL);
+	if (!thc63)
+		return -ENOMEM;
+
+	thc63->dev = &pdev->dev;
+	platform_set_drvdata(pdev, thc63);
+
+	thc63->vcc = devm_regulator_get_optional(thc63->dev, "vcc");
+	if (IS_ERR(thc63->vcc)) {
+		if (PTR_ERR(thc63->vcc) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+
+		dev_err(thc63->dev, "Unable to get \"vcc\" supply: %ld\n",
+			PTR_ERR(thc63->vcc));
+		return PTR_ERR(thc63->vcc);
+	}
+
+	ret = thc63_gpio_init(thc63);
+	if (ret)
+		return ret;
+
+	ret = thc63_parse_dt(thc63);
+	if (ret)
+		return ret;
+
+	thc63->bridge.driver_private = thc63;
+	thc63->bridge.of_node = pdev->dev.of_node;
+	thc63->bridge.funcs = &thc63_bridge_func;
+
+	drm_bridge_add(&thc63->bridge);
+
+	return 0;
+}
+
+static int thc63_remove(struct platform_device *pdev)
+{
+	struct thc63_dev *thc63 = platform_get_drvdata(pdev);
+
+	drm_bridge_remove(&thc63->bridge);
+
+	return 0;
+}
+
+static const struct of_device_id thc63_match[] = {
+	{ .compatible = "thine,thc63lvd1024", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, thc63_match);
+
+static struct platform_driver thc63_driver = {
+	.probe	= thc63_probe,
+	.remove	= thc63_remove,
+	.driver	= {
+		.name		= "thc63lvd1024",
+		.of_match_table	= thc63_match,
+	},
+};
+module_platform_driver(thc63_driver);
+
+MODULE_AUTHOR("Jacopo Mondi <jacopo@jmondi.org>");
+MODULE_DESCRIPTION("Thine THC63LVD1024 LVDS decoder DRM bridge driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpu/drm/bridge/ti-tfp410.c b/drivers/gpu/drm/bridge/ti-tfp410.c
new file mode 100644
index 000000000..9dc109df0
--- /dev/null
+++ b/drivers/gpu/drm/bridge/ti-tfp410.c
@@ -0,0 +1,380 @@
+/*
+ * Copyright (C) 2016 Texas Instruments
+ * Author: Jyri Sarha <jsarha@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/fwnode.h>
+#include <linux/gpio/consumer.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/of_graph.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+
+#include <drm/drmP.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_crtc_helper.h>
+
+#define HOTPLUG_DEBOUNCE_MS		1100
+
+struct tfp410 {
+	struct drm_bridge	bridge;
+	struct drm_connector	connector;
+
+	struct i2c_adapter	*ddc;
+	struct gpio_desc	*hpd;
+	struct delayed_work	hpd_work;
+
+	struct device *dev;
+};
+
+static inline struct tfp410 *
+drm_bridge_to_tfp410(struct drm_bridge *bridge)
+{
+	return container_of(bridge, struct tfp410, bridge);
+}
+
+static inline struct tfp410 *
+drm_connector_to_tfp410(struct drm_connector *connector)
+{
+	return container_of(connector, struct tfp410, connector);
+}
+
+static int tfp410_get_modes(struct drm_connector *connector)
+{
+	struct tfp410 *dvi = drm_connector_to_tfp410(connector);
+	struct edid *edid;
+	int ret;
+
+	if (!dvi->ddc)
+		goto fallback;
+
+	edid = drm_get_edid(connector, dvi->ddc);
+	if (!edid) {
+		DRM_INFO("EDID read failed. Fallback to standard modes\n");
+		goto fallback;
+	}
+
+	drm_connector_update_edid_property(connector, edid);
+
+	ret = drm_add_edid_modes(connector, edid);
+
+	kfree(edid);
+
+	return ret;
+
+fallback:
+	/* No EDID, fallback on the XGA standard modes */
+	ret = drm_add_modes_noedid(connector, 1920, 1200);
+
+	/* And prefer a mode pretty much anything can handle */
+	drm_set_preferred_mode(connector, 1024, 768);
+
+	return ret;
+}
+
+static const struct drm_connector_helper_funcs tfp410_con_helper_funcs = {
+	.get_modes	= tfp410_get_modes,
+};
+
+static enum drm_connector_status
+tfp410_connector_detect(struct drm_connector *connector, bool force)
+{
+	struct tfp410 *dvi = drm_connector_to_tfp410(connector);
+
+	if (dvi->hpd) {
+		if (gpiod_get_value_cansleep(dvi->hpd))
+			return connector_status_connected;
+		else
+			return connector_status_disconnected;
+	}
+
+	if (dvi->ddc) {
+		if (drm_probe_ddc(dvi->ddc))
+			return connector_status_connected;
+		else
+			return connector_status_disconnected;
+	}
+
+	return connector_status_unknown;
+}
+
+static const struct drm_connector_funcs tfp410_con_funcs = {
+	.detect			= tfp410_connector_detect,
+	.fill_modes		= drm_helper_probe_single_connector_modes,
+	.destroy		= drm_connector_cleanup,
+	.reset			= drm_atomic_helper_connector_reset,
+	.atomic_duplicate_state	= drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state	= drm_atomic_helper_connector_destroy_state,
+};
+
+static int tfp410_attach(struct drm_bridge *bridge)
+{
+	struct tfp410 *dvi = drm_bridge_to_tfp410(bridge);
+	int ret;
+
+	if (!bridge->encoder) {
+		dev_err(dvi->dev, "Missing encoder\n");
+		return -ENODEV;
+	}
+
+	if (dvi->hpd)
+		dvi->connector.polled = DRM_CONNECTOR_POLL_HPD;
+
+	drm_connector_helper_add(&dvi->connector,
+				 &tfp410_con_helper_funcs);
+	ret = drm_connector_init(bridge->dev, &dvi->connector,
+				 &tfp410_con_funcs, DRM_MODE_CONNECTOR_HDMIA);
+	if (ret) {
+		dev_err(dvi->dev, "drm_connector_init() failed: %d\n", ret);
+		return ret;
+	}
+
+	drm_connector_attach_encoder(&dvi->connector,
+					  bridge->encoder);
+
+	return 0;
+}
+
+static const struct drm_bridge_funcs tfp410_bridge_funcs = {
+	.attach		= tfp410_attach,
+};
+
+static void tfp410_hpd_work_func(struct work_struct *work)
+{
+	struct tfp410 *dvi;
+
+	dvi = container_of(work, struct tfp410, hpd_work.work);
+
+	if (dvi->bridge.dev)
+		drm_helper_hpd_irq_event(dvi->bridge.dev);
+}
+
+static irqreturn_t tfp410_hpd_irq_thread(int irq, void *arg)
+{
+	struct tfp410 *dvi = arg;
+
+	mod_delayed_work(system_wq, &dvi->hpd_work,
+			msecs_to_jiffies(HOTPLUG_DEBOUNCE_MS));
+
+	return IRQ_HANDLED;
+}
+
+static int tfp410_get_connector_properties(struct tfp410 *dvi)
+{
+	struct device_node *connector_node, *ddc_phandle;
+	int ret = 0;
+
+	/* port@1 is the connector node */
+	connector_node = of_graph_get_remote_node(dvi->dev->of_node, 1, -1);
+	if (!connector_node)
+		return -ENODEV;
+
+	dvi->hpd = fwnode_get_named_gpiod(&connector_node->fwnode,
+					"hpd-gpios", 0, GPIOD_IN, "hpd");
+	if (IS_ERR(dvi->hpd)) {
+		ret = PTR_ERR(dvi->hpd);
+		dvi->hpd = NULL;
+		if (ret == -ENOENT)
+			ret = 0;
+		else
+			goto fail;
+	}
+
+	ddc_phandle = of_parse_phandle(connector_node, "ddc-i2c-bus", 0);
+	if (!ddc_phandle)
+		goto fail;
+
+	dvi->ddc = of_get_i2c_adapter_by_node(ddc_phandle);
+	if (dvi->ddc)
+		dev_info(dvi->dev, "Connector's ddc i2c bus found\n");
+	else
+		ret = -EPROBE_DEFER;
+
+	of_node_put(ddc_phandle);
+
+fail:
+	of_node_put(connector_node);
+	return ret;
+}
+
+static int tfp410_init(struct device *dev)
+{
+	struct tfp410 *dvi;
+	int ret;
+
+	if (!dev->of_node) {
+		dev_err(dev, "device-tree data is missing\n");
+		return -ENXIO;
+	}
+
+	dvi = devm_kzalloc(dev, sizeof(*dvi), GFP_KERNEL);
+	if (!dvi)
+		return -ENOMEM;
+	dev_set_drvdata(dev, dvi);
+
+	dvi->bridge.funcs = &tfp410_bridge_funcs;
+	dvi->bridge.of_node = dev->of_node;
+	dvi->dev = dev;
+
+	ret = tfp410_get_connector_properties(dvi);
+	if (ret)
+		goto fail;
+
+	if (dvi->hpd) {
+		INIT_DELAYED_WORK(&dvi->hpd_work, tfp410_hpd_work_func);
+
+		ret = devm_request_threaded_irq(dev, gpiod_to_irq(dvi->hpd),
+			NULL, tfp410_hpd_irq_thread, IRQF_TRIGGER_RISING |
+			IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+			"hdmi-hpd", dvi);
+		if (ret) {
+			DRM_ERROR("failed to register hpd interrupt\n");
+			goto fail;
+		}
+	}
+
+	drm_bridge_add(&dvi->bridge);
+
+	return 0;
+fail:
+	i2c_put_adapter(dvi->ddc);
+	if (dvi->hpd)
+		gpiod_put(dvi->hpd);
+	return ret;
+}
+
+static int tfp410_fini(struct device *dev)
+{
+	struct tfp410 *dvi = dev_get_drvdata(dev);
+
+	cancel_delayed_work_sync(&dvi->hpd_work);
+
+	drm_bridge_remove(&dvi->bridge);
+
+	if (dvi->ddc)
+		i2c_put_adapter(dvi->ddc);
+	if (dvi->hpd)
+		gpiod_put(dvi->hpd);
+
+	return 0;
+}
+
+static int tfp410_probe(struct platform_device *pdev)
+{
+	return tfp410_init(&pdev->dev);
+}
+
+static int tfp410_remove(struct platform_device *pdev)
+{
+	return tfp410_fini(&pdev->dev);
+}
+
+static const struct of_device_id tfp410_match[] = {
+	{ .compatible = "ti,tfp410" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, tfp410_match);
+
+static struct platform_driver tfp410_platform_driver = {
+	.probe	= tfp410_probe,
+	.remove	= tfp410_remove,
+	.driver	= {
+		.name		= "tfp410-bridge",
+		.of_match_table	= tfp410_match,
+	},
+};
+
+#if IS_ENABLED(CONFIG_I2C)
+/* There is currently no i2c functionality. */
+static int tfp410_i2c_probe(struct i2c_client *client,
+			    const struct i2c_device_id *id)
+{
+	int reg;
+
+	if (!client->dev.of_node ||
+	    of_property_read_u32(client->dev.of_node, "reg", &reg)) {
+		dev_err(&client->dev,
+			"Can't get i2c reg property from device-tree\n");
+		return -ENXIO;
+	}
+
+	return tfp410_init(&client->dev);
+}
+
+static int tfp410_i2c_remove(struct i2c_client *client)
+{
+	return tfp410_fini(&client->dev);
+}
+
+static const struct i2c_device_id tfp410_i2c_ids[] = {
+	{ "tfp410", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, tfp410_i2c_ids);
+
+static struct i2c_driver tfp410_i2c_driver = {
+	.driver = {
+		.name	= "tfp410",
+		.of_match_table = of_match_ptr(tfp410_match),
+	},
+	.id_table	= tfp410_i2c_ids,
+	.probe		= tfp410_i2c_probe,
+	.remove		= tfp410_i2c_remove,
+};
+#endif /* IS_ENABLED(CONFIG_I2C) */
+
+static struct {
+	uint i2c:1;
+	uint platform:1;
+}  tfp410_registered_driver;
+
+static int __init tfp410_module_init(void)
+{
+	int ret;
+
+#if IS_ENABLED(CONFIG_I2C)
+	ret = i2c_add_driver(&tfp410_i2c_driver);
+	if (ret)
+		pr_err("%s: registering i2c driver failed: %d",
+		       __func__, ret);
+	else
+		tfp410_registered_driver.i2c = 1;
+#endif
+
+	ret = platform_driver_register(&tfp410_platform_driver);
+	if (ret)
+		pr_err("%s: registering platform driver failed: %d",
+		       __func__, ret);
+	else
+		tfp410_registered_driver.platform = 1;
+
+	if (tfp410_registered_driver.i2c ||
+	    tfp410_registered_driver.platform)
+		return 0;
+
+	return ret;
+}
+module_init(tfp410_module_init);
+
+static void __exit tfp410_module_exit(void)
+{
+#if IS_ENABLED(CONFIG_I2C)
+	if (tfp410_registered_driver.i2c)
+		i2c_del_driver(&tfp410_i2c_driver);
+#endif
+	if (tfp410_registered_driver.platform)
+		platform_driver_unregister(&tfp410_platform_driver);
+}
+module_exit(tfp410_module_exit);
+
+MODULE_AUTHOR("Jyri Sarha <jsarha@ti.com>");
+MODULE_DESCRIPTION("TI TFP410 DVI bridge driver");
+MODULE_LICENSE("GPL");