Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 667 insertions, 0 deletions

diff --git a/drivers/gpu/drm/i915/intel_hotplug.c b/drivers/gpu/drm/i915/intel_hotplug.c
new file mode 100644
index 000000000..9a8018130
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_hotplug.c
@@ -0,0 +1,667 @@
+/*
+ * Copyright © 2015 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+#include <linux/kernel.h>
+
+#include <drm/drmP.h>
+#include <drm/i915_drm.h>
+
+#include "i915_drv.h"
+#include "intel_drv.h"
+
+/**
+ * DOC: Hotplug
+ *
+ * Simply put, hotplug occurs when a display is connected to or disconnected
+ * from the system. However, there may be adapters and docking stations and
+ * Display Port short pulses and MST devices involved, complicating matters.
+ *
+ * Hotplug in i915 is handled in many different levels of abstraction.
+ *
+ * The platform dependent interrupt handling code in i915_irq.c enables,
+ * disables, and does preliminary handling of the interrupts. The interrupt
+ * handlers gather the hotplug detect (HPD) information from relevant registers
+ * into a platform independent mask of hotplug pins that have fired.
+ *
+ * The platform independent interrupt handler intel_hpd_irq_handler() in
+ * intel_hotplug.c does hotplug irq storm detection and mitigation, and passes
+ * further processing to appropriate bottom halves (Display Port specific and
+ * regular hotplug).
+ *
+ * The Display Port work function i915_digport_work_func() calls into
+ * intel_dp_hpd_pulse() via hooks, which handles DP short pulses and DP MST long
+ * pulses, with failures and non-MST long pulses triggering regular hotplug
+ * processing on the connector.
+ *
+ * The regular hotplug work function i915_hotplug_work_func() calls connector
+ * detect hooks, and, if connector status changes, triggers sending of hotplug
+ * uevent to userspace via drm_kms_helper_hotplug_event().
+ *
+ * Finally, the userspace is responsible for triggering a modeset upon receiving
+ * the hotplug uevent, disabling or enabling the crtc as needed.
+ *
+ * The hotplug interrupt storm detection and mitigation code keeps track of the
+ * number of interrupts per hotplug pin per a period of time, and if the number
+ * of interrupts exceeds a certain threshold, the interrupt is disabled for a
+ * while before being re-enabled. The intention is to mitigate issues raising
+ * from broken hardware triggering massive amounts of interrupts and grinding
+ * the system to a halt.
+ *
+ * Current implementation expects that hotplug interrupt storm will not be
+ * seen when display port sink is connected, hence on platforms whose DP
+ * callback is handled by i915_digport_work_func reenabling of hpd is not
+ * performed (it was never expected to be disabled in the first place ;) )
+ * this is specific to DP sinks handled by this routine and any other display
+ * such as HDMI or DVI enabled on the same port will have proper logic since
+ * it will use i915_hotplug_work_func where this logic is handled.
+ */
+
+/**
+ * intel_hpd_pin_default - return default pin associated with certain port.
+ * @dev_priv: private driver data pointer
+ * @port: the hpd port to get associated pin
+ *
+ * It is only valid and used by digital port encoder.
+ *
+ * Return pin that is associatade with @port and HDP_NONE if no pin is
+ * hard associated with that @port.
+ */
+enum hpd_pin intel_hpd_pin_default(struct drm_i915_private *dev_priv,
+				   enum port port)
+{
+	switch (port) {
+	case PORT_A:
+		return HPD_PORT_A;
+	case PORT_B:
+		return HPD_PORT_B;
+	case PORT_C:
+		return HPD_PORT_C;
+	case PORT_D:
+		return HPD_PORT_D;
+	case PORT_E:
+		return HPD_PORT_E;
+	case PORT_F:
+		if (IS_CNL_WITH_PORT_F(dev_priv))
+			return HPD_PORT_E;
+		return HPD_PORT_F;
+	default:
+		MISSING_CASE(port);
+		return HPD_NONE;
+	}
+}
+
+#define HPD_STORM_DETECT_PERIOD		1000
+#define HPD_STORM_REENABLE_DELAY	(2 * 60 * 1000)
+
+/**
+ * intel_hpd_irq_storm_detect - gather stats and detect HPD irq storm on a pin
+ * @dev_priv: private driver data pointer
+ * @pin: the pin to gather stats on
+ *
+ * Gather stats about HPD irqs from the specified @pin, and detect irq
+ * storms. Only the pin specific stats and state are changed, the caller is
+ * responsible for further action.
+ *
+ * The number of irqs that are allowed within @HPD_STORM_DETECT_PERIOD is
+ * stored in @dev_priv->hotplug.hpd_storm_threshold which defaults to
+ * @HPD_STORM_DEFAULT_THRESHOLD. If this threshold is exceeded, it's
+ * considered an irq storm and the irq state is set to @HPD_MARK_DISABLED.
+ *
+ * The HPD threshold can be controlled through i915_hpd_storm_ctl in debugfs,
+ * and should only be adjusted for automated hotplug testing.
+ *
+ * Return true if an irq storm was detected on @pin.
+ */
+static bool intel_hpd_irq_storm_detect(struct drm_i915_private *dev_priv,
+				       enum hpd_pin pin)
+{
+	unsigned long start = dev_priv->hotplug.stats[pin].last_jiffies;
+	unsigned long end = start + msecs_to_jiffies(HPD_STORM_DETECT_PERIOD);
+	const int threshold = dev_priv->hotplug.hpd_storm_threshold;
+	bool storm = false;
+
+	if (!time_in_range(jiffies, start, end)) {
+		dev_priv->hotplug.stats[pin].last_jiffies = jiffies;
+		dev_priv->hotplug.stats[pin].count = 0;
+		DRM_DEBUG_KMS("Received HPD interrupt on PIN %d - cnt: 0\n", pin);
+	} else if (dev_priv->hotplug.stats[pin].count > threshold &&
+		   threshold) {
+		dev_priv->hotplug.stats[pin].state = HPD_MARK_DISABLED;
+		DRM_DEBUG_KMS("HPD interrupt storm detected on PIN %d\n", pin);
+		storm = true;
+	} else {
+		dev_priv->hotplug.stats[pin].count++;
+		DRM_DEBUG_KMS("Received HPD interrupt on PIN %d - cnt: %d\n", pin,
+			      dev_priv->hotplug.stats[pin].count);
+	}
+
+	return storm;
+}
+
+static void intel_hpd_irq_storm_disable(struct drm_i915_private *dev_priv)
+{
+	struct drm_device *dev = &dev_priv->drm;
+	struct intel_connector *intel_connector;
+	struct intel_encoder *intel_encoder;
+	struct drm_connector *connector;
+	struct drm_connector_list_iter conn_iter;
+	enum hpd_pin pin;
+	bool hpd_disabled = false;
+
+	lockdep_assert_held(&dev_priv->irq_lock);
+
+	drm_connector_list_iter_begin(dev, &conn_iter);
+	drm_for_each_connector_iter(connector, &conn_iter) {
+		if (connector->polled != DRM_CONNECTOR_POLL_HPD)
+			continue;
+
+		intel_connector = to_intel_connector(connector);
+		intel_encoder = intel_connector->encoder;
+		if (!intel_encoder)
+			continue;
+
+		pin = intel_encoder->hpd_pin;
+		if (pin == HPD_NONE ||
+		    dev_priv->hotplug.stats[pin].state != HPD_MARK_DISABLED)
+			continue;
+
+		DRM_INFO("HPD interrupt storm detected on connector %s: "
+			 "switching from hotplug detection to polling\n",
+			 connector->name);
+
+		dev_priv->hotplug.stats[pin].state = HPD_DISABLED;
+		connector->polled = DRM_CONNECTOR_POLL_CONNECT
+			| DRM_CONNECTOR_POLL_DISCONNECT;
+		hpd_disabled = true;
+	}
+	drm_connector_list_iter_end(&conn_iter);
+
+	/* Enable polling and queue hotplug re-enabling. */
+	if (hpd_disabled) {
+		drm_kms_helper_poll_enable(dev);
+		mod_delayed_work(system_wq, &dev_priv->hotplug.reenable_work,
+				 msecs_to_jiffies(HPD_STORM_REENABLE_DELAY));
+	}
+}
+
+static void intel_hpd_irq_storm_reenable_work(struct work_struct *work)
+{
+	struct drm_i915_private *dev_priv =
+		container_of(work, typeof(*dev_priv),
+			     hotplug.reenable_work.work);
+	struct drm_device *dev = &dev_priv->drm;
+	enum hpd_pin pin;
+
+	intel_runtime_pm_get(dev_priv);
+
+	spin_lock_irq(&dev_priv->irq_lock);
+	for_each_hpd_pin(pin) {
+		struct drm_connector *connector;
+		struct drm_connector_list_iter conn_iter;
+
+		if (dev_priv->hotplug.stats[pin].state != HPD_DISABLED)
+			continue;
+
+		dev_priv->hotplug.stats[pin].state = HPD_ENABLED;
+
+		drm_connector_list_iter_begin(dev, &conn_iter);
+		drm_for_each_connector_iter(connector, &conn_iter) {
+			struct intel_connector *intel_connector = to_intel_connector(connector);
+
+			/* Don't check MST ports, they don't have pins */
+			if (!intel_connector->mst_port &&
+			    intel_connector->encoder->hpd_pin == pin) {
+				if (connector->polled != intel_connector->polled)
+					DRM_DEBUG_DRIVER("Reenabling HPD on connector %s\n",
+							 connector->name);
+				connector->polled = intel_connector->polled;
+				if (!connector->polled)
+					connector->polled = DRM_CONNECTOR_POLL_HPD;
+			}
+		}
+		drm_connector_list_iter_end(&conn_iter);
+	}
+	if (dev_priv->display_irqs_enabled && dev_priv->display.hpd_irq_setup)
+		dev_priv->display.hpd_irq_setup(dev_priv);
+	spin_unlock_irq(&dev_priv->irq_lock);
+
+	intel_runtime_pm_put(dev_priv);
+}
+
+bool intel_encoder_hotplug(struct intel_encoder *encoder,
+			   struct intel_connector *connector)
+{
+	struct drm_device *dev = connector->base.dev;
+	enum drm_connector_status old_status;
+
+	WARN_ON(!mutex_is_locked(&dev->mode_config.mutex));
+	old_status = connector->base.status;
+
+	connector->base.status =
+		drm_helper_probe_detect(&connector->base, NULL, false);
+
+	if (old_status == connector->base.status)
+		return false;
+
+	DRM_DEBUG_KMS("[CONNECTOR:%d:%s] status updated from %s to %s\n",
+		      connector->base.base.id,
+		      connector->base.name,
+		      drm_get_connector_status_name(old_status),
+		      drm_get_connector_status_name(connector->base.status));
+
+	return true;
+}
+
+static bool intel_encoder_has_hpd_pulse(struct intel_encoder *encoder)
+{
+	return intel_encoder_is_dig_port(encoder) &&
+		enc_to_dig_port(&encoder->base)->hpd_pulse != NULL;
+}
+
+static void i915_digport_work_func(struct work_struct *work)
+{
+	struct drm_i915_private *dev_priv =
+		container_of(work, struct drm_i915_private, hotplug.dig_port_work);
+	u32 long_port_mask, short_port_mask;
+	struct intel_encoder *encoder;
+	u32 old_bits = 0;
+
+	spin_lock_irq(&dev_priv->irq_lock);
+	long_port_mask = dev_priv->hotplug.long_port_mask;
+	dev_priv->hotplug.long_port_mask = 0;
+	short_port_mask = dev_priv->hotplug.short_port_mask;
+	dev_priv->hotplug.short_port_mask = 0;
+	spin_unlock_irq(&dev_priv->irq_lock);
+
+	for_each_intel_encoder(&dev_priv->drm, encoder) {
+		struct intel_digital_port *dig_port;
+		enum port port = encoder->port;
+		bool long_hpd, short_hpd;
+		enum irqreturn ret;
+
+		if (!intel_encoder_has_hpd_pulse(encoder))
+			continue;
+
+		long_hpd = long_port_mask & BIT(port);
+		short_hpd = short_port_mask & BIT(port);
+
+		if (!long_hpd && !short_hpd)
+			continue;
+
+		dig_port = enc_to_dig_port(&encoder->base);
+
+		ret = dig_port->hpd_pulse(dig_port, long_hpd);
+		if (ret == IRQ_NONE) {
+			/* fall back to old school hpd */
+			old_bits |= BIT(encoder->hpd_pin);
+		}
+	}
+
+	if (old_bits) {
+		spin_lock_irq(&dev_priv->irq_lock);
+		dev_priv->hotplug.event_bits |= old_bits;
+		spin_unlock_irq(&dev_priv->irq_lock);
+		schedule_work(&dev_priv->hotplug.hotplug_work);
+	}
+}
+
+/*
+ * Handle hotplug events outside the interrupt handler proper.
+ */
+static void i915_hotplug_work_func(struct work_struct *work)
+{
+	struct drm_i915_private *dev_priv =
+		container_of(work, struct drm_i915_private, hotplug.hotplug_work);
+	struct drm_device *dev = &dev_priv->drm;
+	struct intel_connector *intel_connector;
+	struct intel_encoder *intel_encoder;
+	struct drm_connector *connector;
+	struct drm_connector_list_iter conn_iter;
+	bool changed = false;
+	u32 hpd_event_bits;
+
+	mutex_lock(&dev->mode_config.mutex);
+	DRM_DEBUG_KMS("running encoder hotplug functions\n");
+
+	spin_lock_irq(&dev_priv->irq_lock);
+
+	hpd_event_bits = dev_priv->hotplug.event_bits;
+	dev_priv->hotplug.event_bits = 0;
+
+	/* Disable hotplug on connectors that hit an irq storm. */
+	intel_hpd_irq_storm_disable(dev_priv);
+
+	spin_unlock_irq(&dev_priv->irq_lock);
+
+	drm_connector_list_iter_begin(dev, &conn_iter);
+	drm_for_each_connector_iter(connector, &conn_iter) {
+		intel_connector = to_intel_connector(connector);
+		if (!intel_connector->encoder)
+			continue;
+		intel_encoder = intel_connector->encoder;
+		if (hpd_event_bits & (1 << intel_encoder->hpd_pin)) {
+			DRM_DEBUG_KMS("Connector %s (pin %i) received hotplug event.\n",
+				      connector->name, intel_encoder->hpd_pin);
+
+			changed |= intel_encoder->hotplug(intel_encoder,
+							  intel_connector);
+		}
+	}
+	drm_connector_list_iter_end(&conn_iter);
+	mutex_unlock(&dev->mode_config.mutex);
+
+	if (changed)
+		drm_kms_helper_hotplug_event(dev);
+}
+
+
+/**
+ * intel_hpd_irq_handler - main hotplug irq handler
+ * @dev_priv: drm_i915_private
+ * @pin_mask: a mask of hpd pins that have triggered the irq
+ * @long_mask: a mask of hpd pins that may be long hpd pulses
+ *
+ * This is the main hotplug irq handler for all platforms. The platform specific
+ * irq handlers call the platform specific hotplug irq handlers, which read and
+ * decode the appropriate registers into bitmasks about hpd pins that have
+ * triggered (@pin_mask), and which of those pins may be long pulses
+ * (@long_mask). The @long_mask is ignored if the port corresponding to the pin
+ * is not a digital port.
+ *
+ * Here, we do hotplug irq storm detection and mitigation, and pass further
+ * processing to appropriate bottom halves.
+ */
+void intel_hpd_irq_handler(struct drm_i915_private *dev_priv,
+			   u32 pin_mask, u32 long_mask)
+{
+	struct intel_encoder *encoder;
+	bool storm_detected = false;
+	bool queue_dig = false, queue_hp = false;
+	u32 long_hpd_pulse_mask = 0;
+	u32 short_hpd_pulse_mask = 0;
+	enum hpd_pin pin;
+
+	if (!pin_mask)
+		return;
+
+	spin_lock(&dev_priv->irq_lock);
+
+	/*
+	 * Determine whether ->hpd_pulse() exists for each pin, and
+	 * whether we have a short or a long pulse. This is needed
+	 * as each pin may have up to two encoders (HDMI and DP) and
+	 * only the one of them (DP) will have ->hpd_pulse().
+	 */
+	for_each_intel_encoder(&dev_priv->drm, encoder) {
+		bool has_hpd_pulse = intel_encoder_has_hpd_pulse(encoder);
+		enum port port = encoder->port;
+		bool long_hpd;
+
+		pin = encoder->hpd_pin;
+		if (!(BIT(pin) & pin_mask))
+			continue;
+
+		if (!has_hpd_pulse)
+			continue;
+
+		long_hpd = long_mask & BIT(pin);
+
+		DRM_DEBUG_DRIVER("digital hpd port %c - %s\n", port_name(port),
+				 long_hpd ? "long" : "short");
+		queue_dig = true;
+
+		if (long_hpd) {
+			long_hpd_pulse_mask |= BIT(pin);
+			dev_priv->hotplug.long_port_mask |= BIT(port);
+		} else {
+			short_hpd_pulse_mask |= BIT(pin);
+			dev_priv->hotplug.short_port_mask |= BIT(port);
+		}
+	}
+
+	/* Now process each pin just once */
+	for_each_hpd_pin(pin) {
+		bool long_hpd;
+
+		if (!(BIT(pin) & pin_mask))
+			continue;
+
+		if (dev_priv->hotplug.stats[pin].state == HPD_DISABLED) {
+			/*
+			 * On GMCH platforms the interrupt mask bits only
+			 * prevent irq generation, not the setting of the
+			 * hotplug bits itself. So only WARN about unexpected
+			 * interrupts on saner platforms.
+			 */
+			WARN_ONCE(!HAS_GMCH_DISPLAY(dev_priv),
+				  "Received HPD interrupt on pin %d although disabled\n", pin);
+			continue;
+		}
+
+		if (dev_priv->hotplug.stats[pin].state != HPD_ENABLED)
+			continue;
+
+		/*
+		 * Delegate to ->hpd_pulse() if one of the encoders for this
+		 * pin has it, otherwise let the hotplug_work deal with this
+		 * pin directly.
+		 */
+		if (((short_hpd_pulse_mask | long_hpd_pulse_mask) & BIT(pin))) {
+			long_hpd = long_hpd_pulse_mask & BIT(pin);
+		} else {
+			dev_priv->hotplug.event_bits |= BIT(pin);
+			long_hpd = true;
+			queue_hp = true;
+		}
+
+		if (!long_hpd)
+			continue;
+
+		if (intel_hpd_irq_storm_detect(dev_priv, pin)) {
+			dev_priv->hotplug.event_bits &= ~BIT(pin);
+			storm_detected = true;
+		}
+	}
+
+	if (storm_detected && dev_priv->display_irqs_enabled)
+		dev_priv->display.hpd_irq_setup(dev_priv);
+	spin_unlock(&dev_priv->irq_lock);
+
+	/*
+	 * Our hotplug handler can grab modeset locks (by calling down into the
+	 * fb helpers). Hence it must not be run on our own dev-priv->wq work
+	 * queue for otherwise the flush_work in the pageflip code will
+	 * deadlock.
+	 */
+	if (queue_dig)
+		queue_work(dev_priv->hotplug.dp_wq, &dev_priv->hotplug.dig_port_work);
+	if (queue_hp)
+		schedule_work(&dev_priv->hotplug.hotplug_work);
+}
+
+/**
+ * intel_hpd_init - initializes and enables hpd support
+ * @dev_priv: i915 device instance
+ *
+ * This function enables the hotplug support. It requires that interrupts have
+ * already been enabled with intel_irq_init_hw(). From this point on hotplug and
+ * poll request can run concurrently to other code, so locking rules must be
+ * obeyed.
+ *
+ * This is a separate step from interrupt enabling to simplify the locking rules
+ * in the driver load and resume code.
+ *
+ * Also see: intel_hpd_poll_init(), which enables connector polling
+ */
+void intel_hpd_init(struct drm_i915_private *dev_priv)
+{
+	int i;
+
+	for_each_hpd_pin(i) {
+		dev_priv->hotplug.stats[i].count = 0;
+		dev_priv->hotplug.stats[i].state = HPD_ENABLED;
+	}
+
+	WRITE_ONCE(dev_priv->hotplug.poll_enabled, false);
+	schedule_work(&dev_priv->hotplug.poll_init_work);
+
+	/*
+	 * Interrupt setup is already guaranteed to be single-threaded, this is
+	 * just to make the assert_spin_locked checks happy.
+	 */
+	if (dev_priv->display_irqs_enabled && dev_priv->display.hpd_irq_setup) {
+		spin_lock_irq(&dev_priv->irq_lock);
+		if (dev_priv->display_irqs_enabled)
+			dev_priv->display.hpd_irq_setup(dev_priv);
+		spin_unlock_irq(&dev_priv->irq_lock);
+	}
+}
+
+static void i915_hpd_poll_init_work(struct work_struct *work)
+{
+	struct drm_i915_private *dev_priv =
+		container_of(work, struct drm_i915_private,
+			     hotplug.poll_init_work);
+	struct drm_device *dev = &dev_priv->drm;
+	struct drm_connector *connector;
+	struct drm_connector_list_iter conn_iter;
+	bool enabled;
+
+	mutex_lock(&dev->mode_config.mutex);
+
+	enabled = READ_ONCE(dev_priv->hotplug.poll_enabled);
+
+	drm_connector_list_iter_begin(dev, &conn_iter);
+	drm_for_each_connector_iter(connector, &conn_iter) {
+		struct intel_connector *intel_connector =
+			to_intel_connector(connector);
+		connector->polled = intel_connector->polled;
+
+		/* MST has a dynamic intel_connector->encoder and it's reprobing
+		 * is all handled by the MST helpers. */
+		if (intel_connector->mst_port)
+			continue;
+
+		if (!connector->polled && I915_HAS_HOTPLUG(dev_priv) &&
+		    intel_connector->encoder->hpd_pin > HPD_NONE) {
+			connector->polled = enabled ?
+				DRM_CONNECTOR_POLL_CONNECT |
+				DRM_CONNECTOR_POLL_DISCONNECT :
+				DRM_CONNECTOR_POLL_HPD;
+		}
+	}
+	drm_connector_list_iter_end(&conn_iter);
+
+	if (enabled)
+		drm_kms_helper_poll_enable(dev);
+
+	mutex_unlock(&dev->mode_config.mutex);
+
+	/*
+	 * We might have missed any hotplugs that happened while we were
+	 * in the middle of disabling polling
+	 */
+	if (!enabled)
+		drm_helper_hpd_irq_event(dev);
+}
+
+/**
+ * intel_hpd_poll_init - enables/disables polling for connectors with hpd
+ * @dev_priv: i915 device instance
+ *
+ * This function enables polling for all connectors, regardless of whether or
+ * not they support hotplug detection. Under certain conditions HPD may not be
+ * functional. On most Intel GPUs, this happens when we enter runtime suspend.
+ * On Valleyview and Cherryview systems, this also happens when we shut off all
+ * of the powerwells.
+ *
+ * Since this function can get called in contexts where we're already holding
+ * dev->mode_config.mutex, we do the actual hotplug enabling in a seperate
+ * worker.
+ *
+ * Also see: intel_hpd_init(), which restores hpd handling.
+ */
+void intel_hpd_poll_init(struct drm_i915_private *dev_priv)
+{
+	WRITE_ONCE(dev_priv->hotplug.poll_enabled, true);
+
+	/*
+	 * We might already be holding dev->mode_config.mutex, so do this in a
+	 * seperate worker
+	 * As well, there's no issue if we race here since we always reschedule
+	 * this worker anyway
+	 */
+	schedule_work(&dev_priv->hotplug.poll_init_work);
+}
+
+void intel_hpd_init_work(struct drm_i915_private *dev_priv)
+{
+	INIT_WORK(&dev_priv->hotplug.hotplug_work, i915_hotplug_work_func);
+	INIT_WORK(&dev_priv->hotplug.dig_port_work, i915_digport_work_func);
+	INIT_WORK(&dev_priv->hotplug.poll_init_work, i915_hpd_poll_init_work);
+	INIT_DELAYED_WORK(&dev_priv->hotplug.reenable_work,
+			  intel_hpd_irq_storm_reenable_work);
+}
+
+void intel_hpd_cancel_work(struct drm_i915_private *dev_priv)
+{
+	spin_lock_irq(&dev_priv->irq_lock);
+
+	dev_priv->hotplug.long_port_mask = 0;
+	dev_priv->hotplug.short_port_mask = 0;
+	dev_priv->hotplug.event_bits = 0;
+
+	spin_unlock_irq(&dev_priv->irq_lock);
+
+	cancel_work_sync(&dev_priv->hotplug.dig_port_work);
+	cancel_work_sync(&dev_priv->hotplug.hotplug_work);
+	cancel_work_sync(&dev_priv->hotplug.poll_init_work);
+	cancel_delayed_work_sync(&dev_priv->hotplug.reenable_work);
+}
+
+bool intel_hpd_disable(struct drm_i915_private *dev_priv, enum hpd_pin pin)
+{
+	bool ret = false;
+
+	if (pin == HPD_NONE)
+		return false;
+
+	spin_lock_irq(&dev_priv->irq_lock);
+	if (dev_priv->hotplug.stats[pin].state == HPD_ENABLED) {
+		dev_priv->hotplug.stats[pin].state = HPD_DISABLED;
+		ret = true;
+	}
+	spin_unlock_irq(&dev_priv->irq_lock);
+
+	return ret;
+}
+
+void intel_hpd_enable(struct drm_i915_private *dev_priv, enum hpd_pin pin)
+{
+	if (pin == HPD_NONE)
+		return;
+
+	spin_lock_irq(&dev_priv->irq_lock);
+	dev_priv->hotplug.stats[pin].state = HPD_ENABLED;
+	spin_unlock_irq(&dev_priv->irq_lock);
+}