Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 320 insertions, 0 deletions

diff --git a/drivers/gpu/drm/mxsfb/mxsfb_crtc.c b/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
new file mode 100644
index 000000000..0abe77675
--- /dev/null
+++ b/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
@@ -0,0 +1,320 @@
+/*
+ * Copyright (C) 2016 Marek Vasut <marex@denx.de>
+ *
+ * This code is based on drivers/video/fbdev/mxsfb.c :
+ * Copyright (C) 2010 Juergen Beisert, Pengutronix
+ * Copyright (C) 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <drm/drmP.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_fb_helper.h>
+#include <drm/drm_fb_cma_helper.h>
+#include <drm/drm_gem_cma_helper.h>
+#include <drm/drm_of.h>
+#include <drm/drm_plane_helper.h>
+#include <drm/drm_simple_kms_helper.h>
+#include <linux/clk.h>
+#include <linux/iopoll.h>
+#include <linux/of_graph.h>
+#include <linux/platform_data/simplefb.h>
+#include <video/videomode.h>
+
+#include "mxsfb_drv.h"
+#include "mxsfb_regs.h"
+
+#define MXS_SET_ADDR		0x4
+#define MXS_CLR_ADDR		0x8
+#define MODULE_CLKGATE		BIT(30)
+#define MODULE_SFTRST		BIT(31)
+/* 1 second delay should be plenty of time for block reset */
+#define RESET_TIMEOUT		1000000
+
+static u32 set_hsync_pulse_width(struct mxsfb_drm_private *mxsfb, u32 val)
+{
+	return (val & mxsfb->devdata->hs_wdth_mask) <<
+		mxsfb->devdata->hs_wdth_shift;
+}
+
+/* Setup the MXSFB registers for decoding the pixels out of the framebuffer */
+static int mxsfb_set_pixel_fmt(struct mxsfb_drm_private *mxsfb)
+{
+	struct drm_crtc *crtc = &mxsfb->pipe.crtc;
+	struct drm_device *drm = crtc->dev;
+	const u32 format = crtc->primary->state->fb->format->format;
+	u32 ctrl, ctrl1;
+
+	ctrl = CTRL_BYPASS_COUNT | CTRL_MASTER;
+
+	/*
+	 * WARNING: The bus width, CTRL_SET_BUS_WIDTH(), is configured to
+	 * match the selected mode here. This differs from the original
+	 * MXSFB driver, which had the option to configure the bus width
+	 * to arbitrary value. This limitation should not pose an issue.
+	 */
+
+	/* CTRL1 contains IRQ config and status bits, preserve those. */
+	ctrl1 = readl(mxsfb->base + LCDC_CTRL1);
+	ctrl1 &= CTRL1_CUR_FRAME_DONE_IRQ_EN | CTRL1_CUR_FRAME_DONE_IRQ;
+
+	switch (format) {
+	case DRM_FORMAT_RGB565:
+		dev_dbg(drm->dev, "Setting up RGB565 mode\n");
+		ctrl |= CTRL_SET_WORD_LENGTH(0);
+		ctrl1 |= CTRL1_SET_BYTE_PACKAGING(0xf);
+		break;
+	case DRM_FORMAT_XRGB8888:
+		dev_dbg(drm->dev, "Setting up XRGB8888 mode\n");
+		ctrl |= CTRL_SET_WORD_LENGTH(3);
+		/* Do not use packed pixels = one pixel per word instead. */
+		ctrl1 |= CTRL1_SET_BYTE_PACKAGING(0x7);
+		break;
+	default:
+		dev_err(drm->dev, "Unhandled pixel format %08x\n", format);
+		return -EINVAL;
+	}
+
+	writel(ctrl1, mxsfb->base + LCDC_CTRL1);
+	writel(ctrl, mxsfb->base + LCDC_CTRL);
+
+	return 0;
+}
+
+static void mxsfb_set_bus_fmt(struct mxsfb_drm_private *mxsfb)
+{
+	struct drm_crtc *crtc = &mxsfb->pipe.crtc;
+	struct drm_device *drm = crtc->dev;
+	u32 bus_format = MEDIA_BUS_FMT_RGB888_1X24;
+	u32 reg;
+
+	reg = readl(mxsfb->base + LCDC_CTRL);
+
+	if (mxsfb->connector.display_info.num_bus_formats)
+		bus_format = mxsfb->connector.display_info.bus_formats[0];
+
+	reg &= ~CTRL_BUS_WIDTH_MASK;
+	switch (bus_format) {
+	case MEDIA_BUS_FMT_RGB565_1X16:
+		reg |= CTRL_SET_BUS_WIDTH(STMLCDIF_16BIT);
+		break;
+	case MEDIA_BUS_FMT_RGB666_1X18:
+		reg |= CTRL_SET_BUS_WIDTH(STMLCDIF_18BIT);
+		break;
+	case MEDIA_BUS_FMT_RGB888_1X24:
+		reg |= CTRL_SET_BUS_WIDTH(STMLCDIF_24BIT);
+		break;
+	default:
+		dev_err(drm->dev, "Unknown media bus format %d\n", bus_format);
+		break;
+	}
+	writel(reg, mxsfb->base + LCDC_CTRL);
+}
+
+static void mxsfb_enable_controller(struct mxsfb_drm_private *mxsfb)
+{
+	u32 reg;
+
+	if (mxsfb->clk_disp_axi)
+		clk_prepare_enable(mxsfb->clk_disp_axi);
+	clk_prepare_enable(mxsfb->clk);
+	mxsfb_enable_axi_clk(mxsfb);
+
+	/* If it was disabled, re-enable the mode again */
+	writel(CTRL_DOTCLK_MODE, mxsfb->base + LCDC_CTRL + REG_SET);
+
+	/* Enable the SYNC signals first, then the DMA engine */
+	reg = readl(mxsfb->base + LCDC_VDCTRL4);
+	reg |= VDCTRL4_SYNC_SIGNALS_ON;
+	writel(reg, mxsfb->base + LCDC_VDCTRL4);
+
+	writel(CTRL_RUN, mxsfb->base + LCDC_CTRL + REG_SET);
+}
+
+static void mxsfb_disable_controller(struct mxsfb_drm_private *mxsfb)
+{
+	u32 reg;
+
+	/*
+	 * Even if we disable the controller here, it will still continue
+	 * until its FIFOs are running out of data
+	 */
+	writel(CTRL_DOTCLK_MODE, mxsfb->base + LCDC_CTRL + REG_CLR);
+
+	readl_poll_timeout(mxsfb->base + LCDC_CTRL, reg, !(reg & CTRL_RUN),
+			   0, 1000);
+
+	reg = readl(mxsfb->base + LCDC_VDCTRL4);
+	reg &= ~VDCTRL4_SYNC_SIGNALS_ON;
+	writel(reg, mxsfb->base + LCDC_VDCTRL4);
+
+	mxsfb_disable_axi_clk(mxsfb);
+
+	clk_disable_unprepare(mxsfb->clk);
+	if (mxsfb->clk_disp_axi)
+		clk_disable_unprepare(mxsfb->clk_disp_axi);
+}
+
+/*
+ * Clear the bit and poll it cleared.  This is usually called with
+ * a reset address and mask being either SFTRST(bit 31) or CLKGATE
+ * (bit 30).
+ */
+static int clear_poll_bit(void __iomem *addr, u32 mask)
+{
+	u32 reg;
+
+	writel(mask, addr + MXS_CLR_ADDR);
+	return readl_poll_timeout(addr, reg, !(reg & mask), 0, RESET_TIMEOUT);
+}
+
+static int mxsfb_reset_block(void __iomem *reset_addr)
+{
+	int ret;
+
+	ret = clear_poll_bit(reset_addr, MODULE_SFTRST);
+	if (ret)
+		return ret;
+
+	writel(MODULE_CLKGATE, reset_addr + MXS_CLR_ADDR);
+
+	ret = clear_poll_bit(reset_addr, MODULE_SFTRST);
+	if (ret)
+		return ret;
+
+	return clear_poll_bit(reset_addr, MODULE_CLKGATE);
+}
+
+static void mxsfb_crtc_mode_set_nofb(struct mxsfb_drm_private *mxsfb)
+{
+	struct drm_display_mode *m = &mxsfb->pipe.crtc.state->adjusted_mode;
+	const u32 bus_flags = mxsfb->connector.display_info.bus_flags;
+	u32 vdctrl0, vsync_pulse_len, hsync_pulse_len;
+	int err;
+
+	/*
+	 * It seems, you can't re-program the controller if it is still
+	 * running. This may lead to shifted pictures (FIFO issue?), so
+	 * first stop the controller and drain its FIFOs.
+	 */
+	mxsfb_enable_axi_clk(mxsfb);
+
+	/* Mandatory eLCDIF reset as per the Reference Manual */
+	err = mxsfb_reset_block(mxsfb->base);
+	if (err)
+		return;
+
+	/* Clear the FIFOs */
+	writel(CTRL1_FIFO_CLEAR, mxsfb->base + LCDC_CTRL1 + REG_SET);
+
+	err = mxsfb_set_pixel_fmt(mxsfb);
+	if (err)
+		return;
+
+	clk_set_rate(mxsfb->clk, m->crtc_clock * 1000);
+
+	writel(TRANSFER_COUNT_SET_VCOUNT(m->crtc_vdisplay) |
+	       TRANSFER_COUNT_SET_HCOUNT(m->crtc_hdisplay),
+	       mxsfb->base + mxsfb->devdata->transfer_count);
+
+	vsync_pulse_len = m->crtc_vsync_end - m->crtc_vsync_start;
+
+	vdctrl0 = VDCTRL0_ENABLE_PRESENT |	/* Always in DOTCLOCK mode */
+		  VDCTRL0_VSYNC_PERIOD_UNIT |
+		  VDCTRL0_VSYNC_PULSE_WIDTH_UNIT |
+		  VDCTRL0_SET_VSYNC_PULSE_WIDTH(vsync_pulse_len);
+	if (m->flags & DRM_MODE_FLAG_PHSYNC)
+		vdctrl0 |= VDCTRL0_HSYNC_ACT_HIGH;
+	if (m->flags & DRM_MODE_FLAG_PVSYNC)
+		vdctrl0 |= VDCTRL0_VSYNC_ACT_HIGH;
+	/* Make sure Data Enable is high active by default */
+	if (!(bus_flags & DRM_BUS_FLAG_DE_LOW))
+		vdctrl0 |= VDCTRL0_ENABLE_ACT_HIGH;
+	/*
+	 * DRM_BUS_FLAG_PIXDATA_ defines are controller centric,
+	 * controllers VDCTRL0_DOTCLK is display centric.
+	 * Drive on positive edge       -> display samples on falling edge
+	 * DRM_BUS_FLAG_PIXDATA_POSEDGE -> VDCTRL0_DOTCLK_ACT_FALLING
+	 */
+	if (bus_flags & DRM_BUS_FLAG_PIXDATA_POSEDGE)
+		vdctrl0 |= VDCTRL0_DOTCLK_ACT_FALLING;
+
+	writel(vdctrl0, mxsfb->base + LCDC_VDCTRL0);
+
+	mxsfb_set_bus_fmt(mxsfb);
+
+	/* Frame length in lines. */
+	writel(m->crtc_vtotal, mxsfb->base + LCDC_VDCTRL1);
+
+	/* Line length in units of clocks or pixels. */
+	hsync_pulse_len = m->crtc_hsync_end - m->crtc_hsync_start;
+	writel(set_hsync_pulse_width(mxsfb, hsync_pulse_len) |
+	       VDCTRL2_SET_HSYNC_PERIOD(m->crtc_htotal),
+	       mxsfb->base + LCDC_VDCTRL2);
+
+	writel(SET_HOR_WAIT_CNT(m->crtc_htotal - m->crtc_hsync_start) |
+	       SET_VERT_WAIT_CNT(m->crtc_vtotal - m->crtc_vsync_start),
+	       mxsfb->base + LCDC_VDCTRL3);
+
+	writel(SET_DOTCLK_H_VALID_DATA_CNT(m->hdisplay),
+	       mxsfb->base + LCDC_VDCTRL4);
+
+	mxsfb_disable_axi_clk(mxsfb);
+}
+
+void mxsfb_crtc_enable(struct mxsfb_drm_private *mxsfb)
+{
+	mxsfb_crtc_mode_set_nofb(mxsfb);
+	mxsfb_enable_controller(mxsfb);
+}
+
+void mxsfb_crtc_disable(struct mxsfb_drm_private *mxsfb)
+{
+	mxsfb_disable_controller(mxsfb);
+}
+
+void mxsfb_plane_atomic_update(struct mxsfb_drm_private *mxsfb,
+			       struct drm_plane_state *state)
+{
+	struct drm_simple_display_pipe *pipe = &mxsfb->pipe;
+	struct drm_crtc *crtc = &pipe->crtc;
+	struct drm_framebuffer *fb = pipe->plane.state->fb;
+	struct drm_pending_vblank_event *event;
+	struct drm_gem_cma_object *gem;
+
+	if (!crtc)
+		return;
+
+	spin_lock_irq(&crtc->dev->event_lock);
+	event = crtc->state->event;
+	if (event) {
+		crtc->state->event = NULL;
+
+		if (drm_crtc_vblank_get(crtc) == 0) {
+			drm_crtc_arm_vblank_event(crtc, event);
+		} else {
+			drm_crtc_send_vblank_event(crtc, event);
+		}
+	}
+	spin_unlock_irq(&crtc->dev->event_lock);
+
+	if (!fb)
+		return;
+
+	gem = drm_fb_cma_get_gem_obj(fb, 0);
+
+	mxsfb_enable_axi_clk(mxsfb);
+	writel(gem->paddr, mxsfb->base + mxsfb->devdata->next_buf);
+	mxsfb_disable_axi_clk(mxsfb);
+}