Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 417 insertions, 0 deletions

diff --git a/drivers/hwmon/adm1029.c b/drivers/hwmon/adm1029.c
new file mode 100644
index 000000000..8c5cdb560
--- /dev/null
+++ b/drivers/hwmon/adm1029.c
@@ -0,0 +1,417 @@
+/*
+ * adm1029.c - Part of lm_sensors, Linux kernel modules for hardware monitoring
+ *
+ * Copyright (C) 2006 Corentin LABBE <clabbe.montjoie@gmail.com>
+ *
+ * Based on LM83 Driver by Jean Delvare <jdelvare@suse.de>
+ *
+ * Give only processor, motherboard temperatures and fan tachs
+ * Very rare chip please let me know if you use it
+ *
+ * http://www.analog.com/UploadedFiles/Data_Sheets/ADM1029.pdf
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/hwmon.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+
+/*
+ * Addresses to scan
+ */
+
+static const unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d,
+						0x2e, 0x2f, I2C_CLIENT_END
+};
+
+/*
+ * The ADM1029 registers
+ * Manufacturer ID is 0x41 for Analog Devices
+ */
+
+#define ADM1029_REG_MAN_ID			0x0D
+#define ADM1029_REG_CHIP_ID			0x0E
+#define ADM1029_REG_CONFIG			0x01
+#define ADM1029_REG_NB_FAN_SUPPORT		0x02
+
+#define ADM1029_REG_TEMP_DEVICES_INSTALLED	0x06
+
+#define ADM1029_REG_LOCAL_TEMP			0xA0
+#define ADM1029_REG_REMOTE1_TEMP		0xA1
+#define ADM1029_REG_REMOTE2_TEMP		0xA2
+
+#define ADM1029_REG_LOCAL_TEMP_HIGH		0x90
+#define ADM1029_REG_REMOTE1_TEMP_HIGH		0x91
+#define ADM1029_REG_REMOTE2_TEMP_HIGH		0x92
+
+#define ADM1029_REG_LOCAL_TEMP_LOW		0x98
+#define ADM1029_REG_REMOTE1_TEMP_LOW		0x99
+#define ADM1029_REG_REMOTE2_TEMP_LOW		0x9A
+
+#define ADM1029_REG_FAN1			0x70
+#define ADM1029_REG_FAN2			0x71
+
+#define ADM1029_REG_FAN1_MIN			0x78
+#define ADM1029_REG_FAN2_MIN			0x79
+
+#define ADM1029_REG_FAN1_CONFIG			0x68
+#define ADM1029_REG_FAN2_CONFIG			0x69
+
+#define TEMP_FROM_REG(val)	((val) * 1000)
+
+#define DIV_FROM_REG(val)	(1 << (((val) >> 6) - 1))
+
+/* Registers to be checked by adm1029_update_device() */
+static const u8 ADM1029_REG_TEMP[] = {
+	ADM1029_REG_LOCAL_TEMP,
+	ADM1029_REG_REMOTE1_TEMP,
+	ADM1029_REG_REMOTE2_TEMP,
+	ADM1029_REG_LOCAL_TEMP_HIGH,
+	ADM1029_REG_REMOTE1_TEMP_HIGH,
+	ADM1029_REG_REMOTE2_TEMP_HIGH,
+	ADM1029_REG_LOCAL_TEMP_LOW,
+	ADM1029_REG_REMOTE1_TEMP_LOW,
+	ADM1029_REG_REMOTE2_TEMP_LOW,
+};
+
+static const u8 ADM1029_REG_FAN[] = {
+	ADM1029_REG_FAN1,
+	ADM1029_REG_FAN2,
+	ADM1029_REG_FAN1_MIN,
+	ADM1029_REG_FAN2_MIN,
+};
+
+static const u8 ADM1029_REG_FAN_DIV[] = {
+	ADM1029_REG_FAN1_CONFIG,
+	ADM1029_REG_FAN2_CONFIG,
+};
+
+/*
+ * Client data (each client gets its own)
+ */
+
+struct adm1029_data {
+	struct i2c_client *client;
+	struct mutex update_lock;
+	char valid;		/* zero until following fields are valid */
+	unsigned long last_updated;	/* in jiffies */
+
+	/* registers values, signed for temperature, unsigned for other stuff */
+	s8 temp[ARRAY_SIZE(ADM1029_REG_TEMP)];
+	u8 fan[ARRAY_SIZE(ADM1029_REG_FAN)];
+	u8 fan_div[ARRAY_SIZE(ADM1029_REG_FAN_DIV)];
+};
+
+/*
+ * function that update the status of the chips (temperature for example)
+ */
+static struct adm1029_data *adm1029_update_device(struct device *dev)
+{
+	struct adm1029_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
+
+	mutex_lock(&data->update_lock);
+	/*
+	 * Use the "cache" Luke, don't recheck values
+	 * if there are already checked not a long time later
+	 */
+	if (time_after(jiffies, data->last_updated + HZ * 2)
+	 || !data->valid) {
+		int nr;
+
+		dev_dbg(&client->dev, "Updating adm1029 data\n");
+
+		for (nr = 0; nr < ARRAY_SIZE(ADM1029_REG_TEMP); nr++) {
+			data->temp[nr] =
+			    i2c_smbus_read_byte_data(client,
+						     ADM1029_REG_TEMP[nr]);
+		}
+		for (nr = 0; nr < ARRAY_SIZE(ADM1029_REG_FAN); nr++) {
+			data->fan[nr] =
+			    i2c_smbus_read_byte_data(client,
+						     ADM1029_REG_FAN[nr]);
+		}
+		for (nr = 0; nr < ARRAY_SIZE(ADM1029_REG_FAN_DIV); nr++) {
+			data->fan_div[nr] =
+			    i2c_smbus_read_byte_data(client,
+						     ADM1029_REG_FAN_DIV[nr]);
+		}
+
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	mutex_unlock(&data->update_lock);
+
+	return data;
+}
+
+/*
+ * Sysfs stuff
+ */
+
+static ssize_t
+show_temp(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct adm1029_data *data = adm1029_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[attr->index]));
+}
+
+static ssize_t
+show_fan(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct adm1029_data *data = adm1029_update_device(dev);
+	u16 val;
+	if (data->fan[attr->index] == 0
+	    || (data->fan_div[attr->index] & 0xC0) == 0
+	    || data->fan[attr->index] == 255) {
+		return sprintf(buf, "0\n");
+	}
+
+	val = 1880 * 120 / DIV_FROM_REG(data->fan_div[attr->index])
+	    / data->fan[attr->index];
+	return sprintf(buf, "%d\n", val);
+}
+
+static ssize_t
+show_fan_div(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct adm1029_data *data = adm1029_update_device(dev);
+	if ((data->fan_div[attr->index] & 0xC0) == 0)
+		return sprintf(buf, "0\n");
+	return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[attr->index]));
+}
+
+static ssize_t set_fan_div(struct device *dev,
+	    struct device_attribute *devattr, const char *buf, size_t count)
+{
+	struct adm1029_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	u8 reg;
+	long val;
+	int ret = kstrtol(buf, 10, &val);
+	if (ret < 0)
+		return ret;
+
+	mutex_lock(&data->update_lock);
+
+	/*Read actual config */
+	reg = i2c_smbus_read_byte_data(client,
+				       ADM1029_REG_FAN_DIV[attr->index]);
+
+	switch (val) {
+	case 1:
+		val = 1;
+		break;
+	case 2:
+		val = 2;
+		break;
+	case 4:
+		val = 3;
+		break;
+	default:
+		mutex_unlock(&data->update_lock);
+		dev_err(&client->dev,
+			"fan_div value %ld not supported. Choose one of 1, 2 or 4!\n",
+			val);
+		return -EINVAL;
+	}
+	/* Update the value */
+	reg = (reg & 0x3F) | (val << 6);
+
+	/* Update the cache */
+	data->fan_div[attr->index] = reg;
+
+	/* Write value */
+	i2c_smbus_write_byte_data(client,
+				  ADM1029_REG_FAN_DIV[attr->index], reg);
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+/*
+ * Access rights on sysfs. S_IRUGO: Is Readable by User, Group and Others
+ *			   S_IWUSR: Is Writable by User.
+ */
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2);
+
+static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, show_temp, NULL, 3);
+static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO, show_temp, NULL, 4);
+static SENSOR_DEVICE_ATTR(temp3_max, S_IRUGO, show_temp, NULL, 5);
+
+static SENSOR_DEVICE_ATTR(temp1_min, S_IRUGO, show_temp, NULL, 6);
+static SENSOR_DEVICE_ATTR(temp2_min, S_IRUGO, show_temp, NULL, 7);
+static SENSOR_DEVICE_ATTR(temp3_min, S_IRUGO, show_temp, NULL, 8);
+
+static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0);
+static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1);
+
+static SENSOR_DEVICE_ATTR(fan1_min, S_IRUGO, show_fan, NULL, 2);
+static SENSOR_DEVICE_ATTR(fan2_min, S_IRUGO, show_fan, NULL, 3);
+
+static SENSOR_DEVICE_ATTR(fan1_div, S_IRUGO | S_IWUSR,
+			  show_fan_div, set_fan_div, 0);
+static SENSOR_DEVICE_ATTR(fan2_div, S_IRUGO | S_IWUSR,
+			  show_fan_div, set_fan_div, 1);
+
+static struct attribute *adm1029_attrs[] = {
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_temp1_min.dev_attr.attr,
+	&sensor_dev_attr_temp1_max.dev_attr.attr,
+	&sensor_dev_attr_temp2_input.dev_attr.attr,
+	&sensor_dev_attr_temp2_min.dev_attr.attr,
+	&sensor_dev_attr_temp2_max.dev_attr.attr,
+	&sensor_dev_attr_temp3_input.dev_attr.attr,
+	&sensor_dev_attr_temp3_min.dev_attr.attr,
+	&sensor_dev_attr_temp3_max.dev_attr.attr,
+	&sensor_dev_attr_fan1_input.dev_attr.attr,
+	&sensor_dev_attr_fan2_input.dev_attr.attr,
+	&sensor_dev_attr_fan1_min.dev_attr.attr,
+	&sensor_dev_attr_fan2_min.dev_attr.attr,
+	&sensor_dev_attr_fan1_div.dev_attr.attr,
+	&sensor_dev_attr_fan2_div.dev_attr.attr,
+	NULL
+};
+
+ATTRIBUTE_GROUPS(adm1029);
+
+/*
+ * Real code
+ */
+
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int adm1029_detect(struct i2c_client *client,
+			  struct i2c_board_info *info)
+{
+	struct i2c_adapter *adapter = client->adapter;
+	u8 man_id, chip_id, temp_devices_installed, nb_fan_support;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -ENODEV;
+
+	/*
+	 * ADM1029 doesn't have CHIP ID, check just MAN ID
+	 * For better detection we check also ADM1029_TEMP_DEVICES_INSTALLED,
+	 * ADM1029_REG_NB_FAN_SUPPORT and compare it with possible values
+	 * documented
+	 */
+
+	man_id = i2c_smbus_read_byte_data(client, ADM1029_REG_MAN_ID);
+	chip_id = i2c_smbus_read_byte_data(client, ADM1029_REG_CHIP_ID);
+	temp_devices_installed = i2c_smbus_read_byte_data(client,
+					ADM1029_REG_TEMP_DEVICES_INSTALLED);
+	nb_fan_support = i2c_smbus_read_byte_data(client,
+						ADM1029_REG_NB_FAN_SUPPORT);
+	/* 0x41 is Analog Devices */
+	if (man_id != 0x41 || (temp_devices_installed & 0xf9) != 0x01
+	    || nb_fan_support != 0x03)
+		return -ENODEV;
+
+	if ((chip_id & 0xF0) != 0x00) {
+		/*
+		 * There are no "official" CHIP ID, so actually
+		 * we use Major/Minor revision for that
+		 */
+		pr_info("Unknown major revision %x, please let us know\n",
+			chip_id);
+		return -ENODEV;
+	}
+
+	strlcpy(info->type, "adm1029", I2C_NAME_SIZE);
+
+	return 0;
+}
+
+static int adm1029_init_client(struct i2c_client *client)
+{
+	u8 config;
+
+	config = i2c_smbus_read_byte_data(client, ADM1029_REG_CONFIG);
+	if ((config & 0x10) == 0) {
+		i2c_smbus_write_byte_data(client, ADM1029_REG_CONFIG,
+					  config | 0x10);
+	}
+	/* recheck config */
+	config = i2c_smbus_read_byte_data(client, ADM1029_REG_CONFIG);
+	if ((config & 0x10) == 0) {
+		dev_err(&client->dev, "Initialization failed!\n");
+		return 0;
+	}
+	return 1;
+}
+
+static int adm1029_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct adm1029_data *data;
+	struct device *hwmon_dev;
+
+	data = devm_kzalloc(dev, sizeof(struct adm1029_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->client = client;
+	mutex_init(&data->update_lock);
+
+	/*
+	 * Initialize the ADM1029 chip
+	 * Check config register
+	 */
+	if (adm1029_init_client(client) == 0)
+		return -ENODEV;
+
+	hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
+							   data,
+							   adm1029_groups);
+	return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+static const struct i2c_device_id adm1029_id[] = {
+	{ "adm1029", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, adm1029_id);
+
+static struct i2c_driver adm1029_driver = {
+	.class		= I2C_CLASS_HWMON,
+	.driver = {
+		.name = "adm1029",
+	},
+	.probe		= adm1029_probe,
+	.id_table	= adm1029_id,
+	.detect		= adm1029_detect,
+	.address_list	= normal_i2c,
+};
+
+module_i2c_driver(adm1029_driver);
+
+MODULE_AUTHOR("Corentin LABBE <clabbe.montjoie@gmail.com>");
+MODULE_DESCRIPTION("adm1029 driver");
+MODULE_LICENSE("GPL v2");