Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 845 insertions, 0 deletions

diff --git a/drivers/hwmon/stts751.c b/drivers/hwmon/stts751.c
new file mode 100644
index 000000000..7fe152d92
--- /dev/null
+++ b/drivers/hwmon/stts751.c
@@ -0,0 +1,845 @@
+/*
+ * STTS751 sensor driver
+ *
+ * Copyright (C) 2016-2017 Istituto Italiano di Tecnologia - RBCS - EDL
+ * Robotics, Brain and Cognitive Sciences department
+ * Electronic Design Laboratory
+ *
+ * Written by Andrea Merello <andrea.merello@gmail.com>
+ *
+ * Based on  LM95241 driver and LM90 driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/bitops.h>
+#include <linux/err.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/property.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/util_macros.h>
+
+#define DEVNAME "stts751"
+
+static const unsigned short normal_i2c[] = {
+	0x48, 0x49, 0x38, 0x39,  /* STTS751-0 */
+	0x4A, 0x4B, 0x3A, 0x3B,  /* STTS751-1 */
+	I2C_CLIENT_END };
+
+#define STTS751_REG_TEMP_H	0x00
+#define STTS751_REG_STATUS	0x01
+#define STTS751_STATUS_TRIPT	BIT(0)
+#define STTS751_STATUS_TRIPL	BIT(5)
+#define STTS751_STATUS_TRIPH	BIT(6)
+#define STTS751_REG_TEMP_L	0x02
+#define STTS751_REG_CONF	0x03
+#define STTS751_CONF_RES_MASK	0x0C
+#define STTS751_CONF_RES_SHIFT  2
+#define STTS751_CONF_EVENT_DIS  BIT(7)
+#define STTS751_CONF_STOP	BIT(6)
+#define STTS751_REG_RATE	0x04
+#define STTS751_REG_HLIM_H	0x05
+#define STTS751_REG_HLIM_L	0x06
+#define STTS751_REG_LLIM_H	0x07
+#define STTS751_REG_LLIM_L	0x08
+#define STTS751_REG_TLIM	0x20
+#define STTS751_REG_HYST	0x21
+#define STTS751_REG_SMBUS_TO	0x22
+
+#define STTS751_REG_PROD_ID	0xFD
+#define STTS751_REG_MAN_ID	0xFE
+#define STTS751_REG_REV_ID	0xFF
+
+#define STTS751_0_PROD_ID	0x00
+#define STTS751_1_PROD_ID	0x01
+#define ST_MAN_ID		0x53
+
+/*
+ * Possible update intervals are (in mS):
+ * 16000, 8000, 4000, 2000, 1000, 500, 250, 125, 62.5, 31.25
+ * However we are not going to complicate things too much and we stick to the
+ * approx value in mS.
+ */
+static const int stts751_intervals[] = {
+	16000, 8000, 4000, 2000, 1000, 500, 250, 125, 63, 31
+};
+
+static const struct i2c_device_id stts751_id[] = {
+	{ "stts751", 0 },
+	{ }
+};
+
+static const struct of_device_id stts751_of_match[] = {
+	{ .compatible = "stts751" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, stts751_of_match);
+
+struct stts751_priv {
+	struct device *dev;
+	struct i2c_client *client;
+	struct mutex access_lock;
+	u8 interval;
+	int res;
+	int event_max, event_min;
+	int therm;
+	int hyst;
+	bool smbus_timeout;
+	int temp;
+	unsigned long last_update, last_alert_update;
+	u8 config;
+	bool min_alert, max_alert, therm_trip;
+	bool data_valid, alert_valid;
+	bool notify_max, notify_min;
+};
+
+/*
+ * These functions converts temperature from HW format to integer format and
+ * vice-vers. They are (mostly) taken from lm90 driver. Unit is in mC.
+ */
+static int stts751_to_deg(s16 hw_val)
+{
+	return hw_val * 125 / 32;
+}
+
+static s32 stts751_to_hw(int val)
+{
+	return DIV_ROUND_CLOSEST(val, 125) * 32;
+}
+
+static int stts751_adjust_resolution(struct stts751_priv *priv)
+{
+	u8 res;
+
+	switch (priv->interval) {
+	case 9:
+		/* 10 bits */
+		res = 0;
+		break;
+	case 8:
+		/* 11 bits */
+		res = 1;
+		break;
+	default:
+		/* 12 bits */
+		res = 3;
+		break;
+	}
+
+	if (priv->res == res)
+		return 0;
+
+	priv->config &= ~STTS751_CONF_RES_MASK;
+	priv->config |= res << STTS751_CONF_RES_SHIFT;
+	dev_dbg(&priv->client->dev, "setting res %d. config %x",
+		res, priv->config);
+	priv->res = res;
+
+	return i2c_smbus_write_byte_data(priv->client,
+				STTS751_REG_CONF, priv->config);
+}
+
+static int stts751_update_temp(struct stts751_priv *priv)
+{
+	s32 integer1, integer2, frac;
+
+	/*
+	 * There is a trick here, like in the lm90 driver. We have to read two
+	 * registers to get the sensor temperature, but we have to beware a
+	 * conversion could occur between the readings. We could use the
+	 * one-shot conversion register, but we don't want to do this (disables
+	 * hardware monitoring). So the solution used here is to read the high
+	 * byte once, then the low byte, then the high byte again. If the new
+	 * high byte matches the old one, then we have a valid reading. Else we
+	 * have to read the low byte again, and now we believe we have a correct
+	 * reading.
+	 */
+	integer1 = i2c_smbus_read_byte_data(priv->client, STTS751_REG_TEMP_H);
+	if (integer1 < 0) {
+		dev_dbg(&priv->client->dev,
+			"I2C read failed (temp H). ret: %x\n", integer1);
+		return integer1;
+	}
+
+	frac = i2c_smbus_read_byte_data(priv->client, STTS751_REG_TEMP_L);
+	if (frac < 0) {
+		dev_dbg(&priv->client->dev,
+			"I2C read failed (temp L). ret: %x\n", frac);
+		return frac;
+	}
+
+	integer2 = i2c_smbus_read_byte_data(priv->client, STTS751_REG_TEMP_H);
+	if (integer2 < 0) {
+		dev_dbg(&priv->client->dev,
+			"I2C 2nd read failed (temp H). ret: %x\n", integer2);
+		return integer2;
+	}
+
+	if (integer1 != integer2) {
+		frac = i2c_smbus_read_byte_data(priv->client,
+						STTS751_REG_TEMP_L);
+		if (frac < 0) {
+			dev_dbg(&priv->client->dev,
+				"I2C 2nd read failed (temp L). ret: %x\n",
+				frac);
+			return frac;
+		}
+	}
+
+	priv->temp = stts751_to_deg((integer1 << 8) | frac);
+	return 0;
+}
+
+static int stts751_set_temp_reg16(struct stts751_priv *priv, int temp,
+				  u8 hreg, u8 lreg)
+{
+	s32 hwval;
+	int ret;
+
+	hwval = stts751_to_hw(temp);
+
+	ret = i2c_smbus_write_byte_data(priv->client, hreg, hwval >> 8);
+	if (ret)
+		return ret;
+
+	return i2c_smbus_write_byte_data(priv->client, lreg, hwval & 0xff);
+}
+
+static int stts751_set_temp_reg8(struct stts751_priv *priv, int temp, u8 reg)
+{
+	s32 hwval;
+
+	hwval = stts751_to_hw(temp);
+	return i2c_smbus_write_byte_data(priv->client, reg, hwval >> 8);
+}
+
+static int stts751_read_reg16(struct stts751_priv *priv, int *temp,
+			      u8 hreg, u8 lreg)
+{
+	int integer, frac;
+
+	integer = i2c_smbus_read_byte_data(priv->client, hreg);
+	if (integer < 0)
+		return integer;
+
+	frac = i2c_smbus_read_byte_data(priv->client, lreg);
+	if (frac < 0)
+		return frac;
+
+	*temp = stts751_to_deg((integer << 8) | frac);
+
+	return 0;
+}
+
+static int stts751_read_reg8(struct stts751_priv *priv, int *temp, u8 reg)
+{
+	int integer;
+
+	integer = i2c_smbus_read_byte_data(priv->client, reg);
+	if (integer < 0)
+		return integer;
+
+	*temp = stts751_to_deg(integer << 8);
+
+	return 0;
+}
+
+/*
+ * Update alert flags without waiting for cache to expire. We detects alerts
+ * immediately for the sake of the alert handler; we still need to deal with
+ * caching to workaround the fact that alarm flags int the status register,
+ * despite what the datasheet claims, gets always cleared on read.
+ */
+static int stts751_update_alert(struct stts751_priv *priv)
+{
+	int ret;
+	bool conv_done;
+	int cache_time = msecs_to_jiffies(stts751_intervals[priv->interval]);
+
+	/*
+	 * Add another 10% because if we run faster than the HW conversion
+	 * rate we will end up in reporting incorrectly alarms.
+	 */
+	cache_time += cache_time / 10;
+
+	ret = i2c_smbus_read_byte_data(priv->client, STTS751_REG_STATUS);
+	if (ret < 0)
+		return ret;
+
+	dev_dbg(&priv->client->dev, "status reg %x\n", ret);
+	conv_done = ret & (STTS751_STATUS_TRIPH | STTS751_STATUS_TRIPL);
+	/*
+	 * Reset the cache if the cache time expired, or if we are sure
+	 * we have valid data from a device conversion, or if we know
+	 * our cache has been never written.
+	 *
+	 * Note that when the cache has been never written the point is
+	 * to correctly initialize the timestamp, rather than clearing
+	 * the cache values.
+	 *
+	 * Note that updating the cache timestamp when we get an alarm flag
+	 * is required, otherwise we could incorrectly report alarms to be zero.
+	 */
+	if (time_after(jiffies,	priv->last_alert_update + cache_time) ||
+	    conv_done || !priv->alert_valid) {
+		priv->max_alert = false;
+		priv->min_alert = false;
+		priv->alert_valid = true;
+		priv->last_alert_update = jiffies;
+		dev_dbg(&priv->client->dev, "invalidating alert cache\n");
+	}
+
+	priv->max_alert |= !!(ret & STTS751_STATUS_TRIPH);
+	priv->min_alert |= !!(ret & STTS751_STATUS_TRIPL);
+	priv->therm_trip = !!(ret & STTS751_STATUS_TRIPT);
+
+	dev_dbg(&priv->client->dev, "max_alert: %d, min_alert: %d, therm_trip: %d\n",
+		priv->max_alert, priv->min_alert, priv->therm_trip);
+
+	return 0;
+}
+
+static void stts751_alert(struct i2c_client *client,
+			  enum i2c_alert_protocol type, unsigned int data)
+{
+	int ret;
+	struct stts751_priv *priv = i2c_get_clientdata(client);
+
+	if (type != I2C_PROTOCOL_SMBUS_ALERT)
+		return;
+
+	dev_dbg(&client->dev, "alert!");
+
+	mutex_lock(&priv->access_lock);
+	ret = stts751_update_alert(priv);
+	if (ret < 0) {
+		/* default to worst case */
+		priv->max_alert = true;
+		priv->min_alert = true;
+
+		dev_warn(priv->dev,
+			 "Alert received, but can't communicate to the device. Triggering all alarms!");
+	}
+
+	if (priv->max_alert) {
+		if (priv->notify_max)
+			dev_notice(priv->dev, "got alert for HIGH temperature");
+		priv->notify_max = false;
+
+		/* unblock alert poll */
+		sysfs_notify(&priv->dev->kobj, NULL, "temp1_max_alarm");
+	}
+
+	if (priv->min_alert) {
+		if (priv->notify_min)
+			dev_notice(priv->dev, "got alert for LOW temperature");
+		priv->notify_min = false;
+
+		/* unblock alert poll */
+		sysfs_notify(&priv->dev->kobj, NULL, "temp1_min_alarm");
+	}
+
+	if (priv->min_alert || priv->max_alert)
+		kobject_uevent(&priv->dev->kobj, KOBJ_CHANGE);
+
+	mutex_unlock(&priv->access_lock);
+}
+
+static int stts751_update(struct stts751_priv *priv)
+{
+	int ret;
+	int cache_time = msecs_to_jiffies(stts751_intervals[priv->interval]);
+
+	if (time_after(jiffies,	priv->last_update + cache_time) ||
+	    !priv->data_valid) {
+		ret = stts751_update_temp(priv);
+		if (ret)
+			return ret;
+
+		ret = stts751_update_alert(priv);
+		if (ret)
+			return ret;
+		priv->data_valid = true;
+		priv->last_update = jiffies;
+	}
+
+	return 0;
+}
+
+static ssize_t show_max_alarm(struct device *dev, struct device_attribute *attr,
+			      char *buf)
+{
+	int ret;
+	struct stts751_priv *priv = dev_get_drvdata(dev);
+
+	mutex_lock(&priv->access_lock);
+	ret = stts751_update(priv);
+	if (!ret)
+		priv->notify_max = true;
+	mutex_unlock(&priv->access_lock);
+	if (ret < 0)
+		return ret;
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", priv->max_alert);
+}
+
+static ssize_t show_min_alarm(struct device *dev, struct device_attribute *attr,
+			      char *buf)
+{
+	int ret;
+	struct stts751_priv *priv = dev_get_drvdata(dev);
+
+	mutex_lock(&priv->access_lock);
+	ret = stts751_update(priv);
+	if (!ret)
+		priv->notify_min = true;
+	mutex_unlock(&priv->access_lock);
+	if (ret < 0)
+		return ret;
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", priv->min_alert);
+}
+
+static ssize_t show_input(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	int ret;
+	struct stts751_priv *priv = dev_get_drvdata(dev);
+
+	mutex_lock(&priv->access_lock);
+	ret = stts751_update(priv);
+	mutex_unlock(&priv->access_lock);
+	if (ret < 0)
+		return ret;
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", priv->temp);
+}
+
+static ssize_t show_therm(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	struct stts751_priv *priv = dev_get_drvdata(dev);
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", priv->therm);
+}
+
+static ssize_t set_therm(struct device *dev, struct device_attribute *attr,
+			 const char *buf, size_t count)
+{
+	int ret;
+	long temp;
+	struct stts751_priv *priv = dev_get_drvdata(dev);
+
+	if (kstrtol(buf, 10, &temp) < 0)
+		return -EINVAL;
+
+	/* HW works in range -64C to +127.937C */
+	temp = clamp_val(temp, -64000, 127937);
+	mutex_lock(&priv->access_lock);
+	ret = stts751_set_temp_reg8(priv, temp, STTS751_REG_TLIM);
+	if (ret)
+		goto exit;
+
+	dev_dbg(&priv->client->dev, "setting therm %ld", temp);
+
+	/*
+	 * hysteresis reg is relative to therm, so the HW does not need to be
+	 * adjusted, we need to update our local copy only.
+	 */
+	priv->hyst = temp - (priv->therm - priv->hyst);
+	priv->therm = temp;
+
+exit:
+	mutex_unlock(&priv->access_lock);
+	if (ret)
+		return ret;
+
+	return count;
+}
+
+static ssize_t show_hyst(struct device *dev, struct device_attribute *attr,
+			 char *buf)
+{
+	struct stts751_priv *priv = dev_get_drvdata(dev);
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", priv->hyst);
+}
+
+static ssize_t set_hyst(struct device *dev, struct device_attribute *attr,
+			const char *buf, size_t count)
+{
+	int ret;
+	long temp;
+
+	struct stts751_priv *priv = dev_get_drvdata(dev);
+
+	if (kstrtol(buf, 10, &temp) < 0)
+		return -EINVAL;
+
+	mutex_lock(&priv->access_lock);
+	/* HW works in range -64C to +127.937C */
+	temp = clamp_val(temp, -64000, priv->therm);
+	priv->hyst = temp;
+	dev_dbg(&priv->client->dev, "setting hyst %ld", temp);
+	temp = priv->therm - temp;
+	ret = stts751_set_temp_reg8(priv, temp, STTS751_REG_HYST);
+	mutex_unlock(&priv->access_lock);
+	if (ret)
+		return ret;
+
+	return count;
+}
+
+static ssize_t show_therm_trip(struct device *dev,
+			       struct device_attribute *attr, char *buf)
+{
+	int ret;
+	struct stts751_priv *priv = dev_get_drvdata(dev);
+
+	mutex_lock(&priv->access_lock);
+	ret = stts751_update(priv);
+	mutex_unlock(&priv->access_lock);
+	if (ret < 0)
+		return ret;
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", priv->therm_trip);
+}
+
+static ssize_t show_max(struct device *dev, struct device_attribute *attr,
+			char *buf)
+{
+	struct stts751_priv *priv = dev_get_drvdata(dev);
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", priv->event_max);
+}
+
+static ssize_t set_max(struct device *dev, struct device_attribute *attr,
+		       const char *buf, size_t count)
+{
+	int ret;
+	long temp;
+	struct stts751_priv *priv = dev_get_drvdata(dev);
+
+	if (kstrtol(buf, 10, &temp) < 0)
+		return -EINVAL;
+
+	mutex_lock(&priv->access_lock);
+	/* HW works in range -64C to +127.937C */
+	temp = clamp_val(temp, priv->event_min, 127937);
+	ret = stts751_set_temp_reg16(priv, temp,
+				     STTS751_REG_HLIM_H, STTS751_REG_HLIM_L);
+	if (ret)
+		goto exit;
+
+	dev_dbg(&priv->client->dev, "setting event max %ld", temp);
+	priv->event_max = temp;
+	ret = count;
+exit:
+	mutex_unlock(&priv->access_lock);
+	return ret;
+}
+
+static ssize_t show_min(struct device *dev, struct device_attribute *attr,
+			char *buf)
+{
+	struct stts751_priv *priv = dev_get_drvdata(dev);
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", priv->event_min);
+}
+
+static ssize_t set_min(struct device *dev, struct device_attribute *attr,
+		       const char *buf, size_t count)
+{
+	int ret;
+	long temp;
+	struct stts751_priv *priv = dev_get_drvdata(dev);
+
+	if (kstrtol(buf, 10, &temp) < 0)
+		return -EINVAL;
+
+	mutex_lock(&priv->access_lock);
+	/* HW works in range -64C to +127.937C */
+	temp = clamp_val(temp, -64000, priv->event_max);
+	ret = stts751_set_temp_reg16(priv, temp,
+				     STTS751_REG_LLIM_H, STTS751_REG_LLIM_L);
+	if (ret)
+		goto exit;
+
+	dev_dbg(&priv->client->dev, "setting event min %ld", temp);
+	priv->event_min = temp;
+	ret = count;
+exit:
+	mutex_unlock(&priv->access_lock);
+	return ret;
+}
+
+static ssize_t show_interval(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	struct stts751_priv *priv = dev_get_drvdata(dev);
+
+	return snprintf(buf, PAGE_SIZE, "%d\n",
+			stts751_intervals[priv->interval]);
+}
+
+static ssize_t set_interval(struct device *dev, struct device_attribute *attr,
+			    const char *buf, size_t count)
+{
+	unsigned long val;
+	int idx;
+	int ret = count;
+	struct stts751_priv *priv = dev_get_drvdata(dev);
+
+	if (kstrtoul(buf, 10, &val) < 0)
+		return -EINVAL;
+
+	idx = find_closest_descending(val, stts751_intervals,
+				      ARRAY_SIZE(stts751_intervals));
+
+	dev_dbg(&priv->client->dev, "setting interval. req:%lu, idx: %d, val: %d",
+		val, idx, stts751_intervals[idx]);
+
+	mutex_lock(&priv->access_lock);
+	if (priv->interval == idx)
+		goto exit;
+
+	/*
+	 * In early development stages I've become suspicious about the chip
+	 * starting to misbehave if I ever set, even briefly, an invalid
+	 * configuration. While I'm not sure this is really needed, be
+	 * conservative and set rate/resolution in such an order that avoids
+	 * passing through an invalid configuration.
+	 */
+
+	/* speed up: lower the resolution, then modify convrate */
+	if (priv->interval < idx) {
+		dev_dbg(&priv->client->dev, "lower resolution, then modify convrate");
+		priv->interval = idx;
+		ret = stts751_adjust_resolution(priv);
+		if (ret)
+			goto exit;
+	}
+
+	ret = i2c_smbus_write_byte_data(priv->client, STTS751_REG_RATE, idx);
+	if (ret)
+		goto exit;
+	/* slow down: modify convrate, then raise resolution */
+	if (priv->interval != idx) {
+		dev_dbg(&priv->client->dev, "modify convrate, then raise resolution");
+		priv->interval = idx;
+		ret = stts751_adjust_resolution(priv);
+		if (ret)
+			goto exit;
+	}
+	ret = count;
+exit:
+	mutex_unlock(&priv->access_lock);
+
+	return ret;
+}
+
+static int stts751_detect(struct i2c_client *new_client,
+			  struct i2c_board_info *info)
+{
+	struct i2c_adapter *adapter = new_client->adapter;
+	const char *name;
+	int tmp;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -ENODEV;
+
+	tmp = i2c_smbus_read_byte_data(new_client, STTS751_REG_MAN_ID);
+	if (tmp != ST_MAN_ID)
+		return -ENODEV;
+
+	/* lower temperaure registers always have bits 0-3 set to zero */
+	tmp = i2c_smbus_read_byte_data(new_client, STTS751_REG_TEMP_L);
+	if (tmp & 0xf)
+		return -ENODEV;
+
+	tmp = i2c_smbus_read_byte_data(new_client, STTS751_REG_HLIM_L);
+	if (tmp & 0xf)
+		return -ENODEV;
+
+	tmp = i2c_smbus_read_byte_data(new_client, STTS751_REG_LLIM_L);
+	if (tmp & 0xf)
+		return -ENODEV;
+
+	/* smbus timeout register always have bits 0-7 set to zero */
+	tmp = i2c_smbus_read_byte_data(new_client, STTS751_REG_SMBUS_TO);
+	if (tmp & 0x7f)
+		return -ENODEV;
+
+	tmp = i2c_smbus_read_byte_data(new_client, STTS751_REG_PROD_ID);
+
+	switch (tmp) {
+	case STTS751_0_PROD_ID:
+		name = "STTS751-0";
+		break;
+	case STTS751_1_PROD_ID:
+		name = "STTS751-1";
+		break;
+	default:
+		return -ENODEV;
+	}
+	dev_dbg(&new_client->dev, "Chip %s detected", name);
+
+	strlcpy(info->type, stts751_id[0].name, I2C_NAME_SIZE);
+	return 0;
+}
+
+static int stts751_read_chip_config(struct stts751_priv *priv)
+{
+	int ret;
+	int tmp;
+
+	ret = i2c_smbus_read_byte_data(priv->client, STTS751_REG_CONF);
+	if (ret < 0)
+		return ret;
+	priv->config = ret;
+	priv->res = (ret & STTS751_CONF_RES_MASK) >> STTS751_CONF_RES_SHIFT;
+
+	ret = i2c_smbus_read_byte_data(priv->client, STTS751_REG_RATE);
+	if (ret < 0)
+		return ret;
+	if (ret >= ARRAY_SIZE(stts751_intervals)) {
+		dev_err(priv->dev, "Unrecognized conversion rate 0x%x\n", ret);
+		return -ENODEV;
+	}
+	priv->interval = ret;
+
+	ret = stts751_read_reg16(priv, &priv->event_max,
+				 STTS751_REG_HLIM_H, STTS751_REG_HLIM_L);
+	if (ret)
+		return ret;
+
+	ret = stts751_read_reg16(priv, &priv->event_min,
+				 STTS751_REG_LLIM_H, STTS751_REG_LLIM_L);
+	if (ret)
+		return ret;
+
+	ret = stts751_read_reg8(priv, &priv->therm, STTS751_REG_TLIM);
+	if (ret)
+		return ret;
+
+	ret = stts751_read_reg8(priv, &tmp, STTS751_REG_HYST);
+	if (ret)
+		return ret;
+	priv->hyst = priv->therm - tmp;
+
+	return 0;
+}
+
+static SENSOR_DEVICE_ATTR(temp1_input, 0444, show_input, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp1_min, 0644, show_min, set_min, 0);
+static SENSOR_DEVICE_ATTR(temp1_max, 0644, show_max, set_max, 0);
+static SENSOR_DEVICE_ATTR(temp1_min_alarm, 0444, show_min_alarm, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp1_max_alarm, 0444, show_max_alarm, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp1_crit, 0644, show_therm,	set_therm, 0);
+static SENSOR_DEVICE_ATTR(temp1_crit_hyst, 0644, show_hyst, set_hyst, 0);
+static SENSOR_DEVICE_ATTR(temp1_crit_alarm, 0444, show_therm_trip, NULL, 0);
+static SENSOR_DEVICE_ATTR(update_interval, 0644,
+			  show_interval, set_interval, 0);
+
+static struct attribute *stts751_attrs[] = {
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_temp1_min.dev_attr.attr,
+	&sensor_dev_attr_temp1_max.dev_attr.attr,
+	&sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp1_crit.dev_attr.attr,
+	&sensor_dev_attr_temp1_crit_hyst.dev_attr.attr,
+	&sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
+	&sensor_dev_attr_update_interval.dev_attr.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(stts751);
+
+static int stts751_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct stts751_priv *priv;
+	int ret;
+	bool smbus_nto;
+	int rev_id;
+
+	priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->client = client;
+	priv->notify_max = true;
+	priv->notify_min = true;
+	i2c_set_clientdata(client, priv);
+	mutex_init(&priv->access_lock);
+
+	if (device_property_present(&client->dev,
+				    "smbus-timeout-disable")) {
+		smbus_nto = device_property_read_bool(&client->dev,
+						      "smbus-timeout-disable");
+
+		ret = i2c_smbus_write_byte_data(client,	STTS751_REG_SMBUS_TO,
+						smbus_nto ? 0 : 0x80);
+		if (ret)
+			return ret;
+	}
+
+	rev_id = i2c_smbus_read_byte_data(client, STTS751_REG_REV_ID);
+	if (rev_id < 0)
+		return -ENODEV;
+	if (rev_id != 0x1) {
+		dev_dbg(&client->dev, "Chip revision 0x%x is untested\n",
+			rev_id);
+	}
+
+	ret = stts751_read_chip_config(priv);
+	if (ret)
+		return ret;
+
+	priv->config &= ~(STTS751_CONF_STOP | STTS751_CONF_EVENT_DIS);
+	ret = i2c_smbus_write_byte_data(client,	STTS751_REG_CONF, priv->config);
+	if (ret)
+		return ret;
+
+	priv->dev = devm_hwmon_device_register_with_groups(&client->dev,
+							client->name, priv,
+							stts751_groups);
+	return PTR_ERR_OR_ZERO(priv->dev);
+}
+
+MODULE_DEVICE_TABLE(i2c, stts751_id);
+
+static struct i2c_driver stts751_driver = {
+	.class		= I2C_CLASS_HWMON,
+	.driver = {
+		.name	= DEVNAME,
+		.of_match_table = of_match_ptr(stts751_of_match),
+	},
+	.probe		= stts751_probe,
+	.id_table	= stts751_id,
+	.detect		= stts751_detect,
+	.alert		= stts751_alert,
+	.address_list	= normal_i2c,
+};
+
+module_i2c_driver(stts751_driver);
+
+MODULE_AUTHOR("Andrea Merello <andrea.merello@gmail.com>");
+MODULE_DESCRIPTION("STTS751 sensor driver");
+MODULE_LICENSE("GPL");