Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 204 insertions, 0 deletions

diff --git a/drivers/hwspinlock/omap_hwspinlock.c b/drivers/hwspinlock/omap_hwspinlock.c
new file mode 100644
index 000000000..625844e0a
--- /dev/null
+++ b/drivers/hwspinlock/omap_hwspinlock.c
@@ -0,0 +1,204 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * OMAP hardware spinlock driver
+ *
+ * Copyright (C) 2010-2015 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Contact: Simon Que <sque@ti.com>
+ *          Hari Kanigeri <h-kanigeri2@ti.com>
+ *          Ohad Ben-Cohen <ohad@wizery.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/bitops.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/hwspinlock.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#include "hwspinlock_internal.h"
+
+/* Spinlock register offsets */
+#define SYSSTATUS_OFFSET		0x0014
+#define LOCK_BASE_OFFSET		0x0800
+
+#define SPINLOCK_NUMLOCKS_BIT_OFFSET	(24)
+
+/* Possible values of SPINLOCK_LOCK_REG */
+#define SPINLOCK_NOTTAKEN		(0)	/* free */
+#define SPINLOCK_TAKEN			(1)	/* locked */
+
+static int omap_hwspinlock_trylock(struct hwspinlock *lock)
+{
+	void __iomem *lock_addr = lock->priv;
+
+	/* attempt to acquire the lock by reading its value */
+	return (SPINLOCK_NOTTAKEN == readl(lock_addr));
+}
+
+static void omap_hwspinlock_unlock(struct hwspinlock *lock)
+{
+	void __iomem *lock_addr = lock->priv;
+
+	/* release the lock by writing 0 to it */
+	writel(SPINLOCK_NOTTAKEN, lock_addr);
+}
+
+/*
+ * relax the OMAP interconnect while spinning on it.
+ *
+ * The specs recommended that the retry delay time will be
+ * just over half of the time that a requester would be
+ * expected to hold the lock.
+ *
+ * The number below is taken from an hardware specs example,
+ * obviously it is somewhat arbitrary.
+ */
+static void omap_hwspinlock_relax(struct hwspinlock *lock)
+{
+	ndelay(50);
+}
+
+static const struct hwspinlock_ops omap_hwspinlock_ops = {
+	.trylock = omap_hwspinlock_trylock,
+	.unlock = omap_hwspinlock_unlock,
+	.relax = omap_hwspinlock_relax,
+};
+
+static int omap_hwspinlock_probe(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct hwspinlock_device *bank;
+	struct hwspinlock *hwlock;
+	struct resource *res;
+	void __iomem *io_base;
+	int num_locks, i, ret;
+	/* Only a single hwspinlock block device is supported */
+	int base_id = 0;
+
+	if (!node)
+		return -ENODEV;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+
+	io_base = ioremap(res->start, resource_size(res));
+	if (!io_base)
+		return -ENOMEM;
+
+	/*
+	 * make sure the module is enabled and clocked before reading
+	 * the module SYSSTATUS register
+	 */
+	pm_runtime_enable(&pdev->dev);
+	ret = pm_runtime_get_sync(&pdev->dev);
+	if (ret < 0) {
+		pm_runtime_put_noidle(&pdev->dev);
+		goto iounmap_base;
+	}
+
+	/* Determine number of locks */
+	i = readl(io_base + SYSSTATUS_OFFSET);
+	i >>= SPINLOCK_NUMLOCKS_BIT_OFFSET;
+
+	/*
+	 * runtime PM will make sure the clock of this module is
+	 * enabled again iff at least one lock is requested
+	 */
+	ret = pm_runtime_put(&pdev->dev);
+	if (ret < 0)
+		goto iounmap_base;
+
+	/* one of the four lsb's must be set, and nothing else */
+	if (hweight_long(i & 0xf) != 1 || i > 8) {
+		ret = -EINVAL;
+		goto iounmap_base;
+	}
+
+	num_locks = i * 32; /* actual number of locks in this device */
+
+	bank = kzalloc(struct_size(bank, lock, num_locks), GFP_KERNEL);
+	if (!bank) {
+		ret = -ENOMEM;
+		goto iounmap_base;
+	}
+
+	platform_set_drvdata(pdev, bank);
+
+	for (i = 0, hwlock = &bank->lock[0]; i < num_locks; i++, hwlock++)
+		hwlock->priv = io_base + LOCK_BASE_OFFSET + sizeof(u32) * i;
+
+	ret = hwspin_lock_register(bank, &pdev->dev, &omap_hwspinlock_ops,
+						base_id, num_locks);
+	if (ret)
+		goto reg_fail;
+
+	return 0;
+
+reg_fail:
+	kfree(bank);
+iounmap_base:
+	pm_runtime_disable(&pdev->dev);
+	iounmap(io_base);
+	return ret;
+}
+
+static int omap_hwspinlock_remove(struct platform_device *pdev)
+{
+	struct hwspinlock_device *bank = platform_get_drvdata(pdev);
+	void __iomem *io_base = bank->lock[0].priv - LOCK_BASE_OFFSET;
+	int ret;
+
+	ret = hwspin_lock_unregister(bank);
+	if (ret) {
+		dev_err(&pdev->dev, "%s failed: %d\n", __func__, ret);
+		return ret;
+	}
+
+	pm_runtime_disable(&pdev->dev);
+	iounmap(io_base);
+	kfree(bank);
+
+	return 0;
+}
+
+static const struct of_device_id omap_hwspinlock_of_match[] = {
+	{ .compatible = "ti,omap4-hwspinlock", },
+	{ /* end */ },
+};
+MODULE_DEVICE_TABLE(of, omap_hwspinlock_of_match);
+
+static struct platform_driver omap_hwspinlock_driver = {
+	.probe		= omap_hwspinlock_probe,
+	.remove		= omap_hwspinlock_remove,
+	.driver		= {
+		.name	= "omap_hwspinlock",
+		.of_match_table = of_match_ptr(omap_hwspinlock_of_match),
+	},
+};
+
+static int __init omap_hwspinlock_init(void)
+{
+	return platform_driver_register(&omap_hwspinlock_driver);
+}
+/* board init code might need to reserve hwspinlocks for predefined purposes */
+postcore_initcall(omap_hwspinlock_init);
+
+static void __exit omap_hwspinlock_exit(void)
+{
+	platform_driver_unregister(&omap_hwspinlock_driver);
+}
+module_exit(omap_hwspinlock_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Hardware spinlock driver for OMAP");
+MODULE_AUTHOR("Simon Que <sque@ti.com>");
+MODULE_AUTHOR("Hari Kanigeri <h-kanigeri2@ti.com>");
+MODULE_AUTHOR("Ohad Ben-Cohen <ohad@wizery.com>");