Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 347 insertions, 0 deletions

diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
new file mode 100644
index 000000000..4e6b3fb01
--- /dev/null
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -0,0 +1,347 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Synopsys DesignWare I2C adapter driver (master only).
+ *
+ * Based on the TI DAVINCI I2C adapter driver.
+ *
+ * Copyright (C) 2006 Texas Instruments.
+ * Copyright (C) 2007 MontaVista Software Inc.
+ * Copyright (C) 2009 Provigent Ltd.
+ * Copyright (C) 2011, 2015, 2016 Intel Corporation.
+ */
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/pm_runtime.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+
+#include "i2c-designware-core.h"
+
+#define DRIVER_NAME "i2c-designware-pci"
+
+enum dw_pci_ctl_id_t {
+	medfield,
+	merrifield,
+	baytrail,
+	cherrytrail,
+	haswell,
+};
+
+struct dw_scl_sda_cfg {
+	u16 ss_hcnt;
+	u16 fs_hcnt;
+	u16 ss_lcnt;
+	u16 fs_lcnt;
+	u32 sda_hold;
+};
+
+struct dw_pci_controller {
+	u32 bus_num;
+	u32 bus_cfg;
+	u32 tx_fifo_depth;
+	u32 rx_fifo_depth;
+	u32 clk_khz;
+	u32 functionality;
+	u32 flags;
+	struct dw_scl_sda_cfg *scl_sda_cfg;
+	int (*setup)(struct pci_dev *pdev, struct dw_pci_controller *c);
+};
+
+#define INTEL_MID_STD_CFG  (DW_IC_CON_MASTER |			\
+				DW_IC_CON_SLAVE_DISABLE |	\
+				DW_IC_CON_RESTART_EN)
+
+/* Merrifield HCNT/LCNT/SDA hold time */
+static struct dw_scl_sda_cfg mrfld_config = {
+	.ss_hcnt = 0x2f8,
+	.fs_hcnt = 0x87,
+	.ss_lcnt = 0x37b,
+	.fs_lcnt = 0x10a,
+};
+
+/* BayTrail HCNT/LCNT/SDA hold time */
+static struct dw_scl_sda_cfg byt_config = {
+	.ss_hcnt = 0x200,
+	.fs_hcnt = 0x55,
+	.ss_lcnt = 0x200,
+	.fs_lcnt = 0x99,
+	.sda_hold = 0x6,
+};
+
+/* Haswell HCNT/LCNT/SDA hold time */
+static struct dw_scl_sda_cfg hsw_config = {
+	.ss_hcnt = 0x01b0,
+	.fs_hcnt = 0x48,
+	.ss_lcnt = 0x01fb,
+	.fs_lcnt = 0xa0,
+	.sda_hold = 0x9,
+};
+
+static int mfld_setup(struct pci_dev *pdev, struct dw_pci_controller *c)
+{
+	switch (pdev->device) {
+	case 0x0817:
+		c->bus_cfg &= ~DW_IC_CON_SPEED_MASK;
+		c->bus_cfg |= DW_IC_CON_SPEED_STD;
+		/* fall through */
+	case 0x0818:
+	case 0x0819:
+		c->bus_num = pdev->device - 0x817 + 3;
+		return 0;
+	case 0x082C:
+	case 0x082D:
+	case 0x082E:
+		c->bus_num = pdev->device - 0x82C + 0;
+		return 0;
+	}
+	return -ENODEV;
+}
+
+static int mrfld_setup(struct pci_dev *pdev, struct dw_pci_controller *c)
+{
+	/*
+	 * On Intel Merrifield the user visible i2c busses are enumerated
+	 * [1..7]. So, we add 1 to shift the default range. Besides that the
+	 * first PCI slot provides 4 functions, that's why we have to add 0 to
+	 * the first slot and 4 to the next one.
+	 */
+	switch (PCI_SLOT(pdev->devfn)) {
+	case 8:
+		c->bus_num = PCI_FUNC(pdev->devfn) + 0 + 1;
+		return 0;
+	case 9:
+		c->bus_num = PCI_FUNC(pdev->devfn) + 4 + 1;
+		return 0;
+	}
+	return -ENODEV;
+}
+
+static struct dw_pci_controller dw_pci_controllers[] = {
+	[medfield] = {
+		.bus_num = -1,
+		.bus_cfg   = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
+		.tx_fifo_depth = 32,
+		.rx_fifo_depth = 32,
+		.functionality = I2C_FUNC_10BIT_ADDR,
+		.clk_khz      = 25000,
+		.setup = mfld_setup,
+	},
+	[merrifield] = {
+		.bus_num = -1,
+		.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
+		.tx_fifo_depth = 64,
+		.rx_fifo_depth = 64,
+		.functionality = I2C_FUNC_10BIT_ADDR,
+		.scl_sda_cfg = &mrfld_config,
+		.setup = mrfld_setup,
+	},
+	[baytrail] = {
+		.bus_num = -1,
+		.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
+		.tx_fifo_depth = 32,
+		.rx_fifo_depth = 32,
+		.functionality = I2C_FUNC_10BIT_ADDR,
+		.scl_sda_cfg = &byt_config,
+	},
+	[haswell] = {
+		.bus_num = -1,
+		.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
+		.tx_fifo_depth = 32,
+		.rx_fifo_depth = 32,
+		.functionality = I2C_FUNC_10BIT_ADDR,
+		.scl_sda_cfg = &hsw_config,
+	},
+	[cherrytrail] = {
+		.bus_num = -1,
+		.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
+		.tx_fifo_depth = 32,
+		.rx_fifo_depth = 32,
+		.functionality = I2C_FUNC_10BIT_ADDR,
+		.flags = MODEL_CHERRYTRAIL,
+		.scl_sda_cfg = &byt_config,
+	},
+};
+
+#ifdef CONFIG_PM
+static int i2c_dw_pci_suspend(struct device *dev)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct dw_i2c_dev *i_dev = pci_get_drvdata(pdev);
+
+	i_dev->disable(i_dev);
+
+	return 0;
+}
+
+static int i2c_dw_pci_resume(struct device *dev)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct dw_i2c_dev *i_dev = pci_get_drvdata(pdev);
+
+	return i_dev->init(i_dev);
+}
+#endif
+
+static UNIVERSAL_DEV_PM_OPS(i2c_dw_pm_ops, i2c_dw_pci_suspend,
+			    i2c_dw_pci_resume, NULL);
+
+static u32 i2c_dw_get_clk_rate_khz(struct dw_i2c_dev *dev)
+{
+	return dev->controller->clk_khz;
+}
+
+static int i2c_dw_pci_probe(struct pci_dev *pdev,
+			    const struct pci_device_id *id)
+{
+	struct dw_i2c_dev *dev;
+	struct i2c_adapter *adap;
+	int r;
+	struct dw_pci_controller *controller;
+	struct dw_scl_sda_cfg *cfg;
+
+	if (id->driver_data >= ARRAY_SIZE(dw_pci_controllers)) {
+		dev_err(&pdev->dev, "%s: invalid driver data %ld\n", __func__,
+			id->driver_data);
+		return -EINVAL;
+	}
+
+	controller = &dw_pci_controllers[id->driver_data];
+
+	r = pcim_enable_device(pdev);
+	if (r) {
+		dev_err(&pdev->dev, "Failed to enable I2C PCI device (%d)\n",
+			r);
+		return r;
+	}
+
+	r = pcim_iomap_regions(pdev, 1 << 0, pci_name(pdev));
+	if (r) {
+		dev_err(&pdev->dev, "I/O memory remapping failed\n");
+		return r;
+	}
+
+	dev = devm_kzalloc(&pdev->dev, sizeof(struct dw_i2c_dev), GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
+
+	dev->clk = NULL;
+	dev->controller = controller;
+	dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz;
+	dev->base = pcim_iomap_table(pdev)[0];
+	dev->dev = &pdev->dev;
+	dev->irq = pdev->irq;
+	dev->flags |= controller->flags;
+
+	if (controller->setup) {
+		r = controller->setup(pdev, controller);
+		if (r)
+			return r;
+	}
+
+	dev->functionality = controller->functionality |
+				DW_IC_DEFAULT_FUNCTIONALITY;
+
+	dev->master_cfg = controller->bus_cfg;
+	if (controller->scl_sda_cfg) {
+		cfg = controller->scl_sda_cfg;
+		dev->ss_hcnt = cfg->ss_hcnt;
+		dev->fs_hcnt = cfg->fs_hcnt;
+		dev->ss_lcnt = cfg->ss_lcnt;
+		dev->fs_lcnt = cfg->fs_lcnt;
+		dev->sda_hold_time = cfg->sda_hold;
+	}
+
+	pci_set_drvdata(pdev, dev);
+
+	dev->tx_fifo_depth = controller->tx_fifo_depth;
+	dev->rx_fifo_depth = controller->rx_fifo_depth;
+
+	adap = &dev->adapter;
+	adap->owner = THIS_MODULE;
+	adap->class = 0;
+	ACPI_COMPANION_SET(&adap->dev, ACPI_COMPANION(&pdev->dev));
+	adap->nr = controller->bus_num;
+
+	r = i2c_dw_probe(dev);
+	if (r)
+		return r;
+
+	pm_runtime_set_autosuspend_delay(&pdev->dev, 1000);
+	pm_runtime_use_autosuspend(&pdev->dev);
+	pm_runtime_put_autosuspend(&pdev->dev);
+	pm_runtime_allow(&pdev->dev);
+
+	return 0;
+}
+
+static void i2c_dw_pci_remove(struct pci_dev *pdev)
+{
+	struct dw_i2c_dev *dev = pci_get_drvdata(pdev);
+
+	dev->disable(dev);
+	pm_runtime_forbid(&pdev->dev);
+	pm_runtime_get_noresume(&pdev->dev);
+
+	i2c_del_adapter(&dev->adapter);
+}
+
+/* work with hotplug and coldplug */
+MODULE_ALIAS("i2c_designware-pci");
+
+static const struct pci_device_id i2_designware_pci_ids[] = {
+	/* Medfield */
+	{ PCI_VDEVICE(INTEL, 0x0817), medfield },
+	{ PCI_VDEVICE(INTEL, 0x0818), medfield },
+	{ PCI_VDEVICE(INTEL, 0x0819), medfield },
+	{ PCI_VDEVICE(INTEL, 0x082C), medfield },
+	{ PCI_VDEVICE(INTEL, 0x082D), medfield },
+	{ PCI_VDEVICE(INTEL, 0x082E), medfield },
+	/* Merrifield */
+	{ PCI_VDEVICE(INTEL, 0x1195), merrifield },
+	{ PCI_VDEVICE(INTEL, 0x1196), merrifield },
+	/* Baytrail */
+	{ PCI_VDEVICE(INTEL, 0x0F41), baytrail },
+	{ PCI_VDEVICE(INTEL, 0x0F42), baytrail },
+	{ PCI_VDEVICE(INTEL, 0x0F43), baytrail },
+	{ PCI_VDEVICE(INTEL, 0x0F44), baytrail },
+	{ PCI_VDEVICE(INTEL, 0x0F45), baytrail },
+	{ PCI_VDEVICE(INTEL, 0x0F46), baytrail },
+	{ PCI_VDEVICE(INTEL, 0x0F47), baytrail },
+	/* Haswell */
+	{ PCI_VDEVICE(INTEL, 0x9c61), haswell },
+	{ PCI_VDEVICE(INTEL, 0x9c62), haswell },
+	/* Braswell / Cherrytrail */
+	{ PCI_VDEVICE(INTEL, 0x22C1), cherrytrail },
+	{ PCI_VDEVICE(INTEL, 0x22C2), cherrytrail },
+	{ PCI_VDEVICE(INTEL, 0x22C3), cherrytrail },
+	{ PCI_VDEVICE(INTEL, 0x22C4), cherrytrail },
+	{ PCI_VDEVICE(INTEL, 0x22C5), cherrytrail },
+	{ PCI_VDEVICE(INTEL, 0x22C6), cherrytrail },
+	{ PCI_VDEVICE(INTEL, 0x22C7), cherrytrail },
+	{ 0,}
+};
+MODULE_DEVICE_TABLE(pci, i2_designware_pci_ids);
+
+static struct pci_driver dw_i2c_driver = {
+	.name		= DRIVER_NAME,
+	.id_table	= i2_designware_pci_ids,
+	.probe		= i2c_dw_pci_probe,
+	.remove		= i2c_dw_pci_remove,
+	.driver         = {
+		.pm     = &i2c_dw_pm_ops,
+	},
+};
+
+module_pci_driver(dw_i2c_driver);
+
+MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
+MODULE_DESCRIPTION("Synopsys DesignWare PCI I2C bus adapter");
+MODULE_LICENSE("GPL");