Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 551 insertions, 0 deletions

diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
new file mode 100644
index 000000000..6f344654e
--- /dev/null
+++ b/drivers/ide/ide-dma.c
@@ -0,0 +1,551 @@
+/*
+ *  IDE DMA support (including IDE PCI BM-DMA).
+ *
+ *  Copyright (C) 1995-1998   Mark Lord
+ *  Copyright (C) 1999-2000   Andre Hedrick <andre@linux-ide.org>
+ *  Copyright (C) 2004, 2007  Bartlomiej Zolnierkiewicz
+ *
+ *  May be copied or modified under the terms of the GNU General Public License
+ *
+ *  DMA is supported for all IDE devices (disk drives, cdroms, tapes, floppies).
+ */
+
+/*
+ *  Special Thanks to Mark for his Six years of work.
+ */
+
+/*
+ * Thanks to "Christopher J. Reimer" <reimer@doe.carleton.ca> for
+ * fixing the problem with the BIOS on some Acer motherboards.
+ *
+ * Thanks to "Benoit Poulot-Cazajous" <poulot@chorus.fr> for testing
+ * "TX" chipset compatibility and for providing patches for the "TX" chipset.
+ *
+ * Thanks to Christian Brunner <chb@muc.de> for taking a good first crack
+ * at generic DMA -- his patches were referred to when preparing this code.
+ *
+ * Most importantly, thanks to Robert Bringman <rob@mars.trion.com>
+ * for supplying a Promise UDMA board & WD UDMA drive for this work!
+ */
+
+#include <linux/types.h>
+#include <linux/gfp.h>
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/ide.h>
+#include <linux/scatterlist.h>
+#include <linux/dma-mapping.h>
+
+static const struct drive_list_entry drive_whitelist[] = {
+	{ "Micropolis 2112A"	,       NULL		},
+	{ "CONNER CTMA 4000"	,       NULL		},
+	{ "CONNER CTT8000-A"	,       NULL		},
+	{ "ST34342A"		,	NULL		},
+	{ NULL			,	NULL		}
+};
+
+static const struct drive_list_entry drive_blacklist[] = {
+	{ "WDC AC11000H"	,	NULL 		},
+	{ "WDC AC22100H"	,	NULL 		},
+	{ "WDC AC32500H"	,	NULL 		},
+	{ "WDC AC33100H"	,	NULL 		},
+	{ "WDC AC31600H"	,	NULL 		},
+	{ "WDC AC32100H"	,	"24.09P07"	},
+	{ "WDC AC23200L"	,	"21.10N21"	},
+	{ "Compaq CRD-8241B"	,	NULL 		},
+	{ "CRD-8400B"		,	NULL 		},
+	{ "CRD-8480B",			NULL 		},
+	{ "CRD-8482B",			NULL 		},
+	{ "CRD-84"		,	NULL 		},
+	{ "SanDisk SDP3B"	,	NULL 		},
+	{ "SanDisk SDP3B-64"	,	NULL 		},
+	{ "SANYO CD-ROM CRD"	,	NULL 		},
+	{ "HITACHI CDR-8"	,	NULL 		},
+	{ "HITACHI CDR-8335"	,	NULL 		},
+	{ "HITACHI CDR-8435"	,	NULL 		},
+	{ "Toshiba CD-ROM XM-6202B"	,	NULL 		},
+	{ "TOSHIBA CD-ROM XM-1702BC",	NULL 		},
+	{ "CD-532E-A"		,	NULL 		},
+	{ "E-IDE CD-ROM CR-840",	NULL 		},
+	{ "CD-ROM Drive/F5A",	NULL 		},
+	{ "WPI CDD-820",		NULL 		},
+	{ "SAMSUNG CD-ROM SC-148C",	NULL 		},
+	{ "SAMSUNG CD-ROM SC",	NULL 		},
+	{ "ATAPI CD-ROM DRIVE 40X MAXIMUM",	NULL 		},
+	{ "_NEC DV5800A",               NULL            },
+	{ "SAMSUNG CD-ROM SN-124",	"N001" },
+	{ "Seagate STT20000A",		NULL  },
+	{ "CD-ROM CDR_U200",		"1.09" },
+	{ NULL			,	NULL		}
+
+};
+
+/**
+ *	ide_dma_intr	-	IDE DMA interrupt handler
+ *	@drive: the drive the interrupt is for
+ *
+ *	Handle an interrupt completing a read/write DMA transfer on an
+ *	IDE device
+ */
+
+ide_startstop_t ide_dma_intr(ide_drive_t *drive)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	struct ide_cmd *cmd = &hwif->cmd;
+	u8 stat = 0, dma_stat = 0;
+
+	drive->waiting_for_dma = 0;
+	dma_stat = hwif->dma_ops->dma_end(drive);
+	ide_dma_unmap_sg(drive, cmd);
+	stat = hwif->tp_ops->read_status(hwif);
+
+	if (OK_STAT(stat, DRIVE_READY, drive->bad_wstat | ATA_DRQ)) {
+		if (!dma_stat) {
+			if ((cmd->tf_flags & IDE_TFLAG_FS) == 0)
+				ide_finish_cmd(drive, cmd, stat);
+			else
+				ide_complete_rq(drive, BLK_STS_OK,
+						blk_rq_sectors(cmd->rq) << 9);
+			return ide_stopped;
+		}
+		printk(KERN_ERR "%s: %s: bad DMA status (0x%02x)\n",
+			drive->name, __func__, dma_stat);
+	}
+	return ide_error(drive, "dma_intr", stat);
+}
+
+int ide_dma_good_drive(ide_drive_t *drive)
+{
+	return ide_in_drive_list(drive->id, drive_whitelist);
+}
+
+/**
+ *	ide_dma_map_sg	-	map IDE scatter gather for DMA I/O
+ *	@drive: the drive to map the DMA table for
+ *	@cmd: command
+ *
+ *	Perform the DMA mapping magic necessary to access the source or
+ *	target buffers of a request via DMA.  The lower layers of the
+ *	kernel provide the necessary cache management so that we can
+ *	operate in a portable fashion.
+ */
+
+static int ide_dma_map_sg(ide_drive_t *drive, struct ide_cmd *cmd)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	struct scatterlist *sg = hwif->sg_table;
+	int i;
+
+	if (cmd->tf_flags & IDE_TFLAG_WRITE)
+		cmd->sg_dma_direction = DMA_TO_DEVICE;
+	else
+		cmd->sg_dma_direction = DMA_FROM_DEVICE;
+
+	i = dma_map_sg(hwif->dev, sg, cmd->sg_nents, cmd->sg_dma_direction);
+	if (i) {
+		cmd->orig_sg_nents = cmd->sg_nents;
+		cmd->sg_nents = i;
+	}
+
+	return i;
+}
+
+/**
+ *	ide_dma_unmap_sg	-	clean up DMA mapping
+ *	@drive: The drive to unmap
+ *
+ *	Teardown mappings after DMA has completed. This must be called
+ *	after the completion of each use of ide_build_dmatable and before
+ *	the next use of ide_build_dmatable. Failure to do so will cause
+ *	an oops as only one mapping can be live for each target at a given
+ *	time.
+ */
+
+void ide_dma_unmap_sg(ide_drive_t *drive, struct ide_cmd *cmd)
+{
+	ide_hwif_t *hwif = drive->hwif;
+
+	dma_unmap_sg(hwif->dev, hwif->sg_table, cmd->orig_sg_nents,
+		     cmd->sg_dma_direction);
+}
+EXPORT_SYMBOL_GPL(ide_dma_unmap_sg);
+
+/**
+ *	ide_dma_off_quietly	-	Generic DMA kill
+ *	@drive: drive to control
+ *
+ *	Turn off the current DMA on this IDE controller.
+ */
+
+void ide_dma_off_quietly(ide_drive_t *drive)
+{
+	drive->dev_flags &= ~IDE_DFLAG_USING_DMA;
+
+	drive->hwif->dma_ops->dma_host_set(drive, 0);
+}
+EXPORT_SYMBOL(ide_dma_off_quietly);
+
+/**
+ *	ide_dma_off	-	disable DMA on a device
+ *	@drive: drive to disable DMA on
+ *
+ *	Disable IDE DMA for a device on this IDE controller.
+ *	Inform the user that DMA has been disabled.
+ */
+
+void ide_dma_off(ide_drive_t *drive)
+{
+	printk(KERN_INFO "%s: DMA disabled\n", drive->name);
+	ide_dma_off_quietly(drive);
+}
+EXPORT_SYMBOL(ide_dma_off);
+
+/**
+ *	ide_dma_on		-	Enable DMA on a device
+ *	@drive: drive to enable DMA on
+ *
+ *	Enable IDE DMA for a device on this IDE controller.
+ */
+
+void ide_dma_on(ide_drive_t *drive)
+{
+	drive->dev_flags |= IDE_DFLAG_USING_DMA;
+
+	drive->hwif->dma_ops->dma_host_set(drive, 1);
+}
+
+int __ide_dma_bad_drive(ide_drive_t *drive)
+{
+	u16 *id = drive->id;
+
+	int blacklist = ide_in_drive_list(id, drive_blacklist);
+	if (blacklist) {
+		printk(KERN_WARNING "%s: Disabling (U)DMA for %s (blacklisted)\n",
+				    drive->name, (char *)&id[ATA_ID_PROD]);
+		return blacklist;
+	}
+	return 0;
+}
+EXPORT_SYMBOL(__ide_dma_bad_drive);
+
+static const u8 xfer_mode_bases[] = {
+	XFER_UDMA_0,
+	XFER_MW_DMA_0,
+	XFER_SW_DMA_0,
+};
+
+static unsigned int ide_get_mode_mask(ide_drive_t *drive, u8 base, u8 req_mode)
+{
+	u16 *id = drive->id;
+	ide_hwif_t *hwif = drive->hwif;
+	const struct ide_port_ops *port_ops = hwif->port_ops;
+	unsigned int mask = 0;
+
+	switch (base) {
+	case XFER_UDMA_0:
+		if ((id[ATA_ID_FIELD_VALID] & 4) == 0)
+			break;
+		mask = id[ATA_ID_UDMA_MODES];
+		if (port_ops && port_ops->udma_filter)
+			mask &= port_ops->udma_filter(drive);
+		else
+			mask &= hwif->ultra_mask;
+
+		/*
+		 * avoid false cable warning from eighty_ninty_three()
+		 */
+		if (req_mode > XFER_UDMA_2) {
+			if ((mask & 0x78) && (eighty_ninty_three(drive) == 0))
+				mask &= 0x07;
+		}
+		break;
+	case XFER_MW_DMA_0:
+		mask = id[ATA_ID_MWDMA_MODES];
+
+		/* Also look for the CF specific MWDMA modes... */
+		if (ata_id_is_cfa(id) && (id[ATA_ID_CFA_MODES] & 0x38)) {
+			u8 mode = ((id[ATA_ID_CFA_MODES] & 0x38) >> 3) - 1;
+
+			mask |= ((2 << mode) - 1) << 3;
+		}
+
+		if (port_ops && port_ops->mdma_filter)
+			mask &= port_ops->mdma_filter(drive);
+		else
+			mask &= hwif->mwdma_mask;
+		break;
+	case XFER_SW_DMA_0:
+		mask = id[ATA_ID_SWDMA_MODES];
+		if (!(mask & ATA_SWDMA2) && (id[ATA_ID_OLD_DMA_MODES] >> 8)) {
+			u8 mode = id[ATA_ID_OLD_DMA_MODES] >> 8;
+
+			/*
+			 * if the mode is valid convert it to the mask
+			 * (the maximum allowed mode is XFER_SW_DMA_2)
+			 */
+			if (mode <= 2)
+				mask = (2 << mode) - 1;
+		}
+		mask &= hwif->swdma_mask;
+		break;
+	default:
+		BUG();
+		break;
+	}
+
+	return mask;
+}
+
+/**
+ *	ide_find_dma_mode	-	compute DMA speed
+ *	@drive: IDE device
+ *	@req_mode: requested mode
+ *
+ *	Checks the drive/host capabilities and finds the speed to use for
+ *	the DMA transfer.  The speed is then limited by the requested mode.
+ *
+ *	Returns 0 if the drive/host combination is incapable of DMA transfers
+ *	or if the requested mode is not a DMA mode.
+ */
+
+u8 ide_find_dma_mode(ide_drive_t *drive, u8 req_mode)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	unsigned int mask;
+	int x, i;
+	u8 mode = 0;
+
+	if (drive->media != ide_disk) {
+		if (hwif->host_flags & IDE_HFLAG_NO_ATAPI_DMA)
+			return 0;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(xfer_mode_bases); i++) {
+		if (req_mode < xfer_mode_bases[i])
+			continue;
+		mask = ide_get_mode_mask(drive, xfer_mode_bases[i], req_mode);
+		x = fls(mask) - 1;
+		if (x >= 0) {
+			mode = xfer_mode_bases[i] + x;
+			break;
+		}
+	}
+
+	if (hwif->chipset == ide_acorn && mode == 0) {
+		/*
+		 * is this correct?
+		 */
+		if (ide_dma_good_drive(drive) &&
+		    drive->id[ATA_ID_EIDE_DMA_TIME] < 150)
+			mode = XFER_MW_DMA_1;
+	}
+
+	mode = min(mode, req_mode);
+
+	printk(KERN_INFO "%s: %s mode selected\n", drive->name,
+			  mode ? ide_xfer_verbose(mode) : "no DMA");
+
+	return mode;
+}
+
+static int ide_tune_dma(ide_drive_t *drive)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	u8 speed;
+
+	if (ata_id_has_dma(drive->id) == 0 ||
+	    (drive->dev_flags & IDE_DFLAG_NODMA))
+		return 0;
+
+	/* consult the list of known "bad" drives */
+	if (__ide_dma_bad_drive(drive))
+		return 0;
+
+	if (hwif->host_flags & IDE_HFLAG_TRUST_BIOS_FOR_DMA)
+		return config_drive_for_dma(drive);
+
+	speed = ide_max_dma_mode(drive);
+
+	if (!speed)
+		return 0;
+
+	if (ide_set_dma_mode(drive, speed))
+		return 0;
+
+	return 1;
+}
+
+static int ide_dma_check(ide_drive_t *drive)
+{
+	ide_hwif_t *hwif = drive->hwif;
+
+	if (ide_tune_dma(drive))
+		return 0;
+
+	/* TODO: always do PIO fallback */
+	if (hwif->host_flags & IDE_HFLAG_TRUST_BIOS_FOR_DMA)
+		return -1;
+
+	ide_set_max_pio(drive);
+
+	return -1;
+}
+
+int ide_set_dma(ide_drive_t *drive)
+{
+	int rc;
+
+	/*
+	 * Force DMAing for the beginning of the check.
+	 * Some chipsets appear to do interesting
+	 * things, if not checked and cleared.
+	 *   PARANOIA!!!
+	 */
+	ide_dma_off_quietly(drive);
+
+	rc = ide_dma_check(drive);
+	if (rc)
+		return rc;
+
+	ide_dma_on(drive);
+
+	return 0;
+}
+
+void ide_check_dma_crc(ide_drive_t *drive)
+{
+	u8 mode;
+
+	ide_dma_off_quietly(drive);
+	drive->crc_count = 0;
+	mode = drive->current_speed;
+	/*
+	 * Don't try non Ultra-DMA modes without iCRC's.  Force the
+	 * device to PIO and make the user enable SWDMA/MWDMA modes.
+	 */
+	if (mode > XFER_UDMA_0 && mode <= XFER_UDMA_7)
+		mode--;
+	else
+		mode = XFER_PIO_4;
+	ide_set_xfer_rate(drive, mode);
+	if (drive->current_speed >= XFER_SW_DMA_0)
+		ide_dma_on(drive);
+}
+
+void ide_dma_lost_irq(ide_drive_t *drive)
+{
+	printk(KERN_ERR "%s: DMA interrupt recovery\n", drive->name);
+}
+EXPORT_SYMBOL_GPL(ide_dma_lost_irq);
+
+/*
+ * un-busy the port etc, and clear any pending DMA status. we want to
+ * retry the current request in pio mode instead of risking tossing it
+ * all away
+ */
+ide_startstop_t ide_dma_timeout_retry(ide_drive_t *drive, int error)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	const struct ide_dma_ops *dma_ops = hwif->dma_ops;
+	struct ide_cmd *cmd = &hwif->cmd;
+	ide_startstop_t ret = ide_stopped;
+
+	/*
+	 * end current dma transaction
+	 */
+
+	if (error < 0) {
+		printk(KERN_WARNING "%s: DMA timeout error\n", drive->name);
+		drive->waiting_for_dma = 0;
+		(void)dma_ops->dma_end(drive);
+		ide_dma_unmap_sg(drive, cmd);
+		ret = ide_error(drive, "dma timeout error",
+				hwif->tp_ops->read_status(hwif));
+	} else {
+		printk(KERN_WARNING "%s: DMA timeout retry\n", drive->name);
+		if (dma_ops->dma_clear)
+			dma_ops->dma_clear(drive);
+		printk(KERN_ERR "%s: timeout waiting for DMA\n", drive->name);
+		if (dma_ops->dma_test_irq(drive) == 0) {
+			ide_dump_status(drive, "DMA timeout",
+					hwif->tp_ops->read_status(hwif));
+			drive->waiting_for_dma = 0;
+			(void)dma_ops->dma_end(drive);
+			ide_dma_unmap_sg(drive, cmd);
+		}
+	}
+
+	/*
+	 * disable dma for now, but remember that we did so because of
+	 * a timeout -- we'll reenable after we finish this next request
+	 * (or rather the first chunk of it) in pio.
+	 */
+	drive->dev_flags |= IDE_DFLAG_DMA_PIO_RETRY;
+	drive->retry_pio++;
+	ide_dma_off_quietly(drive);
+
+	/*
+	 * make sure request is sane
+	 */
+	if (hwif->rq)
+		scsi_req(hwif->rq)->result = 0;
+	return ret;
+}
+
+void ide_release_dma_engine(ide_hwif_t *hwif)
+{
+	if (hwif->dmatable_cpu) {
+		int prd_size = hwif->prd_max_nents * hwif->prd_ent_size;
+
+		dma_free_coherent(hwif->dev, prd_size,
+				  hwif->dmatable_cpu, hwif->dmatable_dma);
+		hwif->dmatable_cpu = NULL;
+	}
+}
+EXPORT_SYMBOL_GPL(ide_release_dma_engine);
+
+int ide_allocate_dma_engine(ide_hwif_t *hwif)
+{
+	int prd_size;
+
+	if (hwif->prd_max_nents == 0)
+		hwif->prd_max_nents = PRD_ENTRIES;
+	if (hwif->prd_ent_size == 0)
+		hwif->prd_ent_size = PRD_BYTES;
+
+	prd_size = hwif->prd_max_nents * hwif->prd_ent_size;
+
+	hwif->dmatable_cpu = dma_alloc_coherent(hwif->dev, prd_size,
+						&hwif->dmatable_dma,
+						GFP_ATOMIC);
+	if (hwif->dmatable_cpu == NULL) {
+		printk(KERN_ERR "%s: unable to allocate PRD table\n",
+			hwif->name);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ide_allocate_dma_engine);
+
+int ide_dma_prepare(ide_drive_t *drive, struct ide_cmd *cmd)
+{
+	const struct ide_dma_ops *dma_ops = drive->hwif->dma_ops;
+
+	if ((drive->dev_flags & IDE_DFLAG_USING_DMA) == 0 ||
+	    (dma_ops->dma_check && dma_ops->dma_check(drive, cmd)))
+		goto out;
+	ide_map_sg(drive, cmd);
+	if (ide_dma_map_sg(drive, cmd) == 0)
+		goto out_map;
+	if (dma_ops->dma_setup(drive, cmd))
+		goto out_dma_unmap;
+	drive->waiting_for_dma = 1;
+	return 0;
+out_dma_unmap:
+	ide_dma_unmap_sg(drive, cmd);
+out_map:
+	ide_map_sg(drive, cmd);
+out:
+	return 1;
+}