Merging upstream version 4.19.304.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

13 files changed, 107 insertions, 47 deletions

diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig
index d08aeb41c..810e72e4e 100644
--- a/drivers/iio/Kconfig
+++ b/drivers/iio/Kconfig
@@ -70,6 +70,7 @@ config IIO_TRIGGERED_EVENT
 
 source "drivers/iio/accel/Kconfig"
 source "drivers/iio/adc/Kconfig"
+source "drivers/iio/addac/Kconfig"
 source "drivers/iio/afe/Kconfig"
 source "drivers/iio/amplifiers/Kconfig"
 source "drivers/iio/chemical/Kconfig"
diff --git a/drivers/iio/Makefile b/drivers/iio/Makefile
index cb5993251..a60d0cbfe 100644
--- a/drivers/iio/Makefile
+++ b/drivers/iio/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_IIO_TRIGGERED_EVENT) += industrialio-triggered-event.o
 
 obj-y += accel/
 obj-y += adc/
+obj-y += addac/
 obj-y += afe/
 obj-y += amplifiers/
 obj-y += buffer/
diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c
index 1ca2c4d39..7c5ea4ed5 100644
--- a/drivers/iio/adc/exynos_adc.c
+++ b/drivers/iio/adc/exynos_adc.c
@@ -817,6 +817,12 @@ static int exynos_adc_probe(struct platform_device *pdev)
 		}
 	}
 
+	/* leave out any TS related code if unreachable */
+	if (IS_REACHABLE(CONFIG_INPUT)) {
+		has_ts = of_property_read_bool(pdev->dev.of_node,
+					       "has-touchscreen") || pdata;
+	}
+
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
 		dev_err(&pdev->dev, "no irq resource?\n");
@@ -824,11 +830,15 @@ static int exynos_adc_probe(struct platform_device *pdev)
 	}
 	info->irq = irq;
 
-	irq = platform_get_irq(pdev, 1);
-	if (irq == -EPROBE_DEFER)
-		return irq;
+	if (has_ts) {
+		irq = platform_get_irq(pdev, 1);
+		if (irq == -EPROBE_DEFER)
+			return irq;
 
-	info->tsirq = irq;
+		info->tsirq = irq;
+	} else {
+		info->tsirq = -1;
+	}
 
 	info->dev = &pdev->dev;
 
@@ -895,12 +905,6 @@ static int exynos_adc_probe(struct platform_device *pdev)
 	if (info->data->init_hw)
 		info->data->init_hw(info);
 
-	/* leave out any TS related code if unreachable */
-	if (IS_REACHABLE(CONFIG_INPUT)) {
-		has_ts = of_property_read_bool(pdev->dev.of_node,
-					       "has-touchscreen") || pdata;
-	}
-
 	if (pdata)
 		info->delay = pdata->delay;
 	else
diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c
index 6e0ef9bb2..c44876935 100644
--- a/drivers/iio/adc/meson_saradc.c
+++ b/drivers/iio/adc/meson_saradc.c
@@ -75,7 +75,7 @@
 	#define MESON_SAR_ADC_REG3_PANEL_DETECT_COUNT_MASK	GENMASK(20, 18)
 	#define MESON_SAR_ADC_REG3_PANEL_DETECT_FILTER_TB_MASK	GENMASK(17, 16)
 	#define MESON_SAR_ADC_REG3_ADC_CLK_DIV_SHIFT		10
-	#define MESON_SAR_ADC_REG3_ADC_CLK_DIV_WIDTH		5
+	#define MESON_SAR_ADC_REG3_ADC_CLK_DIV_WIDTH		6
 	#define MESON_SAR_ADC_REG3_BLOCK_DLY_SEL_MASK		GENMASK(9, 8)
 	#define MESON_SAR_ADC_REG3_BLOCK_DLY_MASK		GENMASK(7, 0)
 
diff --git a/drivers/iio/adc/stx104.c b/drivers/iio/adc/stx104.c
index 0662ca199..49aeb7621 100644
--- a/drivers/iio/adc/stx104.c
+++ b/drivers/iio/adc/stx104.c
@@ -23,7 +23,9 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
+#include <linux/mutex.h>
 #include <linux/spinlock.h>
+#include <linux/types.h>
 
 #define STX104_OUT_CHAN(chan) {				\
 	.type = IIO_VOLTAGE,				\
@@ -53,13 +55,37 @@ module_param_hw_array(base, uint, ioport, &num_stx104, 0);
 MODULE_PARM_DESC(base, "Apex Embedded Systems STX104 base addresses");
 
 /**
+ * struct stx104_reg - device register structure
+ * @ssr_ad:	Software Strobe Register and ADC Data
+ * @achan:	ADC Channel
+ * @dio:	Digital I/O
+ * @dac:	DAC Channels
+ * @cir_asr:	Clear Interrupts and ADC Status
+ * @acr:	ADC Control
+ * @pccr_fsh:	Pacer Clock Control and FIFO Status MSB
+ * @acfg:	ADC Configuration
+ */
+struct stx104_reg {
+	u16 ssr_ad;
+	u8 achan;
+	u8 dio;
+	u16 dac[2];
+	u8 cir_asr;
+	u8 acr;
+	u8 pccr_fsh;
+	u8 acfg;
+};
+
+/**
  * struct stx104_iio - IIO device private data structure
+ * @lock: synchronization lock to prevent I/O race conditions
  * @chan_out_states:	channels' output states
- * @base:		base port address of the IIO device
+ * @reg:		I/O address offset for the device registers
  */
 struct stx104_iio {
+	struct mutex lock;
 	unsigned int chan_out_states[STX104_NUM_OUT_CHAN];
-	unsigned int base;
+	struct stx104_reg __iomem *reg;
 };
 
 /**
@@ -72,7 +98,7 @@ struct stx104_iio {
 struct stx104_gpio {
 	struct gpio_chip chip;
 	spinlock_t lock;
-	unsigned int base;
+	u8 __iomem *base;
 	unsigned int out_state;
 };
 
@@ -80,6 +106,7 @@ static int stx104_read_raw(struct iio_dev *indio_dev,
 	struct iio_chan_spec const *chan, int *val, int *val2, long mask)
 {
 	struct stx104_iio *const priv = iio_priv(indio_dev);
+	struct stx104_reg __iomem *const reg = priv->reg;
 	unsigned int adc_config;
 	int adbu;
 	int gain;
@@ -87,7 +114,7 @@ static int stx104_read_raw(struct iio_dev *indio_dev,
 	switch (mask) {
 	case IIO_CHAN_INFO_HARDWAREGAIN:
 		/* get gain configuration */
-		adc_config = inb(priv->base + 11);
+		adc_config = ioread8(&reg->acfg);
 		gain = adc_config & 0x3;
 
 		*val = 1 << gain;
@@ -98,25 +125,31 @@ static int stx104_read_raw(struct iio_dev *indio_dev,
 			return IIO_VAL_INT;
 		}
 
+		mutex_lock(&priv->lock);
+
 		/* select ADC channel */
-		outb(chan->channel | (chan->channel << 4), priv->base + 2);
+		iowrite8(chan->channel | (chan->channel << 4), &reg->achan);
+
+		/* trigger ADC sample capture by writing to the 8-bit
+		 * Software Strobe Register and wait for completion
+		 */
+		iowrite8(0, &reg->ssr_ad);
+		while (ioread8(&reg->cir_asr) & BIT(7));
 
-		/* trigger ADC sample capture and wait for completion */
-		outb(0, priv->base);
-		while (inb(priv->base + 8) & BIT(7));
+		*val = ioread16(&reg->ssr_ad);
 
-		*val = inw(priv->base);
+		mutex_unlock(&priv->lock);
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_OFFSET:
 		/* get ADC bipolar/unipolar configuration */
-		adc_config = inb(priv->base + 11);
+		adc_config = ioread8(&reg->acfg);
 		adbu = !(adc_config & BIT(2));
 
 		*val = -32768 * adbu;
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_SCALE:
 		/* get ADC bipolar/unipolar and gain configuration */
-		adc_config = inb(priv->base + 11);
+		adc_config = ioread8(&reg->acfg);
 		adbu = !(adc_config & BIT(2));
 		gain = adc_config & 0x3;
 
@@ -138,16 +171,16 @@ static int stx104_write_raw(struct iio_dev *indio_dev,
 		/* Only four gain states (x1, x2, x4, x8) */
 		switch (val) {
 		case 1:
-			outb(0, priv->base + 11);
+			iowrite8(0, &priv->reg->acfg);
 			break;
 		case 2:
-			outb(1, priv->base + 11);
+			iowrite8(1, &priv->reg->acfg);
 			break;
 		case 4:
-			outb(2, priv->base + 11);
+			iowrite8(2, &priv->reg->acfg);
 			break;
 		case 8:
-			outb(3, priv->base + 11);
+			iowrite8(3, &priv->reg->acfg);
 			break;
 		default:
 			return -EINVAL;
@@ -160,9 +193,12 @@ static int stx104_write_raw(struct iio_dev *indio_dev,
 			if ((unsigned int)val > 65535)
 				return -EINVAL;
 
+			mutex_lock(&priv->lock);
+
 			priv->chan_out_states[chan->channel] = val;
-			outw(val, priv->base + 4 + 2 * chan->channel);
+			iowrite16(val, &priv->reg->dac[chan->channel]);
 
+			mutex_unlock(&priv->lock);
 			return 0;
 		}
 		return -EINVAL;
@@ -230,7 +266,7 @@ static int stx104_gpio_get(struct gpio_chip *chip, unsigned int offset)
 	if (offset >= 4)
 		return -EINVAL;
 
-	return !!(inb(stx104gpio->base) & BIT(offset));
+	return !!(ioread8(stx104gpio->base) & BIT(offset));
 }
 
 static int stx104_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask,
@@ -238,7 +274,7 @@ static int stx104_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask,
 {
 	struct stx104_gpio *const stx104gpio = gpiochip_get_data(chip);
 
-	*bits = inb(stx104gpio->base);
+	*bits = ioread8(stx104gpio->base);
 
 	return 0;
 }
@@ -260,7 +296,7 @@ static void stx104_gpio_set(struct gpio_chip *chip, unsigned int offset,
 	else
 		stx104gpio->out_state &= ~mask;
 
-	outb(stx104gpio->out_state, stx104gpio->base);
+	iowrite8(stx104gpio->out_state, stx104gpio->base);
 
 	spin_unlock_irqrestore(&stx104gpio->lock, flags);
 }
@@ -287,7 +323,7 @@ static void stx104_gpio_set_multiple(struct gpio_chip *chip,
 
 	stx104gpio->out_state &= ~*mask;
 	stx104gpio->out_state |= *mask & *bits;
-	outb(stx104gpio->out_state, stx104gpio->base);
+	iowrite8(stx104gpio->out_state, stx104gpio->base);
 
 	spin_unlock_irqrestore(&stx104gpio->lock, flags);
 }
@@ -314,11 +350,16 @@ static int stx104_probe(struct device *dev, unsigned int id)
 		return -EBUSY;
 	}
 
+	priv = iio_priv(indio_dev);
+	priv->reg = devm_ioport_map(dev, base[id], STX104_EXTENT);
+	if (!priv->reg)
+		return -ENOMEM;
+
 	indio_dev->info = &stx104_info;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 
 	/* determine if differential inputs */
-	if (inb(base[id] + 8) & BIT(5)) {
+	if (ioread8(&priv->reg->cir_asr) & BIT(5)) {
 		indio_dev->num_channels = ARRAY_SIZE(stx104_channels_diff);
 		indio_dev->channels = stx104_channels_diff;
 	} else {
@@ -329,18 +370,17 @@ static int stx104_probe(struct device *dev, unsigned int id)
 	indio_dev->name = dev_name(dev);
 	indio_dev->dev.parent = dev;
 
-	priv = iio_priv(indio_dev);
-	priv->base = base[id];
+	mutex_init(&priv->lock);
 
 	/* configure device for software trigger operation */
-	outb(0, base[id] + 9);
+	iowrite8(0, &priv->reg->acr);
 
 	/* initialize gain setting to x1 */
-	outb(0, base[id] + 11);
+	iowrite8(0, &priv->reg->acfg);
 
 	/* initialize DAC output to 0V */
-	outw(0, base[id] + 4);
-	outw(0, base[id] + 6);
+	iowrite16(0, &priv->reg->dac[0]);
+	iowrite16(0, &priv->reg->dac[1]);
 
 	stx104gpio->chip.label = dev_name(dev);
 	stx104gpio->chip.parent = dev;
@@ -355,7 +395,7 @@ static int stx104_probe(struct device *dev, unsigned int id)
 	stx104gpio->chip.get_multiple = stx104_gpio_get_multiple;
 	stx104gpio->chip.set = stx104_gpio_set;
 	stx104gpio->chip.set_multiple = stx104_gpio_set_multiple;
-	stx104gpio->base = base[id] + 3;
+	stx104gpio->base = &priv->reg->dio;
 	stx104gpio->out_state = 0x0;
 
 	spin_lock_init(&stx104gpio->lock);
diff --git a/drivers/iio/addac/Kconfig b/drivers/iio/addac/Kconfig
new file mode 100644
index 000000000..2e64d7755
--- /dev/null
+++ b/drivers/iio/addac/Kconfig
@@ -0,0 +1,8 @@
+#
+# ADC DAC drivers
+#
+# When adding new entries keep the list in alphabetical order
+
+menu "Analog to digital and digital to analog converters"
+
+endmenu
diff --git a/drivers/iio/addac/Makefile b/drivers/iio/addac/Makefile
new file mode 100644
index 000000000..b888b9ee1
--- /dev/null
+++ b/drivers/iio/addac/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for industrial I/O ADDAC drivers
+#
+
+# When adding new entries keep the list in alphabetical order
diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
index 414cc43c2..66991fd4b 100644
--- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
+++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
@@ -46,7 +46,7 @@ int cros_ec_sensors_core_init(struct platform_device *pdev,
 	platform_set_drvdata(pdev, indio_dev);
 
 	state->ec = ec->ec_dev;
-	state->msg = devm_kzalloc(&pdev->dev,
+	state->msg = devm_kzalloc(&pdev->dev, sizeof(*state->msg) +
 				max((u16)sizeof(struct ec_params_motion_sense),
 				state->ec->max_response), GFP_KERNEL);
 	if (!state->msg)
diff --git a/drivers/iio/common/ms_sensors/ms_sensors_i2c.c b/drivers/iio/common/ms_sensors/ms_sensors_i2c.c
index 125b5ff61..a551b0071 100644
--- a/drivers/iio/common/ms_sensors/ms_sensors_i2c.c
+++ b/drivers/iio/common/ms_sensors/ms_sensors_i2c.c
@@ -16,8 +16,8 @@
 /* Conversion times in us */
 static const u16 ms_sensors_ht_t_conversion_time[] = { 50000, 25000,
 						       13000, 7000 };
-static const u16 ms_sensors_ht_h_conversion_time[] = { 16000, 3000,
-						       5000, 8000 };
+static const u16 ms_sensors_ht_h_conversion_time[] = { 16000, 5000,
+						       3000, 8000 };
 static const u16 ms_sensors_tp_conversion_time[] = { 500, 1100, 2100,
 						     4100, 8220, 16440 };
 
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index 6b560d99f..351032e4e 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -508,13 +508,13 @@ inv_mpu6050_read_raw(struct iio_dev *indio_dev,
 			ret = inv_mpu6050_sensor_show(st, st->reg->gyro_offset,
 						chan->channel2, val);
 			mutex_unlock(&st->lock);
-			return IIO_VAL_INT;
+			return ret;
 		case IIO_ACCEL:
 			mutex_lock(&st->lock);
 			ret = inv_mpu6050_sensor_show(st, st->reg->accl_offset,
 						chan->channel2, val);
 			mutex_unlock(&st->lock);
-			return IIO_VAL_INT;
+			return ret;
 
 		default:
 			return -EINVAL;
diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c
index 49d4b4f1a..ad9bd2001 100644
--- a/drivers/iio/industrialio-core.c
+++ b/drivers/iio/industrialio-core.c
@@ -323,7 +323,7 @@ static ssize_t iio_debugfs_write_reg(struct file *file,
 	char buf[80];
 	int ret;
 
-	count = min_t(size_t, count, (sizeof(buf)-1));
+	count = min(count, sizeof(buf) - 1);
 	if (copy_from_user(buf, userbuf, count))
 		return -EFAULT;
 
diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c
index 074f6f865..5efc50d93 100644
--- a/drivers/iio/pressure/bmp280-core.c
+++ b/drivers/iio/pressure/bmp280-core.c
@@ -1110,7 +1110,7 @@ int bmp280_common_probe(struct device *dev,
 	 * however as it happens, the BMP085 shares the chip ID of BMP180
 	 * so we look for an IRQ if we have that.
 	 */
-	if (irq > 0 || (chip_id  == BMP180_CHIP_ID)) {
+	if (irq > 0 && (chip_id  == BMP180_CHIP_ID)) {
 		ret = bmp085_fetch_eoc_irq(dev, name, irq, data);
 		if (ret)
 			goto out_disable_vdda;
diff --git a/drivers/iio/pressure/ms5611_core.c b/drivers/iio/pressure/ms5611_core.c
index 5c7a734ed..9980c6f33 100644
--- a/drivers/iio/pressure/ms5611_core.c
+++ b/drivers/iio/pressure/ms5611_core.c
@@ -79,7 +79,7 @@ static bool ms5611_prom_is_valid(u16 *prom, size_t len)
 
 	crc = (crc >> 12) & 0x000F;
 
-	return crc_orig != 0x0000 && crc == crc_orig;
+	return crc == crc_orig;
 }
 
 static int ms5611_read_prom(struct iio_dev *indio_dev)