Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 282 insertions, 0 deletions

diff --git a/drivers/infiniband/hw/mthca/mthca_reset.c b/drivers/infiniband/hw/mthca/mthca_reset.c
new file mode 100644
index 000000000..2a6979e4a
--- /dev/null
+++ b/drivers/infiniband/hw/mthca/mthca_reset.c
@@ -0,0 +1,282 @@
+/*
+ * Copyright (c) 2004 Topspin Communications.  All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/errno.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+
+#include "mthca_dev.h"
+#include "mthca_cmd.h"
+
+int mthca_reset(struct mthca_dev *mdev)
+{
+	int i;
+	int err = 0;
+	u32 *hca_header    = NULL;
+	u32 *bridge_header = NULL;
+	struct pci_dev *bridge = NULL;
+	int bridge_pcix_cap = 0;
+	int hca_pcie_cap = 0;
+	int hca_pcix_cap = 0;
+
+	u16 devctl;
+	u16 linkctl;
+
+#define MTHCA_RESET_OFFSET 0xf0010
+#define MTHCA_RESET_VALUE  swab32(1)
+
+	/*
+	 * Reset the chip.  This is somewhat ugly because we have to
+	 * save off the PCI header before reset and then restore it
+	 * after the chip reboots.  We skip config space offsets 22
+	 * and 23 since those have a special meaning.
+	 *
+	 * To make matters worse, for Tavor (PCI-X HCA) we have to
+	 * find the associated bridge device and save off its PCI
+	 * header as well.
+	 */
+
+	if (!(mdev->mthca_flags & MTHCA_FLAG_PCIE)) {
+		/* Look for the bridge -- its device ID will be 2 more
+		   than HCA's device ID. */
+		while ((bridge = pci_get_device(mdev->pdev->vendor,
+						mdev->pdev->device + 2,
+						bridge)) != NULL) {
+			if (bridge->hdr_type    == PCI_HEADER_TYPE_BRIDGE &&
+			    bridge->subordinate == mdev->pdev->bus) {
+				mthca_dbg(mdev, "Found bridge: %s\n",
+					  pci_name(bridge));
+				break;
+			}
+		}
+
+		if (!bridge) {
+			/*
+			 * Didn't find a bridge for a Tavor device --
+			 * assume we're in no-bridge mode and hope for
+			 * the best.
+			 */
+			mthca_warn(mdev, "No bridge found for %s\n",
+				  pci_name(mdev->pdev));
+		}
+
+	}
+
+	/* For Arbel do we need to save off the full 4K PCI Express header?? */
+	hca_header = kmalloc(256, GFP_KERNEL);
+	if (!hca_header) {
+		err = -ENOMEM;
+		goto put_dev;
+	}
+
+	for (i = 0; i < 64; ++i) {
+		if (i == 22 || i == 23)
+			continue;
+		if (pci_read_config_dword(mdev->pdev, i * 4, hca_header + i)) {
+			err = -ENODEV;
+			mthca_err(mdev, "Couldn't save HCA "
+				  "PCI header, aborting.\n");
+			goto free_hca;
+		}
+	}
+
+	hca_pcix_cap = pci_find_capability(mdev->pdev, PCI_CAP_ID_PCIX);
+	hca_pcie_cap = pci_pcie_cap(mdev->pdev);
+
+	if (bridge) {
+		bridge_header = kmalloc(256, GFP_KERNEL);
+		if (!bridge_header) {
+			err = -ENOMEM;
+			goto free_hca;
+		}
+
+		for (i = 0; i < 64; ++i) {
+			if (i == 22 || i == 23)
+				continue;
+			if (pci_read_config_dword(bridge, i * 4, bridge_header + i)) {
+				err = -ENODEV;
+				mthca_err(mdev, "Couldn't save HCA bridge "
+					  "PCI header, aborting.\n");
+				goto free_bh;
+			}
+		}
+		bridge_pcix_cap = pci_find_capability(bridge, PCI_CAP_ID_PCIX);
+		if (!bridge_pcix_cap) {
+				err = -ENODEV;
+				mthca_err(mdev, "Couldn't locate HCA bridge "
+					  "PCI-X capability, aborting.\n");
+				goto free_bh;
+		}
+	}
+
+	/* actually hit reset */
+	{
+		void __iomem *reset = ioremap(pci_resource_start(mdev->pdev, 0) +
+					      MTHCA_RESET_OFFSET, 4);
+
+		if (!reset) {
+			err = -ENOMEM;
+			mthca_err(mdev, "Couldn't map HCA reset register, "
+				  "aborting.\n");
+			goto free_bh;
+		}
+
+		writel(MTHCA_RESET_VALUE, reset);
+		iounmap(reset);
+	}
+
+	/* Docs say to wait one second before accessing device */
+	msleep(1000);
+
+	/* Now wait for PCI device to start responding again */
+	{
+		u32 v;
+		int c = 0;
+
+		for (c = 0; c < 100; ++c) {
+			if (pci_read_config_dword(bridge ? bridge : mdev->pdev, 0, &v)) {
+				err = -ENODEV;
+				mthca_err(mdev, "Couldn't access HCA after reset, "
+					  "aborting.\n");
+				goto free_bh;
+			}
+
+			if (v != 0xffffffff)
+				goto good;
+
+			msleep(100);
+		}
+
+		err = -ENODEV;
+		mthca_err(mdev, "PCI device did not come back after reset, "
+			  "aborting.\n");
+		goto free_bh;
+	}
+
+good:
+	/* Now restore the PCI headers */
+	if (bridge) {
+		if (pci_write_config_dword(bridge, bridge_pcix_cap + 0x8,
+				 bridge_header[(bridge_pcix_cap + 0x8) / 4])) {
+			err = -ENODEV;
+			mthca_err(mdev, "Couldn't restore HCA bridge Upstream "
+				  "split transaction control, aborting.\n");
+			goto free_bh;
+		}
+		if (pci_write_config_dword(bridge, bridge_pcix_cap + 0xc,
+				 bridge_header[(bridge_pcix_cap + 0xc) / 4])) {
+			err = -ENODEV;
+			mthca_err(mdev, "Couldn't restore HCA bridge Downstream "
+				  "split transaction control, aborting.\n");
+			goto free_bh;
+		}
+		/*
+		 * Bridge control register is at 0x3e, so we'll
+		 * naturally restore it last in this loop.
+		 */
+		for (i = 0; i < 16; ++i) {
+			if (i * 4 == PCI_COMMAND)
+				continue;
+
+			if (pci_write_config_dword(bridge, i * 4, bridge_header[i])) {
+				err = -ENODEV;
+				mthca_err(mdev, "Couldn't restore HCA bridge reg %x, "
+					  "aborting.\n", i);
+				goto free_bh;
+			}
+		}
+
+		if (pci_write_config_dword(bridge, PCI_COMMAND,
+					   bridge_header[PCI_COMMAND / 4])) {
+			err = -ENODEV;
+			mthca_err(mdev, "Couldn't restore HCA bridge COMMAND, "
+				  "aborting.\n");
+			goto free_bh;
+		}
+	}
+
+	if (hca_pcix_cap) {
+		if (pci_write_config_dword(mdev->pdev, hca_pcix_cap,
+				 hca_header[hca_pcix_cap / 4])) {
+			err = -ENODEV;
+			mthca_err(mdev, "Couldn't restore HCA PCI-X "
+				  "command register, aborting.\n");
+			goto free_bh;
+		}
+	}
+
+	if (hca_pcie_cap) {
+		devctl = hca_header[(hca_pcie_cap + PCI_EXP_DEVCTL) / 4];
+		if (pcie_capability_write_word(mdev->pdev, PCI_EXP_DEVCTL,
+					       devctl)) {
+			err = -ENODEV;
+			mthca_err(mdev, "Couldn't restore HCA PCI Express "
+				  "Device Control register, aborting.\n");
+			goto free_bh;
+		}
+		linkctl = hca_header[(hca_pcie_cap + PCI_EXP_LNKCTL) / 4];
+		if (pcie_capability_write_word(mdev->pdev, PCI_EXP_LNKCTL,
+					       linkctl)) {
+			err = -ENODEV;
+			mthca_err(mdev, "Couldn't restore HCA PCI Express "
+				  "Link control register, aborting.\n");
+			goto free_bh;
+		}
+	}
+
+	for (i = 0; i < 16; ++i) {
+		if (i * 4 == PCI_COMMAND)
+			continue;
+
+		if (pci_write_config_dword(mdev->pdev, i * 4, hca_header[i])) {
+			err = -ENODEV;
+			mthca_err(mdev, "Couldn't restore HCA reg %x, "
+				  "aborting.\n", i);
+			goto free_bh;
+		}
+	}
+
+	if (pci_write_config_dword(mdev->pdev, PCI_COMMAND,
+				   hca_header[PCI_COMMAND / 4])) {
+		err = -ENODEV;
+		mthca_err(mdev, "Couldn't restore HCA COMMAND, "
+			  "aborting.\n");
+	}
+free_bh:
+	kfree(bridge_header);
+free_hca:
+	kfree(hca_header);
+put_dev:
+	pci_dev_put(bridge);
+	return err;
+}