Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 477 insertions, 0 deletions

diff --git a/drivers/leds/leds-lm3692x.c b/drivers/leds/leds-lm3692x.c
new file mode 100644
index 000000000..d79a66a73
--- /dev/null
+++ b/drivers/leds/leds-lm3692x.c
@@ -0,0 +1,477 @@
+// SPDX-License-Identifier: GPL-2.0
+// TI LM3692x LED chip family driver
+// Copyright (C) 2017-18 Texas Instruments Incorporated - http://www.ti.com/
+
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <uapi/linux/uleds.h>
+
+#define LM36922_MODEL	0
+#define LM36923_MODEL	1
+
+#define LM3692X_REV		0x0
+#define LM3692X_RESET		0x1
+#define LM3692X_EN		0x10
+#define LM3692X_BRT_CTRL	0x11
+#define LM3692X_PWM_CTRL	0x12
+#define LM3692X_BOOST_CTRL	0x13
+#define LM3692X_AUTO_FREQ_HI	0x15
+#define LM3692X_AUTO_FREQ_LO	0x16
+#define LM3692X_BL_ADJ_THRESH	0x17
+#define LM3692X_BRT_LSB		0x18
+#define LM3692X_BRT_MSB		0x19
+#define LM3692X_FAULT_CTRL	0x1e
+#define LM3692X_FAULT_FLAGS	0x1f
+
+#define LM3692X_SW_RESET	BIT(0)
+#define LM3692X_DEVICE_EN	BIT(0)
+#define LM3692X_LED1_EN		BIT(1)
+#define LM3692X_LED2_EN		BIT(2)
+#define LM36923_LED3_EN		BIT(3)
+#define LM3692X_ENABLE_MASK	(LM3692X_DEVICE_EN | LM3692X_LED1_EN | \
+				 LM3692X_LED2_EN | LM36923_LED3_EN)
+
+/* Brightness Control Bits */
+#define LM3692X_BL_ADJ_POL	BIT(0)
+#define LM3692X_RAMP_RATE_125us	0x00
+#define LM3692X_RAMP_RATE_250us	BIT(1)
+#define LM3692X_RAMP_RATE_500us BIT(2)
+#define LM3692X_RAMP_RATE_1ms	(BIT(1) | BIT(2))
+#define LM3692X_RAMP_RATE_2ms	BIT(3)
+#define LM3692X_RAMP_RATE_4ms	(BIT(3) | BIT(1))
+#define LM3692X_RAMP_RATE_8ms	(BIT(2) | BIT(3))
+#define LM3692X_RAMP_RATE_16ms	(BIT(1) | BIT(2) | BIT(3))
+#define LM3692X_RAMP_EN		BIT(4)
+#define LM3692X_BRHT_MODE_REG	0x00
+#define LM3692X_BRHT_MODE_PWM	BIT(5)
+#define LM3692X_BRHT_MODE_MULTI_RAMP BIT(6)
+#define LM3692X_BRHT_MODE_RAMP_MULTI (BIT(5) | BIT(6))
+#define LM3692X_MAP_MODE_EXP	BIT(7)
+
+/* PWM Register Bits */
+#define LM3692X_PWM_FILTER_100	BIT(0)
+#define LM3692X_PWM_FILTER_150	BIT(1)
+#define LM3692X_PWM_FILTER_200	(BIT(0) | BIT(1))
+#define LM3692X_PWM_HYSTER_1LSB BIT(2)
+#define LM3692X_PWM_HYSTER_2LSB	BIT(3)
+#define LM3692X_PWM_HYSTER_3LSB (BIT(3) | BIT(2))
+#define LM3692X_PWM_HYSTER_4LSB BIT(4)
+#define LM3692X_PWM_HYSTER_5LSB (BIT(4) | BIT(2))
+#define LM3692X_PWM_HYSTER_6LSB (BIT(4) | BIT(3))
+#define LM3692X_PWM_POLARITY	BIT(5)
+#define LM3692X_PWM_SAMP_4MHZ	BIT(6)
+#define LM3692X_PWM_SAMP_24MHZ	BIT(7)
+
+/* Boost Control Bits */
+#define LM3692X_OCP_PROT_1A	BIT(0)
+#define LM3692X_OCP_PROT_1_25A	BIT(1)
+#define LM3692X_OCP_PROT_1_5A	(BIT(0) | BIT(1))
+#define LM3692X_OVP_21V		BIT(2)
+#define LM3692X_OVP_25V		BIT(3)
+#define LM3692X_OVP_29V		(BIT(2) | BIT(3))
+#define LM3692X_MIN_IND_22UH	BIT(4)
+#define LM3692X_BOOST_SW_1MHZ	BIT(5)
+#define LM3692X_BOOST_SW_NO_SHIFT	BIT(6)
+
+/* Fault Control Bits */
+#define LM3692X_FAULT_CTRL_OVP BIT(0)
+#define LM3692X_FAULT_CTRL_OCP BIT(1)
+#define LM3692X_FAULT_CTRL_TSD BIT(2)
+#define LM3692X_FAULT_CTRL_OPEN BIT(3)
+
+/* Fault Flag Bits */
+#define LM3692X_FAULT_FLAG_OVP BIT(0)
+#define LM3692X_FAULT_FLAG_OCP BIT(1)
+#define LM3692X_FAULT_FLAG_TSD BIT(2)
+#define LM3692X_FAULT_FLAG_SHRT BIT(3)
+#define LM3692X_FAULT_FLAG_OPEN BIT(4)
+
+/**
+ * struct lm3692x_led -
+ * @lock - Lock for reading/writing the device
+ * @client - Pointer to the I2C client
+ * @led_dev - LED class device pointer
+ * @regmap - Devices register map
+ * @enable_gpio - VDDIO/EN gpio to enable communication interface
+ * @regulator - LED supply regulator pointer
+ * @label - LED label
+ * @led_enable - LED sync to be enabled
+ * @model_id - Current device model ID enumerated
+ */
+struct lm3692x_led {
+	struct mutex lock;
+	struct i2c_client *client;
+	struct led_classdev led_dev;
+	struct regmap *regmap;
+	struct gpio_desc *enable_gpio;
+	struct regulator *regulator;
+	char label[LED_MAX_NAME_SIZE];
+	int led_enable;
+	int model_id;
+};
+
+static const struct reg_default lm3692x_reg_defs[] = {
+	{LM3692X_EN, 0xf},
+	{LM3692X_BRT_CTRL, 0x61},
+	{LM3692X_PWM_CTRL, 0x73},
+	{LM3692X_BOOST_CTRL, 0x6f},
+	{LM3692X_AUTO_FREQ_HI, 0x0},
+	{LM3692X_AUTO_FREQ_LO, 0x0},
+	{LM3692X_BL_ADJ_THRESH, 0x0},
+	{LM3692X_BRT_LSB, 0x7},
+	{LM3692X_BRT_MSB, 0xff},
+	{LM3692X_FAULT_CTRL, 0x7},
+};
+
+static const struct regmap_config lm3692x_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = LM3692X_FAULT_FLAGS,
+	.reg_defaults = lm3692x_reg_defs,
+	.num_reg_defaults = ARRAY_SIZE(lm3692x_reg_defs),
+	.cache_type = REGCACHE_RBTREE,
+};
+
+static int lm3692x_fault_check(struct lm3692x_led *led)
+{
+	int ret;
+	unsigned int read_buf;
+
+	ret = regmap_read(led->regmap, LM3692X_FAULT_FLAGS, &read_buf);
+	if (ret)
+		return ret;
+
+	if (read_buf)
+		dev_err(&led->client->dev, "Detected a fault 0x%X\n", read_buf);
+
+	/* The first read may clear the fault.  Check again to see if the fault
+	 * still exits and return that value.
+	 */
+	regmap_read(led->regmap, LM3692X_FAULT_FLAGS, &read_buf);
+	if (read_buf)
+		dev_err(&led->client->dev, "Second read of fault flags 0x%X\n",
+			read_buf);
+
+	return read_buf;
+}
+
+static int lm3692x_brightness_set(struct led_classdev *led_cdev,
+				enum led_brightness brt_val)
+{
+	struct lm3692x_led *led =
+			container_of(led_cdev, struct lm3692x_led, led_dev);
+	int ret;
+	int led_brightness_lsb = (brt_val >> 5);
+
+	mutex_lock(&led->lock);
+
+	ret = lm3692x_fault_check(led);
+	if (ret) {
+		dev_err(&led->client->dev, "Cannot read/clear faults\n");
+		goto out;
+	}
+
+	ret = regmap_write(led->regmap, LM3692X_BRT_MSB, brt_val);
+	if (ret) {
+		dev_err(&led->client->dev, "Cannot write MSB\n");
+		goto out;
+	}
+
+	ret = regmap_write(led->regmap, LM3692X_BRT_LSB, led_brightness_lsb);
+	if (ret) {
+		dev_err(&led->client->dev, "Cannot write LSB\n");
+		goto out;
+	}
+out:
+	mutex_unlock(&led->lock);
+	return ret;
+}
+
+static int lm3692x_init(struct lm3692x_led *led)
+{
+	int enable_state;
+	int ret;
+
+	if (led->regulator) {
+		ret = regulator_enable(led->regulator);
+		if (ret) {
+			dev_err(&led->client->dev,
+				"Failed to enable regulator\n");
+			return ret;
+		}
+	}
+
+	if (led->enable_gpio)
+		gpiod_direction_output(led->enable_gpio, 1);
+
+	ret = lm3692x_fault_check(led);
+	if (ret) {
+		dev_err(&led->client->dev, "Cannot read/clear faults\n");
+		goto out;
+	}
+
+	ret = regmap_write(led->regmap, LM3692X_BRT_CTRL, 0x00);
+	if (ret)
+		goto out;
+
+	/*
+	 * For glitch free operation, the following data should
+	 * only be written while LEDx enable bits are 0 and the device enable
+	 * bit is set to 1.
+	 * per Section 7.5.14 of the data sheet
+	 */
+	ret = regmap_write(led->regmap, LM3692X_EN, LM3692X_DEVICE_EN);
+	if (ret)
+		goto out;
+
+	/* Set the brightness to 0 so when enabled the LEDs do not come
+	 * on with full brightness.
+	 */
+	ret = regmap_write(led->regmap, LM3692X_BRT_MSB, 0);
+	if (ret)
+		goto out;
+
+	ret = regmap_write(led->regmap, LM3692X_BRT_LSB, 0);
+	if (ret)
+		goto out;
+
+	ret = regmap_write(led->regmap, LM3692X_PWM_CTRL,
+		LM3692X_PWM_FILTER_100 | LM3692X_PWM_SAMP_24MHZ);
+	if (ret)
+		goto out;
+
+	ret = regmap_write(led->regmap, LM3692X_BOOST_CTRL,
+			LM3692X_BRHT_MODE_RAMP_MULTI |
+			LM3692X_BL_ADJ_POL |
+			LM3692X_RAMP_RATE_250us);
+	if (ret)
+		goto out;
+
+	ret = regmap_write(led->regmap, LM3692X_AUTO_FREQ_HI, 0x00);
+	if (ret)
+		goto out;
+
+	ret = regmap_write(led->regmap, LM3692X_AUTO_FREQ_LO, 0x00);
+	if (ret)
+		goto out;
+
+	ret = regmap_write(led->regmap, LM3692X_BL_ADJ_THRESH, 0x00);
+	if (ret)
+		goto out;
+
+	ret = regmap_write(led->regmap, LM3692X_BRT_CTRL,
+			LM3692X_BL_ADJ_POL | LM3692X_PWM_HYSTER_4LSB);
+	if (ret)
+		goto out;
+
+	switch (led->led_enable) {
+	case 0:
+	default:
+		if (led->model_id == LM36923_MODEL)
+			enable_state = LM3692X_LED1_EN | LM3692X_LED2_EN |
+			       LM36923_LED3_EN;
+		else
+			enable_state = LM3692X_LED1_EN | LM3692X_LED2_EN;
+
+		break;
+	case 1:
+		enable_state = LM3692X_LED1_EN;
+		break;
+	case 2:
+		enable_state = LM3692X_LED2_EN;
+		break;
+
+	case 3:
+		if (led->model_id == LM36923_MODEL) {
+			enable_state = LM36923_LED3_EN;
+			break;
+		}
+
+		ret = -EINVAL;
+		dev_err(&led->client->dev,
+			"LED3 sync not available on this device\n");
+		goto out;
+	}
+
+	ret = regmap_update_bits(led->regmap, LM3692X_EN, LM3692X_ENABLE_MASK,
+				 enable_state | LM3692X_DEVICE_EN);
+
+	return ret;
+out:
+	dev_err(&led->client->dev, "Fail writing initialization values\n");
+
+	if (led->enable_gpio)
+		gpiod_direction_output(led->enable_gpio, 0);
+
+	if (led->regulator) {
+		ret = regulator_disable(led->regulator);
+		if (ret)
+			dev_err(&led->client->dev,
+				"Failed to disable regulator\n");
+	}
+
+	return ret;
+}
+static int lm3692x_probe_dt(struct lm3692x_led *led)
+{
+	struct fwnode_handle *child = NULL;
+	const char *name;
+	int ret;
+
+	led->enable_gpio = devm_gpiod_get_optional(&led->client->dev,
+						   "enable", GPIOD_OUT_LOW);
+	if (IS_ERR(led->enable_gpio)) {
+		ret = PTR_ERR(led->enable_gpio);
+		dev_err(&led->client->dev, "Failed to get enable gpio: %d\n",
+			ret);
+		return ret;
+	}
+
+	led->regulator = devm_regulator_get_optional(&led->client->dev, "vled");
+	if (IS_ERR(led->regulator)) {
+		ret = PTR_ERR(led->regulator);
+		if (ret != -ENODEV) {
+			if (ret != -EPROBE_DEFER)
+				dev_err(&led->client->dev,
+					"Failed to get vled regulator: %d\n",
+					ret);
+			return ret;
+		}
+		led->regulator = NULL;
+	}
+
+	child = device_get_next_child_node(&led->client->dev, child);
+	if (!child) {
+		dev_err(&led->client->dev, "No LED Child node\n");
+		return -ENODEV;
+	}
+
+	fwnode_property_read_string(child, "linux,default-trigger",
+				    &led->led_dev.default_trigger);
+
+	ret = fwnode_property_read_string(child, "label", &name);
+	if (ret)
+		snprintf(led->label, sizeof(led->label),
+			"%s::", led->client->name);
+	else
+		snprintf(led->label, sizeof(led->label),
+			 "%s:%s", led->client->name, name);
+
+	ret = fwnode_property_read_u32(child, "reg", &led->led_enable);
+	if (ret) {
+		dev_err(&led->client->dev, "reg DT property missing\n");
+		return ret;
+	}
+
+	led->led_dev.name = led->label;
+
+	ret = devm_led_classdev_register(&led->client->dev, &led->led_dev);
+	if (ret) {
+		dev_err(&led->client->dev, "led register err: %d\n", ret);
+		return ret;
+	}
+
+	led->led_dev.dev->of_node = to_of_node(child);
+
+	return 0;
+}
+
+static int lm3692x_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct lm3692x_led *led;
+	int ret;
+
+	led = devm_kzalloc(&client->dev, sizeof(*led), GFP_KERNEL);
+	if (!led)
+		return -ENOMEM;
+
+	mutex_init(&led->lock);
+	led->client = client;
+	led->led_dev.brightness_set_blocking = lm3692x_brightness_set;
+	led->model_id = id->driver_data;
+	i2c_set_clientdata(client, led);
+
+	led->regmap = devm_regmap_init_i2c(client, &lm3692x_regmap_config);
+	if (IS_ERR(led->regmap)) {
+		ret = PTR_ERR(led->regmap);
+		dev_err(&client->dev, "Failed to allocate register map: %d\n",
+			ret);
+		return ret;
+	}
+
+	ret = lm3692x_probe_dt(led);
+	if (ret)
+		return ret;
+
+	ret = lm3692x_init(led);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int lm3692x_remove(struct i2c_client *client)
+{
+	struct lm3692x_led *led = i2c_get_clientdata(client);
+	int ret;
+
+	ret = regmap_update_bits(led->regmap, LM3692X_EN, LM3692X_DEVICE_EN, 0);
+	if (ret) {
+		dev_err(&led->client->dev, "Failed to disable regulator\n");
+		return ret;
+	}
+
+	if (led->enable_gpio)
+		gpiod_direction_output(led->enable_gpio, 0);
+
+	if (led->regulator) {
+		ret = regulator_disable(led->regulator);
+		if (ret)
+			dev_err(&led->client->dev,
+				"Failed to disable regulator\n");
+	}
+
+	mutex_destroy(&led->lock);
+
+	return 0;
+}
+
+static const struct i2c_device_id lm3692x_id[] = {
+	{ "lm36922", LM36922_MODEL },
+	{ "lm36923", LM36923_MODEL },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, lm3692x_id);
+
+static const struct of_device_id of_lm3692x_leds_match[] = {
+	{ .compatible = "ti,lm36922", },
+	{ .compatible = "ti,lm36923", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, of_lm3692x_leds_match);
+
+static struct i2c_driver lm3692x_driver = {
+	.driver = {
+		.name	= "lm3692x",
+		.of_match_table = of_lm3692x_leds_match,
+	},
+	.probe		= lm3692x_probe,
+	.remove		= lm3692x_remove,
+	.id_table	= lm3692x_id,
+};
+module_i2c_driver(lm3692x_driver);
+
+MODULE_DESCRIPTION("Texas Instruments LM3692X LED driver");
+MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
+MODULE_LICENSE("GPL v2");