Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 326 insertions, 0 deletions

diff --git a/drivers/media/pci/solo6x10/solo6x10-p2m.c b/drivers/media/pci/solo6x10/solo6x10-p2m.c
new file mode 100644
index 000000000..46c30430e
--- /dev/null
+++ b/drivers/media/pci/solo6x10/solo6x10-p2m.c
@@ -0,0 +1,326 @@
+/*
+ * Copyright (C) 2010-2013 Bluecherry, LLC <http://www.bluecherrydvr.com>
+ *
+ * Original author:
+ * Ben Collins <bcollins@ubuntu.com>
+ *
+ * Additional work by:
+ * John Brooks <john.brooks@bluecherry.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include "solo6x10.h"
+
+static int multi_p2m;
+module_param(multi_p2m, uint, 0644);
+MODULE_PARM_DESC(multi_p2m,
+		 "Use multiple P2M DMA channels (default: no, 6010-only)");
+
+static int desc_mode;
+module_param(desc_mode, uint, 0644);
+MODULE_PARM_DESC(desc_mode,
+		 "Allow use of descriptor mode DMA (default: no, 6010-only)");
+
+int solo_p2m_dma(struct solo_dev *solo_dev, int wr,
+		 void *sys_addr, u32 ext_addr, u32 size,
+		 int repeat, u32 ext_size)
+{
+	dma_addr_t dma_addr;
+	int ret;
+
+	if (WARN_ON_ONCE((unsigned long)sys_addr & 0x03))
+		return -EINVAL;
+	if (WARN_ON_ONCE(!size))
+		return -EINVAL;
+
+	dma_addr = pci_map_single(solo_dev->pdev, sys_addr, size,
+				  wr ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE);
+	if (pci_dma_mapping_error(solo_dev->pdev, dma_addr))
+		return -ENOMEM;
+
+	ret = solo_p2m_dma_t(solo_dev, wr, dma_addr, ext_addr, size,
+			     repeat, ext_size);
+
+	pci_unmap_single(solo_dev->pdev, dma_addr, size,
+			 wr ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE);
+
+	return ret;
+}
+
+/* Mutex must be held for p2m_id before calling this!! */
+int solo_p2m_dma_desc(struct solo_dev *solo_dev,
+		      struct solo_p2m_desc *desc, dma_addr_t desc_dma,
+		      int desc_cnt)
+{
+	struct solo_p2m_dev *p2m_dev;
+	unsigned int timeout;
+	unsigned int config = 0;
+	int ret = 0;
+	unsigned int p2m_id = 0;
+
+	/* Get next ID. According to Softlogic, 6110 has problems on !=0 P2M */
+	if (solo_dev->type != SOLO_DEV_6110 && multi_p2m)
+		p2m_id = atomic_inc_return(&solo_dev->p2m_count) % SOLO_NR_P2M;
+
+	p2m_dev = &solo_dev->p2m_dev[p2m_id];
+
+	if (mutex_lock_interruptible(&p2m_dev->mutex))
+		return -EINTR;
+
+	reinit_completion(&p2m_dev->completion);
+	p2m_dev->error = 0;
+
+	if (desc_cnt > 1 && solo_dev->type != SOLO_DEV_6110 && desc_mode) {
+		/* For 6010 with more than one desc, we can do a one-shot */
+		p2m_dev->desc_count = p2m_dev->desc_idx = 0;
+		config = solo_reg_read(solo_dev, SOLO_P2M_CONFIG(p2m_id));
+
+		solo_reg_write(solo_dev, SOLO_P2M_DES_ADR(p2m_id), desc_dma);
+		solo_reg_write(solo_dev, SOLO_P2M_DESC_ID(p2m_id), desc_cnt);
+		solo_reg_write(solo_dev, SOLO_P2M_CONFIG(p2m_id), config |
+			       SOLO_P2M_DESC_MODE);
+	} else {
+		/* For single descriptors and 6110, we need to run each desc */
+		p2m_dev->desc_count = desc_cnt;
+		p2m_dev->desc_idx = 1;
+		p2m_dev->descs = desc;
+
+		solo_reg_write(solo_dev, SOLO_P2M_TAR_ADR(p2m_id),
+			       desc[1].dma_addr);
+		solo_reg_write(solo_dev, SOLO_P2M_EXT_ADR(p2m_id),
+			       desc[1].ext_addr);
+		solo_reg_write(solo_dev, SOLO_P2M_EXT_CFG(p2m_id),
+			       desc[1].cfg);
+		solo_reg_write(solo_dev, SOLO_P2M_CONTROL(p2m_id),
+			       desc[1].ctrl);
+	}
+
+	timeout = wait_for_completion_timeout(&p2m_dev->completion,
+					      solo_dev->p2m_jiffies);
+
+	if (WARN_ON_ONCE(p2m_dev->error))
+		ret = -EIO;
+	else if (timeout == 0) {
+		solo_dev->p2m_timeouts++;
+		ret = -EAGAIN;
+	}
+
+	solo_reg_write(solo_dev, SOLO_P2M_CONTROL(p2m_id), 0);
+
+	/* Don't write here for the no_desc_mode case, because config is 0.
+	 * We can't test no_desc_mode again, it might race. */
+	if (desc_cnt > 1 && solo_dev->type != SOLO_DEV_6110 && config)
+		solo_reg_write(solo_dev, SOLO_P2M_CONFIG(p2m_id), config);
+
+	mutex_unlock(&p2m_dev->mutex);
+
+	return ret;
+}
+
+void solo_p2m_fill_desc(struct solo_p2m_desc *desc, int wr,
+			dma_addr_t dma_addr, u32 ext_addr, u32 size,
+			int repeat, u32 ext_size)
+{
+	WARN_ON_ONCE(dma_addr & 0x03);
+	WARN_ON_ONCE(!size);
+
+	desc->cfg = SOLO_P2M_COPY_SIZE(size >> 2);
+	desc->ctrl = SOLO_P2M_BURST_SIZE(SOLO_P2M_BURST_256) |
+		(wr ? SOLO_P2M_WRITE : 0) | SOLO_P2M_TRANS_ON;
+
+	if (repeat) {
+		desc->cfg |= SOLO_P2M_EXT_INC(ext_size >> 2);
+		desc->ctrl |=  SOLO_P2M_PCI_INC(size >> 2) |
+			 SOLO_P2M_REPEAT(repeat);
+	}
+
+	desc->dma_addr = dma_addr;
+	desc->ext_addr = ext_addr;
+}
+
+int solo_p2m_dma_t(struct solo_dev *solo_dev, int wr,
+		   dma_addr_t dma_addr, u32 ext_addr, u32 size,
+		   int repeat, u32 ext_size)
+{
+	struct solo_p2m_desc desc[2];
+
+	solo_p2m_fill_desc(&desc[1], wr, dma_addr, ext_addr, size, repeat,
+			   ext_size);
+
+	/* No need for desc_dma since we know it is a single-shot */
+	return solo_p2m_dma_desc(solo_dev, desc, 0, 1);
+}
+
+void solo_p2m_isr(struct solo_dev *solo_dev, int id)
+{
+	struct solo_p2m_dev *p2m_dev = &solo_dev->p2m_dev[id];
+	struct solo_p2m_desc *desc;
+
+	if (p2m_dev->desc_count <= p2m_dev->desc_idx) {
+		complete(&p2m_dev->completion);
+		return;
+	}
+
+	/* Setup next descriptor */
+	p2m_dev->desc_idx++;
+	desc = &p2m_dev->descs[p2m_dev->desc_idx];
+
+	solo_reg_write(solo_dev, SOLO_P2M_CONTROL(id), 0);
+	solo_reg_write(solo_dev, SOLO_P2M_TAR_ADR(id), desc->dma_addr);
+	solo_reg_write(solo_dev, SOLO_P2M_EXT_ADR(id), desc->ext_addr);
+	solo_reg_write(solo_dev, SOLO_P2M_EXT_CFG(id), desc->cfg);
+	solo_reg_write(solo_dev, SOLO_P2M_CONTROL(id), desc->ctrl);
+}
+
+void solo_p2m_error_isr(struct solo_dev *solo_dev)
+{
+	unsigned int err = solo_reg_read(solo_dev, SOLO_PCI_ERR);
+	struct solo_p2m_dev *p2m_dev;
+	int i;
+
+	if (!(err & (SOLO_PCI_ERR_P2M | SOLO_PCI_ERR_P2M_DESC)))
+		return;
+
+	for (i = 0; i < SOLO_NR_P2M; i++) {
+		p2m_dev = &solo_dev->p2m_dev[i];
+		p2m_dev->error = 1;
+		solo_reg_write(solo_dev, SOLO_P2M_CONTROL(i), 0);
+		complete(&p2m_dev->completion);
+	}
+}
+
+void solo_p2m_exit(struct solo_dev *solo_dev)
+{
+	int i;
+
+	for (i = 0; i < SOLO_NR_P2M; i++)
+		solo_irq_off(solo_dev, SOLO_IRQ_P2M(i));
+}
+
+static int solo_p2m_test(struct solo_dev *solo_dev, int base, int size)
+{
+	u32 *wr_buf;
+	u32 *rd_buf;
+	int i;
+	int ret = -EIO;
+	int order = get_order(size);
+
+	wr_buf = (u32 *)__get_free_pages(GFP_KERNEL, order);
+	if (wr_buf == NULL)
+		return -1;
+
+	rd_buf = (u32 *)__get_free_pages(GFP_KERNEL, order);
+	if (rd_buf == NULL) {
+		free_pages((unsigned long)wr_buf, order);
+		return -1;
+	}
+
+	for (i = 0; i < (size >> 3); i++)
+		*(wr_buf + i) = (i << 16) | (i + 1);
+
+	for (i = (size >> 3); i < (size >> 2); i++)
+		*(wr_buf + i) = ~((i << 16) | (i + 1));
+
+	memset(rd_buf, 0x55, size);
+
+	if (solo_p2m_dma(solo_dev, 1, wr_buf, base, size, 0, 0))
+		goto test_fail;
+
+	if (solo_p2m_dma(solo_dev, 0, rd_buf, base, size, 0, 0))
+		goto test_fail;
+
+	for (i = 0; i < (size >> 2); i++) {
+		if (*(wr_buf + i) != *(rd_buf + i))
+			goto test_fail;
+	}
+
+	ret = 0;
+
+test_fail:
+	free_pages((unsigned long)wr_buf, order);
+	free_pages((unsigned long)rd_buf, order);
+
+	return ret;
+}
+
+int solo_p2m_init(struct solo_dev *solo_dev)
+{
+	struct solo_p2m_dev *p2m_dev;
+	int i;
+
+	for (i = 0; i < SOLO_NR_P2M; i++) {
+		p2m_dev = &solo_dev->p2m_dev[i];
+
+		mutex_init(&p2m_dev->mutex);
+		init_completion(&p2m_dev->completion);
+
+		solo_reg_write(solo_dev, SOLO_P2M_CONTROL(i), 0);
+		solo_reg_write(solo_dev, SOLO_P2M_CONFIG(i),
+			       SOLO_P2M_CSC_16BIT_565 |
+			       SOLO_P2M_DESC_INTR_OPT |
+			       SOLO_P2M_DMA_INTERVAL(0) |
+			       SOLO_P2M_PCI_MASTER_MODE);
+		solo_irq_on(solo_dev, SOLO_IRQ_P2M(i));
+	}
+
+	/* Find correct SDRAM size */
+	for (solo_dev->sdram_size = 0, i = 2; i >= 0; i--) {
+		solo_reg_write(solo_dev, SOLO_DMA_CTRL,
+			       SOLO_DMA_CTRL_REFRESH_CYCLE(1) |
+			       SOLO_DMA_CTRL_SDRAM_SIZE(i) |
+			       SOLO_DMA_CTRL_SDRAM_CLK_INVERT |
+			       SOLO_DMA_CTRL_READ_CLK_SELECT |
+			       SOLO_DMA_CTRL_LATENCY(1));
+
+		solo_reg_write(solo_dev, SOLO_SYS_CFG, solo_dev->sys_config |
+			       SOLO_SYS_CFG_RESET);
+		solo_reg_write(solo_dev, SOLO_SYS_CFG, solo_dev->sys_config);
+
+		switch (i) {
+		case 2:
+			if (solo_p2m_test(solo_dev, 0x07ff0000, 0x00010000) ||
+			    solo_p2m_test(solo_dev, 0x05ff0000, 0x00010000))
+				continue;
+			break;
+
+		case 1:
+			if (solo_p2m_test(solo_dev, 0x03ff0000, 0x00010000))
+				continue;
+			break;
+
+		default:
+			if (solo_p2m_test(solo_dev, 0x01ff0000, 0x00010000))
+				continue;
+		}
+
+		solo_dev->sdram_size = (32 << 20) << i;
+		break;
+	}
+
+	if (!solo_dev->sdram_size) {
+		dev_err(&solo_dev->pdev->dev, "Error detecting SDRAM size\n");
+		return -EIO;
+	}
+
+	if (SOLO_SDRAM_END(solo_dev) > solo_dev->sdram_size) {
+		dev_err(&solo_dev->pdev->dev,
+			"SDRAM is not large enough (%u < %u)\n",
+			solo_dev->sdram_size, SOLO_SDRAM_END(solo_dev));
+		return -EIO;
+	}
+
+	return 0;
+}