Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 116 insertions, 0 deletions

diff --git a/drivers/media/usb/b2c2/flexcop-usb.h b/drivers/media/usb/b2c2/flexcop-usb.h
new file mode 100644
index 000000000..3dfd25fa4
--- /dev/null
+++ b/drivers/media/usb/b2c2/flexcop-usb.h
@@ -0,0 +1,116 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
+ * flexcop-usb.h - header file for the USB part
+ * see flexcop.c for copyright information
+ */
+#ifndef __FLEXCOP_USB_H_INCLUDED__
+#define __FLEXCOP_USB_H_INCLUDED__
+
+#include <linux/usb.h>
+
+/* transfer parameters */
+#define B2C2_USB_FRAMES_PER_ISO 4
+#define B2C2_USB_NUM_ISO_URB 4
+
+#define B2C2_USB_CTRL_PIPE_IN usb_rcvctrlpipe(fc_usb->udev, 0)
+#define B2C2_USB_CTRL_PIPE_OUT usb_sndctrlpipe(fc_usb->udev, 0)
+#define B2C2_USB_DATA_PIPE usb_rcvisocpipe(fc_usb->udev, 0x81)
+
+struct flexcop_usb {
+	struct usb_device *udev;
+	struct usb_interface *uintf;
+
+	u8 *iso_buffer;
+	int buffer_size;
+	dma_addr_t dma_addr;
+
+	struct urb *iso_urb[B2C2_USB_NUM_ISO_URB];
+	struct flexcop_device *fc_dev;
+
+	u8 tmp_buffer[1023+190];
+	int tmp_buffer_length;
+
+	/* for URB control messages */
+	u8 data[80];
+	struct mutex data_mutex;
+};
+
+#if 0
+/* request types TODO What is its use?*/
+typedef enum {
+
+} flexcop_usb_request_type_t;
+#endif
+
+/* request */
+typedef enum {
+	B2C2_USB_WRITE_V8_MEM = 0x04,
+	B2C2_USB_READ_V8_MEM  = 0x05,
+	B2C2_USB_READ_REG     = 0x08,
+	B2C2_USB_WRITE_REG    = 0x0A,
+	B2C2_USB_WRITEREGHI   = 0x0B,
+	B2C2_USB_FLASH_BLOCK  = 0x10,
+	B2C2_USB_I2C_REQUEST  = 0x11,
+	B2C2_USB_UTILITY      = 0x12,
+} flexcop_usb_request_t;
+
+/* function definition for I2C_REQUEST */
+typedef enum {
+	USB_FUNC_I2C_WRITE       = 0x01,
+	USB_FUNC_I2C_MULTIWRITE  = 0x02,
+	USB_FUNC_I2C_READ        = 0x03,
+	USB_FUNC_I2C_REPEATWRITE = 0x04,
+	USB_FUNC_GET_DESCRIPTOR  = 0x05,
+	USB_FUNC_I2C_REPEATREAD  = 0x06,
+	/* DKT 020208 - add this to support special case of DiSEqC */
+	USB_FUNC_I2C_CHECKWRITE  = 0x07,
+	USB_FUNC_I2C_CHECKRESULT = 0x08,
+} flexcop_usb_i2c_function_t;
+
+/* function definition for UTILITY request 0x12
+ * DKT 020304 - new utility function */
+typedef enum {
+	UTILITY_SET_FILTER          = 0x01,
+	UTILITY_DATA_ENABLE         = 0x02,
+	UTILITY_FLEX_MULTIWRITE     = 0x03,
+	UTILITY_SET_BUFFER_SIZE     = 0x04,
+	UTILITY_FLEX_OPERATOR       = 0x05,
+	UTILITY_FLEX_RESET300_START = 0x06,
+	UTILITY_FLEX_RESET300_STOP  = 0x07,
+	UTILITY_FLEX_RESET300       = 0x08,
+	UTILITY_SET_ISO_SIZE        = 0x09,
+	UTILITY_DATA_RESET          = 0x0A,
+	UTILITY_GET_DATA_STATUS     = 0x10,
+	UTILITY_GET_V8_REG          = 0x11,
+	/* DKT 020326 - add function for v1.14 */
+	UTILITY_SRAM_WRITE          = 0x12,
+	UTILITY_SRAM_READ           = 0x13,
+	UTILITY_SRAM_TESTFILL       = 0x14,
+	UTILITY_SRAM_TESTSET        = 0x15,
+	UTILITY_SRAM_TESTVERIFY     = 0x16,
+} flexcop_usb_utility_function_t;
+
+#define B2C2_WAIT_FOR_OPERATION_RW 1000
+#define B2C2_WAIT_FOR_OPERATION_RDW 3000
+#define B2C2_WAIT_FOR_OPERATION_WDW 1000
+
+#define B2C2_WAIT_FOR_OPERATION_V8READ 3000
+#define B2C2_WAIT_FOR_OPERATION_V8WRITE 3000
+#define B2C2_WAIT_FOR_OPERATION_V8FLASH 3000
+
+typedef enum {
+	V8_MEMORY_PAGE_DVB_CI = 0x20,
+	V8_MEMORY_PAGE_DVB_DS = 0x40,
+	V8_MEMORY_PAGE_MULTI2 = 0x60,
+	V8_MEMORY_PAGE_FLASH  = 0x80
+} flexcop_usb_mem_page_t;
+
+#define V8_MEMORY_EXTENDED (1 << 15)
+#define USB_MEM_READ_MAX   32
+#define USB_MEM_WRITE_MAX   1
+#define USB_FLASH_MAX       8
+#define V8_MEMORY_PAGE_SIZE 0x8000 /* 32K */
+#define V8_MEMORY_PAGE_MASK 0x7FFF
+
+#endif