Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

9 files changed, 8338 insertions, 0 deletions

diff --git a/drivers/net/ethernet/natsemi/Kconfig b/drivers/net/ethernet/natsemi/Kconfig
new file mode 100644
index 000000000..017fb2322
--- /dev/null
+++ b/drivers/net/ethernet/natsemi/Kconfig
@@ -0,0 +1,64 @@
+#
+# National Semiconductor device configuration
+#
+
+config NET_VENDOR_NATSEMI
+	bool "National Semiconductor devices"
+	default y
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about National Semiconductor devices. If you say Y,
+	  you will be asked for your specific card in the following questions.
+
+if NET_VENDOR_NATSEMI
+
+config MACSONIC
+	tristate "Macintosh SONIC based ethernet (onboard, NuBus, LC, CS)"
+	depends on MAC
+	---help---
+	  Support for NatSemi SONIC based Ethernet devices.  This includes
+	  the onboard Ethernet in many Quadras as well as some LC-PDS,
+	  a few Nubus and all known Comm Slot Ethernet cards.  If you have
+	  one of these say Y here.
+
+	  To compile this driver as a module, choose M here. This module will
+	  be called macsonic.
+
+config MIPS_JAZZ_SONIC
+	tristate "MIPS JAZZ onboard SONIC Ethernet support"
+	depends on MACH_JAZZ
+	---help---
+	  This is the driver for the onboard card of MIPS Magnum 4000,
+	  Acer PICA, Olivetti M700-10 and a few other identical OEM systems.
+
+config NATSEMI
+	tristate "National Semiconductor DP8381x series PCI Ethernet support"
+	depends on PCI
+	select CRC32
+	---help---
+	  This driver is for the National Semiconductor DP83810 series,
+	  which is used in cards from PureData, NetGear, Linksys
+	  and others, including the 83815 chip.
+	  More specific information and updates are available from
+	  <http://www.scyld.com/network/natsemi.html>.
+
+config NS83820
+	tristate "National Semiconductor DP83820 support"
+	depends on PCI
+	---help---
+	  This is a driver for the National Semiconductor DP83820 series
+	  of gigabit ethernet MACs.  Cards using this chipset include
+	  the D-Link DGE-500T, PureData's PDP8023Z-TG, SMC's SMC9462TX,
+	  SOHO-GA2000T, SOHO-GA2500T.  The driver supports the use of
+	  zero copy.
+
+config XTENSA_XT2000_SONIC
+	tristate "Xtensa XT2000 onboard SONIC Ethernet support"
+	depends on XTENSA_PLATFORM_XT2000
+	---help---
+	  This is the driver for the onboard card of the Xtensa XT2000 board.
+
+endif # NET_VENDOR_NATSEMI
diff --git a/drivers/net/ethernet/natsemi/Makefile b/drivers/net/ethernet/natsemi/Makefile
new file mode 100644
index 000000000..a759aa09e
--- /dev/null
+++ b/drivers/net/ethernet/natsemi/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the National Semiconductor Sonic devices.
+#
+
+obj-$(CONFIG_MACSONIC) += macsonic.o
+obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
+obj-$(CONFIG_NATSEMI) += natsemi.o
+obj-$(CONFIG_NS83820) += ns83820.o
+obj-$(CONFIG_XTENSA_XT2000_SONIC) += xtsonic.o
diff --git a/drivers/net/ethernet/natsemi/jazzsonic.c b/drivers/net/ethernet/natsemi/jazzsonic.c
new file mode 100644
index 000000000..40970352d
--- /dev/null
+++ b/drivers/net/ethernet/natsemi/jazzsonic.c
@@ -0,0 +1,279 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * jazzsonic.c
+ *
+ * (C) 2005 Finn Thain
+ *
+ * Converted to DMA API, and (from the mac68k project) introduced
+ * dhd's support for 16-bit cards.
+ *
+ * (C) 1996,1998 by Thomas Bogendoerfer (tsbogend@alpha.franken.de)
+ *
+ * This driver is based on work from Andreas Busse, but most of
+ * the code is rewritten.
+ *
+ * (C) 1995 by Andreas Busse (andy@waldorf-gmbh.de)
+ *
+ * A driver for the onboard Sonic ethernet controller on Mips Jazz
+ * systems (Acer Pica-61, Mips Magnum 4000, Olivetti M700 and
+ * perhaps others, too)
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/gfp.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/in.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+
+#include <asm/bootinfo.h>
+#include <asm/pgtable.h>
+#include <asm/io.h>
+#include <asm/dma.h>
+#include <asm/jazz.h>
+#include <asm/jazzdma.h>
+
+static char jazz_sonic_string[] = "jazzsonic";
+
+#define SONIC_MEM_SIZE	0x100
+
+#include "sonic.h"
+
+/*
+ * Macros to access SONIC registers
+ */
+#define SONIC_READ(reg) (*((volatile unsigned int *)dev->base_addr+reg))
+
+#define SONIC_WRITE(reg,val)						\
+do {									\
+	*((volatile unsigned int *)dev->base_addr+(reg)) = (val);		\
+} while (0)
+
+/*
+ * We cannot use station (ethernet) address prefixes to detect the
+ * sonic controller since these are board manufacturer depended.
+ * So we check for known Silicon Revision IDs instead.
+ */
+static unsigned short known_revisions[] =
+{
+	0x04,			/* Mips Magnum 4000 */
+	0xffff			/* end of list */
+};
+
+static int jazzsonic_open(struct net_device* dev)
+{
+	int retval;
+
+	retval = request_irq(dev->irq, sonic_interrupt, 0, "sonic", dev);
+	if (retval) {
+		printk(KERN_ERR "%s: unable to get IRQ %d.\n",
+				dev->name, dev->irq);
+		return retval;
+	}
+
+	retval = sonic_open(dev);
+	if (retval)
+		free_irq(dev->irq, dev);
+	return retval;
+}
+
+static int jazzsonic_close(struct net_device* dev)
+{
+	int err;
+	err = sonic_close(dev);
+	free_irq(dev->irq, dev);
+	return err;
+}
+
+static const struct net_device_ops sonic_netdev_ops = {
+	.ndo_open		= jazzsonic_open,
+	.ndo_stop		= jazzsonic_close,
+	.ndo_start_xmit		= sonic_send_packet,
+	.ndo_get_stats		= sonic_get_stats,
+	.ndo_set_rx_mode	= sonic_multicast_list,
+	.ndo_tx_timeout		= sonic_tx_timeout,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+};
+
+static int sonic_probe1(struct net_device *dev)
+{
+	unsigned int silicon_revision;
+	unsigned int val;
+	struct sonic_local *lp = netdev_priv(dev);
+	int err = -ENODEV;
+	int i;
+
+	if (!request_mem_region(dev->base_addr, SONIC_MEM_SIZE, jazz_sonic_string))
+		return -EBUSY;
+
+	/*
+	 * get the Silicon Revision ID. If this is one of the known
+	 * one assume that we found a SONIC ethernet controller at
+	 * the expected location.
+	 */
+	silicon_revision = SONIC_READ(SONIC_SR);
+	i = 0;
+	while (known_revisions[i] != 0xffff &&
+	       known_revisions[i] != silicon_revision)
+		i++;
+
+	if (known_revisions[i] == 0xffff) {
+		pr_info("SONIC ethernet controller not found (0x%4x)\n",
+			silicon_revision);
+		goto out;
+	}
+
+	/*
+	 * Put the sonic into software reset, then
+	 * retrieve and print the ethernet address.
+	 */
+	SONIC_WRITE(SONIC_CMD,SONIC_CR_RST);
+	SONIC_WRITE(SONIC_CEP,0);
+	for (i=0; i<3; i++) {
+		val = SONIC_READ(SONIC_CAP0-i);
+		dev->dev_addr[i*2] = val;
+		dev->dev_addr[i*2+1] = val >> 8;
+	}
+
+	err = -ENOMEM;
+
+	/* Initialize the device structure. */
+
+	lp->dma_bitmode = SONIC_BITMODE32;
+
+	/* Allocate the entire chunk of memory for the descriptors.
+           Note that this cannot cross a 64K boundary. */
+	lp->descriptors = dma_alloc_coherent(lp->device,
+					     SIZEOF_SONIC_DESC *
+					     SONIC_BUS_SCALE(lp->dma_bitmode),
+					     &lp->descriptors_laddr,
+					     GFP_KERNEL);
+	if (lp->descriptors == NULL)
+		goto out;
+
+	/* Now set up the pointers to point to the appropriate places */
+	lp->cda = lp->descriptors;
+	lp->tda = lp->cda + (SIZEOF_SONIC_CDA
+	                     * SONIC_BUS_SCALE(lp->dma_bitmode));
+	lp->rda = lp->tda + (SIZEOF_SONIC_TD * SONIC_NUM_TDS
+	                     * SONIC_BUS_SCALE(lp->dma_bitmode));
+	lp->rra = lp->rda + (SIZEOF_SONIC_RD * SONIC_NUM_RDS
+	                     * SONIC_BUS_SCALE(lp->dma_bitmode));
+
+	lp->cda_laddr = lp->descriptors_laddr;
+	lp->tda_laddr = lp->cda_laddr + (SIZEOF_SONIC_CDA
+	                     * SONIC_BUS_SCALE(lp->dma_bitmode));
+	lp->rda_laddr = lp->tda_laddr + (SIZEOF_SONIC_TD * SONIC_NUM_TDS
+	                     * SONIC_BUS_SCALE(lp->dma_bitmode));
+	lp->rra_laddr = lp->rda_laddr + (SIZEOF_SONIC_RD * SONIC_NUM_RDS
+	                     * SONIC_BUS_SCALE(lp->dma_bitmode));
+
+	dev->netdev_ops = &sonic_netdev_ops;
+	dev->watchdog_timeo = TX_TIMEOUT;
+
+	/*
+	 * clear tally counter
+	 */
+	SONIC_WRITE(SONIC_CRCT,0xffff);
+	SONIC_WRITE(SONIC_FAET,0xffff);
+	SONIC_WRITE(SONIC_MPT,0xffff);
+
+	return 0;
+out:
+	release_mem_region(dev->base_addr, SONIC_MEM_SIZE);
+	return err;
+}
+
+/*
+ * Probe for a SONIC ethernet controller on a Mips Jazz board.
+ * Actually probing is superfluous but we're paranoid.
+ */
+static int jazz_sonic_probe(struct platform_device *pdev)
+{
+	struct net_device *dev;
+	struct sonic_local *lp;
+	struct resource *res;
+	int err = 0;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+
+	dev = alloc_etherdev(sizeof(struct sonic_local));
+	if (!dev)
+		return -ENOMEM;
+
+	lp = netdev_priv(dev);
+	lp->device = &pdev->dev;
+	SET_NETDEV_DEV(dev, &pdev->dev);
+	platform_set_drvdata(pdev, dev);
+
+	netdev_boot_setup_check(dev);
+
+	dev->base_addr = res->start;
+	dev->irq = platform_get_irq(pdev, 0);
+	err = sonic_probe1(dev);
+	if (err)
+		goto out;
+
+	pr_info("SONIC ethernet @%08lx, MAC %pM, IRQ %d\n",
+		dev->base_addr, dev->dev_addr, dev->irq);
+
+	sonic_msg_init(dev);
+
+	err = register_netdev(dev);
+	if (err)
+		goto undo_probe1;
+
+	return 0;
+
+undo_probe1:
+	dma_free_coherent(lp->device, SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode),
+			  lp->descriptors, lp->descriptors_laddr);
+	release_mem_region(dev->base_addr, SONIC_MEM_SIZE);
+out:
+	free_netdev(dev);
+
+	return err;
+}
+
+MODULE_DESCRIPTION("Jazz SONIC ethernet driver");
+MODULE_ALIAS("platform:jazzsonic");
+
+#include "sonic.c"
+
+static int jazz_sonic_device_remove(struct platform_device *pdev)
+{
+	struct net_device *dev = platform_get_drvdata(pdev);
+	struct sonic_local* lp = netdev_priv(dev);
+
+	unregister_netdev(dev);
+	dma_free_coherent(lp->device, SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode),
+	                  lp->descriptors, lp->descriptors_laddr);
+	release_mem_region(dev->base_addr, SONIC_MEM_SIZE);
+	free_netdev(dev);
+
+	return 0;
+}
+
+static struct platform_driver jazz_sonic_driver = {
+	.probe	= jazz_sonic_probe,
+	.remove	= jazz_sonic_device_remove,
+	.driver	= {
+		.name	= jazz_sonic_string,
+	},
+};
+
+module_platform_driver(jazz_sonic_driver);
diff --git a/drivers/net/ethernet/natsemi/macsonic.c b/drivers/net/ethernet/natsemi/macsonic.c
new file mode 100644
index 000000000..23c9394cd
--- /dev/null
+++ b/drivers/net/ethernet/natsemi/macsonic.c
@@ -0,0 +1,680 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * macsonic.c
+ *
+ * (C) 2005 Finn Thain
+ *
+ * Converted to DMA API, converted to unified driver model, made it work as
+ * a module again, and from the mac68k project, introduced more 32-bit cards
+ * and dhd's support for 16-bit cards.
+ *
+ * (C) 1998 Alan Cox
+ *
+ * Debugging Andreas Ehliar, Michael Schmitz
+ *
+ * Based on code
+ * (C) 1996 by Thomas Bogendoerfer (tsbogend@bigbug.franken.de)
+ *
+ * This driver is based on work from Andreas Busse, but most of
+ * the code is rewritten.
+ *
+ * (C) 1995 by Andreas Busse (andy@waldorf-gmbh.de)
+ *
+ * A driver for the Mac onboard Sonic ethernet chip.
+ *
+ * 98/12/21 MSch: judged from tests on Q800, it's basically working,
+ *		  but eating up both receive and transmit resources
+ *		  and duplicating packets. Needs more testing.
+ *
+ * 99/01/03 MSch: upgraded to version 0.92 of the core driver, fixed.
+ *
+ * 00/10/31 sammy@oh.verio.com: Updated driver for 2.4 kernels, fixed problems
+ *          on centris.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/gfp.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/in.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/nubus.h>
+#include <linux/errno.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/bitrev.h>
+#include <linux/slab.h>
+
+#include <asm/pgtable.h>
+#include <asm/io.h>
+#include <asm/hwtest.h>
+#include <asm/dma.h>
+#include <asm/macintosh.h>
+#include <asm/macints.h>
+#include <asm/mac_via.h>
+
+#include "sonic.h"
+
+/* These should basically be bus-size and endian independent (since
+   the SONIC is at least smart enough that it uses the same endianness
+   as the host, unlike certain less enlightened Macintosh NICs) */
+#define SONIC_READ(reg) (nubus_readw(dev->base_addr + (reg * 4) \
+	      + lp->reg_offset))
+#define SONIC_WRITE(reg,val) (nubus_writew(val, dev->base_addr + (reg * 4) \
+	      + lp->reg_offset))
+
+/* For onboard SONIC */
+#define ONBOARD_SONIC_REGISTERS	0x50F0A000
+#define ONBOARD_SONIC_PROM_BASE	0x50f08000
+
+enum macsonic_type {
+	MACSONIC_DUODOCK,
+	MACSONIC_APPLE,
+	MACSONIC_APPLE16,
+	MACSONIC_DAYNA,
+	MACSONIC_DAYNALINK
+};
+
+/* For the built-in SONIC in the Duo Dock */
+#define DUODOCK_SONIC_REGISTERS 0xe10000
+#define DUODOCK_SONIC_PROM_BASE 0xe12000
+
+/* For Apple-style NuBus SONIC */
+#define APPLE_SONIC_REGISTERS	0
+#define APPLE_SONIC_PROM_BASE	0x40000
+
+/* Daynalink LC SONIC */
+#define DAYNALINK_PROM_BASE 0x400000
+
+/* For Dayna-style NuBus SONIC (haven't seen one yet) */
+#define DAYNA_SONIC_REGISTERS   0x180000
+/* This is what OpenBSD says.  However, this is definitely in NuBus
+   ROM space so we should be able to get it by walking the NuBus
+   resource directories */
+#define DAYNA_SONIC_MAC_ADDR	0xffe004
+
+#define SONIC_READ_PROM(addr) nubus_readb(prom_addr+addr)
+
+/*
+ * For reversing the PROM address
+ */
+
+static inline void bit_reverse_addr(unsigned char addr[6])
+{
+	int i;
+
+	for(i = 0; i < 6; i++)
+		addr[i] = bitrev8(addr[i]);
+}
+
+static irqreturn_t macsonic_interrupt(int irq, void *dev_id)
+{
+	irqreturn_t result;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	result = sonic_interrupt(irq, dev_id);
+	local_irq_restore(flags);
+	return result;
+}
+
+static int macsonic_open(struct net_device* dev)
+{
+	int retval;
+
+	retval = request_irq(dev->irq, sonic_interrupt, 0, "sonic", dev);
+	if (retval) {
+		printk(KERN_ERR "%s: unable to get IRQ %d.\n",
+				dev->name, dev->irq);
+		goto err;
+	}
+	/* Under the A/UX interrupt scheme, the onboard SONIC interrupt comes
+	 * in at priority level 3. However, we sometimes get the level 2 inter-
+	 * rupt as well, which must prevent re-entrance of the sonic handler.
+	 */
+	if (dev->irq == IRQ_AUTO_3) {
+		retval = request_irq(IRQ_NUBUS_9, macsonic_interrupt, 0,
+				     "sonic", dev);
+		if (retval) {
+			printk(KERN_ERR "%s: unable to get IRQ %d.\n",
+					dev->name, IRQ_NUBUS_9);
+			goto err_irq;
+		}
+	}
+	retval = sonic_open(dev);
+	if (retval)
+		goto err_irq_nubus;
+	return 0;
+
+err_irq_nubus:
+	if (dev->irq == IRQ_AUTO_3)
+		free_irq(IRQ_NUBUS_9, dev);
+err_irq:
+	free_irq(dev->irq, dev);
+err:
+	return retval;
+}
+
+static int macsonic_close(struct net_device* dev)
+{
+	int err;
+	err = sonic_close(dev);
+	free_irq(dev->irq, dev);
+	if (dev->irq == IRQ_AUTO_3)
+		free_irq(IRQ_NUBUS_9, dev);
+	return err;
+}
+
+static const struct net_device_ops macsonic_netdev_ops = {
+	.ndo_open		= macsonic_open,
+	.ndo_stop		= macsonic_close,
+	.ndo_start_xmit		= sonic_send_packet,
+	.ndo_set_rx_mode	= sonic_multicast_list,
+	.ndo_tx_timeout		= sonic_tx_timeout,
+	.ndo_get_stats		= sonic_get_stats,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+};
+
+static int macsonic_init(struct net_device *dev)
+{
+	struct sonic_local* lp = netdev_priv(dev);
+
+	/* Allocate the entire chunk of memory for the descriptors.
+           Note that this cannot cross a 64K boundary. */
+	lp->descriptors = dma_alloc_coherent(lp->device,
+					     SIZEOF_SONIC_DESC *
+					     SONIC_BUS_SCALE(lp->dma_bitmode),
+					     &lp->descriptors_laddr,
+					     GFP_KERNEL);
+	if (lp->descriptors == NULL)
+		return -ENOMEM;
+
+	/* Now set up the pointers to point to the appropriate places */
+	lp->cda = lp->descriptors;
+	lp->tda = lp->cda + (SIZEOF_SONIC_CDA
+	                     * SONIC_BUS_SCALE(lp->dma_bitmode));
+	lp->rda = lp->tda + (SIZEOF_SONIC_TD * SONIC_NUM_TDS
+	                     * SONIC_BUS_SCALE(lp->dma_bitmode));
+	lp->rra = lp->rda + (SIZEOF_SONIC_RD * SONIC_NUM_RDS
+	                     * SONIC_BUS_SCALE(lp->dma_bitmode));
+
+	lp->cda_laddr = lp->descriptors_laddr;
+	lp->tda_laddr = lp->cda_laddr + (SIZEOF_SONIC_CDA
+	                     * SONIC_BUS_SCALE(lp->dma_bitmode));
+	lp->rda_laddr = lp->tda_laddr + (SIZEOF_SONIC_TD * SONIC_NUM_TDS
+	                     * SONIC_BUS_SCALE(lp->dma_bitmode));
+	lp->rra_laddr = lp->rda_laddr + (SIZEOF_SONIC_RD * SONIC_NUM_RDS
+	                     * SONIC_BUS_SCALE(lp->dma_bitmode));
+
+	dev->netdev_ops = &macsonic_netdev_ops;
+	dev->watchdog_timeo = TX_TIMEOUT;
+
+	/*
+	 * clear tally counter
+	 */
+	SONIC_WRITE(SONIC_CRCT, 0xffff);
+	SONIC_WRITE(SONIC_FAET, 0xffff);
+	SONIC_WRITE(SONIC_MPT, 0xffff);
+
+	return 0;
+}
+
+#define INVALID_MAC(mac) (memcmp(mac, "\x08\x00\x07", 3) && \
+                          memcmp(mac, "\x00\xA0\x40", 3) && \
+                          memcmp(mac, "\x00\x80\x19", 3) && \
+                          memcmp(mac, "\x00\x05\x02", 3))
+
+static void mac_onboard_sonic_ethernet_addr(struct net_device *dev)
+{
+	struct sonic_local *lp = netdev_priv(dev);
+	const int prom_addr = ONBOARD_SONIC_PROM_BASE;
+	unsigned short val;
+
+	/*
+	 * On NuBus boards we can sometimes look in the ROM resources.
+	 * No such luck for comm-slot/onboard.
+	 * On the PowerBook 520, the PROM base address is a mystery.
+	 */
+	if (hwreg_present((void *)prom_addr)) {
+		int i;
+
+		for (i = 0; i < 6; i++)
+			dev->dev_addr[i] = SONIC_READ_PROM(i);
+		if (!INVALID_MAC(dev->dev_addr))
+			return;
+
+		/*
+		 * Most of the time, the address is bit-reversed. The NetBSD
+		 * source has a rather long and detailed historical account of
+		 * why this is so.
+		 */
+		bit_reverse_addr(dev->dev_addr);
+		if (!INVALID_MAC(dev->dev_addr))
+			return;
+
+		/*
+		 * If we still have what seems to be a bogus address, we'll
+		 * look in the CAM. The top entry should be ours.
+		 */
+		printk(KERN_WARNING "macsonic: MAC address in PROM seems "
+		                    "to be invalid, trying CAM\n");
+	} else {
+		printk(KERN_WARNING "macsonic: cannot read MAC address from "
+		                    "PROM, trying CAM\n");
+	}
+
+	/* This only works if MacOS has already initialized the card. */
+
+	SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);
+	SONIC_WRITE(SONIC_CEP, 15);
+
+	val = SONIC_READ(SONIC_CAP2);
+	dev->dev_addr[5] = val >> 8;
+	dev->dev_addr[4] = val & 0xff;
+	val = SONIC_READ(SONIC_CAP1);
+	dev->dev_addr[3] = val >> 8;
+	dev->dev_addr[2] = val & 0xff;
+	val = SONIC_READ(SONIC_CAP0);
+	dev->dev_addr[1] = val >> 8;
+	dev->dev_addr[0] = val & 0xff;
+
+	if (!INVALID_MAC(dev->dev_addr))
+		return;
+
+	/* Still nonsense ... messed up someplace! */
+
+	printk(KERN_WARNING "macsonic: MAC address in CAM entry 15 "
+	                    "seems invalid, will use a random MAC\n");
+	eth_hw_addr_random(dev);
+}
+
+static int mac_onboard_sonic_probe(struct net_device *dev)
+{
+	struct sonic_local* lp = netdev_priv(dev);
+	int sr;
+	bool commslot = macintosh_config->expansion_type == MAC_EXP_PDS_COMM;
+
+	/* Bogus probing, on the models which may or may not have
+	   Ethernet (BTW, the Ethernet *is* always at the same
+	   address, and nothing else lives there, at least if Apple's
+	   documentation is to be believed) */
+	if (commslot || macintosh_config->ident == MAC_MODEL_C610) {
+		int card_present;
+
+		card_present = hwreg_present((void*)ONBOARD_SONIC_REGISTERS);
+		if (!card_present) {
+			pr_info("Onboard/comm-slot SONIC not found\n");
+			return -ENODEV;
+		}
+	}
+
+	/* Danger!  My arms are flailing wildly!  You *must* set lp->reg_offset
+	 * and dev->base_addr before using SONIC_READ() or SONIC_WRITE() */
+	dev->base_addr = ONBOARD_SONIC_REGISTERS;
+	if (via_alt_mapping)
+		dev->irq = IRQ_AUTO_3;
+	else
+		dev->irq = IRQ_NUBUS_9;
+
+	/* The PowerBook's SONIC is 16 bit always. */
+	if (macintosh_config->ident == MAC_MODEL_PB520) {
+		lp->reg_offset = 0;
+		lp->dma_bitmode = SONIC_BITMODE16;
+	} else if (commslot) {
+		/* Some of the comm-slot cards are 16 bit.  But some
+		   of them are not.  The 32-bit cards use offset 2 and
+		   have known revisions, we try reading the revision
+		   register at offset 2, if we don't get a known revision
+		   we assume 16 bit at offset 0.  */
+		lp->reg_offset = 2;
+		lp->dma_bitmode = SONIC_BITMODE16;
+
+		sr = SONIC_READ(SONIC_SR);
+		if (sr == 0x0004 || sr == 0x0006 || sr == 0x0100 || sr == 0x0101)
+			/* 83932 is 0x0004 or 0x0006, 83934 is 0x0100 or 0x0101 */
+			lp->dma_bitmode = SONIC_BITMODE32;
+		else {
+			lp->dma_bitmode = SONIC_BITMODE16;
+			lp->reg_offset = 0;
+		}
+	} else {
+		/* All onboard cards are at offset 2 with 32 bit DMA. */
+		lp->reg_offset = 2;
+		lp->dma_bitmode = SONIC_BITMODE32;
+	}
+
+	pr_info("Onboard/comm-slot SONIC, revision 0x%04x, %d bit DMA, register offset %d\n",
+		SONIC_READ(SONIC_SR), lp->dma_bitmode ? 32 : 16,
+		lp->reg_offset);
+
+	/* This is sometimes useful to find out how MacOS configured the card */
+	pr_debug("%s: DCR=0x%04x, DCR2=0x%04x\n", __func__,
+		 SONIC_READ(SONIC_DCR) & 0xffff,
+		 SONIC_READ(SONIC_DCR2) & 0xffff);
+
+	/* Software reset, then initialize control registers. */
+	SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);
+
+	SONIC_WRITE(SONIC_DCR, SONIC_DCR_EXBUS | SONIC_DCR_BMS |
+	                       SONIC_DCR_RFT1  | SONIC_DCR_TFT0 |
+	                       (lp->dma_bitmode ? SONIC_DCR_DW : 0));
+
+	/* This *must* be written back to in order to restore the
+	 * extended programmable output bits, as it may not have been
+	 * initialised since the hardware reset. */
+	SONIC_WRITE(SONIC_DCR2, 0);
+
+	/* Clear *and* disable interrupts to be on the safe side */
+	SONIC_WRITE(SONIC_IMR, 0);
+	SONIC_WRITE(SONIC_ISR, 0x7fff);
+
+	/* Now look for the MAC address. */
+	mac_onboard_sonic_ethernet_addr(dev);
+
+	pr_info("SONIC ethernet @%08lx, MAC %pM, IRQ %d\n",
+		dev->base_addr, dev->dev_addr, dev->irq);
+
+	/* Shared init code */
+	return macsonic_init(dev);
+}
+
+static int mac_sonic_nubus_ethernet_addr(struct net_device *dev,
+					 unsigned long prom_addr, int id)
+{
+	int i;
+	for(i = 0; i < 6; i++)
+		dev->dev_addr[i] = SONIC_READ_PROM(i);
+
+	/* Some of the addresses are bit-reversed */
+	if (id != MACSONIC_DAYNA)
+		bit_reverse_addr(dev->dev_addr);
+
+	return 0;
+}
+
+static int macsonic_ident(struct nubus_rsrc *fres)
+{
+	if (fres->dr_hw == NUBUS_DRHW_ASANTE_LC &&
+	    fres->dr_sw == NUBUS_DRSW_SONIC_LC)
+		return MACSONIC_DAYNALINK;
+	if (fres->dr_hw == NUBUS_DRHW_SONIC &&
+	    fres->dr_sw == NUBUS_DRSW_APPLE) {
+		/* There has to be a better way to do this... */
+		if (strstr(fres->board->name, "DuoDock"))
+			return MACSONIC_DUODOCK;
+		else
+			return MACSONIC_APPLE;
+	}
+
+	if (fres->dr_hw == NUBUS_DRHW_SMC9194 &&
+	    fres->dr_sw == NUBUS_DRSW_DAYNA)
+		return MACSONIC_DAYNA;
+
+	if (fres->dr_hw == NUBUS_DRHW_APPLE_SONIC_LC &&
+	    fres->dr_sw == 0) { /* huh? */
+		return MACSONIC_APPLE16;
+	}
+	return -1;
+}
+
+static int mac_sonic_nubus_probe_board(struct nubus_board *board, int id,
+				       struct net_device *dev)
+{
+	struct sonic_local* lp = netdev_priv(dev);
+	unsigned long base_addr, prom_addr;
+	u16 sonic_dcr;
+	int reg_offset, dma_bitmode;
+
+	switch (id) {
+	case MACSONIC_DUODOCK:
+		base_addr = board->slot_addr + DUODOCK_SONIC_REGISTERS;
+		prom_addr = board->slot_addr + DUODOCK_SONIC_PROM_BASE;
+		sonic_dcr = SONIC_DCR_EXBUS | SONIC_DCR_RFT0 | SONIC_DCR_RFT1 |
+		            SONIC_DCR_TFT0;
+		reg_offset = 2;
+		dma_bitmode = SONIC_BITMODE32;
+		break;
+	case MACSONIC_APPLE:
+		base_addr = board->slot_addr + APPLE_SONIC_REGISTERS;
+		prom_addr = board->slot_addr + APPLE_SONIC_PROM_BASE;
+		sonic_dcr = SONIC_DCR_BMS | SONIC_DCR_RFT1 | SONIC_DCR_TFT0;
+		reg_offset = 0;
+		dma_bitmode = SONIC_BITMODE32;
+		break;
+	case MACSONIC_APPLE16:
+		base_addr = board->slot_addr + APPLE_SONIC_REGISTERS;
+		prom_addr = board->slot_addr + APPLE_SONIC_PROM_BASE;
+		sonic_dcr = SONIC_DCR_EXBUS | SONIC_DCR_RFT1 | SONIC_DCR_TFT0 |
+		            SONIC_DCR_PO1 | SONIC_DCR_BMS;
+		reg_offset = 0;
+		dma_bitmode = SONIC_BITMODE16;
+		break;
+	case MACSONIC_DAYNALINK:
+		base_addr = board->slot_addr + APPLE_SONIC_REGISTERS;
+		prom_addr = board->slot_addr + DAYNALINK_PROM_BASE;
+		sonic_dcr = SONIC_DCR_RFT1 | SONIC_DCR_TFT0 |
+		            SONIC_DCR_PO1 | SONIC_DCR_BMS;
+		reg_offset = 0;
+		dma_bitmode = SONIC_BITMODE16;
+		break;
+	case MACSONIC_DAYNA:
+		base_addr = board->slot_addr + DAYNA_SONIC_REGISTERS;
+		prom_addr = board->slot_addr + DAYNA_SONIC_MAC_ADDR;
+		sonic_dcr = SONIC_DCR_BMS |
+		            SONIC_DCR_RFT1 | SONIC_DCR_TFT0 | SONIC_DCR_PO1;
+		reg_offset = 0;
+		dma_bitmode = SONIC_BITMODE16;
+		break;
+	default:
+		printk(KERN_ERR "macsonic: WTF, id is %d\n", id);
+		return -ENODEV;
+	}
+
+	/* Danger!  My arms are flailing wildly!  You *must* set lp->reg_offset
+	 * and dev->base_addr before using SONIC_READ() or SONIC_WRITE() */
+	dev->base_addr = base_addr;
+	lp->reg_offset = reg_offset;
+	lp->dma_bitmode = dma_bitmode;
+	dev->irq = SLOT2IRQ(board->slot);
+
+	dev_info(&board->dev, "%s, revision 0x%04x, %d bit DMA, register offset %d\n",
+		 board->name, SONIC_READ(SONIC_SR),
+		 lp->dma_bitmode ? 32 : 16, lp->reg_offset);
+
+	/* This is sometimes useful to find out how MacOS configured the card */
+	dev_dbg(&board->dev, "%s: DCR=0x%04x, DCR2=0x%04x\n", __func__,
+		SONIC_READ(SONIC_DCR) & 0xffff,
+		SONIC_READ(SONIC_DCR2) & 0xffff);
+
+	/* Software reset, then initialize control registers. */
+	SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);
+	SONIC_WRITE(SONIC_DCR, sonic_dcr | (dma_bitmode ? SONIC_DCR_DW : 0));
+	/* This *must* be written back to in order to restore the
+	 * extended programmable output bits, since it may not have been
+	 * initialised since the hardware reset. */
+	SONIC_WRITE(SONIC_DCR2, 0);
+
+	/* Clear *and* disable interrupts to be on the safe side */
+	SONIC_WRITE(SONIC_IMR, 0);
+	SONIC_WRITE(SONIC_ISR, 0x7fff);
+
+	/* Now look for the MAC address. */
+	if (mac_sonic_nubus_ethernet_addr(dev, prom_addr, id) != 0)
+		return -ENODEV;
+
+	dev_info(&board->dev, "SONIC ethernet @%08lx, MAC %pM, IRQ %d\n",
+		 dev->base_addr, dev->dev_addr, dev->irq);
+
+	/* Shared init code */
+	return macsonic_init(dev);
+}
+
+static int mac_sonic_platform_probe(struct platform_device *pdev)
+{
+	struct net_device *dev;
+	struct sonic_local *lp;
+	int err;
+
+	dev = alloc_etherdev(sizeof(struct sonic_local));
+	if (!dev)
+		return -ENOMEM;
+
+	lp = netdev_priv(dev);
+	lp->device = &pdev->dev;
+	SET_NETDEV_DEV(dev, &pdev->dev);
+	platform_set_drvdata(pdev, dev);
+
+	err = mac_onboard_sonic_probe(dev);
+	if (err)
+		goto out;
+
+	sonic_msg_init(dev);
+
+	err = register_netdev(dev);
+	if (err)
+		goto undo_probe;
+
+	return 0;
+
+undo_probe:
+	dma_free_coherent(lp->device,
+			  SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode),
+			  lp->descriptors, lp->descriptors_laddr);
+out:
+	free_netdev(dev);
+
+	return err;
+}
+
+MODULE_DESCRIPTION("Macintosh SONIC ethernet driver");
+MODULE_ALIAS("platform:macsonic");
+
+#include "sonic.c"
+
+static int mac_sonic_platform_remove(struct platform_device *pdev)
+{
+	struct net_device *dev = platform_get_drvdata(pdev);
+	struct sonic_local* lp = netdev_priv(dev);
+
+	unregister_netdev(dev);
+	dma_free_coherent(lp->device, SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode),
+	                  lp->descriptors, lp->descriptors_laddr);
+	free_netdev(dev);
+
+	return 0;
+}
+
+static struct platform_driver mac_sonic_platform_driver = {
+	.probe  = mac_sonic_platform_probe,
+	.remove = mac_sonic_platform_remove,
+	.driver = {
+		.name = "macsonic",
+	},
+};
+
+static int mac_sonic_nubus_probe(struct nubus_board *board)
+{
+	struct net_device *ndev;
+	struct sonic_local *lp;
+	struct nubus_rsrc *fres;
+	int id = -1;
+	int err;
+
+	/* The platform driver will handle a PDS or Comm Slot card (even if
+	 * it has a pseudoslot declaration ROM).
+	 */
+	if (macintosh_config->expansion_type == MAC_EXP_PDS_COMM)
+		return -ENODEV;
+
+	for_each_board_func_rsrc(board, fres) {
+		if (fres->category != NUBUS_CAT_NETWORK ||
+		    fres->type != NUBUS_TYPE_ETHERNET)
+			continue;
+
+		id = macsonic_ident(fres);
+		if (id != -1)
+			break;
+	}
+	if (!fres)
+		return -ENODEV;
+
+	ndev = alloc_etherdev(sizeof(struct sonic_local));
+	if (!ndev)
+		return -ENOMEM;
+
+	lp = netdev_priv(ndev);
+	lp->device = &board->dev;
+	SET_NETDEV_DEV(ndev, &board->dev);
+
+	err = mac_sonic_nubus_probe_board(board, id, ndev);
+	if (err)
+		goto out;
+
+	sonic_msg_init(ndev);
+
+	err = register_netdev(ndev);
+	if (err)
+		goto undo_probe;
+
+	nubus_set_drvdata(board, ndev);
+
+	return 0;
+
+undo_probe:
+	dma_free_coherent(lp->device,
+			  SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode),
+			  lp->descriptors, lp->descriptors_laddr);
+out:
+	free_netdev(ndev);
+	return err;
+}
+
+static int mac_sonic_nubus_remove(struct nubus_board *board)
+{
+	struct net_device *ndev = nubus_get_drvdata(board);
+	struct sonic_local *lp = netdev_priv(ndev);
+
+	unregister_netdev(ndev);
+	dma_free_coherent(lp->device,
+			  SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode),
+			  lp->descriptors, lp->descriptors_laddr);
+	free_netdev(ndev);
+
+	return 0;
+}
+
+static struct nubus_driver mac_sonic_nubus_driver = {
+	.probe  = mac_sonic_nubus_probe,
+	.remove = mac_sonic_nubus_remove,
+	.driver = {
+		.name = "macsonic-nubus",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int perr, nerr;
+
+static int __init mac_sonic_init(void)
+{
+	perr = platform_driver_register(&mac_sonic_platform_driver);
+	nerr = nubus_driver_register(&mac_sonic_nubus_driver);
+	return 0;
+}
+module_init(mac_sonic_init);
+
+static void __exit mac_sonic_exit(void)
+{
+	if (!perr)
+		platform_driver_unregister(&mac_sonic_platform_driver);
+	if (!nerr)
+		nubus_driver_unregister(&mac_sonic_nubus_driver);
+}
+module_exit(mac_sonic_exit);
diff --git a/drivers/net/ethernet/natsemi/natsemi.c b/drivers/net/ethernet/natsemi/natsemi.c
new file mode 100644
index 000000000..039d5dd98
--- /dev/null
+++ b/drivers/net/ethernet/natsemi/natsemi.c
@@ -0,0 +1,3396 @@
+/* natsemi.c: A Linux PCI Ethernet driver for the NatSemi DP8381x series. */
+/*
+	Written/copyright 1999-2001 by Donald Becker.
+	Portions copyright (c) 2001,2002 Sun Microsystems (thockin@sun.com)
+	Portions copyright 2001,2002 Manfred Spraul (manfred@colorfullife.com)
+	Portions copyright 2004 Harald Welte <laforge@gnumonks.org>
+
+	This software may be used and distributed according to the terms of
+	the GNU General Public License (GPL), incorporated herein by reference.
+	Drivers based on or derived from this code fall under the GPL and must
+	retain the authorship, copyright and license notice.  This file is not
+	a complete program and may only be used when the entire operating
+	system is licensed under the GPL.  License for under other terms may be
+	available.  Contact the original author for details.
+
+	The original author may be reached as becker@scyld.com, or at
+	Scyld Computing Corporation
+	410 Severn Ave., Suite 210
+	Annapolis MD 21403
+
+	Support information and updates available at
+	http://www.scyld.com/network/netsemi.html
+	[link no longer provides useful info -jgarzik]
+
+
+	TODO:
+	* big endian support with CFG:BEM instead of cpu_to_le32
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/ethtool.h>
+#include <linux/delay.h>
+#include <linux/rtnetlink.h>
+#include <linux/mii.h>
+#include <linux/crc32.h>
+#include <linux/bitops.h>
+#include <linux/prefetch.h>
+#include <asm/processor.h>	/* Processor type for cache alignment. */
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <linux/uaccess.h>
+
+#define DRV_NAME	"natsemi"
+#define DRV_VERSION	"2.1"
+#define DRV_RELDATE	"Sept 11, 2006"
+
+#define RX_OFFSET	2
+
+/* Updated to recommendations in pci-skeleton v2.03. */
+
+/* The user-configurable values.
+   These may be modified when a driver module is loaded.*/
+
+#define NATSEMI_DEF_MSG		(NETIF_MSG_DRV		| \
+				 NETIF_MSG_LINK		| \
+				 NETIF_MSG_WOL		| \
+				 NETIF_MSG_RX_ERR	| \
+				 NETIF_MSG_TX_ERR)
+static int debug = -1;
+
+static int mtu;
+
+/* Maximum number of multicast addresses to filter (vs. rx-all-multicast).
+   This chip uses a 512 element hash table based on the Ethernet CRC.  */
+static const int multicast_filter_limit = 100;
+
+/* Set the copy breakpoint for the copy-only-tiny-frames scheme.
+   Setting to > 1518 effectively disables this feature. */
+static int rx_copybreak;
+
+static int dspcfg_workaround = 1;
+
+/* Used to pass the media type, etc.
+   Both 'options[]' and 'full_duplex[]' should exist for driver
+   interoperability.
+   The media type is usually passed in 'options[]'.
+*/
+#define MAX_UNITS 8		/* More are supported, limit only on options */
+static int options[MAX_UNITS];
+static int full_duplex[MAX_UNITS];
+
+/* Operational parameters that are set at compile time. */
+
+/* Keep the ring sizes a power of two for compile efficiency.
+   The compiler will convert <unsigned>'%'<2^N> into a bit mask.
+   Making the Tx ring too large decreases the effectiveness of channel
+   bonding and packet priority.
+   There are no ill effects from too-large receive rings. */
+#define TX_RING_SIZE	16
+#define TX_QUEUE_LEN	10 /* Limit ring entries actually used, min 4. */
+#define RX_RING_SIZE	32
+
+/* Operational parameters that usually are not changed. */
+/* Time in jiffies before concluding the transmitter is hung. */
+#define TX_TIMEOUT  (2*HZ)
+
+#define NATSEMI_HW_TIMEOUT	400
+#define NATSEMI_TIMER_FREQ	5*HZ
+#define NATSEMI_PG0_NREGS	64
+#define NATSEMI_RFDR_NREGS	8
+#define NATSEMI_PG1_NREGS	4
+#define NATSEMI_NREGS		(NATSEMI_PG0_NREGS + NATSEMI_RFDR_NREGS + \
+				 NATSEMI_PG1_NREGS)
+#define NATSEMI_REGS_VER	1 /* v1 added RFDR registers */
+#define NATSEMI_REGS_SIZE	(NATSEMI_NREGS * sizeof(u32))
+
+/* Buffer sizes:
+ * The nic writes 32-bit values, even if the upper bytes of
+ * a 32-bit value are beyond the end of the buffer.
+ */
+#define NATSEMI_HEADERS		22	/* 2*mac,type,vlan,crc */
+#define NATSEMI_PADDING		16	/* 2 bytes should be sufficient */
+#define NATSEMI_LONGPKT		1518	/* limit for normal packets */
+#define NATSEMI_RX_LIMIT	2046	/* maximum supported by hardware */
+
+/* These identify the driver base version and may not be removed. */
+static const char version[] =
+  KERN_INFO DRV_NAME " dp8381x driver, version "
+      DRV_VERSION ", " DRV_RELDATE "\n"
+  "  originally by Donald Becker <becker@scyld.com>\n"
+  "  2.4.x kernel port by Jeff Garzik, Tjeerd Mulder\n";
+
+MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
+MODULE_DESCRIPTION("National Semiconductor DP8381x series PCI Ethernet driver");
+MODULE_LICENSE("GPL");
+
+module_param(mtu, int, 0);
+module_param(debug, int, 0);
+module_param(rx_copybreak, int, 0);
+module_param(dspcfg_workaround, int, 0);
+module_param_array(options, int, NULL, 0);
+module_param_array(full_duplex, int, NULL, 0);
+MODULE_PARM_DESC(mtu, "DP8381x MTU (all boards)");
+MODULE_PARM_DESC(debug, "DP8381x default debug level");
+MODULE_PARM_DESC(rx_copybreak,
+	"DP8381x copy breakpoint for copy-only-tiny-frames");
+MODULE_PARM_DESC(dspcfg_workaround, "DP8381x: control DspCfg workaround");
+MODULE_PARM_DESC(options,
+	"DP8381x: Bits 0-3: media type, bit 17: full duplex");
+MODULE_PARM_DESC(full_duplex, "DP8381x full duplex setting(s) (1)");
+
+/*
+				Theory of Operation
+
+I. Board Compatibility
+
+This driver is designed for National Semiconductor DP83815 PCI Ethernet NIC.
+It also works with other chips in in the DP83810 series.
+
+II. Board-specific settings
+
+This driver requires the PCI interrupt line to be valid.
+It honors the EEPROM-set values.
+
+III. Driver operation
+
+IIIa. Ring buffers
+
+This driver uses two statically allocated fixed-size descriptor lists
+formed into rings by a branch from the final descriptor to the beginning of
+the list.  The ring sizes are set at compile time by RX/TX_RING_SIZE.
+The NatSemi design uses a 'next descriptor' pointer that the driver forms
+into a list.
+
+IIIb/c. Transmit/Receive Structure
+
+This driver uses a zero-copy receive and transmit scheme.
+The driver allocates full frame size skbuffs for the Rx ring buffers at
+open() time and passes the skb->data field to the chip as receive data
+buffers.  When an incoming frame is less than RX_COPYBREAK bytes long,
+a fresh skbuff is allocated and the frame is copied to the new skbuff.
+When the incoming frame is larger, the skbuff is passed directly up the
+protocol stack.  Buffers consumed this way are replaced by newly allocated
+skbuffs in a later phase of receives.
+
+The RX_COPYBREAK value is chosen to trade-off the memory wasted by
+using a full-sized skbuff for small frames vs. the copying costs of larger
+frames.  New boards are typically used in generously configured machines
+and the underfilled buffers have negligible impact compared to the benefit of
+a single allocation size, so the default value of zero results in never
+copying packets.  When copying is done, the cost is usually mitigated by using
+a combined copy/checksum routine.  Copying also preloads the cache, which is
+most useful with small frames.
+
+A subtle aspect of the operation is that unaligned buffers are not permitted
+by the hardware.  Thus the IP header at offset 14 in an ethernet frame isn't
+longword aligned for further processing.  On copies frames are put into the
+skbuff at an offset of "+2", 16-byte aligning the IP header.
+
+IIId. Synchronization
+
+Most operations are synchronized on the np->lock irq spinlock, except the
+receive and transmit paths which are synchronised using a combination of
+hardware descriptor ownership, disabling interrupts and NAPI poll scheduling.
+
+IVb. References
+
+http://www.scyld.com/expert/100mbps.html
+http://www.scyld.com/expert/NWay.html
+Datasheet is available from:
+http://www.national.com/pf/DP/DP83815.html
+
+IVc. Errata
+
+None characterised.
+*/
+
+
+
+/*
+ * Support for fibre connections on Am79C874:
+ * This phy needs a special setup when connected to a fibre cable.
+ * http://www.amd.com/files/connectivitysolutions/networking/archivednetworking/22235.pdf
+ */
+#define PHYID_AM79C874	0x0022561b
+
+enum {
+	MII_MCTRL	= 0x15,		/* mode control register */
+	MII_FX_SEL	= 0x0001,	/* 100BASE-FX (fiber) */
+	MII_EN_SCRM	= 0x0004,	/* enable scrambler (tp) */
+};
+
+enum {
+	NATSEMI_FLAG_IGNORE_PHY		= 0x1,
+};
+
+/* array of board data directly indexed by pci_tbl[x].driver_data */
+static struct {
+	const char *name;
+	unsigned long flags;
+	unsigned int eeprom_size;
+} natsemi_pci_info[] = {
+	{ "Aculab E1/T1 PMXc cPCI carrier card", NATSEMI_FLAG_IGNORE_PHY, 128 },
+	{ "NatSemi DP8381[56]", 0, 24 },
+};
+
+static const struct pci_device_id natsemi_pci_tbl[] = {
+	{ PCI_VENDOR_ID_NS, 0x0020, 0x12d9,     0x000c,     0, 0, 0 },
+	{ PCI_VENDOR_ID_NS, 0x0020, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 },
+	{ }	/* terminate list */
+};
+MODULE_DEVICE_TABLE(pci, natsemi_pci_tbl);
+
+/* Offsets to the device registers.
+   Unlike software-only systems, device drivers interact with complex hardware.
+   It's not useful to define symbolic names for every register bit in the
+   device.
+*/
+enum register_offsets {
+	ChipCmd			= 0x00,
+	ChipConfig		= 0x04,
+	EECtrl			= 0x08,
+	PCIBusCfg		= 0x0C,
+	IntrStatus		= 0x10,
+	IntrMask		= 0x14,
+	IntrEnable		= 0x18,
+	IntrHoldoff		= 0x1C, /* DP83816 only */
+	TxRingPtr		= 0x20,
+	TxConfig		= 0x24,
+	RxRingPtr		= 0x30,
+	RxConfig		= 0x34,
+	ClkRun			= 0x3C,
+	WOLCmd			= 0x40,
+	PauseCmd		= 0x44,
+	RxFilterAddr		= 0x48,
+	RxFilterData		= 0x4C,
+	BootRomAddr		= 0x50,
+	BootRomData		= 0x54,
+	SiliconRev		= 0x58,
+	StatsCtrl		= 0x5C,
+	StatsData		= 0x60,
+	RxPktErrs		= 0x60,
+	RxMissed		= 0x68,
+	RxCRCErrs		= 0x64,
+	BasicControl		= 0x80,
+	BasicStatus		= 0x84,
+	AnegAdv			= 0x90,
+	AnegPeer		= 0x94,
+	PhyStatus		= 0xC0,
+	MIntrCtrl		= 0xC4,
+	MIntrStatus		= 0xC8,
+	PhyCtrl			= 0xE4,
+
+	/* These are from the spec, around page 78... on a separate table.
+	 * The meaning of these registers depend on the value of PGSEL. */
+	PGSEL			= 0xCC,
+	PMDCSR			= 0xE4,
+	TSTDAT			= 0xFC,
+	DSPCFG			= 0xF4,
+	SDCFG			= 0xF8
+};
+/* the values for the 'magic' registers above (PGSEL=1) */
+#define PMDCSR_VAL	0x189c	/* enable preferred adaptation circuitry */
+#define TSTDAT_VAL	0x0
+#define DSPCFG_VAL	0x5040
+#define SDCFG_VAL	0x008c	/* set voltage thresholds for Signal Detect */
+#define DSPCFG_LOCK	0x20	/* coefficient lock bit in DSPCFG */
+#define DSPCFG_COEF	0x1000	/* see coefficient (in TSTDAT) bit in DSPCFG */
+#define TSTDAT_FIXED	0xe8	/* magic number for bad coefficients */
+
+/* misc PCI space registers */
+enum pci_register_offsets {
+	PCIPM			= 0x44,
+};
+
+enum ChipCmd_bits {
+	ChipReset		= 0x100,
+	RxReset			= 0x20,
+	TxReset			= 0x10,
+	RxOff			= 0x08,
+	RxOn			= 0x04,
+	TxOff			= 0x02,
+	TxOn			= 0x01,
+};
+
+enum ChipConfig_bits {
+	CfgPhyDis		= 0x200,
+	CfgPhyRst		= 0x400,
+	CfgExtPhy		= 0x1000,
+	CfgAnegEnable		= 0x2000,
+	CfgAneg100		= 0x4000,
+	CfgAnegFull		= 0x8000,
+	CfgAnegDone		= 0x8000000,
+	CfgFullDuplex		= 0x20000000,
+	CfgSpeed100		= 0x40000000,
+	CfgLink			= 0x80000000,
+};
+
+enum EECtrl_bits {
+	EE_ShiftClk		= 0x04,
+	EE_DataIn		= 0x01,
+	EE_ChipSelect		= 0x08,
+	EE_DataOut		= 0x02,
+	MII_Data 		= 0x10,
+	MII_Write		= 0x20,
+	MII_ShiftClk		= 0x40,
+};
+
+enum PCIBusCfg_bits {
+	EepromReload		= 0x4,
+};
+
+/* Bits in the interrupt status/mask registers. */
+enum IntrStatus_bits {
+	IntrRxDone		= 0x0001,
+	IntrRxIntr		= 0x0002,
+	IntrRxErr		= 0x0004,
+	IntrRxEarly		= 0x0008,
+	IntrRxIdle		= 0x0010,
+	IntrRxOverrun		= 0x0020,
+	IntrTxDone		= 0x0040,
+	IntrTxIntr		= 0x0080,
+	IntrTxErr		= 0x0100,
+	IntrTxIdle		= 0x0200,
+	IntrTxUnderrun		= 0x0400,
+	StatsMax		= 0x0800,
+	SWInt			= 0x1000,
+	WOLPkt			= 0x2000,
+	LinkChange		= 0x4000,
+	IntrHighBits		= 0x8000,
+	RxStatusFIFOOver	= 0x10000,
+	IntrPCIErr		= 0xf00000,
+	RxResetDone		= 0x1000000,
+	TxResetDone		= 0x2000000,
+	IntrAbnormalSummary	= 0xCD20,
+};
+
+/*
+ * Default Interrupts:
+ * Rx OK, Rx Packet Error, Rx Overrun,
+ * Tx OK, Tx Packet Error, Tx Underrun,
+ * MIB Service, Phy Interrupt, High Bits,
+ * Rx Status FIFO overrun,
+ * Received Target Abort, Received Master Abort,
+ * Signalled System Error, Received Parity Error
+ */
+#define DEFAULT_INTR 0x00f1cd65
+
+enum TxConfig_bits {
+	TxDrthMask		= 0x3f,
+	TxFlthMask		= 0x3f00,
+	TxMxdmaMask		= 0x700000,
+	TxMxdma_512		= 0x0,
+	TxMxdma_4		= 0x100000,
+	TxMxdma_8		= 0x200000,
+	TxMxdma_16		= 0x300000,
+	TxMxdma_32		= 0x400000,
+	TxMxdma_64		= 0x500000,
+	TxMxdma_128		= 0x600000,
+	TxMxdma_256		= 0x700000,
+	TxCollRetry		= 0x800000,
+	TxAutoPad		= 0x10000000,
+	TxMacLoop		= 0x20000000,
+	TxHeartIgn		= 0x40000000,
+	TxCarrierIgn		= 0x80000000
+};
+
+/*
+ * Tx Configuration:
+ * - 256 byte DMA burst length
+ * - fill threshold 512 bytes (i.e. restart DMA when 512 bytes are free)
+ * - 64 bytes initial drain threshold (i.e. begin actual transmission
+ *   when 64 byte are in the fifo)
+ * - on tx underruns, increase drain threshold by 64.
+ * - at most use a drain threshold of 1472 bytes: The sum of the fill
+ *   threshold and the drain threshold must be less than 2016 bytes.
+ *
+ */
+#define TX_FLTH_VAL		((512/32) << 8)
+#define TX_DRTH_VAL_START	(64/32)
+#define TX_DRTH_VAL_INC		2
+#define TX_DRTH_VAL_LIMIT	(1472/32)
+
+enum RxConfig_bits {
+	RxDrthMask		= 0x3e,
+	RxMxdmaMask		= 0x700000,
+	RxMxdma_512		= 0x0,
+	RxMxdma_4		= 0x100000,
+	RxMxdma_8		= 0x200000,
+	RxMxdma_16		= 0x300000,
+	RxMxdma_32		= 0x400000,
+	RxMxdma_64		= 0x500000,
+	RxMxdma_128		= 0x600000,
+	RxMxdma_256		= 0x700000,
+	RxAcceptLong		= 0x8000000,
+	RxAcceptTx		= 0x10000000,
+	RxAcceptRunt		= 0x40000000,
+	RxAcceptErr		= 0x80000000
+};
+#define RX_DRTH_VAL		(128/8)
+
+enum ClkRun_bits {
+	PMEEnable		= 0x100,
+	PMEStatus		= 0x8000,
+};
+
+enum WolCmd_bits {
+	WakePhy			= 0x1,
+	WakeUnicast		= 0x2,
+	WakeMulticast		= 0x4,
+	WakeBroadcast		= 0x8,
+	WakeArp			= 0x10,
+	WakePMatch0		= 0x20,
+	WakePMatch1		= 0x40,
+	WakePMatch2		= 0x80,
+	WakePMatch3		= 0x100,
+	WakeMagic		= 0x200,
+	WakeMagicSecure		= 0x400,
+	SecureHack		= 0x100000,
+	WokePhy			= 0x400000,
+	WokeUnicast		= 0x800000,
+	WokeMulticast		= 0x1000000,
+	WokeBroadcast		= 0x2000000,
+	WokeArp			= 0x4000000,
+	WokePMatch0		= 0x8000000,
+	WokePMatch1		= 0x10000000,
+	WokePMatch2		= 0x20000000,
+	WokePMatch3		= 0x40000000,
+	WokeMagic		= 0x80000000,
+	WakeOptsSummary		= 0x7ff
+};
+
+enum RxFilterAddr_bits {
+	RFCRAddressMask		= 0x3ff,
+	AcceptMulticast		= 0x00200000,
+	AcceptMyPhys		= 0x08000000,
+	AcceptAllPhys		= 0x10000000,
+	AcceptAllMulticast	= 0x20000000,
+	AcceptBroadcast		= 0x40000000,
+	RxFilterEnable		= 0x80000000
+};
+
+enum StatsCtrl_bits {
+	StatsWarn		= 0x1,
+	StatsFreeze		= 0x2,
+	StatsClear		= 0x4,
+	StatsStrobe		= 0x8,
+};
+
+enum MIntrCtrl_bits {
+	MICRIntEn		= 0x2,
+};
+
+enum PhyCtrl_bits {
+	PhyAddrMask		= 0x1f,
+};
+
+#define PHY_ADDR_NONE		32
+#define PHY_ADDR_INTERNAL	1
+
+/* values we might find in the silicon revision register */
+#define SRR_DP83815_C	0x0302
+#define SRR_DP83815_D	0x0403
+#define SRR_DP83816_A4	0x0504
+#define SRR_DP83816_A5	0x0505
+
+/* The Rx and Tx buffer descriptors. */
+/* Note that using only 32 bit fields simplifies conversion to big-endian
+   architectures. */
+struct netdev_desc {
+	__le32 next_desc;
+	__le32 cmd_status;
+	__le32 addr;
+	__le32 software_use;
+};
+
+/* Bits in network_desc.status */
+enum desc_status_bits {
+	DescOwn=0x80000000, DescMore=0x40000000, DescIntr=0x20000000,
+	DescNoCRC=0x10000000, DescPktOK=0x08000000,
+	DescSizeMask=0xfff,
+
+	DescTxAbort=0x04000000, DescTxFIFO=0x02000000,
+	DescTxCarrier=0x01000000, DescTxDefer=0x00800000,
+	DescTxExcDefer=0x00400000, DescTxOOWCol=0x00200000,
+	DescTxExcColl=0x00100000, DescTxCollCount=0x000f0000,
+
+	DescRxAbort=0x04000000, DescRxOver=0x02000000,
+	DescRxDest=0x01800000, DescRxLong=0x00400000,
+	DescRxRunt=0x00200000, DescRxInvalid=0x00100000,
+	DescRxCRC=0x00080000, DescRxAlign=0x00040000,
+	DescRxLoop=0x00020000, DesRxColl=0x00010000,
+};
+
+struct netdev_private {
+	/* Descriptor rings first for alignment */
+	dma_addr_t ring_dma;
+	struct netdev_desc *rx_ring;
+	struct netdev_desc *tx_ring;
+	/* The addresses of receive-in-place skbuffs */
+	struct sk_buff *rx_skbuff[RX_RING_SIZE];
+	dma_addr_t rx_dma[RX_RING_SIZE];
+	/* address of a sent-in-place packet/buffer, for later free() */
+	struct sk_buff *tx_skbuff[TX_RING_SIZE];
+	dma_addr_t tx_dma[TX_RING_SIZE];
+	struct net_device *dev;
+	void __iomem *ioaddr;
+	struct napi_struct napi;
+	/* Media monitoring timer */
+	struct timer_list timer;
+	/* Frequently used values: keep some adjacent for cache effect */
+	struct pci_dev *pci_dev;
+	struct netdev_desc *rx_head_desc;
+	/* Producer/consumer ring indices */
+	unsigned int cur_rx, dirty_rx;
+	unsigned int cur_tx, dirty_tx;
+	/* Based on MTU+slack. */
+	unsigned int rx_buf_sz;
+	int oom;
+	/* Interrupt status */
+	u32 intr_status;
+	/* Do not touch the nic registers */
+	int hands_off;
+	/* Don't pay attention to the reported link state. */
+	int ignore_phy;
+	/* external phy that is used: only valid if dev->if_port != PORT_TP */
+	int mii;
+	int phy_addr_external;
+	unsigned int full_duplex;
+	/* Rx filter */
+	u32 cur_rx_mode;
+	u32 rx_filter[16];
+	/* FIFO and PCI burst thresholds */
+	u32 tx_config, rx_config;
+	/* original contents of ClkRun register */
+	u32 SavedClkRun;
+	/* silicon revision */
+	u32 srr;
+	/* expected DSPCFG value */
+	u16 dspcfg;
+	int dspcfg_workaround;
+	/* parms saved in ethtool format */
+	u16	speed;		/* The forced speed, 10Mb, 100Mb, gigabit */
+	u8	duplex;		/* Duplex, half or full */
+	u8	autoneg;	/* Autonegotiation enabled */
+	/* MII transceiver section */
+	u16 advertising;
+	unsigned int iosize;
+	spinlock_t lock;
+	u32 msg_enable;
+	/* EEPROM data */
+	int eeprom_size;
+};
+
+static void move_int_phy(struct net_device *dev, int addr);
+static int eeprom_read(void __iomem *ioaddr, int location);
+static int mdio_read(struct net_device *dev, int reg);
+static void mdio_write(struct net_device *dev, int reg, u16 data);
+static void init_phy_fixup(struct net_device *dev);
+static int miiport_read(struct net_device *dev, int phy_id, int reg);
+static void miiport_write(struct net_device *dev, int phy_id, int reg, u16 data);
+static int find_mii(struct net_device *dev);
+static void natsemi_reset(struct net_device *dev);
+static void natsemi_reload_eeprom(struct net_device *dev);
+static void natsemi_stop_rxtx(struct net_device *dev);
+static int netdev_open(struct net_device *dev);
+static void do_cable_magic(struct net_device *dev);
+static void undo_cable_magic(struct net_device *dev);
+static void check_link(struct net_device *dev);
+static void netdev_timer(struct timer_list *t);
+static void dump_ring(struct net_device *dev);
+static void ns_tx_timeout(struct net_device *dev);
+static int alloc_ring(struct net_device *dev);
+static void refill_rx(struct net_device *dev);
+static void init_ring(struct net_device *dev);
+static void drain_tx(struct net_device *dev);
+static void drain_ring(struct net_device *dev);
+static void free_ring(struct net_device *dev);
+static void reinit_ring(struct net_device *dev);
+static void init_registers(struct net_device *dev);
+static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev);
+static irqreturn_t intr_handler(int irq, void *dev_instance);
+static void netdev_error(struct net_device *dev, int intr_status);
+static int natsemi_poll(struct napi_struct *napi, int budget);
+static void netdev_rx(struct net_device *dev, int *work_done, int work_to_do);
+static void netdev_tx_done(struct net_device *dev);
+static int natsemi_change_mtu(struct net_device *dev, int new_mtu);
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void natsemi_poll_controller(struct net_device *dev);
+#endif
+static void __set_rx_mode(struct net_device *dev);
+static void set_rx_mode(struct net_device *dev);
+static void __get_stats(struct net_device *dev);
+static struct net_device_stats *get_stats(struct net_device *dev);
+static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+static int netdev_set_wol(struct net_device *dev, u32 newval);
+static int netdev_get_wol(struct net_device *dev, u32 *supported, u32 *cur);
+static int netdev_set_sopass(struct net_device *dev, u8 *newval);
+static int netdev_get_sopass(struct net_device *dev, u8 *data);
+static int netdev_get_ecmd(struct net_device *dev,
+			   struct ethtool_link_ksettings *ecmd);
+static int netdev_set_ecmd(struct net_device *dev,
+			   const struct ethtool_link_ksettings *ecmd);
+static void enable_wol_mode(struct net_device *dev, int enable_intr);
+static int netdev_close(struct net_device *dev);
+static int netdev_get_regs(struct net_device *dev, u8 *buf);
+static int netdev_get_eeprom(struct net_device *dev, u8 *buf);
+static const struct ethtool_ops ethtool_ops;
+
+#define NATSEMI_ATTR(_name) \
+static ssize_t natsemi_show_##_name(struct device *dev, \
+         struct device_attribute *attr, char *buf); \
+	 static ssize_t natsemi_set_##_name(struct device *dev, \
+		struct device_attribute *attr, \
+	        const char *buf, size_t count); \
+	 static DEVICE_ATTR(_name, 0644, natsemi_show_##_name, natsemi_set_##_name)
+
+#define NATSEMI_CREATE_FILE(_dev, _name) \
+         device_create_file(&_dev->dev, &dev_attr_##_name)
+#define NATSEMI_REMOVE_FILE(_dev, _name) \
+         device_remove_file(&_dev->dev, &dev_attr_##_name)
+
+NATSEMI_ATTR(dspcfg_workaround);
+
+static ssize_t natsemi_show_dspcfg_workaround(struct device *dev,
+				  	      struct device_attribute *attr,
+					      char *buf)
+{
+	struct netdev_private *np = netdev_priv(to_net_dev(dev));
+
+	return sprintf(buf, "%s\n", np->dspcfg_workaround ? "on" : "off");
+}
+
+static ssize_t natsemi_set_dspcfg_workaround(struct device *dev,
+					     struct device_attribute *attr,
+					     const char *buf, size_t count)
+{
+	struct netdev_private *np = netdev_priv(to_net_dev(dev));
+	int new_setting;
+	unsigned long flags;
+
+        /* Find out the new setting */
+        if (!strncmp("on", buf, count - 1) || !strncmp("1", buf, count - 1))
+                new_setting = 1;
+        else if (!strncmp("off", buf, count - 1) ||
+                 !strncmp("0", buf, count - 1))
+		new_setting = 0;
+	else
+                 return count;
+
+	spin_lock_irqsave(&np->lock, flags);
+
+	np->dspcfg_workaround = new_setting;
+
+	spin_unlock_irqrestore(&np->lock, flags);
+
+	return count;
+}
+
+static inline void __iomem *ns_ioaddr(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+
+	return np->ioaddr;
+}
+
+static inline void natsemi_irq_enable(struct net_device *dev)
+{
+	writel(1, ns_ioaddr(dev) + IntrEnable);
+	readl(ns_ioaddr(dev) + IntrEnable);
+}
+
+static inline void natsemi_irq_disable(struct net_device *dev)
+{
+	writel(0, ns_ioaddr(dev) + IntrEnable);
+	readl(ns_ioaddr(dev) + IntrEnable);
+}
+
+static void move_int_phy(struct net_device *dev, int addr)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem *ioaddr = ns_ioaddr(dev);
+	int target = 31;
+
+	/*
+	 * The internal phy is visible on the external mii bus. Therefore we must
+	 * move it away before we can send commands to an external phy.
+	 * There are two addresses we must avoid:
+	 * - the address on the external phy that is used for transmission.
+	 * - the address that we want to access. User space can access phys
+	 *   on the mii bus with SIOCGMIIREG/SIOCSMIIREG, independent from the
+	 *   phy that is used for transmission.
+	 */
+
+	if (target == addr)
+		target--;
+	if (target == np->phy_addr_external)
+		target--;
+	writew(target, ioaddr + PhyCtrl);
+	readw(ioaddr + PhyCtrl);
+	udelay(1);
+}
+
+static void natsemi_init_media(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	u32 tmp;
+
+	if (np->ignore_phy)
+		netif_carrier_on(dev);
+	else
+		netif_carrier_off(dev);
+
+	/* get the initial settings from hardware */
+	tmp            = mdio_read(dev, MII_BMCR);
+	np->speed      = (tmp & BMCR_SPEED100)? SPEED_100     : SPEED_10;
+	np->duplex     = (tmp & BMCR_FULLDPLX)? DUPLEX_FULL   : DUPLEX_HALF;
+	np->autoneg    = (tmp & BMCR_ANENABLE)? AUTONEG_ENABLE: AUTONEG_DISABLE;
+	np->advertising= mdio_read(dev, MII_ADVERTISE);
+
+	if ((np->advertising & ADVERTISE_ALL) != ADVERTISE_ALL &&
+	    netif_msg_probe(np)) {
+		printk(KERN_INFO "natsemi %s: Transceiver default autonegotiation %s "
+			"10%s %s duplex.\n",
+			pci_name(np->pci_dev),
+			(mdio_read(dev, MII_BMCR) & BMCR_ANENABLE)?
+			  "enabled, advertise" : "disabled, force",
+			(np->advertising &
+			  (ADVERTISE_100FULL|ADVERTISE_100HALF))?
+			    "0" : "",
+			(np->advertising &
+			  (ADVERTISE_100FULL|ADVERTISE_10FULL))?
+			    "full" : "half");
+	}
+	if (netif_msg_probe(np))
+		printk(KERN_INFO
+			"natsemi %s: Transceiver status %#04x advertising %#04x.\n",
+			pci_name(np->pci_dev), mdio_read(dev, MII_BMSR),
+			np->advertising);
+
+}
+
+static const struct net_device_ops natsemi_netdev_ops = {
+	.ndo_open		= netdev_open,
+	.ndo_stop		= netdev_close,
+	.ndo_start_xmit		= start_tx,
+	.ndo_get_stats		= get_stats,
+	.ndo_set_rx_mode	= set_rx_mode,
+	.ndo_change_mtu		= natsemi_change_mtu,
+	.ndo_do_ioctl		= netdev_ioctl,
+	.ndo_tx_timeout 	= ns_tx_timeout,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= natsemi_poll_controller,
+#endif
+};
+
+static int natsemi_probe1(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	struct net_device *dev;
+	struct netdev_private *np;
+	int i, option, irq, chip_idx = ent->driver_data;
+	static int find_cnt = -1;
+	resource_size_t iostart;
+	unsigned long iosize;
+	void __iomem *ioaddr;
+	const int pcibar = 1; /* PCI base address register */
+	int prev_eedata;
+	u32 tmp;
+
+/* when built into the kernel, we only print version if device is found */
+#ifndef MODULE
+	static int printed_version;
+	if (!printed_version++)
+		printk(version);
+#endif
+
+	i = pcim_enable_device(pdev);
+	if (i) return i;
+
+	/* natsemi has a non-standard PM control register
+	 * in PCI config space.  Some boards apparently need
+	 * to be brought to D0 in this manner.
+	 */
+	pci_read_config_dword(pdev, PCIPM, &tmp);
+	if (tmp & PCI_PM_CTRL_STATE_MASK) {
+		/* D0 state, disable PME assertion */
+		u32 newtmp = tmp & ~PCI_PM_CTRL_STATE_MASK;
+		pci_write_config_dword(pdev, PCIPM, newtmp);
+	}
+
+	find_cnt++;
+	iostart = pci_resource_start(pdev, pcibar);
+	iosize = pci_resource_len(pdev, pcibar);
+	irq = pdev->irq;
+
+	pci_set_master(pdev);
+
+	dev = alloc_etherdev(sizeof (struct netdev_private));
+	if (!dev)
+		return -ENOMEM;
+	SET_NETDEV_DEV(dev, &pdev->dev);
+
+	i = pci_request_regions(pdev, DRV_NAME);
+	if (i)
+		goto err_pci_request_regions;
+
+	ioaddr = ioremap(iostart, iosize);
+	if (!ioaddr) {
+		i = -ENOMEM;
+		goto err_pci_request_regions;
+	}
+
+	/* Work around the dropped serial bit. */
+	prev_eedata = eeprom_read(ioaddr, 6);
+	for (i = 0; i < 3; i++) {
+		int eedata = eeprom_read(ioaddr, i + 7);
+		dev->dev_addr[i*2] = (eedata << 1) + (prev_eedata >> 15);
+		dev->dev_addr[i*2+1] = eedata >> 7;
+		prev_eedata = eedata;
+	}
+
+	np = netdev_priv(dev);
+	np->ioaddr = ioaddr;
+
+	netif_napi_add(dev, &np->napi, natsemi_poll, 64);
+	np->dev = dev;
+
+	np->pci_dev = pdev;
+	pci_set_drvdata(pdev, dev);
+	np->iosize = iosize;
+	spin_lock_init(&np->lock);
+	np->msg_enable = (debug >= 0) ? (1<<debug)-1 : NATSEMI_DEF_MSG;
+	np->hands_off = 0;
+	np->intr_status = 0;
+	np->eeprom_size = natsemi_pci_info[chip_idx].eeprom_size;
+	if (natsemi_pci_info[chip_idx].flags & NATSEMI_FLAG_IGNORE_PHY)
+		np->ignore_phy = 1;
+	else
+		np->ignore_phy = 0;
+	np->dspcfg_workaround = dspcfg_workaround;
+
+	/* Initial port:
+	 * - If configured to ignore the PHY set up for external.
+	 * - If the nic was configured to use an external phy and if find_mii
+	 *   finds a phy: use external port, first phy that replies.
+	 * - Otherwise: internal port.
+	 * Note that the phy address for the internal phy doesn't matter:
+	 * The address would be used to access a phy over the mii bus, but
+	 * the internal phy is accessed through mapped registers.
+	 */
+	if (np->ignore_phy || readl(ioaddr + ChipConfig) & CfgExtPhy)
+		dev->if_port = PORT_MII;
+	else
+		dev->if_port = PORT_TP;
+	/* Reset the chip to erase previous misconfiguration. */
+	natsemi_reload_eeprom(dev);
+	natsemi_reset(dev);
+
+	if (dev->if_port != PORT_TP) {
+		np->phy_addr_external = find_mii(dev);
+		/* If we're ignoring the PHY it doesn't matter if we can't
+		 * find one. */
+		if (!np->ignore_phy && np->phy_addr_external == PHY_ADDR_NONE) {
+			dev->if_port = PORT_TP;
+			np->phy_addr_external = PHY_ADDR_INTERNAL;
+		}
+	} else {
+		np->phy_addr_external = PHY_ADDR_INTERNAL;
+	}
+
+	option = find_cnt < MAX_UNITS ? options[find_cnt] : 0;
+	/* The lower four bits are the media type. */
+	if (option) {
+		if (option & 0x200)
+			np->full_duplex = 1;
+		if (option & 15)
+			printk(KERN_INFO
+				"natsemi %s: ignoring user supplied media type %d",
+				pci_name(np->pci_dev), option & 15);
+	}
+	if (find_cnt < MAX_UNITS  &&  full_duplex[find_cnt])
+		np->full_duplex = 1;
+
+	dev->netdev_ops = &natsemi_netdev_ops;
+	dev->watchdog_timeo = TX_TIMEOUT;
+
+	dev->ethtool_ops = &ethtool_ops;
+
+	/* MTU range: 64 - 2024 */
+	dev->min_mtu = ETH_ZLEN + ETH_FCS_LEN;
+	dev->max_mtu = NATSEMI_RX_LIMIT - NATSEMI_HEADERS;
+
+	if (mtu)
+		dev->mtu = mtu;
+
+	natsemi_init_media(dev);
+
+	/* save the silicon revision for later querying */
+	np->srr = readl(ioaddr + SiliconRev);
+	if (netif_msg_hw(np))
+		printk(KERN_INFO "natsemi %s: silicon revision %#04x.\n",
+				pci_name(np->pci_dev), np->srr);
+
+	i = register_netdev(dev);
+	if (i)
+		goto err_register_netdev;
+	i = NATSEMI_CREATE_FILE(pdev, dspcfg_workaround);
+	if (i)
+		goto err_create_file;
+
+	if (netif_msg_drv(np)) {
+		printk(KERN_INFO "natsemi %s: %s at %#08llx "
+		       "(%s), %pM, IRQ %d",
+		       dev->name, natsemi_pci_info[chip_idx].name,
+		       (unsigned long long)iostart, pci_name(np->pci_dev),
+		       dev->dev_addr, irq);
+		if (dev->if_port == PORT_TP)
+			printk(", port TP.\n");
+		else if (np->ignore_phy)
+			printk(", port MII, ignoring PHY\n");
+		else
+			printk(", port MII, phy ad %d.\n", np->phy_addr_external);
+	}
+	return 0;
+
+ err_create_file:
+ 	unregister_netdev(dev);
+
+ err_register_netdev:
+	iounmap(ioaddr);
+
+ err_pci_request_regions:
+	free_netdev(dev);
+	return i;
+}
+
+
+/* Read the EEPROM and MII Management Data I/O (MDIO) interfaces.
+   The EEPROM code is for the common 93c06/46 EEPROMs with 6 bit addresses. */
+
+/* Delay between EEPROM clock transitions.
+   No extra delay is needed with 33Mhz PCI, but future 66Mhz access may need
+   a delay.  Note that pre-2.0.34 kernels had a cache-alignment bug that
+   made udelay() unreliable.
+   The old method of using an ISA access as a delay, __SLOW_DOWN_IO__, is
+   deprecated.
+*/
+#define eeprom_delay(ee_addr)	readl(ee_addr)
+
+#define EE_Write0 (EE_ChipSelect)
+#define EE_Write1 (EE_ChipSelect | EE_DataIn)
+
+/* The EEPROM commands include the alway-set leading bit. */
+enum EEPROM_Cmds {
+	EE_WriteCmd=(5 << 6), EE_ReadCmd=(6 << 6), EE_EraseCmd=(7 << 6),
+};
+
+static int eeprom_read(void __iomem *addr, int location)
+{
+	int i;
+	int retval = 0;
+	void __iomem *ee_addr = addr + EECtrl;
+	int read_cmd = location | EE_ReadCmd;
+
+	writel(EE_Write0, ee_addr);
+
+	/* Shift the read command bits out. */
+	for (i = 10; i >= 0; i--) {
+		short dataval = (read_cmd & (1 << i)) ? EE_Write1 : EE_Write0;
+		writel(dataval, ee_addr);
+		eeprom_delay(ee_addr);
+		writel(dataval | EE_ShiftClk, ee_addr);
+		eeprom_delay(ee_addr);
+	}
+	writel(EE_ChipSelect, ee_addr);
+	eeprom_delay(ee_addr);
+
+	for (i = 0; i < 16; i++) {
+		writel(EE_ChipSelect | EE_ShiftClk, ee_addr);
+		eeprom_delay(ee_addr);
+		retval |= (readl(ee_addr) & EE_DataOut) ? 1 << i : 0;
+		writel(EE_ChipSelect, ee_addr);
+		eeprom_delay(ee_addr);
+	}
+
+	/* Terminate the EEPROM access. */
+	writel(EE_Write0, ee_addr);
+	writel(0, ee_addr);
+	return retval;
+}
+
+/* MII transceiver control section.
+ * The 83815 series has an internal transceiver, and we present the
+ * internal management registers as if they were MII connected.
+ * External Phy registers are referenced through the MII interface.
+ */
+
+/* clock transitions >= 20ns (25MHz)
+ * One readl should be good to PCI @ 100MHz
+ */
+#define mii_delay(ioaddr)  readl(ioaddr + EECtrl)
+
+static int mii_getbit (struct net_device *dev)
+{
+	int data;
+	void __iomem *ioaddr = ns_ioaddr(dev);
+
+	writel(MII_ShiftClk, ioaddr + EECtrl);
+	data = readl(ioaddr + EECtrl);
+	writel(0, ioaddr + EECtrl);
+	mii_delay(ioaddr);
+	return (data & MII_Data)? 1 : 0;
+}
+
+static void mii_send_bits (struct net_device *dev, u32 data, int len)
+{
+	u32 i;
+	void __iomem *ioaddr = ns_ioaddr(dev);
+
+	for (i = (1 << (len-1)); i; i >>= 1)
+	{
+		u32 mdio_val = MII_Write | ((data & i)? MII_Data : 0);
+		writel(mdio_val, ioaddr + EECtrl);
+		mii_delay(ioaddr);
+		writel(mdio_val | MII_ShiftClk, ioaddr + EECtrl);
+		mii_delay(ioaddr);
+	}
+	writel(0, ioaddr + EECtrl);
+	mii_delay(ioaddr);
+}
+
+static int miiport_read(struct net_device *dev, int phy_id, int reg)
+{
+	u32 cmd;
+	int i;
+	u32 retval = 0;
+
+	/* Ensure sync */
+	mii_send_bits (dev, 0xffffffff, 32);
+	/* ST(2), OP(2), ADDR(5), REG#(5), TA(2), Data(16) total 32 bits */
+	/* ST,OP = 0110'b for read operation */
+	cmd = (0x06 << 10) | (phy_id << 5) | reg;
+	mii_send_bits (dev, cmd, 14);
+	/* Turnaround */
+	if (mii_getbit (dev))
+		return 0;
+	/* Read data */
+	for (i = 0; i < 16; i++) {
+		retval <<= 1;
+		retval |= mii_getbit (dev);
+	}
+	/* End cycle */
+	mii_getbit (dev);
+	return retval;
+}
+
+static void miiport_write(struct net_device *dev, int phy_id, int reg, u16 data)
+{
+	u32 cmd;
+
+	/* Ensure sync */
+	mii_send_bits (dev, 0xffffffff, 32);
+	/* ST(2), OP(2), ADDR(5), REG#(5), TA(2), Data(16) total 32 bits */
+	/* ST,OP,AAAAA,RRRRR,TA = 0101xxxxxxxxxx10'b = 0x5002 for write */
+	cmd = (0x5002 << 16) | (phy_id << 23) | (reg << 18) | data;
+	mii_send_bits (dev, cmd, 32);
+	/* End cycle */
+	mii_getbit (dev);
+}
+
+static int mdio_read(struct net_device *dev, int reg)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem *ioaddr = ns_ioaddr(dev);
+
+	/* The 83815 series has two ports:
+	 * - an internal transceiver
+	 * - an external mii bus
+	 */
+	if (dev->if_port == PORT_TP)
+		return readw(ioaddr+BasicControl+(reg<<2));
+	else
+		return miiport_read(dev, np->phy_addr_external, reg);
+}
+
+static void mdio_write(struct net_device *dev, int reg, u16 data)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem *ioaddr = ns_ioaddr(dev);
+
+	/* The 83815 series has an internal transceiver; handle separately */
+	if (dev->if_port == PORT_TP)
+		writew(data, ioaddr+BasicControl+(reg<<2));
+	else
+		miiport_write(dev, np->phy_addr_external, reg, data);
+}
+
+static void init_phy_fixup(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem *ioaddr = ns_ioaddr(dev);
+	int i;
+	u32 cfg;
+	u16 tmp;
+
+	/* restore stuff lost when power was out */
+	tmp = mdio_read(dev, MII_BMCR);
+	if (np->autoneg == AUTONEG_ENABLE) {
+		/* renegotiate if something changed */
+		if ((tmp & BMCR_ANENABLE) == 0 ||
+		    np->advertising != mdio_read(dev, MII_ADVERTISE))
+		{
+			/* turn on autonegotiation and force negotiation */
+			tmp |= (BMCR_ANENABLE | BMCR_ANRESTART);
+			mdio_write(dev, MII_ADVERTISE, np->advertising);
+		}
+	} else {
+		/* turn off auto negotiation, set speed and duplexity */
+		tmp &= ~(BMCR_ANENABLE | BMCR_SPEED100 | BMCR_FULLDPLX);
+		if (np->speed == SPEED_100)
+			tmp |= BMCR_SPEED100;
+		if (np->duplex == DUPLEX_FULL)
+			tmp |= BMCR_FULLDPLX;
+		/*
+		 * Note: there is no good way to inform the link partner
+		 * that our capabilities changed. The user has to unplug
+		 * and replug the network cable after some changes, e.g.
+		 * after switching from 10HD, autoneg off to 100 HD,
+		 * autoneg off.
+		 */
+	}
+	mdio_write(dev, MII_BMCR, tmp);
+	readl(ioaddr + ChipConfig);
+	udelay(1);
+
+	/* find out what phy this is */
+	np->mii = (mdio_read(dev, MII_PHYSID1) << 16)
+				+ mdio_read(dev, MII_PHYSID2);
+
+	/* handle external phys here */
+	switch (np->mii) {
+	case PHYID_AM79C874:
+		/* phy specific configuration for fibre/tp operation */
+		tmp = mdio_read(dev, MII_MCTRL);
+		tmp &= ~(MII_FX_SEL | MII_EN_SCRM);
+		if (dev->if_port == PORT_FIBRE)
+			tmp |= MII_FX_SEL;
+		else
+			tmp |= MII_EN_SCRM;
+		mdio_write(dev, MII_MCTRL, tmp);
+		break;
+	default:
+		break;
+	}
+	cfg = readl(ioaddr + ChipConfig);
+	if (cfg & CfgExtPhy)
+		return;
+
+	/* On page 78 of the spec, they recommend some settings for "optimum
+	   performance" to be done in sequence.  These settings optimize some
+	   of the 100Mbit autodetection circuitry.  They say we only want to
+	   do this for rev C of the chip, but engineers at NSC (Bradley
+	   Kennedy) recommends always setting them.  If you don't, you get
+	   errors on some autonegotiations that make the device unusable.
+
+	   It seems that the DSP needs a few usec to reinitialize after
+	   the start of the phy. Just retry writing these values until they
+	   stick.
+	*/
+	for (i=0;i<NATSEMI_HW_TIMEOUT;i++) {
+
+		int dspcfg;
+		writew(1, ioaddr + PGSEL);
+		writew(PMDCSR_VAL, ioaddr + PMDCSR);
+		writew(TSTDAT_VAL, ioaddr + TSTDAT);
+		np->dspcfg = (np->srr <= SRR_DP83815_C)?
+			DSPCFG_VAL : (DSPCFG_COEF | readw(ioaddr + DSPCFG));
+		writew(np->dspcfg, ioaddr + DSPCFG);
+		writew(SDCFG_VAL, ioaddr + SDCFG);
+		writew(0, ioaddr + PGSEL);
+		readl(ioaddr + ChipConfig);
+		udelay(10);
+
+		writew(1, ioaddr + PGSEL);
+		dspcfg = readw(ioaddr + DSPCFG);
+		writew(0, ioaddr + PGSEL);
+		if (np->dspcfg == dspcfg)
+			break;
+	}
+
+	if (netif_msg_link(np)) {
+		if (i==NATSEMI_HW_TIMEOUT) {
+			printk(KERN_INFO
+				"%s: DSPCFG mismatch after retrying for %d usec.\n",
+				dev->name, i*10);
+		} else {
+			printk(KERN_INFO
+				"%s: DSPCFG accepted after %d usec.\n",
+				dev->name, i*10);
+		}
+	}
+	/*
+	 * Enable PHY Specific event based interrupts.  Link state change
+	 * and Auto-Negotiation Completion are among the affected.
+	 * Read the intr status to clear it (needed for wake events).
+	 */
+	readw(ioaddr + MIntrStatus);
+	writew(MICRIntEn, ioaddr + MIntrCtrl);
+}
+
+static int switch_port_external(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem *ioaddr = ns_ioaddr(dev);
+	u32 cfg;
+
+	cfg = readl(ioaddr + ChipConfig);
+	if (cfg & CfgExtPhy)
+		return 0;
+
+	if (netif_msg_link(np)) {
+		printk(KERN_INFO "%s: switching to external transceiver.\n",
+				dev->name);
+	}
+
+	/* 1) switch back to external phy */
+	writel(cfg | (CfgExtPhy | CfgPhyDis), ioaddr + ChipConfig);
+	readl(ioaddr + ChipConfig);
+	udelay(1);
+
+	/* 2) reset the external phy: */
+	/* resetting the external PHY has been known to cause a hub supplying
+	 * power over Ethernet to kill the power.  We don't want to kill
+	 * power to this computer, so we avoid resetting the phy.
+	 */
+
+	/* 3) reinit the phy fixup, it got lost during power down. */
+	move_int_phy(dev, np->phy_addr_external);
+	init_phy_fixup(dev);
+
+	return 1;
+}
+
+static int switch_port_internal(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem *ioaddr = ns_ioaddr(dev);
+	int i;
+	u32 cfg;
+	u16 bmcr;
+
+	cfg = readl(ioaddr + ChipConfig);
+	if (!(cfg &CfgExtPhy))
+		return 0;
+
+	if (netif_msg_link(np)) {
+		printk(KERN_INFO "%s: switching to internal transceiver.\n",
+				dev->name);
+	}
+	/* 1) switch back to internal phy: */
+	cfg = cfg & ~(CfgExtPhy | CfgPhyDis);
+	writel(cfg, ioaddr + ChipConfig);
+	readl(ioaddr + ChipConfig);
+	udelay(1);
+
+	/* 2) reset the internal phy: */
+	bmcr = readw(ioaddr+BasicControl+(MII_BMCR<<2));
+	writel(bmcr | BMCR_RESET, ioaddr+BasicControl+(MII_BMCR<<2));
+	readl(ioaddr + ChipConfig);
+	udelay(10);
+	for (i=0;i<NATSEMI_HW_TIMEOUT;i++) {
+		bmcr = readw(ioaddr+BasicControl+(MII_BMCR<<2));
+		if (!(bmcr & BMCR_RESET))
+			break;
+		udelay(10);
+	}
+	if (i==NATSEMI_HW_TIMEOUT && netif_msg_link(np)) {
+		printk(KERN_INFO
+			"%s: phy reset did not complete in %d usec.\n",
+			dev->name, i*10);
+	}
+	/* 3) reinit the phy fixup, it got lost during power down. */
+	init_phy_fixup(dev);
+
+	return 1;
+}
+
+/* Scan for a PHY on the external mii bus.
+ * There are two tricky points:
+ * - Do not scan while the internal phy is enabled. The internal phy will
+ *   crash: e.g. reads from the DSPCFG register will return odd values and
+ *   the nasty random phy reset code will reset the nic every few seconds.
+ * - The internal phy must be moved around, an external phy could
+ *   have the same address as the internal phy.
+ */
+static int find_mii(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	int tmp;
+	int i;
+	int did_switch;
+
+	/* Switch to external phy */
+	did_switch = switch_port_external(dev);
+
+	/* Scan the possible phy addresses:
+	 *
+	 * PHY address 0 means that the phy is in isolate mode. Not yet
+	 * supported due to lack of test hardware. User space should
+	 * handle it through ethtool.
+	 */
+	for (i = 1; i <= 31; i++) {
+		move_int_phy(dev, i);
+		tmp = miiport_read(dev, i, MII_BMSR);
+		if (tmp != 0xffff && tmp != 0x0000) {
+			/* found something! */
+			np->mii = (mdio_read(dev, MII_PHYSID1) << 16)
+					+ mdio_read(dev, MII_PHYSID2);
+	 		if (netif_msg_probe(np)) {
+				printk(KERN_INFO "natsemi %s: found external phy %08x at address %d.\n",
+						pci_name(np->pci_dev), np->mii, i);
+			}
+			break;
+		}
+	}
+	/* And switch back to internal phy: */
+	if (did_switch)
+		switch_port_internal(dev);
+	return i;
+}
+
+/* CFG bits [13:16] [18:23] */
+#define CFG_RESET_SAVE 0xfde000
+/* WCSR bits [0:4] [9:10] */
+#define WCSR_RESET_SAVE 0x61f
+/* RFCR bits [20] [22] [27:31] */
+#define RFCR_RESET_SAVE 0xf8500000
+
+static void natsemi_reset(struct net_device *dev)
+{
+	int i;
+	u32 cfg;
+	u32 wcsr;
+	u32 rfcr;
+	u16 pmatch[3];
+	u16 sopass[3];
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem *ioaddr = ns_ioaddr(dev);
+
+	/*
+	 * Resetting the chip causes some registers to be lost.
+	 * Natsemi suggests NOT reloading the EEPROM while live, so instead
+	 * we save the state that would have been loaded from EEPROM
+	 * on a normal power-up (see the spec EEPROM map).  This assumes
+	 * whoever calls this will follow up with init_registers() eventually.
+	 */
+
+	/* CFG */
+	cfg = readl(ioaddr + ChipConfig) & CFG_RESET_SAVE;
+	/* WCSR */
+	wcsr = readl(ioaddr + WOLCmd) & WCSR_RESET_SAVE;
+	/* RFCR */
+	rfcr = readl(ioaddr + RxFilterAddr) & RFCR_RESET_SAVE;
+	/* PMATCH */
+	for (i = 0; i < 3; i++) {
+		writel(i*2, ioaddr + RxFilterAddr);
+		pmatch[i] = readw(ioaddr + RxFilterData);
+	}
+	/* SOPAS */
+	for (i = 0; i < 3; i++) {
+		writel(0xa+(i*2), ioaddr + RxFilterAddr);
+		sopass[i] = readw(ioaddr + RxFilterData);
+	}
+
+	/* now whack the chip */
+	writel(ChipReset, ioaddr + ChipCmd);
+	for (i=0;i<NATSEMI_HW_TIMEOUT;i++) {
+		if (!(readl(ioaddr + ChipCmd) & ChipReset))
+			break;
+		udelay(5);
+	}
+	if (i==NATSEMI_HW_TIMEOUT) {
+		printk(KERN_WARNING "%s: reset did not complete in %d usec.\n",
+			dev->name, i*5);
+	} else if (netif_msg_hw(np)) {
+		printk(KERN_DEBUG "%s: reset completed in %d usec.\n",
+			dev->name, i*5);
+	}
+
+	/* restore CFG */
+	cfg |= readl(ioaddr + ChipConfig) & ~CFG_RESET_SAVE;
+	/* turn on external phy if it was selected */
+	if (dev->if_port == PORT_TP)
+		cfg &= ~(CfgExtPhy | CfgPhyDis);
+	else
+		cfg |= (CfgExtPhy | CfgPhyDis);
+	writel(cfg, ioaddr + ChipConfig);
+	/* restore WCSR */
+	wcsr |= readl(ioaddr + WOLCmd) & ~WCSR_RESET_SAVE;
+	writel(wcsr, ioaddr + WOLCmd);
+	/* read RFCR */
+	rfcr |= readl(ioaddr + RxFilterAddr) & ~RFCR_RESET_SAVE;
+	/* restore PMATCH */
+	for (i = 0; i < 3; i++) {
+		writel(i*2, ioaddr + RxFilterAddr);
+		writew(pmatch[i], ioaddr + RxFilterData);
+	}
+	for (i = 0; i < 3; i++) {
+		writel(0xa+(i*2), ioaddr + RxFilterAddr);
+		writew(sopass[i], ioaddr + RxFilterData);
+	}
+	/* restore RFCR */
+	writel(rfcr, ioaddr + RxFilterAddr);
+}
+
+static void reset_rx(struct net_device *dev)
+{
+	int i;
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem *ioaddr = ns_ioaddr(dev);
+
+	np->intr_status &= ~RxResetDone;
+
+	writel(RxReset, ioaddr + ChipCmd);
+
+	for (i=0;i<NATSEMI_HW_TIMEOUT;i++) {
+		np->intr_status |= readl(ioaddr + IntrStatus);
+		if (np->intr_status & RxResetDone)
+			break;
+		udelay(15);
+	}
+	if (i==NATSEMI_HW_TIMEOUT) {
+		printk(KERN_WARNING "%s: RX reset did not complete in %d usec.\n",
+		       dev->name, i*15);
+	} else if (netif_msg_hw(np)) {
+		printk(KERN_WARNING "%s: RX reset took %d usec.\n",
+		       dev->name, i*15);
+	}
+}
+
+static void natsemi_reload_eeprom(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem *ioaddr = ns_ioaddr(dev);
+	int i;
+
+	writel(EepromReload, ioaddr + PCIBusCfg);
+	for (i=0;i<NATSEMI_HW_TIMEOUT;i++) {
+		udelay(50);
+		if (!(readl(ioaddr + PCIBusCfg) & EepromReload))
+			break;
+	}
+	if (i==NATSEMI_HW_TIMEOUT) {
+		printk(KERN_WARNING "natsemi %s: EEPROM did not reload in %d usec.\n",
+			pci_name(np->pci_dev), i*50);
+	} else if (netif_msg_hw(np)) {
+		printk(KERN_DEBUG "natsemi %s: EEPROM reloaded in %d usec.\n",
+			pci_name(np->pci_dev), i*50);
+	}
+}
+
+static void natsemi_stop_rxtx(struct net_device *dev)
+{
+	void __iomem * ioaddr = ns_ioaddr(dev);
+	struct netdev_private *np = netdev_priv(dev);
+	int i;
+
+	writel(RxOff | TxOff, ioaddr + ChipCmd);
+	for(i=0;i< NATSEMI_HW_TIMEOUT;i++) {
+		if ((readl(ioaddr + ChipCmd) & (TxOn|RxOn)) == 0)
+			break;
+		udelay(5);
+	}
+	if (i==NATSEMI_HW_TIMEOUT) {
+		printk(KERN_WARNING "%s: Tx/Rx process did not stop in %d usec.\n",
+			dev->name, i*5);
+	} else if (netif_msg_hw(np)) {
+		printk(KERN_DEBUG "%s: Tx/Rx process stopped in %d usec.\n",
+			dev->name, i*5);
+	}
+}
+
+static int netdev_open(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem * ioaddr = ns_ioaddr(dev);
+	const int irq = np->pci_dev->irq;
+	int i;
+
+	/* Reset the chip, just in case. */
+	natsemi_reset(dev);
+
+	i = request_irq(irq, intr_handler, IRQF_SHARED, dev->name, dev);
+	if (i) return i;
+
+	if (netif_msg_ifup(np))
+		printk(KERN_DEBUG "%s: netdev_open() irq %d.\n",
+			dev->name, irq);
+	i = alloc_ring(dev);
+	if (i < 0) {
+		free_irq(irq, dev);
+		return i;
+	}
+	napi_enable(&np->napi);
+
+	init_ring(dev);
+	spin_lock_irq(&np->lock);
+	init_registers(dev);
+	/* now set the MAC address according to dev->dev_addr */
+	for (i = 0; i < 3; i++) {
+		u16 mac = (dev->dev_addr[2*i+1]<<8) + dev->dev_addr[2*i];
+
+		writel(i*2, ioaddr + RxFilterAddr);
+		writew(mac, ioaddr + RxFilterData);
+	}
+	writel(np->cur_rx_mode, ioaddr + RxFilterAddr);
+	spin_unlock_irq(&np->lock);
+
+	netif_start_queue(dev);
+
+	if (netif_msg_ifup(np))
+		printk(KERN_DEBUG "%s: Done netdev_open(), status: %#08x.\n",
+			dev->name, (int)readl(ioaddr + ChipCmd));
+
+	/* Set the timer to check for link beat. */
+	timer_setup(&np->timer, netdev_timer, 0);
+	np->timer.expires = round_jiffies(jiffies + NATSEMI_TIMER_FREQ);
+	add_timer(&np->timer);
+
+	return 0;
+}
+
+static void do_cable_magic(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem *ioaddr = ns_ioaddr(dev);
+
+	if (dev->if_port != PORT_TP)
+		return;
+
+	if (np->srr >= SRR_DP83816_A5)
+		return;
+
+	/*
+	 * 100 MBit links with short cables can trip an issue with the chip.
+	 * The problem manifests as lots of CRC errors and/or flickering
+	 * activity LED while idle.  This process is based on instructions
+	 * from engineers at National.
+	 */
+	if (readl(ioaddr + ChipConfig) & CfgSpeed100) {
+		u16 data;
+
+		writew(1, ioaddr + PGSEL);
+		/*
+		 * coefficient visibility should already be enabled via
+		 * DSPCFG | 0x1000
+		 */
+		data = readw(ioaddr + TSTDAT) & 0xff;
+		/*
+		 * the value must be negative, and within certain values
+		 * (these values all come from National)
+		 */
+		if (!(data & 0x80) || ((data >= 0xd8) && (data <= 0xff))) {
+			np = netdev_priv(dev);
+
+			/* the bug has been triggered - fix the coefficient */
+			writew(TSTDAT_FIXED, ioaddr + TSTDAT);
+			/* lock the value */
+			data = readw(ioaddr + DSPCFG);
+			np->dspcfg = data | DSPCFG_LOCK;
+			writew(np->dspcfg, ioaddr + DSPCFG);
+		}
+		writew(0, ioaddr + PGSEL);
+	}
+}
+
+static void undo_cable_magic(struct net_device *dev)
+{
+	u16 data;
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem * ioaddr = ns_ioaddr(dev);
+
+	if (dev->if_port != PORT_TP)
+		return;
+
+	if (np->srr >= SRR_DP83816_A5)
+		return;
+
+	writew(1, ioaddr + PGSEL);
+	/* make sure the lock bit is clear */
+	data = readw(ioaddr + DSPCFG);
+	np->dspcfg = data & ~DSPCFG_LOCK;
+	writew(np->dspcfg, ioaddr + DSPCFG);
+	writew(0, ioaddr + PGSEL);
+}
+
+static void check_link(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem * ioaddr = ns_ioaddr(dev);
+	int duplex = np->duplex;
+	u16 bmsr;
+
+	/* If we are ignoring the PHY then don't try reading it. */
+	if (np->ignore_phy)
+		goto propagate_state;
+
+	/* The link status field is latched: it remains low after a temporary
+	 * link failure until it's read. We need the current link status,
+	 * thus read twice.
+	 */
+	mdio_read(dev, MII_BMSR);
+	bmsr = mdio_read(dev, MII_BMSR);
+
+	if (!(bmsr & BMSR_LSTATUS)) {
+		if (netif_carrier_ok(dev)) {
+			if (netif_msg_link(np))
+				printk(KERN_NOTICE "%s: link down.\n",
+				       dev->name);
+			netif_carrier_off(dev);
+			undo_cable_magic(dev);
+		}
+		return;
+	}
+	if (!netif_carrier_ok(dev)) {
+		if (netif_msg_link(np))
+			printk(KERN_NOTICE "%s: link up.\n", dev->name);
+		netif_carrier_on(dev);
+		do_cable_magic(dev);
+	}
+
+	duplex = np->full_duplex;
+	if (!duplex) {
+		if (bmsr & BMSR_ANEGCOMPLETE) {
+			int tmp = mii_nway_result(
+				np->advertising & mdio_read(dev, MII_LPA));
+			if (tmp == LPA_100FULL || tmp == LPA_10FULL)
+				duplex = 1;
+		} else if (mdio_read(dev, MII_BMCR) & BMCR_FULLDPLX)
+			duplex = 1;
+	}
+
+propagate_state:
+	/* if duplex is set then bit 28 must be set, too */
+	if (duplex ^ !!(np->rx_config & RxAcceptTx)) {
+		if (netif_msg_link(np))
+			printk(KERN_INFO
+				"%s: Setting %s-duplex based on negotiated "
+				"link capability.\n", dev->name,
+				duplex ? "full" : "half");
+		if (duplex) {
+			np->rx_config |= RxAcceptTx;
+			np->tx_config |= TxCarrierIgn | TxHeartIgn;
+		} else {
+			np->rx_config &= ~RxAcceptTx;
+			np->tx_config &= ~(TxCarrierIgn | TxHeartIgn);
+		}
+		writel(np->tx_config, ioaddr + TxConfig);
+		writel(np->rx_config, ioaddr + RxConfig);
+	}
+}
+
+static void init_registers(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem * ioaddr = ns_ioaddr(dev);
+
+	init_phy_fixup(dev);
+
+	/* clear any interrupts that are pending, such as wake events */
+	readl(ioaddr + IntrStatus);
+
+	writel(np->ring_dma, ioaddr + RxRingPtr);
+	writel(np->ring_dma + RX_RING_SIZE * sizeof(struct netdev_desc),
+		ioaddr + TxRingPtr);
+
+	/* Initialize other registers.
+	 * Configure the PCI bus bursts and FIFO thresholds.
+	 * Configure for standard, in-spec Ethernet.
+	 * Start with half-duplex. check_link will update
+	 * to the correct settings.
+	 */
+
+	/* DRTH: 2: start tx if 64 bytes are in the fifo
+	 * FLTH: 0x10: refill with next packet if 512 bytes are free
+	 * MXDMA: 0: up to 256 byte bursts.
+	 * 	MXDMA must be <= FLTH
+	 * ECRETRY=1
+	 * ATP=1
+	 */
+	np->tx_config = TxAutoPad | TxCollRetry | TxMxdma_256 |
+				TX_FLTH_VAL | TX_DRTH_VAL_START;
+	writel(np->tx_config, ioaddr + TxConfig);
+
+	/* DRTH 0x10: start copying to memory if 128 bytes are in the fifo
+	 * MXDMA 0: up to 256 byte bursts
+	 */
+	np->rx_config = RxMxdma_256 | RX_DRTH_VAL;
+	/* if receive ring now has bigger buffers than normal, enable jumbo */
+	if (np->rx_buf_sz > NATSEMI_LONGPKT)
+		np->rx_config |= RxAcceptLong;
+
+	writel(np->rx_config, ioaddr + RxConfig);
+
+	/* Disable PME:
+	 * The PME bit is initialized from the EEPROM contents.
+	 * PCI cards probably have PME disabled, but motherboard
+	 * implementations may have PME set to enable WakeOnLan.
+	 * With PME set the chip will scan incoming packets but
+	 * nothing will be written to memory. */
+	np->SavedClkRun = readl(ioaddr + ClkRun);
+	writel(np->SavedClkRun & ~PMEEnable, ioaddr + ClkRun);
+	if (np->SavedClkRun & PMEStatus && netif_msg_wol(np)) {
+		printk(KERN_NOTICE "%s: Wake-up event %#08x\n",
+			dev->name, readl(ioaddr + WOLCmd));
+	}
+
+	check_link(dev);
+	__set_rx_mode(dev);
+
+	/* Enable interrupts by setting the interrupt mask. */
+	writel(DEFAULT_INTR, ioaddr + IntrMask);
+	natsemi_irq_enable(dev);
+
+	writel(RxOn | TxOn, ioaddr + ChipCmd);
+	writel(StatsClear, ioaddr + StatsCtrl); /* Clear Stats */
+}
+
+/*
+ * netdev_timer:
+ * Purpose:
+ * 1) check for link changes. Usually they are handled by the MII interrupt
+ *    but it doesn't hurt to check twice.
+ * 2) check for sudden death of the NIC:
+ *    It seems that a reference set for this chip went out with incorrect info,
+ *    and there exist boards that aren't quite right.  An unexpected voltage
+ *    drop can cause the PHY to get itself in a weird state (basically reset).
+ *    NOTE: this only seems to affect revC chips.  The user can disable
+ *    this check via dspcfg_workaround sysfs option.
+ * 3) check of death of the RX path due to OOM
+ */
+static void netdev_timer(struct timer_list *t)
+{
+	struct netdev_private *np = from_timer(np, t, timer);
+	struct net_device *dev = np->dev;
+	void __iomem * ioaddr = ns_ioaddr(dev);
+	int next_tick = NATSEMI_TIMER_FREQ;
+	const int irq = np->pci_dev->irq;
+
+	if (netif_msg_timer(np)) {
+		/* DO NOT read the IntrStatus register,
+		 * a read clears any pending interrupts.
+		 */
+		printk(KERN_DEBUG "%s: Media selection timer tick.\n",
+			dev->name);
+	}
+
+	if (dev->if_port == PORT_TP) {
+		u16 dspcfg;
+
+		spin_lock_irq(&np->lock);
+		/* check for a nasty random phy-reset - use dspcfg as a flag */
+		writew(1, ioaddr+PGSEL);
+		dspcfg = readw(ioaddr+DSPCFG);
+		writew(0, ioaddr+PGSEL);
+		if (np->dspcfg_workaround && dspcfg != np->dspcfg) {
+			if (!netif_queue_stopped(dev)) {
+				spin_unlock_irq(&np->lock);
+				if (netif_msg_drv(np))
+					printk(KERN_NOTICE "%s: possible phy reset: "
+						"re-initializing\n", dev->name);
+				disable_irq(irq);
+				spin_lock_irq(&np->lock);
+				natsemi_stop_rxtx(dev);
+				dump_ring(dev);
+				reinit_ring(dev);
+				init_registers(dev);
+				spin_unlock_irq(&np->lock);
+				enable_irq(irq);
+			} else {
+				/* hurry back */
+				next_tick = HZ;
+				spin_unlock_irq(&np->lock);
+			}
+		} else {
+			/* init_registers() calls check_link() for the above case */
+			check_link(dev);
+			spin_unlock_irq(&np->lock);
+		}
+	} else {
+		spin_lock_irq(&np->lock);
+		check_link(dev);
+		spin_unlock_irq(&np->lock);
+	}
+	if (np->oom) {
+		disable_irq(irq);
+		np->oom = 0;
+		refill_rx(dev);
+		enable_irq(irq);
+		if (!np->oom) {
+			writel(RxOn, ioaddr + ChipCmd);
+		} else {
+			next_tick = 1;
+		}
+	}
+
+	if (next_tick > 1)
+		mod_timer(&np->timer, round_jiffies(jiffies + next_tick));
+	else
+		mod_timer(&np->timer, jiffies + next_tick);
+}
+
+static void dump_ring(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+
+	if (netif_msg_pktdata(np)) {
+		int i;
+		printk(KERN_DEBUG "  Tx ring at %p:\n", np->tx_ring);
+		for (i = 0; i < TX_RING_SIZE; i++) {
+			printk(KERN_DEBUG " #%d desc. %#08x %#08x %#08x.\n",
+				i, np->tx_ring[i].next_desc,
+				np->tx_ring[i].cmd_status,
+				np->tx_ring[i].addr);
+		}
+		printk(KERN_DEBUG "  Rx ring %p:\n", np->rx_ring);
+		for (i = 0; i < RX_RING_SIZE; i++) {
+			printk(KERN_DEBUG " #%d desc. %#08x %#08x %#08x.\n",
+				i, np->rx_ring[i].next_desc,
+				np->rx_ring[i].cmd_status,
+				np->rx_ring[i].addr);
+		}
+	}
+}
+
+static void ns_tx_timeout(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem * ioaddr = ns_ioaddr(dev);
+	const int irq = np->pci_dev->irq;
+
+	disable_irq(irq);
+	spin_lock_irq(&np->lock);
+	if (!np->hands_off) {
+		if (netif_msg_tx_err(np))
+			printk(KERN_WARNING
+				"%s: Transmit timed out, status %#08x,"
+				" resetting...\n",
+				dev->name, readl(ioaddr + IntrStatus));
+		dump_ring(dev);
+
+		natsemi_reset(dev);
+		reinit_ring(dev);
+		init_registers(dev);
+	} else {
+		printk(KERN_WARNING
+			"%s: tx_timeout while in hands_off state?\n",
+			dev->name);
+	}
+	spin_unlock_irq(&np->lock);
+	enable_irq(irq);
+
+	netif_trans_update(dev); /* prevent tx timeout */
+	dev->stats.tx_errors++;
+	netif_wake_queue(dev);
+}
+
+static int alloc_ring(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	np->rx_ring = pci_alloc_consistent(np->pci_dev,
+		sizeof(struct netdev_desc) * (RX_RING_SIZE+TX_RING_SIZE),
+		&np->ring_dma);
+	if (!np->rx_ring)
+		return -ENOMEM;
+	np->tx_ring = &np->rx_ring[RX_RING_SIZE];
+	return 0;
+}
+
+static void refill_rx(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+
+	/* Refill the Rx ring buffers. */
+	for (; np->cur_rx - np->dirty_rx > 0; np->dirty_rx++) {
+		struct sk_buff *skb;
+		int entry = np->dirty_rx % RX_RING_SIZE;
+		if (np->rx_skbuff[entry] == NULL) {
+			unsigned int buflen = np->rx_buf_sz+NATSEMI_PADDING;
+			skb = netdev_alloc_skb(dev, buflen);
+			np->rx_skbuff[entry] = skb;
+			if (skb == NULL)
+				break; /* Better luck next round. */
+			np->rx_dma[entry] = pci_map_single(np->pci_dev,
+				skb->data, buflen, PCI_DMA_FROMDEVICE);
+			if (pci_dma_mapping_error(np->pci_dev,
+						  np->rx_dma[entry])) {
+				dev_kfree_skb_any(skb);
+				np->rx_skbuff[entry] = NULL;
+				break; /* Better luck next round. */
+			}
+			np->rx_ring[entry].addr = cpu_to_le32(np->rx_dma[entry]);
+		}
+		np->rx_ring[entry].cmd_status = cpu_to_le32(np->rx_buf_sz);
+	}
+	if (np->cur_rx - np->dirty_rx == RX_RING_SIZE) {
+		if (netif_msg_rx_err(np))
+			printk(KERN_WARNING "%s: going OOM.\n", dev->name);
+		np->oom = 1;
+	}
+}
+
+static void set_bufsize(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	if (dev->mtu <= ETH_DATA_LEN)
+		np->rx_buf_sz = ETH_DATA_LEN + NATSEMI_HEADERS;
+	else
+		np->rx_buf_sz = dev->mtu + NATSEMI_HEADERS;
+}
+
+/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
+static void init_ring(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	int i;
+
+	/* 1) TX ring */
+	np->dirty_tx = np->cur_tx = 0;
+	for (i = 0; i < TX_RING_SIZE; i++) {
+		np->tx_skbuff[i] = NULL;
+		np->tx_ring[i].next_desc = cpu_to_le32(np->ring_dma
+			+sizeof(struct netdev_desc)
+			*((i+1)%TX_RING_SIZE+RX_RING_SIZE));
+		np->tx_ring[i].cmd_status = 0;
+	}
+
+	/* 2) RX ring */
+	np->dirty_rx = 0;
+	np->cur_rx = RX_RING_SIZE;
+	np->oom = 0;
+	set_bufsize(dev);
+
+	np->rx_head_desc = &np->rx_ring[0];
+
+	/* Please be careful before changing this loop - at least gcc-2.95.1
+	 * miscompiles it otherwise.
+	 */
+	/* Initialize all Rx descriptors. */
+	for (i = 0; i < RX_RING_SIZE; i++) {
+		np->rx_ring[i].next_desc = cpu_to_le32(np->ring_dma
+				+sizeof(struct netdev_desc)
+				*((i+1)%RX_RING_SIZE));
+		np->rx_ring[i].cmd_status = cpu_to_le32(DescOwn);
+		np->rx_skbuff[i] = NULL;
+	}
+	refill_rx(dev);
+	dump_ring(dev);
+}
+
+static void drain_tx(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	int i;
+
+	for (i = 0; i < TX_RING_SIZE; i++) {
+		if (np->tx_skbuff[i]) {
+			pci_unmap_single(np->pci_dev,
+				np->tx_dma[i], np->tx_skbuff[i]->len,
+				PCI_DMA_TODEVICE);
+			dev_kfree_skb(np->tx_skbuff[i]);
+			dev->stats.tx_dropped++;
+		}
+		np->tx_skbuff[i] = NULL;
+	}
+}
+
+static void drain_rx(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	unsigned int buflen = np->rx_buf_sz;
+	int i;
+
+	/* Free all the skbuffs in the Rx queue. */
+	for (i = 0; i < RX_RING_SIZE; i++) {
+		np->rx_ring[i].cmd_status = 0;
+		np->rx_ring[i].addr = cpu_to_le32(0xBADF00D0); /* An invalid address. */
+		if (np->rx_skbuff[i]) {
+			pci_unmap_single(np->pci_dev, np->rx_dma[i],
+				buflen + NATSEMI_PADDING,
+				PCI_DMA_FROMDEVICE);
+			dev_kfree_skb(np->rx_skbuff[i]);
+		}
+		np->rx_skbuff[i] = NULL;
+	}
+}
+
+static void drain_ring(struct net_device *dev)
+{
+	drain_rx(dev);
+	drain_tx(dev);
+}
+
+static void free_ring(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	pci_free_consistent(np->pci_dev,
+		sizeof(struct netdev_desc) * (RX_RING_SIZE+TX_RING_SIZE),
+		np->rx_ring, np->ring_dma);
+}
+
+static void reinit_rx(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	int i;
+
+	/* RX Ring */
+	np->dirty_rx = 0;
+	np->cur_rx = RX_RING_SIZE;
+	np->rx_head_desc = &np->rx_ring[0];
+	/* Initialize all Rx descriptors. */
+	for (i = 0; i < RX_RING_SIZE; i++)
+		np->rx_ring[i].cmd_status = cpu_to_le32(DescOwn);
+
+	refill_rx(dev);
+}
+
+static void reinit_ring(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	int i;
+
+	/* drain TX ring */
+	drain_tx(dev);
+	np->dirty_tx = np->cur_tx = 0;
+	for (i=0;i<TX_RING_SIZE;i++)
+		np->tx_ring[i].cmd_status = 0;
+
+	reinit_rx(dev);
+}
+
+static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem * ioaddr = ns_ioaddr(dev);
+	unsigned entry;
+	unsigned long flags;
+
+	/* Note: Ordering is important here, set the field with the
+	   "ownership" bit last, and only then increment cur_tx. */
+
+	/* Calculate the next Tx descriptor entry. */
+	entry = np->cur_tx % TX_RING_SIZE;
+
+	np->tx_skbuff[entry] = skb;
+	np->tx_dma[entry] = pci_map_single(np->pci_dev,
+				skb->data,skb->len, PCI_DMA_TODEVICE);
+	if (pci_dma_mapping_error(np->pci_dev, np->tx_dma[entry])) {
+		np->tx_skbuff[entry] = NULL;
+		dev_kfree_skb_irq(skb);
+		dev->stats.tx_dropped++;
+		return NETDEV_TX_OK;
+	}
+
+	np->tx_ring[entry].addr = cpu_to_le32(np->tx_dma[entry]);
+
+	spin_lock_irqsave(&np->lock, flags);
+
+	if (!np->hands_off) {
+		np->tx_ring[entry].cmd_status = cpu_to_le32(DescOwn | skb->len);
+		/* StrongARM: Explicitly cache flush np->tx_ring and
+		 * skb->data,skb->len. */
+		wmb();
+		np->cur_tx++;
+		if (np->cur_tx - np->dirty_tx >= TX_QUEUE_LEN - 1) {
+			netdev_tx_done(dev);
+			if (np->cur_tx - np->dirty_tx >= TX_QUEUE_LEN - 1)
+				netif_stop_queue(dev);
+		}
+		/* Wake the potentially-idle transmit channel. */
+		writel(TxOn, ioaddr + ChipCmd);
+	} else {
+		dev_kfree_skb_irq(skb);
+		dev->stats.tx_dropped++;
+	}
+	spin_unlock_irqrestore(&np->lock, flags);
+
+	if (netif_msg_tx_queued(np)) {
+		printk(KERN_DEBUG "%s: Transmit frame #%d queued in slot %d.\n",
+			dev->name, np->cur_tx, entry);
+	}
+	return NETDEV_TX_OK;
+}
+
+static void netdev_tx_done(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+
+	for (; np->cur_tx - np->dirty_tx > 0; np->dirty_tx++) {
+		int entry = np->dirty_tx % TX_RING_SIZE;
+		if (np->tx_ring[entry].cmd_status & cpu_to_le32(DescOwn))
+			break;
+		if (netif_msg_tx_done(np))
+			printk(KERN_DEBUG
+				"%s: tx frame #%d finished, status %#08x.\n",
+					dev->name, np->dirty_tx,
+					le32_to_cpu(np->tx_ring[entry].cmd_status));
+		if (np->tx_ring[entry].cmd_status & cpu_to_le32(DescPktOK)) {
+			dev->stats.tx_packets++;
+			dev->stats.tx_bytes += np->tx_skbuff[entry]->len;
+		} else { /* Various Tx errors */
+			int tx_status =
+				le32_to_cpu(np->tx_ring[entry].cmd_status);
+			if (tx_status & (DescTxAbort|DescTxExcColl))
+				dev->stats.tx_aborted_errors++;
+			if (tx_status & DescTxFIFO)
+				dev->stats.tx_fifo_errors++;
+			if (tx_status & DescTxCarrier)
+				dev->stats.tx_carrier_errors++;
+			if (tx_status & DescTxOOWCol)
+				dev->stats.tx_window_errors++;
+			dev->stats.tx_errors++;
+		}
+		pci_unmap_single(np->pci_dev,np->tx_dma[entry],
+					np->tx_skbuff[entry]->len,
+					PCI_DMA_TODEVICE);
+		/* Free the original skb. */
+		dev_kfree_skb_irq(np->tx_skbuff[entry]);
+		np->tx_skbuff[entry] = NULL;
+	}
+	if (netif_queue_stopped(dev) &&
+	    np->cur_tx - np->dirty_tx < TX_QUEUE_LEN - 4) {
+		/* The ring is no longer full, wake queue. */
+		netif_wake_queue(dev);
+	}
+}
+
+/* The interrupt handler doesn't actually handle interrupts itself, it
+ * schedules a NAPI poll if there is anything to do. */
+static irqreturn_t intr_handler(int irq, void *dev_instance)
+{
+	struct net_device *dev = dev_instance;
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem * ioaddr = ns_ioaddr(dev);
+
+	/* Reading IntrStatus automatically acknowledges so don't do
+	 * that while interrupts are disabled, (for example, while a
+	 * poll is scheduled).  */
+	if (np->hands_off || !readl(ioaddr + IntrEnable))
+		return IRQ_NONE;
+
+	np->intr_status = readl(ioaddr + IntrStatus);
+
+	if (!np->intr_status)
+		return IRQ_NONE;
+
+	if (netif_msg_intr(np))
+		printk(KERN_DEBUG
+		       "%s: Interrupt, status %#08x, mask %#08x.\n",
+		       dev->name, np->intr_status,
+		       readl(ioaddr + IntrMask));
+
+	prefetch(&np->rx_skbuff[np->cur_rx % RX_RING_SIZE]);
+
+	if (napi_schedule_prep(&np->napi)) {
+		/* Disable interrupts and register for poll */
+		natsemi_irq_disable(dev);
+		__napi_schedule(&np->napi);
+	} else
+		printk(KERN_WARNING
+	       	       "%s: Ignoring interrupt, status %#08x, mask %#08x.\n",
+		       dev->name, np->intr_status,
+		       readl(ioaddr + IntrMask));
+
+	return IRQ_HANDLED;
+}
+
+/* This is the NAPI poll routine.  As well as the standard RX handling
+ * it also handles all other interrupts that the chip might raise.
+ */
+static int natsemi_poll(struct napi_struct *napi, int budget)
+{
+	struct netdev_private *np = container_of(napi, struct netdev_private, napi);
+	struct net_device *dev = np->dev;
+	void __iomem * ioaddr = ns_ioaddr(dev);
+	int work_done = 0;
+
+	do {
+		if (netif_msg_intr(np))
+			printk(KERN_DEBUG
+			       "%s: Poll, status %#08x, mask %#08x.\n",
+			       dev->name, np->intr_status,
+			       readl(ioaddr + IntrMask));
+
+		/* netdev_rx() may read IntrStatus again if the RX state
+		 * machine falls over so do it first. */
+		if (np->intr_status &
+		    (IntrRxDone | IntrRxIntr | RxStatusFIFOOver |
+		     IntrRxErr | IntrRxOverrun)) {
+			netdev_rx(dev, &work_done, budget);
+		}
+
+		if (np->intr_status &
+		    (IntrTxDone | IntrTxIntr | IntrTxIdle | IntrTxErr)) {
+			spin_lock(&np->lock);
+			netdev_tx_done(dev);
+			spin_unlock(&np->lock);
+		}
+
+		/* Abnormal error summary/uncommon events handlers. */
+		if (np->intr_status & IntrAbnormalSummary)
+			netdev_error(dev, np->intr_status);
+
+		if (work_done >= budget)
+			return work_done;
+
+		np->intr_status = readl(ioaddr + IntrStatus);
+	} while (np->intr_status);
+
+	napi_complete_done(napi, work_done);
+
+	/* Reenable interrupts providing nothing is trying to shut
+	 * the chip down. */
+	spin_lock(&np->lock);
+	if (!np->hands_off)
+		natsemi_irq_enable(dev);
+	spin_unlock(&np->lock);
+
+	return work_done;
+}
+
+/* This routine is logically part of the interrupt handler, but separated
+   for clarity and better register allocation. */
+static void netdev_rx(struct net_device *dev, int *work_done, int work_to_do)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	int entry = np->cur_rx % RX_RING_SIZE;
+	int boguscnt = np->dirty_rx + RX_RING_SIZE - np->cur_rx;
+	s32 desc_status = le32_to_cpu(np->rx_head_desc->cmd_status);
+	unsigned int buflen = np->rx_buf_sz;
+	void __iomem * ioaddr = ns_ioaddr(dev);
+
+	/* If the driver owns the next entry it's a new packet. Send it up. */
+	while (desc_status < 0) { /* e.g. & DescOwn */
+		int pkt_len;
+		if (netif_msg_rx_status(np))
+			printk(KERN_DEBUG
+				"  netdev_rx() entry %d status was %#08x.\n",
+				entry, desc_status);
+		if (--boguscnt < 0)
+			break;
+
+		if (*work_done >= work_to_do)
+			break;
+
+		(*work_done)++;
+
+		pkt_len = (desc_status & DescSizeMask) - 4;
+		if ((desc_status&(DescMore|DescPktOK|DescRxLong)) != DescPktOK){
+			if (desc_status & DescMore) {
+				unsigned long flags;
+
+				if (netif_msg_rx_err(np))
+					printk(KERN_WARNING
+						"%s: Oversized(?) Ethernet "
+						"frame spanned multiple "
+						"buffers, entry %#08x "
+						"status %#08x.\n", dev->name,
+						np->cur_rx, desc_status);
+				dev->stats.rx_length_errors++;
+
+				/* The RX state machine has probably
+				 * locked up beneath us.  Follow the
+				 * reset procedure documented in
+				 * AN-1287. */
+
+				spin_lock_irqsave(&np->lock, flags);
+				reset_rx(dev);
+				reinit_rx(dev);
+				writel(np->ring_dma, ioaddr + RxRingPtr);
+				check_link(dev);
+				spin_unlock_irqrestore(&np->lock, flags);
+
+				/* We'll enable RX on exit from this
+				 * function. */
+				break;
+
+			} else {
+				/* There was an error. */
+				dev->stats.rx_errors++;
+				if (desc_status & (DescRxAbort|DescRxOver))
+					dev->stats.rx_over_errors++;
+				if (desc_status & (DescRxLong|DescRxRunt))
+					dev->stats.rx_length_errors++;
+				if (desc_status & (DescRxInvalid|DescRxAlign))
+					dev->stats.rx_frame_errors++;
+				if (desc_status & DescRxCRC)
+					dev->stats.rx_crc_errors++;
+			}
+		} else if (pkt_len > np->rx_buf_sz) {
+			/* if this is the tail of a double buffer
+			 * packet, we've already counted the error
+			 * on the first part.  Ignore the second half.
+			 */
+		} else {
+			struct sk_buff *skb;
+			/* Omit CRC size. */
+			/* Check if the packet is long enough to accept
+			 * without copying to a minimally-sized skbuff. */
+			if (pkt_len < rx_copybreak &&
+			    (skb = netdev_alloc_skb(dev, pkt_len + RX_OFFSET)) != NULL) {
+				/* 16 byte align the IP header */
+				skb_reserve(skb, RX_OFFSET);
+				pci_dma_sync_single_for_cpu(np->pci_dev,
+					np->rx_dma[entry],
+					buflen,
+					PCI_DMA_FROMDEVICE);
+				skb_copy_to_linear_data(skb,
+					np->rx_skbuff[entry]->data, pkt_len);
+				skb_put(skb, pkt_len);
+				pci_dma_sync_single_for_device(np->pci_dev,
+					np->rx_dma[entry],
+					buflen,
+					PCI_DMA_FROMDEVICE);
+			} else {
+				pci_unmap_single(np->pci_dev, np->rx_dma[entry],
+						 buflen + NATSEMI_PADDING,
+						 PCI_DMA_FROMDEVICE);
+				skb_put(skb = np->rx_skbuff[entry], pkt_len);
+				np->rx_skbuff[entry] = NULL;
+			}
+			skb->protocol = eth_type_trans(skb, dev);
+			netif_receive_skb(skb);
+			dev->stats.rx_packets++;
+			dev->stats.rx_bytes += pkt_len;
+		}
+		entry = (++np->cur_rx) % RX_RING_SIZE;
+		np->rx_head_desc = &np->rx_ring[entry];
+		desc_status = le32_to_cpu(np->rx_head_desc->cmd_status);
+	}
+	refill_rx(dev);
+
+	/* Restart Rx engine if stopped. */
+	if (np->oom)
+		mod_timer(&np->timer, jiffies + 1);
+	else
+		writel(RxOn, ioaddr + ChipCmd);
+}
+
+static void netdev_error(struct net_device *dev, int intr_status)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem * ioaddr = ns_ioaddr(dev);
+
+	spin_lock(&np->lock);
+	if (intr_status & LinkChange) {
+		u16 lpa = mdio_read(dev, MII_LPA);
+		if (mdio_read(dev, MII_BMCR) & BMCR_ANENABLE &&
+		    netif_msg_link(np)) {
+			printk(KERN_INFO
+				"%s: Autonegotiation advertising"
+				" %#04x  partner %#04x.\n", dev->name,
+				np->advertising, lpa);
+		}
+
+		/* read MII int status to clear the flag */
+		readw(ioaddr + MIntrStatus);
+		check_link(dev);
+	}
+	if (intr_status & StatsMax) {
+		__get_stats(dev);
+	}
+	if (intr_status & IntrTxUnderrun) {
+		if ((np->tx_config & TxDrthMask) < TX_DRTH_VAL_LIMIT) {
+			np->tx_config += TX_DRTH_VAL_INC;
+			if (netif_msg_tx_err(np))
+				printk(KERN_NOTICE
+					"%s: increased tx threshold, txcfg %#08x.\n",
+					dev->name, np->tx_config);
+		} else {
+			if (netif_msg_tx_err(np))
+				printk(KERN_NOTICE
+					"%s: tx underrun with maximum tx threshold, txcfg %#08x.\n",
+					dev->name, np->tx_config);
+		}
+		writel(np->tx_config, ioaddr + TxConfig);
+	}
+	if (intr_status & WOLPkt && netif_msg_wol(np)) {
+		int wol_status = readl(ioaddr + WOLCmd);
+		printk(KERN_NOTICE "%s: Link wake-up event %#08x\n",
+			dev->name, wol_status);
+	}
+	if (intr_status & RxStatusFIFOOver) {
+		if (netif_msg_rx_err(np) && netif_msg_intr(np)) {
+			printk(KERN_NOTICE "%s: Rx status FIFO overrun\n",
+				dev->name);
+		}
+		dev->stats.rx_fifo_errors++;
+		dev->stats.rx_errors++;
+	}
+	/* Hmmmmm, it's not clear how to recover from PCI faults. */
+	if (intr_status & IntrPCIErr) {
+		printk(KERN_NOTICE "%s: PCI error %#08x\n", dev->name,
+			intr_status & IntrPCIErr);
+		dev->stats.tx_fifo_errors++;
+		dev->stats.tx_errors++;
+		dev->stats.rx_fifo_errors++;
+		dev->stats.rx_errors++;
+	}
+	spin_unlock(&np->lock);
+}
+
+static void __get_stats(struct net_device *dev)
+{
+	void __iomem * ioaddr = ns_ioaddr(dev);
+
+	/* The chip only need report frame silently dropped. */
+	dev->stats.rx_crc_errors += readl(ioaddr + RxCRCErrs);
+	dev->stats.rx_missed_errors += readl(ioaddr + RxMissed);
+}
+
+static struct net_device_stats *get_stats(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+
+	/* The chip only need report frame silently dropped. */
+	spin_lock_irq(&np->lock);
+	if (netif_running(dev) && !np->hands_off)
+		__get_stats(dev);
+	spin_unlock_irq(&np->lock);
+
+	return &dev->stats;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void natsemi_poll_controller(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	const int irq = np->pci_dev->irq;
+
+	disable_irq(irq);
+	intr_handler(irq, dev);
+	enable_irq(irq);
+}
+#endif
+
+#define HASH_TABLE	0x200
+static void __set_rx_mode(struct net_device *dev)
+{
+	void __iomem * ioaddr = ns_ioaddr(dev);
+	struct netdev_private *np = netdev_priv(dev);
+	u8 mc_filter[64]; /* Multicast hash filter */
+	u32 rx_mode;
+
+	if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
+		rx_mode = RxFilterEnable | AcceptBroadcast
+			| AcceptAllMulticast | AcceptAllPhys | AcceptMyPhys;
+	} else if ((netdev_mc_count(dev) > multicast_filter_limit) ||
+		   (dev->flags & IFF_ALLMULTI)) {
+		rx_mode = RxFilterEnable | AcceptBroadcast
+			| AcceptAllMulticast | AcceptMyPhys;
+	} else {
+		struct netdev_hw_addr *ha;
+		int i;
+
+		memset(mc_filter, 0, sizeof(mc_filter));
+		netdev_for_each_mc_addr(ha, dev) {
+			int b = (ether_crc(ETH_ALEN, ha->addr) >> 23) & 0x1ff;
+			mc_filter[b/8] |= (1 << (b & 0x07));
+		}
+		rx_mode = RxFilterEnable | AcceptBroadcast
+			| AcceptMulticast | AcceptMyPhys;
+		for (i = 0; i < 64; i += 2) {
+			writel(HASH_TABLE + i, ioaddr + RxFilterAddr);
+			writel((mc_filter[i + 1] << 8) + mc_filter[i],
+			       ioaddr + RxFilterData);
+		}
+	}
+	writel(rx_mode, ioaddr + RxFilterAddr);
+	np->cur_rx_mode = rx_mode;
+}
+
+static int natsemi_change_mtu(struct net_device *dev, int new_mtu)
+{
+	dev->mtu = new_mtu;
+
+	/* synchronized against open : rtnl_lock() held by caller */
+	if (netif_running(dev)) {
+		struct netdev_private *np = netdev_priv(dev);
+		void __iomem * ioaddr = ns_ioaddr(dev);
+		const int irq = np->pci_dev->irq;
+
+		disable_irq(irq);
+		spin_lock(&np->lock);
+		/* stop engines */
+		natsemi_stop_rxtx(dev);
+		/* drain rx queue */
+		drain_rx(dev);
+		/* change buffers */
+		set_bufsize(dev);
+		reinit_rx(dev);
+		writel(np->ring_dma, ioaddr + RxRingPtr);
+		/* restart engines */
+		writel(RxOn | TxOn, ioaddr + ChipCmd);
+		spin_unlock(&np->lock);
+		enable_irq(irq);
+	}
+	return 0;
+}
+
+static void set_rx_mode(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	spin_lock_irq(&np->lock);
+	if (!np->hands_off)
+		__set_rx_mode(dev);
+	spin_unlock_irq(&np->lock);
+}
+
+static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
+	strlcpy(info->version, DRV_VERSION, sizeof(info->version));
+	strlcpy(info->bus_info, pci_name(np->pci_dev), sizeof(info->bus_info));
+}
+
+static int get_regs_len(struct net_device *dev)
+{
+	return NATSEMI_REGS_SIZE;
+}
+
+static int get_eeprom_len(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	return np->eeprom_size;
+}
+
+static int get_link_ksettings(struct net_device *dev,
+			      struct ethtool_link_ksettings *ecmd)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	spin_lock_irq(&np->lock);
+	netdev_get_ecmd(dev, ecmd);
+	spin_unlock_irq(&np->lock);
+	return 0;
+}
+
+static int set_link_ksettings(struct net_device *dev,
+			      const struct ethtool_link_ksettings *ecmd)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	int res;
+	spin_lock_irq(&np->lock);
+	res = netdev_set_ecmd(dev, ecmd);
+	spin_unlock_irq(&np->lock);
+	return res;
+}
+
+static void get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	spin_lock_irq(&np->lock);
+	netdev_get_wol(dev, &wol->supported, &wol->wolopts);
+	netdev_get_sopass(dev, wol->sopass);
+	spin_unlock_irq(&np->lock);
+}
+
+static int set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	int res;
+	spin_lock_irq(&np->lock);
+	netdev_set_wol(dev, wol->wolopts);
+	res = netdev_set_sopass(dev, wol->sopass);
+	spin_unlock_irq(&np->lock);
+	return res;
+}
+
+static void get_regs(struct net_device *dev, struct ethtool_regs *regs, void *buf)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	regs->version = NATSEMI_REGS_VER;
+	spin_lock_irq(&np->lock);
+	netdev_get_regs(dev, buf);
+	spin_unlock_irq(&np->lock);
+}
+
+static u32 get_msglevel(struct net_device *dev)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	return np->msg_enable;
+}
+
+static void set_msglevel(struct net_device *dev, u32 val)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	np->msg_enable = val;
+}
+
+static int nway_reset(struct net_device *dev)
+{
+	int tmp;
+	int r = -EINVAL;
+	/* if autoneg is off, it's an error */
+	tmp = mdio_read(dev, MII_BMCR);
+	if (tmp & BMCR_ANENABLE) {
+		tmp |= (BMCR_ANRESTART);
+		mdio_write(dev, MII_BMCR, tmp);
+		r = 0;
+	}
+	return r;
+}
+
+static u32 get_link(struct net_device *dev)
+{
+	/* LSTATUS is latched low until a read - so read twice */
+	mdio_read(dev, MII_BMSR);
+	return (mdio_read(dev, MII_BMSR)&BMSR_LSTATUS) ? 1:0;
+}
+
+static int get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, u8 *data)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	u8 *eebuf;
+	int res;
+
+	eebuf = kmalloc(np->eeprom_size, GFP_KERNEL);
+	if (!eebuf)
+		return -ENOMEM;
+
+	eeprom->magic = PCI_VENDOR_ID_NS | (PCI_DEVICE_ID_NS_83815<<16);
+	spin_lock_irq(&np->lock);
+	res = netdev_get_eeprom(dev, eebuf);
+	spin_unlock_irq(&np->lock);
+	if (!res)
+		memcpy(data, eebuf+eeprom->offset, eeprom->len);
+	kfree(eebuf);
+	return res;
+}
+
+static const struct ethtool_ops ethtool_ops = {
+	.get_drvinfo = get_drvinfo,
+	.get_regs_len = get_regs_len,
+	.get_eeprom_len = get_eeprom_len,
+	.get_wol = get_wol,
+	.set_wol = set_wol,
+	.get_regs = get_regs,
+	.get_msglevel = get_msglevel,
+	.set_msglevel = set_msglevel,
+	.nway_reset = nway_reset,
+	.get_link = get_link,
+	.get_eeprom = get_eeprom,
+	.get_link_ksettings = get_link_ksettings,
+	.set_link_ksettings = set_link_ksettings,
+};
+
+static int netdev_set_wol(struct net_device *dev, u32 newval)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem * ioaddr = ns_ioaddr(dev);
+	u32 data = readl(ioaddr + WOLCmd) & ~WakeOptsSummary;
+
+	/* translate to bitmasks this chip understands */
+	if (newval & WAKE_PHY)
+		data |= WakePhy;
+	if (newval & WAKE_UCAST)
+		data |= WakeUnicast;
+	if (newval & WAKE_MCAST)
+		data |= WakeMulticast;
+	if (newval & WAKE_BCAST)
+		data |= WakeBroadcast;
+	if (newval & WAKE_ARP)
+		data |= WakeArp;
+	if (newval & WAKE_MAGIC)
+		data |= WakeMagic;
+	if (np->srr >= SRR_DP83815_D) {
+		if (newval & WAKE_MAGICSECURE) {
+			data |= WakeMagicSecure;
+		}
+	}
+
+	writel(data, ioaddr + WOLCmd);
+
+	return 0;
+}
+
+static int netdev_get_wol(struct net_device *dev, u32 *supported, u32 *cur)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem * ioaddr = ns_ioaddr(dev);
+	u32 regval = readl(ioaddr + WOLCmd);
+
+	*supported = (WAKE_PHY | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST
+			| WAKE_ARP | WAKE_MAGIC);
+
+	if (np->srr >= SRR_DP83815_D) {
+		/* SOPASS works on revD and higher */
+		*supported |= WAKE_MAGICSECURE;
+	}
+	*cur = 0;
+
+	/* translate from chip bitmasks */
+	if (regval & WakePhy)
+		*cur |= WAKE_PHY;
+	if (regval & WakeUnicast)
+		*cur |= WAKE_UCAST;
+	if (regval & WakeMulticast)
+		*cur |= WAKE_MCAST;
+	if (regval & WakeBroadcast)
+		*cur |= WAKE_BCAST;
+	if (regval & WakeArp)
+		*cur |= WAKE_ARP;
+	if (regval & WakeMagic)
+		*cur |= WAKE_MAGIC;
+	if (regval & WakeMagicSecure) {
+		/* this can be on in revC, but it's broken */
+		*cur |= WAKE_MAGICSECURE;
+	}
+
+	return 0;
+}
+
+static int netdev_set_sopass(struct net_device *dev, u8 *newval)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem * ioaddr = ns_ioaddr(dev);
+	u16 *sval = (u16 *)newval;
+	u32 addr;
+
+	if (np->srr < SRR_DP83815_D) {
+		return 0;
+	}
+
+	/* enable writing to these registers by disabling the RX filter */
+	addr = readl(ioaddr + RxFilterAddr) & ~RFCRAddressMask;
+	addr &= ~RxFilterEnable;
+	writel(addr, ioaddr + RxFilterAddr);
+
+	/* write the three words to (undocumented) RFCR vals 0xa, 0xc, 0xe */
+	writel(addr | 0xa, ioaddr + RxFilterAddr);
+	writew(sval[0], ioaddr + RxFilterData);
+
+	writel(addr | 0xc, ioaddr + RxFilterAddr);
+	writew(sval[1], ioaddr + RxFilterData);
+
+	writel(addr | 0xe, ioaddr + RxFilterAddr);
+	writew(sval[2], ioaddr + RxFilterData);
+
+	/* re-enable the RX filter */
+	writel(addr | RxFilterEnable, ioaddr + RxFilterAddr);
+
+	return 0;
+}
+
+static int netdev_get_sopass(struct net_device *dev, u8 *data)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem * ioaddr = ns_ioaddr(dev);
+	u16 *sval = (u16 *)data;
+	u32 addr;
+
+	if (np->srr < SRR_DP83815_D) {
+		sval[0] = sval[1] = sval[2] = 0;
+		return 0;
+	}
+
+	/* read the three words from (undocumented) RFCR vals 0xa, 0xc, 0xe */
+	addr = readl(ioaddr + RxFilterAddr) & ~RFCRAddressMask;
+
+	writel(addr | 0xa, ioaddr + RxFilterAddr);
+	sval[0] = readw(ioaddr + RxFilterData);
+
+	writel(addr | 0xc, ioaddr + RxFilterAddr);
+	sval[1] = readw(ioaddr + RxFilterData);
+
+	writel(addr | 0xe, ioaddr + RxFilterAddr);
+	sval[2] = readw(ioaddr + RxFilterData);
+
+	writel(addr, ioaddr + RxFilterAddr);
+
+	return 0;
+}
+
+static int netdev_get_ecmd(struct net_device *dev,
+			   struct ethtool_link_ksettings *ecmd)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	u32 supported, advertising;
+	u32 tmp;
+
+	ecmd->base.port   = dev->if_port;
+	ecmd->base.speed  = np->speed;
+	ecmd->base.duplex = np->duplex;
+	ecmd->base.autoneg = np->autoneg;
+	advertising = 0;
+
+	if (np->advertising & ADVERTISE_10HALF)
+		advertising |= ADVERTISED_10baseT_Half;
+	if (np->advertising & ADVERTISE_10FULL)
+		advertising |= ADVERTISED_10baseT_Full;
+	if (np->advertising & ADVERTISE_100HALF)
+		advertising |= ADVERTISED_100baseT_Half;
+	if (np->advertising & ADVERTISE_100FULL)
+		advertising |= ADVERTISED_100baseT_Full;
+	supported   = (SUPPORTED_Autoneg |
+		SUPPORTED_10baseT_Half  | SUPPORTED_10baseT_Full  |
+		SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |
+		SUPPORTED_TP | SUPPORTED_MII | SUPPORTED_FIBRE);
+	ecmd->base.phy_address = np->phy_addr_external;
+	/*
+	 * We intentionally report the phy address of the external
+	 * phy, even if the internal phy is used. This is necessary
+	 * to work around a deficiency of the ethtool interface:
+	 * It's only possible to query the settings of the active
+	 * port. Therefore
+	 * # ethtool -s ethX port mii
+	 * actually sends an ioctl to switch to port mii with the
+	 * settings that are used for the current active port.
+	 * If we would report a different phy address in this
+	 * command, then
+	 * # ethtool -s ethX port tp;ethtool -s ethX port mii
+	 * would unintentionally change the phy address.
+	 *
+	 * Fortunately the phy address doesn't matter with the
+	 * internal phy...
+	 */
+
+	/* set information based on active port type */
+	switch (ecmd->base.port) {
+	default:
+	case PORT_TP:
+		advertising |= ADVERTISED_TP;
+		break;
+	case PORT_MII:
+		advertising |= ADVERTISED_MII;
+		break;
+	case PORT_FIBRE:
+		advertising |= ADVERTISED_FIBRE;
+		break;
+	}
+
+	/* if autonegotiation is on, try to return the active speed/duplex */
+	if (ecmd->base.autoneg == AUTONEG_ENABLE) {
+		advertising |= ADVERTISED_Autoneg;
+		tmp = mii_nway_result(
+			np->advertising & mdio_read(dev, MII_LPA));
+		if (tmp == LPA_100FULL || tmp == LPA_100HALF)
+			ecmd->base.speed = SPEED_100;
+		else
+			ecmd->base.speed = SPEED_10;
+		if (tmp == LPA_100FULL || tmp == LPA_10FULL)
+			ecmd->base.duplex = DUPLEX_FULL;
+		else
+			ecmd->base.duplex = DUPLEX_HALF;
+	}
+
+	/* ignore maxtxpkt, maxrxpkt for now */
+
+	ethtool_convert_legacy_u32_to_link_mode(ecmd->link_modes.supported,
+						supported);
+	ethtool_convert_legacy_u32_to_link_mode(ecmd->link_modes.advertising,
+						advertising);
+
+	return 0;
+}
+
+static int netdev_set_ecmd(struct net_device *dev,
+			   const struct ethtool_link_ksettings *ecmd)
+{
+	struct netdev_private *np = netdev_priv(dev);
+	u32 advertising;
+
+	ethtool_convert_link_mode_to_legacy_u32(&advertising,
+						ecmd->link_modes.advertising);
+
+	if (ecmd->base.port != PORT_TP &&
+	    ecmd->base.port != PORT_MII &&
+	    ecmd->base.port != PORT_FIBRE)
+		return -EINVAL;
+	if (ecmd->base.autoneg == AUTONEG_ENABLE) {
+		if ((advertising & (ADVERTISED_10baseT_Half |
+					  ADVERTISED_10baseT_Full |
+					  ADVERTISED_100baseT_Half |
+					  ADVERTISED_100baseT_Full)) == 0) {
+			return -EINVAL;
+		}
+	} else if (ecmd->base.autoneg == AUTONEG_DISABLE) {
+		u32 speed = ecmd->base.speed;
+		if (speed != SPEED_10 && speed != SPEED_100)
+			return -EINVAL;
+		if (ecmd->base.duplex != DUPLEX_HALF &&
+		    ecmd->base.duplex != DUPLEX_FULL)
+			return -EINVAL;
+	} else {
+		return -EINVAL;
+	}
+
+	/*
+	 * If we're ignoring the PHY then autoneg and the internal
+	 * transceiver are really not going to work so don't let the
+	 * user select them.
+	 */
+	if (np->ignore_phy && (ecmd->base.autoneg == AUTONEG_ENABLE ||
+			       ecmd->base.port == PORT_TP))
+		return -EINVAL;
+
+	/*
+	 * maxtxpkt, maxrxpkt: ignored for now.
+	 *
+	 * transceiver:
+	 * PORT_TP is always XCVR_INTERNAL, PORT_MII and PORT_FIBRE are always
+	 * XCVR_EXTERNAL. The implementation thus ignores ecmd->transceiver and
+	 * selects based on ecmd->port.
+	 *
+	 * Actually PORT_FIBRE is nearly identical to PORT_MII: it's for fibre
+	 * phys that are connected to the mii bus. It's used to apply fibre
+	 * specific updates.
+	 */
+
+	/* WHEW! now lets bang some bits */
+
+	/* save the parms */
+	dev->if_port          = ecmd->base.port;
+	np->autoneg           = ecmd->base.autoneg;
+	np->phy_addr_external = ecmd->base.phy_address & PhyAddrMask;
+	if (np->autoneg == AUTONEG_ENABLE) {
+		/* advertise only what has been requested */
+		np->advertising &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
+		if (advertising & ADVERTISED_10baseT_Half)
+			np->advertising |= ADVERTISE_10HALF;
+		if (advertising & ADVERTISED_10baseT_Full)
+			np->advertising |= ADVERTISE_10FULL;
+		if (advertising & ADVERTISED_100baseT_Half)
+			np->advertising |= ADVERTISE_100HALF;
+		if (advertising & ADVERTISED_100baseT_Full)
+			np->advertising |= ADVERTISE_100FULL;
+	} else {
+		np->speed  = ecmd->base.speed;
+		np->duplex = ecmd->base.duplex;
+		/* user overriding the initial full duplex parm? */
+		if (np->duplex == DUPLEX_HALF)
+			np->full_duplex = 0;
+	}
+
+	/* get the right phy enabled */
+	if (ecmd->base.port == PORT_TP)
+		switch_port_internal(dev);
+	else
+		switch_port_external(dev);
+
+	/* set parms and see how this affected our link status */
+	init_phy_fixup(dev);
+	check_link(dev);
+	return 0;
+}
+
+static int netdev_get_regs(struct net_device *dev, u8 *buf)
+{
+	int i;
+	int j;
+	u32 rfcr;
+	u32 *rbuf = (u32 *)buf;
+	void __iomem * ioaddr = ns_ioaddr(dev);
+
+	/* read non-mii page 0 of registers */
+	for (i = 0; i < NATSEMI_PG0_NREGS/2; i++) {
+		rbuf[i] = readl(ioaddr + i*4);
+	}
+
+	/* read current mii registers */
+	for (i = NATSEMI_PG0_NREGS/2; i < NATSEMI_PG0_NREGS; i++)
+		rbuf[i] = mdio_read(dev, i & 0x1f);
+
+	/* read only the 'magic' registers from page 1 */
+	writew(1, ioaddr + PGSEL);
+	rbuf[i++] = readw(ioaddr + PMDCSR);
+	rbuf[i++] = readw(ioaddr + TSTDAT);
+	rbuf[i++] = readw(ioaddr + DSPCFG);
+	rbuf[i++] = readw(ioaddr + SDCFG);
+	writew(0, ioaddr + PGSEL);
+
+	/* read RFCR indexed registers */
+	rfcr = readl(ioaddr + RxFilterAddr);
+	for (j = 0; j < NATSEMI_RFDR_NREGS; j++) {
+		writel(j*2, ioaddr + RxFilterAddr);
+		rbuf[i++] = readw(ioaddr + RxFilterData);
+	}
+	writel(rfcr, ioaddr + RxFilterAddr);
+
+	/* the interrupt status is clear-on-read - see if we missed any */
+	if (rbuf[4] & rbuf[5]) {
+		printk(KERN_WARNING
+			"%s: shoot, we dropped an interrupt (%#08x)\n",
+			dev->name, rbuf[4] & rbuf[5]);
+	}
+
+	return 0;
+}
+
+#define SWAP_BITS(x)	( (((x) & 0x0001) << 15) | (((x) & 0x0002) << 13) \
+			| (((x) & 0x0004) << 11) | (((x) & 0x0008) << 9)  \
+			| (((x) & 0x0010) << 7)  | (((x) & 0x0020) << 5)  \
+			| (((x) & 0x0040) << 3)  | (((x) & 0x0080) << 1)  \
+			| (((x) & 0x0100) >> 1)  | (((x) & 0x0200) >> 3)  \
+			| (((x) & 0x0400) >> 5)  | (((x) & 0x0800) >> 7)  \
+			| (((x) & 0x1000) >> 9)  | (((x) & 0x2000) >> 11) \
+			| (((x) & 0x4000) >> 13) | (((x) & 0x8000) >> 15) )
+
+static int netdev_get_eeprom(struct net_device *dev, u8 *buf)
+{
+	int i;
+	u16 *ebuf = (u16 *)buf;
+	void __iomem * ioaddr = ns_ioaddr(dev);
+	struct netdev_private *np = netdev_priv(dev);
+
+	/* eeprom_read reads 16 bits, and indexes by 16 bits */
+	for (i = 0; i < np->eeprom_size/2; i++) {
+		ebuf[i] = eeprom_read(ioaddr, i);
+		/* The EEPROM itself stores data bit-swapped, but eeprom_read
+		 * reads it back "sanely". So we swap it back here in order to
+		 * present it to userland as it is stored. */
+		ebuf[i] = SWAP_BITS(ebuf[i]);
+	}
+	return 0;
+}
+
+static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+	struct mii_ioctl_data *data = if_mii(rq);
+	struct netdev_private *np = netdev_priv(dev);
+
+	switch(cmd) {
+	case SIOCGMIIPHY:		/* Get address of MII PHY in use. */
+		data->phy_id = np->phy_addr_external;
+		/* Fall Through */
+
+	case SIOCGMIIREG:		/* Read MII PHY register. */
+		/* The phy_id is not enough to uniquely identify
+		 * the intended target. Therefore the command is sent to
+		 * the given mii on the current port.
+		 */
+		if (dev->if_port == PORT_TP) {
+			if ((data->phy_id & 0x1f) == np->phy_addr_external)
+				data->val_out = mdio_read(dev,
+							data->reg_num & 0x1f);
+			else
+				data->val_out = 0;
+		} else {
+			move_int_phy(dev, data->phy_id & 0x1f);
+			data->val_out = miiport_read(dev, data->phy_id & 0x1f,
+							data->reg_num & 0x1f);
+		}
+		return 0;
+
+	case SIOCSMIIREG:		/* Write MII PHY register. */
+		if (dev->if_port == PORT_TP) {
+			if ((data->phy_id & 0x1f) == np->phy_addr_external) {
+ 				if ((data->reg_num & 0x1f) == MII_ADVERTISE)
+					np->advertising = data->val_in;
+				mdio_write(dev, data->reg_num & 0x1f,
+							data->val_in);
+			}
+		} else {
+			if ((data->phy_id & 0x1f) == np->phy_addr_external) {
+ 				if ((data->reg_num & 0x1f) == MII_ADVERTISE)
+					np->advertising = data->val_in;
+			}
+			move_int_phy(dev, data->phy_id & 0x1f);
+			miiport_write(dev, data->phy_id & 0x1f,
+						data->reg_num & 0x1f,
+						data->val_in);
+		}
+		return 0;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static void enable_wol_mode(struct net_device *dev, int enable_intr)
+{
+	void __iomem * ioaddr = ns_ioaddr(dev);
+	struct netdev_private *np = netdev_priv(dev);
+
+	if (netif_msg_wol(np))
+		printk(KERN_INFO "%s: remaining active for wake-on-lan\n",
+			dev->name);
+
+	/* For WOL we must restart the rx process in silent mode.
+	 * Write NULL to the RxRingPtr. Only possible if
+	 * rx process is stopped
+	 */
+	writel(0, ioaddr + RxRingPtr);
+
+	/* read WoL status to clear */
+	readl(ioaddr + WOLCmd);
+
+	/* PME on, clear status */
+	writel(np->SavedClkRun | PMEEnable | PMEStatus, ioaddr + ClkRun);
+
+	/* and restart the rx process */
+	writel(RxOn, ioaddr + ChipCmd);
+
+	if (enable_intr) {
+		/* enable the WOL interrupt.
+		 * Could be used to send a netlink message.
+		 */
+		writel(WOLPkt | LinkChange, ioaddr + IntrMask);
+		natsemi_irq_enable(dev);
+	}
+}
+
+static int netdev_close(struct net_device *dev)
+{
+	void __iomem * ioaddr = ns_ioaddr(dev);
+	struct netdev_private *np = netdev_priv(dev);
+	const int irq = np->pci_dev->irq;
+
+	if (netif_msg_ifdown(np))
+		printk(KERN_DEBUG
+			"%s: Shutting down ethercard, status was %#04x.\n",
+			dev->name, (int)readl(ioaddr + ChipCmd));
+	if (netif_msg_pktdata(np))
+		printk(KERN_DEBUG
+			"%s: Queue pointers were Tx %d / %d,  Rx %d / %d.\n",
+			dev->name, np->cur_tx, np->dirty_tx,
+			np->cur_rx, np->dirty_rx);
+
+	napi_disable(&np->napi);
+
+	/*
+	 * FIXME: what if someone tries to close a device
+	 * that is suspended?
+	 * Should we reenable the nic to switch to
+	 * the final WOL settings?
+	 */
+
+	del_timer_sync(&np->timer);
+	disable_irq(irq);
+	spin_lock_irq(&np->lock);
+	natsemi_irq_disable(dev);
+	np->hands_off = 1;
+	spin_unlock_irq(&np->lock);
+	enable_irq(irq);
+
+	free_irq(irq, dev);
+
+	/* Interrupt disabled, interrupt handler released,
+	 * queue stopped, timer deleted, rtnl_lock held
+	 * All async codepaths that access the driver are disabled.
+	 */
+	spin_lock_irq(&np->lock);
+	np->hands_off = 0;
+	readl(ioaddr + IntrMask);
+	readw(ioaddr + MIntrStatus);
+
+	/* Freeze Stats */
+	writel(StatsFreeze, ioaddr + StatsCtrl);
+
+	/* Stop the chip's Tx and Rx processes. */
+	natsemi_stop_rxtx(dev);
+
+	__get_stats(dev);
+	spin_unlock_irq(&np->lock);
+
+	/* clear the carrier last - an interrupt could reenable it otherwise */
+	netif_carrier_off(dev);
+	netif_stop_queue(dev);
+
+	dump_ring(dev);
+	drain_ring(dev);
+	free_ring(dev);
+
+	{
+		u32 wol = readl(ioaddr + WOLCmd) & WakeOptsSummary;
+		if (wol) {
+			/* restart the NIC in WOL mode.
+			 * The nic must be stopped for this.
+			 */
+			enable_wol_mode(dev, 0);
+		} else {
+			/* Restore PME enable bit unmolested */
+			writel(np->SavedClkRun, ioaddr + ClkRun);
+		}
+	}
+	return 0;
+}
+
+
+static void natsemi_remove1(struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	void __iomem * ioaddr = ns_ioaddr(dev);
+
+	NATSEMI_REMOVE_FILE(pdev, dspcfg_workaround);
+	unregister_netdev (dev);
+	iounmap(ioaddr);
+	free_netdev (dev);
+}
+
+#ifdef CONFIG_PM
+
+/*
+ * The ns83815 chip doesn't have explicit RxStop bits.
+ * Kicking the Rx or Tx process for a new packet reenables the Rx process
+ * of the nic, thus this function must be very careful:
+ *
+ * suspend/resume synchronization:
+ * entry points:
+ *   netdev_open, netdev_close, netdev_ioctl, set_rx_mode, intr_handler,
+ *   start_tx, ns_tx_timeout
+ *
+ * No function accesses the hardware without checking np->hands_off.
+ *	the check occurs under spin_lock_irq(&np->lock);
+ * exceptions:
+ *	* netdev_ioctl: noncritical access.
+ *	* netdev_open: cannot happen due to the device_detach
+ *	* netdev_close: doesn't hurt.
+ *	* netdev_timer: timer stopped by natsemi_suspend.
+ *	* intr_handler: doesn't acquire the spinlock. suspend calls
+ *		disable_irq() to enforce synchronization.
+ *      * natsemi_poll: checks before reenabling interrupts.  suspend
+ *              sets hands_off, disables interrupts and then waits with
+ *              napi_disable().
+ *
+ * Interrupts must be disabled, otherwise hands_off can cause irq storms.
+ */
+
+static int natsemi_suspend (struct pci_dev *pdev, pm_message_t state)
+{
+	struct net_device *dev = pci_get_drvdata (pdev);
+	struct netdev_private *np = netdev_priv(dev);
+	void __iomem * ioaddr = ns_ioaddr(dev);
+
+	rtnl_lock();
+	if (netif_running (dev)) {
+		const int irq = np->pci_dev->irq;
+
+		del_timer_sync(&np->timer);
+
+		disable_irq(irq);
+		spin_lock_irq(&np->lock);
+
+		natsemi_irq_disable(dev);
+		np->hands_off = 1;
+		natsemi_stop_rxtx(dev);
+		netif_stop_queue(dev);
+
+		spin_unlock_irq(&np->lock);
+		enable_irq(irq);
+
+		napi_disable(&np->napi);
+
+		/* Update the error counts. */
+		__get_stats(dev);
+
+		/* pci_power_off(pdev, -1); */
+		drain_ring(dev);
+		{
+			u32 wol = readl(ioaddr + WOLCmd) & WakeOptsSummary;
+			/* Restore PME enable bit */
+			if (wol) {
+				/* restart the NIC in WOL mode.
+				 * The nic must be stopped for this.
+				 * FIXME: use the WOL interrupt
+				 */
+				enable_wol_mode(dev, 0);
+			} else {
+				/* Restore PME enable bit unmolested */
+				writel(np->SavedClkRun, ioaddr + ClkRun);
+			}
+		}
+	}
+	netif_device_detach(dev);
+	rtnl_unlock();
+	return 0;
+}
+
+
+static int natsemi_resume (struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata (pdev);
+	struct netdev_private *np = netdev_priv(dev);
+	int ret = 0;
+
+	rtnl_lock();
+	if (netif_device_present(dev))
+		goto out;
+	if (netif_running(dev)) {
+		const int irq = np->pci_dev->irq;
+
+		BUG_ON(!np->hands_off);
+		ret = pci_enable_device(pdev);
+		if (ret < 0) {
+			dev_err(&pdev->dev,
+				"pci_enable_device() failed: %d\n", ret);
+			goto out;
+		}
+	/*	pci_power_on(pdev); */
+
+		napi_enable(&np->napi);
+
+		natsemi_reset(dev);
+		init_ring(dev);
+		disable_irq(irq);
+		spin_lock_irq(&np->lock);
+		np->hands_off = 0;
+		init_registers(dev);
+		netif_device_attach(dev);
+		spin_unlock_irq(&np->lock);
+		enable_irq(irq);
+
+		mod_timer(&np->timer, round_jiffies(jiffies + 1*HZ));
+	}
+	netif_device_attach(dev);
+out:
+	rtnl_unlock();
+	return ret;
+}
+
+#endif /* CONFIG_PM */
+
+static struct pci_driver natsemi_driver = {
+	.name		= DRV_NAME,
+	.id_table	= natsemi_pci_tbl,
+	.probe		= natsemi_probe1,
+	.remove		= natsemi_remove1,
+#ifdef CONFIG_PM
+	.suspend	= natsemi_suspend,
+	.resume		= natsemi_resume,
+#endif
+};
+
+static int __init natsemi_init_mod (void)
+{
+/* when a module, this is printed whether or not devices are found in probe */
+#ifdef MODULE
+	printk(version);
+#endif
+
+	return pci_register_driver(&natsemi_driver);
+}
+
+static void __exit natsemi_exit_mod (void)
+{
+	pci_unregister_driver (&natsemi_driver);
+}
+
+module_init(natsemi_init_mod);
+module_exit(natsemi_exit_mod);
+
diff --git a/drivers/net/ethernet/natsemi/ns83820.c b/drivers/net/ethernet/natsemi/ns83820.c
new file mode 100644
index 000000000..958fced4d
--- /dev/null
+++ b/drivers/net/ethernet/natsemi/ns83820.c
@@ -0,0 +1,2302 @@
+#define VERSION "0.23"
+/* ns83820.c by Benjamin LaHaise with contributions.
+ *
+ * Questions/comments/discussion to linux-ns83820@kvack.org.
+ *
+ * $Revision: 1.34.2.23 $
+ *
+ * Copyright 2001 Benjamin LaHaise.
+ * Copyright 2001, 2002 Red Hat.
+ *
+ * Mmmm, chocolate vanilla mocha...
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ *
+ * ChangeLog
+ * =========
+ *	20010414	0.1 - created
+ *	20010622	0.2 - basic rx and tx.
+ *	20010711	0.3 - added duplex and link state detection support.
+ *	20010713	0.4 - zero copy, no hangs.
+ *			0.5 - 64 bit dma support (davem will hate me for this)
+ *			    - disable jumbo frames to avoid tx hangs
+ *			    - work around tx deadlocks on my 1.02 card via
+ *			      fiddling with TXCFG
+ *	20010810	0.6 - use pci dma api for ringbuffers, work on ia64
+ *	20010816	0.7 - misc cleanups
+ *	20010826	0.8 - fix critical zero copy bugs
+ *			0.9 - internal experiment
+ *	20010827	0.10 - fix ia64 unaligned access.
+ *	20010906	0.11 - accept all packets with checksum errors as
+ *			       otherwise fragments get lost
+ *			     - fix >> 32 bugs
+ *			0.12 - add statistics counters
+ *			     - add allmulti/promisc support
+ *	20011009	0.13 - hotplug support, other smaller pci api cleanups
+ *	20011204	0.13a - optical transceiver support added
+ *				by Michael Clark <michael@metaparadigm.com>
+ *	20011205	0.13b - call register_netdev earlier in initialization
+ *				suppress duplicate link status messages
+ *	20011117 	0.14 - ethtool GDRVINFO, GLINK support from jgarzik
+ *	20011204 	0.15	get ppc (big endian) working
+ *	20011218	0.16	various cleanups
+ *	20020310	0.17	speedups
+ *	20020610	0.18 -	actually use the pci dma api for highmem
+ *			     -	remove pci latency register fiddling
+ *			0.19 -	better bist support
+ *			     -	add ihr and reset_phy parameters
+ *			     -	gmii bus probing
+ *			     -	fix missed txok introduced during performance
+ *				tuning
+ *			0.20 -	fix stupid RFEN thinko.  i am such a smurf.
+ *	20040828	0.21 -	add hardware vlan accleration
+ *				by Neil Horman <nhorman@redhat.com>
+ *	20050406	0.22 -	improved DAC ifdefs from Andi Kleen
+ *			     -	removal of dead code from Adrian Bunk
+ *			     -	fix half duplex collision behaviour
+ * Driver Overview
+ * ===============
+ *
+ * This driver was originally written for the National Semiconductor
+ * 83820 chip, a 10/100/1000 Mbps 64 bit PCI ethernet NIC.  Hopefully
+ * this code will turn out to be a) clean, b) correct, and c) fast.
+ * With that in mind, I'm aiming to split the code up as much as
+ * reasonably possible.  At present there are X major sections that
+ * break down into a) packet receive, b) packet transmit, c) link
+ * management, d) initialization and configuration.  Where possible,
+ * these code paths are designed to run in parallel.
+ *
+ * This driver has been tested and found to work with the following
+ * cards (in no particular order):
+ *
+ *	Cameo		SOHO-GA2000T	SOHO-GA2500T
+ *	D-Link		DGE-500T
+ *	PureData	PDP8023Z-TG
+ *	SMC		SMC9452TX	SMC9462TX
+ *	Netgear		GA621
+ *
+ * Special thanks to SMC for providing hardware to test this driver on.
+ *
+ * Reports of success or failure would be greatly appreciated.
+ */
+//#define dprintk		printk
+#define dprintk(x...)		do { } while (0)
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/delay.h>
+#include <linux/workqueue.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ip.h>	/* for iph */
+#include <linux/in.h>	/* for IPPROTO_... */
+#include <linux/compiler.h>
+#include <linux/prefetch.h>
+#include <linux/ethtool.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/if_vlan.h>
+#include <linux/rtnetlink.h>
+#include <linux/jiffies.h>
+#include <linux/slab.h>
+
+#include <asm/io.h>
+#include <linux/uaccess.h>
+
+#define DRV_NAME "ns83820"
+
+/* Global parameters.  See module_param near the bottom. */
+static int ihr = 2;
+static int reset_phy = 0;
+static int lnksts = 0;		/* CFG_LNKSTS bit polarity */
+
+/* Dprintk is used for more interesting debug events */
+#undef Dprintk
+#define	Dprintk			dprintk
+
+/* tunables */
+#define RX_BUF_SIZE	1500	/* 8192 */
+#if IS_ENABLED(CONFIG_VLAN_8021Q)
+#define NS83820_VLAN_ACCEL_SUPPORT
+#endif
+
+/* Must not exceed ~65000. */
+#define NR_RX_DESC	64
+#define NR_TX_DESC	128
+
+/* not tunable */
+#define REAL_RX_BUF_SIZE (RX_BUF_SIZE + 14)	/* rx/tx mac addr + type */
+
+#define MIN_TX_DESC_FREE	8
+
+/* register defines */
+#define CFGCS		0x04
+
+#define CR_TXE		0x00000001
+#define CR_TXD		0x00000002
+/* Ramit : Here's a tip, don't do a RXD immediately followed by an RXE
+ * The Receive engine skips one descriptor and moves
+ * onto the next one!! */
+#define CR_RXE		0x00000004
+#define CR_RXD		0x00000008
+#define CR_TXR		0x00000010
+#define CR_RXR		0x00000020
+#define CR_SWI		0x00000080
+#define CR_RST		0x00000100
+
+#define PTSCR_EEBIST_FAIL       0x00000001
+#define PTSCR_EEBIST_EN         0x00000002
+#define PTSCR_EELOAD_EN         0x00000004
+#define PTSCR_RBIST_FAIL        0x000001b8
+#define PTSCR_RBIST_DONE        0x00000200
+#define PTSCR_RBIST_EN          0x00000400
+#define PTSCR_RBIST_RST         0x00002000
+
+#define MEAR_EEDI		0x00000001
+#define MEAR_EEDO		0x00000002
+#define MEAR_EECLK		0x00000004
+#define MEAR_EESEL		0x00000008
+#define MEAR_MDIO		0x00000010
+#define MEAR_MDDIR		0x00000020
+#define MEAR_MDC		0x00000040
+
+#define ISR_TXDESC3	0x40000000
+#define ISR_TXDESC2	0x20000000
+#define ISR_TXDESC1	0x10000000
+#define ISR_TXDESC0	0x08000000
+#define ISR_RXDESC3	0x04000000
+#define ISR_RXDESC2	0x02000000
+#define ISR_RXDESC1	0x01000000
+#define ISR_RXDESC0	0x00800000
+#define ISR_TXRCMP	0x00400000
+#define ISR_RXRCMP	0x00200000
+#define ISR_DPERR	0x00100000
+#define ISR_SSERR	0x00080000
+#define ISR_RMABT	0x00040000
+#define ISR_RTABT	0x00020000
+#define ISR_RXSOVR	0x00010000
+#define ISR_HIBINT	0x00008000
+#define ISR_PHY		0x00004000
+#define ISR_PME		0x00002000
+#define ISR_SWI		0x00001000
+#define ISR_MIB		0x00000800
+#define ISR_TXURN	0x00000400
+#define ISR_TXIDLE	0x00000200
+#define ISR_TXERR	0x00000100
+#define ISR_TXDESC	0x00000080
+#define ISR_TXOK	0x00000040
+#define ISR_RXORN	0x00000020
+#define ISR_RXIDLE	0x00000010
+#define ISR_RXEARLY	0x00000008
+#define ISR_RXERR	0x00000004
+#define ISR_RXDESC	0x00000002
+#define ISR_RXOK	0x00000001
+
+#define TXCFG_CSI	0x80000000
+#define TXCFG_HBI	0x40000000
+#define TXCFG_MLB	0x20000000
+#define TXCFG_ATP	0x10000000
+#define TXCFG_ECRETRY	0x00800000
+#define TXCFG_BRST_DIS	0x00080000
+#define TXCFG_MXDMA1024	0x00000000
+#define TXCFG_MXDMA512	0x00700000
+#define TXCFG_MXDMA256	0x00600000
+#define TXCFG_MXDMA128	0x00500000
+#define TXCFG_MXDMA64	0x00400000
+#define TXCFG_MXDMA32	0x00300000
+#define TXCFG_MXDMA16	0x00200000
+#define TXCFG_MXDMA8	0x00100000
+
+#define CFG_LNKSTS	0x80000000
+#define CFG_SPDSTS	0x60000000
+#define CFG_SPDSTS1	0x40000000
+#define CFG_SPDSTS0	0x20000000
+#define CFG_DUPSTS	0x10000000
+#define CFG_TBI_EN	0x01000000
+#define CFG_MODE_1000	0x00400000
+/* Ramit : Dont' ever use AUTO_1000, it never works and is buggy.
+ * Read the Phy response and then configure the MAC accordingly */
+#define CFG_AUTO_1000	0x00200000
+#define CFG_PINT_CTL	0x001c0000
+#define CFG_PINT_DUPSTS	0x00100000
+#define CFG_PINT_LNKSTS	0x00080000
+#define CFG_PINT_SPDSTS	0x00040000
+#define CFG_TMRTEST	0x00020000
+#define CFG_MRM_DIS	0x00010000
+#define CFG_MWI_DIS	0x00008000
+#define CFG_T64ADDR	0x00004000
+#define CFG_PCI64_DET	0x00002000
+#define CFG_DATA64_EN	0x00001000
+#define CFG_M64ADDR	0x00000800
+#define CFG_PHY_RST	0x00000400
+#define CFG_PHY_DIS	0x00000200
+#define CFG_EXTSTS_EN	0x00000100
+#define CFG_REQALG	0x00000080
+#define CFG_SB		0x00000040
+#define CFG_POW		0x00000020
+#define CFG_EXD		0x00000010
+#define CFG_PESEL	0x00000008
+#define CFG_BROM_DIS	0x00000004
+#define CFG_EXT_125	0x00000002
+#define CFG_BEM		0x00000001
+
+#define EXTSTS_UDPPKT	0x00200000
+#define EXTSTS_TCPPKT	0x00080000
+#define EXTSTS_IPPKT	0x00020000
+#define EXTSTS_VPKT	0x00010000
+#define EXTSTS_VTG_MASK	0x0000ffff
+
+#define SPDSTS_POLARITY	(CFG_SPDSTS1 | CFG_SPDSTS0 | CFG_DUPSTS | (lnksts ? CFG_LNKSTS : 0))
+
+#define MIBC_MIBS	0x00000008
+#define MIBC_ACLR	0x00000004
+#define MIBC_FRZ	0x00000002
+#define MIBC_WRN	0x00000001
+
+#define PCR_PSEN	(1 << 31)
+#define PCR_PS_MCAST	(1 << 30)
+#define PCR_PS_DA	(1 << 29)
+#define PCR_STHI_8	(3 << 23)
+#define PCR_STLO_4	(1 << 23)
+#define PCR_FFHI_8K	(3 << 21)
+#define PCR_FFLO_4K	(1 << 21)
+#define PCR_PAUSE_CNT	0xFFFE
+
+#define RXCFG_AEP	0x80000000
+#define RXCFG_ARP	0x40000000
+#define RXCFG_STRIPCRC	0x20000000
+#define RXCFG_RX_FD	0x10000000
+#define RXCFG_ALP	0x08000000
+#define RXCFG_AIRL	0x04000000
+#define RXCFG_MXDMA512	0x00700000
+#define RXCFG_DRTH	0x0000003e
+#define RXCFG_DRTH0	0x00000002
+
+#define RFCR_RFEN	0x80000000
+#define RFCR_AAB	0x40000000
+#define RFCR_AAM	0x20000000
+#define RFCR_AAU	0x10000000
+#define RFCR_APM	0x08000000
+#define RFCR_APAT	0x07800000
+#define RFCR_APAT3	0x04000000
+#define RFCR_APAT2	0x02000000
+#define RFCR_APAT1	0x01000000
+#define RFCR_APAT0	0x00800000
+#define RFCR_AARP	0x00400000
+#define RFCR_MHEN	0x00200000
+#define RFCR_UHEN	0x00100000
+#define RFCR_ULM	0x00080000
+
+#define VRCR_RUDPE	0x00000080
+#define VRCR_RTCPE	0x00000040
+#define VRCR_RIPE	0x00000020
+#define VRCR_IPEN	0x00000010
+#define VRCR_DUTF	0x00000008
+#define VRCR_DVTF	0x00000004
+#define VRCR_VTREN	0x00000002
+#define VRCR_VTDEN	0x00000001
+
+#define VTCR_PPCHK	0x00000008
+#define VTCR_GCHK	0x00000004
+#define VTCR_VPPTI	0x00000002
+#define VTCR_VGTI	0x00000001
+
+#define CR		0x00
+#define CFG		0x04
+#define MEAR		0x08
+#define PTSCR		0x0c
+#define	ISR		0x10
+#define	IMR		0x14
+#define	IER		0x18
+#define	IHR		0x1c
+#define TXDP		0x20
+#define TXDP_HI		0x24
+#define TXCFG		0x28
+#define GPIOR		0x2c
+#define RXDP		0x30
+#define RXDP_HI		0x34
+#define RXCFG		0x38
+#define PQCR		0x3c
+#define WCSR		0x40
+#define PCR		0x44
+#define RFCR		0x48
+#define RFDR		0x4c
+
+#define SRR		0x58
+
+#define VRCR		0xbc
+#define VTCR		0xc0
+#define VDR		0xc4
+#define CCSR		0xcc
+
+#define TBICR		0xe0
+#define TBISR		0xe4
+#define TANAR		0xe8
+#define TANLPAR		0xec
+#define TANER		0xf0
+#define TESR		0xf4
+
+#define TBICR_MR_AN_ENABLE	0x00001000
+#define TBICR_MR_RESTART_AN	0x00000200
+
+#define TBISR_MR_LINK_STATUS	0x00000020
+#define TBISR_MR_AN_COMPLETE	0x00000004
+
+#define TANAR_PS2 		0x00000100
+#define TANAR_PS1 		0x00000080
+#define TANAR_HALF_DUP 		0x00000040
+#define TANAR_FULL_DUP 		0x00000020
+
+#define GPIOR_GP5_OE		0x00000200
+#define GPIOR_GP4_OE		0x00000100
+#define GPIOR_GP3_OE		0x00000080
+#define GPIOR_GP2_OE		0x00000040
+#define GPIOR_GP1_OE		0x00000020
+#define GPIOR_GP3_OUT		0x00000004
+#define GPIOR_GP1_OUT		0x00000001
+
+#define LINK_AUTONEGOTIATE	0x01
+#define LINK_DOWN		0x02
+#define LINK_UP			0x04
+
+#define HW_ADDR_LEN	sizeof(dma_addr_t)
+#define desc_addr_set(desc, addr)				\
+	do {							\
+		((desc)[0] = cpu_to_le32(addr));		\
+		if (HW_ADDR_LEN == 8)		 		\
+			(desc)[1] = cpu_to_le32(((u64)addr) >> 32);	\
+	} while(0)
+#define desc_addr_get(desc)					\
+	(le32_to_cpu((desc)[0]) | \
+	(HW_ADDR_LEN == 8 ? ((dma_addr_t)le32_to_cpu((desc)[1]))<<32 : 0))
+
+#define DESC_LINK		0
+#define DESC_BUFPTR		(DESC_LINK + HW_ADDR_LEN/4)
+#define DESC_CMDSTS		(DESC_BUFPTR + HW_ADDR_LEN/4)
+#define DESC_EXTSTS		(DESC_CMDSTS + 4/4)
+
+#define CMDSTS_OWN	0x80000000
+#define CMDSTS_MORE	0x40000000
+#define CMDSTS_INTR	0x20000000
+#define CMDSTS_ERR	0x10000000
+#define CMDSTS_OK	0x08000000
+#define CMDSTS_RUNT	0x00200000
+#define CMDSTS_LEN_MASK	0x0000ffff
+
+#define CMDSTS_DEST_MASK	0x01800000
+#define CMDSTS_DEST_SELF	0x00800000
+#define CMDSTS_DEST_MULTI	0x01000000
+
+#define DESC_SIZE	8		/* Should be cache line sized */
+
+struct rx_info {
+	spinlock_t	lock;
+	int		up;
+	unsigned long	idle;
+
+	struct sk_buff	*skbs[NR_RX_DESC];
+
+	__le32		*next_rx_desc;
+	u16		next_rx, next_empty;
+
+	__le32		*descs;
+	dma_addr_t	phy_descs;
+};
+
+
+struct ns83820 {
+	u8			__iomem *base;
+
+	struct pci_dev		*pci_dev;
+	struct net_device	*ndev;
+
+	struct rx_info		rx_info;
+	struct tasklet_struct	rx_tasklet;
+
+	unsigned		ihr;
+	struct work_struct	tq_refill;
+
+	/* protects everything below.  irqsave when using. */
+	spinlock_t		misc_lock;
+
+	u32			CFG_cache;
+
+	u32			MEAR_cache;
+	u32			IMR_cache;
+
+	unsigned		linkstate;
+
+	spinlock_t	tx_lock;
+
+	u16		tx_done_idx;
+	u16		tx_idx;
+	volatile u16	tx_free_idx;	/* idx of free desc chain */
+	u16		tx_intr_idx;
+
+	atomic_t	nr_tx_skbs;
+	struct sk_buff	*tx_skbs[NR_TX_DESC];
+
+	char		pad[16] __attribute__((aligned(16)));
+	__le32		*tx_descs;
+	dma_addr_t	tx_phy_descs;
+
+	struct timer_list	tx_watchdog;
+};
+
+static inline struct ns83820 *PRIV(struct net_device *dev)
+{
+	return netdev_priv(dev);
+}
+
+#define __kick_rx(dev)	writel(CR_RXE, dev->base + CR)
+
+static inline void kick_rx(struct net_device *ndev)
+{
+	struct ns83820 *dev = PRIV(ndev);
+	dprintk("kick_rx: maybe kicking\n");
+	if (test_and_clear_bit(0, &dev->rx_info.idle)) {
+		dprintk("actually kicking\n");
+		writel(dev->rx_info.phy_descs +
+			(4 * DESC_SIZE * dev->rx_info.next_rx),
+		       dev->base + RXDP);
+		if (dev->rx_info.next_rx == dev->rx_info.next_empty)
+			printk(KERN_DEBUG "%s: uh-oh: next_rx == next_empty???\n",
+				ndev->name);
+		__kick_rx(dev);
+	}
+}
+
+//free = (tx_done_idx + NR_TX_DESC-2 - free_idx) % NR_TX_DESC
+#define start_tx_okay(dev)	\
+	(((NR_TX_DESC-2 + dev->tx_done_idx - dev->tx_free_idx) % NR_TX_DESC) > MIN_TX_DESC_FREE)
+
+/* Packet Receiver
+ *
+ * The hardware supports linked lists of receive descriptors for
+ * which ownership is transferred back and forth by means of an
+ * ownership bit.  While the hardware does support the use of a
+ * ring for receive descriptors, we only make use of a chain in
+ * an attempt to reduce bus traffic under heavy load scenarios.
+ * This will also make bugs a bit more obvious.  The current code
+ * only makes use of a single rx chain; I hope to implement
+ * priority based rx for version 1.0.  Goal: even under overload
+ * conditions, still route realtime traffic with as low jitter as
+ * possible.
+ */
+static inline void build_rx_desc(struct ns83820 *dev, __le32 *desc, dma_addr_t link, dma_addr_t buf, u32 cmdsts, u32 extsts)
+{
+	desc_addr_set(desc + DESC_LINK, link);
+	desc_addr_set(desc + DESC_BUFPTR, buf);
+	desc[DESC_EXTSTS] = cpu_to_le32(extsts);
+	mb();
+	desc[DESC_CMDSTS] = cpu_to_le32(cmdsts);
+}
+
+#define nr_rx_empty(dev) ((NR_RX_DESC-2 + dev->rx_info.next_rx - dev->rx_info.next_empty) % NR_RX_DESC)
+static inline int ns83820_add_rx_skb(struct ns83820 *dev, struct sk_buff *skb)
+{
+	unsigned next_empty;
+	u32 cmdsts;
+	__le32 *sg;
+	dma_addr_t buf;
+
+	next_empty = dev->rx_info.next_empty;
+
+	/* don't overrun last rx marker */
+	if (unlikely(nr_rx_empty(dev) <= 2)) {
+		kfree_skb(skb);
+		return 1;
+	}
+
+#if 0
+	dprintk("next_empty[%d] nr_used[%d] next_rx[%d]\n",
+		dev->rx_info.next_empty,
+		dev->rx_info.nr_used,
+		dev->rx_info.next_rx
+		);
+#endif
+
+	sg = dev->rx_info.descs + (next_empty * DESC_SIZE);
+	BUG_ON(NULL != dev->rx_info.skbs[next_empty]);
+	dev->rx_info.skbs[next_empty] = skb;
+
+	dev->rx_info.next_empty = (next_empty + 1) % NR_RX_DESC;
+	cmdsts = REAL_RX_BUF_SIZE | CMDSTS_INTR;
+	buf = pci_map_single(dev->pci_dev, skb->data,
+			     REAL_RX_BUF_SIZE, PCI_DMA_FROMDEVICE);
+	build_rx_desc(dev, sg, 0, buf, cmdsts, 0);
+	/* update link of previous rx */
+	if (likely(next_empty != dev->rx_info.next_rx))
+		dev->rx_info.descs[((NR_RX_DESC + next_empty - 1) % NR_RX_DESC) * DESC_SIZE] = cpu_to_le32(dev->rx_info.phy_descs + (next_empty * DESC_SIZE * 4));
+
+	return 0;
+}
+
+static inline int rx_refill(struct net_device *ndev, gfp_t gfp)
+{
+	struct ns83820 *dev = PRIV(ndev);
+	unsigned i;
+	unsigned long flags = 0;
+
+	if (unlikely(nr_rx_empty(dev) <= 2))
+		return 0;
+
+	dprintk("rx_refill(%p)\n", ndev);
+	if (gfp == GFP_ATOMIC)
+		spin_lock_irqsave(&dev->rx_info.lock, flags);
+	for (i=0; i<NR_RX_DESC; i++) {
+		struct sk_buff *skb;
+		long res;
+
+		/* extra 16 bytes for alignment */
+		skb = __netdev_alloc_skb(ndev, REAL_RX_BUF_SIZE+16, gfp);
+		if (unlikely(!skb))
+			break;
+
+		skb_reserve(skb, skb->data - PTR_ALIGN(skb->data, 16));
+		if (gfp != GFP_ATOMIC)
+			spin_lock_irqsave(&dev->rx_info.lock, flags);
+		res = ns83820_add_rx_skb(dev, skb);
+		if (gfp != GFP_ATOMIC)
+			spin_unlock_irqrestore(&dev->rx_info.lock, flags);
+		if (res) {
+			i = 1;
+			break;
+		}
+	}
+	if (gfp == GFP_ATOMIC)
+		spin_unlock_irqrestore(&dev->rx_info.lock, flags);
+
+	return i ? 0 : -ENOMEM;
+}
+
+static void rx_refill_atomic(struct net_device *ndev)
+{
+	rx_refill(ndev, GFP_ATOMIC);
+}
+
+/* REFILL */
+static inline void queue_refill(struct work_struct *work)
+{
+	struct ns83820 *dev = container_of(work, struct ns83820, tq_refill);
+	struct net_device *ndev = dev->ndev;
+
+	rx_refill(ndev, GFP_KERNEL);
+	if (dev->rx_info.up)
+		kick_rx(ndev);
+}
+
+static inline void clear_rx_desc(struct ns83820 *dev, unsigned i)
+{
+	build_rx_desc(dev, dev->rx_info.descs + (DESC_SIZE * i), 0, 0, CMDSTS_OWN, 0);
+}
+
+static void phy_intr(struct net_device *ndev)
+{
+	struct ns83820 *dev = PRIV(ndev);
+	static const char *speeds[] = { "10", "100", "1000", "1000(?)", "1000F" };
+	u32 cfg, new_cfg;
+	u32 tbisr, tanar, tanlpar;
+	int speed, fullduplex, newlinkstate;
+
+	cfg = readl(dev->base + CFG) ^ SPDSTS_POLARITY;
+
+	if (dev->CFG_cache & CFG_TBI_EN) {
+		/* we have an optical transceiver */
+		tbisr = readl(dev->base + TBISR);
+		tanar = readl(dev->base + TANAR);
+		tanlpar = readl(dev->base + TANLPAR);
+		dprintk("phy_intr: tbisr=%08x, tanar=%08x, tanlpar=%08x\n",
+			tbisr, tanar, tanlpar);
+
+		if ( (fullduplex = (tanlpar & TANAR_FULL_DUP) &&
+		      (tanar & TANAR_FULL_DUP)) ) {
+
+			/* both of us are full duplex */
+			writel(readl(dev->base + TXCFG)
+			       | TXCFG_CSI | TXCFG_HBI | TXCFG_ATP,
+			       dev->base + TXCFG);
+			writel(readl(dev->base + RXCFG) | RXCFG_RX_FD,
+			       dev->base + RXCFG);
+			/* Light up full duplex LED */
+			writel(readl(dev->base + GPIOR) | GPIOR_GP1_OUT,
+			       dev->base + GPIOR);
+
+		} else if (((tanlpar & TANAR_HALF_DUP) &&
+			    (tanar & TANAR_HALF_DUP)) ||
+			   ((tanlpar & TANAR_FULL_DUP) &&
+			    (tanar & TANAR_HALF_DUP)) ||
+			   ((tanlpar & TANAR_HALF_DUP) &&
+			    (tanar & TANAR_FULL_DUP))) {
+
+			/* one or both of us are half duplex */
+			writel((readl(dev->base + TXCFG)
+				& ~(TXCFG_CSI | TXCFG_HBI)) | TXCFG_ATP,
+			       dev->base + TXCFG);
+			writel(readl(dev->base + RXCFG) & ~RXCFG_RX_FD,
+			       dev->base + RXCFG);
+			/* Turn off full duplex LED */
+			writel(readl(dev->base + GPIOR) & ~GPIOR_GP1_OUT,
+			       dev->base + GPIOR);
+		}
+
+		speed = 4; /* 1000F */
+
+	} else {
+		/* we have a copper transceiver */
+		new_cfg = dev->CFG_cache & ~(CFG_SB | CFG_MODE_1000 | CFG_SPDSTS);
+
+		if (cfg & CFG_SPDSTS1)
+			new_cfg |= CFG_MODE_1000;
+		else
+			new_cfg &= ~CFG_MODE_1000;
+
+		speed = ((cfg / CFG_SPDSTS0) & 3);
+		fullduplex = (cfg & CFG_DUPSTS);
+
+		if (fullduplex) {
+			new_cfg |= CFG_SB;
+			writel(readl(dev->base + TXCFG)
+					| TXCFG_CSI | TXCFG_HBI,
+			       dev->base + TXCFG);
+			writel(readl(dev->base + RXCFG) | RXCFG_RX_FD,
+			       dev->base + RXCFG);
+		} else {
+			writel(readl(dev->base + TXCFG)
+					& ~(TXCFG_CSI | TXCFG_HBI),
+			       dev->base + TXCFG);
+			writel(readl(dev->base + RXCFG) & ~(RXCFG_RX_FD),
+			       dev->base + RXCFG);
+		}
+
+		if ((cfg & CFG_LNKSTS) &&
+		    ((new_cfg ^ dev->CFG_cache) != 0)) {
+			writel(new_cfg, dev->base + CFG);
+			dev->CFG_cache = new_cfg;
+		}
+
+		dev->CFG_cache &= ~CFG_SPDSTS;
+		dev->CFG_cache |= cfg & CFG_SPDSTS;
+	}
+
+	newlinkstate = (cfg & CFG_LNKSTS) ? LINK_UP : LINK_DOWN;
+
+	if (newlinkstate & LINK_UP &&
+	    dev->linkstate != newlinkstate) {
+		netif_start_queue(ndev);
+		netif_wake_queue(ndev);
+		printk(KERN_INFO "%s: link now %s mbps, %s duplex and up.\n",
+			ndev->name,
+			speeds[speed],
+			fullduplex ? "full" : "half");
+	} else if (newlinkstate & LINK_DOWN &&
+		   dev->linkstate != newlinkstate) {
+		netif_stop_queue(ndev);
+		printk(KERN_INFO "%s: link now down.\n", ndev->name);
+	}
+
+	dev->linkstate = newlinkstate;
+}
+
+static int ns83820_setup_rx(struct net_device *ndev)
+{
+	struct ns83820 *dev = PRIV(ndev);
+	unsigned i;
+	int ret;
+
+	dprintk("ns83820_setup_rx(%p)\n", ndev);
+
+	dev->rx_info.idle = 1;
+	dev->rx_info.next_rx = 0;
+	dev->rx_info.next_rx_desc = dev->rx_info.descs;
+	dev->rx_info.next_empty = 0;
+
+	for (i=0; i<NR_RX_DESC; i++)
+		clear_rx_desc(dev, i);
+
+	writel(0, dev->base + RXDP_HI);
+	writel(dev->rx_info.phy_descs, dev->base + RXDP);
+
+	ret = rx_refill(ndev, GFP_KERNEL);
+	if (!ret) {
+		dprintk("starting receiver\n");
+		/* prevent the interrupt handler from stomping on us */
+		spin_lock_irq(&dev->rx_info.lock);
+
+		writel(0x0001, dev->base + CCSR);
+		writel(0, dev->base + RFCR);
+		writel(0x7fc00000, dev->base + RFCR);
+		writel(0xffc00000, dev->base + RFCR);
+
+		dev->rx_info.up = 1;
+
+		phy_intr(ndev);
+
+		/* Okay, let it rip */
+		spin_lock(&dev->misc_lock);
+		dev->IMR_cache |= ISR_PHY;
+		dev->IMR_cache |= ISR_RXRCMP;
+		//dev->IMR_cache |= ISR_RXERR;
+		//dev->IMR_cache |= ISR_RXOK;
+		dev->IMR_cache |= ISR_RXORN;
+		dev->IMR_cache |= ISR_RXSOVR;
+		dev->IMR_cache |= ISR_RXDESC;
+		dev->IMR_cache |= ISR_RXIDLE;
+		dev->IMR_cache |= ISR_TXDESC;
+		dev->IMR_cache |= ISR_TXIDLE;
+
+		writel(dev->IMR_cache, dev->base + IMR);
+		writel(1, dev->base + IER);
+		spin_unlock(&dev->misc_lock);
+
+		kick_rx(ndev);
+
+		spin_unlock_irq(&dev->rx_info.lock);
+	}
+	return ret;
+}
+
+static void ns83820_cleanup_rx(struct ns83820 *dev)
+{
+	unsigned i;
+	unsigned long flags;
+
+	dprintk("ns83820_cleanup_rx(%p)\n", dev);
+
+	/* disable receive interrupts */
+	spin_lock_irqsave(&dev->misc_lock, flags);
+	dev->IMR_cache &= ~(ISR_RXOK | ISR_RXDESC | ISR_RXERR | ISR_RXEARLY | ISR_RXIDLE);
+	writel(dev->IMR_cache, dev->base + IMR);
+	spin_unlock_irqrestore(&dev->misc_lock, flags);
+
+	/* synchronize with the interrupt handler and kill it */
+	dev->rx_info.up = 0;
+	synchronize_irq(dev->pci_dev->irq);
+
+	/* touch the pci bus... */
+	readl(dev->base + IMR);
+
+	/* assumes the transmitter is already disabled and reset */
+	writel(0, dev->base + RXDP_HI);
+	writel(0, dev->base + RXDP);
+
+	for (i=0; i<NR_RX_DESC; i++) {
+		struct sk_buff *skb = dev->rx_info.skbs[i];
+		dev->rx_info.skbs[i] = NULL;
+		clear_rx_desc(dev, i);
+		kfree_skb(skb);
+	}
+}
+
+static void ns83820_rx_kick(struct net_device *ndev)
+{
+	struct ns83820 *dev = PRIV(ndev);
+	/*if (nr_rx_empty(dev) >= NR_RX_DESC/4)*/ {
+		if (dev->rx_info.up) {
+			rx_refill_atomic(ndev);
+			kick_rx(ndev);
+		}
+	}
+
+	if (dev->rx_info.up && nr_rx_empty(dev) > NR_RX_DESC*3/4)
+		schedule_work(&dev->tq_refill);
+	else
+		kick_rx(ndev);
+	if (dev->rx_info.idle)
+		printk(KERN_DEBUG "%s: BAD\n", ndev->name);
+}
+
+/* rx_irq
+ *
+ */
+static void rx_irq(struct net_device *ndev)
+{
+	struct ns83820 *dev = PRIV(ndev);
+	struct rx_info *info = &dev->rx_info;
+	unsigned next_rx;
+	int rx_rc, len;
+	u32 cmdsts;
+	__le32 *desc;
+	unsigned long flags;
+	int nr = 0;
+
+	dprintk("rx_irq(%p)\n", ndev);
+	dprintk("rxdp: %08x, descs: %08lx next_rx[%d]: %p next_empty[%d]: %p\n",
+		readl(dev->base + RXDP),
+		(long)(dev->rx_info.phy_descs),
+		(int)dev->rx_info.next_rx,
+		(dev->rx_info.descs + (DESC_SIZE * dev->rx_info.next_rx)),
+		(int)dev->rx_info.next_empty,
+		(dev->rx_info.descs + (DESC_SIZE * dev->rx_info.next_empty))
+		);
+
+	spin_lock_irqsave(&info->lock, flags);
+	if (!info->up)
+		goto out;
+
+	dprintk("walking descs\n");
+	next_rx = info->next_rx;
+	desc = info->next_rx_desc;
+	while ((CMDSTS_OWN & (cmdsts = le32_to_cpu(desc[DESC_CMDSTS]))) &&
+	       (cmdsts != CMDSTS_OWN)) {
+		struct sk_buff *skb;
+		u32 extsts = le32_to_cpu(desc[DESC_EXTSTS]);
+		dma_addr_t bufptr = desc_addr_get(desc + DESC_BUFPTR);
+
+		dprintk("cmdsts: %08x\n", cmdsts);
+		dprintk("link: %08x\n", cpu_to_le32(desc[DESC_LINK]));
+		dprintk("extsts: %08x\n", extsts);
+
+		skb = info->skbs[next_rx];
+		info->skbs[next_rx] = NULL;
+		info->next_rx = (next_rx + 1) % NR_RX_DESC;
+
+		mb();
+		clear_rx_desc(dev, next_rx);
+
+		pci_unmap_single(dev->pci_dev, bufptr,
+				 RX_BUF_SIZE, PCI_DMA_FROMDEVICE);
+		len = cmdsts & CMDSTS_LEN_MASK;
+#ifdef NS83820_VLAN_ACCEL_SUPPORT
+		/* NH: As was mentioned below, this chip is kinda
+		 * brain dead about vlan tag stripping.  Frames
+		 * that are 64 bytes with a vlan header appended
+		 * like arp frames, or pings, are flagged as Runts
+		 * when the tag is stripped and hardware.  This
+		 * also means that the OK bit in the descriptor
+		 * is cleared when the frame comes in so we have
+		 * to do a specific length check here to make sure
+		 * the frame would have been ok, had we not stripped
+		 * the tag.
+		 */
+		if (likely((CMDSTS_OK & cmdsts) ||
+			((cmdsts & CMDSTS_RUNT) && len >= 56))) {
+#else
+		if (likely(CMDSTS_OK & cmdsts)) {
+#endif
+			skb_put(skb, len);
+			if (unlikely(!skb))
+				goto netdev_mangle_me_harder_failed;
+			if (cmdsts & CMDSTS_DEST_MULTI)
+				ndev->stats.multicast++;
+			ndev->stats.rx_packets++;
+			ndev->stats.rx_bytes += len;
+			if ((extsts & 0x002a0000) && !(extsts & 0x00540000)) {
+				skb->ip_summed = CHECKSUM_UNNECESSARY;
+			} else {
+				skb_checksum_none_assert(skb);
+			}
+			skb->protocol = eth_type_trans(skb, ndev);
+#ifdef NS83820_VLAN_ACCEL_SUPPORT
+			if(extsts & EXTSTS_VPKT) {
+				unsigned short tag;
+
+				tag = ntohs(extsts & EXTSTS_VTG_MASK);
+				__vlan_hwaccel_put_tag(skb, htons(ETH_P_IPV6), tag);
+			}
+#endif
+			rx_rc = netif_rx(skb);
+			if (NET_RX_DROP == rx_rc) {
+netdev_mangle_me_harder_failed:
+				ndev->stats.rx_dropped++;
+			}
+		} else {
+			dev_kfree_skb_irq(skb);
+		}
+
+		nr++;
+		next_rx = info->next_rx;
+		desc = info->descs + (DESC_SIZE * next_rx);
+	}
+	info->next_rx = next_rx;
+	info->next_rx_desc = info->descs + (DESC_SIZE * next_rx);
+
+out:
+	if (0 && !nr) {
+		Dprintk("dazed: cmdsts_f: %08x\n", cmdsts);
+	}
+
+	spin_unlock_irqrestore(&info->lock, flags);
+}
+
+static void rx_action(unsigned long _dev)
+{
+	struct net_device *ndev = (void *)_dev;
+	struct ns83820 *dev = PRIV(ndev);
+	rx_irq(ndev);
+	writel(ihr, dev->base + IHR);
+
+	spin_lock_irq(&dev->misc_lock);
+	dev->IMR_cache |= ISR_RXDESC;
+	writel(dev->IMR_cache, dev->base + IMR);
+	spin_unlock_irq(&dev->misc_lock);
+
+	rx_irq(ndev);
+	ns83820_rx_kick(ndev);
+}
+
+/* Packet Transmit code
+ */
+static inline void kick_tx(struct ns83820 *dev)
+{
+	dprintk("kick_tx(%p): tx_idx=%d free_idx=%d\n",
+		dev, dev->tx_idx, dev->tx_free_idx);
+	writel(CR_TXE, dev->base + CR);
+}
+
+/* No spinlock needed on the transmit irq path as the interrupt handler is
+ * serialized.
+ */
+static void do_tx_done(struct net_device *ndev)
+{
+	struct ns83820 *dev = PRIV(ndev);
+	u32 cmdsts, tx_done_idx;
+	__le32 *desc;
+
+	dprintk("do_tx_done(%p)\n", ndev);
+	tx_done_idx = dev->tx_done_idx;
+	desc = dev->tx_descs + (tx_done_idx * DESC_SIZE);
+
+	dprintk("tx_done_idx=%d free_idx=%d cmdsts=%08x\n",
+		tx_done_idx, dev->tx_free_idx, le32_to_cpu(desc[DESC_CMDSTS]));
+	while ((tx_done_idx != dev->tx_free_idx) &&
+	       !(CMDSTS_OWN & (cmdsts = le32_to_cpu(desc[DESC_CMDSTS]))) ) {
+		struct sk_buff *skb;
+		unsigned len;
+		dma_addr_t addr;
+
+		if (cmdsts & CMDSTS_ERR)
+			ndev->stats.tx_errors++;
+		if (cmdsts & CMDSTS_OK)
+			ndev->stats.tx_packets++;
+		if (cmdsts & CMDSTS_OK)
+			ndev->stats.tx_bytes += cmdsts & 0xffff;
+
+		dprintk("tx_done_idx=%d free_idx=%d cmdsts=%08x\n",
+			tx_done_idx, dev->tx_free_idx, cmdsts);
+		skb = dev->tx_skbs[tx_done_idx];
+		dev->tx_skbs[tx_done_idx] = NULL;
+		dprintk("done(%p)\n", skb);
+
+		len = cmdsts & CMDSTS_LEN_MASK;
+		addr = desc_addr_get(desc + DESC_BUFPTR);
+		if (skb) {
+			pci_unmap_single(dev->pci_dev,
+					addr,
+					len,
+					PCI_DMA_TODEVICE);
+			dev_kfree_skb_irq(skb);
+			atomic_dec(&dev->nr_tx_skbs);
+		} else
+			pci_unmap_page(dev->pci_dev,
+					addr,
+					len,
+					PCI_DMA_TODEVICE);
+
+		tx_done_idx = (tx_done_idx + 1) % NR_TX_DESC;
+		dev->tx_done_idx = tx_done_idx;
+		desc[DESC_CMDSTS] = cpu_to_le32(0);
+		mb();
+		desc = dev->tx_descs + (tx_done_idx * DESC_SIZE);
+	}
+
+	/* Allow network stack to resume queueing packets after we've
+	 * finished transmitting at least 1/4 of the packets in the queue.
+	 */
+	if (netif_queue_stopped(ndev) && start_tx_okay(dev)) {
+		dprintk("start_queue(%p)\n", ndev);
+		netif_start_queue(ndev);
+		netif_wake_queue(ndev);
+	}
+}
+
+static void ns83820_cleanup_tx(struct ns83820 *dev)
+{
+	unsigned i;
+
+	for (i=0; i<NR_TX_DESC; i++) {
+		struct sk_buff *skb = dev->tx_skbs[i];
+		dev->tx_skbs[i] = NULL;
+		if (skb) {
+			__le32 *desc = dev->tx_descs + (i * DESC_SIZE);
+			pci_unmap_single(dev->pci_dev,
+					desc_addr_get(desc + DESC_BUFPTR),
+					le32_to_cpu(desc[DESC_CMDSTS]) & CMDSTS_LEN_MASK,
+					PCI_DMA_TODEVICE);
+			dev_kfree_skb_irq(skb);
+			atomic_dec(&dev->nr_tx_skbs);
+		}
+	}
+
+	memset(dev->tx_descs, 0, NR_TX_DESC * DESC_SIZE * 4);
+}
+
+/* transmit routine.  This code relies on the network layer serializing
+ * its calls in, but will run happily in parallel with the interrupt
+ * handler.  This code currently has provisions for fragmenting tx buffers
+ * while trying to track down a bug in either the zero copy code or
+ * the tx fifo (hence the MAX_FRAG_LEN).
+ */
+static netdev_tx_t ns83820_hard_start_xmit(struct sk_buff *skb,
+					   struct net_device *ndev)
+{
+	struct ns83820 *dev = PRIV(ndev);
+	u32 free_idx, cmdsts, extsts;
+	int nr_free, nr_frags;
+	unsigned tx_done_idx, last_idx;
+	dma_addr_t buf;
+	unsigned len;
+	skb_frag_t *frag;
+	int stopped = 0;
+	int do_intr = 0;
+	volatile __le32 *first_desc;
+
+	dprintk("ns83820_hard_start_xmit\n");
+
+	nr_frags =  skb_shinfo(skb)->nr_frags;
+again:
+	if (unlikely(dev->CFG_cache & CFG_LNKSTS)) {
+		netif_stop_queue(ndev);
+		if (unlikely(dev->CFG_cache & CFG_LNKSTS))
+			return NETDEV_TX_BUSY;
+		netif_start_queue(ndev);
+	}
+
+	last_idx = free_idx = dev->tx_free_idx;
+	tx_done_idx = dev->tx_done_idx;
+	nr_free = (tx_done_idx + NR_TX_DESC-2 - free_idx) % NR_TX_DESC;
+	nr_free -= 1;
+	if (nr_free <= nr_frags) {
+		dprintk("stop_queue - not enough(%p)\n", ndev);
+		netif_stop_queue(ndev);
+
+		/* Check again: we may have raced with a tx done irq */
+		if (dev->tx_done_idx != tx_done_idx) {
+			dprintk("restart queue(%p)\n", ndev);
+			netif_start_queue(ndev);
+			goto again;
+		}
+		return NETDEV_TX_BUSY;
+	}
+
+	if (free_idx == dev->tx_intr_idx) {
+		do_intr = 1;
+		dev->tx_intr_idx = (dev->tx_intr_idx + NR_TX_DESC/4) % NR_TX_DESC;
+	}
+
+	nr_free -= nr_frags;
+	if (nr_free < MIN_TX_DESC_FREE) {
+		dprintk("stop_queue - last entry(%p)\n", ndev);
+		netif_stop_queue(ndev);
+		stopped = 1;
+	}
+
+	frag = skb_shinfo(skb)->frags;
+	if (!nr_frags)
+		frag = NULL;
+	extsts = 0;
+	if (skb->ip_summed == CHECKSUM_PARTIAL) {
+		extsts |= EXTSTS_IPPKT;
+		if (IPPROTO_TCP == ip_hdr(skb)->protocol)
+			extsts |= EXTSTS_TCPPKT;
+		else if (IPPROTO_UDP == ip_hdr(skb)->protocol)
+			extsts |= EXTSTS_UDPPKT;
+	}
+
+#ifdef NS83820_VLAN_ACCEL_SUPPORT
+	if (skb_vlan_tag_present(skb)) {
+		/* fetch the vlan tag info out of the
+		 * ancillary data if the vlan code
+		 * is using hw vlan acceleration
+		 */
+		short tag = skb_vlan_tag_get(skb);
+		extsts |= (EXTSTS_VPKT | htons(tag));
+	}
+#endif
+
+	len = skb->len;
+	if (nr_frags)
+		len -= skb->data_len;
+	buf = pci_map_single(dev->pci_dev, skb->data, len, PCI_DMA_TODEVICE);
+
+	first_desc = dev->tx_descs + (free_idx * DESC_SIZE);
+
+	for (;;) {
+		volatile __le32 *desc = dev->tx_descs + (free_idx * DESC_SIZE);
+
+		dprintk("frag[%3u]: %4u @ 0x%08Lx\n", free_idx, len,
+			(unsigned long long)buf);
+		last_idx = free_idx;
+		free_idx = (free_idx + 1) % NR_TX_DESC;
+		desc[DESC_LINK] = cpu_to_le32(dev->tx_phy_descs + (free_idx * DESC_SIZE * 4));
+		desc_addr_set(desc + DESC_BUFPTR, buf);
+		desc[DESC_EXTSTS] = cpu_to_le32(extsts);
+
+		cmdsts = ((nr_frags) ? CMDSTS_MORE : do_intr ? CMDSTS_INTR : 0);
+		cmdsts |= (desc == first_desc) ? 0 : CMDSTS_OWN;
+		cmdsts |= len;
+		desc[DESC_CMDSTS] = cpu_to_le32(cmdsts);
+
+		if (!nr_frags)
+			break;
+
+		buf = skb_frag_dma_map(&dev->pci_dev->dev, frag, 0,
+				       skb_frag_size(frag), DMA_TO_DEVICE);
+		dprintk("frag: buf=%08Lx  page=%08lx offset=%08lx\n",
+			(long long)buf, (long) page_to_pfn(frag->page),
+			frag->page_offset);
+		len = skb_frag_size(frag);
+		frag++;
+		nr_frags--;
+	}
+	dprintk("done pkt\n");
+
+	spin_lock_irq(&dev->tx_lock);
+	dev->tx_skbs[last_idx] = skb;
+	first_desc[DESC_CMDSTS] |= cpu_to_le32(CMDSTS_OWN);
+	dev->tx_free_idx = free_idx;
+	atomic_inc(&dev->nr_tx_skbs);
+	spin_unlock_irq(&dev->tx_lock);
+
+	kick_tx(dev);
+
+	/* Check again: we may have raced with a tx done irq */
+	if (stopped && (dev->tx_done_idx != tx_done_idx) && start_tx_okay(dev))
+		netif_start_queue(ndev);
+
+	return NETDEV_TX_OK;
+}
+
+static void ns83820_update_stats(struct ns83820 *dev)
+{
+	struct net_device *ndev = dev->ndev;
+	u8 __iomem *base = dev->base;
+
+	/* the DP83820 will freeze counters, so we need to read all of them */
+	ndev->stats.rx_errors		+= readl(base + 0x60) & 0xffff;
+	ndev->stats.rx_crc_errors	+= readl(base + 0x64) & 0xffff;
+	ndev->stats.rx_missed_errors	+= readl(base + 0x68) & 0xffff;
+	ndev->stats.rx_frame_errors	+= readl(base + 0x6c) & 0xffff;
+	/*ndev->stats.rx_symbol_errors +=*/ readl(base + 0x70);
+	ndev->stats.rx_length_errors	+= readl(base + 0x74) & 0xffff;
+	ndev->stats.rx_length_errors	+= readl(base + 0x78) & 0xffff;
+	/*ndev->stats.rx_badopcode_errors += */ readl(base + 0x7c);
+	/*ndev->stats.rx_pause_count += */  readl(base + 0x80);
+	/*ndev->stats.tx_pause_count += */  readl(base + 0x84);
+	ndev->stats.tx_carrier_errors	+= readl(base + 0x88) & 0xff;
+}
+
+static struct net_device_stats *ns83820_get_stats(struct net_device *ndev)
+{
+	struct ns83820 *dev = PRIV(ndev);
+
+	/* somewhat overkill */
+	spin_lock_irq(&dev->misc_lock);
+	ns83820_update_stats(dev);
+	spin_unlock_irq(&dev->misc_lock);
+
+	return &ndev->stats;
+}
+
+/* Let ethtool retrieve info */
+static int ns83820_get_link_ksettings(struct net_device *ndev,
+				      struct ethtool_link_ksettings *cmd)
+{
+	struct ns83820 *dev = PRIV(ndev);
+	u32 cfg, tanar, tbicr;
+	int fullduplex   = 0;
+	u32 supported;
+
+	/*
+	 * Here's the list of available ethtool commands from other drivers:
+	 *	cmd->advertising =
+	 *	ethtool_cmd_speed_set(cmd, ...)
+	 *	cmd->duplex =
+	 *	cmd->port = 0;
+	 *	cmd->phy_address =
+	 *	cmd->transceiver = 0;
+	 *	cmd->autoneg =
+	 *	cmd->maxtxpkt = 0;
+	 *	cmd->maxrxpkt = 0;
+	 */
+
+	/* read current configuration */
+	cfg   = readl(dev->base + CFG) ^ SPDSTS_POLARITY;
+	tanar = readl(dev->base + TANAR);
+	tbicr = readl(dev->base + TBICR);
+
+	fullduplex = (cfg & CFG_DUPSTS) ? 1 : 0;
+
+	supported = SUPPORTED_Autoneg;
+
+	if (dev->CFG_cache & CFG_TBI_EN) {
+		/* we have optical interface */
+		supported |= SUPPORTED_1000baseT_Half |
+					SUPPORTED_1000baseT_Full |
+					SUPPORTED_FIBRE;
+		cmd->base.port       = PORT_FIBRE;
+	} else {
+		/* we have copper */
+		supported |= SUPPORTED_10baseT_Half |
+			SUPPORTED_10baseT_Full | SUPPORTED_100baseT_Half |
+			SUPPORTED_100baseT_Full | SUPPORTED_1000baseT_Half |
+			SUPPORTED_1000baseT_Full |
+			SUPPORTED_MII;
+		cmd->base.port = PORT_MII;
+	}
+
+	ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
+						supported);
+
+	cmd->base.duplex = fullduplex ? DUPLEX_FULL : DUPLEX_HALF;
+	switch (cfg / CFG_SPDSTS0 & 3) {
+	case 2:
+		cmd->base.speed = SPEED_1000;
+		break;
+	case 1:
+		cmd->base.speed = SPEED_100;
+		break;
+	default:
+		cmd->base.speed = SPEED_10;
+		break;
+	}
+	cmd->base.autoneg = (tbicr & TBICR_MR_AN_ENABLE)
+		? AUTONEG_ENABLE : AUTONEG_DISABLE;
+	return 0;
+}
+
+/* Let ethool change settings*/
+static int ns83820_set_link_ksettings(struct net_device *ndev,
+				      const struct ethtool_link_ksettings *cmd)
+{
+	struct ns83820 *dev = PRIV(ndev);
+	u32 cfg, tanar;
+	int have_optical = 0;
+	int fullduplex   = 0;
+
+	/* read current configuration */
+	cfg = readl(dev->base + CFG) ^ SPDSTS_POLARITY;
+	tanar = readl(dev->base + TANAR);
+
+	if (dev->CFG_cache & CFG_TBI_EN) {
+		/* we have optical */
+		have_optical = 1;
+		fullduplex   = (tanar & TANAR_FULL_DUP);
+
+	} else {
+		/* we have copper */
+		fullduplex = cfg & CFG_DUPSTS;
+	}
+
+	spin_lock_irq(&dev->misc_lock);
+	spin_lock(&dev->tx_lock);
+
+	/* Set duplex */
+	if (cmd->base.duplex != fullduplex) {
+		if (have_optical) {
+			/*set full duplex*/
+			if (cmd->base.duplex == DUPLEX_FULL) {
+				/* force full duplex */
+				writel(readl(dev->base + TXCFG)
+					| TXCFG_CSI | TXCFG_HBI | TXCFG_ATP,
+					dev->base + TXCFG);
+				writel(readl(dev->base + RXCFG) | RXCFG_RX_FD,
+					dev->base + RXCFG);
+				/* Light up full duplex LED */
+				writel(readl(dev->base + GPIOR) | GPIOR_GP1_OUT,
+					dev->base + GPIOR);
+			} else {
+				/*TODO: set half duplex */
+			}
+
+		} else {
+			/*we have copper*/
+			/* TODO: Set duplex for copper cards */
+		}
+		printk(KERN_INFO "%s: Duplex set via ethtool\n",
+		ndev->name);
+	}
+
+	/* Set autonegotiation */
+	if (1) {
+		if (cmd->base.autoneg == AUTONEG_ENABLE) {
+			/* restart auto negotiation */
+			writel(TBICR_MR_AN_ENABLE | TBICR_MR_RESTART_AN,
+				dev->base + TBICR);
+			writel(TBICR_MR_AN_ENABLE, dev->base + TBICR);
+				dev->linkstate = LINK_AUTONEGOTIATE;
+
+			printk(KERN_INFO "%s: autoneg enabled via ethtool\n",
+				ndev->name);
+		} else {
+			/* disable auto negotiation */
+			writel(0x00000000, dev->base + TBICR);
+		}
+
+		printk(KERN_INFO "%s: autoneg %s via ethtool\n", ndev->name,
+				cmd->base.autoneg ? "ENABLED" : "DISABLED");
+	}
+
+	phy_intr(ndev);
+	spin_unlock(&dev->tx_lock);
+	spin_unlock_irq(&dev->misc_lock);
+
+	return 0;
+}
+/* end ethtool get/set support -df */
+
+static void ns83820_get_drvinfo(struct net_device *ndev, struct ethtool_drvinfo *info)
+{
+	struct ns83820 *dev = PRIV(ndev);
+	strlcpy(info->driver, "ns83820", sizeof(info->driver));
+	strlcpy(info->version, VERSION, sizeof(info->version));
+	strlcpy(info->bus_info, pci_name(dev->pci_dev), sizeof(info->bus_info));
+}
+
+static u32 ns83820_get_link(struct net_device *ndev)
+{
+	struct ns83820 *dev = PRIV(ndev);
+	u32 cfg = readl(dev->base + CFG) ^ SPDSTS_POLARITY;
+	return cfg & CFG_LNKSTS ? 1 : 0;
+}
+
+static const struct ethtool_ops ops = {
+	.get_drvinfo     = ns83820_get_drvinfo,
+	.get_link        = ns83820_get_link,
+	.get_link_ksettings = ns83820_get_link_ksettings,
+	.set_link_ksettings = ns83820_set_link_ksettings,
+};
+
+static inline void ns83820_disable_interrupts(struct ns83820 *dev)
+{
+	writel(0, dev->base + IMR);
+	writel(0, dev->base + IER);
+	readl(dev->base + IER);
+}
+
+/* this function is called in irq context from the ISR */
+static void ns83820_mib_isr(struct ns83820 *dev)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&dev->misc_lock, flags);
+	ns83820_update_stats(dev);
+	spin_unlock_irqrestore(&dev->misc_lock, flags);
+}
+
+static void ns83820_do_isr(struct net_device *ndev, u32 isr);
+static irqreturn_t ns83820_irq(int foo, void *data)
+{
+	struct net_device *ndev = data;
+	struct ns83820 *dev = PRIV(ndev);
+	u32 isr;
+	dprintk("ns83820_irq(%p)\n", ndev);
+
+	dev->ihr = 0;
+
+	isr = readl(dev->base + ISR);
+	dprintk("irq: %08x\n", isr);
+	ns83820_do_isr(ndev, isr);
+	return IRQ_HANDLED;
+}
+
+static void ns83820_do_isr(struct net_device *ndev, u32 isr)
+{
+	struct ns83820 *dev = PRIV(ndev);
+	unsigned long flags;
+
+#ifdef DEBUG
+	if (isr & ~(ISR_PHY | ISR_RXDESC | ISR_RXEARLY | ISR_RXOK | ISR_RXERR | ISR_TXIDLE | ISR_TXOK | ISR_TXDESC))
+		Dprintk("odd isr? 0x%08x\n", isr);
+#endif
+
+	if (ISR_RXIDLE & isr) {
+		dev->rx_info.idle = 1;
+		Dprintk("oh dear, we are idle\n");
+		ns83820_rx_kick(ndev);
+	}
+
+	if ((ISR_RXDESC | ISR_RXOK) & isr) {
+		prefetch(dev->rx_info.next_rx_desc);
+
+		spin_lock_irqsave(&dev->misc_lock, flags);
+		dev->IMR_cache &= ~(ISR_RXDESC | ISR_RXOK);
+		writel(dev->IMR_cache, dev->base + IMR);
+		spin_unlock_irqrestore(&dev->misc_lock, flags);
+
+		tasklet_schedule(&dev->rx_tasklet);
+		//rx_irq(ndev);
+		//writel(4, dev->base + IHR);
+	}
+
+	if ((ISR_RXIDLE | ISR_RXORN | ISR_RXDESC | ISR_RXOK | ISR_RXERR) & isr)
+		ns83820_rx_kick(ndev);
+
+	if (unlikely(ISR_RXSOVR & isr)) {
+		//printk("overrun: rxsovr\n");
+		ndev->stats.rx_fifo_errors++;
+	}
+
+	if (unlikely(ISR_RXORN & isr)) {
+		//printk("overrun: rxorn\n");
+		ndev->stats.rx_fifo_errors++;
+	}
+
+	if ((ISR_RXRCMP & isr) && dev->rx_info.up)
+		writel(CR_RXE, dev->base + CR);
+
+	if (ISR_TXIDLE & isr) {
+		u32 txdp;
+		txdp = readl(dev->base + TXDP);
+		dprintk("txdp: %08x\n", txdp);
+		txdp -= dev->tx_phy_descs;
+		dev->tx_idx = txdp / (DESC_SIZE * 4);
+		if (dev->tx_idx >= NR_TX_DESC) {
+			printk(KERN_ALERT "%s: BUG -- txdp out of range\n", ndev->name);
+			dev->tx_idx = 0;
+		}
+		/* The may have been a race between a pci originated read
+		 * and the descriptor update from the cpu.  Just in case,
+		 * kick the transmitter if the hardware thinks it is on a
+		 * different descriptor than we are.
+		 */
+		if (dev->tx_idx != dev->tx_free_idx)
+			kick_tx(dev);
+	}
+
+	/* Defer tx ring processing until more than a minimum amount of
+	 * work has accumulated
+	 */
+	if ((ISR_TXDESC | ISR_TXIDLE | ISR_TXOK | ISR_TXERR) & isr) {
+		spin_lock_irqsave(&dev->tx_lock, flags);
+		do_tx_done(ndev);
+		spin_unlock_irqrestore(&dev->tx_lock, flags);
+
+		/* Disable TxOk if there are no outstanding tx packets.
+		 */
+		if ((dev->tx_done_idx == dev->tx_free_idx) &&
+		    (dev->IMR_cache & ISR_TXOK)) {
+			spin_lock_irqsave(&dev->misc_lock, flags);
+			dev->IMR_cache &= ~ISR_TXOK;
+			writel(dev->IMR_cache, dev->base + IMR);
+			spin_unlock_irqrestore(&dev->misc_lock, flags);
+		}
+	}
+
+	/* The TxIdle interrupt can come in before the transmit has
+	 * completed.  Normally we reap packets off of the combination
+	 * of TxDesc and TxIdle and leave TxOk disabled (since it
+	 * occurs on every packet), but when no further irqs of this
+	 * nature are expected, we must enable TxOk.
+	 */
+	if ((ISR_TXIDLE & isr) && (dev->tx_done_idx != dev->tx_free_idx)) {
+		spin_lock_irqsave(&dev->misc_lock, flags);
+		dev->IMR_cache |= ISR_TXOK;
+		writel(dev->IMR_cache, dev->base + IMR);
+		spin_unlock_irqrestore(&dev->misc_lock, flags);
+	}
+
+	/* MIB interrupt: one of the statistics counters is about to overflow */
+	if (unlikely(ISR_MIB & isr))
+		ns83820_mib_isr(dev);
+
+	/* PHY: Link up/down/negotiation state change */
+	if (unlikely(ISR_PHY & isr))
+		phy_intr(ndev);
+
+#if 0	/* Still working on the interrupt mitigation strategy */
+	if (dev->ihr)
+		writel(dev->ihr, dev->base + IHR);
+#endif
+}
+
+static void ns83820_do_reset(struct ns83820 *dev, u32 which)
+{
+	Dprintk("resetting chip...\n");
+	writel(which, dev->base + CR);
+	do {
+		schedule();
+	} while (readl(dev->base + CR) & which);
+	Dprintk("okay!\n");
+}
+
+static int ns83820_stop(struct net_device *ndev)
+{
+	struct ns83820 *dev = PRIV(ndev);
+
+	/* FIXME: protect against interrupt handler? */
+	del_timer_sync(&dev->tx_watchdog);
+
+	ns83820_disable_interrupts(dev);
+
+	dev->rx_info.up = 0;
+	synchronize_irq(dev->pci_dev->irq);
+
+	ns83820_do_reset(dev, CR_RST);
+
+	synchronize_irq(dev->pci_dev->irq);
+
+	spin_lock_irq(&dev->misc_lock);
+	dev->IMR_cache &= ~(ISR_TXURN | ISR_TXIDLE | ISR_TXERR | ISR_TXDESC | ISR_TXOK);
+	spin_unlock_irq(&dev->misc_lock);
+
+	ns83820_cleanup_rx(dev);
+	ns83820_cleanup_tx(dev);
+
+	return 0;
+}
+
+static void ns83820_tx_timeout(struct net_device *ndev)
+{
+	struct ns83820 *dev = PRIV(ndev);
+        u32 tx_done_idx;
+	__le32 *desc;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->tx_lock, flags);
+
+	tx_done_idx = dev->tx_done_idx;
+	desc = dev->tx_descs + (tx_done_idx * DESC_SIZE);
+
+	printk(KERN_INFO "%s: tx_timeout: tx_done_idx=%d free_idx=%d cmdsts=%08x\n",
+		ndev->name,
+		tx_done_idx, dev->tx_free_idx, le32_to_cpu(desc[DESC_CMDSTS]));
+
+#if defined(DEBUG)
+	{
+		u32 isr;
+		isr = readl(dev->base + ISR);
+		printk("irq: %08x imr: %08x\n", isr, dev->IMR_cache);
+		ns83820_do_isr(ndev, isr);
+	}
+#endif
+
+	do_tx_done(ndev);
+
+	tx_done_idx = dev->tx_done_idx;
+	desc = dev->tx_descs + (tx_done_idx * DESC_SIZE);
+
+	printk(KERN_INFO "%s: after: tx_done_idx=%d free_idx=%d cmdsts=%08x\n",
+		ndev->name,
+		tx_done_idx, dev->tx_free_idx, le32_to_cpu(desc[DESC_CMDSTS]));
+
+	spin_unlock_irqrestore(&dev->tx_lock, flags);
+}
+
+static void ns83820_tx_watch(struct timer_list *t)
+{
+	struct ns83820 *dev = from_timer(dev, t, tx_watchdog);
+	struct net_device *ndev = dev->ndev;
+
+#if defined(DEBUG)
+	printk("ns83820_tx_watch: %u %u %d\n",
+		dev->tx_done_idx, dev->tx_free_idx, atomic_read(&dev->nr_tx_skbs)
+		);
+#endif
+
+	if (time_after(jiffies, dev_trans_start(ndev) + 1*HZ) &&
+	    dev->tx_done_idx != dev->tx_free_idx) {
+		printk(KERN_DEBUG "%s: ns83820_tx_watch: %u %u %d\n",
+			ndev->name,
+			dev->tx_done_idx, dev->tx_free_idx,
+			atomic_read(&dev->nr_tx_skbs));
+		ns83820_tx_timeout(ndev);
+	}
+
+	mod_timer(&dev->tx_watchdog, jiffies + 2*HZ);
+}
+
+static int ns83820_open(struct net_device *ndev)
+{
+	struct ns83820 *dev = PRIV(ndev);
+	unsigned i;
+	u32 desc;
+	int ret;
+
+	dprintk("ns83820_open\n");
+
+	writel(0, dev->base + PQCR);
+
+	ret = ns83820_setup_rx(ndev);
+	if (ret)
+		goto failed;
+
+	memset(dev->tx_descs, 0, 4 * NR_TX_DESC * DESC_SIZE);
+	for (i=0; i<NR_TX_DESC; i++) {
+		dev->tx_descs[(i * DESC_SIZE) + DESC_LINK]
+				= cpu_to_le32(
+				  dev->tx_phy_descs
+				  + ((i+1) % NR_TX_DESC) * DESC_SIZE * 4);
+	}
+
+	dev->tx_idx = 0;
+	dev->tx_done_idx = 0;
+	desc = dev->tx_phy_descs;
+	writel(0, dev->base + TXDP_HI);
+	writel(desc, dev->base + TXDP);
+
+	timer_setup(&dev->tx_watchdog, ns83820_tx_watch, 0);
+	mod_timer(&dev->tx_watchdog, jiffies + 2*HZ);
+
+	netif_start_queue(ndev);	/* FIXME: wait for phy to come up */
+
+	return 0;
+
+failed:
+	ns83820_stop(ndev);
+	return ret;
+}
+
+static void ns83820_getmac(struct ns83820 *dev, u8 *mac)
+{
+	unsigned i;
+	for (i=0; i<3; i++) {
+		u32 data;
+
+		/* Read from the perfect match memory: this is loaded by
+		 * the chip from the EEPROM via the EELOAD self test.
+		 */
+		writel(i*2, dev->base + RFCR);
+		data = readl(dev->base + RFDR);
+
+		*mac++ = data;
+		*mac++ = data >> 8;
+	}
+}
+
+static void ns83820_set_multicast(struct net_device *ndev)
+{
+	struct ns83820 *dev = PRIV(ndev);
+	u8 __iomem *rfcr = dev->base + RFCR;
+	u32 and_mask = 0xffffffff;
+	u32 or_mask = 0;
+	u32 val;
+
+	if (ndev->flags & IFF_PROMISC)
+		or_mask |= RFCR_AAU | RFCR_AAM;
+	else
+		and_mask &= ~(RFCR_AAU | RFCR_AAM);
+
+	if (ndev->flags & IFF_ALLMULTI || netdev_mc_count(ndev))
+		or_mask |= RFCR_AAM;
+	else
+		and_mask &= ~RFCR_AAM;
+
+	spin_lock_irq(&dev->misc_lock);
+	val = (readl(rfcr) & and_mask) | or_mask;
+	/* Ramit : RFCR Write Fix doc says RFEN must be 0 modify other bits */
+	writel(val & ~RFCR_RFEN, rfcr);
+	writel(val, rfcr);
+	spin_unlock_irq(&dev->misc_lock);
+}
+
+static void ns83820_run_bist(struct net_device *ndev, const char *name, u32 enable, u32 done, u32 fail)
+{
+	struct ns83820 *dev = PRIV(ndev);
+	int timed_out = 0;
+	unsigned long start;
+	u32 status;
+	int loops = 0;
+
+	dprintk("%s: start %s\n", ndev->name, name);
+
+	start = jiffies;
+
+	writel(enable, dev->base + PTSCR);
+	for (;;) {
+		loops++;
+		status = readl(dev->base + PTSCR);
+		if (!(status & enable))
+			break;
+		if (status & done)
+			break;
+		if (status & fail)
+			break;
+		if (time_after_eq(jiffies, start + HZ)) {
+			timed_out = 1;
+			break;
+		}
+		schedule_timeout_uninterruptible(1);
+	}
+
+	if (status & fail)
+		printk(KERN_INFO "%s: %s failed! (0x%08x & 0x%08x)\n",
+			ndev->name, name, status, fail);
+	else if (timed_out)
+		printk(KERN_INFO "%s: run_bist %s timed out! (%08x)\n",
+			ndev->name, name, status);
+
+	dprintk("%s: done %s in %d loops\n", ndev->name, name, loops);
+}
+
+#ifdef PHY_CODE_IS_FINISHED
+static void ns83820_mii_write_bit(struct ns83820 *dev, int bit)
+{
+	/* drive MDC low */
+	dev->MEAR_cache &= ~MEAR_MDC;
+	writel(dev->MEAR_cache, dev->base + MEAR);
+	readl(dev->base + MEAR);
+
+	/* enable output, set bit */
+	dev->MEAR_cache |= MEAR_MDDIR;
+	if (bit)
+		dev->MEAR_cache |= MEAR_MDIO;
+	else
+		dev->MEAR_cache &= ~MEAR_MDIO;
+
+	/* set the output bit */
+	writel(dev->MEAR_cache, dev->base + MEAR);
+	readl(dev->base + MEAR);
+
+	/* Wait.  Max clock rate is 2.5MHz, this way we come in under 1MHz */
+	udelay(1);
+
+	/* drive MDC high causing the data bit to be latched */
+	dev->MEAR_cache |= MEAR_MDC;
+	writel(dev->MEAR_cache, dev->base + MEAR);
+	readl(dev->base + MEAR);
+
+	/* Wait again... */
+	udelay(1);
+}
+
+static int ns83820_mii_read_bit(struct ns83820 *dev)
+{
+	int bit;
+
+	/* drive MDC low, disable output */
+	dev->MEAR_cache &= ~MEAR_MDC;
+	dev->MEAR_cache &= ~MEAR_MDDIR;
+	writel(dev->MEAR_cache, dev->base + MEAR);
+	readl(dev->base + MEAR);
+
+	/* Wait.  Max clock rate is 2.5MHz, this way we come in under 1MHz */
+	udelay(1);
+
+	/* drive MDC high causing the data bit to be latched */
+	bit = (readl(dev->base + MEAR) & MEAR_MDIO) ? 1 : 0;
+	dev->MEAR_cache |= MEAR_MDC;
+	writel(dev->MEAR_cache, dev->base + MEAR);
+
+	/* Wait again... */
+	udelay(1);
+
+	return bit;
+}
+
+static unsigned ns83820_mii_read_reg(struct ns83820 *dev, unsigned phy, unsigned reg)
+{
+	unsigned data = 0;
+	int i;
+
+	/* read some garbage so that we eventually sync up */
+	for (i=0; i<64; i++)
+		ns83820_mii_read_bit(dev);
+
+	ns83820_mii_write_bit(dev, 0);	/* start */
+	ns83820_mii_write_bit(dev, 1);
+	ns83820_mii_write_bit(dev, 1);	/* opcode read */
+	ns83820_mii_write_bit(dev, 0);
+
+	/* write out the phy address: 5 bits, msb first */
+	for (i=0; i<5; i++)
+		ns83820_mii_write_bit(dev, phy & (0x10 >> i));
+
+	/* write out the register address, 5 bits, msb first */
+	for (i=0; i<5; i++)
+		ns83820_mii_write_bit(dev, reg & (0x10 >> i));
+
+	ns83820_mii_read_bit(dev);	/* turn around cycles */
+	ns83820_mii_read_bit(dev);
+
+	/* read in the register data, 16 bits msb first */
+	for (i=0; i<16; i++) {
+		data <<= 1;
+		data |= ns83820_mii_read_bit(dev);
+	}
+
+	return data;
+}
+
+static unsigned ns83820_mii_write_reg(struct ns83820 *dev, unsigned phy, unsigned reg, unsigned data)
+{
+	int i;
+
+	/* read some garbage so that we eventually sync up */
+	for (i=0; i<64; i++)
+		ns83820_mii_read_bit(dev);
+
+	ns83820_mii_write_bit(dev, 0);	/* start */
+	ns83820_mii_write_bit(dev, 1);
+	ns83820_mii_write_bit(dev, 0);	/* opcode read */
+	ns83820_mii_write_bit(dev, 1);
+
+	/* write out the phy address: 5 bits, msb first */
+	for (i=0; i<5; i++)
+		ns83820_mii_write_bit(dev, phy & (0x10 >> i));
+
+	/* write out the register address, 5 bits, msb first */
+	for (i=0; i<5; i++)
+		ns83820_mii_write_bit(dev, reg & (0x10 >> i));
+
+	ns83820_mii_read_bit(dev);	/* turn around cycles */
+	ns83820_mii_read_bit(dev);
+
+	/* read in the register data, 16 bits msb first */
+	for (i=0; i<16; i++)
+		ns83820_mii_write_bit(dev, (data >> (15 - i)) & 1);
+
+	return data;
+}
+
+static void ns83820_probe_phy(struct net_device *ndev)
+{
+	struct ns83820 *dev = PRIV(ndev);
+	static int first;
+	int i;
+#define MII_PHYIDR1	0x02
+#define MII_PHYIDR2	0x03
+
+#if 0
+	if (!first) {
+		unsigned tmp;
+		ns83820_mii_read_reg(dev, 1, 0x09);
+		ns83820_mii_write_reg(dev, 1, 0x10, 0x0d3e);
+
+		tmp = ns83820_mii_read_reg(dev, 1, 0x00);
+		ns83820_mii_write_reg(dev, 1, 0x00, tmp | 0x8000);
+		udelay(1300);
+		ns83820_mii_read_reg(dev, 1, 0x09);
+	}
+#endif
+	first = 1;
+
+	for (i=1; i<2; i++) {
+		int j;
+		unsigned a, b;
+		a = ns83820_mii_read_reg(dev, i, MII_PHYIDR1);
+		b = ns83820_mii_read_reg(dev, i, MII_PHYIDR2);
+
+		//printk("%s: phy %d: 0x%04x 0x%04x\n",
+		//	ndev->name, i, a, b);
+
+		for (j=0; j<0x16; j+=4) {
+			dprintk("%s: [0x%02x] %04x %04x %04x %04x\n",
+				ndev->name, j,
+				ns83820_mii_read_reg(dev, i, 0 + j),
+				ns83820_mii_read_reg(dev, i, 1 + j),
+				ns83820_mii_read_reg(dev, i, 2 + j),
+				ns83820_mii_read_reg(dev, i, 3 + j)
+				);
+		}
+	}
+	{
+		unsigned a, b;
+		/* read firmware version: memory addr is 0x8402 and 0x8403 */
+		ns83820_mii_write_reg(dev, 1, 0x16, 0x000d);
+		ns83820_mii_write_reg(dev, 1, 0x1e, 0x810e);
+		a = ns83820_mii_read_reg(dev, 1, 0x1d);
+
+		ns83820_mii_write_reg(dev, 1, 0x16, 0x000d);
+		ns83820_mii_write_reg(dev, 1, 0x1e, 0x810e);
+		b = ns83820_mii_read_reg(dev, 1, 0x1d);
+		dprintk("version: 0x%04x 0x%04x\n", a, b);
+	}
+}
+#endif
+
+static const struct net_device_ops netdev_ops = {
+	.ndo_open		= ns83820_open,
+	.ndo_stop		= ns83820_stop,
+	.ndo_start_xmit		= ns83820_hard_start_xmit,
+	.ndo_get_stats		= ns83820_get_stats,
+	.ndo_set_rx_mode	= ns83820_set_multicast,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+	.ndo_tx_timeout		= ns83820_tx_timeout,
+};
+
+static int ns83820_init_one(struct pci_dev *pci_dev,
+			    const struct pci_device_id *id)
+{
+	struct net_device *ndev;
+	struct ns83820 *dev;
+	long addr;
+	int err;
+	int using_dac = 0;
+
+	/* See if we can set the dma mask early on; failure is fatal. */
+	if (sizeof(dma_addr_t) == 8 &&
+		!pci_set_dma_mask(pci_dev, DMA_BIT_MASK(64))) {
+		using_dac = 1;
+	} else if (!pci_set_dma_mask(pci_dev, DMA_BIT_MASK(32))) {
+		using_dac = 0;
+	} else {
+		dev_warn(&pci_dev->dev, "pci_set_dma_mask failed!\n");
+		return -ENODEV;
+	}
+
+	ndev = alloc_etherdev(sizeof(struct ns83820));
+	err = -ENOMEM;
+	if (!ndev)
+		goto out;
+
+	dev = PRIV(ndev);
+	dev->ndev = ndev;
+
+	spin_lock_init(&dev->rx_info.lock);
+	spin_lock_init(&dev->tx_lock);
+	spin_lock_init(&dev->misc_lock);
+	dev->pci_dev = pci_dev;
+
+	SET_NETDEV_DEV(ndev, &pci_dev->dev);
+
+	INIT_WORK(&dev->tq_refill, queue_refill);
+	tasklet_init(&dev->rx_tasklet, rx_action, (unsigned long)ndev);
+
+	err = pci_enable_device(pci_dev);
+	if (err) {
+		dev_info(&pci_dev->dev, "pci_enable_dev failed: %d\n", err);
+		goto out_free;
+	}
+
+	pci_set_master(pci_dev);
+	addr = pci_resource_start(pci_dev, 1);
+	dev->base = ioremap_nocache(addr, PAGE_SIZE);
+	dev->tx_descs = pci_alloc_consistent(pci_dev,
+			4 * DESC_SIZE * NR_TX_DESC, &dev->tx_phy_descs);
+	dev->rx_info.descs = pci_alloc_consistent(pci_dev,
+			4 * DESC_SIZE * NR_RX_DESC, &dev->rx_info.phy_descs);
+	err = -ENOMEM;
+	if (!dev->base || !dev->tx_descs || !dev->rx_info.descs)
+		goto out_disable;
+
+	dprintk("%p: %08lx  %p: %08lx\n",
+		dev->tx_descs, (long)dev->tx_phy_descs,
+		dev->rx_info.descs, (long)dev->rx_info.phy_descs);
+
+	ns83820_disable_interrupts(dev);
+
+	dev->IMR_cache = 0;
+
+	err = request_irq(pci_dev->irq, ns83820_irq, IRQF_SHARED,
+			  DRV_NAME, ndev);
+	if (err) {
+		dev_info(&pci_dev->dev, "unable to register irq %d, err %d\n",
+			pci_dev->irq, err);
+		goto out_disable;
+	}
+
+	/*
+	 * FIXME: we are holding rtnl_lock() over obscenely long area only
+	 * because some of the setup code uses dev->name.  It's Wrong(tm) -
+	 * we should be using driver-specific names for all that stuff.
+	 * For now that will do, but we really need to come back and kill
+	 * most of the dev_alloc_name() users later.
+	 */
+	rtnl_lock();
+	err = dev_alloc_name(ndev, ndev->name);
+	if (err < 0) {
+		dev_info(&pci_dev->dev, "unable to get netdev name: %d\n", err);
+		goto out_free_irq;
+	}
+
+	printk("%s: ns83820.c: 0x22c: %08x, subsystem: %04x:%04x\n",
+		ndev->name, le32_to_cpu(readl(dev->base + 0x22c)),
+		pci_dev->subsystem_vendor, pci_dev->subsystem_device);
+
+	ndev->netdev_ops = &netdev_ops;
+	ndev->ethtool_ops = &ops;
+	ndev->watchdog_timeo = 5 * HZ;
+	pci_set_drvdata(pci_dev, ndev);
+
+	ns83820_do_reset(dev, CR_RST);
+
+	/* Must reset the ram bist before running it */
+	writel(PTSCR_RBIST_RST, dev->base + PTSCR);
+	ns83820_run_bist(ndev, "sram bist",   PTSCR_RBIST_EN,
+			 PTSCR_RBIST_DONE, PTSCR_RBIST_FAIL);
+	ns83820_run_bist(ndev, "eeprom bist", PTSCR_EEBIST_EN, 0,
+			 PTSCR_EEBIST_FAIL);
+	ns83820_run_bist(ndev, "eeprom load", PTSCR_EELOAD_EN, 0, 0);
+
+	/* I love config registers */
+	dev->CFG_cache = readl(dev->base + CFG);
+
+	if ((dev->CFG_cache & CFG_PCI64_DET)) {
+		printk(KERN_INFO "%s: detected 64 bit PCI data bus.\n",
+			ndev->name);
+		/*dev->CFG_cache |= CFG_DATA64_EN;*/
+		if (!(dev->CFG_cache & CFG_DATA64_EN))
+			printk(KERN_INFO "%s: EEPROM did not enable 64 bit bus.  Disabled.\n",
+				ndev->name);
+	} else
+		dev->CFG_cache &= ~(CFG_DATA64_EN);
+
+	dev->CFG_cache &= (CFG_TBI_EN  | CFG_MRM_DIS   | CFG_MWI_DIS |
+			   CFG_T64ADDR | CFG_DATA64_EN | CFG_EXT_125 |
+			   CFG_M64ADDR);
+	dev->CFG_cache |= CFG_PINT_DUPSTS | CFG_PINT_LNKSTS | CFG_PINT_SPDSTS |
+			  CFG_EXTSTS_EN   | CFG_EXD         | CFG_PESEL;
+	dev->CFG_cache |= CFG_REQALG;
+	dev->CFG_cache |= CFG_POW;
+	dev->CFG_cache |= CFG_TMRTEST;
+
+	/* When compiled with 64 bit addressing, we must always enable
+	 * the 64 bit descriptor format.
+	 */
+	if (sizeof(dma_addr_t) == 8)
+		dev->CFG_cache |= CFG_M64ADDR;
+	if (using_dac)
+		dev->CFG_cache |= CFG_T64ADDR;
+
+	/* Big endian mode does not seem to do what the docs suggest */
+	dev->CFG_cache &= ~CFG_BEM;
+
+	/* setup optical transceiver if we have one */
+	if (dev->CFG_cache & CFG_TBI_EN) {
+		printk(KERN_INFO "%s: enabling optical transceiver\n",
+			ndev->name);
+		writel(readl(dev->base + GPIOR) | 0x3e8, dev->base + GPIOR);
+
+		/* setup auto negotiation feature advertisement */
+		writel(readl(dev->base + TANAR)
+		       | TANAR_HALF_DUP | TANAR_FULL_DUP,
+		       dev->base + TANAR);
+
+		/* start auto negotiation */
+		writel(TBICR_MR_AN_ENABLE | TBICR_MR_RESTART_AN,
+		       dev->base + TBICR);
+		writel(TBICR_MR_AN_ENABLE, dev->base + TBICR);
+		dev->linkstate = LINK_AUTONEGOTIATE;
+
+		dev->CFG_cache |= CFG_MODE_1000;
+	}
+
+	writel(dev->CFG_cache, dev->base + CFG);
+	dprintk("CFG: %08x\n", dev->CFG_cache);
+
+	if (reset_phy) {
+		printk(KERN_INFO "%s: resetting phy\n", ndev->name);
+		writel(dev->CFG_cache | CFG_PHY_RST, dev->base + CFG);
+		msleep(10);
+		writel(dev->CFG_cache, dev->base + CFG);
+	}
+
+#if 0	/* Huh?  This sets the PCI latency register.  Should be done via
+	 * the PCI layer.  FIXME.
+	 */
+	if (readl(dev->base + SRR))
+		writel(readl(dev->base+0x20c) | 0xfe00, dev->base + 0x20c);
+#endif
+
+	/* Note!  The DMA burst size interacts with packet
+	 * transmission, such that the largest packet that
+	 * can be transmitted is 8192 - FLTH - burst size.
+	 * If only the transmit fifo was larger...
+	 */
+	/* Ramit : 1024 DMA is not a good idea, it ends up banging
+	 * some DELL and COMPAQ SMP systems */
+	writel(TXCFG_CSI | TXCFG_HBI | TXCFG_ATP | TXCFG_MXDMA512
+		| ((1600 / 32) * 0x100),
+		dev->base + TXCFG);
+
+	/* Flush the interrupt holdoff timer */
+	writel(0x000, dev->base + IHR);
+	writel(0x100, dev->base + IHR);
+	writel(0x000, dev->base + IHR);
+
+	/* Set Rx to full duplex, don't accept runt, errored, long or length
+	 * range errored packets.  Use 512 byte DMA.
+	 */
+	/* Ramit : 1024 DMA is not a good idea, it ends up banging
+	 * some DELL and COMPAQ SMP systems
+	 * Turn on ALP, only we are accpeting Jumbo Packets */
+	writel(RXCFG_AEP | RXCFG_ARP | RXCFG_AIRL | RXCFG_RX_FD
+		| RXCFG_STRIPCRC
+		//| RXCFG_ALP
+		| (RXCFG_MXDMA512) | 0, dev->base + RXCFG);
+
+	/* Disable priority queueing */
+	writel(0, dev->base + PQCR);
+
+	/* Enable IP checksum validation and detetion of VLAN headers.
+	 * Note: do not set the reject options as at least the 0x102
+	 * revision of the chip does not properly accept IP fragments
+	 * at least for UDP.
+	 */
+	/* Ramit : Be sure to turn on RXCFG_ARP if VLAN's are enabled, since
+	 * the MAC it calculates the packetsize AFTER stripping the VLAN
+	 * header, and if a VLAN Tagged packet of 64 bytes is received (like
+	 * a ping with a VLAN header) then the card, strips the 4 byte VLAN
+	 * tag and then checks the packet size, so if RXCFG_ARP is not enabled,
+	 * it discrards it!.  These guys......
+	 * also turn on tag stripping if hardware acceleration is enabled
+	 */
+#ifdef NS83820_VLAN_ACCEL_SUPPORT
+#define VRCR_INIT_VALUE (VRCR_IPEN|VRCR_VTDEN|VRCR_VTREN)
+#else
+#define VRCR_INIT_VALUE (VRCR_IPEN|VRCR_VTDEN)
+#endif
+	writel(VRCR_INIT_VALUE, dev->base + VRCR);
+
+	/* Enable per-packet TCP/UDP/IP checksumming
+	 * and per packet vlan tag insertion if
+	 * vlan hardware acceleration is enabled
+	 */
+#ifdef NS83820_VLAN_ACCEL_SUPPORT
+#define VTCR_INIT_VALUE (VTCR_PPCHK|VTCR_VPPTI)
+#else
+#define VTCR_INIT_VALUE VTCR_PPCHK
+#endif
+	writel(VTCR_INIT_VALUE, dev->base + VTCR);
+
+	/* Ramit : Enable async and sync pause frames */
+	/* writel(0, dev->base + PCR); */
+	writel((PCR_PS_MCAST | PCR_PS_DA | PCR_PSEN | PCR_FFLO_4K |
+		PCR_FFHI_8K | PCR_STLO_4 | PCR_STHI_8 | PCR_PAUSE_CNT),
+		dev->base + PCR);
+
+	/* Disable Wake On Lan */
+	writel(0, dev->base + WCSR);
+
+	ns83820_getmac(dev, ndev->dev_addr);
+
+	/* Yes, we support dumb IP checksum on transmit */
+	ndev->features |= NETIF_F_SG;
+	ndev->features |= NETIF_F_IP_CSUM;
+
+	ndev->min_mtu = 0;
+
+#ifdef NS83820_VLAN_ACCEL_SUPPORT
+	/* We also support hardware vlan acceleration */
+	ndev->features |= NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX;
+#endif
+
+	if (using_dac) {
+		printk(KERN_INFO "%s: using 64 bit addressing.\n",
+			ndev->name);
+		ndev->features |= NETIF_F_HIGHDMA;
+	}
+
+	printk(KERN_INFO "%s: ns83820 v" VERSION ": DP83820 v%u.%u: %pM io=0x%08lx irq=%d f=%s\n",
+		ndev->name,
+		(unsigned)readl(dev->base + SRR) >> 8,
+		(unsigned)readl(dev->base + SRR) & 0xff,
+		ndev->dev_addr, addr, pci_dev->irq,
+		(ndev->features & NETIF_F_HIGHDMA) ? "h,sg" : "sg"
+		);
+
+#ifdef PHY_CODE_IS_FINISHED
+	ns83820_probe_phy(ndev);
+#endif
+
+	err = register_netdevice(ndev);
+	if (err) {
+		printk(KERN_INFO "ns83820: unable to register netdev: %d\n", err);
+		goto out_cleanup;
+	}
+	rtnl_unlock();
+
+	return 0;
+
+out_cleanup:
+	ns83820_disable_interrupts(dev); /* paranoia */
+out_free_irq:
+	rtnl_unlock();
+	free_irq(pci_dev->irq, ndev);
+out_disable:
+	if (dev->base)
+		iounmap(dev->base);
+	pci_free_consistent(pci_dev, 4 * DESC_SIZE * NR_TX_DESC, dev->tx_descs, dev->tx_phy_descs);
+	pci_free_consistent(pci_dev, 4 * DESC_SIZE * NR_RX_DESC, dev->rx_info.descs, dev->rx_info.phy_descs);
+	pci_disable_device(pci_dev);
+out_free:
+	free_netdev(ndev);
+out:
+	return err;
+}
+
+static void ns83820_remove_one(struct pci_dev *pci_dev)
+{
+	struct net_device *ndev = pci_get_drvdata(pci_dev);
+	struct ns83820 *dev = PRIV(ndev); /* ok even if NULL */
+
+	if (!ndev)			/* paranoia */
+		return;
+
+	ns83820_disable_interrupts(dev); /* paranoia */
+
+	unregister_netdev(ndev);
+	free_irq(dev->pci_dev->irq, ndev);
+	iounmap(dev->base);
+	pci_free_consistent(dev->pci_dev, 4 * DESC_SIZE * NR_TX_DESC,
+			dev->tx_descs, dev->tx_phy_descs);
+	pci_free_consistent(dev->pci_dev, 4 * DESC_SIZE * NR_RX_DESC,
+			dev->rx_info.descs, dev->rx_info.phy_descs);
+	pci_disable_device(dev->pci_dev);
+	free_netdev(ndev);
+}
+
+static const struct pci_device_id ns83820_pci_tbl[] = {
+	{ 0x100b, 0x0022, PCI_ANY_ID, PCI_ANY_ID, 0, .driver_data = 0, },
+	{ 0, },
+};
+
+static struct pci_driver driver = {
+	.name		= "ns83820",
+	.id_table	= ns83820_pci_tbl,
+	.probe		= ns83820_init_one,
+	.remove		= ns83820_remove_one,
+#if 0	/* FIXME: implement */
+	.suspend	= ,
+	.resume		= ,
+#endif
+};
+
+
+static int __init ns83820_init(void)
+{
+	printk(KERN_INFO "ns83820.c: National Semiconductor DP83820 10/100/1000 driver.\n");
+	return pci_register_driver(&driver);
+}
+
+static void __exit ns83820_exit(void)
+{
+	pci_unregister_driver(&driver);
+}
+
+MODULE_AUTHOR("Benjamin LaHaise <bcrl@kvack.org>");
+MODULE_DESCRIPTION("National Semiconductor DP83820 10/100/1000 driver");
+MODULE_LICENSE("GPL");
+
+MODULE_DEVICE_TABLE(pci, ns83820_pci_tbl);
+
+module_param(lnksts, int, 0);
+MODULE_PARM_DESC(lnksts, "Polarity of LNKSTS bit");
+
+module_param(ihr, int, 0);
+MODULE_PARM_DESC(ihr, "Time in 100 us increments to delay interrupts (range 0-127)");
+
+module_param(reset_phy, int, 0);
+MODULE_PARM_DESC(reset_phy, "Set to 1 to reset the PHY on startup");
+
+module_init(ns83820_init);
+module_exit(ns83820_exit);
diff --git a/drivers/net/ethernet/natsemi/sonic.c b/drivers/net/ethernet/natsemi/sonic.c
new file mode 100644
index 000000000..69282f31d
--- /dev/null
+++ b/drivers/net/ethernet/natsemi/sonic.c
@@ -0,0 +1,824 @@
+/*
+ * sonic.c
+ *
+ * (C) 2005 Finn Thain
+ *
+ * Converted to DMA API, added zero-copy buffer handling, and
+ * (from the mac68k project) introduced dhd's support for 16-bit cards.
+ *
+ * (C) 1996,1998 by Thomas Bogendoerfer (tsbogend@alpha.franken.de)
+ *
+ * This driver is based on work from Andreas Busse, but most of
+ * the code is rewritten.
+ *
+ * (C) 1995 by Andreas Busse (andy@waldorf-gmbh.de)
+ *
+ *    Core code included by system sonic drivers
+ *
+ * And... partially rewritten again by David Huggins-Daines in order
+ * to cope with screwed up Macintosh NICs that may or may not use
+ * 16-bit DMA.
+ *
+ * (C) 1999 David Huggins-Daines <dhd@debian.org>
+ *
+ */
+
+/*
+ * Sources: Olivetti M700-10 Risc Personal Computer hardware handbook,
+ * National Semiconductors data sheet for the DP83932B Sonic Ethernet
+ * controller, and the files "8390.c" and "skeleton.c" in this directory.
+ *
+ * Additional sources: Nat Semi data sheet for the DP83932C and Nat Semi
+ * Application Note AN-746, the files "lance.c" and "ibmlana.c". See also
+ * the NetBSD file "sys/arch/mac68k/dev/if_sn.c".
+ */
+
+static unsigned int version_printed;
+
+static int sonic_debug = -1;
+module_param(sonic_debug, int, 0);
+MODULE_PARM_DESC(sonic_debug, "debug message level");
+
+static void sonic_msg_init(struct net_device *dev)
+{
+	struct sonic_local *lp = netdev_priv(dev);
+
+	lp->msg_enable = netif_msg_init(sonic_debug, 0);
+
+	if (version_printed++ == 0)
+		netif_dbg(lp, drv, dev, "%s", version);
+}
+
+/*
+ * Open/initialize the SONIC controller.
+ *
+ * This routine should set everything up anew at each open, even
+ *  registers that "should" only need to be set once at boot, so that
+ *  there is non-reboot way to recover if something goes wrong.
+ */
+static int sonic_open(struct net_device *dev)
+{
+	struct sonic_local *lp = netdev_priv(dev);
+	int i;
+
+	netif_dbg(lp, ifup, dev, "%s: initializing sonic driver\n", __func__);
+
+	spin_lock_init(&lp->lock);
+
+	for (i = 0; i < SONIC_NUM_RRS; i++) {
+		struct sk_buff *skb = netdev_alloc_skb(dev, SONIC_RBSIZE + 2);
+		if (skb == NULL) {
+			while(i > 0) { /* free any that were allocated successfully */
+				i--;
+				dev_kfree_skb(lp->rx_skb[i]);
+				lp->rx_skb[i] = NULL;
+			}
+			printk(KERN_ERR "%s: couldn't allocate receive buffers\n",
+			       dev->name);
+			return -ENOMEM;
+		}
+		/* align IP header unless DMA requires otherwise */
+		if (SONIC_BUS_SCALE(lp->dma_bitmode) == 2)
+			skb_reserve(skb, 2);
+		lp->rx_skb[i] = skb;
+	}
+
+	for (i = 0; i < SONIC_NUM_RRS; i++) {
+		dma_addr_t laddr = dma_map_single(lp->device, skb_put(lp->rx_skb[i], SONIC_RBSIZE),
+		                                  SONIC_RBSIZE, DMA_FROM_DEVICE);
+		if (dma_mapping_error(lp->device, laddr)) {
+			while(i > 0) { /* free any that were mapped successfully */
+				i--;
+				dma_unmap_single(lp->device, lp->rx_laddr[i], SONIC_RBSIZE, DMA_FROM_DEVICE);
+				lp->rx_laddr[i] = (dma_addr_t)0;
+			}
+			for (i = 0; i < SONIC_NUM_RRS; i++) {
+				dev_kfree_skb(lp->rx_skb[i]);
+				lp->rx_skb[i] = NULL;
+			}
+			printk(KERN_ERR "%s: couldn't map rx DMA buffers\n",
+			       dev->name);
+			return -ENOMEM;
+		}
+		lp->rx_laddr[i] = laddr;
+	}
+
+	/*
+	 * Initialize the SONIC
+	 */
+	sonic_init(dev);
+
+	netif_start_queue(dev);
+
+	netif_dbg(lp, ifup, dev, "%s: Initialization done\n", __func__);
+
+	return 0;
+}
+
+/* Wait for the SONIC to become idle. */
+static void sonic_quiesce(struct net_device *dev, u16 mask)
+{
+	struct sonic_local * __maybe_unused lp = netdev_priv(dev);
+	int i;
+	u16 bits;
+
+	for (i = 0; i < 1000; ++i) {
+		bits = SONIC_READ(SONIC_CMD) & mask;
+		if (!bits)
+			return;
+		if (irqs_disabled() || in_interrupt())
+			udelay(20);
+		else
+			usleep_range(100, 200);
+	}
+	WARN_ONCE(1, "command deadline expired! 0x%04x\n", bits);
+}
+
+/*
+ * Close the SONIC device
+ */
+static int sonic_close(struct net_device *dev)
+{
+	struct sonic_local *lp = netdev_priv(dev);
+	int i;
+
+	netif_dbg(lp, ifdown, dev, "%s\n", __func__);
+
+	netif_stop_queue(dev);
+
+	/*
+	 * stop the SONIC, disable interrupts
+	 */
+	SONIC_WRITE(SONIC_CMD, SONIC_CR_RXDIS);
+	sonic_quiesce(dev, SONIC_CR_ALL);
+
+	SONIC_WRITE(SONIC_IMR, 0);
+	SONIC_WRITE(SONIC_ISR, 0x7fff);
+	SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);
+
+	/* unmap and free skbs that haven't been transmitted */
+	for (i = 0; i < SONIC_NUM_TDS; i++) {
+		if(lp->tx_laddr[i]) {
+			dma_unmap_single(lp->device, lp->tx_laddr[i], lp->tx_len[i], DMA_TO_DEVICE);
+			lp->tx_laddr[i] = (dma_addr_t)0;
+		}
+		if(lp->tx_skb[i]) {
+			dev_kfree_skb(lp->tx_skb[i]);
+			lp->tx_skb[i] = NULL;
+		}
+	}
+
+	/* unmap and free the receive buffers */
+	for (i = 0; i < SONIC_NUM_RRS; i++) {
+		if(lp->rx_laddr[i]) {
+			dma_unmap_single(lp->device, lp->rx_laddr[i], SONIC_RBSIZE, DMA_FROM_DEVICE);
+			lp->rx_laddr[i] = (dma_addr_t)0;
+		}
+		if(lp->rx_skb[i]) {
+			dev_kfree_skb(lp->rx_skb[i]);
+			lp->rx_skb[i] = NULL;
+		}
+	}
+
+	return 0;
+}
+
+static void sonic_tx_timeout(struct net_device *dev)
+{
+	struct sonic_local *lp = netdev_priv(dev);
+	int i;
+	/*
+	 * put the Sonic into software-reset mode and
+	 * disable all interrupts before releasing DMA buffers
+	 */
+	SONIC_WRITE(SONIC_CMD, SONIC_CR_RXDIS);
+	sonic_quiesce(dev, SONIC_CR_ALL);
+
+	SONIC_WRITE(SONIC_IMR, 0);
+	SONIC_WRITE(SONIC_ISR, 0x7fff);
+	SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);
+	/* We could resend the original skbs. Easier to re-initialise. */
+	for (i = 0; i < SONIC_NUM_TDS; i++) {
+		if(lp->tx_laddr[i]) {
+			dma_unmap_single(lp->device, lp->tx_laddr[i], lp->tx_len[i], DMA_TO_DEVICE);
+			lp->tx_laddr[i] = (dma_addr_t)0;
+		}
+		if(lp->tx_skb[i]) {
+			dev_kfree_skb(lp->tx_skb[i]);
+			lp->tx_skb[i] = NULL;
+		}
+	}
+	/* Try to restart the adaptor. */
+	sonic_init(dev);
+	lp->stats.tx_errors++;
+	netif_trans_update(dev); /* prevent tx timeout */
+	netif_wake_queue(dev);
+}
+
+/*
+ * transmit packet
+ *
+ * Appends new TD during transmission thus avoiding any TX interrupts
+ * until we run out of TDs.
+ * This routine interacts closely with the ISR in that it may,
+ *   set tx_skb[i]
+ *   reset the status flags of the new TD
+ *   set and reset EOL flags
+ *   stop the tx queue
+ * The ISR interacts with this routine in various ways. It may,
+ *   reset tx_skb[i]
+ *   test the EOL and status flags of the TDs
+ *   wake the tx queue
+ * Concurrently with all of this, the SONIC is potentially writing to
+ * the status flags of the TDs.
+ */
+
+static int sonic_send_packet(struct sk_buff *skb, struct net_device *dev)
+{
+	struct sonic_local *lp = netdev_priv(dev);
+	dma_addr_t laddr;
+	int length;
+	int entry;
+	unsigned long flags;
+
+	netif_dbg(lp, tx_queued, dev, "%s: skb=%p\n", __func__, skb);
+
+	length = skb->len;
+	if (length < ETH_ZLEN) {
+		if (skb_padto(skb, ETH_ZLEN))
+			return NETDEV_TX_OK;
+		length = ETH_ZLEN;
+	}
+
+	/*
+	 * Map the packet data into the logical DMA address space
+	 */
+
+	laddr = dma_map_single(lp->device, skb->data, length, DMA_TO_DEVICE);
+	if (!laddr) {
+		pr_err_ratelimited("%s: failed to map tx DMA buffer.\n", dev->name);
+		dev_kfree_skb_any(skb);
+		return NETDEV_TX_OK;
+	}
+
+	spin_lock_irqsave(&lp->lock, flags);
+
+	entry = lp->next_tx;
+
+	sonic_tda_put(dev, entry, SONIC_TD_STATUS, 0);       /* clear status */
+	sonic_tda_put(dev, entry, SONIC_TD_FRAG_COUNT, 1);   /* single fragment */
+	sonic_tda_put(dev, entry, SONIC_TD_PKTSIZE, length); /* length of packet */
+	sonic_tda_put(dev, entry, SONIC_TD_FRAG_PTR_L, laddr & 0xffff);
+	sonic_tda_put(dev, entry, SONIC_TD_FRAG_PTR_H, laddr >> 16);
+	sonic_tda_put(dev, entry, SONIC_TD_FRAG_SIZE, length);
+	sonic_tda_put(dev, entry, SONIC_TD_LINK,
+		sonic_tda_get(dev, entry, SONIC_TD_LINK) | SONIC_EOL);
+
+	wmb();
+	lp->tx_len[entry] = length;
+	lp->tx_laddr[entry] = laddr;
+	lp->tx_skb[entry] = skb;
+
+	wmb();
+	sonic_tda_put(dev, lp->eol_tx, SONIC_TD_LINK,
+				  sonic_tda_get(dev, lp->eol_tx, SONIC_TD_LINK) & ~SONIC_EOL);
+	lp->eol_tx = entry;
+
+	lp->next_tx = (entry + 1) & SONIC_TDS_MASK;
+	if (lp->tx_skb[lp->next_tx] != NULL) {
+		/* The ring is full, the ISR has yet to process the next TD. */
+		netif_dbg(lp, tx_queued, dev, "%s: stopping queue\n", __func__);
+		netif_stop_queue(dev);
+		/* after this packet, wait for ISR to free up some TDAs */
+	} else netif_start_queue(dev);
+
+	netif_dbg(lp, tx_queued, dev, "%s: issuing Tx command\n", __func__);
+
+	SONIC_WRITE(SONIC_CMD, SONIC_CR_TXP);
+
+	spin_unlock_irqrestore(&lp->lock, flags);
+
+	return NETDEV_TX_OK;
+}
+
+/*
+ * The typical workload of the driver:
+ * Handle the network interface interrupts.
+ */
+static irqreturn_t sonic_interrupt(int irq, void *dev_id)
+{
+	struct net_device *dev = dev_id;
+	struct sonic_local *lp = netdev_priv(dev);
+	int status;
+	unsigned long flags;
+
+	/* The lock has two purposes. Firstly, it synchronizes sonic_interrupt()
+	 * with sonic_send_packet() so that the two functions can share state.
+	 * Secondly, it makes sonic_interrupt() re-entrant, as that is required
+	 * by macsonic which must use two IRQs with different priority levels.
+	 */
+	spin_lock_irqsave(&lp->lock, flags);
+
+	status = SONIC_READ(SONIC_ISR) & SONIC_IMR_DEFAULT;
+	if (!status) {
+		spin_unlock_irqrestore(&lp->lock, flags);
+
+		return IRQ_NONE;
+	}
+
+	do {
+		SONIC_WRITE(SONIC_ISR, status); /* clear the interrupt(s) */
+
+		if (status & SONIC_INT_PKTRX) {
+			netif_dbg(lp, intr, dev, "%s: packet rx\n", __func__);
+			sonic_rx(dev);	/* got packet(s) */
+		}
+
+		if (status & SONIC_INT_TXDN) {
+			int entry = lp->cur_tx;
+			int td_status;
+			int freed_some = 0;
+
+			/* The state of a Transmit Descriptor may be inferred
+			 * from { tx_skb[entry], td_status } as follows.
+			 * { clear, clear } => the TD has never been used
+			 * { set,   clear } => the TD was handed to SONIC
+			 * { set,   set   } => the TD was handed back
+			 * { clear, set   } => the TD is available for re-use
+			 */
+
+			netif_dbg(lp, intr, dev, "%s: tx done\n", __func__);
+
+			while (lp->tx_skb[entry] != NULL) {
+				if ((td_status = sonic_tda_get(dev, entry, SONIC_TD_STATUS)) == 0)
+					break;
+
+				if (td_status & SONIC_TCR_PTX) {
+					lp->stats.tx_packets++;
+					lp->stats.tx_bytes += sonic_tda_get(dev, entry, SONIC_TD_PKTSIZE);
+				} else {
+					if (td_status & (SONIC_TCR_EXD |
+					    SONIC_TCR_EXC | SONIC_TCR_BCM))
+						lp->stats.tx_aborted_errors++;
+					if (td_status &
+					    (SONIC_TCR_NCRS | SONIC_TCR_CRLS))
+						lp->stats.tx_carrier_errors++;
+					if (td_status & SONIC_TCR_OWC)
+						lp->stats.tx_window_errors++;
+					if (td_status & SONIC_TCR_FU)
+						lp->stats.tx_fifo_errors++;
+				}
+
+				/* We must free the original skb */
+				dev_kfree_skb_irq(lp->tx_skb[entry]);
+				lp->tx_skb[entry] = NULL;
+				/* and unmap DMA buffer */
+				dma_unmap_single(lp->device, lp->tx_laddr[entry], lp->tx_len[entry], DMA_TO_DEVICE);
+				lp->tx_laddr[entry] = (dma_addr_t)0;
+				freed_some = 1;
+
+				if (sonic_tda_get(dev, entry, SONIC_TD_LINK) & SONIC_EOL) {
+					entry = (entry + 1) & SONIC_TDS_MASK;
+					break;
+				}
+				entry = (entry + 1) & SONIC_TDS_MASK;
+			}
+
+			if (freed_some || lp->tx_skb[entry] == NULL)
+				netif_wake_queue(dev);  /* The ring is no longer full */
+			lp->cur_tx = entry;
+		}
+
+		/*
+		 * check error conditions
+		 */
+		if (status & SONIC_INT_RFO) {
+			netif_dbg(lp, rx_err, dev, "%s: rx fifo overrun\n",
+				  __func__);
+		}
+		if (status & SONIC_INT_RDE) {
+			netif_dbg(lp, rx_err, dev, "%s: rx descriptors exhausted\n",
+				  __func__);
+		}
+		if (status & SONIC_INT_RBAE) {
+			netif_dbg(lp, rx_err, dev, "%s: rx buffer area exceeded\n",
+				  __func__);
+		}
+
+		/* counter overruns; all counters are 16bit wide */
+		if (status & SONIC_INT_FAE)
+			lp->stats.rx_frame_errors += 65536;
+		if (status & SONIC_INT_CRC)
+			lp->stats.rx_crc_errors += 65536;
+		if (status & SONIC_INT_MP)
+			lp->stats.rx_missed_errors += 65536;
+
+		/* transmit error */
+		if (status & SONIC_INT_TXER) {
+			u16 tcr = SONIC_READ(SONIC_TCR);
+
+			netif_dbg(lp, tx_err, dev, "%s: TXER intr, TCR %04x\n",
+				  __func__, tcr);
+
+			if (tcr & (SONIC_TCR_EXD | SONIC_TCR_EXC |
+				   SONIC_TCR_FU | SONIC_TCR_BCM)) {
+				/* Aborted transmission. Try again. */
+				netif_stop_queue(dev);
+				SONIC_WRITE(SONIC_CMD, SONIC_CR_TXP);
+			}
+		}
+
+		/* bus retry */
+		if (status & SONIC_INT_BR) {
+			printk(KERN_ERR "%s: Bus retry occurred! Device interrupt disabled.\n",
+				dev->name);
+			/* ... to help debug DMA problems causing endless interrupts. */
+			/* Bounce the eth interface to turn on the interrupt again. */
+			SONIC_WRITE(SONIC_IMR, 0);
+		}
+
+		status = SONIC_READ(SONIC_ISR) & SONIC_IMR_DEFAULT;
+	} while (status);
+
+	spin_unlock_irqrestore(&lp->lock, flags);
+
+	return IRQ_HANDLED;
+}
+
+/* Return the array index corresponding to a given Receive Buffer pointer. */
+static int index_from_addr(struct sonic_local *lp, dma_addr_t addr,
+			   unsigned int last)
+{
+	unsigned int i = last;
+
+	do {
+		i = (i + 1) & SONIC_RRS_MASK;
+		if (addr == lp->rx_laddr[i])
+			return i;
+	} while (i != last);
+
+	return -ENOENT;
+}
+
+/* Allocate and map a new skb to be used as a receive buffer. */
+static bool sonic_alloc_rb(struct net_device *dev, struct sonic_local *lp,
+			   struct sk_buff **new_skb, dma_addr_t *new_addr)
+{
+	*new_skb = netdev_alloc_skb(dev, SONIC_RBSIZE + 2);
+	if (!*new_skb)
+		return false;
+
+	if (SONIC_BUS_SCALE(lp->dma_bitmode) == 2)
+		skb_reserve(*new_skb, 2);
+
+	*new_addr = dma_map_single(lp->device, skb_put(*new_skb, SONIC_RBSIZE),
+				   SONIC_RBSIZE, DMA_FROM_DEVICE);
+	if (!*new_addr) {
+		dev_kfree_skb(*new_skb);
+		*new_skb = NULL;
+		return false;
+	}
+
+	return true;
+}
+
+/* Place a new receive resource in the Receive Resource Area and update RWP. */
+static void sonic_update_rra(struct net_device *dev, struct sonic_local *lp,
+			     dma_addr_t old_addr, dma_addr_t new_addr)
+{
+	unsigned int entry = sonic_rr_entry(dev, SONIC_READ(SONIC_RWP));
+	unsigned int end = sonic_rr_entry(dev, SONIC_READ(SONIC_RRP));
+	u32 buf;
+
+	/* The resources in the range [RRP, RWP) belong to the SONIC. This loop
+	 * scans the other resources in the RRA, those in the range [RWP, RRP).
+	 */
+	do {
+		buf = (sonic_rra_get(dev, entry, SONIC_RR_BUFADR_H) << 16) |
+		      sonic_rra_get(dev, entry, SONIC_RR_BUFADR_L);
+
+		if (buf == old_addr)
+			break;
+
+		entry = (entry + 1) & SONIC_RRS_MASK;
+	} while (entry != end);
+
+	WARN_ONCE(buf != old_addr, "failed to find resource!\n");
+
+	sonic_rra_put(dev, entry, SONIC_RR_BUFADR_H, new_addr >> 16);
+	sonic_rra_put(dev, entry, SONIC_RR_BUFADR_L, new_addr & 0xffff);
+
+	entry = (entry + 1) & SONIC_RRS_MASK;
+
+	SONIC_WRITE(SONIC_RWP, sonic_rr_addr(dev, entry));
+}
+
+/*
+ * We have a good packet(s), pass it/them up the network stack.
+ */
+static void sonic_rx(struct net_device *dev)
+{
+	struct sonic_local *lp = netdev_priv(dev);
+	int entry = lp->cur_rx;
+	int prev_entry = lp->eol_rx;
+	bool rbe = false;
+
+	while (sonic_rda_get(dev, entry, SONIC_RD_IN_USE) == 0) {
+		u16 status = sonic_rda_get(dev, entry, SONIC_RD_STATUS);
+
+		/* If the RD has LPKT set, the chip has finished with the RB */
+		if ((status & SONIC_RCR_PRX) && (status & SONIC_RCR_LPKT)) {
+			struct sk_buff *new_skb;
+			dma_addr_t new_laddr;
+			u32 addr = (sonic_rda_get(dev, entry,
+						  SONIC_RD_PKTPTR_H) << 16) |
+				   sonic_rda_get(dev, entry, SONIC_RD_PKTPTR_L);
+			int i = index_from_addr(lp, addr, entry);
+
+			if (i < 0) {
+				WARN_ONCE(1, "failed to find buffer!\n");
+				break;
+			}
+
+			if (sonic_alloc_rb(dev, lp, &new_skb, &new_laddr)) {
+				struct sk_buff *used_skb = lp->rx_skb[i];
+				int pkt_len;
+
+				/* Pass the used buffer up the stack */
+				dma_unmap_single(lp->device, addr, SONIC_RBSIZE,
+						 DMA_FROM_DEVICE);
+
+				pkt_len = sonic_rda_get(dev, entry,
+							SONIC_RD_PKTLEN);
+				skb_trim(used_skb, pkt_len);
+				used_skb->protocol = eth_type_trans(used_skb,
+								    dev);
+				netif_rx(used_skb);
+				lp->stats.rx_packets++;
+				lp->stats.rx_bytes += pkt_len;
+
+				lp->rx_skb[i] = new_skb;
+				lp->rx_laddr[i] = new_laddr;
+			} else {
+				/* Failed to obtain a new buffer so re-use it */
+				new_laddr = addr;
+				lp->stats.rx_dropped++;
+			}
+			/* If RBE is already asserted when RWP advances then
+			 * it's safe to clear RBE after processing this packet.
+			 */
+			rbe = rbe || SONIC_READ(SONIC_ISR) & SONIC_INT_RBE;
+			sonic_update_rra(dev, lp, addr, new_laddr);
+		}
+		/*
+		 * give back the descriptor
+		 */
+		sonic_rda_put(dev, entry, SONIC_RD_STATUS, 0);
+		sonic_rda_put(dev, entry, SONIC_RD_IN_USE, 1);
+
+		prev_entry = entry;
+		entry = (entry + 1) & SONIC_RDS_MASK;
+	}
+
+	lp->cur_rx = entry;
+
+	if (prev_entry != lp->eol_rx) {
+		/* Advance the EOL flag to put descriptors back into service */
+		sonic_rda_put(dev, prev_entry, SONIC_RD_LINK, SONIC_EOL |
+			      sonic_rda_get(dev, prev_entry, SONIC_RD_LINK));
+		sonic_rda_put(dev, lp->eol_rx, SONIC_RD_LINK, ~SONIC_EOL &
+			      sonic_rda_get(dev, lp->eol_rx, SONIC_RD_LINK));
+		lp->eol_rx = prev_entry;
+	}
+
+	if (rbe)
+		SONIC_WRITE(SONIC_ISR, SONIC_INT_RBE);
+	/*
+	 * If any worth-while packets have been received, netif_rx()
+	 * has done a mark_bh(NET_BH) for us and will work on them
+	 * when we get to the bottom-half routine.
+	 */
+}
+
+
+/*
+ * Get the current statistics.
+ * This may be called with the device open or closed.
+ */
+static struct net_device_stats *sonic_get_stats(struct net_device *dev)
+{
+	struct sonic_local *lp = netdev_priv(dev);
+
+	/* read the tally counter from the SONIC and reset them */
+	lp->stats.rx_crc_errors += SONIC_READ(SONIC_CRCT);
+	SONIC_WRITE(SONIC_CRCT, 0xffff);
+	lp->stats.rx_frame_errors += SONIC_READ(SONIC_FAET);
+	SONIC_WRITE(SONIC_FAET, 0xffff);
+	lp->stats.rx_missed_errors += SONIC_READ(SONIC_MPT);
+	SONIC_WRITE(SONIC_MPT, 0xffff);
+
+	return &lp->stats;
+}
+
+
+/*
+ * Set or clear the multicast filter for this adaptor.
+ */
+static void sonic_multicast_list(struct net_device *dev)
+{
+	struct sonic_local *lp = netdev_priv(dev);
+	unsigned int rcr;
+	struct netdev_hw_addr *ha;
+	unsigned char *addr;
+	int i;
+
+	rcr = SONIC_READ(SONIC_RCR) & ~(SONIC_RCR_PRO | SONIC_RCR_AMC);
+	rcr |= SONIC_RCR_BRD;	/* accept broadcast packets */
+
+	if (dev->flags & IFF_PROMISC) {	/* set promiscuous mode */
+		rcr |= SONIC_RCR_PRO;
+	} else {
+		if ((dev->flags & IFF_ALLMULTI) ||
+		    (netdev_mc_count(dev) > 15)) {
+			rcr |= SONIC_RCR_AMC;
+		} else {
+			unsigned long flags;
+
+			netif_dbg(lp, ifup, dev, "%s: mc_count %d\n", __func__,
+				  netdev_mc_count(dev));
+			sonic_set_cam_enable(dev, 1);  /* always enable our own address */
+			i = 1;
+			netdev_for_each_mc_addr(ha, dev) {
+				addr = ha->addr;
+				sonic_cda_put(dev, i, SONIC_CD_CAP0, addr[1] << 8 | addr[0]);
+				sonic_cda_put(dev, i, SONIC_CD_CAP1, addr[3] << 8 | addr[2]);
+				sonic_cda_put(dev, i, SONIC_CD_CAP2, addr[5] << 8 | addr[4]);
+				sonic_set_cam_enable(dev, sonic_get_cam_enable(dev) | (1 << i));
+				i++;
+			}
+			SONIC_WRITE(SONIC_CDC, 16);
+			SONIC_WRITE(SONIC_CDP, lp->cda_laddr & 0xffff);
+
+			/* LCAM and TXP commands can't be used simultaneously */
+			spin_lock_irqsave(&lp->lock, flags);
+			sonic_quiesce(dev, SONIC_CR_TXP);
+			SONIC_WRITE(SONIC_CMD, SONIC_CR_LCAM);
+			sonic_quiesce(dev, SONIC_CR_LCAM);
+			spin_unlock_irqrestore(&lp->lock, flags);
+		}
+	}
+
+	netif_dbg(lp, ifup, dev, "%s: setting RCR=%x\n", __func__, rcr);
+
+	SONIC_WRITE(SONIC_RCR, rcr);
+}
+
+
+/*
+ * Initialize the SONIC ethernet controller.
+ */
+static int sonic_init(struct net_device *dev)
+{
+	struct sonic_local *lp = netdev_priv(dev);
+	int i;
+
+	/*
+	 * put the Sonic into software-reset mode and
+	 * disable all interrupts
+	 */
+	SONIC_WRITE(SONIC_IMR, 0);
+	SONIC_WRITE(SONIC_ISR, 0x7fff);
+	SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);
+
+	/* While in reset mode, clear CAM Enable register */
+	SONIC_WRITE(SONIC_CE, 0);
+
+	/*
+	 * clear software reset flag, disable receiver, clear and
+	 * enable interrupts, then completely initialize the SONIC
+	 */
+	SONIC_WRITE(SONIC_CMD, 0);
+	SONIC_WRITE(SONIC_CMD, SONIC_CR_RXDIS | SONIC_CR_STP);
+	sonic_quiesce(dev, SONIC_CR_ALL);
+
+	/*
+	 * initialize the receive resource area
+	 */
+	netif_dbg(lp, ifup, dev, "%s: initialize receive resource area\n",
+		  __func__);
+
+	for (i = 0; i < SONIC_NUM_RRS; i++) {
+		u16 bufadr_l = (unsigned long)lp->rx_laddr[i] & 0xffff;
+		u16 bufadr_h = (unsigned long)lp->rx_laddr[i] >> 16;
+		sonic_rra_put(dev, i, SONIC_RR_BUFADR_L, bufadr_l);
+		sonic_rra_put(dev, i, SONIC_RR_BUFADR_H, bufadr_h);
+		sonic_rra_put(dev, i, SONIC_RR_BUFSIZE_L, SONIC_RBSIZE >> 1);
+		sonic_rra_put(dev, i, SONIC_RR_BUFSIZE_H, 0);
+	}
+
+	/* initialize all RRA registers */
+	SONIC_WRITE(SONIC_RSA, sonic_rr_addr(dev, 0));
+	SONIC_WRITE(SONIC_REA, sonic_rr_addr(dev, SONIC_NUM_RRS));
+	SONIC_WRITE(SONIC_RRP, sonic_rr_addr(dev, 0));
+	SONIC_WRITE(SONIC_RWP, sonic_rr_addr(dev, SONIC_NUM_RRS - 1));
+	SONIC_WRITE(SONIC_URRA, lp->rra_laddr >> 16);
+	SONIC_WRITE(SONIC_EOBC, (SONIC_RBSIZE >> 1) - (lp->dma_bitmode ? 2 : 1));
+
+	/* load the resource pointers */
+	netif_dbg(lp, ifup, dev, "%s: issuing RRRA command\n", __func__);
+
+	SONIC_WRITE(SONIC_CMD, SONIC_CR_RRRA);
+	sonic_quiesce(dev, SONIC_CR_RRRA);
+
+	/*
+	 * Initialize the receive descriptors so that they
+	 * become a circular linked list, ie. let the last
+	 * descriptor point to the first again.
+	 */
+	netif_dbg(lp, ifup, dev, "%s: initialize receive descriptors\n",
+		  __func__);
+
+	for (i=0; i<SONIC_NUM_RDS; i++) {
+		sonic_rda_put(dev, i, SONIC_RD_STATUS, 0);
+		sonic_rda_put(dev, i, SONIC_RD_PKTLEN, 0);
+		sonic_rda_put(dev, i, SONIC_RD_PKTPTR_L, 0);
+		sonic_rda_put(dev, i, SONIC_RD_PKTPTR_H, 0);
+		sonic_rda_put(dev, i, SONIC_RD_SEQNO, 0);
+		sonic_rda_put(dev, i, SONIC_RD_IN_USE, 1);
+		sonic_rda_put(dev, i, SONIC_RD_LINK,
+			lp->rda_laddr +
+			((i+1) * SIZEOF_SONIC_RD * SONIC_BUS_SCALE(lp->dma_bitmode)));
+	}
+	/* fix last descriptor */
+	sonic_rda_put(dev, SONIC_NUM_RDS - 1, SONIC_RD_LINK,
+		(lp->rda_laddr & 0xffff) | SONIC_EOL);
+	lp->eol_rx = SONIC_NUM_RDS - 1;
+	lp->cur_rx = 0;
+	SONIC_WRITE(SONIC_URDA, lp->rda_laddr >> 16);
+	SONIC_WRITE(SONIC_CRDA, lp->rda_laddr & 0xffff);
+
+	/*
+	 * initialize transmit descriptors
+	 */
+	netif_dbg(lp, ifup, dev, "%s: initialize transmit descriptors\n",
+		  __func__);
+
+	for (i = 0; i < SONIC_NUM_TDS; i++) {
+		sonic_tda_put(dev, i, SONIC_TD_STATUS, 0);
+		sonic_tda_put(dev, i, SONIC_TD_CONFIG, 0);
+		sonic_tda_put(dev, i, SONIC_TD_PKTSIZE, 0);
+		sonic_tda_put(dev, i, SONIC_TD_FRAG_COUNT, 0);
+		sonic_tda_put(dev, i, SONIC_TD_LINK,
+			(lp->tda_laddr & 0xffff) +
+			(i + 1) * SIZEOF_SONIC_TD * SONIC_BUS_SCALE(lp->dma_bitmode));
+		lp->tx_skb[i] = NULL;
+	}
+	/* fix last descriptor */
+	sonic_tda_put(dev, SONIC_NUM_TDS - 1, SONIC_TD_LINK,
+		(lp->tda_laddr & 0xffff));
+
+	SONIC_WRITE(SONIC_UTDA, lp->tda_laddr >> 16);
+	SONIC_WRITE(SONIC_CTDA, lp->tda_laddr & 0xffff);
+	lp->cur_tx = lp->next_tx = 0;
+	lp->eol_tx = SONIC_NUM_TDS - 1;
+
+	/*
+	 * put our own address to CAM desc[0]
+	 */
+	sonic_cda_put(dev, 0, SONIC_CD_CAP0, dev->dev_addr[1] << 8 | dev->dev_addr[0]);
+	sonic_cda_put(dev, 0, SONIC_CD_CAP1, dev->dev_addr[3] << 8 | dev->dev_addr[2]);
+	sonic_cda_put(dev, 0, SONIC_CD_CAP2, dev->dev_addr[5] << 8 | dev->dev_addr[4]);
+	sonic_set_cam_enable(dev, 1);
+
+	for (i = 0; i < 16; i++)
+		sonic_cda_put(dev, i, SONIC_CD_ENTRY_POINTER, i);
+
+	/*
+	 * initialize CAM registers
+	 */
+	SONIC_WRITE(SONIC_CDP, lp->cda_laddr & 0xffff);
+	SONIC_WRITE(SONIC_CDC, 16);
+
+	/*
+	 * load the CAM
+	 */
+	SONIC_WRITE(SONIC_CMD, SONIC_CR_LCAM);
+	sonic_quiesce(dev, SONIC_CR_LCAM);
+
+	/*
+	 * enable receiver, disable loopback
+	 * and enable all interrupts
+	 */
+	SONIC_WRITE(SONIC_RCR, SONIC_RCR_DEFAULT);
+	SONIC_WRITE(SONIC_TCR, SONIC_TCR_DEFAULT);
+	SONIC_WRITE(SONIC_ISR, 0x7fff);
+	SONIC_WRITE(SONIC_IMR, SONIC_IMR_DEFAULT);
+	SONIC_WRITE(SONIC_CMD, SONIC_CR_RXEN);
+
+	netif_dbg(lp, ifup, dev, "%s: new status=%x\n", __func__,
+		  SONIC_READ(SONIC_CMD));
+
+	return 0;
+}
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/ethernet/natsemi/sonic.h b/drivers/net/ethernet/natsemi/sonic.h
new file mode 100644
index 000000000..1df6d2f06
--- /dev/null
+++ b/drivers/net/ethernet/natsemi/sonic.h
@@ -0,0 +1,473 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Header file for sonic.c
+ *
+ * (C) Waldorf Electronics, Germany
+ * Written by Andreas Busse
+ *
+ * NOTE: most of the structure definitions here are endian dependent.
+ * If you want to use this driver on big endian machines, the data
+ * and pad structure members must be exchanged. Also, the structures
+ * need to be changed accordingly to the bus size.
+ *
+ * 981229 MSch:	did just that for the 68k Mac port (32 bit, big endian)
+ *
+ * 990611 David Huggins-Daines <dhd@debian.org>: This machine abstraction
+ * does not cope with 16-bit bus sizes very well.  Therefore I have
+ * rewritten it with ugly macros and evil inlines.
+ *
+ * 050625 Finn Thain: introduced more 32-bit cards and dhd's support
+ *        for 16-bit cards (from the mac68k project).
+ */
+
+#ifndef SONIC_H
+#define SONIC_H
+
+
+/*
+ * SONIC register offsets
+ */
+
+#define SONIC_CMD              0x00
+#define SONIC_DCR              0x01
+#define SONIC_RCR              0x02
+#define SONIC_TCR              0x03
+#define SONIC_IMR              0x04
+#define SONIC_ISR              0x05
+
+#define SONIC_UTDA             0x06
+#define SONIC_CTDA             0x07
+
+#define SONIC_URDA             0x0d
+#define SONIC_CRDA             0x0e
+#define SONIC_EOBC             0x13
+#define SONIC_URRA             0x14
+#define SONIC_RSA              0x15
+#define SONIC_REA              0x16
+#define SONIC_RRP              0x17
+#define SONIC_RWP              0x18
+#define SONIC_RSC              0x2b
+
+#define SONIC_CEP              0x21
+#define SONIC_CAP2             0x22
+#define SONIC_CAP1             0x23
+#define SONIC_CAP0             0x24
+#define SONIC_CE               0x25
+#define SONIC_CDP              0x26
+#define SONIC_CDC              0x27
+
+#define SONIC_WT0              0x29
+#define SONIC_WT1              0x2a
+
+#define SONIC_SR               0x28
+
+
+/* test-only registers */
+
+#define SONIC_TPS		0x08
+#define SONIC_TFC		0x09
+#define SONIC_TSA0		0x0a
+#define SONIC_TSA1		0x0b
+#define SONIC_TFS		0x0c
+
+#define SONIC_CRBA0		0x0f
+#define SONIC_CRBA1		0x10
+#define SONIC_RBWC0		0x11
+#define SONIC_RBWC1		0x12
+#define SONIC_TTDA		0x20
+#define SONIC_MDT		0x2f
+
+#define SONIC_TRBA0		0x19
+#define SONIC_TRBA1		0x1a
+#define SONIC_TBWC0		0x1b
+#define SONIC_TBWC1		0x1c
+#define SONIC_LLFA		0x1f
+
+#define SONIC_ADDR0		0x1d
+#define SONIC_ADDR1		0x1e
+
+/*
+ * Error counters
+ */
+
+#define SONIC_CRCT              0x2c
+#define SONIC_FAET              0x2d
+#define SONIC_MPT               0x2e
+
+#define SONIC_DCR2              0x3f
+
+/*
+ * SONIC command bits
+ */
+
+#define SONIC_CR_LCAM           0x0200
+#define SONIC_CR_RRRA           0x0100
+#define SONIC_CR_RST            0x0080
+#define SONIC_CR_ST             0x0020
+#define SONIC_CR_STP            0x0010
+#define SONIC_CR_RXEN           0x0008
+#define SONIC_CR_RXDIS          0x0004
+#define SONIC_CR_TXP            0x0002
+#define SONIC_CR_HTX            0x0001
+
+#define SONIC_CR_ALL (SONIC_CR_LCAM | SONIC_CR_RRRA | \
+		      SONIC_CR_RXEN | SONIC_CR_TXP)
+
+/*
+ * SONIC data configuration bits
+ */
+
+#define SONIC_DCR_EXBUS         0x8000
+#define SONIC_DCR_LBR           0x2000
+#define SONIC_DCR_PO1           0x1000
+#define SONIC_DCR_PO0           0x0800
+#define SONIC_DCR_SBUS          0x0400
+#define SONIC_DCR_USR1          0x0200
+#define SONIC_DCR_USR0          0x0100
+#define SONIC_DCR_WC1           0x0080
+#define SONIC_DCR_WC0           0x0040
+#define SONIC_DCR_DW            0x0020
+#define SONIC_DCR_BMS           0x0010
+#define SONIC_DCR_RFT1          0x0008
+#define SONIC_DCR_RFT0          0x0004
+#define SONIC_DCR_TFT1          0x0002
+#define SONIC_DCR_TFT0          0x0001
+
+/*
+ * Constants for the SONIC receive control register.
+ */
+
+#define SONIC_RCR_ERR           0x8000
+#define SONIC_RCR_RNT           0x4000
+#define SONIC_RCR_BRD           0x2000
+#define SONIC_RCR_PRO           0x1000
+#define SONIC_RCR_AMC           0x0800
+#define SONIC_RCR_LB1           0x0400
+#define SONIC_RCR_LB0           0x0200
+
+#define SONIC_RCR_MC            0x0100
+#define SONIC_RCR_BC            0x0080
+#define SONIC_RCR_LPKT          0x0040
+#define SONIC_RCR_CRS           0x0020
+#define SONIC_RCR_COL           0x0010
+#define SONIC_RCR_CRCR          0x0008
+#define SONIC_RCR_FAER          0x0004
+#define SONIC_RCR_LBK           0x0002
+#define SONIC_RCR_PRX           0x0001
+
+#define SONIC_RCR_LB_OFF        0
+#define SONIC_RCR_LB_MAC        SONIC_RCR_LB0
+#define SONIC_RCR_LB_ENDEC      SONIC_RCR_LB1
+#define SONIC_RCR_LB_TRANS      (SONIC_RCR_LB0 | SONIC_RCR_LB1)
+
+/* default RCR setup */
+
+#define SONIC_RCR_DEFAULT       (SONIC_RCR_BRD)
+
+
+/*
+ * SONIC Transmit Control register bits
+ */
+
+#define SONIC_TCR_PINTR         0x8000
+#define SONIC_TCR_POWC          0x4000
+#define SONIC_TCR_CRCI          0x2000
+#define SONIC_TCR_EXDIS         0x1000
+#define SONIC_TCR_EXD           0x0400
+#define SONIC_TCR_DEF           0x0200
+#define SONIC_TCR_NCRS          0x0100
+#define SONIC_TCR_CRLS          0x0080
+#define SONIC_TCR_EXC           0x0040
+#define SONIC_TCR_OWC           0x0020
+#define SONIC_TCR_PMB           0x0008
+#define SONIC_TCR_FU            0x0004
+#define SONIC_TCR_BCM           0x0002
+#define SONIC_TCR_PTX           0x0001
+
+#define SONIC_TCR_DEFAULT       0x0000
+
+/*
+ * Constants for the SONIC_INTERRUPT_MASK and
+ * SONIC_INTERRUPT_STATUS registers.
+ */
+
+#define SONIC_INT_BR		0x4000
+#define SONIC_INT_HBL		0x2000
+#define SONIC_INT_LCD		0x1000
+#define SONIC_INT_PINT		0x0800
+#define SONIC_INT_PKTRX		0x0400
+#define SONIC_INT_TXDN		0x0200
+#define SONIC_INT_TXER		0x0100
+#define SONIC_INT_TC		0x0080
+#define SONIC_INT_RDE		0x0040
+#define SONIC_INT_RBE		0x0020
+#define SONIC_INT_RBAE		0x0010
+#define SONIC_INT_CRC		0x0008
+#define SONIC_INT_FAE		0x0004
+#define SONIC_INT_MP		0x0002
+#define SONIC_INT_RFO		0x0001
+
+
+/*
+ * The interrupts we allow.
+ */
+
+#define SONIC_IMR_DEFAULT     ( SONIC_INT_BR | \
+                                SONIC_INT_LCD | \
+                                SONIC_INT_RFO | \
+                                SONIC_INT_PKTRX | \
+                                SONIC_INT_TXDN | \
+                                SONIC_INT_TXER | \
+                                SONIC_INT_RDE | \
+                                SONIC_INT_RBAE | \
+                                SONIC_INT_CRC | \
+                                SONIC_INT_FAE | \
+                                SONIC_INT_MP)
+
+
+#define SONIC_EOL       0x0001
+#define CAM_DESCRIPTORS 16
+
+/* Offsets in the various DMA buffers accessed by the SONIC */
+
+#define SONIC_BITMODE16 0
+#define SONIC_BITMODE32 1
+#define SONIC_BUS_SCALE(bitmode) ((bitmode) ? 4 : 2)
+/* Note!  These are all measured in bus-size units, so use SONIC_BUS_SCALE */
+#define SIZEOF_SONIC_RR 4
+#define SONIC_RR_BUFADR_L  0
+#define SONIC_RR_BUFADR_H  1
+#define SONIC_RR_BUFSIZE_L 2
+#define SONIC_RR_BUFSIZE_H 3
+
+#define SIZEOF_SONIC_RD 7
+#define SONIC_RD_STATUS   0
+#define SONIC_RD_PKTLEN   1
+#define SONIC_RD_PKTPTR_L 2
+#define SONIC_RD_PKTPTR_H 3
+#define SONIC_RD_SEQNO    4
+#define SONIC_RD_LINK     5
+#define SONIC_RD_IN_USE   6
+
+#define SIZEOF_SONIC_TD 8
+#define SONIC_TD_STATUS       0
+#define SONIC_TD_CONFIG       1
+#define SONIC_TD_PKTSIZE      2
+#define SONIC_TD_FRAG_COUNT   3
+#define SONIC_TD_FRAG_PTR_L   4
+#define SONIC_TD_FRAG_PTR_H   5
+#define SONIC_TD_FRAG_SIZE    6
+#define SONIC_TD_LINK         7
+
+#define SIZEOF_SONIC_CD 4
+#define SONIC_CD_ENTRY_POINTER 0
+#define SONIC_CD_CAP0          1
+#define SONIC_CD_CAP1          2
+#define SONIC_CD_CAP2          3
+
+#define SIZEOF_SONIC_CDA ((CAM_DESCRIPTORS * SIZEOF_SONIC_CD) + 1)
+#define SONIC_CDA_CAM_ENABLE   (CAM_DESCRIPTORS * SIZEOF_SONIC_CD)
+
+/*
+ * Some tunables for the buffer areas. Power of 2 is required
+ * the current driver uses one receive buffer for each descriptor.
+ *
+ * MSch: use more buffer space for the slow m68k Macs!
+ */
+#define SONIC_NUM_RRS   16            /* number of receive resources */
+#define SONIC_NUM_RDS   SONIC_NUM_RRS /* number of receive descriptors */
+#define SONIC_NUM_TDS   16            /* number of transmit descriptors */
+
+#define SONIC_RRS_MASK  (SONIC_NUM_RRS - 1)
+#define SONIC_RDS_MASK  (SONIC_NUM_RDS - 1)
+#define SONIC_TDS_MASK  (SONIC_NUM_TDS - 1)
+
+#define SONIC_RBSIZE	1520          /* size of one resource buffer */
+
+/* Again, measured in bus size units! */
+#define SIZEOF_SONIC_DESC (SIZEOF_SONIC_CDA	\
+	+ (SIZEOF_SONIC_TD * SONIC_NUM_TDS)	\
+	+ (SIZEOF_SONIC_RD * SONIC_NUM_RDS)	\
+	+ (SIZEOF_SONIC_RR * SONIC_NUM_RRS))
+
+/* Information that need to be kept for each board. */
+struct sonic_local {
+	/* Bus size.  0 == 16 bits, 1 == 32 bits. */
+	int dma_bitmode;
+	/* Register offset within the longword (independent of endianness,
+	   and varies from one type of Macintosh SONIC to another
+	   (Aarrgh)) */
+	int reg_offset;
+	void *descriptors;
+	/* Crud.  These areas have to be within the same 64K.  Therefore
+       we allocate a desriptors page, and point these to places within it. */
+	void *cda;  /* CAM descriptor area */
+	void *tda;  /* Transmit descriptor area */
+	void *rra;  /* Receive resource area */
+	void *rda;  /* Receive descriptor area */
+	struct sk_buff* volatile rx_skb[SONIC_NUM_RRS];	/* packets to be received */
+	struct sk_buff* volatile tx_skb[SONIC_NUM_TDS];	/* packets to be transmitted */
+	unsigned int tx_len[SONIC_NUM_TDS]; /* lengths of tx DMA mappings */
+	/* Logical DMA addresses on MIPS, bus addresses on m68k
+	 * (so "laddr" is a bit misleading) */
+	dma_addr_t descriptors_laddr;
+	u32 cda_laddr;              /* logical DMA address of CDA */
+	u32 tda_laddr;              /* logical DMA address of TDA */
+	u32 rra_laddr;              /* logical DMA address of RRA */
+	u32 rda_laddr;              /* logical DMA address of RDA */
+	dma_addr_t rx_laddr[SONIC_NUM_RRS]; /* logical DMA addresses of rx skbuffs */
+	dma_addr_t tx_laddr[SONIC_NUM_TDS]; /* logical DMA addresses of tx skbuffs */
+	unsigned int cur_rx;
+	unsigned int cur_tx;           /* first unacked transmit packet */
+	unsigned int eol_rx;
+	unsigned int eol_tx;           /* last unacked transmit packet */
+	unsigned int next_tx;          /* next free TD */
+	int msg_enable;
+	struct device *device;         /* generic device */
+	struct net_device_stats stats;
+	spinlock_t lock;
+};
+
+#define TX_TIMEOUT (3 * HZ)
+
+/* Index to functions, as function prototypes. */
+
+static int sonic_open(struct net_device *dev);
+static int sonic_send_packet(struct sk_buff *skb, struct net_device *dev);
+static irqreturn_t sonic_interrupt(int irq, void *dev_id);
+static void sonic_rx(struct net_device *dev);
+static int sonic_close(struct net_device *dev);
+static struct net_device_stats *sonic_get_stats(struct net_device *dev);
+static void sonic_multicast_list(struct net_device *dev);
+static int sonic_init(struct net_device *dev);
+static void sonic_tx_timeout(struct net_device *dev);
+static void sonic_msg_init(struct net_device *dev);
+
+/* Internal inlines for reading/writing DMA buffers.  Note that bus
+   size and endianness matter here, whereas they don't for registers,
+   as far as we can tell. */
+/* OpenBSD calls this "SWO".  I'd like to think that sonic_buf_put()
+   is a much better name. */
+static inline void sonic_buf_put(u16 *base, int bitmode,
+				 int offset, __u16 val)
+{
+	if (bitmode)
+#ifdef __BIG_ENDIAN
+		__raw_writew(val, base + (offset * 2) + 1);
+#else
+		__raw_writew(val, base + (offset * 2) + 0);
+#endif
+	else
+		__raw_writew(val, base + (offset * 1) + 0);
+}
+
+static inline __u16 sonic_buf_get(u16 *base, int bitmode,
+				  int offset)
+{
+	if (bitmode)
+#ifdef __BIG_ENDIAN
+		return __raw_readw(base + (offset * 2) + 1);
+#else
+		return __raw_readw(base + (offset * 2) + 0);
+#endif
+	else
+		return __raw_readw(base + (offset * 1) + 0);
+}
+
+/* Inlines that you should actually use for reading/writing DMA buffers */
+static inline void sonic_cda_put(struct net_device* dev, int entry,
+				 int offset, __u16 val)
+{
+	struct sonic_local *lp = netdev_priv(dev);
+	sonic_buf_put(lp->cda, lp->dma_bitmode,
+		      (entry * SIZEOF_SONIC_CD) + offset, val);
+}
+
+static inline __u16 sonic_cda_get(struct net_device* dev, int entry,
+				  int offset)
+{
+	struct sonic_local *lp = netdev_priv(dev);
+	return sonic_buf_get(lp->cda, lp->dma_bitmode,
+			     (entry * SIZEOF_SONIC_CD) + offset);
+}
+
+static inline void sonic_set_cam_enable(struct net_device* dev, __u16 val)
+{
+	struct sonic_local *lp = netdev_priv(dev);
+	sonic_buf_put(lp->cda, lp->dma_bitmode, SONIC_CDA_CAM_ENABLE, val);
+}
+
+static inline __u16 sonic_get_cam_enable(struct net_device* dev)
+{
+	struct sonic_local *lp = netdev_priv(dev);
+	return sonic_buf_get(lp->cda, lp->dma_bitmode, SONIC_CDA_CAM_ENABLE);
+}
+
+static inline void sonic_tda_put(struct net_device* dev, int entry,
+				 int offset, __u16 val)
+{
+	struct sonic_local *lp = netdev_priv(dev);
+	sonic_buf_put(lp->tda, lp->dma_bitmode,
+		      (entry * SIZEOF_SONIC_TD) + offset, val);
+}
+
+static inline __u16 sonic_tda_get(struct net_device* dev, int entry,
+				  int offset)
+{
+	struct sonic_local *lp = netdev_priv(dev);
+	return sonic_buf_get(lp->tda, lp->dma_bitmode,
+			     (entry * SIZEOF_SONIC_TD) + offset);
+}
+
+static inline void sonic_rda_put(struct net_device* dev, int entry,
+				 int offset, __u16 val)
+{
+	struct sonic_local *lp = netdev_priv(dev);
+	sonic_buf_put(lp->rda, lp->dma_bitmode,
+		      (entry * SIZEOF_SONIC_RD) + offset, val);
+}
+
+static inline __u16 sonic_rda_get(struct net_device* dev, int entry,
+				  int offset)
+{
+	struct sonic_local *lp = netdev_priv(dev);
+	return sonic_buf_get(lp->rda, lp->dma_bitmode,
+			     (entry * SIZEOF_SONIC_RD) + offset);
+}
+
+static inline void sonic_rra_put(struct net_device* dev, int entry,
+				 int offset, __u16 val)
+{
+	struct sonic_local *lp = netdev_priv(dev);
+	sonic_buf_put(lp->rra, lp->dma_bitmode,
+		      (entry * SIZEOF_SONIC_RR) + offset, val);
+}
+
+static inline __u16 sonic_rra_get(struct net_device* dev, int entry,
+				  int offset)
+{
+	struct sonic_local *lp = netdev_priv(dev);
+	return sonic_buf_get(lp->rra, lp->dma_bitmode,
+			     (entry * SIZEOF_SONIC_RR) + offset);
+}
+
+static inline u16 sonic_rr_addr(struct net_device *dev, int entry)
+{
+	struct sonic_local *lp = netdev_priv(dev);
+
+	return lp->rra_laddr +
+	       entry * SIZEOF_SONIC_RR * SONIC_BUS_SCALE(lp->dma_bitmode);
+}
+
+static inline u16 sonic_rr_entry(struct net_device *dev, u16 addr)
+{
+	struct sonic_local *lp = netdev_priv(dev);
+
+	return (addr - (u16)lp->rra_laddr) / (SIZEOF_SONIC_RR *
+					      SONIC_BUS_SCALE(lp->dma_bitmode));
+}
+
+static const char version[] =
+    "sonic.c:v0.92 20.9.98 tsbogend@alpha.franken.de\n";
+
+#endif /* SONIC_H */
diff --git a/drivers/net/ethernet/natsemi/xtsonic.c b/drivers/net/ethernet/natsemi/xtsonic.c
new file mode 100644
index 000000000..511786473
--- /dev/null
+++ b/drivers/net/ethernet/natsemi/xtsonic.c
@@ -0,0 +1,310 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * xtsonic.c
+ *
+ * (C) 2001 - 2007 Tensilica Inc.
+ *	Kevin Chea <kchea@yahoo.com>
+ *	Marc Gauthier <marc@linux-xtensa.org>
+ *	Chris Zankel <chris@zankel.net>
+ *
+ * (C) 1996,1998 by Thomas Bogendoerfer (tsbogend@alpha.franken.de)
+ *
+ * This driver is based on work from Andreas Busse, but most of
+ * the code is rewritten.
+ *
+ * (C) 1995 by Andreas Busse (andy@waldorf-gmbh.de)
+ *
+ * A driver for the onboard Sonic ethernet controller on the XT2000.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/gfp.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/in.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/dma.h>
+
+static char xtsonic_string[] = "xtsonic";
+
+extern unsigned xtboard_nvram_valid(void);
+extern void xtboard_get_ether_addr(unsigned char *buf);
+
+#include "sonic.h"
+
+/*
+ * According to the documentation for the Sonic ethernet controller,
+ * EOBC should be 760 words (1520 bytes) for 32-bit applications, and,
+ * as such, 2 words less than the buffer size. The value for RBSIZE
+ * defined in sonic.h, however is only 1520.
+ *
+ * (Note that in 16-bit configurations, EOBC is 759 words (1518 bytes) and
+ * RBSIZE 1520 bytes)
+ */
+#undef SONIC_RBSIZE
+#define SONIC_RBSIZE	1524
+
+/*
+ * The chip provides 256 byte register space.
+ */
+#define SONIC_MEM_SIZE	0x100
+
+/*
+ * Macros to access SONIC registers
+ */
+#define SONIC_READ(reg) \
+	(0xffff & *((volatile unsigned int *)dev->base_addr+reg))
+
+#define SONIC_WRITE(reg,val) \
+	*((volatile unsigned int *)dev->base_addr+reg) = val
+
+/*
+ * We cannot use station (ethernet) address prefixes to detect the
+ * sonic controller since these are board manufacturer depended.
+ * So we check for known Silicon Revision IDs instead.
+ */
+static unsigned short known_revisions[] =
+{
+	0x101,			/* SONIC 83934 */
+	0xffff			/* end of list */
+};
+
+static int xtsonic_open(struct net_device *dev)
+{
+	int retval;
+
+	retval = request_irq(dev->irq, sonic_interrupt, 0, "sonic", dev);
+	if (retval) {
+		printk(KERN_ERR "%s: unable to get IRQ %d.\n",
+		       dev->name, dev->irq);
+		return -EAGAIN;
+	}
+
+	retval = sonic_open(dev);
+	if (retval)
+		free_irq(dev->irq, dev);
+	return retval;
+}
+
+static int xtsonic_close(struct net_device *dev)
+{
+	int err;
+	err = sonic_close(dev);
+	free_irq(dev->irq, dev);
+	return err;
+}
+
+static const struct net_device_ops xtsonic_netdev_ops = {
+	.ndo_open		= xtsonic_open,
+	.ndo_stop		= xtsonic_close,
+	.ndo_start_xmit		= sonic_send_packet,
+	.ndo_get_stats		= sonic_get_stats,
+	.ndo_set_rx_mode	= sonic_multicast_list,
+	.ndo_tx_timeout		= sonic_tx_timeout,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address	= eth_mac_addr,
+};
+
+static int sonic_probe1(struct net_device *dev)
+{
+	unsigned int silicon_revision;
+	struct sonic_local *lp = netdev_priv(dev);
+	unsigned int base_addr = dev->base_addr;
+	int i;
+	int err = 0;
+
+	if (!request_mem_region(base_addr, 0x100, xtsonic_string))
+		return -EBUSY;
+
+	/*
+	 * get the Silicon Revision ID. If this is one of the known
+	 * one assume that we found a SONIC ethernet controller at
+	 * the expected location.
+	 */
+	silicon_revision = SONIC_READ(SONIC_SR);
+	i = 0;
+	while ((known_revisions[i] != 0xffff) &&
+			(known_revisions[i] != silicon_revision))
+		i++;
+
+	if (known_revisions[i] == 0xffff) {
+		pr_info("SONIC ethernet controller not found (0x%4x)\n",
+			silicon_revision);
+		return -ENODEV;
+	}
+
+	/*
+	 * Put the sonic into software reset, then retrieve ethernet address.
+	 * Note: we are assuming that the boot-loader has initialized the cam.
+	 */
+	SONIC_WRITE(SONIC_CMD,SONIC_CR_RST);
+	SONIC_WRITE(SONIC_DCR,
+		    SONIC_DCR_WC0|SONIC_DCR_DW|SONIC_DCR_LBR|SONIC_DCR_SBUS);
+	SONIC_WRITE(SONIC_CEP,0);
+	SONIC_WRITE(SONIC_IMR,0);
+
+	SONIC_WRITE(SONIC_CMD,SONIC_CR_RST);
+	SONIC_WRITE(SONIC_CEP,0);
+
+	for (i=0; i<3; i++) {
+		unsigned int val = SONIC_READ(SONIC_CAP0-i);
+		dev->dev_addr[i*2] = val;
+		dev->dev_addr[i*2+1] = val >> 8;
+	}
+
+	/* Initialize the device structure. */
+
+	lp->dma_bitmode = SONIC_BITMODE32;
+
+	/*
+	 *  Allocate local private descriptor areas in uncached space.
+	 *  The entire structure must be located within the same 64kb segment.
+	 *  A simple way to ensure this is to allocate twice the
+	 *  size of the structure -- given that the structure is
+	 *  much less than 64 kB, at least one of the halves of
+	 *  the allocated area will be contained entirely in 64 kB.
+	 *  We also allocate extra space for a pointer to allow freeing
+	 *  this structure later on (in xtsonic_cleanup_module()).
+	 */
+	lp->descriptors = dma_alloc_coherent(lp->device,
+					     SIZEOF_SONIC_DESC *
+					     SONIC_BUS_SCALE(lp->dma_bitmode),
+					     &lp->descriptors_laddr,
+					     GFP_KERNEL);
+	if (lp->descriptors == NULL) {
+		err = -ENOMEM;
+		goto out;
+	}
+
+	lp->cda = lp->descriptors;
+	lp->tda = lp->cda + (SIZEOF_SONIC_CDA
+			     * SONIC_BUS_SCALE(lp->dma_bitmode));
+	lp->rda = lp->tda + (SIZEOF_SONIC_TD * SONIC_NUM_TDS
+			     * SONIC_BUS_SCALE(lp->dma_bitmode));
+	lp->rra = lp->rda + (SIZEOF_SONIC_RD * SONIC_NUM_RDS
+			     * SONIC_BUS_SCALE(lp->dma_bitmode));
+
+	/* get the virtual dma address */
+
+	lp->cda_laddr = lp->descriptors_laddr;
+	lp->tda_laddr = lp->cda_laddr + (SIZEOF_SONIC_CDA
+				         * SONIC_BUS_SCALE(lp->dma_bitmode));
+	lp->rda_laddr = lp->tda_laddr + (SIZEOF_SONIC_TD * SONIC_NUM_TDS
+					 * SONIC_BUS_SCALE(lp->dma_bitmode));
+	lp->rra_laddr = lp->rda_laddr + (SIZEOF_SONIC_RD * SONIC_NUM_RDS
+					 * SONIC_BUS_SCALE(lp->dma_bitmode));
+
+	dev->netdev_ops		= &xtsonic_netdev_ops;
+	dev->watchdog_timeo	= TX_TIMEOUT;
+
+	/*
+	 * clear tally counter
+	 */
+	SONIC_WRITE(SONIC_CRCT,0xffff);
+	SONIC_WRITE(SONIC_FAET,0xffff);
+	SONIC_WRITE(SONIC_MPT,0xffff);
+
+	return 0;
+out:
+	release_region(dev->base_addr, SONIC_MEM_SIZE);
+	return err;
+}
+
+
+/*
+ * Probe for a SONIC ethernet controller on an XT2000 board.
+ * Actually probing is superfluous but we're paranoid.
+ */
+
+int xtsonic_probe(struct platform_device *pdev)
+{
+	struct net_device *dev;
+	struct sonic_local *lp;
+	struct resource *resmem, *resirq;
+	int err = 0;
+
+	if ((resmem = platform_get_resource(pdev, IORESOURCE_MEM, 0)) == NULL)
+		return -ENODEV;
+
+	if ((resirq = platform_get_resource(pdev, IORESOURCE_IRQ, 0)) == NULL)
+		return -ENODEV;
+
+	if ((dev = alloc_etherdev(sizeof(struct sonic_local))) == NULL)
+		return -ENOMEM;
+
+	lp = netdev_priv(dev);
+	lp->device = &pdev->dev;
+	platform_set_drvdata(pdev, dev);
+	SET_NETDEV_DEV(dev, &pdev->dev);
+	netdev_boot_setup_check(dev);
+
+	dev->base_addr = resmem->start;
+	dev->irq = resirq->start;
+
+	if ((err = sonic_probe1(dev)))
+		goto out;
+
+	pr_info("SONIC ethernet @%08lx, MAC %pM, IRQ %d\n",
+		dev->base_addr, dev->dev_addr, dev->irq);
+
+	sonic_msg_init(dev);
+
+	if ((err = register_netdev(dev)))
+		goto undo_probe1;
+
+	return 0;
+
+undo_probe1:
+	dma_free_coherent(lp->device,
+			  SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode),
+			  lp->descriptors, lp->descriptors_laddr);
+	release_region(dev->base_addr, SONIC_MEM_SIZE);
+out:
+	free_netdev(dev);
+
+	return err;
+}
+
+MODULE_DESCRIPTION("Xtensa XT2000 SONIC ethernet driver");
+
+#include "sonic.c"
+
+static int xtsonic_device_remove(struct platform_device *pdev)
+{
+	struct net_device *dev = platform_get_drvdata(pdev);
+	struct sonic_local *lp = netdev_priv(dev);
+
+	unregister_netdev(dev);
+	dma_free_coherent(lp->device,
+			  SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode),
+			  lp->descriptors, lp->descriptors_laddr);
+	release_region (dev->base_addr, SONIC_MEM_SIZE);
+	free_netdev(dev);
+
+	return 0;
+}
+
+static struct platform_driver xtsonic_driver = {
+	.probe = xtsonic_probe,
+	.remove = xtsonic_device_remove,
+	.driver = {
+		.name = xtsonic_string,
+	},
+};
+
+module_platform_driver(xtsonic_driver);