Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 454 insertions, 0 deletions

diff --git a/drivers/net/wireless/ath/ath9k/ar9002_hw.c b/drivers/net/wireless/ath/ath9k/ar9002_hw.c
new file mode 100644
index 000000000..ae68f6748
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/ar9002_hw.c
@@ -0,0 +1,454 @@
+/*
+ * Copyright (c) 2008-2011 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/moduleparam.h>
+#include "hw.h"
+#include "ar5008_initvals.h"
+#include "ar9001_initvals.h"
+#include "ar9002_initvals.h"
+#include "ar9002_phy.h"
+
+/* General hardware code for the A5008/AR9001/AR9002 hadware families */
+
+static int ar9002_hw_init_mode_regs(struct ath_hw *ah)
+{
+	if (AR_SREV_9271(ah)) {
+		INIT_INI_ARRAY(&ah->iniModes, ar9271Modes_9271);
+		INIT_INI_ARRAY(&ah->iniCommon, ar9271Common_9271);
+		INIT_INI_ARRAY(&ah->iniModes_9271_ANI_reg, ar9271Modes_9271_ANI_reg);
+		return 0;
+	}
+
+	INIT_INI_ARRAY(&ah->iniPcieSerdes,
+		       ar9280PciePhy_clkreq_always_on_L1_9280);
+
+	if (AR_SREV_9287_11_OR_LATER(ah)) {
+		INIT_INI_ARRAY(&ah->iniModes, ar9287Modes_9287_1_1);
+		INIT_INI_ARRAY(&ah->iniCommon, ar9287Common_9287_1_1);
+	} else if (AR_SREV_9285_12_OR_LATER(ah)) {
+		INIT_INI_ARRAY(&ah->iniModes, ar9285Modes_9285_1_2);
+		INIT_INI_ARRAY(&ah->iniCommon, ar9285Common_9285_1_2);
+	} else if (AR_SREV_9280_20_OR_LATER(ah)) {
+		INIT_INI_ARRAY(&ah->iniModes, ar9280Modes_9280_2);
+		INIT_INI_ARRAY(&ah->iniCommon, ar9280Common_9280_2);
+
+		INIT_INI_ARRAY(&ah->iniModesFastClock,
+			       ar9280Modes_fast_clock_9280_2);
+	} else if (AR_SREV_9160_10_OR_LATER(ah)) {
+		INIT_INI_ARRAY(&ah->iniModes, ar5416Modes_9160);
+		INIT_INI_ARRAY(&ah->iniCommon, ar5416Common_9160);
+		if (AR_SREV_9160_11(ah)) {
+			INIT_INI_ARRAY(&ah->iniAddac,
+				       ar5416Addac_9160_1_1);
+		} else {
+			INIT_INI_ARRAY(&ah->iniAddac, ar5416Addac_9160);
+		}
+	} else if (AR_SREV_9100_OR_LATER(ah)) {
+		INIT_INI_ARRAY(&ah->iniModes, ar5416Modes_9100);
+		INIT_INI_ARRAY(&ah->iniCommon, ar5416Common_9100);
+		INIT_INI_ARRAY(&ah->iniAddac, ar5416Addac_9100);
+	} else {
+		INIT_INI_ARRAY(&ah->iniModes, ar5416Modes);
+		INIT_INI_ARRAY(&ah->iniCommon, ar5416Common);
+		INIT_INI_ARRAY(&ah->iniAddac, ar5416Addac);
+	}
+
+	if (!AR_SREV_9280_20_OR_LATER(ah)) {
+		/* Common for AR5416, AR913x, AR9160 */
+		INIT_INI_ARRAY(&ah->iniBB_RfGain, ar5416BB_RfGain);
+
+		/* Common for AR913x, AR9160 */
+		if (!AR_SREV_5416(ah))
+			INIT_INI_ARRAY(&ah->iniBank6, ar5416Bank6TPC_9100);
+		else
+			INIT_INI_ARRAY(&ah->iniBank6, ar5416Bank6TPC);
+	}
+
+	/* iniAddac needs to be modified for these chips */
+	if (AR_SREV_9160(ah) || !AR_SREV_5416_22_OR_LATER(ah)) {
+		struct ar5416IniArray *addac = &ah->iniAddac;
+		u32 size = sizeof(u32) * addac->ia_rows * addac->ia_columns;
+		u32 *data;
+
+		data = devm_kzalloc(ah->dev, size, GFP_KERNEL);
+		if (!data)
+			return -ENOMEM;
+
+		memcpy(data, addac->ia_array, size);
+		addac->ia_array = data;
+
+		if (!AR_SREV_5416_22_OR_LATER(ah)) {
+			/* override CLKDRV value */
+			INI_RA(addac, 31,1) = 0;
+		}
+	}
+	if (AR_SREV_9287_11_OR_LATER(ah)) {
+		INIT_INI_ARRAY(&ah->iniCckfirNormal,
+		       ar9287Common_normal_cck_fir_coeff_9287_1_1);
+		INIT_INI_ARRAY(&ah->iniCckfirJapan2484,
+		       ar9287Common_japan_2484_cck_fir_coeff_9287_1_1);
+	}
+	return 0;
+}
+
+static void ar9280_20_hw_init_rxgain_ini(struct ath_hw *ah)
+{
+	u32 rxgain_type;
+
+	if (ah->eep_ops->get_eeprom_rev(ah) >= AR5416_EEP_MINOR_VER_17) {
+		rxgain_type = ah->eep_ops->get_eeprom(ah, EEP_RXGAIN_TYPE);
+
+		if (rxgain_type == AR5416_EEP_RXGAIN_13DB_BACKOFF)
+			INIT_INI_ARRAY(&ah->iniModesRxGain,
+				       ar9280Modes_backoff_13db_rxgain_9280_2);
+		else if (rxgain_type == AR5416_EEP_RXGAIN_23DB_BACKOFF)
+			INIT_INI_ARRAY(&ah->iniModesRxGain,
+				       ar9280Modes_backoff_23db_rxgain_9280_2);
+		else
+			INIT_INI_ARRAY(&ah->iniModesRxGain,
+				       ar9280Modes_original_rxgain_9280_2);
+	} else {
+		INIT_INI_ARRAY(&ah->iniModesRxGain,
+			       ar9280Modes_original_rxgain_9280_2);
+	}
+}
+
+static void ar9280_20_hw_init_txgain_ini(struct ath_hw *ah, u32 txgain_type)
+{
+	if (ah->eep_ops->get_eeprom_rev(ah) >= AR5416_EEP_MINOR_VER_19) {
+		if (txgain_type == AR5416_EEP_TXGAIN_HIGH_POWER)
+			INIT_INI_ARRAY(&ah->iniModesTxGain,
+				       ar9280Modes_high_power_tx_gain_9280_2);
+		else
+			INIT_INI_ARRAY(&ah->iniModesTxGain,
+				       ar9280Modes_original_tx_gain_9280_2);
+	} else {
+		INIT_INI_ARRAY(&ah->iniModesTxGain,
+			       ar9280Modes_original_tx_gain_9280_2);
+	}
+}
+
+static void ar9271_hw_init_txgain_ini(struct ath_hw *ah, u32 txgain_type)
+{
+	if (txgain_type == AR5416_EEP_TXGAIN_HIGH_POWER)
+		INIT_INI_ARRAY(&ah->iniModesTxGain,
+			       ar9271Modes_high_power_tx_gain_9271);
+	else
+		INIT_INI_ARRAY(&ah->iniModesTxGain,
+			       ar9271Modes_normal_power_tx_gain_9271);
+}
+
+static void ar9002_hw_init_mode_gain_regs(struct ath_hw *ah)
+{
+	u32 txgain_type = ah->eep_ops->get_eeprom(ah, EEP_TXGAIN_TYPE);
+
+	if (AR_SREV_9287_11_OR_LATER(ah))
+		INIT_INI_ARRAY(&ah->iniModesRxGain,
+			       ar9287Modes_rx_gain_9287_1_1);
+	else if (AR_SREV_9280_20(ah))
+		ar9280_20_hw_init_rxgain_ini(ah);
+
+	if (AR_SREV_9271(ah)) {
+		ar9271_hw_init_txgain_ini(ah, txgain_type);
+	} else if (AR_SREV_9287_11_OR_LATER(ah)) {
+		INIT_INI_ARRAY(&ah->iniModesTxGain,
+			       ar9287Modes_tx_gain_9287_1_1);
+	} else if (AR_SREV_9280_20(ah)) {
+		ar9280_20_hw_init_txgain_ini(ah, txgain_type);
+	} else if (AR_SREV_9285_12_OR_LATER(ah)) {
+		/* txgain table */
+		if (txgain_type == AR5416_EEP_TXGAIN_HIGH_POWER) {
+			if (AR_SREV_9285E_20(ah)) {
+				INIT_INI_ARRAY(&ah->iniModesTxGain,
+					       ar9285Modes_XE2_0_high_power);
+			} else {
+				INIT_INI_ARRAY(&ah->iniModesTxGain,
+					ar9285Modes_high_power_tx_gain_9285_1_2);
+			}
+		} else {
+			if (AR_SREV_9285E_20(ah)) {
+				INIT_INI_ARRAY(&ah->iniModesTxGain,
+					       ar9285Modes_XE2_0_normal_power);
+			} else {
+				INIT_INI_ARRAY(&ah->iniModesTxGain,
+					ar9285Modes_original_tx_gain_9285_1_2);
+			}
+		}
+	}
+}
+
+/*
+ * Helper for ASPM support.
+ *
+ * Disable PLL when in L0s as well as receiver clock when in L1.
+ * This power saving option must be enabled through the SerDes.
+ *
+ * Programming the SerDes must go through the same 288 bit serial shift
+ * register as the other analog registers.  Hence the 9 writes.
+ */
+static void ar9002_hw_configpcipowersave(struct ath_hw *ah,
+					 bool power_off)
+{
+	u8 i;
+	u32 val;
+
+	/* Nothing to do on restore for 11N */
+	if (!power_off /* !restore */) {
+		if (AR_SREV_9280_20_OR_LATER(ah)) {
+			/*
+			 * AR9280 2.0 or later chips use SerDes values from the
+			 * initvals.h initialized depending on chipset during
+			 * __ath9k_hw_init()
+			 */
+			for (i = 0; i < ah->iniPcieSerdes.ia_rows; i++) {
+				REG_WRITE(ah, INI_RA(&ah->iniPcieSerdes, i, 0),
+					  INI_RA(&ah->iniPcieSerdes, i, 1));
+			}
+		} else {
+			ENABLE_REGWRITE_BUFFER(ah);
+
+			REG_WRITE(ah, AR_PCIE_SERDES, 0x9248fc00);
+			REG_WRITE(ah, AR_PCIE_SERDES, 0x24924924);
+
+			/* RX shut off when elecidle is asserted */
+			REG_WRITE(ah, AR_PCIE_SERDES, 0x28000039);
+			REG_WRITE(ah, AR_PCIE_SERDES, 0x53160824);
+			REG_WRITE(ah, AR_PCIE_SERDES, 0xe5980579);
+
+			/*
+			 * Ignore ah->ah_config.pcie_clock_req setting for
+			 * pre-AR9280 11n
+			 */
+			REG_WRITE(ah, AR_PCIE_SERDES, 0x001defff);
+
+			REG_WRITE(ah, AR_PCIE_SERDES, 0x1aaabe40);
+			REG_WRITE(ah, AR_PCIE_SERDES, 0xbe105554);
+			REG_WRITE(ah, AR_PCIE_SERDES, 0x000e3007);
+
+			/* Load the new settings */
+			REG_WRITE(ah, AR_PCIE_SERDES2, 0x00000000);
+
+			REGWRITE_BUFFER_FLUSH(ah);
+		}
+
+		udelay(1000);
+	}
+
+	if (power_off) {
+		/* clear bit 19 to disable L1 */
+		REG_CLR_BIT(ah, AR_PCIE_PM_CTRL, AR_PCIE_PM_CTRL_ENA);
+
+		val = REG_READ(ah, AR_WA);
+
+		/*
+		 * Set PCIe workaround bits
+		 * In AR9280 and AR9285, bit 14 in WA register (disable L1)
+		 * should only  be set when device enters D3 and be
+		 * cleared when device comes back to D0.
+		 */
+		if (ah->config.pcie_waen) {
+			if (ah->config.pcie_waen & AR_WA_D3_L1_DISABLE)
+				val |= AR_WA_D3_L1_DISABLE;
+		} else {
+			if (AR_SREV_9285(ah) || AR_SREV_9271(ah) || AR_SREV_9287(ah)) {
+				if (AR9285_WA_DEFAULT & AR_WA_D3_L1_DISABLE)
+					val |= AR_WA_D3_L1_DISABLE;
+			} else if (AR_SREV_9280(ah)) {
+				if (AR9280_WA_DEFAULT & AR_WA_D3_L1_DISABLE)
+					val |= AR_WA_D3_L1_DISABLE;
+			}
+		}
+
+		if (AR_SREV_9280(ah) || AR_SREV_9285(ah) || AR_SREV_9287(ah)) {
+			/*
+			 * Disable bit 6 and 7 before entering D3 to
+			 * prevent system hang.
+			 */
+			val &= ~(AR_WA_BIT6 | AR_WA_BIT7);
+		}
+
+		if (AR_SREV_9280(ah))
+			val |= AR_WA_BIT22;
+
+		if (AR_SREV_9285E_20(ah))
+			val |= AR_WA_BIT23;
+
+		REG_WRITE(ah, AR_WA, val);
+	} else {
+		if (ah->config.pcie_waen) {
+			val = ah->config.pcie_waen;
+			val &= (~AR_WA_D3_L1_DISABLE);
+		} else {
+			if (AR_SREV_9285(ah) || AR_SREV_9271(ah) || AR_SREV_9287(ah)) {
+				val = AR9285_WA_DEFAULT;
+				val &= (~AR_WA_D3_L1_DISABLE);
+			} else if (AR_SREV_9280(ah)) {
+				/*
+				 * For AR9280 chips, bit 22 of 0x4004
+				 * needs to be set.
+				 */
+				val = AR9280_WA_DEFAULT;
+				val &= (~AR_WA_D3_L1_DISABLE);
+			} else {
+				val = AR_WA_DEFAULT;
+			}
+		}
+
+		/* WAR for ASPM system hang */
+		if (AR_SREV_9285(ah) || AR_SREV_9287(ah))
+			val |= (AR_WA_BIT6 | AR_WA_BIT7);
+
+		if (AR_SREV_9285E_20(ah))
+			val |= AR_WA_BIT23;
+
+		REG_WRITE(ah, AR_WA, val);
+
+		/* set bit 19 to allow forcing of pcie core into L1 state */
+		REG_SET_BIT(ah, AR_PCIE_PM_CTRL, AR_PCIE_PM_CTRL_ENA);
+	}
+}
+
+static int ar9002_hw_get_radiorev(struct ath_hw *ah)
+{
+	u32 val;
+	int i;
+
+	ENABLE_REGWRITE_BUFFER(ah);
+
+	REG_WRITE(ah, AR_PHY(0x36), 0x00007058);
+	for (i = 0; i < 8; i++)
+		REG_WRITE(ah, AR_PHY(0x20), 0x00010000);
+
+	REGWRITE_BUFFER_FLUSH(ah);
+
+	val = (REG_READ(ah, AR_PHY(256)) >> 24) & 0xff;
+	val = ((val & 0xf0) >> 4) | ((val & 0x0f) << 4);
+
+	return ath9k_hw_reverse_bits(val, 8);
+}
+
+int ar9002_hw_rf_claim(struct ath_hw *ah)
+{
+	u32 val;
+
+	REG_WRITE(ah, AR_PHY(0), 0x00000007);
+
+	val = ar9002_hw_get_radiorev(ah);
+	switch (val & AR_RADIO_SREV_MAJOR) {
+	case 0:
+		val = AR_RAD5133_SREV_MAJOR;
+		break;
+	case AR_RAD5133_SREV_MAJOR:
+	case AR_RAD5122_SREV_MAJOR:
+	case AR_RAD2133_SREV_MAJOR:
+	case AR_RAD2122_SREV_MAJOR:
+		break;
+	default:
+		ath_err(ath9k_hw_common(ah),
+			"Radio Chip Rev 0x%02X not supported\n",
+			val & AR_RADIO_SREV_MAJOR);
+		return -EOPNOTSUPP;
+	}
+
+	ah->hw_version.analog5GhzRev = val;
+
+	return 0;
+}
+
+void ar9002_hw_enable_async_fifo(struct ath_hw *ah)
+{
+	if (AR_SREV_9287_13_OR_LATER(ah)) {
+		REG_SET_BIT(ah, AR_MAC_PCU_ASYNC_FIFO_REG3,
+				AR_MAC_PCU_ASYNC_FIFO_REG3_DATAPATH_SEL);
+		REG_SET_BIT(ah, AR_PHY_MODE, AR_PHY_MODE_ASYNCFIFO);
+		REG_CLR_BIT(ah, AR_MAC_PCU_ASYNC_FIFO_REG3,
+				AR_MAC_PCU_ASYNC_FIFO_REG3_SOFT_RESET);
+		REG_SET_BIT(ah, AR_MAC_PCU_ASYNC_FIFO_REG3,
+				AR_MAC_PCU_ASYNC_FIFO_REG3_SOFT_RESET);
+	}
+}
+
+static void ar9002_hw_init_hang_checks(struct ath_hw *ah)
+{
+	if (AR_SREV_9100(ah) || AR_SREV_9160(ah)) {
+		ah->config.hw_hang_checks |= HW_BB_RIFS_HANG;
+		ah->config.hw_hang_checks |= HW_BB_DFS_HANG;
+	}
+
+	if (AR_SREV_9280(ah))
+		ah->config.hw_hang_checks |= HW_BB_RX_CLEAR_STUCK_HANG;
+
+	if (AR_SREV_5416(ah) || AR_SREV_9100(ah) || AR_SREV_9160(ah))
+		ah->config.hw_hang_checks |= HW_MAC_HANG;
+}
+
+/* Sets up the AR5008/AR9001/AR9002 hardware familiy callbacks */
+int ar9002_hw_attach_ops(struct ath_hw *ah)
+{
+	struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah);
+	struct ath_hw_ops *ops = ath9k_hw_ops(ah);
+	int ret;
+
+	ret = ar9002_hw_init_mode_regs(ah);
+	if (ret)
+		return ret;
+
+	priv_ops->init_mode_gain_regs = ar9002_hw_init_mode_gain_regs;
+	priv_ops->init_hang_checks = ar9002_hw_init_hang_checks;
+
+	ops->config_pci_powersave = ar9002_hw_configpcipowersave;
+
+	ret = ar5008_hw_attach_phy_ops(ah);
+	if (ret)
+		return ret;
+
+	if (AR_SREV_9280_20_OR_LATER(ah))
+		ar9002_hw_attach_phy_ops(ah);
+
+	ar9002_hw_attach_calib_ops(ah);
+	ar9002_hw_attach_mac_ops(ah);
+	return 0;
+}
+
+void ar9002_hw_load_ani_reg(struct ath_hw *ah, struct ath9k_channel *chan)
+{
+	u32 modesIndex;
+	int i;
+
+	if (IS_CHAN_5GHZ(chan))
+		modesIndex = IS_CHAN_HT40(chan) ? 2 : 1;
+	else
+		modesIndex = IS_CHAN_HT40(chan) ? 3 : 4;
+
+	ENABLE_REGWRITE_BUFFER(ah);
+
+	for (i = 0; i < ah->iniModes_9271_ANI_reg.ia_rows; i++) {
+		u32 reg = INI_RA(&ah->iniModes_9271_ANI_reg, i, 0);
+		u32 val = INI_RA(&ah->iniModes_9271_ANI_reg, i, modesIndex);
+		u32 val_orig;
+
+		if (reg == AR_PHY_CCK_DETECT) {
+			val_orig = REG_READ(ah, reg);
+			val &= AR_PHY_CCK_DETECT_WEAK_SIG_THR_CCK;
+			val_orig &= ~AR_PHY_CCK_DETECT_WEAK_SIG_THR_CCK;
+
+			REG_WRITE(ah, reg, val|val_orig);
+		} else
+			REG_WRITE(ah, reg, val);
+	}
+
+	REGWRITE_BUFFER_FLUSH(ah);
+}