Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 251 insertions, 0 deletions

diff --git a/drivers/video/fbdev/amba-clcd-nomadik.c b/drivers/video/fbdev/amba-clcd-nomadik.c
new file mode 100644
index 000000000..cd2db1113
--- /dev/null
+++ b/drivers/video/fbdev/amba-clcd-nomadik.c
@@ -0,0 +1,251 @@
+#include <linux/amba/bus.h>
+#include <linux/amba/clcd.h>
+#include <linux/gpio/consumer.h>
+#include <linux/of.h>
+#include <linux/of_graph.h>
+#include <linux/delay.h>
+#include <linux/bitops.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+
+#include "amba-clcd-nomadik.h"
+
+static struct gpio_desc *grestb;
+static struct gpio_desc *scen;
+static struct gpio_desc *scl;
+static struct gpio_desc *sda;
+
+static u8 tpg110_readwrite_reg(bool write, u8 address, u8 outval)
+{
+	int i;
+	u8 inval = 0;
+
+	/* Assert SCEN */
+	gpiod_set_value_cansleep(scen, 1);
+	ndelay(150);
+	/* Hammer out the address */
+	for (i = 5; i >= 0; i--) {
+		if (address & BIT(i))
+			gpiod_set_value_cansleep(sda, 1);
+		else
+			gpiod_set_value_cansleep(sda, 0);
+		ndelay(150);
+		/* Send an SCL pulse */
+		gpiod_set_value_cansleep(scl, 1);
+		ndelay(160);
+		gpiod_set_value_cansleep(scl, 0);
+		ndelay(160);
+	}
+
+	if (write) {
+		/* WRITE */
+		gpiod_set_value_cansleep(sda, 0);
+	} else {
+		/* READ */
+		gpiod_set_value_cansleep(sda, 1);
+	}
+	ndelay(150);
+	/* Send an SCL pulse */
+	gpiod_set_value_cansleep(scl, 1);
+	ndelay(160);
+	gpiod_set_value_cansleep(scl, 0);
+	ndelay(160);
+
+	if (!write)
+		/* HiZ turn-around cycle */
+		gpiod_direction_input(sda);
+	ndelay(150);
+	/* Send an SCL pulse */
+	gpiod_set_value_cansleep(scl, 1);
+	ndelay(160);
+	gpiod_set_value_cansleep(scl, 0);
+	ndelay(160);
+
+	/* Hammer in/out the data */
+	for (i = 7; i >= 0; i--) {
+		int value;
+
+		if (write) {
+			value = !!(outval & BIT(i));
+			gpiod_set_value_cansleep(sda, value);
+		} else {
+			value = gpiod_get_value(sda);
+			if (value)
+				inval |= BIT(i);
+		}
+		ndelay(150);
+		/* Send an SCL pulse */
+		gpiod_set_value_cansleep(scl, 1);
+		ndelay(160);
+		gpiod_set_value_cansleep(scl, 0);
+		ndelay(160);
+	}
+
+	gpiod_direction_output(sda, 0);
+	/* Deassert SCEN */
+	gpiod_set_value_cansleep(scen, 0);
+	/* Satisfies SCEN pulse width */
+	udelay(1);
+
+	return inval;
+}
+
+static u8 tpg110_read_reg(u8 address)
+{
+	return tpg110_readwrite_reg(false, address, 0);
+}
+
+static void tpg110_write_reg(u8 address, u8 outval)
+{
+	tpg110_readwrite_reg(true, address, outval);
+}
+
+static void tpg110_startup(struct device *dev)
+{
+	u8 val;
+
+	dev_info(dev, "TPG110 display enable\n");
+	/* De-assert the reset signal */
+	gpiod_set_value_cansleep(grestb, 0);
+	mdelay(1);
+	dev_info(dev, "de-asserted GRESTB\n");
+
+	/* Test display communication */
+	tpg110_write_reg(0x00, 0x55);
+	val = tpg110_read_reg(0x00);
+	if (val == 0x55)
+		dev_info(dev, "passed communication test\n");
+	val = tpg110_read_reg(0x01);
+	dev_info(dev, "TPG110 chip ID: %d version: %d\n",
+		val>>4, val&0x0f);
+
+	/* Show display resolution */
+	val = tpg110_read_reg(0x02);
+	val &= 7;
+	switch (val) {
+	case 0x0:
+		dev_info(dev, "IN 400x240 RGB -> OUT 800x480 RGB (dual scan)");
+		break;
+	case 0x1:
+		dev_info(dev, "IN 480x272 RGB -> OUT 800x480 RGB (dual scan)");
+		break;
+	case 0x4:
+		dev_info(dev, "480x640 RGB");
+		break;
+	case 0x5:
+		dev_info(dev, "480x272 RGB");
+		break;
+	case 0x6:
+		dev_info(dev, "640x480 RGB");
+		break;
+	case 0x7:
+		dev_info(dev, "800x480 RGB");
+		break;
+	default:
+		dev_info(dev, "ILLEGAL RESOLUTION");
+		break;
+	}
+
+	val = tpg110_read_reg(0x03);
+	dev_info(dev, "resolution is controlled by %s\n",
+		(val & BIT(7)) ? "software" : "hardware");
+}
+
+static void tpg110_enable(struct clcd_fb *fb)
+{
+	struct device *dev = &fb->dev->dev;
+	static bool startup;
+	u8 val;
+
+	if (!startup) {
+		tpg110_startup(dev);
+		startup = true;
+	}
+
+	/* Take chip out of standby */
+	val = tpg110_read_reg(0x03);
+	val |= BIT(0);
+	tpg110_write_reg(0x03, val);
+}
+
+static void tpg110_disable(struct clcd_fb *fb)
+{
+	u8 val;
+
+	dev_info(&fb->dev->dev, "TPG110 display disable\n");
+	val = tpg110_read_reg(0x03);
+	/* Put into standby */
+	val &= ~BIT(0);
+	tpg110_write_reg(0x03, val);
+}
+
+static void tpg110_init(struct device *dev, struct device_node *np,
+			struct clcd_board *board)
+{
+	dev_info(dev, "TPG110 display init\n");
+
+	/* This asserts the GRESTB signal, putting the display into reset */
+	grestb = devm_fwnode_get_gpiod_from_child(dev, "grestb", &np->fwnode,
+						  GPIOD_OUT_HIGH, "grestb");
+	if (IS_ERR(grestb)) {
+		dev_err(dev, "no GRESTB GPIO\n");
+		return;
+	}
+	scen = devm_fwnode_get_gpiod_from_child(dev, "scen", &np->fwnode,
+						GPIOD_OUT_LOW, "scen");
+	if (IS_ERR(scen)) {
+		dev_err(dev, "no SCEN GPIO\n");
+		return;
+	}
+	scl = devm_fwnode_get_gpiod_from_child(dev, "scl", &np->fwnode,
+					       GPIOD_OUT_LOW, "scl");
+	if (IS_ERR(scl)) {
+		dev_err(dev, "no SCL GPIO\n");
+		return;
+	}
+	sda = devm_fwnode_get_gpiod_from_child(dev, "sda", &np->fwnode,
+					       GPIOD_OUT_LOW, "sda");
+	if (IS_ERR(sda)) {
+		dev_err(dev, "no SDA GPIO\n");
+		return;
+	}
+	board->enable = tpg110_enable;
+	board->disable = tpg110_disable;
+}
+
+int nomadik_clcd_init_panel(struct clcd_fb *fb, struct device_node *panel)
+{
+	if (of_device_is_compatible(panel, "tpo,tpg110"))
+		tpg110_init(&fb->dev->dev, panel, fb->board);
+	else
+		dev_info(&fb->dev->dev, "unknown panel\n");
+
+	/* Unknown panel, fall through */
+	return 0;
+}
+EXPORT_SYMBOL_GPL(nomadik_clcd_init_panel);
+
+#define PMU_CTRL_OFFSET 0x0000
+#define PMU_CTRL_LCDNDIF BIT(26)
+
+int nomadik_clcd_init_board(struct amba_device *adev,
+			    struct clcd_board *board)
+{
+	struct regmap *pmu_regmap;
+
+	dev_info(&adev->dev, "Nomadik CLCD board init\n");
+	pmu_regmap =
+		syscon_regmap_lookup_by_compatible("stericsson,nomadik-pmu");
+	if (IS_ERR(pmu_regmap)) {
+		dev_err(&adev->dev, "could not find PMU syscon regmap\n");
+		return PTR_ERR(pmu_regmap);
+	}
+	regmap_update_bits(pmu_regmap,
+			   PMU_CTRL_OFFSET,
+			   PMU_CTRL_LCDNDIF,
+			   0);
+	dev_info(&adev->dev, "set PMU mux to CLCD mode\n");
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(nomadik_clcd_init_board);