Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 206 insertions, 0 deletions

diff --git a/lib/errseq.c b/lib/errseq.c
new file mode 100644
index 000000000..81f9e33aa
--- /dev/null
+++ b/lib/errseq.c
@@ -0,0 +1,206 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/err.h>
+#include <linux/bug.h>
+#include <linux/atomic.h>
+#include <linux/errseq.h>
+
+/*
+ * An errseq_t is a way of recording errors in one place, and allowing any
+ * number of "subscribers" to tell whether it has changed since a previous
+ * point where it was sampled.
+ *
+ * It's implemented as an unsigned 32-bit value. The low order bits are
+ * designated to hold an error code (between 0 and -MAX_ERRNO). The upper bits
+ * are used as a counter. This is done with atomics instead of locking so that
+ * these functions can be called from any context.
+ *
+ * The general idea is for consumers to sample an errseq_t value. That value
+ * can later be used to tell whether any new errors have occurred since that
+ * sampling was done.
+ *
+ * Note that there is a risk of collisions if new errors are being recorded
+ * frequently, since we have so few bits to use as a counter.
+ *
+ * To mitigate this, one bit is used as a flag to tell whether the value has
+ * been sampled since a new value was recorded. That allows us to avoid bumping
+ * the counter if no one has sampled it since the last time an error was
+ * recorded.
+ *
+ * A new errseq_t should always be zeroed out.  A errseq_t value of all zeroes
+ * is the special (but common) case where there has never been an error. An all
+ * zero value thus serves as the "epoch" if one wishes to know whether there
+ * has ever been an error set since it was first initialized.
+ */
+
+/* The low bits are designated for error code (max of MAX_ERRNO) */
+#define ERRSEQ_SHIFT		ilog2(MAX_ERRNO + 1)
+
+/* This bit is used as a flag to indicate whether the value has been seen */
+#define ERRSEQ_SEEN		(1 << ERRSEQ_SHIFT)
+
+/* The lowest bit of the counter */
+#define ERRSEQ_CTR_INC		(1 << (ERRSEQ_SHIFT + 1))
+
+/**
+ * errseq_set - set a errseq_t for later reporting
+ * @eseq: errseq_t field that should be set
+ * @err: error to set (must be between -1 and -MAX_ERRNO)
+ *
+ * This function sets the error in @eseq, and increments the sequence counter
+ * if the last sequence was sampled at some point in the past.
+ *
+ * Any error set will always overwrite an existing error.
+ *
+ * Return: The previous value, primarily for debugging purposes. The
+ * return value should not be used as a previously sampled value in later
+ * calls as it will not have the SEEN flag set.
+ */
+errseq_t errseq_set(errseq_t *eseq, int err)
+{
+	errseq_t cur, old;
+
+	/* MAX_ERRNO must be able to serve as a mask */
+	BUILD_BUG_ON_NOT_POWER_OF_2(MAX_ERRNO + 1);
+
+	/*
+	 * Ensure the error code actually fits where we want it to go. If it
+	 * doesn't then just throw a warning and don't record anything. We
+	 * also don't accept zero here as that would effectively clear a
+	 * previous error.
+	 */
+	old = READ_ONCE(*eseq);
+
+	if (WARN(unlikely(err == 0 || (unsigned int)-err > MAX_ERRNO),
+				"err = %d\n", err))
+		return old;
+
+	for (;;) {
+		errseq_t new;
+
+		/* Clear out error bits and set new error */
+		new = (old & ~(MAX_ERRNO|ERRSEQ_SEEN)) | -err;
+
+		/* Only increment if someone has looked at it */
+		if (old & ERRSEQ_SEEN)
+			new += ERRSEQ_CTR_INC;
+
+		/* If there would be no change, then call it done */
+		if (new == old) {
+			cur = new;
+			break;
+		}
+
+		/* Try to swap the new value into place */
+		cur = cmpxchg(eseq, old, new);
+
+		/*
+		 * Call it success if we did the swap or someone else beat us
+		 * to it for the same value.
+		 */
+		if (likely(cur == old || cur == new))
+			break;
+
+		/* Raced with an update, try again */
+		old = cur;
+	}
+	return cur;
+}
+EXPORT_SYMBOL(errseq_set);
+
+/**
+ * errseq_sample() - Grab current errseq_t value.
+ * @eseq: Pointer to errseq_t to be sampled.
+ *
+ * This function allows callers to initialise their errseq_t variable.
+ * If the error has been "seen", new callers will not see an old error.
+ * If there is an unseen error in @eseq, the caller of this function will
+ * see it the next time it checks for an error.
+ *
+ * Context: Any context.
+ * Return: The current errseq value.
+ */
+errseq_t errseq_sample(errseq_t *eseq)
+{
+	errseq_t old = READ_ONCE(*eseq);
+
+	/* If nobody has seen this error yet, then we can be the first. */
+	if (!(old & ERRSEQ_SEEN))
+		old = 0;
+	return old;
+}
+EXPORT_SYMBOL(errseq_sample);
+
+/**
+ * errseq_check() - Has an error occurred since a particular sample point?
+ * @eseq: Pointer to errseq_t value to be checked.
+ * @since: Previously-sampled errseq_t from which to check.
+ *
+ * Grab the value that eseq points to, and see if it has changed @since
+ * the given value was sampled. The @since value is not advanced, so there
+ * is no need to mark the value as seen.
+ *
+ * Return: The latest error set in the errseq_t or 0 if it hasn't changed.
+ */
+int errseq_check(errseq_t *eseq, errseq_t since)
+{
+	errseq_t cur = READ_ONCE(*eseq);
+
+	if (likely(cur == since))
+		return 0;
+	return -(cur & MAX_ERRNO);
+}
+EXPORT_SYMBOL(errseq_check);
+
+/**
+ * errseq_check_and_advance() - Check an errseq_t and advance to current value.
+ * @eseq: Pointer to value being checked and reported.
+ * @since: Pointer to previously-sampled errseq_t to check against and advance.
+ *
+ * Grab the eseq value, and see whether it matches the value that @since
+ * points to. If it does, then just return 0.
+ *
+ * If it doesn't, then the value has changed. Set the "seen" flag, and try to
+ * swap it into place as the new eseq value. Then, set that value as the new
+ * "since" value, and return whatever the error portion is set to.
+ *
+ * Note that no locking is provided here for concurrent updates to the "since"
+ * value. The caller must provide that if necessary. Because of this, callers
+ * may want to do a lockless errseq_check before taking the lock and calling
+ * this.
+ *
+ * Return: Negative errno if one has been stored, or 0 if no new error has
+ * occurred.
+ */
+int errseq_check_and_advance(errseq_t *eseq, errseq_t *since)
+{
+	int err = 0;
+	errseq_t old, new;
+
+	/*
+	 * Most callers will want to use the inline wrapper to check this,
+	 * so that the common case of no error is handled without needing
+	 * to take the lock that protects the "since" value.
+	 */
+	old = READ_ONCE(*eseq);
+	if (old != *since) {
+		/*
+		 * Set the flag and try to swap it into place if it has
+		 * changed.
+		 *
+		 * We don't care about the outcome of the swap here. If the
+		 * swap doesn't occur, then it has either been updated by a
+		 * writer who is altering the value in some way (updating
+		 * counter or resetting the error), or another reader who is
+		 * just setting the "seen" flag. Either outcome is OK, and we
+		 * can advance "since" and return an error based on what we
+		 * have.
+		 */
+		new = old | ERRSEQ_SEEN;
+		if (new != old)
+			cmpxchg(eseq, old, new);
+		*since = new;
+		err = -(new & MAX_ERRNO);
+	}
+	return err;
+}
+EXPORT_SYMBOL(errseq_check_and_advance);