Adding upstream version 4.19.249.upstream/4.19.249

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1002 insertions, 0 deletions

diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c
new file mode 100644
index 000000000..79138225e
--- /dev/null
+++ b/net/mac80211/agg-tx.c
@@ -0,0 +1,1002 @@
+/*
+ * HT handling
+ *
+ * Copyright 2003, Jouni Malinen <jkmaline@cc.hut.fi>
+ * Copyright 2002-2005, Instant802 Networks, Inc.
+ * Copyright 2005-2006, Devicescape Software, Inc.
+ * Copyright 2006-2007	Jiri Benc <jbenc@suse.cz>
+ * Copyright 2007, Michael Wu <flamingice@sourmilk.net>
+ * Copyright 2007-2010, Intel Corporation
+ * Copyright(c) 2015-2017 Intel Deutschland GmbH
+ * Copyright (C) 2018 - 2019 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/ieee80211.h>
+#include <linux/slab.h>
+#include <linux/export.h>
+#include <net/mac80211.h>
+#include "ieee80211_i.h"
+#include "driver-ops.h"
+#include "wme.h"
+
+/**
+ * DOC: TX A-MPDU aggregation
+ *
+ * Aggregation on the TX side requires setting the hardware flag
+ * %IEEE80211_HW_AMPDU_AGGREGATION. The driver will then be handed
+ * packets with a flag indicating A-MPDU aggregation. The driver
+ * or device is responsible for actually aggregating the frames,
+ * as well as deciding how many and which to aggregate.
+ *
+ * When TX aggregation is started by some subsystem (usually the rate
+ * control algorithm would be appropriate) by calling the
+ * ieee80211_start_tx_ba_session() function, the driver will be
+ * notified via its @ampdu_action function, with the
+ * %IEEE80211_AMPDU_TX_START action.
+ *
+ * In response to that, the driver is later required to call the
+ * ieee80211_start_tx_ba_cb_irqsafe() function, which will really
+ * start the aggregation session after the peer has also responded.
+ * If the peer responds negatively, the session will be stopped
+ * again right away. Note that it is possible for the aggregation
+ * session to be stopped before the driver has indicated that it
+ * is done setting it up, in which case it must not indicate the
+ * setup completion.
+ *
+ * Also note that, since we also need to wait for a response from
+ * the peer, the driver is notified of the completion of the
+ * handshake by the %IEEE80211_AMPDU_TX_OPERATIONAL action to the
+ * @ampdu_action callback.
+ *
+ * Similarly, when the aggregation session is stopped by the peer
+ * or something calling ieee80211_stop_tx_ba_session(), the driver's
+ * @ampdu_action function will be called with the action
+ * %IEEE80211_AMPDU_TX_STOP. In this case, the call must not fail,
+ * and the driver must later call ieee80211_stop_tx_ba_cb_irqsafe().
+ * Note that the sta can get destroyed before the BA tear down is
+ * complete.
+ */
+
+static void ieee80211_send_addba_request(struct ieee80211_sub_if_data *sdata,
+					 const u8 *da, u16 tid,
+					 u8 dialog_token, u16 start_seq_num,
+					 u16 agg_size, u16 timeout)
+{
+	struct ieee80211_local *local = sdata->local;
+	struct sk_buff *skb;
+	struct ieee80211_mgmt *mgmt;
+	u16 capab;
+
+	skb = dev_alloc_skb(sizeof(*mgmt) + local->hw.extra_tx_headroom);
+
+	if (!skb)
+		return;
+
+	skb_reserve(skb, local->hw.extra_tx_headroom);
+	mgmt = skb_put_zero(skb, 24);
+	memcpy(mgmt->da, da, ETH_ALEN);
+	memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
+	if (sdata->vif.type == NL80211_IFTYPE_AP ||
+	    sdata->vif.type == NL80211_IFTYPE_AP_VLAN ||
+	    sdata->vif.type == NL80211_IFTYPE_MESH_POINT)
+		memcpy(mgmt->bssid, sdata->vif.addr, ETH_ALEN);
+	else if (sdata->vif.type == NL80211_IFTYPE_STATION)
+		memcpy(mgmt->bssid, sdata->u.mgd.bssid, ETH_ALEN);
+	else if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
+		memcpy(mgmt->bssid, sdata->u.ibss.bssid, ETH_ALEN);
+
+	mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
+					  IEEE80211_STYPE_ACTION);
+
+	skb_put(skb, 1 + sizeof(mgmt->u.action.u.addba_req));
+
+	mgmt->u.action.category = WLAN_CATEGORY_BACK;
+	mgmt->u.action.u.addba_req.action_code = WLAN_ACTION_ADDBA_REQ;
+
+	mgmt->u.action.u.addba_req.dialog_token = dialog_token;
+	capab = (u16)(1 << 0);		/* bit 0 A-MSDU support */
+	capab |= (u16)(1 << 1);		/* bit 1 aggregation policy */
+	capab |= (u16)(tid << 2); 	/* bit 5:2 TID number */
+	capab |= (u16)(agg_size << 6);	/* bit 15:6 max size of aggergation */
+
+	mgmt->u.action.u.addba_req.capab = cpu_to_le16(capab);
+
+	mgmt->u.action.u.addba_req.timeout = cpu_to_le16(timeout);
+	mgmt->u.action.u.addba_req.start_seq_num =
+					cpu_to_le16(start_seq_num << 4);
+
+	ieee80211_tx_skb_tid(sdata, skb, tid);
+}
+
+void ieee80211_send_bar(struct ieee80211_vif *vif, u8 *ra, u16 tid, u16 ssn)
+{
+	struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
+	struct ieee80211_local *local = sdata->local;
+	struct sk_buff *skb;
+	struct ieee80211_bar *bar;
+	u16 bar_control = 0;
+
+	skb = dev_alloc_skb(sizeof(*bar) + local->hw.extra_tx_headroom);
+	if (!skb)
+		return;
+
+	skb_reserve(skb, local->hw.extra_tx_headroom);
+	bar = skb_put_zero(skb, sizeof(*bar));
+	bar->frame_control = cpu_to_le16(IEEE80211_FTYPE_CTL |
+					 IEEE80211_STYPE_BACK_REQ);
+	memcpy(bar->ra, ra, ETH_ALEN);
+	memcpy(bar->ta, sdata->vif.addr, ETH_ALEN);
+	bar_control |= (u16)IEEE80211_BAR_CTRL_ACK_POLICY_NORMAL;
+	bar_control |= (u16)IEEE80211_BAR_CTRL_CBMTID_COMPRESSED_BA;
+	bar_control |= (u16)(tid << IEEE80211_BAR_CTRL_TID_INFO_SHIFT);
+	bar->control = cpu_to_le16(bar_control);
+	bar->start_seq_num = cpu_to_le16(ssn);
+
+	IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT |
+					IEEE80211_TX_CTL_REQ_TX_STATUS;
+	ieee80211_tx_skb_tid(sdata, skb, tid);
+}
+EXPORT_SYMBOL(ieee80211_send_bar);
+
+void ieee80211_assign_tid_tx(struct sta_info *sta, int tid,
+			     struct tid_ampdu_tx *tid_tx)
+{
+	lockdep_assert_held(&sta->ampdu_mlme.mtx);
+	lockdep_assert_held(&sta->lock);
+	rcu_assign_pointer(sta->ampdu_mlme.tid_tx[tid], tid_tx);
+}
+
+/*
+ * When multiple aggregation sessions on multiple stations
+ * are being created/destroyed simultaneously, we need to
+ * refcount the global queue stop caused by that in order
+ * to not get into a situation where one of the aggregation
+ * setup or teardown re-enables queues before the other is
+ * ready to handle that.
+ *
+ * These two functions take care of this issue by keeping
+ * a global "agg_queue_stop" refcount.
+ */
+static void __acquires(agg_queue)
+ieee80211_stop_queue_agg(struct ieee80211_sub_if_data *sdata, int tid)
+{
+	int queue = sdata->vif.hw_queue[ieee80211_ac_from_tid(tid)];
+
+	/* we do refcounting here, so don't use the queue reason refcounting */
+
+	if (atomic_inc_return(&sdata->local->agg_queue_stop[queue]) == 1)
+		ieee80211_stop_queue_by_reason(
+			&sdata->local->hw, queue,
+			IEEE80211_QUEUE_STOP_REASON_AGGREGATION,
+			false);
+	__acquire(agg_queue);
+}
+
+static void __releases(agg_queue)
+ieee80211_wake_queue_agg(struct ieee80211_sub_if_data *sdata, int tid)
+{
+	int queue = sdata->vif.hw_queue[ieee80211_ac_from_tid(tid)];
+
+	if (atomic_dec_return(&sdata->local->agg_queue_stop[queue]) == 0)
+		ieee80211_wake_queue_by_reason(
+			&sdata->local->hw, queue,
+			IEEE80211_QUEUE_STOP_REASON_AGGREGATION,
+			false);
+	__release(agg_queue);
+}
+
+static void
+ieee80211_agg_stop_txq(struct sta_info *sta, int tid)
+{
+	struct ieee80211_txq *txq = sta->sta.txq[tid];
+	struct ieee80211_sub_if_data *sdata;
+	struct fq *fq;
+	struct txq_info *txqi;
+
+	if (!txq)
+		return;
+
+	txqi = to_txq_info(txq);
+	sdata = vif_to_sdata(txq->vif);
+	fq = &sdata->local->fq;
+
+	/* Lock here to protect against further seqno updates on dequeue */
+	spin_lock_bh(&fq->lock);
+	set_bit(IEEE80211_TXQ_STOP, &txqi->flags);
+	spin_unlock_bh(&fq->lock);
+}
+
+static void
+ieee80211_agg_start_txq(struct sta_info *sta, int tid, bool enable)
+{
+	struct ieee80211_txq *txq = sta->sta.txq[tid];
+	struct txq_info *txqi;
+
+	if (!txq)
+		return;
+
+	txqi = to_txq_info(txq);
+
+	if (enable)
+		set_bit(IEEE80211_TXQ_AMPDU, &txqi->flags);
+	else
+		clear_bit(IEEE80211_TXQ_AMPDU, &txqi->flags);
+
+	clear_bit(IEEE80211_TXQ_STOP, &txqi->flags);
+	local_bh_disable();
+	rcu_read_lock();
+	drv_wake_tx_queue(sta->sdata->local, txqi);
+	rcu_read_unlock();
+	local_bh_enable();
+}
+
+/*
+ * splice packets from the STA's pending to the local pending,
+ * requires a call to ieee80211_agg_splice_finish later
+ */
+static void __acquires(agg_queue)
+ieee80211_agg_splice_packets(struct ieee80211_sub_if_data *sdata,
+			     struct tid_ampdu_tx *tid_tx, u16 tid)
+{
+	struct ieee80211_local *local = sdata->local;
+	int queue = sdata->vif.hw_queue[ieee80211_ac_from_tid(tid)];
+	unsigned long flags;
+
+	ieee80211_stop_queue_agg(sdata, tid);
+
+	if (WARN(!tid_tx,
+		 "TID %d gone but expected when splicing aggregates from the pending queue\n",
+		 tid))
+		return;
+
+	if (!skb_queue_empty(&tid_tx->pending)) {
+		spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
+		/* copy over remaining packets */
+		skb_queue_splice_tail_init(&tid_tx->pending,
+					   &local->pending[queue]);
+		spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
+	}
+}
+
+static void __releases(agg_queue)
+ieee80211_agg_splice_finish(struct ieee80211_sub_if_data *sdata, u16 tid)
+{
+	ieee80211_wake_queue_agg(sdata, tid);
+}
+
+static void ieee80211_remove_tid_tx(struct sta_info *sta, int tid)
+{
+	struct tid_ampdu_tx *tid_tx;
+
+	lockdep_assert_held(&sta->ampdu_mlme.mtx);
+	lockdep_assert_held(&sta->lock);
+
+	tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
+
+	/*
+	 * When we get here, the TX path will not be lockless any more wrt.
+	 * aggregation, since the OPERATIONAL bit has long been cleared.
+	 * Thus it will block on getting the lock, if it occurs. So if we
+	 * stop the queue now, we will not get any more packets, and any
+	 * that might be being processed will wait for us here, thereby
+	 * guaranteeing that no packets go to the tid_tx pending queue any
+	 * more.
+	 */
+
+	ieee80211_agg_splice_packets(sta->sdata, tid_tx, tid);
+
+	/* future packets must not find the tid_tx struct any more */
+	ieee80211_assign_tid_tx(sta, tid, NULL);
+
+	ieee80211_agg_splice_finish(sta->sdata, tid);
+	ieee80211_agg_start_txq(sta, tid, false);
+
+	kfree_rcu(tid_tx, rcu_head);
+}
+
+int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid,
+				    enum ieee80211_agg_stop_reason reason)
+{
+	struct ieee80211_local *local = sta->local;
+	struct tid_ampdu_tx *tid_tx;
+	struct ieee80211_ampdu_params params = {
+		.sta = &sta->sta,
+		.tid = tid,
+		.buf_size = 0,
+		.amsdu = false,
+		.timeout = 0,
+		.ssn = 0,
+	};
+	int ret;
+
+	lockdep_assert_held(&sta->ampdu_mlme.mtx);
+
+	switch (reason) {
+	case AGG_STOP_DECLINED:
+	case AGG_STOP_LOCAL_REQUEST:
+	case AGG_STOP_PEER_REQUEST:
+		params.action = IEEE80211_AMPDU_TX_STOP_CONT;
+		break;
+	case AGG_STOP_DESTROY_STA:
+		params.action = IEEE80211_AMPDU_TX_STOP_FLUSH;
+		break;
+	default:
+		WARN_ON_ONCE(1);
+		return -EINVAL;
+	}
+
+	spin_lock_bh(&sta->lock);
+
+	/* free struct pending for start, if present */
+	tid_tx = sta->ampdu_mlme.tid_start_tx[tid];
+	kfree(tid_tx);
+	sta->ampdu_mlme.tid_start_tx[tid] = NULL;
+
+	tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
+	if (!tid_tx) {
+		spin_unlock_bh(&sta->lock);
+		return -ENOENT;
+	}
+
+	/*
+	 * if we're already stopping ignore any new requests to stop
+	 * unless we're destroying it in which case notify the driver
+	 */
+	if (test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) {
+		spin_unlock_bh(&sta->lock);
+		if (reason != AGG_STOP_DESTROY_STA)
+			return -EALREADY;
+		params.action = IEEE80211_AMPDU_TX_STOP_FLUSH_CONT;
+		ret = drv_ampdu_action(local, sta->sdata, &params);
+		WARN_ON_ONCE(ret);
+		return 0;
+	}
+
+	if (test_bit(HT_AGG_STATE_WANT_START, &tid_tx->state)) {
+		/* not even started yet! */
+		ieee80211_assign_tid_tx(sta, tid, NULL);
+		spin_unlock_bh(&sta->lock);
+		kfree_rcu(tid_tx, rcu_head);
+		return 0;
+	}
+
+	set_bit(HT_AGG_STATE_STOPPING, &tid_tx->state);
+
+	ieee80211_agg_stop_txq(sta, tid);
+
+	spin_unlock_bh(&sta->lock);
+
+	ht_dbg(sta->sdata, "Tx BA session stop requested for %pM tid %u\n",
+	       sta->sta.addr, tid);
+
+	del_timer_sync(&tid_tx->addba_resp_timer);
+	del_timer_sync(&tid_tx->session_timer);
+
+	/*
+	 * After this packets are no longer handed right through
+	 * to the driver but are put onto tid_tx->pending instead,
+	 * with locking to ensure proper access.
+	 */
+	clear_bit(HT_AGG_STATE_OPERATIONAL, &tid_tx->state);
+
+	/*
+	 * There might be a few packets being processed right now (on
+	 * another CPU) that have already gotten past the aggregation
+	 * check when it was still OPERATIONAL and consequently have
+	 * IEEE80211_TX_CTL_AMPDU set. In that case, this code might
+	 * call into the driver at the same time or even before the
+	 * TX paths calls into it, which could confuse the driver.
+	 *
+	 * Wait for all currently running TX paths to finish before
+	 * telling the driver. New packets will not go through since
+	 * the aggregation session is no longer OPERATIONAL.
+	 */
+	if (!local->in_reconfig)
+		synchronize_net();
+
+	tid_tx->stop_initiator = reason == AGG_STOP_PEER_REQUEST ?
+					WLAN_BACK_RECIPIENT :
+					WLAN_BACK_INITIATOR;
+	tid_tx->tx_stop = reason == AGG_STOP_LOCAL_REQUEST;
+
+	ret = drv_ampdu_action(local, sta->sdata, &params);
+
+	/* HW shall not deny going back to legacy */
+	if (WARN_ON(ret)) {
+		/*
+		 * We may have pending packets get stuck in this case...
+		 * Not bothering with a workaround for now.
+		 */
+	}
+
+	/*
+	 * In the case of AGG_STOP_DESTROY_STA, the driver won't
+	 * necessarily call ieee80211_stop_tx_ba_cb(), so this may
+	 * seem like we can leave the tid_tx data pending forever.
+	 * This is true, in a way, but "forever" is only until the
+	 * station struct is actually destroyed. In the meantime,
+	 * leaving it around ensures that we don't transmit packets
+	 * to the driver on this TID which might confuse it.
+	 */
+
+	return 0;
+}
+
+/*
+ * After sending add Block Ack request we activated a timer until
+ * add Block Ack response will arrive from the recipient.
+ * If this timer expires sta_addba_resp_timer_expired will be executed.
+ */
+static void sta_addba_resp_timer_expired(struct timer_list *t)
+{
+	struct tid_ampdu_tx *tid_tx = from_timer(tid_tx, t, addba_resp_timer);
+	struct sta_info *sta = tid_tx->sta;
+	u8 tid = tid_tx->tid;
+
+	/* check if the TID waits for addBA response */
+	if (test_bit(HT_AGG_STATE_RESPONSE_RECEIVED, &tid_tx->state)) {
+		ht_dbg(sta->sdata,
+		       "timer expired on %pM tid %d not expecting addBA response\n",
+		       sta->sta.addr, tid);
+		return;
+	}
+
+	ht_dbg(sta->sdata, "addBA response timer expired on %pM tid %d\n",
+	       sta->sta.addr, tid);
+
+	ieee80211_stop_tx_ba_session(&sta->sta, tid);
+}
+
+void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid)
+{
+	struct tid_ampdu_tx *tid_tx;
+	struct ieee80211_local *local = sta->local;
+	struct ieee80211_sub_if_data *sdata = sta->sdata;
+	struct ieee80211_ampdu_params params = {
+		.sta = &sta->sta,
+		.action = IEEE80211_AMPDU_TX_START,
+		.tid = tid,
+		.buf_size = 0,
+		.amsdu = false,
+		.timeout = 0,
+	};
+	int ret;
+	u16 buf_size;
+
+	tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
+
+	/*
+	 * Start queuing up packets for this aggregation session.
+	 * We're going to release them once the driver is OK with
+	 * that.
+	 */
+	clear_bit(HT_AGG_STATE_WANT_START, &tid_tx->state);
+
+	ieee80211_agg_stop_txq(sta, tid);
+
+	/*
+	 * Make sure no packets are being processed. This ensures that
+	 * we have a valid starting sequence number and that in-flight
+	 * packets have been flushed out and no packets for this TID
+	 * will go into the driver during the ampdu_action call.
+	 */
+	synchronize_net();
+
+	params.ssn = sta->tid_seq[tid] >> 4;
+	ret = drv_ampdu_action(local, sdata, &params);
+	if (ret) {
+		ht_dbg(sdata,
+		       "BA request denied - HW unavailable for %pM tid %d\n",
+		       sta->sta.addr, tid);
+		spin_lock_bh(&sta->lock);
+		ieee80211_agg_splice_packets(sdata, tid_tx, tid);
+		ieee80211_assign_tid_tx(sta, tid, NULL);
+		ieee80211_agg_splice_finish(sdata, tid);
+		spin_unlock_bh(&sta->lock);
+
+		ieee80211_agg_start_txq(sta, tid, false);
+
+		kfree_rcu(tid_tx, rcu_head);
+		return;
+	}
+
+	/* activate the timer for the recipient's addBA response */
+	mod_timer(&tid_tx->addba_resp_timer, jiffies + ADDBA_RESP_INTERVAL);
+	ht_dbg(sdata, "activated addBA response timer on %pM tid %d\n",
+	       sta->sta.addr, tid);
+
+	spin_lock_bh(&sta->lock);
+	sta->ampdu_mlme.last_addba_req_time[tid] = jiffies;
+	sta->ampdu_mlme.addba_req_num[tid]++;
+	spin_unlock_bh(&sta->lock);
+
+	if (sta->sta.he_cap.has_he) {
+		buf_size = local->hw.max_tx_aggregation_subframes;
+	} else {
+		/*
+		 * We really should use what the driver told us it will
+		 * transmit as the maximum, but certain APs (e.g. the
+		 * LinkSys WRT120N with FW v1.0.07 build 002 Jun 18 2012)
+		 * will crash when we use a lower number.
+		 */
+		buf_size = IEEE80211_MAX_AMPDU_BUF_HT;
+	}
+
+	/* send AddBA request */
+	ieee80211_send_addba_request(sdata, sta->sta.addr, tid,
+				     tid_tx->dialog_token, params.ssn,
+				     buf_size, tid_tx->timeout);
+}
+
+/*
+ * After accepting the AddBA Response we activated a timer,
+ * resetting it after each frame that we send.
+ */
+static void sta_tx_agg_session_timer_expired(struct timer_list *t)
+{
+	struct tid_ampdu_tx *tid_tx = from_timer(tid_tx, t, session_timer);
+	struct sta_info *sta = tid_tx->sta;
+	u8 tid = tid_tx->tid;
+	unsigned long timeout;
+
+	if (test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) {
+		return;
+	}
+
+	timeout = tid_tx->last_tx + TU_TO_JIFFIES(tid_tx->timeout);
+	if (time_is_after_jiffies(timeout)) {
+		mod_timer(&tid_tx->session_timer, timeout);
+		return;
+	}
+
+	ht_dbg(sta->sdata, "tx session timer expired on %pM tid %d\n",
+	       sta->sta.addr, tid);
+
+	ieee80211_stop_tx_ba_session(&sta->sta, tid);
+}
+
+int ieee80211_start_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid,
+				  u16 timeout)
+{
+	struct sta_info *sta = container_of(pubsta, struct sta_info, sta);
+	struct ieee80211_sub_if_data *sdata = sta->sdata;
+	struct ieee80211_local *local = sdata->local;
+	struct tid_ampdu_tx *tid_tx;
+	int ret = 0;
+
+	trace_api_start_tx_ba_session(pubsta, tid);
+
+	if (WARN(sta->reserved_tid == tid,
+		 "Requested to start BA session on reserved tid=%d", tid))
+		return -EINVAL;
+
+	if (!pubsta->ht_cap.ht_supported)
+		return -EINVAL;
+
+	if (WARN_ON_ONCE(!local->ops->ampdu_action))
+		return -EINVAL;
+
+	if ((tid >= IEEE80211_NUM_TIDS) ||
+	    !ieee80211_hw_check(&local->hw, AMPDU_AGGREGATION) ||
+	    ieee80211_hw_check(&local->hw, TX_AMPDU_SETUP_IN_HW))
+		return -EINVAL;
+
+	if (WARN_ON(tid >= IEEE80211_FIRST_TSPEC_TSID))
+		return -EINVAL;
+
+	ht_dbg(sdata, "Open BA session requested for %pM tid %u\n",
+	       pubsta->addr, tid);
+
+	if (sdata->vif.type != NL80211_IFTYPE_STATION &&
+	    sdata->vif.type != NL80211_IFTYPE_MESH_POINT &&
+	    sdata->vif.type != NL80211_IFTYPE_AP_VLAN &&
+	    sdata->vif.type != NL80211_IFTYPE_AP &&
+	    sdata->vif.type != NL80211_IFTYPE_ADHOC)
+		return -EINVAL;
+
+	if (test_sta_flag(sta, WLAN_STA_BLOCK_BA)) {
+		ht_dbg(sdata,
+		       "BA sessions blocked - Denying BA session request %pM tid %d\n",
+		       sta->sta.addr, tid);
+		return -EINVAL;
+	}
+
+	/*
+	 * 802.11n-2009 11.5.1.1: If the initiating STA is an HT STA, is a
+	 * member of an IBSS, and has no other existing Block Ack agreement
+	 * with the recipient STA, then the initiating STA shall transmit a
+	 * Probe Request frame to the recipient STA and shall not transmit an
+	 * ADDBA Request frame unless it receives a Probe Response frame
+	 * from the recipient within dot11ADDBAFailureTimeout.
+	 *
+	 * The probe request mechanism for ADDBA is currently not implemented,
+	 * but we only build up Block Ack session with HT STAs. This information
+	 * is set when we receive a bss info from a probe response or a beacon.
+	 */
+	if (sta->sdata->vif.type == NL80211_IFTYPE_ADHOC &&
+	    !sta->sta.ht_cap.ht_supported) {
+		ht_dbg(sdata,
+		       "BA request denied - IBSS STA %pM does not advertise HT support\n",
+		       pubsta->addr);
+		return -EINVAL;
+	}
+
+	spin_lock_bh(&sta->lock);
+
+	/* we have tried too many times, receiver does not want A-MPDU */
+	if (sta->ampdu_mlme.addba_req_num[tid] > HT_AGG_MAX_RETRIES) {
+		ret = -EBUSY;
+		goto err_unlock_sta;
+	}
+
+	/*
+	 * if we have tried more than HT_AGG_BURST_RETRIES times we
+	 * will spread our requests in time to avoid stalling connection
+	 * for too long
+	 */
+	if (sta->ampdu_mlme.addba_req_num[tid] > HT_AGG_BURST_RETRIES &&
+	    time_before(jiffies, sta->ampdu_mlme.last_addba_req_time[tid] +
+			HT_AGG_RETRIES_PERIOD)) {
+		ht_dbg(sdata,
+		       "BA request denied - %d failed requests on %pM tid %u\n",
+		       sta->ampdu_mlme.addba_req_num[tid], sta->sta.addr, tid);
+		ret = -EBUSY;
+		goto err_unlock_sta;
+	}
+
+	tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
+	/* check if the TID is not in aggregation flow already */
+	if (tid_tx || sta->ampdu_mlme.tid_start_tx[tid]) {
+		ht_dbg(sdata,
+		       "BA request denied - session is not idle on %pM tid %u\n",
+		       sta->sta.addr, tid);
+		ret = -EAGAIN;
+		goto err_unlock_sta;
+	}
+
+	/* prepare A-MPDU MLME for Tx aggregation */
+	tid_tx = kzalloc(sizeof(struct tid_ampdu_tx), GFP_ATOMIC);
+	if (!tid_tx) {
+		ret = -ENOMEM;
+		goto err_unlock_sta;
+	}
+
+	skb_queue_head_init(&tid_tx->pending);
+	__set_bit(HT_AGG_STATE_WANT_START, &tid_tx->state);
+
+	tid_tx->timeout = timeout;
+	tid_tx->sta = sta;
+	tid_tx->tid = tid;
+
+	/* response timer */
+	timer_setup(&tid_tx->addba_resp_timer, sta_addba_resp_timer_expired, 0);
+
+	/* tx timer */
+	timer_setup(&tid_tx->session_timer,
+		    sta_tx_agg_session_timer_expired, TIMER_DEFERRABLE);
+
+	/* assign a dialog token */
+	sta->ampdu_mlme.dialog_token_allocator++;
+	tid_tx->dialog_token = sta->ampdu_mlme.dialog_token_allocator;
+
+	/*
+	 * Finally, assign it to the start array; the work item will
+	 * collect it and move it to the normal array.
+	 */
+	sta->ampdu_mlme.tid_start_tx[tid] = tid_tx;
+
+	ieee80211_queue_work(&local->hw, &sta->ampdu_mlme.work);
+
+	/* this flow continues off the work */
+ err_unlock_sta:
+	spin_unlock_bh(&sta->lock);
+	return ret;
+}
+EXPORT_SYMBOL(ieee80211_start_tx_ba_session);
+
+static void ieee80211_agg_tx_operational(struct ieee80211_local *local,
+					 struct sta_info *sta, u16 tid)
+{
+	struct tid_ampdu_tx *tid_tx;
+	struct ieee80211_ampdu_params params = {
+		.sta = &sta->sta,
+		.action = IEEE80211_AMPDU_TX_OPERATIONAL,
+		.tid = tid,
+		.timeout = 0,
+		.ssn = 0,
+	};
+
+	lockdep_assert_held(&sta->ampdu_mlme.mtx);
+
+	tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
+	params.buf_size = tid_tx->buf_size;
+	params.amsdu = tid_tx->amsdu;
+
+	ht_dbg(sta->sdata, "Aggregation is on for %pM tid %d\n",
+	       sta->sta.addr, tid);
+
+	drv_ampdu_action(local, sta->sdata, &params);
+
+	/*
+	 * synchronize with TX path, while splicing the TX path
+	 * should block so it won't put more packets onto pending.
+	 */
+	spin_lock_bh(&sta->lock);
+
+	ieee80211_agg_splice_packets(sta->sdata, tid_tx, tid);
+	/*
+	 * Now mark as operational. This will be visible
+	 * in the TX path, and lets it go lock-free in
+	 * the common case.
+	 */
+	set_bit(HT_AGG_STATE_OPERATIONAL, &tid_tx->state);
+	ieee80211_agg_splice_finish(sta->sdata, tid);
+
+	spin_unlock_bh(&sta->lock);
+
+	ieee80211_agg_start_txq(sta, tid, true);
+}
+
+void ieee80211_start_tx_ba_cb(struct sta_info *sta, int tid,
+			      struct tid_ampdu_tx *tid_tx)
+{
+	struct ieee80211_sub_if_data *sdata = sta->sdata;
+	struct ieee80211_local *local = sdata->local;
+
+	if (WARN_ON(test_and_set_bit(HT_AGG_STATE_DRV_READY, &tid_tx->state)))
+		return;
+
+	if (test_bit(HT_AGG_STATE_RESPONSE_RECEIVED, &tid_tx->state))
+		ieee80211_agg_tx_operational(local, sta, tid);
+}
+
+static struct tid_ampdu_tx *
+ieee80211_lookup_tid_tx(struct ieee80211_sub_if_data *sdata,
+			const u8 *ra, u16 tid, struct sta_info **sta)
+{
+	struct tid_ampdu_tx *tid_tx;
+
+	if (tid >= IEEE80211_NUM_TIDS) {
+		ht_dbg(sdata, "Bad TID value: tid = %d (>= %d)\n",
+		       tid, IEEE80211_NUM_TIDS);
+		return NULL;
+	}
+
+	*sta = sta_info_get_bss(sdata, ra);
+	if (!*sta) {
+		ht_dbg(sdata, "Could not find station: %pM\n", ra);
+		return NULL;
+	}
+
+	tid_tx = rcu_dereference((*sta)->ampdu_mlme.tid_tx[tid]);
+
+	if (WARN_ON(!tid_tx))
+		ht_dbg(sdata, "addBA was not requested!\n");
+
+	return tid_tx;
+}
+
+void ieee80211_start_tx_ba_cb_irqsafe(struct ieee80211_vif *vif,
+				      const u8 *ra, u16 tid)
+{
+	struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
+	struct ieee80211_local *local = sdata->local;
+	struct sta_info *sta;
+	struct tid_ampdu_tx *tid_tx;
+
+	trace_api_start_tx_ba_cb(sdata, ra, tid);
+
+	rcu_read_lock();
+	tid_tx = ieee80211_lookup_tid_tx(sdata, ra, tid, &sta);
+	if (!tid_tx)
+		goto out;
+
+	set_bit(HT_AGG_STATE_START_CB, &tid_tx->state);
+	ieee80211_queue_work(&local->hw, &sta->ampdu_mlme.work);
+ out:
+	rcu_read_unlock();
+}
+EXPORT_SYMBOL(ieee80211_start_tx_ba_cb_irqsafe);
+
+int __ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid,
+				   enum ieee80211_agg_stop_reason reason)
+{
+	int ret;
+
+	mutex_lock(&sta->ampdu_mlme.mtx);
+
+	ret = ___ieee80211_stop_tx_ba_session(sta, tid, reason);
+
+	mutex_unlock(&sta->ampdu_mlme.mtx);
+
+	return ret;
+}
+
+int ieee80211_stop_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid)
+{
+	struct sta_info *sta = container_of(pubsta, struct sta_info, sta);
+	struct ieee80211_sub_if_data *sdata = sta->sdata;
+	struct ieee80211_local *local = sdata->local;
+	struct tid_ampdu_tx *tid_tx;
+	int ret = 0;
+
+	trace_api_stop_tx_ba_session(pubsta, tid);
+
+	if (!local->ops->ampdu_action)
+		return -EINVAL;
+
+	if (tid >= IEEE80211_NUM_TIDS)
+		return -EINVAL;
+
+	spin_lock_bh(&sta->lock);
+	tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
+
+	if (!tid_tx) {
+		ret = -ENOENT;
+		goto unlock;
+	}
+
+	WARN(sta->reserved_tid == tid,
+	     "Requested to stop BA session on reserved tid=%d", tid);
+
+	if (test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) {
+		/* already in progress stopping it */
+		ret = 0;
+		goto unlock;
+	}
+
+	set_bit(HT_AGG_STATE_WANT_STOP, &tid_tx->state);
+	ieee80211_queue_work(&local->hw, &sta->ampdu_mlme.work);
+
+ unlock:
+	spin_unlock_bh(&sta->lock);
+	return ret;
+}
+EXPORT_SYMBOL(ieee80211_stop_tx_ba_session);
+
+void ieee80211_stop_tx_ba_cb(struct sta_info *sta, int tid,
+			     struct tid_ampdu_tx *tid_tx)
+{
+	struct ieee80211_sub_if_data *sdata = sta->sdata;
+	bool send_delba = false;
+
+	ht_dbg(sdata, "Stopping Tx BA session for %pM tid %d\n",
+	       sta->sta.addr, tid);
+
+	spin_lock_bh(&sta->lock);
+
+	if (!test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) {
+		ht_dbg(sdata,
+		       "unexpected callback to A-MPDU stop for %pM tid %d\n",
+		       sta->sta.addr, tid);
+		goto unlock_sta;
+	}
+
+	if (tid_tx->stop_initiator == WLAN_BACK_INITIATOR && tid_tx->tx_stop)
+		send_delba = true;
+
+	ieee80211_remove_tid_tx(sta, tid);
+
+ unlock_sta:
+	spin_unlock_bh(&sta->lock);
+
+	if (send_delba)
+		ieee80211_send_delba(sdata, sta->sta.addr, tid,
+			WLAN_BACK_INITIATOR, WLAN_REASON_QSTA_NOT_USE);
+}
+
+void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_vif *vif,
+				     const u8 *ra, u16 tid)
+{
+	struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
+	struct ieee80211_local *local = sdata->local;
+	struct sta_info *sta;
+	struct tid_ampdu_tx *tid_tx;
+
+	trace_api_stop_tx_ba_cb(sdata, ra, tid);
+
+	rcu_read_lock();
+	tid_tx = ieee80211_lookup_tid_tx(sdata, ra, tid, &sta);
+	if (!tid_tx)
+		goto out;
+
+	set_bit(HT_AGG_STATE_STOP_CB, &tid_tx->state);
+	ieee80211_queue_work(&local->hw, &sta->ampdu_mlme.work);
+ out:
+	rcu_read_unlock();
+}
+EXPORT_SYMBOL(ieee80211_stop_tx_ba_cb_irqsafe);
+
+
+void ieee80211_process_addba_resp(struct ieee80211_local *local,
+				  struct sta_info *sta,
+				  struct ieee80211_mgmt *mgmt,
+				  size_t len)
+{
+	struct tid_ampdu_tx *tid_tx;
+	struct ieee80211_txq *txq;
+	u16 capab, tid, buf_size;
+	bool amsdu;
+
+	capab = le16_to_cpu(mgmt->u.action.u.addba_resp.capab);
+	amsdu = capab & IEEE80211_ADDBA_PARAM_AMSDU_MASK;
+	tid = (capab & IEEE80211_ADDBA_PARAM_TID_MASK) >> 2;
+	buf_size = (capab & IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK) >> 6;
+	buf_size = min(buf_size, local->hw.max_tx_aggregation_subframes);
+
+	txq = sta->sta.txq[tid];
+	if (!amsdu && txq)
+		set_bit(IEEE80211_TXQ_NO_AMSDU, &to_txq_info(txq)->flags);
+
+	mutex_lock(&sta->ampdu_mlme.mtx);
+
+	tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
+	if (!tid_tx)
+		goto out;
+
+	if (mgmt->u.action.u.addba_resp.dialog_token != tid_tx->dialog_token) {
+		ht_dbg(sta->sdata, "wrong addBA response token, %pM tid %d\n",
+		       sta->sta.addr, tid);
+		goto out;
+	}
+
+	del_timer_sync(&tid_tx->addba_resp_timer);
+
+	ht_dbg(sta->sdata, "switched off addBA timer for %pM tid %d\n",
+	       sta->sta.addr, tid);
+
+	/*
+	 * addba_resp_timer may have fired before we got here, and
+	 * caused WANT_STOP to be set. If the stop then was already
+	 * processed further, STOPPING might be set.
+	 */
+	if (test_bit(HT_AGG_STATE_WANT_STOP, &tid_tx->state) ||
+	    test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) {
+		ht_dbg(sta->sdata,
+		       "got addBA resp for %pM tid %d but we already gave up\n",
+		       sta->sta.addr, tid);
+		goto out;
+	}
+
+	/*
+	 * IEEE 802.11-2007 7.3.1.14:
+	 * In an ADDBA Response frame, when the Status Code field
+	 * is set to 0, the Buffer Size subfield is set to a value
+	 * of at least 1.
+	 */
+	if (le16_to_cpu(mgmt->u.action.u.addba_resp.status)
+			== WLAN_STATUS_SUCCESS && buf_size) {
+		if (test_and_set_bit(HT_AGG_STATE_RESPONSE_RECEIVED,
+				     &tid_tx->state)) {
+			/* ignore duplicate response */
+			goto out;
+		}
+
+		tid_tx->buf_size = buf_size;
+		tid_tx->amsdu = amsdu;
+
+		if (test_bit(HT_AGG_STATE_DRV_READY, &tid_tx->state))
+			ieee80211_agg_tx_operational(local, sta, tid);
+
+		sta->ampdu_mlme.addba_req_num[tid] = 0;
+
+		tid_tx->timeout =
+			le16_to_cpu(mgmt->u.action.u.addba_resp.timeout);
+
+		if (tid_tx->timeout) {
+			mod_timer(&tid_tx->session_timer,
+				  TU_TO_EXP_TIME(tid_tx->timeout));
+			tid_tx->last_tx = jiffies;
+		}
+
+	} else {
+		___ieee80211_stop_tx_ba_session(sta, tid, AGG_STOP_DECLINED);
+	}
+
+ out:
+	mutex_unlock(&sta->ampdu_mlme.mtx);
+}