diff options
Diffstat (limited to 'Documentation/devicetree/bindings/mailbox/meson-mhu.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/mailbox/meson-mhu.txt | 34 |
1 files changed, 34 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/mailbox/meson-mhu.txt b/Documentation/devicetree/bindings/mailbox/meson-mhu.txt new file mode 100644 index 000000000..a53031077 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/meson-mhu.txt @@ -0,0 +1,34 @@ +Amlogic Meson MHU Mailbox Driver +================================ + +The Amlogic's Meson SoCs Message-Handling-Unit (MHU) is a mailbox controller +that has 3 independent channels/links to communicate with remote processor(s). +MHU links are hardwired on a platform. A link raises interrupt for any +received data. However, there is no specified way of knowing if the sent +data has been read by the remote. This driver assumes the sender polls +STAT register and the remote clears it after having read the data. + +Mailbox Device Node: +==================== + +Required properties: +-------------------- +- compatible: Shall be "amlogic,meson-gxbb-mhu" +- reg: Contains the mailbox register address range (base + address and length) +- #mbox-cells Shall be 1 - the index of the channel needed. +- interrupts: Contains the interrupt information corresponding to + each of the 2 links of MHU. + +Example: +-------- + + mailbox: mailbox@c883c404 { + #mbox-cells = <1>; + compatible = "amlogic,meson-gxbb-mhu"; + reg = <0 0xc883c404 0 0x4c>; + interrupts = <0 208 IRQ_TYPE_EDGE_RISING>, + <0 209 IRQ_TYPE_EDGE_RISING>, + <0 210 IRQ_TYPE_EDGE_RISING>; + #mbox-cells = <1>; + }; |