1 files changed, 39 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/power/supply/ti,bq24735.txt b/Documentation/devicetree/bindings/power/supply/ti,bq24735.txt
new file mode 100644
index 000000000..de45e1a2a
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/ti,bq24735.txt
@@ -0,0 +1,39 @@
+TI BQ24735 Charge Controller
+~~~~~~~~~~
+
+Required properties :
+ - compatible : "ti,bq24735"
+
+Optional properties :
+ - interrupts : Specify the interrupt to be used to trigger when the AC
+   adapter is either plugged in or removed.
+ - ti,ac-detect-gpios : This GPIO is optionally used to read the AC adapter
+   status. This is a Host GPIO that is configured as an input and connected
+   to the ACOK pin on the bq24735. Note: for backwards compatibility reasons,
+   the GPIO must be active on AC adapter absence despite ACOK being active
+   (high) on AC adapter presence.
+ - ti,charge-current : Used to control and set the charging current. This value
+   must be between 128mA and 8.128A with a 64mA step resolution. The POR value
+   is 0x0000h. This number is in mA (e.g. 8192), see spec for more information
+   about the ChargeCurrent (0x14h) register.
+ - ti,charge-voltage : Used to control and set the charging voltage. This value
+   must be between 1.024V and 19.2V with a 16mV step resolution. The POR value
+   is 0x0000h. This number is in mV (e.g. 19200), see spec for more information
+   about the ChargeVoltage (0x15h) register.
+ - ti,input-current : Used to control and set the charger input current. This
+   value must be between 128mA and 8.064A with a 128mA step resolution. The
+   POR value is 0x1000h. This number is in mA (e.g. 8064), see the spec for
+   more information about the InputCurrent (0x3fh) register.
+ - ti,external-control : Indicates that the charger is configured externally
+   and that the host should not attempt to enable/disable charging or set the
+   charge voltage/current.
+ - poll-interval : In case 'interrupts' is not specified, poll AC adapter
+   presence with this interval (milliseconds).
+
+Example:
+
+	bq24735@9 {
+		compatible = "ti,bq24735";
+		reg = <0x9>;
+		ti,ac-detect-gpios = <&gpio 72 0x1>;
+	}