diff options
Diffstat (limited to 'Documentation/media/dvb-drivers')
| -rw-r--r-- | Documentation/media/dvb-drivers/avermedia.rst | 267 | ||||
| -rw-r--r-- | Documentation/media/dvb-drivers/bt8xx.rst | 122 | ||||
| -rw-r--r-- | Documentation/media/dvb-drivers/cards.rst | 144 | ||||
| -rw-r--r-- | Documentation/media/dvb-drivers/ci.rst | 229 | ||||
| -rw-r--r-- | Documentation/media/dvb-drivers/contributors.rst | 129 | ||||
| -rw-r--r-- | Documentation/media/dvb-drivers/dvb-usb.rst | 355 | ||||
| -rw-r--r-- | Documentation/media/dvb-drivers/faq.rst | 167 | ||||
| -rw-r--r-- | Documentation/media/dvb-drivers/frontends.rst | 30 | ||||
| -rw-r--r-- | Documentation/media/dvb-drivers/index.rst | 45 | ||||
| -rw-r--r-- | Documentation/media/dvb-drivers/intro.rst | 21 | ||||
| -rw-r--r-- | Documentation/media/dvb-drivers/lmedm04.rst | 105 | ||||
| -rw-r--r-- | Documentation/media/dvb-drivers/opera-firmware.rst | 31 | ||||
| -rw-r--r-- | Documentation/media/dvb-drivers/technisat.rst | 98 | ||||
| -rw-r--r-- | Documentation/media/dvb-drivers/ttusb-dec.rst | 43 | ||||
| -rw-r--r-- | Documentation/media/dvb-drivers/udev.rst | 61 |
15 files changed, 1847 insertions, 0 deletions
diff --git a/Documentation/media/dvb-drivers/avermedia.rst b/Documentation/media/dvb-drivers/avermedia.rst new file mode 100644 index 000000000..49cd9c935 --- /dev/null +++ b/Documentation/media/dvb-drivers/avermedia.rst @@ -0,0 +1,267 @@ +HOWTO: Get An Avermedia DVB-T working under Linux +------------------------------------------------- + +February 14th 2006 + +.. note:: + + This documentation is outdated. Please check at the DVB wiki + at https://linuxtv.org/wiki for more updated info. + + There's a section there specific for Avermedia boards at: + https://linuxtv.org/wiki/index.php/AVerMedia + + +Assumptions and Introduction +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +It is assumed that the reader understands the basic structure +of the Linux Kernel DVB drivers and the general principles of +Digital TV. + +One significant difference between Digital TV and Analogue TV +that the unwary (like myself) should consider is that, +although the component structure of budget DVB-T cards are +substantially similar to Analogue TV cards, they function in +substantially different ways. + +The purpose of an Analogue TV is to receive and display an +Analogue Television signal. An Analogue TV signal (otherwise +known as composite video) is an analogue encoding of a +sequence of image frames (25 per second) rasterised using an +interlacing technique. Interlacing takes two fields to +represent one frame. Computers today are at their best when +dealing with digital signals, not analogue signals and a +composite video signal is about as far removed from a digital +data stream as you can get. Therefore, an Analogue TV card for +a PC has the following purpose: + +* Tune the receiver to receive a broadcast signal +* demodulate the broadcast signal +* demultiplex the analogue video signal and analogue audio + signal. **NOTE:** some countries employ a digital audio signal + embedded within the modulated composite analogue signal - + NICAM.) +* digitize the analogue video signal and make the resulting + datastream available to the data bus. + +The digital datastream from an Analogue TV card is generated +by circuitry on the card and is often presented uncompressed. +For a PAL TV signal encoded at a resolution of 768x576 24-bit +color pixels over 25 frames per second - a fair amount of data +is generated and must be processed by the PC before it can be +displayed on the video monitor screen. Some Analogue TV cards +for PCs have onboard MPEG2 encoders which permit the raw +digital data stream to be presented to the PC in an encoded +and compressed form - similar to the form that is used in +Digital TV. + +The purpose of a simple budget digital TV card (DVB-T,C or S) +is to simply: + +* Tune the received to receive a broadcast signal. +* Extract the encoded digital datastream from the broadcast + signal. +* Make the encoded digital datastream (MPEG2) available to + the data bus. + +The significant difference between the two is that the tuner +on the analogue TV card spits out an Analogue signal, whereas +the tuner on the digital TV card spits out a compressed +encoded digital datastream. As the signal is already +digitised, it is trivial to pass this datastream to the PC +databus with minimal additional processing and then extract +the digital video and audio datastreams passing them to the +appropriate software or hardware for decoding and viewing. + +The Avermedia DVB-T +~~~~~~~~~~~~~~~~~~~ + +The Avermedia DVB-T is a budget PCI DVB card. It has 3 inputs: + +* RF Tuner Input +* Composite Video Input (RCA Jack) +* SVIDEO Input (Mini-DIN) + +The RF Tuner Input is the input to the tuner module of the +card. The Tuner is otherwise known as the "Frontend" . The +Frontend of the Avermedia DVB-T is a Microtune 7202D. A timely +post to the linux-dvb mailing list ascertained that the +Microtune 7202D is supported by the sp887x driver which is +found in the dvb-hw CVS module. + +The DVB-T card is based around the BT878 chip which is a very +common multimedia bridge and often found on Analogue TV cards. +There is no on-board MPEG2 decoder, which means that all MPEG2 +decoding must be done in software, or if you have one, on an +MPEG2 hardware decoding card or chipset. + + +Getting the card going +~~~~~~~~~~~~~~~~~~~~~~ + +In order to fire up the card, it is necessary to load a number +of modules from the DVB driver set. Prior to this it will have +been necessary to download these drivers from the linuxtv CVS +server and compile them successfully. + +Depending on the card's feature set, the Device Driver API for +DVB under Linux will expose some of the following device files +in the /dev tree: + +* /dev/dvb/adapter0/audio0 +* /dev/dvb/adapter0/ca0 +* /dev/dvb/adapter0/demux0 +* /dev/dvb/adapter0/dvr0 +* /dev/dvb/adapter0/frontend0 +* /dev/dvb/adapter0/net0 +* /dev/dvb/adapter0/osd0 +* /dev/dvb/adapter0/video0 + +The primary device nodes that we are interested in (at this +stage) for the Avermedia DVB-T are: + +* /dev/dvb/adapter0/dvr0 +* /dev/dvb/adapter0/frontend0 + +The dvr0 device node is used to read the MPEG2 Data Stream and +the frontend0 node is used to tune the frontend tuner module. + +At this stage, it has not been able to ascertain the +functionality of the remaining device nodes in respect of the +Avermedia DVBT. However, full functionality in respect of +tuning, receiving and supplying the MPEG2 data stream is +possible with the currently available versions of the driver. +It may be possible that additional functionality is available +from the card (i.e. viewing the additional analogue inputs +that the card presents), but this has not been tested yet. If +I get around to this, I'll update the document with whatever I +find. + +To power up the card, load the following modules in the +following order: + +* modprobe bttv (normally loaded automatically) +* modprobe dvb-bt8xx (or place dvb-bt8xx in /etc/modules) + +Insertion of these modules into the running kernel will +activate the appropriate DVB device nodes. It is then possible +to start accessing the card with utilities such as scan, tzap, +dvbstream etc. + +The frontend module sp887x.o, requires an external firmware. +Please use the command "get_dvb_firmware sp887x" to download +it. Then copy it to /usr/lib/hotplug/firmware or /lib/firmware/ +(depending on configuration of firmware hotplug). + +Receiving DVB-T in Australia +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +I have no experience of DVB-T in other countries other than +Australia, so I will attempt to explain how it works here in +Melbourne and how this affects the configuration of the DVB-T +card. + +The Digital Broadcasting Australia website has a Reception +locatortool which provides information on transponder channels +and frequencies. My local transmitter happens to be Mount +Dandenong. + +The frequencies broadcast by Mount Dandenong are: + +Table 1. Transponder Frequencies Mount Dandenong, Vic, Aus. +Broadcaster Channel Frequency +ABC VHF 12 226.5 MHz +TEN VHF 11 219.5 MHz +NINE VHF 8 191.625 MHz +SEVEN VHF 6 177.5 MHz +SBS UHF 29 536.5 MHz + +The Scan utility has a set of compiled-in defaults for various +countries and regions, but if they do not suit, or if you have +a pre-compiled scan binary, you can specify a data file on the +command line which contains the transponder frequencies. Here +is a sample file for the above channel transponders: + +:: + + # Data file for DVB scan program + # + # C Frequency SymbolRate FEC QAM + # S Frequency Polarisation SymbolRate FEC + # T Frequency Bandwidth FEC FEC2 QAM Mode Guard Hier + T 226500000 7MHz 2/3 NONE QAM64 8k 1/8 NONE + T 191625000 7MHz 2/3 NONE QAM64 8k 1/8 NONE + T 219500000 7MHz 2/3 NONE QAM64 8k 1/8 NONE + T 177500000 7MHz 2/3 NONE QAM64 8k 1/8 NONE + T 536500000 7MHz 2/3 NONE QAM64 8k 1/8 NONE + +The defaults for the transponder frequency and other +modulation parameters were obtained from www.dba.org.au. + +When Scan runs, it will output channels.conf information for +any channel's transponders which the card's frontend can lock +onto. (i.e. any whose signal is strong enough at your +antenna). + +Here's my channels.conf file for anyone who's interested: + +:: + + ABC HDTV:226500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:2307:0:560 + ABC TV Melbourne:226500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:561 + ABC TV 2:226500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:562 + ABC TV 3:226500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:563 + ABC TV 4:226500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:564 + ABC DiG Radio:226500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:0:2311:566 + TEN Digital:219500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:1585 + TEN Digital 1:219500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:1586 + TEN Digital 2:219500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:1587 + TEN Digital 3:219500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:1588 + TEN Digital:219500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:1589 + TEN Digital 4:219500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:1590 + TEN Digital:219500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:1591 + TEN HD:219500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:514:0:1592 + TEN Digital:219500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:1593 + Nine Digital:191625000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:513:660:1072 + Nine Digital HD:191625000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:0:1073 + Nine Guide:191625000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:514:670:1074 + 7 Digital:177500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:769:770:1328 + 7 Digital 1:177500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:769:770:1329 + 7 Digital 2:177500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:769:770:1330 + 7 Digital 3:177500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:769:770:1331 + 7 HD Digital:177500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:833:834:1332 + 7 Program Guide:177500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:865:866:1334 + SBS HD:536500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:102:103:784 + SBS DIGITAL 1:536500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:161:81:785 + SBS DIGITAL 2:536500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:162:83:786 + SBS EPG:536500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:163:85:787 + SBS RADIO 1:536500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:0:201:798 + SBS RADIO 2:536500000:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_2_3:FEC_2_3:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:0:202:799 + +Known Limitations +~~~~~~~~~~~~~~~~~ + +At present I can say with confidence that the frontend tunes +via /dev/dvb/adapter{x}/frontend0 and supplies an MPEG2 stream +via /dev/dvb/adapter{x}/dvr0. I have not tested the +functionality of any other part of the card yet. I will do so +over time and update this document. + +There are some limitations in the i2c layer due to a returned +error message inconsistency. Although this generates errors in +dmesg and the system logs, it does not appear to affect the +ability of the frontend to function correctly. + +Further Update +~~~~~~~~~~~~~~ + +dvbstream and VideoLAN Client on windows works a treat with +DVB, in fact this is currently serving as my main way of +viewing DVB-T at the moment. Additionally, VLC is happily +decoding HDTV signals, although the PC is dropping the odd +frame here and there - I assume due to processing capability - +as all the decoding is being done under windows in software. + +Many thanks to Nigel Pearson for the updates to this document +since the recent revision of the driver. diff --git a/Documentation/media/dvb-drivers/bt8xx.rst b/Documentation/media/dvb-drivers/bt8xx.rst new file mode 100644 index 000000000..e3e387bdf --- /dev/null +++ b/Documentation/media/dvb-drivers/bt8xx.rst @@ -0,0 +1,122 @@ +How to get the bt8xx cards working +================================== + +Authors: Richard Walker, + Jamie Honan, + Michael Hunold, + Manu Abraham, + Uwe Bugla, + Michael Krufky + +.. note:: + + This documentation is outdated. Please check at the DVB wiki + at https://linuxtv.org/wiki for more updated info. + +General information +------------------- + +This class of cards has a bt878a as the PCI interface, and require the bttv driver +for accessing the i2c bus and the gpio pins of the bt8xx chipset. +Please see Documentation/media/dvb-drivers/cards.rst => o Cards based on the Conexant Bt8xx PCI bridge: + +Compiling kernel please enable: + +#) ``Device drivers`` => ``Multimedia devices`` => ``Video For Linux`` => ``Enable Video for Linux API 1 (DEPRECATED)`` +#) ``Device drivers`` => ``Multimedia devices`` => ``Video For Linux`` => ``Video Capture Adapters`` => ``BT848 Video For Linux`` +#) ``Device drivers`` => ``Multimedia devices`` => ``Digital Video Broadcasting Devices`` => ``DVB for Linux`` ``DVB Core Support`` ``Bt8xx based PCI Cards`` + + Please use the following options with care as deselection of drivers which are in fact necessary may result in DVB devices that cannot be tuned due to lack of driver support: + You can save RAM by deselecting every frontend module that your DVB card does not need. + + First please remove the static dependency of DVB card drivers on all frontend modules for all possible card variants by enabling: + +#) ``Device drivers`` => ``Multimedia devices`` => ``Digital Video Broadcasting Devices`` => ``DVB for Linux`` ``DVB Core Support`` ``Load and attach frontend modules as needed`` + + If you know the frontend driver that your card needs please enable: + +#) ``Device drivers`` => ``Multimedia devices`` => ``Digital Video Broadcasting Devices`` => ``DVB for Linux`` ``DVB Core Support`` ``Customise DVB Frontends`` => ``Customise the frontend modules to build`` + + Then please select your card-specific frontend module. + +Loading Modules +--------------- + +Regular case: If the bttv driver detects a bt8xx-based DVB card, all frontend and backend modules will be loaded automatically. +Exceptions are: +- Old TwinHan DST cards or clones with or without CA slot and not containing an Eeprom. +People running udev please see Documentation/media/dvb-drivers/udev.rst. + +In the following cases overriding the PCI type detection for dvb-bt8xx might be necessary: + +Running TwinHan and Clones +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +.. code-block:: none + + $ modprobe bttv card=113 + $ modprobe dst + +Useful parameters for verbosity level and debugging the dst module: + +.. code-block:: none + + verbose=0: messages are disabled + 1: only error messages are displayed + 2: notifications are displayed + 3: other useful messages are displayed + 4: debug setting + dst_addons=0: card is a free to air (FTA) card only + 0x20: card has a conditional access slot for scrambled channels + +The autodetected values are determined by the cards' "response string". +In your logs see f. ex.: dst_get_device_id: Recognize [DSTMCI]. +For bug reports please send in a complete log with verbose=4 activated. +Please also see Documentation/media/dvb-drivers/ci.rst. + +Running multiple cards +~~~~~~~~~~~~~~~~~~~~~~ + +Examples of card ID's: + +.. code-block:: none + + Pinnacle PCTV Sat: 94 + Nebula Electronics Digi TV: 104 + pcHDTV HD-2000 TV: 112 + Twinhan DST and clones: 113 + Avermedia AverTV DVB-T 771: 123 + Avermedia AverTV DVB-T 761: 124 + DViCO FusionHDTV DVB-T Lite: 128 + DViCO FusionHDTV 5 Lite: 135 + +.. note:: + + The order of the card ID should be uprising: + + Example: + + .. code-block:: none + + $ modprobe bttv card=113 card=135 + +For a full list of card ID's please see Documentation/media/v4l-drivers/bttv-cardlist.rst. +In case of further problems please subscribe and send questions to the mailing list: linux-dvb@linuxtv.org. + +Probing the cards with broken PCI subsystem ID +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +There are some TwinHan cards that the EEPROM has become corrupted for some +reason. The cards do not have correct PCI subsystem ID. But we can force +probing the cards with broken PCI subsystem ID + +.. code-block:: none + + $ echo 109e 0878 $subvendor $subdevice > \ + /sys/bus/pci/drivers/bt878/new_id + +.. code-block:: none + + 109e: PCI_VENDOR_ID_BROOKTREE + 0878: PCI_DEVICE_ID_BROOKTREE_878 + diff --git a/Documentation/media/dvb-drivers/cards.rst b/Documentation/media/dvb-drivers/cards.rst new file mode 100644 index 000000000..177cbeb2b --- /dev/null +++ b/Documentation/media/dvb-drivers/cards.rst @@ -0,0 +1,144 @@ +Hardware supported by the linuxtv.org DVB drivers +================================================= + +.. note:: + + This documentation is outdated. Please check at the DVB wiki + at https://linuxtv.org/wiki for more updated info. + + Please look at + https://linuxtv.org/wiki/index.php/Hardware_Device_Information + for an updated list of supported cards. + +Generally, the DVB hardware manufacturers frequently change the +frontends (i.e. tuner / demodulator units) used, usually without +changing the product name, revision number or specs. Some cards +are also available in versions with different frontends for +DVB-S/DVB-C/DVB-T. Thus the frontend drivers are listed separately. + +.. note:: + + #) There is no guarantee that every frontend driver works + out of the box with every card, because of different wiring. + + #) The demodulator chips can be used with a variety of + tuner/PLL chips, and not all combinations are supported. Often + the demodulator and tuner/PLL chip are inside a metal box for + shielding, and the whole metal box has its own part number. + + +- Frontends drivers: + + - dvb_dummy_fe: for testing... + + DVB-S: + - ves1x93 : Alps BSRV2 (ves1893 demodulator) and dbox2 (ves1993) + - cx24110 : Conexant HM1221/HM1811 (cx24110 or cx24106 demod, cx24108 PLL) + - grundig_29504-491 : Grundig 29504-491 (Philips TDA8083 demodulator), tsa5522 PLL + - mt312 : Zarlink mt312 or Mitel vp310 demodulator, sl1935 or tsa5059 PLLi, Technisat Sky2Pc with bios Rev. 2.3 + - stv0299 : Alps BSRU6 (tsa5059 PLL), LG TDQB-S00x (tsa5059 PLL), + LG TDQF-S001F (sl1935 PLL), Philips SU1278 (tua6100 PLL), + Philips SU1278SH (tsa5059 PLL), Samsung TBMU24112IMB, Technisat Sky2Pc with bios Rev. 2.6 + + DVB-C: + - ves1820 : various (ves1820 demodulator, sp5659c or spXXXX PLL) + - at76c651 : Atmel AT76c651(B) with DAT7021 PLL + + DVB-T: + - alps_tdlb7 : Alps TDLB7 (sp8870 demodulator, sp5659 PLL) + - alps_tdmb7 : Alps TDMB7 (cx22700 demodulator) + - grundig_29504-401 : Grundig 29504-401 (LSI L64781 demodulator), tsa5060 PLL + - tda1004x : Philips tda10045h (td1344 or tdm1316l PLL) + - nxt6000 : Alps TDME7 (MITEL SP5659 PLL), Alps TDED4 (TI ALP510 PLL), Comtech DVBT-6k07 (SP5730 PLL), (NxtWave Communications NXT6000 demodulator) + - sp887x : Microtune 7202D + - dib3000mb : DiBcom 3000-MB demodulator + + DVB-S/C/T: + - dst : TwinHan DST Frontend + + ATSC: + - nxt200x : Nxtwave NXT2002 & NXT2004 + - or51211 : or51211 based (pcHDTV HD2000 card) + - or51132 : or51132 based (pcHDTV HD3000 card) + - bcm3510 : Broadcom BCM3510 + - lgdt330x : LG Electronics DT3302 & DT3303 + + +- Cards based on the Phillips saa7146 multimedia PCI bridge chip: + + - TI AV7110 based cards (i.e. with hardware MPEG decoder): + - Siemens/Technotrend/Hauppauge PCI DVB card revision 1.1, 1.3, 1.5, 1.6, 2.1 (aka Hauppauge Nexus) + - "budget" cards (i.e. without hardware MPEG decoder): + - Technotrend Budget / Hauppauge WinTV-Nova PCI Cards + - SATELCO Multimedia PCI + - KNC1 DVB-S, Typhoon DVB-S, Terratec Cinergy 1200 DVB-S (no CI support) + - Typhoon DVB-S budget + - Fujitsu-Siemens Activy DVB-S budget card + +- Cards based on the B2C2 Inc. FlexCopII/IIb/III: + + - Technisat SkyStar2 PCI DVB card revision 2.3, 2.6B, 2.6C + +- Cards based on the Conexant Bt8xx PCI bridge: + + - Pinnacle PCTV Sat DVB + - Nebula Electronics DigiTV + - TwinHan DST + - Avermedia DVB-T + - ChainTech digitop DST-1000 DVB-S + - pcHDTV HD-2000 TV + - DViCO FusionHDTV DVB-T Lite + - DViCO FusionHDTV5 Lite + +- Technotrend / Hauppauge DVB USB devices: + + - Nova USB + - DEC 2000-T, 3000-S, 2540-T + +- DiBcom DVB-T USB based devices: + + - Twinhan VisionPlus VisionDTV USB-Ter DVB-T Device + - HAMA DVB-T USB device + - CTS Portable (Chinese Television System) + - KWorld V-Stream XPERT DTV DVB-T USB + - JetWay DTV DVB-T USB + - ADSTech Instant TV DVB-T USB + - Ultima Electronic/Artec T1 USB TVBOX (AN2135 and AN2235) + - Compro Videomate DVB-U2000 - DVB-T USB + - Grandtec USB DVB-T + - Avermedia AverTV DVBT USB + - DiBcom USB DVB-T reference device (non-public) + - Yakumo DVB-T mobile USB2.0 + - DiBcom USB2.0 DVB-T reference device (non-public) + +- Experimental support for the analog module of the Siemens DVB-C PCI card + +- Cards based on the Conexant cx2388x PCI bridge: + + - ADS Tech Instant TV DVB-T PCI + - ATI HDTV Wonder + - digitalnow DNTV Live! DVB-T + - DViCO FusionHDTV DVB-T1 + - DViCO FusionHDTV DVB-T Plus + - DViCO FusionHDTV3 Gold-Q + - DViCO FusionHDTV3 Gold-T + - DViCO FusionHDTV5 Gold + - Hauppauge Nova-T DVB-T + - KWorld/VStream XPert DVB-T + - pcHDTV HD3000 HDTV + - TerraTec Cinergy 1400 DVB-T + - WinFast DTV1000-T + +- Cards based on the Phillips saa7134 PCI bridge: + + - Medion 7134 + - Pinnacle PCTV 300i DVB-T + PAL + - LifeView FlyDVB-T DUO + - Typhoon DVB-T Duo Digital/Analog Cardbus + - Philips TOUGH DVB-T reference design + - Philips EUROPA V3 reference design + - Compro Videomate DVB-T300 + - Compro Videomate DVB-T200 + - AVerMedia AVerTVHD MCE A180 + - KWorld PC150-U ATSC Hybrid + diff --git a/Documentation/media/dvb-drivers/ci.rst b/Documentation/media/dvb-drivers/ci.rst new file mode 100644 index 000000000..87f3748c4 --- /dev/null +++ b/Documentation/media/dvb-drivers/ci.rst @@ -0,0 +1,229 @@ +Digital TV Conditional Access Interface (CI API) +================================================ + + +.. note:: + + This documentation is outdated. + +This document describes the usage of the high level CI API as +in accordance to the Linux DVB API. This is a not a documentation for the, +existing low level CI API. + +.. note:: + + For the Twinhan/Twinhan clones, the dst_ca module handles the CI + hardware handling.This module is loaded automatically if a CI + (Common Interface, that holds the CAM (Conditional Access Module) + is detected. + +ca_zap +~~~~~~ + +A userspace application, like ``ca_zap`` is required to handle encrypted +MPEG-TS streams. + +The ``ca_zap`` userland application is in charge of sending the +descrambling related information to the Conditional Access Module (CAM). + +This application requires the following to function properly as of now. + +a) Tune to a valid channel, with szap. + + eg: $ szap -c channels.conf -r "TMC" -x + +b) a channels.conf containing a valid PMT PID + + eg: TMC:11996:h:0:27500:278:512:650:321 + + here 278 is a valid PMT PID. the rest of the values are the + same ones that szap uses. + +c) after running a szap, you have to run ca_zap, for the + descrambler to function, + + eg: $ ca_zap channels.conf "TMC" + +d) Hopefully enjoy your favourite subscribed channel as you do with + a FTA card. + +.. note:: + + Currently ca_zap, and dst_test, both are meant for demonstration + purposes only, they can become full fledged applications if necessary. + + +Cards that fall in this category +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +At present the cards that fall in this category are the Twinhan and its +clones, these cards are available as VVMER, Tomato, Hercules, Orange and +so on. + +CI modules that are supported +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The CI module support is largely dependent upon the firmware on the cards +Some cards do support almost all of the available CI modules. There is +nothing much that can be done in order to make additional CI modules +working with these cards. + +Modules that have been tested by this driver at present are + +(1) Irdeto 1 and 2 from SCM +(2) Viaccess from SCM +(3) Dragoncam + +The High level CI API +~~~~~~~~~~~~~~~~~~~~~ + +For the programmer +^^^^^^^^^^^^^^^^^^ + +With the High Level CI approach any new card with almost any random +architecture can be implemented with this style, the definitions +inside the switch statement can be easily adapted for any card, thereby +eliminating the need for any additional ioctls. + +The disadvantage is that the driver/hardware has to manage the rest. For +the application programmer it would be as simple as sending/receiving an +array to/from the CI ioctls as defined in the Linux DVB API. No changes +have been made in the API to accommodate this feature. + + +Why the need for another CI interface? +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +This is one of the most commonly asked question. Well a nice question. +Strictly speaking this is not a new interface. + +The CI interface is defined in the DVB API in ca.h as: + +.. code-block:: c + + typedef struct ca_slot_info { + int num; /* slot number */ + + int type; /* CA interface this slot supports */ + #define CA_CI 1 /* CI high level interface */ + #define CA_CI_LINK 2 /* CI link layer level interface */ + #define CA_CI_PHYS 4 /* CI physical layer level interface */ + #define CA_DESCR 8 /* built-in descrambler */ + #define CA_SC 128 /* simple smart card interface */ + + unsigned int flags; + #define CA_CI_MODULE_PRESENT 1 /* module (or card) inserted */ + #define CA_CI_MODULE_READY 2 + } ca_slot_info_t; + +This CI interface follows the CI high level interface, which is not +implemented by most applications. Hence this area is revisited. + +This CI interface is quite different in the case that it tries to +accommodate all other CI based devices, that fall into the other categories. + +This means that this CI interface handles the EN50221 style tags in the +Application layer only and no session management is taken care of by the +application. The driver/hardware will take care of all that. + +This interface is purely an EN50221 interface exchanging APDU's. This +means that no session management, link layer or a transport layer do +exist in this case in the application to driver communication. It is +as simple as that. The driver/hardware has to take care of that. + +With this High Level CI interface, the interface can be defined with the +regular ioctls. + +All these ioctls are also valid for the High level CI interface + +#define CA_RESET _IO('o', 128) +#define CA_GET_CAP _IOR('o', 129, ca_caps_t) +#define CA_GET_SLOT_INFO _IOR('o', 130, ca_slot_info_t) +#define CA_GET_DESCR_INFO _IOR('o', 131, ca_descr_info_t) +#define CA_GET_MSG _IOR('o', 132, ca_msg_t) +#define CA_SEND_MSG _IOW('o', 133, ca_msg_t) +#define CA_SET_DESCR _IOW('o', 134, ca_descr_t) + + +On querying the device, the device yields information thus: + +.. code-block:: none + + CA_GET_SLOT_INFO + ---------------------------- + Command = [info] + APP: Number=[1] + APP: Type=[1] + APP: flags=[1] + APP: CI High level interface + APP: CA/CI Module Present + + CA_GET_CAP + ---------------------------- + Command = [caps] + APP: Slots=[1] + APP: Type=[1] + APP: Descrambler keys=[16] + APP: Type=[1] + + CA_SEND_MSG + ---------------------------- + Descriptors(Program Level)=[ 09 06 06 04 05 50 ff f1] + Found CA descriptor @ program level + + (20) ES type=[2] ES pid=[201] ES length =[0 (0x0)] + (25) ES type=[4] ES pid=[301] ES length =[0 (0x0)] + ca_message length is 25 (0x19) bytes + EN50221 CA MSG=[ 9f 80 32 19 03 01 2d d1 f0 08 01 09 06 06 04 05 50 ff f1 02 e0 c9 00 00 04 e1 2d 00 00] + + +Not all ioctl's are implemented in the driver from the API, the other +features of the hardware that cannot be implemented by the API are achieved +using the CA_GET_MSG and CA_SEND_MSG ioctls. An EN50221 style wrapper is +used to exchange the data to maintain compatibility with other hardware. + +.. code-block:: c + + /* a message to/from a CI-CAM */ + typedef struct ca_msg { + unsigned int index; + unsigned int type; + unsigned int length; + unsigned char msg[256]; + } ca_msg_t; + + +The flow of data can be described thus, + +.. code-block:: none + + App (User) + ----- + parse + | + | + v + en50221 APDU (package) + -------------------------------------- + | | | High Level CI driver + | | | + | v | + | en50221 APDU (unpackage) | + | | | + | | | + | v | + | sanity checks | + | | | + | | | + | v | + | do (H/W dep) | + -------------------------------------- + | Hardware + | + v + + + + +The High Level CI interface uses the EN50221 DVB standard, following a +standard ensures futureproofness. diff --git a/Documentation/media/dvb-drivers/contributors.rst b/Documentation/media/dvb-drivers/contributors.rst new file mode 100644 index 000000000..594975300 --- /dev/null +++ b/Documentation/media/dvb-drivers/contributors.rst @@ -0,0 +1,129 @@ +Contributors +============ + +.. note:: + + This documentation is outdated. There are several other DVB contributors + that aren't listed below. + +Thanks go to the following people for patches and contributions: + +- Michael Hunold <m.hunold@gmx.de> + + - for the initial saa7146 driver and its recent overhaul + +- Christian Theiss + + - for his work on the initial Linux DVB driver + +- Marcus Metzler <mocm@metzlerbros.de> and + Ralph Metzler <rjkm@metzlerbros.de> + + - for their continuing work on the DVB driver + +- Michael Holzt <kju@debian.org> + + - for his contributions to the dvb-net driver + +- Diego Picciani <d.picciani@novacomp.it> + + - for CyberLogin for Linux which allows logging onto EON + (in case you are wondering where CyberLogin is, EON changed its login + procedure and CyberLogin is no longer used.) + +- Martin Schaller <martin@smurf.franken.de> + + - for patching the cable card decoder driver + +- Klaus Schmidinger <Klaus.Schmidinger@cadsoft.de> + + - for various fixes regarding tuning, OSD and CI stuff and his work on VDR + +- Steve Brown <sbrown@cortland.com> + + - for his AFC kernel thread + +- Christoph Martin <martin@uni-mainz.de> + + - for his LIRC infrared handler + +- Andreas Oberritter <obi@linuxtv.org>, + Dennis Noermann <dennis.noermann@noernet.de>, + Felix Domke <tmbinc@elitedvb.net>, + Florian Schirmer <jolt@tuxbox.org>, + Ronny Strutz <3des@elitedvb.de>, + Wolfram Joost <dbox2@frokaschwei.de> + and all the other dbox2 people + + - for many bugfixes in the generic DVB Core, frontend drivers and + their work on the dbox2 port of the DVB driver + +- Oliver Endriss <o.endriss@gmx.de> + + - for many bugfixes + +- Andrew de Quincey <adq_dvb@lidskialf.net> + + - for the tda1004x frontend driver, and various bugfixes + +- Peter Schildmann <peter.schildmann@web.de> + + - for the driver for the Technisat SkyStar2 PCI DVB card + +- Vadim Catana <skystar@moldova.cc>, + Roberto Ragusa <r.ragusa@libero.it> and + Augusto Cardoso <augusto@carhil.net> + + - for all the work for the FlexCopII chipset by B2C2,Inc. + +- Davor Emard <emard@softhome.net> + + - for his work on the budget drivers, the demux code, + the module unloading problems, ... + +- Hans-Frieder Vogt <hfvogt@arcor.de> + + - for his work on calculating and checking the crc's for the + TechnoTrend/Hauppauge DEC driver firmware + +- Michael Dreher <michael@5dot1.de> and + Andreas 'randy' Weinberger + + - for the support of the Fujitsu-Siemens Activy budget DVB-S + +- Kenneth Aafløy <ke-aa@frisurf.no> + + - for adding support for Typhoon DVB-S budget card + +- Ernst Peinlich <e.peinlich@inode.at> + + - for tuning/DiSEqC support for the DEC 3000-s + +- Peter Beutner <p.beutner@gmx.net> + + - for the IR code for the ttusb-dec driver + +- Wilson Michaels <wilsonmichaels@earthlink.net> + + - for the lgdt330x frontend driver, and various bugfixes + +- Michael Krufky <mkrufky@linuxtv.org> + + - for maintaining v4l/dvb inter-tree dependencies + +- Taylor Jacob <rtjacob@earthlink.net> + + - for the nxt2002 frontend driver + +- Jean-Francois Thibert <jeanfrancois@sagetv.com> + + - for the nxt2004 frontend driver + +- Kirk Lapray <kirk.lapray@gmail.com> + + - for the or51211 and or51132 frontend drivers, and + for merging the nxt2002 and nxt2004 modules into a + single nxt200x frontend driver. + +(If you think you should be in this list, but you are not, drop a +line to the DVB mailing list) diff --git a/Documentation/media/dvb-drivers/dvb-usb.rst b/Documentation/media/dvb-drivers/dvb-usb.rst new file mode 100644 index 000000000..eec99cd07 --- /dev/null +++ b/Documentation/media/dvb-drivers/dvb-usb.rst @@ -0,0 +1,355 @@ +Idea behind the dvb-usb-framework +================================= + +.. note:: + + #) This documentation is outdated. Please check at the DVB wiki + at https://linuxtv.org/wiki for more updated info. + + #) **deprecated:** Newer DVB USB drivers should use the dvb-usb-v2 framework. + +In March 2005 I got the new Twinhan USB2.0 DVB-T device. They provided specs +and a firmware. + +Quite keen I wanted to put the driver (with some quirks of course) into dibusb. +After reading some specs and doing some USB snooping, it realized, that the +dibusb-driver would be a complete mess afterwards. So I decided to do it in a +different way: With the help of a dvb-usb-framework. + +The framework provides generic functions (mostly kernel API calls), such as: + +- Transport Stream URB handling in conjunction with dvb-demux-feed-control + (bulk and isoc are supported) +- registering the device for the DVB-API +- registering an I2C-adapter if applicable +- remote-control/input-device handling +- firmware requesting and loading (currently just for the Cypress USB + controllers) +- other functions/methods which can be shared by several drivers (such as + functions for bulk-control-commands) +- TODO: a I2C-chunker. It creates device-specific chunks of register-accesses + depending on length of a register and the number of values that can be + multi-written and multi-read. + +The source code of the particular DVB USB devices does just the communication +with the device via the bus. The connection between the DVB-API-functionality +is done via callbacks, assigned in a static device-description (struct +dvb_usb_device) each device-driver has to have. + +For an example have a look in drivers/media/usb/dvb-usb/vp7045*. + +Objective is to migrate all the usb-devices (dibusb, cinergyT2, maybe the +ttusb; flexcop-usb already benefits from the generic flexcop-device) to use +the dvb-usb-lib. + +TODO: dynamic enabling and disabling of the pid-filter in regard to number of +feeds requested. + +Supported devices +----------------- + +See the LinuxTV DVB Wiki at https://linuxtv.org for a complete list of +cards/drivers/firmwares: +https://linuxtv.org/wiki/index.php/DVB_USB + +0. History & News: + + 2005-06-30 + + - added support for WideView WT-220U (Thanks to Steve Chang) + + 2005-05-30 + + - added basic isochronous support to the dvb-usb-framework + - added support for Conexant Hybrid reference design and Nebula + DigiTV USB + + 2005-04-17 + + - all dibusb devices ported to make use of the dvb-usb-framework + + 2005-04-02 + + - re-enabled and improved remote control code. + + 2005-03-31 + + - ported the Yakumo/Hama/Typhoon DVB-T USB2.0 device to dvb-usb. + + 2005-03-30 + + - first commit of the dvb-usb-module based on the dibusb-source. + First device is a new driver for the + TwinhanDTV Alpha / MagicBox II USB2.0-only DVB-T device. + - (change from dvb-dibusb to dvb-usb) + + 2005-03-28 + + - added support for the AVerMedia AverTV DVB-T USB2.0 device + (Thanks to Glen Harris and Jiun-Kuei Jung, AVerMedia) + + 2005-03-14 + + - added support for the Typhoon/Yakumo/HAMA DVB-T mobile USB2.0 + + 2005-02-11 + + - added support for the KWorld/ADSTech Instant DVB-T USB2.0. + Thanks a lot to Joachim von Caron + + 2005-02-02 + - added support for the Hauppauge Win-TV Nova-T USB2 + + 2005-01-31 + - distorted streaming is gone for USB1.1 devices + + 2005-01-13 + + - moved the mirrored pid_filter_table back to dvb-dibusb + first almost working version for HanfTek UMT-010 + found out, that Yakumo/HAMA/Typhoon are predecessors of the HanfTek UMT-010 + + 2005-01-10 + + - refactoring completed, now everything is very delightful + + - tuner quirks for some weird devices (Artec T1 AN2235 device has sometimes a + Panasonic Tuner assembled). Tunerprobing implemented. + Thanks a lot to Gunnar Wittich. + + 2004-12-29 + + - after several days of struggling around bug of no returning URBs fixed. + + 2004-12-26 + + - refactored the dibusb-driver, splitted into separate files + - i2c-probing enabled + + 2004-12-06 + + - possibility for demod i2c-address probing + - new usb IDs (Compro, Artec) + + 2004-11-23 + + - merged changes from DiB3000MC_ver2.1 + - revised the debugging + - possibility to deliver the complete TS for USB2.0 + + 2004-11-21 + + - first working version of the dib3000mc/p frontend driver. + + 2004-11-12 + + - added additional remote control keys. Thanks to Uwe Hanke. + + 2004-11-07 + + - added remote control support. Thanks to David Matthews. + + 2004-11-05 + + - added support for a new devices (Grandtec/Avermedia/Artec) + - merged my changes (for dib3000mb/dibusb) to the FE_REFACTORING, because it became HEAD + - moved transfer control (pid filter, fifo control) from usb driver to frontend, it seems + better settled there (added xfer_ops-struct) + - created a common files for frontends (mc/p/mb) + + 2004-09-28 + + - added support for a new device (Unknown, vendor ID is Hyper-Paltek) + + 2004-09-20 + + - added support for a new device (Compro DVB-U2000), thanks + to Amaury Demol for reporting + - changed usb TS transfer method (several urbs, stopping transfer + before setting a new pid) + + 2004-09-13 + + - added support for a new device (Artec T1 USB TVBOX), thanks + to Christian Motschke for reporting + + 2004-09-05 + + - released the dibusb device and dib3000mb-frontend driver + (old news for vp7041.c) + + 2004-07-15 + + - found out, by accident, that the device has a TUA6010XS for PLL + + 2004-07-12 + + - figured out, that the driver should also work with the + CTS Portable (Chinese Television System) + + 2004-07-08 + + - firmware-extraction-2.422-problem solved, driver is now working + properly with firmware extracted from 2.422 + - #if for 2.6.4 (dvb), compile issue + - changed firmware handling, see vp7041.txt sec 1.1 + + 2004-07-02 + + - some tuner modifications, v0.1, cleanups, first public + + 2004-06-28 + + - now using the dvb_dmx_swfilter_packets, everything runs fine now + + 2004-06-27 + + - able to watch and switching channels (pre-alpha) + - no section filtering yet + + 2004-06-06 + + - first TS received, but kernel oops :/ + + 2004-05-14 + + - firmware loader is working + + 2004-05-11 + + - start writing the driver + +How to use? +----------- + +Firmware +~~~~~~~~ + +Most of the USB drivers need to download a firmware to the device before start +working. + +Have a look at the Wikipage for the DVB-USB-drivers to find out, which firmware +you need for your device: + +https://linuxtv.org/wiki/index.php/DVB_USB + +Compiling +~~~~~~~~~ + +Since the driver is in the linux kernel, activating the driver in +your favorite config-environment should sufficient. I recommend +to compile the driver as module. Hotplug does the rest. + +If you use dvb-kernel enter the build-2.6 directory run 'make' and 'insmod.sh +load' afterwards. + +Loading the drivers +~~~~~~~~~~~~~~~~~~~ + +Hotplug is able to load the driver, when it is needed (because you plugged +in the device). + +If you want to enable debug output, you have to load the driver manually and +from within the dvb-kernel cvs repository. + +first have a look, which debug level are available: + +.. code-block:: none + + # modinfo dvb-usb + # modinfo dvb-usb-vp7045 + + etc. + +.. code-block:: none + + modprobe dvb-usb debug=<level> + modprobe dvb-usb-vp7045 debug=<level> + etc. + +should do the trick. + +When the driver is loaded successfully, the firmware file was in +the right place and the device is connected, the "Power"-LED should be +turned on. + +At this point you should be able to start a dvb-capable application. I'm use +(t|s)zap, mplayer and dvbscan to test the basics. VDR-xine provides the +long-term test scenario. + +Known problems and bugs +----------------------- + +- Don't remove the USB device while running an DVB application, your system + will go crazy or die most likely. + +Adding support for devices +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +TODO + +USB1.1 Bandwidth limitation +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +A lot of the currently supported devices are USB1.1 and thus they have a +maximum bandwidth of about 5-6 MBit/s when connected to a USB2.0 hub. +This is not enough for receiving the complete transport stream of a +DVB-T channel (which is about 16 MBit/s). Normally this is not a +problem, if you only want to watch TV (this does not apply for HDTV), +but watching a channel while recording another channel on the same +frequency simply does not work very well. This applies to all USB1.1 +DVB-T devices, not just the dvb-usb-devices) + +The bug, where the TS is distorted by a heavy usage of the device is gone +definitely. All dvb-usb-devices I was using (Twinhan, Kworld, DiBcom) are +working like charm now with VDR. Sometimes I even was able to record a channel +and watch another one. + +Comments +~~~~~~~~ + +Patches, comments and suggestions are very very welcome. + +3. Acknowledgements +------------------- + + Amaury Demol (Amaury.Demol@parrot.com) and Francois Kanounnikoff from DiBcom for + providing specs, code and help, on which the dvb-dibusb, dib3000mb and + dib3000mc are based. + + David Matthews for identifying a new device type (Artec T1 with AN2235) + and for extending dibusb with remote control event handling. Thank you. + + Alex Woods for frequently answering question about usb and dvb + stuff, a big thank you. + + Bernd Wagner for helping with huge bug reports and discussions. + + Gunnar Wittich and Joachim von Caron for their trust for providing + root-shells on their machines to implement support for new devices. + + Allan Third and Michael Hutchinson for their help to write the Nebula + digitv-driver. + + Glen Harris for bringing up, that there is a new dibusb-device and Jiun-Kuei + Jung from AVerMedia who kindly provided a special firmware to get the device + up and running in Linux. + + Jennifer Chen, Jeff and Jack from Twinhan for kindly supporting by + writing the vp7045-driver. + + Steve Chang from WideView for providing information for new devices and + firmware files. + + Michael Paxton for submitting remote control keymaps. + + Some guys on the linux-dvb mailing list for encouraging me. + + Peter Schildmann >peter.schildmann-nospam-at-web.de< for his + user-level firmware loader, which saves a lot of time + (when writing the vp7041 driver) + + Ulf Hermenau for helping me out with traditional chinese. + + André Smoktun and Christian Frömmel for supporting me with + hardware and listening to my problems very patiently. diff --git a/Documentation/media/dvb-drivers/faq.rst b/Documentation/media/dvb-drivers/faq.rst new file mode 100644 index 000000000..a8593d379 --- /dev/null +++ b/Documentation/media/dvb-drivers/faq.rst @@ -0,0 +1,167 @@ +FAQ +=== + +.. note:: + + This documentation is outdated. Please check at the DVB wiki + at https://linuxtv.org/wiki for more updated info. + +Some very frequently asked questions about linuxtv-dvb + +1. The signal seems to die a few seconds after tuning. + + It's not a bug, it's a feature. Because the frontends have + significant power requirements (and hence get very hot), they + are powered down if they are unused (i.e. if the frontend device + is closed). The dvb-core.o module parameter "dvb_shutdown_timeout" + allow you to change the timeout (default 5 seconds). Setting the + timeout to 0 disables the timeout feature. + +2. How can I watch TV? + + The driver distribution includes some simple utilities which + are mainly intended for testing and to demonstrate how the + DVB API works. + + Depending on whether you have a DVB-S, DVB-C or DVB-T card, use + apps/szap/szap, czap or tzap. You must supply a channel list + in ~/.[sct]zap/channels.conf. If you are lucky you can just copy + one of the supplied channel lists, or you can create a new one + by running apps/scan/scan. If you run scan on an unknown network + you might have to supply some start data in apps/scan/initial.h. + + If you have a card with a built-in hardware MPEG-decoder the + drivers create a video4linux device (/dev/v4l/video0) which + you can use to watch TV with any v4l application. xawtv is known + to work. Note that you cannot change channels with xawtv, you + have to zap using [sct]zap. If you want a nice application for + TV watching and record/playback, have a look at VDR. + + If your card does not have a hardware MPEG decoder you need + a software MPEG decoder. Mplayer or xine are known to work. + Newsflash: MythTV also has DVB support now. + Note: Only very recent versions of Mplayer and xine can decode. + MPEG2 transport streams (TS) directly. Then, run + '[sct]zap channelname -r' in one xterm, and keep it running, + and start 'mplayer - < /dev/dvb/adapter0/dvr0' or + 'xine stdin://mpeg2 < /dev/dvb/adapter0/dvr0' in a second xterm. + That's all far from perfect, but it seems no one has written + a nice DVB application which includes a builtin software MPEG + decoder yet. + + Newsflash: Newest xine directly supports DVB. Just copy your + channels.conf to ~/.xine and start 'xine dvb://', or select + the DVB button in the xine GUI. Channel switching works using the + numpad pgup/pgdown (NP9 / NP3) keys to scroll through the channel osd + menu and pressing numpad-enter to switch to the selected channel. + + Note: Older versions of xine and mplayer understand MPEG program + streams (PS) only, and can be used in conjunction with the + ts2ps tool from the Metzler Brother's dvb-mpegtools package. + +3. Which other DVB applications exist? + + http://www.cadsoft.de/people/kls/vdr/ + Klaus Schmidinger's Video Disk Recorder + + http://www.metzlerbros.org/dvb/ + Metzler Bros. DVB development; alternate drivers and + DVB utilities, include dvb-mpegtools and tuxzap. + + http://sourceforge.net/projects/dvbtools/ + Dave Chapman's dvbtools package, including + dvbstream and dvbtune + + http://www.linuxdvb.tv/ + Henning Holtschneider's site with many interesting + links and docs + + http://www.dbox2.info/ + LinuxDVB on the dBox2 + + http://www.tuxbox.org/ and http://cvs.tuxbox.org/ + the TuxBox CVS many interesting DVB applications and the dBox2 + DVB source + + https://linuxtv.org/downloads + DVB Swiss Army Knife library and utilities + + http://www.nenie.org/misc/mpsys/ + MPSYS: a MPEG2 system library and tools + + http://mplayerhq.hu/ + mplayer + + http://xine.sourceforge.net/ and http://xinehq.de/ + xine + + http://www.mythtv.org/ + MythTV - analog TV PVR, but now with DVB support, too + (with software MPEG decode) + + http://dvbsnoop.sourceforge.net/ + DVB sniffer program to monitor, analyze, debug, dump + or view dvb/mpeg/dsm-cc/mhp stream information (TS, + PES, SECTION) + +4. Can't get a signal tuned correctly + + If you are using a Technotrend/Hauppauge DVB-C card *without* analog + module, you might have to use module parameter adac=-1 (dvb-ttpci.o). + +5. The dvb_net device doesn't give me any packets at all + + Run tcpdump on the dvb0_0 interface. This sets the interface + into promiscuous mode so it accepts any packets from the PID + you have configured with the dvbnet utility. Check if there + are any packets with the IP addr and MAC addr you have + configured with ifconfig. + + If tcpdump doesn't give you any output, check the statistics + which ifconfig outputs. (Note: If the MAC address is wrong, + dvb_net won't get any input; thus you have to run tcpdump + before checking the statistics.) If there are no packets at + all then maybe the PID is wrong. If there are error packets, + then either the PID is wrong or the stream does not conform to + the MPE standard (EN 301 192, http://www.etsi.org/). You can + use e.g. dvbsnoop for debugging. + +6. The dvb_net device doesn't give me any multicast packets + + Check your routes if they include the multicast address range. + Additionally make sure that "source validation by reversed path + lookup" is disabled: + +.. code-block:: none + + $ "echo 0 > /proc/sys/net/ipv4/conf/dvb0/rp_filter" + +7. What the hell are all those modules that need to be loaded? + + For a dvb-ttpci av7110 based full-featured card the following + modules are loaded: + + - videodev: Video4Linux core module. This is the base module that + gives you access to the "analog" tv picture of the av7110 mpeg2 + decoder. + + - v4l2-common: common functions for Video4Linux-2 drivers + + - v4l1-compat: backward compatibility layer for Video4Linux-1 legacy + applications + + - dvb-core: DVB core module. This provides you with the + /dev/dvb/adapter entries + + - saa7146: SAA7146 core driver. This is need to access any SAA7146 + based card in your system. + + - saa7146_vv: SAA7146 video and vbi functions. These are only needed + for full-featured cards. + + - videobuf-dma-sg: capture helper module for the saa7146_vv driver. This + one is responsible to handle capture buffers. + + - dvb-ttpci: The main driver for AV7110 based, full-featured + DVB-S/C/T cards + diff --git a/Documentation/media/dvb-drivers/frontends.rst b/Documentation/media/dvb-drivers/frontends.rst new file mode 100644 index 000000000..1f5f57989 --- /dev/null +++ b/Documentation/media/dvb-drivers/frontends.rst @@ -0,0 +1,30 @@ +**************** +Frontend drivers +**************** + +Frontend attach headers +*********************** + +.. Keep it on alphabetic order + +.. kernel-doc:: drivers/media/dvb-frontends/a8293.h +.. kernel-doc:: drivers/media/dvb-frontends/af9013.h +.. kernel-doc:: drivers/media/dvb-frontends/ascot2e.h +.. kernel-doc:: drivers/media/dvb-frontends/cxd2820r.h +.. kernel-doc:: drivers/media/dvb-frontends/drxk.h +.. kernel-doc:: drivers/media/dvb-frontends/dvb-pll.h +.. kernel-doc:: drivers/media/dvb-frontends/helene.h +.. kernel-doc:: drivers/media/dvb-frontends/horus3a.h +.. kernel-doc:: drivers/media/dvb-frontends/ix2505v.h +.. kernel-doc:: drivers/media/dvb-frontends/m88ds3103.h +.. kernel-doc:: drivers/media/dvb-frontends/mb86a20s.h +.. kernel-doc:: drivers/media/dvb-frontends/mn88472.h +.. kernel-doc:: drivers/media/dvb-frontends/rtl2830.h +.. kernel-doc:: drivers/media/dvb-frontends/rtl2832.h +.. kernel-doc:: drivers/media/dvb-frontends/rtl2832_sdr.h +.. kernel-doc:: drivers/media/dvb-frontends/stb6000.h +.. kernel-doc:: drivers/media/dvb-frontends/tda10071.h +.. kernel-doc:: drivers/media/dvb-frontends/tda826x.h +.. kernel-doc:: drivers/media/dvb-frontends/zd1301_demod.h +.. kernel-doc:: drivers/media/dvb-frontends/zl10036.h + diff --git a/Documentation/media/dvb-drivers/index.rst b/Documentation/media/dvb-drivers/index.rst new file mode 100644 index 000000000..314e127d8 --- /dev/null +++ b/Documentation/media/dvb-drivers/index.rst @@ -0,0 +1,45 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. include:: <isonum.txt> + +############################################## +Linux Digital TV driver-specific documentation +############################################## + +**Copyright** |copy| 2001-2016 : LinuxTV Developers + +This documentation is free software; you can redistribute it and/or modify it +under the terms of the GNU General Public License as published by the Free +Software Foundation version 2 of the License. + +This program is distributed in the hope that it will be useful, but WITHOUT +ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +more details. + +For more details see the file COPYING in the source distribution of Linux. + +.. only:: html + + .. class:: toc-title + + Table of Contents + +.. toctree:: + :maxdepth: 5 + :numbered: + + intro + avermedia + bt8xx + cards + ci + dvb-usb + faq + lmedm04 + opera-firmware + technisat + ttusb-dec + udev + frontends + contributors diff --git a/Documentation/media/dvb-drivers/intro.rst b/Documentation/media/dvb-drivers/intro.rst new file mode 100644 index 000000000..d6eeb2708 --- /dev/null +++ b/Documentation/media/dvb-drivers/intro.rst @@ -0,0 +1,21 @@ +Introduction +============ + +The main development site and GIT repository for these +drivers is https://linuxtv.org. + +The DVB mailing list linux-dvb is hosted at vger. Please see +http://vger.kernel.org/vger-lists.html#linux-media for details. + +There are also some other old lists hosted at https://linuxtv.org/lists.php. Please check the archive https://linuxtv.org/pipermail/linux-dvb/. + +The media subsystem Wiki is hosted at https://linuxtv.org/wiki/. +Please check it before asking newbie questions on the list. + +API documentation is documented at the Kernel. You'll also find useful +documentation at: https://linuxtv.org/docs.php. + +You may also find useful material at https://linuxtv.org/downloads/. + +In order to get firmware from proprietary drivers, there's a script at +the kernel tree, at scripts/get_dvb_firmware. diff --git a/Documentation/media/dvb-drivers/lmedm04.rst b/Documentation/media/dvb-drivers/lmedm04.rst new file mode 100644 index 000000000..e8913d448 --- /dev/null +++ b/Documentation/media/dvb-drivers/lmedm04.rst @@ -0,0 +1,105 @@ +Firmware files for lmedm04 cards +================================ + +To extract firmware for the DM04/QQBOX you need to copy the +following file(s) to this directory. + +For DM04+/QQBOX LME2510C (Sharp 7395 Tuner) +------------------------------------------- + +The Sharp 7395 driver can be found in windows/system32/drivers + +US2A0D.sys (dated 17 Mar 2009) + + +and run: + +.. code-block:: none + + scripts/get_dvb_firmware lme2510c_s7395 + +will produce dvb-usb-lme2510c-s7395.fw + +An alternative but older firmware can be found on the driver +disk DVB-S_EN_3.5A in BDADriver/driver + +LMEBDA_DVBS7395C.sys (dated 18 Jan 2008) + +and run: + +.. code-block:: none + + ./get_dvb_firmware lme2510c_s7395_old + +will produce dvb-usb-lme2510c-s7395.fw + +The LG firmware can be found on the driver +disk DM04+_5.1A[LG] in BDADriver/driver + +For DM04 LME2510 (LG Tuner) +--------------------------- + +LMEBDA_DVBS.sys (dated 13 Nov 2007) + +and run: + + +.. code-block:: none + + ./get_dvb_firmware lme2510_lg + +will produce dvb-usb-lme2510-lg.fw + + +Other LG firmware can be extracted manually from US280D.sys +only found in windows/system32/drivers + +dd if=US280D.sys ibs=1 skip=42360 count=3924 of=dvb-usb-lme2510-lg.fw + +For DM04 LME2510C (LG Tuner) +---------------------------- + +.. code-block:: none + + dd if=US280D.sys ibs=1 skip=35200 count=3850 of=dvb-usb-lme2510c-lg.fw + + +The Sharp 0194 tuner driver can be found in windows/system32/drivers + +US290D.sys (dated 09 Apr 2009) + +For LME2510 +----------- + +.. code-block:: none + + dd if=US290D.sys ibs=1 skip=36856 count=3976 of=dvb-usb-lme2510-s0194.fw + + +For LME2510C +------------ + + +.. code-block:: none + + dd if=US290D.sys ibs=1 skip=33152 count=3697 of=dvb-usb-lme2510c-s0194.fw + + +The m88rs2000 tuner driver can be found in windows/system32/drivers + +US2B0D.sys (dated 29 Jun 2010) + + +.. code-block:: none + + dd if=US2B0D.sys ibs=1 skip=34432 count=3871 of=dvb-usb-lme2510c-rs2000.fw + +We need to modify id of rs2000 firmware or it will warm boot id 3344:1120. + + +.. code-block:: none + + + echo -ne \\xF0\\x22 | dd conv=notrunc bs=1 count=2 seek=266 of=dvb-usb-lme2510c-rs2000.fw + +Copy the firmware file(s) to /lib/firmware diff --git a/Documentation/media/dvb-drivers/opera-firmware.rst b/Documentation/media/dvb-drivers/opera-firmware.rst new file mode 100644 index 000000000..41236b43c --- /dev/null +++ b/Documentation/media/dvb-drivers/opera-firmware.rst @@ -0,0 +1,31 @@ +Opera firmware +============== + +Author: Marco Gittler <g.marco@freenet.de> + +To extract the firmware for the Opera DVB-S1 USB-Box +you need to copy the files: + +2830SCap2.sys +2830SLoad2.sys + +from the windriver disk into this directory. + +Then run: + +.. code-block:: none + + scripts/get_dvb_firmware opera1 + +and after that you have 2 files: + +dvb-usb-opera-01.fw +dvb-usb-opera1-fpga-01.fw + +in here. + +Copy them into /lib/firmware/ . + +After that the driver can load the firmware +(if you have enabled firmware loading +in kernel config and have hotplug running). diff --git a/Documentation/media/dvb-drivers/technisat.rst b/Documentation/media/dvb-drivers/technisat.rst new file mode 100644 index 000000000..f80f4ecc1 --- /dev/null +++ b/Documentation/media/dvb-drivers/technisat.rst @@ -0,0 +1,98 @@ +How to set up the Technisat/B2C2 Flexcop devices +================================================ + +.. note:: + + This documentation is outdated. + +Author: Uwe Bugla <uwe.bugla@gmx.de> August 2009 + +Find out what device you have +----------------------------- + +Important Notice: The driver does NOT support Technisat USB 2 devices! + +First start your linux box with a shipped kernel: + +.. code-block:: none + + lspci -vvv for a PCI device (lsusb -vvv for an USB device) will show you for example: + 02:0b.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / + Technisat SkyStar2 DVB card (rev 02) + + dmesg | grep frontend may show you for example: + DVB: registering frontend 0 (Conexant CX24123/CX24109)... + +Kernel compilation: +------------------- + +If the Flexcop / Technisat is the only DVB / TV / Radio device in your box +get rid of unnecessary modules and check this one: + +``Multimedia support`` => ``Customise analog and hybrid tuner modules to build`` + +In this directory uncheck every driver which is activated there +(except ``Simple tuner support`` for ATSC 3rd generation only -> see case 9 please). + +Then please activate: + +- Main module part: + + ``Multimedia support`` => ``DVB/ATSC adapters`` => ``Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters`` + + #) => ``Technisat/B2C2 Air/Sky/Cable2PC PCI`` (PCI card) or + #) => ``Technisat/B2C2 Air/Sky/Cable2PC USB`` (USB 1.1 adapter) + and for troubleshooting purposes: + #) => ``Enable debug for the B2C2 FlexCop drivers`` + +- Frontend / Tuner / Demodulator module part: + + ``Multimedia support`` => ``DVB/ATSC adapters`` + => ``Customise the frontend modules to build`` ``Customise DVB frontends`` => + + - SkyStar DVB-S Revision 2.3: + + #) => ``Zarlink VP310/MT312/ZL10313 based`` + #) => ``Generic I2C PLL based tuners`` + + - SkyStar DVB-S Revision 2.6: + + #) => ``ST STV0299 based`` + #) => ``Generic I2C PLL based tuners`` + + - SkyStar DVB-S Revision 2.7: + + #) => ``Samsung S5H1420 based`` + #) => ``Integrant ITD1000 Zero IF tuner for DVB-S/DSS`` + #) => ``ISL6421 SEC controller`` + + - SkyStar DVB-S Revision 2.8: + + #) => ``Conexant CX24123 based`` + #) => ``Conexant CX24113/CX24128 tuner for DVB-S/DSS`` + #) => ``ISL6421 SEC controller`` + + - AirStar DVB-T card: + + #) => ``Zarlink MT352 based`` + #) => ``Generic I2C PLL based tuners`` + + - CableStar DVB-C card: + + #) => ``ST STV0297 based`` + #) => ``Generic I2C PLL based tuners`` + + - AirStar ATSC card 1st generation: + + #) => ``Broadcom BCM3510`` + + - AirStar ATSC card 2nd generation: + + #) => ``NxtWave Communications NXT2002/NXT2004 based`` + #) => ``Generic I2C PLL based tuners`` + + - AirStar ATSC card 3rd generation: + + #) => ``LG Electronics LGDT3302/LGDT3303 based`` + #) ``Multimedia support`` => ``Customise analog and hybrid tuner modules to build`` => ``Simple tuner support`` + diff --git a/Documentation/media/dvb-drivers/ttusb-dec.rst b/Documentation/media/dvb-drivers/ttusb-dec.rst new file mode 100644 index 000000000..84fc2199d --- /dev/null +++ b/Documentation/media/dvb-drivers/ttusb-dec.rst @@ -0,0 +1,43 @@ +TechnoTrend/Hauppauge DEC USB Driver +==================================== + +Driver Status +------------- + +Supported: + + - DEC2000-t + - DEC2450-t + - DEC3000-s + - Video Streaming + - Audio Streaming + - Section Filters + - Channel Zapping + - Hotplug firmware loader + +To Do: + + - Tuner status information + - DVB network interface + - Streaming video PC->DEC + - Conax support for 2450-t + +Getting the Firmware +-------------------- +To download the firmware, use the following commands: + +.. code-block:: none + + scripts/get_dvb_firmware dec2000t + scripts/get_dvb_firmware dec2540t + scripts/get_dvb_firmware dec3000s + + +Hotplug Firmware Loading +------------------------ + +Since 2.6 kernels, the firmware is loaded at the point that the driver module +is loaded. + +Copy the three files downloaded above into the /usr/lib/hotplug/firmware or +/lib/firmware directory (depending on configuration of firmware hotplug). diff --git a/Documentation/media/dvb-drivers/udev.rst b/Documentation/media/dvb-drivers/udev.rst new file mode 100644 index 000000000..7d7d5d821 --- /dev/null +++ b/Documentation/media/dvb-drivers/udev.rst @@ -0,0 +1,61 @@ +UDEV rules for DVB +================== + +.. note:: + + #) This documentation is outdated. Udev on modern distributions auto-detect + the DVB devices. + + #) **TODO:** change this document to explain how to make DVB devices + persistent, as, when a machine has multiple devices, they may be detected + on different orders, which could cause apps that relies on the device + numbers to fail. + +The DVB subsystem currently registers to the sysfs subsystem using the +"class_simple" interface. + +This means that only the basic information like module loading parameters +are presented through sysfs. Other things that might be interesting are +currently **not** available. + +Nevertheless it's now possible to add proper udev rules so that the +DVB device nodes are created automatically. + +We assume that you have udev already up and running and that have been +creating the DVB device nodes manually up to now due to the missing sysfs +support. + +0. Don't forget to disable your current method of creating the +device nodes manually. + +1. Unfortunately, you'll need a helper script to transform the kernel +sysfs device name into the well known dvb adapter / device naming scheme. +The script should be called "dvb.sh" and should be placed into a script +dir where udev can execute it, most likely /etc/udev/scripts/ + +So, create a new file /etc/udev/scripts/dvb.sh and add the following: + +.. code-block:: none + + #!/bin/sh + /bin/echo $1 | /bin/sed -e 's,dvb\([0-9]\)\.\([^0-9]*\)\([0-9]\),dvb/adapter\1/\2\3,' + +Don't forget to make the script executable with "chmod". + +1. You need to create a proper udev rule that will create the device nodes +like you know them. All real distributions out there scan the /etc/udev/rules.d +directory for rule files. The main udev configuration file /etc/udev/udev.conf +will tell you the directory where the rules are, most likely it's /etc/udev/rules.d/ + +Create a new rule file in that directory called "dvb.rule" and add the following line: + +.. code-block:: none + + KERNEL="dvb*", PROGRAM="/etc/udev/scripts/dvb.sh %k", NAME="%c" + +If you want more control over the device nodes (for example a special group membership) +have a look at "man udev". + +For every device that registers to the sysfs subsystem with a "dvb" prefix, +the helper script /etc/udev/scripts/dvb.sh is invoked, which will then +create the proper device node in your /dev/ directory. |