summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/am335x-baltos-ir2110.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/am335x-baltos-ir2110.dts')
-rw-r--r--arch/arm/boot/dts/am335x-baltos-ir2110.dts78
1 files changed, 78 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/am335x-baltos-ir2110.dts b/arch/arm/boot/dts/am335x-baltos-ir2110.dts
new file mode 100644
index 000000000..75de1e723
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-baltos-ir2110.dts
@@ -0,0 +1,78 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * VScom OnRISC
+ * http://www.vscom.de
+ */
+
+/dts-v1/;
+
+#include "am335x-baltos.dtsi"
+#include "am335x-baltos-leds.dtsi"
+
+/ {
+ model = "OnRISC Baltos iR 2110";
+};
+
+&am33xx_pinmux {
+ uart1_pins: pinmux_uart1_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0) /* uart1_rxd */
+ AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE0) /* uart1_txd */
+ AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE0) /* uart1_ctsn */
+ AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn */
+ AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.gpio2[22] DTR */
+ AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.gpio2[23] DSR */
+ AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.gpio2[24] DCD */
+ AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_ac_bias_en.gpio2[25] RI */
+ >;
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+ dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+ dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+ dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+ rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
+
+ status = "okay";
+};
+
+&usb0_phy {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&davinci_mdio {
+ phy0: ethernet-phy@0 {
+ reg = <1>;
+ };
+};
+
+&cpsw_emac0 {
+ phy-mode = "rmii";
+ dual_emac_res_vlan = <1>;
+ phy-handle = <&phy0>;
+};
+
+&cpsw_emac1 {
+ phy-mode = "rgmii-txid";
+ dual_emac_res_vlan = <2>;
+ phy-handle = <&phy1>;
+};
+
+&phy_sel {
+ rmii-clock-ext = <1>;
+};