summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/armada-375-db.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/armada-375-db.dts')
-rw-r--r--arch/arm/boot/dts/armada-375-db.dts182
1 files changed, 182 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts
new file mode 100644
index 000000000..0e679465c
--- /dev/null
+++ b/arch/arm/boot/dts/armada-375-db.dts
@@ -0,0 +1,182 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Marvell Armada 375 evaluation board
+ * (DB-88F6720)
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-375.dtsi"
+
+/ {
+ model = "Marvell Armada 375 Development Board";
+ compatible = "marvell,a375-db", "marvell,armada375";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x40000000>; /* 1 GB */
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x09) 0 0xf1100000 0x10000
+ MBUS_ID(0x09, 0x05) 0 0xf1110000 0x10000>;
+
+ };
+};
+&pciec {
+ status = "okay";
+};
+
+/*
+ * The two PCIe units are accessible through
+ * standard PCIe slots on the board.
+ */
+&pcie0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+};
+
+&pcie1 {
+ /* Port 1, Lane 0 */
+ status = "okay";
+};
+
+
+&spi0 {
+ pinctrl-0 = <&spi0_pins>;
+ pinctrl-names = "default";
+
+ /*
+ * SPI conflicts with NAND, so we disable it here, and
+ * select NAND as the enabled device by default.
+ */
+
+ status = "disabled";
+
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "n25q128a13", "jedec,spi-nor";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <108000000>;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+ clock-frequency = <100000>;
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <100000>;
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "default";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&pinctrl {
+ sdio_st_pins: sdio-st-pins {
+ marvell,pins = "mpp44", "mpp45";
+ marvell,function = "gpio";
+ };
+};
+
+&sata {
+ status = "okay";
+ nr-ports = <2>;
+};
+
+&nand_controller {
+ status = "okay";
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ nand@0 {
+ reg = <0>;
+ label = "pxa3xx_nand-0";
+ nand-rb = <0>;
+ marvell,nand-keep-config;
+ nand-on-flash-bbt;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0 0x800000>;
+ };
+ partition@800000 {
+ label = "Linux";
+ reg = <0x800000 0x800000>;
+ };
+ partition@1000000 {
+ label = "Filesystem";
+ reg = <0x1000000 0x3f000000>;
+ };
+ };
+ };
+};
+
+&usb1 {
+ status = "okay";
+};
+
+&usb2 {
+ status = "okay";
+};
+
+&sdio {
+ pinctrl-0 = <&sdio_pins &sdio_st_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ cd-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+};
+
+&mdio {
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ phy3: ethernet-phy@3 {
+ reg = <3>;
+ };
+};
+
+&ethernet {
+ status = "okay";
+};
+
+
+&eth0 {
+ status = "okay";
+ phy = <&phy0>;
+ phy-mode = "rgmii-id";
+};
+
+&eth1 {
+ status = "okay";
+ phy = <&phy3>;
+ phy-mode = "gmii";
+};