1 files changed, 200 insertions, 0 deletions
diff --git a/arch/arm/kernel/vmlinux-xip.lds.S b/arch/arm/kernel/vmlinux-xip.lds.S
new file mode 100644
index 000000000..93267800c
--- /dev/null
+++ b/arch/arm/kernel/vmlinux-xip.lds.S
@@ -0,0 +1,200 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* ld script to make ARM Linux kernel
+ * taken from the i386 version by Russell King
+ * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>
+ */
+
+/* No __ro_after_init data in the .rodata section - which will always be ro */
+#define RO_AFTER_INIT_DATA
+
+#include <linux/sizes.h>
+
+#include <asm-generic/vmlinux.lds.h>
+#include <asm/cache.h>
+#include <asm/thread_info.h>
+#include <asm/memory.h>
+#include <asm/mpu.h>
+#include <asm/page.h>
+
+#include "vmlinux.lds.h"
+
+OUTPUT_ARCH(arm)
+ENTRY(stext)
+
+#ifndef __ARMEB__
+jiffies = jiffies_64;
+#else
+jiffies = jiffies_64 + 4;
+#endif
+
+SECTIONS
+{
+	/*
+	 * XXX: The linker does not define how output sections are
+	 * assigned to input sections when there are multiple statements
+	 * matching the same input section name.  There is no documented
+	 * order of matching.
+	 *
+	 * unwind exit sections must be discarded before the rest of the
+	 * unwind sections get included.
+	 */
+	/DISCARD/ : {
+		ARM_DISCARD
+		*(.alt.smp.init)
+		*(.pv_table)
+	}
+
+	. = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR);
+	_xiprom = .;			/* XIP ROM area to be mapped */
+
+	.head.text : {
+		_text = .;
+		HEAD_TEXT
+	}
+
+	.text : {			/* Real text segment		*/
+		_stext = .;		/* Text and read-only data	*/
+		ARM_TEXT
+	}
+
+	RO_DATA(PAGE_SIZE)
+
+	. = ALIGN(4);
+	__ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
+		__start___ex_table = .;
+		ARM_MMU_KEEP(*(__ex_table))
+		__stop___ex_table = .;
+	}
+
+#ifdef CONFIG_ARM_UNWIND
+	ARM_UNWIND_SECTIONS
+#endif
+
+	NOTES
+
+	_etext = .;			/* End of text and rodata section */
+
+	ARM_VECTORS
+	INIT_TEXT_SECTION(8)
+	.exit.text : {
+		ARM_EXIT_KEEP(EXIT_TEXT)
+	}
+	.init.proc.info : {
+		ARM_CPU_DISCARD(PROC_INFO)
+	}
+	.init.arch.info : {
+		__arch_info_begin = .;
+		*(.arch.info.init)
+		__arch_info_end = .;
+	}
+	.init.tagtable : {
+		__tagtable_begin = .;
+		*(.taglist.init)
+		__tagtable_end = .;
+	}
+	.init.rodata : {
+		INIT_SETUP(16)
+		INIT_CALLS
+		CON_INITCALL
+		SECURITY_INITCALL
+		INIT_RAM_FS
+	}
+
+#ifdef CONFIG_ARM_MPU
+	. = ALIGN(SZ_128K);
+#endif
+	_exiprom = .;			/* End of XIP ROM area */
+
+/*
+ * From this point, stuff is considered writable and will be copied to RAM
+ */
+	__data_loc = ALIGN(4);		/* location in file */
+	. = PAGE_OFFSET + TEXT_OFFSET;	/* location in memory */
+#undef LOAD_OFFSET
+#define LOAD_OFFSET (PAGE_OFFSET + TEXT_OFFSET - __data_loc)
+
+	. = ALIGN(THREAD_SIZE);
+	_sdata = .;
+	RW_DATA_SECTION(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
+	.data.ro_after_init : AT(ADDR(.data.ro_after_init) - LOAD_OFFSET) {
+		*(.data..ro_after_init)
+	}
+	_edata = .;
+
+	. = ALIGN(PAGE_SIZE);
+	__init_begin = .;
+	.init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
+		INIT_DATA
+	}
+	.exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) {
+		ARM_EXIT_KEEP(EXIT_DATA)
+	}
+#ifdef CONFIG_SMP
+	PERCPU_SECTION(L1_CACHE_BYTES)
+#endif
+
+#ifdef CONFIG_HAVE_TCM
+	ARM_TCM
+#endif
+
+	/*
+	 * End of copied data. We need a dummy section to get its LMA.
+	 * Also located before final ALIGN() as trailing padding is not stored
+	 * in the resulting binary file and useless to copy.
+	 */
+	.data.endmark : AT(ADDR(.data.endmark) - LOAD_OFFSET) { }
+	_edata_loc = LOADADDR(.data.endmark);
+
+	. = ALIGN(PAGE_SIZE);
+	__init_end = .;
+
+	BSS_SECTION(0, 0, 8)
+#ifdef CONFIG_ARM_MPU
+	. = ALIGN(PMSAv8_MINALIGN);
+#endif
+	_end = .;
+
+	STABS_DEBUG
+}
+
+/*
+ * These must never be empty
+ * If you have to comment these two assert statements out, your
+ * binutils is too old (for other reasons as well)
+ */
+ASSERT((__proc_info_end - __proc_info_begin), "missing CPU support")
+ASSERT((__arch_info_end - __arch_info_begin), "no machine record defined")
+
+/*
+ * The HYP init code can't be more than a page long,
+ * and should not cross a page boundary.
+ * The above comment applies as well.
+ */
+ASSERT(__hyp_idmap_text_end - (__hyp_idmap_text_start & PAGE_MASK) <= PAGE_SIZE,
+	"HYP init code too big or misaligned")
+
+#ifdef CONFIG_XIP_DEFLATED_DATA
+/*
+ * The .bss is used as a stack area for __inflate_kernel_data() whose stack
+ * frame is 9568 bytes. Make sure it has extra room left.
+ */
+ASSERT((_end - __bss_start) >= 12288, ".bss too small for CONFIG_XIP_DEFLATED_DATA")
+#endif
+
+#if defined(CONFIG_ARM_MPU) && !defined(CONFIG_COMPILE_TEST)
+/*
+ * Due to PMSAv7 restriction on base address and size we have to
+ * enforce minimal alignment restrictions. It was seen that weaker
+ * alignment restriction on _xiprom will likely force XIP address
+ * space spawns multiple MPU regions thus it is likely we run in
+ * situation when we are reprogramming MPU region we run on with
+ * something which doesn't cover reprogramming code itself, so as soon
+ * as we update MPU settings we'd immediately try to execute straight
+ * from background region which is XN.
+ * It seem that alignment in 1M should suit most users.
+ * _exiprom is aligned as 1/8 of 1M so can be covered by subregion
+ * disable
+ */
+ASSERT(!(_xiprom & (SZ_1M - 1)), "XIP start address may cause MPU programming issues")
+ASSERT(!(_exiprom & (SZ_128K - 1)), "XIP end address may cause MPU programming issues")
+#endif