diff options
Diffstat (limited to 'arch/m68k/Kconfig.cpu')
| -rw-r--r-- | arch/m68k/Kconfig.cpu | 507 |
1 files changed, 507 insertions, 0 deletions
diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu new file mode 100644 index 000000000..b2fd1e2fb --- /dev/null +++ b/arch/m68k/Kconfig.cpu @@ -0,0 +1,507 @@ +# SPDX-License-Identifier: GPL-2.0 +comment "Processor Type" + +choice + prompt "CPU family support" + default M68KCLASSIC if MMU + default COLDFIRE if !MMU + help + The Freescale (was Motorola) M68K family of processors implements + the full 68000 processor instruction set. + The Freescale ColdFire family of processors is a modern derivative + of the 68000 processor family. They are mainly targeted at embedded + applications, and are all System-On-Chip (SOC) devices, as opposed + to stand alone CPUs. They implement a subset of the original 68000 + processor instruction set. + If you anticipate running this kernel on a computer with a classic + MC68xxx processor, select M68KCLASSIC. + If you anticipate running this kernel on a computer with a ColdFire + processor, select COLDFIRE. + +config M68KCLASSIC + bool "Classic M68K CPU family support" + +config COLDFIRE + bool "Coldfire CPU family support" + select ARCH_HAVE_CUSTOM_GPIO_H + select CPU_HAS_NO_BITFIELDS + select CPU_HAS_NO_MULDIV64 + select GENERIC_CSUM + select GPIOLIB + select HAVE_CLK + +endchoice + +if M68KCLASSIC + +config M68000 + bool "MC68000" + depends on !MMU + select CPU_HAS_NO_BITFIELDS + select CPU_HAS_NO_MULDIV64 + select CPU_HAS_NO_UNALIGNED + select GENERIC_CSUM + select CPU_NO_EFFICIENT_FFS + select HAVE_ARCH_HASH + help + The Freescale (was Motorola) 68000 CPU is the first generation of + the well known M68K family of processors. The CPU core as well as + being available as a stand alone CPU was also used in many + System-On-Chip devices (eg 68328, 68302, etc). It does not contain + a paging MMU. + +config MCPU32 + bool + select CPU_HAS_NO_BITFIELDS + select CPU_HAS_NO_UNALIGNED + select CPU_NO_EFFICIENT_FFS + help + The Freescale (was then Motorola) CPU32 is a CPU core that is + based on the 68020 processor. For the most part it is used in + System-On-Chip parts, and does not contain a paging MMU. + +config M68020 + bool "68020 support" + depends on MMU + select FPU + select CPU_HAS_ADDRESS_SPACES + help + If you anticipate running this kernel on a computer with a MC68020 + processor, say Y. Otherwise, say N. Note that the 68020 requires a + 68851 MMU (Memory Management Unit) to run Linux/m68k, except on the + Sun 3, which provides its own version. + +config M68030 + bool "68030 support" + depends on MMU && !MMU_SUN3 + select FPU + select CPU_HAS_ADDRESS_SPACES + help + If you anticipate running this kernel on a computer with a MC68030 + processor, say Y. Otherwise, say N. Note that a MC68EC030 will not + work, as it does not include an MMU (Memory Management Unit). + +config M68040 + bool "68040 support" + depends on MMU && !MMU_SUN3 + select FPU + select CPU_HAS_ADDRESS_SPACES + help + If you anticipate running this kernel on a computer with a MC68LC040 + or MC68040 processor, say Y. Otherwise, say N. Note that an + MC68EC040 will not work, as it does not include an MMU (Memory + Management Unit). + +config M68060 + bool "68060 support" + depends on MMU && !MMU_SUN3 + select FPU + select CPU_HAS_ADDRESS_SPACES + help + If you anticipate running this kernel on a computer with a MC68060 + processor, say Y. Otherwise, say N. + +config M68328 + bool "MC68328" + depends on !MMU + select M68000 + help + Motorola 68328 processor support. + +config M68EZ328 + bool "MC68EZ328" + depends on !MMU + select M68000 + help + Motorola 68EX328 processor support. + +config M68VZ328 + bool "MC68VZ328" + depends on !MMU + select M68000 + help + Motorola 68VZ328 processor support. + +endif # M68KCLASSIC + +if COLDFIRE + +choice + prompt "ColdFire SoC type" + default M520x + help + Select the type of ColdFire System-on-Chip (SoC) that you want + to build for. + +config M5206 + bool "MCF5206" + depends on !MMU + select COLDFIRE_SW_A7 + select HAVE_MBAR + select CPU_NO_EFFICIENT_FFS + help + Motorola ColdFire 5206 processor support. + +config M5206e + bool "MCF5206e" + depends on !MMU + select COLDFIRE_SW_A7 + select HAVE_MBAR + select CPU_NO_EFFICIENT_FFS + help + Motorola ColdFire 5206e processor support. + +config M520x + bool "MCF520x" + depends on !MMU + select GENERIC_CLOCKEVENTS + select HAVE_CACHE_SPLIT + help + Freescale Coldfire 5207/5208 processor support. + +config M523x + bool "MCF523x" + depends on !MMU + select GENERIC_CLOCKEVENTS + select HAVE_CACHE_SPLIT + select HAVE_IPSBAR + help + Freescale Coldfire 5230/1/2/4/5 processor support + +config M5249 + bool "MCF5249" + depends on !MMU + select COLDFIRE_SW_A7 + select HAVE_MBAR + select CPU_NO_EFFICIENT_FFS + help + Motorola ColdFire 5249 processor support. + +config M525x + bool "MCF525x" + depends on !MMU + select COLDFIRE_SW_A7 + select HAVE_MBAR + select CPU_NO_EFFICIENT_FFS + help + Freescale (Motorola) Coldfire 5251/5253 processor support. + +config M5271 + bool "MCF5271" + depends on !MMU + select M527x + select HAVE_CACHE_SPLIT + select HAVE_IPSBAR + select GENERIC_CLOCKEVENTS + help + Freescale (Motorola) ColdFire 5270/5271 processor support. + +config M5272 + bool "MCF5272" + depends on !MMU + select COLDFIRE_SW_A7 + select HAVE_MBAR + select CPU_NO_EFFICIENT_FFS + help + Motorola ColdFire 5272 processor support. + +config M5275 + bool "MCF5275" + depends on !MMU + select M527x + select HAVE_CACHE_SPLIT + select HAVE_IPSBAR + select GENERIC_CLOCKEVENTS + help + Freescale (Motorola) ColdFire 5274/5275 processor support. + +config M528x + bool "MCF528x" + depends on !MMU + select GENERIC_CLOCKEVENTS + select HAVE_CACHE_SPLIT + select HAVE_IPSBAR + help + Motorola ColdFire 5280/5282 processor support. + +config M5307 + bool "MCF5307" + depends on !MMU + select COLDFIRE_SW_A7 + select HAVE_CACHE_CB + select HAVE_MBAR + select CPU_NO_EFFICIENT_FFS + help + Motorola ColdFire 5307 processor support. + +config M532x + bool "MCF532x" + depends on !MMU + select M53xx + select HAVE_CACHE_CB + help + Freescale (Motorola) ColdFire 532x processor support. + +config M537x + bool "MCF537x" + depends on !MMU + select M53xx + select HAVE_CACHE_CB + help + Freescale ColdFire 537x processor support. + +config M5407 + bool "MCF5407" + depends on !MMU + select COLDFIRE_SW_A7 + select HAVE_CACHE_CB + select HAVE_MBAR + select CPU_NO_EFFICIENT_FFS + help + Motorola ColdFire 5407 processor support. + +config M547x + bool "MCF547x" + select M54xx + select MMU_COLDFIRE if MMU + select FPU if MMU + select HAVE_CACHE_CB + select HAVE_MBAR + select CPU_NO_EFFICIENT_FFS + help + Freescale ColdFire 5470/5471/5472/5473/5474/5475 processor support. + +config M548x + bool "MCF548x" + select MMU_COLDFIRE if MMU + select FPU if MMU + select M54xx + select HAVE_CACHE_CB + select HAVE_MBAR + select CPU_NO_EFFICIENT_FFS + help + Freescale ColdFire 5480/5481/5482/5483/5484/5485 processor support. + +config M5441x + bool "MCF5441x" + select MMU_COLDFIRE if MMU + select GENERIC_CLOCKEVENTS + select HAVE_CACHE_CB + help + Freescale Coldfire 54410/54415/54416/54417/54418 processor support. + +endchoice + +config M527x + bool + +config M53xx + bool + +config M54xx + bool + +endif # COLDFIRE + + +comment "Processor Specific Options" + +config M68KFPU_EMU + bool "Math emulation support" + depends on M68KCLASSIC && FPU + help + At some point in the future, this will cause floating-point math + instructions to be emulated by the kernel on machines that lack a + floating-point math coprocessor. Thrill-seekers and chronically + sleep-deprived psychotic hacker types can say Y now, everyone else + should probably wait a while. + +config M68KFPU_EMU_EXTRAPREC + bool "Math emulation extra precision" + depends on M68KFPU_EMU + help + The fpu uses normally a few bit more during calculations for + correct rounding, the emulator can (often) do the same but this + extra calculation can cost quite some time, so you can disable + it here. The emulator will then "only" calculate with a 64 bit + mantissa and round slightly incorrect, what is more than enough + for normal usage. + +config M68KFPU_EMU_ONLY + bool "Math emulation only kernel" + depends on M68KFPU_EMU + help + This option prevents any floating-point instructions from being + compiled into the kernel, thereby the kernel doesn't save any + floating point context anymore during task switches, so this + kernel will only be usable on machines without a floating-point + math coprocessor. This makes the kernel a bit faster as no tests + needs to be executed whether a floating-point instruction in the + kernel should be executed or not. + +config ADVANCED + bool "Advanced configuration options" + depends on MMU + ---help--- + This gives you access to some advanced options for the CPU. The + defaults should be fine for most users, but these options may make + it possible for you to improve performance somewhat if you know what + you are doing. + + Note that the answer to this question won't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about these options. + + Most users should say N to this question. + +config RMW_INSNS + bool "Use read-modify-write instructions" + depends on ADVANCED + ---help--- + This allows to use certain instructions that work with indivisible + read-modify-write bus cycles. While this is faster than the + workaround of disabling interrupts, it can conflict with DMA + ( = direct memory access) on many Amiga systems, and it is also said + to destabilize other machines. It is very likely that this will + cause serious problems on any Amiga or Atari Medusa if set. The only + configuration where it should work are 68030-based Ataris, where it + apparently improves performance. But you've been warned! Unless you + really know what you are doing, say N. Try Y only if you're quite + adventurous. + +config SINGLE_MEMORY_CHUNK + bool "Use one physical chunk of memory only" if ADVANCED && !SUN3 + depends on MMU + default y if SUN3 + select NEED_MULTIPLE_NODES + help + Ignore all but the first contiguous chunk of physical memory for VM + purposes. This will save a few bytes kernel size and may speed up + some operations. Say N if not sure. + +config ARCH_DISCONTIGMEM_ENABLE + def_bool MMU && !SINGLE_MEMORY_CHUNK + +config 060_WRITETHROUGH + bool "Use write-through caching for 68060 supervisor accesses" + depends on ADVANCED && M68060 + ---help--- + The 68060 generally uses copyback caching of recently accessed data. + Copyback caching means that memory writes will be held in an on-chip + cache and only written back to memory some time later. Saying Y + here will force supervisor (kernel) accesses to use writethrough + caching. Writethrough caching means that data is written to memory + straight away, so that cache and memory data always agree. + Writethrough caching is less efficient, but is needed for some + drivers on 68060 based systems where the 68060 bus snooping signal + is hardwired on. The 53c710 SCSI driver is known to suffer from + this problem. + +config M68K_L2_CACHE + bool + depends on MAC + default y + +config NODES_SHIFT + int + default "3" + depends on !SINGLE_MEMORY_CHUNK + +config CPU_HAS_NO_BITFIELDS + bool + +config CPU_HAS_NO_MULDIV64 + bool + +config CPU_HAS_NO_UNALIGNED + bool + +config CPU_HAS_ADDRESS_SPACES + bool + +config FPU + bool + +config COLDFIRE_SW_A7 + bool + +config HAVE_CACHE_SPLIT + bool + +config HAVE_CACHE_CB + bool + +config HAVE_MBAR + bool + +config HAVE_IPSBAR + bool + +config CLOCK_FREQ + int "Set the core clock frequency" + default "25000000" if M5206 + default "54000000" if M5206e + default "166666666" if M520x + default "140000000" if M5249 + default "150000000" if M527x || M523x + default "90000000" if M5307 + default "50000000" if M5407 + default "266000000" if M54xx + default "66666666" + depends on COLDFIRE + help + Define the CPU clock frequency in use. This is the core clock + frequency, it may or may not be the same as the external clock + crystal fitted to your board. Some processors have an internal + PLL and can have their frequency programmed at run time, others + use internal dividers. In general the kernel won't setup a PLL + if it is fitted (there are some exceptions). This value will be + specific to the exact CPU that you are using. + +config OLDMASK + bool "Old mask 5307 (1H55J) silicon" + depends on M5307 + help + Build support for the older revision ColdFire 5307 silicon. + Specifically this is the 1H55J mask revision. + +if HAVE_CACHE_SPLIT +choice + prompt "Split Cache Configuration" + default CACHE_I + +config CACHE_I + bool "Instruction" + help + Use all of the ColdFire CPU cache memory as an instruction cache. + +config CACHE_D + bool "Data" + help + Use all of the ColdFire CPU cache memory as a data cache. + +config CACHE_BOTH + bool "Both" + help + Split the ColdFire CPU cache, and use half as an instruction cache + and half as a data cache. +endchoice +endif + +if HAVE_CACHE_CB +choice + prompt "Data cache mode" + default CACHE_WRITETHRU + +config CACHE_WRITETHRU + bool "Write-through" + help + The ColdFire CPU cache is set into Write-through mode. + +config CACHE_COPYBACK + bool "Copy-back" + help + The ColdFire CPU cache is set into Copy-back mode. +endchoice +endif + |