diff options
Diffstat (limited to 'arch/powerpc/platforms/83xx')
20 files changed, 3267 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig new file mode 100644 index 000000000..071f53b0c --- /dev/null +++ b/arch/powerpc/platforms/83xx/Kconfig @@ -0,0 +1,124 @@ +# SPDX-License-Identifier: GPL-2.0 +menuconfig PPC_83xx + bool "83xx-based boards" + depends on 6xx + select PPC_UDBG_16550 + select PPC_PCI_CHOICE + select FSL_PCI if PCI + select FSL_SOC + select IPIC + +if PPC_83xx + +config MPC830x_RDB + bool "Freescale MPC830x RDB and derivatives" + select DEFAULT_UIMAGE + select PPC_MPC831x + select FSL_GTM + help + This option enables support for the MPC8308 RDB and MPC8308 P1M boards. + +config MPC831x_RDB + bool "Freescale MPC831x RDB" + select DEFAULT_UIMAGE + select PPC_MPC831x + help + This option enables support for the MPC8313 RDB and MPC8315 RDB boards. + +config MPC832x_MDS + bool "Freescale MPC832x MDS" + select DEFAULT_UIMAGE + select PPC_MPC832x + help + This option enables support for the MPC832x MDS evaluation board. + +config MPC832x_RDB + bool "Freescale MPC832x RDB" + select DEFAULT_UIMAGE + select PPC_MPC832x + help + This option enables support for the MPC8323 RDB board. + +config MPC834x_MDS + bool "Freescale MPC834x MDS" + select DEFAULT_UIMAGE + select PPC_MPC834x + help + This option enables support for the MPC 834x MDS evaluation board. + + Be aware that PCI buses can only function when MDS board is plugged + into the PIB (Platform IO Board) board from Freescale which provide + 3 PCI slots. The PIBs PCI initialization is the bootloader's + responsibility. + +config MPC834x_ITX + bool "Freescale MPC834x ITX" + select DEFAULT_UIMAGE + select PPC_MPC834x + help + This option enables support for the MPC 834x ITX evaluation board. + + Be aware that PCI initialization is the bootloader's + responsibility. + +config MPC836x_MDS + bool "Freescale MPC836x MDS" + select DEFAULT_UIMAGE + help + This option enables support for the MPC836x MDS Processor Board. + +config MPC836x_RDK + bool "Freescale/Logic MPC836x RDK" + select DEFAULT_UIMAGE + select FSL_GTM + select FSL_LBC + help + This option enables support for the MPC836x RDK Processor Board, + also known as ZOOM PowerQUICC Kit. + +config MPC837x_MDS + bool "Freescale MPC837x MDS" + select DEFAULT_UIMAGE + select PPC_MPC837x + help + This option enables support for the MPC837x MDS Processor Board. + +config MPC837x_RDB + bool "Freescale MPC837x RDB/WLAN" + select DEFAULT_UIMAGE + select PPC_MPC837x + help + This option enables support for the MPC837x RDB and WLAN Boards. + +config ASP834x + bool "Analogue & Micro ASP 834x" + select PPC_MPC834x + help + This enables support for the Analogue & Micro ASP 83xx + board. + +config KMETER1 + bool "Keymile KMETER1" + select DEFAULT_UIMAGE + select QUICC_ENGINE + help + This enables support for the Keymile KMETER1 board. + + +endif + +# used for usb & gpio +config PPC_MPC831x + bool + +# used for math-emu +config PPC_MPC832x + bool + +# used for usb & gpio +config PPC_MPC834x + bool + +# used for usb & gpio +config PPC_MPC837x + bool diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile new file mode 100644 index 000000000..41cb5f842 --- /dev/null +++ b/arch/powerpc/platforms/83xx/Makefile @@ -0,0 +1,19 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for the PowerPC 83xx linux kernel. +# +obj-y := misc.o usb.o +obj-$(CONFIG_SUSPEND) += suspend.o suspend-asm.o +obj-$(CONFIG_MCU_MPC8349EMITX) += mcu_mpc8349emitx.o +obj-$(CONFIG_MPC830x_RDB) += mpc830x_rdb.o +obj-$(CONFIG_MPC831x_RDB) += mpc831x_rdb.o +obj-$(CONFIG_MPC832x_RDB) += mpc832x_rdb.o +obj-$(CONFIG_MPC834x_MDS) += mpc834x_mds.o +obj-$(CONFIG_MPC834x_ITX) += mpc834x_itx.o +obj-$(CONFIG_MPC836x_MDS) += mpc836x_mds.o +obj-$(CONFIG_MPC836x_RDK) += mpc836x_rdk.o +obj-$(CONFIG_MPC832x_MDS) += mpc832x_mds.o +obj-$(CONFIG_MPC837x_MDS) += mpc837x_mds.o +obj-$(CONFIG_MPC837x_RDB) += mpc837x_rdb.o +obj-$(CONFIG_ASP834x) += asp834x.o +obj-$(CONFIG_KMETER1) += km83xx.o diff --git a/arch/powerpc/platforms/83xx/asp834x.c b/arch/powerpc/platforms/83xx/asp834x.c new file mode 100644 index 000000000..575afd6eb --- /dev/null +++ b/arch/powerpc/platforms/83xx/asp834x.c @@ -0,0 +1,57 @@ +/* + * arch/powerpc/platforms/83xx/asp834x.c + * + * Analogue & Micro ASP8347 board specific routines + * clone of mpc834x_itx + * + * Copyright 2008 Codehermit + * + * Maintainer: Bryan O'Donoghue <bodonoghue@codhermit.ie> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/pci.h> +#include <linux/of_platform.h> + +#include <asm/time.h> +#include <asm/ipic.h> +#include <asm/udbg.h> + +#include "mpc83xx.h" + +/* ************************************************************************ + * + * Setup the architecture + * + */ +static void __init asp834x_setup_arch(void) +{ + mpc83xx_setup_arch(); + mpc834x_usb_cfg(); +} + +machine_device_initcall(asp834x, mpc83xx_declare_of_platform_devices); + +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init asp834x_probe(void) +{ + return of_machine_is_compatible("analogue-and-micro,asp8347e"); +} + +define_machine(asp834x) { + .name = "ASP8347E", + .probe = asp834x_probe, + .setup_arch = asp834x_setup_arch, + .init_IRQ = mpc83xx_ipic_init_IRQ, + .get_irq = ipic_get_irq, + .restart = mpc83xx_restart, + .time_init = mpc83xx_time_init, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/83xx/km83xx.c b/arch/powerpc/platforms/83xx/km83xx.c new file mode 100644 index 000000000..d8642a4af --- /dev/null +++ b/arch/powerpc/platforms/83xx/km83xx.c @@ -0,0 +1,191 @@ +/* + * Copyright 2008-2011 DENX Software Engineering GmbH + * Author: Heiko Schocher <hs@denx.de> + * + * Description: + * Keymile 83xx platform specific routines. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/reboot.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/major.h> +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/seq_file.h> +#include <linux/root_dev.h> +#include <linux/initrd.h> +#include <linux/of_platform.h> +#include <linux/of_device.h> + +#include <linux/atomic.h> +#include <linux/time.h> +#include <linux/io.h> +#include <asm/machdep.h> +#include <asm/ipic.h> +#include <asm/irq.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> +#include <soc/fsl/qe/qe.h> +#include <soc/fsl/qe/qe_ic.h> + +#include "mpc83xx.h" + +#define SVR_REV(svr) (((svr) >> 0) & 0xFFFF) /* Revision field */ + +static void quirk_mpc8360e_qe_enet10(void) +{ + /* + * handle mpc8360E Erratum QE_ENET10: + * RGMII AC values do not meet the specification + */ + uint svid = mfspr(SPRN_SVR); + struct device_node *np_par; + struct resource res; + void __iomem *base; + int ret; + + np_par = of_find_node_by_name(NULL, "par_io"); + if (np_par == NULL) { + pr_warn("%s couldn;t find par_io node\n", __func__); + return; + } + /* Map Parallel I/O ports registers */ + ret = of_address_to_resource(np_par, 0, &res); + if (ret) { + pr_warn("%s couldn;t map par_io registers\n", __func__); + return; + } + + base = ioremap(res.start, res.end - res.start + 1); + + /* + * set output delay adjustments to default values according + * table 5 in Errata Rev. 5, 9/2011: + * + * write 0b01 to UCC1 bits 18:19 + * write 0b01 to UCC2 option 1 bits 4:5 + * write 0b01 to UCC2 option 2 bits 16:17 + */ + clrsetbits_be32((base + 0xa8), 0x0c00f000, 0x04005000); + + /* + * set output delay adjustments to default values according + * table 3-13 in Reference Manual Rev.3 05/2010: + * + * write 0b01 to UCC2 option 2 bits 16:17 + * write 0b0101 to UCC1 bits 20:23 + * write 0b0101 to UCC2 option 1 bits 24:27 + */ + clrsetbits_be32((base + 0xac), 0x0000cff0, 0x00004550); + + if (SVR_REV(svid) == 0x0021) { + /* + * UCC2 option 1: write 0b1010 to bits 24:27 + * at address IMMRBAR+0x14AC + */ + clrsetbits_be32((base + 0xac), 0x000000f0, 0x000000a0); + } else if (SVR_REV(svid) == 0x0020) { + /* + * UCC1: write 0b11 to bits 18:19 + * at address IMMRBAR+0x14A8 + */ + setbits32((base + 0xa8), 0x00003000); + + /* + * UCC2 option 1: write 0b11 to bits 4:5 + * at address IMMRBAR+0x14A8 + */ + setbits32((base + 0xa8), 0x0c000000); + + /* + * UCC2 option 2: write 0b11 to bits 16:17 + * at address IMMRBAR+0x14AC + */ + setbits32((base + 0xac), 0x0000c000); + } + iounmap(base); + of_node_put(np_par); +} + +/* ************************************************************************ + * + * Setup the architecture + * + */ +static void __init mpc83xx_km_setup_arch(void) +{ +#ifdef CONFIG_QUICC_ENGINE + struct device_node *np; +#endif + + mpc83xx_setup_arch(); + +#ifdef CONFIG_QUICC_ENGINE + np = of_find_node_by_name(NULL, "par_io"); + if (np != NULL) { + par_io_init(np); + of_node_put(np); + + for_each_node_by_name(np, "spi") + par_io_of_config(np); + + for_each_node_by_name(np, "ucc") + par_io_of_config(np); + + /* Only apply this quirk when par_io is available */ + np = of_find_compatible_node(NULL, "network", "ucc_geth"); + if (np != NULL) { + quirk_mpc8360e_qe_enet10(); + of_node_put(np); + } + } +#endif /* CONFIG_QUICC_ENGINE */ +} + +machine_device_initcall(mpc83xx_km, mpc83xx_declare_of_platform_devices); + +/* list of the supported boards */ +static char *board[] __initdata = { + "Keymile,KMETER1", + "Keymile,kmpbec8321", + NULL +}; + +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init mpc83xx_km_probe(void) +{ + int i = 0; + + while (board[i]) { + if (of_machine_is_compatible(board[i])) + break; + i++; + } + return (board[i] != NULL); +} + +define_machine(mpc83xx_km) { + .name = "mpc83xx-km-platform", + .probe = mpc83xx_km_probe, + .setup_arch = mpc83xx_km_setup_arch, + .init_IRQ = mpc83xx_ipic_and_qe_init_IRQ, + .get_irq = ipic_get_irq, + .restart = mpc83xx_restart, + .time_init = mpc83xx_time_init, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c b/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c new file mode 100644 index 000000000..d2ef39f0e --- /dev/null +++ b/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c @@ -0,0 +1,238 @@ +/* + * Power Management and GPIO expander driver for MPC8349E-mITX-compatible MCU + * + * Copyright (c) 2008 MontaVista Software, Inc. + * + * Author: Anton Vorontsov <avorontsov@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/mutex.h> +#include <linux/i2c.h> +#include <linux/gpio/driver.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/slab.h> +#include <linux/kthread.h> +#include <linux/reboot.h> +#include <asm/prom.h> +#include <asm/machdep.h> + +/* + * I don't have specifications for the MCU firmware, I found this register + * and bits positions by the trial&error method. + */ +#define MCU_REG_CTRL 0x20 +#define MCU_CTRL_POFF 0x40 +#define MCU_CTRL_BTN 0x80 + +#define MCU_NUM_GPIO 2 + +struct mcu { + struct mutex lock; + struct i2c_client *client; + struct gpio_chip gc; + u8 reg_ctrl; +}; + +static struct mcu *glob_mcu; + +struct task_struct *shutdown_thread; +static int shutdown_thread_fn(void *data) +{ + int ret; + struct mcu *mcu = glob_mcu; + + while (!kthread_should_stop()) { + ret = i2c_smbus_read_byte_data(mcu->client, MCU_REG_CTRL); + if (ret < 0) + pr_err("MCU status reg read failed.\n"); + mcu->reg_ctrl = ret; + + + if (mcu->reg_ctrl & MCU_CTRL_BTN) { + i2c_smbus_write_byte_data(mcu->client, MCU_REG_CTRL, + mcu->reg_ctrl & ~MCU_CTRL_BTN); + + ctrl_alt_del(); + } + + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(HZ); + } + + return 0; +} + +static ssize_t show_status(struct device *d, + struct device_attribute *attr, char *buf) +{ + int ret; + struct mcu *mcu = glob_mcu; + + ret = i2c_smbus_read_byte_data(mcu->client, MCU_REG_CTRL); + if (ret < 0) + return -ENODEV; + mcu->reg_ctrl = ret; + + return sprintf(buf, "%02x\n", ret); +} +static DEVICE_ATTR(status, 0444, show_status, NULL); + +static void mcu_power_off(void) +{ + struct mcu *mcu = glob_mcu; + + pr_info("Sending power-off request to the MCU...\n"); + mutex_lock(&mcu->lock); + i2c_smbus_write_byte_data(mcu->client, MCU_REG_CTRL, + mcu->reg_ctrl | MCU_CTRL_POFF); + mutex_unlock(&mcu->lock); +} + +static void mcu_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val) +{ + struct mcu *mcu = gpiochip_get_data(gc); + u8 bit = 1 << (4 + gpio); + + mutex_lock(&mcu->lock); + if (val) + mcu->reg_ctrl &= ~bit; + else + mcu->reg_ctrl |= bit; + + i2c_smbus_write_byte_data(mcu->client, MCU_REG_CTRL, mcu->reg_ctrl); + mutex_unlock(&mcu->lock); +} + +static int mcu_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) +{ + mcu_gpio_set(gc, gpio, val); + return 0; +} + +static int mcu_gpiochip_add(struct mcu *mcu) +{ + struct device_node *np; + struct gpio_chip *gc = &mcu->gc; + + np = of_find_compatible_node(NULL, NULL, "fsl,mcu-mpc8349emitx"); + if (!np) + return -ENODEV; + + gc->owner = THIS_MODULE; + gc->label = kasprintf(GFP_KERNEL, "%pOF", np); + gc->can_sleep = 1; + gc->ngpio = MCU_NUM_GPIO; + gc->base = -1; + gc->set = mcu_gpio_set; + gc->direction_output = mcu_gpio_dir_out; + gc->of_node = np; + + return gpiochip_add_data(gc, mcu); +} + +static int mcu_gpiochip_remove(struct mcu *mcu) +{ + kfree(mcu->gc.label); + gpiochip_remove(&mcu->gc); + return 0; +} + +static int mcu_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + struct mcu *mcu; + int ret; + + mcu = kzalloc(sizeof(*mcu), GFP_KERNEL); + if (!mcu) + return -ENOMEM; + + mutex_init(&mcu->lock); + mcu->client = client; + i2c_set_clientdata(client, mcu); + + ret = i2c_smbus_read_byte_data(mcu->client, MCU_REG_CTRL); + if (ret < 0) + goto err; + mcu->reg_ctrl = ret; + + ret = mcu_gpiochip_add(mcu); + if (ret) + goto err; + + /* XXX: this is potentially racy, but there is no lock for pm_power_off */ + if (!pm_power_off) { + glob_mcu = mcu; + pm_power_off = mcu_power_off; + dev_info(&client->dev, "will provide power-off service\n"); + } + + if (device_create_file(&client->dev, &dev_attr_status)) + dev_err(&client->dev, + "couldn't create device file for status\n"); + + shutdown_thread = kthread_run(shutdown_thread_fn, NULL, + "mcu-i2c-shdn"); + + return 0; +err: + kfree(mcu); + return ret; +} + +static int mcu_remove(struct i2c_client *client) +{ + struct mcu *mcu = i2c_get_clientdata(client); + int ret; + + kthread_stop(shutdown_thread); + + device_remove_file(&client->dev, &dev_attr_status); + + if (glob_mcu == mcu) { + pm_power_off = NULL; + glob_mcu = NULL; + } + + ret = mcu_gpiochip_remove(mcu); + if (ret) + return ret; + kfree(mcu); + return 0; +} + +static const struct i2c_device_id mcu_ids[] = { + { "mcu-mpc8349emitx", }, + {}, +}; +MODULE_DEVICE_TABLE(i2c, mcu_ids); + +static const struct of_device_id mcu_of_match_table[] = { + { .compatible = "fsl,mcu-mpc8349emitx", }, + { }, +}; + +static struct i2c_driver mcu_driver = { + .driver = { + .name = "mcu-mpc8349emitx", + .of_match_table = mcu_of_match_table, + }, + .probe = mcu_probe, + .remove = mcu_remove, + .id_table = mcu_ids, +}; + +module_i2c_driver(mcu_driver); + +MODULE_DESCRIPTION("Power Management and GPIO expander driver for " + "MPC8349E-mITX-compatible MCU"); +MODULE_AUTHOR("Anton Vorontsov <avorontsov@ru.mvista.com>"); +MODULE_LICENSE("GPL"); diff --git a/arch/powerpc/platforms/83xx/misc.c b/arch/powerpc/platforms/83xx/misc.c new file mode 100644 index 000000000..2b6589fe8 --- /dev/null +++ b/arch/powerpc/platforms/83xx/misc.c @@ -0,0 +1,169 @@ +/* + * misc setup functions for MPC83xx + * + * Maintainer: Kumar Gala <galak@kernel.crashing.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/of_platform.h> +#include <linux/pci.h> + +#include <asm/debug.h> +#include <asm/io.h> +#include <asm/hw_irq.h> +#include <asm/ipic.h> +#include <soc/fsl/qe/qe_ic.h> +#include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> + +#include "mpc83xx.h" + +static __be32 __iomem *restart_reg_base; + +static int __init mpc83xx_restart_init(void) +{ + /* map reset restart_reg_baseister space */ + restart_reg_base = ioremap(get_immrbase() + 0x900, 0xff); + + return 0; +} + +arch_initcall(mpc83xx_restart_init); + +void __noreturn mpc83xx_restart(char *cmd) +{ +#define RST_OFFSET 0x00000900 +#define RST_PROT_REG 0x00000018 +#define RST_CTRL_REG 0x0000001c + + local_irq_disable(); + + if (restart_reg_base) { + /* enable software reset "RSTE" */ + out_be32(restart_reg_base + (RST_PROT_REG >> 2), 0x52535445); + + /* set software hard reset */ + out_be32(restart_reg_base + (RST_CTRL_REG >> 2), 0x2); + } else { + printk (KERN_EMERG "Error: Restart registers not mapped, spinning!\n"); + } + + for (;;) ; +} + +long __init mpc83xx_time_init(void) +{ +#define SPCR_OFFSET 0x00000110 +#define SPCR_TBEN 0x00400000 + __be32 __iomem *spcr = ioremap(get_immrbase() + SPCR_OFFSET, 4); + __be32 tmp; + + tmp = in_be32(spcr); + out_be32(spcr, tmp | SPCR_TBEN); + + iounmap(spcr); + + return 0; +} + +void __init mpc83xx_ipic_init_IRQ(void) +{ + struct device_node *np; + + /* looking for fsl,pq2pro-pic which is asl compatible with fsl,ipic */ + np = of_find_compatible_node(NULL, NULL, "fsl,ipic"); + if (!np) + np = of_find_node_by_type(NULL, "ipic"); + if (!np) + return; + + ipic_init(np, 0); + + of_node_put(np); + + /* Initialize the default interrupt mapping priorities, + * in case the boot rom changed something on us. + */ + ipic_set_default_priority(); +} + +#ifdef CONFIG_QUICC_ENGINE +void __init mpc83xx_qe_init_IRQ(void) +{ + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic"); + if (!np) { + np = of_find_node_by_type(NULL, "qeic"); + if (!np) + return; + } + qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic); + of_node_put(np); +} + +void __init mpc83xx_ipic_and_qe_init_IRQ(void) +{ + mpc83xx_ipic_init_IRQ(); + mpc83xx_qe_init_IRQ(); +} +#endif /* CONFIG_QUICC_ENGINE */ + +static const struct of_device_id of_bus_ids[] __initconst = { + { .type = "soc", }, + { .compatible = "soc", }, + { .compatible = "simple-bus" }, + { .compatible = "gianfar" }, + { .compatible = "gpio-leds", }, + { .type = "qe", }, + { .compatible = "fsl,qe", }, + {}, +}; + +int __init mpc83xx_declare_of_platform_devices(void) +{ + of_platform_bus_probe(NULL, of_bus_ids, NULL); + return 0; +} + +#ifdef CONFIG_PCI +void __init mpc83xx_setup_pci(void) +{ + struct device_node *np; + + for_each_compatible_node(np, "pci", "fsl,mpc8349-pci") + mpc83xx_add_bridge(np); + for_each_compatible_node(np, "pci", "fsl,mpc8314-pcie") + mpc83xx_add_bridge(np); +} +#endif + +void __init mpc83xx_setup_arch(void) +{ + if (ppc_md.progress) + ppc_md.progress("mpc83xx_setup_arch()", 0); + + mpc83xx_setup_pci(); +} + +int machine_check_83xx(struct pt_regs *regs) +{ + u32 mask = 1 << (31 - IPIC_MCP_WDT); + + if (!(regs->msr & SRR1_MCE_MCP) || !(ipic_get_mcp_status() & mask)) + return machine_check_generic(regs); + ipic_clear_mcp_status(mask); + + if (debugger_fault_handler(regs)) + return 1; + + die("Watchdog NMI Reset", regs, 0); + + return 1; +} diff --git a/arch/powerpc/platforms/83xx/mpc830x_rdb.c b/arch/powerpc/platforms/83xx/mpc830x_rdb.c new file mode 100644 index 000000000..272c41c38 --- /dev/null +++ b/arch/powerpc/platforms/83xx/mpc830x_rdb.c @@ -0,0 +1,61 @@ +/* + * arch/powerpc/platforms/83xx/mpc830x_rdb.c + * + * Description: MPC830x RDB board specific routines. + * This file is based on mpc831x_rdb.c + * + * Copyright (C) Freescale Semiconductor, Inc. 2009. All rights reserved. + * Copyright (C) 2010. Ilya Yanok, Emcraft Systems, yanok@emcraft.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/pci.h> +#include <linux/of_platform.h> +#include <asm/time.h> +#include <asm/ipic.h> +#include <asm/udbg.h> +#include <sysdev/fsl_pci.h> +#include <sysdev/fsl_soc.h> +#include "mpc83xx.h" + +/* + * Setup the architecture + */ +static void __init mpc830x_rdb_setup_arch(void) +{ + mpc83xx_setup_arch(); + mpc831x_usb_cfg(); +} + +static const char *board[] __initdata = { + "MPC8308RDB", + "fsl,mpc8308rdb", + "denx,mpc8308_p1m", + NULL +}; + +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init mpc830x_rdb_probe(void) +{ + return of_device_compatible_match(of_root, board); +} + +machine_device_initcall(mpc830x_rdb, mpc83xx_declare_of_platform_devices); + +define_machine(mpc830x_rdb) { + .name = "MPC830x RDB", + .probe = mpc830x_rdb_probe, + .setup_arch = mpc830x_rdb_setup_arch, + .init_IRQ = mpc83xx_ipic_init_IRQ, + .get_irq = ipic_get_irq, + .restart = mpc83xx_restart, + .time_init = mpc83xx_time_init, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/83xx/mpc831x_rdb.c b/arch/powerpc/platforms/83xx/mpc831x_rdb.c new file mode 100644 index 000000000..fd80fd570 --- /dev/null +++ b/arch/powerpc/platforms/83xx/mpc831x_rdb.c @@ -0,0 +1,61 @@ +/* + * arch/powerpc/platforms/83xx/mpc831x_rdb.c + * + * Description: MPC831x RDB board specific routines. + * This file is based on mpc834x_sys.c + * Author: Lo Wlison <r43300@freescale.com> + * + * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/pci.h> +#include <linux/of_platform.h> + +#include <asm/time.h> +#include <asm/ipic.h> +#include <asm/udbg.h> +#include <sysdev/fsl_pci.h> + +#include "mpc83xx.h" + +/* + * Setup the architecture + */ +static void __init mpc831x_rdb_setup_arch(void) +{ + mpc83xx_setup_arch(); + mpc831x_usb_cfg(); +} + +static const char *board[] __initdata = { + "MPC8313ERDB", + "fsl,mpc8315erdb", + NULL +}; + +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init mpc831x_rdb_probe(void) +{ + return of_device_compatible_match(of_root, board); +} + +machine_device_initcall(mpc831x_rdb, mpc83xx_declare_of_platform_devices); + +define_machine(mpc831x_rdb) { + .name = "MPC831x RDB", + .probe = mpc831x_rdb_probe, + .setup_arch = mpc831x_rdb_setup_arch, + .init_IRQ = mpc83xx_ipic_init_IRQ, + .get_irq = ipic_get_irq, + .restart = mpc83xx_restart, + .time_init = mpc83xx_time_init, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c new file mode 100644 index 000000000..74c154e67 --- /dev/null +++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c @@ -0,0 +1,115 @@ +/* + * Copyright 2006 Freescale Semiconductor, Inc. All rights reserved. + * + * Description: + * MPC832xE MDS board specific routines. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/reboot.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/major.h> +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/seq_file.h> +#include <linux/root_dev.h> +#include <linux/initrd.h> +#include <linux/of_platform.h> +#include <linux/of_device.h> + +#include <linux/atomic.h> +#include <asm/time.h> +#include <asm/io.h> +#include <asm/machdep.h> +#include <asm/ipic.h> +#include <asm/irq.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> +#include <soc/fsl/qe/qe.h> +#include <soc/fsl/qe/qe_ic.h> + +#include "mpc83xx.h" + +#undef DEBUG +#ifdef DEBUG +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif + +/* ************************************************************************ + * + * Setup the architecture + * + */ +static void __init mpc832x_sys_setup_arch(void) +{ + struct device_node *np; + u8 __iomem *bcsr_regs = NULL; + + mpc83xx_setup_arch(); + + /* Map BCSR area */ + np = of_find_node_by_name(NULL, "bcsr"); + if (np) { + struct resource res; + + of_address_to_resource(np, 0, &res); + bcsr_regs = ioremap(res.start, resource_size(&res)); + of_node_put(np); + } + +#ifdef CONFIG_QUICC_ENGINE + if ((np = of_find_node_by_name(NULL, "par_io")) != NULL) { + par_io_init(np); + of_node_put(np); + + for_each_node_by_name(np, "ucc") + par_io_of_config(np); + } + + if ((np = of_find_compatible_node(NULL, "network", "ucc_geth")) + != NULL){ + /* Reset the Ethernet PHYs */ +#define BCSR8_FETH_RST 0x50 + clrbits8(&bcsr_regs[8], BCSR8_FETH_RST); + udelay(1000); + setbits8(&bcsr_regs[8], BCSR8_FETH_RST); + iounmap(bcsr_regs); + of_node_put(np); + } +#endif /* CONFIG_QUICC_ENGINE */ +} + +machine_device_initcall(mpc832x_mds, mpc83xx_declare_of_platform_devices); + +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init mpc832x_sys_probe(void) +{ + return of_machine_is_compatible("MPC832xMDS"); +} + +define_machine(mpc832x_mds) { + .name = "MPC832x MDS", + .probe = mpc832x_sys_probe, + .setup_arch = mpc832x_sys_setup_arch, + .init_IRQ = mpc83xx_ipic_and_qe_init_IRQ, + .get_irq = ipic_get_irq, + .restart = mpc83xx_restart, + .time_init = mpc83xx_time_init, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/83xx/mpc832x_rdb.c b/arch/powerpc/platforms/83xx/mpc832x_rdb.c new file mode 100644 index 000000000..438986593 --- /dev/null +++ b/arch/powerpc/platforms/83xx/mpc832x_rdb.c @@ -0,0 +1,233 @@ +/* + * arch/powerpc/platforms/83xx/mpc832x_rdb.c + * + * Copyright (C) Freescale Semiconductor, Inc. 2007. All rights reserved. + * + * Description: + * MPC832x RDB board specific routines. + * This file is based on mpc832x_mds.c and mpc8313_rdb.c + * Author: Michael Barkowski <michael.barkowski@freescale.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/pci.h> +#include <linux/interrupt.h> +#include <linux/spi/spi.h> +#include <linux/spi/mmc_spi.h> +#include <linux/mmc/host.h> +#include <linux/of_platform.h> +#include <linux/fsl_devices.h> + +#include <asm/time.h> +#include <asm/ipic.h> +#include <asm/udbg.h> +#include <soc/fsl/qe/qe.h> +#include <soc/fsl/qe/qe_ic.h> +#include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> + +#include "mpc83xx.h" + +#undef DEBUG +#ifdef DEBUG +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif + +#ifdef CONFIG_QUICC_ENGINE +static int __init of_fsl_spi_probe(char *type, char *compatible, u32 sysclk, + struct spi_board_info *board_infos, + unsigned int num_board_infos, + void (*cs_control)(struct spi_device *dev, + bool on)) +{ + struct device_node *np; + unsigned int i = 0; + + for_each_compatible_node(np, type, compatible) { + int ret; + unsigned int j; + const void *prop; + struct resource res[2]; + struct platform_device *pdev; + struct fsl_spi_platform_data pdata = { + .cs_control = cs_control, + }; + + memset(res, 0, sizeof(res)); + + pdata.sysclk = sysclk; + + prop = of_get_property(np, "reg", NULL); + if (!prop) + goto err; + pdata.bus_num = *(u32 *)prop; + + prop = of_get_property(np, "cell-index", NULL); + if (prop) + i = *(u32 *)prop; + + prop = of_get_property(np, "mode", NULL); + if (prop && !strcmp(prop, "cpu-qe")) + pdata.flags = SPI_QE_CPU_MODE; + + for (j = 0; j < num_board_infos; j++) { + if (board_infos[j].bus_num == pdata.bus_num) + pdata.max_chipselect++; + } + + if (!pdata.max_chipselect) + continue; + + ret = of_address_to_resource(np, 0, &res[0]); + if (ret) + goto err; + + ret = of_irq_to_resource(np, 0, &res[1]); + if (ret <= 0) + goto err; + + pdev = platform_device_alloc("mpc83xx_spi", i); + if (!pdev) + goto err; + + ret = platform_device_add_data(pdev, &pdata, sizeof(pdata)); + if (ret) + goto unreg; + + ret = platform_device_add_resources(pdev, res, + ARRAY_SIZE(res)); + if (ret) + goto unreg; + + ret = platform_device_add(pdev); + if (ret) + goto unreg; + + goto next; +unreg: + platform_device_del(pdev); +err: + pr_err("%pOF: registration failed\n", np); +next: + i++; + } + + return i; +} + +static int __init fsl_spi_init(struct spi_board_info *board_infos, + unsigned int num_board_infos, + void (*cs_control)(struct spi_device *spi, + bool on)) +{ + u32 sysclk = -1; + int ret; + + /* SPI controller is either clocked from QE or SoC clock */ + sysclk = get_brgfreq(); + if (sysclk == -1) { + sysclk = fsl_get_sys_freq(); + if (sysclk == -1) + return -ENODEV; + } + + ret = of_fsl_spi_probe(NULL, "fsl,spi", sysclk, board_infos, + num_board_infos, cs_control); + if (!ret) + of_fsl_spi_probe("spi", "fsl_spi", sysclk, board_infos, + num_board_infos, cs_control); + + return spi_register_board_info(board_infos, num_board_infos); +} + +static void mpc83xx_spi_cs_control(struct spi_device *spi, bool on) +{ + pr_debug("%s %d %d\n", __func__, spi->chip_select, on); + par_io_data_set(3, 13, on); +} + +static struct mmc_spi_platform_data mpc832x_mmc_pdata = { + .ocr_mask = MMC_VDD_33_34, +}; + +static struct spi_board_info mpc832x_spi_boardinfo = { + .bus_num = 0x4c0, + .chip_select = 0, + .max_speed_hz = 50000000, + .modalias = "mmc_spi", + .platform_data = &mpc832x_mmc_pdata, +}; + +static int __init mpc832x_spi_init(void) +{ + par_io_config_pin(3, 0, 3, 0, 1, 0); /* SPI1 MOSI, I/O */ + par_io_config_pin(3, 1, 3, 0, 1, 0); /* SPI1 MISO, I/O */ + par_io_config_pin(3, 2, 3, 0, 1, 0); /* SPI1 CLK, I/O */ + par_io_config_pin(3, 3, 2, 0, 1, 0); /* SPI1 SEL, I */ + + par_io_config_pin(3, 13, 1, 0, 0, 0); /* !SD_CS, O */ + par_io_config_pin(3, 14, 2, 0, 0, 0); /* SD_INSERT, I */ + par_io_config_pin(3, 15, 2, 0, 0, 0); /* SD_PROTECT,I */ + + /* + * Don't bother with legacy stuff when device tree contains + * mmc-spi-slot node. + */ + if (of_find_compatible_node(NULL, NULL, "mmc-spi-slot")) + return 0; + return fsl_spi_init(&mpc832x_spi_boardinfo, 1, mpc83xx_spi_cs_control); +} +machine_device_initcall(mpc832x_rdb, mpc832x_spi_init); +#endif /* CONFIG_QUICC_ENGINE */ + +/* ************************************************************************ + * + * Setup the architecture + * + */ +static void __init mpc832x_rdb_setup_arch(void) +{ +#if defined(CONFIG_QUICC_ENGINE) + struct device_node *np; +#endif + + mpc83xx_setup_arch(); + +#ifdef CONFIG_QUICC_ENGINE + if ((np = of_find_node_by_name(NULL, "par_io")) != NULL) { + par_io_init(np); + of_node_put(np); + + for_each_node_by_name(np, "ucc") + par_io_of_config(np); + } +#endif /* CONFIG_QUICC_ENGINE */ +} + +machine_device_initcall(mpc832x_rdb, mpc83xx_declare_of_platform_devices); + +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init mpc832x_rdb_probe(void) +{ + return of_machine_is_compatible("MPC832xRDB"); +} + +define_machine(mpc832x_rdb) { + .name = "MPC832x RDB", + .probe = mpc832x_rdb_probe, + .setup_arch = mpc832x_rdb_setup_arch, + .init_IRQ = mpc83xx_ipic_and_qe_init_IRQ, + .get_irq = ipic_get_irq, + .restart = mpc83xx_restart, + .time_init = mpc83xx_time_init, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c new file mode 100644 index 000000000..73a5267df --- /dev/null +++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c @@ -0,0 +1,83 @@ +/* + * arch/powerpc/platforms/83xx/mpc834x_itx.c + * + * MPC834x ITX board specific routines + * + * Maintainer: Kumar Gala <galak@kernel.crashing.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/reboot.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/major.h> +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/seq_file.h> +#include <linux/root_dev.h> +#include <linux/of_platform.h> + +#include <linux/atomic.h> +#include <asm/time.h> +#include <asm/io.h> +#include <asm/machdep.h> +#include <asm/ipic.h> +#include <asm/irq.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> + +#include "mpc83xx.h" + +static const struct of_device_id mpc834x_itx_ids[] __initconst = { + { .compatible = "fsl,pq2pro-localbus", }, + {}, +}; + +static int __init mpc834x_itx_declare_of_platform_devices(void) +{ + mpc83xx_declare_of_platform_devices(); + return of_platform_bus_probe(NULL, mpc834x_itx_ids, NULL); +} +machine_device_initcall(mpc834x_itx, mpc834x_itx_declare_of_platform_devices); + +/* ************************************************************************ + * + * Setup the architecture + * + */ +static void __init mpc834x_itx_setup_arch(void) +{ + mpc83xx_setup_arch(); + + mpc834x_usb_cfg(); +} + +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init mpc834x_itx_probe(void) +{ + return of_machine_is_compatible("MPC834xMITX"); +} + +define_machine(mpc834x_itx) { + .name = "MPC834x ITX", + .probe = mpc834x_itx_probe, + .setup_arch = mpc834x_itx_setup_arch, + .init_IRQ = mpc83xx_ipic_init_IRQ, + .get_irq = ipic_get_irq, + .restart = mpc83xx_restart, + .time_init = mpc83xx_time_init, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/83xx/mpc834x_mds.c b/arch/powerpc/platforms/83xx/mpc834x_mds.c new file mode 100644 index 000000000..009cfc18a --- /dev/null +++ b/arch/powerpc/platforms/83xx/mpc834x_mds.c @@ -0,0 +1,104 @@ +/* + * arch/powerpc/platforms/83xx/mpc834x_mds.c + * + * MPC834x MDS board specific routines + * + * Maintainer: Kumar Gala <galak@kernel.crashing.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/reboot.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/major.h> +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/seq_file.h> +#include <linux/root_dev.h> +#include <linux/of_platform.h> + +#include <linux/atomic.h> +#include <asm/time.h> +#include <asm/io.h> +#include <asm/machdep.h> +#include <asm/ipic.h> +#include <asm/irq.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> + +#include "mpc83xx.h" + +#define BCSR5_INT_USB 0x02 +static int mpc834xemds_usb_cfg(void) +{ + struct device_node *np; + void __iomem *bcsr_regs = NULL; + u8 bcsr5; + + mpc834x_usb_cfg(); + /* Map BCSR area */ + np = of_find_node_by_name(NULL, "bcsr"); + if (np) { + struct resource res; + + of_address_to_resource(np, 0, &res); + bcsr_regs = ioremap(res.start, resource_size(&res)); + of_node_put(np); + } + if (!bcsr_regs) + return -1; + + /* + * if Processor Board is plugged into PIB board, + * force to use the PHY on Processor Board + */ + bcsr5 = in_8(bcsr_regs + 5); + if (!(bcsr5 & BCSR5_INT_USB)) + out_8(bcsr_regs + 5, (bcsr5 | BCSR5_INT_USB)); + iounmap(bcsr_regs); + return 0; +} + +/* ************************************************************************ + * + * Setup the architecture + * + */ +static void __init mpc834x_mds_setup_arch(void) +{ + mpc83xx_setup_arch(); + + mpc834xemds_usb_cfg(); +} + +machine_device_initcall(mpc834x_mds, mpc83xx_declare_of_platform_devices); + +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init mpc834x_mds_probe(void) +{ + return of_machine_is_compatible("MPC834xMDS"); +} + +define_machine(mpc834x_mds) { + .name = "MPC834x MDS", + .probe = mpc834x_mds_probe, + .setup_arch = mpc834x_mds_setup_arch, + .init_IRQ = mpc83xx_ipic_init_IRQ, + .get_irq = ipic_get_irq, + .restart = mpc83xx_restart, + .time_init = mpc83xx_time_init, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/83xx/mpc836x_mds.c b/arch/powerpc/platforms/83xx/mpc836x_mds.c new file mode 100644 index 000000000..fd44dd03e --- /dev/null +++ b/arch/powerpc/platforms/83xx/mpc836x_mds.c @@ -0,0 +1,222 @@ +/* + * Copyright 2006 Freescale Semiconductor, Inc. All rights reserved. + * + * Author: Li Yang <LeoLi@freescale.com> + * Yin Olivia <Hong-hua.Yin@freescale.com> + * + * Description: + * MPC8360E MDS board specific routines. + * + * Changelog: + * Jun 21, 2006 Initial version + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/compiler.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/reboot.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/major.h> +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/seq_file.h> +#include <linux/root_dev.h> +#include <linux/initrd.h> +#include <linux/of_platform.h> +#include <linux/of_device.h> + +#include <linux/atomic.h> +#include <asm/time.h> +#include <asm/io.h> +#include <asm/machdep.h> +#include <asm/ipic.h> +#include <asm/irq.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> +#include <sysdev/simple_gpio.h> +#include <soc/fsl/qe/qe.h> +#include <soc/fsl/qe/qe_ic.h> + +#include "mpc83xx.h" + +#undef DEBUG +#ifdef DEBUG +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif + +/* ************************************************************************ + * + * Setup the architecture + * + */ +static void __init mpc836x_mds_setup_arch(void) +{ + struct device_node *np; + u8 __iomem *bcsr_regs = NULL; + + mpc83xx_setup_arch(); + + /* Map BCSR area */ + np = of_find_node_by_name(NULL, "bcsr"); + if (np) { + struct resource res; + + of_address_to_resource(np, 0, &res); + bcsr_regs = ioremap(res.start, resource_size(&res)); + of_node_put(np); + } + +#ifdef CONFIG_QUICC_ENGINE + if ((np = of_find_node_by_name(NULL, "par_io")) != NULL) { + par_io_init(np); + of_node_put(np); + + for_each_node_by_name(np, "ucc") + par_io_of_config(np); +#ifdef CONFIG_QE_USB + /* Must fixup Par IO before QE GPIO chips are registered. */ + par_io_config_pin(1, 2, 1, 0, 3, 0); /* USBOE */ + par_io_config_pin(1, 3, 1, 0, 3, 0); /* USBTP */ + par_io_config_pin(1, 8, 1, 0, 1, 0); /* USBTN */ + par_io_config_pin(1, 10, 2, 0, 3, 0); /* USBRXD */ + par_io_config_pin(1, 9, 2, 1, 3, 0); /* USBRP */ + par_io_config_pin(1, 11, 2, 1, 3, 0); /* USBRN */ + par_io_config_pin(2, 20, 2, 0, 1, 0); /* CLK21 */ +#endif /* CONFIG_QE_USB */ + } + + if ((np = of_find_compatible_node(NULL, "network", "ucc_geth")) + != NULL){ + uint svid; + + /* Reset the Ethernet PHY */ +#define BCSR9_GETHRST 0x20 + clrbits8(&bcsr_regs[9], BCSR9_GETHRST); + udelay(1000); + setbits8(&bcsr_regs[9], BCSR9_GETHRST); + + /* handle mpc8360ea rev.2.1 erratum 2: RGMII Timing */ + svid = mfspr(SPRN_SVR); + if (svid == 0x80480021) { + void __iomem *immap; + + immap = ioremap(get_immrbase() + 0x14a8, 8); + + /* + * IMMR + 0x14A8[4:5] = 11 (clk delay for UCC 2) + * IMMR + 0x14A8[18:19] = 11 (clk delay for UCC 1) + */ + setbits32(immap, 0x0c003000); + + /* + * IMMR + 0x14AC[20:27] = 10101010 + * (data delay for both UCC's) + */ + clrsetbits_be32(immap + 4, 0xff0, 0xaa0); + + iounmap(immap); + } + + iounmap(bcsr_regs); + of_node_put(np); + } +#endif /* CONFIG_QUICC_ENGINE */ +} + +machine_device_initcall(mpc836x_mds, mpc83xx_declare_of_platform_devices); + +#ifdef CONFIG_QE_USB +static int __init mpc836x_usb_cfg(void) +{ + u8 __iomem *bcsr; + struct device_node *np; + const char *mode; + int ret = 0; + + np = of_find_compatible_node(NULL, NULL, "fsl,mpc8360mds-bcsr"); + if (!np) + return -ENODEV; + + bcsr = of_iomap(np, 0); + of_node_put(np); + if (!bcsr) + return -ENOMEM; + + np = of_find_compatible_node(NULL, NULL, "fsl,mpc8323-qe-usb"); + if (!np) { + ret = -ENODEV; + goto err; + } + +#define BCSR8_TSEC1M_MASK (0x3 << 6) +#define BCSR8_TSEC1M_RGMII (0x0 << 6) +#define BCSR8_TSEC2M_MASK (0x3 << 4) +#define BCSR8_TSEC2M_RGMII (0x0 << 4) + /* + * Default is GMII (2), but we should set it to RGMII (0) if we use + * USB (Eth PHY is in RGMII mode anyway). + */ + clrsetbits_8(&bcsr[8], BCSR8_TSEC1M_MASK | BCSR8_TSEC2M_MASK, + BCSR8_TSEC1M_RGMII | BCSR8_TSEC2M_RGMII); + +#define BCSR13_USBMASK 0x0f +#define BCSR13_nUSBEN 0x08 /* 1 - Disable, 0 - Enable */ +#define BCSR13_USBSPEED 0x04 /* 1 - Full, 0 - Low */ +#define BCSR13_USBMODE 0x02 /* 1 - Host, 0 - Function */ +#define BCSR13_nUSBVCC 0x01 /* 1 - gets VBUS, 0 - supplies VBUS */ + + clrsetbits_8(&bcsr[13], BCSR13_USBMASK, BCSR13_USBSPEED); + + mode = of_get_property(np, "mode", NULL); + if (mode && !strcmp(mode, "peripheral")) { + setbits8(&bcsr[13], BCSR13_nUSBVCC); + qe_usb_clock_set(QE_CLK21, 48000000); + } else { + setbits8(&bcsr[13], BCSR13_USBMODE); + /* + * The BCSR GPIOs are used to control power and + * speed of the USB transceiver. This is needed for + * the USB Host only. + */ + simple_gpiochip_init("fsl,mpc8360mds-bcsr-gpio"); + } + + of_node_put(np); +err: + iounmap(bcsr); + return ret; +} +machine_arch_initcall(mpc836x_mds, mpc836x_usb_cfg); +#endif /* CONFIG_QE_USB */ + +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init mpc836x_mds_probe(void) +{ + return of_machine_is_compatible("MPC836xMDS"); +} + +define_machine(mpc836x_mds) { + .name = "MPC836x MDS", + .probe = mpc836x_mds_probe, + .setup_arch = mpc836x_mds_setup_arch, + .init_IRQ = mpc83xx_ipic_and_qe_init_IRQ, + .get_irq = ipic_get_irq, + .restart = mpc83xx_restart, + .time_init = mpc83xx_time_init, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/83xx/mpc836x_rdk.c b/arch/powerpc/platforms/83xx/mpc836x_rdk.c new file mode 100644 index 000000000..93f024fd9 --- /dev/null +++ b/arch/powerpc/platforms/83xx/mpc836x_rdk.c @@ -0,0 +1,55 @@ +/* + * MPC8360E-RDK board file. + * + * Copyright (c) 2006 Freescale Semiconductor, Inc. + * Copyright (c) 2007-2008 MontaVista Software, Inc. + * + * Author: Anton Vorontsov <avorontsov@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/of_platform.h> +#include <linux/io.h> +#include <asm/prom.h> +#include <asm/time.h> +#include <asm/ipic.h> +#include <asm/udbg.h> +#include <soc/fsl/qe/qe.h> +#include <soc/fsl/qe/qe_ic.h> +#include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> + +#include "mpc83xx.h" + +machine_device_initcall(mpc836x_rdk, mpc83xx_declare_of_platform_devices); + +static void __init mpc836x_rdk_setup_arch(void) +{ + mpc83xx_setup_arch(); +} + +/* + * Called very early, MMU is off, device-tree isn't unflattened. + */ +static int __init mpc836x_rdk_probe(void) +{ + return of_machine_is_compatible("fsl,mpc8360rdk"); +} + +define_machine(mpc836x_rdk) { + .name = "MPC836x RDK", + .probe = mpc836x_rdk_probe, + .setup_arch = mpc836x_rdk_setup_arch, + .init_IRQ = mpc83xx_ipic_and_qe_init_IRQ, + .get_irq = ipic_get_irq, + .restart = mpc83xx_restart, + .time_init = mpc83xx_time_init, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/83xx/mpc837x_mds.c b/arch/powerpc/platforms/83xx/mpc837x_mds.c new file mode 100644 index 000000000..3b34cc1f6 --- /dev/null +++ b/arch/powerpc/platforms/83xx/mpc837x_mds.c @@ -0,0 +1,106 @@ +/* + * arch/powerpc/platforms/83xx/mpc837x_mds.c + * + * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved. + * + * MPC837x MDS board specific routines + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/pci.h> +#include <linux/of.h> +#include <linux/of_platform.h> + +#include <asm/time.h> +#include <asm/ipic.h> +#include <asm/udbg.h> +#include <asm/prom.h> +#include <sysdev/fsl_pci.h> + +#include "mpc83xx.h" + +#define BCSR12_USB_SER_MASK 0x8a +#define BCSR12_USB_SER_PIN 0x80 +#define BCSR12_USB_SER_DEVICE 0x02 + +static int mpc837xmds_usb_cfg(void) +{ + struct device_node *np; + const void *phy_type, *mode; + void __iomem *bcsr_regs = NULL; + u8 bcsr12; + int ret; + + ret = mpc837x_usb_cfg(); + if (ret) + return ret; + /* Map BCSR area */ + np = of_find_compatible_node(NULL, NULL, "fsl,mpc837xmds-bcsr"); + if (np) { + bcsr_regs = of_iomap(np, 0); + of_node_put(np); + } + if (!bcsr_regs) + return -1; + + np = of_find_node_by_name(NULL, "usb"); + if (!np) { + ret = -ENODEV; + goto out; + } + phy_type = of_get_property(np, "phy_type", NULL); + if (phy_type && !strcmp(phy_type, "ulpi")) { + clrbits8(bcsr_regs + 12, BCSR12_USB_SER_PIN); + } else if (phy_type && !strcmp(phy_type, "serial")) { + mode = of_get_property(np, "dr_mode", NULL); + bcsr12 = in_8(bcsr_regs + 12) & ~BCSR12_USB_SER_MASK; + bcsr12 |= BCSR12_USB_SER_PIN; + if (mode && !strcmp(mode, "peripheral")) + bcsr12 |= BCSR12_USB_SER_DEVICE; + out_8(bcsr_regs + 12, bcsr12); + } else { + printk(KERN_ERR "USB DR: unsupported PHY\n"); + } + + of_node_put(np); +out: + iounmap(bcsr_regs); + return ret; +} + +/* ************************************************************************ + * + * Setup the architecture + * + */ +static void __init mpc837x_mds_setup_arch(void) +{ + mpc83xx_setup_arch(); + mpc837xmds_usb_cfg(); +} + +machine_device_initcall(mpc837x_mds, mpc83xx_declare_of_platform_devices); + +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init mpc837x_mds_probe(void) +{ + return of_machine_is_compatible("fsl,mpc837xmds"); +} + +define_machine(mpc837x_mds) { + .name = "MPC837x MDS", + .probe = mpc837x_mds_probe, + .setup_arch = mpc837x_mds_setup_arch, + .init_IRQ = mpc83xx_ipic_init_IRQ, + .get_irq = ipic_get_irq, + .restart = mpc83xx_restart, + .time_init = mpc83xx_time_init, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/83xx/mpc837x_rdb.c b/arch/powerpc/platforms/83xx/mpc837x_rdb.c new file mode 100644 index 000000000..0c55fa6af --- /dev/null +++ b/arch/powerpc/platforms/83xx/mpc837x_rdb.c @@ -0,0 +1,86 @@ +/* + * arch/powerpc/platforms/83xx/mpc837x_rdb.c + * + * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved. + * + * MPC837x RDB board specific routines + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/pci.h> +#include <linux/of_platform.h> + +#include <asm/time.h> +#include <asm/ipic.h> +#include <asm/udbg.h> +#include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> + +#include "mpc83xx.h" + +static void mpc837x_rdb_sd_cfg(void) +{ + void __iomem *im; + + im = ioremap(get_immrbase(), 0x1000); + if (!im) { + WARN_ON(1); + return; + } + + /* + * On RDB boards (in contrast to MDS) USBB pins are used for SD only, + * so we can safely mux them away from the USB block. + */ + clrsetbits_be32(im + MPC83XX_SICRL_OFFS, MPC837X_SICRL_USBB_MASK, + MPC837X_SICRL_SD); + clrsetbits_be32(im + MPC83XX_SICRH_OFFS, MPC837X_SICRH_SPI_MASK, + MPC837X_SICRH_SD); + iounmap(im); +} + +/* ************************************************************************ + * + * Setup the architecture + * + */ +static void __init mpc837x_rdb_setup_arch(void) +{ + mpc83xx_setup_arch(); + mpc837x_usb_cfg(); + mpc837x_rdb_sd_cfg(); +} + +machine_device_initcall(mpc837x_rdb, mpc83xx_declare_of_platform_devices); + +static const char * const board[] __initconst = { + "fsl,mpc8377rdb", + "fsl,mpc8378rdb", + "fsl,mpc8379rdb", + "fsl,mpc8377wlan", + NULL +}; + +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init mpc837x_rdb_probe(void) +{ + return of_device_compatible_match(of_root, board); +} + +define_machine(mpc837x_rdb) { + .name = "MPC837x RDB/WLAN", + .probe = mpc837x_rdb_probe, + .setup_arch = mpc837x_rdb_setup_arch, + .init_IRQ = mpc83xx_ipic_init_IRQ, + .get_irq = ipic_get_irq, + .restart = mpc83xx_restart, + .time_init = mpc83xx_time_init, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h new file mode 100644 index 000000000..459145623 --- /dev/null +++ b/arch/powerpc/platforms/83xx/mpc83xx.h @@ -0,0 +1,92 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __MPC83XX_H__ +#define __MPC83XX_H__ + +#include <linux/init.h> +#include <linux/device.h> +#include <asm/pci-bridge.h> + +/* System Clock Control Register */ +#define MPC83XX_SCCR_OFFS 0xA08 +#define MPC83XX_SCCR_USB_MASK 0x00f00000 +#define MPC83XX_SCCR_USB_MPHCM_11 0x00c00000 +#define MPC83XX_SCCR_USB_MPHCM_01 0x00400000 +#define MPC83XX_SCCR_USB_MPHCM_10 0x00800000 +#define MPC83XX_SCCR_USB_DRCM_11 0x00300000 +#define MPC83XX_SCCR_USB_DRCM_01 0x00100000 +#define MPC83XX_SCCR_USB_DRCM_10 0x00200000 +#define MPC8315_SCCR_USB_MASK 0x00c00000 +#define MPC8315_SCCR_USB_DRCM_11 0x00c00000 +#define MPC8315_SCCR_USB_DRCM_01 0x00400000 +#define MPC837X_SCCR_USB_DRCM_11 0x00c00000 + +/* system i/o configuration register low */ +#define MPC83XX_SICRL_OFFS 0x114 +#define MPC834X_SICRL_USB_MASK 0x60000000 +#define MPC834X_SICRL_USB0 0x20000000 +#define MPC834X_SICRL_USB1 0x40000000 +#define MPC831X_SICRL_USB_MASK 0x00000c00 +#define MPC831X_SICRL_USB_ULPI 0x00000800 +#define MPC8315_SICRL_USB_MASK 0x000000fc +#define MPC8315_SICRL_USB_ULPI 0x00000054 +#define MPC837X_SICRL_USB_MASK 0xf0000000 +#define MPC837X_SICRL_USB_ULPI 0x50000000 +#define MPC837X_SICRL_USBB_MASK 0x30000000 +#define MPC837X_SICRL_SD 0x20000000 + +/* system i/o configuration register high */ +#define MPC83XX_SICRH_OFFS 0x118 +#define MPC8308_SICRH_USB_MASK 0x000c0000 +#define MPC8308_SICRH_USB_ULPI 0x00040000 +#define MPC834X_SICRH_USB_UTMI 0x00020000 +#define MPC831X_SICRH_USB_MASK 0x000000e0 +#define MPC831X_SICRH_USB_ULPI 0x000000a0 +#define MPC8315_SICRH_USB_MASK 0x0000ff00 +#define MPC8315_SICRH_USB_ULPI 0x00000000 +#define MPC837X_SICRH_SPI_MASK 0x00000003 +#define MPC837X_SICRH_SD 0x00000001 + +/* USB Control Register */ +#define FSL_USB2_CONTROL_OFFS 0x500 +#define CONTROL_UTMI_PHY_EN 0x00000200 +#define CONTROL_REFSEL_24MHZ 0x00000040 +#define CONTROL_REFSEL_48MHZ 0x00000080 +#define CONTROL_PHY_CLK_SEL_ULPI 0x00000400 +#define CONTROL_OTG_PORT 0x00000020 + +/* USB PORTSC Registers */ +#define FSL_USB2_PORTSC1_OFFS 0x184 +#define FSL_USB2_PORTSC2_OFFS 0x188 +#define PORTSCX_PTW_16BIT 0x10000000 +#define PORTSCX_PTS_UTMI 0x00000000 +#define PORTSCX_PTS_ULPI 0x80000000 + +/* + * Declaration for the various functions exported by the + * mpc83xx_* files. Mostly for use by mpc83xx_setup + */ + +extern void __noreturn mpc83xx_restart(char *cmd); +extern long mpc83xx_time_init(void); +extern int mpc837x_usb_cfg(void); +extern int mpc834x_usb_cfg(void); +extern int mpc831x_usb_cfg(void); +extern void mpc83xx_ipic_init_IRQ(void); +#ifdef CONFIG_QUICC_ENGINE +extern void mpc83xx_qe_init_IRQ(void); +extern void mpc83xx_ipic_and_qe_init_IRQ(void); +#else +static inline void __init mpc83xx_qe_init_IRQ(void) {} +#define mpc83xx_ipic_and_qe_init_IRQ mpc83xx_ipic_init_IRQ +#endif /* CONFIG_QUICC_ENGINE */ + +#ifdef CONFIG_PCI +extern void mpc83xx_setup_pci(void); +#else +#define mpc83xx_setup_pci() do {} while (0) +#endif + +extern int mpc83xx_declare_of_platform_devices(void); +extern void mpc83xx_setup_arch(void); + +#endif /* __MPC83XX_H__ */ diff --git a/arch/powerpc/platforms/83xx/suspend-asm.S b/arch/powerpc/platforms/83xx/suspend-asm.S new file mode 100644 index 000000000..8137f77ab --- /dev/null +++ b/arch/powerpc/platforms/83xx/suspend-asm.S @@ -0,0 +1,553 @@ +/* + * Enter and leave deep sleep state on MPC83xx + * + * Copyright (c) 2006-2008 Freescale Semiconductor, Inc. + * Author: Scott Wood <scottwood@freescale.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <asm/page.h> +#include <asm/ppc_asm.h> +#include <asm/reg.h> +#include <asm/asm-offsets.h> + +#define SS_MEMSAVE 0x00 /* First 8 bytes of RAM */ +#define SS_HID 0x08 /* 3 HIDs */ +#define SS_IABR 0x14 /* 2 IABRs */ +#define SS_IBCR 0x1c +#define SS_DABR 0x20 /* 2 DABRs */ +#define SS_DBCR 0x28 +#define SS_SP 0x2c +#define SS_SR 0x30 /* 16 segment registers */ +#define SS_R2 0x70 +#define SS_MSR 0x74 +#define SS_SDR1 0x78 +#define SS_LR 0x7c +#define SS_SPRG 0x80 /* 8 SPRGs */ +#define SS_DBAT 0xa0 /* 8 DBATs */ +#define SS_IBAT 0xe0 /* 8 IBATs */ +#define SS_TB 0x120 +#define SS_CR 0x128 +#define SS_GPREG 0x12c /* r12-r31 */ +#define STATE_SAVE_SIZE 0x17c + + .section .data + .align 5 + +mpc83xx_sleep_save_area: + .space STATE_SAVE_SIZE +immrbase: + .long 0 + + .section .text + .align 5 + + /* r3 = physical address of IMMR */ +_GLOBAL(mpc83xx_enter_deep_sleep) + lis r4, immrbase@ha + stw r3, immrbase@l(r4) + + /* The first 2 words of memory are used to communicate with the + * bootloader, to tell it how to resume. + * + * The first word is the magic number 0xf5153ae5, and the second + * is the pointer to mpc83xx_deep_resume. + * + * The original content of these two words is saved in SS_MEMSAVE. + */ + + lis r3, mpc83xx_sleep_save_area@h + ori r3, r3, mpc83xx_sleep_save_area@l + + lis r4, KERNELBASE@h + lwz r5, 0(r4) + lwz r6, 4(r4) + + stw r5, SS_MEMSAVE+0(r3) + stw r6, SS_MEMSAVE+4(r3) + + mfspr r5, SPRN_HID0 + mfspr r6, SPRN_HID1 + mfspr r7, SPRN_HID2 + + stw r5, SS_HID+0(r3) + stw r6, SS_HID+4(r3) + stw r7, SS_HID+8(r3) + + mfspr r4, SPRN_IABR + mfspr r5, SPRN_IABR2 + mfspr r6, SPRN_IBCR + mfspr r7, SPRN_DABR + mfspr r8, SPRN_DABR2 + mfspr r9, SPRN_DBCR + + stw r4, SS_IABR+0(r3) + stw r5, SS_IABR+4(r3) + stw r6, SS_IBCR(r3) + stw r7, SS_DABR+0(r3) + stw r8, SS_DABR+4(r3) + stw r9, SS_DBCR(r3) + + mfspr r4, SPRN_SPRG0 + mfspr r5, SPRN_SPRG1 + mfspr r6, SPRN_SPRG2 + mfspr r7, SPRN_SPRG3 + mfsdr1 r8 + + stw r4, SS_SPRG+0(r3) + stw r5, SS_SPRG+4(r3) + stw r6, SS_SPRG+8(r3) + stw r7, SS_SPRG+12(r3) + stw r8, SS_SDR1(r3) + + mfspr r4, SPRN_SPRG4 + mfspr r5, SPRN_SPRG5 + mfspr r6, SPRN_SPRG6 + mfspr r7, SPRN_SPRG7 + + stw r4, SS_SPRG+16(r3) + stw r5, SS_SPRG+20(r3) + stw r6, SS_SPRG+24(r3) + stw r7, SS_SPRG+28(r3) + + mfspr r4, SPRN_DBAT0U + mfspr r5, SPRN_DBAT0L + mfspr r6, SPRN_DBAT1U + mfspr r7, SPRN_DBAT1L + + stw r4, SS_DBAT+0x00(r3) + stw r5, SS_DBAT+0x04(r3) + stw r6, SS_DBAT+0x08(r3) + stw r7, SS_DBAT+0x0c(r3) + + mfspr r4, SPRN_DBAT2U + mfspr r5, SPRN_DBAT2L + mfspr r6, SPRN_DBAT3U + mfspr r7, SPRN_DBAT3L + + stw r4, SS_DBAT+0x10(r3) + stw r5, SS_DBAT+0x14(r3) + stw r6, SS_DBAT+0x18(r3) + stw r7, SS_DBAT+0x1c(r3) + + mfspr r4, SPRN_DBAT4U + mfspr r5, SPRN_DBAT4L + mfspr r6, SPRN_DBAT5U + mfspr r7, SPRN_DBAT5L + + stw r4, SS_DBAT+0x20(r3) + stw r5, SS_DBAT+0x24(r3) + stw r6, SS_DBAT+0x28(r3) + stw r7, SS_DBAT+0x2c(r3) + + mfspr r4, SPRN_DBAT6U + mfspr r5, SPRN_DBAT6L + mfspr r6, SPRN_DBAT7U + mfspr r7, SPRN_DBAT7L + + stw r4, SS_DBAT+0x30(r3) + stw r5, SS_DBAT+0x34(r3) + stw r6, SS_DBAT+0x38(r3) + stw r7, SS_DBAT+0x3c(r3) + + mfspr r4, SPRN_IBAT0U + mfspr r5, SPRN_IBAT0L + mfspr r6, SPRN_IBAT1U + mfspr r7, SPRN_IBAT1L + + stw r4, SS_IBAT+0x00(r3) + stw r5, SS_IBAT+0x04(r3) + stw r6, SS_IBAT+0x08(r3) + stw r7, SS_IBAT+0x0c(r3) + + mfspr r4, SPRN_IBAT2U + mfspr r5, SPRN_IBAT2L + mfspr r6, SPRN_IBAT3U + mfspr r7, SPRN_IBAT3L + + stw r4, SS_IBAT+0x10(r3) + stw r5, SS_IBAT+0x14(r3) + stw r6, SS_IBAT+0x18(r3) + stw r7, SS_IBAT+0x1c(r3) + + mfspr r4, SPRN_IBAT4U + mfspr r5, SPRN_IBAT4L + mfspr r6, SPRN_IBAT5U + mfspr r7, SPRN_IBAT5L + + stw r4, SS_IBAT+0x20(r3) + stw r5, SS_IBAT+0x24(r3) + stw r6, SS_IBAT+0x28(r3) + stw r7, SS_IBAT+0x2c(r3) + + mfspr r4, SPRN_IBAT6U + mfspr r5, SPRN_IBAT6L + mfspr r6, SPRN_IBAT7U + mfspr r7, SPRN_IBAT7L + + stw r4, SS_IBAT+0x30(r3) + stw r5, SS_IBAT+0x34(r3) + stw r6, SS_IBAT+0x38(r3) + stw r7, SS_IBAT+0x3c(r3) + + mfmsr r4 + mflr r5 + mfcr r6 + + stw r4, SS_MSR(r3) + stw r5, SS_LR(r3) + stw r6, SS_CR(r3) + stw r1, SS_SP(r3) + stw r2, SS_R2(r3) + +1: mftbu r4 + mftb r5 + mftbu r6 + cmpw r4, r6 + bne 1b + + stw r4, SS_TB+0(r3) + stw r5, SS_TB+4(r3) + + stmw r12, SS_GPREG(r3) + + li r4, 0 + addi r6, r3, SS_SR-4 +1: mfsrin r5, r4 + stwu r5, 4(r6) + addis r4, r4, 0x1000 + cmpwi r4, 0 + bne 1b + + /* Disable machine checks and critical exceptions */ + mfmsr r4 + rlwinm r4, r4, 0, ~MSR_CE + rlwinm r4, r4, 0, ~MSR_ME + mtmsr r4 + isync + +#define TMP_VIRT_IMMR 0xf0000000 +#define DEFAULT_IMMR_VALUE 0xff400000 +#define IMMRBAR_BASE 0x0000 + + lis r4, immrbase@ha + lwz r4, immrbase@l(r4) + + /* Use DBAT0 to address the current IMMR space */ + + ori r4, r4, 0x002a + mtspr SPRN_DBAT0L, r4 + lis r8, TMP_VIRT_IMMR@h + ori r4, r8, 0x001e /* 1 MByte accessible from Kernel Space only */ + mtspr SPRN_DBAT0U, r4 + isync + + /* Use DBAT1 to address the original IMMR space */ + + lis r4, DEFAULT_IMMR_VALUE@h + ori r4, r4, 0x002a + mtspr SPRN_DBAT1L, r4 + lis r9, (TMP_VIRT_IMMR + 0x01000000)@h + ori r4, r9, 0x001e /* 1 MByte accessible from Kernel Space only */ + mtspr SPRN_DBAT1U, r4 + isync + + /* Use DBAT2 to address the beginning of RAM. This isn't done + * using the normal virtual mapping, because with page debugging + * enabled it will be read-only. + */ + + li r4, 0x0002 + mtspr SPRN_DBAT2L, r4 + lis r4, KERNELBASE@h + ori r4, r4, 0x001e /* 1 MByte accessible from Kernel Space only */ + mtspr SPRN_DBAT2U, r4 + isync + + /* Flush the cache with our BAT, as there will be TLB misses + * otherwise if page debugging is enabled, and these misses + * will disturb the PLRU algorithm. + */ + + bl __flush_disable_L1 + + /* Keep the i-cache enabled, so the hack below for low-boot + * flash will work. + */ + mfspr r3, SPRN_HID0 + ori r3, r3, HID0_ICE + mtspr SPRN_HID0, r3 + isync + + lis r6, 0xf515 + ori r6, r6, 0x3ae5 + + lis r7, mpc83xx_deep_resume@h + ori r7, r7, mpc83xx_deep_resume@l + tophys(r7, r7) + + lis r5, KERNELBASE@h + stw r6, 0(r5) + stw r7, 4(r5) + + /* Reset BARs */ + + li r4, 0 + stw r4, 0x0024(r8) + stw r4, 0x002c(r8) + stw r4, 0x0034(r8) + stw r4, 0x003c(r8) + stw r4, 0x0064(r8) + stw r4, 0x006c(r8) + + /* Rev 1 of the 8313 has problems with wakeup events that are + * pending during the transition to deep sleep state (such as if + * the PCI host sets the state to D3 and then D0 in rapid + * succession). This check shrinks the race window somewhat. + * + * See erratum PCI23, though the problem is not limited + * to PCI. + */ + + lwz r3, 0x0b04(r8) + andi. r3, r3, 1 + bne- mpc83xx_deep_resume + + /* Move IMMR back to the default location, following the + * procedure specified in the MPC8313 manual. + */ + lwz r4, IMMRBAR_BASE(r8) + isync + lis r4, DEFAULT_IMMR_VALUE@h + stw r4, IMMRBAR_BASE(r8) + lis r4, KERNELBASE@h + lwz r4, 0(r4) + isync + lwz r4, IMMRBAR_BASE(r9) + mr r8, r9 + isync + + /* Check the Reset Configuration Word to see whether flash needs + * to be mapped at a low address or a high address. + */ + + lwz r4, 0x0904(r8) + andis. r4, r4, 0x0400 + li r4, 0 + beq boot_low + lis r4, 0xff80 +boot_low: + stw r4, 0x0020(r8) + lis r7, 0x8000 + ori r7, r7, 0x0016 + + mfspr r5, SPRN_HID0 + rlwinm r5, r5, 0, ~(HID0_DOZE | HID0_NAP) + oris r5, r5, HID0_SLEEP@h + mtspr SPRN_HID0, r5 + isync + + mfmsr r5 + oris r5, r5, MSR_POW@h + + /* Enable the flash mapping at the appropriate address. This + * mapping will override the RAM mapping if booting low, so there's + * no need to disable the latter. This must be done inside the same + * cache line as setting MSR_POW, so that no instruction fetches + * from RAM happen after the flash mapping is turned on. + */ + + .align 5 + stw r7, 0x0024(r8) + sync + isync + mtmsr r5 + isync +1: b 1b + +mpc83xx_deep_resume: + lis r4, 1f@h + ori r4, r4, 1f@l + tophys(r4, r4) + mtsrr0 r4 + + mfmsr r4 + rlwinm r4, r4, 0, ~(MSR_IR | MSR_DR) + mtsrr1 r4 + + rfi + +1: tlbia + bl __inval_enable_L1 + + lis r3, mpc83xx_sleep_save_area@h + ori r3, r3, mpc83xx_sleep_save_area@l + tophys(r3, r3) + + lwz r5, SS_MEMSAVE+0(r3) + lwz r6, SS_MEMSAVE+4(r3) + + stw r5, 0(0) + stw r6, 4(0) + + lwz r5, SS_HID+0(r3) + lwz r6, SS_HID+4(r3) + lwz r7, SS_HID+8(r3) + + mtspr SPRN_HID0, r5 + mtspr SPRN_HID1, r6 + mtspr SPRN_HID2, r7 + + lwz r4, SS_IABR+0(r3) + lwz r5, SS_IABR+4(r3) + lwz r6, SS_IBCR(r3) + lwz r7, SS_DABR+0(r3) + lwz r8, SS_DABR+4(r3) + lwz r9, SS_DBCR(r3) + + mtspr SPRN_IABR, r4 + mtspr SPRN_IABR2, r5 + mtspr SPRN_IBCR, r6 + mtspr SPRN_DABR, r7 + mtspr SPRN_DABR2, r8 + mtspr SPRN_DBCR, r9 + + li r4, 0 + addi r6, r3, SS_SR-4 +1: lwzu r5, 4(r6) + mtsrin r5, r4 + addis r4, r4, 0x1000 + cmpwi r4, 0 + bne 1b + + lwz r4, SS_DBAT+0x00(r3) + lwz r5, SS_DBAT+0x04(r3) + lwz r6, SS_DBAT+0x08(r3) + lwz r7, SS_DBAT+0x0c(r3) + + mtspr SPRN_DBAT0U, r4 + mtspr SPRN_DBAT0L, r5 + mtspr SPRN_DBAT1U, r6 + mtspr SPRN_DBAT1L, r7 + + lwz r4, SS_DBAT+0x10(r3) + lwz r5, SS_DBAT+0x14(r3) + lwz r6, SS_DBAT+0x18(r3) + lwz r7, SS_DBAT+0x1c(r3) + + mtspr SPRN_DBAT2U, r4 + mtspr SPRN_DBAT2L, r5 + mtspr SPRN_DBAT3U, r6 + mtspr SPRN_DBAT3L, r7 + + lwz r4, SS_DBAT+0x20(r3) + lwz r5, SS_DBAT+0x24(r3) + lwz r6, SS_DBAT+0x28(r3) + lwz r7, SS_DBAT+0x2c(r3) + + mtspr SPRN_DBAT4U, r4 + mtspr SPRN_DBAT4L, r5 + mtspr SPRN_DBAT5U, r6 + mtspr SPRN_DBAT5L, r7 + + lwz r4, SS_DBAT+0x30(r3) + lwz r5, SS_DBAT+0x34(r3) + lwz r6, SS_DBAT+0x38(r3) + lwz r7, SS_DBAT+0x3c(r3) + + mtspr SPRN_DBAT6U, r4 + mtspr SPRN_DBAT6L, r5 + mtspr SPRN_DBAT7U, r6 + mtspr SPRN_DBAT7L, r7 + + lwz r4, SS_IBAT+0x00(r3) + lwz r5, SS_IBAT+0x04(r3) + lwz r6, SS_IBAT+0x08(r3) + lwz r7, SS_IBAT+0x0c(r3) + + mtspr SPRN_IBAT0U, r4 + mtspr SPRN_IBAT0L, r5 + mtspr SPRN_IBAT1U, r6 + mtspr SPRN_IBAT1L, r7 + + lwz r4, SS_IBAT+0x10(r3) + lwz r5, SS_IBAT+0x14(r3) + lwz r6, SS_IBAT+0x18(r3) + lwz r7, SS_IBAT+0x1c(r3) + + mtspr SPRN_IBAT2U, r4 + mtspr SPRN_IBAT2L, r5 + mtspr SPRN_IBAT3U, r6 + mtspr SPRN_IBAT3L, r7 + + lwz r4, SS_IBAT+0x20(r3) + lwz r5, SS_IBAT+0x24(r3) + lwz r6, SS_IBAT+0x28(r3) + lwz r7, SS_IBAT+0x2c(r3) + + mtspr SPRN_IBAT4U, r4 + mtspr SPRN_IBAT4L, r5 + mtspr SPRN_IBAT5U, r6 + mtspr SPRN_IBAT5L, r7 + + lwz r4, SS_IBAT+0x30(r3) + lwz r5, SS_IBAT+0x34(r3) + lwz r6, SS_IBAT+0x38(r3) + lwz r7, SS_IBAT+0x3c(r3) + + mtspr SPRN_IBAT6U, r4 + mtspr SPRN_IBAT6L, r5 + mtspr SPRN_IBAT7U, r6 + mtspr SPRN_IBAT7L, r7 + + lwz r4, SS_SPRG+16(r3) + lwz r5, SS_SPRG+20(r3) + lwz r6, SS_SPRG+24(r3) + lwz r7, SS_SPRG+28(r3) + + mtspr SPRN_SPRG4, r4 + mtspr SPRN_SPRG5, r5 + mtspr SPRN_SPRG6, r6 + mtspr SPRN_SPRG7, r7 + + lwz r4, SS_SPRG+0(r3) + lwz r5, SS_SPRG+4(r3) + lwz r6, SS_SPRG+8(r3) + lwz r7, SS_SPRG+12(r3) + lwz r8, SS_SDR1(r3) + + mtspr SPRN_SPRG0, r4 + mtspr SPRN_SPRG1, r5 + mtspr SPRN_SPRG2, r6 + mtspr SPRN_SPRG3, r7 + mtsdr1 r8 + + lwz r4, SS_MSR(r3) + lwz r5, SS_LR(r3) + lwz r6, SS_CR(r3) + lwz r1, SS_SP(r3) + lwz r2, SS_R2(r3) + + mtsrr1 r4 + mtsrr0 r5 + mtcr r6 + + li r4, 0 + mtspr SPRN_TBWL, r4 + + lwz r4, SS_TB+0(r3) + lwz r5, SS_TB+4(r3) + + mtspr SPRN_TBWU, r4 + mtspr SPRN_TBWL, r5 + + lmw r12, SS_GPREG(r3) + + /* Kick decrementer */ + li r0, 1 + mtdec r0 + + rfi diff --git a/arch/powerpc/platforms/83xx/suspend.c b/arch/powerpc/platforms/83xx/suspend.c new file mode 100644 index 000000000..7fa3e1978 --- /dev/null +++ b/arch/powerpc/platforms/83xx/suspend.c @@ -0,0 +1,445 @@ +/* + * MPC83xx suspend support + * + * Author: Scott Wood <scottwood@freescale.com> + * + * Copyright (c) 2006-2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/pm.h> +#include <linux/types.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/wait.h> +#include <linux/sched/signal.h> +#include <linux/kthread.h> +#include <linux/freezer.h> +#include <linux/suspend.h> +#include <linux/fsl_devices.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/export.h> + +#include <asm/reg.h> +#include <asm/io.h> +#include <asm/time.h> +#include <asm/mpc6xx.h> +#include <asm/switch_to.h> + +#include <sysdev/fsl_soc.h> + +#define PMCCR1_NEXT_STATE 0x0C /* Next state for power management */ +#define PMCCR1_NEXT_STATE_SHIFT 2 +#define PMCCR1_CURR_STATE 0x03 /* Current state for power management*/ +#define IMMR_SYSCR_OFFSET 0x100 +#define IMMR_RCW_OFFSET 0x900 +#define RCW_PCI_HOST 0x80000000 + +void mpc83xx_enter_deep_sleep(phys_addr_t immrbase); + +struct mpc83xx_pmc { + u32 config; +#define PMCCR_DLPEN 2 /* DDR SDRAM low power enable */ +#define PMCCR_SLPEN 1 /* System low power enable */ + + u32 event; + u32 mask; +/* All but PMCI are deep-sleep only */ +#define PMCER_GPIO 0x100 +#define PMCER_PCI 0x080 +#define PMCER_USB 0x040 +#define PMCER_ETSEC1 0x020 +#define PMCER_ETSEC2 0x010 +#define PMCER_TIMER 0x008 +#define PMCER_INT1 0x004 +#define PMCER_INT2 0x002 +#define PMCER_PMCI 0x001 +#define PMCER_ALL 0x1FF + + /* deep-sleep only */ + u32 config1; +#define PMCCR1_USE_STATE 0x80000000 +#define PMCCR1_PME_EN 0x00000080 +#define PMCCR1_ASSERT_PME 0x00000040 +#define PMCCR1_POWER_OFF 0x00000020 + + /* deep-sleep only */ + u32 config2; +}; + +struct mpc83xx_rcw { + u32 rcwlr; + u32 rcwhr; +}; + +struct mpc83xx_clock { + u32 spmr; + u32 occr; + u32 sccr; +}; + +struct mpc83xx_syscr { + __be32 sgprl; + __be32 sgprh; + __be32 spridr; + __be32 :32; + __be32 spcr; + __be32 sicrl; + __be32 sicrh; +}; + +struct mpc83xx_saved { + u32 sicrl; + u32 sicrh; + u32 sccr; +}; + +struct pmc_type { + int has_deep_sleep; +}; + +static struct platform_device *pmc_dev; +static int has_deep_sleep, deep_sleeping; +static int pmc_irq; +static struct mpc83xx_pmc __iomem *pmc_regs; +static struct mpc83xx_clock __iomem *clock_regs; +static struct mpc83xx_syscr __iomem *syscr_regs; +static struct mpc83xx_saved saved_regs; +static int is_pci_agent, wake_from_pci; +static phys_addr_t immrbase; +static int pci_pm_state; +static DECLARE_WAIT_QUEUE_HEAD(agent_wq); + +int fsl_deep_sleep(void) +{ + return deep_sleeping; +} +EXPORT_SYMBOL(fsl_deep_sleep); + +static int mpc83xx_change_state(void) +{ + u32 curr_state; + u32 reg_cfg1 = in_be32(&pmc_regs->config1); + + if (is_pci_agent) { + pci_pm_state = (reg_cfg1 & PMCCR1_NEXT_STATE) >> + PMCCR1_NEXT_STATE_SHIFT; + curr_state = reg_cfg1 & PMCCR1_CURR_STATE; + + if (curr_state != pci_pm_state) { + reg_cfg1 &= ~PMCCR1_CURR_STATE; + reg_cfg1 |= pci_pm_state; + out_be32(&pmc_regs->config1, reg_cfg1); + + wake_up(&agent_wq); + return 1; + } + } + + return 0; +} + +static irqreturn_t pmc_irq_handler(int irq, void *dev_id) +{ + u32 event = in_be32(&pmc_regs->event); + int ret = IRQ_NONE; + + if (mpc83xx_change_state()) + ret = IRQ_HANDLED; + + if (event) { + out_be32(&pmc_regs->event, event); + ret = IRQ_HANDLED; + } + + return ret; +} + +static void mpc83xx_suspend_restore_regs(void) +{ + out_be32(&syscr_regs->sicrl, saved_regs.sicrl); + out_be32(&syscr_regs->sicrh, saved_regs.sicrh); + out_be32(&clock_regs->sccr, saved_regs.sccr); +} + +static void mpc83xx_suspend_save_regs(void) +{ + saved_regs.sicrl = in_be32(&syscr_regs->sicrl); + saved_regs.sicrh = in_be32(&syscr_regs->sicrh); + saved_regs.sccr = in_be32(&clock_regs->sccr); +} + +static int mpc83xx_suspend_enter(suspend_state_t state) +{ + int ret = -EAGAIN; + + /* Don't go to sleep if there's a race where pci_pm_state changes + * between the agent thread checking it and the PM code disabling + * interrupts. + */ + if (wake_from_pci) { + if (pci_pm_state != (deep_sleeping ? 3 : 2)) + goto out; + + out_be32(&pmc_regs->config1, + in_be32(&pmc_regs->config1) | PMCCR1_PME_EN); + } + + /* Put the system into low-power mode and the RAM + * into self-refresh mode once the core goes to + * sleep. + */ + + out_be32(&pmc_regs->config, PMCCR_SLPEN | PMCCR_DLPEN); + + /* If it has deep sleep (i.e. it's an 831x or compatible), + * disable power to the core upon entering sleep mode. This will + * require going through the boot firmware upon a wakeup event. + */ + + if (deep_sleeping) { + mpc83xx_suspend_save_regs(); + + out_be32(&pmc_regs->mask, PMCER_ALL); + + out_be32(&pmc_regs->config1, + in_be32(&pmc_regs->config1) | PMCCR1_POWER_OFF); + + enable_kernel_fp(); + + mpc83xx_enter_deep_sleep(immrbase); + + out_be32(&pmc_regs->config1, + in_be32(&pmc_regs->config1) & ~PMCCR1_POWER_OFF); + + out_be32(&pmc_regs->mask, PMCER_PMCI); + + mpc83xx_suspend_restore_regs(); + } else { + out_be32(&pmc_regs->mask, PMCER_PMCI); + + mpc6xx_enter_standby(); + } + + ret = 0; + +out: + out_be32(&pmc_regs->config1, + in_be32(&pmc_regs->config1) & ~PMCCR1_PME_EN); + + return ret; +} + +static void mpc83xx_suspend_end(void) +{ + deep_sleeping = 0; +} + +static int mpc83xx_suspend_valid(suspend_state_t state) +{ + return state == PM_SUSPEND_STANDBY || state == PM_SUSPEND_MEM; +} + +static int mpc83xx_suspend_begin(suspend_state_t state) +{ + switch (state) { + case PM_SUSPEND_STANDBY: + deep_sleeping = 0; + return 0; + + case PM_SUSPEND_MEM: + if (has_deep_sleep) + deep_sleeping = 1; + + return 0; + + default: + return -EINVAL; + } +} + +static int agent_thread_fn(void *data) +{ + while (1) { + wait_event_interruptible(agent_wq, pci_pm_state >= 2); + try_to_freeze(); + + if (signal_pending(current) || pci_pm_state < 2) + continue; + + /* With a preemptible kernel (or SMP), this could race with + * a userspace-driven suspend request. It's probably best + * to avoid mixing the two with such a configuration (or + * else fix it by adding a mutex to state_store that we can + * synchronize with). + */ + + wake_from_pci = 1; + + pm_suspend(pci_pm_state == 3 ? PM_SUSPEND_MEM : + PM_SUSPEND_STANDBY); + + wake_from_pci = 0; + } + + return 0; +} + +static void mpc83xx_set_agent(void) +{ + out_be32(&pmc_regs->config1, PMCCR1_USE_STATE); + out_be32(&pmc_regs->mask, PMCER_PMCI); + + kthread_run(agent_thread_fn, NULL, "PCI power mgt"); +} + +static int mpc83xx_is_pci_agent(void) +{ + struct mpc83xx_rcw __iomem *rcw_regs; + int ret; + + rcw_regs = ioremap(get_immrbase() + IMMR_RCW_OFFSET, + sizeof(struct mpc83xx_rcw)); + + if (!rcw_regs) + return -ENOMEM; + + ret = !(in_be32(&rcw_regs->rcwhr) & RCW_PCI_HOST); + + iounmap(rcw_regs); + return ret; +} + +static const struct platform_suspend_ops mpc83xx_suspend_ops = { + .valid = mpc83xx_suspend_valid, + .begin = mpc83xx_suspend_begin, + .enter = mpc83xx_suspend_enter, + .end = mpc83xx_suspend_end, +}; + +static const struct of_device_id pmc_match[]; +static int pmc_probe(struct platform_device *ofdev) +{ + const struct of_device_id *match; + struct device_node *np = ofdev->dev.of_node; + struct resource res; + const struct pmc_type *type; + int ret = 0; + + match = of_match_device(pmc_match, &ofdev->dev); + if (!match) + return -EINVAL; + + type = match->data; + + if (!of_device_is_available(np)) + return -ENODEV; + + has_deep_sleep = type->has_deep_sleep; + immrbase = get_immrbase(); + pmc_dev = ofdev; + + is_pci_agent = mpc83xx_is_pci_agent(); + if (is_pci_agent < 0) + return is_pci_agent; + + ret = of_address_to_resource(np, 0, &res); + if (ret) + return -ENODEV; + + pmc_irq = irq_of_parse_and_map(np, 0); + if (pmc_irq) { + ret = request_irq(pmc_irq, pmc_irq_handler, IRQF_SHARED, + "pmc", ofdev); + + if (ret) + return -EBUSY; + } + + pmc_regs = ioremap(res.start, sizeof(*pmc_regs)); + + if (!pmc_regs) { + ret = -ENOMEM; + goto out; + } + + ret = of_address_to_resource(np, 1, &res); + if (ret) { + ret = -ENODEV; + goto out_pmc; + } + + clock_regs = ioremap(res.start, sizeof(*clock_regs)); + + if (!clock_regs) { + ret = -ENOMEM; + goto out_pmc; + } + + if (has_deep_sleep) { + syscr_regs = ioremap(immrbase + IMMR_SYSCR_OFFSET, + sizeof(*syscr_regs)); + if (!syscr_regs) { + ret = -ENOMEM; + goto out_syscr; + } + } + + if (is_pci_agent) + mpc83xx_set_agent(); + + suspend_set_ops(&mpc83xx_suspend_ops); + return 0; + +out_syscr: + iounmap(clock_regs); +out_pmc: + iounmap(pmc_regs); +out: + if (pmc_irq) + free_irq(pmc_irq, ofdev); + + return ret; +} + +static int pmc_remove(struct platform_device *ofdev) +{ + return -EPERM; +}; + +static struct pmc_type pmc_types[] = { + { + .has_deep_sleep = 1, + }, + { + .has_deep_sleep = 0, + } +}; + +static const struct of_device_id pmc_match[] = { + { + .compatible = "fsl,mpc8313-pmc", + .data = &pmc_types[0], + }, + { + .compatible = "fsl,mpc8349-pmc", + .data = &pmc_types[1], + }, + {} +}; + +static struct platform_driver pmc_driver = { + .driver = { + .name = "mpc83xx-pmc", + .of_match_table = pmc_match, + }, + .probe = pmc_probe, + .remove = pmc_remove +}; + +builtin_platform_driver(pmc_driver); diff --git a/arch/powerpc/platforms/83xx/usb.c b/arch/powerpc/platforms/83xx/usb.c new file mode 100644 index 000000000..5c31d8292 --- /dev/null +++ b/arch/powerpc/platforms/83xx/usb.c @@ -0,0 +1,253 @@ +/* + * Freescale 83xx USB SOC setup code + * + * Copyright (C) 2007 Freescale Semiconductor, Inc. + * Author: Li Yang + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/of.h> + +#include <asm/io.h> +#include <asm/prom.h> +#include <sysdev/fsl_soc.h> + +#include "mpc83xx.h" + + +#ifdef CONFIG_PPC_MPC834x +int mpc834x_usb_cfg(void) +{ + unsigned long sccr, sicrl, sicrh; + void __iomem *immap; + struct device_node *np = NULL; + int port0_is_dr = 0, port1_is_dr = 0; + const void *prop, *dr_mode; + + immap = ioremap(get_immrbase(), 0x1000); + if (!immap) + return -ENOMEM; + + /* Read registers */ + /* Note: DR and MPH must use the same clock setting in SCCR */ + sccr = in_be32(immap + MPC83XX_SCCR_OFFS) & ~MPC83XX_SCCR_USB_MASK; + sicrl = in_be32(immap + MPC83XX_SICRL_OFFS) & ~MPC834X_SICRL_USB_MASK; + sicrh = in_be32(immap + MPC83XX_SICRH_OFFS) & ~MPC834X_SICRH_USB_UTMI; + + np = of_find_compatible_node(NULL, NULL, "fsl-usb2-dr"); + if (np) { + sccr |= MPC83XX_SCCR_USB_DRCM_11; /* 1:3 */ + + prop = of_get_property(np, "phy_type", NULL); + port1_is_dr = 1; + if (prop && (!strcmp(prop, "utmi") || + !strcmp(prop, "utmi_wide"))) { + sicrl |= MPC834X_SICRL_USB0 | MPC834X_SICRL_USB1; + sicrh |= MPC834X_SICRH_USB_UTMI; + port0_is_dr = 1; + } else if (prop && !strcmp(prop, "serial")) { + dr_mode = of_get_property(np, "dr_mode", NULL); + if (dr_mode && !strcmp(dr_mode, "otg")) { + sicrl |= MPC834X_SICRL_USB0 | MPC834X_SICRL_USB1; + port0_is_dr = 1; + } else { + sicrl |= MPC834X_SICRL_USB1; + } + } else if (prop && !strcmp(prop, "ulpi")) { + sicrl |= MPC834X_SICRL_USB1; + } else { + printk(KERN_WARNING "834x USB PHY type not supported\n"); + } + of_node_put(np); + } + np = of_find_compatible_node(NULL, NULL, "fsl-usb2-mph"); + if (np) { + sccr |= MPC83XX_SCCR_USB_MPHCM_11; /* 1:3 */ + + prop = of_get_property(np, "port0", NULL); + if (prop) { + if (port0_is_dr) + printk(KERN_WARNING + "834x USB port0 can't be used by both DR and MPH!\n"); + sicrl &= ~MPC834X_SICRL_USB0; + } + prop = of_get_property(np, "port1", NULL); + if (prop) { + if (port1_is_dr) + printk(KERN_WARNING + "834x USB port1 can't be used by both DR and MPH!\n"); + sicrl &= ~MPC834X_SICRL_USB1; + } + of_node_put(np); + } + + /* Write back */ + out_be32(immap + MPC83XX_SCCR_OFFS, sccr); + out_be32(immap + MPC83XX_SICRL_OFFS, sicrl); + out_be32(immap + MPC83XX_SICRH_OFFS, sicrh); + + iounmap(immap); + return 0; +} +#endif /* CONFIG_PPC_MPC834x */ + +#ifdef CONFIG_PPC_MPC831x +int mpc831x_usb_cfg(void) +{ + u32 temp; + void __iomem *immap, *usb_regs; + struct device_node *np = NULL; + struct device_node *immr_node = NULL; + const void *prop; + struct resource res; + int ret = 0; +#ifdef CONFIG_USB_OTG + const void *dr_mode; +#endif + + np = of_find_compatible_node(NULL, NULL, "fsl-usb2-dr"); + if (!np) + return -ENODEV; + prop = of_get_property(np, "phy_type", NULL); + + /* Map IMMR space for pin and clock settings */ + immap = ioremap(get_immrbase(), 0x1000); + if (!immap) { + of_node_put(np); + return -ENOMEM; + } + + /* Configure clock */ + immr_node = of_get_parent(np); + if (immr_node && (of_device_is_compatible(immr_node, "fsl,mpc8315-immr") || + of_device_is_compatible(immr_node, "fsl,mpc8308-immr"))) + clrsetbits_be32(immap + MPC83XX_SCCR_OFFS, + MPC8315_SCCR_USB_MASK, + MPC8315_SCCR_USB_DRCM_01); + else + clrsetbits_be32(immap + MPC83XX_SCCR_OFFS, + MPC83XX_SCCR_USB_MASK, + MPC83XX_SCCR_USB_DRCM_11); + + /* Configure pin mux for ULPI. There is no pin mux for UTMI */ + if (prop && !strcmp(prop, "ulpi")) { + if (of_device_is_compatible(immr_node, "fsl,mpc8308-immr")) { + clrsetbits_be32(immap + MPC83XX_SICRH_OFFS, + MPC8308_SICRH_USB_MASK, + MPC8308_SICRH_USB_ULPI); + } else if (of_device_is_compatible(immr_node, "fsl,mpc8315-immr")) { + clrsetbits_be32(immap + MPC83XX_SICRL_OFFS, + MPC8315_SICRL_USB_MASK, + MPC8315_SICRL_USB_ULPI); + clrsetbits_be32(immap + MPC83XX_SICRH_OFFS, + MPC8315_SICRH_USB_MASK, + MPC8315_SICRH_USB_ULPI); + } else { + clrsetbits_be32(immap + MPC83XX_SICRL_OFFS, + MPC831X_SICRL_USB_MASK, + MPC831X_SICRL_USB_ULPI); + clrsetbits_be32(immap + MPC83XX_SICRH_OFFS, + MPC831X_SICRH_USB_MASK, + MPC831X_SICRH_USB_ULPI); + } + } + + iounmap(immap); + + of_node_put(immr_node); + + /* Map USB SOC space */ + ret = of_address_to_resource(np, 0, &res); + if (ret) { + of_node_put(np); + return ret; + } + usb_regs = ioremap(res.start, resource_size(&res)); + + /* Using on-chip PHY */ + if (prop && (!strcmp(prop, "utmi_wide") || + !strcmp(prop, "utmi"))) { + u32 refsel; + + if (of_device_is_compatible(immr_node, "fsl,mpc8308-immr")) + goto out; + + if (of_device_is_compatible(immr_node, "fsl,mpc8315-immr")) + refsel = CONTROL_REFSEL_24MHZ; + else + refsel = CONTROL_REFSEL_48MHZ; + /* Set UTMI_PHY_EN and REFSEL */ + out_be32(usb_regs + FSL_USB2_CONTROL_OFFS, + CONTROL_UTMI_PHY_EN | refsel); + /* Using external UPLI PHY */ + } else if (prop && !strcmp(prop, "ulpi")) { + /* Set PHY_CLK_SEL to ULPI */ + temp = CONTROL_PHY_CLK_SEL_ULPI; +#ifdef CONFIG_USB_OTG + /* Set OTG_PORT */ + if (!of_device_is_compatible(immr_node, "fsl,mpc8308-immr")) { + dr_mode = of_get_property(np, "dr_mode", NULL); + if (dr_mode && !strcmp(dr_mode, "otg")) + temp |= CONTROL_OTG_PORT; + } +#endif /* CONFIG_USB_OTG */ + out_be32(usb_regs + FSL_USB2_CONTROL_OFFS, temp); + } else { + printk(KERN_WARNING "831x USB PHY type not supported\n"); + ret = -EINVAL; + } + +out: + iounmap(usb_regs); + of_node_put(np); + return ret; +} +#endif /* CONFIG_PPC_MPC831x */ + +#ifdef CONFIG_PPC_MPC837x +int mpc837x_usb_cfg(void) +{ + void __iomem *immap; + struct device_node *np = NULL; + const void *prop; + int ret = 0; + + np = of_find_compatible_node(NULL, NULL, "fsl-usb2-dr"); + if (!np || !of_device_is_available(np)) + return -ENODEV; + prop = of_get_property(np, "phy_type", NULL); + + if (!prop || (strcmp(prop, "ulpi") && strcmp(prop, "serial"))) { + printk(KERN_WARNING "837x USB PHY type not supported\n"); + of_node_put(np); + return -EINVAL; + } + + /* Map IMMR space for pin and clock settings */ + immap = ioremap(get_immrbase(), 0x1000); + if (!immap) { + of_node_put(np); + return -ENOMEM; + } + + /* Configure clock */ + clrsetbits_be32(immap + MPC83XX_SCCR_OFFS, MPC837X_SCCR_USB_DRCM_11, + MPC837X_SCCR_USB_DRCM_11); + + /* Configure pin mux for ULPI/serial */ + clrsetbits_be32(immap + MPC83XX_SICRL_OFFS, MPC837X_SICRL_USB_MASK, + MPC837X_SICRL_USB_ULPI); + + iounmap(immap); + of_node_put(np); + return ret; +} +#endif /* CONFIG_PPC_MPC837x */ |