diff options
Diffstat (limited to 'arch/x86/include/asm/tlbflush.h')
| -rw-r--r-- | arch/x86/include/asm/tlbflush.h | 610 |
1 files changed, 610 insertions, 0 deletions
diff --git a/arch/x86/include/asm/tlbflush.h b/arch/x86/include/asm/tlbflush.h new file mode 100644 index 000000000..79ec7add5 --- /dev/null +++ b/arch/x86/include/asm/tlbflush.h @@ -0,0 +1,610 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_X86_TLBFLUSH_H +#define _ASM_X86_TLBFLUSH_H + +#include <linux/mm.h> +#include <linux/sched.h> + +#include <asm/processor.h> +#include <asm/cpufeature.h> +#include <asm/special_insns.h> +#include <asm/smp.h> +#include <asm/invpcid.h> +#include <asm/pti.h> +#include <asm/processor-flags.h> + +/* + * The x86 feature is called PCID (Process Context IDentifier). It is similar + * to what is traditionally called ASID on the RISC processors. + * + * We don't use the traditional ASID implementation, where each process/mm gets + * its own ASID and flush/restart when we run out of ASID space. + * + * Instead we have a small per-cpu array of ASIDs and cache the last few mm's + * that came by on this CPU, allowing cheaper switch_mm between processes on + * this CPU. + * + * We end up with different spaces for different things. To avoid confusion we + * use different names for each of them: + * + * ASID - [0, TLB_NR_DYN_ASIDS-1] + * the canonical identifier for an mm + * + * kPCID - [1, TLB_NR_DYN_ASIDS] + * the value we write into the PCID part of CR3; corresponds to the + * ASID+1, because PCID 0 is special. + * + * uPCID - [2048 + 1, 2048 + TLB_NR_DYN_ASIDS] + * for KPTI each mm has two address spaces and thus needs two + * PCID values, but we can still do with a single ASID denomination + * for each mm. Corresponds to kPCID + 2048. + * + */ + +/* There are 12 bits of space for ASIDS in CR3 */ +#define CR3_HW_ASID_BITS 12 + +/* + * When enabled, PAGE_TABLE_ISOLATION consumes a single bit for + * user/kernel switches + */ +#ifdef CONFIG_PAGE_TABLE_ISOLATION +# define PTI_CONSUMED_PCID_BITS 1 +#else +# define PTI_CONSUMED_PCID_BITS 0 +#endif + +#define CR3_AVAIL_PCID_BITS (X86_CR3_PCID_BITS - PTI_CONSUMED_PCID_BITS) + +/* + * ASIDs are zero-based: 0->MAX_AVAIL_ASID are valid. -1 below to account + * for them being zero-based. Another -1 is because PCID 0 is reserved for + * use by non-PCID-aware users. + */ +#define MAX_ASID_AVAILABLE ((1 << CR3_AVAIL_PCID_BITS) - 2) + +/* + * 6 because 6 should be plenty and struct tlb_state will fit in two cache + * lines. + */ +#define TLB_NR_DYN_ASIDS 6 + +/* + * Given @asid, compute kPCID + */ +static inline u16 kern_pcid(u16 asid) +{ + VM_WARN_ON_ONCE(asid > MAX_ASID_AVAILABLE); + +#ifdef CONFIG_PAGE_TABLE_ISOLATION + /* + * Make sure that the dynamic ASID space does not confict with the + * bit we are using to switch between user and kernel ASIDs. + */ + BUILD_BUG_ON(TLB_NR_DYN_ASIDS >= (1 << X86_CR3_PTI_PCID_USER_BIT)); + + /* + * The ASID being passed in here should have respected the + * MAX_ASID_AVAILABLE and thus never have the switch bit set. + */ + VM_WARN_ON_ONCE(asid & (1 << X86_CR3_PTI_PCID_USER_BIT)); +#endif + /* + * The dynamically-assigned ASIDs that get passed in are small + * (<TLB_NR_DYN_ASIDS). They never have the high switch bit set, + * so do not bother to clear it. + * + * If PCID is on, ASID-aware code paths put the ASID+1 into the + * PCID bits. This serves two purposes. It prevents a nasty + * situation in which PCID-unaware code saves CR3, loads some other + * value (with PCID == 0), and then restores CR3, thus corrupting + * the TLB for ASID 0 if the saved ASID was nonzero. It also means + * that any bugs involving loading a PCID-enabled CR3 with + * CR4.PCIDE off will trigger deterministically. + */ + return asid + 1; +} + +/* + * Given @asid, compute uPCID + */ +static inline u16 user_pcid(u16 asid) +{ + u16 ret = kern_pcid(asid); +#ifdef CONFIG_PAGE_TABLE_ISOLATION + ret |= 1 << X86_CR3_PTI_PCID_USER_BIT; +#endif + return ret; +} + +struct pgd_t; +static inline unsigned long build_cr3(pgd_t *pgd, u16 asid) +{ + if (static_cpu_has(X86_FEATURE_PCID)) { + return __sme_pa(pgd) | kern_pcid(asid); + } else { + VM_WARN_ON_ONCE(asid != 0); + return __sme_pa(pgd); + } +} + +static inline unsigned long build_cr3_noflush(pgd_t *pgd, u16 asid) +{ + VM_WARN_ON_ONCE(asid > MAX_ASID_AVAILABLE); + /* + * Use boot_cpu_has() instead of this_cpu_has() as this function + * might be called during early boot. This should work even after + * boot because all CPU's the have same capabilities: + */ + VM_WARN_ON_ONCE(!boot_cpu_has(X86_FEATURE_PCID)); + return __sme_pa(pgd) | kern_pcid(asid) | CR3_NOFLUSH; +} + +#ifdef CONFIG_PARAVIRT +#include <asm/paravirt.h> +#else +#define __flush_tlb() __native_flush_tlb() +#define __flush_tlb_global() __native_flush_tlb_global() +#define __flush_tlb_one_user(addr) __native_flush_tlb_one_user(addr) +#endif + +static inline bool tlb_defer_switch_to_init_mm(void) +{ + /* + * If we have PCID, then switching to init_mm is reasonably + * fast. If we don't have PCID, then switching to init_mm is + * quite slow, so we try to defer it in the hopes that we can + * avoid it entirely. The latter approach runs the risk of + * receiving otherwise unnecessary IPIs. + * + * This choice is just a heuristic. The tlb code can handle this + * function returning true or false regardless of whether we have + * PCID. + */ + return !static_cpu_has(X86_FEATURE_PCID); +} + +struct tlb_context { + u64 ctx_id; + u64 tlb_gen; +}; + +struct tlb_state { + /* + * cpu_tlbstate.loaded_mm should match CR3 whenever interrupts + * are on. This means that it may not match current->active_mm, + * which will contain the previous user mm when we're in lazy TLB + * mode even if we've already switched back to swapper_pg_dir. + * + * During switch_mm_irqs_off(), loaded_mm will be set to + * LOADED_MM_SWITCHING during the brief interrupts-off window + * when CR3 and loaded_mm would otherwise be inconsistent. This + * is for nmi_uaccess_okay()'s benefit. + */ + struct mm_struct *loaded_mm; + +#define LOADED_MM_SWITCHING ((struct mm_struct *)1) + + /* Last user mm for optimizing IBPB */ + union { + struct mm_struct *last_user_mm; + unsigned long last_user_mm_ibpb; + }; + + u16 loaded_mm_asid; + u16 next_asid; + + /* + * We can be in one of several states: + * + * - Actively using an mm. Our CPU's bit will be set in + * mm_cpumask(loaded_mm) and is_lazy == false; + * + * - Not using a real mm. loaded_mm == &init_mm. Our CPU's bit + * will not be set in mm_cpumask(&init_mm) and is_lazy == false. + * + * - Lazily using a real mm. loaded_mm != &init_mm, our bit + * is set in mm_cpumask(loaded_mm), but is_lazy == true. + * We're heuristically guessing that the CR3 load we + * skipped more than makes up for the overhead added by + * lazy mode. + */ + bool is_lazy; + + /* + * If set we changed the page tables in such a way that we + * needed an invalidation of all contexts (aka. PCIDs / ASIDs). + * This tells us to go invalidate all the non-loaded ctxs[] + * on the next context switch. + * + * The current ctx was kept up-to-date as it ran and does not + * need to be invalidated. + */ + bool invalidate_other; + + /* + * Mask that contains TLB_NR_DYN_ASIDS+1 bits to indicate + * the corresponding user PCID needs a flush next time we + * switch to it; see SWITCH_TO_USER_CR3. + */ + unsigned short user_pcid_flush_mask; + + /* + * Access to this CR4 shadow and to H/W CR4 is protected by + * disabling interrupts when modifying either one. + */ + unsigned long cr4; + + /* + * This is a list of all contexts that might exist in the TLB. + * There is one per ASID that we use, and the ASID (what the + * CPU calls PCID) is the index into ctxts. + * + * For each context, ctx_id indicates which mm the TLB's user + * entries came from. As an invariant, the TLB will never + * contain entries that are out-of-date as when that mm reached + * the tlb_gen in the list. + * + * To be clear, this means that it's legal for the TLB code to + * flush the TLB without updating tlb_gen. This can happen + * (for now, at least) due to paravirt remote flushes. + * + * NB: context 0 is a bit special, since it's also used by + * various bits of init code. This is fine -- code that + * isn't aware of PCID will end up harmlessly flushing + * context 0. + */ + struct tlb_context ctxs[TLB_NR_DYN_ASIDS]; +}; +DECLARE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate); + +/* + * Blindly accessing user memory from NMI context can be dangerous + * if we're in the middle of switching the current user task or + * switching the loaded mm. It can also be dangerous if we + * interrupted some kernel code that was temporarily using a + * different mm. + */ +static inline bool nmi_uaccess_okay(void) +{ + struct mm_struct *loaded_mm = this_cpu_read(cpu_tlbstate.loaded_mm); + struct mm_struct *current_mm = current->mm; + + VM_WARN_ON_ONCE(!loaded_mm); + + /* + * The condition we want to check is + * current_mm->pgd == __va(read_cr3_pa()). This may be slow, though, + * if we're running in a VM with shadow paging, and nmi_uaccess_okay() + * is supposed to be reasonably fast. + * + * Instead, we check the almost equivalent but somewhat conservative + * condition below, and we rely on the fact that switch_mm_irqs_off() + * sets loaded_mm to LOADED_MM_SWITCHING before writing to CR3. + */ + if (loaded_mm != current_mm) + return false; + + VM_WARN_ON_ONCE(current_mm->pgd != __va(read_cr3_pa())); + + return true; +} + +/* Initialize cr4 shadow for this CPU. */ +static inline void cr4_init_shadow(void) +{ + this_cpu_write(cpu_tlbstate.cr4, __read_cr4()); +} + +static inline void __cr4_set(unsigned long cr4) +{ + lockdep_assert_irqs_disabled(); + this_cpu_write(cpu_tlbstate.cr4, cr4); + __write_cr4(cr4); +} + +/* Set in this cpu's CR4. */ +static inline void cr4_set_bits(unsigned long mask) +{ + unsigned long cr4, flags; + + local_irq_save(flags); + cr4 = this_cpu_read(cpu_tlbstate.cr4); + if ((cr4 | mask) != cr4) + __cr4_set(cr4 | mask); + local_irq_restore(flags); +} + +/* Clear in this cpu's CR4. */ +static inline void cr4_clear_bits(unsigned long mask) +{ + unsigned long cr4, flags; + + local_irq_save(flags); + cr4 = this_cpu_read(cpu_tlbstate.cr4); + if ((cr4 & ~mask) != cr4) + __cr4_set(cr4 & ~mask); + local_irq_restore(flags); +} + +static inline void cr4_toggle_bits_irqsoff(unsigned long mask) +{ + unsigned long cr4; + + cr4 = this_cpu_read(cpu_tlbstate.cr4); + __cr4_set(cr4 ^ mask); +} + +/* Read the CR4 shadow. */ +static inline unsigned long cr4_read_shadow(void) +{ + return this_cpu_read(cpu_tlbstate.cr4); +} + +/* + * Mark all other ASIDs as invalid, preserves the current. + */ +static inline void invalidate_other_asid(void) +{ + this_cpu_write(cpu_tlbstate.invalidate_other, true); +} + +/* + * Save some of cr4 feature set we're using (e.g. Pentium 4MB + * enable and PPro Global page enable), so that any CPU's that boot + * up after us can get the correct flags. This should only be used + * during boot on the boot cpu. + */ +extern unsigned long mmu_cr4_features; +extern u32 *trampoline_cr4_features; + +static inline void cr4_set_bits_and_update_boot(unsigned long mask) +{ + mmu_cr4_features |= mask; + if (trampoline_cr4_features) + *trampoline_cr4_features = mmu_cr4_features; + cr4_set_bits(mask); +} + +extern void initialize_tlbstate_and_flush(void); + +/* + * Given an ASID, flush the corresponding user ASID. We can delay this + * until the next time we switch to it. + * + * See SWITCH_TO_USER_CR3. + */ +static inline void invalidate_user_asid(u16 asid) +{ + /* There is no user ASID if address space separation is off */ + if (!IS_ENABLED(CONFIG_PAGE_TABLE_ISOLATION)) + return; + + /* + * We only have a single ASID if PCID is off and the CR3 + * write will have flushed it. + */ + if (!cpu_feature_enabled(X86_FEATURE_PCID)) + return; + + if (!static_cpu_has(X86_FEATURE_PTI)) + return; + + __set_bit(kern_pcid(asid), + (unsigned long *)this_cpu_ptr(&cpu_tlbstate.user_pcid_flush_mask)); +} + +/* + * flush the entire current user mapping + */ +static inline void __native_flush_tlb(void) +{ + /* + * Preemption or interrupts must be disabled to protect the access + * to the per CPU variable and to prevent being preempted between + * read_cr3() and write_cr3(). + */ + WARN_ON_ONCE(preemptible()); + + invalidate_user_asid(this_cpu_read(cpu_tlbstate.loaded_mm_asid)); + + /* If current->mm == NULL then the read_cr3() "borrows" an mm */ + native_write_cr3(__native_read_cr3()); +} + +/* + * flush everything + */ +static inline void __native_flush_tlb_global(void) +{ + unsigned long cr4, flags; + + if (static_cpu_has(X86_FEATURE_INVPCID)) { + /* + * Using INVPCID is considerably faster than a pair of writes + * to CR4 sandwiched inside an IRQ flag save/restore. + * + * Note, this works with CR4.PCIDE=0 or 1. + */ + invpcid_flush_all(); + return; + } + + /* + * Read-modify-write to CR4 - protect it from preemption and + * from interrupts. (Use the raw variant because this code can + * be called from deep inside debugging code.) + */ + raw_local_irq_save(flags); + + cr4 = this_cpu_read(cpu_tlbstate.cr4); + /* toggle PGE */ + native_write_cr4(cr4 ^ X86_CR4_PGE); + /* write old PGE again and flush TLBs */ + native_write_cr4(cr4); + + raw_local_irq_restore(flags); +} + +/* + * flush one page in the user mapping + */ +static inline void __native_flush_tlb_one_user(unsigned long addr) +{ + u32 loaded_mm_asid = this_cpu_read(cpu_tlbstate.loaded_mm_asid); + + asm volatile("invlpg (%0)" ::"r" (addr) : "memory"); + + if (!static_cpu_has(X86_FEATURE_PTI)) + return; + + /* + * Some platforms #GP if we call invpcid(type=1/2) before CR4.PCIDE=1. + * Just use invalidate_user_asid() in case we are called early. + */ + if (!this_cpu_has(X86_FEATURE_INVPCID_SINGLE)) + invalidate_user_asid(loaded_mm_asid); + else + invpcid_flush_one(user_pcid(loaded_mm_asid), addr); +} + +/* + * flush everything + */ +static inline void __flush_tlb_all(void) +{ + /* + * This is to catch users with enabled preemption and the PGE feature + * and don't trigger the warning in __native_flush_tlb(). + */ + VM_WARN_ON_ONCE(preemptible()); + + if (boot_cpu_has(X86_FEATURE_PGE)) { + __flush_tlb_global(); + } else { + /* + * !PGE -> !PCID (setup_pcid()), thus every flush is total. + */ + __flush_tlb(); + } +} + +/* + * flush one page in the kernel mapping + */ +static inline void __flush_tlb_one_kernel(unsigned long addr) +{ + count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ONE); + + /* + * If PTI is off, then __flush_tlb_one_user() is just INVLPG or its + * paravirt equivalent. Even with PCID, this is sufficient: we only + * use PCID if we also use global PTEs for the kernel mapping, and + * INVLPG flushes global translations across all address spaces. + * + * If PTI is on, then the kernel is mapped with non-global PTEs, and + * __flush_tlb_one_user() will flush the given address for the current + * kernel address space and for its usermode counterpart, but it does + * not flush it for other address spaces. + */ + __flush_tlb_one_user(addr); + + if (!static_cpu_has(X86_FEATURE_PTI)) + return; + + /* + * See above. We need to propagate the flush to all other address + * spaces. In principle, we only need to propagate it to kernelmode + * address spaces, but the extra bookkeeping we would need is not + * worth it. + */ + invalidate_other_asid(); +} + +#define TLB_FLUSH_ALL -1UL + +/* + * TLB flushing: + * + * - flush_tlb_all() flushes all processes TLBs + * - flush_tlb_mm(mm) flushes the specified mm context TLB's + * - flush_tlb_page(vma, vmaddr) flushes one page + * - flush_tlb_range(vma, start, end) flushes a range of pages + * - flush_tlb_kernel_range(start, end) flushes a range of kernel pages + * - flush_tlb_others(cpumask, info) flushes TLBs on other cpus + * + * ..but the i386 has somewhat limited tlb flushing capabilities, + * and page-granular flushes are available only on i486 and up. + */ +struct flush_tlb_info { + /* + * We support several kinds of flushes. + * + * - Fully flush a single mm. .mm will be set, .end will be + * TLB_FLUSH_ALL, and .new_tlb_gen will be the tlb_gen to + * which the IPI sender is trying to catch us up. + * + * - Partially flush a single mm. .mm will be set, .start and + * .end will indicate the range, and .new_tlb_gen will be set + * such that the changes between generation .new_tlb_gen-1 and + * .new_tlb_gen are entirely contained in the indicated range. + * + * - Fully flush all mms whose tlb_gens have been updated. .mm + * will be NULL, .end will be TLB_FLUSH_ALL, and .new_tlb_gen + * will be zero. + */ + struct mm_struct *mm; + unsigned long start; + unsigned long end; + u64 new_tlb_gen; +}; + +#define local_flush_tlb() __flush_tlb() + +#define flush_tlb_mm(mm) flush_tlb_mm_range(mm, 0UL, TLB_FLUSH_ALL, 0UL) + +#define flush_tlb_range(vma, start, end) \ + flush_tlb_mm_range(vma->vm_mm, start, end, vma->vm_flags) + +extern void flush_tlb_all(void); +extern void flush_tlb_mm_range(struct mm_struct *mm, unsigned long start, + unsigned long end, unsigned long vmflag); +extern void flush_tlb_kernel_range(unsigned long start, unsigned long end); + +static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long a) +{ + flush_tlb_mm_range(vma->vm_mm, a, a + PAGE_SIZE, VM_NONE); +} + +void native_flush_tlb_others(const struct cpumask *cpumask, + const struct flush_tlb_info *info); + +static inline u64 inc_mm_tlb_gen(struct mm_struct *mm) +{ + /* + * Bump the generation count. This also serves as a full barrier + * that synchronizes with switch_mm(): callers are required to order + * their read of mm_cpumask after their writes to the paging + * structures. + */ + return atomic64_inc_return(&mm->context.tlb_gen); +} + +static inline void arch_tlbbatch_add_mm(struct arch_tlbflush_unmap_batch *batch, + struct mm_struct *mm) +{ + inc_mm_tlb_gen(mm); + cpumask_or(&batch->cpumask, &batch->cpumask, mm_cpumask(mm)); +} + +extern void arch_tlbbatch_flush(struct arch_tlbflush_unmap_batch *batch); + +#ifndef CONFIG_PARAVIRT +#define flush_tlb_others(mask, info) \ + native_flush_tlb_others(mask, info) + +#define paravirt_tlb_remove_table(tlb, page) \ + tlb_remove_page(tlb, (void *)(page)) +#endif + +#endif /* _ASM_X86_TLBFLUSH_H */ |