diff options
Diffstat (limited to 'drivers/hid/hid-holtekff.c')
| -rw-r--r-- | drivers/hid/hid-holtekff.c | 231 |
1 files changed, 231 insertions, 0 deletions
diff --git a/drivers/hid/hid-holtekff.c b/drivers/hid/hid-holtekff.c new file mode 100644 index 000000000..c68486ee2 --- /dev/null +++ b/drivers/hid/hid-holtekff.c @@ -0,0 +1,231 @@ +/* + * Force feedback support for Holtek On Line Grip based gamepads + * + * These include at least a Brazilian "Clone Joypad Super Power Fire" + * which uses vendor ID 0x1241 and identifies as "HOLTEK On Line Grip". + * + * Copyright (c) 2011 Anssi Hannula <anssi.hannula@iki.fi> + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/hid.h> +#include <linux/input.h> +#include <linux/module.h> +#include <linux/slab.h> + +#include "hid-ids.h" + +#ifdef CONFIG_HOLTEK_FF + +/* + * These commands and parameters are currently known: + * + * byte 0: command id: + * 01 set effect parameters + * 02 play specified effect + * 03 stop specified effect + * 04 stop all effects + * 06 stop all effects + * (the difference between 04 and 06 isn't known; win driver + * sends 06,04 on application init, and 06 otherwise) + * + * Commands 01 and 02 need to be sent as pairs, i.e. you need to send 01 + * before each 02. + * + * The rest of the bytes are parameters. Command 01 takes all of them, and + * commands 02,03 take only the effect id. + * + * byte 1: + * bits 0-3: effect id: + * 1: very strong rumble + * 2: periodic rumble, short intervals + * 3: very strong rumble + * 4: periodic rumble, long intervals + * 5: weak periodic rumble, long intervals + * 6: weak periodic rumble, short intervals + * 7: periodic rumble, short intervals + * 8: strong periodic rumble, short intervals + * 9: very strong rumble + * a: causes an error + * b: very strong periodic rumble, very short intervals + * c-f: nothing + * bit 6: right (weak) motor enabled + * bit 7: left (strong) motor enabled + * + * bytes 2-3: time in milliseconds, big-endian + * bytes 5-6: unknown (win driver seems to use at least 10e0 with effect 1 + * and 0014 with effect 6) + * byte 7: + * bits 0-3: effect magnitude + */ + +#define HOLTEKFF_MSG_LENGTH 7 + +static const u8 start_effect_1[] = { 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00 }; +static const u8 stop_all4[] = { 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; +static const u8 stop_all6[] = { 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; + +struct holtekff_device { + struct hid_field *field; +}; + +static void holtekff_send(struct holtekff_device *holtekff, + struct hid_device *hid, + const u8 data[HOLTEKFF_MSG_LENGTH]) +{ + int i; + + for (i = 0; i < HOLTEKFF_MSG_LENGTH; i++) { + holtekff->field->value[i] = data[i]; + } + + dbg_hid("sending %7ph\n", data); + + hid_hw_request(hid, holtekff->field->report, HID_REQ_SET_REPORT); +} + +static int holtekff_play(struct input_dev *dev, void *data, + struct ff_effect *effect) +{ + struct hid_device *hid = input_get_drvdata(dev); + struct holtekff_device *holtekff = data; + int left, right; + /* effect type 1, length 65535 msec */ + u8 buf[HOLTEKFF_MSG_LENGTH] = + { 0x01, 0x01, 0xff, 0xff, 0x10, 0xe0, 0x00 }; + + left = effect->u.rumble.strong_magnitude; + right = effect->u.rumble.weak_magnitude; + dbg_hid("called with 0x%04x 0x%04x\n", left, right); + + if (!left && !right) { + holtekff_send(holtekff, hid, stop_all6); + return 0; + } + + if (left) + buf[1] |= 0x80; + if (right) + buf[1] |= 0x40; + + /* The device takes a single magnitude, so we just sum them up. */ + buf[6] = min(0xf, (left >> 12) + (right >> 12)); + + holtekff_send(holtekff, hid, buf); + holtekff_send(holtekff, hid, start_effect_1); + + return 0; +} + +static int holtekff_init(struct hid_device *hid) +{ + struct holtekff_device *holtekff; + struct hid_report *report; + struct hid_input *hidinput; + struct list_head *report_list = + &hid->report_enum[HID_OUTPUT_REPORT].report_list; + struct input_dev *dev; + int error; + + if (list_empty(&hid->inputs)) { + hid_err(hid, "no inputs found\n"); + return -ENODEV; + } + hidinput = list_entry(hid->inputs.next, struct hid_input, list); + dev = hidinput->input; + + if (list_empty(report_list)) { + hid_err(hid, "no output report found\n"); + return -ENODEV; + } + + report = list_entry(report_list->next, struct hid_report, list); + + if (report->maxfield < 1 || report->field[0]->report_count != 7) { + hid_err(hid, "unexpected output report layout\n"); + return -ENODEV; + } + + holtekff = kzalloc(sizeof(*holtekff), GFP_KERNEL); + if (!holtekff) + return -ENOMEM; + + set_bit(FF_RUMBLE, dev->ffbit); + + holtekff->field = report->field[0]; + + /* initialize the same way as win driver does */ + holtekff_send(holtekff, hid, stop_all4); + holtekff_send(holtekff, hid, stop_all6); + + error = input_ff_create_memless(dev, holtekff, holtekff_play); + if (error) { + kfree(holtekff); + return error; + } + + hid_info(hid, "Force feedback for Holtek On Line Grip based devices by Anssi Hannula <anssi.hannula@iki.fi>\n"); + + return 0; +} +#else +static inline int holtekff_init(struct hid_device *hid) +{ + return 0; +} +#endif + +static int holtek_probe(struct hid_device *hdev, const struct hid_device_id *id) +{ + int ret; + + ret = hid_parse(hdev); + if (ret) { + hid_err(hdev, "parse failed\n"); + goto err; + } + + ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT & ~HID_CONNECT_FF); + if (ret) { + hid_err(hdev, "hw start failed\n"); + goto err; + } + + holtekff_init(hdev); + + return 0; +err: + return ret; +} + +static const struct hid_device_id holtek_devices[] = { + { HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK, USB_DEVICE_ID_HOLTEK_ON_LINE_GRIP) }, + { } +}; +MODULE_DEVICE_TABLE(hid, holtek_devices); + +static struct hid_driver holtek_driver = { + .name = "holtek", + .id_table = holtek_devices, + .probe = holtek_probe, +}; +module_hid_driver(holtek_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Anssi Hannula <anssi.hannula@iki.fi>"); +MODULE_DESCRIPTION("Force feedback support for Holtek On Line Grip based devices"); |