diff options
Diffstat (limited to 'drivers/ide/opti621.c')
| -rw-r--r-- | drivers/ide/opti621.c | 178 |
1 files changed, 178 insertions, 0 deletions
diff --git a/drivers/ide/opti621.c b/drivers/ide/opti621.c new file mode 100644 index 000000000..26a45007e --- /dev/null +++ b/drivers/ide/opti621.c @@ -0,0 +1,178 @@ +/* + * Copyright (C) 1996-1998 Linus Torvalds & authors (see below) + */ + +/* + * Authors: + * Jaromir Koutek <miri@punknet.cz>, + * Jan Harkes <jaharkes@cwi.nl>, + * Mark Lord <mlord@pobox.com> + * Some parts of code are from ali14xx.c and from rz1000.c. + */ + +#include <linux/types.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/ide.h> + +#include <asm/io.h> + +#define DRV_NAME "opti621" + +#define READ_REG 0 /* index of Read cycle timing register */ +#define WRITE_REG 1 /* index of Write cycle timing register */ +#define CNTRL_REG 3 /* index of Control register */ +#define STRAP_REG 5 /* index of Strap register */ +#define MISC_REG 6 /* index of Miscellaneous register */ + +static int reg_base; + +static DEFINE_SPINLOCK(opti621_lock); + +/* Write value to register reg, base of register + * is at reg_base (0x1f0 primary, 0x170 secondary, + * if not changed by PCI configuration). + * This is from setupvic.exe program. + */ +static void write_reg(u8 value, int reg) +{ + inw(reg_base + 1); + inw(reg_base + 1); + outb(3, reg_base + 2); + outb(value, reg_base + reg); + outb(0x83, reg_base + 2); +} + +/* Read value from register reg, base of register + * is at reg_base (0x1f0 primary, 0x170 secondary, + * if not changed by PCI configuration). + * This is from setupvic.exe program. + */ +static u8 read_reg(int reg) +{ + u8 ret = 0; + + inw(reg_base + 1); + inw(reg_base + 1); + outb(3, reg_base + 2); + ret = inb(reg_base + reg); + outb(0x83, reg_base + 2); + + return ret; +} + +static void opti621_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) +{ + ide_drive_t *pair = ide_get_pair_dev(drive); + unsigned long flags; + unsigned long mode = drive->pio_mode, pair_mode; + const u8 pio = mode - XFER_PIO_0; + u8 tim, misc, addr_pio = pio, clk; + + /* DRDY is default 2 (by OPTi Databook) */ + static const u8 addr_timings[2][5] = { + { 0x20, 0x10, 0x00, 0x00, 0x00 }, /* 33 MHz */ + { 0x10, 0x10, 0x00, 0x00, 0x00 }, /* 25 MHz */ + }; + static const u8 data_rec_timings[2][5] = { + { 0x5b, 0x45, 0x32, 0x21, 0x20 }, /* 33 MHz */ + { 0x48, 0x34, 0x21, 0x10, 0x10 } /* 25 MHz */ + }; + + ide_set_drivedata(drive, (void *)mode); + + if (pair) { + pair_mode = (unsigned long)ide_get_drivedata(pair); + if (pair_mode && pair_mode < mode) + addr_pio = pair_mode - XFER_PIO_0; + } + + spin_lock_irqsave(&opti621_lock, flags); + + reg_base = hwif->io_ports.data_addr; + + /* allow Register-B */ + outb(0xc0, reg_base + CNTRL_REG); + /* hmm, setupvic.exe does this ;-) */ + outb(0xff, reg_base + 5); + /* if reads 0xff, adapter not exist? */ + (void)inb(reg_base + CNTRL_REG); + /* if reads 0xc0, no interface exist? */ + read_reg(CNTRL_REG); + + /* check CLK speed */ + clk = read_reg(STRAP_REG) & 1; + + printk(KERN_INFO "%s: CLK = %d MHz\n", hwif->name, clk ? 25 : 33); + + tim = data_rec_timings[clk][pio]; + misc = addr_timings[clk][addr_pio]; + + /* select Index-0/1 for Register-A/B */ + write_reg(drive->dn & 1, MISC_REG); + /* set read cycle timings */ + write_reg(tim, READ_REG); + /* set write cycle timings */ + write_reg(tim, WRITE_REG); + + /* use Register-A for drive 0 */ + /* use Register-B for drive 1 */ + write_reg(0x85, CNTRL_REG); + + /* set address setup, DRDY timings, */ + /* and read prefetch for both drives */ + write_reg(misc, MISC_REG); + + spin_unlock_irqrestore(&opti621_lock, flags); +} + +static const struct ide_port_ops opti621_port_ops = { + .set_pio_mode = opti621_set_pio_mode, +}; + +static const struct ide_port_info opti621_chipset = { + .name = DRV_NAME, + .enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} }, + .port_ops = &opti621_port_ops, + .host_flags = IDE_HFLAG_NO_DMA, + .pio_mask = ATA_PIO4, +}; + +static int opti621_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + return ide_pci_init_one(dev, &opti621_chipset, NULL); +} + +static const struct pci_device_id opti621_pci_tbl[] = { + { PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C621), 0 }, + { PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C825), 0 }, + { 0, }, +}; +MODULE_DEVICE_TABLE(pci, opti621_pci_tbl); + +static struct pci_driver opti621_pci_driver = { + .name = "Opti621_IDE", + .id_table = opti621_pci_tbl, + .probe = opti621_init_one, + .remove = ide_pci_remove, + .suspend = ide_pci_suspend, + .resume = ide_pci_resume, +}; + +static int __init opti621_ide_init(void) +{ + return ide_pci_register_driver(&opti621_pci_driver); +} + +static void __exit opti621_ide_exit(void) +{ + pci_unregister_driver(&opti621_pci_driver); +} + +module_init(opti621_ide_init); +module_exit(opti621_ide_exit); + +MODULE_AUTHOR("Jaromir Koutek, Jan Harkes, Mark Lord"); +MODULE_DESCRIPTION("PCI driver module for Opti621 IDE"); +MODULE_LICENSE("GPL"); |