diff options
Diffstat (limited to 'drivers/infiniband/hw/hfi1/qsfp.c')
| -rw-r--r-- | drivers/infiniband/hw/hfi1/qsfp.c | 858 |
1 files changed, 858 insertions, 0 deletions
diff --git a/drivers/infiniband/hw/hfi1/qsfp.c b/drivers/infiniband/hw/hfi1/qsfp.c new file mode 100644 index 000000000..b5966991d --- /dev/null +++ b/drivers/infiniband/hw/hfi1/qsfp.c @@ -0,0 +1,858 @@ +/* + * Copyright(c) 2015, 2016 Intel Corporation. + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#include <linux/delay.h> +#include <linux/pci.h> +#include <linux/vmalloc.h> + +#include "hfi.h" + +/* for the given bus number, return the CSR for reading an i2c line */ +static inline u32 i2c_in_csr(u32 bus_num) +{ + return bus_num ? ASIC_QSFP2_IN : ASIC_QSFP1_IN; +} + +/* for the given bus number, return the CSR for writing an i2c line */ +static inline u32 i2c_oe_csr(u32 bus_num) +{ + return bus_num ? ASIC_QSFP2_OE : ASIC_QSFP1_OE; +} + +static void hfi1_setsda(void *data, int state) +{ + struct hfi1_i2c_bus *bus = (struct hfi1_i2c_bus *)data; + struct hfi1_devdata *dd = bus->controlling_dd; + u64 reg; + u32 target_oe; + + target_oe = i2c_oe_csr(bus->num); + reg = read_csr(dd, target_oe); + /* + * The OE bit value is inverted and connected to the pin. When + * OE is 0 the pin is left to be pulled up, when the OE is 1 + * the pin is driven low. This matches the "open drain" or "open + * collector" convention. + */ + if (state) + reg &= ~QSFP_HFI0_I2CDAT; + else + reg |= QSFP_HFI0_I2CDAT; + write_csr(dd, target_oe, reg); + /* do a read to force the write into the chip */ + (void)read_csr(dd, target_oe); +} + +static void hfi1_setscl(void *data, int state) +{ + struct hfi1_i2c_bus *bus = (struct hfi1_i2c_bus *)data; + struct hfi1_devdata *dd = bus->controlling_dd; + u64 reg; + u32 target_oe; + + target_oe = i2c_oe_csr(bus->num); + reg = read_csr(dd, target_oe); + /* + * The OE bit value is inverted and connected to the pin. When + * OE is 0 the pin is left to be pulled up, when the OE is 1 + * the pin is driven low. This matches the "open drain" or "open + * collector" convention. + */ + if (state) + reg &= ~QSFP_HFI0_I2CCLK; + else + reg |= QSFP_HFI0_I2CCLK; + write_csr(dd, target_oe, reg); + /* do a read to force the write into the chip */ + (void)read_csr(dd, target_oe); +} + +static int hfi1_getsda(void *data) +{ + struct hfi1_i2c_bus *bus = (struct hfi1_i2c_bus *)data; + u64 reg; + u32 target_in; + + hfi1_setsda(data, 1); /* clear OE so we do not pull line down */ + udelay(2); /* 1us pull up + 250ns hold */ + + target_in = i2c_in_csr(bus->num); + reg = read_csr(bus->controlling_dd, target_in); + return !!(reg & QSFP_HFI0_I2CDAT); +} + +static int hfi1_getscl(void *data) +{ + struct hfi1_i2c_bus *bus = (struct hfi1_i2c_bus *)data; + u64 reg; + u32 target_in; + + hfi1_setscl(data, 1); /* clear OE so we do not pull line down */ + udelay(2); /* 1us pull up + 250ns hold */ + + target_in = i2c_in_csr(bus->num); + reg = read_csr(bus->controlling_dd, target_in); + return !!(reg & QSFP_HFI0_I2CCLK); +} + +/* + * Allocate and initialize the given i2c bus number. + * Returns NULL on failure. + */ +static struct hfi1_i2c_bus *init_i2c_bus(struct hfi1_devdata *dd, + struct hfi1_asic_data *ad, int num) +{ + struct hfi1_i2c_bus *bus; + int ret; + + bus = kzalloc(sizeof(*bus), GFP_KERNEL); + if (!bus) + return NULL; + + bus->controlling_dd = dd; + bus->num = num; /* our bus number */ + + bus->algo.setsda = hfi1_setsda; + bus->algo.setscl = hfi1_setscl; + bus->algo.getsda = hfi1_getsda; + bus->algo.getscl = hfi1_getscl; + bus->algo.udelay = 5; + bus->algo.timeout = usecs_to_jiffies(100000); + bus->algo.data = bus; + + bus->adapter.owner = THIS_MODULE; + bus->adapter.algo_data = &bus->algo; + bus->adapter.dev.parent = &dd->pcidev->dev; + snprintf(bus->adapter.name, sizeof(bus->adapter.name), + "hfi1_i2c%d", num); + + ret = i2c_bit_add_bus(&bus->adapter); + if (ret) { + dd_dev_info(dd, "%s: unable to add i2c bus %d, err %d\n", + __func__, num, ret); + kfree(bus); + return NULL; + } + + return bus; +} + +/* + * Initialize i2c buses. + * Return 0 on success, -errno on error. + */ +int set_up_i2c(struct hfi1_devdata *dd, struct hfi1_asic_data *ad) +{ + ad->i2c_bus0 = init_i2c_bus(dd, ad, 0); + ad->i2c_bus1 = init_i2c_bus(dd, ad, 1); + if (!ad->i2c_bus0 || !ad->i2c_bus1) + return -ENOMEM; + return 0; +}; + +static void clean_i2c_bus(struct hfi1_i2c_bus *bus) +{ + if (bus) { + i2c_del_adapter(&bus->adapter); + kfree(bus); + } +} + +void clean_up_i2c(struct hfi1_devdata *dd, struct hfi1_asic_data *ad) +{ + if (!ad) + return; + clean_i2c_bus(ad->i2c_bus0); + ad->i2c_bus0 = NULL; + clean_i2c_bus(ad->i2c_bus1); + ad->i2c_bus1 = NULL; +} + +static int i2c_bus_write(struct hfi1_devdata *dd, struct hfi1_i2c_bus *i2c, + u8 slave_addr, int offset, int offset_size, + u8 *data, u16 len) +{ + int ret; + int num_msgs; + u8 offset_bytes[2]; + struct i2c_msg msgs[2]; + + switch (offset_size) { + case 0: + num_msgs = 1; + msgs[0].addr = slave_addr; + msgs[0].flags = 0; + msgs[0].len = len; + msgs[0].buf = data; + break; + case 2: + offset_bytes[1] = (offset >> 8) & 0xff; + /* fall through */ + case 1: + num_msgs = 2; + offset_bytes[0] = offset & 0xff; + + msgs[0].addr = slave_addr; + msgs[0].flags = 0; + msgs[0].len = offset_size; + msgs[0].buf = offset_bytes; + + msgs[1].addr = slave_addr; + msgs[1].flags = I2C_M_NOSTART, + msgs[1].len = len; + msgs[1].buf = data; + break; + default: + return -EINVAL; + } + + i2c->controlling_dd = dd; + ret = i2c_transfer(&i2c->adapter, msgs, num_msgs); + if (ret != num_msgs) { + dd_dev_err(dd, "%s: bus %d, i2c slave 0x%x, offset 0x%x, len 0x%x; write failed, ret %d\n", + __func__, i2c->num, slave_addr, offset, len, ret); + return ret < 0 ? ret : -EIO; + } + return 0; +} + +static int i2c_bus_read(struct hfi1_devdata *dd, struct hfi1_i2c_bus *bus, + u8 slave_addr, int offset, int offset_size, + u8 *data, u16 len) +{ + int ret; + int num_msgs; + u8 offset_bytes[2]; + struct i2c_msg msgs[2]; + + switch (offset_size) { + case 0: + num_msgs = 1; + msgs[0].addr = slave_addr; + msgs[0].flags = I2C_M_RD; + msgs[0].len = len; + msgs[0].buf = data; + break; + case 2: + offset_bytes[1] = (offset >> 8) & 0xff; + /* fall through */ + case 1: + num_msgs = 2; + offset_bytes[0] = offset & 0xff; + + msgs[0].addr = slave_addr; + msgs[0].flags = 0; + msgs[0].len = offset_size; + msgs[0].buf = offset_bytes; + + msgs[1].addr = slave_addr; + msgs[1].flags = I2C_M_RD, + msgs[1].len = len; + msgs[1].buf = data; + break; + default: + return -EINVAL; + } + + bus->controlling_dd = dd; + ret = i2c_transfer(&bus->adapter, msgs, num_msgs); + if (ret != num_msgs) { + dd_dev_err(dd, "%s: bus %d, i2c slave 0x%x, offset 0x%x, len 0x%x; read failed, ret %d\n", + __func__, bus->num, slave_addr, offset, len, ret); + return ret < 0 ? ret : -EIO; + } + return 0; +} + +/* + * Raw i2c write. No set-up or lock checking. + * + * Return 0 on success, -errno on error. + */ +static int __i2c_write(struct hfi1_pportdata *ppd, u32 target, int i2c_addr, + int offset, void *bp, int len) +{ + struct hfi1_devdata *dd = ppd->dd; + struct hfi1_i2c_bus *bus; + u8 slave_addr; + int offset_size; + + bus = target ? dd->asic_data->i2c_bus1 : dd->asic_data->i2c_bus0; + slave_addr = (i2c_addr & 0xff) >> 1; /* convert to 7-bit addr */ + offset_size = (i2c_addr >> 8) & 0x3; + return i2c_bus_write(dd, bus, slave_addr, offset, offset_size, bp, len); +} + +/* + * Caller must hold the i2c chain resource. + * + * Return number of bytes written, or -errno. + */ +int i2c_write(struct hfi1_pportdata *ppd, u32 target, int i2c_addr, int offset, + void *bp, int len) +{ + int ret; + + if (!check_chip_resource(ppd->dd, i2c_target(target), __func__)) + return -EACCES; + + ret = __i2c_write(ppd, target, i2c_addr, offset, bp, len); + if (ret) + return ret; + + return len; +} + +/* + * Raw i2c read. No set-up or lock checking. + * + * Return 0 on success, -errno on error. + */ +static int __i2c_read(struct hfi1_pportdata *ppd, u32 target, int i2c_addr, + int offset, void *bp, int len) +{ + struct hfi1_devdata *dd = ppd->dd; + struct hfi1_i2c_bus *bus; + u8 slave_addr; + int offset_size; + + bus = target ? dd->asic_data->i2c_bus1 : dd->asic_data->i2c_bus0; + slave_addr = (i2c_addr & 0xff) >> 1; /* convert to 7-bit addr */ + offset_size = (i2c_addr >> 8) & 0x3; + return i2c_bus_read(dd, bus, slave_addr, offset, offset_size, bp, len); +} + +/* + * Caller must hold the i2c chain resource. + * + * Return number of bytes read, or -errno. + */ +int i2c_read(struct hfi1_pportdata *ppd, u32 target, int i2c_addr, int offset, + void *bp, int len) +{ + int ret; + + if (!check_chip_resource(ppd->dd, i2c_target(target), __func__)) + return -EACCES; + + ret = __i2c_read(ppd, target, i2c_addr, offset, bp, len); + if (ret) + return ret; + + return len; +} + +/* + * Write page n, offset m of QSFP memory as defined by SFF 8636 + * by writing @addr = ((256 * n) + m) + * + * Caller must hold the i2c chain resource. + * + * Return number of bytes written or -errno. + */ +int qsfp_write(struct hfi1_pportdata *ppd, u32 target, int addr, void *bp, + int len) +{ + int count = 0; + int offset; + int nwrite; + int ret = 0; + u8 page; + + if (!check_chip_resource(ppd->dd, i2c_target(target), __func__)) + return -EACCES; + + while (count < len) { + /* + * Set the qsfp page based on a zero-based address + * and a page size of QSFP_PAGESIZE bytes. + */ + page = (u8)(addr / QSFP_PAGESIZE); + + ret = __i2c_write(ppd, target, QSFP_DEV | QSFP_OFFSET_SIZE, + QSFP_PAGE_SELECT_BYTE_OFFS, &page, 1); + /* QSFPs require a 5-10msec delay after write operations */ + mdelay(5); + if (ret) { + hfi1_dev_porterr(ppd->dd, ppd->port, + "QSFP chain %d can't write QSFP_PAGE_SELECT_BYTE: %d\n", + target, ret); + break; + } + + offset = addr % QSFP_PAGESIZE; + nwrite = len - count; + /* truncate write to boundary if crossing boundary */ + if (((addr % QSFP_RW_BOUNDARY) + nwrite) > QSFP_RW_BOUNDARY) + nwrite = QSFP_RW_BOUNDARY - (addr % QSFP_RW_BOUNDARY); + + ret = __i2c_write(ppd, target, QSFP_DEV | QSFP_OFFSET_SIZE, + offset, bp + count, nwrite); + /* QSFPs require a 5-10msec delay after write operations */ + mdelay(5); + if (ret) /* stop on error */ + break; + + count += nwrite; + addr += nwrite; + } + + if (ret < 0) + return ret; + return count; +} + +/* + * Perform a stand-alone single QSFP write. Acquire the resource, do the + * write, then release the resource. + */ +int one_qsfp_write(struct hfi1_pportdata *ppd, u32 target, int addr, void *bp, + int len) +{ + struct hfi1_devdata *dd = ppd->dd; + u32 resource = qsfp_resource(dd); + int ret; + + ret = acquire_chip_resource(dd, resource, QSFP_WAIT); + if (ret) + return ret; + ret = qsfp_write(ppd, target, addr, bp, len); + release_chip_resource(dd, resource); + + return ret; +} + +/* + * Access page n, offset m of QSFP memory as defined by SFF 8636 + * by reading @addr = ((256 * n) + m) + * + * Caller must hold the i2c chain resource. + * + * Return the number of bytes read or -errno. + */ +int qsfp_read(struct hfi1_pportdata *ppd, u32 target, int addr, void *bp, + int len) +{ + int count = 0; + int offset; + int nread; + int ret = 0; + u8 page; + + if (!check_chip_resource(ppd->dd, i2c_target(target), __func__)) + return -EACCES; + + while (count < len) { + /* + * Set the qsfp page based on a zero-based address + * and a page size of QSFP_PAGESIZE bytes. + */ + page = (u8)(addr / QSFP_PAGESIZE); + ret = __i2c_write(ppd, target, QSFP_DEV | QSFP_OFFSET_SIZE, + QSFP_PAGE_SELECT_BYTE_OFFS, &page, 1); + /* QSFPs require a 5-10msec delay after write operations */ + mdelay(5); + if (ret) { + hfi1_dev_porterr(ppd->dd, ppd->port, + "QSFP chain %d can't write QSFP_PAGE_SELECT_BYTE: %d\n", + target, ret); + break; + } + + offset = addr % QSFP_PAGESIZE; + nread = len - count; + /* truncate read to boundary if crossing boundary */ + if (((addr % QSFP_RW_BOUNDARY) + nread) > QSFP_RW_BOUNDARY) + nread = QSFP_RW_BOUNDARY - (addr % QSFP_RW_BOUNDARY); + + ret = __i2c_read(ppd, target, QSFP_DEV | QSFP_OFFSET_SIZE, + offset, bp + count, nread); + if (ret) /* stop on error */ + break; + + count += nread; + addr += nread; + } + + if (ret < 0) + return ret; + return count; +} + +/* + * Perform a stand-alone single QSFP read. Acquire the resource, do the + * read, then release the resource. + */ +int one_qsfp_read(struct hfi1_pportdata *ppd, u32 target, int addr, void *bp, + int len) +{ + struct hfi1_devdata *dd = ppd->dd; + u32 resource = qsfp_resource(dd); + int ret; + + ret = acquire_chip_resource(dd, resource, QSFP_WAIT); + if (ret) + return ret; + ret = qsfp_read(ppd, target, addr, bp, len); + release_chip_resource(dd, resource); + + return ret; +} + +/* + * This function caches the QSFP memory range in 128 byte chunks. + * As an example, the next byte after address 255 is byte 128 from + * upper page 01H (if existing) rather than byte 0 from lower page 00H. + * Access page n, offset m of QSFP memory as defined by SFF 8636 + * in the cache by reading byte ((128 * n) + m) + * The calls to qsfp_{read,write} in this function correctly handle the + * address map difference between this mapping and the mapping implemented + * by those functions + * + * The caller must be holding the QSFP i2c chain resource. + */ +int refresh_qsfp_cache(struct hfi1_pportdata *ppd, struct qsfp_data *cp) +{ + u32 target = ppd->dd->hfi1_id; + int ret; + unsigned long flags; + u8 *cache = &cp->cache[0]; + + /* ensure sane contents on invalid reads, for cable swaps */ + memset(cache, 0, (QSFP_MAX_NUM_PAGES * 128)); + spin_lock_irqsave(&ppd->qsfp_info.qsfp_lock, flags); + ppd->qsfp_info.cache_valid = 0; + spin_unlock_irqrestore(&ppd->qsfp_info.qsfp_lock, flags); + + if (!qsfp_mod_present(ppd)) { + ret = -ENODEV; + goto bail; + } + + ret = qsfp_read(ppd, target, 0, cache, QSFP_PAGESIZE); + if (ret != QSFP_PAGESIZE) { + dd_dev_info(ppd->dd, + "%s: Page 0 read failed, expected %d, got %d\n", + __func__, QSFP_PAGESIZE, ret); + goto bail; + } + + /* Is paging enabled? */ + if (!(cache[2] & 4)) { + /* Paging enabled, page 03 required */ + if ((cache[195] & 0xC0) == 0xC0) { + /* all */ + ret = qsfp_read(ppd, target, 384, cache + 256, 128); + if (ret <= 0 || ret != 128) { + dd_dev_info(ppd->dd, "%s failed\n", __func__); + goto bail; + } + ret = qsfp_read(ppd, target, 640, cache + 384, 128); + if (ret <= 0 || ret != 128) { + dd_dev_info(ppd->dd, "%s failed\n", __func__); + goto bail; + } + ret = qsfp_read(ppd, target, 896, cache + 512, 128); + if (ret <= 0 || ret != 128) { + dd_dev_info(ppd->dd, "%s failed\n", __func__); + goto bail; + } + } else if ((cache[195] & 0x80) == 0x80) { + /* only page 2 and 3 */ + ret = qsfp_read(ppd, target, 640, cache + 384, 128); + if (ret <= 0 || ret != 128) { + dd_dev_info(ppd->dd, "%s failed\n", __func__); + goto bail; + } + ret = qsfp_read(ppd, target, 896, cache + 512, 128); + if (ret <= 0 || ret != 128) { + dd_dev_info(ppd->dd, "%s failed\n", __func__); + goto bail; + } + } else if ((cache[195] & 0x40) == 0x40) { + /* only page 1 and 3 */ + ret = qsfp_read(ppd, target, 384, cache + 256, 128); + if (ret <= 0 || ret != 128) { + dd_dev_info(ppd->dd, "%s failed\n", __func__); + goto bail; + } + ret = qsfp_read(ppd, target, 896, cache + 512, 128); + if (ret <= 0 || ret != 128) { + dd_dev_info(ppd->dd, "%s failed\n", __func__); + goto bail; + } + } else { + /* only page 3 */ + ret = qsfp_read(ppd, target, 896, cache + 512, 128); + if (ret <= 0 || ret != 128) { + dd_dev_info(ppd->dd, "%s failed\n", __func__); + goto bail; + } + } + } + + spin_lock_irqsave(&ppd->qsfp_info.qsfp_lock, flags); + ppd->qsfp_info.cache_valid = 1; + ppd->qsfp_info.cache_refresh_required = 0; + spin_unlock_irqrestore(&ppd->qsfp_info.qsfp_lock, flags); + + return 0; + +bail: + memset(cache, 0, (QSFP_MAX_NUM_PAGES * 128)); + return ret; +} + +const char * const hfi1_qsfp_devtech[16] = { + "850nm VCSEL", "1310nm VCSEL", "1550nm VCSEL", "1310nm FP", + "1310nm DFB", "1550nm DFB", "1310nm EML", "1550nm EML", + "Cu Misc", "1490nm DFB", "Cu NoEq", "Cu Eq", + "Undef", "Cu Active BothEq", "Cu FarEq", "Cu NearEq" +}; + +#define QSFP_DUMP_CHUNK 16 /* Holds longest string */ +#define QSFP_DEFAULT_HDR_CNT 224 + +#define QSFP_PWR(pbyte) (((pbyte) >> 6) & 3) +#define QSFP_HIGH_PWR(pbyte) ((pbyte) & 3) +/* For use with QSFP_HIGH_PWR macro */ +#define QSFP_HIGH_PWR_UNUSED 0 /* Bits [1:0] = 00 implies low power module */ + +/* + * Takes power class byte [Page 00 Byte 129] in SFF 8636 + * Returns power class as integer (1 through 7, per SFF 8636 rev 2.4) + */ +int get_qsfp_power_class(u8 power_byte) +{ + if (QSFP_HIGH_PWR(power_byte) == QSFP_HIGH_PWR_UNUSED) + /* power classes count from 1, their bit encodings from 0 */ + return (QSFP_PWR(power_byte) + 1); + /* + * 00 in the high power classes stands for unused, bringing + * balance to the off-by-1 offset above, we add 4 here to + * account for the difference between the low and high power + * groups + */ + return (QSFP_HIGH_PWR(power_byte) + 4); +} + +int qsfp_mod_present(struct hfi1_pportdata *ppd) +{ + struct hfi1_devdata *dd = ppd->dd; + u64 reg; + + reg = read_csr(dd, dd->hfi1_id ? ASIC_QSFP2_IN : ASIC_QSFP1_IN); + return !(reg & QSFP_HFI0_MODPRST_N); +} + +/* + * This function maps QSFP memory addresses in 128 byte chunks in the following + * fashion per the CableInfo SMA query definition in the IBA 1.3 spec/OPA Gen 1 + * spec + * For addr 000-127, lower page 00h + * For addr 128-255, upper page 00h + * For addr 256-383, upper page 01h + * For addr 384-511, upper page 02h + * For addr 512-639, upper page 03h + * + * For addresses beyond this range, it returns the invalid range of data buffer + * set to 0. + * For upper pages that are optional, if they are not valid, returns the + * particular range of bytes in the data buffer set to 0. + */ +int get_cable_info(struct hfi1_devdata *dd, u32 port_num, u32 addr, u32 len, + u8 *data) +{ + struct hfi1_pportdata *ppd; + u32 excess_len = len; + int ret = 0, offset = 0; + + if (port_num > dd->num_pports || port_num < 1) { + dd_dev_info(dd, "%s: Invalid port number %d\n", + __func__, port_num); + ret = -EINVAL; + goto set_zeroes; + } + + ppd = dd->pport + (port_num - 1); + if (!qsfp_mod_present(ppd)) { + ret = -ENODEV; + goto set_zeroes; + } + + if (!ppd->qsfp_info.cache_valid) { + ret = -EINVAL; + goto set_zeroes; + } + + if (addr >= (QSFP_MAX_NUM_PAGES * 128)) { + ret = -ERANGE; + goto set_zeroes; + } + + if ((addr + len) > (QSFP_MAX_NUM_PAGES * 128)) { + excess_len = (addr + len) - (QSFP_MAX_NUM_PAGES * 128); + memcpy(data, &ppd->qsfp_info.cache[addr], (len - excess_len)); + data += (len - excess_len); + goto set_zeroes; + } + + memcpy(data, &ppd->qsfp_info.cache[addr], len); + + if (addr <= QSFP_MONITOR_VAL_END && + (addr + len) >= QSFP_MONITOR_VAL_START) { + /* Overlap with the dynamic channel monitor range */ + if (addr < QSFP_MONITOR_VAL_START) { + if (addr + len <= QSFP_MONITOR_VAL_END) + len = addr + len - QSFP_MONITOR_VAL_START; + else + len = QSFP_MONITOR_RANGE; + offset = QSFP_MONITOR_VAL_START - addr; + addr = QSFP_MONITOR_VAL_START; + } else if (addr == QSFP_MONITOR_VAL_START) { + offset = 0; + if (addr + len > QSFP_MONITOR_VAL_END) + len = QSFP_MONITOR_RANGE; + } else { + offset = 0; + if (addr + len > QSFP_MONITOR_VAL_END) + len = QSFP_MONITOR_VAL_END - addr + 1; + } + /* Refresh the values of the dynamic monitors from the cable */ + ret = one_qsfp_read(ppd, dd->hfi1_id, addr, data + offset, len); + if (ret != len) { + ret = -EAGAIN; + goto set_zeroes; + } + } + + return 0; + +set_zeroes: + memset(data, 0, excess_len); + return ret; +} + +static const char *pwr_codes[8] = {"N/AW", + "1.5W", + "2.0W", + "2.5W", + "3.5W", + "4.0W", + "4.5W", + "5.0W" + }; + +int qsfp_dump(struct hfi1_pportdata *ppd, char *buf, int len) +{ + u8 *cache = &ppd->qsfp_info.cache[0]; + u8 bin_buff[QSFP_DUMP_CHUNK]; + char lenstr[6]; + int sofar; + int bidx = 0; + u8 *atten = &cache[QSFP_ATTEN_OFFS]; + u8 *vendor_oui = &cache[QSFP_VOUI_OFFS]; + u8 power_byte = 0; + + sofar = 0; + lenstr[0] = ' '; + lenstr[1] = '\0'; + + if (ppd->qsfp_info.cache_valid) { + if (QSFP_IS_CU(cache[QSFP_MOD_TECH_OFFS])) + snprintf(lenstr, sizeof(lenstr), "%dM ", + cache[QSFP_MOD_LEN_OFFS]); + + power_byte = cache[QSFP_MOD_PWR_OFFS]; + sofar += scnprintf(buf + sofar, len - sofar, "PWR:%.3sW\n", + pwr_codes[get_qsfp_power_class(power_byte)]); + + sofar += scnprintf(buf + sofar, len - sofar, "TECH:%s%s\n", + lenstr, + hfi1_qsfp_devtech[(cache[QSFP_MOD_TECH_OFFS]) >> 4]); + + sofar += scnprintf(buf + sofar, len - sofar, "Vendor:%.*s\n", + QSFP_VEND_LEN, &cache[QSFP_VEND_OFFS]); + + sofar += scnprintf(buf + sofar, len - sofar, "OUI:%06X\n", + QSFP_OUI(vendor_oui)); + + sofar += scnprintf(buf + sofar, len - sofar, "Part#:%.*s\n", + QSFP_PN_LEN, &cache[QSFP_PN_OFFS]); + + sofar += scnprintf(buf + sofar, len - sofar, "Rev:%.*s\n", + QSFP_REV_LEN, &cache[QSFP_REV_OFFS]); + + if (QSFP_IS_CU(cache[QSFP_MOD_TECH_OFFS])) + sofar += scnprintf(buf + sofar, len - sofar, + "Atten:%d, %d\n", + QSFP_ATTEN_SDR(atten), + QSFP_ATTEN_DDR(atten)); + + sofar += scnprintf(buf + sofar, len - sofar, "Serial:%.*s\n", + QSFP_SN_LEN, &cache[QSFP_SN_OFFS]); + + sofar += scnprintf(buf + sofar, len - sofar, "Date:%.*s\n", + QSFP_DATE_LEN, &cache[QSFP_DATE_OFFS]); + + sofar += scnprintf(buf + sofar, len - sofar, "Lot:%.*s\n", + QSFP_LOT_LEN, &cache[QSFP_LOT_OFFS]); + + while (bidx < QSFP_DEFAULT_HDR_CNT) { + int iidx; + + memcpy(bin_buff, &cache[bidx], QSFP_DUMP_CHUNK); + for (iidx = 0; iidx < QSFP_DUMP_CHUNK; ++iidx) { + sofar += scnprintf(buf + sofar, len - sofar, + " %02X", bin_buff[iidx]); + } + sofar += scnprintf(buf + sofar, len - sofar, "\n"); + bidx += QSFP_DUMP_CHUNK; + } + } + return sofar; +} |