diff options
Diffstat (limited to 'drivers/media/usb/gspca/stv06xx/stv06xx_hdcs.h')
| -rw-r--r-- | drivers/media/usb/gspca/stv06xx/stv06xx_hdcs.h | 202 |
1 files changed, 202 insertions, 0 deletions
diff --git a/drivers/media/usb/gspca/stv06xx/stv06xx_hdcs.h b/drivers/media/usb/gspca/stv06xx/stv06xx_hdcs.h new file mode 100644 index 000000000..d2da0de05 --- /dev/null +++ b/drivers/media/usb/gspca/stv06xx/stv06xx_hdcs.h @@ -0,0 +1,202 @@ +/* + * Copyright (c) 2001 Jean-Fredric Clere, Nikolas Zimmermann, Georg Acher + * Mark Cave-Ayland, Carlo E Prelz, Dick Streefland + * Copyright (c) 2002, 2003 Tuukka Toivonen + * Copyright (c) 2008 Erik Andrén + * Copyright (c) 2008 Chia-I Wu + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * P/N 861037: Sensor HDCS1000 ASIC STV0600 + * P/N 861050-0010: Sensor HDCS1000 ASIC STV0600 + * P/N 861050-0020: Sensor Photobit PB100 ASIC STV0600-1 - QuickCam Express + * P/N 861055: Sensor ST VV6410 ASIC STV0610 - LEGO cam + * P/N 861075-0040: Sensor HDCS1000 ASIC + * P/N 961179-0700: Sensor ST VV6410 ASIC STV0602 - Dexxa WebCam USB + * P/N 861040-0000: Sensor ST VV6410 ASIC STV0610 - QuickCam Web + */ + +#ifndef STV06XX_HDCS_H_ +#define STV06XX_HDCS_H_ + +#include "stv06xx_sensor.h" + +#define HDCS_REG_CONFIG(sd) (IS_1020(sd) ? HDCS20_CONFIG : HDCS00_CONFIG) +#define HDCS_REG_CONTROL(sd) (IS_1020(sd) ? HDCS20_CONTROL : HDCS00_CONTROL) + +#define HDCS_1X00_DEF_WIDTH 360 +#define HDCS_1X00_DEF_HEIGHT 296 + +#define HDCS_1020_DEF_WIDTH 352 +#define HDCS_1020_DEF_HEIGHT 292 + +#define HDCS_1020_BOTTOM_Y_SKIP 4 + +#define HDCS_CLK_FREQ_MHZ 25 + +#define HDCS_ADC_START_SIG_DUR 3 + +/* LSB bit of I2C or register address signifies write (0) or read (1) */ +/* I2C Registers common for both HDCS-1000/1100 and HDCS-1020 */ +/* Identifications Register */ +#define HDCS_IDENT (0x00 << 1) +/* Status Register */ +#define HDCS_STATUS (0x01 << 1) +/* Interrupt Mask Register */ +#define HDCS_IMASK (0x02 << 1) +/* Pad Control Register */ +#define HDCS_PCTRL (0x03 << 1) +/* Pad Drive Control Register */ +#define HDCS_PDRV (0x04 << 1) +/* Interface Control Register */ +#define HDCS_ICTRL (0x05 << 1) +/* Interface Timing Register */ +#define HDCS_ITMG (0x06 << 1) +/* Baud Fraction Register */ +#define HDCS_BFRAC (0x07 << 1) +/* Baud Rate Register */ +#define HDCS_BRATE (0x08 << 1) +/* ADC Control Register */ +#define HDCS_ADCCTRL (0x09 << 1) +/* First Window Row Register */ +#define HDCS_FWROW (0x0a << 1) +/* First Window Column Register */ +#define HDCS_FWCOL (0x0b << 1) +/* Last Window Row Register */ +#define HDCS_LWROW (0x0c << 1) +/* Last Window Column Register */ +#define HDCS_LWCOL (0x0d << 1) +/* Timing Control Register */ +#define HDCS_TCTRL (0x0e << 1) +/* PGA Gain Register: Even Row, Even Column */ +#define HDCS_ERECPGA (0x0f << 1) +/* PGA Gain Register: Even Row, Odd Column */ +#define HDCS_EROCPGA (0x10 << 1) +/* PGA Gain Register: Odd Row, Even Column */ +#define HDCS_ORECPGA (0x11 << 1) +/* PGA Gain Register: Odd Row, Odd Column */ +#define HDCS_OROCPGA (0x12 << 1) +/* Row Exposure Low Register */ +#define HDCS_ROWEXPL (0x13 << 1) +/* Row Exposure High Register */ +#define HDCS_ROWEXPH (0x14 << 1) + +/* I2C Registers only for HDCS-1000/1100 */ +/* Sub-Row Exposure Low Register */ +#define HDCS00_SROWEXPL (0x15 << 1) +/* Sub-Row Exposure High Register */ +#define HDCS00_SROWEXPH (0x16 << 1) +/* Configuration Register */ +#define HDCS00_CONFIG (0x17 << 1) +/* Control Register */ +#define HDCS00_CONTROL (0x18 << 1) + +/* I2C Registers only for HDCS-1020 */ +/* Sub-Row Exposure Register */ +#define HDCS20_SROWEXP (0x15 << 1) +/* Error Control Register */ +#define HDCS20_ERROR (0x16 << 1) +/* Interface Timing 2 Register */ +#define HDCS20_ITMG2 (0x17 << 1) +/* Interface Control 2 Register */ +#define HDCS20_ICTRL2 (0x18 << 1) +/* Horizontal Blank Register */ +#define HDCS20_HBLANK (0x19 << 1) +/* Vertical Blank Register */ +#define HDCS20_VBLANK (0x1a << 1) +/* Configuration Register */ +#define HDCS20_CONFIG (0x1b << 1) +/* Control Register */ +#define HDCS20_CONTROL (0x1c << 1) + +#define HDCS_RUN_ENABLE (1 << 2) +#define HDCS_SLEEP_MODE (1 << 1) + +#define HDCS_DEFAULT_EXPOSURE 48 +#define HDCS_DEFAULT_GAIN 50 + +static int hdcs_probe_1x00(struct sd *sd); +static int hdcs_probe_1020(struct sd *sd); +static int hdcs_start(struct sd *sd); +static int hdcs_init(struct sd *sd); +static int hdcs_init_controls(struct sd *sd); +static int hdcs_stop(struct sd *sd); +static int hdcs_dump(struct sd *sd); + +static int hdcs_set_exposure(struct gspca_dev *gspca_dev, __s32 val); +static int hdcs_set_gain(struct gspca_dev *gspca_dev, __s32 val); + +const struct stv06xx_sensor stv06xx_sensor_hdcs1x00 = { + .name = "HP HDCS-1000/1100", + .i2c_flush = 0, + .i2c_addr = (0x55 << 1), + .i2c_len = 1, + + /* FIXME (see if we can lower min_packet_size, needs testing, and also + adjusting framerate when the bandwidth gets lower) */ + .min_packet_size = { 847 }, + .max_packet_size = { 847 }, + + .init = hdcs_init, + .init_controls = hdcs_init_controls, + .probe = hdcs_probe_1x00, + .start = hdcs_start, + .stop = hdcs_stop, + .dump = hdcs_dump, +}; + +const struct stv06xx_sensor stv06xx_sensor_hdcs1020 = { + .name = "HDCS-1020", + .i2c_flush = 0, + .i2c_addr = (0x55 << 1), + .i2c_len = 1, + + /* FIXME (see if we can lower min_packet_size, needs testing, and also + adjusting framerate when the bandwidthm gets lower) */ + .min_packet_size = { 847 }, + .max_packet_size = { 847 }, + + .init = hdcs_init, + .init_controls = hdcs_init_controls, + .probe = hdcs_probe_1020, + .start = hdcs_start, + .stop = hdcs_stop, + .dump = hdcs_dump, +}; + +static const u16 stv_bridge_init[][2] = { + {STV_ISO_ENABLE, 0}, + {STV_REG23, 0}, + {STV_REG00, 0x1d}, + {STV_REG01, 0xb5}, + {STV_REG02, 0xa8}, + {STV_REG03, 0x95}, + {STV_REG04, 0x07}, + + {STV_SCAN_RATE, 0x20}, + {STV_Y_CTRL, 0x01}, + {STV_X_CTRL, 0x0a} +}; + +static const u8 stv_sensor_init[][2] = { + /* Clear status (writing 1 will clear the corresponding status bit) */ + {HDCS_STATUS, BIT(6) | BIT(5) | BIT(4) | BIT(3) | BIT(2) | BIT(1)}, + /* Disable all interrupts */ + {HDCS_IMASK, 0x00}, + {HDCS_PCTRL, BIT(6) | BIT(5) | BIT(1) | BIT(0)}, + {HDCS_PDRV, 0x00}, + {HDCS_ICTRL, BIT(5)}, + {HDCS_ITMG, BIT(4) | BIT(1)}, + /* ADC output resolution to 10 bits */ + {HDCS_ADCCTRL, 10} +}; + +#endif |