diff options
Diffstat (limited to 'drivers/mmc/core/mmc.c')
| -rw-r--r-- | drivers/mmc/core/mmc.c | 2266 |
1 files changed, 2266 insertions, 0 deletions
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c new file mode 100644 index 000000000..745a4b07f --- /dev/null +++ b/drivers/mmc/core/mmc.c @@ -0,0 +1,2266 @@ +/* + * linux/drivers/mmc/core/mmc.c + * + * Copyright (C) 2003-2004 Russell King, All Rights Reserved. + * Copyright (C) 2005-2007 Pierre Ossman, All Rights Reserved. + * MMCv4 support Copyright (C) 2006 Philip Langdale, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/err.h> +#include <linux/of.h> +#include <linux/slab.h> +#include <linux/stat.h> +#include <linux/pm_runtime.h> + +#include <linux/mmc/host.h> +#include <linux/mmc/card.h> +#include <linux/mmc/mmc.h> + +#include "core.h" +#include "card.h" +#include "host.h" +#include "bus.h" +#include "mmc_ops.h" +#include "quirks.h" +#include "sd_ops.h" +#include "pwrseq.h" + +#define DEFAULT_CMD6_TIMEOUT_MS 500 +#define MIN_CACHE_EN_TIMEOUT_MS 1600 + +static const unsigned int tran_exp[] = { + 10000, 100000, 1000000, 10000000, + 0, 0, 0, 0 +}; + +static const unsigned char tran_mant[] = { + 0, 10, 12, 13, 15, 20, 25, 30, + 35, 40, 45, 50, 55, 60, 70, 80, +}; + +static const unsigned int taac_exp[] = { + 1, 10, 100, 1000, 10000, 100000, 1000000, 10000000, +}; + +static const unsigned int taac_mant[] = { + 0, 10, 12, 13, 15, 20, 25, 30, + 35, 40, 45, 50, 55, 60, 70, 80, +}; + +#define UNSTUFF_BITS(resp,start,size) \ + ({ \ + const int __size = size; \ + const u32 __mask = (__size < 32 ? 1 << __size : 0) - 1; \ + const int __off = 3 - ((start) / 32); \ + const int __shft = (start) & 31; \ + u32 __res; \ + \ + __res = resp[__off] >> __shft; \ + if (__size + __shft > 32) \ + __res |= resp[__off-1] << ((32 - __shft) % 32); \ + __res & __mask; \ + }) + +/* + * Given the decoded CSD structure, decode the raw CID to our CID structure. + */ +static int mmc_decode_cid(struct mmc_card *card) +{ + u32 *resp = card->raw_cid; + + /* + * The selection of the format here is based upon published + * specs from sandisk and from what people have reported. + */ + switch (card->csd.mmca_vsn) { + case 0: /* MMC v1.0 - v1.2 */ + case 1: /* MMC v1.4 */ + card->cid.manfid = UNSTUFF_BITS(resp, 104, 24); + card->cid.prod_name[0] = UNSTUFF_BITS(resp, 96, 8); + card->cid.prod_name[1] = UNSTUFF_BITS(resp, 88, 8); + card->cid.prod_name[2] = UNSTUFF_BITS(resp, 80, 8); + card->cid.prod_name[3] = UNSTUFF_BITS(resp, 72, 8); + card->cid.prod_name[4] = UNSTUFF_BITS(resp, 64, 8); + card->cid.prod_name[5] = UNSTUFF_BITS(resp, 56, 8); + card->cid.prod_name[6] = UNSTUFF_BITS(resp, 48, 8); + card->cid.hwrev = UNSTUFF_BITS(resp, 44, 4); + card->cid.fwrev = UNSTUFF_BITS(resp, 40, 4); + card->cid.serial = UNSTUFF_BITS(resp, 16, 24); + card->cid.month = UNSTUFF_BITS(resp, 12, 4); + card->cid.year = UNSTUFF_BITS(resp, 8, 4) + 1997; + break; + + case 2: /* MMC v2.0 - v2.2 */ + case 3: /* MMC v3.1 - v3.3 */ + case 4: /* MMC v4 */ + card->cid.manfid = UNSTUFF_BITS(resp, 120, 8); + card->cid.oemid = UNSTUFF_BITS(resp, 104, 16); + card->cid.prod_name[0] = UNSTUFF_BITS(resp, 96, 8); + card->cid.prod_name[1] = UNSTUFF_BITS(resp, 88, 8); + card->cid.prod_name[2] = UNSTUFF_BITS(resp, 80, 8); + card->cid.prod_name[3] = UNSTUFF_BITS(resp, 72, 8); + card->cid.prod_name[4] = UNSTUFF_BITS(resp, 64, 8); + card->cid.prod_name[5] = UNSTUFF_BITS(resp, 56, 8); + card->cid.prv = UNSTUFF_BITS(resp, 48, 8); + card->cid.serial = UNSTUFF_BITS(resp, 16, 32); + card->cid.month = UNSTUFF_BITS(resp, 12, 4); + card->cid.year = UNSTUFF_BITS(resp, 8, 4) + 1997; + break; + + default: + pr_err("%s: card has unknown MMCA version %d\n", + mmc_hostname(card->host), card->csd.mmca_vsn); + return -EINVAL; + } + + return 0; +} + +static void mmc_set_erase_size(struct mmc_card *card) +{ + if (card->ext_csd.erase_group_def & 1) + card->erase_size = card->ext_csd.hc_erase_size; + else + card->erase_size = card->csd.erase_size; + + mmc_init_erase(card); +} + +/* + * Given a 128-bit response, decode to our card CSD structure. + */ +static int mmc_decode_csd(struct mmc_card *card) +{ + struct mmc_csd *csd = &card->csd; + unsigned int e, m, a, b; + u32 *resp = card->raw_csd; + + /* + * We only understand CSD structure v1.1 and v1.2. + * v1.2 has extra information in bits 15, 11 and 10. + * We also support eMMC v4.4 & v4.41. + */ + csd->structure = UNSTUFF_BITS(resp, 126, 2); + if (csd->structure == 0) { + pr_err("%s: unrecognised CSD structure version %d\n", + mmc_hostname(card->host), csd->structure); + return -EINVAL; + } + + csd->mmca_vsn = UNSTUFF_BITS(resp, 122, 4); + m = UNSTUFF_BITS(resp, 115, 4); + e = UNSTUFF_BITS(resp, 112, 3); + csd->taac_ns = (taac_exp[e] * taac_mant[m] + 9) / 10; + csd->taac_clks = UNSTUFF_BITS(resp, 104, 8) * 100; + + m = UNSTUFF_BITS(resp, 99, 4); + e = UNSTUFF_BITS(resp, 96, 3); + csd->max_dtr = tran_exp[e] * tran_mant[m]; + csd->cmdclass = UNSTUFF_BITS(resp, 84, 12); + + e = UNSTUFF_BITS(resp, 47, 3); + m = UNSTUFF_BITS(resp, 62, 12); + csd->capacity = (1 + m) << (e + 2); + + csd->read_blkbits = UNSTUFF_BITS(resp, 80, 4); + csd->read_partial = UNSTUFF_BITS(resp, 79, 1); + csd->write_misalign = UNSTUFF_BITS(resp, 78, 1); + csd->read_misalign = UNSTUFF_BITS(resp, 77, 1); + csd->dsr_imp = UNSTUFF_BITS(resp, 76, 1); + csd->r2w_factor = UNSTUFF_BITS(resp, 26, 3); + csd->write_blkbits = UNSTUFF_BITS(resp, 22, 4); + csd->write_partial = UNSTUFF_BITS(resp, 21, 1); + + if (csd->write_blkbits >= 9) { + a = UNSTUFF_BITS(resp, 42, 5); + b = UNSTUFF_BITS(resp, 37, 5); + csd->erase_size = (a + 1) * (b + 1); + csd->erase_size <<= csd->write_blkbits - 9; + } + + return 0; +} + +static void mmc_select_card_type(struct mmc_card *card) +{ + struct mmc_host *host = card->host; + u8 card_type = card->ext_csd.raw_card_type; + u32 caps = host->caps, caps2 = host->caps2; + unsigned int hs_max_dtr = 0, hs200_max_dtr = 0; + unsigned int avail_type = 0; + + if (caps & MMC_CAP_MMC_HIGHSPEED && + card_type & EXT_CSD_CARD_TYPE_HS_26) { + hs_max_dtr = MMC_HIGH_26_MAX_DTR; + avail_type |= EXT_CSD_CARD_TYPE_HS_26; + } + + if (caps & MMC_CAP_MMC_HIGHSPEED && + card_type & EXT_CSD_CARD_TYPE_HS_52) { + hs_max_dtr = MMC_HIGH_52_MAX_DTR; + avail_type |= EXT_CSD_CARD_TYPE_HS_52; + } + + if (caps & (MMC_CAP_1_8V_DDR | MMC_CAP_3_3V_DDR) && + card_type & EXT_CSD_CARD_TYPE_DDR_1_8V) { + hs_max_dtr = MMC_HIGH_DDR_MAX_DTR; + avail_type |= EXT_CSD_CARD_TYPE_DDR_1_8V; + } + + if (caps & MMC_CAP_1_2V_DDR && + card_type & EXT_CSD_CARD_TYPE_DDR_1_2V) { + hs_max_dtr = MMC_HIGH_DDR_MAX_DTR; + avail_type |= EXT_CSD_CARD_TYPE_DDR_1_2V; + } + + if (caps2 & MMC_CAP2_HS200_1_8V_SDR && + card_type & EXT_CSD_CARD_TYPE_HS200_1_8V) { + hs200_max_dtr = MMC_HS200_MAX_DTR; + avail_type |= EXT_CSD_CARD_TYPE_HS200_1_8V; + } + + if (caps2 & MMC_CAP2_HS200_1_2V_SDR && + card_type & EXT_CSD_CARD_TYPE_HS200_1_2V) { + hs200_max_dtr = MMC_HS200_MAX_DTR; + avail_type |= EXT_CSD_CARD_TYPE_HS200_1_2V; + } + + if (caps2 & MMC_CAP2_HS400_1_8V && + card_type & EXT_CSD_CARD_TYPE_HS400_1_8V) { + hs200_max_dtr = MMC_HS200_MAX_DTR; + avail_type |= EXT_CSD_CARD_TYPE_HS400_1_8V; + } + + if (caps2 & MMC_CAP2_HS400_1_2V && + card_type & EXT_CSD_CARD_TYPE_HS400_1_2V) { + hs200_max_dtr = MMC_HS200_MAX_DTR; + avail_type |= EXT_CSD_CARD_TYPE_HS400_1_2V; + } + + if ((caps2 & MMC_CAP2_HS400_ES) && + card->ext_csd.strobe_support && + (avail_type & EXT_CSD_CARD_TYPE_HS400)) + avail_type |= EXT_CSD_CARD_TYPE_HS400ES; + + card->ext_csd.hs_max_dtr = hs_max_dtr; + card->ext_csd.hs200_max_dtr = hs200_max_dtr; + card->mmc_avail_type = avail_type; +} + +static void mmc_manage_enhanced_area(struct mmc_card *card, u8 *ext_csd) +{ + u8 hc_erase_grp_sz, hc_wp_grp_sz; + + /* + * Disable these attributes by default + */ + card->ext_csd.enhanced_area_offset = -EINVAL; + card->ext_csd.enhanced_area_size = -EINVAL; + + /* + * Enhanced area feature support -- check whether the eMMC + * card has the Enhanced area enabled. If so, export enhanced + * area offset and size to user by adding sysfs interface. + */ + if ((ext_csd[EXT_CSD_PARTITION_SUPPORT] & 0x2) && + (ext_csd[EXT_CSD_PARTITION_ATTRIBUTE] & 0x1)) { + if (card->ext_csd.partition_setting_completed) { + hc_erase_grp_sz = + ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE]; + hc_wp_grp_sz = + ext_csd[EXT_CSD_HC_WP_GRP_SIZE]; + + /* + * calculate the enhanced data area offset, in bytes + */ + card->ext_csd.enhanced_area_offset = + (((unsigned long long)ext_csd[139]) << 24) + + (((unsigned long long)ext_csd[138]) << 16) + + (((unsigned long long)ext_csd[137]) << 8) + + (((unsigned long long)ext_csd[136])); + if (mmc_card_blockaddr(card)) + card->ext_csd.enhanced_area_offset <<= 9; + /* + * calculate the enhanced data area size, in kilobytes + */ + card->ext_csd.enhanced_area_size = + (ext_csd[142] << 16) + (ext_csd[141] << 8) + + ext_csd[140]; + card->ext_csd.enhanced_area_size *= + (size_t)(hc_erase_grp_sz * hc_wp_grp_sz); + card->ext_csd.enhanced_area_size <<= 9; + } else { + pr_warn("%s: defines enhanced area without partition setting complete\n", + mmc_hostname(card->host)); + } + } +} + +static void mmc_part_add(struct mmc_card *card, u64 size, + unsigned int part_cfg, char *name, int idx, bool ro, + int area_type) +{ + card->part[card->nr_parts].size = size; + card->part[card->nr_parts].part_cfg = part_cfg; + sprintf(card->part[card->nr_parts].name, name, idx); + card->part[card->nr_parts].force_ro = ro; + card->part[card->nr_parts].area_type = area_type; + card->nr_parts++; +} + +static void mmc_manage_gp_partitions(struct mmc_card *card, u8 *ext_csd) +{ + int idx; + u8 hc_erase_grp_sz, hc_wp_grp_sz; + u64 part_size; + + /* + * General purpose partition feature support -- + * If ext_csd has the size of general purpose partitions, + * set size, part_cfg, partition name in mmc_part. + */ + if (ext_csd[EXT_CSD_PARTITION_SUPPORT] & + EXT_CSD_PART_SUPPORT_PART_EN) { + hc_erase_grp_sz = + ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE]; + hc_wp_grp_sz = + ext_csd[EXT_CSD_HC_WP_GRP_SIZE]; + + for (idx = 0; idx < MMC_NUM_GP_PARTITION; idx++) { + if (!ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3] && + !ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3 + 1] && + !ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3 + 2]) + continue; + if (card->ext_csd.partition_setting_completed == 0) { + pr_warn("%s: has partition size defined without partition complete\n", + mmc_hostname(card->host)); + break; + } + part_size = + (ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3 + 2] + << 16) + + (ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3 + 1] + << 8) + + ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3]; + part_size *= (hc_erase_grp_sz * hc_wp_grp_sz); + mmc_part_add(card, part_size << 19, + EXT_CSD_PART_CONFIG_ACC_GP0 + idx, + "gp%d", idx, false, + MMC_BLK_DATA_AREA_GP); + } + } +} + +/* Minimum partition switch timeout in milliseconds */ +#define MMC_MIN_PART_SWITCH_TIME 300 + +/* + * Decode extended CSD. + */ +static int mmc_decode_ext_csd(struct mmc_card *card, u8 *ext_csd) +{ + int err = 0, idx; + u64 part_size; + struct device_node *np; + bool broken_hpi = false; + + /* Version is coded in the CSD_STRUCTURE byte in the EXT_CSD register */ + card->ext_csd.raw_ext_csd_structure = ext_csd[EXT_CSD_STRUCTURE]; + if (card->csd.structure == 3) { + if (card->ext_csd.raw_ext_csd_structure > 2) { + pr_err("%s: unrecognised EXT_CSD structure " + "version %d\n", mmc_hostname(card->host), + card->ext_csd.raw_ext_csd_structure); + err = -EINVAL; + goto out; + } + } + + np = mmc_of_find_child_device(card->host, 0); + if (np && of_device_is_compatible(np, "mmc-card")) + broken_hpi = of_property_read_bool(np, "broken-hpi"); + of_node_put(np); + + /* + * The EXT_CSD format is meant to be forward compatible. As long + * as CSD_STRUCTURE does not change, all values for EXT_CSD_REV + * are authorized, see JEDEC JESD84-B50 section B.8. + */ + card->ext_csd.rev = ext_csd[EXT_CSD_REV]; + + /* fixup device after ext_csd revision field is updated */ + mmc_fixup_device(card, mmc_ext_csd_fixups); + + card->ext_csd.raw_sectors[0] = ext_csd[EXT_CSD_SEC_CNT + 0]; + card->ext_csd.raw_sectors[1] = ext_csd[EXT_CSD_SEC_CNT + 1]; + card->ext_csd.raw_sectors[2] = ext_csd[EXT_CSD_SEC_CNT + 2]; + card->ext_csd.raw_sectors[3] = ext_csd[EXT_CSD_SEC_CNT + 3]; + if (card->ext_csd.rev >= 2) { + card->ext_csd.sectors = + ext_csd[EXT_CSD_SEC_CNT + 0] << 0 | + ext_csd[EXT_CSD_SEC_CNT + 1] << 8 | + ext_csd[EXT_CSD_SEC_CNT + 2] << 16 | + ext_csd[EXT_CSD_SEC_CNT + 3] << 24; + + /* Cards with density > 2GiB are sector addressed */ + if (card->ext_csd.sectors > (2u * 1024 * 1024 * 1024) / 512) + mmc_card_set_blockaddr(card); + } + + card->ext_csd.strobe_support = ext_csd[EXT_CSD_STROBE_SUPPORT]; + card->ext_csd.raw_card_type = ext_csd[EXT_CSD_CARD_TYPE]; + mmc_select_card_type(card); + + card->ext_csd.raw_s_a_timeout = ext_csd[EXT_CSD_S_A_TIMEOUT]; + card->ext_csd.raw_erase_timeout_mult = + ext_csd[EXT_CSD_ERASE_TIMEOUT_MULT]; + card->ext_csd.raw_hc_erase_grp_size = + ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE]; + if (card->ext_csd.rev >= 3) { + u8 sa_shift = ext_csd[EXT_CSD_S_A_TIMEOUT]; + card->ext_csd.part_config = ext_csd[EXT_CSD_PART_CONFIG]; + + /* EXT_CSD value is in units of 10ms, but we store in ms */ + card->ext_csd.part_time = 10 * ext_csd[EXT_CSD_PART_SWITCH_TIME]; + + /* Sleep / awake timeout in 100ns units */ + if (sa_shift > 0 && sa_shift <= 0x17) + card->ext_csd.sa_timeout = + 1 << ext_csd[EXT_CSD_S_A_TIMEOUT]; + card->ext_csd.erase_group_def = + ext_csd[EXT_CSD_ERASE_GROUP_DEF]; + card->ext_csd.hc_erase_timeout = 300 * + ext_csd[EXT_CSD_ERASE_TIMEOUT_MULT]; + card->ext_csd.hc_erase_size = + ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] << 10; + + card->ext_csd.rel_sectors = ext_csd[EXT_CSD_REL_WR_SEC_C]; + + /* + * There are two boot regions of equal size, defined in + * multiples of 128K. + */ + if (ext_csd[EXT_CSD_BOOT_MULT] && mmc_boot_partition_access(card->host)) { + for (idx = 0; idx < MMC_NUM_BOOT_PARTITION; idx++) { + part_size = ext_csd[EXT_CSD_BOOT_MULT] << 17; + mmc_part_add(card, part_size, + EXT_CSD_PART_CONFIG_ACC_BOOT0 + idx, + "boot%d", idx, true, + MMC_BLK_DATA_AREA_BOOT); + } + } + } + + card->ext_csd.raw_hc_erase_gap_size = + ext_csd[EXT_CSD_HC_WP_GRP_SIZE]; + card->ext_csd.raw_sec_trim_mult = + ext_csd[EXT_CSD_SEC_TRIM_MULT]; + card->ext_csd.raw_sec_erase_mult = + ext_csd[EXT_CSD_SEC_ERASE_MULT]; + card->ext_csd.raw_sec_feature_support = + ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT]; + card->ext_csd.raw_trim_mult = + ext_csd[EXT_CSD_TRIM_MULT]; + card->ext_csd.raw_partition_support = ext_csd[EXT_CSD_PARTITION_SUPPORT]; + card->ext_csd.raw_driver_strength = ext_csd[EXT_CSD_DRIVER_STRENGTH]; + if (card->ext_csd.rev >= 4) { + if (ext_csd[EXT_CSD_PARTITION_SETTING_COMPLETED] & + EXT_CSD_PART_SETTING_COMPLETED) + card->ext_csd.partition_setting_completed = 1; + else + card->ext_csd.partition_setting_completed = 0; + + mmc_manage_enhanced_area(card, ext_csd); + + mmc_manage_gp_partitions(card, ext_csd); + + card->ext_csd.sec_trim_mult = + ext_csd[EXT_CSD_SEC_TRIM_MULT]; + card->ext_csd.sec_erase_mult = + ext_csd[EXT_CSD_SEC_ERASE_MULT]; + card->ext_csd.sec_feature_support = + ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT]; + card->ext_csd.trim_timeout = 300 * + ext_csd[EXT_CSD_TRIM_MULT]; + + /* + * Note that the call to mmc_part_add above defaults to read + * only. If this default assumption is changed, the call must + * take into account the value of boot_locked below. + */ + card->ext_csd.boot_ro_lock = ext_csd[EXT_CSD_BOOT_WP]; + card->ext_csd.boot_ro_lockable = true; + + /* Save power class values */ + card->ext_csd.raw_pwr_cl_52_195 = + ext_csd[EXT_CSD_PWR_CL_52_195]; + card->ext_csd.raw_pwr_cl_26_195 = + ext_csd[EXT_CSD_PWR_CL_26_195]; + card->ext_csd.raw_pwr_cl_52_360 = + ext_csd[EXT_CSD_PWR_CL_52_360]; + card->ext_csd.raw_pwr_cl_26_360 = + ext_csd[EXT_CSD_PWR_CL_26_360]; + card->ext_csd.raw_pwr_cl_200_195 = + ext_csd[EXT_CSD_PWR_CL_200_195]; + card->ext_csd.raw_pwr_cl_200_360 = + ext_csd[EXT_CSD_PWR_CL_200_360]; + card->ext_csd.raw_pwr_cl_ddr_52_195 = + ext_csd[EXT_CSD_PWR_CL_DDR_52_195]; + card->ext_csd.raw_pwr_cl_ddr_52_360 = + ext_csd[EXT_CSD_PWR_CL_DDR_52_360]; + card->ext_csd.raw_pwr_cl_ddr_200_360 = + ext_csd[EXT_CSD_PWR_CL_DDR_200_360]; + } + + if (card->ext_csd.rev >= 5) { + /* Adjust production date as per JEDEC JESD84-B451 */ + if (card->cid.year < 2010) + card->cid.year += 16; + + /* check whether the eMMC card supports BKOPS */ + if (ext_csd[EXT_CSD_BKOPS_SUPPORT] & 0x1) { + card->ext_csd.bkops = 1; + card->ext_csd.man_bkops_en = + (ext_csd[EXT_CSD_BKOPS_EN] & + EXT_CSD_MANUAL_BKOPS_MASK); + card->ext_csd.raw_bkops_status = + ext_csd[EXT_CSD_BKOPS_STATUS]; + if (card->ext_csd.man_bkops_en) + pr_debug("%s: MAN_BKOPS_EN bit is set\n", + mmc_hostname(card->host)); + card->ext_csd.auto_bkops_en = + (ext_csd[EXT_CSD_BKOPS_EN] & + EXT_CSD_AUTO_BKOPS_MASK); + if (card->ext_csd.auto_bkops_en) + pr_debug("%s: AUTO_BKOPS_EN bit is set\n", + mmc_hostname(card->host)); + } + + /* check whether the eMMC card supports HPI */ + if (!mmc_card_broken_hpi(card) && + !broken_hpi && (ext_csd[EXT_CSD_HPI_FEATURES] & 0x1)) { + card->ext_csd.hpi = 1; + if (ext_csd[EXT_CSD_HPI_FEATURES] & 0x2) + card->ext_csd.hpi_cmd = MMC_STOP_TRANSMISSION; + else + card->ext_csd.hpi_cmd = MMC_SEND_STATUS; + /* + * Indicate the maximum timeout to close + * a command interrupted by HPI + */ + card->ext_csd.out_of_int_time = + ext_csd[EXT_CSD_OUT_OF_INTERRUPT_TIME] * 10; + } + + card->ext_csd.rel_param = ext_csd[EXT_CSD_WR_REL_PARAM]; + card->ext_csd.rst_n_function = ext_csd[EXT_CSD_RST_N_FUNCTION]; + + /* + * RPMB regions are defined in multiples of 128K. + */ + card->ext_csd.raw_rpmb_size_mult = ext_csd[EXT_CSD_RPMB_MULT]; + if (ext_csd[EXT_CSD_RPMB_MULT] && mmc_host_cmd23(card->host)) { + mmc_part_add(card, ext_csd[EXT_CSD_RPMB_MULT] << 17, + EXT_CSD_PART_CONFIG_ACC_RPMB, + "rpmb", 0, false, + MMC_BLK_DATA_AREA_RPMB); + } + } + + card->ext_csd.raw_erased_mem_count = ext_csd[EXT_CSD_ERASED_MEM_CONT]; + if (ext_csd[EXT_CSD_ERASED_MEM_CONT]) + card->erased_byte = 0xFF; + else + card->erased_byte = 0x0; + + /* eMMC v4.5 or later */ + card->ext_csd.generic_cmd6_time = DEFAULT_CMD6_TIMEOUT_MS; + if (card->ext_csd.rev >= 6) { + card->ext_csd.feature_support |= MMC_DISCARD_FEATURE; + + card->ext_csd.generic_cmd6_time = 10 * + ext_csd[EXT_CSD_GENERIC_CMD6_TIME]; + card->ext_csd.power_off_longtime = 10 * + ext_csd[EXT_CSD_POWER_OFF_LONG_TIME]; + + card->ext_csd.cache_size = + ext_csd[EXT_CSD_CACHE_SIZE + 0] << 0 | + ext_csd[EXT_CSD_CACHE_SIZE + 1] << 8 | + ext_csd[EXT_CSD_CACHE_SIZE + 2] << 16 | + ext_csd[EXT_CSD_CACHE_SIZE + 3] << 24; + + if (ext_csd[EXT_CSD_DATA_SECTOR_SIZE] == 1) + card->ext_csd.data_sector_size = 4096; + else + card->ext_csd.data_sector_size = 512; + + if ((ext_csd[EXT_CSD_DATA_TAG_SUPPORT] & 1) && + (ext_csd[EXT_CSD_TAG_UNIT_SIZE] <= 8)) { + card->ext_csd.data_tag_unit_size = + ((unsigned int) 1 << ext_csd[EXT_CSD_TAG_UNIT_SIZE]) * + (card->ext_csd.data_sector_size); + } else { + card->ext_csd.data_tag_unit_size = 0; + } + + card->ext_csd.max_packed_writes = + ext_csd[EXT_CSD_MAX_PACKED_WRITES]; + card->ext_csd.max_packed_reads = + ext_csd[EXT_CSD_MAX_PACKED_READS]; + } else { + card->ext_csd.data_sector_size = 512; + } + + /* + * GENERIC_CMD6_TIME is to be used "unless a specific timeout is defined + * when accessing a specific field", so use it here if there is no + * PARTITION_SWITCH_TIME. + */ + if (!card->ext_csd.part_time) + card->ext_csd.part_time = card->ext_csd.generic_cmd6_time; + /* Some eMMC set the value too low so set a minimum */ + if (card->ext_csd.part_time < MMC_MIN_PART_SWITCH_TIME) + card->ext_csd.part_time = MMC_MIN_PART_SWITCH_TIME; + + /* eMMC v5 or later */ + if (card->ext_csd.rev >= 7) { + memcpy(card->ext_csd.fwrev, &ext_csd[EXT_CSD_FIRMWARE_VERSION], + MMC_FIRMWARE_LEN); + card->ext_csd.ffu_capable = + (ext_csd[EXT_CSD_SUPPORTED_MODE] & 0x1) && + !(ext_csd[EXT_CSD_FW_CONFIG] & 0x1); + + card->ext_csd.pre_eol_info = ext_csd[EXT_CSD_PRE_EOL_INFO]; + card->ext_csd.device_life_time_est_typ_a = + ext_csd[EXT_CSD_DEVICE_LIFE_TIME_EST_TYP_A]; + card->ext_csd.device_life_time_est_typ_b = + ext_csd[EXT_CSD_DEVICE_LIFE_TIME_EST_TYP_B]; + } + + /* eMMC v5.1 or later */ + if (card->ext_csd.rev >= 8) { + card->ext_csd.cmdq_support = ext_csd[EXT_CSD_CMDQ_SUPPORT] & + EXT_CSD_CMDQ_SUPPORTED; + card->ext_csd.cmdq_depth = (ext_csd[EXT_CSD_CMDQ_DEPTH] & + EXT_CSD_CMDQ_DEPTH_MASK) + 1; + /* Exclude inefficiently small queue depths */ + if (card->ext_csd.cmdq_depth <= 2) { + card->ext_csd.cmdq_support = false; + card->ext_csd.cmdq_depth = 0; + } + if (card->ext_csd.cmdq_support) { + pr_debug("%s: Command Queue supported depth %u\n", + mmc_hostname(card->host), + card->ext_csd.cmdq_depth); + } + } +out: + return err; +} + +static int mmc_read_ext_csd(struct mmc_card *card) +{ + u8 *ext_csd; + int err; + + if (!mmc_can_ext_csd(card)) + return 0; + + err = mmc_get_ext_csd(card, &ext_csd); + if (err) { + /* If the host or the card can't do the switch, + * fail more gracefully. */ + if ((err != -EINVAL) + && (err != -ENOSYS) + && (err != -EFAULT)) + return err; + + /* + * High capacity cards should have this "magic" size + * stored in their CSD. + */ + if (card->csd.capacity == (4096 * 512)) { + pr_err("%s: unable to read EXT_CSD on a possible high capacity card. Card will be ignored.\n", + mmc_hostname(card->host)); + } else { + pr_warn("%s: unable to read EXT_CSD, performance might suffer\n", + mmc_hostname(card->host)); + err = 0; + } + + return err; + } + + err = mmc_decode_ext_csd(card, ext_csd); + kfree(ext_csd); + return err; +} + +static int mmc_compare_ext_csds(struct mmc_card *card, unsigned bus_width) +{ + u8 *bw_ext_csd; + int err; + + if (bus_width == MMC_BUS_WIDTH_1) + return 0; + + err = mmc_get_ext_csd(card, &bw_ext_csd); + if (err) + return err; + + /* only compare read only fields */ + err = !((card->ext_csd.raw_partition_support == + bw_ext_csd[EXT_CSD_PARTITION_SUPPORT]) && + (card->ext_csd.raw_erased_mem_count == + bw_ext_csd[EXT_CSD_ERASED_MEM_CONT]) && + (card->ext_csd.rev == + bw_ext_csd[EXT_CSD_REV]) && + (card->ext_csd.raw_ext_csd_structure == + bw_ext_csd[EXT_CSD_STRUCTURE]) && + (card->ext_csd.raw_card_type == + bw_ext_csd[EXT_CSD_CARD_TYPE]) && + (card->ext_csd.raw_s_a_timeout == + bw_ext_csd[EXT_CSD_S_A_TIMEOUT]) && + (card->ext_csd.raw_hc_erase_gap_size == + bw_ext_csd[EXT_CSD_HC_WP_GRP_SIZE]) && + (card->ext_csd.raw_erase_timeout_mult == + bw_ext_csd[EXT_CSD_ERASE_TIMEOUT_MULT]) && + (card->ext_csd.raw_hc_erase_grp_size == + bw_ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE]) && + (card->ext_csd.raw_sec_trim_mult == + bw_ext_csd[EXT_CSD_SEC_TRIM_MULT]) && + (card->ext_csd.raw_sec_erase_mult == + bw_ext_csd[EXT_CSD_SEC_ERASE_MULT]) && + (card->ext_csd.raw_sec_feature_support == + bw_ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT]) && + (card->ext_csd.raw_trim_mult == + bw_ext_csd[EXT_CSD_TRIM_MULT]) && + (card->ext_csd.raw_sectors[0] == + bw_ext_csd[EXT_CSD_SEC_CNT + 0]) && + (card->ext_csd.raw_sectors[1] == + bw_ext_csd[EXT_CSD_SEC_CNT + 1]) && + (card->ext_csd.raw_sectors[2] == + bw_ext_csd[EXT_CSD_SEC_CNT + 2]) && + (card->ext_csd.raw_sectors[3] == + bw_ext_csd[EXT_CSD_SEC_CNT + 3]) && + (card->ext_csd.raw_pwr_cl_52_195 == + bw_ext_csd[EXT_CSD_PWR_CL_52_195]) && + (card->ext_csd.raw_pwr_cl_26_195 == + bw_ext_csd[EXT_CSD_PWR_CL_26_195]) && + (card->ext_csd.raw_pwr_cl_52_360 == + bw_ext_csd[EXT_CSD_PWR_CL_52_360]) && + (card->ext_csd.raw_pwr_cl_26_360 == + bw_ext_csd[EXT_CSD_PWR_CL_26_360]) && + (card->ext_csd.raw_pwr_cl_200_195 == + bw_ext_csd[EXT_CSD_PWR_CL_200_195]) && + (card->ext_csd.raw_pwr_cl_200_360 == + bw_ext_csd[EXT_CSD_PWR_CL_200_360]) && + (card->ext_csd.raw_pwr_cl_ddr_52_195 == + bw_ext_csd[EXT_CSD_PWR_CL_DDR_52_195]) && + (card->ext_csd.raw_pwr_cl_ddr_52_360 == + bw_ext_csd[EXT_CSD_PWR_CL_DDR_52_360]) && + (card->ext_csd.raw_pwr_cl_ddr_200_360 == + bw_ext_csd[EXT_CSD_PWR_CL_DDR_200_360])); + + if (err) + err = -EINVAL; + + kfree(bw_ext_csd); + return err; +} + +MMC_DEV_ATTR(cid, "%08x%08x%08x%08x\n", card->raw_cid[0], card->raw_cid[1], + card->raw_cid[2], card->raw_cid[3]); +MMC_DEV_ATTR(csd, "%08x%08x%08x%08x\n", card->raw_csd[0], card->raw_csd[1], + card->raw_csd[2], card->raw_csd[3]); +MMC_DEV_ATTR(date, "%02d/%04d\n", card->cid.month, card->cid.year); +MMC_DEV_ATTR(erase_size, "%u\n", card->erase_size << 9); +MMC_DEV_ATTR(preferred_erase_size, "%u\n", card->pref_erase << 9); +MMC_DEV_ATTR(ffu_capable, "%d\n", card->ext_csd.ffu_capable); +MMC_DEV_ATTR(hwrev, "0x%x\n", card->cid.hwrev); +MMC_DEV_ATTR(manfid, "0x%06x\n", card->cid.manfid); +MMC_DEV_ATTR(name, "%s\n", card->cid.prod_name); +MMC_DEV_ATTR(oemid, "0x%04x\n", card->cid.oemid); +MMC_DEV_ATTR(prv, "0x%x\n", card->cid.prv); +MMC_DEV_ATTR(rev, "0x%x\n", card->ext_csd.rev); +MMC_DEV_ATTR(pre_eol_info, "0x%02x\n", card->ext_csd.pre_eol_info); +MMC_DEV_ATTR(life_time, "0x%02x 0x%02x\n", + card->ext_csd.device_life_time_est_typ_a, + card->ext_csd.device_life_time_est_typ_b); +MMC_DEV_ATTR(serial, "0x%08x\n", card->cid.serial); +MMC_DEV_ATTR(enhanced_area_offset, "%llu\n", + card->ext_csd.enhanced_area_offset); +MMC_DEV_ATTR(enhanced_area_size, "%u\n", card->ext_csd.enhanced_area_size); +MMC_DEV_ATTR(raw_rpmb_size_mult, "%#x\n", card->ext_csd.raw_rpmb_size_mult); +MMC_DEV_ATTR(rel_sectors, "%#x\n", card->ext_csd.rel_sectors); +MMC_DEV_ATTR(ocr, "0x%08x\n", card->ocr); +MMC_DEV_ATTR(rca, "0x%04x\n", card->rca); +MMC_DEV_ATTR(cmdq_en, "%d\n", card->ext_csd.cmdq_en); + +static ssize_t mmc_fwrev_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct mmc_card *card = mmc_dev_to_card(dev); + + if (card->ext_csd.rev < 7) { + return sprintf(buf, "0x%x\n", card->cid.fwrev); + } else { + return sprintf(buf, "0x%*phN\n", MMC_FIRMWARE_LEN, + card->ext_csd.fwrev); + } +} + +static DEVICE_ATTR(fwrev, S_IRUGO, mmc_fwrev_show, NULL); + +static ssize_t mmc_dsr_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct mmc_card *card = mmc_dev_to_card(dev); + struct mmc_host *host = card->host; + + if (card->csd.dsr_imp && host->dsr_req) + return sprintf(buf, "0x%x\n", host->dsr); + else + /* return default DSR value */ + return sprintf(buf, "0x%x\n", 0x404); +} + +static DEVICE_ATTR(dsr, S_IRUGO, mmc_dsr_show, NULL); + +static struct attribute *mmc_std_attrs[] = { + &dev_attr_cid.attr, + &dev_attr_csd.attr, + &dev_attr_date.attr, + &dev_attr_erase_size.attr, + &dev_attr_preferred_erase_size.attr, + &dev_attr_fwrev.attr, + &dev_attr_ffu_capable.attr, + &dev_attr_hwrev.attr, + &dev_attr_manfid.attr, + &dev_attr_name.attr, + &dev_attr_oemid.attr, + &dev_attr_prv.attr, + &dev_attr_rev.attr, + &dev_attr_pre_eol_info.attr, + &dev_attr_life_time.attr, + &dev_attr_serial.attr, + &dev_attr_enhanced_area_offset.attr, + &dev_attr_enhanced_area_size.attr, + &dev_attr_raw_rpmb_size_mult.attr, + &dev_attr_rel_sectors.attr, + &dev_attr_ocr.attr, + &dev_attr_rca.attr, + &dev_attr_dsr.attr, + &dev_attr_cmdq_en.attr, + NULL, +}; +ATTRIBUTE_GROUPS(mmc_std); + +static struct device_type mmc_type = { + .groups = mmc_std_groups, +}; + +/* + * Select the PowerClass for the current bus width + * If power class is defined for 4/8 bit bus in the + * extended CSD register, select it by executing the + * mmc_switch command. + */ +static int __mmc_select_powerclass(struct mmc_card *card, + unsigned int bus_width) +{ + struct mmc_host *host = card->host; + struct mmc_ext_csd *ext_csd = &card->ext_csd; + unsigned int pwrclass_val = 0; + int err = 0; + + switch (1 << host->ios.vdd) { + case MMC_VDD_165_195: + if (host->ios.clock <= MMC_HIGH_26_MAX_DTR) + pwrclass_val = ext_csd->raw_pwr_cl_26_195; + else if (host->ios.clock <= MMC_HIGH_52_MAX_DTR) + pwrclass_val = (bus_width <= EXT_CSD_BUS_WIDTH_8) ? + ext_csd->raw_pwr_cl_52_195 : + ext_csd->raw_pwr_cl_ddr_52_195; + else if (host->ios.clock <= MMC_HS200_MAX_DTR) + pwrclass_val = ext_csd->raw_pwr_cl_200_195; + break; + case MMC_VDD_27_28: + case MMC_VDD_28_29: + case MMC_VDD_29_30: + case MMC_VDD_30_31: + case MMC_VDD_31_32: + case MMC_VDD_32_33: + case MMC_VDD_33_34: + case MMC_VDD_34_35: + case MMC_VDD_35_36: + if (host->ios.clock <= MMC_HIGH_26_MAX_DTR) + pwrclass_val = ext_csd->raw_pwr_cl_26_360; + else if (host->ios.clock <= MMC_HIGH_52_MAX_DTR) + pwrclass_val = (bus_width <= EXT_CSD_BUS_WIDTH_8) ? + ext_csd->raw_pwr_cl_52_360 : + ext_csd->raw_pwr_cl_ddr_52_360; + else if (host->ios.clock <= MMC_HS200_MAX_DTR) + pwrclass_val = (bus_width == EXT_CSD_DDR_BUS_WIDTH_8) ? + ext_csd->raw_pwr_cl_ddr_200_360 : + ext_csd->raw_pwr_cl_200_360; + break; + default: + pr_warn("%s: Voltage range not supported for power class\n", + mmc_hostname(host)); + return -EINVAL; + } + + if (bus_width & (EXT_CSD_BUS_WIDTH_8 | EXT_CSD_DDR_BUS_WIDTH_8)) + pwrclass_val = (pwrclass_val & EXT_CSD_PWR_CL_8BIT_MASK) >> + EXT_CSD_PWR_CL_8BIT_SHIFT; + else + pwrclass_val = (pwrclass_val & EXT_CSD_PWR_CL_4BIT_MASK) >> + EXT_CSD_PWR_CL_4BIT_SHIFT; + + /* If the power class is different from the default value */ + if (pwrclass_val > 0) { + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_POWER_CLASS, + pwrclass_val, + card->ext_csd.generic_cmd6_time); + } + + return err; +} + +static int mmc_select_powerclass(struct mmc_card *card) +{ + struct mmc_host *host = card->host; + u32 bus_width, ext_csd_bits; + int err, ddr; + + /* Power class selection is supported for versions >= 4.0 */ + if (!mmc_can_ext_csd(card)) + return 0; + + bus_width = host->ios.bus_width; + /* Power class values are defined only for 4/8 bit bus */ + if (bus_width == MMC_BUS_WIDTH_1) + return 0; + + ddr = card->mmc_avail_type & EXT_CSD_CARD_TYPE_DDR_52; + if (ddr) + ext_csd_bits = (bus_width == MMC_BUS_WIDTH_8) ? + EXT_CSD_DDR_BUS_WIDTH_8 : EXT_CSD_DDR_BUS_WIDTH_4; + else + ext_csd_bits = (bus_width == MMC_BUS_WIDTH_8) ? + EXT_CSD_BUS_WIDTH_8 : EXT_CSD_BUS_WIDTH_4; + + err = __mmc_select_powerclass(card, ext_csd_bits); + if (err) + pr_warn("%s: power class selection to bus width %d ddr %d failed\n", + mmc_hostname(host), 1 << bus_width, ddr); + + return err; +} + +/* + * Set the bus speed for the selected speed mode. + */ +static void mmc_set_bus_speed(struct mmc_card *card) +{ + unsigned int max_dtr = (unsigned int)-1; + + if ((mmc_card_hs200(card) || mmc_card_hs400(card)) && + max_dtr > card->ext_csd.hs200_max_dtr) + max_dtr = card->ext_csd.hs200_max_dtr; + else if (mmc_card_hs(card) && max_dtr > card->ext_csd.hs_max_dtr) + max_dtr = card->ext_csd.hs_max_dtr; + else if (max_dtr > card->csd.max_dtr) + max_dtr = card->csd.max_dtr; + + mmc_set_clock(card->host, max_dtr); +} + +/* + * Select the bus width amoung 4-bit and 8-bit(SDR). + * If the bus width is changed successfully, return the selected width value. + * Zero is returned instead of error value if the wide width is not supported. + */ +static int mmc_select_bus_width(struct mmc_card *card) +{ + static unsigned ext_csd_bits[] = { + EXT_CSD_BUS_WIDTH_8, + EXT_CSD_BUS_WIDTH_4, + }; + static unsigned bus_widths[] = { + MMC_BUS_WIDTH_8, + MMC_BUS_WIDTH_4, + }; + struct mmc_host *host = card->host; + unsigned idx, bus_width = 0; + int err = 0; + + if (!mmc_can_ext_csd(card) || + !(host->caps & (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA))) + return 0; + + idx = (host->caps & MMC_CAP_8_BIT_DATA) ? 0 : 1; + + /* + * Unlike SD, MMC cards dont have a configuration register to notify + * supported bus width. So bus test command should be run to identify + * the supported bus width or compare the ext csd values of current + * bus width and ext csd values of 1 bit mode read earlier. + */ + for (; idx < ARRAY_SIZE(bus_widths); idx++) { + /* + * Host is capable of 8bit transfer, then switch + * the device to work in 8bit transfer mode. If the + * mmc switch command returns error then switch to + * 4bit transfer mode. On success set the corresponding + * bus width on the host. + */ + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_BUS_WIDTH, + ext_csd_bits[idx], + card->ext_csd.generic_cmd6_time); + if (err) + continue; + + bus_width = bus_widths[idx]; + mmc_set_bus_width(host, bus_width); + + /* + * If controller can't handle bus width test, + * compare ext_csd previously read in 1 bit mode + * against ext_csd at new bus width + */ + if (!(host->caps & MMC_CAP_BUS_WIDTH_TEST)) + err = mmc_compare_ext_csds(card, bus_width); + else + err = mmc_bus_test(card, bus_width); + + if (!err) { + err = bus_width; + break; + } else { + pr_warn("%s: switch to bus width %d failed\n", + mmc_hostname(host), 1 << bus_width); + } + } + + return err; +} + +/* + * Switch to the high-speed mode + */ +static int mmc_select_hs(struct mmc_card *card) +{ + int err; + + err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_HS_TIMING, EXT_CSD_TIMING_HS, + card->ext_csd.generic_cmd6_time, MMC_TIMING_MMC_HS, + true, true, true); + if (err) + pr_warn("%s: switch to high-speed failed, err:%d\n", + mmc_hostname(card->host), err); + + return err; +} + +/* + * Activate wide bus and DDR if supported. + */ +static int mmc_select_hs_ddr(struct mmc_card *card) +{ + struct mmc_host *host = card->host; + u32 bus_width, ext_csd_bits; + int err = 0; + + if (!(card->mmc_avail_type & EXT_CSD_CARD_TYPE_DDR_52)) + return 0; + + bus_width = host->ios.bus_width; + if (bus_width == MMC_BUS_WIDTH_1) + return 0; + + ext_csd_bits = (bus_width == MMC_BUS_WIDTH_8) ? + EXT_CSD_DDR_BUS_WIDTH_8 : EXT_CSD_DDR_BUS_WIDTH_4; + + err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_BUS_WIDTH, + ext_csd_bits, + card->ext_csd.generic_cmd6_time, + MMC_TIMING_MMC_DDR52, + true, true, true); + if (err) { + pr_err("%s: switch to bus width %d ddr failed\n", + mmc_hostname(host), 1 << bus_width); + return err; + } + + /* + * eMMC cards can support 3.3V to 1.2V i/o (vccq) + * signaling. + * + * EXT_CSD_CARD_TYPE_DDR_1_8V means 3.3V or 1.8V vccq. + * + * 1.8V vccq at 3.3V core voltage (vcc) is not required + * in the JEDEC spec for DDR. + * + * Even (e)MMC card can support 3.3v to 1.2v vccq, but not all + * host controller can support this, like some of the SDHCI + * controller which connect to an eMMC device. Some of these + * host controller still needs to use 1.8v vccq for supporting + * DDR mode. + * + * So the sequence will be: + * if (host and device can both support 1.2v IO) + * use 1.2v IO; + * else if (host and device can both support 1.8v IO) + * use 1.8v IO; + * so if host and device can only support 3.3v IO, this is the + * last choice. + * + * WARNING: eMMC rules are NOT the same as SD DDR + */ + if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_DDR_1_2V) { + err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120); + if (!err) + return 0; + } + + if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_DDR_1_8V && + host->caps & MMC_CAP_1_8V_DDR) + err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180); + + /* make sure vccq is 3.3v after switching disaster */ + if (err) + err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330); + + return err; +} + +static int mmc_select_hs400(struct mmc_card *card) +{ + struct mmc_host *host = card->host; + unsigned int max_dtr; + int err = 0; + u8 val; + + /* + * HS400 mode requires 8-bit bus width + */ + if (!(card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS400 && + host->ios.bus_width == MMC_BUS_WIDTH_8)) + return 0; + + /* Switch card to HS mode */ + val = EXT_CSD_TIMING_HS; + err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_HS_TIMING, val, + card->ext_csd.generic_cmd6_time, 0, + true, false, true); + if (err) { + pr_err("%s: switch to high-speed from hs200 failed, err:%d\n", + mmc_hostname(host), err); + return err; + } + + /* Set host controller to HS timing */ + mmc_set_timing(card->host, MMC_TIMING_MMC_HS); + + /* Prepare host to downgrade to HS timing */ + if (host->ops->hs400_downgrade) + host->ops->hs400_downgrade(host); + + /* Reduce frequency to HS frequency */ + max_dtr = card->ext_csd.hs_max_dtr; + mmc_set_clock(host, max_dtr); + + err = mmc_switch_status(card); + if (err) + goto out_err; + + /* Switch card to DDR */ + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_BUS_WIDTH, + EXT_CSD_DDR_BUS_WIDTH_8, + card->ext_csd.generic_cmd6_time); + if (err) { + pr_err("%s: switch to bus width for hs400 failed, err:%d\n", + mmc_hostname(host), err); + return err; + } + + /* Switch card to HS400 */ + val = EXT_CSD_TIMING_HS400 | + card->drive_strength << EXT_CSD_DRV_STR_SHIFT; + err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_HS_TIMING, val, + card->ext_csd.generic_cmd6_time, 0, + true, false, true); + if (err) { + pr_err("%s: switch to hs400 failed, err:%d\n", + mmc_hostname(host), err); + return err; + } + + /* Set host controller to HS400 timing and frequency */ + mmc_set_timing(host, MMC_TIMING_MMC_HS400); + mmc_set_bus_speed(card); + + if (host->ops->hs400_complete) + host->ops->hs400_complete(host); + + err = mmc_switch_status(card); + if (err) + goto out_err; + + return 0; + +out_err: + pr_err("%s: %s failed, error %d\n", mmc_hostname(card->host), + __func__, err); + return err; +} + +int mmc_hs200_to_hs400(struct mmc_card *card) +{ + return mmc_select_hs400(card); +} + +int mmc_hs400_to_hs200(struct mmc_card *card) +{ + struct mmc_host *host = card->host; + unsigned int max_dtr; + int err; + u8 val; + + /* Reduce frequency to HS */ + max_dtr = card->ext_csd.hs_max_dtr; + mmc_set_clock(host, max_dtr); + + /* Switch HS400 to HS DDR */ + val = EXT_CSD_TIMING_HS; + err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_HS_TIMING, + val, card->ext_csd.generic_cmd6_time, 0, + true, false, true); + if (err) + goto out_err; + + mmc_set_timing(host, MMC_TIMING_MMC_DDR52); + + err = mmc_switch_status(card); + if (err) + goto out_err; + + /* Switch HS DDR to HS */ + err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BUS_WIDTH, + EXT_CSD_BUS_WIDTH_8, card->ext_csd.generic_cmd6_time, + 0, true, false, true); + if (err) + goto out_err; + + mmc_set_timing(host, MMC_TIMING_MMC_HS); + + if (host->ops->hs400_downgrade) + host->ops->hs400_downgrade(host); + + err = mmc_switch_status(card); + if (err) + goto out_err; + + /* Switch HS to HS200 */ + val = EXT_CSD_TIMING_HS200 | + card->drive_strength << EXT_CSD_DRV_STR_SHIFT; + err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_HS_TIMING, + val, card->ext_csd.generic_cmd6_time, 0, + true, false, true); + if (err) + goto out_err; + + mmc_set_timing(host, MMC_TIMING_MMC_HS200); + + /* + * For HS200, CRC errors are not a reliable way to know the switch + * failed. If there really is a problem, we would expect tuning will + * fail and the result ends up the same. + */ + err = __mmc_switch_status(card, false); + if (err) + goto out_err; + + mmc_set_bus_speed(card); + + /* Prepare tuning for HS400 mode. */ + if (host->ops->prepare_hs400_tuning) + host->ops->prepare_hs400_tuning(host, &host->ios); + + return 0; + +out_err: + pr_err("%s: %s failed, error %d\n", mmc_hostname(card->host), + __func__, err); + return err; +} + +static void mmc_select_driver_type(struct mmc_card *card) +{ + int card_drv_type, drive_strength, drv_type = 0; + int fixed_drv_type = card->host->fixed_drv_type; + + card_drv_type = card->ext_csd.raw_driver_strength | + mmc_driver_type_mask(0); + + if (fixed_drv_type >= 0) + drive_strength = card_drv_type & mmc_driver_type_mask(fixed_drv_type) + ? fixed_drv_type : 0; + else + drive_strength = mmc_select_drive_strength(card, + card->ext_csd.hs200_max_dtr, + card_drv_type, &drv_type); + + card->drive_strength = drive_strength; + + if (drv_type) + mmc_set_driver_type(card->host, drv_type); +} + +static int mmc_select_hs400es(struct mmc_card *card) +{ + struct mmc_host *host = card->host; + int err = -EINVAL; + u8 val; + + if (!(host->caps & MMC_CAP_8_BIT_DATA)) { + err = -ENOTSUPP; + goto out_err; + } + + if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS400_1_2V) + err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120); + + if (err && card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS400_1_8V) + err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180); + + /* If fails try again during next card power cycle */ + if (err) + goto out_err; + + err = mmc_select_bus_width(card); + if (err != MMC_BUS_WIDTH_8) { + pr_err("%s: switch to 8bit bus width failed, err:%d\n", + mmc_hostname(host), err); + err = err < 0 ? err : -ENOTSUPP; + goto out_err; + } + + /* Switch card to HS mode */ + err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_HS_TIMING, EXT_CSD_TIMING_HS, + card->ext_csd.generic_cmd6_time, 0, + true, false, true); + if (err) { + pr_err("%s: switch to hs for hs400es failed, err:%d\n", + mmc_hostname(host), err); + goto out_err; + } + + mmc_set_timing(host, MMC_TIMING_MMC_HS); + err = mmc_switch_status(card); + if (err) + goto out_err; + + mmc_set_clock(host, card->ext_csd.hs_max_dtr); + + /* Switch card to DDR with strobe bit */ + val = EXT_CSD_DDR_BUS_WIDTH_8 | EXT_CSD_BUS_WIDTH_STROBE; + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_BUS_WIDTH, + val, + card->ext_csd.generic_cmd6_time); + if (err) { + pr_err("%s: switch to bus width for hs400es failed, err:%d\n", + mmc_hostname(host), err); + goto out_err; + } + + mmc_select_driver_type(card); + + /* Switch card to HS400 */ + val = EXT_CSD_TIMING_HS400 | + card->drive_strength << EXT_CSD_DRV_STR_SHIFT; + err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_HS_TIMING, val, + card->ext_csd.generic_cmd6_time, 0, + true, false, true); + if (err) { + pr_err("%s: switch to hs400es failed, err:%d\n", + mmc_hostname(host), err); + goto out_err; + } + + /* Set host controller to HS400 timing and frequency */ + mmc_set_timing(host, MMC_TIMING_MMC_HS400); + + /* Controller enable enhanced strobe function */ + host->ios.enhanced_strobe = true; + if (host->ops->hs400_enhanced_strobe) + host->ops->hs400_enhanced_strobe(host, &host->ios); + + err = mmc_switch_status(card); + if (err) + goto out_err; + + return 0; + +out_err: + pr_err("%s: %s failed, error %d\n", mmc_hostname(card->host), + __func__, err); + return err; +} + +/* + * For device supporting HS200 mode, the following sequence + * should be done before executing the tuning process. + * 1. set the desired bus width(4-bit or 8-bit, 1-bit is not supported) + * 2. switch to HS200 mode + * 3. set the clock to > 52Mhz and <=200MHz + */ +static int mmc_select_hs200(struct mmc_card *card) +{ + struct mmc_host *host = card->host; + unsigned int old_timing, old_signal_voltage; + int err = -EINVAL; + u8 val; + + old_signal_voltage = host->ios.signal_voltage; + if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200_1_2V) + err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120); + + if (err && card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200_1_8V) + err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180); + + /* If fails try again during next card power cycle */ + if (err) + return err; + + mmc_select_driver_type(card); + + /* + * Set the bus width(4 or 8) with host's support and + * switch to HS200 mode if bus width is set successfully. + */ + err = mmc_select_bus_width(card); + if (err > 0) { + val = EXT_CSD_TIMING_HS200 | + card->drive_strength << EXT_CSD_DRV_STR_SHIFT; + err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_HS_TIMING, val, + card->ext_csd.generic_cmd6_time, 0, + true, false, true); + if (err) + goto err; + old_timing = host->ios.timing; + mmc_set_timing(host, MMC_TIMING_MMC_HS200); + + /* + * For HS200, CRC errors are not a reliable way to know the + * switch failed. If there really is a problem, we would expect + * tuning will fail and the result ends up the same. + */ + err = __mmc_switch_status(card, false); + + /* + * mmc_select_timing() assumes timing has not changed if + * it is a switch error. + */ + if (err == -EBADMSG) + mmc_set_timing(host, old_timing); + } +err: + if (err) { + /* fall back to the old signal voltage, if fails report error */ + if (mmc_set_signal_voltage(host, old_signal_voltage)) + err = -EIO; + + pr_err("%s: %s failed, error %d\n", mmc_hostname(card->host), + __func__, err); + } + return err; +} + +/* + * Activate High Speed, HS200 or HS400ES mode if supported. + */ +static int mmc_select_timing(struct mmc_card *card) +{ + int err = 0; + + if (!mmc_can_ext_csd(card)) + goto bus_speed; + + if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS400ES) + err = mmc_select_hs400es(card); + else if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200) + err = mmc_select_hs200(card); + else if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS) + err = mmc_select_hs(card); + + if (err && err != -EBADMSG) + return err; + +bus_speed: + /* + * Set the bus speed to the selected bus timing. + * If timing is not selected, backward compatible is the default. + */ + mmc_set_bus_speed(card); + return 0; +} + +/* + * Execute tuning sequence to seek the proper bus operating + * conditions for HS200 and HS400, which sends CMD21 to the device. + */ +static int mmc_hs200_tuning(struct mmc_card *card) +{ + struct mmc_host *host = card->host; + + /* + * Timing should be adjusted to the HS400 target + * operation frequency for tuning process + */ + if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS400 && + host->ios.bus_width == MMC_BUS_WIDTH_8) + if (host->ops->prepare_hs400_tuning) + host->ops->prepare_hs400_tuning(host, &host->ios); + + return mmc_execute_tuning(card); +} + +/* + * Handle the detection and initialisation of a card. + * + * In the case of a resume, "oldcard" will contain the card + * we're trying to reinitialise. + */ +static int mmc_init_card(struct mmc_host *host, u32 ocr, + struct mmc_card *oldcard) +{ + struct mmc_card *card; + int err; + u32 cid[4]; + u32 rocr; + + WARN_ON(!host->claimed); + + /* Set correct bus mode for MMC before attempting init */ + if (!mmc_host_is_spi(host)) + mmc_set_bus_mode(host, MMC_BUSMODE_OPENDRAIN); + + /* + * Since we're changing the OCR value, we seem to + * need to tell some cards to go back to the idle + * state. We wait 1ms to give cards time to + * respond. + * mmc_go_idle is needed for eMMC that are asleep + */ + mmc_go_idle(host); + + /* The extra bit indicates that we support high capacity */ + err = mmc_send_op_cond(host, ocr | (1 << 30), &rocr); + if (err) + goto err; + + /* + * For SPI, enable CRC as appropriate. + */ + if (mmc_host_is_spi(host)) { + err = mmc_spi_set_crc(host, use_spi_crc); + if (err) + goto err; + } + + /* + * Fetch CID from card. + */ + err = mmc_send_cid(host, cid); + if (err) + goto err; + + if (oldcard) { + if (memcmp(cid, oldcard->raw_cid, sizeof(cid)) != 0) { + err = -ENOENT; + goto err; + } + + card = oldcard; + } else { + /* + * Allocate card structure. + */ + card = mmc_alloc_card(host, &mmc_type); + if (IS_ERR(card)) { + err = PTR_ERR(card); + goto err; + } + + card->ocr = ocr; + card->type = MMC_TYPE_MMC; + card->rca = 1; + memcpy(card->raw_cid, cid, sizeof(card->raw_cid)); + } + + /* + * Call the optional HC's init_card function to handle quirks. + */ + if (host->ops->init_card) + host->ops->init_card(host, card); + + /* + * For native busses: set card RCA and quit open drain mode. + */ + if (!mmc_host_is_spi(host)) { + err = mmc_set_relative_addr(card); + if (err) + goto free_card; + + mmc_set_bus_mode(host, MMC_BUSMODE_PUSHPULL); + } + + if (!oldcard) { + /* + * Fetch CSD from card. + */ + err = mmc_send_csd(card, card->raw_csd); + if (err) + goto free_card; + + err = mmc_decode_csd(card); + if (err) + goto free_card; + err = mmc_decode_cid(card); + if (err) + goto free_card; + } + + /* + * handling only for cards supporting DSR and hosts requesting + * DSR configuration + */ + if (card->csd.dsr_imp && host->dsr_req) + mmc_set_dsr(host); + + /* + * Select card, as all following commands rely on that. + */ + if (!mmc_host_is_spi(host)) { + err = mmc_select_card(card); + if (err) + goto free_card; + } + + if (!oldcard) { + /* Read extended CSD. */ + err = mmc_read_ext_csd(card); + if (err) + goto free_card; + + /* + * If doing byte addressing, check if required to do sector + * addressing. Handle the case of <2GB cards needing sector + * addressing. See section 8.1 JEDEC Standard JED84-A441; + * ocr register has bit 30 set for sector addressing. + */ + if (rocr & BIT(30)) + mmc_card_set_blockaddr(card); + + /* Erase size depends on CSD and Extended CSD */ + mmc_set_erase_size(card); + } + + /* Enable ERASE_GRP_DEF. This bit is lost after a reset or power off. */ + if (card->ext_csd.rev >= 3) { + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_ERASE_GROUP_DEF, 1, + card->ext_csd.generic_cmd6_time); + + if (err && err != -EBADMSG) + goto free_card; + + if (err) { + err = 0; + /* + * Just disable enhanced area off & sz + * will try to enable ERASE_GROUP_DEF + * during next time reinit + */ + card->ext_csd.enhanced_area_offset = -EINVAL; + card->ext_csd.enhanced_area_size = -EINVAL; + } else { + card->ext_csd.erase_group_def = 1; + /* + * enable ERASE_GRP_DEF successfully. + * This will affect the erase size, so + * here need to reset erase size + */ + mmc_set_erase_size(card); + } + } + + /* + * Ensure eMMC user default partition is enabled + */ + if (card->ext_csd.part_config & EXT_CSD_PART_CONFIG_ACC_MASK) { + card->ext_csd.part_config &= ~EXT_CSD_PART_CONFIG_ACC_MASK; + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_PART_CONFIG, + card->ext_csd.part_config, + card->ext_csd.part_time); + if (err && err != -EBADMSG) + goto free_card; + } + + /* + * Enable power_off_notification byte in the ext_csd register + */ + if (card->ext_csd.rev >= 6) { + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_POWER_OFF_NOTIFICATION, + EXT_CSD_POWER_ON, + card->ext_csd.generic_cmd6_time); + if (err && err != -EBADMSG) + goto free_card; + + /* + * The err can be -EBADMSG or 0, + * so check for success and update the flag + */ + if (!err) + card->ext_csd.power_off_notification = EXT_CSD_POWER_ON; + } + + /* + * Select timing interface + */ + err = mmc_select_timing(card); + if (err) + goto free_card; + + if (mmc_card_hs200(card)) { + err = mmc_hs200_tuning(card); + if (err) + goto free_card; + + err = mmc_select_hs400(card); + if (err) + goto free_card; + } else if (!mmc_card_hs400es(card)) { + /* Select the desired bus width optionally */ + err = mmc_select_bus_width(card); + if (err > 0 && mmc_card_hs(card)) { + err = mmc_select_hs_ddr(card); + if (err) + goto free_card; + } + } + + /* + * Choose the power class with selected bus interface + */ + mmc_select_powerclass(card); + + /* + * Enable HPI feature (if supported) + */ + if (card->ext_csd.hpi) { + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_HPI_MGMT, 1, + card->ext_csd.generic_cmd6_time); + if (err && err != -EBADMSG) + goto free_card; + if (err) { + pr_warn("%s: Enabling HPI failed\n", + mmc_hostname(card->host)); + card->ext_csd.hpi_en = 0; + err = 0; + } else { + card->ext_csd.hpi_en = 1; + } + } + + /* + * If cache size is higher than 0, this indicates the existence of cache + * and it can be turned on. Note that some eMMCs from Micron has been + * reported to need ~800 ms timeout, while enabling the cache after + * sudden power failure tests. Let's extend the timeout to a minimum of + * DEFAULT_CACHE_EN_TIMEOUT_MS and do it for all cards. + */ + if (card->ext_csd.cache_size > 0) { + unsigned int timeout_ms = MIN_CACHE_EN_TIMEOUT_MS; + + timeout_ms = max(card->ext_csd.generic_cmd6_time, timeout_ms); + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_CACHE_CTRL, 1, timeout_ms); + if (err && err != -EBADMSG) + goto free_card; + + /* + * Only if no error, cache is turned on successfully. + */ + if (err) { + pr_warn("%s: Cache is supported, but failed to turn on (%d)\n", + mmc_hostname(card->host), err); + card->ext_csd.cache_ctrl = 0; + err = 0; + } else { + card->ext_csd.cache_ctrl = 1; + } + } + + /* + * Enable Command Queue if supported. Note that Packed Commands cannot + * be used with Command Queue. + */ + card->ext_csd.cmdq_en = false; + if (card->ext_csd.cmdq_support && host->caps2 & MMC_CAP2_CQE) { + err = mmc_cmdq_enable(card); + if (err && err != -EBADMSG) + goto free_card; + if (err) { + pr_warn("%s: Enabling CMDQ failed\n", + mmc_hostname(card->host)); + card->ext_csd.cmdq_support = false; + card->ext_csd.cmdq_depth = 0; + err = 0; + } + } + /* + * In some cases (e.g. RPMB or mmc_test), the Command Queue must be + * disabled for a time, so a flag is needed to indicate to re-enable the + * Command Queue. + */ + card->reenable_cmdq = card->ext_csd.cmdq_en; + + if (card->ext_csd.cmdq_en && !host->cqe_enabled) { + err = host->cqe_ops->cqe_enable(host, card); + if (err) { + pr_err("%s: Failed to enable CQE, error %d\n", + mmc_hostname(host), err); + } else { + host->cqe_enabled = true; + pr_info("%s: Command Queue Engine enabled\n", + mmc_hostname(host)); + } + } + + if (host->caps2 & MMC_CAP2_AVOID_3_3V && + host->ios.signal_voltage == MMC_SIGNAL_VOLTAGE_330) { + pr_err("%s: Host failed to negotiate down from 3.3V\n", + mmc_hostname(host)); + err = -EINVAL; + goto free_card; + } + + if (!oldcard) + host->card = card; + + return 0; + +free_card: + if (!oldcard) + mmc_remove_card(card); +err: + return err; +} + +static int mmc_can_sleep(struct mmc_card *card) +{ + return (card && card->ext_csd.rev >= 3); +} + +static int mmc_sleep(struct mmc_host *host) +{ + struct mmc_command cmd = {}; + struct mmc_card *card = host->card; + unsigned int timeout_ms = DIV_ROUND_UP(card->ext_csd.sa_timeout, 10000); + int err; + + /* Re-tuning can't be done once the card is deselected */ + mmc_retune_hold(host); + + err = mmc_deselect_cards(host); + if (err) + goto out_release; + + cmd.opcode = MMC_SLEEP_AWAKE; + cmd.arg = card->rca << 16; + cmd.arg |= 1 << 15; + + /* + * If the max_busy_timeout of the host is specified, validate it against + * the sleep cmd timeout. A failure means we need to prevent the host + * from doing hw busy detection, which is done by converting to a R1 + * response instead of a R1B. Note, some hosts requires R1B, which also + * means they are on their own when it comes to deal with the busy + * timeout. + */ + if (!(host->caps & MMC_CAP_NEED_RSP_BUSY) && host->max_busy_timeout && + (timeout_ms > host->max_busy_timeout)) { + cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; + } else { + cmd.flags = MMC_RSP_R1B | MMC_CMD_AC; + cmd.busy_timeout = timeout_ms; + } + + err = mmc_wait_for_cmd(host, &cmd, 0); + if (err) + goto out_release; + + /* + * If the host does not wait while the card signals busy, then we will + * will have to wait the sleep/awake timeout. Note, we cannot use the + * SEND_STATUS command to poll the status because that command (and most + * others) is invalid while the card sleeps. + */ + if (!cmd.busy_timeout || !(host->caps & MMC_CAP_WAIT_WHILE_BUSY)) + mmc_delay(timeout_ms); + +out_release: + mmc_retune_release(host); + return err; +} + +static int mmc_can_poweroff_notify(const struct mmc_card *card) +{ + return card && + mmc_card_mmc(card) && + (card->ext_csd.power_off_notification == EXT_CSD_POWER_ON); +} + +static int mmc_poweroff_notify(struct mmc_card *card, unsigned int notify_type) +{ + unsigned int timeout = card->ext_csd.generic_cmd6_time; + int err; + + /* Use EXT_CSD_POWER_OFF_SHORT as default notification type. */ + if (notify_type == EXT_CSD_POWER_OFF_LONG) + timeout = card->ext_csd.power_off_longtime; + + err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_POWER_OFF_NOTIFICATION, + notify_type, timeout, 0, true, false, false); + if (err) + pr_err("%s: Power Off Notification timed out, %u\n", + mmc_hostname(card->host), timeout); + + /* Disable the power off notification after the switch operation. */ + card->ext_csd.power_off_notification = EXT_CSD_NO_POWER_NOTIFICATION; + + return err; +} + +/* + * Host is being removed. Free up the current card. + */ +static void mmc_remove(struct mmc_host *host) +{ + mmc_remove_card(host->card); + host->card = NULL; +} + +/* + * Card detection - card is alive. + */ +static int mmc_alive(struct mmc_host *host) +{ + return mmc_send_status(host->card, NULL); +} + +/* + * Card detection callback from host. + */ +static void mmc_detect(struct mmc_host *host) +{ + int err; + + mmc_get_card(host->card, NULL); + + /* + * Just check if our card has been removed. + */ + err = _mmc_detect_card_removed(host); + + mmc_put_card(host->card, NULL); + + if (err) { + mmc_remove(host); + + mmc_claim_host(host); + mmc_detach_bus(host); + mmc_power_off(host); + mmc_release_host(host); + } +} + +static bool _mmc_cache_enabled(struct mmc_host *host) +{ + return host->card->ext_csd.cache_size > 0 && + host->card->ext_csd.cache_ctrl & 1; +} + +static int _mmc_suspend(struct mmc_host *host, bool is_suspend) +{ + int err = 0; + unsigned int notify_type = is_suspend ? EXT_CSD_POWER_OFF_SHORT : + EXT_CSD_POWER_OFF_LONG; + + mmc_claim_host(host); + + if (mmc_card_suspended(host->card)) + goto out; + + err = mmc_flush_cache(host->card); + if (err) + goto out; + + if (mmc_can_poweroff_notify(host->card) && + ((host->caps2 & MMC_CAP2_FULL_PWR_CYCLE) || !is_suspend)) + err = mmc_poweroff_notify(host->card, notify_type); + else if (mmc_can_sleep(host->card)) + err = mmc_sleep(host); + else if (!mmc_host_is_spi(host)) + err = mmc_deselect_cards(host); + + if (!err) { + mmc_power_off(host); + mmc_card_set_suspended(host->card); + } +out: + mmc_release_host(host); + return err; +} + +/* + * Suspend callback + */ +static int mmc_suspend(struct mmc_host *host) +{ + int err; + + err = _mmc_suspend(host, true); + if (!err) { + pm_runtime_disable(&host->card->dev); + pm_runtime_set_suspended(&host->card->dev); + } + + return err; +} + +/* + * This function tries to determine if the same card is still present + * and, if so, restore all state to it. + */ +static int _mmc_resume(struct mmc_host *host) +{ + int err = 0; + + mmc_claim_host(host); + + if (!mmc_card_suspended(host->card)) + goto out; + + mmc_power_up(host, host->card->ocr); + err = mmc_init_card(host, host->card->ocr, host->card); + mmc_card_clr_suspended(host->card); + +out: + mmc_release_host(host); + return err; +} + +/* + * Shutdown callback + */ +static int mmc_shutdown(struct mmc_host *host) +{ + int err = 0; + + /* + * In a specific case for poweroff notify, we need to resume the card + * before we can shutdown it properly. + */ + if (mmc_can_poweroff_notify(host->card) && + !(host->caps2 & MMC_CAP2_FULL_PWR_CYCLE)) + err = _mmc_resume(host); + + if (!err) + err = _mmc_suspend(host, false); + + return err; +} + +/* + * Callback for resume. + */ +static int mmc_resume(struct mmc_host *host) +{ + pm_runtime_enable(&host->card->dev); + return 0; +} + +/* + * Callback for runtime_suspend. + */ +static int mmc_runtime_suspend(struct mmc_host *host) +{ + int err; + + if (!(host->caps & MMC_CAP_AGGRESSIVE_PM)) + return 0; + + err = _mmc_suspend(host, true); + if (err) + pr_err("%s: error %d doing aggressive suspend\n", + mmc_hostname(host), err); + + return err; +} + +/* + * Callback for runtime_resume. + */ +static int mmc_runtime_resume(struct mmc_host *host) +{ + int err; + + err = _mmc_resume(host); + if (err && err != -ENOMEDIUM) + pr_err("%s: error %d doing runtime resume\n", + mmc_hostname(host), err); + + return 0; +} + +static int mmc_can_reset(struct mmc_card *card) +{ + u8 rst_n_function; + + rst_n_function = card->ext_csd.rst_n_function; + if ((rst_n_function & EXT_CSD_RST_N_EN_MASK) != EXT_CSD_RST_N_ENABLED) + return 0; + return 1; +} + +static int _mmc_hw_reset(struct mmc_host *host) +{ + struct mmc_card *card = host->card; + + /* + * In the case of recovery, we can't expect flushing the cache to work + * always, but we have a go and ignore errors. + */ + mmc_flush_cache(host->card); + + if ((host->caps & MMC_CAP_HW_RESET) && host->ops->hw_reset && + mmc_can_reset(card)) { + /* If the card accept RST_n signal, send it. */ + mmc_set_clock(host, host->f_init); + host->ops->hw_reset(host); + /* Set initial state and call mmc_set_ios */ + mmc_set_initial_state(host); + } else { + /* Do a brute force power cycle */ + mmc_power_cycle(host, card->ocr); + mmc_pwrseq_reset(host); + } + return mmc_init_card(host, card->ocr, card); +} + +static const struct mmc_bus_ops mmc_ops = { + .remove = mmc_remove, + .detect = mmc_detect, + .suspend = mmc_suspend, + .resume = mmc_resume, + .runtime_suspend = mmc_runtime_suspend, + .runtime_resume = mmc_runtime_resume, + .alive = mmc_alive, + .shutdown = mmc_shutdown, + .hw_reset = _mmc_hw_reset, + .cache_enabled = _mmc_cache_enabled, +}; + +/* + * Starting point for MMC card init. + */ +int mmc_attach_mmc(struct mmc_host *host) +{ + int err; + u32 ocr, rocr; + + WARN_ON(!host->claimed); + + /* Set correct bus mode for MMC before attempting attach */ + if (!mmc_host_is_spi(host)) + mmc_set_bus_mode(host, MMC_BUSMODE_OPENDRAIN); + + err = mmc_send_op_cond(host, 0, &ocr); + if (err) + return err; + + mmc_attach_bus(host, &mmc_ops); + if (host->ocr_avail_mmc) + host->ocr_avail = host->ocr_avail_mmc; + + /* + * We need to get OCR a different way for SPI. + */ + if (mmc_host_is_spi(host)) { + err = mmc_spi_read_ocr(host, 1, &ocr); + if (err) + goto err; + } + + rocr = mmc_select_voltage(host, ocr); + + /* + * Can we support the voltage of the card? + */ + if (!rocr) { + err = -EINVAL; + goto err; + } + + /* + * Detect and init the card. + */ + err = mmc_init_card(host, rocr, NULL); + if (err) + goto err; + + mmc_release_host(host); + err = mmc_add_card(host->card); + if (err) + goto remove_card; + + mmc_claim_host(host); + return 0; + +remove_card: + mmc_remove_card(host->card); + mmc_claim_host(host); + host->card = NULL; +err: + mmc_detach_bus(host); + + pr_err("%s: error %d whilst initialising MMC card\n", + mmc_hostname(host), err); + + return err; +} |